microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

pwm: imx27: Fix rounding behavior 

To not trigger the warnings provided by CONFIG_PWM_DEBUG

 - use up-rounding in .get_state()
 - don't divide by the result of a division
 - don't use the rounded counter value for the period length to calculate
   the counter value for the duty cycle

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
Uwe Kleine-König 2020-04-16 10:02:45 +02:00 коммит произвёл Thierry Reding
Родитель cad0f29606
Коммит aef1a3799b
1 изменённых файлов: 10 добавлений и 10 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

20
drivers/pwm/pwm-imx27.c
Просмотреть файл

@ -150,13 +150,12 @@ static void pwm_imx27_get_state(struct pwm_chip *chip,
prescaler = MX3_PWMCR_PRESCALER_GET(val);
pwm_clk = clk_get_rate(imx->clk_per);
pwm_clk = DIV_ROUND_CLOSEST_ULL(pwm_clk, prescaler);
val = readl(imx->mmio_base + MX3_PWMPR);
period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
/* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
tmp = NSEC_PER_SEC * (u64)(period + 2);
state->period = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler;
state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk);
/*
* PWMSAR can be read only if PWM is enabled. If the PWM is disabled,
@ -167,8 +166,8 @@ static void pwm_imx27_get_state(struct pwm_chip *chip,
else
val = imx->duty_cycle;
tmp = NSEC_PER_SEC * (u64)(val);
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
tmp = NSEC_PER_SEC * (u64)(val) * prescaler;
state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk);
pwm_imx27_clk_disable_unprepare(imx);
}
@ -220,22 +219,23 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
struct pwm_state cstate;
unsigned long long c;
unsigned long long clkrate;
int ret;
u32 cr;
pwm_get_state(pwm, &cstate);
c = clk_get_rate(imx->clk_per);
c *= state->period;
clkrate = clk_get_rate(imx->clk_per);
c = clkrate * state->period;
do_div(c, 1000000000);
do_div(c, NSEC_PER_SEC);
period_cycles = c;
prescale = period_cycles / 0x10000 + 1;
period_cycles /= prescale;
c = (unsigned long long)period_cycles * state->duty_cycle;
do_div(c, state->period);
c = clkrate * state->duty_cycle;
do_div(c, NSEC_PER_SEC * prescale);
duty_cycles = c;
/*