sh: pfc: Convert index to field and value pair

Update the way the PFC code is passing bitfield
selection between configure register functions.

Convert the code from using index only to bitfield
number and selected value. First step towards future
variable bitfield width support.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

drivers/sh/pfc.c

@@ -287,7 +287,8 @@ static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
 }
 
 static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id,
-			  struct pinmux_cfg_reg **crp, int *indexp,
+			  struct pinmux_cfg_reg **crp,
+			  int *fieldp, int *valuep,
 			  unsigned long **cntp)
 {
 	struct pinmux_cfg_reg *config_reg;
@@ -306,7 +307,8 @@ static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id,
 		for (n = 0; n < (r_width / f_width) * (1 << f_width); n++) {
 			if (config_reg->enum_ids[n] == enum_id) {
 				*crp = config_reg;
-				*indexp = n;
+				*fieldp = n / (1 << f_width);
+				*valuep = n % (1 << f_width);
 				*cntp = &config_reg->cnt[n / (1 << f_width)];
 				return 0;
 			}
@@ -349,36 +351,22 @@ static int get_gpio_enum_id(struct pinmux_info *gpioc, unsigned gpio,
 
 static void write_config_reg(struct pinmux_info *gpioc,
 			     struct pinmux_cfg_reg *crp,
-			     int index)
+			     int field, int value)
 {
-	unsigned long ncomb, pos, value;
-	void __iomem *mapped_reg;
-
-	ncomb = 1 << crp->field_width;
-	pos = index / ncomb;
-	value = index % ncomb;
-
-	mapped_reg = pfc_phys_to_virt(gpioc, crp->reg);
+	void __iomem *mapped_reg = pfc_phys_to_virt(gpioc, crp->reg);
 
 	gpio_write_reg(mapped_reg, crp->reg_width, crp->field_width,
-		       pos, value, crp->reg);
+		       field, value, crp->reg);
 }
 
 static int check_config_reg(struct pinmux_info *gpioc,
 			    struct pinmux_cfg_reg *crp,
-			    int index)
+			    int field, int value)
 {
-	unsigned long ncomb, pos, value;
-	void __iomem *mapped_reg;
-
-	ncomb = 1 << crp->field_width;
-	pos = index / ncomb;
-	value = index % ncomb;
-
-	mapped_reg = pfc_phys_to_virt(gpioc, crp->reg);
+	void __iomem *mapped_reg = pfc_phys_to_virt(gpioc, crp->reg);
 
 	if (gpio_read_reg(mapped_reg, crp->reg_width,
-			  crp->field_width, pos, crp->reg) == value)
+			  crp->field_width, field, crp->reg) == value)
 		return 0;
 
 	return -1;
@@ -392,7 +380,7 @@ static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
 	struct pinmux_cfg_reg *cr = NULL;
 	pinmux_enum_t enum_id;
 	struct pinmux_range *range;
-	int in_range, pos, index;
+	int in_range, pos, field, value;
 	unsigned long *cntp;
 
 	switch (pinmux_type) {
@@ -423,7 +411,8 @@ static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
 
 	pos = 0;
 	enum_id = 0;
-	index = 0;
+	field = 0;
+	value = 0;
 	while (1) {
 		pos = get_gpio_enum_id(gpioc, gpio, pos, &enum_id);
 		if (pos <= 0)
@@ -470,17 +459,19 @@ static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
 		if (!in_range)
 			continue;
 
-		if (get_config_reg(gpioc, enum_id, &cr, &index, &cntp) != 0)
+		if (get_config_reg(gpioc, enum_id, &cr,
+				   &field, &value, &cntp) != 0)
 			goto out_err;
 
 		switch (cfg_mode) {
 		case GPIO_CFG_DRYRUN:
-			if (!*cntp || !check_config_reg(gpioc, cr, index))
+			if (!*cntp || !check_config_reg(gpioc, cr,
+							field, value))
 				continue;
 			break;
 
 		case GPIO_CFG_REQ:
-			write_config_reg(gpioc, cr, index);
+			write_config_reg(gpioc, cr, field, value);
 			*cntp = *cntp + 1;
 			break;