i2c: Delete unused i2c-algo-sgi helper module

The i2c-algo-sgi code was merged into the vino driver, so we can
delete it now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/i2c/algos/Kconfig

@@ -14,8 +14,4 @@ config I2C_ALGOPCF
 config I2C_ALGOPCA
 	tristate "I2C PCA 9564 interfaces"
 
-config I2C_ALGO_SGI
-	tristate
-	depends on SGI_IP22 || SGI_IP32 || X86_VISWS
-
 endmenu

drivers/i2c/algos/Makefile

@@ -5,7 +5,6 @@
 obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
 obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
 obj-$(CONFIG_I2C_ALGOPCA)	+= i2c-algo-pca.o
-obj-$(CONFIG_I2C_ALGO_SGI)	+= i2c-algo-sgi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
 EXTRA_CFLAGS += -DDEBUG

drivers/i2c/algos/i2c-algo-sgi.c

@@ -1,179 +0,0 @@
-/*
- * i2c-algo-sgi.c: i2c driver algorithm used by the VINO (SGI Indy) and
- * MACE (SGI O2) chips.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License version 2 as published by the Free Software Foundation.
- *
- * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-sgi.h>
-
-
-#define SGI_I2C_FORCE_IDLE	(0 << 0)
-#define SGI_I2C_NOT_IDLE	(1 << 0)
-#define SGI_I2C_WRITE		(0 << 1)
-#define SGI_I2C_READ		(1 << 1)
-#define SGI_I2C_RELEASE_BUS	(0 << 2)
-#define SGI_I2C_HOLD_BUS	(1 << 2)
-#define SGI_I2C_XFER_DONE	(0 << 4)
-#define SGI_I2C_XFER_BUSY	(1 << 4)
-#define SGI_I2C_ACK		(0 << 5)
-#define SGI_I2C_NACK		(1 << 5)
-#define SGI_I2C_BUS_OK		(0 << 7)
-#define SGI_I2C_BUS_ERR		(1 << 7)
-
-#define get_control()		adap->getctrl(adap->data)
-#define set_control(val)	adap->setctrl(adap->data, val)
-#define read_data()		adap->rdata(adap->data)
-#define write_data(val)		adap->wdata(adap->data, val)
-
-
-static int wait_xfer_done(struct i2c_algo_sgi_data *adap)
-{
-	int i;
-
-	for (i = 0; i < adap->xfer_timeout; i++) {
-		if ((get_control() & SGI_I2C_XFER_BUSY) == 0)
-			return 0;
-		udelay(1);
-	}
-
-	return -ETIMEDOUT;
-}
-
-static int wait_ack(struct i2c_algo_sgi_data *adap)
-{
-	int i;
-
-	if (wait_xfer_done(adap))
-		return -ETIMEDOUT;
-	for (i = 0; i < adap->ack_timeout; i++) {
-		if ((get_control() & SGI_I2C_NACK) == 0)
-			return 0;
-		udelay(1);
-	}
-
-	return -ETIMEDOUT;
-}
-
-static int force_idle(struct i2c_algo_sgi_data *adap)
-{
-	int i;
-
-	set_control(SGI_I2C_FORCE_IDLE);
-	for (i = 0; i < adap->xfer_timeout; i++) {
-		if ((get_control() & SGI_I2C_NOT_IDLE) == 0)
-			goto out;
-		udelay(1);
-	}
-	return -ETIMEDOUT;
-out:
-	if (get_control() & SGI_I2C_BUS_ERR)
-		return -EIO;
-	return 0;
-}
-
-static int do_address(struct i2c_algo_sgi_data *adap, unsigned int addr,
-		      int rd)
-{
-	if (rd)
-		set_control(SGI_I2C_NOT_IDLE);
-	/* Check if bus is idle, eventually force it to do so */
-	if (get_control() & SGI_I2C_NOT_IDLE)
-		if (force_idle(adap))
-	                return -EIO;
-	/* Write out the i2c chip address and specify operation */
-	set_control(SGI_I2C_HOLD_BUS | SGI_I2C_WRITE | SGI_I2C_NOT_IDLE);
-	if (rd)
-		addr |= 1;
-	write_data(addr);
-	if (wait_ack(adap))
-		return -EIO;
-	return 0;
-}
-
-static int i2c_read(struct i2c_algo_sgi_data *adap, unsigned char *buf,
-		    unsigned int len)
-{
-	int i;
-
-	set_control(SGI_I2C_HOLD_BUS | SGI_I2C_READ | SGI_I2C_NOT_IDLE);
-	for (i = 0; i < len; i++) {
-		if (wait_xfer_done(adap))
-			return -EIO;
-		buf[i] = read_data();
-	}
-	set_control(SGI_I2C_RELEASE_BUS | SGI_I2C_FORCE_IDLE);
-
-	return 0;
-
-}
-
-static int i2c_write(struct i2c_algo_sgi_data *adap, unsigned char *buf,
-		     unsigned int len)
-{
-	int i;
-
-	/* We are already in write state */
-	for (i = 0; i < len; i++) {
-		write_data(buf[i]);
-		if (wait_ack(adap))
-			return -EIO;
-	}
-	return 0;
-}
-
-static int sgi_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
-		    int num)
-{
-	struct i2c_algo_sgi_data *adap = i2c_adap->algo_data;
-	struct i2c_msg *p;
-	int i, err = 0;
-
-	for (i = 0; !err && i < num; i++) {
-		p = &msgs[i];
-		err = do_address(adap, p->addr, p->flags & I2C_M_RD);
-		if (err || !p->len)
-			continue;
-		if (p->flags & I2C_M_RD)
-			err = i2c_read(adap, p->buf, p->len);
-		else
-			err = i2c_write(adap, p->buf, p->len);
-	}
-
-	return (err < 0) ? err : i;
-}
-
-static u32 sgi_func(struct i2c_adapter *adap)
-{
-	return I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm sgi_algo = {
-	.master_xfer	= sgi_xfer,
-	.functionality	= sgi_func,
-};
-
-/*
- * registering functions to load algorithms at runtime
- */
-int i2c_sgi_add_bus(struct i2c_adapter *adap)
-{
-	adap->algo = &sgi_algo;
-
-	return i2c_add_adapter(adap);
-}
-EXPORT_SYMBOL(i2c_sgi_add_bus);
-
-MODULE_AUTHOR("Ladislav Michl <ladis@linux-mips.org>");
-MODULE_DESCRIPTION("I2C-Bus SGI algorithm");
-MODULE_LICENSE("GPL");

include/linux/i2c-algo-sgi.h

@@ -1,26 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License version 2 as published by the Free Software Foundation.
- *
- * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
- */
-
-#ifndef I2C_ALGO_SGI_H
-#define I2C_ALGO_SGI_H 1
-
-#include <linux/i2c.h>
-
-struct i2c_algo_sgi_data {
-	void *data;	/* private data for lowlevel routines */
-	unsigned (*getctrl)(void *data);
-	void (*setctrl)(void *data, unsigned val);
-	unsigned (*rdata)(void *data);
-	void (*wdata)(void *data, unsigned val);
-
-	int xfer_timeout;
-	int ack_timeout;
-};
-
-int i2c_sgi_add_bus(struct i2c_adapter *);
-
-#endif /* I2C_ALGO_SGI_H */