Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3734/1: Fix the unused variable warning in __iounmap() [ARM] 3737/1: Export ARM copy/clear_user_page symbols [ARM] 3736/1: xscale: don't mis-report 80219 as an iop32x [ARM] 3733/2: S3C24XX: Remove old IDE registers in Anubis [ARM] 3732/1: S3C24XX: tidy syntax in osiris and anubis machines [ARM] Fix SMP booting [ARM] 3731/1: Allow IRQ definitions of IQ80331 and IQ80332 to co-exist [ARM] 3730/1: ep93xx: enable usb ohci driver in the defconfig [ARM] Fix cats build
2006-07-29 22:53:46 -07:00 · 2006-07-29 22:53:46 -07:00 · af652c26f5
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul  9 15:21:30 2006
+# Linux kernel version: 2.6.18-rc1-git9
+# Sat Jul 15 15:08:10 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@ -30,6 +30,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@ -749,7 +750,7 @@ CONFIG_VIDEO_V4L2=y
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
@ -766,6 +767,9 @@ CONFIG_USB_DYNAMIC_MINORS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set

 #
@ -855,6 +859,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
@ -871,7 +876,7 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
@ -916,6 +921,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_DS1307 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
@ -1023,7 +1029,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@ -114,9 +114,9 @@ ENTRY(secondary_startup)
 	 * Use the page tables supplied from  __cpu_up.
 	 */
 	adr	r4, __secondary_data
-	ldmia	r4, {r5, r6, r13}		@ address to jump to after
+	ldmia	r4, {r5, r7, r13}		@ address to jump to after
 	sub	r4, r4, r5			@ mmu has been enabled
-	ldr	r4, [r6, r4]			@ get secondary_data.pgdir
+	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
 	adr	lr, __enable_mmu		@ return address
 	add	pc, r10, #12			@ initialise processor
 						@ (return control reg)
@ -125,7 +125,7 @@ ENTRY(secondary_startup)
 	 * r6  = &secondary_data
 	 */
 ENTRY(__secondary_switched)
-	ldr	sp, [r6, #4]			@ get secondary_data.stack
+	ldr	sp, [r7, #4]			@ get secondary_data.stack
 	mov	fp, #0
 	b	secondary_start_kernel

--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@ -8,7 +8,7 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>

 #include <asm/hardware/dec21285.h>
 #include <asm/io.h>
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@ -60,11 +60,12 @@ static struct map_desc anubis_iodesc[] __initdata = {
 	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
 	.pfn		= __phys_to_pfn(0x0),
 	.length		= SZ_4M,
-	.type		= MT_DEVICE
+	.type		= MT_DEVICE,
  }, {
 	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
 	.pfn		= __phys_to_pfn(0x0),
-	.length 	= SZ_4M, MT_DEVICE
+	.length 	= SZ_4M,
+	.type		= MT_DEVICE,
  },

  /* we could possibly compress the next set down into a set of smaller tables
@ -78,36 +79,12 @@ static struct map_desc anubis_iodesc[] __initdata = {
 	.virtual	= (u32)ANUBIS_VA_CTRL1,
 	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
 	.length		= SZ_4K,
-	.type		= MT_DEVICE
+	.type		= MT_DEVICE,
  }, {
 	.virtual	= (u32)ANUBIS_VA_CTRL2,
 	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL2),
 	.length		= SZ_4K,
-	.type		=MT_DEVICE
-  },
-
-  /* IDE drives */
-
-  {
-	.virtual	= (u32)ANUBIS_IDEPRI,
-	.pfn		= __phys_to_pfn(S3C2410_CS3),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE
-  }, {
-	.virtual	= (u32)ANUBIS_IDEPRIAUX,
-	.pfn		= __phys_to_pfn(S3C2410_CS3+(1<<26)),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE
-  }, {
-	.virtual	= (u32)ANUBIS_IDESEC,
-	.pfn		= __phys_to_pfn(S3C2410_CS4),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE
-  }, {
-	.virtual	= (u32)ANUBIS_IDESECAUX,
-	.pfn		= __phys_to_pfn(S3C2410_CS4+(1<<26)),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE
+	.type		= MT_DEVICE,
  },
 };

@ -126,7 +103,7 @@ static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
 		.name		= "pclk",
 		.divisor	= 1,
 		.min_baud	= 0,
-		.max_baud	= 0.
+		.max_baud	= 0,
 	}
 };

@ -139,7 +116,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = anubis_serial_clocks,
-		.clocks_size = ARRAY_SIZE(anubis_serial_clocks)
+		.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
 	},
 	[1] = {
 		.hwport	     = 2,
@ -148,7 +125,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = anubis_serial_clocks,
-		.clocks_size = ARRAY_SIZE(anubis_serial_clocks)
+		.clocks_size = ARRAY_SIZE(anubis_serial_clocks),
 	},
 };

@ -162,7 +139,7 @@ static struct mtd_partition anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
-		.offset	= 0
+		.offset	= 0,
 	},
 	[1] = {
 		.name	= "/boot",
@ -194,21 +171,21 @@ static struct s3c2410_nand_set anubis_nand_sets[] = {
 		.nr_chips	= 1,
 		.nr_map		= external_map,
 		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part
+		.partitions	= anubis_default_nand_part,
 	},
 	[0] = {
 		.name		= "chip0",
 		.nr_chips	= 1,
 		.nr_map		= chip0_map,
 		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part
+		.partitions	= anubis_default_nand_part,
 	},
 	[2] = {
 		.name		= "chip1",
 		.nr_chips	= 1,
 		.nr_map		= chip1_map,
 		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part
+		.partitions	= anubis_default_nand_part,
 	},
 };

@ -313,7 +290,7 @@ static struct s3c24xx_board anubis_board __initdata = {
 	.devices       = anubis_devices,
 	.devices_count = ARRAY_SIZE(anubis_devices),
 	.clocks	       = anubis_clocks,
-	.clocks_count  = ARRAY_SIZE(anubis_clocks)
+	.clocks_count  = ARRAY_SIZE(anubis_clocks),
 };

 static void __init anubis_map_io(void)
--- a/arch/arm/mach-s3c2410/mach-osiris.c
+++ b/arch/arm/mach-s3c2410/mach-osiris.c
@ -67,12 +67,12 @@ static struct map_desc osiris_iodesc[] __initdata = {
 	  .virtual	= (u32)OSIRIS_VA_CTRL1,
 	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
 	  .length	= SZ_16K,
-	  .type		= MT_DEVICE
+	  .type		= MT_DEVICE,
  }, {
 	  .virtual	= (u32)OSIRIS_VA_CTRL2,
 	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
 	  .length	= SZ_16K,
-	  .type		= MT_DEVICE
+	  .type		= MT_DEVICE,
  },
 };

@ -91,7 +91,7 @@ static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
 		.name		= "pclk",
 		.divisor	= 1,
 		.min_baud	= 0,
-		.max_baud	= 0.
+		.max_baud	= 0,
 	}
 };

@ -103,7 +103,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = osiris_serial_clocks,
-		.clocks_size = ARRAY_SIZE(osiris_serial_clocks)
+		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
 	},
 	[1] = {
 		.hwport	     = 1,
@ -112,7 +112,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = osiris_serial_clocks,
-		.clocks_size = ARRAY_SIZE(osiris_serial_clocks)
+		.clocks_size = ARRAY_SIZE(osiris_serial_clocks),
 	},
 };

@ -126,7 +126,7 @@ static struct mtd_partition osiris_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
-		.offset	= 0
+		.offset	= 0,
 	},
 	[1] = {
 		.name	= "/boot",
@ -158,21 +158,21 @@ static struct s3c2410_nand_set osiris_nand_sets[] = {
 		.nr_chips	= 1,
 		.nr_map		= external_map,
 		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part
+		.partitions	= osiris_default_nand_part,
 	},
 	[0] = {
 		.name		= "chip0",
 		.nr_chips	= 1,
 		.nr_map		= chip0_map,
 		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part
+		.partitions	= osiris_default_nand_part,
 	},
 	[2] = {
 		.name		= "chip1",
 		.nr_chips	= 1,
 		.nr_map		= chip1_map,
 		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part
+		.partitions	= osiris_default_nand_part,
 	},
 };

@ -245,7 +245,7 @@ static struct s3c24xx_board osiris_board __initdata = {
 	.devices       = osiris_devices,
 	.devices_count = ARRAY_SIZE(osiris_devices),
 	.clocks	       = osiris_clocks,
-	.clocks_count  = ARRAY_SIZE(osiris_clocks)
+	.clocks_count  = ARRAY_SIZE(osiris_clocks),
 };

 static void __init osiris_map_io(void)
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@ -363,7 +363,9 @@ EXPORT_SYMBOL(__ioremap);

 void __iounmap(void __iomem *addr)
 {
+#ifndef CONFIG_SMP
 	struct vm_struct **p, *tmp;
+#endif
 	unsigned int section_mapping = 0;

 	addr = (void __iomem *)(PAGE_MASK & (unsigned long)addr);
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@ -13,6 +13,7 @@
 #include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
 #include <asm/tlbflush.h>
+#include <asm/page.h>

 #ifndef MULTI_CPU
 EXPORT_SYMBOL(cpu_dcache_clean_area);
@ -30,6 +31,13 @@ EXPORT_SYMBOL(__cpuc_coherent_kern_range);
 EXPORT_SYMBOL(cpu_cache);
 #endif

+#ifndef MULTI_USER
+EXPORT_SYMBOL(__cpu_clear_user_page);
+EXPORT_SYMBOL(__cpu_copy_user_page);
+#else
+EXPORT_SYMBOL(cpu_user);
+#endif
+
 /*
 * No module should need to touch the TLB (and currently
 * no modules do.  We export this for "loadkernel" support
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@ -536,6 +536,11 @@ cpu_80200_name:
 	.asciz	"XScale-80200"
 	.size	cpu_80200_name, . - cpu_80200_name

+	.type	cpu_80219_name, #object
+cpu_80219_name:
+	.asciz	"XScale-80219"
+	.size	cpu_80219_name, . - cpu_80219_name
+
 	.type	cpu_8032x_name, #object
 cpu_8032x_name:
 	.asciz	"XScale-IOP8032x Family"
@ -613,10 +618,33 @@ __80200_proc_info:
 	.long	xscale_cache_fns
 	.size	__80200_proc_info, . - __80200_proc_info

+	.type	__80219_proc_info,#object
+__80219_proc_info:
+	.long	0x69052e20
+	.long	0xffffffe0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__xscale_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_80219_name
+	.long	xscale_processor_functions
+	.long	v4wbi_tlb_fns
+	.long	xscale_mc_user_fns
+	.long	xscale_cache_fns
+	.size	__80219_proc_info, . - __80219_proc_info
+
 	.type	__8032x_proc_info,#object
 __8032x_proc_info:
 	.long	0x69052420
-	.long	0xfffff5e0      @ mask should accomodate IOP80219 also
+	.long	0xffffffe0
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_BUFFERABLE | \
 		PMD_SECT_CACHEABLE | \
--- a/include/asm-arm/arch-iop3xx/iop331-irqs.h
+++ b/include/asm-arm/arch-iop3xx/iop331-irqs.h
@ -91,7 +91,6 @@
 #define NR_IRQS			NR_IOP331_IRQS


-#if defined(CONFIG_ARCH_IQ80331)
 /*
 * Interrupts available on the IQ80331 board
 */
@ -111,7 +110,6 @@
 #define	IRQ_IQ80331_INTC	IRQ_IOP331_XINT2
 #define	IRQ_IQ80331_INTD	IRQ_IOP331_XINT3

-#elif defined(CONFIG_MACH_IQ80332)
 /*
 * Interrupts available on the IQ80332 board
 */
@ -131,6 +129,4 @@
 #define	IRQ_IQ80332_INTC	IRQ_IOP331_XINT2
 #define	IRQ_IQ80332_INTD	IRQ_IOP331_XINT3

-#endif
-
 #endif // _IOP331_IRQ_H_