ARM: SAMSUNG: move S5PC100 support from plat-s5pc1xx to plat-s5p framework

This patch moves S5PC100 SoC support to plat-s5p framework. Most
periperal support code has been already moved from plat-s5pc1xx to
mach-s5pc100.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Marek Szyprowski 2010-05-20 07:51:08 +02:00 коммит произвёл Ben Dooks
Родитель 2af716ba77
Коммит acc84707d3
21 изменённых файлов: 262 добавлений и 198 удалений

Просмотреть файл

@ -699,14 +699,14 @@ config ARCH_S5P6442
help
Samsung S5P6442 CPU based systems
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
config ARCH_S5PC100
bool "Samsung S5PC100"
select GENERIC_GPIO
select HAVE_CLK
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
help
Samsung S5PC1XX series based systems
Samsung S5PC100 series based systems
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
@ -890,7 +890,6 @@ source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
@ -909,9 +908,7 @@ source "arch/arm/mach-s5p6440/Kconfig"
source "arch/arm/mach-s5p6442/Kconfig"
if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif
source "arch/arm/mach-s5pv210/Kconfig"

Просмотреть файл

@ -167,7 +167,7 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
@ -192,7 +192,6 @@ plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung
plat-$(CONFIG_PLAT_S5P) := s5p samsung
ifeq ($(CONFIG_ARCH_EBSA110),y)

Просмотреть файл

@ -5,10 +5,11 @@
# Configuration options for the S5PC100 CPU
if ARCH_S5PC100
config CPU_S5PC100
bool
select CPU_S5PC100_INIT
select CPU_S5PC100_CLOCK
select PLAT_S5P
help
Enable S5PC100 CPU support
@ -46,3 +47,5 @@ config MACH_SMDKC100
select S5PC100_SETUP_SDHCI
help
Machine support for the Samsung SMDKC100
endif

Просмотреть файл

@ -11,7 +11,7 @@ obj- :=
# Core support for S5PC100 system
obj-$(CONFIG_CPU_S5PC100) += cpu.o gpiolib.o
obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o
obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
# Helper and device support
@ -22,4 +22,5 @@ obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# machine support
obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o

Просмотреть файл

@ -22,47 +22,53 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/proc-fns.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <plat/regs-power.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/sdhci.h>
#include <plat/s5pc100.h>
/* Initial IO mappings */
static struct map_desc s5pc100_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)VA_VIC2,
.pfn = __phys_to_pfn(S5PC100_PA_VIC2),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5PC100_VA_OTHERS,
.pfn = __phys_to_pfn(S5PC100_PA_OTHERS),
.length = SZ_4K,
.type = MT_DEVICE,
}
};
static void s5pc100_idle(void)
{
unsigned long tmp;
if (!need_resched())
cpu_do_idle();
tmp = __raw_readl(S5PC100_PWR_CFG);
tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
__raw_writel(tmp, S5PC100_PWR_CFG);
tmp = __raw_readl(S5PC100_OTHERS);
tmp |= S5PC100_PMU_INT_DISABLE;
__raw_writel(tmp, S5PC100_OTHERS);
cpu_do_idle();
local_irq_enable();
}
/* s5pc100_map_io
@ -86,22 +92,23 @@ void __init s5pc100_map_io(void)
void __init s5pc100_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s5pc1xx_register_clocks();
s5p_register_clocks(xtal);
s5pc100_register_clocks();
s5pc100_setup_clocks();
}
void __init s5pc100_init_irq(void)
{
u32 vic_valid[] = {~0, ~0, ~0};
u32 vic[] = {~0, ~0, ~0};
/* VIC0, VIC1, and VIC2 are fully populated. */
s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
struct sysdev_class s5pc100_sysclass = {
static struct sysdev_class s5pc100_sysclass = {
.name = "s5pc100-core",
};
@ -118,9 +125,10 @@ core_initcall(s5pc100_core_init);
int __init s5pc100_init(void)
{
printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
printk(KERN_INFO "S5PC100: Initializing architecture\n");
s5pc1xx_idle = s5pc100_idle;
/* set idle function */
pm_idle = s5pc100_idle;
return sysdev_register(&s5pc100_sysdev);
}

Просмотреть файл

@ -1,10 +1,10 @@
/*
* arch/arm/plat-s5pc1xx/gpiolib.c
* arch/arm/plat-s5pc100/gpiolib.c
*
* Copyright 2009 Samsung Electronics Co
* Kyungmin Park <kyungmin.park@samsung.com>
*
* S5PC1XX - GPIOlib support
* S5PC100 - GPIOlib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -62,12 +62,12 @@
*/
#if 0
static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
{
return S3C_IRQ_GPIO(chip->base + offset);
}
static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
{
int base;
@ -382,8 +382,8 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
};
/* FIXME move from irq-gpio.c */
extern struct irq_chip s5pc1xx_gpioint;
extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
extern struct irq_chip s5pc100_gpioint;
extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
{
@ -392,21 +392,21 @@ static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
if (chip->config == &gpio_cfg) {
int i, irq;
chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
chip->chip.to_irq = s5pc100_gpiolib_to_irq;
for (i = 0; i < chip->chip.ngpio; i++) {
irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
set_irq_chip(irq, &s5pc1xx_gpioint);
set_irq_chip(irq, &s5pc100_gpioint);
set_irq_data(irq, &chip->chip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
} else if (chip->config == &gpio_cfg_eint)
chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
chip->chip.to_irq = s5pc100_gpiolib_to_eint;
#endif
}
static __init int s5pc1xx_gpiolib_init(void)
static __init int s5pc100_gpiolib_init(void)
{
struct s3c_gpio_chip *chip;
int nr_chips;
@ -421,8 +421,8 @@ static __init int s5pc1xx_gpiolib_init(void)
ARRAY_SIZE(s5pc100_gpio_chips));
#if 0
/* Interrupt */
set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
#endif
return 0;
}
core_initcall(s5pc1xx_gpiolib_init);
core_initcall(s5pc100_gpiolib_init);

Просмотреть файл

@ -22,12 +22,14 @@
* aligned and add in the offset when we load the value here.
*/
.macro addruart, rx, tmp
.macro addruart, rx, rtmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
ldrne \rx, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
/* include the reset of the code which will do the work, we're only

Просмотреть файл

@ -20,7 +20,7 @@
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =S3C_VA_VIC0
ldr \base, =VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
@ -29,18 +29,18 @@
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check the vic0
mov \irqnr, # S3C_IRQ_OFFSET + 31
mov \irqnr, # S5P_IRQ_OFFSET + 31
ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
teq \irqstat, #0
@ otherwise try vic1
addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
addeq \irqnr, \irqnr, #32
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0
@ otherwise try vic2
addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
addeq \irqnr, \irqnr, #32
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0

Просмотреть файл

@ -11,9 +11,106 @@
#include <plat/irqs.h>
/* LCD */
/* VIC0: system, DMA, timer */
#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
#define IRQ_BATF S5P_IRQ_VIC0(17)
#define IRQ_MDMA S5P_IRQ_VIC0(18)
#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
#define IRQ_WDT S5P_IRQ_VIC0(27)
#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
/* VIC1: ARM, power, memory, connectivity */
#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
#define IRQ_ONENAND S5P_IRQ_VIC1(7)
#define IRQ_NFC S5P_IRQ_VIC1(8)
#define IRQ_CFC S5P_IRQ_VIC1(9)
#define IRQ_UART0 S5P_IRQ_VIC1(10)
#define IRQ_UART1 S5P_IRQ_VIC1(11)
#define IRQ_UART2 S5P_IRQ_VIC1(12)
#define IRQ_UART3 S5P_IRQ_VIC1(13)
#define IRQ_IIC S5P_IRQ_VIC1(14)
#define IRQ_SPI0 S5P_IRQ_VIC1(15)
#define IRQ_SPI1 S5P_IRQ_VIC1(16)
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
#define IRQ_CAN0 S5P_IRQ_VIC1(19)
#define IRQ_CAN1 S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
#define IRQ_OTG S5P_IRQ_VIC1(24)
#define IRQ_MSM S5P_IRQ_VIC1(25)
#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
/* VIC2: multimedia, audio, security */
#define IRQ_LCD0 S5P_IRQ_VIC2(0)
#define IRQ_LCD1 S5P_IRQ_VIC2(1)
#define IRQ_LCD2 S5P_IRQ_VIC2(2)
#define IRQ_LCD3 S5P_IRQ_VIC2(3)
#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
#define IRQ_JPEG S5P_IRQ_VIC2(8)
#define IRQ_2D S5P_IRQ_VIC2(9)
#define IRQ_3D S5P_IRQ_VIC2(10)
#define IRQ_MIXER S5P_IRQ_VIC2(11)
#define IRQ_HDMI S5P_IRQ_VIC2(12)
#define IRQ_IIC1 S5P_IRQ_VIC2(13)
#define IRQ_MFC S5P_IRQ_VIC2(14)
#define IRQ_TVENC S5P_IRQ_VIC2(15)
#define IRQ_I2S0 S5P_IRQ_VIC2(16)
#define IRQ_I2S1 S5P_IRQ_VIC2(17)
#define IRQ_I2S2 S5P_IRQ_VIC2(18)
#define IRQ_AC97 S5P_IRQ_VIC2(19)
#define IRQ_PCM0 S5P_IRQ_VIC2(20)
#define IRQ_PCM1 S5P_IRQ_VIC2(21)
#define IRQ_SPDIF S5P_IRQ_VIC2(22)
#define IRQ_ADC S5P_IRQ_VIC2(23)
#define IRQ_PENDN S5P_IRQ_VIC2(24)
#define IRQ_TC IRQ_PENDN
#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
#define IRQ_CG S5P_IRQ_VIC2(26)
#define IRQ_SEC S5P_IRQ_VIC2(27)
#define IRQ_SECRX S5P_IRQ_VIC2(28)
#define IRQ_SECTX S5P_IRQ_VIC2(29)
#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
#define IRQ_VIC_END S5P_IRQ_VIC2(31)
#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \
(S5P_IRQ_EINT_BASE + (x)-16))
#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
#define IRQ_LCD_VSYNC IRQ_LCD1
#define IRQ_LCD_SYSTEM IRQ_LCD2
#endif /* __ASM_ARCH_IRQ_H */
#endif /* __ASM_ARCH_IRQS_H */

Просмотреть файл

@ -3,9 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* Based on mach-s3c6400/include/mach/map.h
*
* S5PC1XX - Memory map definitions
* S5PC100 - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -16,135 +14,59 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
#include <plat/map-s5p.h>
/*
* map-base.h has already defined virtual memory address
* S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s)
* S3C_VA_SYS S3C_ADDR(0x00100000) system control
* S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used)
* S3C_VA_TIMER S3C_ADDR(0x00300000) timer block
* S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog
* S3C_VA_UART S3C_ADDR(0x01000000) UART
*
* S5PC100 specific virtual memory address can be defined here
* S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO
*
*/
/* Chip ID */
#define S5PC100_PA_CHIPID (0xE0000000)
#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID
#define S5PC1XX_VA_CHIPID S3C_VA_SYS
#define S5P_PA_CHIPID S5PC100_PA_CHIPID
/* System */
#define S5PC100_PA_CLK (0xE0100000)
#define S5PC100_PA_CLK_OTHER (0xE0200000)
#define S5PC100_PA_PWR (0xE0108000)
#define S5PC1XX_PA_CLK S5PC100_PA_CLK
#define S5PC1XX_PA_PWR S5PC100_PA_PWR
#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER
#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000)
#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000)
#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000)
#define S5PC100_PA_SYSCON (0xE0100000)
#define S5P_PA_SYSCON S5PC100_PA_SYSCON
#define S5PC100_PA_OTHERS (0xE0200000)
#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000)
/* GPIO */
#define S5PC100_PA_GPIO (0xE0300000)
#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO
#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000)
#define S5P_PA_GPIO S5PC100_PA_GPIO
/* Interrupt */
#define S5PC100_PA_VIC (0xE4000000)
#define S5PC100_VA_VIC S3C_VA_IRQ
#define S5PC100_PA_VIC_OFFSET 0x100000
#define S5PC100_VA_VIC_OFFSET 0x10000
#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
#define S5PC100_PA_VIC0 (0xE4000000)
#define S5P_PA_VIC0 S5PC100_PA_VIC0
/* DMA */
#define S5PC100_PA_MDMA (0xE8100000)
#define S5PC100_PA_PDMA0 (0xE9000000)
#define S5PC100_PA_PDMA1 (0xE9200000)
#define S5PC100_PA_VIC1 (0xE4100000)
#define S5P_PA_VIC1 S5PC100_PA_VIC1
#define S5PC100_PA_VIC2 (0xE4200000)
#define S5P_PA_VIC2 S5PC100_PA_VIC2
/* Timer */
#define S5PC100_PA_TIMER (0xEA000000)
#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER
#define S5PC1XX_VA_TIMER S3C_VA_TIMER
#define S5P_PA_TIMER S5PC100_PA_TIMER
/* RTC */
#define S5PC100_PA_RTC (0xEA300000)
#define S5PC100_PA_SYSTIMER (0xEA100000)
/* UART */
#define S5PC100_PA_UART (0xEC000000)
#define S5PC1XX_PA_UART S5PC100_PA_UART
#define S5PC1XX_VA_UART S3C_VA_UART
/* I2C */
#define S5PC100_PA_I2C (0xEC100000)
#define S5PC100_PA_I2C1 (0xEC200000)
#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0)
#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400)
#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800)
#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00)
#define S5P_SZ_UART SZ_256
/* USB HS OTG */
#define S5PC100_PA_USB_HSOTG (0xED200000)
#define S5PC100_PA_USB_HSPHY (0xED300000)
#define S5PC100_PA_IIC0 (0xEC100000)
#define S5PC100_PA_IIC1 (0xEC200000)
/* SD/MMC */
#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0)
#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1)
#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2)
/* LCD */
#define S5PC100_PA_FB (0xEE000000)
/* Multimedia */
#define S5PC100_PA_G2D (0xEE800000)
#define S5PC100_PA_JPEG (0xEE500000)
#define S5PC100_PA_ROTATOR (0xEE100000)
#define S5PC100_PA_G3D (0xEF000000)
#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
/* I2S */
#define S5PC100_PA_I2S0 (0xF2000000)
#define S5PC100_PA_I2S1 (0xF2100000)
#define S5PC100_PA_I2S2 (0xF2200000)
/* KEYPAD */
#define S5PC100_PA_KEYPAD (0xF3100000)
/* ADC & TouchScreen */
#define S5PC100_PA_TSADC (0xF3000000)
/* ETC */
#define S5PC100_PA_SDRAM (0x20000000)
#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM
#define S5P_PA_SDRAM S5PC100_PA_SDRAM
/* compatibility defines. */
#define S3C_PA_RTC S5PC100_PA_RTC
/* compatibiltiy defines. */
#define S3C_PA_UART S5PC100_PA_UART
#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0)
#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400)
#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800)
#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00)
#define S3C_VA_UART0 (S3C_VA_UART + 0x0)
#define S3C_VA_UART1 (S3C_VA_UART + 0x400)
#define S3C_VA_UART2 (S3C_VA_UART + 0x800)
#define S3C_VA_UART3 (S3C_VA_UART + 0xC00)
#define S3C_UART_OFFSET 0x400
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#define S3C_PA_IIC S5PC100_PA_IIC0
#define S3C_PA_IIC1 S5PC100_PA_IIC1
#define S3C_PA_FB S5PC100_PA_FB
#define S3C_PA_G2D S5PC100_PA_G2D
#define S3C_PA_G3D S5PC100_PA_G3D
#define S3C_PA_JPEG S5PC100_PA_JPEG
#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000)
#define S3C_PA_IIC S5PC100_PA_I2C
#define S3C_PA_IIC1 S5PC100_PA_I2C1
#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0
#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1
#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2
#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
#define S3C_PA_TSADC S5PC100_PA_TSADC
#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
#endif /* __ASM_ARCH_C100_MAP_H */
#endif /* __ASM_ARCH_MAP_H */

Просмотреть файл

@ -17,6 +17,8 @@
#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
#define S5PC100_REG_OTHERS(x) (S5PC100_VA_OTHERS + (x))
#define S5P_APLL_LOCK S5P_CLKREG(0x00)
#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
@ -68,4 +70,8 @@
#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
#define S5PC100_SWRESET_RESETVAL 0xc100
#endif /* __ASM_ARCH_REGS_CLOCK_H */

Просмотреть файл

@ -1,4 +1,4 @@
/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
@ -12,7 +12,7 @@
#include <mach/map.h>
/* S5PC100 */
#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO
#define S5PC100_GPIO_BASE S5P_VA_GPIO
#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000)
#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020)
#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040)
@ -60,7 +60,7 @@
/* Common part */
/* External interrupt base is same at both s5pc100 and s5pc110 */
#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE)
#define S5P_EINT_BASE (S5PC100_EINT_BASE)
#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4))
#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))

Просмотреть файл

@ -3,7 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX - IRQ register definitions
* S5PC100 - IRQ register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -16,9 +16,4 @@
#include <mach/map.h>
#include <asm/hardware/vic.h>
/* interrupt controller */
#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0))
#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1))
#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2))
#endif /* __ASM_ARCH_REGS_IRQ_H */

Просмотреть файл

@ -3,7 +3,7 @@
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC1XX - system implementation
* S5PC100 - system implementation
*
* Based on mach-s3c6400/include/mach/system.h
*/
@ -13,14 +13,11 @@
#include <linux/io.h>
#include <mach/map.h>
#include <plat/regs-clock.h>
void (*s5pc1xx_idle)(void);
#include <mach/regs-clock.h>
static void arch_idle(void)
{
if (s5pc1xx_idle)
s5pc1xx_idle();
/* nothing here yet */
}
static void arch_reset(char mode, const char *cmd)

Просмотреть файл

@ -20,8 +20,8 @@
*/
static inline u32 s3c24xx_ostimer_pending(void)
{
u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0));
u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
}
#define TICK_MAX (0xffffffff)

Просмотреть файл

@ -1,9 +1,8 @@
/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC100 - CPU initialisation (common with other S5PC1XX chips)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -19,9 +18,7 @@
#include <plat/s5pc100.h>
/* uart registration process */
void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */
s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}

Просмотреть файл

@ -149,8 +149,6 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
.setup_gpio = s5pc100_fb_gpio_setup_24bpp,
};
static struct map_desc smdkc100_iodesc[] = {};
static struct platform_device *smdkc100_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
@ -163,7 +161,7 @@ static struct platform_device *smdkc100_devices[] __initdata = {
static void __init smdkc100_map_io(void)
{
s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
}
@ -187,10 +185,9 @@ static void __init smdkc100_machine_init(void)
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
.phys_io = S5PC100_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S5PC100_PA_SDRAM + 0x100,
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,

Просмотреть файл

@ -7,7 +7,7 @@
config PLAT_S5P
bool
depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
default y
select ARM_VIC
select NO_IOPORT

Просмотреть файл

@ -19,12 +19,14 @@
#include <plat/cpu.h>
#include <plat/s5p6440.h>
#include <plat/s5p6442.h>
#include <plat/s5pc100.h>
#include <plat/s5pv210.h>
/* table of supported CPUs */
static const char name_s5p6440[] = "S5P6440";
static const char name_s5p6442[] = "S5P6442";
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static struct cpu_table cpu_ids[] __initdata = {
@ -44,6 +46,14 @@ static struct cpu_table cpu_ids[] __initdata = {
.init_uarts = s5p6442_init_uarts,
.init = s5p6442_init,
.name = name_s5p6442,
}, {
.idcode = 0x43100000,
.idmask = 0xfffff000,
.map_io = s5pc100_map_io,
.init_clocks = s5pc100_init_clocks,
.init_uarts = s5pc100_init_uarts,
.init = s5pc100_init,
.name = name_s5pc100,
}, {
.idcode = 0x43110000,
.idmask = 0xfffff000,

Просмотреть файл

@ -0,0 +1,33 @@
/* arch/arm/plat-s5p/include/plat/s5pc100.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Header file for s5pc100 cpu support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* Common init code for S5PC100 related SoCs */
extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s5pc100_register_clocks(void);
extern void s5pc100_setup_clocks(void);
#ifdef CONFIG_CPU_S5PC100
extern int s5pc100_init(void);
extern void s5pc100_init_irq(void);
extern void s5pc100_map_io(void);
extern void s5pc100_init_clocks(int xtal);
#define s5pc100_init_uarts s5pc100_common_init_uarts
#else
#define s5pc100_init_clocks NULL
#define s5pc100_init_uarts NULL
#define s5pc100_map_io NULL
#define s5pc100_init NULL
#endif

Просмотреть файл

@ -6,7 +6,7 @@
config PLAT_SAMSUNG
bool
depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
select NO_IOPORT
default y
help