rsi: Clean up loop in the interrupt handler

The inner do { ... } while loop is completely useless, all it does
is iterate over a switch-case statement, one bit at a time. This
can easily be replaced by simple if (status & bit) { ... } tests
for each bit. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201103180941.443528-2-marex@denx.de

drivers/net/wireless/rsi/rsi_91x_sdio_ops.c

@@ -236,7 +236,6 @@ static void rsi_rx_handler(struct rsi_hw *adapter)
 	struct rsi_91x_sdiodev *dev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	int status;
-	enum sdio_interrupt_type isr_type;
 	u8 isr_status = 0;
 	u8 fw_status = 0;
 
@@ -267,73 +266,69 @@ static void rsi_rx_handler(struct rsi_hw *adapter)
 			__func__, isr_status, (1 << MSDU_PKT_PENDING),
 			(1 << FW_ASSERT_IND));
 
-		do {
-			RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);
-
-			switch (isr_type) {
-			case BUFFER_AVAILABLE:
-				status = rsi_sdio_check_buffer_status(adapter,
-								      0);
-				if (status < 0)
-					rsi_dbg(ERR_ZONE,
-						"%s: Failed to check buffer status\n",
-						__func__);
-				rsi_sdio_ack_intr(common->priv,
-						  (1 << PKT_BUFF_AVAILABLE));
-				rsi_set_event(&common->tx_thread.event);
-
-				rsi_dbg(ISR_ZONE,
-					"%s: ==> BUFFER_AVAILABLE <==\n",
-					__func__);
-				dev->buff_status_updated = true;
-				break;
-
-			case FIRMWARE_ASSERT_IND:
+		if (isr_status & BIT(PKT_BUFF_AVAILABLE)) {
+			status = rsi_sdio_check_buffer_status(adapter, 0);
+			if (status < 0)
 				rsi_dbg(ERR_ZONE,
-					"%s: ==> FIRMWARE Assert <==\n",
+					"%s: Failed to check buffer status\n",
 					__func__);
-				status = rsi_sdio_read_register(common->priv,
+			rsi_sdio_ack_intr(common->priv,
+					  BIT(PKT_BUFF_AVAILABLE));
+			rsi_set_event(&common->tx_thread.event);
+
+			rsi_dbg(ISR_ZONE, "%s: ==> BUFFER_AVAILABLE <==\n",
+				__func__);
+			dev->buff_status_updated = true;
+
+			isr_status &= ~BIT(PKT_BUFF_AVAILABLE);
+		}
+
+		if (isr_status & BIT(FW_ASSERT_IND)) {
+			rsi_dbg(ERR_ZONE, "%s: ==> FIRMWARE Assert <==\n",
+				__func__);
+			status = rsi_sdio_read_register(common->priv,
 							SDIO_FW_STATUS_REG,
 							&fw_status);
-				if (status) {
-					rsi_dbg(ERR_ZONE,
-						"%s: Failed to read f/w reg\n",
-						__func__);
-				} else {
-					rsi_dbg(ERR_ZONE,
-						"%s: Firmware Status is 0x%x\n",
-						__func__ , fw_status);
-					rsi_sdio_ack_intr(common->priv,
-							  (1 << FW_ASSERT_IND));
-				}
-
-				common->fsm_state = FSM_CARD_NOT_READY;
-				break;
-
-			case MSDU_PACKET_PENDING:
-				rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
-				dev->rx_info.total_sdio_msdu_pending_intr++;
-
-				status = rsi_process_pkt(common);
-				if (status) {
-					rsi_dbg(ERR_ZONE,
-						"%s: Failed to read pkt\n",
-						__func__);
-					mutex_unlock(&common->rx_lock);
-					return;
-				}
-				break;
-			default:
-				rsi_sdio_ack_intr(common->priv, isr_status);
-				dev->rx_info.total_sdio_unknown_intr++;
-				isr_status = 0;
-				rsi_dbg(ISR_ZONE,
-					"Unknown Interrupt %x\n",
-					isr_status);
-				break;
+			if (status) {
+				rsi_dbg(ERR_ZONE,
+					"%s: Failed to read f/w reg\n",
+					__func__);
+			} else {
+				rsi_dbg(ERR_ZONE,
+					"%s: Firmware Status is 0x%x\n",
+					__func__, fw_status);
+				rsi_sdio_ack_intr(common->priv,
+						  BIT(FW_ASSERT_IND));
 			}
-			isr_status ^= BIT(isr_type - 1);
-		} while (isr_status);
+
+			common->fsm_state = FSM_CARD_NOT_READY;
+
+			isr_status &= ~BIT(FW_ASSERT_IND);
+		}
+
+		if (isr_status & BIT(MSDU_PKT_PENDING)) {
+			rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
+			dev->rx_info.total_sdio_msdu_pending_intr++;
+
+			status = rsi_process_pkt(common);
+			if (status) {
+				rsi_dbg(ERR_ZONE, "%s: Failed to read pkt\n",
+					__func__);
+				mutex_unlock(&common->rx_lock);
+				return;
+			}
+
+			isr_status &= ~BIT(MSDU_PKT_PENDING);
+		}
+
+		if (isr_status) {
+			rsi_sdio_ack_intr(common->priv, isr_status);
+			dev->rx_info.total_sdio_unknown_intr++;
+			isr_status = 0;
+			rsi_dbg(ISR_ZONE, "Unknown Interrupt %x\n",
+				isr_status);
+		}
+
 		mutex_unlock(&common->rx_lock);
 	} while (1);
 }