microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

i2c-bfin-twi: Add platform_resource interface to support multi-port TWI controllers 

- Dynamic alloc the resource of TWI driver data according to board information
 - TWI register read/write accessor based on dynamic regs_base
 - Support TWI0/TWI1 for BF54x

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Bryan Wu 2008-04-22 22:16:48 +02:00 коммит произвёл Jean Delvare
Родитель 4dd39bb12f
Коммит aa3d020917
2 изменённых файлов: 177 добавлений и 108 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
drivers/i2c/busses/Kconfig
Просмотреть файл

@ -100,7 +100,7 @@ config I2C_AU1550
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
depends on BF534 || BF536 || BF537
depends on BF534 || BF536 || BF537 || BF54x
help
This is the TWI I2C device driver for Blackfin 534/536/537/54x.
This driver can also be built as a module. If so, the module

283
drivers/i2c/busses/i2c-bfin-twi.c
Просмотреть файл

@ -62,43 +62,66 @@ struct bfin_twi_iface {
struct i2c_msg *pmsg;
int msg_num;
int cur_msg;
void __iomem *regs_base;
};
static struct bfin_twi_iface twi_iface;
#define DEFINE_TWI_REG(reg, off) \
static inline u16 read_##reg(struct bfin_twi_iface *iface) \
{ return bfin_read16(iface->regs_base + (off)); } \
static inline void write_##reg(struct bfin_twi_iface *iface, u16 v) \
{ bfin_write16(iface->regs_base + (off), v); }
DEFINE_TWI_REG(CLKDIV, 0x00)
DEFINE_TWI_REG(CONTROL, 0x04)
DEFINE_TWI_REG(SLAVE_CTL, 0x08)
DEFINE_TWI_REG(SLAVE_STAT, 0x0C)
DEFINE_TWI_REG(SLAVE_ADDR, 0x10)
DEFINE_TWI_REG(MASTER_CTL, 0x14)
DEFINE_TWI_REG(MASTER_STAT, 0x18)
DEFINE_TWI_REG(MASTER_ADDR, 0x1C)
DEFINE_TWI_REG(INT_STAT, 0x20)
DEFINE_TWI_REG(INT_MASK, 0x24)
DEFINE_TWI_REG(FIFO_CTL, 0x28)
DEFINE_TWI_REG(FIFO_STAT, 0x2C)
DEFINE_TWI_REG(XMT_DATA8, 0x80)
DEFINE_TWI_REG(XMT_DATA16, 0x84)
DEFINE_TWI_REG(RCV_DATA8, 0x88)
DEFINE_TWI_REG(RCV_DATA16, 0x8C)
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
{
unsigned short twi_int_status = bfin_read_TWI_INT_STAT();
unsigned short mast_stat = bfin_read_TWI_MASTER_STAT();
unsigned short twi_int_status = read_INT_STAT(iface);
unsigned short mast_stat = read_MASTER_STAT(iface);
if (twi_int_status & XMTSERV) {
/* Transmit next data */
if (iface->writeNum > 0) {
bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
}
/* start receive immediately after complete sending in
* combine mode.
*/
else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
| MDIR | RSTART);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | MDIR | RSTART);
else if (iface->manual_stop)
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
| STOP);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg+1 < iface->msg_num)
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
| RSTART);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | RSTART);
SSYNC();
/* Clear status */
bfin_write_TWI_INT_STAT(XMTSERV);
write_INT_STAT(iface, XMTSERV);
SSYNC();
}
if (twi_int_status & RCVSERV) {
if (iface->readNum > 0) {
/* Receive next data */
*(iface->transPtr) = bfin_read_TWI_RCV_DATA8();
*(iface->transPtr) = read_RCV_DATA8(iface);
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
/* Change combine mode into sub mode after
* read first data.
@ -113,33 +136,33 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
iface->transPtr++;
iface->readNum--;
} else if (iface->manual_stop) {
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
| STOP);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
SSYNC();
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg+1 < iface->msg_num) {
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL()
| RSTART);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | RSTART);
SSYNC();
}
/* Clear interrupt source */
bfin_write_TWI_INT_STAT(RCVSERV);
write_INT_STAT(iface, RCVSERV);
SSYNC();
}
if (twi_int_status & MERR) {
bfin_write_TWI_INT_STAT(MERR);
bfin_write_TWI_INT_MASK(0);
bfin_write_TWI_MASTER_STAT(0x3e);
bfin_write_TWI_MASTER_CTL(0);
write_INT_STAT(iface, MERR);
write_INT_MASK(iface, 0);
write_MASTER_STAT(iface, 0x3e);
write_MASTER_CTL(iface, 0);
SSYNC();
iface->result = -EIO;
/* if both err and complete int stats are set, return proper
* results.
*/
if (twi_int_status & MCOMP) {
bfin_write_TWI_INT_STAT(MCOMP);
bfin_write_TWI_INT_MASK(0);
bfin_write_TWI_MASTER_CTL(0);
write_INT_STAT(iface, MCOMP);
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
SSYNC();
/* If it is a quick transfer, only address bug no data,
* not an err, return 1.
@ -156,7 +179,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
return;
}
if (twi_int_status & MCOMP) {
bfin_write_TWI_INT_STAT(MCOMP);
write_INT_STAT(iface, MCOMP);
SSYNC();
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
if (iface->readNum == 0) {
@ -165,23 +188,22 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
*/
iface->readNum = 1;
iface->manual_stop = 1;
bfin_write_TWI_MASTER_CTL(
bfin_read_TWI_MASTER_CTL()
| (0xff << 6));
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | (0xff << 6));
} else {
/* set the readd number in other
* combine mode.
*/
bfin_write_TWI_MASTER_CTL(
(bfin_read_TWI_MASTER_CTL() &
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) &
(~(0xff << 6))) |
( iface->readNum << 6));
(iface->readNum << 6));
}
/* remove restart bit and enable master receive */
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() &
~RSTART);
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() |
MEN | MDIR);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | MEN | MDIR);
SSYNC();
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg+1 < iface->msg_num) {
@ -190,7 +212,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
iface->writeNum = iface->readNum =
iface->pmsg[iface->cur_msg].len;
/* Set Transmit device address */
bfin_write_TWI_MASTER_ADDR(
write_MASTER_ADDR(iface,
iface->pmsg[iface->cur_msg].addr);
if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
iface->read_write = I2C_SMBUS_READ;
@ -198,7 +220,7 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
iface->read_write = I2C_SMBUS_WRITE;
/* Transmit first data */
if (iface->writeNum > 0) {
bfin_write_TWI_XMT_DATA8(
write_XMT_DATA8(iface,
*(iface->transPtr++));
iface->writeNum--;
SSYNC();
@ -206,23 +228,23 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
}
if (iface->pmsg[iface->cur_msg].len <= 255)
bfin_write_TWI_MASTER_CTL(
write_MASTER_CTL(iface,
iface->pmsg[iface->cur_msg].len << 6);
else {
bfin_write_TWI_MASTER_CTL(0xff << 6);
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
}
/* remove restart bit and enable master receive */
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() &
~RSTART);
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() |
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
write_MASTER_CTL(iface, read_MASTER_CTL(iface) |
MEN | ((iface->read_write == I2C_SMBUS_READ) ?
MDIR : 0));
SSYNC();
} else {
iface->result = 1;
bfin_write_TWI_INT_MASK(0);
bfin_write_TWI_MASTER_CTL(0);
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
SSYNC();
complete(&iface->complete);
}
@ -272,12 +294,11 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *pmsg;
int rc = 0;
if (!(bfin_read_TWI_CONTROL() & TWI_ENA))
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) {
while (read_MASTER_STAT(iface) & BUSBUSY)
yield();
}
iface->pmsg = msgs;
iface->msg_num = num;
@ -296,14 +317,14 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
iface->result = 0;
iface->timeout_count = 10;
/* Set Transmit device address */
bfin_write_TWI_MASTER_ADDR(pmsg->addr);
write_MASTER_ADDR(iface, pmsg->addr);
/* FIFO Initiation. Data in FIFO should be
* discarded before start a new operation.
*/
bfin_write_TWI_FIFO_CTL(0x3);
write_FIFO_CTL(iface, 0x3);
SSYNC();
bfin_write_TWI_FIFO_CTL(0);
write_FIFO_CTL(iface, 0);
SSYNC();
if (pmsg->flags & I2C_M_RD)
@ -312,23 +333,23 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
iface->read_write = I2C_SMBUS_WRITE;
/* Transmit first data */
if (iface->writeNum > 0) {
bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
SSYNC();
}
}
/* clear int stat */
bfin_write_TWI_INT_STAT(MERR | MCOMP | XMTSERV | RCVSERV);
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
/* Interrupt mask . Enable XMT, RCV interrupt */
bfin_write_TWI_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV);
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
SSYNC();
if (pmsg->len <= 255)
bfin_write_TWI_MASTER_CTL(pmsg->len << 6);
write_MASTER_CTL(iface, pmsg->len << 6);
else {
bfin_write_TWI_MASTER_CTL(0xff << 6);
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
}
@ -336,7 +357,7 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
add_timer(&iface->timeout_timer);
/* Master enable */
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
SSYNC();
@ -362,12 +383,11 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
struct bfin_twi_iface *iface = adap->algo_data;
int rc = 0;
if (!(bfin_read_TWI_CONTROL() & TWI_ENA))
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) {
while (read_MASTER_STAT(iface) & BUSBUSY)
yield();
}
iface->writeNum = 0;
iface->readNum = 0;
@ -439,15 +459,15 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
/* FIFO Initiation. Data in FIFO should be discarded before
* start a new operation.
*/
bfin_write_TWI_FIFO_CTL(0x3);
write_FIFO_CTL(iface, 0x3);
SSYNC();
bfin_write_TWI_FIFO_CTL(0);
write_FIFO_CTL(iface, 0);
/* clear int stat */
bfin_write_TWI_INT_STAT(MERR|MCOMP|XMTSERV|RCVSERV);
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
/* Set Transmit device address */
bfin_write_TWI_MASTER_ADDR(addr);
write_MASTER_ADDR(iface, addr);
SSYNC();
iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
@ -455,60 +475,64 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
switch (iface->cur_mode) {
case TWI_I2C_MODE_STANDARDSUB:
bfin_write_TWI_XMT_DATA8(iface->command);
bfin_write_TWI_INT_MASK(MCOMP | MERR |
write_XMT_DATA8(iface, iface->command);
write_INT_MASK(iface, MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
SSYNC();
if (iface->writeNum + 1 <= 255)
bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6);
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
else {
bfin_write_TWI_MASTER_CTL(0xff << 6);
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
}
/* Master enable */
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
case TWI_I2C_MODE_COMBINED:
bfin_write_TWI_XMT_DATA8(iface->command);
bfin_write_TWI_INT_MASK(MCOMP | MERR | RCVSERV | XMTSERV);
write_XMT_DATA8(iface, iface->command);
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
SSYNC();
if (iface->writeNum > 0)
bfin_write_TWI_MASTER_CTL((iface->writeNum + 1) << 6);
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
else
bfin_write_TWI_MASTER_CTL(0x1 << 6);
write_MASTER_CTL(iface, 0x1 << 6);
/* Master enable */
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
default:
bfin_write_TWI_MASTER_CTL(0);
write_MASTER_CTL(iface, 0);
if (size != I2C_SMBUS_QUICK) {
/* Don't access xmit data register when this is a
* read operation.
*/
if (iface->read_write != I2C_SMBUS_READ) {
if (iface->writeNum > 0) {
bfin_write_TWI_XMT_DATA8(*(iface->transPtr++));
write_XMT_DATA8(iface,
*(iface->transPtr++));
if (iface->writeNum <= 255)
bfin_write_TWI_MASTER_CTL(iface->writeNum << 6);
write_MASTER_CTL(iface,
iface->writeNum << 6);
else {
bfin_write_TWI_MASTER_CTL(0xff << 6);
write_MASTER_CTL(iface,
0xff << 6);
iface->manual_stop = 1;
}
iface->writeNum--;
} else {
bfin_write_TWI_XMT_DATA8(iface->command);
bfin_write_TWI_MASTER_CTL(1 << 6);
write_XMT_DATA8(iface, iface->command);
write_MASTER_CTL(iface, 1 << 6);
}
} else {
if (iface->readNum > 0 && iface->readNum <= 255)
bfin_write_TWI_MASTER_CTL(iface->readNum << 6);
write_MASTER_CTL(iface,
iface->readNum << 6);
else if (iface->readNum > 255) {
bfin_write_TWI_MASTER_CTL(0xff << 6);
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
} else {
del_timer(&iface->timeout_timer);
@ -516,13 +540,13 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
}
}
}
bfin_write_TWI_INT_MASK(MCOMP | MERR |
write_INT_MASK(iface, MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
SSYNC();
/* Master enable */
bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN |
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
break;
@ -557,10 +581,10 @@ static struct i2c_algorithm bfin_twi_algorithm = {
static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state)
{
/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/
struct bfin_twi_iface *iface = platform_get_drvdata(dev);
/* Disable TWI */
bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() & ~TWI_ENA);
write_CONTROL(iface, read_CONTROL(iface) & ~TWI_ENA);
SSYNC();
return 0;
@ -568,24 +592,53 @@ static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state)
static int i2c_bfin_twi_resume(struct platform_device *dev)
{
/* struct bfin_twi_iface *iface = platform_get_drvdata(dev);*/
struct bfin_twi_iface *iface = platform_get_drvdata(dev);
/* Enable TWI */
bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
SSYNC();
return 0;
}
static int i2c_bfin_twi_probe(struct platform_device *dev)
static int i2c_bfin_twi_probe(struct platform_device *pdev)
{
struct bfin_twi_iface *iface = &twi_iface;
struct bfin_twi_iface *iface;
struct i2c_adapter *p_adap;
struct resource *res;
int rc;
iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
if (!iface) {
dev_err(&pdev->dev, "Cannot allocate memory\n");
rc = -ENOMEM;
goto out_error_nomem;
}
spin_lock_init(&(iface->lock));
init_completion(&(iface->complete));
iface->irq = IRQ_TWI;
/* Find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
rc = -ENOENT;
goto out_error_get_res;
}
iface->regs_base = ioremap(res->start, res->end - res->start + 1);
if (iface->regs_base == NULL) {
dev_err(&pdev->dev, "Cannot map IO\n");
rc = -ENXIO;
goto out_error_ioremap;
}
iface->irq = platform_get_irq(pdev, 0);
if (iface->irq < 0) {
dev_err(&pdev->dev, "No IRQ specified\n");
rc = -ENOENT;
goto out_error_no_irq;
}
init_timer(&(iface->timeout_timer));
iface->timeout_timer.function = bfin_twi_timeout;
@ -593,39 +646,55 @@ static int i2c_bfin_twi_probe(struct platform_device *dev)
p_adap = &iface->adap;
p_adap->id = I2C_HW_BLACKFIN;
p_adap->nr = dev->id;
strlcpy(p_adap->name, dev->name, sizeof(p_adap->name));
p_adap->nr = pdev->id;
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
p_adap->algo_data = iface;
p_adap->class = I2C_CLASS_ALL;
p_adap->dev.parent = &dev->dev;
p_adap->dev.parent = &pdev->dev;
rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
IRQF_DISABLED, dev->name, iface);
IRQF_DISABLED, pdev->name, iface);
if (rc) {
dev_err(&(p_adap->dev), "i2c-bfin-twi: can't get IRQ %d !\n",
iface->irq);
return -ENODEV;
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
rc = -ENODEV;
goto out_error_req_irq;
}
/* Set TWI internal clock as 10MHz */
bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
write_CONTROL(iface, ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F);
/* Set Twi interface clock as specified */
bfin_write_TWI_CLKDIV((( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ )
<< 8) | (( 5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ )
write_CLKDIV(iface, ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ)
<< 8) | ((5*1024 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ)
& 0xFF));
/* Enable TWI */
bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA);
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
SSYNC();
rc = i2c_add_numbered_adapter(p_adap);
if (rc < 0)
free_irq(iface->irq, iface);
else
platform_set_drvdata(dev, iface);
if (rc < 0) {
dev_err(&pdev->dev, "Can't add i2c adapter!\n");
goto out_error_add_adapter;
}
platform_set_drvdata(pdev, iface);
dev_info(&pdev->dev, "Blackfin I2C TWI controller, regs_base@%p\n",
iface->regs_base);
return 0;
out_error_add_adapter:
free_irq(iface->irq, iface);
out_error_req_irq:
out_error_no_irq:
iounmap(iface->regs_base);
out_error_ioremap:
out_error_get_res:
kfree(iface);
out_error_nomem:
return rc;
}
@ -637,6 +706,8 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
i2c_del_adapter(&(iface->adap));
free_irq(iface->irq, iface);
iounmap(iface->regs_base);
kfree(iface);
return 0;
}
@ -654,8 +725,6 @@ static struct platform_driver i2c_bfin_twi_driver = {
static int __init i2c_bfin_twi_init(void)
{
pr_info("I2C: Blackfin I2C TWI driver\n");
return platform_driver_register(&i2c_bfin_twi_driver);
}