From e6ed1b4ad30331e6d878579dd95764d0a224cacd Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 12 Dec 2016 19:05:31 +0800 Subject: [PATCH 001/645] thermal: rockchip: improve conversion error messages These error messages don't give much information about what went wrong. It would be nice, for one, to see what invalid temperature was being requested when conversion fails. It's also good to return an error when we can't handle a conversion properly. While we're at it, fix the grammar too. Signed-off-by: Brian Norris Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index b811b0fb61b1..3bbc97c67051 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -424,7 +424,8 @@ static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table, } exit: - pr_err("Invalid the conversion, error=%d\n", error); + pr_err("%s: invalid temperature, temp=%d error=%d\n", + __func__, temp, error); return error; } @@ -475,7 +476,8 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, } break; default: - pr_err("Invalid the conversion table\n"); + pr_err("%s: unknown table mode: %d\n", __func__, table.mode); + return -EINVAL; } /* From cdd8b3f7b779e39bda1a8057f287da065216720b Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 12 Dec 2016 19:05:32 +0800 Subject: [PATCH 002/645] thermal: rockchip: don't pass table structs by value This driver passes struct chip_tsadc_table by value throughout; this is inefficient, and AFAICT, there is no reason for it. Let's pass pointers instead. Signed-off-by: Brian Norris Reviewed-by: Caesar Wang Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 80 +++++++++++++++--------------- 1 file changed, 40 insertions(+), 40 deletions(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 3bbc97c67051..415e0ced3dce 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -118,11 +118,11 @@ struct rockchip_tsadc_chip { void (*control)(void __iomem *reg, bool on); /* Per-sensor methods */ - int (*get_temp)(struct chip_tsadc_table table, + int (*get_temp)(const struct chip_tsadc_table *table, int chn, void __iomem *reg, int *temp); - void (*set_alarm_temp)(struct chip_tsadc_table table, + void (*set_alarm_temp)(const struct chip_tsadc_table *table, int chn, void __iomem *reg, int temp); - void (*set_tshut_temp)(struct chip_tsadc_table table, + void (*set_tshut_temp)(const struct chip_tsadc_table *table, int chn, void __iomem *reg, int temp); void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m); @@ -397,26 +397,26 @@ static const struct tsadc_table rk3399_code_table[] = { {TSADCV3_DATA_MASK, 125000}, }; -static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table, +static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table, int temp) { int high, low, mid; u32 error = 0; low = 0; - high = table.length - 1; + high = table->length - 1; mid = (high + low) / 2; /* Return mask code data when the temp is over table range */ - if (temp < table.id[low].temp || temp > table.id[high].temp) { - error = table.data_mask; + if (temp < table->id[low].temp || temp > table->id[high].temp) { + error = table->data_mask; goto exit; } while (low <= high) { - if (temp == table.id[mid].temp) - return table.id[mid].code; - else if (temp < table.id[mid].temp) + if (temp == table->id[mid].temp) + return table->id[mid].code; + else if (temp < table->id[mid].temp) high = mid - 1; else low = mid + 1; @@ -429,28 +429,28 @@ exit: return error; } -static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, - int *temp) +static int rk_tsadcv2_code_to_temp(const struct chip_tsadc_table *table, + u32 code, int *temp) { unsigned int low = 1; - unsigned int high = table.length - 1; + unsigned int high = table->length - 1; unsigned int mid = (low + high) / 2; unsigned int num; unsigned long denom; - WARN_ON(table.length < 2); + WARN_ON(table->length < 2); - switch (table.mode) { + switch (table->mode) { case ADC_DECREMENT: - code &= table.data_mask; - if (code < table.id[high].code) + code &= table->data_mask; + if (code < table->id[high].code) return -EAGAIN; /* Incorrect reading */ while (low <= high) { - if (code >= table.id[mid].code && - code < table.id[mid - 1].code) + if (code >= table->id[mid].code && + code < table->id[mid - 1].code) break; - else if (code < table.id[mid].code) + else if (code < table->id[mid].code) low = mid + 1; else high = mid - 1; @@ -459,15 +459,15 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, } break; case ADC_INCREMENT: - code &= table.data_mask; - if (code < table.id[low].code) + code &= table->data_mask; + if (code < table->id[low].code) return -EAGAIN; /* Incorrect reading */ while (low <= high) { - if (code <= table.id[mid].code && - code > table.id[mid - 1].code) + if (code <= table->id[mid].code && + code > table->id[mid - 1].code) break; - else if (code > table.id[mid].code) + else if (code > table->id[mid].code) low = mid + 1; else high = mid - 1; @@ -476,7 +476,7 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, } break; default: - pr_err("%s: unknown table mode: %d\n", __func__, table.mode); + pr_err("%s: unknown table mode: %d\n", __func__, table->mode); return -EINVAL; } @@ -486,10 +486,10 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code, * temperature between 2 table entries is linear and interpolate * to produce less granular result. */ - num = table.id[mid].temp - table.id[mid - 1].temp; - num *= abs(table.id[mid - 1].code - code); - denom = abs(table.id[mid - 1].code - table.id[mid].code); - *temp = table.id[mid - 1].temp + (num / denom); + num = table->id[mid].temp - table->id[mid - 1].temp; + num *= abs(table->id[mid - 1].code - code); + denom = abs(table->id[mid - 1].code - table->id[mid].code); + *temp = table->id[mid - 1].temp + (num / denom); return 0; } @@ -640,7 +640,7 @@ static void rk_tsadcv3_control(void __iomem *regs, bool enable) writel_relaxed(val, regs + TSADCV2_AUTO_CON); } -static int rk_tsadcv2_get_temp(struct chip_tsadc_table table, +static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table, int chn, void __iomem *regs, int *temp) { u32 val; @@ -650,17 +650,17 @@ static int rk_tsadcv2_get_temp(struct chip_tsadc_table table, return rk_tsadcv2_code_to_temp(table, val, temp); } -static void rk_tsadcv2_alarm_temp(struct chip_tsadc_table table, +static void rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table, int chn, void __iomem *regs, int temp) { u32 alarm_value, int_en; /* Make sure the value is valid */ alarm_value = rk_tsadcv2_temp_to_code(table, temp); - if (alarm_value == table.data_mask) + if (alarm_value == table->data_mask) return; - writel_relaxed(alarm_value & table.data_mask, + writel_relaxed(alarm_value & table->data_mask, regs + TSADCV2_COMP_INT(chn)); int_en = readl_relaxed(regs + TSADCV2_INT_EN); @@ -668,14 +668,14 @@ static void rk_tsadcv2_alarm_temp(struct chip_tsadc_table table, writel_relaxed(int_en, regs + TSADCV2_INT_EN); } -static void rk_tsadcv2_tshut_temp(struct chip_tsadc_table table, +static void rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table, int chn, void __iomem *regs, int temp) { u32 tshut_value, val; /* Make sure the value is valid */ tshut_value = rk_tsadcv2_temp_to_code(table, temp); - if (tshut_value == table.data_mask) + if (tshut_value == table->data_mask) return; writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn)); @@ -885,7 +885,7 @@ static int rockchip_thermal_set_trips(void *_sensor, int low, int high) dev_dbg(&thermal->pdev->dev, "%s: sensor %d: low: %d, high %d\n", __func__, sensor->id, low, high); - tsadc->set_alarm_temp(tsadc->table, + tsadc->set_alarm_temp(&tsadc->table, sensor->id, thermal->regs, high); return 0; @@ -898,7 +898,7 @@ static int rockchip_thermal_get_temp(void *_sensor, int *out_temp) const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip; int retval; - retval = tsadc->get_temp(tsadc->table, + retval = tsadc->get_temp(&tsadc->table, sensor->id, thermal->regs, out_temp); dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %d, retval: %d\n", sensor->id, *out_temp, retval); @@ -984,7 +984,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev, int error; tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode); - tsadc->set_tshut_temp(tsadc->table, id, thermal->regs, + tsadc->set_tshut_temp(&tsadc->table, id, thermal->regs, thermal->tshut_temp); sensor->thermal = thermal; @@ -1198,7 +1198,7 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev) thermal->chip->set_tshut_mode(id, thermal->regs, thermal->tshut_mode); - thermal->chip->set_tshut_temp(thermal->chip->table, + thermal->chip->set_tshut_temp(&thermal->chip->table, id, thermal->regs, thermal->tshut_temp); } From d3530497f5c33530c50acb435b7d54e0a82d8032 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 12 Dec 2016 19:05:33 +0800 Subject: [PATCH 003/645] thermal: rockchip: fixes invalid temperature case The temp_to_code function will return 0 when we set the temperature to a invalid value (e.g. 61C, 62C, 63C....), that's unpractical. This patch will prevent this case happening. That will return the max analog value to indicate the temperature is invalid or over table temperature range. Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 48 +++++++++++++++++------------- 1 file changed, 28 insertions(+), 20 deletions(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 415e0ced3dce..f027b86b993d 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -120,10 +120,10 @@ struct rockchip_tsadc_chip { /* Per-sensor methods */ int (*get_temp)(const struct chip_tsadc_table *table, int chn, void __iomem *reg, int *temp); - void (*set_alarm_temp)(const struct chip_tsadc_table *table, - int chn, void __iomem *reg, int temp); - void (*set_tshut_temp)(const struct chip_tsadc_table *table, - int chn, void __iomem *reg, int temp); + int (*set_alarm_temp)(const struct chip_tsadc_table *table, + int chn, void __iomem *reg, int temp); + int (*set_tshut_temp)(const struct chip_tsadc_table *table, + int chn, void __iomem *reg, int temp); void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m); /* Per-table methods */ @@ -401,17 +401,15 @@ static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table, int temp) { int high, low, mid; - u32 error = 0; + u32 error = table->data_mask; low = 0; high = table->length - 1; mid = (high + low) / 2; /* Return mask code data when the temp is over table range */ - if (temp < table->id[low].temp || temp > table->id[high].temp) { - error = table->data_mask; + if (temp < table->id[low].temp || temp > table->id[high].temp) goto exit; - } while (low <= high) { if (temp == table->id[mid].temp) @@ -650,15 +648,15 @@ static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table, return rk_tsadcv2_code_to_temp(table, val, temp); } -static void rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table, - int chn, void __iomem *regs, int temp) +static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table, + int chn, void __iomem *regs, int temp) { u32 alarm_value, int_en; /* Make sure the value is valid */ alarm_value = rk_tsadcv2_temp_to_code(table, temp); if (alarm_value == table->data_mask) - return; + return -ERANGE; writel_relaxed(alarm_value & table->data_mask, regs + TSADCV2_COMP_INT(chn)); @@ -666,23 +664,27 @@ static void rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table, int_en = readl_relaxed(regs + TSADCV2_INT_EN); int_en |= TSADCV2_INT_SRC_EN(chn); writel_relaxed(int_en, regs + TSADCV2_INT_EN); + + return 0; } -static void rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table, - int chn, void __iomem *regs, int temp) +static int rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table, + int chn, void __iomem *regs, int temp) { u32 tshut_value, val; /* Make sure the value is valid */ tshut_value = rk_tsadcv2_temp_to_code(table, temp); if (tshut_value == table->data_mask) - return; + return -ERANGE; writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn)); /* TSHUT will be valid */ val = readl_relaxed(regs + TSADCV2_AUTO_CON); writel_relaxed(val | TSADCV2_AUTO_SRC_EN(chn), regs + TSADCV2_AUTO_CON); + + return 0; } static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs, @@ -885,10 +887,8 @@ static int rockchip_thermal_set_trips(void *_sensor, int low, int high) dev_dbg(&thermal->pdev->dev, "%s: sensor %d: low: %d, high %d\n", __func__, sensor->id, low, high); - tsadc->set_alarm_temp(&tsadc->table, - sensor->id, thermal->regs, high); - - return 0; + return tsadc->set_alarm_temp(&tsadc->table, + sensor->id, thermal->regs, high); } static int rockchip_thermal_get_temp(void *_sensor, int *out_temp) @@ -984,8 +984,12 @@ rockchip_thermal_register_sensor(struct platform_device *pdev, int error; tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode); - tsadc->set_tshut_temp(&tsadc->table, id, thermal->regs, + + error = tsadc->set_tshut_temp(&tsadc->table, id, thermal->regs, thermal->tshut_temp); + if (error) + dev_err(&pdev->dev, "%s: invalid tshut=%d, error=%d\n", + __func__, thermal->tshut_temp, error); sensor->thermal = thermal; sensor->id = id; @@ -1198,9 +1202,13 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev) thermal->chip->set_tshut_mode(id, thermal->regs, thermal->tshut_mode); - thermal->chip->set_tshut_temp(&thermal->chip->table, + + error = thermal->chip->set_tshut_temp(&thermal->chip->table, id, thermal->regs, thermal->tshut_temp); + if (error) + dev_err(&pdev->dev, "%s: invalid tshut=%d, error=%d\n", + __func__, thermal->tshut_temp, error); } thermal->chip->control(thermal->regs, true); From cadf29dc2a8bcaae83e6e4c3229965de747c8601 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 12 Dec 2016 19:05:34 +0800 Subject: [PATCH 004/645] thermal: rockchip: optimize the conversion table In order to support the valid temperature can conver to analog value. The rockchip thermal driver has not supported the all valid temperature to convert the analog value. (e.g.: 61C, 62C, 63C....) For example: In some cases, we need adjust the trip point. $cd /sys/class/thermal/thermal_zone* $echo 68000 > trip_point_0_temp That will return the max analogic value indicates the invalid before posting this patch. So, this patch will optimize the conversion table to support the other cases. Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index f027b86b993d..cacc12b44ca1 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -317,6 +317,7 @@ static const struct tsadc_table rk3288_code_table[] = { {3452, 115000}, {3437, 120000}, {3421, 125000}, + {0, 125000}, }; static const struct tsadc_table rk3368_code_table[] = { @@ -401,10 +402,12 @@ static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table, int temp) { int high, low, mid; + unsigned long num; + unsigned int denom; u32 error = table->data_mask; low = 0; - high = table->length - 1; + high = (table->length - 1) - 1; /* ignore the last check for table */ mid = (high + low) / 2; /* Return mask code data when the temp is over table range */ @@ -421,6 +424,26 @@ static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table, mid = (low + high) / 2; } + /* + * The conversion code granularity provided by the table. Let's + * assume that the relationship between temperature and + * analog value between 2 table entries is linear and interpolate + * to produce less granular result. + */ + num = abs(table->id[mid + 1].code - table->id[mid].code); + num *= temp - table->id[mid].temp; + denom = table->id[mid + 1].temp - table->id[mid].temp; + + switch (table->mode) { + case ADC_DECREMENT: + return table->id[mid].code - (num / denom); + case ADC_INCREMENT: + return table->id[mid].code + (num / denom); + default: + pr_err("%s: unknown table mode: %d\n", __func__, table->mode); + return error; + } + exit: pr_err("%s: invalid temperature, temp=%d error=%d\n", __func__, temp, error); From 18591add41ec9558ce0e32ef88626c18cc70c686 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Mon, 12 Dec 2016 19:05:35 +0800 Subject: [PATCH 005/645] thermal: rockchip: handle set_trips without the trip points In some cases, some sensors didn't need the trip points, the set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm in the end, ignore this case and disable the high temperature interrupt. Signed-off-by: Caesar Wang Reviewed-by: Brian Norris Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index cacc12b44ca1..cbbf0ce2302c 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -674,7 +674,21 @@ static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table, static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table, int chn, void __iomem *regs, int temp) { - u32 alarm_value, int_en; + u32 alarm_value; + u32 int_en, int_clr; + + /* + * In some cases, some sensors didn't need the trip points, the + * set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm + * in the end, ignore this case and disable the high temperature + * interrupt. + */ + if (temp == INT_MAX) { + int_clr = readl_relaxed(regs + TSADCV2_INT_EN); + int_clr &= ~TSADCV2_INT_SRC_EN(chn); + writel_relaxed(int_clr, regs + TSADCV2_INT_EN); + return 0; + } /* Make sure the value is valid */ alarm_value = rk_tsadcv2_temp_to_code(table, temp); From dadab2d4e3cf708ceba22ecddd94aedfecb39199 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 14 Dec 2016 13:28:05 +0100 Subject: [PATCH 006/645] spi: SPI_FSL_DSPI should depend on HAS_DMA If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/spi/spi-fsl-dspi.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ec4aa252d6e8..2922a9908302 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -378,6 +378,7 @@ config SPI_FSL_SPI config SPI_FSL_DSPI tristate "Freescale DSPI controller" select REGMAP_MMIO + depends on HAS_DMA depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST help This enables support for the Freescale DSPI controller in master From 6fce983f9b3ef51d47e647b2cff15049ef803781 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Tue, 13 Dec 2016 11:03:49 +0000 Subject: [PATCH 007/645] ASoC: dwc: Fix PIO mode initialization We can no longer rely on the return value of devm_snd_dmaengine_pcm_register(...) to check if the DMA handle is declared in the DT. Previously this check activated PIO mode but currently dma_request_chan returns either a valid channel or -EPROBE_DEFER. In order to activate PIO mode check instead if the interrupt line is declared. This reflects better what is documented in the DT bindings (see Documentation/devicetree/bindings/sound/ designware-i2s.txt). Also, initialize use_pio variable which was never being set causing PIO mode to never work. Signed-off-by: Jose Abreu Signed-off-by: Mark Brown --- sound/soc/dwc/designware_i2s.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c index 2998954a1c74..bdf8398cbc81 100644 --- a/sound/soc/dwc/designware_i2s.c +++ b/sound/soc/dwc/designware_i2s.c @@ -681,22 +681,19 @@ static int dw_i2s_probe(struct platform_device *pdev) } if (!pdata) { - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); - if (ret == -EPROBE_DEFER) { - dev_err(&pdev->dev, - "failed to register PCM, deferring probe\n"); - return ret; - } else if (ret) { - dev_err(&pdev->dev, - "Could not register DMA PCM: %d\n" - "falling back to PIO mode\n", ret); + if (irq >= 0) { ret = dw_pcm_register(pdev); - if (ret) { - dev_err(&pdev->dev, - "Could not register PIO PCM: %d\n", + dev->use_pio = true; + } else { + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, + 0); + dev->use_pio = false; + } + + if (ret) { + dev_err(&pdev->dev, "could not register pcm: %d\n", ret); - goto err_clk_disable; - } + goto err_clk_disable; } } From 4286db8456f4fa0c6af2b6b9abc5991a7e7da69c Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 12 Dec 2016 10:49:35 +0100 Subject: [PATCH 008/645] spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and Gen 3. But beyond that it's not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Also: * Deprecate renesas,sh-msiof. It seems poorly named as it is only compatible with SH-Mobile. It also appears unused in mainline. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/sh-msiof.txt | 19 +++++++++++++------ drivers/spi/spi-sh-msiof.c | 4 +++- 2 files changed, 16 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index da6614c63796..dc975064fa27 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -1,17 +1,23 @@ Renesas MSIOF spi controller Required properties: -- compatible : "renesas,msiof-" for SoCs, - "renesas,sh-msiof" for SuperH, or - "renesas,sh-mobile-msiof" for SH Mobile series. - Examples with soctypes are: - "renesas,msiof-r8a7790" (R-Car H2) +- compatible : "renesas,msiof-r8a7790" (R-Car H2) "renesas,msiof-r8a7791" (R-Car M2-W) "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) + "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device) + "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device) + "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device) + "renesas,sh-msiof" (deprecated) + + When compatible with the generic version, nodes + must list the SoC-specific version corresponding + to the platform first followed by the generic + version. + - reg : A list of offsets and lengths of the register sets for the device. If only one register set is present, it is to be used @@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*. Example: msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 0012ad02e569..471ca211b76c 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -973,14 +973,16 @@ static const struct sh_msiof_chipdata r8a779x_data = { }; static const struct of_device_id sh_msiof_match[] = { - { .compatible = "renesas,sh-msiof", .data = &sh_data }, { .compatible = "renesas,sh-mobile-msiof", .data = &sh_data }, { .compatible = "renesas,msiof-r8a7790", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7791", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7792", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7793", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7794", .data = &r8a779x_data }, + { .compatible = "renesas,rcar-gen2-msiof", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7796", .data = &r8a779x_data }, + { .compatible = "renesas,rcar-gen3-msiof", .data = &r8a779x_data }, + { .compatible = "renesas,sh-msiof", .data = &sh_data }, // Deprecated {}, }; MODULE_DEVICE_TABLE(of, sh_msiof_match); From f6f0083cca66e673cca6fa26b52b107b5570081d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 13 Dec 2016 10:28:12 +0000 Subject: [PATCH 009/645] spi: armada-3700: fix unsigned compare than zero on irq spi->irq is an unsigned integer hence the check if status is less than zero has no effect. Fix this by replacing spi->irq with an int irq so the less than zero compare will correctly detect errors. Issue found with static analysis with CoverityScan, CID1388567 Signed-off-by: Colin Ian King Acked-by: Romain Perier Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index e89da0af45d2..4e921782652f 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -800,7 +800,7 @@ static int a3700_spi_probe(struct platform_device *pdev) struct spi_master *master; struct a3700_spi *spi; u32 num_cs = 0; - int ret = 0; + int irq, ret = 0; master = spi_alloc_master(dev, sizeof(*spi)); if (!master) { @@ -846,12 +846,13 @@ static int a3700_spi_probe(struct platform_device *pdev) goto error; } - spi->irq = platform_get_irq(pdev, 0); - if (spi->irq < 0) { - dev_err(dev, "could not get irq: %d\n", spi->irq); + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "could not get irq: %d\n", irq); ret = -ENXIO; goto error; } + spi->irq = irq; init_completion(&spi->done); From 8010d7feb2f0367ae573ad601b2905e29db50cd3 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 11 Dec 2016 20:09:23 +0100 Subject: [PATCH 010/645] netfilter: nft_quota: reset quota after dump Dumping of netlink attributes may fail due to insufficient room in the skbuff, so let's reset consumed quota if we succeed to put netlink attributes into the skbuff. Fixes: 43da04a593d8 ("netfilter: nf_tables: atomic dump and reset for stateful objects") Reported-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_quota.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/net/netfilter/nft_quota.c b/net/netfilter/nft_quota.c index bd6efc53f26d..2d6fe3559912 100644 --- a/net/netfilter/nft_quota.c +++ b/net/netfilter/nft_quota.c @@ -110,30 +110,32 @@ static int nft_quota_obj_init(const struct nlattr * const tb[], static int nft_quota_do_dump(struct sk_buff *skb, struct nft_quota *priv, bool reset) { + u64 consumed, consumed_cap; u32 flags = priv->flags; - u64 consumed; - - if (reset) { - consumed = atomic64_xchg(&priv->consumed, 0); - if (test_and_clear_bit(NFT_QUOTA_DEPLETED_BIT, &priv->flags)) - flags |= NFT_QUOTA_F_DEPLETED; - } else { - consumed = atomic64_read(&priv->consumed); - } /* Since we inconditionally increment consumed quota for each packet * that we see, don't go over the quota boundary in what we send to * userspace. */ - if (consumed > priv->quota) - consumed = priv->quota; + consumed = atomic64_read(&priv->consumed); + if (consumed >= priv->quota) { + consumed_cap = priv->quota; + flags |= NFT_QUOTA_F_DEPLETED; + } else { + consumed_cap = consumed; + } if (nla_put_be64(skb, NFTA_QUOTA_BYTES, cpu_to_be64(priv->quota), NFTA_QUOTA_PAD) || - nla_put_be64(skb, NFTA_QUOTA_CONSUMED, cpu_to_be64(consumed), + nla_put_be64(skb, NFTA_QUOTA_CONSUMED, cpu_to_be64(consumed_cap), NFTA_QUOTA_PAD) || nla_put_be32(skb, NFTA_QUOTA_FLAGS, htonl(flags))) goto nla_put_failure; + + if (reset) { + atomic64_sub(consumed, &priv->consumed); + clear_bit(NFT_QUOTA_DEPLETED_BIT, &priv->flags); + } return 0; nla_put_failure: From c2e756ff9e699865d294cdc112acfc36419cf5cc Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 11 Dec 2016 20:46:51 +0100 Subject: [PATCH 011/645] netfilter: nft_queue: use raw_smp_processor_id() Using smp_processor_id() causes splats with PREEMPT_RCU: [19379.552780] BUG: using smp_processor_id() in preemptible [00000000] code: ping/32389 [19379.552793] caller is debug_smp_processor_id+0x17/0x19 [...] [19379.552823] Call Trace: [19379.552832] [] dump_stack+0x67/0x90 [19379.552837] [] check_preemption_disabled+0xe5/0xf5 [19379.552842] [] debug_smp_processor_id+0x17/0x19 [19379.552849] [] nft_queue_eval+0x35/0x20c [nft_queue] No need to disable preemption since we only fetch the numeric value, so let's use raw_smp_processor_id() instead. Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_queue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nft_queue.c b/net/netfilter/nft_queue.c index 3e19fa1230dc..dbb6aaff67ec 100644 --- a/net/netfilter/nft_queue.c +++ b/net/netfilter/nft_queue.c @@ -38,7 +38,7 @@ static void nft_queue_eval(const struct nft_expr *expr, if (priv->queues_total > 1) { if (priv->flags & NFT_QUEUE_FLAG_CPU_FANOUT) { - int cpu = smp_processor_id(); + int cpu = raw_smp_processor_id(); queue = priv->queuenum + cpu % priv->queues_total; } else { From 3e38df136e453aa69eb4472108ebce2fb00b1ba6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 13 Dec 2016 13:59:33 +0100 Subject: [PATCH 012/645] netfilter: nf_tables: fix oob access BUG: KASAN: slab-out-of-bounds in nf_tables_rule_destroy+0xf1/0x130 at addr ffff88006a4c35c8 Read of size 8 by task nft/1607 When we've destroyed last valid expr, nft_expr_next() returns an invalid expr. We must not dereference it unless it passes != nft_expr_last() check. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index a019a87e58ee..0db5f9782265 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2115,7 +2115,7 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx, * is called on error from nf_tables_newrule(). */ expr = nft_expr_first(rule); - while (expr->ops && expr != nft_expr_last(rule)) { + while (expr != nft_expr_last(rule) && expr->ops) { nf_tables_expr_destroy(ctx, expr); expr = nft_expr_next(expr); } From 053d20f5712529016eae10356e0dea9b360325bd Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 14 Dec 2016 12:15:49 +0100 Subject: [PATCH 013/645] netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set If the NFT_PAYLOAD_L4CSUM_PSEUDOHDR flag is set, then mangle layer 4 checksum. This should not depend on csum_type NFT_PAYLOAD_CSUM_INET since IPv6 header has no checksum field, but still an update of any of the pseudoheader fields may trigger a layer 4 checksum update. Fixes: 1814096980bb ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields") Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_payload.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c index 36d2b1096546..7d699bbd45b0 100644 --- a/net/netfilter/nft_payload.c +++ b/net/netfilter/nft_payload.c @@ -250,6 +250,22 @@ static int nft_payload_l4csum_update(const struct nft_pktinfo *pkt, return 0; } +static int nft_payload_csum_inet(struct sk_buff *skb, const u32 *src, + __wsum fsum, __wsum tsum, int csum_offset) +{ + __sum16 sum; + + if (skb_copy_bits(skb, csum_offset, &sum, sizeof(sum)) < 0) + return -1; + + nft_csum_replace(&sum, fsum, tsum); + if (!skb_make_writable(skb, csum_offset + sizeof(sum)) || + skb_store_bits(skb, csum_offset, &sum, sizeof(sum)) < 0) + return -1; + + return 0; +} + static void nft_payload_set_eval(const struct nft_expr *expr, struct nft_regs *regs, const struct nft_pktinfo *pkt) @@ -259,7 +275,6 @@ static void nft_payload_set_eval(const struct nft_expr *expr, const u32 *src = ®s->data[priv->sreg]; int offset, csum_offset; __wsum fsum, tsum; - __sum16 sum; switch (priv->base) { case NFT_PAYLOAD_LL_HEADER: @@ -282,18 +297,14 @@ static void nft_payload_set_eval(const struct nft_expr *expr, csum_offset = offset + priv->csum_offset; offset += priv->offset; - if (priv->csum_type == NFT_PAYLOAD_CSUM_INET && + if ((priv->csum_type == NFT_PAYLOAD_CSUM_INET || priv->csum_flags) && (priv->base != NFT_PAYLOAD_TRANSPORT_HEADER || skb->ip_summed != CHECKSUM_PARTIAL)) { - if (skb_copy_bits(skb, csum_offset, &sum, sizeof(sum)) < 0) - goto err; - fsum = skb_checksum(skb, offset, priv->len, 0); tsum = csum_partial(src, priv->len, 0); - nft_csum_replace(&sum, fsum, tsum); - if (!skb_make_writable(skb, csum_offset + sizeof(sum)) || - skb_store_bits(skb, csum_offset, &sum, sizeof(sum)) < 0) + if (priv->csum_type == NFT_PAYLOAD_CSUM_INET && + nft_payload_csum_inet(skb, src, fsum, tsum, csum_offset)) goto err; if (priv->csum_flags && From 0ea617a298dcdc2251b4e10f83ac3f3e627b66e3 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 8 Dec 2016 13:05:43 +0000 Subject: [PATCH 014/645] ASoC: rsnd: don't double free kctrl On an error, snd_ctl_add already free's kctrl, so calling snd_ctl_free_one to free it again leads to a double free error. Fix this by removing the extraneous snd_ctl_free_one call. Issue found using static analysis with CoverityScan, CID 1372908 Signed-off-by: Colin Ian King Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index 4bd68de76130..99b5b0835c1e 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -1030,10 +1030,8 @@ static int __rsnd_kctrl_new(struct rsnd_mod *mod, return -ENOMEM; ret = snd_ctl_add(card, kctrl); - if (ret < 0) { - snd_ctl_free_one(kctrl); + if (ret < 0) return ret; - } cfg->update = update; cfg->card = card; From c2b36129ce53a22b89dd2b88db33e7ffdefe0f41 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 9 Dec 2016 14:17:47 +0000 Subject: [PATCH 015/645] ASoC: topology: kfree kcontrol->private_value before freeing kcontrol kcontrol->private_value is being kfree'd after kcontrol has been freed (in previous call to snd_ctl_remove). Instead, fix this by kfreeing the private_value before kcontrol. CoverityScan CID#1388311 "Read from pointer after free" Fixes: eea3dd4f1247a ("ASoC: topology: Only free TLV for volume mixers of a widget") Signed-off-by: Colin Ian King Signed-off-by: Mark Brown --- sound/soc/soc-topology.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 65670b2b408c..fbfb1fab88d5 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -514,13 +514,12 @@ static void remove_widget(struct snd_soc_component *comp, == SND_SOC_TPLG_TYPE_MIXER) kfree(kcontrol->tlv.p); - snd_ctl_remove(card, kcontrol); - /* Private value is used as struct soc_mixer_control * for volume mixers or soc_bytes_ext for bytes * controls. */ kfree((void *)kcontrol->private_value); + snd_ctl_remove(card, kcontrol); } kfree(w->kcontrol_news); } From 9e4d59ada4d602e78eee9fb5f898ce61fdddb446 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Fri, 16 Dec 2016 18:26:54 +0900 Subject: [PATCH 016/645] ASoC: hdmi-codec: use unsigned type to structure members with bit-field This is a fix for Linux 4.10-rc1. In C language specification, a bit-field is interpreted as a signed or unsigned integer type consisting of the specified number of bits. In GCC manual, the range of a signed bit field of N bits is from -(2^N) / 2 to ((2^N) / 2) - 1 https://www.gnu.org/software/gnu-c-manual/gnu-c-manual.html#Bit-Fields Therefore, when defined as 1 bit-field with signed type, variables can represents -1 and 0. The snd-soc-hdmi-codec module includes a structure which has signed type members with bit-fields. Codes of this module assign 0 and 1 to the members. This seems to result in implementation-dependent behaviours. As of v4.10-rc1 merge window, outside of sound subsystem, this structure is referred by below GPU modules. - tda998x - sti-drm - mediatek-drm-hdmi - msm As long as I review their codes relevant to the structure, the structure members are used just for condition statements and printk formats. My proposal of change is a bit intrusive to the printk formats but this may be acceptable. Totally, it's reasonable to use unsigned type for the structure members. This bug is detected by Sparse, static code analyzer with below warnings. ./include/sound/hdmi-codec.h:39:26: error: dubious one-bit signed bitfield ./include/sound/hdmi-codec.h:40:28: error: dubious one-bit signed bitfield ./include/sound/hdmi-codec.h:41:29: error: dubious one-bit signed bitfield ./include/sound/hdmi-codec.h:42:31: error: dubious one-bit signed bitfield Fixes: 09184118a8ab ("ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders") Signed-off-by: Takashi Sakamoto Acked-by: Arnaud Pouliquen Signed-off-by: Mark Brown CC: stable@vger.kernel.org --- include/sound/hdmi-codec.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h index 530c57bdefa0..915c4357945c 100644 --- a/include/sound/hdmi-codec.h +++ b/include/sound/hdmi-codec.h @@ -36,10 +36,10 @@ struct hdmi_codec_daifmt { HDMI_AC97, HDMI_SPDIF, } fmt; - int bit_clk_inv:1; - int frame_clk_inv:1; - int bit_clk_master:1; - int frame_clk_master:1; + unsigned int bit_clk_inv:1; + unsigned int frame_clk_inv:1; + unsigned int bit_clk_master:1; + unsigned int frame_clk_master:1; }; /* From 42cd4ed888393b2bc8ddfd277aa2d0ec0c7e0259 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 16 Dec 2016 12:33:25 +0300 Subject: [PATCH 017/645] spi: armada-3700: Set mode bits correctly We set SPI_RX_DUAL twice instead of setting SPI_TX_DUAL. Fixes: 5762ab71eb24 ("spi: Add support for Armada 3700 SPI Controller") Signed-off-by: Dan Carpenter Acked-by: Romain Perier Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 4e921782652f..0314c6b9e044 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -825,7 +825,7 @@ static int a3700_spi_probe(struct platform_device *pdev) master->unprepare_message = a3700_spi_unprepare_message; master->set_cs = a3700_spi_set_cs; master->flags = SPI_MASTER_HALF_DUPLEX; - master->mode_bits |= (SPI_RX_DUAL | SPI_RX_DUAL | + master->mode_bits |= (SPI_RX_DUAL | SPI_TX_DUAL | SPI_RX_QUAD | SPI_TX_QUAD); platform_set_drvdata(pdev, master); From 65dadffddbe44a60f8be9e95f264949ba1e547e9 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 16 Dec 2016 14:43:39 -0800 Subject: [PATCH 018/645] Input: joydev - remove unused linux/miscdevice.h include This patch remove the inclusion of linux/miscdevice.h for joydev since it does not use miscdevice. Signed-off-by: Corentin Labbe Signed-off-by: Dmitry Torokhov --- drivers/input/joydev.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index f3135ae22df4..abd18f31b24f 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include From 41c567a5d7d1a986763e58c3394782813c3bcb03 Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Sun, 18 Dec 2016 15:26:12 -0800 Subject: [PATCH 019/645] Input: i8042 - add Pegatron touchpad to noloop table Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able to recognize a Synaptics touchpad in the AUX port. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=93791 (Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B)) Suggested-by: Dmitry Torokhov Signed-off-by: Marcos Paulo de Souza Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 73a4e68448fc..381d802fe853 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -211,6 +211,12 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "Rev 1"), }, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PEGATRON CORPORATION"), + DMI_MATCH(DMI_PRODUCT_NAME, "C15B"), + }, + }, { } }; From 67626c9323027534496d21cf32793121662d03c0 Mon Sep 17 00:00:00 2001 From: Aniroop Mathur Date: Sun, 18 Dec 2016 15:27:16 -0800 Subject: [PATCH 020/645] Input: synaptics_i2c - change msleep to usleep_range for small msecs msleep(1~20) may not do what the caller intends, and will often sleep longer. (~20 ms actual sleep for any value given in the 1~20ms range) This is not the desired behaviour for many cases like device resume time, device suspend time, device enable time, retry logic, etc. Thus, change msleep to usleep_range for precise wakeups. Signed-off-by: Aniroop Mathur Acked-by: Igor Grinberg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics_i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index aa7c5da60800..cb2bf203f4ca 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -29,7 +29,7 @@ * after soft reset, we should wait for 1 ms * before the device becomes operational */ -#define SOFT_RESET_DELAY_MS 3 +#define SOFT_RESET_DELAY_US 3000 /* and after hard reset, we should wait for max 500ms */ #define HARD_RESET_DELAY_MS 500 @@ -311,7 +311,7 @@ static int synaptics_i2c_reset_config(struct i2c_client *client) if (ret) { dev_err(&client->dev, "Unable to reset device\n"); } else { - msleep(SOFT_RESET_DELAY_MS); + usleep_range(SOFT_RESET_DELAY_US, SOFT_RESET_DELAY_US + 100); ret = synaptics_i2c_config(client); if (ret) dev_err(&client->dev, "Unable to config device\n"); From 4a8b3a682be9addff7dbd16371fa8c34103b5c31 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Fri, 16 Dec 2016 10:55:49 -0600 Subject: [PATCH 021/645] ASoC: Intel: bytcr_rt5640: fallback mechanism if MCLK is not enabled Commit df1a2776a795 ("ASoC: Intel: bytcr_rt5640: add MCLK support") was merged but the corresponding clock framework patches have not, after being bumped from audio to clock to x86 domains. The missing clock-related patches result in a regression starting with 4.9 with the audio card not being created. Rather than reverting this commit and all following updates already queued up for 4.10, handle run-time dependency on MCLK and fall back to the previous bit-clock mode. This provides the same functionality as in 4.8 for Baytrail devices. On Baytrail-CR most devices remain silent with this fallback but additional patches are needed anyway. As suggested by Mark Brown, the fallback is only allowed with -ENOENT, all other run-time errors, including -EPROBE_DEFER, will stop the probe with no sound card registered. This patch should be applied to -stable as well as ASoC 4.10 fixes Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 507a86a5eafe..e33e4777a65c 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -825,10 +825,20 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && (is_valleyview())) { priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); if (IS_ERR(priv->mclk)) { + ret_val = PTR_ERR(priv->mclk); + dev_err(&pdev->dev, - "Failed to get MCLK from pmc_plt_clk_3: %ld\n", - PTR_ERR(priv->mclk)); - return PTR_ERR(priv->mclk); + "Failed to get MCLK from pmc_plt_clk_3: %d\n", + ret_val); + + /* + * Fall back to bit clock usage for -ENOENT (clock not + * available likely due to missing dependencies), bail + * for all other errors, including -EPROBE_DEFER + */ + if (ret_val != -ENOENT) + return ret_val; + byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN; } } From 73ba39ab9307340dc98ec3622891314bbc09cc2e Mon Sep 17 00:00:00 2001 From: Pan Bian Date: Sun, 4 Dec 2016 12:51:53 +0800 Subject: [PATCH 022/645] btrfs: return the actual error value from from btrfs_uuid_tree_iterate In function btrfs_uuid_tree_iterate(), errno is assigned to variable ret on errors. However, it directly returns 0. It may be better to return ret. This patch also removes the warning, because the caller already prints a warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188731 Signed-off-by: Pan Bian Reviewed-by: Omar Sandoval [ edited subject ] Signed-off-by: David Sterba --- fs/btrfs/uuid-tree.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/btrfs/uuid-tree.c b/fs/btrfs/uuid-tree.c index 161342b73ce5..726f928238d0 100644 --- a/fs/btrfs/uuid-tree.c +++ b/fs/btrfs/uuid-tree.c @@ -352,7 +352,5 @@ skip: out: btrfs_free_path(path); - if (ret) - btrfs_warn(fs_info, "btrfs_uuid_tree_iterate failed %d", ret); - return 0; + return ret; } From 1cab2a84f470e15ecc8e5143bfe9398c6e888032 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Tue, 20 Dec 2016 10:29:12 +0000 Subject: [PATCH 023/645] ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data Protect against corrupt firmware files by ensuring that the length we get for the data in a region actually lies within the available firmware file data buffer. Signed-off-by: Richard Fitzgerald Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 593b7d1aed46..d72ccef9e238 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1551,7 +1551,7 @@ static int wm_adsp_load(struct wm_adsp *dsp) const struct wmfw_region *region; const struct wm_adsp_region *mem; const char *region_name; - char *file, *text; + char *file, *text = NULL; struct wm_adsp_buf *buf; unsigned int reg; int regions = 0; @@ -1700,10 +1700,21 @@ static int wm_adsp_load(struct wm_adsp *dsp) regions, le32_to_cpu(region->len), offset, region_name); + if ((pos + le32_to_cpu(region->len) + sizeof(*region)) > + firmware->size) { + adsp_err(dsp, + "%s.%d: %s region len %d bytes exceeds file length %zu\n", + file, regions, region_name, + le32_to_cpu(region->len), firmware->size); + ret = -EINVAL; + goto out_fw; + } + if (text) { memcpy(text, region->data, le32_to_cpu(region->len)); adsp_info(dsp, "%s: %s\n", file, text); kfree(text); + text = NULL; } if (reg) { @@ -1748,6 +1759,7 @@ out_fw: regmap_async_complete(regmap); wm_adsp_buf_free(&buf_list); release_firmware(firmware); + kfree(text); out: kfree(file); @@ -2233,6 +2245,17 @@ static int wm_adsp_load_coeff(struct wm_adsp *dsp) } if (reg) { + if ((pos + le32_to_cpu(blk->len) + sizeof(*blk)) > + firmware->size) { + adsp_err(dsp, + "%s.%d: %s region len %d bytes exceeds file length %zu\n", + file, blocks, region_name, + le32_to_cpu(blk->len), + firmware->size); + ret = -EINVAL; + goto out_fw; + } + buf = wm_adsp_buf_alloc(blk->data, le32_to_cpu(blk->len), &buf_list); From 264c3e8de4fbda1d1342213c78fb3788a43cfd41 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 20 Dec 2016 11:21:16 +0100 Subject: [PATCH 024/645] spi: sh-msiof: Do not use C++ style comment 4286db8456f4 ("spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings") added a C++ style comment. This is not in keeping with the style used for comments elsewhere in this fine. Update it accordingly. Signed-off-by: Simon Horman Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 471ca211b76c..1f00eeb0b5a3 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -982,7 +982,7 @@ static const struct of_device_id sh_msiof_match[] = { { .compatible = "renesas,rcar-gen2-msiof", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7796", .data = &r8a779x_data }, { .compatible = "renesas,rcar-gen3-msiof", .data = &r8a779x_data }, - { .compatible = "renesas,sh-msiof", .data = &sh_data }, // Deprecated + { .compatible = "renesas,sh-msiof", .data = &sh_data }, /* Deprecated */ {}, }; MODULE_DEVICE_TABLE(of, sh_msiof_match); From 7dbbf0fa1bf14c17900bb8057986b06db3822239 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 22 Nov 2016 16:17:50 -0800 Subject: [PATCH 025/645] scsi: scsi-mq: Wait for .queue_rq() if necessary Ensure that if scsi-mq is enabled that scsi_internal_device_block() waits until ongoing shost->hostt->queuecommand() calls have finished. Signed-off-by: Bart Van Assche Reviewed-by: Sagi Grimberg Reviewed-by: Martin K. Petersen Cc: James Bottomley Cc: Christoph Hellwig Cc: Doug Ledford Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index c35b6de4ca64..9fd9a977c695 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -2893,7 +2893,7 @@ scsi_internal_device_block(struct scsi_device *sdev) * request queue. */ if (q->mq_ops) { - blk_mq_stop_hw_queues(q); + blk_mq_quiesce_queue(q); } else { spin_lock_irqsave(q->queue_lock, flags); blk_stop_queue(q); From 7961d53d22375bb9e8ae8063533b9059102ed39d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 20 Dec 2016 08:43:30 -0800 Subject: [PATCH 026/645] scsi: qedi: fix build, depends on UIO Fix build of SCSI qedi driver. It uses uio interfaces so it should depend on UIO. ERROR: "uio_unregister_device" [drivers/scsi/qedi/qedi.ko] undefined! ERROR: "uio_event_notify" [drivers/scsi/qedi/qedi.ko] undefined! ERROR: "__uio_register_device" [drivers/scsi/qedi/qedi.ko] undefined! Signed-off-by: Randy Dunlap Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qedi/Kconfig b/drivers/scsi/qedi/Kconfig index 23ca8a274586..21331453db7b 100644 --- a/drivers/scsi/qedi/Kconfig +++ b/drivers/scsi/qedi/Kconfig @@ -1,6 +1,6 @@ config QEDI tristate "QLogic QEDI 25/40/100Gb iSCSI Initiator Driver Support" - depends on PCI && SCSI + depends on PCI && SCSI && UIO depends on QED select SCSI_ISCSI_ATTRS select QED_LL2 From 6c5d5cfbe3c59429e6d6f66477a7609aacf69751 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 20 Dec 2016 19:14:34 +0800 Subject: [PATCH 027/645] netfilter: ipt_CLUSTERIP: check duplicate config when initializing Now when adding an ipt_CLUSTERIP rule, it only checks duplicate config in clusterip_config_find_get(). But after that, there may be still another thread to insert a config with the same ip, then it leaves proc_create_data to do duplicate check. It's more reasonable to check duplicate config by ipt_CLUSTERIP itself, instead of checking it by proc fs duplicate file check. Before, when proc fs allowed duplicate name files in a directory, It could even crash kernel because of use-after-free. This patch is to check duplicate config under the protection of clusterip net lock when initializing a new config and correct the return err. Note that it also moves proc file node creation after adding new config, as proc_create_data may sleep, it couldn't be called under the clusterip_net lock. clusterip_config_find_get returns NULL if c->pde is null to make sure it can't be used until the proc file node creation is done. Suggested-by: Marcelo Ricardo Leitner Signed-off-by: Xin Long Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/ipt_CLUSTERIP.c | 34 ++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c index 21db00d0362b..a6b8c1a4102b 100644 --- a/net/ipv4/netfilter/ipt_CLUSTERIP.c +++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c @@ -144,7 +144,7 @@ clusterip_config_find_get(struct net *net, __be32 clusterip, int entry) rcu_read_lock_bh(); c = __clusterip_config_find(net, clusterip); if (c) { - if (unlikely(!atomic_inc_not_zero(&c->refcount))) + if (!c->pde || unlikely(!atomic_inc_not_zero(&c->refcount))) c = NULL; else if (entry) atomic_inc(&c->entries); @@ -166,14 +166,15 @@ clusterip_config_init_nodelist(struct clusterip_config *c, static struct clusterip_config * clusterip_config_init(const struct ipt_clusterip_tgt_info *i, __be32 ip, - struct net_device *dev) + struct net_device *dev) { + struct net *net = dev_net(dev); struct clusterip_config *c; - struct clusterip_net *cn = net_generic(dev_net(dev), clusterip_net_id); + struct clusterip_net *cn = net_generic(net, clusterip_net_id); c = kzalloc(sizeof(*c), GFP_ATOMIC); if (!c) - return NULL; + return ERR_PTR(-ENOMEM); c->dev = dev; c->clusterip = ip; @@ -185,6 +186,17 @@ clusterip_config_init(const struct ipt_clusterip_tgt_info *i, __be32 ip, atomic_set(&c->refcount, 1); atomic_set(&c->entries, 1); + spin_lock_bh(&cn->lock); + if (__clusterip_config_find(net, ip)) { + spin_unlock_bh(&cn->lock); + kfree(c); + + return ERR_PTR(-EBUSY); + } + + list_add_rcu(&c->list, &cn->configs); + spin_unlock_bh(&cn->lock); + #ifdef CONFIG_PROC_FS { char buffer[16]; @@ -195,16 +207,16 @@ clusterip_config_init(const struct ipt_clusterip_tgt_info *i, __be32 ip, cn->procdir, &clusterip_proc_fops, c); if (!c->pde) { + spin_lock_bh(&cn->lock); + list_del_rcu(&c->list); + spin_unlock_bh(&cn->lock); kfree(c); - return NULL; + + return ERR_PTR(-ENOMEM); } } #endif - spin_lock_bh(&cn->lock); - list_add_rcu(&c->list, &cn->configs); - spin_unlock_bh(&cn->lock); - return c; } @@ -410,9 +422,9 @@ static int clusterip_tg_check(const struct xt_tgchk_param *par) config = clusterip_config_init(cipinfo, e->ip.dst.s_addr, dev); - if (!config) { + if (IS_ERR(config)) { dev_put(dev); - return -ENOMEM; + return PTR_ERR(config); } dev_mc_add(config->dev, config->clustermac); } From 7e164ce4e8ecd7e9a58a83750bd3ee03125df154 Mon Sep 17 00:00:00 2001 From: Sedat Dilek Date: Mon, 26 Dec 2016 11:05:11 +0100 Subject: [PATCH 028/645] perf/x86/amd/ibs: Fix typo after cleanup state names in cpu/hotplug Fix a small typo after cleanup state names in cpu/hotplug. The new convention is 'subsys/xxx/yyy:state' where "state" here is called "starting" not "STARTING". Fixes: 73c1b41e63f0 ("cpu/hotplug: Cleanup state names") Signed-off-by: Sedat Dilek Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Paul Gortmaker Link: http://lkml.kernel.org/r/20161226100511.8662-1-sedat.dilek@gmail.com Signed-off-by: Thomas Gleixner --- arch/x86/events/amd/ibs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c index 05612a2529c8..496e60391fac 100644 --- a/arch/x86/events/amd/ibs.c +++ b/arch/x86/events/amd/ibs.c @@ -1010,7 +1010,7 @@ static __init int amd_ibs_init(void) * all online cpus. */ cpuhp_setup_state(CPUHP_AP_PERF_X86_AMD_IBS_STARTING, - "perf/x86/amd/ibs:STARTING", + "perf/x86/amd/ibs:starting", x86_pmu_amd_ibs_starting_cpu, x86_pmu_amd_ibs_dying_cpu); From b6fc513da50c5dbc457a8ad6b58b046a6a68fd9d Mon Sep 17 00:00:00 2001 From: Pavel Rojtberg Date: Tue, 27 Dec 2016 11:44:51 -0800 Subject: [PATCH 029/645] Input: xpad - use correct product id for x360w controllers currently the controllers get the same product id as the wireless receiver. However the controllers actually have their own product id. The patch makes the driver expose the same product id as the windows driver. This improves compatibility when running applications with WINE. see https://github.com/paroj/xpad/issues/54 Signed-off-by: Pavel Rojtberg Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 6d9499658671..c7d5b2b643d1 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1377,6 +1377,12 @@ static int xpad_init_input(struct usb_xpad *xpad) input_dev->name = xpad->name; input_dev->phys = xpad->phys; usb_to_input_id(xpad->udev, &input_dev->id); + + if (xpad->xtype == XTYPE_XBOX360W) { + /* x360w controllers and the receiver have different ids */ + input_dev->id.product = 0x02a1; + } + input_dev->dev.parent = &xpad->intf->dev; input_set_drvdata(input_dev, xpad); From d7ddad0acc4add42567f7879b116a0b9eea31860 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 27 Dec 2016 11:32:55 -0800 Subject: [PATCH 030/645] Input: synaptics-rmi4 - fix F03 build error when serio is module Since F03 is a boolean, "depends" on symbols that can be modules do not work quite right. We can enable F03 if SERIO is built-in or if both RMI core and SERIO core are modules. If SERIO core is module, but RMI is built-in, we'll get: drivers/built-in.o: In function `rmi_f03_attention': rmi_f03.c:(.text+0xf8ef8): undefined reference to `serio_interrupt' rmi_f03.c:(.text+0xf8fbd): undefined reference to `serio_interrupt' drivers/built-in.o: In function `rmi_f03_remove': rmi_f03.c:(.text+0xf9082): undefined reference to `serio_unregister_port' drivers/built-in.o: In function `rmi_f03_probe': rmi_f03.c:(.text+0xf9260): undefined reference to `__serio_register_port' Reported-by: Randy Dunlap Reviewed-by: Guenter Roeck Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig index 30cc627a4f45..8993983e3fe4 100644 --- a/drivers/input/rmi4/Kconfig +++ b/drivers/input/rmi4/Kconfig @@ -41,7 +41,8 @@ config RMI4_SMB config RMI4_F03 bool "RMI4 Function 03 (PS2 Guest)" - depends on RMI4_CORE && SERIO + depends on RMI4_CORE + depends on SERIO=y || RMI4_CORE=SERIO help Say Y here if you want to add support for RMI4 function 03. From 9396c9cb0d9534ca67bda8a34b2413a2ca1c67e9 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 22 Dec 2016 15:03:50 +0900 Subject: [PATCH 031/645] perf sched timehist: Show total scheduling time Show length of analyzed sample time and rate of idle task running. This also takes care of time range given by --time option. $ perf sched timehist -sI | tail Samples do not have callchains. Idle stats: CPU 0 idle for 930.316 msec ( 92.93%) CPU 1 idle for 963.614 msec ( 96.25%) CPU 2 idle for 885.482 msec ( 88.45%) CPU 3 idle for 938.635 msec ( 93.76%) Total number of unique tasks: 118 Total number of context switches: 2337 Total run time (msec): 3718.048 Total scheduling time (msec): 1001.131 (x 4) Suggested-by: David Ahern Signed-off-by: Namhyung Kim Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161222060350.17655-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-sched.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c index d53e706a6f17..5b134b0d1ff3 100644 --- a/tools/perf/builtin-sched.c +++ b/tools/perf/builtin-sched.c @@ -209,6 +209,7 @@ struct perf_sched { u64 skipped_samples; const char *time_str; struct perf_time_interval ptime; + struct perf_time_interval hist_time; }; /* per thread run time data */ @@ -2460,6 +2461,11 @@ static int timehist_sched_change_event(struct perf_tool *tool, timehist_print_sample(sched, sample, &al, thread, t); out: + if (sched->hist_time.start == 0 && t >= ptime->start) + sched->hist_time.start = t; + if (ptime->end == 0 || t <= ptime->end) + sched->hist_time.end = t; + if (tr) { /* time of this sched_switch event becomes last time task seen */ tr->last_time = sample->time; @@ -2624,6 +2630,7 @@ static void timehist_print_summary(struct perf_sched *sched, struct thread *t; struct thread_runtime *r; int i; + u64 hist_time = sched->hist_time.end - sched->hist_time.start; memset(&totals, 0, sizeof(totals)); @@ -2665,7 +2672,7 @@ static void timehist_print_summary(struct perf_sched *sched, totals.sched_count += r->run_stats.n; printf(" CPU %2d idle for ", i); print_sched_time(r->total_run_time, 6); - printf(" msec\n"); + printf(" msec (%6.2f%%)\n", 100.0 * r->total_run_time / hist_time); } else printf(" CPU %2d idle entire time window\n", i); } @@ -2701,12 +2708,16 @@ static void timehist_print_summary(struct perf_sched *sched, printf("\n" " Total number of unique tasks: %" PRIu64 "\n" - "Total number of context switches: %" PRIu64 "\n" - " Total run time (msec): ", + "Total number of context switches: %" PRIu64 "\n", totals.task_count, totals.sched_count); + printf(" Total run time (msec): "); print_sched_time(totals.total_run_time, 2); printf("\n"); + + printf(" Total scheduling time (msec): "); + print_sched_time(hist_time, 2); + printf(" (x %d)\n", sched->max_cpu); } typedef int (*sched_handler)(struct perf_tool *tool, From ee12996c9d392ec61241ab6c74d257bc2122e0bc Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 27 Dec 2016 21:49:17 -0300 Subject: [PATCH 032/645] samples/bpf sock_example: Avoid getting ethhdr from two includes To avoid the following build failure on Alpine Linux 3.4, that has clang-3.8 with the bpf target: HOSTCC samples/bpf/sock_example.o In file included from /usr/include/net/ethernet.h:10:0, from /git/linux/samples/bpf/sock_example.h:7, from /git/linux/samples/bpf/sock_example.c:30: /usr/include/netinet/if_ether.h:96:8: error: redefinition of 'struct ethhdr' struct ethhdr { ^ In file included from /git/linux/samples/bpf/sock_example.c:26:0: ./usr/include/linux/if_ether.h:144:8: note: originally defined here struct ethhdr { ^ scripts/Makefile.host:124: recipe for target 'samples/bpf/sock_example.o' failed make[2]: *** [samples/bpf/sock_example.o] Error 1 /git/linux/Makefile:1658: recipe for target 'samples/bpf/' failed So include net/if_ether.h for the needs of sock_example.h, using the same include that sock_example.c uses. Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Joe Stringer Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-m9avekl1b651qe1r1zd5tzz9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- samples/bpf/sock_example.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/samples/bpf/sock_example.h b/samples/bpf/sock_example.h index 09f7fe7e5fd7..d8014065d479 100644 --- a/samples/bpf/sock_example.h +++ b/samples/bpf/sock_example.h @@ -4,7 +4,7 @@ #include #include #include -#include +#include #include #include #include From abfb7b686a3e5be27bf81db62f9c5c895b76f5d1 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Sat, 24 Dec 2016 13:59:23 +0000 Subject: [PATCH 033/645] efi/libstub/arm*: Pass latest memory map to the kernel As reported by James Morse, the current libstub code involving the annotated memory map only works somewhat correctly by accident, due to the fact that a pool allocation happens to be reused immediately, retaining its former contents on most implementations of the UEFI boot services. Instead of juggling memory maps, which makes the code more complex than it needs to be, simply put placeholder values into the FDT for the memory map parameters, and only write the actual values after ExitBootServices() has been called. Reported-by: James Morse Signed-off-by: Ard Biesheuvel Cc: Cc: Jeffrey Hugo Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Fixes: ed9cc156c42f ("efi/libstub: Use efi_exit_boot_services() in FDT") Link: http://lkml.kernel.org/r/1482587963-20183-2-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- drivers/firmware/efi/libstub/efistub.h | 8 --- drivers/firmware/efi/libstub/fdt.c | 87 +++++++++++++++++--------- 2 files changed, 56 insertions(+), 39 deletions(-) diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h index b98824e3800a..0e2a96b12cb3 100644 --- a/drivers/firmware/efi/libstub/efistub.h +++ b/drivers/firmware/efi/libstub/efistub.h @@ -39,14 +39,6 @@ efi_status_t efi_file_close(void *handle); unsigned long get_dram_base(efi_system_table_t *sys_table_arg); -efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, - unsigned long orig_fdt_size, - void *fdt, int new_fdt_size, char *cmdline_ptr, - u64 initrd_addr, u64 initrd_size, - efi_memory_desc_t *memory_map, - unsigned long map_size, unsigned long desc_size, - u32 desc_ver); - efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, void *handle, unsigned long *new_fdt_addr, diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index a6a93116a8f0..921dfa047202 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -16,13 +16,10 @@ #include "efistub.h" -efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, - unsigned long orig_fdt_size, - void *fdt, int new_fdt_size, char *cmdline_ptr, - u64 initrd_addr, u64 initrd_size, - efi_memory_desc_t *memory_map, - unsigned long map_size, unsigned long desc_size, - u32 desc_ver) +static efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, + unsigned long orig_fdt_size, + void *fdt, int new_fdt_size, char *cmdline_ptr, + u64 initrd_addr, u64 initrd_size) { int node, num_rsv; int status; @@ -101,25 +98,23 @@ efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, if (status) goto fdt_set_fail; - fdt_val64 = cpu_to_fdt64((u64)(unsigned long)memory_map); + fdt_val64 = U64_MAX; /* placeholder */ status = fdt_setprop(fdt, node, "linux,uefi-mmap-start", &fdt_val64, sizeof(fdt_val64)); if (status) goto fdt_set_fail; - fdt_val32 = cpu_to_fdt32(map_size); + fdt_val32 = U32_MAX; /* placeholder */ status = fdt_setprop(fdt, node, "linux,uefi-mmap-size", &fdt_val32, sizeof(fdt_val32)); if (status) goto fdt_set_fail; - fdt_val32 = cpu_to_fdt32(desc_size); status = fdt_setprop(fdt, node, "linux,uefi-mmap-desc-size", &fdt_val32, sizeof(fdt_val32)); if (status) goto fdt_set_fail; - fdt_val32 = cpu_to_fdt32(desc_ver); status = fdt_setprop(fdt, node, "linux,uefi-mmap-desc-ver", &fdt_val32, sizeof(fdt_val32)); if (status) @@ -148,6 +143,43 @@ fdt_set_fail: return EFI_LOAD_ERROR; } +static efi_status_t update_fdt_memmap(void *fdt, struct efi_boot_memmap *map) +{ + int node = fdt_path_offset(fdt, "/chosen"); + u64 fdt_val64; + u32 fdt_val32; + int err; + + if (node < 0) + return EFI_LOAD_ERROR; + + fdt_val64 = cpu_to_fdt64((unsigned long)*map->map); + err = fdt_setprop_inplace(fdt, node, "linux,uefi-mmap-start", + &fdt_val64, sizeof(fdt_val64)); + if (err) + return EFI_LOAD_ERROR; + + fdt_val32 = cpu_to_fdt32(*map->map_size); + err = fdt_setprop_inplace(fdt, node, "linux,uefi-mmap-size", + &fdt_val32, sizeof(fdt_val32)); + if (err) + return EFI_LOAD_ERROR; + + fdt_val32 = cpu_to_fdt32(*map->desc_size); + err = fdt_setprop_inplace(fdt, node, "linux,uefi-mmap-desc-size", + &fdt_val32, sizeof(fdt_val32)); + if (err) + return EFI_LOAD_ERROR; + + fdt_val32 = cpu_to_fdt32(*map->desc_ver); + err = fdt_setprop_inplace(fdt, node, "linux,uefi-mmap-desc-ver", + &fdt_val32, sizeof(fdt_val32)); + if (err) + return EFI_LOAD_ERROR; + + return EFI_SUCCESS; +} + #ifndef EFI_FDT_ALIGN #define EFI_FDT_ALIGN EFI_PAGE_SIZE #endif @@ -243,20 +275,10 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, goto fail; } - /* - * Now that we have done our final memory allocation (and free) - * we can get the memory map key needed for - * exit_boot_services(). - */ - status = efi_get_memory_map(sys_table, &map); - if (status != EFI_SUCCESS) - goto fail_free_new_fdt; - status = update_fdt(sys_table, (void *)fdt_addr, fdt_size, (void *)*new_fdt_addr, new_fdt_size, - cmdline_ptr, initrd_addr, initrd_size, - memory_map, map_size, desc_size, desc_ver); + cmdline_ptr, initrd_addr, initrd_size); /* Succeeding the first time is the expected case. */ if (status == EFI_SUCCESS) @@ -266,20 +288,16 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, /* * We need to allocate more space for the new * device tree, so free existing buffer that is - * too small. Also free memory map, as we will need - * to get new one that reflects the free/alloc we do - * on the device tree buffer. + * too small. */ efi_free(sys_table, new_fdt_size, *new_fdt_addr); - sys_table->boottime->free_pool(memory_map); new_fdt_size += EFI_PAGE_SIZE; } else { pr_efi_err(sys_table, "Unable to construct new device tree.\n"); - goto fail_free_mmap; + goto fail_free_new_fdt; } } - sys_table->boottime->free_pool(memory_map); priv.runtime_map = runtime_map; priv.runtime_entry_count = &runtime_entry_count; status = efi_exit_boot_services(sys_table, handle, &map, &priv, @@ -288,6 +306,16 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, if (status == EFI_SUCCESS) { efi_set_virtual_address_map_t *svam; + status = update_fdt_memmap((void *)*new_fdt_addr, &map); + if (status != EFI_SUCCESS) { + /* + * The kernel won't get far without the memory map, but + * may still be able to print something meaningful so + * return success here. + */ + return EFI_SUCCESS; + } + /* Install the new virtual address map */ svam = sys_table->runtime->set_virtual_address_map; status = svam(runtime_entry_count * desc_size, desc_size, @@ -319,9 +347,6 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, pr_efi_err(sys_table, "Exit boot services failed.\n"); -fail_free_mmap: - sys_table->boottime->free_pool(memory_map); - fail_free_new_fdt: efi_free(sys_table, new_fdt_size, *new_fdt_addr); From b6f4c66704b875aba9b8c912532323e3cc89824c Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 28 Dec 2016 10:47:13 -0300 Subject: [PATCH 034/645] samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Joe Stringer Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-3awp0nv8tpnblatojmwjww7z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- samples/bpf/trace_output_user.c | 1 - 1 file changed, 1 deletion(-) diff --git a/samples/bpf/trace_output_user.c b/samples/bpf/trace_output_user.c index f4fa6af22def..ccca1e348017 100644 --- a/samples/bpf/trace_output_user.c +++ b/samples/bpf/trace_output_user.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include #include From 6f96d639915f9f2bc43b538aedd4bffacd24ceeb Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 7 Dec 2016 19:18:35 +0200 Subject: [PATCH 035/645] MAINTAINERS: Add Patchwork URL to Samsung Exynos entry I use Patchwork for handling incoming patches. Put its address here so submitters could know what is in the queue. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Acked-by: Kukjin Kim --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index cfff2c9e3d94..5522050114a6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1689,6 +1689,7 @@ M: Krzysztof Kozlowski R: Javier Martinez Canillas L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) +Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/ S: Maintained F: arch/arm/boot/dts/s3c* F: arch/arm/boot/dts/s5p* From 88b333b0ed790f9433ff542b163bf972953b74d3 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Tue, 20 Dec 2016 08:54:29 -0700 Subject: [PATCH 036/645] drm/msm: Ensure that the hardware write pointer is valid Currently the value written to CP_RB_WPTR is calculated on the fly as (rb->next - rb->start). But as the code is designed rb->next is wrapped before writing the commands so if a series of commands happened to fit perfectly in the ringbuffer, rb->next would end up being equal to rb->size / 4 and thus result in an out of bounds address to CP_RB_WPTR. The easiest way to fix this is to mask WPTR when writing it to the hardware; it makes the hardware happy and the rest of the ringbuffer math appears to work and there isn't any point in upsetting anything. Signed-off-by: Jordan Crouse [squash in is_power_of_2() check] Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 9 ++++++++- drivers/gpu/drm/msm/msm_ringbuffer.c | 3 ++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index a18126150e11..14ff87686a36 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -213,7 +213,14 @@ void adreno_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit, void adreno_flush(struct msm_gpu *gpu) { struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); - uint32_t wptr = get_wptr(gpu->rb); + uint32_t wptr; + + /* + * Mask wptr value that we calculate to fit in the HW range. This is + * to account for the possibility that the last command fit exactly into + * the ringbuffer and rb->next hasn't wrapped to zero yet + */ + wptr = get_wptr(gpu->rb) & ((gpu->rb->size / 4) - 1); /* ensure writes to ringbuffer have hit system memory: */ mb(); diff --git a/drivers/gpu/drm/msm/msm_ringbuffer.c b/drivers/gpu/drm/msm/msm_ringbuffer.c index f326cf6a32e6..67b34e069abf 100644 --- a/drivers/gpu/drm/msm/msm_ringbuffer.c +++ b/drivers/gpu/drm/msm/msm_ringbuffer.c @@ -23,7 +23,8 @@ struct msm_ringbuffer *msm_ringbuffer_new(struct msm_gpu *gpu, int size) struct msm_ringbuffer *ring; int ret; - size = ALIGN(size, 4); /* size should be dword aligned */ + if (WARN_ON(!is_power_of_2(size))) + return ERR_PTR(-EINVAL); ring = kzalloc(sizeof(*ring), GFP_KERNEL); if (!ring) { From 6490abc4bc35fa4f3bdb9c7e49096943c50e29ea Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Tue, 20 Dec 2016 08:54:30 -0700 Subject: [PATCH 037/645] drm/msm: Put back the vaddr in submit_reloc() The error cases in submit_reloc() need to put back the virtual address of the bo before failling. Add a single failure path for the function. Signed-off-by: Jordan Crouse Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 166e84e4f0d4..b6411ea6ed17 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -290,7 +290,7 @@ static int submit_reloc(struct msm_gem_submit *submit, struct msm_gem_object *ob { uint32_t i, last_offset = 0; uint32_t *ptr; - int ret; + int ret = 0; if (offset % 4) { DRM_ERROR("non-aligned cmdstream buffer: %u\n", offset); @@ -318,12 +318,13 @@ static int submit_reloc(struct msm_gem_submit *submit, struct msm_gem_object *ob ret = copy_from_user(&submit_reloc, userptr, sizeof(submit_reloc)); if (ret) - return -EFAULT; + goto out; if (submit_reloc.submit_offset % 4) { DRM_ERROR("non-aligned reloc offset: %u\n", submit_reloc.submit_offset); - return -EINVAL; + ret = -EINVAL; + goto out; } /* offset in dwords: */ @@ -332,12 +333,13 @@ static int submit_reloc(struct msm_gem_submit *submit, struct msm_gem_object *ob if ((off >= (obj->base.size / 4)) || (off < last_offset)) { DRM_ERROR("invalid offset %u at reloc %u\n", off, i); - return -EINVAL; + ret = -EINVAL; + goto out; } ret = submit_bo(submit, submit_reloc.reloc_idx, NULL, &iova, &valid); if (ret) - return ret; + goto out; if (valid) continue; @@ -354,9 +356,10 @@ static int submit_reloc(struct msm_gem_submit *submit, struct msm_gem_object *ob last_offset = off; } +out: msm_gem_put_vaddr_locked(&obj->base); - return 0; + return ret; } static void submit_cleanup(struct msm_gem_submit *submit) From a6cb3b864b21b7345f824a4faa12b723c8aaf099 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Tue, 20 Dec 2016 08:54:31 -0700 Subject: [PATCH 038/645] drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set For every submission buffer object one of MSM_SUBMIT_BO_WRITE and MSM_SUBMIT_BO_READ must be set (and nothing else). If we allowed zero then the buffer object would never get queued to be unreferenced. Signed-off-by: Jordan Crouse Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index b6411ea6ed17..489676568a10 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -106,7 +106,8 @@ static int submit_lookup_objects(struct msm_gem_submit *submit, pagefault_disable(); } - if (submit_bo.flags & ~MSM_SUBMIT_BO_FLAGS) { + if ((submit_bo.flags & ~MSM_SUBMIT_BO_FLAGS) || + !(submit_bo.flags & MSM_SUBMIT_BO_FLAGS)) { DRM_ERROR("invalid flags: %x\n", submit_bo.flags); ret = -EINVAL; goto out_unlock; From abc8d5832fd142d565fbfca163348f33b08bc1fe Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 16 Dec 2016 10:08:14 +0100 Subject: [PATCH 039/645] gpio: mxs: remove __init annotation Building with an old toolchain, I ran into this warning: WARNING: vmlinux.o(.text+0x63eef0): Section mismatch in reference from the function mxs_gpio_probe() to the function .init.text:mxs_gpio_init_gc() Clearly the annotation is wrong, since the function is called from the non-init probe, so let's remove it. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mxs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index 1e8fde8cb803..2292742eac8f 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -205,7 +205,7 @@ static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) return 0; } -static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base) +static int mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base) { struct irq_chip_generic *gc; struct irq_chip_type *ct; From 5018ada69a04c8ac21d74bd682fceb8e42dc0f96 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 19 Dec 2016 18:29:23 +0100 Subject: [PATCH 040/645] gpio: Move freeing of GPIO hogs before numbing of the device When removing a gpiochip that uses GPIO hogging (e.g. by unloading the chip's DT overlay), a warning is printed: gpio gpiochip8: REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED This happens because gpiochip_free_hogs() is called after the gdev->chip pointer is reset to NULL. Hence __gpiod_free() cannot determine the chip in use, and cannot clear flags nor call the optional chip-specific .free() callback. Move the call to gpiochip_free_hogs() up to fix this. Cc: stable@vger.kernel.org Fixes: ff2b135922992756 ("gpio: make the gpiochip a real device") Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f4c26c7826cd..86bf3b84ada5 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1317,12 +1317,12 @@ void gpiochip_remove(struct gpio_chip *chip) /* FIXME: should the legacy sysfs handling be moved to gpio_device? */ gpiochip_sysfs_unregister(gdev); + gpiochip_free_hogs(chip); /* Numb the device, cancelling all outstanding operations */ gdev->chip = NULL; gpiochip_irqchip_remove(chip); acpi_gpiochip_remove(chip); gpiochip_remove_pin_ranges(chip); - gpiochip_free_hogs(chip); of_gpiochip_remove(chip); /* * We accept no more calls into the driver from this point, so From 07825f0acd85dd8b7481d5ef0eb024b05364d892 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 29 Dec 2016 17:44:15 +0800 Subject: [PATCH 041/645] crypto: aesni - Fix failure when built-in with modular pcbc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If aesni is built-in but pcbc is built as a module, then aesni will fail completely because when it tries to register the pcbc variant of aes the pcbc template is not available. This patch fixes this by modifying the pcbc presence test so that if aesni is built-in then pcbc must also be built-in for it to be used by aesni. Fixes: 85671860caac ("crypto: aesni - Convert to skcipher") Reported-by: Stephan Müller Signed-off-by: Herbert Xu --- arch/x86/crypto/aesni-intel_glue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index 31c34ee131f3..6ef688a1ef3e 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -1020,7 +1020,8 @@ struct { const char *basename; struct simd_skcipher_alg *simd; } aesni_simd_skciphers2[] = { -#if IS_ENABLED(CONFIG_CRYPTO_PCBC) +#if (defined(MODULE) && IS_ENABLED(CONFIG_CRYPTO_PCBC)) || \ + IS_BUILTIN(CONFIG_CRYPTO_PCBC) { .algname = "pcbc(aes)", .drvname = "pcbc-aes-aesni", From 63447646ac657fde00bb658ce21a3431940ae0ad Mon Sep 17 00:00:00 2001 From: Loic Pallardy Date: Thu, 15 Dec 2016 15:49:56 +0100 Subject: [PATCH 042/645] rpmsg: virtio_rpmsg_bus: fix channel creation Since commit 4dffed5b3ac796b ("rpmsg: Name rpmsg devices based on channel id"), it is no more possible for a firmware to register twice a service (on different endpoints). rpmsg_register_device function is failing when calling device_add for the second time as second device has the same name as first one already register. It is because name is based only on service name and so is not more unique. Previously name was unique thanks to the use of rpmsg_dev_index. This patch adds destination and source endpoint numbers device name to create an unique identifier. Fixes: 4dffed5b3ac7 ("rpmsg: Name rpmsg devices based on channel id") Acked-by: Peter Griffin Signed-off-by: Loic Pallardy [bjorn: flipped name and address in device name] Signed-off-by: Bjorn Andersson --- drivers/rpmsg/rpmsg_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c index a79cb5a9e5f2..1cfb775e8e82 100644 --- a/drivers/rpmsg/rpmsg_core.c +++ b/drivers/rpmsg/rpmsg_core.c @@ -453,8 +453,8 @@ int rpmsg_register_device(struct rpmsg_device *rpdev) struct device *dev = &rpdev->dev; int ret; - dev_set_name(&rpdev->dev, "%s:%s", - dev_name(dev->parent), rpdev->id.name); + dev_set_name(&rpdev->dev, "%s.%s.%d.%d", dev_name(dev->parent), + rpdev->id.name, rpdev->src, rpdev->dst); rpdev->dev.bus = &rpmsg_bus; rpdev->dev.release = rpmsg_release_device; From c81c0e0710f031cb09eb7cbf0e75e6754d1d8346 Mon Sep 17 00:00:00 2001 From: Loic Pallardy Date: Wed, 14 Dec 2016 16:11:00 +0100 Subject: [PATCH 043/645] remoteproc: fix vdev reference management Commit 2b45cef5868a ("remoteproc: Further extend the vdev life cycle") extends kref support for vdev management. It introduces a regression when following sequence is executed: rproc_boot --> rproc_shutdown --> rproc_boot Second rproc_boot call crashes on register_virtio_device as device is already existing. Issue is previous vdev is never released when rproc is stop because associated refcount is too high. kref_get introduces is not needed as kref_init already initializes krefcount to 1 because it considers associated variable as used. This introduces a misalignment between kref_get and kref_put calls. Fixes: 2b45cef5868a ("remoteproc: Further extend the vdev life cycle") Signed-off-by: Loic Pallardy Signed-off-by: Bjorn Andersson --- drivers/remoteproc/remoteproc_core.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 9a507e77eced..feb24c43d4c7 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -396,9 +396,6 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc, goto unwind_vring_allocations; } - /* track the rvdevs list reference */ - kref_get(&rvdev->refcount); - list_add_tail(&rvdev->node, &rproc->rvdevs); rproc_add_subdev(rproc, &rvdev->subdev, From a0c10687ec9506b5e14fe3dd47832a77f2f2500c Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 30 Dec 2016 03:21:38 -0800 Subject: [PATCH 044/645] Revert "remoteproc: Merge table_ptr and cached_table pointers" Following any fw_rsc_vdev entries in the resource table are two variable length arrays, the first one reference vring resources and the second one is the virtio config space. The virtio config space is used by virtio to communicate status and configuration changes and must as such be shared with the remote. The reverted commit incorrectly made any changes to the virtio config space only affect the local copy, in an attempt to allowing memory protection of the shared resource table. This reverts commit cda8529346935fc86f476999ac4fbfe4e17abf11. Signed-off-by: Bjorn Andersson --- drivers/remoteproc/remoteproc_core.c | 26 ++++++++++++++++---------- include/linux/remoteproc.h | 4 +++- 2 files changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index feb24c43d4c7..90b05c72186c 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -886,13 +886,15 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) /* * Create a copy of the resource table. When a virtio device starts * and calls vring_new_virtqueue() the address of the allocated vring - * will be stored in the table_ptr. Before the device is started, - * table_ptr will be copied into device memory. + * will be stored in the cached_table. Before the device is started, + * cached_table will be copied into device memory. */ - rproc->table_ptr = kmemdup(table, tablesz, GFP_KERNEL); - if (!rproc->table_ptr) + rproc->cached_table = kmemdup(table, tablesz, GFP_KERNEL); + if (!rproc->cached_table) goto clean_up; + rproc->table_ptr = rproc->cached_table; + /* reset max_notifyid */ rproc->max_notifyid = -1; @@ -911,16 +913,18 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) } /* - * The starting device has been given the rproc->table_ptr as the + * The starting device has been given the rproc->cached_table as the * resource table. The address of the vring along with the other - * allocated resources (carveouts etc) is stored in table_ptr. + * allocated resources (carveouts etc) is stored in cached_table. * In order to pass this information to the remote device we must copy * this information to device memory. We also update the table_ptr so * that any subsequent changes will be applied to the loaded version. */ loaded_table = rproc_find_loaded_rsc_table(rproc, fw); - if (loaded_table) - memcpy(loaded_table, rproc->table_ptr, tablesz); + if (loaded_table) { + memcpy(loaded_table, rproc->cached_table, tablesz); + rproc->table_ptr = loaded_table; + } /* power up the remote processor */ ret = rproc->ops->start(rproc); @@ -948,7 +952,8 @@ stop_rproc: clean_up_resources: rproc_resource_cleanup(rproc); clean_up: - kfree(rproc->table_ptr); + kfree(rproc->cached_table); + rproc->cached_table = NULL; rproc->table_ptr = NULL; rproc_disable_iommu(rproc); @@ -1182,7 +1187,8 @@ void rproc_shutdown(struct rproc *rproc) rproc_disable_iommu(rproc); /* Free the copy of the resource table */ - kfree(rproc->table_ptr); + kfree(rproc->cached_table); + rproc->cached_table = NULL; rproc->table_ptr = NULL; /* if in crash state, unlock crash handler */ diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index e2f3a3281d8f..8265d351c9f0 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -408,7 +408,8 @@ enum rproc_crash_type { * @crash_comp: completion used to sync crash handler and the rproc reload * @recovery_disabled: flag that state if recovery was disabled * @max_notifyid: largest allocated notify id. - * @table_ptr: our copy of the resource table + * @table_ptr: pointer to the resource table in effect + * @cached_table: copy of the resource table * @has_iommu: flag to indicate if remote processor is behind an MMU */ struct rproc { @@ -440,6 +441,7 @@ struct rproc { bool recovery_disabled; int max_notifyid; struct resource_table *table_ptr; + struct resource_table *cached_table; bool has_iommu; bool auto_boot; }; From 570b90fa230b8021f51a67fab2245fe8df6fe37d Mon Sep 17 00:00:00 2001 From: Andrew Lutomirski Date: Mon, 12 Dec 2016 12:55:55 -0800 Subject: [PATCH 045/645] orinoco: Use shash instead of ahash for MIC calculations Eric Biggers pointed out that the orinoco driver pointed scatterlists at the stack. Fix it by switching from ahash to shash. The result should be simpler, faster, and more correct. kvalo: cherry picked from commit 1fef293b8a9850cfa124a53c1d8878d355010403 as I accidentally applied this patch to wireless-drivers-next when I was supposed to apply this wireless-drivers Cc: stable@vger.kernel.org # 4.9 only Reported-by: Eric Biggers Signed-off-by: Andy Lutomirski Signed-off-by: Kalle Valo --- drivers/net/wireless/intersil/orinoco/mic.c | 44 +++++++++++-------- drivers/net/wireless/intersil/orinoco/mic.h | 3 +- .../net/wireless/intersil/orinoco/orinoco.h | 4 +- 3 files changed, 30 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/intersil/orinoco/mic.c b/drivers/net/wireless/intersil/orinoco/mic.c index bc7397d709d3..08bc7822f820 100644 --- a/drivers/net/wireless/intersil/orinoco/mic.c +++ b/drivers/net/wireless/intersil/orinoco/mic.c @@ -16,7 +16,7 @@ /********************************************************************/ int orinoco_mic_init(struct orinoco_private *priv) { - priv->tx_tfm_mic = crypto_alloc_ahash("michael_mic", 0, + priv->tx_tfm_mic = crypto_alloc_shash("michael_mic", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(priv->tx_tfm_mic)) { printk(KERN_DEBUG "orinoco_mic_init: could not allocate " @@ -25,7 +25,7 @@ int orinoco_mic_init(struct orinoco_private *priv) return -ENOMEM; } - priv->rx_tfm_mic = crypto_alloc_ahash("michael_mic", 0, + priv->rx_tfm_mic = crypto_alloc_shash("michael_mic", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(priv->rx_tfm_mic)) { printk(KERN_DEBUG "orinoco_mic_init: could not allocate " @@ -40,17 +40,16 @@ int orinoco_mic_init(struct orinoco_private *priv) void orinoco_mic_free(struct orinoco_private *priv) { if (priv->tx_tfm_mic) - crypto_free_ahash(priv->tx_tfm_mic); + crypto_free_shash(priv->tx_tfm_mic); if (priv->rx_tfm_mic) - crypto_free_ahash(priv->rx_tfm_mic); + crypto_free_shash(priv->rx_tfm_mic); } -int orinoco_mic(struct crypto_ahash *tfm_michael, u8 *key, +int orinoco_mic(struct crypto_shash *tfm_michael, u8 *key, u8 *da, u8 *sa, u8 priority, u8 *data, size_t data_len, u8 *mic) { - AHASH_REQUEST_ON_STACK(req, tfm_michael); - struct scatterlist sg[2]; + SHASH_DESC_ON_STACK(desc, tfm_michael); u8 hdr[ETH_HLEN + 2]; /* size of header + padding */ int err; @@ -67,18 +66,27 @@ int orinoco_mic(struct crypto_ahash *tfm_michael, u8 *key, hdr[ETH_ALEN * 2 + 2] = 0; hdr[ETH_ALEN * 2 + 3] = 0; - /* Use scatter gather to MIC header and data in one go */ - sg_init_table(sg, 2); - sg_set_buf(&sg[0], hdr, sizeof(hdr)); - sg_set_buf(&sg[1], data, data_len); + desc->tfm = tfm_michael; + desc->flags = 0; - if (crypto_ahash_setkey(tfm_michael, key, MIC_KEYLEN)) - return -1; + err = crypto_shash_setkey(tfm_michael, key, MIC_KEYLEN); + if (err) + return err; + + err = crypto_shash_init(desc); + if (err) + return err; + + err = crypto_shash_update(desc, hdr, sizeof(hdr)); + if (err) + return err; + + err = crypto_shash_update(desc, data, data_len); + if (err) + return err; + + err = crypto_shash_final(desc, mic); + shash_desc_zero(desc); - ahash_request_set_tfm(req, tfm_michael); - ahash_request_set_callback(req, 0, NULL, NULL); - ahash_request_set_crypt(req, sg, mic, data_len + sizeof(hdr)); - err = crypto_ahash_digest(req); - ahash_request_zero(req); return err; } diff --git a/drivers/net/wireless/intersil/orinoco/mic.h b/drivers/net/wireless/intersil/orinoco/mic.h index ce731d05cc98..e8724e889219 100644 --- a/drivers/net/wireless/intersil/orinoco/mic.h +++ b/drivers/net/wireless/intersil/orinoco/mic.h @@ -6,6 +6,7 @@ #define _ORINOCO_MIC_H_ #include +#include #define MICHAEL_MIC_LEN 8 @@ -15,7 +16,7 @@ struct crypto_ahash; int orinoco_mic_init(struct orinoco_private *priv); void orinoco_mic_free(struct orinoco_private *priv); -int orinoco_mic(struct crypto_ahash *tfm_michael, u8 *key, +int orinoco_mic(struct crypto_shash *tfm_michael, u8 *key, u8 *da, u8 *sa, u8 priority, u8 *data, size_t data_len, u8 *mic); diff --git a/drivers/net/wireless/intersil/orinoco/orinoco.h b/drivers/net/wireless/intersil/orinoco/orinoco.h index 2f0c84b1c440..5fa1c3e3713f 100644 --- a/drivers/net/wireless/intersil/orinoco/orinoco.h +++ b/drivers/net/wireless/intersil/orinoco/orinoco.h @@ -152,8 +152,8 @@ struct orinoco_private { u8 *wpa_ie; int wpa_ie_len; - struct crypto_ahash *rx_tfm_mic; - struct crypto_ahash *tx_tfm_mic; + struct crypto_shash *rx_tfm_mic; + struct crypto_shash *tx_tfm_mic; unsigned int wpa_enabled:1; unsigned int tkip_cm_active:1; From 60f59ce0278557f7896d5158ae6d12a4855a72cc Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 21 Dec 2016 11:18:55 -0600 Subject: [PATCH 046/645] rtlwifi: rtl_usb: Fix missing entry in USB driver's private data These drivers need to be able to reference "struct ieee80211_hw" from the driver's private data, and vice versa. The USB driver failed to store the address of ieee80211_hw in the private data. Although this bug has been present for a long time, it was not exposed until commit ba9f93f82aba ("rtlwifi: Fix enter/exit power_save"). Fixes: ba9f93f82aba ("rtlwifi: Fix enter/exit power_save") Signed-off-by: Larry Finger Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c index 0a508649903d..49015b05f3d1 100644 --- a/drivers/net/wireless/realtek/rtlwifi/usb.c +++ b/drivers/net/wireless/realtek/rtlwifi/usb.c @@ -1063,6 +1063,7 @@ int rtl_usb_probe(struct usb_interface *intf, return -ENOMEM; } rtlpriv = hw->priv; + rtlpriv->hw = hw; rtlpriv->usb_data = kzalloc(RTL_USB_MAX_RX_COUNT * sizeof(u32), GFP_KERNEL); if (!rtlpriv->usb_data) From 14221cc45caad2fcab3a8543234bb7eda9b540d5 Mon Sep 17 00:00:00 2001 From: Artur Molchanov Date: Fri, 30 Dec 2016 19:46:36 +0300 Subject: [PATCH 047/645] bridge: netfilter: Fix dropping packets that moving through bridge interface Problem: br_nf_pre_routing_finish() calls itself instead of br_nf_pre_routing_finish_bridge(). Due to this bug reverse path filter drops packets that go through bridge interface. User impact: Local docker containers with bridge network can not communicate with each other. Fixes: c5136b15ea36 ("netfilter: bridge: add and use br_nf_hook_thresh") Signed-off-by: Artur Molchanov Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/bridge/br_netfilter_hooks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c index b12501a77f18..135cc8ab813c 100644 --- a/net/bridge/br_netfilter_hooks.c +++ b/net/bridge/br_netfilter_hooks.c @@ -399,7 +399,7 @@ bridged_dnat: br_nf_hook_thresh(NF_BR_PRE_ROUTING, net, sk, skb, skb->dev, NULL, - br_nf_pre_routing_finish); + br_nf_pre_routing_finish_bridge); return 0; } ether_addr_copy(eth_hdr(skb)->h_dest, dev->dev_addr); From d2e3a1358c37cd82eef92b5e908b4f0472194481 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 29 Dec 2016 14:11:21 +0100 Subject: [PATCH 048/645] ASoC: Fix binding and probing of auxiliary components Currently binding of auxiliary devices doesn't work as in soc_bind_aux_dev() function a bound component is not being added to any list and in soc_probe_aux_devices() we are trying to walk the component_dev_list list to probe auxiliary components but at that time this list doesn't contain any auxiliary components since they are being added to the card only in soc_probe_component(). This patch adds a list to the card where are stored bound but not probed auxiliary devices, so that all aux devices can be probed. Fixes: 1a653aa44725 "ASoC: core: replace aux_comp_list to component_dev_list" Signed-off-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- include/sound/soc.h | 3 +++ sound/soc/soc-core.c | 10 +++++----- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 2b502f6cc6d0..b86168a21d56 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -813,6 +813,7 @@ struct snd_soc_component { unsigned int suspended:1; /* is in suspend PM state */ struct list_head list; + struct list_head card_aux_list; /* for auxiliary bound components */ struct list_head card_list; struct snd_soc_dai_driver *dai_drv; @@ -1152,6 +1153,7 @@ struct snd_soc_card { */ struct snd_soc_aux_dev *aux_dev; int num_aux_devs; + struct list_head aux_comp_list; const struct snd_kcontrol_new *controls; int num_controls; @@ -1547,6 +1549,7 @@ static inline void snd_soc_initialize_card_lists(struct snd_soc_card *card) INIT_LIST_HEAD(&card->widgets); INIT_LIST_HEAD(&card->paths); INIT_LIST_HEAD(&card->dapm_list); + INIT_LIST_HEAD(&card->aux_comp_list); INIT_LIST_HEAD(&card->component_dev_list); } diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index f1901bb1466e..baa1afa41e3d 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1748,6 +1748,7 @@ static int soc_bind_aux_dev(struct snd_soc_card *card, int num) component->init = aux_dev->init; component->auxiliary = 1; + list_add(&component->card_aux_list, &card->aux_comp_list); return 0; @@ -1758,16 +1759,14 @@ err_defer: static int soc_probe_aux_devices(struct snd_soc_card *card) { - struct snd_soc_component *comp; + struct snd_soc_component *comp, *tmp; int order; int ret; for (order = SND_SOC_COMP_ORDER_FIRST; order <= SND_SOC_COMP_ORDER_LAST; order++) { - list_for_each_entry(comp, &card->component_dev_list, card_list) { - if (!comp->auxiliary) - continue; - + list_for_each_entry_safe(comp, tmp, &card->aux_comp_list, + card_aux_list) { if (comp->driver->probe_order == order) { ret = soc_probe_component(card, comp); if (ret < 0) { @@ -1776,6 +1775,7 @@ static int soc_probe_aux_devices(struct snd_soc_card *card) comp->name, ret); return ret; } + list_del(&comp->card_aux_list); } } } From 63c3194b82530bd71fd49db84eb7ab656b8d404a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 23 Dec 2016 11:21:10 +0200 Subject: [PATCH 049/645] ASoC: tlv320aic3x: Mark the RESET register as volatile The RESET register only have one self clearing bit and it should not be cached. If it is cached, when we sync the registers back to the chip we will initiate a software reset as well, which is not desirable. Signed-off-by: Peter Ujfalusi Reviewed-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic3x.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 8877b74b0510..bb94d50052d7 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -126,6 +126,16 @@ static const struct reg_default aic3x_reg[] = { { 108, 0x00 }, { 109, 0x00 }, }; +static bool aic3x_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case AIC3X_RESET: + return true; + default: + return false; + } +} + static const struct regmap_config aic3x_regmap = { .reg_bits = 8, .val_bits = 8, @@ -133,6 +143,9 @@ static const struct regmap_config aic3x_regmap = { .max_register = DAC_ICC_ADJ, .reg_defaults = aic3x_reg, .num_reg_defaults = ARRAY_SIZE(aic3x_reg), + + .volatile_reg = aic3x_volatile_reg, + .cache_type = REGCACHE_RBTREE, }; From 13288bdf4adbaa6bd1267f10044c1bc25d90ce7f Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Thu, 22 Dec 2016 17:18:12 +0800 Subject: [PATCH 050/645] spi: dw: Make debugfs name unique between instances Some system have multiple dw devices. Currently the driver uses a fixed name for the debugfs dir. Append dev name to the debugfs dir name to make it unique. Signed-off-by: Phil Reid Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index b715a26a9148..054012f87567 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -107,7 +107,10 @@ static const struct file_operations dw_spi_regs_ops = { static int dw_spi_debugfs_init(struct dw_spi *dws) { - dws->debugfs = debugfs_create_dir("dw_spi", NULL); + char name[128]; + + snprintf(name, 128, "dw_spi-%s", dev_name(&dws->master->dev)); + dws->debugfs = debugfs_create_dir(name, NULL); if (!dws->debugfs) return -ENOMEM; From 91ce54978ccece323aa6df930249ff84a7d233c7 Mon Sep 17 00:00:00 2001 From: G Kranthi Date: Tue, 20 Dec 2016 12:46:45 +0530 Subject: [PATCH 051/645] ASoC: Intel: Skylake: Fix to fail safely if module not available in path If a module is not available in a pipeline, fail safely rather than causing oops. Signed-off-by: G Kranthi Signed-off-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-pcm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 84b5101e6ca6..6c6b63a6b338 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -180,6 +180,9 @@ static int skl_pcm_open(struct snd_pcm_substream *substream, snd_pcm_set_sync(substream); mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream); + if (!mconfig) + return -EINVAL; + skl_tplg_d0i3_get(skl, mconfig->d0i3_caps); return 0; From a33b56a6a824fa5cd89c74f85cbeb9af1dcef87e Mon Sep 17 00:00:00 2001 From: John Hsu Date: Tue, 20 Dec 2016 16:47:06 +0800 Subject: [PATCH 052/645] ASoC: nau8825: correct the function name of register Change to correct name of the register function. Signed-off-by: John Hsu Signed-off-by: Mark Brown --- sound/soc/codecs/nau8825.c | 6 +++--- sound/soc/codecs/nau8825.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index efe3a44658d5..abf77dd422f4 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -561,9 +561,9 @@ static void nau8825_xtalk_prepare(struct nau8825 *nau8825) nau8825_xtalk_backup(nau8825); /* Config IIS as master to output signal by codec */ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, - NAU8825_I2S_MS_MASK | NAU8825_I2S_DRV_MASK | + NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER | - (0x2 << NAU8825_I2S_DRV_SFT) | 0x1); + (0x2 << NAU8825_I2S_LRC_DIV_SFT) | 0x1); /* Ramp up headphone volume to 0dB to get better performance and * avoid pop noise in headphone. */ @@ -657,7 +657,7 @@ static void nau8825_xtalk_clean(struct nau8825 *nau8825) NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN); /* Recover default value for IIS */ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, - NAU8825_I2S_MS_MASK | NAU8825_I2S_DRV_MASK | + NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE); /* Restore value of specific register for cross talk */ nau8825_xtalk_restore(nau8825); diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 5d1704e73241..b6b21b312854 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -247,8 +247,8 @@ /* I2S_PCM_CTRL2 (0x1d) */ #define NAU8825_I2S_TRISTATE (1 << 15) /* 0 - normal mode, 1 - Hi-Z output */ -#define NAU8825_I2S_DRV_SFT 12 -#define NAU8825_I2S_DRV_MASK (0x3 << NAU8825_I2S_DRV_SFT) +#define NAU8825_I2S_LRC_DIV_SFT 12 +#define NAU8825_I2S_LRC_DIV_MASK (0x3 << NAU8825_I2S_LRC_DIV_SFT) #define NAU8825_I2S_MS_SFT 3 #define NAU8825_I2S_MS_MASK (1 << NAU8825_I2S_MS_SFT) #define NAU8825_I2S_MS_MASTER (1 << NAU8825_I2S_MS_SFT) From a1792cda51300e15b03549cccf0b09f3be82e697 Mon Sep 17 00:00:00 2001 From: John Hsu Date: Tue, 20 Dec 2016 12:03:09 +0800 Subject: [PATCH 053/645] ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL The clk_ref_div is not configured in the correct position of the register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned the wrong value. Signed-off-by: John Hsu Signed-off-by: Mark Brown --- sound/soc/codecs/nau8825.c | 3 ++- sound/soc/codecs/nau8825.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index abf77dd422f4..4576f987a4a5 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -2006,7 +2006,8 @@ static void nau8825_fll_apply(struct nau8825 *nau8825, NAU8825_FLL_INTEGER_MASK, fll_param->fll_int); /* FLL pre-scaler */ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL4, - NAU8825_FLL_REF_DIV_MASK, fll_param->clk_ref_div); + NAU8825_FLL_REF_DIV_MASK, + fll_param->clk_ref_div << NAU8825_FLL_REF_DIV_SFT); /* select divided VCO input */ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF); diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index b6b21b312854..514fd13c2f46 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -137,7 +137,8 @@ #define NAU8825_FLL_CLK_SRC_FS (0x3 << NAU8825_FLL_CLK_SRC_SFT) /* FLL4 (0x07) */ -#define NAU8825_FLL_REF_DIV_MASK (0x3 << 10) +#define NAU8825_FLL_REF_DIV_SFT 10 +#define NAU8825_FLL_REF_DIV_MASK (0x3 << NAU8825_FLL_REF_DIV_SFT) /* FLL5 (0x08) */ #define NAU8825_FLL_PDB_DAC_EN (0x1 << 15) From 1594c18fd297a8edcc72bc4b161f3f52603ebb92 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 13 Dec 2016 11:15:21 -0700 Subject: [PATCH 054/645] dmaengine: ioatdma: Add Skylake PCI Dev ID Adding Skylake Xeon PCI device ids for ioatdma and related bits. Signed-off-by: Dave Jiang Signed-off-by: Vinod Koul --- drivers/dma/ioat/hw.h | 2 ++ drivers/dma/ioat/init.c | 9 ++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ioat/hw.h b/drivers/dma/ioat/hw.h index 8e67895bcca3..abcc51b343ce 100644 --- a/drivers/dma/ioat/hw.h +++ b/drivers/dma/ioat/hw.h @@ -64,6 +64,8 @@ #define PCI_DEVICE_ID_INTEL_IOAT_BDX8 0x6f2e #define PCI_DEVICE_ID_INTEL_IOAT_BDX9 0x6f2f +#define PCI_DEVICE_ID_INTEL_IOAT_SKX 0x2021 + #define IOAT_VER_1_2 0x12 /* Version 1.2 */ #define IOAT_VER_2_0 0x20 /* Version 2.0 */ #define IOAT_VER_3_0 0x30 /* Version 3.0 */ diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c index 90eddd9f07e4..51b2b643ba71 100644 --- a/drivers/dma/ioat/init.c +++ b/drivers/dma/ioat/init.c @@ -106,6 +106,8 @@ static struct pci_device_id ioat_pci_tbl[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BDX8) }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BDX9) }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_SKX) }, + /* I/OAT v3.3 platforms */ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BWD0) }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_BWD1) }, @@ -243,10 +245,15 @@ static bool is_bdx_ioat(struct pci_dev *pdev) } } +static inline bool is_skx_ioat(struct pci_dev *pdev) +{ + return (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_SKX) ? true : false; +} + static bool is_xeon_cb32(struct pci_dev *pdev) { return is_jf_ioat(pdev) || is_snb_ioat(pdev) || is_ivb_ioat(pdev) || - is_hsw_ioat(pdev) || is_bdx_ioat(pdev); + is_hsw_ioat(pdev) || is_bdx_ioat(pdev) || is_skx_ioat(pdev); } bool is_bwd_ioat(struct pci_dev *pdev) From 34a31f0af84158955a9747fb5c6712da5bbb5331 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 13 Dec 2016 11:15:27 -0700 Subject: [PATCH 055/645] dmaengine: ioatdma: workaround SKX ioatdma version The Skylake ioatdma is technically CBDMA 3.2+ and contains the same hardware bits with some additional 3.3 features, but it's not really 3.3 where the driver is concerned. Signed-off-by: Dave Jiang Signed-off-by: Vinod Koul --- drivers/dma/ioat/init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c index 51b2b643ba71..ace5cb2cb12f 100644 --- a/drivers/dma/ioat/init.c +++ b/drivers/dma/ioat/init.c @@ -1364,6 +1364,8 @@ static int ioat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) device->version = readb(device->reg_base + IOAT_VER_OFFSET); if (device->version >= IOAT_VER_3_0) { + if (is_skx_ioat(pdev)) + device->version = IOAT_VER_3_2; err = ioat3_dma_probe(device, ioat_dca_enabled); if (device->version >= IOAT_VER_3_3) From 1032471b3ec823bce7687034ac5af78a8ac99a9c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 15 Dec 2016 11:43:30 +0100 Subject: [PATCH 056/645] dmaengine: dw: fix typo in Kconfig platfroms -> platforms Signed-off-by: Jean Delvare Fixes: fed42c198b45 ("dma: dw: add PCI part of the driver") Cc: Viresh Kumar Acked-by: Andy Shevchenko Signed-off-by: Vinod Koul --- drivers/dma/dw/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig index e00c9b022964..5a37b9fcf40d 100644 --- a/drivers/dma/dw/Kconfig +++ b/drivers/dma/dw/Kconfig @@ -24,5 +24,5 @@ config DW_DMAC_PCI select DW_DMAC_CORE help Support the Synopsys DesignWare AHB DMA controller on the - platfroms that enumerate it as a PCI device. For example, + platforms that enumerate it as a PCI device. For example, Intel Medfield has integrated this GPDMA controller. From 7e96304d99477de1f70db42035071e56439da817 Mon Sep 17 00:00:00 2001 From: M'boumba Cedric Madianga Date: Tue, 13 Dec 2016 14:40:43 +0100 Subject: [PATCH 057/645] dmaengine: stm32-dma: Set correct args number for DMA request from DT This patch sets the right number of arguments to be used for DMA clients which request channels from DT. Signed-off-by: M'boumba Cedric Madianga Reviewed-by: Ludovic BARRE Signed-off-by: Vinod Koul --- drivers/dma/stm32-dma.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index 3688d0873a3e..a884b857cba4 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -972,21 +972,18 @@ static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec, struct stm32_dma_chan *chan; struct dma_chan *c; - if (dma_spec->args_count < 3) + if (dma_spec->args_count < 4) return NULL; cfg.channel_id = dma_spec->args[0]; cfg.request_line = dma_spec->args[1]; cfg.stream_config = dma_spec->args[2]; - cfg.threshold = 0; + cfg.threshold = dma_spec->args[3]; if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) || (cfg.request_line >= STM32_DMA_MAX_REQUEST_ID)) return NULL; - if (dma_spec->args_count > 3) - cfg.threshold = dma_spec->args[3]; - chan = &dmadev->chan[cfg.channel_id]; c = dma_get_slave_channel(&chan->vchan.chan); From 57b5a32135c813f2ab669039fb4ec16b30cb3305 Mon Sep 17 00:00:00 2001 From: M'boumba Cedric Madianga Date: Tue, 13 Dec 2016 14:40:46 +0100 Subject: [PATCH 058/645] dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status chan->desc is always set to NULL when a DMA transfer is complete. As a DMA transfer could be complete during the call of stm32_dma_tx_status, we need to be sure that chan->desc is not NULL before using this variable to avoid a null pointer deference issue. Signed-off-by: M'boumba Cedric Madianga Reviewed-by: Ludovic BARRE Signed-off-by: Vinod Koul --- drivers/dma/stm32-dma.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index a884b857cba4..3056ce7f8c69 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -880,7 +880,7 @@ static enum dma_status stm32_dma_tx_status(struct dma_chan *c, struct virt_dma_desc *vdesc; enum dma_status status; unsigned long flags; - u32 residue; + u32 residue = 0; status = dma_cookie_status(c, cookie, state); if ((status == DMA_COMPLETE) || (!state)) @@ -888,16 +888,12 @@ static enum dma_status stm32_dma_tx_status(struct dma_chan *c, spin_lock_irqsave(&chan->vchan.lock, flags); vdesc = vchan_find_desc(&chan->vchan, cookie); - if (cookie == chan->desc->vdesc.tx.cookie) { + if (chan->desc && cookie == chan->desc->vdesc.tx.cookie) residue = stm32_dma_desc_residue(chan, chan->desc, chan->next_sg); - } else if (vdesc) { + else if (vdesc) residue = stm32_dma_desc_residue(chan, to_stm32_dma_desc(vdesc), 0); - } else { - residue = 0; - } - dma_set_residue(state, residue); spin_unlock_irqrestore(&chan->vchan.lock, flags); From 75bdc7f31a3a6e9a12e218b31a44a1f54a91554c Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 19 Dec 2016 06:33:51 +0100 Subject: [PATCH 059/645] dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path. Add some missing 'of_node_put()' in early exit error path. Signed-off-by: Christophe JAILLET Signed-off-by: Vinod Koul --- drivers/dma/ti-dma-crossbar.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c index 3f24aeb48c0e..2403475a37cf 100644 --- a/drivers/dma/ti-dma-crossbar.c +++ b/drivers/dma/ti-dma-crossbar.c @@ -149,6 +149,7 @@ static int ti_am335x_xbar_probe(struct platform_device *pdev) match = of_match_node(ti_am335x_master_match, dma_node); if (!match) { dev_err(&pdev->dev, "DMA master is not supported\n"); + of_node_put(dma_node); return -EINVAL; } @@ -339,6 +340,7 @@ static int ti_dra7_xbar_probe(struct platform_device *pdev) match = of_match_node(ti_dra7_master_match, dma_node); if (!match) { dev_err(&pdev->dev, "DMA master is not supported\n"); + of_node_put(dma_node); return -EINVAL; } From 73529c872a189c747bdb528ce9b85b67b0e28dec Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 5 Dec 2016 22:14:36 +0100 Subject: [PATCH 060/645] mtd: nand: xway: disable module support The xway_nand driver accesses the ltq_ebu_membase symbol which is not exported. This also should not get exported and we should handle the EBU interface in a better way later. This quick fix just deactivated support for building as module. Fixes: 99f2b107924c ("mtd: lantiq: Add NAND support on Lantiq XWAY SoC.") Cc: Signed-off-by: Hauke Mehrtens Signed-off-by: Boris Brezillon --- drivers/mtd/nand/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 353a9ddf6b97..2f35ab5426f8 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -540,7 +540,7 @@ config MTD_NAND_FSMC Flexible Static Memory Controller (FSMC) config MTD_NAND_XWAY - tristate "Support for NAND on Lantiq XWAY SoC" + bool "Support for NAND on Lantiq XWAY SoC" depends on LANTIQ && SOC_TYPE_XWAY help Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached From a2724663494f7313f53da10d8c0a729c5e3c4dea Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 5 Dec 2016 22:14:37 +0100 Subject: [PATCH 061/645] mtd: nand: xway: fix build because of module functions Remove the usage of modules functions to make this driver compile again. Otherwise an include of linux/modules.h would be needed. Fixes: 024366750c2e ("mtd: nand: xway: convert to normal platform driver") Cc: Signed-off-by: Hauke Mehrtens Signed-off-by: Boris Brezillon --- drivers/mtd/nand/xway_nand.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c index 1f2948c0c458..895101a5e686 100644 --- a/drivers/mtd/nand/xway_nand.c +++ b/drivers/mtd/nand/xway_nand.c @@ -232,7 +232,6 @@ static const struct of_device_id xway_nand_match[] = { { .compatible = "lantiq,nand-xway" }, {}, }; -MODULE_DEVICE_TABLE(of, xway_nand_match); static struct platform_driver xway_nand_driver = { .probe = xway_nand_probe, @@ -243,6 +242,4 @@ static struct platform_driver xway_nand_driver = { }, }; -module_platform_driver(xway_nand_driver); - -MODULE_LICENSE("GPL"); +builtin_platform_driver(xway_nand_driver); From f0fcdc506b76e924c60fa607bba5872ca4745476 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 1 Jan 2017 18:58:27 -0800 Subject: [PATCH 062/645] mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM Fix build errors on arch/um, which does not support HAS_IOMEM, while the oxnas_nand.c driver uses interfaces that are supplied by HAS_IOMEM. (loadable module build:) ERROR: "devm_ioremap_resource" [drivers/mtd/nand/oxnas_nand.ko] undefined! or (built-in build:) drivers/built-in.o: In function `oxnas_nand_probe': drivers/mtd/nand/oxnas_nand.c:102: undefined reference to `devm_ioremap_resource' Fixes: 668592492409 ("mtd: nand: Add OX820 NAND Support") Signed-off-by: Randy Dunlap Reported-by: kbuild test robot Acked-by: Neil Armstrong Signed-off-by: Boris Brezillon --- drivers/mtd/nand/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 2f35ab5426f8..9ce5dcb4abd0 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -426,6 +426,7 @@ config MTD_NAND_ORION config MTD_NAND_OXNAS tristate "NAND Flash support for Oxford Semiconductor SoC" + depends on HAS_IOMEM help This enables the NAND flash controller on Oxford Semiconductor SoCs. From 4ea2a6be9565455f152c12f80222af1582ede0c7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 15 Nov 2016 14:53:13 +0100 Subject: [PATCH 063/645] ARM64: zynqmp: Fix W=1 dtc 1.4 warnings The patch removes these warnings reported by dtc 1.4: Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 2 +- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index 358089687a69..ef1b9e573af0 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -27,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 68a908334c7b..83791eadff41 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -72,7 +72,7 @@ <1 10 0xf08>; }; - amba_apu { + amba_apu: amba_apu@0 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <1>; From c415f9e8304a1d235ef118d912f374ee2e46c45d Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Thu, 22 Dec 2016 09:19:25 -0800 Subject: [PATCH 064/645] ARM64: zynqmp: Fix i2c node's compatible string MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Zynq Ultrascale MP uses version 1.4 of the Cadence IP core which fixes some silicon bugs that needed software workarounds in Version 1.0 that was used on Zynq systems. Signed-off-by: Moritz Fischer Cc: Michal Simek Cc: Sören Brinkmann Cc: Rob Herring Acked-by: Sören Brinkmann Signed-off-by: Michal Simek --- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 83791eadff41..54dc28351c8c 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -175,7 +175,7 @@ }; i2c0: i2c@ff020000 { - compatible = "cdns,i2c-r1p10"; + compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 17 4>; @@ -185,7 +185,7 @@ }; i2c1: i2c@ff030000 { - compatible = "cdns,i2c-r1p10"; + compatible = "cdns,i2c-r1p14", "cdns,i2c-r1p10"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 18 4>; From 1f2ed153b916c95a49a1ca9d7107738664224b7f Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Tue, 3 Jan 2017 00:20:49 +0900 Subject: [PATCH 065/645] perf probe: Fix to get correct modname from elf header Since 'perf probe' supports cross-arch probes, it is possible to analyze different arch kernel image which has different bits-per-long. In that case, it fails to get the module name because it uses the MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead of the target arch bits-per-long. This fixes above issue by changing modname-offset based on the target archs bit width. This is ok because linux kernel uses LP64 model on 64bit arch. E.g. without this (on x86_64, and target module is arm32): $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup p:probe/configfs_lookup :configfs_lookup+0 ^-Here is an empty module name. With this fix, you can see correct module name: $ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup p:probe/configfs_lookup configfs:configfs_lookup+0 Signed-off-by: Masami Hiramatsu Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-event.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index d281ae2b54e8..8f810961ec78 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -267,21 +267,6 @@ static bool kprobe_warn_out_range(const char *symbol, unsigned long address) return true; } -/* - * NOTE: - * '.gnu.linkonce.this_module' section of kernel module elf directly - * maps to 'struct module' from linux/module.h. This section contains - * actual module name which will be used by kernel after loading it. - * But, we cannot use 'struct module' here since linux/module.h is not - * exposed to user-space. Offset of 'name' has remained same from long - * time, so hardcoding it here. - */ -#ifdef __LP64__ -#define MOD_NAME_OFFSET 24 -#else -#define MOD_NAME_OFFSET 12 -#endif - /* * @module can be module name of module file path. In case of path, * inspect elf and find out what is actual module name. @@ -296,6 +281,7 @@ static char *find_module_name(const char *module) Elf_Data *data; Elf_Scn *sec; char *mod_name = NULL; + int name_offset; fd = open(module, O_RDONLY); if (fd < 0) @@ -317,7 +303,21 @@ static char *find_module_name(const char *module) if (!data || !data->d_buf) goto ret_err; - mod_name = strdup((char *)data->d_buf + MOD_NAME_OFFSET); + /* + * NOTE: + * '.gnu.linkonce.this_module' section of kernel module elf directly + * maps to 'struct module' from linux/module.h. This section contains + * actual module name which will be used by kernel after loading it. + * But, we cannot use 'struct module' here since linux/module.h is not + * exposed to user-space. Offset of 'name' has remained same from long + * time, so hardcoding it here. + */ + if (ehdr.e_ident[EI_CLASS] == ELFCLASS32) + name_offset = 12; + else /* expect ELFCLASS64 by default */ + name_offset = 24; + + mod_name = strdup((char *)data->d_buf + name_offset); ret_err: elf_end(elf); From 3ef01c968fbfb21c2f16281445d30a865ee4412c Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 29 Dec 2016 14:41:05 +0200 Subject: [PATCH 066/645] ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_* NF_CT_PROTO_DCCP/SCTP/UDPLITE were switched from tristate to boolean so defconfig needs to be adjusted to silence warnings: warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP warning: symbol value 'm' invalid for NF_CT_PROTO_SCTP warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE Signed-off-by: Krzysztof Kozlowski --- arch/arm/configs/s3c2410_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 4364040ed696..1e6c48dd7b11 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -86,9 +86,9 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y CONFIG_NF_CONNTRACK=m CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m From 836c3ce2566fb8c1754f8d7c9534cad9bc8a6879 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 2 Jan 2017 12:07:37 +0200 Subject: [PATCH 067/645] dmaengine: omap-dma: Fix dynamic lch_map allocation The original patch did not done what it was supposed to be doing and even worst it broke legacy boot (OMAP1). The lch_map size should be the number of available logical channels in sDMA and the od->dma_requests should store the number of available DMA request lines usable in sDMA. In legacy mode we do not have a way to get the DMA request count, in that case we use OMAP_SDMA_REQUESTS (127), despite the fact that OMAP1510 have only 31 DMA request line. Fixes: 2d1a9a946fae ("dmaengine: omap-dma: Dynamically allocate memory for lch_map") Reported-by: Aaro Koskinen Cc: stable@vger.kernel.org # v4.9 Signed-off-by: Peter Ujfalusi Tested-by: Aaro Koskinen Signed-off-by: Vinod Koul --- drivers/dma/omap-dma.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index ac68666cd3f4..4ad101a47e0a 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -1452,6 +1452,7 @@ static int omap_dma_probe(struct platform_device *pdev) struct omap_dmadev *od; struct resource *res; int rc, i, irq; + u32 lch_count; od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL); if (!od) @@ -1494,20 +1495,31 @@ static int omap_dma_probe(struct platform_device *pdev) spin_lock_init(&od->lock); spin_lock_init(&od->irq_lock); - if (!pdev->dev.of_node) { - od->dma_requests = od->plat->dma_attr->lch_count; - if (unlikely(!od->dma_requests)) - od->dma_requests = OMAP_SDMA_REQUESTS; - } else if (of_property_read_u32(pdev->dev.of_node, "dma-requests", - &od->dma_requests)) { + /* Number of DMA requests */ + od->dma_requests = OMAP_SDMA_REQUESTS; + if (pdev->dev.of_node && of_property_read_u32(pdev->dev.of_node, + "dma-requests", + &od->dma_requests)) { dev_info(&pdev->dev, "Missing dma-requests property, using %u.\n", OMAP_SDMA_REQUESTS); - od->dma_requests = OMAP_SDMA_REQUESTS; } - od->lch_map = devm_kcalloc(&pdev->dev, od->dma_requests, - sizeof(*od->lch_map), GFP_KERNEL); + /* Number of available logical channels */ + if (!pdev->dev.of_node) { + lch_count = od->plat->dma_attr->lch_count; + if (unlikely(!lch_count)) + lch_count = OMAP_SDMA_CHANNELS; + } else if (of_property_read_u32(pdev->dev.of_node, "dma-channels", + &lch_count)) { + dev_info(&pdev->dev, + "Missing dma-channels property, using %u.\n", + OMAP_SDMA_CHANNELS); + lch_count = OMAP_SDMA_CHANNELS; + } + + od->lch_map = devm_kcalloc(&pdev->dev, lch_count, sizeof(*od->lch_map), + GFP_KERNEL); if (!od->lch_map) return -ENOMEM; From f53243b563e8966fb5a5cd8f27d48b832d3b1c43 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 2 Jan 2017 17:42:08 +0100 Subject: [PATCH 068/645] MAINTAINERS: dmaengine: Update + Hand over the at_hdmac driver to Ludovic Hand over the Microchip / Atmel DMA driver handled by at_hdmac driver to Ludovic who is responsible for the newer at_xdmac driver as well. Also update the entry name and position to follow company changes. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- MAINTAINERS | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index cfff2c9e3d94..c10150853273 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2194,14 +2194,6 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported F: sound/soc/atmel -ATMEL DMA DRIVER -M: Nicolas Ferre -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Supported -F: drivers/dma/at_hdmac.c -F: drivers/dma/at_hdmac_regs.h -F: include/linux/platform_data/dma-atmel.h - ATMEL XDMA DRIVER M: Ludovic Desroches L: linux-arm-kernel@lists.infradead.org @@ -8174,6 +8166,15 @@ S: Maintained F: drivers/tty/serial/atmel_serial.c F: include/linux/atmel_serial.h +MICROCHIP / ATMEL DMA DRIVER +M: Ludovic Desroches +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: dmaengine@vger.kernel.org +S: Supported +F: drivers/dma/at_hdmac.c +F: drivers/dma/at_hdmac_regs.h +F: include/linux/platform_data/dma-atmel.h + MICROCHIP / ATMEL ISC DRIVER M: Songjun Wu L: linux-media@vger.kernel.org From 5c9e6c2b2ba3ec3a442e2fb5b4286498f8b4dcb7 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 16 Dec 2016 11:39:11 +0100 Subject: [PATCH 069/645] dmaengine: pl330: Fix runtime PM support for terminated transfers PL330 DMA engine driver is leaking a runtime reference after any terminated DMA transactions. This patch fixes this issue by tracking runtime PM state of the device and making additional call to pm_runtime_put() in terminate_all callback if needed. Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") Signed-off-by: Marek Szyprowski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 87fd01539fcb..740bbb942594 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -448,6 +448,9 @@ struct dma_pl330_chan { /* for cyclic capability */ bool cyclic; + + /* for runtime pm tracking */ + bool active; }; struct pl330_dmac { @@ -2033,6 +2036,7 @@ static void pl330_tasklet(unsigned long data) _stop(pch->thread); spin_unlock(&pch->thread->dmac->lock); power_down = true; + pch->active = false; } else { /* Make sure the PL330 Channel thread is active */ spin_lock(&pch->thread->dmac->lock); @@ -2052,6 +2056,7 @@ static void pl330_tasklet(unsigned long data) desc->status = PREP; list_move_tail(&desc->node, &pch->work_list); if (power_down) { + pch->active = true; spin_lock(&pch->thread->dmac->lock); _start(pch->thread); spin_unlock(&pch->thread->dmac->lock); @@ -2166,6 +2171,7 @@ static int pl330_terminate_all(struct dma_chan *chan) unsigned long flags; struct pl330_dmac *pl330 = pch->dmac; LIST_HEAD(list); + bool power_down = false; pm_runtime_get_sync(pl330->ddma.dev); spin_lock_irqsave(&pch->lock, flags); @@ -2176,6 +2182,8 @@ static int pl330_terminate_all(struct dma_chan *chan) pch->thread->req[0].desc = NULL; pch->thread->req[1].desc = NULL; pch->thread->req_running = -1; + power_down = pch->active; + pch->active = false; /* Mark all desc done */ list_for_each_entry(desc, &pch->submitted_list, node) { @@ -2193,6 +2201,8 @@ static int pl330_terminate_all(struct dma_chan *chan) list_splice_tail_init(&pch->completed_list, &pl330->desc_pool); spin_unlock_irqrestore(&pch->lock, flags); pm_runtime_mark_last_busy(pl330->ddma.dev); + if (power_down) + pm_runtime_put_autosuspend(pl330->ddma.dev); pm_runtime_put_autosuspend(pl330->ddma.dev); return 0; @@ -2357,6 +2367,7 @@ static void pl330_issue_pending(struct dma_chan *chan) * updated on work_list emptiness status. */ WARN_ON(list_empty(&pch->submitted_list)); + pch->active = true; pm_runtime_get_sync(pch->dmac->ddma.dev); } list_splice_tail_init(&pch->submitted_list, &pch->work_list); From 7165b8ad36f8bda42a5a8aa059b9a5071acc2210 Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Mon, 19 Dec 2016 15:30:12 +0100 Subject: [PATCH 070/645] mtd: nand: tango: Update DT binding description Visually separate register ranges (address/size pairs) in reg prop. Change DMA channel name, for consistency with other drivers. Signed-off-by: Marc Gonzalez Signed-off-by: Boris Brezillon --- Documentation/devicetree/bindings/mtd/tango-nand.txt | 6 +++--- drivers/mtd/nand/tango_nand.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt index ad5a02f2ac8c..cd1bf2ac9055 100644 --- a/Documentation/devicetree/bindings/mtd/tango-nand.txt +++ b/Documentation/devicetree/bindings/mtd/tango-nand.txt @@ -5,7 +5,7 @@ Required properties: - compatible: "sigma,smp8758-nand" - reg: address/size of nfc_reg, nfc_mem, and pbus_reg - dmas: reference to the DMA channel used by the controller -- dma-names: "nfc_sbox" +- dma-names: "rxtx" - clocks: reference to the system clock - #address-cells: <1> - #size-cells: <0> @@ -17,9 +17,9 @@ Example: nandc: nand-controller@2c000 { compatible = "sigma,smp8758-nand"; - reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>; + reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>; dmas = <&dma0 3>; - dma-names = "nfc_sbox"; + dma-names = "rxtx"; clocks = <&clkgen SYS_CLK>; #address-cells = <1>; #size-cells = <0>; diff --git a/drivers/mtd/nand/tango_nand.c b/drivers/mtd/nand/tango_nand.c index 28c7f474be77..78a65f672c87 100644 --- a/drivers/mtd/nand/tango_nand.c +++ b/drivers/mtd/nand/tango_nand.c @@ -636,7 +636,7 @@ static int tango_nand_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - nfc->chan = dma_request_chan(&pdev->dev, "nfc_sbox"); + nfc->chan = dma_request_chan(&pdev->dev, "rxtx"); if (IS_ERR(nfc->chan)) return PTR_ERR(nfc->chan); From dcafc45dcb6d8bb6d159ed0a903bd0f3de597fac Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 2 Jan 2017 16:09:59 +0100 Subject: [PATCH 071/645] drm/meson: Fix plane atomic check when no crtc for the plane When no CRTC is associated with the plane, the meson_plane_atomic_check() call breaks the kernel with an Oops. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Neil Armstrong --- drivers/gpu/drm/meson/meson_plane.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c index 4942ca090b46..7890e30eb584 100644 --- a/drivers/gpu/drm/meson/meson_plane.c +++ b/drivers/gpu/drm/meson/meson_plane.c @@ -51,6 +51,9 @@ static int meson_plane_atomic_check(struct drm_plane *plane, struct drm_crtc_state *crtc_state; struct drm_rect clip = { 0, }; + if (!state->crtc) + return 0; + crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc); if (IS_ERR(crtc_state)) return PTR_ERR(crtc_state); From 8043d25b3c0fa0a8f531333707f682f03b6febdb Mon Sep 17 00:00:00 2001 From: Marc Gonzalez Date: Tue, 3 Jan 2017 11:01:14 +0100 Subject: [PATCH 072/645] mtd: nand: tango: Reset pbus to raw mode in probe Linux should not expect the boot loader to properly configure the peripheral bus "pad mode", so reset PBUS_PAD_MODE to raw. Signed-off-by: Marc Gonzalez Signed-off-by: Boris Brezillon --- drivers/mtd/nand/tango_nand.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/nand/tango_nand.c b/drivers/mtd/nand/tango_nand.c index 78a65f672c87..4a5e948c62df 100644 --- a/drivers/mtd/nand/tango_nand.c +++ b/drivers/mtd/nand/tango_nand.c @@ -632,6 +632,8 @@ static int tango_nand_probe(struct platform_device *pdev) if (IS_ERR(nfc->pbus_base)) return PTR_ERR(nfc->pbus_base); + writel_relaxed(MODE_RAW, nfc->pbus_base + PBUS_PAD_MODE); + clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) return PTR_ERR(clk); From b66fb1da5a8cac3f5c3cdbe41937c91efc4e76a4 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 3 Jan 2017 09:19:54 +0100 Subject: [PATCH 073/645] tools lib subcmd: Add OPT_STRING_OPTARG_SET option To allow string options with a default argument and variable set when the option is used. Signed-off-by: Jiri Olsa Tested-by: Wang Nan Cc: David Ahern Cc: Josh Poimboeuf Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1483431600-19887-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/subcmd/parse-options.c | 3 +++ tools/lib/subcmd/parse-options.h | 5 +++++ 2 files changed, 8 insertions(+) diff --git a/tools/lib/subcmd/parse-options.c b/tools/lib/subcmd/parse-options.c index 3284bb14ae78..8aad81151d50 100644 --- a/tools/lib/subcmd/parse-options.c +++ b/tools/lib/subcmd/parse-options.c @@ -213,6 +213,9 @@ static int get_value(struct parse_opt_ctx_t *p, else err = get_arg(p, opt, flags, (const char **)opt->value); + if (opt->set) + *(bool *)opt->set = true; + /* PARSE_OPT_NOEMPTY: Allow NULL but disallow empty string. */ if (opt->flags & PARSE_OPT_NOEMPTY) { const char *val = *(const char **)opt->value; diff --git a/tools/lib/subcmd/parse-options.h b/tools/lib/subcmd/parse-options.h index 8866ac438b34..11c3be3bcce7 100644 --- a/tools/lib/subcmd/parse-options.h +++ b/tools/lib/subcmd/parse-options.h @@ -137,6 +137,11 @@ struct option { { .type = OPTION_STRING, .short_name = (s), .long_name = (l), \ .value = check_vtype(v, const char **), (a), .help = (h), \ .flags = PARSE_OPT_OPTARG, .defval = (intptr_t)(d) } +#define OPT_STRING_OPTARG_SET(s, l, v, os, a, h, d) \ + { .type = OPTION_STRING, .short_name = (s), .long_name = (l), \ + .value = check_vtype(v, const char **), (a), .help = (h), \ + .flags = PARSE_OPT_OPTARG, .defval = (intptr_t)(d), \ + .set = check_vtype(os, bool *)} #define OPT_STRING_NOEMPTY(s, l, v, a, h) { .type = OPTION_STRING, .short_name = (s), .long_name = (l), .value = check_vtype(v, const char **), (a), .help = (h), .flags = PARSE_OPT_NOEMPTY} #define OPT_DATE(s, l, v, h) \ { .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), .argh = "time", .help = (h), .callback = parse_opt_approxidate_cb } From efd21307119d5a23ac83ae8fd5a39a5c7aeb8493 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 3 Jan 2017 09:19:55 +0100 Subject: [PATCH 074/645] perf record: Make __record_options static There's no need for this one to be global. Signed-off-by: Jiri Olsa Tested-by: Wang Nan Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1483431600-19887-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 74d6a035133a..31cf0ce12a65 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -1405,7 +1405,7 @@ static bool dry_run; * perf_evlist__prepare_workload, etc instead of fork+exec'in 'perf record', * using pipes, etc. */ -struct option __record_options[] = { +static struct option __record_options[] = { OPT_CALLBACK('e', "event", &record.evlist, "event", "event selector. use 'perf list' to list available events", parse_events_option), From 60437ac02f398e0ee0927748d4798dd5534ac90d Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 3 Jan 2017 09:19:56 +0100 Subject: [PATCH 075/645] perf record: Fix --switch-output documentation and comment There's no --signal-trigger option, also adding the code comment into record man page. Signed-off-by: Jiri Olsa Tested-by: Wang Nan Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1483431600-19887-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf-record.txt | 4 ++++ tools/perf/builtin-record.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt index 27fc3617c6a4..5054d9147f0f 100644 --- a/tools/perf/Documentation/perf-record.txt +++ b/tools/perf/Documentation/perf-record.txt @@ -430,6 +430,10 @@ that gets then processed, possibly via a perf script, to decide if that particular perf.data snapshot should be kept or not. Implies --timestamp-filename, --no-buildid and --no-buildid-cache. +The reason for the latter two is to reduce the data file switching +overhead. You can still switch them on with: + + --switch-output --no-no-buildid --no-no-buildid-cache --dry-run:: Parse options then exit. --dry-run can be used to detect errors in cmdline diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 31cf0ce12a65..4ec10e9427d9 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -1636,7 +1636,7 @@ int cmd_record(int argc, const char **argv, const char *prefix __maybe_unused) * overhead. Still generate buildid if they are required * explicitly using * - * perf record --signal-trigger --no-no-buildid \ + * perf record --switch-output --no-no-buildid \ * --no-no-buildid-cache * * Following code equals to: From aa7c8da35d1905d80e840d075f07d26ec90144b5 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 20 Dec 2016 13:28:27 -0500 Subject: [PATCH 076/645] btrfs: fix error handling when run_delayed_extent_op fails In __btrfs_run_delayed_refs, the error path when run_delayed_extent_op fails sets locked_ref->processing = 0 but doesn't re-increment delayed_refs->num_heads_ready. As a result, we end up triggering the WARN_ON in btrfs_select_ref_head. Fixes: d7df2c796d7 (Btrfs: attach delayed ref updates to delayed ref heads) Reported-by: Jon Nelson Signed-off-by: Jeff Mahoney Reviewed-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index e97302f437a1..5366e50c84c6 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2572,7 +2572,10 @@ static noinline int __btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, */ if (must_insert_reserved) locked_ref->must_insert_reserved = 1; + spin_lock(&delayed_refs->lock); locked_ref->processing = 0; + delayed_refs->num_heads_ready++; + spin_unlock(&delayed_refs->lock); btrfs_debug(fs_info, "run_delayed_extent_op returned %d", ret); From d0280996437081dd12ed1e982ac8aeaa62835ec4 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 20 Dec 2016 13:28:28 -0500 Subject: [PATCH 077/645] btrfs: fix locking when we put back a delayed ref that's too new In __btrfs_run_delayed_refs, when we put back a delayed ref that's too new, we have already dropped the lock on locked_ref when we set ->processing = 0. This patch keeps the lock to cover that assignment. Fixes: d7df2c796d7 (Btrfs: attach delayed ref updates to delayed ref heads) Signed-off-by: Jeff Mahoney Reviewed-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 5366e50c84c6..ac7e6713033c 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2522,11 +2522,11 @@ static noinline int __btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, if (ref && ref->seq && btrfs_check_delayed_seq(fs_info, delayed_refs, ref->seq)) { spin_unlock(&locked_ref->lock); - btrfs_delayed_ref_unlock(locked_ref); spin_lock(&delayed_refs->lock); locked_ref->processing = 0; delayed_refs->num_heads_ready++; spin_unlock(&delayed_refs->lock); + btrfs_delayed_ref_unlock(locked_ref); locked_ref = NULL; cond_resched(); count++; From e321f8a801d7b4c40da8005257b05b9c2b51b072 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 30 Nov 2016 16:11:04 -0800 Subject: [PATCH 078/645] Btrfs: use down_read_nested to make lockdep silent If @block_group is not @used_bg, it'll try to get @used_bg's lock without droping @block_group 's lock and lockdep has throwed a scary deadlock warning about it. Fix it by using down_read_nested. Signed-off-by: Liu Bo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index ac7e6713033c..dcd2e798767e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -7387,7 +7387,8 @@ btrfs_lock_cluster(struct btrfs_block_group_cache *block_group, spin_unlock(&cluster->refill_lock); - down_read(&used_bg->data_rwsem); + /* We should only have one-level nested. */ + down_read_nested(&used_bg->data_rwsem, SINGLE_DEPTH_NESTING); spin_lock(&cluster->refill_lock); if (used_bg == cluster->block_group) From 781feef7e6befafd4d9787d1f7ada1f9ccd504e4 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 30 Nov 2016 16:20:25 -0800 Subject: [PATCH 079/645] Btrfs: fix lockdep warning about log_mutex While checking INODE_REF/INODE_EXTREF for a corner case, we may acquire a different inode's log_mutex with holding the current inode's log_mutex, and lockdep has complained this with a possilble deadlock warning. Fix this by using mutex_lock_nested() when processing the other inode's log_mutex. Reviewed-by: Filipe Manana Signed-off-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/tree-log.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index f10bf5213ed8..eeffff84f280 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -37,6 +37,7 @@ */ #define LOG_INODE_ALL 0 #define LOG_INODE_EXISTS 1 +#define LOG_OTHER_INODE 2 /* * directory trouble cases @@ -4641,7 +4642,7 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, if (S_ISDIR(inode->i_mode) || (!test_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &BTRFS_I(inode)->runtime_flags) && - inode_only == LOG_INODE_EXISTS)) + inode_only >= LOG_INODE_EXISTS)) max_key.type = BTRFS_XATTR_ITEM_KEY; else max_key.type = (u8)-1; @@ -4665,7 +4666,13 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, return ret; } - mutex_lock(&BTRFS_I(inode)->log_mutex); + if (inode_only == LOG_OTHER_INODE) { + inode_only = LOG_INODE_EXISTS; + mutex_lock_nested(&BTRFS_I(inode)->log_mutex, + SINGLE_DEPTH_NESTING); + } else { + mutex_lock(&BTRFS_I(inode)->log_mutex); + } /* * a brute force approach to making sure we get the most uptodate @@ -4817,7 +4824,7 @@ again: * unpin it. */ err = btrfs_log_inode(trans, root, other_inode, - LOG_INODE_EXISTS, + LOG_OTHER_INODE, 0, LLONG_MAX, ctx); iput(other_inode); if (err) From c2931667c83ded6504b3857e99cc45b21fa496fb Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Thu, 22 Dec 2016 17:13:54 -0800 Subject: [PATCH 080/645] Btrfs: adjust outstanding_extents counter properly when dio write is split Currently how btrfs dio deals with split dio write is not good enough if dio write is split into several segments due to the lack of contiguous space, a large dio write like 'dd bs=1G count=1' can end up with incorrect outstanding_extents counter and endio would complain loudly with an assertion. This fixes the problem by compensating the outstanding_extents counter in inode if a large dio write gets split. Reported-by: Anand Jain Tested-by: Anand Jain Signed-off-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/inode.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a713d9d324b0..81b9d9d0450c 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7623,11 +7623,18 @@ static void adjust_dio_outstanding_extents(struct inode *inode, * within our reservation, otherwise we need to adjust our inode * counter appropriately. */ - if (dio_data->outstanding_extents) { + if (dio_data->outstanding_extents >= num_extents) { dio_data->outstanding_extents -= num_extents; } else { + /* + * If dio write length has been split due to no large enough + * contiguous space, we need to compensate our inode counter + * appropriately. + */ + u64 num_needed = num_extents - dio_data->outstanding_extents; + spin_lock(&BTRFS_I(inode)->lock); - BTRFS_I(inode)->outstanding_extents += num_extents; + BTRFS_I(inode)->outstanding_extents += num_needed; spin_unlock(&BTRFS_I(inode)->lock); } } From 3b046a97cbd35a73e1eef968dbfb1a0aac745a77 Mon Sep 17 00:00:00 2001 From: Robert LeBlanc Date: Mon, 5 Dec 2016 13:02:57 -0700 Subject: [PATCH 081/645] md/raid1: Refactor raid1_make_request Refactor raid1_make_request to make read and write code in their own functions to clean up the code. Signed-off-by: Robert LeBlanc Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 267 +++++++++++++++++++++++---------------------- 1 file changed, 139 insertions(+), 128 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a1f3fbed9100..14422407e520 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1066,17 +1066,107 @@ static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule) kfree(plug); } -static void raid1_make_request(struct mddev *mddev, struct bio * bio) +static void raid1_read_request(struct mddev *mddev, struct bio *bio, + struct r1bio *r1_bio) { struct r1conf *conf = mddev->private; struct raid1_info *mirror; - struct r1bio *r1_bio; struct bio *read_bio; + struct bitmap *bitmap = mddev->bitmap; + const int op = bio_op(bio); + const unsigned long do_sync = (bio->bi_opf & REQ_SYNC); + int sectors_handled; + int max_sectors; + int rdisk; + + wait_barrier(conf, bio); + +read_again: + rdisk = read_balance(conf, r1_bio, &max_sectors); + + if (rdisk < 0) { + /* couldn't find anywhere to read from */ + raid_end_bio_io(r1_bio); + return; + } + mirror = conf->mirrors + rdisk; + + if (test_bit(WriteMostly, &mirror->rdev->flags) && + bitmap) { + /* + * Reading from a write-mostly device must take care not to + * over-take any writes that are 'behind' + */ + raid1_log(mddev, "wait behind writes"); + wait_event(bitmap->behind_wait, + atomic_read(&bitmap->behind_writes) == 0); + } + r1_bio->read_disk = rdisk; + r1_bio->start_next_window = 0; + + read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev); + bio_trim(read_bio, r1_bio->sector - bio->bi_iter.bi_sector, + max_sectors); + + r1_bio->bios[rdisk] = read_bio; + + read_bio->bi_iter.bi_sector = r1_bio->sector + + mirror->rdev->data_offset; + read_bio->bi_bdev = mirror->rdev->bdev; + read_bio->bi_end_io = raid1_end_read_request; + bio_set_op_attrs(read_bio, op, do_sync); + if (test_bit(FailFast, &mirror->rdev->flags) && + test_bit(R1BIO_FailFast, &r1_bio->state)) + read_bio->bi_opf |= MD_FAILFAST; + read_bio->bi_private = r1_bio; + + if (mddev->gendisk) + trace_block_bio_remap(bdev_get_queue(read_bio->bi_bdev), + read_bio, disk_devt(mddev->gendisk), + r1_bio->sector); + + if (max_sectors < r1_bio->sectors) { + /* + * could not read all from this device, so we will need another + * r1_bio. + */ + sectors_handled = (r1_bio->sector + max_sectors + - bio->bi_iter.bi_sector); + r1_bio->sectors = max_sectors; + spin_lock_irq(&conf->device_lock); + if (bio->bi_phys_segments == 0) + bio->bi_phys_segments = 2; + else + bio->bi_phys_segments++; + spin_unlock_irq(&conf->device_lock); + + /* + * Cannot call generic_make_request directly as that will be + * queued in __make_request and subsequent mempool_alloc might + * block waiting for it. So hand bio over to raid1d. + */ + reschedule_retry(r1_bio); + + r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO); + + r1_bio->master_bio = bio; + r1_bio->sectors = bio_sectors(bio) - sectors_handled; + r1_bio->state = 0; + r1_bio->mddev = mddev; + r1_bio->sector = bio->bi_iter.bi_sector + sectors_handled; + goto read_again; + } else + generic_make_request(read_bio); +} + +static void raid1_write_request(struct mddev *mddev, struct bio *bio, + struct r1bio *r1_bio) +{ + struct r1conf *conf = mddev->private; int i, disks; - struct bitmap *bitmap; + struct bitmap *bitmap = mddev->bitmap; unsigned long flags; const int op = bio_op(bio); - const int rw = bio_data_dir(bio); const unsigned long do_sync = (bio->bi_opf & REQ_SYNC); const unsigned long do_flush_fua = (bio->bi_opf & (REQ_PREFLUSH | REQ_FUA)); @@ -1096,15 +1186,15 @@ static void raid1_make_request(struct mddev *mddev, struct bio * bio) md_write_start(mddev, bio); /* wait on superblock update early */ - if (bio_data_dir(bio) == WRITE && - ((bio_end_sector(bio) > mddev->suspend_lo && + if ((bio_end_sector(bio) > mddev->suspend_lo && bio->bi_iter.bi_sector < mddev->suspend_hi) || (mddev_is_clustered(mddev) && md_cluster_ops->area_resyncing(mddev, WRITE, - bio->bi_iter.bi_sector, bio_end_sector(bio))))) { - /* As the suspend_* range is controlled by - * userspace, we want an interruptible - * wait. + bio->bi_iter.bi_sector, bio_end_sector(bio)))) { + + /* + * As the suspend_* range is controlled by userspace, we want + * an interruptible wait. */ DEFINE_WAIT(w); for (;;) { @@ -1115,128 +1205,15 @@ static void raid1_make_request(struct mddev *mddev, struct bio * bio) bio->bi_iter.bi_sector >= mddev->suspend_hi || (mddev_is_clustered(mddev) && !md_cluster_ops->area_resyncing(mddev, WRITE, - bio->bi_iter.bi_sector, bio_end_sector(bio)))) + bio->bi_iter.bi_sector, + bio_end_sector(bio)))) break; schedule(); } finish_wait(&conf->wait_barrier, &w); } - start_next_window = wait_barrier(conf, bio); - bitmap = mddev->bitmap; - - /* - * make_request() can abort the operation when read-ahead is being - * used and no empty request is available. - * - */ - r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO); - - r1_bio->master_bio = bio; - r1_bio->sectors = bio_sectors(bio); - r1_bio->state = 0; - r1_bio->mddev = mddev; - r1_bio->sector = bio->bi_iter.bi_sector; - - /* We might need to issue multiple reads to different - * devices if there are bad blocks around, so we keep - * track of the number of reads in bio->bi_phys_segments. - * If this is 0, there is only one r1_bio and no locking - * will be needed when requests complete. If it is - * non-zero, then it is the number of not-completed requests. - */ - bio->bi_phys_segments = 0; - bio_clear_flag(bio, BIO_SEG_VALID); - - if (rw == READ) { - /* - * read balancing logic: - */ - int rdisk; - -read_again: - rdisk = read_balance(conf, r1_bio, &max_sectors); - - if (rdisk < 0) { - /* couldn't find anywhere to read from */ - raid_end_bio_io(r1_bio); - return; - } - mirror = conf->mirrors + rdisk; - - if (test_bit(WriteMostly, &mirror->rdev->flags) && - bitmap) { - /* Reading from a write-mostly device must - * take care not to over-take any writes - * that are 'behind' - */ - raid1_log(mddev, "wait behind writes"); - wait_event(bitmap->behind_wait, - atomic_read(&bitmap->behind_writes) == 0); - } - r1_bio->read_disk = rdisk; - r1_bio->start_next_window = 0; - - read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev); - bio_trim(read_bio, r1_bio->sector - bio->bi_iter.bi_sector, - max_sectors); - - r1_bio->bios[rdisk] = read_bio; - - read_bio->bi_iter.bi_sector = r1_bio->sector + - mirror->rdev->data_offset; - read_bio->bi_bdev = mirror->rdev->bdev; - read_bio->bi_end_io = raid1_end_read_request; - bio_set_op_attrs(read_bio, op, do_sync); - if (test_bit(FailFast, &mirror->rdev->flags) && - test_bit(R1BIO_FailFast, &r1_bio->state)) - read_bio->bi_opf |= MD_FAILFAST; - read_bio->bi_private = r1_bio; - - if (mddev->gendisk) - trace_block_bio_remap(bdev_get_queue(read_bio->bi_bdev), - read_bio, disk_devt(mddev->gendisk), - r1_bio->sector); - - if (max_sectors < r1_bio->sectors) { - /* could not read all from this device, so we will - * need another r1_bio. - */ - - sectors_handled = (r1_bio->sector + max_sectors - - bio->bi_iter.bi_sector); - r1_bio->sectors = max_sectors; - spin_lock_irq(&conf->device_lock); - if (bio->bi_phys_segments == 0) - bio->bi_phys_segments = 2; - else - bio->bi_phys_segments++; - spin_unlock_irq(&conf->device_lock); - /* Cannot call generic_make_request directly - * as that will be queued in __make_request - * and subsequent mempool_alloc might block waiting - * for it. So hand bio over to raid1d. - */ - reschedule_retry(r1_bio); - - r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO); - - r1_bio->master_bio = bio; - r1_bio->sectors = bio_sectors(bio) - sectors_handled; - r1_bio->state = 0; - r1_bio->mddev = mddev; - r1_bio->sector = bio->bi_iter.bi_sector + - sectors_handled; - goto read_again; - } else - generic_make_request(read_bio); - return; - } - - /* - * WRITE: - */ if (conf->pending_count >= max_queued_requests) { md_wakeup_thread(mddev->thread); raid1_log(mddev, "wait queued"); @@ -1280,8 +1257,7 @@ read_again: int bad_sectors; int is_bad; - is_bad = is_badblock(rdev, r1_bio->sector, - max_sectors, + is_bad = is_badblock(rdev, r1_bio->sector, max_sectors, &first_bad, &bad_sectors); if (is_bad < 0) { /* mustn't write here until the bad block is @@ -1370,7 +1346,8 @@ read_again: continue; mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); - bio_trim(mbio, r1_bio->sector - bio->bi_iter.bi_sector, max_sectors); + bio_trim(mbio, r1_bio->sector - bio->bi_iter.bi_sector, + max_sectors); if (first_clone) { /* do behind I/O ? @@ -1464,6 +1441,40 @@ read_again: wake_up(&conf->wait_barrier); } +static void raid1_make_request(struct mddev *mddev, struct bio *bio) +{ + struct r1conf *conf = mddev->private; + struct r1bio *r1_bio; + + /* + * make_request() can abort the operation when read-ahead is being + * used and no empty request is available. + * + */ + r1_bio = mempool_alloc(conf->r1bio_pool, GFP_NOIO); + + r1_bio->master_bio = bio; + r1_bio->sectors = bio_sectors(bio); + r1_bio->state = 0; + r1_bio->mddev = mddev; + r1_bio->sector = bio->bi_iter.bi_sector; + + /* + * We might need to issue multiple reads to different devices if there + * are bad blocks around, so we keep track of the number of reads in + * bio->bi_phys_segments. If this is 0, there is only one r1_bio and + * no locking will be needed when requests complete. If it is + * non-zero, then it is the number of not-completed requests. + */ + bio->bi_phys_segments = 0; + bio_clear_flag(bio, BIO_SEG_VALID); + + if (bio_data_dir(bio) == READ) + raid1_read_request(mddev, bio, r1_bio); + else + raid1_write_request(mddev, bio, r1_bio); +} + static void raid1_status(struct seq_file *seq, struct mddev *mddev) { struct r1conf *conf = mddev->private; From bb5f1ed70bc3bbbce510907da3432dab267ff508 Mon Sep 17 00:00:00 2001 From: Robert LeBlanc Date: Mon, 5 Dec 2016 13:02:58 -0700 Subject: [PATCH 082/645] md/raid10: Refactor raid10_make_request Refactor raid10_make_request into seperate read and write functions to clean up the code. Shaohua: add the recovery check back to read path Signed-off-by: Robert LeBlanc Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 245 +++++++++++++++++++++++++------------------- 1 file changed, 140 insertions(+), 105 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index ab5e86209322..1920756828df 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1087,23 +1087,122 @@ static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule) kfree(plug); } -static void __make_request(struct mddev *mddev, struct bio *bio) +static void raid10_read_request(struct mddev *mddev, struct bio *bio, + struct r10bio *r10_bio) { struct r10conf *conf = mddev->private; - struct r10bio *r10_bio; struct bio *read_bio; + const int op = bio_op(bio); + const unsigned long do_sync = (bio->bi_opf & REQ_SYNC); + int sectors_handled; + int max_sectors; + sector_t sectors; + struct md_rdev *rdev; + int slot; + + /* + * Register the new request and wait if the reconstruction + * thread has put up a bar for new requests. + * Continue immediately if no resync is active currently. + */ + wait_barrier(conf); + + sectors = bio_sectors(bio); + while (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && + bio->bi_iter.bi_sector < conf->reshape_progress && + bio->bi_iter.bi_sector + sectors > conf->reshape_progress) { + /* + * IO spans the reshape position. Need to wait for reshape to + * pass + */ + raid10_log(conf->mddev, "wait reshape"); + allow_barrier(conf); + wait_event(conf->wait_barrier, + conf->reshape_progress <= bio->bi_iter.bi_sector || + conf->reshape_progress >= bio->bi_iter.bi_sector + + sectors); + wait_barrier(conf); + } + +read_again: + rdev = read_balance(conf, r10_bio, &max_sectors); + if (!rdev) { + raid_end_bio_io(r10_bio); + return; + } + slot = r10_bio->read_slot; + + read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev); + bio_trim(read_bio, r10_bio->sector - bio->bi_iter.bi_sector, + max_sectors); + + r10_bio->devs[slot].bio = read_bio; + r10_bio->devs[slot].rdev = rdev; + + read_bio->bi_iter.bi_sector = r10_bio->devs[slot].addr + + choose_data_offset(r10_bio, rdev); + read_bio->bi_bdev = rdev->bdev; + read_bio->bi_end_io = raid10_end_read_request; + bio_set_op_attrs(read_bio, op, do_sync); + if (test_bit(FailFast, &rdev->flags) && + test_bit(R10BIO_FailFast, &r10_bio->state)) + read_bio->bi_opf |= MD_FAILFAST; + read_bio->bi_private = r10_bio; + + if (mddev->gendisk) + trace_block_bio_remap(bdev_get_queue(read_bio->bi_bdev), + read_bio, disk_devt(mddev->gendisk), + r10_bio->sector); + if (max_sectors < r10_bio->sectors) { + /* + * Could not read all from this device, so we will need another + * r10_bio. + */ + sectors_handled = (r10_bio->sector + max_sectors + - bio->bi_iter.bi_sector); + r10_bio->sectors = max_sectors; + spin_lock_irq(&conf->device_lock); + if (bio->bi_phys_segments == 0) + bio->bi_phys_segments = 2; + else + bio->bi_phys_segments++; + spin_unlock_irq(&conf->device_lock); + /* + * Cannot call generic_make_request directly as that will be + * queued in __generic_make_request and subsequent + * mempool_alloc might block waiting for it. so hand bio over + * to raid10d. + */ + reschedule_retry(r10_bio); + + r10_bio = mempool_alloc(conf->r10bio_pool, GFP_NOIO); + + r10_bio->master_bio = bio; + r10_bio->sectors = bio_sectors(bio) - sectors_handled; + r10_bio->state = 0; + r10_bio->mddev = mddev; + r10_bio->sector = bio->bi_iter.bi_sector + sectors_handled; + goto read_again; + } else + generic_make_request(read_bio); + return; +} + +static void raid10_write_request(struct mddev *mddev, struct bio *bio, + struct r10bio *r10_bio) +{ + struct r10conf *conf = mddev->private; int i; const int op = bio_op(bio); - const int rw = bio_data_dir(bio); const unsigned long do_sync = (bio->bi_opf & REQ_SYNC); const unsigned long do_fua = (bio->bi_opf & REQ_FUA); unsigned long flags; struct md_rdev *blocked_rdev; struct blk_plug_cb *cb; struct raid10_plug_cb *plug = NULL; + sector_t sectors; int sectors_handled; int max_sectors; - int sectors; md_write_start(mddev, bio); @@ -1118,8 +1217,9 @@ static void __make_request(struct mddev *mddev, struct bio *bio) while (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && bio->bi_iter.bi_sector < conf->reshape_progress && bio->bi_iter.bi_sector + sectors > conf->reshape_progress) { - /* IO spans the reshape position. Need to wait for - * reshape to pass + /* + * IO spans the reshape position. Need to wait for reshape to + * pass */ raid10_log(conf->mddev, "wait reshape"); allow_barrier(conf); @@ -1129,8 +1229,8 @@ static void __make_request(struct mddev *mddev, struct bio *bio) sectors); wait_barrier(conf); } + if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && - bio_data_dir(bio) == WRITE && (mddev->reshape_backwards ? (bio->bi_iter.bi_sector < conf->reshape_safe && bio->bi_iter.bi_sector + sectors > conf->reshape_progress) @@ -1148,98 +1248,6 @@ static void __make_request(struct mddev *mddev, struct bio *bio) conf->reshape_safe = mddev->reshape_position; } - r10_bio = mempool_alloc(conf->r10bio_pool, GFP_NOIO); - - r10_bio->master_bio = bio; - r10_bio->sectors = sectors; - - r10_bio->mddev = mddev; - r10_bio->sector = bio->bi_iter.bi_sector; - r10_bio->state = 0; - - /* We might need to issue multiple reads to different - * devices if there are bad blocks around, so we keep - * track of the number of reads in bio->bi_phys_segments. - * If this is 0, there is only one r10_bio and no locking - * will be needed when the request completes. If it is - * non-zero, then it is the number of not-completed requests. - */ - bio->bi_phys_segments = 0; - bio_clear_flag(bio, BIO_SEG_VALID); - - if (rw == READ) { - /* - * read balancing logic: - */ - struct md_rdev *rdev; - int slot; - -read_again: - rdev = read_balance(conf, r10_bio, &max_sectors); - if (!rdev) { - raid_end_bio_io(r10_bio); - return; - } - slot = r10_bio->read_slot; - - read_bio = bio_clone_mddev(bio, GFP_NOIO, mddev); - bio_trim(read_bio, r10_bio->sector - bio->bi_iter.bi_sector, - max_sectors); - - r10_bio->devs[slot].bio = read_bio; - r10_bio->devs[slot].rdev = rdev; - - read_bio->bi_iter.bi_sector = r10_bio->devs[slot].addr + - choose_data_offset(r10_bio, rdev); - read_bio->bi_bdev = rdev->bdev; - read_bio->bi_end_io = raid10_end_read_request; - bio_set_op_attrs(read_bio, op, do_sync); - if (test_bit(FailFast, &rdev->flags) && - test_bit(R10BIO_FailFast, &r10_bio->state)) - read_bio->bi_opf |= MD_FAILFAST; - read_bio->bi_private = r10_bio; - - if (mddev->gendisk) - trace_block_bio_remap(bdev_get_queue(read_bio->bi_bdev), - read_bio, disk_devt(mddev->gendisk), - r10_bio->sector); - if (max_sectors < r10_bio->sectors) { - /* Could not read all from this device, so we will - * need another r10_bio. - */ - sectors_handled = (r10_bio->sector + max_sectors - - bio->bi_iter.bi_sector); - r10_bio->sectors = max_sectors; - spin_lock_irq(&conf->device_lock); - if (bio->bi_phys_segments == 0) - bio->bi_phys_segments = 2; - else - bio->bi_phys_segments++; - spin_unlock_irq(&conf->device_lock); - /* Cannot call generic_make_request directly - * as that will be queued in __generic_make_request - * and subsequent mempool_alloc might block - * waiting for it. so hand bio over to raid10d. - */ - reschedule_retry(r10_bio); - - r10_bio = mempool_alloc(conf->r10bio_pool, GFP_NOIO); - - r10_bio->master_bio = bio; - r10_bio->sectors = bio_sectors(bio) - sectors_handled; - r10_bio->state = 0; - r10_bio->mddev = mddev; - r10_bio->sector = bio->bi_iter.bi_sector + - sectors_handled; - goto read_again; - } else - generic_make_request(read_bio); - return; - } - - /* - * WRITE: - */ if (conf->pending_count >= max_queued_requests) { md_wakeup_thread(mddev->thread); raid10_log(mddev, "wait queued"); @@ -1300,8 +1308,7 @@ retry_write: int bad_sectors; int is_bad; - is_bad = is_badblock(rdev, dev_sector, - max_sectors, + is_bad = is_badblock(rdev, dev_sector, max_sectors, &first_bad, &bad_sectors); if (is_bad < 0) { /* Mustn't write here until the bad block @@ -1405,8 +1412,7 @@ retry_write: r10_bio->devs[i].bio = mbio; mbio->bi_iter.bi_sector = (r10_bio->devs[i].addr+ - choose_data_offset(r10_bio, - rdev)); + choose_data_offset(r10_bio, rdev)); mbio->bi_bdev = rdev->bdev; mbio->bi_end_io = raid10_end_write_request; bio_set_op_attrs(mbio, op, do_sync | do_fua); @@ -1457,8 +1463,7 @@ retry_write: r10_bio->devs[i].repl_bio = mbio; mbio->bi_iter.bi_sector = (r10_bio->devs[i].addr + - choose_data_offset( - r10_bio, rdev)); + choose_data_offset(r10_bio, rdev)); mbio->bi_bdev = rdev->bdev; mbio->bi_end_io = raid10_end_write_request; bio_set_op_attrs(mbio, op, do_sync | do_fua); @@ -1503,6 +1508,36 @@ retry_write: one_write_done(r10_bio); } +static void __make_request(struct mddev *mddev, struct bio *bio) +{ + struct r10conf *conf = mddev->private; + struct r10bio *r10_bio; + + r10_bio = mempool_alloc(conf->r10bio_pool, GFP_NOIO); + + r10_bio->master_bio = bio; + r10_bio->sectors = bio_sectors(bio); + + r10_bio->mddev = mddev; + r10_bio->sector = bio->bi_iter.bi_sector; + r10_bio->state = 0; + + /* + * We might need to issue multiple reads to different devices if there + * are bad blocks around, so we keep track of the number of reads in + * bio->bi_phys_segments. If this is 0, there is only one r10_bio and + * no locking will be needed when the request completes. If it is + * non-zero, then it is the number of not-completed requests. + */ + bio->bi_phys_segments = 0; + bio_clear_flag(bio, BIO_SEG_VALID); + + if (bio_data_dir(bio) == READ) + raid10_read_request(mddev, bio, r10_bio); + else + raid10_write_request(mddev, bio, r10_bio); +} + static void raid10_make_request(struct mddev *mddev, struct bio *bio) { struct r10conf *conf = mddev->private; From 074859184d770824f4437dca716bdeb625ae8b1c Mon Sep 17 00:00:00 2001 From: Daniel Bristot de Oliveira Date: Tue, 3 Jan 2017 12:42:42 +0100 Subject: [PATCH 083/645] tools lib traceevent: Fix prev/next_prio for deadline tasks Currently, the sched:sched_switch tracepoint reports deadline tasks with priority -1. But when reading the trace via perf script I've got the following output: # ./d & # (d is a deadline task, see [1]) # perf record -e sched:sched_switch -a sleep 1 # perf script ... swapper 0 [000] 2146.962441: sched:sched_switch: swapper/0:0 [120] R ==> d:2593 [4294967295] d 2593 [000] 2146.972472: sched:sched_switch: d:2593 [4294967295] R ==> g:2590 [4294967295] The task d reports the wrong priority [4294967295]. This happens because the "int prio" is stored in an unsigned long long val. Although it is set as a %lld, as int is shorter than unsigned long long, trace_seq_printf prints it as a positive number. The fix is just to cast the val as an int, and print it as a %d, as in the sched:sched_switch tracepoint's "format". The output with the fix is: # ./d & # perf record -e sched:sched_switch -a sleep 1 # perf script ... swapper 0 [000] 4306.374037: sched:sched_switch: swapper/0:0 [120] R ==> d:10941 [-1] d 10941 [000] 4306.383823: sched:sched_switch: d:10941 [-1] R ==> swapper/0:0 [120] [1] d.c --- #include #include #include #include #include struct sched_attr { __u32 size, sched_policy; __u64 sched_flags; __s32 sched_nice; __u32 sched_priority; __u64 sched_runtime, sched_deadline, sched_period; }; int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags) { return syscall(__NR_sched_setattr, pid, attr, flags); } int main(void) { struct sched_attr attr = { .size = sizeof(attr), .sched_policy = SCHED_DEADLINE, /* This creates a 10ms/30ms reservation */ .sched_runtime = 10 * 1000 * 1000, .sched_period = attr.sched_deadline = 30 * 1000 * 1000, }; if (sched_setattr(0, &attr, 0) < 0) { perror("sched_setattr"); return -1; } for(;;); } --- Committer notes: Got the program from the provided URL, http://bristot.me/lkml/d.c, trimmed it and included in the cset log above, so that we have everything needed to test it in one place. Signed-off-by: Daniel Bristot de Oliveira Acked-by: Steven Rostedt Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Daniel Bristot de Oliveira Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/866ef75bcebf670ae91c6a96daa63597ba981f0d.1483443552.git.bristot@redhat.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/plugin_sched_switch.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/lib/traceevent/plugin_sched_switch.c b/tools/lib/traceevent/plugin_sched_switch.c index f1ce60065258..ec30c2fcbac0 100644 --- a/tools/lib/traceevent/plugin_sched_switch.c +++ b/tools/lib/traceevent/plugin_sched_switch.c @@ -111,7 +111,7 @@ static int sched_switch_handler(struct trace_seq *s, trace_seq_printf(s, "%lld ", val); if (pevent_get_field_val(s, event, "prev_prio", record, &val, 0) == 0) - trace_seq_printf(s, "[%lld] ", val); + trace_seq_printf(s, "[%d] ", (int) val); if (pevent_get_field_val(s, event, "prev_state", record, &val, 0) == 0) write_state(s, val); @@ -129,7 +129,7 @@ static int sched_switch_handler(struct trace_seq *s, trace_seq_printf(s, "%lld", val); if (pevent_get_field_val(s, event, "next_prio", record, &val, 0) == 0) - trace_seq_printf(s, " [%lld]", val); + trace_seq_printf(s, " [%d]", (int) val); return 0; } From 30a9c6444810429aa2b7cbfbd453ce339baaadbf Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 3 Jan 2017 12:03:59 -0300 Subject: [PATCH 084/645] perf tools: Install tools/lib/traceevent plugins with install-bin Those are binaries as well, so should be installed by: make -C tools/perf install-bin' too. Cc: Alexander Shishkin Cc: Daniel Bristot de Oliveira Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/n/tip-3841b37u05evxrs1igkyu6ks@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.perf | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index e9ec531131ca..4db68aec9913 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -704,9 +704,9 @@ install-tests: all install-gtk $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'; \ $(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr' -install-bin: install-tools install-tests +install-bin: install-tools install-tests install-traceevent-plugins -install: install-bin try-install-man install-traceevent-plugins +install: install-bin try-install-man install-python_ext: $(PYTHON_WORD) util/setup.py --quiet install --root='/$(DESTDIR_SQ)' From 7934c98a6e04028eb34c1293bfb5a6b0ab630b66 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 3 Jan 2017 15:19:21 -0300 Subject: [PATCH 085/645] perf symbols: Robustify reading of build-id from sysfs Markus reported that perf segfaults when reading /sys/kernel/notes from a kernel linked with GNU gold, due to what looks like a gold bug, so do some bounds checking to avoid crashing in that case. Reported-by: Markus Trippelsdorf Report-Link: http://lkml.kernel.org/r/20161219161821.GA294@x4 Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-ryhgs6a6jxvz207j2636w31c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol-elf.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index 99400b0e8f2a..adbc6c02c3aa 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -537,6 +537,12 @@ int sysfs__read_build_id(const char *filename, void *build_id, size_t size) break; } else { int n = namesz + descsz; + + if (n > (int)sizeof(bf)) { + n = sizeof(bf); + pr_debug("%s: truncating reading of build id in sysfs file %s: n_namesz=%u, n_descsz=%u.\n", + __func__, filename, nhdr.n_namesz, nhdr.n_descsz); + } if (read(fd, bf, n) != n) break; } From 47e3a5edc6538d66e470aaed3b7c57255cb37ca1 Mon Sep 17 00:00:00 2001 From: Paul Donohue Date: Tue, 3 Jan 2017 10:39:28 -0800 Subject: [PATCH 086/645] Input: ALPS - fix TrackStick Y axis handling for SS5 hardware A minus character was lost in commit 23fce365, causing the Y axis to be inverted for SS5 TrackStick events. (Pushing the TrackStick up caused the pointer to move down, and vice versa.) Restore the lost minus. Fixes: 23fce365c6a2 ("Input: ALPS - clean up code for SS5 hardware") Signed-off-by: Paul Donohue Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index cde6f4bd8ea2..6d279aa27cb9 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -114,7 +114,7 @@ enum SS4_PACKET_ID { (_b[1] & 0x7F) \ ) -#define SS4_TS_Y_V2(_b) (s8)( \ +#define SS4_TS_Y_V2(_b) -(s8)( \ ((_b[3] & 0x01) << 7) | \ (_b[2] & 0x7F) \ ) From 01427fe7c4b956b878e55e966690624a3624e991 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 3 Jan 2017 11:51:48 -0800 Subject: [PATCH 087/645] Input: adxl34x - make it enumerable in ACPI environment The ACPI-enabled platform may contain _DSD method to enable this driver using compatible string. Remove OF specifics to re-use existing code on ACPI-enabled platforms. Suggested-by: Mika Westerberg Signed-off-by: Andy Shevchenko Signed-off-by: Dmitry Torokhov --- drivers/input/misc/adxl34x-i2c.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c index a8b0a2eec344..7fed92fb8cc1 100644 --- a/drivers/input/misc/adxl34x-i2c.c +++ b/drivers/input/misc/adxl34x-i2c.c @@ -136,7 +136,6 @@ static const struct i2c_device_id adxl34x_id[] = { MODULE_DEVICE_TABLE(i2c, adxl34x_id); -#ifdef CONFIG_OF static const struct of_device_id adxl34x_of_id[] = { /* * The ADXL346 is backward-compatible with the ADXL345. Differences are @@ -153,13 +152,12 @@ static const struct of_device_id adxl34x_of_id[] = { }; MODULE_DEVICE_TABLE(of, adxl34x_of_id); -#endif static struct i2c_driver adxl34x_driver = { .driver = { .name = "adxl34x", .pm = &adxl34x_i2c_pm, - .of_match_table = of_match_ptr(adxl34x_of_id), + .of_match_table = adxl34x_of_id, }, .probe = adxl34x_i2c_probe, .remove = adxl34x_i2c_remove, From 7611fb68062f8d7f416f3272894d1edf7bbff29c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 27 Dec 2016 15:31:49 -0200 Subject: [PATCH 088/645] thermal: thermal_hwmon: Convert to hwmon_device_register_with_info() Booting Linux on a mx6q based board leads to the following warning: (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). ,so do as suggested. Also, this results in the core taking care of creating the 'name' attribute, so drop the code doing that from the thermal driver. Suggested-by: Guenter Roeck Signed-off-by: Fabio Estevam Signed-off-by: Zhang Rui --- drivers/thermal/thermal_hwmon.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c index 541af5946203..c4a508a124dc 100644 --- a/drivers/thermal/thermal_hwmon.c +++ b/drivers/thermal/thermal_hwmon.c @@ -58,14 +58,6 @@ static LIST_HEAD(thermal_hwmon_list); static DEFINE_MUTEX(thermal_hwmon_list_lock); -static ssize_t -name_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev); - return sprintf(buf, "%s\n", hwmon->type); -} -static DEVICE_ATTR_RO(name); - static ssize_t temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -165,15 +157,12 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) INIT_LIST_HEAD(&hwmon->tz_list); strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH); - hwmon->device = hwmon_device_register(NULL); + hwmon->device = hwmon_device_register_with_info(NULL, hwmon->type, + hwmon, NULL, NULL); if (IS_ERR(hwmon->device)) { result = PTR_ERR(hwmon->device); goto free_mem; } - dev_set_drvdata(hwmon->device, hwmon); - result = device_create_file(hwmon->device, &dev_attr_name); - if (result) - goto free_mem; register_sys_interface: temp = kzalloc(sizeof(*temp), GFP_KERNEL); @@ -222,10 +211,8 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) free_temp_mem: kfree(temp); unregister_name: - if (new_hwmon_device) { - device_remove_file(hwmon->device, &dev_attr_name); + if (new_hwmon_device) hwmon_device_unregister(hwmon->device); - } free_mem: if (new_hwmon_device) kfree(hwmon); @@ -267,7 +254,6 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) list_del(&hwmon->node); mutex_unlock(&thermal_hwmon_list_lock); - device_remove_file(hwmon->device, &dev_attr_name); hwmon_device_unregister(hwmon->device); kfree(hwmon); } From f97fd383d9a10fd125bcdafba03240685aed5608 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 19 Dec 2016 15:47:14 +0100 Subject: [PATCH 089/645] drm: tilcdc: simplify the recovery from sync lost error on rev1 Revision 2 of LCDC suffers from an issue where a SYNC_LOST error caused by limited memory bandwidth may leave the picture shifted a couple pixels to the right. This issue has not been observed on revision 1, while the recovery mechanism introduces a different issue, where the END_OF_FRAME interrupt doesn't fire while drm is waiting for vblanks. On rev1: recover from sync lost errors by simply clearing the RASTER_ENABLE bit in the RASTER_CTRL register and re-enabling it again as is suggested by the datasheet. Signed-off-by: Bartosz Golaszewski Reviewed-by: Jyri Sarha Signed-off-by: Jyri Sarha --- drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 9942b0577d6e..20041073e46d 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -856,7 +856,7 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); struct drm_device *dev = crtc->dev; struct tilcdc_drm_private *priv = dev->dev_private; - uint32_t stat; + uint32_t stat, reg; stat = tilcdc_read_irqstatus(dev); tilcdc_clear_irqstatus(dev, stat); @@ -921,17 +921,26 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost", __func__, stat); tilcdc_crtc->frame_intact = false; - if (tilcdc_crtc->sync_lost_count++ > - SYNC_LOST_COUNT_LIMIT) { - dev_err(dev->dev, "%s(0x%08x): Sync lost flood detected, recovering", __func__, stat); - queue_work(system_wq, &tilcdc_crtc->recover_work); - if (priv->rev == 1) + if (priv->rev == 1) { + reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG); + if (reg & LCDC_RASTER_ENABLE) { tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, - LCDC_V1_SYNC_LOST_INT_ENA); - else + LCDC_RASTER_ENABLE); + tilcdc_set(dev, LCDC_RASTER_CTRL_REG, + LCDC_RASTER_ENABLE); + } + } else { + if (tilcdc_crtc->sync_lost_count++ > + SYNC_LOST_COUNT_LIMIT) { + dev_err(dev->dev, + "%s(0x%08x): Sync lost flood detected, recovering", + __func__, stat); + queue_work(system_wq, + &tilcdc_crtc->recover_work); tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG, LCDC_SYNC_LOST); - tilcdc_crtc->sync_lost_count = 0; + tilcdc_crtc->sync_lost_count = 0; + } } } From aebe55c2d4b998741c0847ace1b4af47d73c763b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 3 Jan 2017 01:14:27 +0200 Subject: [PATCH 090/645] drm: Clean up planes in atomic commit helper failure path If waiting for fences fails for blocking commits, planes must be cleaned up before returning. Cc: stable@vger.kernel.org Fixes: f6ce410a59a4 ("drm/fence: allow fence waiting to be interrupted by userspace") Signed-off-by: Laurent Pinchart Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170102231427.7192-1-laurent.pinchart@ideasonboard.com --- drivers/gpu/drm/drm_atomic_helper.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 583f47f27b36..34f757bcabae 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1259,8 +1259,10 @@ int drm_atomic_helper_commit(struct drm_device *dev, if (!nonblock) { ret = drm_atomic_helper_wait_for_fences(dev, state, true); - if (ret) + if (ret) { + drm_atomic_helper_cleanup_planes(dev, state); return ret; + } } /* From 0c931a290cc0377c99a8cd970a49e736dbb23e0e Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 2 Jan 2017 16:14:15 +0100 Subject: [PATCH 091/645] drm/meson: Fix CVBS initialization when HDMI is configured by bootloader When the HDMI output is configured by the bootloader, there is mismatch is the pipeline configuration and the Vsync interrupt fails to trigger. This commit disables the HDMI blocks in the probe phase. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Neil Armstrong --- drivers/gpu/drm/meson/meson_venc.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c index d836b2274531..f7c870172220 100644 --- a/drivers/gpu/drm/meson/meson_venc.c +++ b/drivers/gpu/drm/meson/meson_venc.c @@ -38,6 +38,11 @@ * - TV Panel encoding via ENCT */ +/* HHI Registers */ +#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */ +#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */ +#define HHI_HDMI_PHY_CNTL0 0x3a0 /* 0xe8 offset in data sheet */ + struct meson_cvbs_enci_mode meson_cvbs_enci_pal = { .mode_tag = MESON_VENC_MODE_CVBS_PAL, .hso_begin = 3, @@ -242,6 +247,20 @@ void meson_venc_disable_vsync(struct meson_drm *priv) void meson_venc_init(struct meson_drm *priv) { + /* Disable CVBS VDAC */ + regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0); + regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8); + + /* Power Down Dacs */ + writel_relaxed(0xff, priv->io_base + _REG(VENC_VDAC_SETTING)); + + /* Disable HDMI PHY */ + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0); + + /* Disable HDMI */ + writel_bits_relaxed(0x3, 0, + priv->io_base + _REG(VPU_HDMI_SETTING)); + /* Disable all encoders */ writel_relaxed(0, priv->io_base + _REG(ENCI_VIDEO_EN)); writel_relaxed(0, priv->io_base + _REG(ENCP_VIDEO_EN)); From 5db60ea93d4fbf146c8f7ca286b8b2a091761460 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 4 Jan 2017 10:51:02 +0100 Subject: [PATCH 092/645] drm/meson: Fix CVBS VDAC disable This commit fixes the VDAC disabling register write values. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Neil Armstrong --- drivers/gpu/drm/meson/meson_venc_cvbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c index c809c085fd78..a2bcc70a03ef 100644 --- a/drivers/gpu/drm/meson/meson_venc_cvbs.c +++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c @@ -167,7 +167,7 @@ static void meson_venc_cvbs_encoder_disable(struct drm_encoder *encoder) /* Disable CVBS VDAC */ regmap_write(priv->hhi, HHI_VDAC_CNTL0, 0); - regmap_write(priv->hhi, HHI_VDAC_CNTL1, 0); + regmap_write(priv->hhi, HHI_VDAC_CNTL1, 8); } static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder) From cf1716e9dae5b21b9bbcfe5eb0106c3b0aee37e8 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 3 Jan 2017 15:48:20 +0200 Subject: [PATCH 093/645] spi: dw-mid: switch to new dmaengine_terminate_* API (part 2) The commit a3ff9582369e ("spi: dw-mid: switch to new dmaengine_terminate_* API") converted mid_spi_dma_exit() but missed mid_spi_dma_stop(). This is follow up to convert the rest. Fixes: a3ff9582369e ("spi: dw-mid: switch to new dmaengine_terminate_* API") Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index e31971f91475..837cb8d0bac6 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -274,11 +274,11 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer) static void mid_spi_dma_stop(struct dw_spi *dws) { if (test_bit(TX_BUSY, &dws->dma_chan_busy)) { - dmaengine_terminate_all(dws->txchan); + dmaengine_terminate_sync(dws->txchan); clear_bit(TX_BUSY, &dws->dma_chan_busy); } if (test_bit(RX_BUSY, &dws->dma_chan_busy)) { - dmaengine_terminate_all(dws->rxchan); + dmaengine_terminate_sync(dws->rxchan); clear_bit(RX_BUSY, &dws->dma_chan_busy); } } From eebc509b20881b92d62e317b2c073e57c5f200f0 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 4 Jan 2017 12:29:05 +0900 Subject: [PATCH 094/645] perf probe: Fix --funcs to show correct symbols for offline module Fix --funcs (-F) option to show correct symbols for offline module. Since previous perf-probe uses machine__findnew_module_map() for offline module, even if user passes a module file (with full path) which is for other architecture, perf-probe always tries to load symbol map for current kernel module. This fix uses dso__new_map() to load the map from given binary as same as a map for user applications. Signed-off-by: Masami Hiramatsu Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/148350053478.19001.15435255244512631545.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-event.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 8f810961ec78..542e6472c4d7 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -163,7 +163,7 @@ static struct map *kernel_get_module_map(const char *module) /* A file path -- this is an offline module */ if (module && strchr(module, '/')) - return machine__findnew_module_map(host_machine, 0, module); + return dso__new_map(module); if (!module) module = "kernel"; @@ -173,6 +173,7 @@ static struct map *kernel_get_module_map(const char *module) if (strncmp(pos->dso->short_name + 1, module, pos->dso->short_name_len - 2) == 0 && module[pos->dso->short_name_len - 2] == '\0') { + map__get(pos); return pos; } } @@ -188,15 +189,6 @@ struct map *get_target_map(const char *target, bool user) return kernel_get_module_map(target); } -static void put_target_map(struct map *map, bool user) -{ - if (map && user) { - /* Only the user map needs to be released */ - map__put(map); - } -} - - static int convert_exec_to_group(const char *exec, char **result) { char *ptr1, *ptr2, *exec_copy; @@ -412,7 +404,7 @@ static int find_alternative_probe_point(struct debuginfo *dinfo, } out: - put_target_map(map, uprobes); + map__put(map); return ret; } @@ -2869,7 +2861,7 @@ static int find_probe_trace_events_from_map(struct perf_probe_event *pev, } out: - put_target_map(map, pev->uprobes); + map__put(map); free(syms); return ret; @@ -3362,10 +3354,7 @@ int show_available_funcs(const char *target, struct strfilter *_filter, return ret; /* Get a symbol map */ - if (user) - map = dso__new_map(target); - else - map = kernel_get_module_map(target); + map = get_target_map(target, user); if (!map) { pr_err("Failed to get a map for %s\n", (target) ? : "kernel"); return -EINVAL; @@ -3397,9 +3386,7 @@ int show_available_funcs(const char *target, struct strfilter *_filter, } end: - if (user) { - map__put(map); - } + map__put(map); exit_probe_symbol_maps(); return ret; From 8a937a25a7e3c19d5fb3f9d92f605cf5fda219d8 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 4 Jan 2017 12:30:19 +0900 Subject: [PATCH 095/645] perf probe: Fix to probe on gcc generated symbols for offline kernel Fix perf-probe to show probe definition on gcc generated symbols for offline kernel (including cross-arch kernel image). gcc sometimes optimizes functions and generate new symbols with suffixes such as ".constprop.N" or ".isra.N" etc. Since those symbol names are not recorded in DWARF, we have to find correct generated symbols from offline ELF binary to probe on it (kallsyms doesn't correct it). For online kernel or uprobes we don't need it because those are rebased on _text, or a section relative address. E.g. Without this: $ perf probe -k build-arm/vmlinux -F __slab_alloc* __slab_alloc.constprop.9 $ perf probe -k build-arm/vmlinux -D __slab_alloc p:probe/__slab_alloc __slab_alloc+0 If you put above definition on target machine, it should fail because there is no __slab_alloc in kallsyms. With this fix, perf probe shows correct probe definition on __slab_alloc.constprop.9: $ perf probe -k build-arm/vmlinux -D __slab_alloc p:probe/__slab_alloc __slab_alloc.constprop.9+0 Signed-off-by: Masami Hiramatsu Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/148350060434.19001.11864836288580083501.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-event.c | 48 ++++++++++++++++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 542e6472c4d7..4a57c8a60bd9 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -610,6 +610,51 @@ error: return ret ? : -ENOENT; } +/* + * Rename DWARF symbols to ELF symbols -- gcc sometimes optimizes functions + * and generate new symbols with suffixes such as .constprop.N or .isra.N + * etc. Since those symbols are not recorded in DWARF, we have to find + * correct generated symbols from offline ELF binary. + * For online kernel or uprobes we don't need this because those are + * rebased on _text, or already a section relative address. + */ +static int +post_process_offline_probe_trace_events(struct probe_trace_event *tevs, + int ntevs, const char *pathname) +{ + struct symbol *sym; + struct map *map; + unsigned long stext = 0; + u64 addr; + int i; + + /* Prepare a map for offline binary */ + map = dso__new_map(pathname); + if (!map || get_text_start_address(pathname, &stext) < 0) { + pr_warning("Failed to get ELF symbols for %s\n", pathname); + return -EINVAL; + } + + for (i = 0; i < ntevs; i++) { + addr = tevs[i].point.address + tevs[i].point.offset - stext; + sym = map__find_symbol(map, addr); + if (!sym) + continue; + if (!strcmp(sym->name, tevs[i].point.symbol)) + continue; + /* If we have no realname, use symbol for it */ + if (!tevs[i].point.realname) + tevs[i].point.realname = tevs[i].point.symbol; + else + free(tevs[i].point.symbol); + tevs[i].point.symbol = strdup(sym->name); + tevs[i].point.offset = addr - sym->start; + } + map__put(map); + + return 0; +} + static int add_exec_to_probe_trace_events(struct probe_trace_event *tevs, int ntevs, const char *exec) { @@ -671,7 +716,8 @@ post_process_kernel_probe_trace_events(struct probe_trace_event *tevs, /* Skip post process if the target is an offline kernel */ if (symbol_conf.ignore_vmlinux_buildid) - return 0; + return post_process_offline_probe_trace_events(tevs, ntevs, + symbol_conf.vmlinux_name); reloc_sym = kernel_get_ref_reloc_sym(); if (!reloc_sym) { From 4ee437fbf626b5ad756889d8bc0fcead3d66dde7 Mon Sep 17 00:00:00 2001 From: Caleb Crome Date: Tue, 3 Jan 2017 10:22:57 -0800 Subject: [PATCH 096/645] ASoC: fsl_ssi: set fifo watermark to more reliable value The fsl_ssi fifo watermark is by default set to 2 free spaces (i.e. activate DMA on FIFO when only 2 spaces are left.) This means the DMA must service the fifo within 2 audio samples, which is just not enough time for many use cases with high data rate. In many configurations the audio channel slips (causing l/r swap in stereo configurations, or channel slipping in multi-channel configurations). This patch gives more breathing room and allows the SSI to operate reliably by changing the fifio refill watermark to 8. There is no change in behavior for older chips (with an 8-deep fifo). Only the newer chips with a 15-deep fifo get the new behavior. I suspect a new fifo depth setting could be optimized on the older chips too, but I have not tested. Signed-off-by: Caleb Crome Reviewed-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_ssi.c | 74 +++++++++++++++++++++++++++++------------ 1 file changed, 53 insertions(+), 21 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 50349437d961..fde08660b63b 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -224,6 +224,12 @@ struct fsl_ssi_soc_data { * @dbg_stats: Debugging statistics * * @soc: SoC specific data + * + * @fifo_watermark: the FIFO watermark setting. Notifies DMA when + * there are @fifo_watermark or fewer words in TX fifo or + * @fifo_watermark or more empty words in RX fifo. + * @dma_maxburst: max number of words to transfer in one go. So far, + * this is always the same as fifo_watermark. */ struct fsl_ssi_private { struct regmap *regs; @@ -263,6 +269,9 @@ struct fsl_ssi_private { const struct fsl_ssi_soc_data *soc; struct device *dev; + + u32 fifo_watermark; + u32 dma_maxburst; }; /* @@ -1051,21 +1060,7 @@ static int _fsl_ssi_set_dai_fmt(struct device *dev, regmap_write(regs, CCSR_SSI_SRCR, srcr); regmap_write(regs, CCSR_SSI_SCR, scr); - /* - * Set the watermark for transmit FIFI 0 and receive FIFO 0. We don't - * use FIFO 1. We program the transmit water to signal a DMA transfer - * if there are only two (or fewer) elements left in the FIFO. Two - * elements equals one frame (left channel, right channel). This value, - * however, depends on the depth of the transmit buffer. - * - * We set the watermark on the same level as the DMA burstsize. For - * fiq it is probably better to use the biggest possible watermark - * size. - */ - if (ssi_private->use_dma) - wm = ssi_private->fifo_depth - 2; - else - wm = ssi_private->fifo_depth; + wm = ssi_private->fifo_watermark; regmap_write(regs, CCSR_SSI_SFCSR, CCSR_SSI_SFCSR_TFWM0(wm) | CCSR_SSI_SFCSR_RFWM0(wm) | @@ -1373,12 +1368,8 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, dev_dbg(&pdev->dev, "could not get baud clock: %ld\n", PTR_ERR(ssi_private->baudclk)); - /* - * We have burstsize be "fifo_depth - 2" to match the SSI - * watermark setting in fsl_ssi_startup(). - */ - ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2; - ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2; + ssi_private->dma_params_tx.maxburst = ssi_private->dma_maxburst; + ssi_private->dma_params_rx.maxburst = ssi_private->dma_maxburst; ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + CCSR_SSI_STX0; ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + CCSR_SSI_SRX0; @@ -1543,6 +1534,47 @@ static int fsl_ssi_probe(struct platform_device *pdev) /* Older 8610 DTs didn't have the fifo-depth property */ ssi_private->fifo_depth = 8; + /* + * Set the watermark for transmit FIFO 0 and receive FIFO 0. We don't + * use FIFO 1 but set the watermark appropriately nontheless. + * We program the transmit water to signal a DMA transfer + * if there are N elements left in the FIFO. For chips with 15-deep + * FIFOs, set watermark to 8. This allows the SSI to operate at a + * high data rate without channel slipping. Behavior is unchanged + * for the older chips with a fifo depth of only 8. A value of 4 + * might be appropriate for the older chips, but is left at + * fifo_depth-2 until sombody has a chance to test. + * + * We set the watermark on the same level as the DMA burstsize. For + * fiq it is probably better to use the biggest possible watermark + * size. + */ + switch (ssi_private->fifo_depth) { + case 15: + /* + * 2 samples is not enough when running at high data + * rates (like 48kHz @ 16 bits/channel, 16 channels) + * 8 seems to split things evenly and leave enough time + * for the DMA to fill the FIFO before it's over/under + * run. + */ + ssi_private->fifo_watermark = 8; + ssi_private->dma_maxburst = 8; + break; + case 8: + default: + /* + * maintain old behavior for older chips. + * Keeping it the same because I don't have an older + * board to test with. + * I suspect this could be changed to be something to + * leave some more space in the fifo. + */ + ssi_private->fifo_watermark = ssi_private->fifo_depth - 2; + ssi_private->dma_maxburst = ssi_private->fifo_depth - 2; + break; + } + dev_set_drvdata(&pdev->dev, ssi_private); if (ssi_private->soc->imx) { From a2dd8af00ca7fff4972425a4a6b19dd1840dc807 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 2 Jan 2017 13:44:28 +0200 Subject: [PATCH 097/645] spi: pxa2xx: add missed break The commit 7c7289a40425 ("spi: pxa2xx: Default thresholds to PXA configuration") while splitting up CE4100 code obviously missed a break condition in one chunk. Add it here. Looks like we have no active user of CE4100, though better to fix this later than never. Fixes: commit 7c7289a40425 ("spi: pxa2xx: Default thresholds to PXA configuration") Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index dd7b5b47291d..d6239fa718be 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1690,6 +1690,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) pxa2xx_spi_write(drv_data, SSCR1, tmp); tmp = SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8); pxa2xx_spi_write(drv_data, SSCR0, tmp); + break; default: tmp = SSCR1_RxTresh(RX_THRESH_DFLT) | SSCR1_TxTresh(TX_THRESH_DFLT); From cf9e1672a66c49ed8903c01b4c380a2f2dc91b40 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 5 Dec 2016 03:47:10 +0200 Subject: [PATCH 098/645] mtd: nand: lpc32xx: fix invalid error handling of a requested irq Semantics of NR_IRQS is different on machines with SPARSE_IRQ option disabled or enabled, in the latter case IRQs are allocated starting at least from the value specified by NR_IRQS and going upwards, so the check of (irq >= NR_IRQ) to decide about an error code returned by platform_get_irq() is completely invalid, don't attempt to overrule irq subsystem in the driver. The change fixes LPC32xx NAND MLC driver initialization on boot. Fixes: 8cb17b5ed017 ("irqchip: Add LPC32xx interrupt controller driver") Cc: stable@kernel.org # v4.7+ Signed-off-by: Vladimir Zapolskiy Acked-by: Sylvain Lemieux Signed-off-by: Boris Brezillon --- drivers/mtd/nand/lpc32xx_mlc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c index 5553a5d9efd1..846a66c1b133 100644 --- a/drivers/mtd/nand/lpc32xx_mlc.c +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -775,7 +775,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) init_completion(&host->comp_controller); host->irq = platform_get_irq(pdev, 0); - if ((host->irq < 0) || (host->irq >= NR_IRQS)) { + if (host->irq < 0) { dev_err(&pdev->dev, "failed to get platform irq\n"); res = -EINVAL; goto err_exit3; From fa84d7310d19e0b77979019df82e357b1e8443e3 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 4 Jan 2017 12:02:44 -0800 Subject: [PATCH 099/645] ARC: mmu: clarify the MMUv3 programming model Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index ec86ac0e3321..6d98e1d57a18 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -271,7 +271,11 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr, /* * For ARC700 MMUv3 I-cache and D-cache flushes - * Also reused for HS38 aliasing I-cache configuration + * - ARC700 programming model requires paddr and vaddr be passed in seperate + * AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the + * caches actually alias or not. + * - For HS38, only the aliasing I-cache configuration uses the PTAG reg + * (non aliasing I-cache version doesn't; while D-cache can't possibly alias) */ static inline void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, From 2163266c2704aa44211b6b61924a0fa570fe0d4b Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Wed, 28 Dec 2016 11:46:24 +0300 Subject: [PATCH 100/645] ARC: IRQ: Use hwirq instead of virq in mask/unmask It is necessary to use hwirq instead of virq when you communicate with an interrupt controller since there is no guaranty that virq numbers match hwirq numbers. Signed-off-by: Yuriy Kolerov Signed-off-by: Vineet Gupta --- arch/arc/kernel/intc-arcv2.c | 6 +++--- arch/arc/kernel/intc-compact.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 994dca7014db..ecef0fb0b66c 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -77,20 +77,20 @@ void arc_init_IRQ(void) static void arcv2_irq_mask(struct irq_data *data) { - write_aux_reg(AUX_IRQ_SELECT, data->irq); + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); write_aux_reg(AUX_IRQ_ENABLE, 0); } static void arcv2_irq_unmask(struct irq_data *data) { - write_aux_reg(AUX_IRQ_SELECT, data->irq); + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); write_aux_reg(AUX_IRQ_ENABLE, 1); } void arcv2_irq_enable(struct irq_data *data) { /* set default priority */ - write_aux_reg(AUX_IRQ_SELECT, data->irq); + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO); /* diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c index ce9deb953ca9..8c1fd5c00782 100644 --- a/arch/arc/kernel/intc-compact.c +++ b/arch/arc/kernel/intc-compact.c @@ -57,7 +57,7 @@ static void arc_irq_mask(struct irq_data *data) unsigned int ienb; ienb = read_aux_reg(AUX_IENABLE); - ienb &= ~(1 << data->irq); + ienb &= ~(1 << data->hwirq); write_aux_reg(AUX_IENABLE, ienb); } @@ -66,7 +66,7 @@ static void arc_irq_unmask(struct irq_data *data) unsigned int ienb; ienb = read_aux_reg(AUX_IENABLE); - ienb |= (1 << data->irq); + ienb |= (1 << data->hwirq); write_aux_reg(AUX_IENABLE, ienb); } From e51d5d02f688c45b6f644f472f0c80fdfa73f0cb Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Wed, 28 Dec 2016 11:46:25 +0300 Subject: [PATCH 101/645] ARCv2: IRQ: Call entry/exit functions for chained handlers in MCIP It is necessary to call entry/exit functions for parent interrupt controllers for proper masking/unmasking of interrupt lines. Signed-off-by: Yuriy Kolerov Signed-off-by: Vineet Gupta --- arch/arc/kernel/mcip.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 560c4afc2af4..9274f8ade8c7 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include @@ -221,10 +222,13 @@ static irq_hw_number_t idu_first_hwirq; static void idu_cascade_isr(struct irq_desc *desc) { struct irq_domain *idu_domain = irq_desc_get_handler_data(desc); + struct irq_chip *core_chip = irq_desc_get_chip(desc); irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc)); irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq; + chained_irq_enter(core_chip, desc); generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq)); + chained_irq_exit(core_chip, desc); } static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq) From dd853fd216d1485ed3045ff772079cc8689a9a4a Mon Sep 17 00:00:00 2001 From: Lukasz Odzioba Date: Wed, 28 Dec 2016 14:55:40 +0100 Subject: [PATCH 102/645] x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option A negative number can be specified in the cmdline which will be used as setup_clear_cpu_cap() argument. With that we can clear/set some bit in memory predceeding boot_cpu_data/cpu_caps_cleared which may cause kernel to misbehave. This patch adds lower bound check to setup_disablecpuid(). Boris Petkov reproduced a crash: [ 1.234575] BUG: unable to handle kernel paging request at ffffffff858bd540 [ 1.236535] IP: memcpy_erms+0x6/0x10 Signed-off-by: Lukasz Odzioba Acked-by: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: andi.kleen@intel.com Cc: bp@alien8.de Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: slaoub@gmail.com Fixes: ac72e7888a61 ("x86: add generic clearcpuid=... option") Link: http://lkml.kernel.org/r/1482933340-11857-1-git-send-email-lukasz.odzioba@intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index dc1697ca5191..9bab7a8a4293 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1221,7 +1221,7 @@ static __init int setup_disablecpuid(char *arg) { int bit; - if (get_option(&arg, &bit) && bit < NCAPINTS*32) + if (get_option(&arg, &bit) && bit >= 0 && bit < NCAPINTS * 32) setup_clear_cpu_cap(bit); else return 0; From 754c73cf4d2463022b2c9ae208026bf22564ed06 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 2 Jan 2017 11:22:29 +0200 Subject: [PATCH 103/645] x86/cpu: Fix typo in the comment for Anniedale The proper spelling of Anniedale SoC with 'e' in the middle. Fix typo in the comment line in intel-family.h header. Signed-off-by: Andy Shevchenko Cc: Dave Hansen Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170102092229.87036-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/intel-family.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h index 34a46dc076d3..8167fdb67ae8 100644 --- a/arch/x86/include/asm/intel-family.h +++ b/arch/x86/include/asm/intel-family.h @@ -57,7 +57,7 @@ #define INTEL_FAM6_ATOM_SILVERMONT2 0x4D /* Avaton/Rangely */ #define INTEL_FAM6_ATOM_AIRMONT 0x4C /* CherryTrail / Braswell */ #define INTEL_FAM6_ATOM_MERRIFIELD 0x4A /* Tangier */ -#define INTEL_FAM6_ATOM_MOOREFIELD 0x5A /* Annidale */ +#define INTEL_FAM6_ATOM_MOOREFIELD 0x5A /* Anniedale */ #define INTEL_FAM6_ATOM_GOLDMONT 0x5C #define INTEL_FAM6_ATOM_DENVERTON 0x5F /* Goldmont Microserver */ From 159d3726db12b3476bc59ea0ab0a702103d466b5 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 2 Jan 2017 11:24:50 +0200 Subject: [PATCH 104/645] x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev' The current implementation supports only Intel Merrifield platforms. Don't mess with the rest of the Intel MID family by not registering device with wrong properties. Signed-off-by: Andy Shevchenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170102092450.87229-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/device_libs/Makefile | 2 +- .../{platform_spidev.c => platform_mrfld_spidev.c} | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) rename arch/x86/platform/intel-mid/device_libs/{platform_spidev.c => platform_mrfld_spidev.c} (91%) diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile index 61b5ed2b7d40..90e4f2a6625b 100644 --- a/arch/x86/platform/intel-mid/device_libs/Makefile +++ b/arch/x86/platform/intel-mid/device_libs/Makefile @@ -15,7 +15,7 @@ obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o # SPI Devices -obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_spidev.o +obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o # I2C Devices obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_spidev.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c similarity index 91% rename from arch/x86/platform/intel-mid/device_libs/platform_spidev.c rename to arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c index 30c601b399ee..27186ad654c9 100644 --- a/arch/x86/platform/intel-mid/device_libs/platform_spidev.c +++ b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c @@ -11,6 +11,7 @@ * of the License. */ +#include #include #include #include @@ -34,6 +35,9 @@ static void __init *spidev_platform_data(void *info) { struct spi_board_info *spi_info = info; + if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER) + return ERR_PTR(-ENODEV); + spi_info->mode = SPI_MODE_0; spi_info->controller_data = &spidev_spi_chip; From 74545f63890e38520eb4d1dbedcadaa9c0dbc824 Mon Sep 17 00:00:00 2001 From: David Carrillo-Cisneros Date: Thu, 22 Dec 2016 17:17:40 -0800 Subject: [PATCH 105/645] perf/x86: Set pmu->module in Intel PMU modules The conversion of Intel PMU drivers into modules did not include reference counting. The machine will crash when attempting to access deleted code if an event from a module PMU is started and the module removed before the event is destroyed. i.e. this crashes the machine: $ insmod intel-rapl-perf.ko $ perf stat -e power/energy-cores/ -C 0 & $ rmmod intel-rapl-perf.ko Set THIS_MODULE to pmu->module in Intel module PMUs so that generic code can handle reference counting and deny rmmod while an event still exists. Signed-off-by: David Carrillo-Cisneros Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Dave Hansen Cc: Jiri Olsa Cc: Kan Liang Cc: Linus Torvalds Cc: Paul Turner Cc: Peter Zijlstra Cc: Srinivas Pandruvada Cc: Stephane Eranian Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1482455860-116269-1-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/cstate.c | 2 ++ arch/x86/events/intel/rapl.c | 1 + arch/x86/events/intel/uncore.c | 1 + 3 files changed, 4 insertions(+) diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c index fec8a461bdef..1076c9a77292 100644 --- a/arch/x86/events/intel/cstate.c +++ b/arch/x86/events/intel/cstate.c @@ -434,6 +434,7 @@ static struct pmu cstate_core_pmu = { .stop = cstate_pmu_event_stop, .read = cstate_pmu_event_update, .capabilities = PERF_PMU_CAP_NO_INTERRUPT, + .module = THIS_MODULE, }; static struct pmu cstate_pkg_pmu = { @@ -447,6 +448,7 @@ static struct pmu cstate_pkg_pmu = { .stop = cstate_pmu_event_stop, .read = cstate_pmu_event_update, .capabilities = PERF_PMU_CAP_NO_INTERRUPT, + .module = THIS_MODULE, }; static const struct cstate_model nhm_cstates __initconst = { diff --git a/arch/x86/events/intel/rapl.c b/arch/x86/events/intel/rapl.c index bd34124449b0..17c3564d087a 100644 --- a/arch/x86/events/intel/rapl.c +++ b/arch/x86/events/intel/rapl.c @@ -697,6 +697,7 @@ static int __init init_rapl_pmus(void) rapl_pmus->pmu.start = rapl_pmu_event_start; rapl_pmus->pmu.stop = rapl_pmu_event_stop; rapl_pmus->pmu.read = rapl_pmu_event_read; + rapl_pmus->pmu.module = THIS_MODULE; return 0; } diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c index 97c246f84dea..8c4ccdc3a3f3 100644 --- a/arch/x86/events/intel/uncore.c +++ b/arch/x86/events/intel/uncore.c @@ -733,6 +733,7 @@ static int uncore_pmu_register(struct intel_uncore_pmu *pmu) .start = uncore_pmu_event_start, .stop = uncore_pmu_event_stop, .read = uncore_pmu_event_read, + .module = THIS_MODULE, }; } else { pmu->pmu = *pmu->type->pmu; From 753aacfd2e95df6a0caf23c03dc309020765bea9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 5 Jan 2017 10:57:14 +0100 Subject: [PATCH 106/645] nl80211: fix sched scan netlink socket owner destruction A single netlink socket might own multiple interfaces *and* a scheduled scan request (which might belong to another interface), so when it goes away both may need to be destroyed. Remove the schedule_scan_stop indirection to fix this - it's only needed for interface destruction because of the way this works right now, with a single work taking care of all interfaces. Cc: stable@vger.kernel.org Fixes: 93a1e86ce10e4 ("nl80211: Stop scheduled scan if netlink client disappears") Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 3df85a751a85..ef5eff93a8b8 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -14502,13 +14502,17 @@ static int nl80211_netlink_notify(struct notifier_block * nb, list_for_each_entry_rcu(rdev, &cfg80211_rdev_list, list) { bool schedule_destroy_work = false; - bool schedule_scan_stop = false; struct cfg80211_sched_scan_request *sched_scan_req = rcu_dereference(rdev->sched_scan_req); if (sched_scan_req && notify->portid && - sched_scan_req->owner_nlportid == notify->portid) - schedule_scan_stop = true; + sched_scan_req->owner_nlportid == notify->portid) { + sched_scan_req->owner_nlportid = 0; + + if (rdev->ops->sched_scan_stop && + rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) + schedule_work(&rdev->sched_scan_stop_wk); + } list_for_each_entry_rcu(wdev, &rdev->wiphy.wdev_list, list) { cfg80211_mlme_unregister_socket(wdev, notify->portid); @@ -14539,12 +14543,6 @@ static int nl80211_netlink_notify(struct notifier_block * nb, spin_unlock(&rdev->destroy_list_lock); schedule_work(&rdev->destroy_work); } - } else if (schedule_scan_stop) { - sched_scan_req->owner_nlportid = 0; - - if (rdev->ops->sched_scan_stop && - rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) - schedule_work(&rdev->sched_scan_stop_wk); } } From 60448b077ed93d227e6c117a9e87db76ff0c1911 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 4 Jan 2017 15:44:52 -0600 Subject: [PATCH 107/645] ASoC: Intel: bytcr-rt5640: fix settings in internal clock mode Frequency value of zero did not make sense, use same 24.576MHz setting and only change the clock source in idle mode Suggested-by: Bard Liao Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index e33e4777a65c..8d2fb2d6f532 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -142,7 +142,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, * for Jack detection and button press */ ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK, - 0, + 48000 * 512, SND_SOC_CLOCK_IN); if (!ret) { if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) From 08f9572671c8047e7234cbf150869aa3c3d59a97 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 5 Jan 2017 14:25:59 +0100 Subject: [PATCH 108/645] HID: ignore Petzl USB headlamp This headlamp contains a dummy HID descriptor which pretends to be a mouse-like device, but can't be used as a mouse at all. Reported-by: Lukas Ocilka Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index cff060b56da9..ea36b557d5ee 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2496,6 +2496,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) }, + { HID_USB_DEVICE(USB_VENDOR_ID_PETZL, USB_DEVICE_ID_PETZL_HEADLAMP) }, { HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE) }, { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) }, #if IS_ENABLED(CONFIG_MOUSE_SYNAPTICS_USB) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 54bd22dc1411..f46f2c5117fa 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -816,6 +816,9 @@ #define USB_VENDOR_ID_PETALYNX 0x18b1 #define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE 0x0037 +#define USB_VENDOR_ID_PETZL 0x2122 +#define USB_DEVICE_ID_PETZL_HEADLAMP 0x1234 + #define USB_VENDOR_ID_PHILIPS 0x0471 #define USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE 0x0617 From 9b60047a9c950e3fde186466774ffd1ab1104d4e Mon Sep 17 00:00:00 2001 From: Zhu Yanjun Date: Thu, 5 Jan 2017 02:54:27 -0500 Subject: [PATCH 109/645] r8169: fix the typo in the comment >From the realtek data sheet, the PID0 should be bit 0. Signed-off-by: Zhu Yanjun Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 44389c90056a..8f1623bf2134 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -696,7 +696,7 @@ enum rtl_tx_desc_bit_1 { enum rtl_rx_desc_bit { /* Rx private */ PID1 = (1 << 18), /* Protocol ID bit 1/2 */ - PID0 = (1 << 17), /* Protocol ID bit 2/2 */ + PID0 = (1 << 17), /* Protocol ID bit 0/2 */ #define RxProtoUDP (PID1) #define RxProtoTCP (PID0) From a3ac350793d90d1da631c8beeee9352387974ed5 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 3 Jan 2017 11:37:48 -0600 Subject: [PATCH 110/645] ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate Commit 485fa1261f78 ("ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth") set the wrong baud rate for the UART. The Baud rate was 300,000 and it should be 3,000,000 for WL1283. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pdata-quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 477910a48448..70c004794880 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -161,7 +161,7 @@ static struct ti_st_plat_data wilink7_pdata = { .nshutdown_gpio = 162, .dev_name = "/dev/ttyO1", .flow_cntrl = 1, - .baud_rate = 300000, + .baud_rate = 3000000, }; static struct platform_device wl128x_device = { From 6ca36a455e2730a3195a5596d53c900c9cd00838 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Wed, 4 Jan 2017 10:39:40 +0530 Subject: [PATCH 111/645] ARM: dts: am335x-icev2: Remove the duplicated pinmux setting There is no mmc sd card detect on am335x-ice board. But the spi0_cs1 pin being configured as mmcsd_cd. Removing it fixes the below warning during boot: pinctrl-single 44e10800.pinmux: pin 44e10960.0 already requested by 48030000.spi; cannot claim for 48060000.mmc Signed-off-by: Lokesh Vutla [tony@atomide.com: tidied up commit message] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-icev2.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 1463df3b5b19..8ed46f9d79b7 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -170,7 +170,6 @@ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ - AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */ >; }; From 28ca833ecf89c585a9543fb21aef6b2bdbbaa48a Mon Sep 17 00:00:00 2001 From: JackieLiu Date: Tue, 13 Dec 2016 13:55:27 +0800 Subject: [PATCH 112/645] md/raid5-cache: removes unnecessary write-through mode judgments The write-through mode has been returned in front of the function, do not need to do it again. Signed-off-by: JackieLiu Reviewed-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index d7bfb6fc8aef..49aea4231084 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -2418,9 +2418,6 @@ void r5c_finish_stripe_write_out(struct r5conf *conf, if (do_wakeup) wake_up(&conf->wait_for_overlap); - if (conf->log->r5c_journal_mode == R5C_JOURNAL_MODE_WRITE_THROUGH) - return; - spin_lock_irq(&conf->log->stripe_in_journal_lock); list_del_init(&sh->r5c); spin_unlock_irq(&conf->log->stripe_in_journal_lock); From 3c66abbaaf69671dfd3eb9fa7740b5d7ec688231 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Wed, 14 Dec 2016 15:38:01 -0800 Subject: [PATCH 113/645] md/r5cache: simplify handling of sh->log_start in recovery We only need to update sh->log_start at the end of recovery, which is r5c_recovery_rewrite_data_only_stripes(), so it is not necessary to set it before that. In this patch, log_start is removed from r5c_recovery_alloc_stripe(). After updating all sh->log_start, rewrite_data_only_stripes() also updates log->next_checkpoints to the last sh->log_start. Signed-off-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 49aea4231084..b178a8fef266 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -1682,8 +1682,7 @@ out: static struct stripe_head * r5c_recovery_alloc_stripe(struct r5conf *conf, - sector_t stripe_sect, - sector_t log_start) + sector_t stripe_sect) { struct stripe_head *sh; @@ -1692,7 +1691,6 @@ r5c_recovery_alloc_stripe(struct r5conf *conf, return NULL; /* no more stripe available */ r5l_recovery_reset_stripe(sh); - sh->log_start = log_start; return sh; } @@ -1862,7 +1860,7 @@ r5c_recovery_analyze_meta_block(struct r5l_log *log, stripe_sect); if (!sh) { - sh = r5c_recovery_alloc_stripe(conf, stripe_sect, ctx->pos); + sh = r5c_recovery_alloc_stripe(conf, stripe_sect); /* * cannot get stripe from raid5_get_active_stripe * try replay some stripes @@ -1871,7 +1869,7 @@ r5c_recovery_analyze_meta_block(struct r5l_log *log, r5c_recovery_replay_stripes( cached_stripe_list, ctx); sh = r5c_recovery_alloc_stripe( - conf, stripe_sect, ctx->pos); + conf, stripe_sect); } if (!sh) { pr_debug("md/raid:%s: Increasing stripe cache size to %d to recovery data on journal.\n", @@ -1879,8 +1877,8 @@ r5c_recovery_analyze_meta_block(struct r5l_log *log, conf->min_nr_stripes * 2); raid5_set_cache_size(mddev, conf->min_nr_stripes * 2); - sh = r5c_recovery_alloc_stripe( - conf, stripe_sect, ctx->pos); + sh = r5c_recovery_alloc_stripe(conf, + stripe_sect); } if (!sh) { pr_err("md/raid:%s: Cannot get enough stripes due to memory pressure. Recovery failed.\n", @@ -1894,7 +1892,6 @@ r5c_recovery_analyze_meta_block(struct r5l_log *log, if (!test_bit(STRIPE_R5C_CACHING, &sh->state) && test_bit(R5_Wantwrite, &sh->dev[sh->pd_idx].flags)) { r5l_recovery_replay_one_stripe(conf, sh, ctx); - sh->log_start = ctx->pos; list_move_tail(&sh->lru, cached_stripe_list); } r5l_recovery_load_data(log, sh, ctx, payload, @@ -1933,8 +1930,6 @@ static void r5c_recovery_load_one_stripe(struct r5l_log *log, set_bit(R5_UPTODATE, &dev->flags); } } - list_add_tail(&sh->r5c, &log->stripe_in_journal_list); - atomic_inc(&log->stripe_in_journal_count); } /* @@ -2070,6 +2065,7 @@ r5c_recovery_rewrite_data_only_stripes(struct r5l_log *log, struct stripe_head *sh, *next; struct mddev *mddev = log->rdev->mddev; struct page *page; + sector_t next_checkpoint = MaxSector; page = alloc_page(GFP_KERNEL); if (!page) { @@ -2078,6 +2074,8 @@ r5c_recovery_rewrite_data_only_stripes(struct r5l_log *log, return -ENOMEM; } + WARN_ON(list_empty(&ctx->cached_list)); + list_for_each_entry_safe(sh, next, &ctx->cached_list, lru) { struct r5l_meta_block *mb; int i; @@ -2123,12 +2121,15 @@ r5c_recovery_rewrite_data_only_stripes(struct r5l_log *log, sync_page_io(log->rdev, ctx->pos, PAGE_SIZE, page, REQ_OP_WRITE, REQ_FUA, false); sh->log_start = ctx->pos; + list_add_tail(&sh->r5c, &log->stripe_in_journal_list); + atomic_inc(&log->stripe_in_journal_count); ctx->pos = write_pos; ctx->seq += 1; - + next_checkpoint = sh->log_start; list_del_init(&sh->lru); raid5_release_stripe(sh); } + log->next_checkpoint = next_checkpoint; __free_page(page); return 0; } @@ -2139,7 +2140,6 @@ static int r5l_recovery_log(struct r5l_log *log) struct r5l_recovery_ctx ctx; int ret; sector_t pos; - struct stripe_head *sh; ctx.pos = log->last_checkpoint; ctx.seq = log->last_cp_seq; @@ -2164,9 +2164,6 @@ static int r5l_recovery_log(struct r5l_log *log) log->next_checkpoint = ctx.pos; r5l_log_write_empty_meta_block(log, ctx.pos, ctx.seq++); ctx.pos = r5l_ring_add(log, ctx.pos, BLOCK_SECTORS); - } else { - sh = list_last_entry(&ctx.cached_list, struct stripe_head, lru); - log->next_checkpoint = sh->log_start; } if ((ctx.data_only_stripes == 0) && (ctx.data_parity_stripes == 0)) From d2250f105f18a43fdab17421bd80b0ffc9fcc53f Mon Sep 17 00:00:00 2001 From: Song Liu Date: Wed, 14 Dec 2016 15:38:02 -0800 Subject: [PATCH 114/645] md/r5cache: assign conf->log before r5l_load_log() r5l_load_log() calls functions that requires a proper conf->log, for example, r5c_is_writeback(). Therefore, we should set conf->log before calling r5l_load_log(). If r5l_load_log() fails, conf->log is set back to NULL. Signed-off-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index b178a8fef266..bff1b4a949e8 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -2633,14 +2633,16 @@ int r5l_init_log(struct r5conf *conf, struct md_rdev *rdev) spin_lock_init(&log->stripe_in_journal_lock); atomic_set(&log->stripe_in_journal_count, 0); + rcu_assign_pointer(conf->log, log); + if (r5l_load_log(log)) goto error; - rcu_assign_pointer(conf->log, log); set_bit(MD_HAS_JOURNAL, &conf->mddev->flags); return 0; error: + rcu_assign_pointer(conf->log, NULL); md_unregister_thread(&log->reclaim_thread); reclaim_thread: mempool_destroy(log->meta_pool); From 99f17890f04cff0262de7393c60a2f6d9c9c7e71 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 23 Dec 2016 00:52:30 +0000 Subject: [PATCH 115/645] md/r5cache: fix spelling mistake on "recoverying" Trivial fix to spelling mistake "recoverying" to "recovering" in pr_dbg message. Signed-off-by: Colin Ian King Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index bff1b4a949e8..0e8ed2c327b0 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -2170,7 +2170,7 @@ static int r5l_recovery_log(struct r5l_log *log) pr_debug("md/raid:%s: starting from clean shutdown\n", mdname(mddev)); else { - pr_debug("md/raid:%s: recoverying %d data-only stripes and %d data-parity stripes\n", + pr_debug("md/raid:%s: recovering %d data-only stripes and %d data-parity stripes\n", mdname(mddev), ctx.data_only_stripes, ctx.data_parity_stripes); From 394ed8e4743b0cfc5496fe49059fbfc2bc8eae35 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 4 Jan 2017 16:10:19 -0800 Subject: [PATCH 116/645] md: cleanup mddev flag clear for takeover Commit 6995f0b (md: takeover should clear unrelated bits) clear unrelated bits, but it's quite fragile. To avoid error in the future, define a macro for unsupported mddev flags for each raid type and use it to clear unsupported mddev flags. This should be less error-prone. Suggested-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/md.h | 8 ++++++++ drivers/md/raid0.c | 12 ++++++++---- drivers/md/raid1.c | 8 ++++++-- drivers/md/raid5.c | 5 ++++- 4 files changed, 26 insertions(+), 7 deletions(-) diff --git a/drivers/md/md.h b/drivers/md/md.h index e38936d05df1..2a514036a83d 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -212,6 +212,7 @@ extern int rdev_clear_badblocks(struct md_rdev *rdev, sector_t s, int sectors, int is_new); struct md_cluster_info; +/* change UNSUPPORTED_MDDEV_FLAGS for each array type if new flag is added */ enum mddev_flags { MD_ARRAY_FIRST_USE, /* First use of array, needs initialization */ MD_CLOSING, /* If set, we are closing the array, do not open @@ -702,4 +703,11 @@ static inline int mddev_is_clustered(struct mddev *mddev) { return mddev->cluster_info && mddev->bitmap_info.nodes > 1; } + +/* clear unsupported mddev_flags */ +static inline void mddev_clear_unsupported_flags(struct mddev *mddev, + unsigned long unsupported_flags) +{ + mddev->flags &= ~unsupported_flags; +} #endif /* _MD_MD_H */ diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index a162fedeb51a..848365d474f3 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -26,6 +26,11 @@ #include "raid0.h" #include "raid5.h" +#define UNSUPPORTED_MDDEV_FLAGS \ + ((1L << MD_HAS_JOURNAL) | \ + (1L << MD_JOURNAL_CLEAN) | \ + (1L << MD_FAILFAST_SUPPORTED)) + static int raid0_congested(struct mddev *mddev, int bits) { struct r0conf *conf = mddev->private; @@ -539,8 +544,7 @@ static void *raid0_takeover_raid45(struct mddev *mddev) mddev->delta_disks = -1; /* make sure it will be not marked as dirty */ mddev->recovery_cp = MaxSector; - clear_bit(MD_HAS_JOURNAL, &mddev->flags); - clear_bit(MD_JOURNAL_CLEAN, &mddev->flags); + mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS); create_strip_zones(mddev, &priv_conf); @@ -583,7 +587,7 @@ static void *raid0_takeover_raid10(struct mddev *mddev) mddev->degraded = 0; /* make sure it will be not marked as dirty */ mddev->recovery_cp = MaxSector; - clear_bit(MD_FAILFAST_SUPPORTED, &mddev->flags); + mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS); create_strip_zones(mddev, &priv_conf); return priv_conf; @@ -626,7 +630,7 @@ static void *raid0_takeover_raid1(struct mddev *mddev) mddev->raid_disks = 1; /* make sure it will be not marked as dirty */ mddev->recovery_cp = MaxSector; - clear_bit(MD_FAILFAST_SUPPORTED, &mddev->flags); + mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS); create_strip_zones(mddev, &priv_conf); return priv_conf; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 14422407e520..7b0f647bcccb 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -42,6 +42,10 @@ #include "raid1.h" #include "bitmap.h" +#define UNSUPPORTED_MDDEV_FLAGS \ + ((1L << MD_HAS_JOURNAL) | \ + (1L << MD_JOURNAL_CLEAN)) + /* * Number of guaranteed r1bios in case of extreme VM load: */ @@ -3257,8 +3261,8 @@ static void *raid1_takeover(struct mddev *mddev) if (!IS_ERR(conf)) { /* Array must appear to be quiesced */ conf->array_frozen = 1; - clear_bit(MD_HAS_JOURNAL, &mddev->flags); - clear_bit(MD_JOURNAL_CLEAN, &mddev->flags); + mddev_clear_unsupported_flags(mddev, + UNSUPPORTED_MDDEV_FLAGS); } return conf; } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 06d7279bdd04..7b1da6e95a56 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -62,6 +62,8 @@ #include "raid0.h" #include "bitmap.h" +#define UNSUPPORTED_MDDEV_FLAGS (1L << MD_FAILFAST_SUPPORTED) + #define cpu_to_group(cpu) cpu_to_node(cpu) #define ANY_GROUP NUMA_NO_NODE @@ -7830,7 +7832,8 @@ static void *raid5_takeover_raid1(struct mddev *mddev) ret = setup_conf(mddev); if (!IS_ERR_VALUE(ret)) - clear_bit(MD_FAILFAST_SUPPORTED, &mddev->flags); + mddev_clear_unsupported_flags(mddev, + UNSUPPORTED_MDDEV_FLAGS); return ret; } From a2b1e8a20c992b01eeb76de00d4f534cbe9f3822 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Wed, 14 Dec 2016 11:59:34 +0100 Subject: [PATCH 117/645] selftests: do not require bash for the generated test Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by: Rolf Eike Beer Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan --- tools/testing/selftests/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 71b05891a6a1..831022b12848 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -90,7 +90,7 @@ ifdef INSTALL_PATH done; @# Ask all targets to emit their test scripts - echo "#!/bin/bash" > $(ALL_SCRIPT) + echo "#!/bin/sh" > $(ALL_SCRIPT) echo "cd \$$(dirname \$$0)" >> $(ALL_SCRIPT) echo "ROOT=\$$PWD" >> $(ALL_SCRIPT) From d979e13a3fa9067c8cd46e292ed859626d443996 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Wed, 14 Dec 2016 11:58:20 +0100 Subject: [PATCH 118/645] selftests: do not require bash to run bpf tests Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by: Rolf Eike Beer Cc: stable@vger.kernel.org Acked-by: Daniel Borkmann Signed-off-by: Shuah Khan --- tools/testing/selftests/bpf/test_kmod.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/test_kmod.sh b/tools/testing/selftests/bpf/test_kmod.sh index 92e627adf354..6d58cca8e235 100755 --- a/tools/testing/selftests/bpf/test_kmod.sh +++ b/tools/testing/selftests/bpf/test_kmod.sh @@ -1,4 +1,4 @@ -#!/bin/bash +#!/bin/sh SRC_TREE=../../../../ From 3659f98b5375d195f1870c3e508fe51e52206839 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Wed, 14 Dec 2016 11:59:57 +0100 Subject: [PATCH 119/645] selftests: do not require bash to run netsocktests testcase Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by: Rolf Eike Beer Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan --- tools/testing/selftests/net/run_netsocktests | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests index c09a682df56a..16058bbea7a8 100755 --- a/tools/testing/selftests/net/run_netsocktests +++ b/tools/testing/selftests/net/run_netsocktests @@ -1,4 +1,4 @@ -#!/bin/bash +#!/bin/sh echo "--------------------" echo "running socket test" From 7738789fba09108a28a5fb4739595d9a0a2f85fe Mon Sep 17 00:00:00 2001 From: Colin King Date: Tue, 27 Dec 2016 16:17:21 +0000 Subject: [PATCH 120/645] selftests: x86/pkeys: fix spelling mistake: "itertation" -> "iteration" Fix spelling mistake in print test pass message. Signed-off-by: Colin Ian King Signed-off-by: Shuah Khan --- tools/testing/selftests/x86/protection_keys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/x86/protection_keys.c b/tools/testing/selftests/x86/protection_keys.c index bdd58c78902e..df9e0a0cdf29 100644 --- a/tools/testing/selftests/x86/protection_keys.c +++ b/tools/testing/selftests/x86/protection_keys.c @@ -1367,7 +1367,7 @@ void run_tests_once(void) tracing_off(); close_test_fds(); - printf("test %2d PASSED (itertation %d)\n", test_nr, iteration_nr); + printf("test %2d PASSED (iteration %d)\n", test_nr, iteration_nr); dprintf1("======================\n\n"); } iteration_nr++; From 1c3415a06b1016a596bfe59e0cfee56c773aa958 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 5 Jan 2017 14:14:54 -0800 Subject: [PATCH 121/645] Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data The following crash may be seen if bad data is received from the touchscreen. [ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff [ 2189.430738] divide error: 0000 [#1] PREEMPT SMP [ 2189.434679] gsmi: Log Shutdown Reason 0x03 [ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231 fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun [ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G W 3.18.0-13101-g57e8190 #1 [ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016 [ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000 [ 2189.434913] RIP: 0010:[] [] elants_i2c_irq+0x190/0x200 [ 2189.434937] RSP: 0018:ffff88017a2bfd98 EFLAGS: 00010293 [ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8 [ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 [ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000 [ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800 [ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80 [ 2189.435011] FS: 0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 2189.435022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0 [ 2189.435039] Stack: [ 2189.435044] ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574 [ 2189.435060] 0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53 [ 2189.435074] ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574 [ 2189.435089] Call Trace: [ 2189.435101] [] ? irq_thread_dtor+0xa9/0xa9 [ 2189.435112] [] irq_thread_fn+0x20/0x40 [ 2189.435123] [] irq_thread+0x14e/0x222 [ 2189.435135] [] ? __schedule+0x3b3/0x57a [ 2189.435145] [] ? wake_threads_waitq+0x2d/0x2d [ 2189.435156] [] ? irq_thread_fn+0x40/0x40 [ 2189.435168] [] kthread+0x10e/0x116 [ 2189.435178] [] ? __kthread_parkme+0x67/0x67 [ 2189.435189] [] ret_from_fork+0x7c/0xb0 [ 2189.435199] [] ? __kthread_parkme+0x67/0x67 [ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c 24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 ff 83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac [ 2189.435312] RIP [] elants_i2c_irq+0x190/0x200 [ 2189.435323] RSP [ 2189.435350] ---[ end trace f4945345a75d96dd ]--- [ 2189.443841] Kernel panic - not syncing: Fatal exception [ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2189.444519] gsmi: Log Shutdown Reason 0x02 The problem was seen with a 3.18 based kernel, but there is no reason to believe that the upstream code is safe. Fixes: 66aee90088da2 ("Input: add support for Elan eKTH I2C touchscreens") Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/elants_i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 02aec284deca..3e6003d32e56 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -914,9 +914,9 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev) case QUEUE_HEADER_NORMAL: report_count = ts->buf[FW_HDR_COUNT]; - if (report_count > 3) { + if (report_count == 0 || report_count > 3) { dev_err(&client->dev, - "too large report count: %*ph\n", + "bad report count: %*ph\n", HEADER_SIZE, ts->buf); break; } From 9698b6f473555a722bf81a3371998427d5d27bde Mon Sep 17 00:00:00 2001 From: Satish Kharat Date: Wed, 14 Dec 2016 13:20:41 -0800 Subject: [PATCH 122/645] scsi: fnic: Avoid sending reset to firmware when another reset is in progress This fix is to avoid calling fnic_fw_reset_handler through fnic_host_reset when a finc reset is alreay in progress. Signed-off-by: Satish Kharat Signed-off-by: Sesidhar Baddela Signed-off-by: Martin K. Petersen --- drivers/scsi/fnic/fnic.h | 1 + drivers/scsi/fnic/fnic_scsi.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index 9ddc9200e0a4..9e4b7709043e 100644 --- a/drivers/scsi/fnic/fnic.h +++ b/drivers/scsi/fnic/fnic.h @@ -248,6 +248,7 @@ struct fnic { struct completion *remove_wait; /* device remove thread blocks */ atomic_t in_flight; /* io counter */ + bool internal_reset_inprogress; u32 _reserved; /* fill hole */ unsigned long state_flags; /* protected by host lock */ enum fnic_state state; diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index 2544a37ece0a..adb3d5871e74 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -2581,6 +2581,19 @@ int fnic_host_reset(struct scsi_cmnd *sc) unsigned long wait_host_tmo; struct Scsi_Host *shost = sc->device->host; struct fc_lport *lp = shost_priv(shost); + struct fnic *fnic = lport_priv(lp); + unsigned long flags; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->internal_reset_inprogress == 0) { + fnic->internal_reset_inprogress = 1; + } else { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "host reset in progress skipping another host reset\n"); + return SUCCESS; + } + spin_unlock_irqrestore(&fnic->fnic_lock, flags); /* * If fnic_reset is successful, wait for fabric login to complete @@ -2601,6 +2614,9 @@ int fnic_host_reset(struct scsi_cmnd *sc) } } + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->internal_reset_inprogress = 0; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); return ret; } From 0371adcdaca92912baaa3256ed13e058a016e62d Mon Sep 17 00:00:00 2001 From: Burak Ok Date: Wed, 21 Dec 2016 14:45:53 +0100 Subject: [PATCH 123/645] scsi: snic: Return error code on memory allocation failure If a call to mempool_create_slab_pool() in snic_probe() returns NULL, return -ENOMEM to indicate failure. mempool_creat_slab_pool() only fails if it cannot allocate memory. https://bugzilla.kernel.org/show_bug.cgi?id=189061 Reported-by: bianpan2010@ruc.edu.cn Signed-off-by: Burak Ok Signed-off-by: Andreas Schaertl Acked-by: Narsimhulu Musini Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/snic/snic_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/snic/snic_main.c b/drivers/scsi/snic/snic_main.c index 396b32dca074..7cf70aaec0ba 100644 --- a/drivers/scsi/snic/snic_main.c +++ b/drivers/scsi/snic/snic_main.c @@ -591,6 +591,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!pool) { SNIC_HOST_ERR(shost, "dflt sgl pool creation failed\n"); + ret = -ENOMEM; goto err_free_res; } @@ -601,6 +602,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!pool) { SNIC_HOST_ERR(shost, "max sgl pool creation failed\n"); + ret = -ENOMEM; goto err_free_dflt_sgl_pool; } @@ -611,6 +613,7 @@ snic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!pool) { SNIC_HOST_ERR(shost, "snic tmreq info pool creation failed.\n"); + ret = -ENOMEM; goto err_free_max_sgl_pool; } From 2d1148f0f45079d25a0fa0d67e4fdb2a656d12fb Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Fri, 23 Dec 2016 20:40:19 -0800 Subject: [PATCH 124/645] scsi: bfa: Increase requested firmware version to 3.2.5.1 bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR Series Adapter Firmware"). bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in 3f307c3d70 ("bna: Update the Driver and Firmware Version") bfa was not updated. I presume this was an oversight but it broke support for bfa+bna cards such as the following 04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.2 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.3 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) Currently, if the bfa module is loaded first, bna fails to probe the respective devices with [ 215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1 [ 215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144 [ 215.060656] bna 0000:04:00.2: initialization failed err=1 [ 215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144 [ 215.090644] bna 0000:04:00.3: initialization failed err=1 Whereas if bna is loaded first, bfa fails with [ 249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version [ 249.833513] bfa 0000:04:00.0: bfa init failed [ 249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0 [ 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version [ 250.045449] bfa 0000:04:00.1: bfa init failed [ 250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0 Increase bfa's requested firmware version. Also increase the driver version. I only tested that all of the devices probe without error. Reported-by: Tim Ehlers Signed-off-by: Benjamin Poirier Acked-by: Rasesh Mody Signed-off-by: Martin K. Petersen --- drivers/scsi/bfa/bfad.c | 6 +++--- drivers/scsi/bfa/bfad_drv.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index 9d253cb83ee7..e70410beb83a 100644 --- a/drivers/scsi/bfa/bfad.c +++ b/drivers/scsi/bfa/bfad.c @@ -64,9 +64,9 @@ int max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS; u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size; u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2; -#define BFAD_FW_FILE_CB "cbfw-3.2.3.0.bin" -#define BFAD_FW_FILE_CT "ctfw-3.2.3.0.bin" -#define BFAD_FW_FILE_CT2 "ct2fw-3.2.3.0.bin" +#define BFAD_FW_FILE_CB "cbfw-3.2.5.1.bin" +#define BFAD_FW_FILE_CT "ctfw-3.2.5.1.bin" +#define BFAD_FW_FILE_CT2 "ct2fw-3.2.5.1.bin" static u32 *bfad_load_fwimg(struct pci_dev *pdev); static void bfad_free_fwimg(void); diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h index f9e862093a25..cfcfff48e8e1 100644 --- a/drivers/scsi/bfa/bfad_drv.h +++ b/drivers/scsi/bfa/bfad_drv.h @@ -58,7 +58,7 @@ #ifdef BFA_DRIVER_VERSION #define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION #else -#define BFAD_DRIVER_VERSION "3.2.25.0" +#define BFAD_DRIVER_VERSION "3.2.25.1" #endif #define BFAD_PROTO_NAME FCPI_NAME From f53345e8cf027d03187b9417f1f8883c516e1a5b Mon Sep 17 00:00:00 2001 From: Jacob von Chorus Date: Fri, 30 Dec 2016 14:07:52 -0500 Subject: [PATCH 125/645] thermal: core: move tz->device.groups cleanup to thermal_release The device_unregister call in thermal_zone_device_unregister causes the thermal_zone_device structure to be freed before the call to free the dynamically allocated attribute groups. This leads to a kernel panic. Furthermore, the 4 calls to free the trip point attribute structures occur before the call to unregister the device, leading to a kernel panic when sysfs attempts to access the attributes to remove them. Here is an example of a kernel panic when the cpu thermal zones are removed upon cpu offline: BUG: unable to handle kernel NULL pointer dereference at (null) IP: strlen+0x0/0x20 Call Trace: ? kernfs_name_hash+0x17/0x80 kernfs_find_ns+0x3f/0xd0 kernfs_remove_by_name_ns+0x36/0xa0 remove_files.isra.1+0x36/0x70 sysfs_remove_group+0x44/0x90 sysfs_remove_groups+0x2e/0x50 device_remove_attrs+0x5e/0x90 device_del+0x1ea/0x350 device_unregister+0x1a/0x60 thermal_zone_device_unregister+0x1f2/0x210 pkg_thermal_cpu_offline+0x14f/0x1a0 [x86_pkg_temp_thermal] ? kzalloc.constprop.2+0x10/0x10 [x86_pkg_temp_thermal] cpuhp_invoke_callback+0x8d/0x3f0 cpuhp_down_callbacks+0x42/0x80 cpuhp_thread_fun+0x8b/0xf0 smpboot_thread_fn+0x110/0x160 kthread+0x101/0x140 ? sort_range+0x30/0x30 ? kthread_park+0x90/0x90 ret_from_fork+0x25/0x30 This patch moves the kfree calls to clean up the dynamic attributes to the thermal_class's thermal_zone_device release function. Cc: Zhang Rui Cc: Eduardo Valentin Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Yasuaki Ishimatsu Signed-off-by: Jacob von Chorus Signed-off-by: Zhang Rui --- drivers/thermal/thermal_core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 641faab6e24b..655591316a88 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -799,6 +799,11 @@ static void thermal_release(struct device *dev) if (!strncmp(dev_name(dev), "thermal_zone", sizeof("thermal_zone") - 1)) { tz = to_thermal_zone(dev); + kfree(tz->trip_type_attrs); + kfree(tz->trip_temp_attrs); + kfree(tz->trip_hyst_attrs); + kfree(tz->trips_attribute_group.attrs); + kfree(tz->device.groups); kfree(tz); } else if (!strncmp(dev_name(dev), "cooling_device", sizeof("cooling_device") - 1)) { @@ -1305,10 +1310,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) thermal_zone_device_set_polling(tz, 0); - kfree(tz->trip_type_attrs); - kfree(tz->trip_temp_attrs); - kfree(tz->trip_hyst_attrs); - kfree(tz->trips_attribute_group.attrs); thermal_set_governor(tz, NULL); thermal_remove_hwmon_sysfs(tz); @@ -1316,7 +1317,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) idr_destroy(&tz->idr); mutex_destroy(&tz->lock); device_unregister(&tz->device); - kfree(tz->device.groups); } EXPORT_SYMBOL_GPL(thermal_zone_device_unregister); From a33d331761bc5dd330499ca5ceceb67f0640a8e6 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 5 Jan 2017 10:26:38 +0100 Subject: [PATCH 126/645] x86/CPU/AMD: Fix Bulldozer topology The following commit: 8196dab4fc15 ("x86/cpu: Get rid of compute_unit_id") ... broke the initial strategy for Bulldozer-based cores' topology, where we consider each thread of a compute unit a standalone core and not a HT or SMT thread. Revert to the firmware-supplied core_id numbering and do not make them thread siblings as we don't consider them for such even if they technically are, more or less. Reported-and-tested-by: Brice Goglin Tested-by: Yazen Ghannam Signed-off-by: Borislav Petkov Cc: # v4.6+ Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 8196dab4fc15 ("x86/cpu: Get rid of compute_unit_id") Link: http://lkml.kernel.org/r/20170105092638.5247-1-bp@alien8.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 71cae73a5076..1d3167269a67 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -309,15 +309,8 @@ static void amd_get_topology(struct cpuinfo_x86 *c) /* get information required for multi-node processors */ if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { - u32 eax, ebx, ecx, edx; - cpuid(0x8000001e, &eax, &ebx, &ecx, &edx); - node_id = ecx & 7; - - /* get compute unit information */ - smp_num_siblings = ((ebx >> 8) & 3) + 1; - c->x86_max_cores /= smp_num_siblings; - c->cpu_core_id = ebx & 0xff; + node_id = cpuid_ecx(0x8000001e) & 7; /* * We may have multiple LLCs if L3 caches exist, so check if we From 1ebb71143758f45dc0fa76e2f48429e13b16d110 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 6 Jan 2017 15:33:36 +0100 Subject: [PATCH 127/645] HID: hid-cypress: validate length of report Make sure we have enough of a report structure to validate before looking at it. Reported-by: Benoit Camredon Tested-by: Benoit Camredon Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jiri Kosina --- drivers/hid/hid-cypress.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/hid-cypress.c b/drivers/hid/hid-cypress.c index 1b764d1745f3..1689568b597d 100644 --- a/drivers/hid/hid-cypress.c +++ b/drivers/hid/hid-cypress.c @@ -39,6 +39,9 @@ static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc, if (!(quirks & CP_RDESC_SWAPPED_MIN_MAX)) return rdesc; + if (*rsize < 4) + return rdesc; + for (i = 0; i < *rsize - 4; i++) if (rdesc[i] == 0x29 && rdesc[i + 2] == 0x19) { rdesc[i] = 0x19; From 657279778af54f35e54b07b6687918f254a2992c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 3 Jan 2017 13:22:34 +0200 Subject: [PATCH 128/645] ARM: OMAP1: DMA: Correct the number of logical channels OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels. OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels available. The wired 17 for the lch_count must have been used to cover the 16 + 1 dedicated LCD channel, in reality we can only use 9 or 16 channels. The d->chan_count is not used by the omap-dma stack, so we can skip the setup. chan_count was configured to the number of logical channels and not the actual number of physical channels anyways. Signed-off-by: Peter Ujfalusi Acked-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/dma.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index f6ba589cd312..c821c1d5610e 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -32,7 +32,6 @@ #include "soc.h" #define OMAP1_DMA_BASE (0xfffed800) -#define OMAP1_LOGICAL_DMA_CH_COUNT 17 static u32 enable_1510_mode; @@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void) goto exit_iounmap; } - d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; - /* Valid attributes for omap1 plus processors */ if (cpu_is_omap15xx()) d->dev_caps = ENABLE_1510_MODE; @@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void) d->dev_caps |= CLEAR_CSR_ON_READ; d->dev_caps |= IS_WORD_16; - if (cpu_is_omap15xx()) - d->chan_count = 9; - else if (cpu_is_omap16xx() || cpu_is_omap7xx()) { - if (!(d->dev_caps & ENABLE_1510_MODE)) - d->chan_count = 16; + /* available logical channels */ + if (cpu_is_omap15xx()) { + d->lch_count = 9; + } else { + if (d->dev_caps & ENABLE_1510_MODE) + d->lch_count = 9; else - d->chan_count = 9; + d->lch_count = 16; } p = dma_plat_info; From bc65a326c579e93a5c2120a65ede72f11369ee5a Mon Sep 17 00:00:00 2001 From: Jeeja KP Date: Mon, 2 Jan 2017 09:50:05 +0530 Subject: [PATCH 129/645] ASoC: Intel: Skylake: Release FW ctx in cleanup Saved firmware ctx was not never released, so release Firmware ctx in cleanup routine. Signed-off-by: Jeeja KP Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c index 8fc3178bc79c..b30bd384c8d3 100644 --- a/sound/soc/intel/skylake/skl-sst.c +++ b/sound/soc/intel/skylake/skl-sst.c @@ -515,6 +515,9 @@ EXPORT_SYMBOL_GPL(skl_sst_init_fw); void skl_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx) { + + if (ctx->dsp->fw) + release_firmware(ctx->dsp->fw); skl_clear_module_table(ctx->dsp); skl_freeup_uuid_list(ctx); skl_ipc_free(&ctx->ipc); From 9f169b9f52a4afccdab7a7d2311b0c53a78a1e6b Mon Sep 17 00:00:00 2001 From: Patrick Lai Date: Sat, 31 Dec 2016 22:44:39 -0800 Subject: [PATCH 130/645] ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused When multiple front-ends are using the same back-end, putting state of a front-end to STOP state upon receiving pause command will result in backend stream getting released by DPCM framework unintentionally. In order to avoid backend to be released when another active front-end stream is present, put the stream state to PAUSED state instead of STOP state. Signed-off-by: Patrick Lai Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index e7a1eaa2772f..6aba14009c92 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2184,9 +2184,11 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: fe->dpcm[stream].state = SND_SOC_DPCM_STATE_STOP; break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PAUSED; + break; } out: From fd7c99142d77dc4a851879a66715abf12a3193fb Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Fri, 6 Jan 2017 17:54:51 +0000 Subject: [PATCH 131/645] tile/ptrace: Preserve previous registers for short regset write Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: stable@vger.kernel.org Signed-off-by: Dave Martin Signed-off-by: Chris Metcalf --- arch/tile/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c index d89b7011667c..e279572824b1 100644 --- a/arch/tile/kernel/ptrace.c +++ b/arch/tile/kernel/ptrace.c @@ -111,7 +111,7 @@ static int tile_gpr_set(struct task_struct *target, const void *kbuf, const void __user *ubuf) { int ret; - struct pt_regs regs; + struct pt_regs regs = *task_pt_regs(target); ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, ®s, 0, sizeof(regs)); From 978d3639fd13d987950e4ce85c8737ae92154b2c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 4 Jan 2017 22:18:24 +0300 Subject: [PATCH 132/645] sh_eth: fix EESIPR values for SH77{34|63} As the SH77{34|63} manuals are freely available, I've checked the EESIPR values written against the manuals, and they appeared to set the reserved bits 11-15 (which should be 0 on write). Fix those EESIPR values. Fixes: 380af9e390ec ("net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data"") Fixes: f5d12767c8fd ("sh_eth: get SH77{34|63} support out of #ifdef") Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 00fafabab1d0..3b388f5704c5 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -802,7 +802,7 @@ static struct sh_eth_cpu_data sh7734_data = { .ecsr_value = ECSR_ICD | ECSR_MPD, .ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP, - .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff, + .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003f07ff, .tx_check = EESR_TC1 | EESR_FTC, .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | @@ -832,7 +832,7 @@ static struct sh_eth_cpu_data sh7763_data = { .ecsr_value = ECSR_ICD | ECSR_MPD, .ecsipr_value = ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP, - .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff, + .eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003f07ff, .tx_check = EESR_TC1 | EESR_FTC, .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | From 0f1f9cbc04dbb3cc310f70a11cba0cf1f2109d9c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 5 Jan 2017 00:29:32 +0300 Subject: [PATCH 133/645] sh_eth: R8A7740 supports packet shecksumming The R8A7740 GEther controller supports the packet checksum offloading but the 'hw_crc' (bad name, I'll fix it) flag isn't set in the R8A7740 data, thus CSMR isn't cleared... Fixes: 73a0d907301e ("net: sh_eth: add support R8A7740") Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 3b388f5704c5..f729a6b43958 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -574,6 +574,7 @@ static struct sh_eth_cpu_data r8a7740_data = { .rpadir_value = 2 << 16, .no_trimd = 1, .no_ade = 1, + .hw_crc = 1, .tsu = 1, .select_mii = 1, .shift_rd0 = 1, From 896b4db685cf06bd7d50ed22c53ebd069e0b90e9 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Wed, 4 Jan 2017 15:07:16 -0600 Subject: [PATCH 134/645] amd-xgbe: Fix IRQ processing when running in single IRQ mode When running in single IRQ mode, the additional IRQ routines were being skipped because only the XGMAC interrupt status was being checked. Update the code so that the additional IRQ routines are checked whenever an interrupt is received. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c index 155190db682d..9943629fcbf9 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c @@ -539,6 +539,7 @@ static irqreturn_t xgbe_isr(int irq, void *data) } } +isr_done: /* If there is not a separate AN irq, handle it here */ if (pdata->dev_irq == pdata->an_irq) pdata->phy_if.an_isr(irq, pdata); @@ -551,7 +552,6 @@ static irqreturn_t xgbe_isr(int irq, void *data) if (pdata->vdata->i2c_support && (pdata->dev_irq == pdata->i2c_irq)) pdata->i2c_if.i2c_isr(irq, pdata); -isr_done: return IRQ_HANDLED; } From 5ca7d1ca77dc23934504b95a96d2660d345f83c2 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 5 Jan 2017 14:48:07 -0600 Subject: [PATCH 135/645] net: phy: dp83867: fix irq generation For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be programmed as an interrupt output instead of a Powerdown input in Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The current driver doesn't do this and as result IRQs will not be generated by DP83867 phy even if they are properly configured in DT. Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867 driver will work properly in interrupt enabled mode. Signed-off-by: Grygorii Strashko Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/dp83867.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 1b639242f9e2..e84ae084e259 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -29,6 +29,7 @@ #define MII_DP83867_MICR 0x12 #define MII_DP83867_ISR 0x13 #define DP83867_CTRL 0x1f +#define DP83867_CFG3 0x1e /* Extended Registers */ #define DP83867_RGMIICTL 0x0032 @@ -98,6 +99,8 @@ static int dp83867_config_intr(struct phy_device *phydev) micr_status |= (MII_DP83867_MICR_AN_ERR_INT_EN | MII_DP83867_MICR_SPEED_CHNG_INT_EN | + MII_DP83867_MICR_AUTONEG_COMP_INT_EN | + MII_DP83867_MICR_LINK_STS_CHNG_INT_EN | MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN | MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN); @@ -214,6 +217,13 @@ static int dp83867_config_init(struct phy_device *phydev) } } + /* Enable Interrupt output INT_OE in CFG3 register */ + if (phy_interrupt_is_valid(phydev)) { + val = phy_read(phydev, DP83867_CFG3); + val |= BIT(7); + phy_write(phydev, DP83867_CFG3, val); + } + return 0; } From 93e246f783e6bd1bc64fdfbfe68b18161f69b28e Mon Sep 17 00:00:00 2001 From: David Forster Date: Fri, 6 Jan 2017 10:27:59 +0000 Subject: [PATCH 136/645] vti6: fix device register to report IFLA_INFO_KIND vti6 interface is registered before the rtnl_link_ops block is attached. As a result the resulting RTM_NEWLINK is missing IFLA_INFO_KIND. Re-order attachment of rtnl_link_ops block to fix. Signed-off-by: Dave Forster Signed-off-by: David S. Miller --- net/ipv6/ip6_vti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index f4b4a4a5f4ba..d82042c8d8fd 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -189,12 +189,12 @@ static int vti6_tnl_create2(struct net_device *dev) struct vti6_net *ip6n = net_generic(net, vti6_net_id); int err; + dev->rtnl_link_ops = &vti6_link_ops; err = register_netdevice(dev); if (err < 0) goto out; strcpy(t->parms.name, dev->name); - dev->rtnl_link_ops = &vti6_link_ops; dev_hold(dev); vti6_tnl_link(ip6n, t); From 7f4c4f80fd22ec7722e778c1d099e828d2b5dc40 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 Dec 2016 13:30:13 -0500 Subject: [PATCH 137/645] MAINTAINERS: Update mailing list for radeon and amdgpu amdgpu and radeon development has moved to this list. Signed-off-by: Alex Deucher --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index c7b8cf1240d9..cb4611867a88 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4116,7 +4116,7 @@ F: drivers/gpu/drm/cirrus/ RADEON and AMDGPU DRM DRIVERS M: Alex Deucher M: Christian König -L: dri-devel@lists.freedesktop.org +L: amd-gfx@lists.freedesktop.org T: git git://people.freedesktop.org/~agd5f/linux S: Supported F: drivers/gpu/drm/radeon/ From c4642a479fac9f5c224ff7425d86c427b94011af Mon Sep 17 00:00:00 2001 From: Junwei Zhang Date: Wed, 14 Dec 2016 15:32:28 -0500 Subject: [PATCH 138/645] drm/amd/amdgpu: add Polaris12 support (v3) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit v2: agd: squash in various fixes v3: agd: squash in: drm/amdgpu: remove unnecessary smc sk firmware for polaris12 Signed-off-by: Junwei Zhang Reviewed-by: Alex Deucher Reviewed-by: Christian König Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 3 +++ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 ++ drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 5 ++++ drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 5 ++++ drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 13 ++++++--- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 31 ++++++++++++++++++---- drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 5 ++++ drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c | 6 +++++ drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 5 ++-- drivers/gpu/drm/amd/amdgpu/vi.c | 10 +++++++ drivers/gpu/drm/amd/include/amd_shared.h | 1 + 11 files changed, 76 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 9ada56c16a58..4c851fde1e82 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -840,6 +840,9 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, else if (type == CGS_UCODE_ID_SMU_SK) strcpy(fw_name, "amdgpu/polaris10_smc_sk.bin"); break; + case CHIP_POLARIS12: + strcpy(fw_name, "amdgpu/polaris12_smc.bin"); + break; default: DRM_ERROR("SMC firmware not supported\n"); return -EINVAL; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 60bd4afe45c8..fe3bb94fe58d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -73,6 +73,7 @@ static const char *amdgpu_asic_name[] = { "STONEY", "POLARIS10", "POLARIS11", + "POLARIS12", "LAST", }; @@ -1277,6 +1278,7 @@ static int amdgpu_early_init(struct amdgpu_device *adev) case CHIP_FIJI: case CHIP_POLARIS11: case CHIP_POLARIS10: + case CHIP_POLARIS12: case CHIP_CARRIZO: case CHIP_STONEY: if (adev->asic_type == CHIP_CARRIZO || adev->asic_type == CHIP_STONEY) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index a81dfaeeb8c0..1d564beb0fde 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -65,6 +65,7 @@ #define FIRMWARE_STONEY "amdgpu/stoney_uvd.bin" #define FIRMWARE_POLARIS10 "amdgpu/polaris10_uvd.bin" #define FIRMWARE_POLARIS11 "amdgpu/polaris11_uvd.bin" +#define FIRMWARE_POLARIS12 "amdgpu/polaris12_uvd.bin" /** * amdgpu_uvd_cs_ctx - Command submission parser context @@ -98,6 +99,7 @@ MODULE_FIRMWARE(FIRMWARE_FIJI); MODULE_FIRMWARE(FIRMWARE_STONEY); MODULE_FIRMWARE(FIRMWARE_POLARIS10); MODULE_FIRMWARE(FIRMWARE_POLARIS11); +MODULE_FIRMWARE(FIRMWARE_POLARIS12); static void amdgpu_uvd_idle_work_handler(struct work_struct *work); @@ -149,6 +151,9 @@ int amdgpu_uvd_sw_init(struct amdgpu_device *adev) case CHIP_POLARIS11: fw_name = FIRMWARE_POLARIS11; break; + case CHIP_POLARIS12: + fw_name = FIRMWARE_POLARIS12; + break; default: return -EINVAL; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c index 69b66b9e7f57..8fec802d3908 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c @@ -52,6 +52,7 @@ #define FIRMWARE_STONEY "amdgpu/stoney_vce.bin" #define FIRMWARE_POLARIS10 "amdgpu/polaris10_vce.bin" #define FIRMWARE_POLARIS11 "amdgpu/polaris11_vce.bin" +#define FIRMWARE_POLARIS12 "amdgpu/polaris12_vce.bin" #ifdef CONFIG_DRM_AMDGPU_CIK MODULE_FIRMWARE(FIRMWARE_BONAIRE); @@ -66,6 +67,7 @@ MODULE_FIRMWARE(FIRMWARE_FIJI); MODULE_FIRMWARE(FIRMWARE_STONEY); MODULE_FIRMWARE(FIRMWARE_POLARIS10); MODULE_FIRMWARE(FIRMWARE_POLARIS11); +MODULE_FIRMWARE(FIRMWARE_POLARIS12); static void amdgpu_vce_idle_work_handler(struct work_struct *work); @@ -121,6 +123,9 @@ int amdgpu_vce_sw_init(struct amdgpu_device *adev, unsigned long size) case CHIP_POLARIS11: fw_name = FIRMWARE_POLARIS11; break; + case CHIP_POLARIS12: + fw_name = FIRMWARE_POLARIS12; + break; default: return -EINVAL; diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c index b3d62b909f43..2006abbbfb62 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -167,6 +167,7 @@ static void dce_v11_0_init_golden_registers(struct amdgpu_device *adev) (const u32)ARRAY_SIZE(stoney_golden_settings_a11)); break; case CHIP_POLARIS11: + case CHIP_POLARIS12: amdgpu_program_register_sequence(adev, polaris11_golden_settings_a11, (const u32)ARRAY_SIZE(polaris11_golden_settings_a11)); @@ -608,6 +609,7 @@ static int dce_v11_0_get_num_crtc (struct amdgpu_device *adev) num_crtc = 6; break; case CHIP_POLARIS11: + case CHIP_POLARIS12: num_crtc = 5; break; default: @@ -1589,6 +1591,7 @@ static int dce_v11_0_audio_init(struct amdgpu_device *adev) adev->mode_info.audio.num_pins = 8; break; case CHIP_POLARIS11: + case CHIP_POLARIS12: adev->mode_info.audio.num_pins = 6; break; default: @@ -2388,7 +2391,8 @@ static u32 dce_v11_0_pick_pll(struct drm_crtc *crtc) int pll; if ((adev->asic_type == CHIP_POLARIS10) || - (adev->asic_type == CHIP_POLARIS11)) { + (adev->asic_type == CHIP_POLARIS11) || + (adev->asic_type == CHIP_POLARIS12)) { struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(amdgpu_crtc->encoder); struct amdgpu_encoder_atom_dig *dig = amdgpu_encoder->enc_priv; @@ -2822,7 +2826,8 @@ static int dce_v11_0_crtc_mode_set(struct drm_crtc *crtc, return -EINVAL; if ((adev->asic_type == CHIP_POLARIS10) || - (adev->asic_type == CHIP_POLARIS11)) { + (adev->asic_type == CHIP_POLARIS11) || + (adev->asic_type == CHIP_POLARIS12)) { struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(amdgpu_crtc->encoder); int encoder_mode = @@ -2992,6 +2997,7 @@ static int dce_v11_0_early_init(void *handle) adev->mode_info.num_dig = 6; break; case CHIP_POLARIS11: + case CHIP_POLARIS12: adev->mode_info.num_hpd = 5; adev->mode_info.num_dig = 5; break; @@ -3101,7 +3107,8 @@ static int dce_v11_0_hw_init(void *handle) amdgpu_atombios_crtc_powergate_init(adev); amdgpu_atombios_encoder_init_dig(adev); if ((adev->asic_type == CHIP_POLARIS10) || - (adev->asic_type == CHIP_POLARIS11)) { + (adev->asic_type == CHIP_POLARIS11) || + (adev->asic_type == CHIP_POLARIS12)) { amdgpu_atombios_crtc_set_dce_clock(adev, adev->clock.default_dispclk, DCE_CLOCK_TYPE_DISPCLK, ATOM_GCK_DFS); amdgpu_atombios_crtc_set_dce_clock(adev, 0, diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index d0ec00986f38..373374164bd5 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -139,6 +139,13 @@ MODULE_FIRMWARE("amdgpu/polaris10_mec.bin"); MODULE_FIRMWARE("amdgpu/polaris10_mec2.bin"); MODULE_FIRMWARE("amdgpu/polaris10_rlc.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_ce.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_pfp.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_me.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_mec.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_mec2.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_rlc.bin"); + static const struct amdgpu_gds_reg_offset amdgpu_gds_reg_offset[] = { {mmGDS_VMID0_BASE, mmGDS_VMID0_SIZE, mmGDS_GWS_VMID0, mmGDS_OA_VMID0}, @@ -689,6 +696,7 @@ static void gfx_v8_0_init_golden_registers(struct amdgpu_device *adev) (const u32)ARRAY_SIZE(tonga_golden_common_all)); break; case CHIP_POLARIS11: + case CHIP_POLARIS12: amdgpu_program_register_sequence(adev, golden_settings_polaris11_a11, (const u32)ARRAY_SIZE(golden_settings_polaris11_a11)); @@ -903,6 +911,9 @@ static int gfx_v8_0_init_microcode(struct amdgpu_device *adev) case CHIP_POLARIS10: chip_name = "polaris10"; break; + case CHIP_POLARIS12: + chip_name = "polaris12"; + break; case CHIP_STONEY: chip_name = "stoney"; break; @@ -1768,6 +1779,7 @@ static int gfx_v8_0_gpu_early_init(struct amdgpu_device *adev) gb_addr_config = TONGA_GB_ADDR_CONFIG_GOLDEN; break; case CHIP_POLARIS11: + case CHIP_POLARIS12: ret = amdgpu_atombios_get_gfx_info(adev); if (ret) return ret; @@ -2682,6 +2694,7 @@ static void gfx_v8_0_tiling_mode_table_init(struct amdgpu_device *adev) break; case CHIP_POLARIS11: + case CHIP_POLARIS12: modearray[0] = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) | PIPE_CONFIG(ADDR_SURF_P4_16x16) | TILE_SPLIT(ADDR_SURF_TILE_SPLIT_64B) | @@ -3503,6 +3516,7 @@ gfx_v8_0_raster_config(struct amdgpu_device *adev, u32 *rconf, u32 *rconf1) *rconf1 |= 0x0; break; case CHIP_POLARIS11: + case CHIP_POLARIS12: *rconf |= RB_MAP_PKR0(2) | RB_XSEL2(1) | SE_MAP(2) | SE_XSEL(1) | SE_YSEL(1); *rconf1 |= 0x0; @@ -4021,7 +4035,8 @@ static void gfx_v8_0_init_pg(struct amdgpu_device *adev) cz_enable_cp_power_gating(adev, true); else cz_enable_cp_power_gating(adev, false); - } else if (adev->asic_type == CHIP_POLARIS11) { + } else if ((adev->asic_type == CHIP_POLARIS11) || + (adev->asic_type == CHIP_POLARIS12)) { gfx_v8_0_init_csb(adev); gfx_v8_0_init_save_restore_list(adev); gfx_v8_0_enable_save_restore_machine(adev); @@ -4095,7 +4110,8 @@ static int gfx_v8_0_rlc_resume(struct amdgpu_device *adev) RLC_CGCG_CGLS_CTRL__CGLS_EN_MASK); WREG32(mmRLC_CGCG_CGLS_CTRL, tmp); if (adev->asic_type == CHIP_POLARIS11 || - adev->asic_type == CHIP_POLARIS10) { + adev->asic_type == CHIP_POLARIS10 || + adev->asic_type == CHIP_POLARIS12) { tmp = RREG32(mmRLC_CGCG_CGLS_CTRL_3D); tmp &= ~0x3; WREG32(mmRLC_CGCG_CGLS_CTRL_3D, tmp); @@ -4283,6 +4299,7 @@ static int gfx_v8_0_cp_gfx_start(struct amdgpu_device *adev) amdgpu_ring_write(ring, 0x0000002A); break; case CHIP_POLARIS11: + case CHIP_POLARIS12: amdgpu_ring_write(ring, 0x16000012); amdgpu_ring_write(ring, 0x00000000); break; @@ -4664,7 +4681,8 @@ static int gfx_v8_0_cp_compute_resume(struct amdgpu_device *adev) (adev->asic_type == CHIP_FIJI) || (adev->asic_type == CHIP_STONEY) || (adev->asic_type == CHIP_POLARIS11) || - (adev->asic_type == CHIP_POLARIS10)) { + (adev->asic_type == CHIP_POLARIS10) || + (adev->asic_type == CHIP_POLARIS12)) { WREG32(mmCP_MEC_DOORBELL_RANGE_LOWER, AMDGPU_DOORBELL_KIQ << 2); WREG32(mmCP_MEC_DOORBELL_RANGE_UPPER, @@ -4700,7 +4718,8 @@ static int gfx_v8_0_cp_compute_resume(struct amdgpu_device *adev) mqd->cp_hqd_persistent_state = tmp; if (adev->asic_type == CHIP_STONEY || adev->asic_type == CHIP_POLARIS11 || - adev->asic_type == CHIP_POLARIS10) { + adev->asic_type == CHIP_POLARIS10 || + adev->asic_type == CHIP_POLARIS12) { tmp = RREG32(mmCP_ME1_PIPE3_INT_CNTL); tmp = REG_SET_FIELD(tmp, CP_ME1_PIPE3_INT_CNTL, GENERIC2_INT_ENABLE, 1); WREG32(mmCP_ME1_PIPE3_INT_CNTL, tmp); @@ -5279,7 +5298,8 @@ static int gfx_v8_0_late_init(void *handle) static void gfx_v8_0_enable_gfx_static_mg_power_gating(struct amdgpu_device *adev, bool enable) { - if (adev->asic_type == CHIP_POLARIS11) + if ((adev->asic_type == CHIP_POLARIS11) || + (adev->asic_type == CHIP_POLARIS12)) /* Send msg to SMU via Powerplay */ amdgpu_set_powergating_state(adev, AMD_IP_BLOCK_TYPE_SMC, @@ -5353,6 +5373,7 @@ static int gfx_v8_0_set_powergating_state(void *handle, gfx_v8_0_enable_gfx_dynamic_mg_power_gating(adev, false); break; case CHIP_POLARIS11: + case CHIP_POLARIS12: if ((adev->pg_flags & AMD_PG_SUPPORT_GFX_SMG) && enable) gfx_v8_0_enable_gfx_static_mg_power_gating(adev, true); else diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c index 0daac3a5be79..476bc9f1954b 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c @@ -46,6 +46,7 @@ static int gmc_v8_0_wait_for_idle(void *handle); MODULE_FIRMWARE("amdgpu/tonga_mc.bin"); MODULE_FIRMWARE("amdgpu/polaris11_mc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_mc.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_mc.bin"); static const u32 golden_settings_tonga_a11[] = { @@ -130,6 +131,7 @@ static void gmc_v8_0_init_golden_registers(struct amdgpu_device *adev) (const u32)ARRAY_SIZE(golden_settings_tonga_a11)); break; case CHIP_POLARIS11: + case CHIP_POLARIS12: amdgpu_program_register_sequence(adev, golden_settings_polaris11_a11, (const u32)ARRAY_SIZE(golden_settings_polaris11_a11)); @@ -225,6 +227,9 @@ static int gmc_v8_0_init_microcode(struct amdgpu_device *adev) case CHIP_POLARIS10: chip_name = "polaris10"; break; + case CHIP_POLARIS12: + chip_name = "polaris12"; + break; case CHIP_FIJI: case CHIP_CARRIZO: case CHIP_STONEY: diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c index 1170a64a3184..034ace79ed49 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c @@ -60,6 +60,8 @@ MODULE_FIRMWARE("amdgpu/polaris10_sdma.bin"); MODULE_FIRMWARE("amdgpu/polaris10_sdma1.bin"); MODULE_FIRMWARE("amdgpu/polaris11_sdma.bin"); MODULE_FIRMWARE("amdgpu/polaris11_sdma1.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_sdma.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_sdma1.bin"); static const u32 sdma_offsets[SDMA_MAX_INSTANCE] = @@ -206,6 +208,7 @@ static void sdma_v3_0_init_golden_registers(struct amdgpu_device *adev) (const u32)ARRAY_SIZE(golden_settings_tonga_a11)); break; case CHIP_POLARIS11: + case CHIP_POLARIS12: amdgpu_program_register_sequence(adev, golden_settings_polaris11_a11, (const u32)ARRAY_SIZE(golden_settings_polaris11_a11)); @@ -278,6 +281,9 @@ static int sdma_v3_0_init_microcode(struct amdgpu_device *adev) case CHIP_POLARIS10: chip_name = "polaris10"; break; + case CHIP_POLARIS12: + chip_name = "polaris12"; + break; case CHIP_CARRIZO: chip_name = "carrizo"; break; diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index 6b3293a1c7b8..5fb0b7f5c065 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -320,11 +320,12 @@ static unsigned vce_v3_0_get_harvest_config(struct amdgpu_device *adev) { u32 tmp; - /* Fiji, Stoney, Polaris10, Polaris11 are single pipe */ + /* Fiji, Stoney, Polaris10, Polaris11, Polaris12 are single pipe */ if ((adev->asic_type == CHIP_FIJI) || (adev->asic_type == CHIP_STONEY) || (adev->asic_type == CHIP_POLARIS10) || - (adev->asic_type == CHIP_POLARIS11)) + (adev->asic_type == CHIP_POLARIS11) || + (adev->asic_type == CHIP_POLARIS12)) return AMDGPU_VCE_HARVEST_VCE1; /* Tonga and CZ are dual or single pipe */ diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index bf088d6d9bf1..c2ac54f11341 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -88,6 +88,7 @@ MODULE_FIRMWARE("amdgpu/polaris10_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc_sk.bin"); MODULE_FIRMWARE("amdgpu/polaris11_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris11_smc_sk.bin"); +MODULE_FIRMWARE("amdgpu/polaris12_smc.bin"); /* * Indirect registers accessor @@ -312,6 +313,7 @@ static void vi_init_golden_registers(struct amdgpu_device *adev) break; case CHIP_POLARIS11: case CHIP_POLARIS10: + case CHIP_POLARIS12: default: break; } @@ -671,6 +673,7 @@ static int vi_read_register(struct amdgpu_device *adev, u32 se_num, case CHIP_TONGA: case CHIP_POLARIS11: case CHIP_POLARIS10: + case CHIP_POLARIS12: case CHIP_CARRIZO: case CHIP_STONEY: asic_register_table = cz_allowed_read_registers; @@ -994,6 +997,11 @@ static int vi_common_early_init(void *handle) adev->pg_flags = 0; adev->external_rev_id = adev->rev_id + 0x50; break; + case CHIP_POLARIS12: + adev->cg_flags = AMD_CG_SUPPORT_UVD_MGCG; + adev->pg_flags = 0; + adev->external_rev_id = adev->rev_id + 0x64; + break; case CHIP_CARRIZO: adev->cg_flags = AMD_CG_SUPPORT_UVD_MGCG | AMD_CG_SUPPORT_GFX_MGCG | @@ -1346,6 +1354,7 @@ static int vi_common_set_clockgating_state(void *handle, case CHIP_TONGA: case CHIP_POLARIS10: case CHIP_POLARIS11: + case CHIP_POLARIS12: vi_common_set_clockgating_state_by_smu(adev, state); default: break; @@ -1429,6 +1438,7 @@ int vi_set_ip_blocks(struct amdgpu_device *adev) break; case CHIP_POLARIS11: case CHIP_POLARIS10: + case CHIP_POLARIS12: amdgpu_ip_block_add(adev, &vi_common_ip_block); amdgpu_ip_block_add(adev, &gmc_v8_1_ip_block); amdgpu_ip_block_add(adev, &tonga_ih_ip_block); diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h index c02469ada9f1..5f59117109d7 100644 --- a/drivers/gpu/drm/amd/include/amd_shared.h +++ b/drivers/gpu/drm/amd/include/amd_shared.h @@ -46,6 +46,7 @@ enum amd_asic_type { CHIP_STONEY, CHIP_POLARIS10, CHIP_POLARIS11, + CHIP_POLARIS12, CHIP_LAST, }; From f4309526576db325264b6dc9ee150ee70b330a42 Mon Sep 17 00:00:00 2001 From: Junwei Zhang Date: Wed, 14 Dec 2016 15:40:48 -0500 Subject: [PATCH 139/645] drm/amdgpu/powerplay: add Polaris12 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Junwei Zhang Reviewed-by: Alex Deucher Reviewed-by: Christian König Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c | 1 + drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 3 ++- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c | 2 +- drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c | 1 + 4 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c index fc592c2b0e16..95a568df8551 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c @@ -98,6 +98,7 @@ static int amdgpu_pp_early_init(void *handle) switch (adev->asic_type) { case CHIP_POLARIS11: case CHIP_POLARIS10: + case CHIP_POLARIS12: case CHIP_TONGA: case CHIP_FIJI: case CHIP_TOPAZ: diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index dc6700aee18f..b03606405a53 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -95,6 +95,7 @@ int hwmgr_init(struct amd_pp_init *pp_init, struct pp_instance *handle) break; case CHIP_POLARIS11: case CHIP_POLARIS10: + case CHIP_POLARIS12: polaris_set_asic_special_caps(hwmgr); hwmgr->feature_mask &= ~(PP_UVD_HANDSHAKE_MASK); break; @@ -745,7 +746,7 @@ int polaris_set_asic_special_caps(struct pp_hwmgr *hwmgr) phm_cap_set(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_TablelessHardwareInterface); - if (hwmgr->chip_id == CHIP_POLARIS11) + if ((hwmgr->chip_id == CHIP_POLARIS11) || (hwmgr->chip_id == CHIP_POLARIS12)) phm_cap_set(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_SPLLShutdownSupport); return 0; diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c index 26477f0f09dc..6cd1287a7a8f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_powertune.c @@ -521,7 +521,7 @@ int smu7_enable_didt_config(struct pp_hwmgr *hwmgr) PP_ASSERT_WITH_CODE((result == 0), "DIDT Config failed.", return result); result = smu7_program_pt_config_registers(hwmgr, DIDTConfig_Polaris10); PP_ASSERT_WITH_CODE((result == 0), "DIDT Config failed.", return result); - } else if (hwmgr->chip_id == CHIP_POLARIS11) { + } else if ((hwmgr->chip_id == CHIP_POLARIS11) || (hwmgr->chip_id == CHIP_POLARIS12)) { result = smu7_program_pt_config_registers(hwmgr, GCCACConfig_Polaris11); PP_ASSERT_WITH_CODE((result == 0), "DIDT Config failed.", return result); result = smu7_program_pt_config_registers(hwmgr, DIDTConfig_Polaris11); diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c index e5812aa456f3..6e618aa20719 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/smumgr.c @@ -65,6 +65,7 @@ int smum_init(struct amd_pp_init *pp_init, struct pp_instance *handle) break; case CHIP_POLARIS11: case CHIP_POLARIS10: + case CHIP_POLARIS12: polaris10_smum_init(smumgr); break; default: From fc8e9c54699e42754094ff475da46440778d8f19 Mon Sep 17 00:00:00 2001 From: Junwei Zhang Date: Thu, 4 Aug 2016 12:54:22 +0800 Subject: [PATCH 140/645] drm/amd/amdgpu: add Polaris12 PCI ID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Junwei Zhang Reviewed-by: Alex Deucher Reviewed-by: Christian König Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 8cb937b2bfcc..2534adaebe30 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -418,6 +418,13 @@ static const struct pci_device_id pciidlist[] = { {0x1002, 0x67CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, {0x1002, 0x67CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, {0x1002, 0x67CF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, + /* Polaris12 */ + {0x1002, 0x6980, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, + {0x1002, 0x6981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, + {0x1002, 0x6985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, + {0x1002, 0x6986, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, + {0x1002, 0x6987, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, + {0x1002, 0x699F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, {0, 0, 0} }; From d6df71e125b4e4ab8932349ce81e09ef73304b91 Mon Sep 17 00:00:00 2001 From: Yintian Tao Date: Wed, 21 Dec 2016 14:32:21 +0800 Subject: [PATCH 141/645] drm/amdgpu: remove static integer for uvd pp state At two gpu core condition, static integer will cause that second gpu core uvd state setting will be directly skipped due to the first one setting Signed-off-by: Yintian Tao Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c b/drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c index a79e283590fb..6de6becce745 100644 --- a/drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c +++ b/drivers/gpu/drm/amd/amdgpu/uvd_v5_0.c @@ -791,15 +791,10 @@ static int uvd_v5_0_set_clockgating_state(void *handle, { struct amdgpu_device *adev = (struct amdgpu_device *)handle; bool enable = (state == AMD_CG_STATE_GATE) ? true : false; - static int curstate = -1; if (!(adev->cg_flags & AMD_CG_SUPPORT_UVD_MGCG)) return 0; - if (curstate == state) - return 0; - - curstate = state; if (enable) { /* wait for STATUS to clear */ if (uvd_v5_0_wait_for_idle(handle)) From 70fd80d6f7e37bf637331c682fafcce1112750ac Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 21 Dec 2016 17:44:59 +0800 Subject: [PATCH 142/645] drm/amd/powerplay: extend smu's response timeout time. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/amd_shared.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h index 5f59117109d7..85f358764bbc 100644 --- a/drivers/gpu/drm/amd/include/amd_shared.h +++ b/drivers/gpu/drm/amd/include/amd_shared.h @@ -23,7 +23,7 @@ #ifndef __AMD_SHARED_H__ #define __AMD_SHARED_H__ -#define AMD_MAX_USEC_TIMEOUT 100000 /* 100 ms */ +#define AMD_MAX_USEC_TIMEOUT 200000 /* 200 ms */ /* * Supported ASIC types From 5165484b02f2cbedb5bf3a41ff5e8ae16069016c Mon Sep 17 00:00:00 2001 From: Flora Cui Date: Thu, 15 Dec 2016 13:43:59 +0800 Subject: [PATCH 143/645] drm/amdgpu: update si kicker smc firmware Use the appropriate smc firmware for each chip revision. Using the wrong one can cause stability issues. Acked-by: Edward O'Callaghan Signed-off-by: Flora Cui Reviewed-by: Junwei Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 57 ++++++++++++++--------------- 1 file changed, 28 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 6c65a1a2de79..0566e9adaf8a 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -56,7 +56,6 @@ #define BIOS_SCRATCH_4 0x5cd MODULE_FIRMWARE("radeon/tahiti_smc.bin"); -MODULE_FIRMWARE("radeon/tahiti_k_smc.bin"); MODULE_FIRMWARE("radeon/pitcairn_smc.bin"); MODULE_FIRMWARE("radeon/pitcairn_k_smc.bin"); MODULE_FIRMWARE("radeon/verde_smc.bin"); @@ -7687,49 +7686,49 @@ static int si_dpm_init_microcode(struct amdgpu_device *adev) chip_name = "tahiti"; break; case CHIP_PITCAIRN: - if ((adev->pdev->revision == 0x81) || - (adev->pdev->device == 0x6810) || - (adev->pdev->device == 0x6811) || - (adev->pdev->device == 0x6816) || - (adev->pdev->device == 0x6817) || - (adev->pdev->device == 0x6806)) + if ((adev->pdev->revision == 0x81) && + ((adev->pdev->device == 0x6810) || + (adev->pdev->device == 0x6811))) chip_name = "pitcairn_k"; else chip_name = "pitcairn"; break; case CHIP_VERDE: - if ((adev->pdev->revision == 0x81) || - (adev->pdev->revision == 0x83) || - (adev->pdev->revision == 0x87) || - (adev->pdev->device == 0x6820) || - (adev->pdev->device == 0x6821) || - (adev->pdev->device == 0x6822) || - (adev->pdev->device == 0x6823) || - (adev->pdev->device == 0x682A) || - (adev->pdev->device == 0x682B)) + if (((adev->pdev->device == 0x6820) && + ((adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83))) || + ((adev->pdev->device == 0x6821) && + ((adev->pdev->revision == 0x83) || + (adev->pdev->revision == 0x87))) || + ((adev->pdev->revision == 0x87) && + ((adev->pdev->device == 0x6823) || + (adev->pdev->device == 0x682b)))) chip_name = "verde_k"; else chip_name = "verde"; break; case CHIP_OLAND: - if ((adev->pdev->revision == 0xC7) || - (adev->pdev->revision == 0x80) || - (adev->pdev->revision == 0x81) || - (adev->pdev->revision == 0x83) || - (adev->pdev->revision == 0x87) || - (adev->pdev->device == 0x6604) || - (adev->pdev->device == 0x6605)) + if (((adev->pdev->revision == 0x81) && + ((adev->pdev->device == 0x6600) || + (adev->pdev->device == 0x6604) || + (adev->pdev->device == 0x6605) || + (adev->pdev->device == 0x6610))) || + ((adev->pdev->revision == 0x83) && + (adev->pdev->device == 0x6610))) chip_name = "oland_k"; else chip_name = "oland"; break; case CHIP_HAINAN: - if ((adev->pdev->revision == 0x81) || - (adev->pdev->revision == 0x83) || - (adev->pdev->revision == 0xC3) || - (adev->pdev->device == 0x6664) || - (adev->pdev->device == 0x6665) || - (adev->pdev->device == 0x6667)) + if (((adev->pdev->revision == 0x81) && + (adev->pdev->device == 0x6660)) || + ((adev->pdev->revision == 0x83) && + ((adev->pdev->device == 0x6660) || + (adev->pdev->device == 0x6663) || + (adev->pdev->device == 0x6665) || + (adev->pdev->device == 0x6667))) || + ((adev->pdev->revision == 0xc3) && + (adev->pdev->device == 0x6665))) chip_name = "hainan_k"; else chip_name = "hainan"; From 6458bd4dfd9414cba5804eb9907fe2a824278c34 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Jan 2017 12:15:52 -0500 Subject: [PATCH 144/645] drm/radeon: update smc firmware selection for SI Use the appropriate smc firmware for each chip revision. Using the wrong one can cause stability issues. Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si.c | 60 +++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index ad4d7b8b8322..e8a38d296855 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -50,7 +50,6 @@ MODULE_FIRMWARE("radeon/tahiti_ce.bin"); MODULE_FIRMWARE("radeon/tahiti_mc.bin"); MODULE_FIRMWARE("radeon/tahiti_rlc.bin"); MODULE_FIRMWARE("radeon/tahiti_smc.bin"); -MODULE_FIRMWARE("radeon/tahiti_k_smc.bin"); MODULE_FIRMWARE("radeon/PITCAIRN_pfp.bin"); MODULE_FIRMWARE("radeon/PITCAIRN_me.bin"); @@ -1657,9 +1656,6 @@ static int si_init_microcode(struct radeon_device *rdev) switch (rdev->family) { case CHIP_TAHITI: chip_name = "TAHITI"; - /* XXX: figure out which Tahitis need the new ucode */ - if (0) - new_smc = true; new_chip_name = "tahiti"; pfp_req_size = SI_PFP_UCODE_SIZE * 4; me_req_size = SI_PM4_UCODE_SIZE * 4; @@ -1671,12 +1667,9 @@ static int si_init_microcode(struct radeon_device *rdev) break; case CHIP_PITCAIRN: chip_name = "PITCAIRN"; - if ((rdev->pdev->revision == 0x81) || - (rdev->pdev->device == 0x6810) || - (rdev->pdev->device == 0x6811) || - (rdev->pdev->device == 0x6816) || - (rdev->pdev->device == 0x6817) || - (rdev->pdev->device == 0x6806)) + if ((rdev->pdev->revision == 0x81) && + ((rdev->pdev->device == 0x6810) || + (rdev->pdev->device == 0x6811))) new_smc = true; new_chip_name = "pitcairn"; pfp_req_size = SI_PFP_UCODE_SIZE * 4; @@ -1689,15 +1682,15 @@ static int si_init_microcode(struct radeon_device *rdev) break; case CHIP_VERDE: chip_name = "VERDE"; - if ((rdev->pdev->revision == 0x81) || - (rdev->pdev->revision == 0x83) || - (rdev->pdev->revision == 0x87) || - (rdev->pdev->device == 0x6820) || - (rdev->pdev->device == 0x6821) || - (rdev->pdev->device == 0x6822) || - (rdev->pdev->device == 0x6823) || - (rdev->pdev->device == 0x682A) || - (rdev->pdev->device == 0x682B)) + if (((rdev->pdev->device == 0x6820) && + ((rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83))) || + ((rdev->pdev->device == 0x6821) && + ((rdev->pdev->revision == 0x83) || + (rdev->pdev->revision == 0x87))) || + ((rdev->pdev->revision == 0x87) && + ((rdev->pdev->device == 0x6823) || + (rdev->pdev->device == 0x682b)))) new_smc = true; new_chip_name = "verde"; pfp_req_size = SI_PFP_UCODE_SIZE * 4; @@ -1710,13 +1703,13 @@ static int si_init_microcode(struct radeon_device *rdev) break; case CHIP_OLAND: chip_name = "OLAND"; - if ((rdev->pdev->revision == 0xC7) || - (rdev->pdev->revision == 0x80) || - (rdev->pdev->revision == 0x81) || - (rdev->pdev->revision == 0x83) || - (rdev->pdev->revision == 0x87) || - (rdev->pdev->device == 0x6604) || - (rdev->pdev->device == 0x6605)) + if (((rdev->pdev->revision == 0x81) && + ((rdev->pdev->device == 0x6600) || + (rdev->pdev->device == 0x6604) || + (rdev->pdev->device == 0x6605) || + (rdev->pdev->device == 0x6610))) || + ((rdev->pdev->revision == 0x83) && + (rdev->pdev->device == 0x6610))) new_smc = true; new_chip_name = "oland"; pfp_req_size = SI_PFP_UCODE_SIZE * 4; @@ -1728,12 +1721,15 @@ static int si_init_microcode(struct radeon_device *rdev) break; case CHIP_HAINAN: chip_name = "HAINAN"; - if ((rdev->pdev->revision == 0x81) || - (rdev->pdev->revision == 0x83) || - (rdev->pdev->revision == 0xC3) || - (rdev->pdev->device == 0x6664) || - (rdev->pdev->device == 0x6665) || - (rdev->pdev->device == 0x6667)) + if (((rdev->pdev->revision == 0x81) && + (rdev->pdev->device == 0x6660)) || + ((rdev->pdev->revision == 0x83) && + ((rdev->pdev->device == 0x6660) || + (rdev->pdev->device == 0x6663) || + (rdev->pdev->device == 0x6665) || + (rdev->pdev->device == 0x6667))) || + ((rdev->pdev->revision == 0xc3) && + (rdev->pdev->device == 0x6665))) new_smc = true; new_chip_name = "hainan"; pfp_req_size = SI_PFP_UCODE_SIZE * 4; From 8a08403bcb39f5d0e733bcf59a8a74f16b538f6e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Jan 2017 12:39:01 -0500 Subject: [PATCH 145/645] drm/radeon: drop verde dpm quirks fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98897 https://bugs.launchpad.net/bugs/1651981 Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Cc: Adrian Fiergolski --- drivers/gpu/drm/radeon/si_dpm.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 8b5e697f2549..13ba73fd9b68 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -3008,19 +3008,6 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, (rdev->pdev->device == 0x6817) || (rdev->pdev->device == 0x6806)) max_mclk = 120000; - } else if (rdev->family == CHIP_VERDE) { - if ((rdev->pdev->revision == 0x81) || - (rdev->pdev->revision == 0x83) || - (rdev->pdev->revision == 0x87) || - (rdev->pdev->device == 0x6820) || - (rdev->pdev->device == 0x6821) || - (rdev->pdev->device == 0x6822) || - (rdev->pdev->device == 0x6823) || - (rdev->pdev->device == 0x682A) || - (rdev->pdev->device == 0x682B)) { - max_sclk = 75000; - max_mclk = 80000; - } } else if (rdev->family == CHIP_OLAND) { if ((rdev->pdev->revision == 0xC7) || (rdev->pdev->revision == 0x80) || From 7192c54a68013f6058b1bb505645fcd07015191c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Jan 2017 13:02:37 -0500 Subject: [PATCH 146/645] drm/amdgpu: drop verde dpm quirks Port of radeon change to amdgpu. Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 0566e9adaf8a..10bedfac27b8 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -3487,19 +3487,6 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, (adev->pdev->device == 0x6817) || (adev->pdev->device == 0x6806)) max_mclk = 120000; - } else if (adev->asic_type == CHIP_VERDE) { - if ((adev->pdev->revision == 0x81) || - (adev->pdev->revision == 0x83) || - (adev->pdev->revision == 0x87) || - (adev->pdev->device == 0x6820) || - (adev->pdev->device == 0x6821) || - (adev->pdev->device == 0x6822) || - (adev->pdev->device == 0x6823) || - (adev->pdev->device == 0x682A) || - (adev->pdev->device == 0x682B)) { - max_sclk = 75000; - max_mclk = 80000; - } } else if (adev->asic_type == CHIP_OLAND) { if ((adev->pdev->revision == 0xC7) || (adev->pdev->revision == 0x80) || From bcd5e1a49f0d54afd3c5411bed2f59996e1c53e4 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Fri, 6 Jan 2017 14:26:54 -0500 Subject: [PATCH 147/645] netlabel: add CALIPSO to the list of built-in protocols When we added CALIPSO support in Linux v4.8 we forgot to add it to the list of supported protocols with display at boot. Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- net/netlabel/netlabel_kapi.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index 28c56b95fb7f..ea7c67050792 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -1502,10 +1502,7 @@ static int __init netlbl_init(void) printk(KERN_INFO "NetLabel: Initializing\n"); printk(KERN_INFO "NetLabel: domain hash size = %u\n", (1 << NETLBL_DOMHSH_BITSIZE)); - printk(KERN_INFO "NetLabel: protocols =" - " UNLABELED" - " CIPSOv4" - "\n"); + printk(KERN_INFO "NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO\n"); ret_val = netlbl_domhsh_init(NETLBL_DOMHSH_BITSIZE); if (ret_val != 0) From 1d0f110a2c6c4bca3dbcc4b0e27f1e3dc2d44a2c Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 6 Jan 2017 20:30:02 +0100 Subject: [PATCH 148/645] be2net: fix accesses to unicast list Commit 988d44b "be2net: Avoid redundant addition of mac address in HW" introduced be_dev_mac_add & be_uc_mac_add helpers that incorrectly access adapter->uc_list as an array of bytes instead of an array of be_eth_addr. Consequently NIC is not filled with valid data so unicast filtering is broken. Cc: Sathya Perla Cc: Ajit Khaparde Cc: Sriharsha Basavapatna Cc: Somnath Kotur Fixes: 988d44b be2net: Avoid redundant addition of mac address in HW Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 225e9a4877d7..3510352866c2 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -275,8 +275,7 @@ static int be_dev_mac_add(struct be_adapter *adapter, u8 *mac) /* Check if mac has already been added as part of uc-list */ for (i = 0; i < adapter->uc_macs; i++) { - if (ether_addr_equal((u8 *)&adapter->uc_list[i * ETH_ALEN], - mac)) { + if (ether_addr_equal(adapter->uc_list[i].mac, mac)) { /* mac already added, skip addition */ adapter->pmac_id[0] = adapter->pmac_id[i + 1]; return 0; @@ -1655,14 +1654,12 @@ static void be_clear_mc_list(struct be_adapter *adapter) static int be_uc_mac_add(struct be_adapter *adapter, int uc_idx) { - if (ether_addr_equal((u8 *)&adapter->uc_list[uc_idx * ETH_ALEN], - adapter->dev_mac)) { + if (ether_addr_equal(adapter->uc_list[uc_idx].mac, adapter->dev_mac)) { adapter->pmac_id[uc_idx + 1] = adapter->pmac_id[0]; return 0; } - return be_cmd_pmac_add(adapter, - (u8 *)&adapter->uc_list[uc_idx * ETH_ALEN], + return be_cmd_pmac_add(adapter, adapter->uc_list[uc_idx].mac, adapter->if_handle, &adapter->pmac_id[uc_idx + 1], 0); } From 20b1e22d01a4b0b11d3a1066e9feb04be38607ec Mon Sep 17 00:00:00 2001 From: Nicolai Stange Date: Thu, 5 Jan 2017 13:51:29 +0100 Subject: [PATCH 149/645] x86/efi: Don't allocate memmap through memblock after mm_init() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the following commit: 4bc9f92e64c8 ("x86/efi-bgrt: Use efi_mem_reserve() to avoid copying image data") ... efi_bgrt_init() calls into the memblock allocator through efi_mem_reserve() => efi_arch_mem_reserve() *after* mm_init() has been called. Indeed, KASAN reports a bad read access later on in efi_free_boot_services(): BUG: KASAN: use-after-free in efi_free_boot_services+0xae/0x24c at addr ffff88022de12740 Read of size 4 by task swapper/0/0 page:ffffea0008b78480 count:0 mapcount:-127 mapping: (null) index:0x1 flags: 0x5fff8000000000() [...] Call Trace: dump_stack+0x68/0x9f kasan_report_error+0x4c8/0x500 kasan_report+0x58/0x60 __asan_load4+0x61/0x80 efi_free_boot_services+0xae/0x24c start_kernel+0x527/0x562 x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0x157/0x17a start_cpu+0x5/0x14 The instruction at the given address is the first read from the memmap's memory, i.e. the read of md->type in efi_free_boot_services(). Note that the writes earlier in efi_arch_mem_reserve() don't splat because they're done through early_memremap()ed addresses. So, after memblock is gone, allocations should be done through the "normal" page allocator. Introduce a helper, efi_memmap_alloc() for this. Use it from efi_arch_mem_reserve(), efi_free_boot_services() and, for the sake of consistency, from efi_fake_memmap() as well. Note that for the latter, the memmap allocations cease to be page aligned. This isn't needed though. Tested-by: Dan Williams Signed-off-by: Nicolai Stange Reviewed-by: Ard Biesheuvel Cc: # v4.9 Cc: Dave Young Cc: Linus Torvalds Cc: Matt Fleming Cc: Mika Penttilä Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: 4bc9f92e64c8 ("x86/efi-bgrt: Use efi_mem_reserve() to avoid copying image data") Link: http://lkml.kernel.org/r/20170105125130.2815-1-nicstange@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/quirks.c | 4 ++-- drivers/firmware/efi/fake_mem.c | 3 +-- drivers/firmware/efi/memmap.c | 38 +++++++++++++++++++++++++++++++++ include/linux/efi.h | 1 + 4 files changed, 42 insertions(+), 4 deletions(-) diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c index 10aca63a50d7..30031d5293c4 100644 --- a/arch/x86/platform/efi/quirks.c +++ b/arch/x86/platform/efi/quirks.c @@ -214,7 +214,7 @@ void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size) new_size = efi.memmap.desc_size * num_entries; - new_phys = memblock_alloc(new_size, 0); + new_phys = efi_memmap_alloc(num_entries); if (!new_phys) { pr_err("Could not allocate boot services memmap\n"); return; @@ -355,7 +355,7 @@ void __init efi_free_boot_services(void) } new_size = efi.memmap.desc_size * num_entries; - new_phys = memblock_alloc(new_size, 0); + new_phys = efi_memmap_alloc(num_entries); if (!new_phys) { pr_err("Failed to allocate new EFI memmap\n"); return; diff --git a/drivers/firmware/efi/fake_mem.c b/drivers/firmware/efi/fake_mem.c index 520a40e5e0e4..6c7d60c239b5 100644 --- a/drivers/firmware/efi/fake_mem.c +++ b/drivers/firmware/efi/fake_mem.c @@ -71,8 +71,7 @@ void __init efi_fake_memmap(void) } /* allocate memory for new EFI memmap */ - new_memmap_phy = memblock_alloc(efi.memmap.desc_size * new_nr_map, - PAGE_SIZE); + new_memmap_phy = efi_memmap_alloc(new_nr_map); if (!new_memmap_phy) return; diff --git a/drivers/firmware/efi/memmap.c b/drivers/firmware/efi/memmap.c index f03ddecd232b..78686443cb37 100644 --- a/drivers/firmware/efi/memmap.c +++ b/drivers/firmware/efi/memmap.c @@ -9,6 +9,44 @@ #include #include #include +#include +#include + +static phys_addr_t __init __efi_memmap_alloc_early(unsigned long size) +{ + return memblock_alloc(size, 0); +} + +static phys_addr_t __init __efi_memmap_alloc_late(unsigned long size) +{ + unsigned int order = get_order(size); + struct page *p = alloc_pages(GFP_KERNEL, order); + + if (!p) + return 0; + + return PFN_PHYS(page_to_pfn(p)); +} + +/** + * efi_memmap_alloc - Allocate memory for the EFI memory map + * @num_entries: Number of entries in the allocated map. + * + * Depending on whether mm_init() has already been invoked or not, + * either memblock or "normal" page allocation is used. + * + * Returns the physical address of the allocated memory map on + * success, zero on failure. + */ +phys_addr_t __init efi_memmap_alloc(unsigned int num_entries) +{ + unsigned long size = num_entries * efi.memmap.desc_size; + + if (slab_is_available()) + return __efi_memmap_alloc_late(size); + + return __efi_memmap_alloc_early(size); +} /** * __efi_memmap_init - Common code for mapping the EFI memory map diff --git a/include/linux/efi.h b/include/linux/efi.h index a07a476178cd..0c5420208c40 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -950,6 +950,7 @@ static inline efi_status_t efi_query_variable_store(u32 attributes, #endif extern void __iomem *efi_lookup_mapped_addr(u64 phys_addr); +extern phys_addr_t __init efi_memmap_alloc(unsigned int num_entries); extern int __init efi_memmap_init_early(struct efi_memory_map_data *data); extern int __init efi_memmap_init_late(phys_addr_t addr, unsigned long size); extern void __init efi_memmap_unmap(void); From 6052cd1af86f9833b6b0b60d5d4787c4a06d65ea Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 6 Jan 2017 21:59:30 +0100 Subject: [PATCH 150/645] be2net: fix unicast list filling The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead. Cc: Sathya Perla Cc: Ajit Khaparde Cc: Sriharsha Basavapatna Cc: Somnath Kotur Fixes: b717241 be2net: replace polling with sleeping in the FW completion path Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 3510352866c2..ec010ced6c99 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1695,9 +1695,8 @@ static void be_set_uc_list(struct be_adapter *adapter) } if (adapter->update_uc_list) { - i = 1; /* First slot is claimed by the Primary MAC */ - /* cache the uc-list in adapter array */ + i = 0; netdev_for_each_uc_addr(ha, netdev) { ether_addr_copy(adapter->uc_list[i].mac, ha->addr); i++; From f5992b72ebe0dde488fa8f706b887194020c66fc Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 6 Jan 2017 16:18:53 -0500 Subject: [PATCH 151/645] tg3: Fix race condition in tg3_get_stats64(). The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: Wang Yufen Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 185e9e047aa9..ae42de4fdddf 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -8720,11 +8720,14 @@ static void tg3_free_consistent(struct tg3 *tp) tg3_mem_rx_release(tp); tg3_mem_tx_release(tp); + /* Protect tg3_get_stats64() from reading freed tp->hw_stats. */ + tg3_full_lock(tp, 0); if (tp->hw_stats) { dma_free_coherent(&tp->pdev->dev, sizeof(struct tg3_hw_stats), tp->hw_stats, tp->stats_mapping); tp->hw_stats = NULL; } + tg3_full_unlock(tp); } /* From 9d5ecb09d525469abd1a10c096cb5a17206523f2 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Sat, 7 Jan 2017 00:26:33 +0100 Subject: [PATCH 152/645] bpf: change back to orig prog on too many passes If after too many passes still no image could be emitted, then swap back to the original program as we do in all other cases and don't use the one with blinding. Fixes: 959a75791603 ("bpf, x86: add support for constant blinding") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- arch/x86/net/bpf_jit_comp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index e76d1af60f7a..bb660e53cbd6 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -1172,6 +1172,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) set_memory_ro((unsigned long)header, header->pages); prog->bpf_func = (void *)image; prog->jited = 1; + } else { + prog = orig_prog; } out_addrs: From a2cd64f30140c5aebd9359f66c00c19d5c6bece6 Mon Sep 17 00:00:00 2001 From: "Kweh, Hock Leong" Date: Sat, 7 Jan 2017 17:32:03 +0800 Subject: [PATCH 153/645] net: stmmac: fix maxmtu assignment to be within valid range There is no checking valid value of maxmtu when getting it from device tree. This resolution added the checking condition to ensure the assignment is made within a valid range. Signed-off-by: Kweh, Hock Leong Reviewed-by: Andy Shevchenko Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 +++++++++- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 6 ++++++ 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 39eb7a65bb9f..a276a32d57f2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3319,8 +3319,16 @@ int stmmac_dvr_probe(struct device *device, ndev->max_mtu = JUMBO_LEN; else ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN); - if (priv->plat->maxmtu < ndev->max_mtu) + /* Will not overwrite ndev->max_mtu if plat->maxmtu > ndev->max_mtu + * as well as plat->maxmtu < ndev->min_mtu which is a invalid range. + */ + if ((priv->plat->maxmtu < ndev->max_mtu) && + (priv->plat->maxmtu >= ndev->min_mtu)) ndev->max_mtu = priv->plat->maxmtu; + else if (priv->plat->maxmtu < ndev->min_mtu) + netdev_warn(priv->dev, + "%s: warning: maxmtu having invalid value (%d)\n", + __func__, priv->plat->maxmtu); if (flow_ctrl) priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index a2831773431a..3da4737620cb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -89,6 +89,9 @@ static void stmmac_default_data(struct plat_stmmacenet_data *plat) /* Set default value for unicast filter entries */ plat->unicast_filter_entries = 1; + + /* Set the maxmtu to a default of JUMBO_LEN */ + plat->maxmtu = JUMBO_LEN; } static int quark_default_data(struct plat_stmmacenet_data *plat, @@ -126,6 +129,9 @@ static int quark_default_data(struct plat_stmmacenet_data *plat, /* Set default value for unicast filter entries */ plat->unicast_filter_entries = 1; + /* Set the maxmtu to a default of JUMBO_LEN */ + plat->maxmtu = JUMBO_LEN; + return 0; } From a4c61b92b3a4cbda35bb0251a5063a68f0861b2c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 7 Jan 2017 21:01:56 -0800 Subject: [PATCH 154/645] net: dsa: bcm_sf2: Do not clobber b53_switch_ops We make the bcm_sf2 driver override ds->ops which points to b53_switch_ops since b53_switch_alloc() did the assignent. This is all well and good until a second b53 switch comes in, and ends up using the bcm_sf2 operations. Make a proper local copy, substitute the ds->ops pointer and then override the operations. Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 9ec33b51a0ed..2f9f910c0e40 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -982,6 +982,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME; struct device_node *dn = pdev->dev.of_node; struct b53_platform_data *pdata; + struct dsa_switch_ops *ops; struct bcm_sf2_priv *priv; struct b53_device *dev; struct dsa_switch *ds; @@ -995,6 +996,10 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; + ops = devm_kzalloc(&pdev->dev, sizeof(*ops), GFP_KERNEL); + if (!ops) + return -ENOMEM; + dev = b53_switch_alloc(&pdev->dev, &bcm_sf2_io_ops, priv); if (!dev) return -ENOMEM; @@ -1014,6 +1019,8 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) ds = dev->ds; /* Override the parts that are non-standard wrt. normal b53 devices */ + memcpy(ops, ds->ops, sizeof(*ops)); + ds->ops = ops; ds->ops->get_tag_protocol = bcm_sf2_sw_get_tag_protocol; ds->ops->setup = bcm_sf2_sw_setup; ds->ops->get_phy_flags = bcm_sf2_sw_get_phy_flags; From 2cfe8f8290bd28cf1ee67db914a6e76cf8e6437b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 7 Jan 2017 21:01:57 -0800 Subject: [PATCH 155/645] net: dsa: bcm_sf2: Utilize nested MDIO read/write We are implementing a MDIO bus which is behind another one, so use the nested version of the accessors to get lockdep annotations correct. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 2f9f910c0e40..2ce7ae97ac91 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -393,7 +393,7 @@ static int bcm_sf2_sw_mdio_read(struct mii_bus *bus, int addr, int regnum) if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr)) return bcm_sf2_sw_indir_rw(priv, 1, addr, regnum, 0); else - return mdiobus_read(priv->master_mii_bus, addr, regnum); + return mdiobus_read_nested(priv->master_mii_bus, addr, regnum); } static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum, @@ -407,7 +407,7 @@ static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum, if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr)) bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val); else - mdiobus_write(priv->master_mii_bus, addr, regnum, val); + mdiobus_write_nested(priv->master_mii_bus, addr, regnum, val); return 0; } From 3e70c5d6ea510e38f612d07fa0fd7487277b7087 Mon Sep 17 00:00:00 2001 From: Nicolas Iooss Date: Mon, 26 Dec 2016 14:52:23 +0100 Subject: [PATCH 156/645] drm/i915/gvt: verify functions types in new_mmio_info() The current prototype of new_mmio_info() uses void* for parameters read and write, which are functions with precise calling conventions (argument types and return type). Write down these conventions in new_mmio_info() definition. This has been reported by the following warnings when clang is used to build the kernel: drivers/gpu/drm/i915/gvt/handlers.c:124:21: error: pointer type mismatch ('void *' and 'int (*)(struct intel_vgpu *, unsigned int, void *, unsigned int)') [-Werror,-Wpointer-type-mismatch] info->read = read ? read : intel_vgpu_default_mmio_read; ^ ~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gvt/handlers.c:125:23: error: pointer type mismatch ('void *' and 'int (*)(struct intel_vgpu *, unsigned int, void *, unsigned int)') [-Werror,-Wpointer-type-mismatch] info->write = write ? write : intel_vgpu_default_mmio_write; ^ ~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This allows the compiler to detect that sbi_ctl_mmio_write() returns a "bool" value instead of an expected "int" one. Fix this. Signed-off-by: Nicolas Iooss Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 522809710312..052e57124c0a 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -93,7 +93,8 @@ static void write_vreg(struct intel_vgpu *vgpu, unsigned int offset, static int new_mmio_info(struct intel_gvt *gvt, u32 offset, u32 flags, u32 size, u32 addr_mask, u32 ro_mask, u32 device, - void *read, void *write) + int (*read)(struct intel_vgpu *, unsigned int, void *, unsigned int), + int (*write)(struct intel_vgpu *, unsigned int, void *, unsigned int)) { struct intel_gvt_mmio_info *info, *p; u32 start, end, i; @@ -974,7 +975,7 @@ static int sbi_data_mmio_read(struct intel_vgpu *vgpu, unsigned int offset, return 0; } -static bool sbi_ctl_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, +static int sbi_ctl_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes) { u32 data; From a12010534d0984f91bc5bdcf9e27bd55e20d82da Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Tue, 27 Dec 2016 13:24:52 +0800 Subject: [PATCH 157/645] drm/i915/gvt: fix error handing of tlb_control emulation Return ealier for a invalid access, else it would false set tlb flag for RCS. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 052e57124c0a..e06d5f37bb92 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -1367,7 +1367,6 @@ static int ring_mode_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, static int gvt_reg_tlb_control_handler(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes) { - int rc = 0; unsigned int id = 0; write_vreg(vgpu, offset, p_data, bytes); @@ -1390,12 +1389,11 @@ static int gvt_reg_tlb_control_handler(struct intel_vgpu *vgpu, id = VECS; break; default: - rc = -EINVAL; - break; + return -EINVAL; } set_bit(id, (void *)vgpu->tlb_handle_pending); - return rc; + return 0; } static int ring_reset_ctl_write(struct intel_vgpu *vgpu, From 39762ad437f1149b904e6baeaf28824da34a89c1 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Tue, 27 Dec 2016 13:25:06 +0800 Subject: [PATCH 158/645] drm/i915/gvt: fix return value in mul_force_wake_write All mmio handlers should return a negetive value for failure, not 1. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index e06d5f37bb92..8cbaf1c83720 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -220,7 +220,7 @@ static int mul_force_wake_write(struct intel_vgpu *vgpu, default: /*should not hit here*/ gvt_err("invalid forcewake offset 0x%x\n", offset); - return 1; + return -EINVAL; } } else { ack_reg_offset = FORCEWAKE_ACK_HSW_REG; From 905a5035ebe79e89712cda0bed1887c73aa8e9bb Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 30 Dec 2016 14:10:53 +0800 Subject: [PATCH 159/645] drm/i915/gvt: always use readq and writeq The readq and writeq are already offered by drm_os_linux.h. So we can use them directly whithout dectecting their presence. This patch removed the duplicated code. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index 6c5fdf5b2ce2..a32e59de0eff 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -240,15 +240,8 @@ static inline int get_pse_type(int type) static u64 read_pte64(struct drm_i915_private *dev_priv, unsigned long index) { void __iomem *addr = (gen8_pte_t __iomem *)dev_priv->ggtt.gsm + index; - u64 pte; -#ifdef readq - pte = readq(addr); -#else - pte = ioread32(addr); - pte |= (u64)ioread32(addr + 4) << 32; -#endif - return pte; + return readq(addr); } static void write_pte64(struct drm_i915_private *dev_priv, @@ -256,12 +249,8 @@ static void write_pte64(struct drm_i915_private *dev_priv, { void __iomem *addr = (gen8_pte_t __iomem *)dev_priv->ggtt.gsm + index; -#ifdef writeq writeq(pte, addr); -#else - iowrite32((u32)pte, addr); - iowrite32(pte >> 32, addr + 4); -#endif + I915_WRITE(GFX_FLSH_CNTL_GEN6, GFX_FLSH_CNTL_EN); POSTING_READ(GFX_FLSH_CNTL_GEN6); } From 901a14b721feef1b37cfe6362ee103e135133677 Mon Sep 17 00:00:00 2001 From: Pei Zhang Date: Wed, 4 Jan 2017 22:32:23 +0800 Subject: [PATCH 160/645] drm/i915/gvt: print correct value for untracked mmio In function intel_vgpu_emulate_mmio_read, the untracked mmio register is dumped through kernel log, but the register value is not correct. This patch fixes this issue. V2: fix the fromat warning from checkpatch.pl. Signed-off-by: Pei Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/mmio.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/mmio.c b/drivers/gpu/drm/i915/gvt/mmio.c index 09c9450a1946..e60701397ac2 100644 --- a/drivers/gpu/drm/i915/gvt/mmio.c +++ b/drivers/gpu/drm/i915/gvt/mmio.c @@ -125,25 +125,12 @@ int intel_vgpu_emulate_mmio_read(struct intel_vgpu *vgpu, uint64_t pa, if (WARN_ON(!reg_is_mmio(gvt, offset + bytes - 1))) goto err; - mmio = intel_gvt_find_mmio_info(gvt, rounddown(offset, 4)); - if (!mmio && !vgpu->mmio.disable_warn_untrack) { - gvt_err("vgpu%d: read untracked MMIO %x len %d val %x\n", - vgpu->id, offset, bytes, *(u32 *)p_data); - - if (offset == 0x206c) { - gvt_err("------------------------------------------\n"); - gvt_err("vgpu%d: likely triggers a gfx reset\n", - vgpu->id); - gvt_err("------------------------------------------\n"); - vgpu->mmio.disable_warn_untrack = true; - } - } - if (!intel_gvt_mmio_is_unalign(gvt, offset)) { if (WARN_ON(!IS_ALIGNED(offset, bytes))) goto err; } + mmio = intel_gvt_find_mmio_info(gvt, rounddown(offset, 4)); if (mmio) { if (!intel_gvt_mmio_is_unalign(gvt, mmio->offset)) { if (WARN_ON(offset + bytes > mmio->offset + mmio->size)) @@ -152,9 +139,23 @@ int intel_vgpu_emulate_mmio_read(struct intel_vgpu *vgpu, uint64_t pa, goto err; } ret = mmio->read(vgpu, offset, p_data, bytes); - } else + } else { ret = intel_vgpu_default_mmio_read(vgpu, offset, p_data, bytes); + if (!vgpu->mmio.disable_warn_untrack) { + gvt_err("vgpu%d: read untracked MMIO %x(%dB) val %x\n", + vgpu->id, offset, bytes, *(u32 *)p_data); + + if (offset == 0x206c) { + gvt_err("------------------------------------------\n"); + gvt_err("vgpu%d: likely triggers a gfx reset\n", + vgpu->id); + gvt_err("------------------------------------------\n"); + vgpu->mmio.disable_warn_untrack = true; + } + } + } + if (ret) goto err; From 888530b57f88f2bc856f181479df732c9622fa22 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 5 Jan 2017 10:26:13 +0800 Subject: [PATCH 161/645] drm/i915/gvt: adjust high memory size for default vGPU type Previous high mem size initialized for vGPU type was too small which caused failure for some VMs. This trys to take minimal value of 384MB for each VM and enlarge default high mem size to make guest driver happy. Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/vgpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/vgpu.c b/drivers/gpu/drm/i915/gvt/vgpu.c index 536d2b9d5777..398abb98dd0a 100644 --- a/drivers/gpu/drm/i915/gvt/vgpu.c +++ b/drivers/gpu/drm/i915/gvt/vgpu.c @@ -177,7 +177,7 @@ int intel_gvt_init_vgpu_types(struct intel_gvt *gvt) if (low_avail / min_low == 0) break; gvt->types[i].low_gm_size = min_low; - gvt->types[i].high_gm_size = 3 * gvt->types[i].low_gm_size; + gvt->types[i].high_gm_size = max((min_low<<3), MB_TO_BYTES(384U)); gvt->types[i].fence = 4; gvt->types[i].max_instance = low_avail / min_low; gvt->types[i].avail_instance = gvt->types[i].max_instance; @@ -217,7 +217,7 @@ static void intel_gvt_update_vgpu_types(struct intel_gvt *gvt) */ low_gm_avail = MB_TO_BYTES(256) - HOST_LOW_GM_SIZE - gvt->gm.vgpu_allocated_low_gm_size; - high_gm_avail = MB_TO_BYTES(256) * 3 - HOST_HIGH_GM_SIZE - + high_gm_avail = MB_TO_BYTES(256) * 8UL - HOST_HIGH_GM_SIZE - gvt->gm.vgpu_allocated_high_gm_size; fence_avail = gvt_fence_sz(gvt) - HOST_FENCE - gvt->fence.vgpu_allocated_fence_num; From 2fcdb66364ee467d69228a3d2ea074498c177211 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 5 Jan 2017 10:26:24 +0800 Subject: [PATCH 162/645] drm/i915/gvt: remove duplicated definition Remove duplicated definition for resource size in aperture_gm.c which are already defined in gvt.h. Need only one to take effect. Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/aperture_gm.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/aperture_gm.c b/drivers/gpu/drm/i915/gvt/aperture_gm.c index 0d41ebc4aea6..65200313515c 100644 --- a/drivers/gpu/drm/i915/gvt/aperture_gm.c +++ b/drivers/gpu/drm/i915/gvt/aperture_gm.c @@ -37,13 +37,6 @@ #include "i915_drv.h" #include "gvt.h" -#define MB_TO_BYTES(mb) ((mb) << 20ULL) -#define BYTES_TO_MB(b) ((b) >> 20ULL) - -#define HOST_LOW_GM_SIZE MB_TO_BYTES(128) -#define HOST_HIGH_GM_SIZE MB_TO_BYTES(384) -#define HOST_FENCE 4 - static int alloc_gm(struct intel_vgpu *vgpu, bool high_gm) { struct intel_gvt *gvt = vgpu->gvt; From 2e51ef32b0d66fcd5fe45c437cf7c6aef8350746 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Thu, 5 Jan 2017 13:28:05 +0800 Subject: [PATCH 163/645] drm/i915/gvt: fix use after free for workload In the function workload_thread(), we invoke complete_current_workload() to cleanup the just processed workload (workload will be freed there). So we cannot access workload->req after that. This patch move complete_current_workload() afterward. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/scheduler.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index 4db242250235..c694dd039f3b 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -459,11 +459,11 @@ complete: gvt_dbg_sched("will complete workload %p\n, status: %d\n", workload, workload->status); - complete_current_workload(gvt, ring_id); - if (workload->req) i915_gem_request_put(fetch_and_zero(&workload->req)); + complete_current_workload(gvt, ring_id); + if (need_force_wake) intel_uncore_forcewake_put(gvt->dev_priv, FORCEWAKE_ALL); From 440a9b9fae37dfd7e4c7d76db34fada57f9afd92 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Thu, 5 Jan 2017 16:49:03 +0800 Subject: [PATCH 164/645] drm/i915/gvt: dec vgpu->running_workload_num after the workload is really done The vgpu->running_workload_num is used to determine whether a vgpu has any workload running or not. So we should make sure the workload is really done before we dec running_workload_num. Function complete_current_workload is not the right place to do it, since this function is still processing the workload. This patch move the dec op afterward. v2: move dec op before wake_up(&scheduler->workload_complete_wq) (Min He) Signed-off-by: Changbin Du Reviewed-by: Min He Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/scheduler.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index c694dd039f3b..e91885dffeff 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -350,13 +350,15 @@ static void complete_current_workload(struct intel_gvt *gvt, int ring_id) { struct intel_gvt_workload_scheduler *scheduler = &gvt->scheduler; struct intel_vgpu_workload *workload; + struct intel_vgpu *vgpu; int event; mutex_lock(&gvt->lock); workload = scheduler->current_workload[ring_id]; + vgpu = workload->vgpu; - if (!workload->status && !workload->vgpu->resetting) { + if (!workload->status && !vgpu->resetting) { wait_event(workload->shadow_ctx_status_wq, !atomic_read(&workload->shadow_ctx_active)); @@ -364,8 +366,7 @@ static void complete_current_workload(struct intel_gvt *gvt, int ring_id) for_each_set_bit(event, workload->pending_events, INTEL_GVT_EVENT_MAX) - intel_vgpu_trigger_virtual_event(workload->vgpu, - event); + intel_vgpu_trigger_virtual_event(vgpu, event); } gvt_dbg_sched("ring id %d complete workload %p status %d\n", @@ -373,11 +374,10 @@ static void complete_current_workload(struct intel_gvt *gvt, int ring_id) scheduler->current_workload[ring_id] = NULL; - atomic_dec(&workload->vgpu->running_workload_num); - list_del_init(&workload->list); workload->complete(workload); + atomic_dec(&vgpu->running_workload_num); wake_up(&scheduler->workload_complete_wq); mutex_unlock(&gvt->lock); } From 59c0573dfbd5f66e3aa54c2ce0bebcb0953d4db4 Mon Sep 17 00:00:00 2001 From: Jike Song Date: Fri, 6 Jan 2017 15:16:21 +0800 Subject: [PATCH 165/645] drm/i915/gvt: init/destroy vgpu_idr properly An idr should be initialized before use and destroyed afterwards. Signed-off-by: Jike Song Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gvt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/gvt.c b/drivers/gpu/drm/i915/gvt/gvt.c index 398877c3d2fd..e6bf5c533fbe 100644 --- a/drivers/gpu/drm/i915/gvt/gvt.c +++ b/drivers/gpu/drm/i915/gvt/gvt.c @@ -201,6 +201,8 @@ void intel_gvt_clean_device(struct drm_i915_private *dev_priv) intel_gvt_hypervisor_host_exit(&dev_priv->drm.pdev->dev, gvt); intel_gvt_clean_vgpu_types(gvt); + idr_destroy(&gvt->vgpu_idr); + kfree(dev_priv->gvt); dev_priv->gvt = NULL; } @@ -237,6 +239,8 @@ int intel_gvt_init_device(struct drm_i915_private *dev_priv) gvt_dbg_core("init gvt device\n"); + idr_init(&gvt->vgpu_idr); + mutex_init(&gvt->lock); gvt->dev_priv = dev_priv; @@ -244,7 +248,7 @@ int intel_gvt_init_device(struct drm_i915_private *dev_priv) ret = intel_gvt_setup_mmio_info(gvt); if (ret) - return ret; + goto out_clean_idr; ret = intel_gvt_load_firmware(gvt); if (ret) @@ -313,6 +317,8 @@ out_free_firmware: intel_gvt_free_firmware(gvt); out_clean_mmio_info: intel_gvt_clean_mmio_info(gvt); +out_clean_idr: + idr_destroy(&gvt->vgpu_idr); kfree(gvt); return ret; } From 4e5378918b5b96e6b93fcadf1ab84a8486ca60a1 Mon Sep 17 00:00:00 2001 From: Jike Song Date: Fri, 6 Jan 2017 15:16:22 +0800 Subject: [PATCH 166/645] drm/i915/gvt: destroy the allocated idr on vgpu creating failures Once idr_alloc gets called data is allocated within the idr list, if any error occurs afterwards, we should undo that by idr_remove on the error path. Signed-off-by: Jike Song Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/vgpu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/vgpu.c b/drivers/gpu/drm/i915/gvt/vgpu.c index 398abb98dd0a..f0e86123e45b 100644 --- a/drivers/gpu/drm/i915/gvt/vgpu.c +++ b/drivers/gpu/drm/i915/gvt/vgpu.c @@ -304,7 +304,7 @@ static struct intel_vgpu *__intel_gvt_create_vgpu(struct intel_gvt *gvt, ret = setup_vgpu_mmio(vgpu); if (ret) - goto out_free_vgpu; + goto out_clean_idr; ret = intel_vgpu_alloc_resource(vgpu, param); if (ret) @@ -355,6 +355,8 @@ out_clean_vgpu_resource: intel_vgpu_free_resource(vgpu); out_clean_vgpu_mmio: clean_vgpu_mmio(vgpu); +out_clean_idr: + idr_remove(&gvt->vgpu_idr, vgpu->id); out_free_vgpu: vfree(vgpu); mutex_unlock(&gvt->lock); From 03551e971f6e52c8dedd5741bf48631e65675759 Mon Sep 17 00:00:00 2001 From: Jike Song Date: Fri, 6 Jan 2017 15:16:23 +0800 Subject: [PATCH 167/645] drm/i915/gvt: cleanup opregion memory allocation code According to the spec, ACPI OpRegion must be placed at a physical address below 4G. That is, for a vGPU it must be associated with a GPA below 4G, but on host side, it doesn't matter where the backing pages actually are. So when allocating pages from host, the GFP_DMA32 flag is unnecessary. Also the allocation is from a sleepable context, so GFP_ATOMIC is also unnecessary. This patch also removes INTEL_GVT_OPREGION_PORDER and use get_order() instead. Signed-off-by: Jike Song Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/opregion.c | 8 ++++---- drivers/gpu/drm/i915/gvt/reg.h | 3 +-- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/opregion.c b/drivers/gpu/drm/i915/gvt/opregion.c index 81cd921770c6..d9fb41ab7119 100644 --- a/drivers/gpu/drm/i915/gvt/opregion.c +++ b/drivers/gpu/drm/i915/gvt/opregion.c @@ -36,9 +36,9 @@ static int init_vgpu_opregion(struct intel_vgpu *vgpu, u32 gpa) vgpu->id)) return -EINVAL; - vgpu_opregion(vgpu)->va = (void *)__get_free_pages(GFP_ATOMIC | - GFP_DMA32 | __GFP_ZERO, - INTEL_GVT_OPREGION_PORDER); + vgpu_opregion(vgpu)->va = (void *)__get_free_pages(GFP_KERNEL | + __GFP_ZERO, + get_order(INTEL_GVT_OPREGION_SIZE)); if (!vgpu_opregion(vgpu)->va) return -ENOMEM; @@ -97,7 +97,7 @@ void intel_vgpu_clean_opregion(struct intel_vgpu *vgpu) if (intel_gvt_host.hypervisor_type == INTEL_GVT_HYPERVISOR_XEN) { map_vgpu_opregion(vgpu, false); free_pages((unsigned long)vgpu_opregion(vgpu)->va, - INTEL_GVT_OPREGION_PORDER); + get_order(INTEL_GVT_OPREGION_SIZE)); vgpu_opregion(vgpu)->va = NULL; } diff --git a/drivers/gpu/drm/i915/gvt/reg.h b/drivers/gpu/drm/i915/gvt/reg.h index 0dfe789d8f02..fbd023a16f18 100644 --- a/drivers/gpu/drm/i915/gvt/reg.h +++ b/drivers/gpu/drm/i915/gvt/reg.h @@ -50,8 +50,7 @@ #define INTEL_GVT_OPREGION_PARM 0x204 #define INTEL_GVT_OPREGION_PAGES 2 -#define INTEL_GVT_OPREGION_PORDER 1 -#define INTEL_GVT_OPREGION_SIZE (2 * 4096) +#define INTEL_GVT_OPREGION_SIZE (INTEL_GVT_OPREGION_PAGES * PAGE_SIZE) #define VGT_SPRSTRIDE(pipe) _PIPE(pipe, _SPRA_STRIDE, _PLANE_STRIDE_2_B) From 5753394b64a07dd502cb288a5fd52e71fb01fc5d Mon Sep 17 00:00:00 2001 From: Jike Song Date: Fri, 6 Jan 2017 15:16:20 +0800 Subject: [PATCH 168/645] drm/i915/gvt/kvmgt: return meaningful error for vgpu creating failure The vgpu_create() routine we called returns meaningful errors to indicate failures, so we'd better to pass it to our caller, the mdev framework, whereby the sysfs is able to tell userspace what happened. Signed-off-by: Jike Song Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/kvmgt.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c index faaae07ae487..0c9234a87a20 100644 --- a/drivers/gpu/drm/i915/gvt/kvmgt.c +++ b/drivers/gpu/drm/i915/gvt/kvmgt.c @@ -398,6 +398,7 @@ static int intel_vgpu_create(struct kobject *kobj, struct mdev_device *mdev) struct intel_vgpu_type *type; struct device *pdev; void *gvt; + int ret; pdev = mdev_parent_dev(mdev); gvt = kdev_to_i915(pdev)->gvt; @@ -406,13 +407,15 @@ static int intel_vgpu_create(struct kobject *kobj, struct mdev_device *mdev) if (!type) { gvt_err("failed to find type %s to create\n", kobject_name(kobj)); - return -EINVAL; + ret = -EINVAL; + goto out; } vgpu = intel_gvt_ops->vgpu_create(gvt, type); if (IS_ERR_OR_NULL(vgpu)) { - gvt_err("create intel vgpu failed\n"); - return -EINVAL; + ret = vgpu == NULL ? -EFAULT : PTR_ERR(vgpu); + gvt_err("failed to create intel vgpu: %d\n", ret); + goto out; } INIT_WORK(&vgpu->vdev.release_work, intel_vgpu_release_work); @@ -422,7 +425,10 @@ static int intel_vgpu_create(struct kobject *kobj, struct mdev_device *mdev) gvt_dbg_core("intel_vgpu_create succeeded for mdev: %s\n", dev_name(mdev_dev(mdev))); - return 0; + ret = 0; + +out: + return ret; } static int intel_vgpu_remove(struct mdev_device *mdev) From f0a8b49c03d22a511a601dc54b2a3425a41e35fa Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 30 Dec 2016 10:57:46 +0100 Subject: [PATCH 169/645] drm/bridge: analogix dp: Fix runtime PM state on driver bind Analogix_dp_bind() can be called from component framework, which doesn't guarantee proper runtime PM state of the device during bind operation, so ensure that device is runtime active before doing any register access. This ensures that the power domain, to which DP module belongs, is turned on. While at it, also fix the unbalanced call to phy_power_on() in analogix_dp_bind() function. This patch solves the following kernel oops on Samsung Exynos5250 Snow board: Unhandled fault: imprecise external abort (0x406) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 75 Comm: kworker/0:2 Not tainted 4.9.0 #1046 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func task: ee272300 task.stack: ee312000 PC is at analogix_dp_enable_sw_function+0x18/0x2c LR is at analogix_dp_init_dp+0x2c/0x50 ... [] (analogix_dp_enable_sw_function) from [] (analogix_dp_init_dp+0x2c/0x50) [] (analogix_dp_init_dp) from [] (analogix_dp_bind+0x184/0x42c) [] (analogix_dp_bind) from [] (component_bind_all+0xf0/0x218) [] (component_bind_all) from [] (exynos_drm_load+0x134/0x200) [] (exynos_drm_load) from [] (drm_dev_register+0xa0/0xd0) [] (drm_dev_register) from [] (drm_platform_init+0x58/0xb0) [] (drm_platform_init) from [] (try_to_bring_up_master+0x14c/0x188) [] (try_to_bring_up_master) from [] (component_add+0x88/0x138) [] (component_add) from [] (platform_drv_probe+0x50/0xb0) [] (platform_drv_probe) from [] (driver_probe_device+0x1f0/0x2a8) [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [] (bus_for_each_drv) from [] (__device_attach+0x9c/0x100) [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x8c) [] (deferred_probe_work_func) from [] (process_one_work+0x120/0x318) [] (process_one_work) from [] (process_scheduled_works+0x28/0x38) [] (process_scheduled_works) from [] (worker_thread+0x204/0x4ac) [] (worker_thread) from [] (kthread+0xd8/0xf4) [] (kthread) from [] (ret_from_fork+0x14/0x3c) Code: e59035f0 e5935018 f57ff04f e3c55001 (f57ff04e) ---[ end trace 3d1d0d87796de344 ]--- Reviewed-by: Sean Paul Signed-off-by: Marek Szyprowski Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/1483091866-1088-1-git-send-email-m.szyprowski@samsung.com --- drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index eb9bf8786c24..18eefdcbf1ba 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -1382,6 +1382,7 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, pm_runtime_enable(dev); + pm_runtime_get_sync(dev); phy_power_on(dp->phy); analogix_dp_init_dp(dp); @@ -1414,9 +1415,15 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, goto err_disable_pm_runtime; } + phy_power_off(dp->phy); + pm_runtime_put(dev); + return 0; err_disable_pm_runtime: + + phy_power_off(dp->phy); + pm_runtime_put(dev); pm_runtime_disable(dev); return ret; From 9631739f8196ec80b5d9bf955f79b711490c0205 Mon Sep 17 00:00:00 2001 From: Jike Song Date: Mon, 9 Jan 2017 15:38:38 +0800 Subject: [PATCH 170/645] drm/i915/gvt: cleanup GFP flags In gvt, almost all memory allocations are in sleepable contexts. It's fault-prone to use GFP_ATOMIC everywhere. Replace it with GFP_KERNEL wherever possible. Signed-off-by: Jike Song Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 39 +++++++++++++--------------------- 1 file changed, 15 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index a32e59de0eff..3cf0df0bb391 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -1369,8 +1369,7 @@ static int gen8_mm_alloc_page_table(struct intel_vgpu_mm *mm) info->gtt_entry_size; mem = kzalloc(mm->has_shadow_page_table ? mm->page_table_entry_size * 2 - : mm->page_table_entry_size, - GFP_ATOMIC); + : mm->page_table_entry_size, GFP_KERNEL); if (!mem) return -ENOMEM; mm->virtual_page_table = mem; @@ -1521,7 +1520,7 @@ struct intel_vgpu_mm *intel_vgpu_create_mm(struct intel_vgpu *vgpu, struct intel_vgpu_mm *mm; int ret; - mm = kzalloc(sizeof(*mm), GFP_ATOMIC); + mm = kzalloc(sizeof(*mm), GFP_KERNEL); if (!mm) { ret = -ENOMEM; goto fail; @@ -1875,30 +1874,27 @@ static int alloc_scratch_pages(struct intel_vgpu *vgpu, struct intel_gvt_gtt_pte_ops *ops = vgpu->gvt->gtt.pte_ops; int page_entry_num = GTT_PAGE_SIZE >> vgpu->gvt->device_info.gtt_entry_size_shift; - struct page *scratch_pt; + void *scratch_pt; unsigned long mfn; int i; - void *p; if (WARN_ON(type < GTT_TYPE_PPGTT_PTE_PT || type >= GTT_TYPE_MAX)) return -EINVAL; - scratch_pt = alloc_page(GFP_KERNEL | GFP_ATOMIC | __GFP_ZERO); + scratch_pt = (void *)get_zeroed_page(GFP_KERNEL); if (!scratch_pt) { gvt_err("fail to allocate scratch page\n"); return -ENOMEM; } - p = kmap_atomic(scratch_pt); - mfn = intel_gvt_hypervisor_virt_to_mfn(p); + mfn = intel_gvt_hypervisor_virt_to_mfn(scratch_pt); if (mfn == INTEL_GVT_INVALID_ADDR) { - gvt_err("fail to translate vaddr:0x%llx\n", (u64)p); - kunmap_atomic(p); - __free_page(scratch_pt); + gvt_err("fail to translate vaddr:0x%lx\n", (unsigned long)scratch_pt); + free_page((unsigned long)scratch_pt); return -EFAULT; } gtt->scratch_pt[type].page_mfn = mfn; - gtt->scratch_pt[type].page = scratch_pt; + gtt->scratch_pt[type].page = virt_to_page(scratch_pt); gvt_dbg_mm("vgpu%d create scratch_pt: type %d mfn=0x%lx\n", vgpu->id, type, mfn); @@ -1907,7 +1903,7 @@ static int alloc_scratch_pages(struct intel_vgpu *vgpu, * scratch_pt[type] indicate the scratch pt/scratch page used by the * 'type' pt. * e.g. scratch_pt[GTT_TYPE_PPGTT_PDE_PT] is used by - * GTT_TYPE_PPGTT_PDE_PT level pt, that means this scatch_pt it self + * GTT_TYPE_PPGTT_PDE_PT level pt, that means this scratch_pt it self * is GTT_TYPE_PPGTT_PTE_PT, and full filled by scratch page mfn. */ if (type > GTT_TYPE_PPGTT_PTE_PT && type < GTT_TYPE_MAX) { @@ -1925,11 +1921,9 @@ static int alloc_scratch_pages(struct intel_vgpu *vgpu, se.val64 |= PPAT_CACHED_INDEX; for (i = 0; i < page_entry_num; i++) - ops->set_entry(p, &se, i, false, 0, vgpu); + ops->set_entry(scratch_pt, &se, i, false, 0, vgpu); } - kunmap_atomic(p); - return 0; } @@ -2197,7 +2191,7 @@ int intel_vgpu_g2v_destroy_ppgtt_mm(struct intel_vgpu *vgpu, int intel_gvt_init_gtt(struct intel_gvt *gvt) { int ret; - void *page_addr; + void *page; gvt_dbg_core("init gtt\n"); @@ -2210,17 +2204,14 @@ int intel_gvt_init_gtt(struct intel_gvt *gvt) return -ENODEV; } - gvt->gtt.scratch_ggtt_page = - alloc_page(GFP_KERNEL | GFP_ATOMIC | __GFP_ZERO); - if (!gvt->gtt.scratch_ggtt_page) { + page = (void *)get_zeroed_page(GFP_KERNEL); + if (!page) { gvt_err("fail to allocate scratch ggtt page\n"); return -ENOMEM; } + gvt->gtt.scratch_ggtt_page = virt_to_page(page); - page_addr = page_address(gvt->gtt.scratch_ggtt_page); - - gvt->gtt.scratch_ggtt_mfn = - intel_gvt_hypervisor_virt_to_mfn(page_addr); + gvt->gtt.scratch_ggtt_mfn = intel_gvt_hypervisor_virt_to_mfn(page); if (gvt->gtt.scratch_ggtt_mfn == INTEL_GVT_INVALID_ADDR) { gvt_err("fail to translate scratch ggtt page\n"); __free_page(gvt->gtt.scratch_ggtt_page); From eeb0d56fab4cd7848cf2be6704fa48900dbc1381 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 14 Dec 2016 16:47:43 +0100 Subject: [PATCH 171/645] mac80211: implement multicast forwarding on fast-RX path In AP (or VLAN) mode, when unicast 802.11 packets are received, they might actually be multicast after conversion. In this case the fast-RX path didn't handle them properly to send them back to the wireless medium. Implement that by copying the SKB and sending it back out. The possible alternative would be to just punt the packet back to the regular (slow) RX path, but since we have almost all of the required code here already it's not so complicated to add here. Punting it back would also mean acquiring the spinlock, which would be bad for the stated purpose of the fast-RX path, to enable well-performing parallel RX. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 3e289a64ed43..c037c5bb6167 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -3942,21 +3942,31 @@ static bool ieee80211_invoke_fast_rx(struct ieee80211_rx_data *rx, u64_stats_update_end(&stats->syncp); if (fast_rx->internal_forward) { - struct sta_info *dsta = sta_info_get(rx->sdata, skb->data); + struct sk_buff *xmit_skb = NULL; + bool multicast = is_multicast_ether_addr(skb->data); - if (dsta) { + if (multicast) { + xmit_skb = skb_copy(skb, GFP_ATOMIC); + } else if (sta_info_get(rx->sdata, skb->data)) { + xmit_skb = skb; + skb = NULL; + } + + if (xmit_skb) { /* * Send to wireless media and increase priority by 256 * to keep the received priority instead of * reclassifying the frame (see cfg80211_classify8021d). */ - skb->priority += 256; - skb->protocol = htons(ETH_P_802_3); - skb_reset_network_header(skb); - skb_reset_mac_header(skb); - dev_queue_xmit(skb); - return true; + xmit_skb->priority += 256; + xmit_skb->protocol = htons(ETH_P_802_3); + skb_reset_network_header(xmit_skb); + skb_reset_mac_header(xmit_skb); + dev_queue_xmit(xmit_skb); } + + if (!skb) + return true; } /* deliver to local stack */ From ac0c7cf8be00f269f82964cf7b144ca3edc5dbc4 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 6 Jan 2017 14:12:51 +0100 Subject: [PATCH 172/645] btrfs: fix crash when tracepoint arguments are freed by wq callbacks Enabling btrfs tracepoints leads to instant crash, as reported. The wq callbacks could free the memory and the tracepoints started to dereference the members to get to fs_info. The proposed fix https://marc.info/?l=linux-btrfs&m=148172436722606&w=2 removed the tracepoints but we could preserve them by passing only the required data in a safe way. Fixes: bc074524e123 ("btrfs: prefix fsid to all trace events") CC: stable@vger.kernel.org # 4.8+ Reported-by: Sebastian Andrzej Siewior Reviewed-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/async-thread.c | 15 +++++++++++---- include/trace/events/btrfs.h | 22 +++++++++++++--------- 2 files changed, 24 insertions(+), 13 deletions(-) diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 63d197724519..ff0b0be92d61 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -273,6 +273,8 @@ static void run_ordered_work(struct __btrfs_workqueue *wq) unsigned long flags; while (1) { + void *wtag; + spin_lock_irqsave(lock, flags); if (list_empty(list)) break; @@ -299,11 +301,13 @@ static void run_ordered_work(struct __btrfs_workqueue *wq) spin_unlock_irqrestore(lock, flags); /* - * we don't want to call the ordered free functions - * with the lock held though + * We don't want to call the ordered free functions with the + * lock held though. Save the work as tag for the trace event, + * because the callback could free the structure. */ + wtag = work; work->ordered_free(work); - trace_btrfs_all_work_done(work); + trace_btrfs_all_work_done(wq->fs_info, wtag); } spin_unlock_irqrestore(lock, flags); } @@ -311,6 +315,7 @@ static void run_ordered_work(struct __btrfs_workqueue *wq) static void normal_work_helper(struct btrfs_work *work) { struct __btrfs_workqueue *wq; + void *wtag; int need_order = 0; /* @@ -324,6 +329,8 @@ static void normal_work_helper(struct btrfs_work *work) if (work->ordered_func) need_order = 1; wq = work->wq; + /* Safe for tracepoints in case work gets freed by the callback */ + wtag = work; trace_btrfs_work_sched(work); thresh_exec_hook(wq); @@ -333,7 +340,7 @@ static void normal_work_helper(struct btrfs_work *work) run_ordered_work(wq); } if (!need_order) - trace_btrfs_all_work_done(work); + trace_btrfs_all_work_done(wq->fs_info, wtag); } void btrfs_init_work(struct btrfs_work *work, btrfs_work_func_t uniq_func, diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h index c14bed4ab097..b09225c77676 100644 --- a/include/trace/events/btrfs.h +++ b/include/trace/events/btrfs.h @@ -1157,22 +1157,26 @@ DECLARE_EVENT_CLASS(btrfs__work, __entry->func, __entry->ordered_func, __entry->ordered_free) ); -/* For situiations that the work is freed */ +/* + * For situiations when the work is freed, we pass fs_info and a tag that that + * matches address of the work structure so it can be paired with the + * scheduling event. + */ DECLARE_EVENT_CLASS(btrfs__work__done, - TP_PROTO(struct btrfs_work *work), + TP_PROTO(struct btrfs_fs_info *fs_info, void *wtag), - TP_ARGS(work), + TP_ARGS(fs_info, wtag), TP_STRUCT__entry_btrfs( - __field( void *, work ) + __field( void *, wtag ) ), - TP_fast_assign_btrfs(btrfs_work_owner(work), - __entry->work = work; + TP_fast_assign_btrfs(fs_info, + __entry->wtag = wtag; ), - TP_printk_btrfs("work->%p", __entry->work) + TP_printk_btrfs("work->%p", __entry->wtag) ); DEFINE_EVENT(btrfs__work, btrfs_work_queued, @@ -1191,9 +1195,9 @@ DEFINE_EVENT(btrfs__work, btrfs_work_sched, DEFINE_EVENT(btrfs__work__done, btrfs_all_work_done, - TP_PROTO(struct btrfs_work *work), + TP_PROTO(struct btrfs_fs_info *fs_info, void *wtag), - TP_ARGS(work) + TP_ARGS(fs_info, wtag) ); DEFINE_EVENT(btrfs__work, btrfs_ordered_sched, From 92a1bf76a89ad338f00eb9a2c7689a3907fbcaad Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Thu, 17 Nov 2016 15:00:50 -0800 Subject: [PATCH 173/645] Btrfs: add 'inode' for extent map tracepoint 'inode' is an important field for btrfs_get_extent, lets trace it. Signed-off-by: Liu Bo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 2 +- include/trace/events/btrfs.h | 12 ++++++++---- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a713d9d324b0..fab189c67eff 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7059,7 +7059,7 @@ insert: write_unlock(&em_tree->lock); out: - trace_btrfs_get_extent(root, em); + trace_btrfs_get_extent(root, inode, em); btrfs_free_path(path); if (trans) { diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h index b09225c77676..3048f5205363 100644 --- a/include/trace/events/btrfs.h +++ b/include/trace/events/btrfs.h @@ -184,14 +184,16 @@ DEFINE_EVENT(btrfs__inode, btrfs_inode_evict, TRACE_EVENT_CONDITION(btrfs_get_extent, - TP_PROTO(struct btrfs_root *root, struct extent_map *map), + TP_PROTO(struct btrfs_root *root, struct inode *inode, + struct extent_map *map), - TP_ARGS(root, map), + TP_ARGS(root, inode, map), TP_CONDITION(map), TP_STRUCT__entry_btrfs( __field( u64, root_objectid ) + __field( u64, ino ) __field( u64, start ) __field( u64, len ) __field( u64, orig_start ) @@ -204,7 +206,8 @@ TRACE_EVENT_CONDITION(btrfs_get_extent, TP_fast_assign_btrfs(root->fs_info, __entry->root_objectid = root->root_key.objectid; - __entry->start = map->start; + __entry->ino = btrfs_ino(inode); + __entry->start = map->start; __entry->len = map->len; __entry->orig_start = map->orig_start; __entry->block_start = map->block_start; @@ -214,11 +217,12 @@ TRACE_EVENT_CONDITION(btrfs_get_extent, __entry->compress_type = map->compress_type; ), - TP_printk_btrfs("root = %llu(%s), start = %llu, len = %llu, " + TP_printk_btrfs("root = %llu(%s), ino = %llu start = %llu, len = %llu, " "orig_start = %llu, block_start = %llu(%s), " "block_len = %llu, flags = %s, refs = %u, " "compress_type = %u", show_root_type(__entry->root_objectid), + (unsigned long long)__entry->ino, (unsigned long long)__entry->start, (unsigned long long)__entry->len, (unsigned long long)__entry->orig_start, From 7856654842bdbebc0fbcbf51573da5d70a787aba Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 30 Nov 2016 16:10:10 -0800 Subject: [PATCH 174/645] Btrfs: add truncated_len for ordered extent tracepoints This can help us monitor truncated ordered extents. Signed-off-by: Liu Bo Reviewed-by: David Sterba Signed-off-by: David Sterba --- include/trace/events/btrfs.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h index 3048f5205363..2026a89786b0 100644 --- a/include/trace/events/btrfs.h +++ b/include/trace/events/btrfs.h @@ -263,6 +263,7 @@ DECLARE_EVENT_CLASS(btrfs__ordered_extent, __field( int, compress_type ) __field( int, refs ) __field( u64, root_objectid ) + __field( u64, truncated_len ) ), TP_fast_assign_btrfs(btrfs_sb(inode->i_sb), @@ -277,10 +278,12 @@ DECLARE_EVENT_CLASS(btrfs__ordered_extent, __entry->refs = atomic_read(&ordered->refs); __entry->root_objectid = BTRFS_I(inode)->root->root_key.objectid; + __entry->truncated_len = ordered->truncated_len; ), TP_printk_btrfs("root = %llu(%s), ino = %llu, file_offset = %llu, " "start = %llu, len = %llu, disk_len = %llu, " + "truncated_len = %llu, " "bytes_left = %llu, flags = %s, compress_type = %d, " "refs = %d", show_root_type(__entry->root_objectid), @@ -289,6 +292,7 @@ DECLARE_EVENT_CLASS(btrfs__ordered_extent, (unsigned long long)__entry->start, (unsigned long long)__entry->len, (unsigned long long)__entry->disk_len, + (unsigned long long)__entry->truncated_len, (unsigned long long)__entry->bytes_left, show_ordered_flags(__entry->flags), __entry->compress_type, __entry->refs) From 562a7a07bf61e2949f7cbdb6ac7537ad9e2794d1 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 6 Jan 2017 15:51:36 +0100 Subject: [PATCH 175/645] btrfs: make tracepoint format strings more compact We've recently added the fsid to trace events, this makes the line quite long. To reduce the it again, remove extra spaces around = and remove ",". Signed-off-by: David Sterba --- include/trace/events/btrfs.h | 112 +++++++++++++++++------------------ 1 file changed, 56 insertions(+), 56 deletions(-) diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h index 2026a89786b0..88d18a8ceb59 100644 --- a/include/trace/events/btrfs.h +++ b/include/trace/events/btrfs.h @@ -130,8 +130,8 @@ DECLARE_EVENT_CLASS(btrfs__inode, BTRFS_I(inode)->root->root_key.objectid; ), - TP_printk_btrfs("root = %llu(%s), gen = %llu, ino = %lu, blocks = %llu, " - "disk_i_size = %llu, last_trans = %llu, logged_trans = %llu", + TP_printk_btrfs("root=%llu(%s) gen=%llu ino=%lu blocks=%llu " + "disk_i_size=%llu last_trans=%llu logged_trans=%llu", show_root_type(__entry->root_objectid), (unsigned long long)__entry->generation, (unsigned long)__entry->ino, @@ -217,10 +217,10 @@ TRACE_EVENT_CONDITION(btrfs_get_extent, __entry->compress_type = map->compress_type; ), - TP_printk_btrfs("root = %llu(%s), ino = %llu start = %llu, len = %llu, " - "orig_start = %llu, block_start = %llu(%s), " - "block_len = %llu, flags = %s, refs = %u, " - "compress_type = %u", + TP_printk_btrfs("root=%llu(%s) ino=%llu start=%llu len=%llu " + "orig_start=%llu block_start=%llu(%s) " + "block_len=%llu flags=%s refs=%u " + "compress_type=%u", show_root_type(__entry->root_objectid), (unsigned long long)__entry->ino, (unsigned long long)__entry->start, @@ -281,11 +281,11 @@ DECLARE_EVENT_CLASS(btrfs__ordered_extent, __entry->truncated_len = ordered->truncated_len; ), - TP_printk_btrfs("root = %llu(%s), ino = %llu, file_offset = %llu, " - "start = %llu, len = %llu, disk_len = %llu, " - "truncated_len = %llu, " - "bytes_left = %llu, flags = %s, compress_type = %d, " - "refs = %d", + TP_printk_btrfs("root=%llu(%s) ino=%llu file_offset=%llu " + "start=%llu len=%llu disk_len=%llu " + "truncated_len=%llu " + "bytes_left=%llu flags=%s compress_type=%d " + "refs=%d", show_root_type(__entry->root_objectid), (unsigned long long)__entry->ino, (unsigned long long)__entry->file_offset, @@ -362,10 +362,10 @@ DECLARE_EVENT_CLASS(btrfs__writepage, BTRFS_I(inode)->root->root_key.objectid; ), - TP_printk_btrfs("root = %llu(%s), ino = %lu, page_index = %lu, " - "nr_to_write = %ld, pages_skipped = %ld, range_start = %llu, " - "range_end = %llu, for_kupdate = %d, " - "for_reclaim = %d, range_cyclic = %d, writeback_index = %lu", + TP_printk_btrfs("root=%llu(%s) ino=%lu page_index=%lu " + "nr_to_write=%ld pages_skipped=%ld range_start=%llu " + "range_end=%llu for_kupdate=%d " + "for_reclaim=%d range_cyclic=%d writeback_index=%lu", show_root_type(__entry->root_objectid), (unsigned long)__entry->ino, __entry->index, __entry->nr_to_write, __entry->pages_skipped, @@ -408,8 +408,8 @@ TRACE_EVENT(btrfs_writepage_end_io_hook, BTRFS_I(page->mapping->host)->root->root_key.objectid; ), - TP_printk_btrfs("root = %llu(%s), ino = %lu, page_index = %lu, start = %llu, " - "end = %llu, uptodate = %d", + TP_printk_btrfs("root=%llu(%s) ino=%lu page_index=%lu start=%llu " + "end=%llu uptodate=%d", show_root_type(__entry->root_objectid), (unsigned long)__entry->ino, (unsigned long)__entry->index, (unsigned long long)__entry->start, @@ -441,7 +441,7 @@ TRACE_EVENT(btrfs_sync_file, BTRFS_I(inode)->root->root_key.objectid; ), - TP_printk_btrfs("root = %llu(%s), ino = %ld, parent = %ld, datasync = %d", + TP_printk_btrfs("root=%llu(%s) ino=%ld parent=%ld datasync=%d", show_root_type(__entry->root_objectid), (unsigned long)__entry->ino, (unsigned long)__entry->parent, __entry->datasync) @@ -492,9 +492,9 @@ TRACE_EVENT(btrfs_add_block_group, __entry->create = create; ), - TP_printk("%pU: block_group offset = %llu, size = %llu, " - "flags = %llu(%s), bytes_used = %llu, bytes_super = %llu, " - "create = %d", __entry->fsid, + TP_printk("%pU: block_group offset=%llu size=%llu " + "flags=%llu(%s) bytes_used=%llu bytes_super=%llu " + "create=%d", __entry->fsid, (unsigned long long)__entry->offset, (unsigned long long)__entry->size, (unsigned long long)__entry->flags, @@ -543,9 +543,9 @@ DECLARE_EVENT_CLASS(btrfs_delayed_tree_ref, __entry->seq = ref->seq; ), - TP_printk_btrfs("bytenr = %llu, num_bytes = %llu, action = %s, " - "parent = %llu(%s), ref_root = %llu(%s), level = %d, " - "type = %s, seq = %llu", + TP_printk_btrfs("bytenr=%llu num_bytes=%llu action=%s " + "parent=%llu(%s) ref_root=%llu(%s) level=%d " + "type=%s seq=%llu", (unsigned long long)__entry->bytenr, (unsigned long long)__entry->num_bytes, show_ref_action(__entry->action), @@ -608,9 +608,9 @@ DECLARE_EVENT_CLASS(btrfs_delayed_data_ref, __entry->seq = ref->seq; ), - TP_printk_btrfs("bytenr = %llu, num_bytes = %llu, action = %s, " - "parent = %llu(%s), ref_root = %llu(%s), owner = %llu, " - "offset = %llu, type = %s, seq = %llu", + TP_printk_btrfs("bytenr=%llu num_bytes=%llu action=%s " + "parent=%llu(%s) ref_root=%llu(%s) owner=%llu " + "offset=%llu type=%s seq=%llu", (unsigned long long)__entry->bytenr, (unsigned long long)__entry->num_bytes, show_ref_action(__entry->action), @@ -665,7 +665,7 @@ DECLARE_EVENT_CLASS(btrfs_delayed_ref_head, __entry->is_data = head_ref->is_data; ), - TP_printk_btrfs("bytenr = %llu, num_bytes = %llu, action = %s, is_data = %d", + TP_printk_btrfs("bytenr=%llu num_bytes=%llu action=%s is_data=%d", (unsigned long long)__entry->bytenr, (unsigned long long)__entry->num_bytes, show_ref_action(__entry->action), @@ -729,8 +729,8 @@ DECLARE_EVENT_CLASS(btrfs__chunk, __entry->root_objectid = fs_info->chunk_root->root_key.objectid; ), - TP_printk_btrfs("root = %llu(%s), offset = %llu, size = %llu, " - "num_stripes = %d, sub_stripes = %d, type = %s", + TP_printk_btrfs("root=%llu(%s) offset=%llu size=%llu " + "num_stripes=%d sub_stripes=%d type=%s", show_root_type(__entry->root_objectid), (unsigned long long)__entry->offset, (unsigned long long)__entry->size, @@ -779,8 +779,8 @@ TRACE_EVENT(btrfs_cow_block, __entry->cow_level = btrfs_header_level(cow); ), - TP_printk_btrfs("root = %llu(%s), refs = %d, orig_buf = %llu " - "(orig_level = %d), cow_buf = %llu (cow_level = %d)", + TP_printk_btrfs("root=%llu(%s) refs=%d orig_buf=%llu " + "(orig_level=%d) cow_buf=%llu (cow_level=%d)", show_root_type(__entry->root_objectid), __entry->refs, (unsigned long long)__entry->buf_start, @@ -844,7 +844,7 @@ TRACE_EVENT(btrfs_trigger_flush, __assign_str(reason, reason) ), - TP_printk("%pU: %s: flush = %d(%s), flags = %llu(%s), bytes = %llu", + TP_printk("%pU: %s: flush=%d(%s) flags=%llu(%s) bytes=%llu", __entry->fsid, __get_str(reason), __entry->flush, show_flush_action(__entry->flush), (unsigned long long)__entry->flags, @@ -887,8 +887,8 @@ TRACE_EVENT(btrfs_flush_space, __entry->ret = ret; ), - TP_printk("%pU: state = %d(%s), flags = %llu(%s), num_bytes = %llu, " - "orig_bytes = %llu, ret = %d", __entry->fsid, __entry->state, + TP_printk("%pU: state=%d(%s) flags=%llu(%s) num_bytes=%llu " + "orig_bytes=%llu ret=%d", __entry->fsid, __entry->state, show_flush_state(__entry->state), (unsigned long long)__entry->flags, __print_flags((unsigned long)__entry->flags, "|", @@ -913,7 +913,7 @@ DECLARE_EVENT_CLASS(btrfs__reserved_extent, __entry->len = len; ), - TP_printk_btrfs("root = %llu(%s), start = %llu, len = %llu", + TP_printk_btrfs("root=%llu(%s) start=%llu len=%llu", show_root_type(BTRFS_EXTENT_TREE_OBJECTID), (unsigned long long)__entry->start, (unsigned long long)__entry->len) @@ -952,7 +952,7 @@ TRACE_EVENT(find_free_extent, __entry->data = data; ), - TP_printk_btrfs("root = %Lu(%s), len = %Lu, empty_size = %Lu, flags = %Lu(%s)", + TP_printk_btrfs("root=%Lu(%s) len=%Lu empty_size=%Lu flags=%Lu(%s)", show_root_type(BTRFS_EXTENT_TREE_OBJECTID), __entry->num_bytes, __entry->empty_size, __entry->data, __print_flags((unsigned long)__entry->data, "|", @@ -981,8 +981,8 @@ DECLARE_EVENT_CLASS(btrfs__reserve_extent, __entry->len = len; ), - TP_printk_btrfs("root = %Lu(%s), block_group = %Lu, flags = %Lu(%s), " - "start = %Lu, len = %Lu", + TP_printk_btrfs("root=%Lu(%s) block_group=%Lu flags=%Lu(%s) " + "start=%Lu len=%Lu", show_root_type(BTRFS_EXTENT_TREE_OBJECTID), __entry->bg_objectid, __entry->flags, __print_flags((unsigned long)__entry->flags, @@ -1033,8 +1033,8 @@ TRACE_EVENT(btrfs_find_cluster, __entry->min_bytes = min_bytes; ), - TP_printk_btrfs("block_group = %Lu, flags = %Lu(%s), start = %Lu, len = %Lu," - " empty_size = %Lu, min_bytes = %Lu", __entry->bg_objectid, + TP_printk_btrfs("block_group=%Lu flags=%Lu(%s) start=%Lu len=%Lu " + "empty_size=%Lu min_bytes=%Lu", __entry->bg_objectid, __entry->flags, __print_flags((unsigned long)__entry->flags, "|", BTRFS_GROUP_FLAGS), __entry->start, @@ -1055,7 +1055,7 @@ TRACE_EVENT(btrfs_failed_cluster_setup, __entry->bg_objectid = block_group->key.objectid; ), - TP_printk_btrfs("block_group = %Lu", __entry->bg_objectid) + TP_printk_btrfs("block_group=%Lu", __entry->bg_objectid) ); TRACE_EVENT(btrfs_setup_cluster, @@ -1083,8 +1083,8 @@ TRACE_EVENT(btrfs_setup_cluster, __entry->bitmap = bitmap; ), - TP_printk_btrfs("block_group = %Lu, flags = %Lu(%s), window_start = %Lu, " - "size = %Lu, max_size = %Lu, bitmap = %d", + TP_printk_btrfs("block_group=%Lu flags=%Lu(%s) window_start=%Lu " + "size=%Lu max_size=%Lu bitmap=%d", __entry->bg_objectid, __entry->flags, __print_flags((unsigned long)__entry->flags, "|", @@ -1111,7 +1111,7 @@ TRACE_EVENT(alloc_extent_state, __entry->ip = IP ), - TP_printk("state=%p; mask = %s; caller = %pS", __entry->state, + TP_printk("state=%p mask=%s caller=%pS", __entry->state, show_gfp_flags(__entry->mask), (void *)__entry->ip) ); @@ -1131,7 +1131,7 @@ TRACE_EVENT(free_extent_state, __entry->ip = IP ), - TP_printk(" state=%p; caller = %pS", __entry->state, + TP_printk("state=%p caller=%pS", __entry->state, (void *)__entry->ip) ); @@ -1159,8 +1159,8 @@ DECLARE_EVENT_CLASS(btrfs__work, __entry->normal_work = &work->normal_work; ), - TP_printk_btrfs("work=%p (normal_work=%p), wq=%p, func=%pf, ordered_func=%p," - " ordered_free=%p", + TP_printk_btrfs("work=%p (normal_work=%p) wq=%p func=%pf ordered_func=%p " + "ordered_free=%p", __entry->work, __entry->normal_work, __entry->wq, __entry->func, __entry->ordered_func, __entry->ordered_free) ); @@ -1233,7 +1233,7 @@ DECLARE_EVENT_CLASS(btrfs__workqueue, __entry->high = high; ), - TP_printk_btrfs("name=%s%s, wq=%p", __get_str(name), + TP_printk_btrfs("name=%s%s wq=%p", __get_str(name), __print_flags(__entry->high, "", {(WQ_HIGHPRI), "-high"}), __entry->wq) @@ -1288,7 +1288,7 @@ DECLARE_EVENT_CLASS(btrfs__qgroup_data_map, __entry->free_reserved = free_reserved; ), - TP_printk_btrfs("rootid=%llu, ino=%lu, free_reserved=%llu", + TP_printk_btrfs("rootid=%llu ino=%lu free_reserved=%llu", __entry->rootid, __entry->ino, __entry->free_reserved) ); @@ -1335,7 +1335,7 @@ DECLARE_EVENT_CLASS(btrfs__qgroup_rsv_data, __entry->op = op; ), - TP_printk_btrfs("root=%llu, ino=%lu, start=%llu, len=%llu, reserved=%llu, op=%s", + TP_printk_btrfs("root=%llu ino=%lu start=%llu len=%llu reserved=%llu op=%s", __entry->rootid, __entry->ino, __entry->start, __entry->len, __entry->reserved, __print_flags((unsigned long)__entry->op, "", @@ -1373,7 +1373,7 @@ DECLARE_EVENT_CLASS(btrfs__qgroup_delayed_ref, __entry->reserved = reserved; ), - TP_printk_btrfs("root=%llu, reserved=%llu, op=free", + TP_printk_btrfs("root=%llu reserved=%llu op=free", __entry->ref_root, __entry->reserved) ); @@ -1400,7 +1400,7 @@ DECLARE_EVENT_CLASS(btrfs_qgroup_extent, __entry->num_bytes = rec->num_bytes; ), - TP_printk_btrfs("bytenr = %llu, num_bytes = %llu", + TP_printk_btrfs("bytenr=%llu num_bytes=%llu", (unsigned long long)__entry->bytenr, (unsigned long long)__entry->num_bytes) ); @@ -1442,8 +1442,8 @@ TRACE_EVENT(btrfs_qgroup_account_extent, __entry->nr_new_roots = nr_new_roots; ), - TP_printk_btrfs("bytenr = %llu, num_bytes = %llu, nr_old_roots = %llu, " - "nr_new_roots = %llu", + TP_printk_btrfs("bytenr=%llu num_bytes=%llu nr_old_roots=%llu " + "nr_new_roots=%llu", __entry->bytenr, __entry->num_bytes, __entry->nr_old_roots, @@ -1469,7 +1469,7 @@ TRACE_EVENT(qgroup_update_counters, __entry->cur_new_count = cur_new_count; ), - TP_printk_btrfs("qgid = %llu, cur_old_count = %llu, cur_new_count = %llu", + TP_printk_btrfs("qgid=%llu cur_old_count=%llu cur_new_count=%llu", __entry->qgid, __entry->cur_old_count, __entry->cur_new_count) From fac69d0efad08fc15e4dbfc116830782acc0dc9a Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Sat, 7 Jan 2017 10:38:31 +0100 Subject: [PATCH 176/645] x86/boot: Add missing declaration of string functions Add the missing declarations of basic string functions to string.h to allow a clean build. Fixes: 5be865661516 ("String-handling functions for the new x86 setup code.") Signed-off-by: Nicholas Mc Guire Link: http://lkml.kernel.org/r/1483781911-21399-1-git-send-email-hofrat@osadl.org Signed-off-by: Thomas Gleixner --- arch/x86/boot/string.c | 1 + arch/x86/boot/string.h | 9 +++++++++ 2 files changed, 10 insertions(+) diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c index cc3bd583dce1..9e240fcba784 100644 --- a/arch/x86/boot/string.c +++ b/arch/x86/boot/string.c @@ -14,6 +14,7 @@ #include #include "ctype.h" +#include "string.h" int memcmp(const void *s1, const void *s2, size_t len) { diff --git a/arch/x86/boot/string.h b/arch/x86/boot/string.h index 725e820602b1..113588ddb43f 100644 --- a/arch/x86/boot/string.h +++ b/arch/x86/boot/string.h @@ -18,4 +18,13 @@ int memcmp(const void *s1, const void *s2, size_t len); #define memset(d,c,l) __builtin_memset(d,c,l) #define memcmp __builtin_memcmp +extern int strcmp(const char *str1, const char *str2); +extern int strncmp(const char *cs, const char *ct, size_t count); +extern size_t strlen(const char *s); +extern char *strstr(const char *s1, const char *s2); +extern size_t strnlen(const char *s, size_t maxlen); +extern unsigned int atou(const char *s); +extern unsigned long long simple_strtoull(const char *cp, char **endp, + unsigned int base); + #endif /* BOOT_STRING_H */ From 9620ca90115d4bd700f05862d3b210a266a66efe Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 9 Jan 2017 01:02:47 +0100 Subject: [PATCH 177/645] spi: spi-axi: Free resources on error path We should go to 'err_put_master' here instead of returning directly. Otherwise a call to 'spi_master_put' is missing. Signed-off-by: Christophe JAILLET Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- drivers/spi/spi-axi-spi-engine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c index 319225d7e761..6ab4c7700228 100644 --- a/drivers/spi/spi-axi-spi-engine.c +++ b/drivers/spi/spi-axi-spi-engine.c @@ -494,7 +494,8 @@ static int spi_engine_probe(struct platform_device *pdev) SPI_ENGINE_VERSION_MAJOR(version), SPI_ENGINE_VERSION_MINOR(version), SPI_ENGINE_VERSION_PATCH(version)); - return -ENODEV; + ret = -ENODEV; + goto err_put_master; } spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); From 02c5c03283c52157d336abf5e44ffcda10579fbf Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Tue, 27 Dec 2016 12:05:05 +0800 Subject: [PATCH 178/645] ASoC: rt5645: set sel_i2s_pre_div1 to 2 The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function. However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Tested-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt5645.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 10c2a564a715..1ac96ef9ee20 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3833,6 +3833,9 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, } } + regmap_update_bits(rt5645->regmap, RT5645_ADDA_CLK1, + RT5645_I2S_PD1_MASK, RT5645_I2S_PD1_2); + if (rt5645->pdata.jd_invert) { regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2, RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV); From 4e2da44691cffbfffb1535f478d19bc2dca3e62b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:10 +0100 Subject: [PATCH 179/645] USB: serial: ch341: fix initial modem-control state DTR and RTS will be asserted by the tty-layer when the port is opened and deasserted on close (if HUPCL is set). Make sure the initial state is not-asserted before the port is first opened as well. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2597b83a8ae2..d133e72fe888 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -258,7 +258,6 @@ static int ch341_port_probe(struct usb_serial_port *port) spin_lock_init(&priv->lock); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(port->serial->dev, priv); if (r < 0) From a20047f36e2f6a1eea4f1fd261aaa55882369868 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:11 +0100 Subject: [PATCH 180/645] USB: serial: ch341: fix open and resume after B0 The private baud_rate variable is used to configure the port at open and reset-resume and must never be set to (and left at) zero or reset-resume and all further open attempts will fail. Fixes: aa91def41a7b ("USB: ch341: set tty baud speed according to tty struct") Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index d133e72fe888..6279df905c14 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -355,7 +355,6 @@ static void ch341_set_termios(struct tty_struct *tty, baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX; switch (C_CSIZE(tty)) { @@ -388,6 +387,9 @@ static void ch341_set_termios(struct tty_struct *tty, spin_lock_irqsave(&priv->lock, flags); priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); spin_unlock_irqrestore(&priv->lock, flags); + + priv->baud_rate = baud_rate; + r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl); if (r < 0 && old_termios) { priv->baud_rate = tty_termios_baud_rate(old_termios); From 030ee7ae52a46a2be52ccc8242c4a330aba8d38e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:12 +0100 Subject: [PATCH 181/645] USB: serial: ch341: fix modem-control and B0 handling The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 6279df905c14..0cc5056b304d 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -384,10 +384,6 @@ static void ch341_set_termios(struct tty_struct *tty, ctrl |= CH341_LCR_STOP_BITS_2; if (baud_rate) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); - priv->baud_rate = baud_rate; r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl); @@ -395,14 +391,16 @@ static void ch341_set_termios(struct tty_struct *tty, priv->baud_rate = tty_termios_baud_rate(old_termios); tty_termios_copy_hw(&tty->termios, old_termios); } - } else { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); } - ch341_set_handshake(port->serial->dev, priv->line_control); + spin_lock_irqsave(&priv->lock, flags); + if (C_BAUD(tty) == B0) + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, priv->line_control); } static void ch341_break_ctl(struct tty_struct *tty, int break_state) From f2950b78547ffb8475297ada6b92bc2d774d5461 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:13 +0100 Subject: [PATCH 182/645] USB: serial: ch341: fix open error handling Make sure to stop the interrupt URB before returning on errors during open. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 0cc5056b304d..8f41d4385f1c 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -319,7 +319,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) r = ch341_configure(serial->dev, priv); if (r) - goto out; + return r; if (tty) ch341_set_termios(tty, port, NULL); @@ -329,12 +329,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) { dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", __func__, r); - goto out; + return r; } r = usb_serial_generic_open(tty, port); + if (r) + goto err_kill_interrupt_urb; -out: return r; + return 0; + +err_kill_interrupt_urb: + usb_kill_urb(port->interrupt_in_urb); + + return r; } /* Old_termios contains the original termios settings and From ce5e292828117d1b71cbd3edf9e9137cf31acd30 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:14 +0100 Subject: [PATCH 183/645] USB: serial: ch341: fix resume after reset Fix reset-resume handling which failed to resubmit the read and interrupt URBs, thereby leaving a port that was open before suspend in a broken state until closed and reopened. Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Fixes: 2bfd1c96a9fb ("USB: serial: ch341: remove reset_resume callback") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 8f41d4385f1c..5343d65f3b52 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -582,14 +582,23 @@ static int ch341_tiocmget(struct tty_struct *tty) static int ch341_reset_resume(struct usb_serial *serial) { - struct ch341_private *priv; - - priv = usb_get_serial_port_data(serial->port[0]); + struct usb_serial_port *port = serial->port[0]; + struct ch341_private *priv = usb_get_serial_port_data(port); + int ret; /* reconfigure ch341 serial port after bus-reset */ ch341_configure(serial->dev, priv); - return 0; + if (tty_port_initialized(&port->port)) { + ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + if (ret) { + dev_err(&port->dev, "failed to submit interrupt urb: %d\n", + ret); + return ret; + } + } + + return usb_serial_generic_resume(serial); } static struct usb_serial_driver ch341_device = { From 3cca8624b6624e7ffb87dcd8a0a05bef9b50e97b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:15 +0100 Subject: [PATCH 184/645] USB: serial: ch341: fix line settings after reset-resume A recent change added support for modifying the default line-control settings, but did not make sure that the modified settings were used as part of reconfiguration after a device has been reset during resume. This caused a port that was open before suspend to be unusable until being closed and reopened. Fixes: ba781bdf8662 ("USB: serial: ch341: add support for parity, frame length, stop bits") Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 5343d65f3b52..eabdd05a2147 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -95,6 +95,7 @@ struct ch341_private { unsigned baud_rate; /* set baud rate */ u8 line_control; /* set line control value RTS/DTR */ u8 line_status; /* active status of modem control inputs */ + u8 lcr; }; static void ch341_set_termios(struct tty_struct *tty, @@ -232,7 +233,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - r = ch341_init_set_baudrate(dev, priv, 0); + r = ch341_init_set_baudrate(dev, priv, priv->lcr); if (r < 0) goto out; @@ -397,6 +398,8 @@ static void ch341_set_termios(struct tty_struct *tty, if (r < 0 && old_termios) { priv->baud_rate = tty_termios_baud_rate(old_termios); tty_termios_copy_hw(&tty->termios, old_termios); + } else if (r == 0) { + priv->lcr = ctrl; } } From 55fa15b5987db22b4f35d3f0798928c126be5f1c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:16 +0100 Subject: [PATCH 185/645] USB: serial: ch341: fix baud rate and line-control handling Revert to using direct register writes to set the divisor and line-control registers. A recent change switched to using the init vendor command to update these registers, something which also enabled support for CH341A devices. It turns out that simply setting bit 7 in the divisor register is sufficient to support CH341A and specifically prevent data from being buffered until a full endpoint-size packet (32 bytes) has been received. Using the init command also had the side-effect of temporarily deasserting the DTR/RTS signals on every termios change (including initialisation on open) something which for example could cause problems in setups where DTR is used to trigger a reset. Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index eabdd05a2147..8d7b0847109b 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -133,8 +133,8 @@ static int ch341_control_in(struct usb_device *dev, return r; } -static int ch341_init_set_baudrate(struct usb_device *dev, - struct ch341_private *priv, unsigned ctrl) +static int ch341_set_baudrate_lcr(struct usb_device *dev, + struct ch341_private *priv, u8 lcr) { short a; int r; @@ -157,9 +157,19 @@ static int ch341_init_set_baudrate(struct usb_device *dev, factor = 0x10000 - factor; a = (factor & 0xff00) | divisor; - /* 0x9c is "enable SFR_UART Control register and timer" */ - r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, - 0x9c | (ctrl << 8), a | 0x80); + /* + * CH341A buffers data until a full endpoint-size packet (32 bytes) + * has been received unless bit 7 is set. + */ + a |= BIT(7); + + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a); + if (r) + return r; + + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr); + if (r) + return r; return r; } @@ -233,7 +243,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - r = ch341_init_set_baudrate(dev, priv, priv->lcr); + r = ch341_set_baudrate_lcr(dev, priv, priv->lcr); if (r < 0) goto out; @@ -394,7 +404,7 @@ static void ch341_set_termios(struct tty_struct *tty, if (baud_rate) { priv->baud_rate = baud_rate; - r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl); + r = ch341_set_baudrate_lcr(port->serial->dev, priv, ctrl); if (r < 0 && old_termios) { priv->baud_rate = tty_termios_baud_rate(old_termios); tty_termios_copy_hw(&tty->termios, old_termios); From 811a919135b980bac8009d042acdccf10dc1ef5e Mon Sep 17 00:00:00 2001 From: Zefir Kurtisi Date: Fri, 6 Jan 2017 12:14:48 +0100 Subject: [PATCH 186/645] phy state machine: failsafe leave invalid RUNNING state While in RUNNING state, phy_state_machine() checks for link changes by comparing phydev->link before and after calling phy_read_status(). This works as long as it is guaranteed that phydev->link is never changed outside the phy_state_machine(). If in some setups this happens, it causes the state machine to miss a link loss and remain RUNNING despite phydev->link being 0. This has been observed running a dsa setup with a process continuously polling the link states over ethtool each second (SNMPD RFC-1213 agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to call phy_read_status() and with that modify the link status - and with that bricking the phy state machine. This patch adds a fail-safe check while in RUNNING, which causes to move to CHANGELINK when the link is gone and we are still RUNNING. Signed-off-by: Zefir Kurtisi Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 25f93a98863b..48da6e93c3f7 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1065,6 +1065,15 @@ void phy_state_machine(struct work_struct *work) if (old_link != phydev->link) phydev->state = PHY_CHANGELINK; } + /* + * Failsafe: check that nobody set phydev->link=0 between two + * poll cycles, otherwise we won't leave RUNNING state as long + * as link remains down. + */ + if (!phydev->link && phydev->state == PHY_RUNNING) { + phydev->state = PHY_CHANGELINK; + phydev_err(phydev, "no link in PHY_RUNNING\n"); + } break; case PHY_CHANGELINK: err = phy_read_status(phydev); From 67c408cfa8862fe7e45b3a1f762f7140e03b7217 Mon Sep 17 00:00:00 2001 From: Alexander Alemayhu Date: Sat, 7 Jan 2017 23:53:00 +0100 Subject: [PATCH 187/645] ipv6: fix typos o s/approriate/appropriate o s/discouvery/discovery Signed-off-by: Alexander Alemayhu Signed-off-by: David S. Miller --- net/ipv6/route.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 8417c41d8ec8..ce5aaf448c54 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1464,7 +1464,7 @@ static struct rt6_info *__ip6_route_redirect(struct net *net, struct fib6_node *fn; /* Get the "current" route for this destination and - * check if the redirect has come from approriate router. + * check if the redirect has come from appropriate router. * * RFC 4861 specifies that redirects should only be * accepted if they come from the nexthop to the target. @@ -2768,7 +2768,7 @@ static int rt6_mtu_change_route(struct rt6_info *rt, void *p_arg) old MTU is the lowest MTU in the path, update the route PMTU to reflect the increase. In this case if the other nodes' MTU also have the lowest MTU, TOO BIG MESSAGE will be lead to - PMTU discouvery. + PMTU discovery. */ if (rt->dst.dev == arg->dev && dst_metric_raw(&rt->dst, RTAX_MTU) && From b007f09072ca8afa118ade333e717ba443e8d807 Mon Sep 17 00:00:00 2001 From: Pavel Tikhomirov Date: Mon, 9 Jan 2017 10:45:49 +0300 Subject: [PATCH 188/645] ipv4: make tcp_notsent_lowat sysctl knob behave as true unsigned int > cat /proc/sys/net/ipv4/tcp_notsent_lowat -1 > echo 4294967295 > /proc/sys/net/ipv4/tcp_notsent_lowat -bash: echo: write error: Invalid argument > echo -2147483648 > /proc/sys/net/ipv4/tcp_notsent_lowat > cat /proc/sys/net/ipv4/tcp_notsent_lowat -2147483648 but in documentation we have "tcp_notsent_lowat - UNSIGNED INTEGER" v2: simplify to just proc_douintvec Signed-off-by: Pavel Tikhomirov Signed-off-by: David S. Miller --- net/ipv4/sysctl_net_ipv4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index 22cbd61079b5..b2fa498b15d1 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -951,7 +951,7 @@ static struct ctl_table ipv4_net_table[] = { .data = &init_net.ipv4.sysctl_tcp_notsent_lowat, .maxlen = sizeof(unsigned int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_douintvec, }, { .procname = "tcp_tw_reuse", From ce7e40c432ba84da104438f6799d460a4cad41bc Mon Sep 17 00:00:00 2001 From: Vlad Tsyrklevich Date: Mon, 9 Jan 2017 20:57:48 +0700 Subject: [PATCH 189/645] net/appletalk: Fix kernel memory disclosure ipddp_route structs contain alignment padding so kernel heap memory is leaked when they are copied to user space in ipddp_ioctl(SIOCFINDIPDDPRT). Change kmalloc() to kzalloc() to clear that memory. Signed-off-by: Vlad Tsyrklevich Signed-off-by: David S. Miller --- drivers/net/appletalk/ipddp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c index b8c293373ecc..a306de4318d7 100644 --- a/drivers/net/appletalk/ipddp.c +++ b/drivers/net/appletalk/ipddp.c @@ -190,7 +190,7 @@ static netdev_tx_t ipddp_xmit(struct sk_buff *skb, struct net_device *dev) */ static int ipddp_create(struct ipddp_route *new_rt) { - struct ipddp_route *rt = kmalloc(sizeof(*rt), GFP_KERNEL); + struct ipddp_route *rt = kzalloc(sizeof(*rt), GFP_KERNEL); if (rt == NULL) return -ENOMEM; From 2ebae8bd60188f57e26e95e7fde6b8943297d348 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 9 Jan 2017 15:17:27 +0100 Subject: [PATCH 190/645] net: phy: Add Meson GXL PHY hardware dependency As I understand it the Meson GXL PHY driver is only useful on one architecture so only make it visible on that architecture. Signed-off-by: Jean Delvare Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver") Cc: Neil Armstrong Cc: Florian Fainelli Cc: Andrew Lunn Cc: David S. Miller Signed-off-by: David S. Miller --- drivers/net/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d361835b315d..8dbd59baa34d 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -279,6 +279,7 @@ config MARVELL_PHY config MESON_GXL_PHY tristate "Amlogic Meson GXL Internal PHY" + depends on ARCH_MESON || COMPILE_TEST ---help--- Currently has a driver for the Amlogic Meson GXL Internal PHY From 6bb629db5e7daa619f5242b6ad93e4dd9bf7432c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 9 Jan 2017 08:51:32 -0800 Subject: [PATCH 191/645] tcp: do not export tcp_peer_is_proven() After commit 1fb6f159fd21 ("tcp: add tcp_conn_request"), tcp_peer_is_proven() no longer needs to be exported. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_metrics.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c index d46f4d5b1c62..ba8f02d0f283 100644 --- a/net/ipv4/tcp_metrics.c +++ b/net/ipv4/tcp_metrics.c @@ -606,7 +606,6 @@ bool tcp_peer_is_proven(struct request_sock *req, struct dst_entry *dst, return ret; } -EXPORT_SYMBOL_GPL(tcp_peer_is_proven); void tcp_fetch_timewait_stamp(struct sock *sk, struct dst_entry *dst) { From 5149fd327f16e393c1d04fa5325ab072c32472bf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 9 Jan 2017 13:36:30 -0800 Subject: [PATCH 192/645] xfs: bump up reserved blocks in xfs_alloc_set_aside Setting aside 4 blocks globally for bmbt splits isn't all that useful, as different threads can allocate space in parallel. Bump it to 4 blocks per AG to allow each thread that is currently doing an allocation to dip into it separately. Without that we may no have enough reserved blocks if there are enough parallel transactions in an almost out space file system that all run into bmap btree splits. Signed-off-by: Christoph Hellwig Reviewed-by: Brian Foster Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_alloc.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index 5050056a0b06..0a46f8488b8d 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -95,10 +95,7 @@ unsigned int xfs_alloc_set_aside( struct xfs_mount *mp) { - unsigned int blocks; - - blocks = 4 + (mp->m_sb.sb_agcount * XFS_ALLOC_AGFL_RESERVE); - return blocks; + return mp->m_sb.sb_agcount * (XFS_ALLOC_AGFL_RESERVE + 4); } /* From 255c516278175a6dc7037d1406307f35237d8688 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 9 Jan 2017 13:36:19 -0800 Subject: [PATCH 193/645] xfs: fix bogus minleft manipulations We can't just set minleft to 0 when we're low on space - that's exactly what we need minleft for: to protect space in the AG for btree block allocations when we are low on free space. Signed-off-by: Christoph Hellwig Reviewed-by: Brian Foster Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_alloc.c | 24 +++++++----------------- fs/xfs/libxfs/xfs_bmap.c | 3 --- fs/xfs/libxfs/xfs_bmap_btree.c | 3 +-- 3 files changed, 8 insertions(+), 22 deletions(-) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index 0a46f8488b8d..fe925702c955 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -2635,12 +2635,10 @@ xfs_alloc_vextent( xfs_agblock_t agsize; /* allocation group size */ int error; int flags; /* XFS_ALLOC_FLAG_... locking flags */ - xfs_extlen_t minleft;/* minimum left value, temp copy */ xfs_mount_t *mp; /* mount structure pointer */ xfs_agnumber_t sagno; /* starting allocation group number */ xfs_alloctype_t type; /* input allocation type */ int bump_rotor = 0; - int no_min = 0; xfs_agnumber_t rotorstep = xfs_rotorstep; /* inode32 agf stepper */ mp = args->mp; @@ -2669,7 +2667,6 @@ xfs_alloc_vextent( trace_xfs_alloc_vextent_badargs(args); return 0; } - minleft = args->minleft; switch (type) { case XFS_ALLOCTYPE_THIS_AG: @@ -2680,9 +2677,7 @@ xfs_alloc_vextent( */ args->agno = XFS_FSB_TO_AGNO(mp, args->fsbno); args->pag = xfs_perag_get(mp, args->agno); - args->minleft = 0; error = xfs_alloc_fix_freelist(args, 0); - args->minleft = minleft; if (error) { trace_xfs_alloc_vextent_nofix(args); goto error0; @@ -2747,9 +2742,7 @@ xfs_alloc_vextent( */ for (;;) { args->pag = xfs_perag_get(mp, args->agno); - if (no_min) args->minleft = 0; error = xfs_alloc_fix_freelist(args, flags); - args->minleft = minleft; if (error) { trace_xfs_alloc_vextent_nofix(args); goto error0; @@ -2789,20 +2782,17 @@ xfs_alloc_vextent( * or switch to non-trylock mode. */ if (args->agno == sagno) { - if (no_min == 1) { + if (flags == 0) { args->agbno = NULLAGBLOCK; trace_xfs_alloc_vextent_allfailed(args); break; } - if (flags == 0) { - no_min = 1; - } else { - flags = 0; - if (type == XFS_ALLOCTYPE_START_BNO) { - args->agbno = XFS_FSB_TO_AGBNO(mp, - args->fsbno); - args->type = XFS_ALLOCTYPE_NEAR_BNO; - } + + flags = 0; + if (type == XFS_ALLOCTYPE_START_BNO) { + args->agbno = XFS_FSB_TO_AGBNO(mp, + args->fsbno); + args->type = XFS_ALLOCTYPE_NEAR_BNO; } } xfs_perag_put(args->pag); diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c index 2760bc3b2536..44773c9eb957 100644 --- a/fs/xfs/libxfs/xfs_bmap.c +++ b/fs/xfs/libxfs/xfs_bmap.c @@ -3812,7 +3812,6 @@ xfs_bmap_btalloc( args.fsbno = 0; args.type = XFS_ALLOCTYPE_FIRST_AG; args.total = ap->minlen; - args.minleft = 0; if ((error = xfs_alloc_vextent(&args))) return error; ap->dfops->dop_low = true; @@ -4344,8 +4343,6 @@ xfs_bmapi_allocate( if (error) return error; - if (bma->dfops->dop_low) - bma->minleft = 0; if (bma->cur) bma->cur->bc_private.b.firstblock = *bma->firstblock; if (bma->blkno == NULLFSBLOCK) diff --git a/fs/xfs/libxfs/xfs_bmap_btree.c b/fs/xfs/libxfs/xfs_bmap_btree.c index d6330c297ca0..d9be241fc86f 100644 --- a/fs/xfs/libxfs/xfs_bmap_btree.c +++ b/fs/xfs/libxfs/xfs_bmap_btree.c @@ -502,12 +502,11 @@ try_another_ag: if (args.fsbno == NULLFSBLOCK && args.minleft) { /* * Could not find an AG with enough free space to satisfy - * a full btree split. Try again without minleft and if + * a full btree split. Try again and if * successful activate the lowspace algorithm. */ args.fsbno = 0; args.type = XFS_ALLOCTYPE_FIRST_AG; - args.minleft = 0; error = xfs_alloc_vextent(&args); if (error) goto error0; From 54fee133ad59c87ab01dd84ab3e9397134b32acb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 9 Jan 2017 13:44:30 -0800 Subject: [PATCH 194/645] xfs: adjust allocation length in xfs_alloc_space_available We must decide in xfs_alloc_fix_freelist if we can perform an allocation from a given AG is possible or not based on the available space, and should not fail the allocation past that point on a healthy file system. But currently we have two additional places that second-guess xfs_alloc_fix_freelist: xfs_alloc_ag_vextent tries to adjust the maxlen parameter to remove the reservation before doing the allocation (but ignores the various minium freespace requirements), and xfs_alloc_fix_minleft tries to fix up the allocated length after we've found an extent, but ignores the reservations and also doesn't take the AGFL into account (and thus fails allocations for not matching minlen in some cases). Remove all these later fixups and just correct the maxlen argument inside xfs_alloc_fix_freelist once we have the AGF buffer locked. Signed-off-by: Christoph Hellwig Reviewed-by: Brian Foster Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_alloc.c | 81 ++++++++------------------------------- fs/xfs/libxfs/xfs_alloc.h | 2 +- 2 files changed, 18 insertions(+), 65 deletions(-) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index fe925702c955..f2e7eb6e5243 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -362,35 +362,11 @@ xfs_alloc_fix_len( return; ASSERT(rlen >= args->minlen && rlen <= args->maxlen); ASSERT(rlen % args->prod == args->mod); + ASSERT(args->pag->pagf_freeblks + args->pag->pagf_flcount >= + rlen + args->minleft); args->len = rlen; } -/* - * Fix up length if there is too little space left in the a.g. - * Return 1 if ok, 0 if too little, should give up. - */ -STATIC int -xfs_alloc_fix_minleft( - xfs_alloc_arg_t *args) /* allocation argument structure */ -{ - xfs_agf_t *agf; /* a.g. freelist header */ - int diff; /* free space difference */ - - if (args->minleft == 0) - return 1; - agf = XFS_BUF_TO_AGF(args->agbp); - diff = be32_to_cpu(agf->agf_freeblks) - - args->len - args->minleft; - if (diff >= 0) - return 1; - args->len += diff; /* shrink the allocated space */ - /* casts to (int) catch length underflows */ - if ((int)args->len >= (int)args->minlen) - return 1; - args->agbno = NULLAGBLOCK; - return 0; -} - /* * Update the two btrees, logically removing from freespace the extent * starting at rbno, rlen blocks. The extent is contained within the @@ -686,8 +662,6 @@ xfs_alloc_ag_vextent( xfs_alloc_arg_t *args) /* argument structure for allocation */ { int error=0; - xfs_extlen_t reservation; - xfs_extlen_t oldmax; ASSERT(args->minlen > 0); ASSERT(args->maxlen > 0); @@ -695,20 +669,6 @@ xfs_alloc_ag_vextent( ASSERT(args->mod < args->prod); ASSERT(args->alignment > 0); - /* - * Clamp maxlen to the amount of free space minus any reservations - * that have been made. - */ - oldmax = args->maxlen; - reservation = xfs_ag_resv_needed(args->pag, args->resv); - if (args->maxlen > args->pag->pagf_freeblks - reservation) - args->maxlen = args->pag->pagf_freeblks - reservation; - if (args->maxlen == 0) { - args->agbno = NULLAGBLOCK; - args->maxlen = oldmax; - return 0; - } - /* * Branch to correct routine based on the type. */ @@ -728,8 +688,6 @@ xfs_alloc_ag_vextent( /* NOTREACHED */ } - args->maxlen = oldmax; - if (error || args->agbno == NULLAGBLOCK) return error; @@ -838,9 +796,6 @@ xfs_alloc_ag_vextent_exact( args->len = XFS_AGBLOCK_MIN(tend, args->agbno + args->maxlen) - args->agbno; xfs_alloc_fix_len(args); - if (!xfs_alloc_fix_minleft(args)) - goto not_found; - ASSERT(args->agbno + args->len <= tend); /* @@ -1146,12 +1101,7 @@ restart: XFS_WANT_CORRUPTED_GOTO(args->mp, i == 1, error0); ASSERT(ltbno + ltlen <= be32_to_cpu(XFS_BUF_TO_AGF(args->agbp)->agf_length)); args->len = blen; - if (!xfs_alloc_fix_minleft(args)) { - xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR); - trace_xfs_alloc_near_nominleft(args); - return 0; - } - blen = args->len; + /* * We are allocating starting at bnew for blen blocks. */ @@ -1343,12 +1293,6 @@ restart: */ args->len = XFS_EXTLEN_MIN(ltlena, args->maxlen); xfs_alloc_fix_len(args); - if (!xfs_alloc_fix_minleft(args)) { - trace_xfs_alloc_near_nominleft(args); - xfs_btree_del_cursor(bno_cur_lt, XFS_BTREE_NOERROR); - xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR); - return 0; - } rlen = args->len; (void)xfs_alloc_compute_diff(args->agbno, rlen, args->alignment, args->datatype, ltbnoa, ltlena, <new); @@ -1550,8 +1494,6 @@ restart: } xfs_alloc_fix_len(args); - if (!xfs_alloc_fix_minleft(args)) - goto out_nominleft; rlen = args->len; XFS_WANT_CORRUPTED_GOTO(args->mp, rlen <= flen, error0); /* @@ -2070,10 +2012,20 @@ xfs_alloc_space_available( /* do we have enough free space remaining for the allocation? */ available = (int)(pag->pagf_freeblks + pag->pagf_flcount - - reservation - min_free - args->total); - if (available < (int)args->minleft || available <= 0) + reservation - min_free - args->minleft); + if (available < (int)args->total) return false; + /* + * Clamp maxlen to the amount of free space available for the actual + * extent allocation. + */ + if (available < (int)args->maxlen && !(flags & XFS_ALLOC_FLAG_CHECK)) { + args->maxlen = available; + ASSERT(args->maxlen > 0); + ASSERT(args->maxlen >= args->minlen); + } + return true; } @@ -2119,7 +2071,8 @@ xfs_alloc_fix_freelist( } need = xfs_alloc_min_freelist(mp, pag); - if (!xfs_alloc_space_available(args, need, flags)) + if (!xfs_alloc_space_available(args, need, flags | + XFS_ALLOC_FLAG_CHECK)) goto out_agbp_relse; /* diff --git a/fs/xfs/libxfs/xfs_alloc.h b/fs/xfs/libxfs/xfs_alloc.h index 7c404a6b0ae3..1d0f48a501a3 100644 --- a/fs/xfs/libxfs/xfs_alloc.h +++ b/fs/xfs/libxfs/xfs_alloc.h @@ -56,7 +56,7 @@ typedef unsigned int xfs_alloctype_t; #define XFS_ALLOC_FLAG_FREEING 0x00000002 /* indicate caller is freeing extents*/ #define XFS_ALLOC_FLAG_NORMAP 0x00000004 /* don't modify the rmapbt */ #define XFS_ALLOC_FLAG_NOSHRINK 0x00000008 /* don't shrink the freelist */ - +#define XFS_ALLOC_FLAG_CHECK 0x00000010 /* test only, don't modify args */ /* * Argument structure for xfs_alloc routines. From 12ef830198b0d71668eb9b59f9ba69d32951a48a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 9 Jan 2017 13:39:35 -0800 Subject: [PATCH 195/645] xfs: don't rely on ->total in xfs_alloc_space_available ->total is a bit of an odd parameter passed down to the low-level allocator all the way from the high-level callers. It's supposed to contain the maximum number of blocks to be allocated for the whole transaction [1]. But in xfs_iomap_write_allocate we only convert existing delayed allocations and thus only have a minimal block reservation for the current transaction, so xfs_alloc_space_available can't use it for the allocation decisions. Use the maximum of args->total and the calculated block requirement to make a decision. We probably should get rid of args->total eventually and instead apply ->minleft more broadly, but that will require some extensive changes all over. [1] which creates lots of confusion as most callers don't decrement it once doing a first allocation. But that's for a separate series. Signed-off-by: Christoph Hellwig Reviewed-by: Brian Foster Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_alloc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index f2e7eb6e5243..9f06a211e157 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -1995,7 +1995,7 @@ xfs_alloc_space_available( int flags) { struct xfs_perag *pag = args->pag; - xfs_extlen_t longest; + xfs_extlen_t alloc_len, longest; xfs_extlen_t reservation; /* blocks that are still reserved */ int available; @@ -2005,15 +2005,16 @@ xfs_alloc_space_available( reservation = xfs_ag_resv_needed(pag, args->resv); /* do we have enough contiguous free space for the allocation? */ + alloc_len = args->minlen + (args->alignment - 1) + args->minalignslop; longest = xfs_alloc_longest_free_extent(args->mp, pag, min_free, reservation); - if ((args->minlen + args->alignment + args->minalignslop - 1) > longest) + if (longest < alloc_len) return false; /* do we have enough free space remaining for the allocation? */ available = (int)(pag->pagf_freeblks + pag->pagf_flcount - reservation - min_free - args->minleft); - if (available < (int)args->total) + if (available < (int)max(args->total, alloc_len)) return false; /* From 84a4620cfe97c9d57e39b2369bfb77faff55063d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 9 Jan 2017 13:41:33 -0800 Subject: [PATCH 196/645] xfs: don't print warnings when xfs_log_force fails There are only two reasons for xfs_log_force / xfs_log_force_lsn to fail: one is an I/O error, for which xlog_bdstrat already logs a warning, and the second is an already shutdown log due to a previous I/O errors. In the latter case we'll already have a previous indication for the actual error, but the large stream of misleading warnings from xfs_log_force will probably scroll it out of the message buffer. Simply removing the warnings thus makes the XFS log reporting significantly better. Signed-off-by: Christoph Hellwig Reviewed-by: Carlos Maiolino Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_log.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index c39ac14ff540..b1469f0a91a6 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -3317,12 +3317,8 @@ xfs_log_force( xfs_mount_t *mp, uint flags) { - int error; - trace_xfs_log_force(mp, 0, _RET_IP_); - error = _xfs_log_force(mp, flags, NULL); - if (error) - xfs_warn(mp, "%s: error %d returned.", __func__, error); + _xfs_log_force(mp, flags, NULL); } /* @@ -3466,12 +3462,8 @@ xfs_log_force_lsn( xfs_lsn_t lsn, uint flags) { - int error; - trace_xfs_log_force(mp, lsn, _RET_IP_); - error = _xfs_log_force_lsn(mp, lsn, flags, NULL); - if (error) - xfs_warn(mp, "%s: error %d returned.", __func__, error); + _xfs_log_force_lsn(mp, lsn, flags, NULL); } /* From 32cd7cbbacf700885a2316275f188f2d5739b5f4 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Fri, 6 Jan 2017 19:31:35 -0500 Subject: [PATCH 197/645] md/raid5: Use correct IS_ERR() variation on pointer check This fixes a build error on certain architectures, such as ppc64. Fixes: 6995f0b247e("md: takeover should clear unrelated bits") Signed-off-by: Jes Sorensen Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 7b1da6e95a56..36c13e4be9c9 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -7831,7 +7831,7 @@ static void *raid5_takeover_raid1(struct mddev *mddev) mddev->new_chunk_sectors = chunksect; ret = setup_conf(mddev); - if (!IS_ERR_VALUE(ret)) + if (!IS_ERR(ret)) mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS); return ret; From 5dedade6dfa243c130b85d1e4daba6f027805033 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 9 Jan 2017 12:41:43 +0100 Subject: [PATCH 198/645] x86/CPU: Add native CPUID variants returning a single datum ... similarly to the cpuid_() variants. Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/20170109114147.5082-2-bp@alien8.de Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/processor.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index eaf100508c36..1be64da0384e 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -219,6 +219,24 @@ static inline void native_cpuid(unsigned int *eax, unsigned int *ebx, : "memory"); } +#define native_cpuid_reg(reg) \ +static inline unsigned int native_cpuid_##reg(unsigned int op) \ +{ \ + unsigned int eax = op, ebx, ecx = 0, edx; \ + \ + native_cpuid(&eax, &ebx, &ecx, &edx); \ + \ + return reg; \ +} + +/* + * Native CPUID functions returning a single datum. + */ +native_cpuid_reg(eax) +native_cpuid_reg(ebx) +native_cpuid_reg(ecx) +native_cpuid_reg(edx) + static inline void load_cr3(pgd_t *pgdir) { write_cr3(__pa(pgdir)); From f3e2a51f568d9f33370f4e8bb05669a34223241a Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 9 Jan 2017 12:41:44 +0100 Subject: [PATCH 199/645] x86/microcode: Use native CPUID to tickle out microcode revision Intel supplies the microcode revision value in MSR 0x8b (IA32_BIOS_SIGN_ID) after CPUID(1) has been executed. Execute it each time before reading that MSR. It used to do sync_core() which did do CPUID but c198b121b1a1 ("x86/asm: Rewrite sync_core() to use IRET-to-self") changed the sync_core() implementation so we better make the microcode loading case explicit, as the SDM documents it. Reported-and-tested-by: Jun'ichi Nomura Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/20170109114147.5082-3-bp@alien8.de Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/intel.c | 2 +- arch/x86/kernel/cpu/microcode/intel.c | 26 +++----------------------- 2 files changed, 4 insertions(+), 24 deletions(-) diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index fcd484d2bb03..2d49aa949fa1 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -83,7 +83,7 @@ static void early_init_intel(struct cpuinfo_x86 *c) wrmsr(MSR_IA32_UCODE_REV, 0, 0); /* Required by the SDM */ - sync_core(); + native_cpuid_eax(1); rdmsr(MSR_IA32_UCODE_REV, lower_word, c->microcode); } diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index b624b54912e1..f79249fab389 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -368,26 +368,6 @@ next: return patch; } -static void cpuid_1(void) -{ - /* - * According to the Intel SDM, Volume 3, 9.11.7: - * - * CPUID returns a value in a model specific register in - * addition to its usual register return values. The - * semantics of CPUID cause it to deposit an update ID value - * in the 64-bit model-specific register at address 08BH - * (IA32_BIOS_SIGN_ID). If no update is present in the - * processor, the value in the MSR remains unmodified. - * - * Use native_cpuid -- this code runs very early and we don't - * want to mess with paravirt. - */ - unsigned int eax = 1, ebx, ecx = 0, edx; - - native_cpuid(&eax, &ebx, &ecx, &edx); -} - static int collect_cpu_info_early(struct ucode_cpu_info *uci) { unsigned int val[2]; @@ -413,7 +393,7 @@ static int collect_cpu_info_early(struct ucode_cpu_info *uci) native_wrmsrl(MSR_IA32_UCODE_REV, 0); /* As documented in the SDM: Do a CPUID 1 here */ - cpuid_1(); + native_cpuid_eax(1); /* get the current revision from MSR 0x8B */ native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); @@ -613,7 +593,7 @@ static int apply_microcode_early(struct ucode_cpu_info *uci, bool early) native_wrmsrl(MSR_IA32_UCODE_REV, 0); /* As documented in the SDM: Do a CPUID 1 here */ - cpuid_1(); + native_cpuid_eax(1); /* get the current revision from MSR 0x8B */ native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); @@ -825,7 +805,7 @@ static int apply_microcode_intel(int cpu) wrmsrl(MSR_IA32_UCODE_REV, 0); /* As documented in the SDM: Do a CPUID 1 here */ - cpuid_1(); + native_cpuid_eax(1); /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); From 4167709bbf826512a52ebd6aafda2be104adaec9 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 9 Jan 2017 12:41:45 +0100 Subject: [PATCH 200/645] x86/microcode/intel: Add a helper which gives the microcode revision Since on Intel we're required to do CPUID(1) first, before reading the microcode revision MSR, let's add a special helper which does the required steps so that we don't forget to do them next time, when we want to read the microcode revision. Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/20170109114147.5082-4-bp@alien8.de Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/microcode_intel.h | 15 +++++++++ arch/x86/kernel/cpu/intel.c | 11 ++----- arch/x86/kernel/cpu/microcode/intel.c | 43 ++++++++------------------ 3 files changed, 31 insertions(+), 38 deletions(-) diff --git a/arch/x86/include/asm/microcode_intel.h b/arch/x86/include/asm/microcode_intel.h index 195becc6f780..e793fc9a9b20 100644 --- a/arch/x86/include/asm/microcode_intel.h +++ b/arch/x86/include/asm/microcode_intel.h @@ -52,6 +52,21 @@ struct extended_sigtable { #define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) +static inline u32 intel_get_microcode_revision(void) +{ + u32 rev, dummy; + + native_wrmsrl(MSR_IA32_UCODE_REV, 0); + + /* As documented in the SDM: Do a CPUID 1 here */ + native_cpuid_eax(1); + + /* get the current revision from MSR 0x8B */ + native_rdmsr(MSR_IA32_UCODE_REV, dummy, rev); + + return rev; +} + #ifdef CONFIG_MICROCODE_INTEL extern void __init load_ucode_intel_bsp(void); extern void load_ucode_intel_ap(void); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 2d49aa949fa1..203f860d2ab3 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -14,6 +14,7 @@ #include #include #include +#include #ifdef CONFIG_X86_64 #include @@ -78,14 +79,8 @@ static void early_init_intel(struct cpuinfo_x86 *c) (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - if (c->x86 >= 6 && !cpu_has(c, X86_FEATURE_IA64)) { - unsigned lower_word; - - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* Required by the SDM */ - native_cpuid_eax(1); - rdmsr(MSR_IA32_UCODE_REV, lower_word, c->microcode); - } + if (c->x86 >= 6 && !cpu_has(c, X86_FEATURE_IA64)) + c->microcode = intel_get_microcode_revision(); /* * Atom erratum AAE44/AAF40/AAG38/AAH41: diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index f79249fab389..faec8fa68ffd 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -390,15 +390,8 @@ static int collect_cpu_info_early(struct ucode_cpu_info *uci) native_rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); csig.pf = 1 << ((val[1] >> 18) & 7); } - native_wrmsrl(MSR_IA32_UCODE_REV, 0); - /* As documented in the SDM: Do a CPUID 1 here */ - native_cpuid_eax(1); - - /* get the current revision from MSR 0x8B */ - native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - - csig.rev = val[1]; + csig.rev = intel_get_microcode_revision(); uci->cpu_sig = csig; uci->valid = 1; @@ -582,7 +575,7 @@ static inline void print_ucode(struct ucode_cpu_info *uci) static int apply_microcode_early(struct ucode_cpu_info *uci, bool early) { struct microcode_intel *mc; - unsigned int val[2]; + u32 rev; mc = uci->mc; if (!mc) @@ -590,21 +583,16 @@ static int apply_microcode_early(struct ucode_cpu_info *uci, bool early) /* write microcode via MSR 0x79 */ native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits); - native_wrmsrl(MSR_IA32_UCODE_REV, 0); - /* As documented in the SDM: Do a CPUID 1 here */ - native_cpuid_eax(1); - - /* get the current revision from MSR 0x8B */ - native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - if (val[1] != mc->hdr.rev) + rev = intel_get_microcode_revision(); + if (rev != mc->hdr.rev) return -1; #ifdef CONFIG_X86_64 /* Flush global tlb. This is precaution. */ flush_tlb_early(); #endif - uci->cpu_sig.rev = val[1]; + uci->cpu_sig.rev = rev; if (early) print_ucode(uci); @@ -784,8 +772,8 @@ static int apply_microcode_intel(int cpu) struct microcode_intel *mc; struct ucode_cpu_info *uci; struct cpuinfo_x86 *c; - unsigned int val[2]; static int prev_rev; + u32 rev; /* We should bind the task to the CPU */ if (WARN_ON(raw_smp_processor_id() != cpu)) @@ -802,33 +790,28 @@ static int apply_microcode_intel(int cpu) /* write microcode via MSR 0x79 */ wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits); - wrmsrl(MSR_IA32_UCODE_REV, 0); - /* As documented in the SDM: Do a CPUID 1 here */ - native_cpuid_eax(1); + rev = intel_get_microcode_revision(); - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - - if (val[1] != mc->hdr.rev) { + if (rev != mc->hdr.rev) { pr_err("CPU%d update to revision 0x%x failed\n", cpu, mc->hdr.rev); return -1; } - if (val[1] != prev_rev) { + if (rev != prev_rev) { pr_info("updated to revision 0x%x, date = %04x-%02x-%02x\n", - val[1], + rev, mc->hdr.date & 0xffff, mc->hdr.date >> 24, (mc->hdr.date >> 16) & 0xff); - prev_rev = val[1]; + prev_rev = rev; } c = &cpu_data(cpu); - uci->cpu_sig.rev = val[1]; - c->microcode = val[1]; + uci->cpu_sig.rev = rev; + c->microcode = rev; return 0; } From 9fcf5ba2ef908af916e9002891fbbca20ce4dc98 Mon Sep 17 00:00:00 2001 From: Junichi Nomura Date: Mon, 9 Jan 2017 12:41:46 +0100 Subject: [PATCH 201/645] x86/microcode/intel: Fix allocation size of struct ucode_patch We allocate struct ucode_patch here. @size is the size of microcode data and used for kmemdup() later in this function. Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading") Signed-off-by: Jun'ichi Nomura Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/7a730dc9-ac17-35c4-fe76-dfc94e5ecd95@ce.jp.nec.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/microcode/intel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index faec8fa68ffd..943486589757 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -150,7 +150,7 @@ static struct ucode_patch *__alloc_microcode_buf(void *data, unsigned int size) { struct ucode_patch *p; - p = kzalloc(size, GFP_KERNEL); + p = kzalloc(sizeof(struct ucode_patch), GFP_KERNEL); if (!p) return ERR_PTR(-ENOMEM); From 2e86222c67bb5d942da68e8415749b32db208534 Mon Sep 17 00:00:00 2001 From: Junichi Nomura Date: Mon, 9 Jan 2017 12:41:47 +0100 Subject: [PATCH 202/645] x86/microcode/intel: Use correct buffer size for saving microcode data In generic_load_microcode(), curr_mc_size is the size of the last allocated buffer and since we have this performance "optimization" there to vmalloc a new buffer only when the current one is bigger, curr_mc_size ends up becoming the size of the biggest buffer we've seen so far. However, we end up saving the microcode patch which matches our CPU and its size is not curr_mc_size but the respective mc_size during the iteration while we're staring at it. So save that mc_size into a separate variable and use it to store the previously found microcode buffer. Without this fix, we could get oops like this: BUG: unable to handle kernel paging request at ffffc9000e30f000 IP: __memcpy+0x12/0x20 ... Call Trace: ? kmemdup+0x43/0x60 __alloc_microcode_buf+0x44/0x70 save_microcode_patch+0xd4/0x150 generic_load_microcode+0x1b8/0x260 request_microcode_user+0x15/0x20 microcode_write+0x91/0x100 __vfs_write+0x34/0x120 vfs_write+0xc1/0x130 SyS_write+0x56/0xc0 do_syscall_64+0x6c/0x160 entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading") Signed-off-by: Jun'ichi Nomura Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/4f33cbfd-44f2-9bed-3b66-7446cd14256f@ce.jp.nec.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/microcode/intel.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index 943486589757..3f329b74e040 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -823,7 +823,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, u8 *ucode_ptr = data, *new_mc = NULL, *mc = NULL; int new_rev = uci->cpu_sig.rev; unsigned int leftover = size; - unsigned int curr_mc_size = 0; + unsigned int curr_mc_size = 0, new_mc_size = 0; unsigned int csig, cpf; while (leftover) { @@ -864,6 +864,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, vfree(new_mc); new_rev = mc_header.rev; new_mc = mc; + new_mc_size = mc_size; mc = NULL; /* trigger new vmalloc */ } @@ -889,7 +890,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, * permanent memory. So it will be loaded early when a CPU is hot added * or resumes. */ - save_mc_for_early(new_mc, curr_mc_size); + save_mc_for_early(new_mc, new_mc_size); pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", cpu, new_rev, uci->cpu_sig.rev); From 318fa46cc60d37fec1e87dbf03a82aca0f5ce695 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 22 Dec 2016 10:44:30 +0100 Subject: [PATCH 203/645] clk/samsung: exynos542x: mark some clocks as critical Some parent clocks of the Exynos542x clock blocks, which have separate power domains (like DISP, MFC, MSC, GSC, FSYS and G2D) must be always enabled to access any register related to power management unit or devices connected to it. For the time being, until a proper solution based on runtime PM is applied, mark those clocks as critical (instead of ignore unused or even no flags) to prevent disabling them. Signed-off-by: Marek Szyprowski Acked-by: Sylwester Nawrocki Reviewed-by: Chanwoo Choi Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas [Exynos5800 Peach Pi Chromebook] Signed-off-by: Stephen Boyd --- drivers/clk/samsung/clk-exynos5420.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 8c8b495cbf0d..cdc092a1d9ef 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -586,7 +586,7 @@ static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = { GATE(CLK_ACLK550_CAM, "aclk550_cam", "mout_user_aclk550_cam", GATE_BUS_TOP, 24, 0, 0), GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler", - GATE_BUS_TOP, 27, 0, 0), + GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0), }; static const struct samsung_mux_clock exynos5420_mux_clks[] __initconst = { @@ -956,20 +956,20 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk333_g2d", GATE_IP_G2D, 7, 0, 0), GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys", - GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0), + GATE_BUS_FSYS0, 9, CLK_IS_CRITICAL, 0), GATE(0, "aclk200_fsys2", "mout_user_aclk200_fsys2", GATE_BUS_FSYS0, 10, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk333_g2d", "mout_user_aclk333_g2d", GATE_BUS_TOP, 0, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk266_g2d", "mout_user_aclk266_g2d", - GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0), + GATE_BUS_TOP, 1, CLK_IS_CRITICAL, 0), GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg", GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk333_432_isp0", "mout_user_aclk333_432_isp0", GATE_BUS_TOP, 5, 0, 0), GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl", - GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0), + GATE_BUS_TOP, 6, CLK_IS_CRITICAL, 0), GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl", GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0), GATE(0, "aclk333_432_isp", "mout_user_aclk333_432_isp", @@ -983,20 +983,20 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = { GATE(0, "aclk166", "mout_user_aclk166", GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0), GATE(CLK_ACLK333, "aclk333", "mout_user_aclk333", - GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0), + GATE_BUS_TOP, 15, CLK_IS_CRITICAL, 0), GATE(0, "aclk400_isp", "mout_user_aclk400_isp", GATE_BUS_TOP, 16, 0, 0), GATE(0, "aclk400_mscl", "mout_user_aclk400_mscl", GATE_BUS_TOP, 17, 0, 0), GATE(0, "aclk200_disp1", "mout_user_aclk200_disp1", - GATE_BUS_TOP, 18, 0, 0), + GATE_BUS_TOP, 18, CLK_IS_CRITICAL, 0), GATE(CLK_SCLK_MPHY_IXTAL24, "sclk_mphy_ixtal24", "mphy_refclk_ixtal24", GATE_BUS_TOP, 28, 0, 0), GATE(CLK_SCLK_HSIC_12M, "sclk_hsic_12m", "ff_hsic_12m", GATE_BUS_TOP, 29, 0, 0), GATE(0, "aclk300_disp1", "mout_user_aclk300_disp1", - SRC_MASK_TOP2, 24, 0, 0), + SRC_MASK_TOP2, 24, CLK_IS_CRITICAL, 0), GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk", SRC_MASK_TOP7, 20, 0, 0), From 3895dbf8985f656675b5bde610723a29cbce3fa7 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 3 Jan 2017 14:18:43 +1300 Subject: [PATCH 204/645] mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen Suggested-by: Al Viro Acked-by: Al Viro Signed-off-by: "Eric W. Biederman" --- fs/dcache.c | 7 ++++-- fs/namespace.c | 68 ++++++++++++++++++++++++++++++++++---------------- 2 files changed, 52 insertions(+), 23 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 769903dbc19d..95d71eda8142 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1336,8 +1336,11 @@ int d_set_mounted(struct dentry *dentry) } spin_lock(&dentry->d_lock); if (!d_unlinked(dentry)) { - dentry->d_flags |= DCACHE_MOUNTED; - ret = 0; + ret = -EBUSY; + if (!d_mountpoint(dentry)) { + dentry->d_flags |= DCACHE_MOUNTED; + ret = 0; + } } spin_unlock(&dentry->d_lock); out: diff --git a/fs/namespace.c b/fs/namespace.c index b5b1259e064f..487ba30bb5c6 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -742,26 +742,50 @@ static struct mountpoint *lookup_mountpoint(struct dentry *dentry) return NULL; } -static struct mountpoint *new_mountpoint(struct dentry *dentry) +static struct mountpoint *get_mountpoint(struct dentry *dentry) { - struct hlist_head *chain = mp_hash(dentry); - struct mountpoint *mp; + struct mountpoint *mp, *new = NULL; int ret; - mp = kmalloc(sizeof(struct mountpoint), GFP_KERNEL); - if (!mp) - return ERR_PTR(-ENOMEM); - - ret = d_set_mounted(dentry); - if (ret) { - kfree(mp); - return ERR_PTR(ret); + if (d_mountpoint(dentry)) { +mountpoint: + read_seqlock_excl(&mount_lock); + mp = lookup_mountpoint(dentry); + read_sequnlock_excl(&mount_lock); + if (mp) + goto done; } - mp->m_dentry = dentry; - mp->m_count = 1; - hlist_add_head(&mp->m_hash, chain); - INIT_HLIST_HEAD(&mp->m_list); + if (!new) + new = kmalloc(sizeof(struct mountpoint), GFP_KERNEL); + if (!new) + return ERR_PTR(-ENOMEM); + + + /* Exactly one processes may set d_mounted */ + ret = d_set_mounted(dentry); + + /* Someone else set d_mounted? */ + if (ret == -EBUSY) + goto mountpoint; + + /* The dentry is not available as a mountpoint? */ + mp = ERR_PTR(ret); + if (ret) + goto done; + + /* Add the new mountpoint to the hash table */ + read_seqlock_excl(&mount_lock); + new->m_dentry = dentry; + new->m_count = 1; + hlist_add_head(&new->m_hash, mp_hash(dentry)); + INIT_HLIST_HEAD(&new->m_list); + read_sequnlock_excl(&mount_lock); + + mp = new; + new = NULL; +done: + kfree(new); return mp; } @@ -1595,11 +1619,11 @@ void __detach_mounts(struct dentry *dentry) struct mount *mnt; namespace_lock(); + lock_mount_hash(); mp = lookup_mountpoint(dentry); if (IS_ERR_OR_NULL(mp)) goto out_unlock; - lock_mount_hash(); event++; while (!hlist_empty(&mp->m_list)) { mnt = hlist_entry(mp->m_list.first, struct mount, mnt_mp_list); @@ -1609,9 +1633,9 @@ void __detach_mounts(struct dentry *dentry) } else umount_tree(mnt, UMOUNT_CONNECTED); } - unlock_mount_hash(); put_mountpoint(mp); out_unlock: + unlock_mount_hash(); namespace_unlock(); } @@ -2038,9 +2062,7 @@ retry: namespace_lock(); mnt = lookup_mnt(path); if (likely(!mnt)) { - struct mountpoint *mp = lookup_mountpoint(dentry); - if (!mp) - mp = new_mountpoint(dentry); + struct mountpoint *mp = get_mountpoint(dentry); if (IS_ERR(mp)) { namespace_unlock(); inode_unlock(dentry->d_inode); @@ -2059,7 +2081,11 @@ retry: static void unlock_mount(struct mountpoint *where) { struct dentry *dentry = where->m_dentry; + + read_seqlock_excl(&mount_lock); put_mountpoint(where); + read_sequnlock_excl(&mount_lock); + namespace_unlock(); inode_unlock(dentry->d_inode); } @@ -3135,9 +3161,9 @@ SYSCALL_DEFINE2(pivot_root, const char __user *, new_root, touch_mnt_namespace(current->nsproxy->mnt_ns); /* A moved mount should not expire automatically */ list_del_init(&new_mnt->mnt_expire); + put_mountpoint(root_mp); unlock_mount_hash(); chroot_fs_refs(&root, &new); - put_mountpoint(root_mp); error = 0; out4: unlock_mount(old_mp); From 75422726b0f717d67db3283c2eb5bc14fa2619c5 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 4 Jan 2017 17:37:27 +1300 Subject: [PATCH 205/645] libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount Add MS_KERNMOUNT to the flags that are passed. Use sget_userns and force &init_user_ns instead of calling sget so that even if called from a weird context the internal filesystem will be considered to be in the intial user namespace. Luis Ressel reported that the the failure to pass MS_KERNMOUNT into mount_pseudo broke his in development graphics driver that uses the generic drm infrastructure. I am not certain the deriver was bug free in it's usage of that infrastructure but since mount_pseudo_xattr can never be triggered by userspace it is clearer and less error prone, and less problematic for the code to be explicit. Reported-by: Luis Ressel Tested-by: Luis Ressel Acked-by: Al Viro Signed-off-by: "Eric W. Biederman" --- fs/libfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/libfs.c b/fs/libfs.c index e973cd51f126..28d6f35feed6 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -245,7 +245,8 @@ struct dentry *mount_pseudo_xattr(struct file_system_type *fs_type, char *name, struct inode *root; struct qstr d_name = QSTR_INIT(name, strlen(name)); - s = sget(fs_type, NULL, set_anon_super, MS_NOUSER, NULL); + s = sget_userns(fs_type, NULL, set_anon_super, MS_KERNMOUNT|MS_NOUSER, + &init_user_ns, NULL); if (IS_ERR(s)) return ERR_CAST(s); From add7c65ca426b7a37184dd3d2172394e23d585d6 Mon Sep 17 00:00:00 2001 From: Andrei Vagin Date: Wed, 4 Jan 2017 19:28:14 -0800 Subject: [PATCH 206/645] pid: fix lockdep deadlock warning due to ucount_lock ========================================================= [ INFO: possible irq lock inversion dependency detected ] 4.10.0-rc2-00024-g4aecec9-dirty #118 Tainted: G W --------------------------------------------------------- swapper/1/0 just changed the state of lock: (&(&sighand->siglock)->rlock){-.....}, at: [] __lock_task_sighand+0xb6/0x2c0 but this lock took another, HARDIRQ-unsafe lock in the past: (ucounts_lock){+.+...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Chain exists of: &(&sighand->siglock)->rlock --> &(&tty->ctrl_lock)->rlock --> ucounts_lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ucounts_lock); local_irq_disable(); lock(&(&sighand->siglock)->rlock); lock(&(&tty->ctrl_lock)->rlock); lock(&(&sighand->siglock)->rlock); *** DEADLOCK *** This patch removes a dependency between rlock and ucount_lock. Fixes: f333c700c610 ("pidns: Add a limit on the number of pid namespaces") Cc: stable@vger.kernel.org Signed-off-by: Andrei Vagin Acked-by: Al Viro Signed-off-by: Eric W. Biederman --- kernel/pid_namespace.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index df9e8e9e0be7..eef2ce968636 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -151,8 +151,12 @@ out: static void delayed_free_pidns(struct rcu_head *p) { - kmem_cache_free(pid_ns_cachep, - container_of(p, struct pid_namespace, rcu)); + struct pid_namespace *ns = container_of(p, struct pid_namespace, rcu); + + dec_pid_namespaces(ns->ucounts); + put_user_ns(ns->user_ns); + + kmem_cache_free(pid_ns_cachep, ns); } static void destroy_pid_namespace(struct pid_namespace *ns) @@ -162,8 +166,6 @@ static void destroy_pid_namespace(struct pid_namespace *ns) ns_free_inum(&ns->ns); for (i = 0; i < PIDMAP_ENTRIES; i++) kfree(ns->pidmap[i].page); - dec_pid_namespaces(ns->ucounts); - put_user_ns(ns->user_ns); call_rcu(&ns->rcu, delayed_free_pidns); } From 93362fa47fe98b62e4a34ab408c4a418432e7939 Mon Sep 17 00:00:00 2001 From: Zhou Chengming Date: Fri, 6 Jan 2017 09:32:32 +0800 Subject: [PATCH 207/645] sysctl: Drop reference added by grab_header in proc_sys_readdir Fixes CVE-2016-9191, proc_sys_readdir doesn't drop reference added by grab_header when return from !dir_emit_dots path. It can cause any path called unregister_sysctl_table will wait forever. The calltrace of CVE-2016-9191: [ 5535.960522] Call Trace: [ 5535.963265] [] schedule+0x3f/0xa0 [ 5535.968817] [] schedule_timeout+0x3db/0x6f0 [ 5535.975346] [] ? wait_for_completion+0x45/0x130 [ 5535.982256] [] wait_for_completion+0xc3/0x130 [ 5535.988972] [] ? wake_up_q+0x80/0x80 [ 5535.994804] [] drop_sysctl_table+0xc4/0xe0 [ 5536.001227] [] drop_sysctl_table+0x77/0xe0 [ 5536.007648] [] unregister_sysctl_table+0x4d/0xa0 [ 5536.014654] [] unregister_sysctl_table+0x7f/0xa0 [ 5536.021657] [] unregister_sched_domain_sysctl+0x15/0x40 [ 5536.029344] [] partition_sched_domains+0x44/0x450 [ 5536.036447] [] ? __mutex_unlock_slowpath+0x111/0x1f0 [ 5536.043844] [] rebuild_sched_domains_locked+0x64/0xb0 [ 5536.051336] [] update_flag+0x11d/0x210 [ 5536.057373] [] ? mutex_lock_nested+0x2df/0x450 [ 5536.064186] [] ? cpuset_css_offline+0x1b/0x60 [ 5536.070899] [] ? trace_hardirqs_on+0xd/0x10 [ 5536.077420] [] ? mutex_lock_nested+0x2df/0x450 [ 5536.084234] [] ? css_killed_work_fn+0x25/0x220 [ 5536.091049] [] cpuset_css_offline+0x35/0x60 [ 5536.097571] [] css_killed_work_fn+0x5c/0x220 [ 5536.104207] [] process_one_work+0x1df/0x710 [ 5536.110736] [] ? process_one_work+0x160/0x710 [ 5536.117461] [] worker_thread+0x12b/0x4a0 [ 5536.123697] [] ? process_one_work+0x710/0x710 [ 5536.130426] [] kthread+0xfe/0x120 [ 5536.135991] [] ret_from_fork+0x1f/0x40 [ 5536.142041] [] ? kthread_create_on_node+0x230/0x230 One cgroup maintainer mentioned that "cgroup is trying to offline a cpuset css, which takes place under cgroup_mutex. The offlining ends up trying to drain active usages of a sysctl table which apprently is not happening." The real reason is that proc_sys_readdir doesn't drop reference added by grab_header when return from !dir_emit_dots path. So this cpuset offline path will wait here forever. See here for details: http://www.openwall.com/lists/oss-security/2016/11/04/13 Fixes: f0c3b5093add ("[readdir] convert procfs") Cc: stable@vger.kernel.org Reported-by: CAI Qian Tested-by: Yang Shukui Signed-off-by: Zhou Chengming Acked-by: Al Viro Signed-off-by: Eric W. Biederman --- fs/proc/proc_sysctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c index 55313d994895..d4e37acd4821 100644 --- a/fs/proc/proc_sysctl.c +++ b/fs/proc/proc_sysctl.c @@ -709,7 +709,7 @@ static int proc_sys_readdir(struct file *file, struct dir_context *ctx) ctl_dir = container_of(head, struct ctl_dir, header); if (!dir_emit_dots(file, ctx)) - return 0; + goto out; pos = 2; @@ -719,6 +719,7 @@ static int proc_sys_readdir(struct file *file, struct dir_context *ctx) break; } } +out: sysctl_head_finish(head); return 0; } From 6ab5c2b662e2dcbb964099bf7f19e9dbc9ae5a41 Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Tue, 3 Jan 2017 12:22:46 +0100 Subject: [PATCH 208/645] ARM: dts: imx6qdl-nitrogen6_max: fix sgtl5000 pinctrl init This patch fixes the following error: sgtl5000 0-000a: Error reading chip id -6 imx-sgtl5000 sound: ASoC: CODEC DAI sgtl5000 not registered imx-sgtl5000 sound: snd_soc_register_card failed (-517) The problem was that the pinctrl group was linked to the sound driver instead of the codec node. Since the codec is probed first, the sys_mclk was missing and it would therefore fail to initialize. Fixes: b32e700256bc ("ARM: dts: imx: add Boundary Devices Nitrogen6_Max board") Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 34887a10c5f1..47ba97229a48 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -319,8 +319,6 @@ compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_max-sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -402,6 +400,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; From 37530e74609a28ae3a3b51e7685fe54a00b1e2f2 Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Tue, 3 Jan 2017 12:22:47 +0100 Subject: [PATCH 209/645] ARM: dts: imx6qdl-nitrogen6_som2: fix sgtl5000 pinctrl init Since the codec is probed first, the pinctrl node should be under the codec node. The codec init was working for this board since U-Boot was already setting GPIO_0 as CLKO1 but better fix it anyway. Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index d80f21abea62..31d4cc62dbc7 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -250,8 +250,6 @@ compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_som2-sgtl5000"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sgtl5000>; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -320,6 +318,8 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; From 64cbff449a8ad11d72c2b437cb7412e70fc99654 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 28 Dec 2016 00:51:26 +0900 Subject: [PATCH 210/645] ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 3 Tree-wide replacement was done by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"), then the 2nd round by commit 15b7cc78f095 ("arm64: dts: drop "arm,amba-bus" in favor of "simple-bus" part 2"). Here, some new users have appeared for Linux v4.10-rc1. Eliminate them now. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm/boot/dts/qcom-mdm9615.dtsi | 2 +- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 5ae4ec59e6ea..c852b69229c9 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -357,7 +357,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 64226d5ae471..135890cd8a85 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1367,7 +1367,7 @@ }; amba { - compatible = "arm,amba-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; From c7702b8c22712a06080e10f1d2dee1a133ec8809 Mon Sep 17 00:00:00 2001 From: "Milan P. Gandhi" Date: Sat, 24 Dec 2016 22:02:46 +0530 Subject: [PATCH 211/645] scsi: qla2xxx: Get mutex lock before checking optrom_state There is a race condition with qla2xxx optrom functions where one thread might modify optrom buffer, optrom_state while other thread is still reading from it. In couple of crashes, it was found that we had successfully passed the following 'if' check where we confirm optrom_state to be QLA_SREADING. But by the time we acquired mutex lock to proceed with memory_read_from_buffer function, some other thread/process had already modified that option rom buffer and optrom_state from QLA_SREADING to QLA_SWAITING. Then we got ha->optrom_buffer 0x0 and crashed the system: if (ha->optrom_state != QLA_SREADING) return 0; mutex_lock(&ha->optrom_mutex); rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer, ha->optrom_region_size); mutex_unlock(&ha->optrom_mutex); With current optrom function we get following crash due to a race condition: [ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1479.466707] IP: [] memcpy+0x6/0x110 [...] [ 1479.473673] Call Trace: [ 1479.474296] [] ? memory_read_from_buffer+0x3c/0x60 [ 1479.474941] [] qla2x00_sysfs_read_optrom+0x9c/0xc0 [qla2xxx] [ 1479.475571] [] read+0xdb/0x1f0 [ 1479.476206] [] vfs_read+0x9e/0x170 [ 1479.476839] [] SyS_read+0x7f/0xe0 [ 1479.477466] [] system_call_fastpath+0x16/0x1b Below patch modifies qla2x00_sysfs_read_optrom, qla2x00_sysfs_write_optrom functions to get the mutex_lock before checking ha->optrom_state to avoid similar crashes. The patch was applied and tested and same crashes were no longer observed again. Tested-by: Milan P. Gandhi Signed-off-by: Milan P. Gandhi Reviewed-by: Laurence Oberman Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_attr.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 47eb4d545d13..83f8527c0363 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -243,12 +243,15 @@ qla2x00_sysfs_read_optrom(struct file *filp, struct kobject *kobj, struct qla_hw_data *ha = vha->hw; ssize_t rval = 0; - if (ha->optrom_state != QLA_SREADING) - return 0; - mutex_lock(&ha->optrom_mutex); + + if (ha->optrom_state != QLA_SREADING) + goto out; + rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer, ha->optrom_region_size); + +out: mutex_unlock(&ha->optrom_mutex); return rval; @@ -263,14 +266,19 @@ qla2x00_sysfs_write_optrom(struct file *filp, struct kobject *kobj, struct device, kobj))); struct qla_hw_data *ha = vha->hw; - if (ha->optrom_state != QLA_SWRITING) + mutex_lock(&ha->optrom_mutex); + + if (ha->optrom_state != QLA_SWRITING) { + mutex_unlock(&ha->optrom_mutex); return -EINVAL; - if (off > ha->optrom_region_size) + } + if (off > ha->optrom_region_size) { + mutex_unlock(&ha->optrom_mutex); return -ERANGE; + } if (off + count > ha->optrom_region_size) count = ha->optrom_region_size - off; - mutex_lock(&ha->optrom_mutex); memcpy(&ha->optrom_buffer[off], buf, count); mutex_unlock(&ha->optrom_mutex); From c3c4239465e11b2cc25fcf375c7909a342bcf4dc Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 27 Dec 2016 13:13:21 -0500 Subject: [PATCH 212/645] scsi: qla2xxx: Fix apparent cut-n-paste error. Commit 093df73771ba ("scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.") introduces two bodies of code that look similar but with s/req/rsp/ in the second instance. But in one case, it looks like this conversion was missed. Signed-off-by: Dave Jones Reviewed-by: Laurence Oberman Acked-by: Quinn Tran Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 8521cfe302e9..ad4edc13ebcf 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -466,7 +466,7 @@ static void qla2x00_free_queues(struct qla_hw_data *ha) continue; rsp = ha->rsp_q_map[cnt]; - clear_bit(cnt, ha->req_qid_map); + clear_bit(cnt, ha->rsp_qid_map); ha->rsp_q_map[cnt] = NULL; spin_unlock_irqrestore(&ha->hardware_lock, flags); qla2x00_free_rsp_que(ha, rsp); From 21d25f6a4217e755906cb548b55ddab39d0e88b9 Mon Sep 17 00:00:00 2001 From: Krister Johansen Date: Wed, 4 Jan 2017 01:22:52 -0800 Subject: [PATCH 213/645] dmaengine: iota: ioat_alloc_chan_resources should not perform sleeping allocations. On a kernel with DEBUG_LOCKS, ioat_free_chan_resources triggers an in_interrupt() warning. With PROVE_LOCKING, it reports detecting a SOFTIRQ-safe to SOFTIRQ-unsafe lock ordering in the same code path. This is because dma_generic_alloc_coherent() checks if the GFP flags permit blocking. It allocates from different subsystems if blocking is permitted. The free path knows how to return the memory to the correct allocator. If GFP_KERNEL is specified then the alloc and free end up going through cma_alloc(), which uses mutexes. Given that ioat_free_chan_resources() can be called in interrupt context, ioat_alloc_chan_resources() must specify GFP_NOWAIT so that the allocations do not block and instead use an allocator that uses spinlocks. Signed-off-by: Krister Johansen Acked-by: Dave Jiang Signed-off-by: Vinod Koul --- drivers/dma/ioat/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c index ace5cb2cb12f..cc5259b881d4 100644 --- a/drivers/dma/ioat/init.c +++ b/drivers/dma/ioat/init.c @@ -700,7 +700,7 @@ static int ioat_alloc_chan_resources(struct dma_chan *c) /* doing 2 32bit writes to mmio since 1 64b write doesn't work */ ioat_chan->completion = dma_pool_zalloc(ioat_chan->ioat_dma->completion_pool, - GFP_KERNEL, &ioat_chan->completion_dma); + GFP_NOWAIT, &ioat_chan->completion_dma); if (!ioat_chan->completion) return -ENOMEM; @@ -710,7 +710,7 @@ static int ioat_alloc_chan_resources(struct dma_chan *c) ioat_chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH); order = IOAT_MAX_ORDER; - ring = ioat_alloc_ring(c, order, GFP_KERNEL); + ring = ioat_alloc_ring(c, order, GFP_NOWAIT); if (!ring) return -ENOMEM; From 527a27591312e4b3a0f8179f321f9e85c0850df0 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 9 Jan 2017 16:50:52 +0200 Subject: [PATCH 214/645] dmaengine: omap-dma: Fix the port_window support We do not yet have users of port_window. The following errors were found when converting the tusb6010_omap.c musb driver: - The peripheral side must have SRC_/DST_PACKED disabled - when configuring the burst for the peripheral side the memory side configuration were overwritten: d->csdp = ... -> d->csdp |= ... - The EI and FI were configured for the wrong sides of the transfers. With these changes and the converted tus6010_omap.c I was able to verify that things are working as they expected to work. Fixes: 201ac4861c19 ("dmaengine: omap-dma: Support for slave devices with data port window") Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul --- drivers/dma/omap-dma.c | 41 +++++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index 4ad101a47e0a..daf479cce691 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -938,6 +938,23 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( d->ccr |= CCR_DST_AMODE_POSTINC; if (port_window) { d->ccr |= CCR_SRC_AMODE_DBLIDX; + + if (port_window_bytes >= 64) + d->csdp |= CSDP_SRC_BURST_64; + else if (port_window_bytes >= 32) + d->csdp |= CSDP_SRC_BURST_32; + else if (port_window_bytes >= 16) + d->csdp |= CSDP_SRC_BURST_16; + + } else { + d->ccr |= CCR_SRC_AMODE_CONSTANT; + } + } else { + d->csdp = CSDP_SRC_BURST_64 | CSDP_SRC_PACKED; + + d->ccr |= CCR_SRC_AMODE_POSTINC; + if (port_window) { + d->ccr |= CCR_DST_AMODE_DBLIDX; d->ei = 1; /* * One frame covers the port_window and by configure @@ -948,27 +965,11 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( d->fi = -(port_window_bytes - 1); if (port_window_bytes >= 64) - d->csdp = CSDP_SRC_BURST_64 | CSDP_SRC_PACKED; + d->csdp |= CSDP_DST_BURST_64; else if (port_window_bytes >= 32) - d->csdp = CSDP_SRC_BURST_32 | CSDP_SRC_PACKED; + d->csdp |= CSDP_DST_BURST_32; else if (port_window_bytes >= 16) - d->csdp = CSDP_SRC_BURST_16 | CSDP_SRC_PACKED; - } else { - d->ccr |= CCR_SRC_AMODE_CONSTANT; - } - } else { - d->csdp = CSDP_SRC_BURST_64 | CSDP_SRC_PACKED; - - d->ccr |= CCR_SRC_AMODE_POSTINC; - if (port_window) { - d->ccr |= CCR_DST_AMODE_DBLIDX; - - if (port_window_bytes >= 64) - d->csdp = CSDP_DST_BURST_64 | CSDP_DST_PACKED; - else if (port_window_bytes >= 32) - d->csdp = CSDP_DST_BURST_32 | CSDP_DST_PACKED; - else if (port_window_bytes >= 16) - d->csdp = CSDP_DST_BURST_16 | CSDP_DST_PACKED; + d->csdp |= CSDP_DST_BURST_16; } else { d->ccr |= CCR_DST_AMODE_CONSTANT; } @@ -1017,7 +1018,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( osg->addr = sg_dma_address(sgent); osg->en = en; osg->fn = sg_dma_len(sgent) / frame_bytes; - if (port_window && dir == DMA_MEM_TO_DEV) { + if (port_window && dir == DMA_DEV_TO_MEM) { osg->ei = 1; /* * One frame covers the port_window and by configure From 497de07d89c1410d76a15bec2bb41f24a2a89f31 Mon Sep 17 00:00:00 2001 From: Gu Zheng Date: Mon, 9 Jan 2017 09:34:48 +0800 Subject: [PATCH 215/645] tmpfs: clear S_ISGID when setting posix ACLs This change was missed the tmpfs modification in In CVE-2016-7097 commit 073931017b49 ("posix_acl: Clear SGID bit when setting file permissions") It can test by xfstest generic/375, which failed to clear setgid bit in the following test case on tmpfs: touch $testfile chown 100:100 $testfile chmod 2755 $testfile _runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile Signed-off-by: Gu Zheng Signed-off-by: Al Viro --- fs/posix_acl.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/fs/posix_acl.c b/fs/posix_acl.c index 595522022aca..c9d48dc78495 100644 --- a/fs/posix_acl.c +++ b/fs/posix_acl.c @@ -922,11 +922,10 @@ int simple_set_acl(struct inode *inode, struct posix_acl *acl, int type) int error; if (type == ACL_TYPE_ACCESS) { - error = posix_acl_equiv_mode(acl, &inode->i_mode); - if (error < 0) - return 0; - if (error == 0) - acl = NULL; + error = posix_acl_update_mode(inode, + &inode->i_mode, &acl); + if (error) + return error; } inode->i_ctime = current_time(inode); From 68f458eec7069d618a6c884ca007426e0cea411b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 9 Jan 2017 16:31:58 +0200 Subject: [PATCH 216/645] drm: Schedule the output_poll_work with 1s delay if we have delayed event Instead of scheduling the work to handle the initial delayed event, use 1s delay. This delay should not be needed, but Optimus/nouveau will fail in a mysterious way if the delayed event is handled as soon as possible like it is done in drm_helper_probe_single_connector_modes() in case the poll was enabled before. Reverting 339fd36238dd would give back the 10 sec (!) delay to handle the delayed event. Adding 1sec delay to the poll_work is enough to work around the issue in Optimus setups and gives shorter response on handling the initial delayed event. Fixes: 339fd36238dd ("drm: drm_probe_helper: Fix output_poll_work scheduling") Cc: stable@vger.kernel.org # v4.9 Signed-off-by: Peter Ujfalusi [danvet: Add FIXME to the comment to make it stick out more.] Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170109143158.21917-1-peter.ujfalusi@ti.com --- drivers/gpu/drm/drm_probe_helper.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index ac953f037be7..cf8f0128c161 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -143,8 +143,18 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev) } if (dev->mode_config.delayed_event) { + /* + * FIXME: + * + * Use short (1s) delay to handle the initial delayed event. + * This delay should not be needed, but Optimus/nouveau will + * fail in a mysterious way if the delayed event is handled as + * soon as possible like it is done in + * drm_helper_probe_single_connector_modes() in case the poll + * was enabled before. + */ poll = true; - delay = 0; + delay = HZ; } if (poll) From 2e40795c3bf344cfb5220d94566205796e3ef19a Mon Sep 17 00:00:00 2001 From: Dennis Kadioglu Date: Mon, 9 Jan 2017 17:10:46 +0100 Subject: [PATCH 217/645] ALSA: usb-audio: Add a quirk for Plantronics BT600 Plantronics BT600 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1" and "cannot get freq at ep 0x82". This patch adds the USB ID of the BT600 to quirks.c and avoids those error messages. Signed-off-by: Dennis Kadioglu Cc: Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index b3fd2382fdd9..eb4b9f7a571e 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1135,6 +1135,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) case USB_ID(0x045E, 0x076F): /* MS Lifecam HD-6000 */ case USB_ID(0x045E, 0x0772): /* MS Lifecam Studio */ case USB_ID(0x045E, 0x0779): /* MS Lifecam HD-3000 */ + case USB_ID(0x047F, 0x02F7): /* Plantronics BT-600 */ case USB_ID(0x047F, 0x0415): /* Plantronics BT-300 */ case USB_ID(0x047F, 0xAA05): /* Plantronics DA45 */ case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ From 19a91dd4e39e755d650444da7f3a571b40a11093 Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Fri, 23 Dec 2016 16:01:08 +0100 Subject: [PATCH 218/645] MMC: meson: avoid possible NULL dereference No actual segmentation faults were observed but the coding is at least inconsistent. irqreturn_t meson_mmc_irq(): We should not dereference host before checking it. meson_mmc_irq_thread(): If cmd or mrq are NULL we should not dereference them after writing a warning. Fixes: 51c5d8447bd7 MMC: meson: initial support for GX platforms Signed-off-by: Heinrich Schuchardt Acked-by: Kevin Hilman Signed-off-by: Ulf Hansson --- drivers/mmc/host/meson-gx-mmc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index b352760c041e..09739352834c 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -578,13 +578,15 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) { struct meson_host *host = dev_id; struct mmc_request *mrq; - struct mmc_command *cmd = host->cmd; + struct mmc_command *cmd; u32 irq_en, status, raw_status; irqreturn_t ret = IRQ_HANDLED; if (WARN_ON(!host)) return IRQ_NONE; + cmd = host->cmd; + mrq = host->mrq; if (WARN_ON(!mrq)) @@ -670,10 +672,10 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) int ret = IRQ_HANDLED; if (WARN_ON(!mrq)) - ret = IRQ_NONE; + return IRQ_NONE; if (WARN_ON(!cmd)) - ret = IRQ_NONE; + return IRQ_NONE; data = cmd->data; if (data) { From 71d3f6ef7f5af38dea2975ec5715c88bae92e92d Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Mon, 28 Nov 2016 08:52:20 +0100 Subject: [PATCH 219/645] drm/virtio: fix framebuffer sparse warning virtio uses normal ram as backing storage for the framebuffer, so we should assign the address to new screen_buffer (added by commit 17a7b0b4d9749f80d365d7baff5dec2f54b0e992) instead of screen_base. Reported-by: Michael S. Tsirkin Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/virtio/virtgpu_fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/virtio/virtgpu_fb.c b/drivers/gpu/drm/virtio/virtgpu_fb.c index dd21f950e129..cde9f3758106 100644 --- a/drivers/gpu/drm/virtio/virtgpu_fb.c +++ b/drivers/gpu/drm/virtio/virtgpu_fb.c @@ -331,7 +331,7 @@ static int virtio_gpufb_create(struct drm_fb_helper *helper, info->fbops = &virtio_gpufb_ops; info->pixmap.flags = FB_PIXMAP_SYSTEM; - info->screen_base = obj->vmap; + info->screen_buffer = obj->vmap; info->screen_size = obj->gem_base.size; drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth); drm_fb_helper_fill_var(info, &vfbdev->helper, From 0c19f97f12bbb1c2370cb62e31d0f749642937ee Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Mon, 21 Nov 2016 19:00:30 +0100 Subject: [PATCH 220/645] drm: update MAINTAINERS for qemu drivers (bochs, cirrus, qxl, virtio-gpu) Changes: * add myself as maintainer, so patches land in my inbox. * add virtualization@lists.linux-foundation.org mailing list. * add drm-qemu git repo. * flip bochs and qxl status to "Maintained". Signed-off-by: Gerd Hoffmann --- MAINTAINERS | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5f0420a0da5b..15eadc8c58c9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4106,11 +4106,16 @@ F: drivers/gpu/drm/bridge/ DRM DRIVER FOR BOCHS VIRTUAL GPU M: Gerd Hoffmann -S: Odd Fixes +L: virtualization@lists.linux-foundation.org +T: git git://git.kraxel.org/linux drm-qemu +S: Maintained F: drivers/gpu/drm/bochs/ DRM DRIVER FOR QEMU'S CIRRUS DEVICE M: Dave Airlie +M: Gerd Hoffmann +L: virtualization@lists.linux-foundation.org +T: git git://git.kraxel.org/linux drm-qemu S: Odd Fixes F: drivers/gpu/drm/cirrus/ @@ -4304,7 +4309,10 @@ F: Documentation/devicetree/bindings/display/renesas,du.txt DRM DRIVER FOR QXL VIRTUAL GPU M: Dave Airlie -S: Odd Fixes +M: Gerd Hoffmann +L: virtualization@lists.linux-foundation.org +T: git git://git.kraxel.org/linux drm-qemu +S: Maintained F: drivers/gpu/drm/qxl/ F: include/uapi/drm/qxl_drm.h @@ -13085,6 +13093,7 @@ M: David Airlie M: Gerd Hoffmann L: dri-devel@lists.freedesktop.org L: virtualization@lists.linux-foundation.org +T: git git://git.kraxel.org/linux drm-qemu S: Maintained F: drivers/gpu/drm/virtio/ F: include/uapi/linux/virtio_gpu.h From af3076e67c31ceb3e314933dd61cb68a1d5120cf Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Mon, 21 Nov 2016 19:32:06 +0100 Subject: [PATCH 221/645] drm: flip cirrus driver status to "obsolete". Also update Kconfig help text, explaining things: Cirrus is obsolete, the hardware was designed in the 90ies and can't keep up with todays needs. More background: https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/ Better alternatives are: - stdvga (DRM_BOCHS, qemu -vga std, default in qemu 2.2+) - qxl (DRM_QXL, qemu -vga qxl, works best with spice) - virtio (VIRTIO_GPU), qemu -vga virtio) Signed-off-by: Gerd Hoffmann --- MAINTAINERS | 3 ++- drivers/gpu/drm/cirrus/Kconfig | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 15eadc8c58c9..b8e2bbe621a3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4116,7 +4116,8 @@ M: Dave Airlie M: Gerd Hoffmann L: virtualization@lists.linux-foundation.org T: git git://git.kraxel.org/linux drm-qemu -S: Odd Fixes +S: Obsolete +W: https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/ F: drivers/gpu/drm/cirrus/ RADEON and AMDGPU DRM DRIVERS diff --git a/drivers/gpu/drm/cirrus/Kconfig b/drivers/gpu/drm/cirrus/Kconfig index 04b3c161dfae..7f4cc6e172ab 100644 --- a/drivers/gpu/drm/cirrus/Kconfig +++ b/drivers/gpu/drm/cirrus/Kconfig @@ -7,3 +7,12 @@ config DRM_CIRRUS_QEMU This is a KMS driver for emulated cirrus device in qemu. It is *NOT* intended for real cirrus devices. This requires the modesetting userspace X.org driver. + + Cirrus is obsolete, the hardware was designed in the 90ies + and can't keep up with todays needs. More background: + https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/ + + Better alternatives are: + - stdvga (DRM_BOCHS, qemu -vga std, default in qemu 2.2+) + - qxl (DRM_QXL, qemu -vga qxl, works best with spice) + - virtio (DRM_VIRTIO_GPU), qemu -vga virtio) From a782b5f986c3fa1cfa7f2b57941200c6a5809242 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Wed, 4 Jan 2017 14:32:30 -0500 Subject: [PATCH 222/645] PCI: designware: Check for iATU unroll only on platforms that use ATU Previously we checked for iATU unroll support by reading PCIE_ATU_VIEWPORT even on platforms, e.g., Keystone, that do not have ATU ports. This can cause bad behavior such as asynchronous external aborts: OF: PCI: MEM 0x60000000..0x6fffffff -> 0x60000000 Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 pgd = c0003000 [00000000] *pgd=80000800004003, *pmd=00000000 Internal error: : 1211 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-00009-g6ff59d2-dirty #7 Hardware name: Keystone task: eb878000 task.stack: eb866000 PC is at dw_pcie_setup_rc+0x24/0x380 LR is at ks_pcie_host_init+0x10/0x170 Move the dw_pcie_iatu_unroll_enabled() check so we only call it on platforms that do not use the ATU. These platforms supply their own ->rd_other_conf() and ->wr_other_conf() methods. [bhelgaas: changelog] Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature") Fixes: 416379f9ebde ("PCI: designware: Check for iATU unroll support after initializing host") Tested-by: Kishon Vijay Abraham I Signed-off-by: Murali Karicheri Signed-off-by: Bjorn Helgaas Acked-By: Joao Pinto CC: stable@vger.kernel.org # v4.9+ --- drivers/pci/host/pcie-designware.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index bed19994c1e9..af8f6e92e885 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -807,11 +807,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp) { u32 val; - /* get iATU unroll support */ - pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); - dev_dbg(pp->dev, "iATU unroll: %s\n", - pp->iatu_unroll_enabled ? "enabled" : "disabled"); - /* set the number of lanes */ val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_MODE_MASK; @@ -882,6 +877,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) * we should not program the ATU here. */ if (!pp->ops->rd_other_conf) { + /* get iATU unroll support */ + pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); + dev_dbg(pp->dev, "iATU unroll: %s\n", + pp->iatu_unroll_enabled ? "enabled" : "disabled"); + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0, PCIE_ATU_TYPE_MEM, pp->mem_base, pp->mem_bus_addr, pp->mem_size); From 146cc8a17a3b4996f6805ee5c080e7101277c410 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 10 Jan 2017 12:05:37 +0100 Subject: [PATCH 223/645] USB: serial: kl5kusb105: fix line-state error handling The current implementation failed to detect short transfers when attempting to read the line state, and also, to make things worse, logged the content of the uninitialised heap transfer buffer. Fixes: abf492e7b3ae ("USB: kl5kusb105: fix DMA buffers on stack") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/kl5kusb105.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 0ee190fc1bf8..6cb45757818f 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, status_buf, KLSI_STATUSBUF_LEN, 10000 ); - if (rc < 0) - dev_err(&port->dev, "Reading line status failed (error = %d)\n", - rc); - else { + if (rc != KLSI_STATUSBUF_LEN) { + dev_err(&port->dev, "reading line status failed: %d\n", rc); + if (rc >= 0) + rc = -EIO; + } else { status = get_unaligned_le16(status_buf); dev_info(&port->serial->dev->dev, "read status %x %x\n", From 620f1a632ebcc9811c2f8009ba52297c7006f805 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 13 Dec 2016 18:50:13 -0800 Subject: [PATCH 224/645] wusbcore: Fix one more crypto-on-the-stack bug The driver put a constant buffer of all zeros on the stack and pointed a scatterlist entry at it. This doesn't work with virtual stacks. Use ZERO_PAGE instead. Cc: stable@vger.kernel.org # 4.9 only Reported-by: Eric Biggers Signed-off-by: Andy Lutomirski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/wusbcore/crypto.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index 79451f7ef1b7..062c205f0046 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -216,7 +216,6 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc, struct scatterlist sg[4], sg_dst; void *dst_buf; size_t dst_size; - const u8 bzero[16] = { 0 }; u8 iv[crypto_skcipher_ivsize(tfm_cbc)]; size_t zero_padding; @@ -261,7 +260,7 @@ static int wusb_ccm_mac(struct crypto_skcipher *tfm_cbc, sg_set_buf(&sg[1], &scratch->b1, sizeof(scratch->b1)); sg_set_buf(&sg[2], b, blen); /* 0 if well behaved :) */ - sg_set_buf(&sg[3], bzero, zero_padding); + sg_set_page(&sg[3], ZERO_PAGE(0), zero_padding, 0); sg_init_one(&sg_dst, dst_buf, dst_size); skcipher_request_set_tfm(req, tfm_cbc); From dc647ec88e029307e60e6bf9988056605f11051a Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 10 Jan 2017 09:30:51 +0100 Subject: [PATCH 225/645] net: socket: Make unnecessarily global sockfs_setattr() static MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make sockfs_setattr() static as it is not used outside of net/socket.c This fixes the following GCC warning: net/socket.c:534:5: warning: no previous prototype for ‘sockfs_setattr’ [-Wmissing-prototypes] Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Cc: Lorenzo Colitti Signed-off-by: Tobias Klauser Acked-by: Lorenzo Colitti Signed-off-by: David S. Miller --- net/socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/socket.c b/net/socket.c index a8c2307590b8..0758e13754e2 100644 --- a/net/socket.c +++ b/net/socket.c @@ -533,7 +533,7 @@ static ssize_t sockfs_listxattr(struct dentry *dentry, char *buffer, return used; } -int sockfs_setattr(struct dentry *dentry, struct iattr *iattr) +static int sockfs_setattr(struct dentry *dentry, struct iattr *iattr) { int err = simple_setattr(dentry, iattr); From e864212078ded276bdb272b2e0ee6a979357ca8a Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Fri, 23 Dec 2016 11:37:53 +0100 Subject: [PATCH 226/645] target: add XCOPY target/segment desc sense codes As defined in http://www.t10.org/lists/asc-num.htm. To be used during validation of XCOPY target and segment descriptor lists. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_transport.c | 24 ++++++++++++++++++++++++ include/target/target_core_base.h | 4 ++++ 2 files changed, 28 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 7dfefd66df93..1cadc9eefa21 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1693,6 +1693,10 @@ void transport_generic_request_failure(struct se_cmd *cmd, case TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED: case TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED: case TCM_COPY_TARGET_DEVICE_NOT_REACHABLE: + case TCM_TOO_MANY_TARGET_DESCS: + case TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE: + case TCM_TOO_MANY_SEGMENT_DESCS: + case TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE: break; case TCM_OUT_OF_RESOURCES: sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; @@ -2808,6 +2812,26 @@ static const struct sense_info sense_info_table[] = { .key = ILLEGAL_REQUEST, .asc = 0x26, /* INVALID FIELD IN PARAMETER LIST */ }, + [TCM_TOO_MANY_TARGET_DESCS] = { + .key = ILLEGAL_REQUEST, + .asc = 0x26, + .ascq = 0x06, /* TOO MANY TARGET DESCRIPTORS */ + }, + [TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE] = { + .key = ILLEGAL_REQUEST, + .asc = 0x26, + .ascq = 0x07, /* UNSUPPORTED TARGET DESCRIPTOR TYPE CODE */ + }, + [TCM_TOO_MANY_SEGMENT_DESCS] = { + .key = ILLEGAL_REQUEST, + .asc = 0x26, + .ascq = 0x08, /* TOO MANY SEGMENT DESCRIPTORS */ + }, + [TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE] = { + .key = ILLEGAL_REQUEST, + .asc = 0x26, + .ascq = 0x09, /* UNSUPPORTED SEGMENT DESCRIPTOR TYPE CODE */ + }, [TCM_PARAMETER_LIST_LENGTH_ERROR] = { .key = ILLEGAL_REQUEST, .asc = 0x1a, /* PARAMETER LIST LENGTH ERROR */ diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 29e6858bb164..43edf82e54ff 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -174,6 +174,10 @@ enum tcm_sense_reason_table { TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED = R(0x16), TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED = R(0x17), TCM_COPY_TARGET_DEVICE_NOT_REACHABLE = R(0x18), + TCM_TOO_MANY_TARGET_DESCS = R(0x19), + TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE = R(0x1a), + TCM_TOO_MANY_SEGMENT_DESCS = R(0x1b), + TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE = R(0x1c), #undef R }; From 61c359194c46cbffec9a1f2c59c1c4011222ad84 Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Fri, 23 Dec 2016 11:37:54 +0100 Subject: [PATCH 227/645] target: use XCOPY TOO MANY TARGET DESCRIPTORS sense spc4r37 6.4.3.4 states: If the number of CSCD descriptors exceeds the allowed number, the copy manager shall terminate the command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to TOO MANY TARGET DESCRIPTORS. LIO currently responds with INVALID FIELD IN PARAMETER LIST, which sees it fail the libiscsi ExtendedCopy.DescrLimits test. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 37d5caebffa6..db265ad10fa4 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -201,9 +201,11 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, " multiple of %d\n", XCOPY_TARGET_DESC_LEN); return -EINVAL; } - if (tdll > 64) { + if (tdll > RCR_OP_MAX_TARGET_DESC_COUNT * XCOPY_TARGET_DESC_LEN) { pr_err("XCOPY target descriptor supports a maximum" " two src/dest descriptors, tdll: %hu too large..\n", tdll); + /* spc4r37 6.4.3.4 CSCD DESCRIPTOR LIST LENGTH field */ + *sense_ret = TCM_TOO_MANY_TARGET_DESCS; return -EINVAL; } /* From af9f62c1686268c0517b289274d38f3a03bebd2a Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Fri, 23 Dec 2016 11:37:55 +0100 Subject: [PATCH 228/645] target: bounds check XCOPY segment descriptor list Check the length of the XCOPY request segment descriptor list against the value advertised via the MAXIMUM SEGMENT DESCRIPTOR COUNT field in the RECEIVE COPY OPERATING PARAMETERS response. spc4r37 6.4.3.5 states: If the number of segment descriptors exceeds the allowed number, the copy manager shall terminate the command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to TOO MANY SEGMENT DESCRIPTORS. This functionality is testable using the libiscsi ExtendedCopy.DescrLimits test. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index db265ad10fa4..da0f2da732e7 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -308,17 +308,26 @@ static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd, struct xcopy_op *xop, unsigned char *p, - unsigned int sdll) + unsigned int sdll, sense_reason_t *sense_ret) { unsigned char *desc = p; unsigned int start = 0; int offset = sdll % XCOPY_SEGMENT_DESC_LEN, rc, ret = 0; + *sense_ret = TCM_INVALID_PARAMETER_LIST; + if (offset != 0) { pr_err("XCOPY segment descriptor list length is not" " multiple of %d\n", XCOPY_SEGMENT_DESC_LEN); return -EINVAL; } + if (sdll > RCR_OP_MAX_SG_DESC_COUNT * XCOPY_SEGMENT_DESC_LEN) { + pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too" + " large..\n", RCR_OP_MAX_SG_DESC_COUNT, sdll); + /* spc4r37 6.4.3.5 SEGMENT DESCRIPTOR LIST LENGTH field */ + *sense_ret = TCM_TOO_MANY_SEGMENT_DESCS; + return -EINVAL; + } while (start < sdll) { /* @@ -916,7 +925,8 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) seg_desc = &p[16]; seg_desc += (rc * XCOPY_TARGET_DESC_LEN); - rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc, sdll); + rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc, + sdll, &ret); if (rc <= 0) { xcopy_pt_undepend_remotedev(xop); goto out; From 7d38706669ce00603b187f667a4eb67c94eac098 Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Fri, 23 Dec 2016 11:37:56 +0100 Subject: [PATCH 229/645] target: bounds check XCOPY total descriptor list length spc4r37 6.4.3.5 states: If the combined length of the CSCD descriptors and segment descriptors exceeds the allowed value, then the copy manager shall terminate the command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to PARAMETER LIST LENGTH ERROR. This functionality can be tested using the libiscsi ExtendedCopy.DescrLimits test. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index da0f2da732e7..0d10fcf438d1 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -894,6 +894,12 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) */ tdll = get_unaligned_be16(&p[2]); sdll = get_unaligned_be32(&p[8]); + if (tdll + sdll > RCR_OP_MAX_DESC_LIST_LEN) { + pr_err("XCOPY descriptor list length %u exceeds maximum %u\n", + tdll + sdll, RCR_OP_MAX_DESC_LIST_LEN); + ret = TCM_PARAMETER_LIST_LENGTH_ERROR; + goto out; + } inline_dl = get_unaligned_be32(&p[12]); if (inline_dl != 0) { From c243849720ac237e9e7191fe57f619bb3a871d4c Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Mon, 2 Jan 2017 18:04:04 +0100 Subject: [PATCH 230/645] target: return UNSUPPORTED TARGET/SEGMENT DESC TYPE CODE sense Use UNSUPPORTED TARGET DESCRIPTOR TYPE CODE and UNSUPPORTED SEGMENT DESCRIPTOR TYPE CODE additional sense codes if a descriptor type in an XCOPY request is not supported, as specified in spc4r37 6.4.5 and 6.4.6. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 0d10fcf438d1..52738a108e5f 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -199,6 +199,7 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, if (offset != 0) { pr_err("XCOPY target descriptor list length is not" " multiple of %d\n", XCOPY_TARGET_DESC_LEN); + *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; return -EINVAL; } if (tdll > RCR_OP_MAX_TARGET_DESC_COUNT * XCOPY_TARGET_DESC_LEN) { @@ -240,6 +241,7 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, default: pr_err("XCOPY unsupported descriptor type code:" " 0x%02x\n", desc[0]); + *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE; goto out; } } @@ -319,6 +321,7 @@ static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd, if (offset != 0) { pr_err("XCOPY segment descriptor list length is not" " multiple of %d\n", XCOPY_SEGMENT_DESC_LEN); + *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; return -EINVAL; } if (sdll > RCR_OP_MAX_SG_DESC_COUNT * XCOPY_SEGMENT_DESC_LEN) { @@ -346,6 +349,7 @@ static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd, default: pr_err("XCOPY unsupported segment descriptor" "type: 0x%02x\n", desc[0]); + *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE; goto out; } } From 94aae4caacda89a1bdb7198b260f4ca3595b7ed7 Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Mon, 2 Jan 2017 18:04:05 +0100 Subject: [PATCH 231/645] target: simplify XCOPY wwn->se_dev lookup helper target_xcopy_locate_se_dev_e4() is used to locate an se_dev, based on the WWN provided with the XCOPY request. Remove a couple of unneeded arguments, and rely on the caller for the src/dst test. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 52738a108e5f..155db18ee4e7 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -53,18 +53,13 @@ static int target_xcopy_gen_naa_ieee(struct se_device *dev, unsigned char *buf) return 0; } -static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op *xop, - bool src) +static int target_xcopy_locate_se_dev_e4(const unsigned char *dev_wwn, + struct se_device **found_dev) { struct se_device *se_dev; - unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN], *dev_wwn; + unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN]; int rc; - if (src) - dev_wwn = &xop->dst_tid_wwn[0]; - else - dev_wwn = &xop->src_tid_wwn[0]; - mutex_lock(&g_device_mutex); list_for_each_entry(se_dev, &g_device_list, g_dev_node) { @@ -78,15 +73,8 @@ static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op if (rc != 0) continue; - if (src) { - xop->dst_dev = se_dev; - pr_debug("XCOPY 0xe4: Setting xop->dst_dev: %p from located" - " se_dev\n", xop->dst_dev); - } else { - xop->src_dev = se_dev; - pr_debug("XCOPY 0xe4: Setting xop->src_dev: %p from located" - " se_dev\n", xop->src_dev); - } + *found_dev = se_dev; + pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev); rc = target_depend_item(&se_dev->dev_group.cg_item); if (rc != 0) { @@ -247,9 +235,11 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, } if (xop->op_origin == XCOL_SOURCE_RECV_OP) - rc = target_xcopy_locate_se_dev_e4(se_cmd, xop, true); + rc = target_xcopy_locate_se_dev_e4(xop->dst_tid_wwn, + &xop->dst_dev); else - rc = target_xcopy_locate_se_dev_e4(se_cmd, xop, false); + rc = target_xcopy_locate_se_dev_e4(xop->src_tid_wwn, + &xop->src_dev); /* * If a matching IEEE NAA 0x83 descriptor for the requested device * is not located on this node, return COPY_ABORTED with ASQ/ASQC From f184210bca6c9d0091ff5e5629dea4cbb8a17c0f Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Mon, 2 Jan 2017 18:04:06 +0100 Subject: [PATCH 232/645] target: check XCOPY segment descriptor CSCD IDs Ensure that the segment descriptor CSCD descriptor ID values correspond to CSCD descriptor entries located in the XCOPY command parameter list. SPC4r37 6.4.6.1 Table 150 specifies this range as 0000h to 07FFh, where the CSCD descriptor location in the parameter list can be located via: 16 + (id * 32) Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig [ bvanassche: inserted "; " in the format string of an error message and also moved a "||" operator from the start of a line to the end of the previous line ] Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 8 ++++++++ drivers/target/target_core_xcopy.h | 6 ++++++ 2 files changed, 14 insertions(+) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 155db18ee4e7..41a2a8ad1046 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -278,6 +278,14 @@ static int target_xcopy_parse_segdesc_02(struct se_cmd *se_cmd, struct xcopy_op xop->stdi = get_unaligned_be16(&desc[4]); xop->dtdi = get_unaligned_be16(&desc[6]); + + if (xop->stdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX || + xop->dtdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX) { + pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n", + XCOPY_CSCD_DESC_ID_LIST_OFF_MAX, xop->stdi, xop->dtdi); + return -EINVAL; + } + pr_debug("XCOPY seg desc 0x02: desc_len: %hu stdi: %hu dtdi: %hu, DC: %d\n", desc_len, xop->stdi, xop->dtdi, dc); diff --git a/drivers/target/target_core_xcopy.h b/drivers/target/target_core_xcopy.h index 4d3d4dd060f2..e2d141140342 100644 --- a/drivers/target/target_core_xcopy.h +++ b/drivers/target/target_core_xcopy.h @@ -5,6 +5,12 @@ #define XCOPY_NAA_IEEE_REGEX_LEN 16 #define XCOPY_MAX_SECTORS 1024 +/* + * SPC4r37 6.4.6.1 + * Table 150 — CSCD descriptor ID values + */ +#define XCOPY_CSCD_DESC_ID_LIST_OFF_MAX 0x07FF + enum xcopy_origin_list { XCOL_SOURCE_RECV_OP = 0x01, XCOL_DEST_RECV_OP = 0x02, From 66640d35c1e4ef3c96ba5edb3c5e2ff8ab812e7a Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Mon, 2 Jan 2017 18:04:07 +0100 Subject: [PATCH 233/645] target: use XCOPY segment descriptor CSCD IDs The XCOPY specification in SPC4r37 states that the XCOPY source and destination device(s) should be derived from the copy source and copy destination (CSCD) descriptor IDs in the XCOPY segment descriptor. The CSCD IDs are generally (for block -> block copies), indexes into the corresponding CSCD descriptor list, e.g. ================================= EXTENDED COPY Header ================================= CSCD Descriptor List - entry 0 + LU ID <--------------<------------------\ - entry 1 | + LU ID <______________<_____________ | ================================= | | Segment Descriptor List | | - segment 0 | | + src CSCD ID = 0 --------->---------+----/ + dest CSCD ID = 1 ___________>______| + len + src lba + dest lba ================================= Currently LIO completely ignores the src and dest CSCD IDs in the Segment Descriptor List, and instead assumes that the first entry in the CSCD list corresponds to the source, and the second to the destination. This commit removes this assumption, by ensuring that the Segment Descriptor List is parsed prior to processing the CSCD Descriptor List. CSCD Descriptor List processing is modified to compare the current list index with the previously obtained src and dest CSCD IDs. Additionally, XCOPY requests where the src and dest CSCD IDs refer to the CSCD Descriptor List entry can now be successfully processed. Fixes: cbf031f ("target: Add support for EXTENDED_COPY copy offload") Link: https://bugzilla.kernel.org/show_bug.cgi?id=191381 Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 79 ++++++++++++++++++------------ 1 file changed, 48 insertions(+), 31 deletions(-) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 41a2a8ad1046..2595c1eb9e91 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -98,7 +98,7 @@ static int target_xcopy_locate_se_dev_e4(const unsigned char *dev_wwn, } static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop, - unsigned char *p, bool src) + unsigned char *p, unsigned short cscd_index) { unsigned char *desc = p; unsigned short ript; @@ -143,7 +143,13 @@ static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op return -EINVAL; } - if (src) { + if (cscd_index != xop->stdi && cscd_index != xop->dtdi) { + pr_debug("XCOPY 0xe4: ignoring CSCD entry %d - neither src nor " + "dest\n", cscd_index); + return 0; + } + + if (cscd_index == xop->stdi) { memcpy(&xop->src_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); /* * Determine if the source designator matches the local device @@ -155,10 +161,15 @@ static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op pr_debug("XCOPY 0xe4: Set xop->src_dev %p from source" " received xop\n", xop->src_dev); } - } else { + } + + if (cscd_index == xop->dtdi) { memcpy(&xop->dst_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN); /* - * Determine if the destination designator matches the local device + * Determine if the destination designator matches the local + * device. If @cscd_index corresponds to both source (stdi) and + * destination (dtdi), or dtdi comes after stdi, then + * XCOL_DEST_RECV_OP wins. */ if (!memcmp(&xop->local_dev_wwn[0], &xop->dst_tid_wwn[0], XCOPY_NAA_IEEE_REGEX_LEN)) { @@ -178,9 +189,9 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, { struct se_device *local_dev = se_cmd->se_dev; unsigned char *desc = p; - int offset = tdll % XCOPY_TARGET_DESC_LEN, rc, ret = 0; + int offset = tdll % XCOPY_TARGET_DESC_LEN, rc; + unsigned short cscd_index = 0; unsigned short start = 0; - bool src = true; *sense_ret = TCM_INVALID_PARAMETER_LIST; @@ -206,25 +217,19 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, while (start < tdll) { /* - * Check target descriptor identification with 0xE4 type with - * use VPD 0x83 WWPN matching .. + * Check target descriptor identification with 0xE4 type, and + * compare the current index with the CSCD descriptor IDs in + * the segment descriptor. Use VPD 0x83 WWPN matching .. */ switch (desc[0]) { case 0xe4: rc = target_xcopy_parse_tiddesc_e4(se_cmd, xop, - &desc[0], src); + &desc[0], cscd_index); if (rc != 0) goto out; - /* - * Assume target descriptors are in source -> destination order.. - */ - if (src) - src = false; - else - src = true; start += XCOPY_TARGET_DESC_LEN; desc += XCOPY_TARGET_DESC_LEN; - ret++; + cscd_index++; break; default: pr_err("XCOPY unsupported descriptor type code:" @@ -234,12 +239,21 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, } } - if (xop->op_origin == XCOL_SOURCE_RECV_OP) + switch (xop->op_origin) { + case XCOL_SOURCE_RECV_OP: rc = target_xcopy_locate_se_dev_e4(xop->dst_tid_wwn, &xop->dst_dev); - else + break; + case XCOL_DEST_RECV_OP: rc = target_xcopy_locate_se_dev_e4(xop->src_tid_wwn, &xop->src_dev); + break; + default: + pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - " + "stdi: %hu dtdi: %hu\n", xop->stdi, xop->dtdi); + rc = -EINVAL; + break; + } /* * If a matching IEEE NAA 0x83 descriptor for the requested device * is not located on this node, return COPY_ABORTED with ASQ/ASQC @@ -256,7 +270,7 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, pr_debug("XCOPY TGT desc: Dest dev: %p NAA IEEE WWN: 0x%16phN\n", xop->dst_dev, &xop->dst_tid_wwn[0]); - return ret; + return cscd_index; out: return -EINVAL; @@ -913,6 +927,20 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage, tdll, sdll, inline_dl); + /* + * skip over the target descriptors until segment descriptors + * have been passed - CSCD ids are needed to determine src and dest. + */ + seg_desc = &p[16] + tdll; + + rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc, + sdll, &ret); + if (rc <= 0) + goto out; + + pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc, + rc * XCOPY_SEGMENT_DESC_LEN); + rc = target_xcopy_parse_target_descriptors(se_cmd, xop, &p[16], tdll, &ret); if (rc <= 0) goto out; @@ -930,19 +958,8 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc, rc * XCOPY_TARGET_DESC_LEN); - seg_desc = &p[16]; - seg_desc += (rc * XCOPY_TARGET_DESC_LEN); - - rc = target_xcopy_parse_segment_descriptors(se_cmd, xop, seg_desc, - sdll, &ret); - if (rc <= 0) { - xcopy_pt_undepend_remotedev(xop); - goto out; - } transport_kunmap_data_sg(se_cmd); - pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc, - rc * XCOPY_SEGMENT_DESC_LEN); INIT_WORK(&xop->xop_work, target_xcopy_do_work); queue_work(xcopy_wq, &xop->xop_work); return TCM_NO_SENSE; From f94fd098f674b78c29f482da1999d8de0c93c74e Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Mon, 2 Jan 2017 18:04:08 +0100 Subject: [PATCH 234/645] target: check for XCOPY parameter truncation Check for XCOPY header, CSCD descriptor and segment descriptor list truncation, and respond accordingly. SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs): If the parameter list length causes truncation of the parameter list, then the copy manager shall transfer no data and shall terminate the EXTENDED COPY command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to PARAMETER LIST LENGTH ERROR. This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr test. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 14 ++++++++++++++ drivers/target/target_core_xcopy.h | 1 + 2 files changed, 15 insertions(+) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 2595c1eb9e91..a9a6462c66d1 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -888,6 +888,12 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) return TCM_UNSUPPORTED_SCSI_OPCODE; } + if (se_cmd->data_length < XCOPY_HDR_LEN) { + pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n", + se_cmd->data_length, XCOPY_HDR_LEN); + return TCM_PARAMETER_LIST_LENGTH_ERROR; + } + xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL); if (!xop) { pr_err("Unable to allocate xcopy_op\n"); @@ -923,6 +929,14 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) goto out; } + if (se_cmd->data_length < (XCOPY_HDR_LEN + tdll + sdll + inline_dl)) { + pr_err("XCOPY parameter truncation: data length %u too small " + "for tdll: %hu sdll: %u inline_dl: %u\n", + se_cmd->data_length, tdll, sdll, inline_dl); + ret = TCM_PARAMETER_LIST_LENGTH_ERROR; + goto out; + } + pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x" " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage, tdll, sdll, inline_dl); diff --git a/drivers/target/target_core_xcopy.h b/drivers/target/target_core_xcopy.h index e2d141140342..7c0b105cbe1b 100644 --- a/drivers/target/target_core_xcopy.h +++ b/drivers/target/target_core_xcopy.h @@ -1,5 +1,6 @@ #include +#define XCOPY_HDR_LEN 16 #define XCOPY_TARGET_DESC_LEN 32 #define XCOPY_SEGMENT_DESC_LEN 28 #define XCOPY_NAA_IEEE_REGEX_LEN 16 From 87156518da94a696f2b27ab8945d531af2f1d339 Mon Sep 17 00:00:00 2001 From: David Disseldorp Date: Mon, 2 Jan 2017 18:04:09 +0100 Subject: [PATCH 235/645] target: support XCOPY requests without parameters SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs): A parameter list length of zero specifies that the copy manager shall not transfer any data or alter any internal state, and this shall not be considered an error. This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr test. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/target/target_core_xcopy.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index a9a6462c66d1..d828b3b5000b 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -888,6 +888,10 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) return TCM_UNSUPPORTED_SCSI_OPCODE; } + if (se_cmd->data_length == 0) { + target_complete_cmd(se_cmd, SAM_STAT_GOOD); + return TCM_NO_SENSE; + } if (se_cmd->data_length < XCOPY_HDR_LEN) { pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n", se_cmd->data_length, XCOPY_HDR_LEN); From 8fb280616878b81c0790a0c33acbeec59c5711f4 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 10 Jan 2017 17:04:06 +0800 Subject: [PATCH 236/645] r8152: split rtl8152_suspend function Split rtl8152_suspend() into rtl8152_system_suspend() and rtl8152_rumtime_suspend(). Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 57 +++++++++++++++++++++++++++++------------ 1 file changed, 40 insertions(+), 17 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 7dc61228c55b..c5e6d88de4e4 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3576,39 +3576,62 @@ static bool delay_autosuspend(struct r8152 *tp) return false; } -static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) +static int rtl8152_rumtime_suspend(struct r8152 *tp) { - struct r8152 *tp = usb_get_intfdata(intf); struct net_device *netdev = tp->netdev; int ret = 0; - mutex_lock(&tp->control); - - if (PMSG_IS_AUTO(message)) { - if (netif_running(netdev) && delay_autosuspend(tp)) { + if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) { + if (delay_autosuspend(tp)) { ret = -EBUSY; goto out1; } - set_bit(SELECTIVE_SUSPEND, &tp->flags); - } else { - netif_device_detach(netdev); + clear_bit(WORK_ENABLE, &tp->flags); + usb_kill_urb(tp->intr_urb); + napi_disable(&tp->napi); + rtl_stop_rx(tp); + tp->rtl_ops.autosuspend_en(tp, true); + napi_enable(&tp->napi); } + set_bit(SELECTIVE_SUSPEND, &tp->flags); + +out1: + return ret; +} + +static int rtl8152_system_suspend(struct r8152 *tp) +{ + struct net_device *netdev = tp->netdev; + int ret = 0; + + netif_device_detach(netdev); + if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) { clear_bit(WORK_ENABLE, &tp->flags); usb_kill_urb(tp->intr_urb); napi_disable(&tp->napi); - if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) { - rtl_stop_rx(tp); - tp->rtl_ops.autosuspend_en(tp, true); - } else { - cancel_delayed_work_sync(&tp->schedule); - tp->rtl_ops.down(tp); - } + cancel_delayed_work_sync(&tp->schedule); + tp->rtl_ops.down(tp); napi_enable(&tp->napi); } -out1: + + return ret; +} + +static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct r8152 *tp = usb_get_intfdata(intf); + int ret; + + mutex_lock(&tp->control); + + if (PMSG_IS_AUTO(message)) + ret = rtl8152_rumtime_suspend(tp); + else + ret = rtl8152_system_suspend(tp); + mutex_unlock(&tp->control); return ret; From 75dc692eda114cb234a46cb11893a9c3ea520934 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 10 Jan 2017 17:04:07 +0800 Subject: [PATCH 237/645] r8152: fix rx issue for runtime suspend Pause the rx and make sure the rx fifo is empty when the autosuspend occurs. If the rx data comes when the driver is canceling the rx urb, the host controller would stop getting the data from the device and continue it after next rx urb is submitted. That is, one continuing data is split into two different urb buffers. That let the driver take the data as a rx descriptor, and unexpected behavior happens. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index c5e6d88de4e4..be418563cb18 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3582,17 +3582,42 @@ static int rtl8152_rumtime_suspend(struct r8152 *tp) int ret = 0; if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) { + u32 rcr = 0; + if (delay_autosuspend(tp)) { ret = -EBUSY; goto out1; } + if (netif_carrier_ok(netdev)) { + u32 ocp_data; + + rcr = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); + ocp_data = rcr & ~RCR_ACPT_ALL; + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); + rxdy_gated_en(tp, true); + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, + PLA_OOB_CTRL); + if (!(ocp_data & RXFIFO_EMPTY)) { + rxdy_gated_en(tp, false); + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr); + ret = -EBUSY; + goto out1; + } + } + clear_bit(WORK_ENABLE, &tp->flags); usb_kill_urb(tp->intr_urb); - napi_disable(&tp->napi); - rtl_stop_rx(tp); + tp->rtl_ops.autosuspend_en(tp, true); - napi_enable(&tp->napi); + + if (netif_carrier_ok(netdev)) { + napi_disable(&tp->napi); + rtl_stop_rx(tp); + rxdy_gated_en(tp, false); + ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr); + napi_enable(&tp->napi); + } } set_bit(SELECTIVE_SUSPEND, &tp->flags); From 7b6c1b4c0e1e44544aa18161dba6a741c080a7ef Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 10 Jan 2017 10:46:00 -0600 Subject: [PATCH 238/645] usb: musb: fix runtime PM in debugfs MUSB driver now has runtime PM support, but the debugfs driver misses the PM _get/_put() calls, which could cause MUSB register access failure. Cc: stable@vger.kernel.org # 4.9+ Acked-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_debugfs.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index 4fef50e5c8c1..dd70c88419d2 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -114,6 +114,7 @@ static int musb_regdump_show(struct seq_file *s, void *unused) unsigned i; seq_printf(s, "MUSB (M)HDRC Register Dump\n"); + pm_runtime_get_sync(musb->controller); for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) { switch (musb_regmap[i].size) { @@ -132,6 +133,8 @@ static int musb_regdump_show(struct seq_file *s, void *unused) } } + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return 0; } @@ -145,7 +148,10 @@ static int musb_test_mode_show(struct seq_file *s, void *unused) struct musb *musb = s->private; unsigned test; + pm_runtime_get_sync(musb->controller); test = musb_readb(musb->mregs, MUSB_TESTMODE); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); if (test & MUSB_TEST_FORCE_HOST) seq_printf(s, "force host\n"); @@ -194,11 +200,12 @@ static ssize_t musb_test_mode_write(struct file *file, u8 test; char buf[18]; + pm_runtime_get_sync(musb->controller); test = musb_readb(musb->mregs, MUSB_TESTMODE); if (test) { dev_err(musb->controller, "Error: test mode is already set. " "Please do USB Bus Reset to start a new test.\n"); - return count; + goto ret; } memset(buf, 0x00, sizeof(buf)); @@ -234,6 +241,9 @@ static ssize_t musb_test_mode_write(struct file *file, musb_writeb(musb->mregs, MUSB_TESTMODE, test); +ret: + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return count; } @@ -254,8 +264,13 @@ static int musb_softconnect_show(struct seq_file *s, void *unused) switch (musb->xceiv->otg->state) { case OTG_STATE_A_HOST: case OTG_STATE_A_WAIT_BCON: + pm_runtime_get_sync(musb->controller); + reg = musb_readb(musb->mregs, MUSB_DEVCTL); connect = reg & MUSB_DEVCTL_SESSION ? 1 : 0; + + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); break; default: connect = -1; @@ -284,6 +299,7 @@ static ssize_t musb_softconnect_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; + pm_runtime_get_sync(musb->controller); if (!strncmp(buf, "0", 1)) { switch (musb->xceiv->otg->state) { case OTG_STATE_A_HOST: @@ -314,6 +330,8 @@ static ssize_t musb_softconnect_write(struct file *file, } } + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return count; } From 205ac7b33e556bde7e3374042b4ca9989e245d89 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 24 Nov 2016 14:43:38 +0800 Subject: [PATCH 239/645] ARM: dts: sun6i: Disable display pipeline by default While we now support the internal display pipeline found on sun6i, it is possible that we are unable to enable the display for some boards, due to a lack of drivers for the panels or bridges found on them. If the display pipeline is enabled, the driver will try to enable, and possibly screw up the simple framebuffer U-boot had configured. Disable the display pipeline by default. Fixes: 6d0e5b70be13 ("ARM: dts: sun6i: Add device nodes for first display pipeline") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 2b26175d55d1..e78faaf9243c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -234,6 +234,7 @@ de: display-engine { compatible = "allwinner,sun6i-a31-display-engine"; allwinner,pipelines = <&fe0>; + status = "disabled"; }; soc@01c00000 { From 6b546c2a15f9d8d3b1fb22adeb4063d497b08265 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 24 Nov 2016 14:43:39 +0800 Subject: [PATCH 240/645] ARM: dts: sun6i: hummingbird: Enable display engine again Now that we disable the display engine by default, we need to re-enable it for the Hummingbird A31, which already had its display pipeline enabled. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 735914f6ae44..7cae328398b1 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -140,6 +140,10 @@ cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; From 661ccdc1a95f18ab6c1373322fde09afd5b90a1f Mon Sep 17 00:00:00 2001 From: Milo Kim Date: Tue, 13 Dec 2016 08:18:15 +0900 Subject: [PATCH 241/645] ARM: dts: sun8i: Support DTB build for NanoPi M1 The commit 10efbf5f1633 ("ARM: dts: sun8i: Add dts file for NanoPi M1 SBC") introduced NanoPi M1 board but it's missing in Allwinner H3 DTB build. Signed-off-by: Milo Kim Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cccdbcb557b6..359041fce6b1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -845,6 +845,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ From 7c9d8d0c41b3e24473ac7648a7fc2d644ccf08ff Mon Sep 17 00:00:00 2001 From: "Bryant G. Ly" Date: Mon, 9 Jan 2017 10:21:20 -0600 Subject: [PATCH 242/645] ibmvscsis: Fix srp_transfer_data fail return code If srp_transfer_data fails within ibmvscsis_write_pending, then the most likely scenario is that the client timed out the op and removed the TCE mapping. Thus it will loop forever retrying the op that is pretty much guaranteed to fail forever. A better return code would be EIO instead of EAGAIN. Cc: stable@vger.kernel.org Reported-by: Steven Royer Tested-by: Steven Royer Signed-off-by: Bryant G. Ly Signed-off-by: Bart Van Assche --- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c index 3d3768aaab4f..8fb5c54c7dd3 100644 --- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c @@ -3585,7 +3585,7 @@ static int ibmvscsis_write_pending(struct se_cmd *se_cmd) 1, 1); if (rc) { pr_err("srp_transfer_data() failed: %d\n", rc); - return -EAGAIN; + return -EIO; } /* * We now tell TCM to add this WRITE CDB directly into the TCM storage From 3116d37651d77125bf50f81f859b1278e02ccce6 Mon Sep 17 00:00:00 2001 From: Emmanuel Vadot Date: Wed, 14 Dec 2016 15:57:24 +0100 Subject: [PATCH 243/645] ARM: dts: sunxi: Change node name for pwrseq pin on Olinuxino-lime2-emmc The node name for the power seq pin is mmc2@0 like the mmc2_pins_a one. This makes the original node (mmc2_pins_a) scrapped out of the dtb and result in a unusable eMMC if U-Boot didn't configured the pins to the correct functions. Signed-off-by: Emmanuel Vadot Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 5ea4915f6d75..10d307408f23 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -56,7 +56,7 @@ }; &pio { - mmc2_pins_nrst: mmc2@0 { + mmc2_pins_nrst: mmc2-rst-pin { allwinner,pins = "PC16"; allwinner,function = "gpio_out"; allwinner,drive = ; From d9584d8ccc06ba98f4fad8ec720de66b6659fd35 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 9 Jan 2017 11:18:01 -0800 Subject: [PATCH 244/645] net: skb_flow_get_be16() can be static Removes following sparse complain : net/core/flow_dissector.c:70:8: warning: symbol 'skb_flow_get_be16' was not declared. Should it be static? Fixes: 972d3876faa8 ("flow dissector: ICMP support") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/flow_dissector.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index fe4e1531976c..1b7673aac59d 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -67,8 +67,8 @@ EXPORT_SYMBOL(skb_flow_dissector_init); * The function will try to retrieve a be32 entity at * offset poff */ -__be16 skb_flow_get_be16(const struct sk_buff *skb, int poff, void *data, - int hlen) +static __be16 skb_flow_get_be16(const struct sk_buff *skb, int poff, + void *data, int hlen) { __be16 *u, _u; From ecd43afdbe72017aefe48080631eb625e177ef4d Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Sun, 8 Jan 2017 19:45:48 -0800 Subject: [PATCH 245/645] ARCv2: save r30 on kernel entry as gcc uses it for code-gen This is not exposed to userspace debugers yet, which can be done independently as a seperate patch ! Signed-off-by: Vineet Gupta --- arch/arc/include/asm/entry-arcv2.h | 2 ++ arch/arc/include/asm/ptrace.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h index b5ff87e6f4b7..aee1a77934cf 100644 --- a/arch/arc/include/asm/entry-arcv2.h +++ b/arch/arc/include/asm/entry-arcv2.h @@ -16,6 +16,7 @@ ; ; Now manually save: r12, sp, fp, gp, r25 + PUSH r30 PUSH r12 ; Saving pt_regs->sp correctly requires some extra work due to the way @@ -72,6 +73,7 @@ POPAX AUX_USER_SP 1: POP r12 + POP r30 .endm diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h index 69095da1fcfd..47111d565a95 100644 --- a/arch/arc/include/asm/ptrace.h +++ b/arch/arc/include/asm/ptrace.h @@ -84,7 +84,7 @@ struct pt_regs { unsigned long fp; unsigned long sp; /* user/kernel sp depending on where we came from */ - unsigned long r12; + unsigned long r12, r30; /*------- Below list auto saved by h/w -----------*/ unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11; From dd545b52a3e1efd9f2c6352dbe95ccd0c53461cc Mon Sep 17 00:00:00 2001 From: Chandan Rajendra Date: Tue, 10 Jan 2017 13:29:54 -0700 Subject: [PATCH 246/645] do_direct_IO: Use inode->i_blkbits to compute block count to be cleaned The code currently uses sdio->blkbits to compute the number of blocks to be cleaned. However sdio->blkbits is derived from the logical block size of the underlying block device (Refer to the definition of do_blockdev_direct_IO()). Due to this, generic/299 test would rarely fail when executed on an ext4 filesystem with 64k as the block size and when using a virtio based disk (having 512 byte as the logical block size) inside a kvm guest. This commit fixes the bug by using inode->i_blkbits to compute the number of blocks to be cleaned. Signed-off-by: Chandan Rajendra Reviewed-by: Christoph Hellwig Fixed up by Jeff Moyer to only use/evaluate inode->i_blkbits once, to avoid issues with block size changes with IO in flight. Signed-off-by: Jens Axboe --- fs/direct-io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/direct-io.c b/fs/direct-io.c index aeae8c063451..c87bae4376b8 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -906,6 +906,7 @@ static int do_direct_IO(struct dio *dio, struct dio_submit *sdio, struct buffer_head *map_bh) { const unsigned blkbits = sdio->blkbits; + const unsigned i_blkbits = blkbits + sdio->blkfactor; int ret = 0; while (sdio->block_in_file < sdio->final_block_in_request) { @@ -949,7 +950,7 @@ static int do_direct_IO(struct dio *dio, struct dio_submit *sdio, clean_bdev_aliases( map_bh->b_bdev, map_bh->b_blocknr, - map_bh->b_size >> blkbits); + map_bh->b_size >> i_blkbits); } if (!sdio->blkfactor) From a14d749fcebe97ddf6af6db3d1f6ece85c9ddcb9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 9 Jan 2017 08:56:23 -0700 Subject: [PATCH 247/645] virtio_blk: avoid DMA to stack for the sense buffer Most users of BLOCK_PC requests allocate the sense buffer on the stack, so to avoid DMA to the stack copy them to a field in the heap allocated virtblk_req structure. Without that any attempt at SCSI passthrough I/O, including the SG_IO ioctl from userspace will crash the kernel. Note that this includes running tools like hdparm even when the host does not have SCSI passthrough enabled. Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 5545a679abd8..3c3b8f601469 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -56,6 +56,7 @@ struct virtblk_req { struct virtio_blk_outhdr out_hdr; struct virtio_scsi_inhdr in_hdr; u8 status; + u8 sense[SCSI_SENSE_BUFFERSIZE]; struct scatterlist sg[]; }; @@ -102,7 +103,8 @@ static int __virtblk_add_req(struct virtqueue *vq, } if (type == cpu_to_virtio32(vq->vdev, VIRTIO_BLK_T_SCSI_CMD)) { - sg_init_one(&sense, vbr->req->sense, SCSI_SENSE_BUFFERSIZE); + memcpy(vbr->sense, vbr->req->sense, SCSI_SENSE_BUFFERSIZE); + sg_init_one(&sense, vbr->sense, SCSI_SENSE_BUFFERSIZE); sgs[num_out + num_in++] = &sense; sg_init_one(&inhdr, &vbr->in_hdr, sizeof(vbr->in_hdr)); sgs[num_out + num_in++] = &inhdr; From 25b4acfc7de0fc4da3bfea3a316f7282c6fbde81 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Mon, 9 Jan 2017 15:20:31 -0500 Subject: [PATCH 248/645] nbd: blk_mq_init_queue returns an error code on failure, not NULL Additionally, don't assign directly to disk->queue, otherwise blk_put_queue (called via put_disk) will choke (panic) on the errno stored there. Bug found by code inspection after Omar found a similar issue in virtio_blk. Compile-tested only. Signed-off-by: Jeff Moyer Reviewed-by: Omar Sandoval Reviewed-by: Josef Bacik Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 38c576f76d36..50a2020b5b72 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1042,6 +1042,7 @@ static int __init nbd_init(void) return -ENOMEM; for (i = 0; i < nbds_max; i++) { + struct request_queue *q; struct gendisk *disk = alloc_disk(1 << part_shift); if (!disk) goto out; @@ -1067,12 +1068,13 @@ static int __init nbd_init(void) * every gendisk to have its very own request_queue struct. * These structs are big so we dynamically allocate them. */ - disk->queue = blk_mq_init_queue(&nbd_dev[i].tag_set); - if (!disk->queue) { + q = blk_mq_init_queue(&nbd_dev[i].tag_set); + if (IS_ERR(q)) { blk_mq_free_tag_set(&nbd_dev[i].tag_set); put_disk(disk); goto out; } + disk->queue = q; /* * Tell the block layer that we are not a rotational device From 6bf6b0aa3da84a3d9126919a94c49c0fb7ee2fb3 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Mon, 9 Jan 2017 11:44:12 -0800 Subject: [PATCH 249/645] virtio_blk: fix panic in initialization error path If blk_mq_init_queue() returns an error, it gets assigned to vblk->disk->queue. Then, when we call put_disk(), we end up calling blk_put_queue() with the ERR_PTR, causing a bad dereference. Fix it by only assigning to vblk->disk->queue on success. Signed-off-by: Omar Sandoval Reviewed-by: Jeff Moyer Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 3c3b8f601469..10332c24f961 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -630,11 +630,12 @@ static int virtblk_probe(struct virtio_device *vdev) if (err) goto out_put_disk; - q = vblk->disk->queue = blk_mq_init_queue(&vblk->tag_set); + q = blk_mq_init_queue(&vblk->tag_set); if (IS_ERR(q)) { err = -ENOMEM; goto out_free_tags; } + vblk->disk->queue = q; q->queuedata = vblk; From 270c8cf1cacc69cb8d99dea812f06067a45e4609 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 23 Nov 2016 13:02:32 +0100 Subject: [PATCH 250/645] ARM: 8632/1: ftrace: fix syscall name matching ARM has a few system calls (most notably mmap) for which the names of the functions which are referenced in the syscall table do not match the names of the syscall tracepoints. As a consequence of this, these tracepoints are not made available. Implement arch_syscall_match_sym_name to fix this and allow tracing even these system calls. Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/include/asm/ftrace.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index bfe2a2f5a644..22b73112b75f 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -54,6 +54,24 @@ static inline void *return_address(unsigned int level) #define ftrace_return_address(n) return_address(n) +#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME + +static inline bool arch_syscall_match_sym_name(const char *sym, + const char *name) +{ + if (!strcmp(sym, "sys_mmap2")) + sym = "sys_mmap_pgoff"; + else if (!strcmp(sym, "sys_statfs64_wrapper")) + sym = "sys_statfs64"; + else if (!strcmp(sym, "sys_fstatfs64_wrapper")) + sym = "sys_fstatfs64"; + else if (!strcmp(sym, "sys_arm_fadvise64_64")) + sym = "sys_fadvise64_64"; + + /* Ignore case since sym may start with "SyS" instead of "sys" */ + return !strcasecmp(sym, name); +} + #endif /* ifndef __ASSEMBLY__ */ #endif /* _ASM_ARM_FTRACE */ From ddc37832a1349f474c4532de381498020ed71d31 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 6 Jan 2017 13:12:47 +0100 Subject: [PATCH 251/645] ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an undefined instruction trap within write_wb_reg. This is because Scorpion CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if the core is not powered down. When DBGPRSR.SPD is set, breakpoint and watchpoint registers are treated as undefined. It's possible to trigger similar crashes later on from userspace, by requesting the kernel to install a breakpoint or watchpoint, as we can go idle at any point between the reset of the debug registers and their later use. This has always been the case. Given that this has always been broken, no-one has complained until now, and there is no clear workaround, disable hardware breakpoints and watchpoints on Scorpion to avoid these issues. Signed-off-by: Mark Rutland Reported-by: Linus Walleij Reviewed-by: Stephen Boyd Acked-by: Will Deacon Cc: Russell King Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/include/asm/cputype.h | 3 +++ arch/arm/kernel/hw_breakpoint.c | 16 ++++++++++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 522b5feb4eaa..b62eaeb147aa 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -94,6 +94,9 @@ #define ARM_CPU_XSCALE_ARCH_V2 0x4000 #define ARM_CPU_XSCALE_ARCH_V3 0x6000 +/* Qualcomm implemented cores */ +#define ARM_CPU_PART_SCORPION 0x510002d0 + extern unsigned int processor_id; #ifdef CONFIG_CPU_CP15 diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 188180b5523d..be3b3fbd382f 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1063,6 +1063,22 @@ static int __init arch_hw_breakpoint_init(void) return 0; } + /* + * Scorpion CPUs (at least those in APQ8060) seem to set DBGPRSR.SPD + * whenever a WFI is issued, even if the core is not powered down, in + * violation of the architecture. When DBGPRSR.SPD is set, accesses to + * breakpoint and watchpoint registers are treated as undefined, so + * this results in boot time and runtime failures when these are + * accessed and we unexpectedly take a trap. + * + * It's not clear if/how this can be worked around, so we blacklist + * Scorpion CPUs to avoid these issues. + */ + if (read_cpuid_part() == ARM_CPU_PART_SCORPION) { + pr_info("Scorpion CPU detected. Hardware breakpoints and watchpoints disabled\n"); + return 0; + } + has_ossr = core_has_os_save_restore(); /* Determine how many BRPs/WRPs are available. */ From faf3a932fbeb77860226a8323eacb835edc98648 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 9 Jan 2017 11:58:34 -0800 Subject: [PATCH 252/645] net: dsa: Ensure validity of dst->ds[0] It is perfectly possible to have non zero indexed switches being present in a DSA switch tree, in such a case, we will be deferencing a NULL pointer while dsa_cpu_port_ethtool_{setup,restore}. Be more defensive and ensure that dst->ds[0] is valid before doing anything with it. Fixes: 0c73c523cf73 ("net: dsa: Initialize CPU port ethtool ops per tree") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- net/dsa/dsa2.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index 5fff951a0a49..da3862124545 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -394,9 +394,11 @@ static int dsa_dst_apply(struct dsa_switch_tree *dst) return err; } - err = dsa_cpu_port_ethtool_setup(dst->ds[0]); - if (err) - return err; + if (dst->ds[0]) { + err = dsa_cpu_port_ethtool_setup(dst->ds[0]); + if (err) + return err; + } /* If we use a tagging format that doesn't have an ethertype * field, make sure that all packets from this point on get @@ -433,7 +435,8 @@ static void dsa_dst_unapply(struct dsa_switch_tree *dst) dsa_ds_unapply(dst, ds); } - dsa_cpu_port_ethtool_restore(dst->ds[0]); + if (dst->ds[0]) + dsa_cpu_port_ethtool_restore(dst->ds[0]); pr_info("DSA: tree %d unapplied\n", dst->tree); dst->applied = false; From 3512a1ad56174308a9fd3e10f4b1e3e152e9ec01 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 9 Jan 2017 14:31:58 -0800 Subject: [PATCH 253/645] net: qrtr: Mark 'buf' as little endian Failure to mark this pointer as __le32 causes checkers like sparse to complain: net/qrtr/qrtr.c:274:16: warning: incorrect type in assignment (different base types) net/qrtr/qrtr.c:274:16: expected unsigned int [unsigned] [usertype] net/qrtr/qrtr.c:274:16: got restricted __le32 [usertype] net/qrtr/qrtr.c:275:16: warning: incorrect type in assignment (different base types) net/qrtr/qrtr.c:275:16: expected unsigned int [unsigned] [usertype] net/qrtr/qrtr.c:275:16: got restricted __le32 [usertype] net/qrtr/qrtr.c:276:16: warning: incorrect type in assignment (different base types) net/qrtr/qrtr.c:276:16: expected unsigned int [unsigned] [usertype] net/qrtr/qrtr.c:276:16: got restricted __le32 [usertype] Silence it. Cc: Bjorn Andersson Signed-off-by: Stephen Boyd Acked-by: Bjorn Andersson Signed-off-by: David S. Miller --- net/qrtr/qrtr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index c985ecbe9bd6..ae5ac175b2be 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -252,7 +252,7 @@ static struct sk_buff *qrtr_alloc_resume_tx(u32 src_node, const int pkt_len = 20; struct qrtr_hdr *hdr; struct sk_buff *skb; - u32 *buf; + __le32 *buf; skb = alloc_skb(QRTR_HDR_SIZE + pkt_len, GFP_KERNEL); if (!skb) @@ -269,7 +269,7 @@ static struct sk_buff *qrtr_alloc_resume_tx(u32 src_node, hdr->dst_node_id = cpu_to_le32(dst_node); hdr->dst_port_id = cpu_to_le32(QRTR_PORT_CTRL); - buf = (u32 *)skb_put(skb, pkt_len); + buf = (__le32 *)skb_put(skb, pkt_len); memset(buf, 0, pkt_len); buf[0] = cpu_to_le32(QRTR_TYPE_RESUME_TX); buf[1] = cpu_to_le32(src_node); From 5d722b3024f6762addb8642ffddc9f275b5107ae Mon Sep 17 00:00:00 2001 From: "Anna, Suman" Date: Mon, 9 Jan 2017 21:48:56 -0600 Subject: [PATCH 254/645] net: add the AF_QIPCRTR entries to family name tables Commit bdabad3e363d ("net: Add Qualcomm IPC router") introduced a new address family. Update the family name tables accordingly so that the lockdep initialization can use the proper names for this family. Cc: Courtney Cavin Cc: Bjorn Andersson Signed-off-by: Suman Anna Signed-off-by: David S. Miller --- net/core/sock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index f560e0826009..4eca27dc5c94 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -222,7 +222,7 @@ static const char *const af_family_key_strings[AF_MAX+1] = { "sk_lock-AF_RXRPC" , "sk_lock-AF_ISDN" , "sk_lock-AF_PHONET" , "sk_lock-AF_IEEE802154", "sk_lock-AF_CAIF" , "sk_lock-AF_ALG" , "sk_lock-AF_NFC" , "sk_lock-AF_VSOCK" , "sk_lock-AF_KCM" , - "sk_lock-AF_MAX" + "sk_lock-AF_QIPCRTR", "sk_lock-AF_MAX" }; static const char *const af_family_slock_key_strings[AF_MAX+1] = { "slock-AF_UNSPEC", "slock-AF_UNIX" , "slock-AF_INET" , @@ -239,7 +239,7 @@ static const char *const af_family_slock_key_strings[AF_MAX+1] = { "slock-AF_RXRPC" , "slock-AF_ISDN" , "slock-AF_PHONET" , "slock-AF_IEEE802154", "slock-AF_CAIF" , "slock-AF_ALG" , "slock-AF_NFC" , "slock-AF_VSOCK" ,"slock-AF_KCM" , - "slock-AF_MAX" + "slock-AF_QIPCRTR", "slock-AF_MAX" }; static const char *const af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_UNSPEC", "clock-AF_UNIX" , "clock-AF_INET" , @@ -256,7 +256,7 @@ static const char *const af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" , "clock-AF_IEEE802154", "clock-AF_CAIF" , "clock-AF_ALG" , "clock-AF_NFC" , "clock-AF_VSOCK" , "clock-AF_KCM" , - "clock-AF_MAX" + "clock-AF_QIPCRTR", "clock-AF_MAX" }; /* From dc5367bcc556e97555fc94a32cd1aadbebdff47e Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Tue, 10 Jan 2017 17:10:34 +0100 Subject: [PATCH 255/645] net/af_iucv: don't use paged skbs for TX on HiperSockets With commit e53743994e21 ("af_iucv: use paged SKBs for big outbound messages"), we transmit paged skbs for both of AF_IUCV's transport modes (IUCV or HiperSockets). The qeth driver for Layer 3 HiperSockets currently doesn't support NETIF_F_SG, so these skbs would just be linearized again by the stack. Avoid that overhead by using paged skbs only for IUCV transport. cc stable, since this also circumvents a significant skb leak when sending large messages (where the skb then needs to be linearized). Signed-off-by: Julian Wiedmann Signed-off-by: Ursula Braun Cc: # v4.8+ Fixes: e53743994e21 ("af_iucv: use paged SKBs for big outbound messages") Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index cfb9e5f4e28f..13190b38f22e 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1044,7 +1044,8 @@ static int iucv_sock_sendmsg(struct socket *sock, struct msghdr *msg, { struct sock *sk = sock->sk; struct iucv_sock *iucv = iucv_sk(sk); - size_t headroom, linear; + size_t headroom = 0; + size_t linear; struct sk_buff *skb; struct iucv_message txmsg = {0}; struct cmsghdr *cmsg; @@ -1122,18 +1123,20 @@ static int iucv_sock_sendmsg(struct socket *sock, struct msghdr *msg, * this is fine for SOCK_SEQPACKET (unless we want to support * segmented records using the MSG_EOR flag), but * for SOCK_STREAM we might want to improve it in future */ - headroom = (iucv->transport == AF_IUCV_TRANS_HIPER) - ? sizeof(struct af_iucv_trans_hdr) + ETH_HLEN : 0; - if (headroom + len < PAGE_SIZE) { + if (iucv->transport == AF_IUCV_TRANS_HIPER) { + headroom = sizeof(struct af_iucv_trans_hdr) + ETH_HLEN; linear = len; } else { - /* In nonlinear "classic" iucv skb, - * reserve space for iucv_array - */ - if (iucv->transport != AF_IUCV_TRANS_HIPER) - headroom += sizeof(struct iucv_array) * - (MAX_SKB_FRAGS + 1); - linear = PAGE_SIZE - headroom; + if (len < PAGE_SIZE) { + linear = len; + } else { + /* In nonlinear "classic" iucv skb, + * reserve space for iucv_array + */ + headroom = sizeof(struct iucv_array) * + (MAX_SKB_FRAGS + 1); + linear = PAGE_SIZE - headroom; + } } skb = sock_alloc_send_pskb(sk, headroom + linear, len - linear, noblock, &err, 0); From 9f9b74ef896792399dc7b5121896b9c963db80fb Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 10 Jan 2017 09:41:49 -0800 Subject: [PATCH 256/645] mlx4: Return EOPNOTSUPP instead of ENOTSUPP In commit b45f0674b997 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs"), it changed EOPNOTSUPP to ENOTSUPP by mistake. This patch fixes it. Fixes: b45f0674b997 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs") Signed-off-by: Martin KaFai Lau Acked-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index edbe200ac2fa..4910d9af1933 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2277,7 +2277,7 @@ static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) if (priv->tx_ring_num[TX_XDP] && !mlx4_en_check_xdp_mtu(dev, new_mtu)) - return -ENOTSUPP; + return -EOPNOTSUPP; dev->mtu = new_mtu; From 1272ce87fa017ca4cf32920764d879656b7a005a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 10 Jan 2017 12:24:01 -0800 Subject: [PATCH 257/645] gro: Enter slow-path if there is no tailroom The GRO path has a fast-path where we avoid calling pskb_may_pull and pskb_expand by directly accessing frag0. However, this should only be done if we have enough tailroom in the skb as otherwise we'll have to expand it later anyway. This patch adds the check by capping frag0_len with the skb tailroom. Fixes: cb18978cbf45 ("gro: Open-code final pskb_may_pull") Reported-by: Slava Shwartsman Signed-off-by: Herbert Xu Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 8db5a0b4b520..88d2907ca2cd 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4441,7 +4441,8 @@ static void skb_gro_reset_offset(struct sk_buff *skb) pinfo->nr_frags && !PageHighMem(skb_frag_page(frag0))) { NAPI_GRO_CB(skb)->frag0 = skb_frag_address(frag0); - NAPI_GRO_CB(skb)->frag0_len = skb_frag_size(frag0); + NAPI_GRO_CB(skb)->frag0_len = min(skb_frag_size(frag0), + skb->end - skb->tail); } } From 57ea52a865144aedbcd619ee0081155e658b6f7d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 10 Jan 2017 12:24:15 -0800 Subject: [PATCH 258/645] gro: Disable frag0 optimization on IPv6 ext headers The GRO fast path caches the frag0 address. This address becomes invalid if frag0 is modified by pskb_may_pull or its variants. So whenever that happens we must disable the frag0 optimization. This is usually done through the combination of gro_header_hard and gro_header_slow, however, the IPv6 extension header path did the pulling directly and would continue to use the GRO fast path incorrectly. This patch fixes it by disabling the fast path when we enter the IPv6 extension header path. Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address") Reported-by: Slava Shwartsman Signed-off-by: Herbert Xu Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 9 +++++++-- net/ipv6/ip6_offload.c | 1 + 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 994f7423a74b..9bde9558b596 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2477,14 +2477,19 @@ static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen) return NAPI_GRO_CB(skb)->frag0_len < hlen; } +static inline void skb_gro_frag0_invalidate(struct sk_buff *skb) +{ + NAPI_GRO_CB(skb)->frag0 = NULL; + NAPI_GRO_CB(skb)->frag0_len = 0; +} + static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen, unsigned int offset) { if (!pskb_may_pull(skb, hlen)) return NULL; - NAPI_GRO_CB(skb)->frag0 = NULL; - NAPI_GRO_CB(skb)->frag0_len = 0; + skb_gro_frag0_invalidate(skb); return skb->data + offset; } diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index 89c59e656f44..fc7b4017ba24 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -191,6 +191,7 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head, ops = rcu_dereference(inet6_offloads[proto]); if (!ops || !ops->callbacks.gro_receive) { __pskb_pull(skb, skb_gro_offset(skb)); + skb_gro_frag0_invalidate(skb); proto = ipv6_gso_pull_exthdrs(skb, proto); skb_gro_pull(skb, -skb_transport_offset(skb)); skb_reset_transport_header(skb); From 5771f6ea8d5ccc0df4d02ae65833413150a1b829 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Tue, 10 Jan 2017 16:57:12 -0800 Subject: [PATCH 259/645] MAINTAINERS: remove duplicate bug filling description I have noticed that two different descriptions for B: entries in MAINTAINERS were merged: commit 686564434e88 ("MAINTAINERS: Add bug tracking system location entry type") and 2de2bd95f456 ("MAINTAINERS: add "B:" for URI where to file bugs"). This patch keeps the description from 2de2bd95f456. There has been a discussion [1] about whether this more detailed description is useful and what it exactly implies. I find it more useful and general, and the author of 686564434e88 agreed in the end that either is fine. [1] https://lkml.org/lkml/2016/12/8/71 Link: http://lkml.kernel.org/r/20161219085158.12114-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 35c9cbfe4f2d..0277df881da4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -81,7 +81,6 @@ Descriptions of section entries: Q: Patchwork web based patch tracking system site T: SCM tree type and location. Type is one of: git, hg, quilt, stgit, topgit - B: Bug tracking system location. S: Status, one of the following: Supported: Someone is actually paid to look after this. Maintained: Someone actually looks after it. From 965d004af54088d138f806d04d803fb60d441986 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 10 Jan 2017 16:57:15 -0800 Subject: [PATCH 260/645] dax: fix deadlock with DAX 4k holes Currently in DAX if we have three read faults on the same hole address we can end up with the following: Thread 0 Thread 1 Thread 2 -------- -------- -------- dax_iomap_fault grab_mapping_entry lock_slot dax_iomap_fault grab_mapping_entry get_unlocked_mapping_entry dax_iomap_fault grab_mapping_entry get_unlocked_mapping_entry dax_load_hole find_or_create_page ... page_cache_tree_insert dax_wake_mapping_entry_waiter __radix_tree_replace get_page lock_page ... put_locked_mapping_entry unlock_page put_page The crux of the problem is that once we insert a 4k zero page, all locking from then on is done in terms of that 4k zero page and any additional threads sleeping on the empty DAX entry will never be woken. Fix this by waking all sleepers when we replace the DAX radix tree entry with a 4k zero page. This will allow all sleeping threads to successfully transition from locking based on the DAX empty entry to locking on the 4k zero page. With the test case reported by Xiong this happens very regularly in my test setup, with some runs resulting in 9+ threads in this deadlocked state. With this fix I've been able to run that same test dozens of times in a loop without issue. Fixes: ac401cc78242 ("dax: New fault locking") Link: http://lkml.kernel.org/r/1483479365-13607-1-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler Reported-by: Xiong Zhou Reviewed-by: Jan Kara Cc: [4.7+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/filemap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/filemap.c b/mm/filemap.c index d0e4d1002059..b772a33ef640 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -138,7 +138,7 @@ static int page_cache_tree_insert(struct address_space *mapping, dax_radix_locked_entry(0, RADIX_DAX_EMPTY)); /* Wakeup waiters for exceptional entry lock */ dax_wake_mapping_entry_waiter(mapping, page->index, p, - false); + true); } } __radix_tree_replace(&mapping->page_tree, node, slot, page, From d670ffd87509b6b136d8ed6f757851a8ebe442b2 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 10 Jan 2017 16:57:18 -0800 Subject: [PATCH 261/645] mm/thp/pagecache/collapse: free the pte page table on collapse for thp page cache. With THP page cache, when trying to build a huge page from regular pte pages, we just clear the pmd entry. We will take another fault and at that point we will find the huge page in the radix tree, thereby using the huge page to complete the page fault The second fault path will allocate the needed pgtable_t page for archs like ppc64. So no need to deposit the same in collapse path. Depositing them in the collapse path resulting in a pgtable_t memory leak also giving errors like BUG: non-zero nr_ptes on freeing mm: 3 Fixes: 953c66c2b22a ("mm: THP page cache support for ppc64") Link: http://lkml.kernel.org/r/20161212163428.6780-2-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V Acked-by: Kirill A. Shutemov Cc: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/khugepaged.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) diff --git a/mm/khugepaged.c b/mm/khugepaged.c index e32389a97030..b0924a68cc36 100644 --- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -1242,7 +1242,6 @@ static void retract_page_tables(struct address_space *mapping, pgoff_t pgoff) struct vm_area_struct *vma; unsigned long addr; pmd_t *pmd, _pmd; - bool deposited = false; i_mmap_lock_write(mapping); vma_interval_tree_foreach(vma, &mapping->i_mmap, pgoff, pgoff) { @@ -1267,26 +1266,10 @@ static void retract_page_tables(struct address_space *mapping, pgoff_t pgoff) spinlock_t *ptl = pmd_lock(vma->vm_mm, pmd); /* assume page table is clear */ _pmd = pmdp_collapse_flush(vma, addr, pmd); - /* - * now deposit the pgtable for arch that need it - * otherwise free it. - */ - if (arch_needs_pgtable_deposit()) { - /* - * The deposit should be visibile only after - * collapse is seen by others. - */ - smp_wmb(); - pgtable_trans_huge_deposit(vma->vm_mm, pmd, - pmd_pgtable(_pmd)); - deposited = true; - } spin_unlock(ptl); up_write(&vma->vm_mm->mmap_sem); - if (!deposited) { - atomic_long_dec(&vma->vm_mm->nr_ptes); - pte_free(vma->vm_mm, pmd_pgtable(_pmd)); - } + atomic_long_dec(&vma->vm_mm->nr_ptes); + pte_free(vma->vm_mm, pmd_pgtable(_pmd)); } } i_mmap_unlock_write(mapping); From 097963959594c5eccaba42510f7033f703211bda Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 10 Jan 2017 16:57:21 -0800 Subject: [PATCH 262/645] mm: add follow_pte_pmd() Patch series "Write protect DAX PMDs in *sync path". Currently dax_mapping_entry_mkclean() fails to clean and write protect the pmd_t of a DAX PMD entry during an *sync operation. This can result in data loss, as detailed in patch 2. This series is based on Dan's "libnvdimm-pending" branch, which is the current home for Jan's "dax: Page invalidation fixes" series. You can find a working tree here: https://git.kernel.org/cgit/linux/kernel/git/zwisler/linux.git/log/?h=dax_pmd_clean This patch (of 2): Similar to follow_pte(), follow_pte_pmd() allows either a PTE leaf or a huge page PMD leaf to be found and returned. Link: http://lkml.kernel.org/r/1482272586-21177-2-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler Suggested-by: Dave Hansen Cc: Alexander Viro Cc: Christoph Hellwig Cc: Dan Williams Cc: Dave Chinner Cc: Jan Kara Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 ++ mm/memory.c | 37 ++++++++++++++++++++++++++++++------- 2 files changed, 32 insertions(+), 7 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index fe6b4036664a..02793ac64ac6 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1212,6 +1212,8 @@ void unmap_mapping_range(struct address_space *mapping, loff_t const holebegin, loff_t const holelen, int even_cows); int follow_pte(struct mm_struct *mm, unsigned long address, pte_t **ptepp, spinlock_t **ptlp); +int follow_pte_pmd(struct mm_struct *mm, unsigned long address, + pte_t **ptepp, pmd_t **pmdpp, spinlock_t **ptlp); int follow_pfn(struct vm_area_struct *vma, unsigned long address, unsigned long *pfn); int follow_phys(struct vm_area_struct *vma, unsigned long address, diff --git a/mm/memory.c b/mm/memory.c index 9f2c15cdb32c..b62f3bc63481 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3772,8 +3772,8 @@ int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address) } #endif /* __PAGETABLE_PMD_FOLDED */ -static int __follow_pte(struct mm_struct *mm, unsigned long address, - pte_t **ptepp, spinlock_t **ptlp) +static int __follow_pte_pmd(struct mm_struct *mm, unsigned long address, + pte_t **ptepp, pmd_t **pmdpp, spinlock_t **ptlp) { pgd_t *pgd; pud_t *pud; @@ -3790,11 +3790,20 @@ static int __follow_pte(struct mm_struct *mm, unsigned long address, pmd = pmd_offset(pud, address); VM_BUG_ON(pmd_trans_huge(*pmd)); - if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) - goto out; - /* We cannot handle huge page PFN maps. Luckily they don't exist. */ - if (pmd_huge(*pmd)) + if (pmd_huge(*pmd)) { + if (!pmdpp) + goto out; + + *ptlp = pmd_lock(mm, pmd); + if (pmd_huge(*pmd)) { + *pmdpp = pmd; + return 0; + } + spin_unlock(*ptlp); + } + + if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) goto out; ptep = pte_offset_map_lock(mm, pmd, address, ptlp); @@ -3817,10 +3826,24 @@ int follow_pte(struct mm_struct *mm, unsigned long address, pte_t **ptepp, /* (void) is needed to make gcc happy */ (void) __cond_lock(*ptlp, - !(res = __follow_pte(mm, address, ptepp, ptlp))); + !(res = __follow_pte_pmd(mm, address, ptepp, NULL, + ptlp))); return res; } +int follow_pte_pmd(struct mm_struct *mm, unsigned long address, + pte_t **ptepp, pmd_t **pmdpp, spinlock_t **ptlp) +{ + int res; + + /* (void) is needed to make gcc happy */ + (void) __cond_lock(*ptlp, + !(res = __follow_pte_pmd(mm, address, ptepp, pmdpp, + ptlp))); + return res; +} +EXPORT_SYMBOL(follow_pte_pmd); + /** * follow_pfn - look up PFN at a user virtual address * @vma: memory mapping From f729c8c9b24f0540a6e6b86e68f3888ba90ef7e7 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 10 Jan 2017 16:57:24 -0800 Subject: [PATCH 263/645] dax: wrprotect pmd_t in dax_mapping_entry_mkclean Currently dax_mapping_entry_mkclean() fails to clean and write protect the pmd_t of a DAX PMD entry during an *sync operation. This can result in data loss in the following sequence: 1) mmap write to DAX PMD, dirtying PMD radix tree entry and making the pmd_t dirty and writeable 2) fsync, flushing out PMD data and cleaning the radix tree entry. We currently fail to mark the pmd_t as clean and write protected. 3) more mmap writes to the PMD. These don't cause any page faults since the pmd_t is dirty and writeable. The radix tree entry remains clean. 4) fsync, which fails to flush the dirty PMD data because the radix tree entry was clean. 5) crash - dirty data that should have been fsync'd as part of 4) could still have been in the processor cache, and is lost. Fix this by marking the pmd_t clean and write protected in dax_mapping_entry_mkclean(), which is called as part of the fsync operation 2). This will cause the writes in step 3) above to generate page faults where we'll re-dirty the PMD radix tree entry, resulting in flushes in the fsync that happens in step 4). Fixes: 4b4bb46d00b3 ("dax: clear dirty entry tags on cache flush") Link: http://lkml.kernel.org/r/1482272586-21177-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler Reviewed-by: Jan Kara Cc: Alexander Viro Cc: Christoph Hellwig Cc: Dan Williams Cc: Dave Chinner Cc: Jan Kara Cc: Matthew Wilcox Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/dax.c | 51 ++++++++++++++++++++++++++++++++-------------- include/linux/mm.h | 2 -- mm/memory.c | 4 ++-- 3 files changed, 38 insertions(+), 19 deletions(-) diff --git a/fs/dax.c b/fs/dax.c index 5c74f60d0a50..ddcddfeaa03b 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -691,8 +691,8 @@ static void dax_mapping_entry_mkclean(struct address_space *mapping, pgoff_t index, unsigned long pfn) { struct vm_area_struct *vma; - pte_t *ptep; - pte_t pte; + pte_t pte, *ptep = NULL; + pmd_t *pmdp = NULL; spinlock_t *ptl; bool changed; @@ -707,21 +707,42 @@ static void dax_mapping_entry_mkclean(struct address_space *mapping, address = pgoff_address(index, vma); changed = false; - if (follow_pte(vma->vm_mm, address, &ptep, &ptl)) + if (follow_pte_pmd(vma->vm_mm, address, &ptep, &pmdp, &ptl)) continue; - if (pfn != pte_pfn(*ptep)) - goto unlock; - if (!pte_dirty(*ptep) && !pte_write(*ptep)) - goto unlock; - flush_cache_page(vma, address, pfn); - pte = ptep_clear_flush(vma, address, ptep); - pte = pte_wrprotect(pte); - pte = pte_mkclean(pte); - set_pte_at(vma->vm_mm, address, ptep, pte); - changed = true; -unlock: - pte_unmap_unlock(ptep, ptl); + if (pmdp) { +#ifdef CONFIG_FS_DAX_PMD + pmd_t pmd; + + if (pfn != pmd_pfn(*pmdp)) + goto unlock_pmd; + if (!pmd_dirty(*pmdp) && !pmd_write(*pmdp)) + goto unlock_pmd; + + flush_cache_page(vma, address, pfn); + pmd = pmdp_huge_clear_flush(vma, address, pmdp); + pmd = pmd_wrprotect(pmd); + pmd = pmd_mkclean(pmd); + set_pmd_at(vma->vm_mm, address, pmdp, pmd); + changed = true; +unlock_pmd: + spin_unlock(ptl); +#endif + } else { + if (pfn != pte_pfn(*ptep)) + goto unlock_pte; + if (!pte_dirty(*ptep) && !pte_write(*ptep)) + goto unlock_pte; + + flush_cache_page(vma, address, pfn); + pte = ptep_clear_flush(vma, address, ptep); + pte = pte_wrprotect(pte); + pte = pte_mkclean(pte); + set_pte_at(vma->vm_mm, address, ptep, pte); + changed = true; +unlock_pte: + pte_unmap_unlock(ptep, ptl); + } if (changed) mmu_notifier_invalidate_page(vma->vm_mm, address); diff --git a/include/linux/mm.h b/include/linux/mm.h index 02793ac64ac6..b84615b0f64c 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1210,8 +1210,6 @@ int copy_page_range(struct mm_struct *dst, struct mm_struct *src, struct vm_area_struct *vma); void unmap_mapping_range(struct address_space *mapping, loff_t const holebegin, loff_t const holelen, int even_cows); -int follow_pte(struct mm_struct *mm, unsigned long address, pte_t **ptepp, - spinlock_t **ptlp); int follow_pte_pmd(struct mm_struct *mm, unsigned long address, pte_t **ptepp, pmd_t **pmdpp, spinlock_t **ptlp); int follow_pfn(struct vm_area_struct *vma, unsigned long address, diff --git a/mm/memory.c b/mm/memory.c index b62f3bc63481..6bf2b471e30c 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3819,8 +3819,8 @@ out: return -EINVAL; } -int follow_pte(struct mm_struct *mm, unsigned long address, pte_t **ptepp, - spinlock_t **ptlp) +static inline int follow_pte(struct mm_struct *mm, unsigned long address, + pte_t **ptepp, spinlock_t **ptlp) { int res; From bb1107f7c6052c863692a41f78c000db792334bf Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 10 Jan 2017 16:57:27 -0800 Subject: [PATCH 264/645] mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER Andrey Konovalov has reported the following warning triggered by the syzkaller fuzzer. WARNING: CPU: 1 PID: 9935 at mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 9935 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __alloc_pages_slowpath mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 mm/page_alloc.c:3781 alloc_pages_current+0x1c7/0x6b0 mm/mempolicy.c:2072 alloc_pages include/linux/gfp.h:469 kmalloc_order+0x1f/0x70 mm/slab_common.c:1015 kmalloc_order_trace+0x1f/0x160 mm/slab_common.c:1026 kmalloc_large include/linux/slab.h:422 __kmalloc+0x210/0x2d0 mm/slub.c:3723 kmalloc include/linux/slab.h:495 ep_write_iter+0x167/0xb50 drivers/usb/gadget/legacy/inode.c:664 new_sync_write fs/read_write.c:499 __vfs_write+0x483/0x760 fs/read_write.c:512 vfs_write+0x170/0x4e0 fs/read_write.c:560 SYSC_write fs/read_write.c:607 SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 The issue is caused by a lack of size check for the request size in ep_write_iter which should be fixed. It, however, points to another problem, that SLUB defines KMALLOC_MAX_SIZE too large because the its KMALLOC_SHIFT_MAX is (MAX_ORDER + PAGE_SHIFT) which means that the resulting page allocator request might be MAX_ORDER which is too large (see __alloc_pages_slowpath). The same applies to the SLOB allocator which allows even larger sizes. Make sure that they are capped properly and never request more than MAX_ORDER order. Link: http://lkml.kernel.org/r/20161220130659.16461-2-mhocko@kernel.org Signed-off-by: Michal Hocko Reported-by: Andrey Konovalov Acked-by: Christoph Lameter Cc: Alexei Starovoitov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/slab.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/slab.h b/include/linux/slab.h index 084b12bad198..4c5363566815 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -226,7 +226,7 @@ static inline const char *__check_heap_object(const void *ptr, * (PAGE_SIZE*2). Larger requests are passed to the page allocator. */ #define KMALLOC_SHIFT_HIGH (PAGE_SHIFT + 1) -#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT) +#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT - 1) #ifndef KMALLOC_SHIFT_LOW #define KMALLOC_SHIFT_LOW 3 #endif @@ -239,7 +239,7 @@ static inline const char *__check_heap_object(const void *ptr, * be allocated from the same page. */ #define KMALLOC_SHIFT_HIGH PAGE_SHIFT -#define KMALLOC_SHIFT_MAX 30 +#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT - 1) #ifndef KMALLOC_SHIFT_LOW #define KMALLOC_SHIFT_LOW 3 #endif From 7984c27c2c5cd3298de8afdba3e1bd46f884e934 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 10 Jan 2017 16:57:30 -0800 Subject: [PATCH 265/645] bpf: do not use KMALLOC_SHIFT_MAX Commit 01b3f52157ff ("bpf: fix allocation warnings in bpf maps and integer overflow") has added checks for the maximum allocateable size. It (ab)used KMALLOC_SHIFT_MAX for that purpose. While this is not incorrect it is not very clean because we already have KMALLOC_MAX_SIZE for this very reason so let's change both checks to use KMALLOC_MAX_SIZE instead. The original motivation for using KMALLOC_SHIFT_MAX was to work around an incorrect KMALLOC_MAX_SIZE which could lead to allocation warnings but it is no longer needed since "slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER". Link: http://lkml.kernel.org/r/20161220130659.16461-3-mhocko@kernel.org Signed-off-by: Michal Hocko Acked-by: Christoph Lameter Cc: Alexei Starovoitov Cc: Andrey Konovalov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/bpf/arraymap.c | 2 +- kernel/bpf/hashtab.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/bpf/arraymap.c b/kernel/bpf/arraymap.c index a2ac051c342f..229a5d5df977 100644 --- a/kernel/bpf/arraymap.c +++ b/kernel/bpf/arraymap.c @@ -56,7 +56,7 @@ static struct bpf_map *array_map_alloc(union bpf_attr *attr) attr->value_size == 0 || attr->map_flags) return ERR_PTR(-EINVAL); - if (attr->value_size >= 1 << (KMALLOC_SHIFT_MAX - 1)) + if (attr->value_size > KMALLOC_MAX_SIZE) /* if value_size is bigger, the user space won't be able to * access the elements. */ diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c index 34debc1a9641..3f2bb58952d8 100644 --- a/kernel/bpf/hashtab.c +++ b/kernel/bpf/hashtab.c @@ -274,7 +274,7 @@ static struct bpf_map *htab_map_alloc(union bpf_attr *attr) */ goto free_htab; - if (htab->map.value_size >= (1 << (KMALLOC_SHIFT_MAX - 1)) - + if (htab->map.value_size >= KMALLOC_MAX_SIZE - MAX_BPF_STACK - sizeof(struct htab_elem)) /* if value_size is bigger, the user space won't be able to * access the elements via bpf syscall. This check also makes From e7ee2c089e94067d68475990bdeed211c8852917 Mon Sep 17 00:00:00 2001 From: Eric Ren Date: Tue, 10 Jan 2017 16:57:33 -0800 Subject: [PATCH 266/645] ocfs2: fix crash caused by stale lvb with fsdlm plugin The crash happens rather often when we reset some cluster nodes while nodes contend fiercely to do truncate and append. The crash backtrace is below: dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover_grant 1 locks on 971 resources dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover 9 generation 5 done: 4 ms ocfs2: Begin replay journal (node 318952601, slot 2) on device (253,18) ocfs2: End replay journal (node 318952601, slot 2) on device (253,18) ocfs2: Beginning quota recovery on device (253,18) for slot 2 ocfs2: Finishing quota recovery on device (253,18) for slot 2 (truncate,30154,1):ocfs2_truncate_file:470 ERROR: bug expression: le64_to_cpu(fe->i_size) != i_size_read(inode) (truncate,30154,1):ocfs2_truncate_file:470 ERROR: Inode 290321, inode i_size = 732 != di i_size = 937, i_flags = 0x1 ------------[ cut here ]------------ kernel BUG at /usr/src/linux/fs/ocfs2/file.c:470! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2_stack_user(OEN) ocfs2(OEN) ocfs2_nodemanager ocfs2_stackglue(OEN) quota_tree dlm(OEN) configfs fuse sd_mod iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs softdog xfs libcrc32c ppdev parport_pc pcspkr parport joydev virtio_balloon virtio_net i2c_piix4 acpi_cpufreq button processor ext4 crc16 jbd2 mbcache ata_generic cirrus virtio_blk ata_piix drm_kms_helper ahci syscopyarea libahci sysfillrect sysimgblt fb_sys_fops ttm floppy libata drm virtio_pci virtio_ring uhci_hcd virtio ehci_hcd usbcore serio_raw usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: No, Unsupported modules are loaded CPU: 1 PID: 30154 Comm: truncate Tainted: G OE N 4.4.21-69-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014 task: ffff88004ff6d240 ti: ffff880074e68000 task.ti: ffff880074e68000 RIP: 0010:[] [] ocfs2_truncate_file+0x640/0x6c0 [ocfs2] RSP: 0018:ffff880074e6bd50 EFLAGS: 00010282 RAX: 0000000000000074 RBX: 000000000000029e RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff880074e6bda8 R08: 000000003675dc7a R09: ffffffff82013414 R10: 0000000000034c50 R11: 0000000000000000 R12: ffff88003aab3448 R13: 00000000000002dc R14: 0000000000046e11 R15: 0000000000000020 FS: 00007f839f965700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f839f97e000 CR3: 0000000036723000 CR4: 00000000000006e0 Call Trace: ocfs2_setattr+0x698/0xa90 [ocfs2] notify_change+0x1ae/0x380 do_truncate+0x5e/0x90 do_sys_ftruncate.constprop.11+0x108/0x160 entry_SYSCALL_64_fastpath+0x12/0x6d Code: 24 28 ba d6 01 00 00 48 c7 c6 30 43 62 a0 8b 41 2c 89 44 24 08 48 8b 41 20 48 c7 c1 78 a3 62 a0 48 89 04 24 31 c0 e8 a0 97 f9 ff <0f> 0b 3d 00 fe ff ff 0f 84 ab fd ff ff 83 f8 fc 0f 84 a2 fd ff RIP [] ocfs2_truncate_file+0x640/0x6c0 [ocfs2] It's because ocfs2_inode_lock() get us stale LVB in which the i_size is not equal to the disk i_size. We mistakenly trust the LVB because the underlaying fsdlm dlm_lock() doesn't set lkb_sbflags with DLM_SBF_VALNOTVALID properly for us. But, why? The current code tries to downconvert lock without DLM_LKF_VALBLK flag to tell o2cb don't update RSB's LVB if it's a PR->NULL conversion, even if the lock resource type needs LVB. This is not the right way for fsdlm. The fsdlm plugin behaves different on DLM_LKF_VALBLK, it depends on DLM_LKF_VALBLK to decide if we care about the LVB in the LKB. If DLM_LKF_VALBLK is not set, fsdlm will skip recovering RSB's LVB from this lkb and set the right DLM_SBF_VALNOTVALID appropriately when node failure happens. The following diagram briefly illustrates how this crash happens: RSB1 is inode metadata lock resource with LOCK_TYPE_USES_LVB; The 1st round: Node1 Node2 RSB1: PR RSB1(master): NULL->EX ocfs2_downconvert_lock(PR->NULL, set_lvb==0) ocfs2_dlm_lock(no DLM_LKF_VALBLK) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - dlm_lock(no DLM_LKF_VALBLK) convert_lock(overwrite lkb->lkb_exflags with no DLM_LKF_VALBLK) RSB1: NULL RSB1: EX reset Node2 dlm_recover_rsbs() recover_lvb() /* The LVB is not trustable if the node with EX fails and * no lock >= PR is left. We should set RSB_VALNOTVALID for RSB1. */ if(!(kb_exflags & DLM_LKF_VALBLK)) /* This means we miss the chance to return; * to invalid the LVB here. */ The 2nd round: Node 1 Node2 RSB1(become master from recovery) ocfs2_setattr() ocfs2_inode_lock(NULL->EX) /* dlm_lock() return the stale lvb without setting DLM_SBF_VALNOTVALID */ ocfs2_meta_lvb_is_trustable() return 1 /* so we don't refresh inode from disk */ ocfs2_truncate_file() mlog_bug_on_msg(disk isize != i_size_read(inode)) /* crash! */ The fix is quite straightforward. We keep to set DLM_LKF_VALBLK flag for dlm_lock() if the lock resource type needs LVB and the fsdlm plugin is uesed. Link: http://lkml.kernel.org/r/1481275846-6604-1-git-send-email-zren@suse.com Signed-off-by: Eric Ren Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dlmglue.c | 10 ++++++++++ fs/ocfs2/stackglue.c | 6 ++++++ fs/ocfs2/stackglue.h | 3 +++ 3 files changed, 19 insertions(+) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 83d576f6a287..77d1632e905d 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -3303,6 +3303,16 @@ static int ocfs2_downconvert_lock(struct ocfs2_super *osb, mlog(ML_BASTS, "lockres %s, level %d => %d\n", lockres->l_name, lockres->l_level, new_level); + /* + * On DLM_LKF_VALBLK, fsdlm behaves differently with o2cb. It always + * expects DLM_LKF_VALBLK being set if the LKB has LVB, so that + * we can recover correctly from node failure. Otherwise, we may get + * invalid LVB in LKB, but without DLM_SBF_VALNOTVALID being set. + */ + if (!ocfs2_is_o2cb_active() && + lockres->l_ops->flags & LOCK_TYPE_USES_LVB) + lvb = 1; + if (lvb) dlm_flags |= DLM_LKF_VALBLK; diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index 52c07346bea3..820359096c7a 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -48,6 +48,12 @@ static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; */ static struct ocfs2_stack_plugin *active_stack; +inline int ocfs2_is_o2cb_active(void) +{ + return !strcmp(active_stack->sp_name, OCFS2_STACK_PLUGIN_O2CB); +} +EXPORT_SYMBOL_GPL(ocfs2_is_o2cb_active); + static struct ocfs2_stack_plugin *ocfs2_stack_lookup(const char *name) { struct ocfs2_stack_plugin *p; diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index f2dce10fae54..e3036e1790e8 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -298,6 +298,9 @@ void ocfs2_stack_glue_set_max_proto_version(struct ocfs2_protocol_version *max_p int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin); void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin); +/* In ocfs2_downconvert_lock(), we need to know which stack we are using */ +int ocfs2_is_o2cb_active(void); + extern struct kset *ocfs2_kset; #endif /* STACKGLUE_H */ From f931ab479dd24cf7a2c6e2df19778406892591fb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 Jan 2017 16:57:36 -0800 Subject: [PATCH 267/645] mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done} Both arch_add_memory() and arch_remove_memory() expect a single threaded context. For example, arch/x86/mm/init_64.c::kernel_physical_mapping_init() does not hold any locks over this check and branch: if (pgd_val(*pgd)) { pud = (pud_t *)pgd_page_vaddr(*pgd); paddr_last = phys_pud_init(pud, __pa(vaddr), __pa(vaddr_end), page_size_mask); continue; } pud = alloc_low_page(); paddr_last = phys_pud_init(pud, __pa(vaddr), __pa(vaddr_end), page_size_mask); The result is that two threads calling devm_memremap_pages() simultaneously can end up colliding on pgd initialization. This leads to crash signatures like the following where the loser of the race initializes the wrong pgd entry: BUG: unable to handle kernel paging request at ffff888ebfff0000 IP: memcpy_erms+0x6/0x10 PGD 2f8e8fc067 PUD 0 /* <---- Invalid PUD */ Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 54 PID: 3818 Comm: systemd-udevd Not tainted 4.6.7+ #13 task: ffff882fac290040 ti: ffff882f887a4000 task.ti: ffff882f887a4000 RIP: memcpy_erms+0x6/0x10 [..] Call Trace: ? pmem_do_bvec+0x205/0x370 [nd_pmem] ? blk_queue_enter+0x3a/0x280 pmem_rw_page+0x38/0x80 [nd_pmem] bdev_read_page+0x84/0xb0 Hold the standard memory hotplug mutex over calls to arch_{add,remove}_memory(). Fixes: 41e94a851304 ("add devm_memremap_pages") Link: http://lkml.kernel.org/r/148357647831.9498.12606007370121652979.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams Cc: Christoph Hellwig Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/memremap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/memremap.c b/kernel/memremap.c index b501e390bb34..9ecedc28b928 100644 --- a/kernel/memremap.c +++ b/kernel/memremap.c @@ -246,7 +246,9 @@ static void devm_memremap_pages_release(struct device *dev, void *data) /* pages are dead and unused, undo the arch mapping */ align_start = res->start & ~(SECTION_SIZE - 1); align_size = ALIGN(resource_size(res), SECTION_SIZE); + mem_hotplug_begin(); arch_remove_memory(align_start, align_size); + mem_hotplug_done(); untrack_pfn(NULL, PHYS_PFN(align_start), align_size); pgmap_radix_release(res); dev_WARN_ONCE(dev, pgmap->altmap && pgmap->altmap->alloc, @@ -358,7 +360,9 @@ void *devm_memremap_pages(struct device *dev, struct resource *res, if (error) goto err_pfn_remap; + mem_hotplug_begin(); error = arch_add_memory(nid, align_start, align_size, true); + mem_hotplug_done(); if (error) goto err_add_memory; From 2df26639e708a88dcc22171949da638a9998f3bc Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 10 Jan 2017 16:57:39 -0800 Subject: [PATCH 268/645] mm: fix remote numa hits statistics Jia He has noticed that commit b9f00e147f27 ("mm, page_alloc: reduce branches in zone_statistics") has an unintentional side effect that remote node allocation requests are accounted as NUMA_MISS rathat than NUMA_HIT and NUMA_OTHER if such a request doesn't use __GFP_OTHER_NODE. There are many of these potentially because the flag is used very rarely while we have many users of __alloc_pages_node. Fix this by simply ignoring __GFP_OTHER_NODE (it can be removed in a follow up patch) and treat all allocations that were satisfied from the preferred zone's node as NUMA_HITS because this is the same node we requested the allocation from in most cases. If this is not the local node then we just account it as NUMA_OTHER rather than NUMA_LOCAL. One downsize would be that an allocation request for a node which is outside of the mempolicy nodemask would be reported as a hit which is a bit weird but that was the case before b9f00e147f27 already. Fixes: b9f00e147f27 ("mm, page_alloc: reduce branches in zone_statistics") Link: http://lkml.kernel.org/r/20170102153057.9451-2-mhocko@kernel.org Signed-off-by: Michal Hocko Reported-by: Jia He Reviewed-by: Vlastimil Babka # with cbmc[1] superpowers Acked-by: Mel Gorman Cc: Johannes Weiner Cc: Joonsoo Kim Cc: Taku Izumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 2c6d5f64feca..cba2a64792e6 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2583,30 +2583,23 @@ int __isolate_free_page(struct page *page, unsigned int order) * Update NUMA hit/miss statistics * * Must be called with interrupts disabled. - * - * When __GFP_OTHER_NODE is set assume the node of the preferred - * zone is the local node. This is useful for daemons who allocate - * memory on behalf of other processes. */ static inline void zone_statistics(struct zone *preferred_zone, struct zone *z, gfp_t flags) { #ifdef CONFIG_NUMA - int local_nid = numa_node_id(); enum zone_stat_item local_stat = NUMA_LOCAL; - if (unlikely(flags & __GFP_OTHER_NODE)) { + if (z->node != numa_node_id()) local_stat = NUMA_OTHER; - local_nid = preferred_zone->node; - } - if (z->node == local_nid) { + if (z->node == preferred_zone->node) __inc_zone_state(z, NUMA_HIT); - __inc_zone_state(z, local_stat); - } else { + else { __inc_zone_state(z, NUMA_MISS); __inc_zone_state(preferred_zone, NUMA_FOREIGN); } + __inc_zone_state(z, local_stat); #endif } From 41b6167e8f746b475668f1da78599fc4284f18db Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 10 Jan 2017 16:57:42 -0800 Subject: [PATCH 269/645] mm: get rid of __GFP_OTHER_NODE The flag was introduced by commit 78afd5612deb ("mm: add __GFP_OTHER_NODE flag") to allow proper accounting of remote node allocations done by kernel daemons on behalf of a process - e.g. khugepaged. After "mm: fix remote numa hits statistics" we do not need and actually use the flag so we can safely remove it because all allocations which are satisfied from their "home" node are accounted properly. [mhocko@suse.com: fix build] Link: http://lkml.kernel.org/r/20170106122225.GK5556@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170102153057.9451-3-mhocko@kernel.org Signed-off-by: Michal Hocko Acked-by: Mel Gorman Acked-by: Vlastimil Babka Cc: Michal Hocko Cc: Johannes Weiner Cc: Joonsoo Kim Cc: Taku Izumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 13 +++---------- include/trace/events/mmflags.h | 3 +-- mm/huge_memory.c | 3 +-- mm/khugepaged.c | 5 ++--- mm/page_alloc.c | 5 ++--- tools/perf/builtin-kmem.c | 1 - 6 files changed, 9 insertions(+), 21 deletions(-) diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 4175dca4ac39..7806a8f80abc 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -38,9 +38,8 @@ struct vm_area_struct; #define ___GFP_ACCOUNT 0x100000u #define ___GFP_NOTRACK 0x200000u #define ___GFP_DIRECT_RECLAIM 0x400000u -#define ___GFP_OTHER_NODE 0x800000u -#define ___GFP_WRITE 0x1000000u -#define ___GFP_KSWAPD_RECLAIM 0x2000000u +#define ___GFP_WRITE 0x800000u +#define ___GFP_KSWAPD_RECLAIM 0x1000000u /* If the above are modified, __GFP_BITS_SHIFT may need updating */ /* @@ -172,11 +171,6 @@ struct vm_area_struct; * __GFP_NOTRACK_FALSE_POSITIVE is an alias of __GFP_NOTRACK. It's a means of * distinguishing in the source between false positives and allocations that * cannot be supported (e.g. page tables). - * - * __GFP_OTHER_NODE is for allocations that are on a remote node but that - * should not be accounted for as a remote allocation in vmstat. A - * typical user would be khugepaged collapsing a huge page on a remote - * node. */ #define __GFP_COLD ((__force gfp_t)___GFP_COLD) #define __GFP_NOWARN ((__force gfp_t)___GFP_NOWARN) @@ -184,10 +178,9 @@ struct vm_area_struct; #define __GFP_ZERO ((__force gfp_t)___GFP_ZERO) #define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK) #define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK) -#define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* Room for N __GFP_FOO bits */ -#define __GFP_BITS_SHIFT 26 +#define __GFP_BITS_SHIFT 25 #define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1)) /* diff --git a/include/trace/events/mmflags.h b/include/trace/events/mmflags.h index 9e687ca9a307..15bf875d0e4a 100644 --- a/include/trace/events/mmflags.h +++ b/include/trace/events/mmflags.h @@ -47,8 +47,7 @@ {(unsigned long)__GFP_WRITE, "__GFP_WRITE"}, \ {(unsigned long)__GFP_RECLAIM, "__GFP_RECLAIM"}, \ {(unsigned long)__GFP_DIRECT_RECLAIM, "__GFP_DIRECT_RECLAIM"},\ - {(unsigned long)__GFP_KSWAPD_RECLAIM, "__GFP_KSWAPD_RECLAIM"},\ - {(unsigned long)__GFP_OTHER_NODE, "__GFP_OTHER_NODE"} \ + {(unsigned long)__GFP_KSWAPD_RECLAIM, "__GFP_KSWAPD_RECLAIM"}\ #define show_gfp_flags(flags) \ (flags) ? __print_flags(flags, "|", \ diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 10eedbf14421..72339a646fb1 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -919,8 +919,7 @@ static int do_huge_pmd_wp_page_fallback(struct vm_fault *vmf, pmd_t orig_pmd, } for (i = 0; i < HPAGE_PMD_NR; i++) { - pages[i] = alloc_page_vma_node(GFP_HIGHUSER_MOVABLE | - __GFP_OTHER_NODE, vma, + pages[i] = alloc_page_vma_node(GFP_HIGHUSER_MOVABLE, vma, vmf->address, page_to_nid(page)); if (unlikely(!pages[i] || mem_cgroup_try_charge(pages[i], vma->vm_mm, diff --git a/mm/khugepaged.c b/mm/khugepaged.c index b0924a68cc36..77ae3239c3de 100644 --- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -943,7 +943,7 @@ static void collapse_huge_page(struct mm_struct *mm, VM_BUG_ON(address & ~HPAGE_PMD_MASK); /* Only allocate from the target node */ - gfp = alloc_hugepage_khugepaged_gfpmask() | __GFP_OTHER_NODE | __GFP_THISNODE; + gfp = alloc_hugepage_khugepaged_gfpmask() | __GFP_THISNODE; /* * Before allocating the hugepage, release the mmap_sem read lock. @@ -1309,8 +1309,7 @@ static void collapse_shmem(struct mm_struct *mm, VM_BUG_ON(start & (HPAGE_PMD_NR - 1)); /* Only allocate from the target node */ - gfp = alloc_hugepage_khugepaged_gfpmask() | - __GFP_OTHER_NODE | __GFP_THISNODE; + gfp = alloc_hugepage_khugepaged_gfpmask() | __GFP_THISNODE; new_page = khugepaged_alloc_page(hpage, gfp, node); if (!new_page) { diff --git a/mm/page_alloc.c b/mm/page_alloc.c index cba2a64792e6..872caae544ef 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2584,8 +2584,7 @@ int __isolate_free_page(struct page *page, unsigned int order) * * Must be called with interrupts disabled. */ -static inline void zone_statistics(struct zone *preferred_zone, struct zone *z, - gfp_t flags) +static inline void zone_statistics(struct zone *preferred_zone, struct zone *z) { #ifdef CONFIG_NUMA enum zone_stat_item local_stat = NUMA_LOCAL; @@ -2667,7 +2666,7 @@ struct page *buffered_rmqueue(struct zone *preferred_zone, } __count_zid_vm_events(PGALLOC, page_zonenum(page), 1 << order); - zone_statistics(preferred_zone, zone, gfp_flags); + zone_statistics(preferred_zone, zone); local_irq_restore(flags); VM_BUG_ON_PAGE(bad_range(zone, page), page); diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c index 35a02f8e5a4a..915869e00d86 100644 --- a/tools/perf/builtin-kmem.c +++ b/tools/perf/builtin-kmem.c @@ -655,7 +655,6 @@ static const struct { { "__GFP_RECLAIM", "R" }, { "__GFP_DIRECT_RECLAIM", "DR" }, { "__GFP_KSWAPD_RECLAIM", "KR" }, - { "__GFP_OTHER_NODE", "ON" }, }; static size_t max_gfp_len; From da0510c47519fe0999cffe316e1d370e29f952be Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 10 Jan 2017 16:57:45 -0800 Subject: [PATCH 270/645] lib/Kconfig.debug: fix frv build failure The build of frv allmodconfig was failing with the errors like: /tmp/cc0JSPc3.s: Assembler messages: /tmp/cc0JSPc3.s:1839: Error: symbol `.LSLT0' is already defined /tmp/cc0JSPc3.s:1842: Error: symbol `.LASLTP0' is already defined /tmp/cc0JSPc3.s:1969: Error: symbol `.LELTP0' is already defined /tmp/cc0JSPc3.s:1970: Error: symbol `.LELT0' is already defined Commit 866ced950bcd ("kbuild: Support split debug info v4") introduced splitting the debug info and keeping that in a separate file. Somehow, the frv-linux gcc did not like that and I am guessing that instead of splitting it started copying. The first report about this is at: https://lists.01.org/pipermail/kbuild-all/2015-July/010527.html. I will try and see if this can work with frv and if still fails I will open a bug report with gcc. But meanwhile this is the easiest option to solve build failure of frv. Fixes: 866ced950bcd ("kbuild: Support split debug info v4") Link: http://lkml.kernel.org/r/1482062348-5352-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee Reported-by: Fengguang Wu Cc: Andi Kleen Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index b06848a104e6..eb9e9a7870fa 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -164,7 +164,7 @@ config DEBUG_INFO_REDUCED config DEBUG_INFO_SPLIT bool "Produce split debuginfo in .dwo files" - depends on DEBUG_INFO + depends on DEBUG_INFO && !FRV help Generate debug info into separate .dwo files. This significantly reduces the build directory size for builds with DEBUG_INFO, From c626bc46edb0fec289adfc86b02e07d34127ef6c Mon Sep 17 00:00:00 2001 From: Manfred Spraul Date: Tue, 10 Jan 2017 16:57:48 -0800 Subject: [PATCH 271/645] ipc/sem.c: fix incorrect sem_lock pairing Based on the syzcaller test case from dvyukov: https://gist.githubusercontent.com/dvyukov/d0e5efefe4d7d6daed829f5c3ca26a40/raw/08d0a261fe3c987bed04fbf267e08ba04bd533ea/gistfile1.txt The slow (i.e.: failure to acquire) syscall exit from semtimedop() incorrectly assumed that the the same lock is acquired as it was at the initial syscall entry. This is wrong: - thread A: single semop semop(), sleeps - thread B: multi semop semop(), sleeps - thread A: woken up by signal/timeout With this sequence, the initial sem_lock() call locks the per-semaphore spinlock, and it is unlocked with sem_unlock(). The call at the syscall return locks the global spinlock. Because locknum is not updated, the following sem_unlock() call unlocks the per-semaphore spinlock, which is actually not locked. The fix is trivial: Use the return value from sem_lock. Fixes: 370b262c896e ("ipc/sem: avoid idr tree lookup for interrupted semop") Link: http://lkml.kernel.org/r/1482215645-22328-1-git-send-email-manfred@colorfullife.com Signed-off-by: Manfred Spraul Reported-by: Dmitry Vyukov Reported-by: Johanna Abrahamsson Tested-by: Johanna Abrahamsson Acked-by: Davidlohr Bueso Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/sem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ipc/sem.c b/ipc/sem.c index e08b94851922..3ec5742b5640 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -1977,7 +1977,7 @@ SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops, } rcu_read_lock(); - sem_lock(sma, sops, nsops); + locknum = sem_lock(sma, sops, nsops); if (!ipc_valid_object(&sma->sem_perm)) goto out_unlock_free; From 20f664aabeb88d582b623a625f83b0454fa34f07 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 10 Jan 2017 16:57:51 -0800 Subject: [PATCH 272/645] mm: pmd dirty emulation in page fault handler Andreas reported [1] made a test in jemalloc hang in THP mode in arm64: http://lkml.kernel.org/r/mvmmvfy37g1.fsf@hawking.suse.de The problem is currently page fault handler doesn't supports dirty bit emulation of pmd for non-HW dirty-bit architecture so that application stucks until VM marked the pmd dirty. How the emulation work depends on the architecture. In case of arm64, when it set up pte firstly, it sets pte PTE_RDONLY to get a chance to mark the pte dirty via triggering page fault when store access happens. Once the page fault occurs, VM marks the pmd dirty and arch code for setting pmd will clear PTE_RDONLY for application to proceed. IOW, if VM doesn't mark the pmd dirty, application hangs forever by repeated fault(i.e., store op but the pmd is PTE_RDONLY). This patch enables pmd dirty-bit emulation for those architectures. [1] b8d3c4c3009d, mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called Fixes: b8d3c4c3009d ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called") Link: http://lkml.kernel.org/r/1482506098-6149-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim Reported-by: Andreas Schwab Tested-by: Andreas Schwab Acked-by: Kirill A. Shutemov Acked-by: Michal Hocko Cc: Jason Evans Cc: Will Deacon Cc: Catalin Marinas Cc: [4.5+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 72339a646fb1..9a6bd6c8d55a 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -883,15 +883,17 @@ void huge_pmd_set_accessed(struct vm_fault *vmf, pmd_t orig_pmd) { pmd_t entry; unsigned long haddr; + bool write = vmf->flags & FAULT_FLAG_WRITE; vmf->ptl = pmd_lock(vmf->vma->vm_mm, vmf->pmd); if (unlikely(!pmd_same(*vmf->pmd, orig_pmd))) goto unlock; entry = pmd_mkyoung(orig_pmd); + if (write) + entry = pmd_mkdirty(entry); haddr = vmf->address & HPAGE_PMD_MASK; - if (pmdp_set_access_flags(vmf->vma, haddr, vmf->pmd, entry, - vmf->flags & FAULT_FLAG_WRITE)) + if (pmdp_set_access_flags(vmf->vma, haddr, vmf->pmd, entry, write)) update_mmu_cache_pmd(vmf->vma, vmf->address, vmf->pmd); unlock: From 2d39b3cd34e6d323720d4c61bd714f5ae202c022 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Tue, 10 Jan 2017 16:57:54 -0800 Subject: [PATCH 273/645] signal: protect SIGNAL_UNKILLABLE from unintentional clearing. Since commit 00cd5c37afd5 ("ptrace: permit ptracing of /sbin/init") we can now trace init processes. init is initially protected with SIGNAL_UNKILLABLE which will prevent fatal signals such as SIGSTOP, but there are a number of paths during tracing where SIGNAL_UNKILLABLE can be implicitly cleared. This can result in init becoming stoppable/killable after tracing. For example, running: while true; do kill -STOP 1; done & strace -p 1 and then stopping strace and the kill loop will result in init being left in state TASK_STOPPED. Sending SIGCONT to init will resume it, but init will now respond to future SIGSTOP signals rather than ignoring them. Make sure that when setting SIGNAL_STOP_CONTINUED/SIGNAL_STOP_STOPPED that we don't clear SIGNAL_UNKILLABLE. Link: http://lkml.kernel.org/r/20170104122017.25047-1-jamie.iles@oracle.com Signed-off-by: Jamie Iles Acked-by: Oleg Nesterov Cc: Alexander Viro Cc: Ingo Molnar Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 10 ++++++++++ kernel/signal.c | 4 ++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 4d1905245c7a..ad3ec9ec61f7 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -854,6 +854,16 @@ struct signal_struct { #define SIGNAL_UNKILLABLE 0x00000040 /* for init: ignore fatal signals */ +#define SIGNAL_STOP_MASK (SIGNAL_CLD_MASK | SIGNAL_STOP_STOPPED | \ + SIGNAL_STOP_CONTINUED) + +static inline void signal_set_stop_flags(struct signal_struct *sig, + unsigned int flags) +{ + WARN_ON(sig->flags & (SIGNAL_GROUP_EXIT|SIGNAL_GROUP_COREDUMP)); + sig->flags = (sig->flags & ~SIGNAL_STOP_MASK) | flags; +} + /* If true, all threads except ->group_exit_task have pending SIGKILL */ static inline int signal_group_exit(const struct signal_struct *sig) { diff --git a/kernel/signal.c b/kernel/signal.c index ff046b73ff2d..3603d93a1968 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -346,7 +346,7 @@ static bool task_participate_group_stop(struct task_struct *task) * fresh group stop. Read comment in do_signal_stop() for details. */ if (!sig->group_stop_count && !(sig->flags & SIGNAL_STOP_STOPPED)) { - sig->flags = SIGNAL_STOP_STOPPED; + signal_set_stop_flags(sig, SIGNAL_STOP_STOPPED); return true; } return false; @@ -843,7 +843,7 @@ static bool prepare_signal(int sig, struct task_struct *p, bool force) * will take ->siglock, notice SIGNAL_CLD_MASK, and * notify its parent. See get_signal_to_deliver(). */ - signal->flags = why | SIGNAL_STOP_CONTINUED; + signal_set_stop_flags(signal, why | SIGNAL_STOP_CONTINUED); signal->group_stop_count = 0; signal->group_exit_code = 0; } From 9ebf73b275f06b114586af27cda3fd72e149d5ba Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 10 Jan 2017 16:57:57 -0800 Subject: [PATCH 274/645] mailmap: add codeaurora.org names for nameless email commits Some codeaurora.org emails have crept in but the names don't exist for them. Add the names for the emails so git can match everyone up. Link: http://lkml.kernel.org/r/20170104194611.25933-1-sboyd@codeaurora.org Signed-off-by: Stephen Boyd Cc: Sarangdhar Joshi Cc: Subash Abhinov Kasiviswanathan Cc: Subhash Jadavani Cc: Thomas Pedersen Cc: Andy Gross Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .mailmap | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/.mailmap b/.mailmap index 02d261407683..67dc22ffc9a8 100644 --- a/.mailmap +++ b/.mailmap @@ -137,6 +137,7 @@ Ricardo Ribalda Delgado Rudolf Marek Rui Saraiva Sachin P Sant +Sarangdhar Joshi Sam Ravnborg Santosh Shilimkar Santosh Shilimkar @@ -150,10 +151,13 @@ Shuah Khan Simon Kelley Stéphane Witzmann Stephen Hemminger +Subash Abhinov Kasiviswanathan +Subhash Jadavani Sudeep Holla Sudeep KarkadaNagesha Sumit Semwal Tejun Heo Thomas Graf +Thomas Pedersen Tony Luck Tsuneo Yoshioka Uwe Kleine-König From f073bdc51771f5a5c7a8d1191bfc3ae371d44de7 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 10 Jan 2017 16:58:00 -0800 Subject: [PATCH 275/645] mm: don't dereference struct page fields of invalid pages The VM_BUG_ON() check in move_freepages() checks whether the node id of a page matches the node id of its zone. However, it does this before having checked whether the struct page pointer refers to a valid struct page to begin with. This is guaranteed in most cases, but may not be the case if CONFIG_HOLES_IN_ZONE=y. So reorder the VM_BUG_ON() with the pfn_valid_within() check. Link: http://lkml.kernel.org/r/1481706707-6211-2-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ard Biesheuvel Acked-by: Will Deacon Cc: Catalin Marinas Cc: Hanjun Guo Cc: Yisheng Xie Cc: Robert Richter Cc: James Morse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 872caae544ef..74afdb4177cb 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1864,14 +1864,14 @@ int move_freepages(struct zone *zone, #endif for (page = start_page; page <= end_page;) { - /* Make sure we are not inadvertently changing nodes */ - VM_BUG_ON_PAGE(page_to_nid(page) != zone_to_nid(zone), page); - if (!pfn_valid_within(page_to_pfn(page))) { page++; continue; } + /* Make sure we are not inadvertently changing nodes */ + VM_BUG_ON_PAGE(page_to_nid(page) != zone_to_nid(zone), page); + if (!PageBuddy(page)) { page++; continue; From b4536f0c829c8586544c94735c343f9b5070bd01 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 10 Jan 2017 16:58:04 -0800 Subject: [PATCH 276/645] mm, memcg: fix the active list aging for lowmem requests when memcg is enabled Nils Holland and Klaus Ethgen have reported unexpected OOM killer invocations with 32b kernel starting with 4.8 kernels kworker/u4:5 invoked oom-killer: gfp_mask=0x2400840(GFP_NOFS|__GFP_NOFAIL), nodemask=0, order=0, oom_score_adj=0 kworker/u4:5 cpuset=/ mems_allowed=0 CPU: 1 PID: 2603 Comm: kworker/u4:5 Not tainted 4.9.0-gentoo #2 [...] Mem-Info: active_anon:58685 inactive_anon:90 isolated_anon:0 active_file:274324 inactive_file:281962 isolated_file:0 unevictable:0 dirty:649 writeback:0 unstable:0 slab_reclaimable:40662 slab_unreclaimable:17754 mapped:7382 shmem:202 pagetables:351 bounce:0 free:206736 free_pcp:332 free_cma:0 Node 0 active_anon:234740kB inactive_anon:360kB active_file:1097296kB inactive_file:1127848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:29528kB dirty:2596kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 184320kB anon_thp: 808kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no DMA free:3952kB min:788kB low:984kB high:1180kB active_anon:0kB inactive_anon:0kB active_file:7316kB inactive_file:0kB unevictable:0kB writepending:96kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:3200kB slab_unreclaimable:1408kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 813 3474 3474 Normal free:41332kB min:41368kB low:51708kB high:62048kB active_anon:0kB inactive_anon:0kB active_file:532748kB inactive_file:44kB unevictable:0kB writepending:24kB present:897016kB managed:836248kB mlocked:0kB slab_reclaimable:159448kB slab_unreclaimable:69608kB kernel_stack:1112kB pagetables:1404kB bounce:0kB free_pcp:528kB local_pcp:340kB free_cma:0kB lowmem_reserve[]: 0 0 21292 21292 HighMem free:781660kB min:512kB low:34356kB high:68200kB active_anon:234740kB inactive_anon:360kB active_file:557232kB inactive_file:1127804kB unevictable:0kB writepending:2592kB present:2725384kB managed:2725384kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:800kB local_pcp:608kB free_cma:0kB the oom killer is clearly pre-mature because there there is still a lot of page cache in the zone Normal which should satisfy this lowmem request. Further debugging has shown that the reclaim cannot make any forward progress because the page cache is hidden in the active list which doesn't get rotated because inactive_list_is_low is not memcg aware. The code simply subtracts per-zone highmem counters from the respective memcg's lru sizes which doesn't make any sense. We can simply end up always seeing the resulting active and inactive counts 0 and return false. This issue is not limited to 32b kernels but in practice the effect on systems without CONFIG_HIGHMEM would be much harder to notice because we do not invoke the OOM killer for allocations requests targeting < ZONE_NORMAL. Fix the issue by tracking per zone lru page counts in mem_cgroup_per_node and subtract per-memcg highmem counts when memcg is enabled. Introduce helper lruvec_zone_lru_size which redirects to either zone counters or mem_cgroup_get_zone_lru_size when appropriate. We are losing empty LRU but non-zero lru size detection introduced by ca707239e8a7 ("mm: update_lru_size warn and reset bad lru_size") because of the inherent zone vs. node discrepancy. Fixes: f8d1a31163fc ("mm: consider whether to decivate based on eligible zones inactive ratio") Link: http://lkml.kernel.org/r/20170104100825.3729-1-mhocko@kernel.org Signed-off-by: Michal Hocko Reported-by: Nils Holland Tested-by: Nils Holland Reported-by: Klaus Ethgen Acked-by: Minchan Kim Acked-by: Mel Gorman Acked-by: Johannes Weiner Reviewed-by: Vladimir Davydov Cc: [4.8+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 26 +++++++++++++++++++++++--- include/linux/mm_inline.h | 2 +- mm/memcontrol.c | 18 ++++++++---------- mm/vmscan.c | 27 +++++++++++++++++---------- 4 files changed, 49 insertions(+), 24 deletions(-) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 61d20c17f3b7..254698856b8f 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -120,7 +120,7 @@ struct mem_cgroup_reclaim_iter { */ struct mem_cgroup_per_node { struct lruvec lruvec; - unsigned long lru_size[NR_LRU_LISTS]; + unsigned long lru_zone_size[MAX_NR_ZONES][NR_LRU_LISTS]; struct mem_cgroup_reclaim_iter iter[DEF_PRIORITY + 1]; @@ -432,7 +432,7 @@ static inline bool mem_cgroup_online(struct mem_cgroup *memcg) int mem_cgroup_select_victim_node(struct mem_cgroup *memcg); void mem_cgroup_update_lru_size(struct lruvec *lruvec, enum lru_list lru, - int nr_pages); + int zid, int nr_pages); unsigned long mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg, int nid, unsigned int lru_mask); @@ -441,9 +441,23 @@ static inline unsigned long mem_cgroup_get_lru_size(struct lruvec *lruvec, enum lru_list lru) { struct mem_cgroup_per_node *mz; + unsigned long nr_pages = 0; + int zid; mz = container_of(lruvec, struct mem_cgroup_per_node, lruvec); - return mz->lru_size[lru]; + for (zid = 0; zid < MAX_NR_ZONES; zid++) + nr_pages += mz->lru_zone_size[zid][lru]; + return nr_pages; +} + +static inline +unsigned long mem_cgroup_get_zone_lru_size(struct lruvec *lruvec, + enum lru_list lru, int zone_idx) +{ + struct mem_cgroup_per_node *mz; + + mz = container_of(lruvec, struct mem_cgroup_per_node, lruvec); + return mz->lru_zone_size[zone_idx][lru]; } void mem_cgroup_handle_over_high(void); @@ -671,6 +685,12 @@ mem_cgroup_get_lru_size(struct lruvec *lruvec, enum lru_list lru) { return 0; } +static inline +unsigned long mem_cgroup_get_zone_lru_size(struct lruvec *lruvec, + enum lru_list lru, int zone_idx) +{ + return 0; +} static inline unsigned long mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg, diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h index 71613e8a720f..41d376e7116d 100644 --- a/include/linux/mm_inline.h +++ b/include/linux/mm_inline.h @@ -39,7 +39,7 @@ static __always_inline void update_lru_size(struct lruvec *lruvec, { __update_lru_size(lruvec, lru, zid, nr_pages); #ifdef CONFIG_MEMCG - mem_cgroup_update_lru_size(lruvec, lru, nr_pages); + mem_cgroup_update_lru_size(lruvec, lru, zid, nr_pages); #endif } diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 4048897e7b01..a63a8f832664 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -625,8 +625,8 @@ static void mem_cgroup_charge_statistics(struct mem_cgroup *memcg, unsigned long mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg, int nid, unsigned int lru_mask) { + struct lruvec *lruvec = mem_cgroup_lruvec(NODE_DATA(nid), memcg); unsigned long nr = 0; - struct mem_cgroup_per_node *mz; enum lru_list lru; VM_BUG_ON((unsigned)nid >= nr_node_ids); @@ -634,8 +634,7 @@ unsigned long mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg, for_each_lru(lru) { if (!(BIT(lru) & lru_mask)) continue; - mz = mem_cgroup_nodeinfo(memcg, nid); - nr += mz->lru_size[lru]; + nr += mem_cgroup_get_lru_size(lruvec, lru); } return nr; } @@ -1002,6 +1001,7 @@ out: * mem_cgroup_update_lru_size - account for adding or removing an lru page * @lruvec: mem_cgroup per zone lru vector * @lru: index of lru list the page is sitting on + * @zid: zone id of the accounted pages * @nr_pages: positive when adding or negative when removing * * This function must be called under lru_lock, just before a page is added @@ -1009,27 +1009,25 @@ out: * so as to allow it to check that lru_size 0 is consistent with list_empty). */ void mem_cgroup_update_lru_size(struct lruvec *lruvec, enum lru_list lru, - int nr_pages) + int zid, int nr_pages) { struct mem_cgroup_per_node *mz; unsigned long *lru_size; long size; - bool empty; if (mem_cgroup_disabled()) return; mz = container_of(lruvec, struct mem_cgroup_per_node, lruvec); - lru_size = mz->lru_size + lru; - empty = list_empty(lruvec->lists + lru); + lru_size = &mz->lru_zone_size[zid][lru]; if (nr_pages < 0) *lru_size += nr_pages; size = *lru_size; - if (WARN_ONCE(size < 0 || empty != !size, - "%s(%p, %d, %d): lru_size %ld but %sempty\n", - __func__, lruvec, lru, nr_pages, size, empty ? "" : "not ")) { + if (WARN_ONCE(size < 0, + "%s(%p, %d, %d): lru_size %ld\n", + __func__, lruvec, lru, nr_pages, size)) { VM_BUG_ON(1); *lru_size = 0; } diff --git a/mm/vmscan.c b/mm/vmscan.c index 6aa5b01d3e75..532a2a750952 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -242,6 +242,16 @@ unsigned long lruvec_lru_size(struct lruvec *lruvec, enum lru_list lru) return node_page_state(lruvec_pgdat(lruvec), NR_LRU_BASE + lru); } +unsigned long lruvec_zone_lru_size(struct lruvec *lruvec, enum lru_list lru, + int zone_idx) +{ + if (!mem_cgroup_disabled()) + return mem_cgroup_get_zone_lru_size(lruvec, lru, zone_idx); + + return zone_page_state(&lruvec_pgdat(lruvec)->node_zones[zone_idx], + NR_ZONE_LRU_BASE + lru); +} + /* * Add a shrinker callback to be called from the vm. */ @@ -1382,8 +1392,7 @@ int __isolate_lru_page(struct page *page, isolate_mode_t mode) * be complete before mem_cgroup_update_lru_size due to a santity check. */ static __always_inline void update_lru_sizes(struct lruvec *lruvec, - enum lru_list lru, unsigned long *nr_zone_taken, - unsigned long nr_taken) + enum lru_list lru, unsigned long *nr_zone_taken) { int zid; @@ -1392,11 +1401,11 @@ static __always_inline void update_lru_sizes(struct lruvec *lruvec, continue; __update_lru_size(lruvec, lru, zid, -nr_zone_taken[zid]); +#ifdef CONFIG_MEMCG + mem_cgroup_update_lru_size(lruvec, lru, zid, -nr_zone_taken[zid]); +#endif } -#ifdef CONFIG_MEMCG - mem_cgroup_update_lru_size(lruvec, lru, -nr_taken); -#endif } /* @@ -1501,7 +1510,7 @@ static unsigned long isolate_lru_pages(unsigned long nr_to_scan, *nr_scanned = scan; trace_mm_vmscan_lru_isolate(sc->reclaim_idx, sc->order, nr_to_scan, scan, nr_taken, mode, is_file_lru(lru)); - update_lru_sizes(lruvec, lru, nr_zone_taken, nr_taken); + update_lru_sizes(lruvec, lru, nr_zone_taken); return nr_taken; } @@ -2047,10 +2056,8 @@ static bool inactive_list_is_low(struct lruvec *lruvec, bool file, if (!managed_zone(zone)) continue; - inactive_zone = zone_page_state(zone, - NR_ZONE_LRU_BASE + (file * LRU_FILE)); - active_zone = zone_page_state(zone, - NR_ZONE_LRU_BASE + (file * LRU_FILE) + LRU_ACTIVE); + inactive_zone = lruvec_zone_lru_size(lruvec, file * LRU_FILE, zid); + active_zone = lruvec_zone_lru_size(lruvec, (file * LRU_FILE) + LRU_ACTIVE, zid); inactive -= min(inactive, inactive_zone); active -= min(active, active_zone); From 8c2dd3e4a4bae78093c4a5cee6494877651be3c9 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 10 Jan 2017 16:58:06 -0800 Subject: [PATCH 277/645] mm: rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free Patch series "Page fragment updates", v4. This patch series takes care of a few cleanups for the page fragments API. First we do some renames so that things are much more consistent. First we move the page_frag_ portion of the name to the front of the functions names. Secondly we split out the cache specific functions from the other page fragment functions by adding the word "cache" to the name. Finally I added a bit of documentation that will hopefully help to explain some of this. I plan to revisit this later as we get things more ironed out in the near future with the changes planned for the DMA setup to support eXpress Data Path. This patch (of 3): This patch renames the page frag functions to be more consistent with other APIs. Specifically we place the name page_frag first in the name and then have either an alloc or free call name that we append as the suffix. This makes it a bit clearer in terms of naming. In addition we drop the leading double underscores since we are technically no longer a backing interface and instead the front end that is called from the networking APIs. Link: http://lkml.kernel.org/r/20170104023854.13451.67390.stgit@localhost.localdomain Signed-off-by: Alexander Duyck Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 6 +++--- include/linux/skbuff.h | 2 +- mm/page_alloc.c | 10 +++++----- net/core/skbuff.c | 8 ++++---- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 7806a8f80abc..ed77a86fbbb0 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -501,9 +501,9 @@ extern void free_hot_cold_page_list(struct list_head *list, bool cold); struct page_frag_cache; extern void __page_frag_drain(struct page *page, unsigned int order, unsigned int count); -extern void *__alloc_page_frag(struct page_frag_cache *nc, - unsigned int fragsz, gfp_t gfp_mask); -extern void __free_page_frag(void *addr); +extern void *page_frag_alloc(struct page_frag_cache *nc, + unsigned int fragsz, gfp_t gfp_mask); +extern void page_frag_free(void *addr); #define __free_page(page) __free_pages((page), 0) #define free_page(addr) free_pages((addr), 0) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index b53c0cfd417e..a410715bbef8 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2480,7 +2480,7 @@ static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev, static inline void skb_free_frag(void *addr) { - __free_page_frag(addr); + page_frag_free(addr); } void *napi_alloc_frag(unsigned int fragsz); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 74afdb4177cb..097893ffe194 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3931,8 +3931,8 @@ void __page_frag_drain(struct page *page, unsigned int order, } EXPORT_SYMBOL(__page_frag_drain); -void *__alloc_page_frag(struct page_frag_cache *nc, - unsigned int fragsz, gfp_t gfp_mask) +void *page_frag_alloc(struct page_frag_cache *nc, + unsigned int fragsz, gfp_t gfp_mask) { unsigned int size = PAGE_SIZE; struct page *page; @@ -3983,19 +3983,19 @@ refill: return nc->va + offset; } -EXPORT_SYMBOL(__alloc_page_frag); +EXPORT_SYMBOL(page_frag_alloc); /* * Frees a page fragment allocated out of either a compound or order 0 page. */ -void __free_page_frag(void *addr) +void page_frag_free(void *addr) { struct page *page = virt_to_head_page(addr); if (unlikely(put_page_testzero(page))) __free_pages_ok(page, compound_order(page)); } -EXPORT_SYMBOL(__free_page_frag); +EXPORT_SYMBOL(page_frag_free); static void *make_alloc_exact(unsigned long addr, unsigned int order, size_t size) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 5a03730fbc1a..734c71468b01 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -369,7 +369,7 @@ static void *__netdev_alloc_frag(unsigned int fragsz, gfp_t gfp_mask) local_irq_save(flags); nc = this_cpu_ptr(&netdev_alloc_cache); - data = __alloc_page_frag(nc, fragsz, gfp_mask); + data = page_frag_alloc(nc, fragsz, gfp_mask); local_irq_restore(flags); return data; } @@ -391,7 +391,7 @@ static void *__napi_alloc_frag(unsigned int fragsz, gfp_t gfp_mask) { struct napi_alloc_cache *nc = this_cpu_ptr(&napi_alloc_cache); - return __alloc_page_frag(&nc->page, fragsz, gfp_mask); + return page_frag_alloc(&nc->page, fragsz, gfp_mask); } void *napi_alloc_frag(unsigned int fragsz) @@ -441,7 +441,7 @@ struct sk_buff *__netdev_alloc_skb(struct net_device *dev, unsigned int len, local_irq_save(flags); nc = this_cpu_ptr(&netdev_alloc_cache); - data = __alloc_page_frag(nc, len, gfp_mask); + data = page_frag_alloc(nc, len, gfp_mask); pfmemalloc = nc->pfmemalloc; local_irq_restore(flags); @@ -505,7 +505,7 @@ struct sk_buff *__napi_alloc_skb(struct napi_struct *napi, unsigned int len, if (sk_memalloc_socks()) gfp_mask |= __GFP_MEMALLOC; - data = __alloc_page_frag(&nc->page, len, gfp_mask); + data = page_frag_alloc(&nc->page, len, gfp_mask); if (unlikely(!data)) return NULL; From 2976db8018532b624c4123ae662fbc0814877abf Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 10 Jan 2017 16:58:09 -0800 Subject: [PATCH 278/645] mm: rename __page_frag functions to __page_frag_cache, drop order from drain This patch does two things. First it goes through and renames the __page_frag prefixed functions to __page_frag_cache so that we can be clear that we are draining or refilling the cache, not the frags themselves. Second we drop the order parameter from __page_frag_cache_drain since we don't actually need to pass it since all fragments are either order 0 or must be a compound page. Link: http://lkml.kernel.org/r/20170104023954.13451.5678.stgit@localhost.localdomain Signed-off-by: Alexander Duyck Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/ethernet/intel/igb/igb_main.c | 6 +++--- include/linux/gfp.h | 3 +-- mm/page_alloc.c | 13 +++++++------ 3 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index a761001308dc..1515abaa5ac9 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -3962,8 +3962,8 @@ static void igb_clean_rx_ring(struct igb_ring *rx_ring) PAGE_SIZE, DMA_FROM_DEVICE, DMA_ATTR_SKIP_CPU_SYNC); - __page_frag_drain(buffer_info->page, 0, - buffer_info->pagecnt_bias); + __page_frag_cache_drain(buffer_info->page, + buffer_info->pagecnt_bias); buffer_info->page = NULL; } @@ -6991,7 +6991,7 @@ static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, PAGE_SIZE, DMA_FROM_DEVICE, DMA_ATTR_SKIP_CPU_SYNC); - __page_frag_drain(page, 0, rx_buffer->pagecnt_bias); + __page_frag_cache_drain(page, rx_buffer->pagecnt_bias); } /* clear contents of rx_buffer */ diff --git a/include/linux/gfp.h b/include/linux/gfp.h index ed77a86fbbb0..0fe0b6295ab5 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -499,8 +499,7 @@ extern void free_hot_cold_page(struct page *page, bool cold); extern void free_hot_cold_page_list(struct list_head *list, bool cold); struct page_frag_cache; -extern void __page_frag_drain(struct page *page, unsigned int order, - unsigned int count); +extern void __page_frag_cache_drain(struct page *page, unsigned int count); extern void *page_frag_alloc(struct page_frag_cache *nc, unsigned int fragsz, gfp_t gfp_mask); extern void page_frag_free(void *addr); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 097893ffe194..d604d2596b7b 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3896,8 +3896,8 @@ EXPORT_SYMBOL(free_pages); * drivers to provide a backing region of memory for use as either an * sk_buff->head, or to be used in the "frags" portion of skb_shared_info. */ -static struct page *__page_frag_refill(struct page_frag_cache *nc, - gfp_t gfp_mask) +static struct page *__page_frag_cache_refill(struct page_frag_cache *nc, + gfp_t gfp_mask) { struct page *page = NULL; gfp_t gfp = gfp_mask; @@ -3917,19 +3917,20 @@ static struct page *__page_frag_refill(struct page_frag_cache *nc, return page; } -void __page_frag_drain(struct page *page, unsigned int order, - unsigned int count) +void __page_frag_cache_drain(struct page *page, unsigned int count) { VM_BUG_ON_PAGE(page_ref_count(page) == 0, page); if (page_ref_sub_and_test(page, count)) { + unsigned int order = compound_order(page); + if (order == 0) free_hot_cold_page(page, false); else __free_pages_ok(page, order); } } -EXPORT_SYMBOL(__page_frag_drain); +EXPORT_SYMBOL(__page_frag_cache_drain); void *page_frag_alloc(struct page_frag_cache *nc, unsigned int fragsz, gfp_t gfp_mask) @@ -3940,7 +3941,7 @@ void *page_frag_alloc(struct page_frag_cache *nc, if (unlikely(!nc->va)) { refill: - page = __page_frag_refill(nc, gfp_mask); + page = __page_frag_cache_refill(nc, gfp_mask); if (!page) return NULL; From 4d09d0f45dd5d78b3a301c238272211d1ea7d9e6 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 10 Jan 2017 16:58:12 -0800 Subject: [PATCH 279/645] mm: add documentation for page fragment APIs This is a first pass at trying to add documentation for the page_frag APIs. They may still change over time but for now I thought I would try to get these documented so that as more network drivers and stack calls make use of them we have one central spot to document how they are meant to be used. Link: http://lkml.kernel.org/r/20170104024157.13451.6758.stgit@localhost.localdomain Signed-off-by: Alexander Duyck Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/page_frags | 42 +++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/vm/page_frags diff --git a/Documentation/vm/page_frags b/Documentation/vm/page_frags new file mode 100644 index 000000000000..a6714565dbf9 --- /dev/null +++ b/Documentation/vm/page_frags @@ -0,0 +1,42 @@ +Page fragments +-------------- + +A page fragment is an arbitrary-length arbitrary-offset area of memory +which resides within a 0 or higher order compound page. Multiple +fragments within that page are individually refcounted, in the page's +reference counter. + +The page_frag functions, page_frag_alloc and page_frag_free, provide a +simple allocation framework for page fragments. This is used by the +network stack and network device drivers to provide a backing region of +memory for use as either an sk_buff->head, or to be used in the "frags" +portion of skb_shared_info. + +In order to make use of the page fragment APIs a backing page fragment +cache is needed. This provides a central point for the fragment allocation +and tracks allows multiple calls to make use of a cached page. The +advantage to doing this is that multiple calls to get_page can be avoided +which can be expensive at allocation time. However due to the nature of +this caching it is required that any calls to the cache be protected by +either a per-cpu limitation, or a per-cpu limitation and forcing interrupts +to be disabled when executing the fragment allocation. + +The network stack uses two separate caches per CPU to handle fragment +allocation. The netdev_alloc_cache is used by callers making use of the +__netdev_alloc_frag and __netdev_alloc_skb calls. The napi_alloc_cache is +used by callers of the __napi_alloc_frag and __napi_alloc_skb calls. The +main difference between these two calls is the context in which they may be +called. The "netdev" prefixed functions are usable in any context as these +functions will disable interrupts, while the "napi" prefixed functions are +only usable within the softirq context. + +Many network device drivers use a similar methodology for allocating page +fragments, but the page fragments are cached at the ring or descriptor +level. In order to enable these cases it is necessary to provide a generic +way of tearing down a page cache. For this reason __page_frag_cache_drain +was implemented. It allows for freeing multiple references from a single +page via a single call. The advantage to doing this is that it allows for +cleaning up the multiple references that were added to a page in order to +avoid calling get_page per allocation. + +Alexander Duyck, Nov 29, 2016. From f05714293a591038304ddae7cb0dd747bb3786cc Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 10 Jan 2017 16:58:15 -0800 Subject: [PATCH 280/645] mm: support anonymous stable page During developemnt for zram-swap asynchronous writeback, I found strange corruption of compressed page, resulting in: Modules linked in: zram(E) CPU: 3 PID: 1520 Comm: zramd-1 Tainted: G E 4.8.0-mm1-00320-ge0d4894c9c38-dirty #3274 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff88007620b840 task.stack: ffff880078090000 RIP: set_freeobj.part.43+0x1c/0x1f RSP: 0018:ffff880078093ca8 EFLAGS: 00010246 RAX: 0000000000000018 RBX: ffff880076798d88 RCX: ffffffff81c408c8 RDX: 0000000000000018 RSI: 0000000000000000 RDI: 0000000000000246 RBP: ffff880078093cb0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88005bc43030 R11: 0000000000001df3 R12: ffff880076798d88 R13: 000000000005bc43 R14: ffff88007819d1b8 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88007e380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc934048f20 CR3: 0000000077b01000 CR4: 00000000000406e0 Call Trace: obj_malloc+0x22b/0x260 zs_malloc+0x1e4/0x580 zram_bvec_rw+0x4cd/0x830 [zram] page_requests_rw+0x9c/0x130 [zram] zram_thread+0xe6/0x173 [zram] kthread+0xca/0xe0 ret_from_fork+0x25/0x30 With investigation, it reveals currently stable page doesn't support anonymous page. IOW, reuse_swap_page can reuse the page without waiting writeback completion so it can overwrite page zram is compressing. Unfortunately, zram has used per-cpu stream feature from v4.7. It aims for increasing cache hit ratio of scratch buffer for compressing. Downside of that approach is that zram should ask memory space for compressed page in per-cpu context which requires stricted gfp flag which could be failed. If so, it retries to allocate memory space out of per-cpu context so it could get memory this time and compress the data again, copies it to the memory space. In this scenario, zram assumes the data should never be changed but it is not true unless stable page supports. So, If the data is changed under us, zram can make buffer overrun because second compression size could be bigger than one we got in previous trial and blindly, copy bigger size object to smaller buffer which is buffer overrun. The overrun breaks zsmalloc free object chaining so system goes crash like above. I think below is same problem. https://bugzilla.suse.com/show_bug.cgi?id=997574 Unfortunately, reuse_swap_page should be atomic so that we cannot wait on writeback in there so the approach in this patch is simply return false if we found it needs stable page. Although it increases memory footprint temporarily, it happens rarely and it should be reclaimed easily althoug it happened. Also, It would be better than waiting of IO completion, which is critial path for application latency. Fixes: da9556a2367c ("zram: user per-cpu compression streams") Link: http://lkml.kernel.org/r/20161120233015.GA14113@bbox Link: http://lkml.kernel.org/r/1482366980-3782-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim Acked-by: Hugh Dickins Cc: Sergey Senozhatsky Cc: Darrick J. Wong Cc: Takashi Iwai Cc: Hyeoncheol Lee Cc: Cc: Sangseok Lee Cc: [4.7+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swap.h | 3 ++- mm/swapfile.c | 20 +++++++++++++++++++- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/linux/swap.h b/include/linux/swap.h index 09f4be179ff3..7f47b7098b1b 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -150,8 +150,9 @@ enum { SWP_FILE = (1 << 7), /* set after swap_activate success */ SWP_AREA_DISCARD = (1 << 8), /* single-time swap area discards */ SWP_PAGE_DISCARD = (1 << 9), /* freed swap page-cluster discards */ + SWP_STABLE_WRITES = (1 << 10), /* no overwrite PG_writeback pages */ /* add others here before... */ - SWP_SCANNING = (1 << 10), /* refcount in scan_swap_map */ + SWP_SCANNING = (1 << 11), /* refcount in scan_swap_map */ }; #define SWAP_CLUSTER_MAX 32UL diff --git a/mm/swapfile.c b/mm/swapfile.c index 1c6e0321205d..4761701d1721 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -943,11 +943,25 @@ bool reuse_swap_page(struct page *page, int *total_mapcount) count = page_trans_huge_mapcount(page, total_mapcount); if (count <= 1 && PageSwapCache(page)) { count += page_swapcount(page); - if (count == 1 && !PageWriteback(page)) { + if (count != 1) + goto out; + if (!PageWriteback(page)) { delete_from_swap_cache(page); SetPageDirty(page); + } else { + swp_entry_t entry; + struct swap_info_struct *p; + + entry.val = page_private(page); + p = swap_info_get(entry); + if (p->flags & SWP_STABLE_WRITES) { + spin_unlock(&p->lock); + return false; + } + spin_unlock(&p->lock); } } +out: return count <= 1; } @@ -2448,6 +2462,10 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags) error = -ENOMEM; goto bad_swap; } + + if (bdi_cap_stable_pages_required(inode_to_bdi(inode))) + p->flags |= SWP_STABLE_WRITES; + if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) { int cpu; From e7ccfc4ccb703e0f033bd4617580039898e912dd Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 10 Jan 2017 16:58:18 -0800 Subject: [PATCH 281/645] zram: revalidate disk under init_lock Commit b4c5c60920e3 ("zram: avoid lockdep splat by revalidate_disk") moved revalidate_disk call out of init_lock to avoid lockdep false-positive splat. However, commit 08eee69fcf6b ("zram: remove init_lock in zram_make_request") removed init_lock in IO path so there is no worry about lockdep splat. So, let's restore it. This patch is needed to set BDI_CAP_STABLE_WRITES atomically in next patch. Fixes: da9556a2367c ("zram: user per-cpu compression streams") Link: http://lkml.kernel.org/r/1482366980-3782-3-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim Reviewed-by: Sergey Senozhatsky Cc: Takashi Iwai Cc: Hyeoncheol Lee Cc: Cc: Sangseok Lee Cc: Hugh Dickins Cc: Darrick J. Wong Cc: [4.7+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/zram/zram_drv.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 15f58ab44d0b..195376b4472b 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -1095,14 +1095,8 @@ static ssize_t disksize_store(struct device *dev, zram->comp = comp; zram->disksize = disksize; set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT); - up_write(&zram->init_lock); - - /* - * Revalidate disk out of the init_lock to avoid lockdep splat. - * It's okay because disk's capacity is protected by init_lock - * so that revalidate_disk always sees up-to-date capacity. - */ revalidate_disk(zram->disk); + up_write(&zram->init_lock); return len; From b09ab054b69b07077bd3292f67e777861ac796e5 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 10 Jan 2017 16:58:21 -0800 Subject: [PATCH 282/645] zram: support BDI_CAP_STABLE_WRITES zram has used per-cpu stream feature from v4.7. It aims for increasing cache hit ratio of scratch buffer for compressing. Downside of that approach is that zram should ask memory space for compressed page in per-cpu context which requires stricted gfp flag which could be failed. If so, it retries to allocate memory space out of per-cpu context so it could get memory this time and compress the data again, copies it to the memory space. In this scenario, zram assumes the data should never be changed but it is not true without stable page support. So, If the data is changed under us, zram can make buffer overrun so that zsmalloc free object chain is broken so system goes crash like below https://bugzilla.suse.com/show_bug.cgi?id=997574 This patch adds BDI_CAP_STABLE_WRITES to zram for declaring "I am block device needing *stable write*". Fixes: da9556a2367c ("zram: user per-cpu compression streams") Link: http://lkml.kernel.org/r/1482366980-3782-4-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim Reviewed-by: Sergey Senozhatsky Cc: Takashi Iwai Cc: Hyeoncheol Lee Cc: Cc: Sangseok Lee Cc: Hugh Dickins Cc: Darrick J. Wong Cc: [4.7+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/zram/zram_drv.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 195376b4472b..e5ab7d9e8c45 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -112,6 +113,14 @@ static inline bool is_partial_io(struct bio_vec *bvec) return bvec->bv_len != PAGE_SIZE; } +static void zram_revalidate_disk(struct zram *zram) +{ + revalidate_disk(zram->disk); + /* revalidate_disk reset the BDI_CAP_STABLE_WRITES so set again */ + zram->disk->queue->backing_dev_info.capabilities |= + BDI_CAP_STABLE_WRITES; +} + /* * Check if request is within bounds and aligned on zram logical blocks. */ @@ -1095,7 +1104,7 @@ static ssize_t disksize_store(struct device *dev, zram->comp = comp; zram->disksize = disksize; set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT); - revalidate_disk(zram->disk); + zram_revalidate_disk(zram); up_write(&zram->init_lock); return len; @@ -1143,7 +1152,7 @@ static ssize_t reset_store(struct device *dev, /* Make sure all the pending I/O are finished */ fsync_bdev(bdev); zram_reset_device(zram); - revalidate_disk(zram->disk); + zram_revalidate_disk(zram); bdput(bdev); mutex_lock(&bdev->bd_mutex); From c4e490cf148e85ead0d1b1c2caaba833f1d5b29f Mon Sep 17 00:00:00 2001 From: John Sperbeck Date: Tue, 10 Jan 2017 16:58:24 -0800 Subject: [PATCH 283/645] mm/slab.c: fix SLAB freelist randomization duplicate entries This patch fixes a bug in the freelist randomization code. When a high random number is used, the freelist will contain duplicate entries. It will result in different allocations sharing the same chunk. It will result in odd behaviours and crashes. It should be uncommon but it depends on the machines. We saw it happening more often on some machines (every few hours of running tests). Fixes: c7ce4f60ac19 ("mm: SLAB freelist randomization") Link: http://lkml.kernel.org/r/20170103181908.143178-1-thgarnie@google.com Signed-off-by: John Sperbeck Signed-off-by: Thomas Garnier Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/mm/slab.c b/mm/slab.c index 29bc6c0dedd0..4f2ec6bb46eb 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -2457,7 +2457,6 @@ union freelist_init_state { unsigned int pos; unsigned int *list; unsigned int count; - unsigned int rand; }; struct rnd_state rnd_state; }; @@ -2483,8 +2482,7 @@ static bool freelist_state_initialize(union freelist_init_state *state, } else { state->list = cachep->random_seq; state->count = count; - state->pos = 0; - state->rand = rand; + state->pos = rand % count; ret = true; } return ret; @@ -2493,7 +2491,9 @@ static bool freelist_state_initialize(union freelist_init_state *state, /* Get the next entry on the list and randomize it using a random shift */ static freelist_idx_t next_random_slot(union freelist_init_state *state) { - return (state->list[state->pos++] + state->rand) % state->count; + if (state->pos >= state->count) + state->pos = 0; + return state->list[state->pos++]; } /* Swap two freelist entries */ From e5bbc8a6c992901058bc09e2ce01d16c111ff047 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Tue, 10 Jan 2017 16:58:27 -0800 Subject: [PATCH 284/645] mm/hugetlb.c: fix reservation race when freeing surplus pages return_unused_surplus_pages() decrements the global reservation count, and frees any unused surplus pages that were backing the reservation. Commit 7848a4bf51b3 ("mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()") added a call to cond_resched_lock in the loop freeing the pages. As a result, the hugetlb_lock could be dropped, and someone else could use the pages that will be freed in subsequent iterations of the loop. This could result in inconsistent global hugetlb page state, application api failures (such as mmap) failures or application crashes. When dropping the lock in return_unused_surplus_pages, make sure that the global reservation count (resv_huge_pages) remains sufficiently large to prevent someone else from claiming pages about to be freed. Analyzed by Paul Cassella. Fixes: 7848a4bf51b3 ("mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()") Link: http://lkml.kernel.org/r/1483991767-6879-1-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Reported-by: Paul Cassella Suggested-by: Michal Hocko Cc: Masayoshi Mizuma Cc: Naoya Horiguchi Cc: Aneesh Kumar Cc: Hillf Danton Cc: [3.15+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 37 ++++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 3edb759c5c7d..c7025c132670 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1773,23 +1773,32 @@ free: } /* - * When releasing a hugetlb pool reservation, any surplus pages that were - * allocated to satisfy the reservation must be explicitly freed if they were - * never used. - * Called with hugetlb_lock held. + * This routine has two main purposes: + * 1) Decrement the reservation count (resv_huge_pages) by the value passed + * in unused_resv_pages. This corresponds to the prior adjustments made + * to the associated reservation map. + * 2) Free any unused surplus pages that may have been allocated to satisfy + * the reservation. As many as unused_resv_pages may be freed. + * + * Called with hugetlb_lock held. However, the lock could be dropped (and + * reacquired) during calls to cond_resched_lock. Whenever dropping the lock, + * we must make sure nobody else can claim pages we are in the process of + * freeing. Do this by ensuring resv_huge_page always is greater than the + * number of huge pages we plan to free when dropping the lock. */ static void return_unused_surplus_pages(struct hstate *h, unsigned long unused_resv_pages) { unsigned long nr_pages; - /* Uncommit the reservation */ - h->resv_huge_pages -= unused_resv_pages; - /* Cannot return gigantic pages currently */ if (hstate_is_gigantic(h)) - return; + goto out; + /* + * Part (or even all) of the reservation could have been backed + * by pre-allocated pages. Only free surplus pages. + */ nr_pages = min(unused_resv_pages, h->surplus_huge_pages); /* @@ -1799,12 +1808,22 @@ static void return_unused_surplus_pages(struct hstate *h, * when the nodes with surplus pages have no free pages. * free_pool_huge_page() will balance the the freed pages across the * on-line nodes with memory and will handle the hstate accounting. + * + * Note that we decrement resv_huge_pages as we free the pages. If + * we drop the lock, resv_huge_pages will still be sufficiently large + * to cover subsequent pages we may free. */ while (nr_pages--) { + h->resv_huge_pages--; + unused_resv_pages--; if (!free_pool_huge_page(h, &node_states[N_MEMORY], 1)) - break; + goto out; cond_resched_lock(&hugetlb_lock); } + +out: + /* Fully uncommit the reservation */ + h->resv_huge_pages -= unused_resv_pages; } From 575b1967e10a1f3038266244d2c7a3ca6b99fed8 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 10 Jan 2017 16:58:30 -0800 Subject: [PATCH 285/645] timerfd: export defines to userspace Since userspace is expected to call timerfd syscalls directly with these flags/ioctls, make sure we export them so they don't have to duplicate the values themselves. Link: http://lkml.kernel.org/r/20161219064052.7196-1-vapier@gentoo.org Signed-off-by: Mike Frysinger Acked-by: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/timerfd.h | 20 +------------------- include/uapi/linux/Kbuild | 1 + include/uapi/linux/timerfd.h | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 38 insertions(+), 19 deletions(-) create mode 100644 include/uapi/linux/timerfd.h diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h index bd36ce431e32..bab0b1ad0613 100644 --- a/include/linux/timerfd.h +++ b/include/linux/timerfd.h @@ -8,23 +8,7 @@ #ifndef _LINUX_TIMERFD_H #define _LINUX_TIMERFD_H -/* For O_CLOEXEC and O_NONBLOCK */ -#include - -/* For _IO helpers */ -#include - -/* - * CAREFUL: Check include/asm-generic/fcntl.h when defining - * new flags, since they might collide with O_* ones. We want - * to re-use O_* flags that couldn't possibly have a meaning - * from eventfd, in order to leave a free define-space for - * shared O_* flags. - */ -#define TFD_TIMER_ABSTIME (1 << 0) -#define TFD_TIMER_CANCEL_ON_SET (1 << 1) -#define TFD_CLOEXEC O_CLOEXEC -#define TFD_NONBLOCK O_NONBLOCK +#include #define TFD_SHARED_FCNTL_FLAGS (TFD_CLOEXEC | TFD_NONBLOCK) /* Flags for timerfd_create. */ @@ -32,6 +16,4 @@ /* Flags for timerfd_settime. */ #define TFD_SETTIME_FLAGS (TFD_TIMER_ABSTIME | TFD_TIMER_CANCEL_ON_SET) -#define TFD_IOC_SET_TICKS _IOW('T', 0, u64) - #endif /* _LINUX_TIMERFD_H */ diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index a8b93e685239..f330ba4547cf 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -414,6 +414,7 @@ header-y += telephony.h header-y += termios.h header-y += thermal.h header-y += time.h +header-y += timerfd.h header-y += times.h header-y += timex.h header-y += tiocl.h diff --git a/include/uapi/linux/timerfd.h b/include/uapi/linux/timerfd.h new file mode 100644 index 000000000000..6fcfaa8da173 --- /dev/null +++ b/include/uapi/linux/timerfd.h @@ -0,0 +1,36 @@ +/* + * include/linux/timerfd.h + * + * Copyright (C) 2007 Davide Libenzi + * + */ + +#ifndef _UAPI_LINUX_TIMERFD_H +#define _UAPI_LINUX_TIMERFD_H + +#include + +/* For O_CLOEXEC and O_NONBLOCK */ +#include + +/* For _IO helpers */ +#include + +/* + * CAREFUL: Check include/asm-generic/fcntl.h when defining + * new flags, since they might collide with O_* ones. We want + * to re-use O_* flags that couldn't possibly have a meaning + * from eventfd, in order to leave a free define-space for + * shared O_* flags. + * + * Also make sure to update the masks in include/linux/timerfd.h + * when adding new flags. + */ +#define TFD_TIMER_ABSTIME (1 << 0) +#define TFD_TIMER_CANCEL_ON_SET (1 << 1) +#define TFD_CLOEXEC O_CLOEXEC +#define TFD_NONBLOCK O_NONBLOCK + +#define TFD_IOC_SET_TICKS _IOW('T', 0, __u64) + +#endif /* _UAPI_LINUX_TIMERFD_H */ From cd3776638003b3362d9d7d1f27bcb80c276e2c28 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 10 Jan 2017 22:33:30 +0200 Subject: [PATCH 286/645] net/mlx5e: Properly handle offloading of source udp port for IP tunnels We can offload the matching on source udp port of ip tunnels for decapsulation. We can not offload setting source udp port for tunnels as part of encapsulation. Fix both the code that deals with matching offload (decap) and the code that deal with encap offload to align with that. Fixes: a54e20b4fcae ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: bbd00f7e2349 ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: Or Gerlitz Reviewed-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index f8829b517156..b60feceab63b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -239,10 +239,6 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, if (memchr_inv(&mask->dst, 0xff, sizeof(mask->dst))) return -EOPNOTSUPP; - /* udp src port isn't supported */ - if (memchr_inv(&mask->src, 0, sizeof(mask->src))) - return -EOPNOTSUPP; - if (mlx5e_vxlan_lookup_port(priv, be16_to_cpu(key->dst)) && MLX5_CAP_ESW(priv->mdev, vxlan_encap_decap)) parse_vxlan_attr(spec, f); @@ -254,6 +250,10 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport, ntohs(key->dst)); + MLX5_SET(fte_match_set_lyr_2_4, headers_c, + udp_sport, ntohs(mask->src)); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, + udp_sport, ntohs(key->src)); } else { /* udp dst port must be given */ return -EOPNOTSUPP; } @@ -796,6 +796,10 @@ static int mlx5e_attach_encap(struct mlx5e_priv *priv, if (!memchr_inv(&key->tp_dst, 0, sizeof(key->tp_dst))) return -EOPNOTSUPP; + /* setting udp src port isn't supported */ + if (memchr_inv(&key->tp_src, 0, sizeof(key->tp_src))) + return -EOPNOTSUPP; + if (mlx5e_vxlan_lookup_port(priv, be16_to_cpu(key->tp_dst)) && MLX5_CAP_ESW(priv->mdev, vxlan_encap_decap)) { info.tp_dst = key->tp_dst; From 2fcd82e9be133e4ec777f66fd67a8fb8e7748b1b Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 10 Jan 2017 22:33:31 +0200 Subject: [PATCH 287/645] net/mlx5e: Warn when rejecting offload attempts of IP tunnels We silently reject offloading of IPv6 tunnels, non vxlan tunnels, vxlan tunnels where the dst port to match is not provided, etc. Be a bit more verbose and print a warning so the user better realizes what went wrong here and can fix it. Fixes: a54e20b4fcae ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: bbd00f7e2349 ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: Or Gerlitz Reviewed-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx5/core/en_tc.c | 30 +++++++++++++++---- 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index b60feceab63b..d2fc055f054a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -237,13 +237,16 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, /* Full udp dst port must be given */ if (memchr_inv(&mask->dst, 0xff, sizeof(mask->dst))) - return -EOPNOTSUPP; + goto vxlan_match_offload_err; if (mlx5e_vxlan_lookup_port(priv, be16_to_cpu(key->dst)) && MLX5_CAP_ESW(priv->mdev, vxlan_encap_decap)) parse_vxlan_attr(spec, f); - else + else { + netdev_warn(priv->netdev, + "%d isn't an offloaded vxlan udp dport\n", be16_to_cpu(key->dst)); return -EOPNOTSUPP; + } MLX5_SET(fte_match_set_lyr_2_4, headers_c, udp_dport, ntohs(mask->dst)); @@ -255,7 +258,10 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_sport, ntohs(key->src)); } else { /* udp dst port must be given */ - return -EOPNOTSUPP; +vxlan_match_offload_err: + netdev_warn(priv->netdev, + "IP tunnel decap offload supported only for vxlan, must set UDP dport\n"); + return -EOPNOTSUPP; } if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS)) { @@ -346,6 +352,9 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, if (parse_tunnel_attr(priv, spec, f)) return -EOPNOTSUPP; break; + case FLOW_DISSECTOR_KEY_IPV6_ADDRS: + netdev_warn(priv->netdev, + "IPv6 tunnel decap offload isn't supported\n"); default: return -EOPNOTSUPP; } @@ -792,13 +801,17 @@ static int mlx5e_attach_encap(struct mlx5e_priv *priv, int tunnel_type; int err; - /* udp dst port must be given */ + /* udp dst port must be set */ if (!memchr_inv(&key->tp_dst, 0, sizeof(key->tp_dst))) - return -EOPNOTSUPP; + goto vxlan_encap_offload_err; /* setting udp src port isn't supported */ - if (memchr_inv(&key->tp_src, 0, sizeof(key->tp_src))) + if (memchr_inv(&key->tp_src, 0, sizeof(key->tp_src))) { +vxlan_encap_offload_err: + netdev_warn(priv->netdev, + "must set udp dst port and not set udp src port\n"); return -EOPNOTSUPP; + } if (mlx5e_vxlan_lookup_port(priv, be16_to_cpu(key->tp_dst)) && MLX5_CAP_ESW(priv->mdev, vxlan_encap_decap)) { @@ -806,6 +819,8 @@ static int mlx5e_attach_encap(struct mlx5e_priv *priv, info.tun_id = tunnel_id_to_key32(key->tun_id); tunnel_type = MLX5_HEADER_TYPE_VXLAN; } else { + netdev_warn(priv->netdev, + "%d isn't an offloaded vxlan udp dport\n", be16_to_cpu(key->tp_dst)); return -EOPNOTSUPP; } @@ -813,6 +828,9 @@ static int mlx5e_attach_encap(struct mlx5e_priv *priv, case AF_INET: info.daddr = key->u.ipv4.dst; break; + case AF_INET6: + netdev_warn(priv->netdev, + "IPv6 tunnel encap offload isn't supported\n"); default: return -EOPNOTSUPP; } From a42485eb0ee458da3a0df82b0e42ab58ce76be05 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 10 Jan 2017 22:33:32 +0200 Subject: [PATCH 288/645] net/mlx5e: TC ipv4 tunnel encap offload error flow fixes When the route lookup fails we should return the actual error. When the neigh isn't valid, we should return -EOPNOTSUPP as done in similar cases along the code. When the offload can't take place as of invalid neigh etc, we must release the neigh. Fixes: a54e20b4fcae ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: Or Gerlitz Reviewed-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index d2fc055f054a..b62f06f3f7e0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -656,17 +656,14 @@ static int mlx5e_route_lookup_ipv4(struct mlx5e_priv *priv, #if IS_ENABLED(CONFIG_INET) rt = ip_route_output_key(dev_net(mirred_dev), fl4); - if (IS_ERR(rt)) { - pr_warn("%s: no route to %pI4\n", __func__, &fl4->daddr); - return -EOPNOTSUPP; - } + if (IS_ERR(rt)) + return PTR_ERR(rt); #else return -EOPNOTSUPP; #endif if (!switchdev_port_same_parent_id(priv->netdev, rt->dst.dev)) { - pr_warn("%s: Can't offload the flow, netdevices aren't on the same HW e-switch\n", - __func__); + pr_warn("%s: can't offload, devices not on same HW e-switch\n", __func__); ip_rt_put(rt); return -EOPNOTSUPP; } @@ -727,8 +724,8 @@ static int mlx5e_create_encap_header_ipv4(struct mlx5e_priv *priv, struct net_device **out_dev) { int max_encap_size = MLX5_CAP_ESW(priv->mdev, max_encap_header_size); + struct neighbour *n = NULL; struct flowi4 fl4 = {}; - struct neighbour *n; char *encap_header; int encap_size; __be32 saddr; @@ -759,7 +756,8 @@ static int mlx5e_create_encap_header_ipv4(struct mlx5e_priv *priv, e->out_dev = *out_dev; if (!(n->nud_state & NUD_VALID)) { - err = -ENOTSUPP; + pr_warn("%s: can't offload, neighbour to %pI4 invalid\n", __func__, &fl4.daddr); + err = -EOPNOTSUPP; goto out; } @@ -781,6 +779,8 @@ static int mlx5e_create_encap_header_ipv4(struct mlx5e_priv *priv, err = mlx5_encap_alloc(priv->mdev, e->tunnel_type, encap_size, encap_header, &e->encap_id); out: + if (err && n) + neigh_release(n); kfree(encap_header); return err; } From 2e72eb438ce5ea9fa118edfd9a5f628c2a69111a Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 10 Jan 2017 22:33:33 +0200 Subject: [PATCH 289/645] net/mlx5e: Properly get address type of encapsulation IP headers As done elsewhere in our TC/flower offload code, the address type of the encapsulation IP headers should be realized accroding to the addr_type field of the encapsulation control dissector key, do that. Fixes: bbd00f7e2349 ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: Or Gerlitz Reviewed-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index b62f06f3f7e0..9cfddd9fc097 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -225,6 +225,11 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, void *headers_v = MLX5_ADDR_OF(fte_match_param, spec->match_value, outer_headers); + struct flow_dissector_key_control *enc_control = + skb_flow_dissector_target(f->dissector, + FLOW_DISSECTOR_KEY_ENC_CONTROL, + f->key); + if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_ENC_PORTS)) { struct flow_dissector_key_ports *key = skb_flow_dissector_target(f->dissector, @@ -264,7 +269,7 @@ vxlan_match_offload_err: return -EOPNOTSUPP; } - if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS)) { + if (enc_control->addr_type == FLOW_DISSECTOR_KEY_IPV4_ADDRS) { struct flow_dissector_key_ipv4_addrs *key = skb_flow_dissector_target(f->dissector, FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS, @@ -286,10 +291,10 @@ vxlan_match_offload_err: MLX5_SET(fte_match_set_lyr_2_4, headers_v, dst_ipv4_dst_ipv6.ipv4_layout.ipv4, ntohl(key->dst)); - } - MLX5_SET_TO_ONES(fte_match_set_lyr_2_4, headers_c, ethertype); - MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, ETH_P_IP); + MLX5_SET_TO_ONES(fte_match_set_lyr_2_4, headers_c, ethertype); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, ETH_P_IP); + } /* Enforce DMAC when offloading incoming tunneled flows. * Flow counters require a match on the DMAC. From 0827444d052ba5347900376dbdbf5d9065d091d4 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 10 Jan 2017 22:33:34 +0200 Subject: [PATCH 290/645] net/mlx5e: Set inline mode requirements for matching on IP fragments For e-switch level matching on packets being an IP fragment, we need to make sure the source vport inline mode is L3, fix that. Fixes: 3f7d0eb42d59 ('net/mlx5e: Offload TC matching on packets being IP fragments') Signed-off-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 9cfddd9fc097..a35fa1eb0694 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -389,6 +389,10 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, MLX5_SET(fte_match_set_lyr_2_4, headers_c, frag, 1); MLX5_SET(fte_match_set_lyr_2_4, headers_v, frag, key->flags & FLOW_DIS_IS_FRAGMENT); + + /* the HW doesn't need L3 inline to match on frag=no */ + if (key->flags & FLOW_DIS_IS_FRAGMENT) + *min_inline = MLX5_INLINE_MODE_IP; } } From a757d108dc1a053722215ee89116f8af9bba1525 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Tue, 10 Jan 2017 22:33:35 +0200 Subject: [PATCH 291/645] net/mlx5e: Fix kbuild warnings for uninitialized parameters kbuild warn about parameters that may be used uninitialized, fix it. Fixes: a54e20b4fcae ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index a35fa1eb0694..5dbc81de34ee 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -737,8 +737,8 @@ static int mlx5e_create_encap_header_ipv4(struct mlx5e_priv *priv, struct flowi4 fl4 = {}; char *encap_header; int encap_size; - __be32 saddr; - int ttl; + __be32 saddr = 0; + int ttl = 0; int err; encap_header = kzalloc(max_encap_size, GFP_KERNEL); From 5e86397abe10aa4c884478a45e9a35b6a37d8d5d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 10 Jan 2017 22:33:36 +0200 Subject: [PATCH 292/645] net/mlx5e: Properly handle FW errors while adding TC rules When the firmware returns an error (common example is an attempt to add twice the same rule which is refused by the some FWs), we are not properly derefing/cleaning few resources allocated on the way. Examples are vport vlan deref under eswitch vlan offloads, and encap entry/neighbour deref under eswitch encapsulation offloads, fix that. Fixes: a54e20b4fcae ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: 8b32580df1cb ('net/mlx5e: Add TC vlan action for SRIOV offloads') Signed-off-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx5/core/en_tc.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 5dbc81de34ee..118cea5e5489 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -161,15 +161,21 @@ static void mlx5e_detach_encap(struct mlx5e_priv *priv, } } +/* we get here also when setting rule to the FW failed, etc. It means that the + * flow rule itself might not exist, but some offloading related to the actions + * should be cleaned. + */ static void mlx5e_tc_del_flow(struct mlx5e_priv *priv, struct mlx5e_tc_flow *flow) { struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; struct mlx5_fc *counter = NULL; - counter = mlx5_flow_rule_counter(flow->rule); - - mlx5_del_flow_rules(flow->rule); + if (!IS_ERR(flow->rule)) { + counter = mlx5_flow_rule_counter(flow->rule); + mlx5_del_flow_rules(flow->rule); + mlx5_fc_destroy(priv->mdev, counter); + } if (esw && esw->mode == SRIOV_OFFLOADS) { mlx5_eswitch_del_vlan_action(esw, flow->attr); @@ -177,8 +183,6 @@ static void mlx5e_tc_del_flow(struct mlx5e_priv *priv, mlx5e_detach_encap(priv, flow); } - mlx5_fc_destroy(priv->mdev, counter); - if (!mlx5e_tc_num_filters(priv) && (priv->fs.tc.t)) { mlx5_destroy_flow_table(priv->fs.tc.t); priv->fs.tc.t = NULL; @@ -1017,7 +1021,7 @@ int mlx5e_configure_flower(struct mlx5e_priv *priv, __be16 protocol, if (IS_ERR(flow->rule)) { err = PTR_ERR(flow->rule); - goto err_free; + goto err_del_rule; } err = rhashtable_insert_fast(&tc->ht, &flow->node, @@ -1028,7 +1032,7 @@ int mlx5e_configure_flower(struct mlx5e_priv *priv, __be16 protocol, goto out; err_del_rule: - mlx5_del_flow_rules(flow->rule); + mlx5e_tc_del_flow(priv, flow); err_free: kfree(flow); From 3deef8cea3efcaeeae240bb00541de66abb9bfa0 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Tue, 10 Jan 2017 22:33:37 +0200 Subject: [PATCH 293/645] net/mlx5e: Un-register uplink representor on nic_disable The code before this patch registered uplink e-Switch representor on nic_enable and unregistered on nic_cleanup, the right place for this unregister is in nic_disable. Fixes: 127ea380acc9 ("net/mlx5: Add Representors registration API") Signed-off-by: Saeed Mahameed Reviewed-by: Mohamad Haj Yahia Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 1236b27b1493..2b7dd315020c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3675,14 +3675,8 @@ static void mlx5e_nic_init(struct mlx5_core_dev *mdev, static void mlx5e_nic_cleanup(struct mlx5e_priv *priv) { - struct mlx5_core_dev *mdev = priv->mdev; - struct mlx5_eswitch *esw = mdev->priv.eswitch; - mlx5e_vxlan_cleanup(priv); - if (MLX5_CAP_GEN(mdev, vport_group_manager)) - mlx5_eswitch_unregister_vport_rep(esw, 0); - if (priv->xdp_prog) bpf_prog_put(priv->xdp_prog); } @@ -3807,9 +3801,14 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv) static void mlx5e_nic_disable(struct mlx5e_priv *priv) { + struct mlx5_core_dev *mdev = priv->mdev; + struct mlx5_eswitch *esw = mdev->priv.eswitch; + queue_work(priv->wq, &priv->set_rx_mode_work); + if (MLX5_CAP_GEN(mdev, vport_group_manager)) + mlx5_eswitch_unregister_vport_rep(esw, 0); mlx5e_disable_async_events(priv); - mlx5_lag_remove(priv->mdev); + mlx5_lag_remove(mdev); } static const struct mlx5e_profile mlx5e_nic_profile = { From 0bbcc0a8fc394d01988fe0263ccf7fddb77a12c3 Mon Sep 17 00:00:00 2001 From: Gil Rockah Date: Tue, 10 Jan 2017 22:33:38 +0200 Subject: [PATCH 294/645] net/mlx5e: Remove WARN_ONCE from adaptive moderation code When trying to do interface down or changing interface configuration under heavy traffic, some of the adaptive moderation corner cases can occur and leave a WARN_ONCE call trace in the kernel log. Those WARN_ONCE are meant for debug only, and should have been inserted only under debug. We avoid such call traces by removing those WARN_ONCE. Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Gil Rockah Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c index 1fffe48a93cc..cbfac06b7ffd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx_am.c @@ -109,7 +109,6 @@ static bool mlx5e_am_on_top(struct mlx5e_rx_am *am) switch (am->tune_state) { case MLX5E_AM_PARKING_ON_TOP: case MLX5E_AM_PARKING_TIRED: - WARN_ONCE(true, "mlx5e_am_on_top: PARKING\n"); return true; case MLX5E_AM_GOING_RIGHT: return (am->steps_left > 1) && (am->steps_right == 1); @@ -123,7 +122,6 @@ static void mlx5e_am_turn(struct mlx5e_rx_am *am) switch (am->tune_state) { case MLX5E_AM_PARKING_ON_TOP: case MLX5E_AM_PARKING_TIRED: - WARN_ONCE(true, "mlx5e_am_turn: PARKING\n"); break; case MLX5E_AM_GOING_RIGHT: am->tune_state = MLX5E_AM_GOING_LEFT; @@ -144,7 +142,6 @@ static int mlx5e_am_step(struct mlx5e_rx_am *am) switch (am->tune_state) { case MLX5E_AM_PARKING_ON_TOP: case MLX5E_AM_PARKING_TIRED: - WARN_ONCE(true, "mlx5e_am_step: PARKING\n"); break; case MLX5E_AM_GOING_RIGHT: if (am->profile_ix == (MLX5E_PARAMS_AM_NUM_PROFILES - 1)) @@ -282,10 +279,8 @@ static void mlx5e_am_calc_stats(struct mlx5e_rx_am_sample *start, u32 delta_us = ktime_us_delta(end->time, start->time); unsigned int npkts = end->pkt_ctr - start->pkt_ctr; - if (!delta_us) { - WARN_ONCE(true, "mlx5e_am_calc_stats: delta_us=0\n"); + if (!delta_us) return; - } curr_stats->ppms = (npkts * USEC_PER_MSEC) / delta_us; curr_stats->epms = (MLX5E_AM_NEVENTS * USEC_PER_MSEC) / delta_us; From 5e44fca5047054f1762813751626b5245e0da022 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Tue, 10 Jan 2017 22:33:39 +0200 Subject: [PATCH 295/645] net/mlx5: Only cancel recovery work when cleaning up device Do not attempt to drain the health workqueue when unloading the device in the recovery flow, this can cause a deadlock when the recovery work tries to cancel itself with sync. Because the work is no longer unconditionally canceled when unloading, it must be explicitly canceled in the AER flow. fixes: 689a248df83b ("net/mlx5: Cancel recovery work in remove flow") Signed-off-by: Daniel Jurgens Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 6547f22e6b9b..d01e9f21d469 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1195,7 +1195,8 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, { int err = 0; - mlx5_drain_health_wq(dev); + if (cleanup) + mlx5_drain_health_wq(dev); mutex_lock(&dev->intf_state_mutex); if (test_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state)) { @@ -1359,9 +1360,10 @@ static pci_ers_result_t mlx5_pci_err_detected(struct pci_dev *pdev, mlx5_enter_error_state(dev); mlx5_unload_one(dev, priv, false); - /* In case of kernel call save the pci state */ + /* In case of kernel call save the pci state and drain the health wq */ if (state) { pci_save_state(pdev); + mlx5_drain_health_wq(dev); mlx5_pci_disable_device(dev); } From 7ee7f45a763bd68c3a606595a8c1bb08c3e6146b Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Wed, 11 Jan 2017 01:27:21 +0200 Subject: [PATCH 296/645] mei: bus: enable OS version only for SPT and newer Sending OS version for support of TPM2_ChangeEPS() is required only for SPT FW (HMB version 2.0) and newer. On older platforms the command should be just ignored by the firmware but some older platforms misbehave so it's safer to send the command only if required. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=192051 Fixes: 7279b238bade (mei: send OS type to the FW) Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Tested-by: Jan Niehusmann Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 3 +++ drivers/misc/mei/debugfs.c | 2 ++ drivers/misc/mei/hbm.c | 4 ++++ drivers/misc/mei/hw.h | 6 ++++++ drivers/misc/mei/mei_dev.h | 2 ++ 5 files changed, 17 insertions(+) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 18e05ca7584f..3600c9993a98 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -152,6 +152,9 @@ static void mei_mkhi_fix(struct mei_cl_device *cldev) { int ret; + if (!cldev->bus->hbm_f_os_supported) + return; + ret = mei_cldev_enable(cldev); if (ret) return; diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c index c6c051b52f55..c6217a4993ad 100644 --- a/drivers/misc/mei/debugfs.c +++ b/drivers/misc/mei/debugfs.c @@ -180,6 +180,8 @@ static ssize_t mei_dbgfs_read_devstate(struct file *fp, char __user *ubuf, dev->hbm_f_ev_supported); pos += scnprintf(buf + pos, bufsz - pos, "\tFA: %01d\n", dev->hbm_f_fa_supported); + pos += scnprintf(buf + pos, bufsz - pos, "\tOS: %01d\n", + dev->hbm_f_os_supported); } pos += scnprintf(buf + pos, bufsz - pos, "pg: %s, %s\n", diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index dd7f15a65eed..25b4a1ba522d 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -989,6 +989,10 @@ static void mei_hbm_config_features(struct mei_device *dev) /* Fixed Address Client Support */ if (dev->version.major_version >= HBM_MAJOR_VERSION_FA) dev->hbm_f_fa_supported = 1; + + /* OS ver message Support */ + if (dev->version.major_version >= HBM_MAJOR_VERSION_OS) + dev->hbm_f_os_supported = 1; } /** diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index 9daf3f9aed25..e1e4d47d4d7d 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -76,6 +76,12 @@ #define HBM_MINOR_VERSION_FA 0 #define HBM_MAJOR_VERSION_FA 2 +/* + * MEI version with OS ver message support + */ +#define HBM_MINOR_VERSION_OS 0 +#define HBM_MAJOR_VERSION_OS 2 + /* Host bus message command opcode */ #define MEI_HBM_CMD_OP_MSK 0x7f /* Host bus message command RESPONSE */ diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 699693cd8c59..8dadb98662a9 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -406,6 +406,7 @@ const char *mei_pg_state_str(enum mei_pg_state state); * @hbm_f_ev_supported : hbm feature event notification * @hbm_f_fa_supported : hbm feature fixed address client * @hbm_f_ie_supported : hbm feature immediate reply to enum request + * @hbm_f_os_supported : hbm feature support OS ver message * * @me_clients_rwsem: rw lock over me_clients list * @me_clients : list of FW clients @@ -487,6 +488,7 @@ struct mei_device { unsigned int hbm_f_ev_supported:1; unsigned int hbm_f_fa_supported:1; unsigned int hbm_f_ie_supported:1; + unsigned int hbm_f_os_supported:1; struct rw_semaphore me_clients_rwsem; struct list_head me_clients; From 488debb9971bc7d0edd6d8080ba78ca02a04f6c4 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 5 Jan 2017 17:15:01 +0000 Subject: [PATCH 297/645] drivers: char: mem: Fix thinkos in kmem address checks When borrowing the pfn_valid() check from mmap_kmem(), somebody managed to get physical and virtual addresses spectacularly muddled up, such that we've ended up with checks for one being the other. Whilst this does indeed prevent out-of-bounds accesses crashing, on most systems it also prevents the more desirable use-case of working at all ever. Check the *virtual* offset correctly for what it is. Furthermore, do so in the right place - a read or write may span multiple pages, so a single up-front check is insufficient. High memory accesses already have a similar validity check just before the copy_to_user() call, so just make the low memory path fully consistent with that. Reported-by: Jason A. Donenfeld CC: stable@vger.kernel.org Fixes: 148a1bc84398 ("drivers: char: mem: Check {read,write}_kmem() addresses") Signed-off-by: Robin Murphy Signed-off-by: Greg Kroah-Hartman --- drivers/char/mem.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 5bb1985ec484..6d9cc2d39d22 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -381,9 +381,6 @@ static ssize_t read_kmem(struct file *file, char __user *buf, char *kbuf; /* k-addr because vread() takes vmlist_lock rwlock */ int err = 0; - if (!pfn_valid(PFN_DOWN(p))) - return -EIO; - read = 0; if (p < (unsigned long) high_memory) { low_count = count; @@ -412,6 +409,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf, * by the kernel or data corruption may occur */ kbuf = xlate_dev_kmem_ptr((void *)p); + if (!virt_addr_valid(kbuf)) + return -ENXIO; if (copy_to_user(buf, kbuf, sz)) return -EFAULT; @@ -482,6 +481,8 @@ static ssize_t do_write_kmem(unsigned long p, const char __user *buf, * corruption may occur. */ ptr = xlate_dev_kmem_ptr((void *)p); + if (!virt_addr_valid(ptr)) + return -ENXIO; copied = copy_from_user(ptr, buf, sz); if (copied) { @@ -512,9 +513,6 @@ static ssize_t write_kmem(struct file *file, const char __user *buf, char *kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */ int err = 0; - if (!pfn_valid(PFN_DOWN(p))) - return -EIO; - if (p < (unsigned long) high_memory) { unsigned long to_write = min_t(unsigned long, count, (unsigned long)high_memory - p); From 89d8232411a85b9a6b12fd5da4d07d8a138a8e0c Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Tue, 13 Dec 2016 17:27:56 +0100 Subject: [PATCH 298/645] tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx If we don't disable the transmitter in atmel_stop_tx, the DMA buffer continues to send data until it is emptied. This cause problems with the flow control (CTS is asserted and data are still sent). So, disabling the transmitter in atmel_stop_tx is a sane thing to do. Tested on at91sam9g35-cm(DMA) Tested for regressions on sama5d2-xplained(Fifo) and at91sam9g20ek(PDC) Cc: (beware, this won't apply before 4.3) Signed-off-by: Richard Genoud Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 168b10cad47b..f9d42de5ab2d 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -481,6 +481,14 @@ static void atmel_stop_tx(struct uart_port *port) /* disable PDC transmit */ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS); } + + /* + * Disable the transmitter. + * This is mandatory when DMA is used, otherwise the DMA buffer + * is fully transmitted. + */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS); + /* Disable interrupts */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); @@ -513,6 +521,9 @@ static void atmel_start_tx(struct uart_port *port) /* Enable interrupts */ atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); + + /* re-enable the transmitter */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN); } /* From b389f173aaa1204d6dc1f299082a162eb0491545 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Tue, 6 Dec 2016 13:05:33 +0100 Subject: [PATCH 299/645] tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done When using RS485 in half duplex, RX should be enabled when TX is finished, and stopped when TX starts. Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA was used. So, collisions could happened. But disabling RX in atmel_start_tx() uncovered another bug: RX was enabled again in the wrong place (in atmel_tx_dma) instead of being enabled when TX is finished (in atmel_complete_tx_dma), so the transmission simply stopped. This bug was not triggered before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was never disabled before. Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem. Cc: stable@vger.kernel.org Reported-by: Gil Weber Fixes: 0058f0871efe7b01c6 Tested-by: Gil Weber Signed-off-by: Richard Genoud Acked-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index f9d42de5ab2d..fabbe76203bb 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -809,6 +809,11 @@ static void atmel_complete_tx_dma(void *arg) */ if (!uart_circ_empty(xmit)) atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); + else if ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } spin_unlock_irqrestore(&port->lock, flags); } @@ -911,12 +916,6 @@ static void atmel_tx_dma(struct uart_port *port) desc->callback = atmel_complete_tx_dma; desc->callback_param = atmel_port; atmel_port->cookie_tx = dmaengine_submit(desc); - - } else { - if (port->rs485.flags & SER_RS485_ENABLED) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); - } } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) From c130b666a9a711f985a0a44b58699ebe14bb7245 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Wed, 28 Dec 2016 16:42:00 -0200 Subject: [PATCH 300/645] 8250_pci: Fix potential use-after-free in error path Commit f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery") introduces a potential use-after-free in case the pciserial_init_ports call in serial8250_io_resume fails, which may happen if a memory allocation fails or if the .init quirk failed for whatever reason). If this happen, further pci_get_drvdata will return a pointer to freed memory. This patch reworks the PCI recovery resume hook to restore the old priv structure in this case, which should be ok, since the ports were already detached. Such error during recovery causes us to give up on the recovery. Fixes: f209fa03fc9d ("serial: 8250_pci: Detach low-level driver during PCI error recovery") Reported-by: Michal Suchanek Signed-off-by: Gabriel Krisman Bertazi Signed-off-by: Guilherme G. Piccoli Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index aa0166b6d450..116436b7fa52 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5642,17 +5642,15 @@ static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev) static void serial8250_io_resume(struct pci_dev *dev) { struct serial_private *priv = pci_get_drvdata(dev); - const struct pciserial_board *board; + struct serial_private *new; if (!priv) return; - board = priv->board; - kfree(priv); - priv = pciserial_init_ports(dev, board); - - if (!IS_ERR(priv)) { - pci_set_drvdata(dev, priv); + new = pciserial_init_ports(dev, priv->board); + if (!IS_ERR(new)) { + pci_set_drvdata(dev, new); + kfree(priv); } } From 2bed8a8e70729f996af92042d3ad0f11870acc1f Mon Sep 17 00:00:00 2001 From: Daniel Jedrychowski Date: Mon, 12 Dec 2016 09:18:28 +1100 Subject: [PATCH 301/645] Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break When in RS485 emulation mode, __do_stop_tx_rs485() calls serial8250_clear_fifos(). This not only clears the FIFOs, but also sets all bits in their control register (UART_FCR) to 0. One of the effects of this is the disabling of the FIFOs, which turns them into single-byte holding registers. The rest of the driver doesn't know this, which results in the lions share of characters passed into a write call to be dropped. (I can supply logic analyzer screenshots if necessary) This fix replaces the serial8250_clear_fifos() call to serial8250_clear_and_reinit_fifos() - this prevents the "dropped characters" issue from manifesting again while retaining the requirement of clearing the RX FIFO after transmission if the SER_RS485_RX_DURING_TX flag is disabled. Signed-off-by: Daniel Jedrychowski Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fe4399b41df6..c13fec451d03 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1413,7 +1413,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p) * Enable previously disabled RX interrupts. */ if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) { - serial8250_clear_fifos(p); + serial8250_clear_and_reinit_fifos(p); p->ier |= UART_IER_RLSI | UART_IER_RDI; serial_port_out(&p->port, UART_IER, p->ier); From 6741f551a0b26479de2532ffa43a366747e6dbf3 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 11 Dec 2016 10:05:49 +0800 Subject: [PATCH 302/645] Revert "tty: serial: 8250: add CON_CONSDEV to flags" This commit needs to be reverted because it prevents people from using the serial console as a secondary console with input being directed to tty0. IOW, if you boot with console=ttyS0 console=tty0 then all kernels prior to this commit will produce output on both ttyS0 and tty0 but input will only be taken from tty0. With this patch the serial console will always be the primary console instead of tty0, potentially preventing people from getting into their machines in emergency situations. Fixes: d03516df8375 ("tty: serial: 8250: add CON_CONSDEV to flags") Signed-off-by: Herbert Xu Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 61569a765d9e..76e03a7de9cc 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -675,7 +675,7 @@ static struct console univ8250_console = { .device = uart_console_device, .setup = univ8250_console_setup, .match = univ8250_console_match, - .flags = CON_PRINTBUFFER | CON_ANYTIME | CON_CONSDEV, + .flags = CON_PRINTBUFFER | CON_ANYTIME, .index = -1, .data = &serial8250_reg, }; From 5b11ebedd6a8bb4271b796e498cd15c0fe1133b6 Mon Sep 17 00:00:00 2001 From: Pan Bian Date: Sat, 3 Dec 2016 16:56:49 +0800 Subject: [PATCH 303/645] extcon: return error code on failure Function get_zeroed_page() returns a NULL pointer if there is no enough memory. In function extcon_sync(), it returns 0 if the call to get_zeroed_page() fails. The return value 0 indicates success in the context, which is incosistent with the execution status. This patch fixes the bug by returning -ENOMEM. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188611 Signed-off-by: Pan Bian Fixes: a580982f0836e Cc: stable Acked-by: Chanwoo Choi Signed-off-by: Greg Kroah-Hartman --- drivers/extcon/extcon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index 78298460d168..7c1e3a7b14e0 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -453,7 +453,7 @@ int extcon_sync(struct extcon_dev *edev, unsigned int id) dev_err(&edev->dev, "out of memory in extcon_set_state\n"); kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE); - return 0; + return -ENOMEM; } length = name_show(&edev->dev, NULL, prop_buf); From 0fa2c8eb270413160557babda519aa3c21e2bfaf Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 2 Dec 2016 16:23:55 +0000 Subject: [PATCH 304/645] ppdev: don't print a free'd string A previous fix of a memory leak now prints the string 'name' that was previously free'd. Fix this by free'ing the string at the end of the function and adding an error exit path for the error conditions. CoverityScan CID#1384523 ("Use after free") Fixes: 2bd362d5f45c1 ("ppdev: fix memory leak") Signed-off-by: Colin Ian King Acked-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/char/ppdev.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index 02819e0703c8..87885d146dbb 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -290,6 +290,7 @@ static int register_device(int minor, struct pp_struct *pp) struct pardevice *pdev = NULL; char *name; struct pardev_cb ppdev_cb; + int rc = 0; name = kasprintf(GFP_KERNEL, CHRDEV "%x", minor); if (name == NULL) @@ -298,8 +299,8 @@ static int register_device(int minor, struct pp_struct *pp) port = parport_find_number(minor); if (!port) { pr_warn("%s: no associated port!\n", name); - kfree(name); - return -ENXIO; + rc = -ENXIO; + goto err; } memset(&ppdev_cb, 0, sizeof(ppdev_cb)); @@ -308,16 +309,18 @@ static int register_device(int minor, struct pp_struct *pp) ppdev_cb.private = pp; pdev = parport_register_dev_model(port, name, &ppdev_cb, minor); parport_put_port(port); - kfree(name); if (!pdev) { pr_warn("%s: failed to register device!\n", name); - return -ENXIO; + rc = -ENXIO; + goto err; } pp->pdev = pdev; dev_dbg(&pdev->dev, "registered pardevice\n"); - return 0; +err: + kfree(name); + return rc; } static enum ieee1284_phase init_phase(int mode) From 802c03881f29844af0252b6e22be5d2f65f93fd0 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 6 Jan 2017 02:14:16 +0900 Subject: [PATCH 305/645] sysrq: attach sysrq handler correctly for 32-bit kernel The sysrq input handler should be attached to the input device which has a left alt key. On 32-bit kernels, some input devices which has a left alt key cannot attach sysrq handler. Because the keybit bitmap in struct input_device_id for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is greater than BITS_PER_LONG on 32-bit kernels. I found this problem when using a matrix keypad device which defines a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32). Cc: Jiri Slaby Signed-off-by: Akinobu Mita Acked-by: Dmitry Torokhov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/sysrq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 52bbd27e93ae..701c085bb19b 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -946,8 +946,8 @@ static const struct input_device_id sysrq_ids[] = { { .flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT, - .evbit = { BIT_MASK(EV_KEY) }, - .keybit = { BIT_MASK(KEY_LEFTALT) }, + .evbit = { [BIT_WORD(EV_KEY)] = BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(KEY_LEFTALT)] = BIT_MASK(KEY_LEFTALT) }, }, { }, }; From 546cf3ef9c92b76ff0037c871b939e63caea98b3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 26 Dec 2016 09:58:34 -0800 Subject: [PATCH 306/645] auxdisplay: fix new ht16k33 build errors Fix build errors caused by selecting incorrect kconfig symbols. drivers/built-in.o:(.data+0x19cec): undefined reference to `sys_fillrect' drivers/built-in.o:(.data+0x19cf0): undefined reference to `sys_copyarea' drivers/built-in.o:(.data+0x19cf4): undefined reference to `sys_imageblit' Fixes: 31114fa95bdb (auxdisplay: ht16k33: select framebuffer helper modules) Signed-off-by: Randy Dunlap Cc: Miguel Ojeda Sandonis Reported-by: kbuild test robot Acked-by: Robin van der Gracht Signed-off-by: Greg Kroah-Hartman --- drivers/auxdisplay/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 4ef4c5caed4f..8a8e403644d6 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -132,9 +132,9 @@ config HT16K33 tristate "Holtek Ht16K33 LED controller with keyscan" depends on FB && OF && I2C && INPUT select FB_SYS_FOPS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT select INPUT_MATRIXKMAP select FB_BACKLIGHT help From 3546fb0cdac25a79c89d87020566fab52b92867d Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 12 Dec 2016 16:15:17 +0100 Subject: [PATCH 307/645] drm/etnaviv: trick drm_mm into giving out a low IOVA After rollover of the IOVA space, we want to get a low IOVA address, otherwise the the games we play by remembering the last IOVA are pointless. When we search for a free hole with DRM_MM_SEARCH_DEFAULT, drm_mm will pop the next entry from the free holes stack, which will likely be a high IOVA. By using DRM_MM_SEARCH_BELOW we can trick drm_mm into reversing the search and provide us with a low IOVA. Signed-off-by: Lucas Stach Reviewed-by: Wladimir van der Laan --- drivers/gpu/drm/etnaviv/etnaviv_mmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_mmu.c b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c index 169ac96e8f08..fe0e85b41310 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_mmu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_mmu.c @@ -116,9 +116,14 @@ static int etnaviv_iommu_find_iova(struct etnaviv_iommu *mmu, struct list_head list; bool found; + /* + * XXX: The DRM_MM_SEARCH_BELOW is really a hack to trick + * drm_mm into giving out a low IOVA after address space + * rollover. This needs a proper fix. + */ ret = drm_mm_insert_node_in_range(&mmu->mm, node, size, 0, mmu->last_iova, ~0UL, - DRM_MM_SEARCH_DEFAULT); + mmu->last_iova ? DRM_MM_SEARCH_DEFAULT : DRM_MM_SEARCH_BELOW); if (ret != -ENOSPC) break; From 24b91e360ef521a2808771633d76ebc68bd5604b Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 4 Jan 2017 15:12:04 +0100 Subject: [PATCH 308/645] nohz: Fix collision between tick and other hrtimers When the tick is stopped and an interrupt occurs afterward, we check on that interrupt exit if the next tick needs to be rescheduled. If it doesn't need any update, we don't want to do anything. In order to check if the tick needs an update, we compare it against the clockevent device deadline. Now that's a problem because the clockevent device is at a lower level than the tick itself if it is implemented on top of hrtimer. Every hrtimer share this clockevent device. So comparing the next tick deadline against the clockevent device deadline is wrong because the device may be programmed for another hrtimer whose deadline collides with the tick. As a result we may end up not reprogramming the tick accidentally. In a worst case scenario under full dynticks mode, the tick stops firing as it is supposed to every 1hz, leaving /proc/stat stalled: Task in a full dynticks CPU ---------------------------- * hrtimer A is queued 2 seconds ahead * the tick is stopped, scheduled 1 second ahead * tick fires 1 second later * on tick exit, nohz schedules the tick 1 second ahead but sees the clockevent device is already programmed to that deadline, fooled by hrtimer A, the tick isn't rescheduled. * hrtimer A is cancelled before its deadline * tick never fires again until an interrupt happens... In order to fix this, store the next tick deadline to the tick_sched local structure and reuse that value later to check whether we need to reprogram the clock after an interrupt. On the other hand, ts->sleep_length still wants to know about the next clock event and not just the tick, so we want to improve the related comment to avoid confusion. Reported-by: James Hartsock Signed-off-by: Frederic Weisbecker Reviewed-by: Wanpeng Li Acked-by: Peter Zijlstra Acked-by: Rik van Riel Link: http://lkml.kernel.org/r/1483539124-5693-1-git-send-email-fweisbec@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 9 +++++++-- kernel/time/tick-sched.h | 2 ++ 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 2c115fdab397..74e0388cc88d 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -767,7 +767,7 @@ static ktime_t tick_nohz_stop_sched_tick(struct tick_sched *ts, tick = expires; /* Skip reprogram of event if its not changed */ - if (ts->tick_stopped && (expires == dev->next_event)) + if (ts->tick_stopped && (expires == ts->next_tick)) goto out; /* @@ -787,6 +787,8 @@ static ktime_t tick_nohz_stop_sched_tick(struct tick_sched *ts, trace_tick_stop(1, TICK_DEP_MASK_NONE); } + ts->next_tick = tick; + /* * If the expiration time == KTIME_MAX, then we simply stop * the tick timer. @@ -802,7 +804,10 @@ static ktime_t tick_nohz_stop_sched_tick(struct tick_sched *ts, else tick_program_event(tick, 1); out: - /* Update the estimated sleep length */ + /* + * Update the estimated sleep length until the next timer + * (not only the tick). + */ ts->sleep_length = ktime_sub(dev->next_event, now); return tick; } diff --git a/kernel/time/tick-sched.h b/kernel/time/tick-sched.h index bf38226e5c17..075444e3d48e 100644 --- a/kernel/time/tick-sched.h +++ b/kernel/time/tick-sched.h @@ -27,6 +27,7 @@ enum tick_nohz_mode { * timer is modified for nohz sleeps. This is necessary * to resume the tick timer operation in the timeline * when the CPU returns from nohz sleep. + * @next_tick: Next tick to be fired when in dynticks mode. * @tick_stopped: Indicator that the idle tick has been stopped * @idle_jiffies: jiffies at the entry to idle for idle time accounting * @idle_calls: Total number of idle calls @@ -44,6 +45,7 @@ struct tick_sched { unsigned long check_clocks; enum tick_nohz_mode nohz_mode; ktime_t last_tick; + ktime_t next_tick; int inidle; int tick_stopped; unsigned long idle_jiffies; From c8a6a09c1c617402cc9254b2bc8da359a0347d75 Mon Sep 17 00:00:00 2001 From: Augusto Mecking Caringi Date: Tue, 10 Jan 2017 10:45:00 +0000 Subject: [PATCH 309/645] vme: Fix wrong pointer utilization in ca91cx42_slave_get MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In ca91cx42_slave_get function, the value pointed by vme_base pointer is set through: *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); So it must be dereferenced to be used in calculation of pci_base: *pci_base = (dma_addr_t)*vme_base + pci_offset; This bug was caught thanks to the following gcc warning: drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’: drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] *pci_base = (dma_addr_t)vme_base + pci_offset; Signed-off-by: Augusto Mecking Caringi Acked-By: Martyn Welch Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/vme/bridges/vme_ca91cx42.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c index 6b5ee896af63..7cc51223db1c 100644 --- a/drivers/vme/bridges/vme_ca91cx42.c +++ b/drivers/vme/bridges/vme_ca91cx42.c @@ -464,7 +464,7 @@ static int ca91cx42_slave_get(struct vme_slave_resource *image, int *enabled, vme_bound = ioread32(bridge->base + CA91CX42_VSI_BD[i]); pci_offset = ioread32(bridge->base + CA91CX42_VSI_TO[i]); - *pci_base = (dma_addr_t)vme_base + pci_offset; + *pci_base = (dma_addr_t)*vme_base + pci_offset; *size = (unsigned long long)((vme_bound - *vme_base) + granularity); *enabled = 0; From 69d012345a1a32d3f03957f14d972efccc106a98 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 11 Jan 2017 14:02:00 +0800 Subject: [PATCH 310/645] arm64: hugetlb: fix the wrong return value for huge_ptep_set_access_flags In current code, the @changed always returns the last one's status for the huge page with the contiguous bit set. This is really not what we want. Even one of the PTEs is changed, we should tell it to the caller. This patch fixes this issue. Fixes: 66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit") Cc: # 4.5.x- Signed-off-by: Huang Shijie Signed-off-by: Catalin Marinas --- arch/arm64/mm/hugetlbpage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index 964b7549af5c..e25584d72396 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -239,7 +239,7 @@ int huge_ptep_set_access_flags(struct vm_area_struct *vma, ncontig = find_num_contig(vma->vm_mm, addr, cpte, *cpte, &pgsize); for (i = 0; i < ncontig; ++i, ++cpte, addr += pgsize) { - changed = ptep_set_access_flags(vma, addr, cpte, + changed |= ptep_set_access_flags(vma, addr, cpte, pfn_pte(pfn, hugeprot), dirty); From 2d5a9c72d0c4ac73cf97f4b7814ed6c44b1e49ae Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 6 Jan 2017 19:15:18 +0100 Subject: [PATCH 311/645] USB: serial: ch341: fix control-message error handling A short control transfer would currently fail to be detected, something which could lead to stale buffer data being used as valid input. Check for short transfers, and make sure to log any transfer errors. Note that this also avoids leaking heap data to user space (TIOCMGET) and the remote device (break control). Fixes: 6ce76104781a ("USB: Driver for CH341 USB-serial adaptor") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ch341.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 8d7b0847109b..95aa5233726c 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -113,6 +113,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request, r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, value, index, NULL, 0, DEFAULT_TIMEOUT); + if (r < 0) + dev_err(&dev->dev, "failed to send control message: %d\n", r); return r; } @@ -130,7 +132,20 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - return r; + if (r < bufsize) { + if (r >= 0) { + dev_err(&dev->dev, + "short control message received (%d < %u)\n", + r, bufsize); + r = -EIO; + } + + dev_err(&dev->dev, "failed to receive control message: %d\n", + r); + return r; + } + + return 0; } static int ch341_set_baudrate_lcr(struct usb_device *dev, @@ -181,9 +196,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control) static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; unsigned long flags; buffer = kmalloc(size, GFP_KERNEL); @@ -194,14 +209,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - /* setup the private status if available */ - if (r == 2) { - r = 0; - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; - spin_unlock_irqrestore(&priv->lock, flags); - } else - r = -EPROTO; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + spin_unlock_irqrestore(&priv->lock, flags); out: kfree(buffer); return r; @@ -211,9 +221,9 @@ out: kfree(buffer); static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; buffer = kmalloc(size, GFP_KERNEL); if (!buffer) From 6d6daa20945f3f598e56e18d1f926c08754f5801 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 5 Jan 2017 10:09:25 -0500 Subject: [PATCH 312/645] perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code hswep_uncore_cpu_init() uses a hardcoded physical package id 0 for the boot cpu. This works as long as the boot CPU is actually on the physical package 0, which is normaly the case after power on / reboot. But it fails with a NULL pointer dereference when a kdump kernel is started on a secondary socket which has a different physical package id because the locigal package translation for physical package 0 does not exist. Use the logical package id of the boot cpu instead of hard coded 0. [ tglx: Rewrote changelog once more ] Fixes: cf6d445f6897 ("perf/x86/uncore: Track packages, not per CPU data") Signed-off-by: Prarit Bhargava Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Harish Chegondi Cc: Jiri Olsa Cc: Kan Liang Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1483628965-2890-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/events/intel/uncore_snbep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c index e6832be714bc..dae2fedc1601 100644 --- a/arch/x86/events/intel/uncore_snbep.c +++ b/arch/x86/events/intel/uncore_snbep.c @@ -2686,7 +2686,7 @@ static struct intel_uncore_type *hswep_msr_uncores[] = { void hswep_uncore_cpu_init(void) { - int pkg = topology_phys_to_logical_pkg(0); + int pkg = boot_cpu_data.logical_proc_id; if (hswep_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores) hswep_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores; From ecc8995363ee6231b32dad61c955b371b79cc4cf Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 10 Jan 2017 17:31:56 +0300 Subject: [PATCH 313/645] pinctrl: broxton: Use correct PADCFGLOCK offset PADCFGLOCK (and PADCFGLOCK_TX) offset in Broxton actually starts at 0x060 and not 0x090 as used in the driver. Fix it to use the correct offset. Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-broxton.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/intel/pinctrl-broxton.c b/drivers/pinctrl/intel/pinctrl-broxton.c index 59cb7a6fc5be..901b356b09d7 100644 --- a/drivers/pinctrl/intel/pinctrl-broxton.c +++ b/drivers/pinctrl/intel/pinctrl-broxton.c @@ -19,7 +19,7 @@ #define BXT_PAD_OWN 0x020 #define BXT_HOSTSW_OWN 0x080 -#define BXT_PADCFGLOCK 0x090 +#define BXT_PADCFGLOCK 0x060 #define BXT_GPI_IE 0x110 #define BXT_COMMUNITY(s, e) \ From 17fab473693e8357a9aa6fee4fbed6c13a34bd81 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 2 Jan 2017 14:07:22 +0200 Subject: [PATCH 314/645] pinctrl: intel: Set pin direction properly There are two bits in the PADCFG0 register to configure direction, one per TX/RX buffers. For now we wrongly assume that the GPIO is always requested before it is being used, which is not true when the GPIO is used through irqchip. In this case the GPIO is never requested and we never enable RX buffer for it. Fix this by setting both bits accordingly. Reported-by: Jarkko Nikula Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-intel.c | 30 +++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 1e139672f1af..6df35dcb29ae 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -353,6 +353,21 @@ static int intel_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned function, return 0; } +static void __intel_gpio_set_direction(void __iomem *padcfg0, bool input) +{ + u32 value; + + value = readl(padcfg0); + if (input) { + value &= ~PADCFG0_GPIORXDIS; + value |= PADCFG0_GPIOTXDIS; + } else { + value &= ~PADCFG0_GPIOTXDIS; + value |= PADCFG0_GPIORXDIS; + } + writel(value, padcfg0); +} + static int intel_gpio_request_enable(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned pin) @@ -375,11 +390,11 @@ static int intel_gpio_request_enable(struct pinctrl_dev *pctldev, /* Disable SCI/SMI/NMI generation */ value &= ~(PADCFG0_GPIROUTIOXAPIC | PADCFG0_GPIROUTSCI); value &= ~(PADCFG0_GPIROUTSMI | PADCFG0_GPIROUTNMI); - /* Disable TX buffer and enable RX (this will be input) */ - value &= ~PADCFG0_GPIORXDIS; - value |= PADCFG0_GPIOTXDIS; writel(value, padcfg0); + /* Disable TX buffer and enable RX (this will be input) */ + __intel_gpio_set_direction(padcfg0, true); + raw_spin_unlock_irqrestore(&pctrl->lock, flags); return 0; @@ -392,18 +407,11 @@ static int intel_gpio_set_direction(struct pinctrl_dev *pctldev, struct intel_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); void __iomem *padcfg0; unsigned long flags; - u32 value; raw_spin_lock_irqsave(&pctrl->lock, flags); padcfg0 = intel_get_padcfg(pctrl, pin, PADCFG0); - - value = readl(padcfg0); - if (input) - value |= PADCFG0_GPIOTXDIS; - else - value &= ~PADCFG0_GPIOTXDIS; - writel(value, padcfg0); + __intel_gpio_set_direction(padcfg0, input); raw_spin_unlock_irqrestore(&pctrl->lock, flags); From 04ff5a095d662e0879f0eb04b9247e092210aeff Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 10 Jan 2017 16:38:52 +0200 Subject: [PATCH 315/645] pinctrl: baytrail: Rectify debounce support The commit 658b476c742f ("pinctrl: baytrail: Add debounce configuration") implements debounce for Baytrail pin control, but seems wasn't tested properly. The register which keeps debounce value is separated from the configuration one. Writing wrong values to the latter will guarantee wrong behaviour of the driver and even might break something physically. Besides above there is missed case how to disable it, which is actually done through the bit in configuration register. Rectify implementation here by using proper register for debounce value. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-baytrail.c | 28 ++++++++++++++---------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index 37300634b7d2..67e92699b84e 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -1092,6 +1092,7 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset, enum pin_config_param param = pinconf_to_config_param(*config); void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); + void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG); unsigned long flags; u32 conf, pull, val, debounce; u16 arg = 0; @@ -1128,7 +1129,7 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset, return -EINVAL; raw_spin_lock_irqsave(&vg->lock, flags); - debounce = readl(byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG)); + debounce = readl(db_reg); raw_spin_unlock_irqrestore(&vg->lock, flags); switch (debounce & BYT_DEBOUNCE_PULSE_MASK) { @@ -1176,6 +1177,7 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev, unsigned int param, arg; void __iomem *conf_reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG); void __iomem *val_reg = byt_gpio_reg(vg, offset, BYT_VAL_REG); + void __iomem *db_reg = byt_gpio_reg(vg, offset, BYT_DEBOUNCE_REG); unsigned long flags; u32 conf, val, debounce; int i, ret = 0; @@ -1238,36 +1240,40 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev, break; case PIN_CONFIG_INPUT_DEBOUNCE: - debounce = readl(byt_gpio_reg(vg, offset, - BYT_DEBOUNCE_REG)); - conf &= ~BYT_DEBOUNCE_PULSE_MASK; + debounce = readl(db_reg); + debounce &= ~BYT_DEBOUNCE_PULSE_MASK; switch (arg) { + case 0: + conf &= BYT_DEBOUNCE_EN; + break; case 375: - conf |= BYT_DEBOUNCE_PULSE_375US; + debounce |= BYT_DEBOUNCE_PULSE_375US; break; case 750: - conf |= BYT_DEBOUNCE_PULSE_750US; + debounce |= BYT_DEBOUNCE_PULSE_750US; break; case 1500: - conf |= BYT_DEBOUNCE_PULSE_1500US; + debounce |= BYT_DEBOUNCE_PULSE_1500US; break; case 3000: - conf |= BYT_DEBOUNCE_PULSE_3MS; + debounce |= BYT_DEBOUNCE_PULSE_3MS; break; case 6000: - conf |= BYT_DEBOUNCE_PULSE_6MS; + debounce |= BYT_DEBOUNCE_PULSE_6MS; break; case 12000: - conf |= BYT_DEBOUNCE_PULSE_12MS; + debounce |= BYT_DEBOUNCE_PULSE_12MS; break; case 24000: - conf |= BYT_DEBOUNCE_PULSE_24MS; + debounce |= BYT_DEBOUNCE_PULSE_24MS; break; default: ret = -EINVAL; } + if (!ret) + writel(debounce, db_reg); break; default: ret = -ENOTSUPP; From 7cfd5fd5a9813f1430290d20c0fead9b4582a307 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 10 Jan 2017 19:52:43 -0800 Subject: [PATCH 316/645] gro: use min_t() in skb_gro_reset_offset() On 32bit arches, (skb->end - skb->data) is not 'unsigned int', so we shall use min_t() instead of min() to avoid a compiler error. Fixes: 1272ce87fa01 ("gro: Enter slow-path if there is no tailroom") Reported-by: kernel test robot Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 88d2907ca2cd..07b307b0b414 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4441,8 +4441,9 @@ static void skb_gro_reset_offset(struct sk_buff *skb) pinfo->nr_frags && !PageHighMem(skb_frag_page(frag0))) { NAPI_GRO_CB(skb)->frag0 = skb_frag_address(frag0); - NAPI_GRO_CB(skb)->frag0_len = min(skb_frag_size(frag0), - skb->end - skb->tail); + NAPI_GRO_CB(skb)->frag0_len = min_t(unsigned int, + skb_frag_size(frag0), + skb->end - skb->tail); } } From 73b351473547e543e9c8166dd67fd99c64c15b0b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 10 Jan 2017 13:08:06 +0100 Subject: [PATCH 317/645] cgroup: move CONFIG_SOCK_CGROUP_DATA to init/Kconfig We now 'select SOCK_CGROUP_DATA' but Kconfig complains that this is not right when CONFIG_NET is disabled and there is no socket interface: warning: (CGROUP_BPF) selects SOCK_CGROUP_DATA which has unmet direct dependencies (NET) I don't know what the correct solution for this is, but simply removing the dependency on NET from SOCK_CGROUP_DATA by moving it out of the 'if NET' section avoids the warning and does not produce other build errors. Fixes: 483c4933ea09 ("cgroup: Fix CGROUP_BPF config") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- init/Kconfig | 4 ++++ net/Kconfig | 4 ---- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 223b734abccd..e1a937348a3e 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1176,6 +1176,10 @@ config CGROUP_DEBUG Say N. +config SOCK_CGROUP_DATA + bool + default n + endif # CGROUPS config CHECKPOINT_RESTORE diff --git a/net/Kconfig b/net/Kconfig index a1005007224c..a29bb4b41c50 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -258,10 +258,6 @@ config XPS config HWBM bool -config SOCK_CGROUP_DATA - bool - default n - config CGROUP_NET_PRIO bool "Network priority cgroup" depends on CGROUPS From 7a18c5b9fb31a999afc62b0e60978aa896fc89e9 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 10 Jan 2017 14:37:35 -0800 Subject: [PATCH 318/645] net: ipv4: Fix multipath selection with vrf fib_select_path does not call fib_select_multipath if oif is set in the flow struct. For VRF use cases oif is always set, so multipath route selection is bypassed. Use the FLOWI_FLAG_SKIP_NH_OIF to skip the oif check similar to what is done in fib_table_lookup. Add saddr and proto to the flow struct for the fib lookup done by the VRF driver to better match hash computation for a flow. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 2 ++ net/ipv4/fib_semantics.c | 9 +++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 23dfb0eac098..0a067708aa39 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -263,7 +263,9 @@ static netdev_tx_t vrf_process_v4_outbound(struct sk_buff *skb, .flowi4_iif = LOOPBACK_IFINDEX, .flowi4_tos = RT_TOS(ip4h->tos), .flowi4_flags = FLOWI_FLAG_ANYSRC | FLOWI_FLAG_SKIP_NH_OIF, + .flowi4_proto = ip4h->protocol, .daddr = ip4h->daddr, + .saddr = ip4h->saddr, }; struct net *net = dev_net(vrf_dev); struct rtable *rt; diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 7a5b4c7d9a87..eba1546b5031 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1618,8 +1618,13 @@ void fib_select_multipath(struct fib_result *res, int hash) void fib_select_path(struct net *net, struct fib_result *res, struct flowi4 *fl4, int mp_hash) { + bool oif_check; + + oif_check = (fl4->flowi4_oif == 0 || + fl4->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF); + #ifdef CONFIG_IP_ROUTE_MULTIPATH - if (res->fi->fib_nhs > 1 && fl4->flowi4_oif == 0) { + if (res->fi->fib_nhs > 1 && oif_check) { if (mp_hash < 0) mp_hash = get_hash_from_flowi4(fl4) >> 1; @@ -1629,7 +1634,7 @@ void fib_select_path(struct net *net, struct fib_result *res, #endif if (!res->prefixlen && res->table->tb_num_default > 1 && - res->type == RTN_UNICAST && !fl4->flowi4_oif) + res->type == RTN_UNICAST && oif_check) fib_select_default(fl4, res); if (!fl4->saddr) From eb004603c857f3e3bfcda437b6c68fd258c54960 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 10 Jan 2017 22:53:06 +0000 Subject: [PATCH 319/645] sctp: Fix spelling mistake: "Atempt" -> "Attempt" Trivial fix to spelling mistake in WARN_ONCE message Signed-off-by: Colin Ian King Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/outqueue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index e54082699520..34efaa4ef2f6 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -1048,7 +1048,7 @@ static void sctp_outq_flush(struct sctp_outq *q, int rtx_timeout, gfp_t gfp) (new_transport->state == SCTP_PF))) new_transport = asoc->peer.active_path; if (new_transport->state == SCTP_UNCONFIRMED) { - WARN_ONCE(1, "Atempt to send packet on unconfirmed path."); + WARN_ONCE(1, "Attempt to send packet on unconfirmed path."); sctp_chunk_fail(chunk, 0); sctp_chunk_free(chunk); continue; From a13c06525ab9ff442924e67df9393a5efa914c56 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 10 Jan 2017 23:13:45 +0000 Subject: [PATCH 320/645] net: phy: marvell: fix Marvell 88E1512 used in SGMII mode When an Marvell 88E1512 PHY is connected to a nic in SGMII mode, the fiber page is used for the SGMII host-side connection. The PHY driver notices that SUPPORTED_FIBRE is set, so it tries reading the fiber page for the link status, and ends up reading the MAC-side status instead of the outgoing (copper) link. This leads to incorrect results reported via ethtool. If the PHY is connected via SGMII to the host, ignore the fiber page. However, continue to allow the existing power management code to suspend and resume the fiber page. Fixes: 6cfb3bcc0641 ("Marvell phy: check link status in case of fiber link.") Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index e269262471a4..0b78210c0fa7 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -1192,7 +1192,8 @@ static int marvell_read_status(struct phy_device *phydev) int err; /* Check the fiber mode first */ - if (phydev->supported & SUPPORTED_FIBRE) { + if (phydev->supported & SUPPORTED_FIBRE && + phydev->interface != PHY_INTERFACE_MODE_SGMII) { err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER); if (err < 0) goto error; From 24c63bbc18e25d5d8439422aa5fd2d66390b88eb Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 10 Jan 2017 15:22:25 -0800 Subject: [PATCH 321/645] net: vrf: do not allow table id 0 Frank reported that vrf devices can be created with a table id of 0. This breaks many of the run time table id checks and should not be allowed. Detect this condition at create time and fail with EINVAL. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Frank Kellermann Signed-off-by: David Ahern Signed-off-by: David S. Miller --- drivers/net/vrf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 0a067708aa39..454f907d419a 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -1252,6 +1252,8 @@ static int vrf_newlink(struct net *src_net, struct net_device *dev, return -EINVAL; vrf->tb_id = nla_get_u32(data[IFLA_VRF_TABLE]); + if (vrf->tb_id == RT_TABLE_UNSPEC) + return -EINVAL; dev->priv_flags |= IFF_L3MDEV_MASTER; From c38c39bf7cc04d688291f382469e84ec2a8548a4 Mon Sep 17 00:00:00 2001 From: Cedric Izoard Date: Wed, 11 Jan 2017 14:39:07 +0000 Subject: [PATCH 322/645] mac80211: Fix headroom allocation when forwarding mesh pkt This patch fix issue introduced by my previous commit that tried to ensure enough headroom was present, and instead broke it. When forwarding mesh pkt, mac80211 may also add security header, and it must therefore be taken into account in the needed headroom. Fixes: d8da0b5d64d5 ("mac80211: Ensure enough headroom when forwarding mesh pkt") Signed-off-by: Cedric Izoard Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c037c5bb6167..c87e61358b77 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2472,7 +2472,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) if (!ifmsh->mshcfg.dot11MeshForwarding) goto out; - fwd_skb = skb_copy_expand(skb, local->tx_headroom, 0, GFP_ATOMIC); + fwd_skb = skb_copy_expand(skb, local->tx_headroom + + sdata->encrypt_headroom, 0, GFP_ATOMIC); if (!fwd_skb) { net_info_ratelimited("%s: failed to clone mesh frame\n", sdata->name); From 89e9f7bcd8744ea25fcf0ac671b8d72c10d7d790 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 28 Dec 2016 14:55:16 -0600 Subject: [PATCH 323/645] x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F Martin reported that the Supermicro X8DTH-i/6/iF/6F advertises incorrect host bridge windows via _CRS: pci_root PNP0A08:00: host bridge window [io 0xf000-0xffff] pci_root PNP0A08:01: host bridge window [io 0xf000-0xffff] Both bridges advertise the 0xf000-0xffff window, which cannot be correct. Work around this by ignoring _CRS on this system. The downside is that we may not assign resources correctly to hot-added PCI devices (if they are possible on this system). Link: https://bugzilla.kernel.org/show_bug.cgi?id=42606 Reported-by: Martin Burnicki Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org --- arch/x86/pci/acpi.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 3cd69832d7f4..3961103e9176 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -114,6 +114,16 @@ static const struct dmi_system_id pci_crs_quirks[] __initconst = { DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"), }, }, + /* https://bugzilla.kernel.org/show_bug.cgi?id=42606 */ + { + .callback = set_nouse_crs, + .ident = "Supermicro X8DTH", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), + DMI_MATCH(DMI_PRODUCT_NAME, "X8DTH-i/6/iF/6F"), + DMI_MATCH(DMI_BIOS_VERSION, "2.0a"), + }, + }, /* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */ { From 51ebfc92b72b4f7dac1ab45683bf56741e454b8c Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 11 Jan 2017 09:11:53 -0600 Subject: [PATCH 324/645] PCI: Enumerate switches below PCI-to-PCIe bridges A PCI-to-PCIe bridge (a "reverse bridge") has a PCI or PCI-X primary interface and a PCI Express secondary interface. The PCIe interface is a Downstream Port that originates a Link. See the "PCI Express to PCI/PCI-X Bridge Specification", rev 1.0, sections 1.2 and A.6. The bug report below involves a PCI-to-PCIe bridge and a PCIe switch below the bridge: 00:1e.0 Intel 82801 PCI Bridge to [bus 01-0a] 01:00.0 Pericom PI7C9X111SL PCIe-to-PCI Reversible Bridge to [bus 02-0a] 02:00.0 Pericom Device 8608 [PCIe Upstream Port] to [bus 03-0a] 03:01.0 Pericom Device 8608 [PCIe Downstream Port] to [bus 0a] 01:00.0 is configured as a PCI-to-PCIe bridge (despite the name printed by lspci). As we traverse a PCIe hierarchy, device connections alternate between PCIe Links and internal Switch logic. Previously we did not recognize that 01:00.0 had a secondary link, so we thought the 02:00.0 Upstream Port *did* have a secondary link. In fact, it's the other way around: 01:00.0 has a secondary link, and 02:00.0 has internal Switch logic on its secondary side. When we thought 02:00.0 had a secondary link, the pci_scan_slot() -> only_one_child() path assumed 02:00.0 could have only one child, so 03:00.0 was the only possible downstream device. But 03:00.0 doesn't exist, so we didn't look for any other devices on bus 03. Booting with "pci=pcie_scan_all" is a workaround, but we don't want users to have to do that. Recognize that PCI-to-PCIe bridges originate links on their secondary interfaces. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189361 Fixes: d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") Tested-by: Blake Moore Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v4.2+ --- drivers/pci/probe.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e164b5c9f0f0..204960e70333 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1169,6 +1169,7 @@ void set_pcie_port_type(struct pci_dev *pdev) pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (!pos) return; + pdev->pcie_cap = pos; pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); pdev->pcie_flags_reg = reg16; @@ -1176,13 +1177,14 @@ void set_pcie_port_type(struct pci_dev *pdev) pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; /* - * A Root Port is always the upstream end of a Link. No PCIe - * component has two Links. Two Links are connected by a Switch - * that has a Port on each Link and internal logic to connect the - * two Ports. + * A Root Port or a PCI-to-PCIe bridge is always the upstream end + * of a Link. No PCIe component has two Links. Two Links are + * connected by a Switch that has a Port on each Link and internal + * logic to connect the two Ports. */ type = pci_pcie_type(pdev); - if (type == PCI_EXP_TYPE_ROOT_PORT) + if (type == PCI_EXP_TYPE_ROOT_PORT || + type == PCI_EXP_TYPE_PCIE_BRIDGE) pdev->has_secondary_link = 1; else if (type == PCI_EXP_TYPE_UPSTREAM || type == PCI_EXP_TYPE_DOWNSTREAM) { From d7f842442f766db3f39fc5d166ddcc24bf817056 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 25 Oct 2016 10:32:16 +0300 Subject: [PATCH 325/645] mac80211: fix the TID on NDPs sent as EOSP carrier In the commit below, I forgot to translate the mac80211's AC to QoS IE order. Moreover, the condition in the if was wrong. Fix both issues. This bug would hit only with clients that didn't set all the ACs as delivery enabled. Fixes: f438ceb81d4 ("mac80211: uapsd_queues is in QoS IE order") Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index b6cfcf038c11..50c309094c37 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1501,8 +1501,8 @@ ieee80211_sta_ps_deliver_response(struct sta_info *sta, /* This will evaluate to 1, 3, 5 or 7. */ for (ac = IEEE80211_AC_VO; ac < IEEE80211_NUM_ACS; ac++) - if (ignored_acs & BIT(ac)) - continue; + if (!(ignored_acs & ieee80211_ac_to_qos_mask[ac])) + break; tid = 7 - 2 * ac; ieee80211_send_null_response(sta, tid, reason, true, false); From 06f7c88c107fb469f4f1344142e80df5175c6836 Mon Sep 17 00:00:00 2001 From: Beni Lev Date: Tue, 19 Jul 2016 19:28:56 +0300 Subject: [PATCH 326/645] cfg80211: consider VHT opmode on station update Currently, this attribute is only fetched on station addition, but not on station change. Since this info is only present in the assoc request, with full station state support in the driver it cannot be present when the station is added. Thus, add support for changing the VHT opmode on station update if done before (or while) the station is marked as associated. After this, ignore it, since it used to be ignored. Signed-off-by: Beni Lev Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 4 +++- net/wireless/nl80211.c | 15 +++++++++++++++ 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6b76e3b0c18e..bea982af9cfb 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1772,7 +1772,9 @@ enum nl80211_commands { * * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode * Notification Element based on association request when used with - * %NL80211_CMD_NEW_STATION; u8 attribute. + * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when + * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); + * u8 attribute. * * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ef5eff93a8b8..5c1b267e22be 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4615,6 +4615,15 @@ int cfg80211_check_station_change(struct wiphy *wiphy, break; } + /* + * Older kernel versions ignored this attribute entirely, so don't + * reject attempts to update it but mark it as unused instead so the + * driver won't look at the data. + */ + if (statype != CFG80211_STA_AP_CLIENT_UNASSOC && + statype != CFG80211_STA_TDLS_PEER_SETUP) + params->opmode_notif_used = false; + return 0; } EXPORT_SYMBOL(cfg80211_check_station_change); @@ -4854,6 +4863,12 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) params.local_pm = pm; } + if (info->attrs[NL80211_ATTR_OPMODE_NOTIF]) { + params.opmode_notif_used = true; + params.opmode_notif = + nla_get_u8(info->attrs[NL80211_ATTR_OPMODE_NOTIF]); + } + /* Include parameters for TDLS peer (will check later) */ err = nl80211_set_station_tdls(info, ¶ms); if (err) From 96aa2e7cf126773b16c6c19b7474a8a38d3c707e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 7 Oct 2016 12:23:49 +0200 Subject: [PATCH 327/645] mac80211: calculate min channel width correctly In the current minimum chandef code there's an issue in that the recalculation can happen after rate control is initialized for a station that has a wider bandwidth than the current chanctx, and then rate control can immediately start using those higher rates which could cause problems. Observe that first of all that this problem is because we don't take non-associated and non-uploaded stations into account. The restriction to non-associated is quite pointless and is one of the causes for the problem described above, since the rate init will happen before the station is set to associated; no frames could actually be sent until associated, but the rate table can already contain higher rates and that might cause problems. Also, rejecting non-uploaded stations is wrong, since the rate control can select higher rates for those as well. Secondly, it's then necessary to recalculate the minimal config before initializing rate control, so that when rate control is initialized, the higher rates are already available. This can be done easily by adding the necessary function call in rate init. Change-Id: Ib9bc02d34797078db55459d196993f39dcd43070 Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 3 --- net/mac80211/rate.c | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index e75cbf6ecc26..a0d901d8992e 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -231,9 +231,6 @@ ieee80211_get_max_required_bw(struct ieee80211_sub_if_data *sdata) !(sta->sdata->bss && sta->sdata->bss == sdata->bss)) continue; - if (!sta->uploaded || !test_sta_flag(sta, WLAN_STA_ASSOC)) - continue; - max_bw = max(max_bw, ieee80211_get_sta_bw(&sta->sta)); } rcu_read_unlock(); diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 206698bc93f4..9e2641d45587 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -40,6 +40,8 @@ void rate_control_rate_init(struct sta_info *sta) ieee80211_sta_set_rx_nss(sta); + ieee80211_recalc_min_chandef(sta->sdata); + if (!ref) return; From d2941df8fbd9708035d66d889ada4d3d160170ce Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 20 Oct 2016 08:52:50 +0200 Subject: [PATCH 328/645] mac80211: recalculate min channel width on VHT opmode changes When an associated station changes its VHT operating mode this can/will affect the bandwidth it's using, and consequently we must recalculate the minimum bandwidth we need to use. Failure to do so can lead to one of two scenarios: 1) we use a too high bandwidth, this is benign 2) we use a too narrow bandwidth, causing rate control and actual PHY configuration to be out of sync, which can in turn cause problems/crashes Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 21 +++++++++++++++++++++ net/mac80211/rx.c | 9 +-------- net/mac80211/vht.c | 4 +++- 3 files changed, 25 insertions(+), 9 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 41497b670e2b..d37ae7dc114b 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -6,6 +6,7 @@ * Copyright (c) 2006 Jiri Benc * Copyright 2008, Johannes Berg * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright (c) 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -1295,6 +1296,26 @@ static void ieee80211_iface_work(struct work_struct *work) } else if (ieee80211_is_action(mgmt->frame_control) && mgmt->u.action.category == WLAN_CATEGORY_VHT) { switch (mgmt->u.action.u.vht_group_notif.action_code) { + case WLAN_VHT_ACTION_OPMODE_NOTIF: { + struct ieee80211_rx_status *status; + enum nl80211_band band; + u8 opmode; + + status = IEEE80211_SKB_RXCB(skb); + band = status->band; + opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; + + mutex_lock(&local->sta_mtx); + sta = sta_info_get_bss(sdata, mgmt->sa); + + if (sta) + ieee80211_vht_handle_opmode(sdata, sta, + opmode, + band); + + mutex_unlock(&local->sta_mtx); + break; + } case WLAN_VHT_ACTION_GROUPID_MGMT: ieee80211_process_mu_groups(sdata, mgmt); break; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c87e61358b77..3090dd4342f6 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2881,17 +2881,10 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) switch (mgmt->u.action.u.vht_opmode_notif.action_code) { case WLAN_VHT_ACTION_OPMODE_NOTIF: { - u8 opmode; - /* verify opmode is present */ if (len < IEEE80211_MIN_ACTION_SIZE + 2) goto invalid; - - opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; - - ieee80211_vht_handle_opmode(rx->sdata, rx->sta, - opmode, status->band); - goto handled; + goto queue; } case WLAN_VHT_ACTION_GROUPID_MGMT: { if (len < IEEE80211_MIN_ACTION_SIZE + 25) diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 6832bf6ab69f..43e45bb660bc 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -527,8 +527,10 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, band); - if (changed > 0) + if (changed > 0) { + ieee80211_recalc_min_chandef(sdata); rate_control_rate_update(local, sband, sta, changed); + } } void ieee80211_get_vht_mask_from_cap(__le16 vht_cap, From ad5013d5699d30ded0cdbbc68b93b2aa28222c6e Mon Sep 17 00:00:00 2001 From: Colin King Date: Wed, 11 Jan 2017 11:43:10 +0000 Subject: [PATCH 329/645] perf/x86/intel: Use ULL constant to prevent undefined shift behaviour When x86_pmu.num_counters is 32 the shift of the integer constant 1 is exceeding 32bit and therefor undefined behaviour. Fix this by shifting 1ULL instead of 1. Reported-by: CoverityScan CID#1192105 ("Bad bit shift operation") Signed-off-by: Colin Ian King Cc: Andi Kleen Cc: Peter Zijlstra Cc: Kan Liang Cc: Stephane Eranian Cc: Alexander Shishkin Link: http://lkml.kernel.org/r/20170111114310.17928-1-colin.king@canonical.com Signed-off-by: Thomas Gleixner --- arch/x86/events/intel/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 86138267b68a..d611cab214a6 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -3987,7 +3987,7 @@ __init int intel_pmu_init(void) x86_pmu.num_counters, INTEL_PMC_MAX_GENERIC); x86_pmu.num_counters = INTEL_PMC_MAX_GENERIC; } - x86_pmu.intel_ctrl = (1 << x86_pmu.num_counters) - 1; + x86_pmu.intel_ctrl = (1ULL << x86_pmu.num_counters) - 1; if (x86_pmu.num_counters_fixed > INTEL_PMC_MAX_FIXED) { WARN(1, KERN_ERR "hw perf events fixed %d > max(%d), clipping!", From d6169d04097fd9ddf811e63eae4e5cd71e6666e2 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 11 Jan 2017 17:10:34 +0200 Subject: [PATCH 330/645] xhci: fix deadlock at host remove by running watchdog correctly If a URB is killed while the host is removed we can end up in a situation where the hub thread takes the roothub device lock, and waits for the URB to be given back by xhci-hcd, blocking the host remove code. xhci-hcd tries to stop the endpoint and give back the urb, but can't as the host is removed from PCI bus at the same time, preventing the normal way of giving back urb. Instead we need to rely on the stop command timeout function to give back the urb. This xhci_stop_endpoint_command_watchdog() timeout function used a XHCI_STATE_DYING flag to indicate if the timeout function is already running, but later this flag has been taking into use in other places to mark that xhci is dying. Remove checks for XHCI_STATE_DYING in xhci_urb_dequeue. We are still checking that reading from pci state does not return 0xffffffff or that host is not halted before trying to stop the endpoint. This whole area of stopping endpoints, giving back URBs, and the wathdog timeout need rework, this fix focuses on solving a specific deadlock issue that we can then send to stable before any major rework. Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 11 ----------- drivers/usb/host/xhci.c | 13 ------------- 2 files changed, 24 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 25f522b09dd9..e32029a31ca4 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -913,17 +913,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; - if (xhci->xhc_state & XHCI_STATE_REMOVING) { - spin_unlock_irqrestore(&xhci->lock, flags); - return; - } - if (xhci->xhc_state & XHCI_STATE_DYING) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Stop EP timer ran, but another timer marked " - "xHCI as DYING, exiting."); - spin_unlock_irqrestore(&xhci->lock, flags); - return; - } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Stop EP timer ran, but no command pending, " diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 0c8deb9ed42d..9a0ec116654a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1534,19 +1534,6 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_urb_free_priv(urb_priv); return ret; } - if ((xhci->xhc_state & XHCI_STATE_DYING) || - (xhci->xhc_state & XHCI_STATE_HALTED)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Ep 0x%x: URB %p to be canceled on " - "non-responsive xHCI host.", - urb->ep->desc.bEndpointAddress, urb); - /* Let the stop endpoint command watchdog timer (which set this - * state) finish cleaning up the endpoint TD lists. We must - * have caught it in the middle of dropping a lock and giving - * back an URB. - */ - goto done; - } ep_index = xhci_get_endpoint_index(&urb->ep->desc); ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; From 1392370ee7de8aa3f69936f55bea6bfcc9879c59 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Jan 2017 14:29:02 +0300 Subject: [PATCH 331/645] nvme-rdma: fix nvme_rdma_queue_is_ready Now that we don't abuse the cmd field in struct request for nvme command passthrough this function needs to be converted to the proper accessor as well. Fixes: d49187e97e ("nvme: introduce struct nvme_request") Signed-off-by: Christoph Hellwig Reviewed-by: Max Gurtovoy --- drivers/nvme/host/rdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index f587af345889..34e564857716 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1422,7 +1422,7 @@ static inline bool nvme_rdma_queue_is_ready(struct nvme_rdma_queue *queue, struct request *rq) { if (unlikely(!test_bit(NVME_RDMA_Q_LIVE, &queue->flags))) { - struct nvme_command *cmd = (struct nvme_command *)rq->cmd; + struct nvme_command *cmd = nvme_req(rq)->cmd; if (rq->cmd_type != REQ_TYPE_DRV_PRIV || cmd->common.opcode != nvme_fabrics_command || From b5a10c5f7532b7473776da87e67f8301bbc32693 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Wed, 28 Dec 2016 22:13:15 -0200 Subject: [PATCH 332/645] nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too Commit 54adc01055b7 ("nvme/quirk: Add a delay before checking for adapter readiness") introduced a quirk to adapters that cannot read the bit NVME_CSTS_RDY right after register NVME_REG_CC is set; these adapters need a delay or else the action of reading the bit NVME_CSTS_RDY could somehow corrupt adapter's registers state and it never recovers. When this quirk was added, we checked ctrl->tagset in order to avoid quirking in probe time, supposing we would never require such delay during probe. Well, it was too optimistic; we in fact need this quirk at probe time in some cases, like after a kexec. In some experiments, after abnormal shutdown of machine (aka power cord unplug), we booted into our bootloader in Power, which is a Linux kernel, and kexec'ed into another distro. If this kexec is too quick, we end up reaching the probe of NVMe adapter in that distro when adapter is in bad state (not fully initialized on our bootloader). What happens next is that nvme_wait_ready() is unable to complete, except if the quirk is enabled. So, this patch removes the original ctrl->tagset verification in order to enable the quirk even on probe time. Fixes: 54adc01055b7 ("nvme/quirk: Add a delay before checking for adapter readiness") Reported-by: Andrew Byrne Reported-by: Jaime A. H. Gomez Reported-by: Zachary D. Myers Signed-off-by: Guilherme G. Piccoli Acked-by: Jeffrey Lien Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 2fc86dc7a8df..8a3c3e32a704 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1106,12 +1106,7 @@ int nvme_disable_ctrl(struct nvme_ctrl *ctrl, u64 cap) if (ret) return ret; - /* Checking for ctrl->tagset is a trick to avoid sleeping on module - * load, since we only need the quirk on reset_controller. Notice - * that the HGST device needs this delay only in firmware activation - * procedure; unfortunately we have no (easy) way to verify this. - */ - if ((ctrl->quirks & NVME_QUIRK_DELAY_BEFORE_CHK_RDY) && ctrl->tagset) + if (ctrl->quirks & NVME_QUIRK_DELAY_BEFORE_CHK_RDY) msleep(NVME_QUIRK_DELAY_AMOUNT); return nvme_wait_ready(ctrl, cap, false); From fdf35a6b22247746a7053fc764d04218a9306f82 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 9 Jan 2017 15:56:14 +0100 Subject: [PATCH 333/645] drm: Fix broken VT switch with video=1366x768 option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I noticed that the VT switch doesn't work any longer with a Dell laptop with 1366x768 eDP when the machine is connected with a DP monitor. It behaves as if VT were switched, but the graphics remain frozen. Actually the keyboard works, so I could switch back to VT7 again. I tried to track down the problem, and encountered a long story until we reach to this error: - The machine is booted with video=1366x768 option (the distro installer seems to add it as default). - Recently, drm_helper_probe_single_connector_modes() deals with cmdline modes, and it tries to create a new mode when no matching mode is found. - The drm_mode_create_from_cmdline_mode() creates a mode based on either CVT of GFT according to the given cmdline mode; in our case, it's 1366x768. - Since both CVT and GFT can't express the width 1366 due to alignment, the resultant mode becomes 1368x768, slightly larger than the given size. - Later on, the atomic commit is performed, and in drm_atomic_check_only(), the size of each plane is checked. - The size check of 1366x768 fails due to the above, and eventually the whole VT switch fails. Back in the history, we've had a manual fix-up of 1368x768 in various places via c09dedb7a50e ("drm/edid: Add a workaround for 1366x768 HD panel"), but they have been all in drm_edid.c at probing the modes from EDID. For addressing the problem above, we need a similar hack to the mode newly created from cmdline, manually adjusting the width when the expected size is 1366 while we get 1368 instead. Fixes: eaf99c749d43 ("drm: Perform cmdline mode parsing during...") Cc: Signed-off-by: Takashi Iwai Link: http://patchwork.freedesktop.org/patch/msgid/20170109145614.29454-1-tiwai@suse.de Reviewed-by: Ville Syrjälä Signed-off-by: Ville Syrjälä --- drivers/gpu/drm/drm_modes.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index ac6a35212501..e6b19bc9021a 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -1460,6 +1460,13 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev, return NULL; mode->type |= DRM_MODE_TYPE_USERDEF; + /* fix up 1368x768: GFT/CVT can't express 1366 width due to alignment */ + if (cmd->xres == 1366 && mode->hdisplay == 1368) { + mode->hdisplay = 1366; + mode->hsync_start--; + mode->hsync_end--; + drm_mode_set_name(mode); + } drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); return mode; } From 0a417b8dc1f10b03e8f558b8a831f07ec4c23795 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 11 Jan 2017 10:20:04 -0800 Subject: [PATCH 334/645] xfs: Timely free truncated dirty pages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 99579ccec4e2 "xfs: skip dirty pages in ->releasepage()" started to skip dirty pages in xfs_vm_releasepage() which also has the effect that if a dirty page is truncated, it does not get freed by block_invalidatepage() and is lingering in LRU list waiting for reclaim. So a simple loop like: while true; do dd if=/dev/zero of=file bs=1M count=100 rm file done will keep using more and more memory until we hit low watermarks and start pagecache reclaim which will eventually reclaim also the truncate pages. Keeping these truncated (and thus never usable) pages in memory is just a waste of memory, is unnecessarily stressing page cache reclaim, and reportedly also leads to anonymous mmap(2) returning ENOMEM prematurely. So instead of just skipping dirty pages in xfs_vm_releasepage(), return to old behavior of skipping them only if they have delalloc or unwritten buffers and fix the spurious warnings by warning only if the page is clean. CC: stable@vger.kernel.org CC: Brian Foster CC: Vlastimil Babka Reported-by: Petr Tůma Fixes: 99579ccec4e271c3d4d4e7c946058766812afdab Signed-off-by: Jan Kara Reviewed-by: Brian Foster Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_aops.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 0f56fcd3a5d5..631e7c0e0a29 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -1152,19 +1152,22 @@ xfs_vm_releasepage( * block_invalidatepage() can send pages that are still marked dirty * but otherwise have invalidated buffers. * - * We've historically freed buffers on the latter. Instead, quietly - * filter out all dirty pages to avoid spurious buffer state warnings. - * This can likely be removed once shrink_active_list() is fixed. + * We want to release the latter to avoid unnecessary buildup of the + * LRU, skip the former and warn if we've left any lingering + * delalloc/unwritten buffers on clean pages. Skip pages with delalloc + * or unwritten buffers and warn if the page is not dirty. Otherwise + * try to release the buffers. */ - if (PageDirty(page)) - return 0; - xfs_count_page_state(page, &delalloc, &unwritten); - if (WARN_ON_ONCE(delalloc)) + if (delalloc) { + WARN_ON_ONCE(!PageDirty(page)); return 0; - if (WARN_ON_ONCE(unwritten)) + } + if (unwritten) { + WARN_ON_ONCE(!PageDirty(page)); return 0; + } return try_to_free_buffers(page); } From 6ed0993a0b859ce62edf2930ded683e452286d39 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 7 Jan 2017 09:27:49 +0300 Subject: [PATCH 335/645] vfio-mdev: return -EFAULT if copy_to_user() fails The copy_to_user() function returns the number of bytes which it wasn't able to copy but we want to return a negative error code. Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.") Signed-off-by: Dan Carpenter Reviewed-by: Kirti Wankhede Signed-off-by: Alex Williamson --- samples/vfio-mdev/mtty.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c index 1fc57a5093a7..975af5bbf28d 100644 --- a/samples/vfio-mdev/mtty.c +++ b/samples/vfio-mdev/mtty.c @@ -1180,7 +1180,10 @@ static long mtty_ioctl(struct mdev_device *mdev, unsigned int cmd, memcpy(&mdev_state->dev_info, &info, sizeof(info)); - return copy_to_user((void __user *)arg, &info, minsz); + if (copy_to_user((void __user *)arg, &info, minsz)) + return -EFAULT; + + return 0; } case VFIO_DEVICE_GET_REGION_INFO: { @@ -1201,7 +1204,10 @@ static long mtty_ioctl(struct mdev_device *mdev, unsigned int cmd, if (ret) return ret; - return copy_to_user((void __user *)arg, &info, minsz); + if (copy_to_user((void __user *)arg, &info, minsz)) + return -EFAULT; + + return 0; } case VFIO_DEVICE_GET_IRQ_INFO: @@ -1224,7 +1230,10 @@ static long mtty_ioctl(struct mdev_device *mdev, unsigned int cmd, if (info.count == -1) return -EINVAL; - return copy_to_user((void __user *)arg, &info, minsz); + if (copy_to_user((void __user *)arg, &info, minsz)) + return -EFAULT; + + return 0; } case VFIO_DEVICE_SET_IRQS: { From 5c677869e0abbffbade2cfd82d46d0eebe823f34 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 7 Jan 2017 09:28:40 +0300 Subject: [PATCH 336/645] vfio-mdev: buffer overflow in ioctl() This is a sample driver for documentation so the impact is probably pretty low. But we should check that bar_index is valid so we don't write beyond the end of the mdev_state->region_info[] array. Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.") Signed-off-by: Dan Carpenter Reviewed-by: Kirti Wankhede Signed-off-by: Alex Williamson --- samples/vfio-mdev/mtty.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c index 975af5bbf28d..382f4797428f 100644 --- a/samples/vfio-mdev/mtty.c +++ b/samples/vfio-mdev/mtty.c @@ -1073,7 +1073,7 @@ int mtty_get_region_info(struct mdev_device *mdev, { unsigned int size = 0; struct mdev_state *mdev_state; - int bar_index; + u32 bar_index; if (!mdev) return -EINVAL; @@ -1082,8 +1082,11 @@ int mtty_get_region_info(struct mdev_device *mdev, if (!mdev_state) return -EINVAL; - mutex_lock(&mdev_state->ops_lock); bar_index = region_info->index; + if (bar_index >= VFIO_PCI_NUM_REGIONS) + return -EINVAL; + + mutex_lock(&mdev_state->ops_lock); switch (bar_index) { case VFIO_PCI_CONFIG_REGION_INDEX: From 73da4268fdbae972f617946d1c690f2136964802 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 7 Jan 2017 09:30:08 +0300 Subject: [PATCH 337/645] vfio-mdev: remove some dead code We set info.count to 1 in mtty_get_irq_info() so static checkers complain that, "Why do we have impossible conditions?" The answer is that it seems to be left over dead code that can be safely removed. Signed-off-by: Dan Carpenter Reviewed-by: Kirti Wankhede Signed-off-by: Alex Williamson --- samples/vfio-mdev/mtty.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c index 382f4797428f..ca495686b9c3 100644 --- a/samples/vfio-mdev/mtty.c +++ b/samples/vfio-mdev/mtty.c @@ -1230,9 +1230,6 @@ static long mtty_ioctl(struct mdev_device *mdev, unsigned int cmd, if (ret) return ret; - if (info.count == -1) - return -EINVAL; - if (copy_to_user((void __user *)arg, &info, minsz)) return -EFAULT; From a89af4abdf9b353cdd6f61afc0eaaac403304873 Mon Sep 17 00:00:00 2001 From: Brendan McGrath Date: Sat, 7 Jan 2017 08:01:38 +1100 Subject: [PATCH 338/645] HID: i2c-hid: Add sleep between POWER ON and RESET Support for the Asus Touchpad was recently added. It turns out this device can fail initialisation (and become unusable) when the RESET command is sent too soon after the POWER ON command. Unfortunately the i2c-hid specification does not specify the need for a delay between these two commands. But it was discovered the Windows driver has a 1ms delay. As a result, this patch modifies the i2c-hid module to add a sleep inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms. See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further details. Signed-off-by: Brendan McGrath Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index 78fb32a7b103..ea3c3546cef7 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -426,6 +426,15 @@ static int i2c_hid_hwreset(struct i2c_client *client) if (ret) goto out_unlock; + /* + * The HID over I2C specification states that if a DEVICE needs time + * after the PWR_ON request, it should utilise CLOCK stretching. + * However, it has been observered that the Windows driver provides a + * 1ms sleep between the PWR_ON and RESET requests and that some devices + * rely on this. + */ + usleep_range(1000, 5000); + i2c_hid_dbg(ihid, "resetting...\n"); ret = i2c_hid_command(client, &hid_reset_cmd, NULL, 0); From 19c0f40d4fca3a47b8f784a627f0467f0138ccc8 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 11 Jan 2017 16:25:34 +0800 Subject: [PATCH 339/645] r8152: fix the sw rx checksum is unavailable Fix the hw rx checksum is always enabled, and the user couldn't switch it to sw rx checksum. Note that the RTL_VER_01 only support sw rx checksum only. Besides, the hw rx checksum for RTL_VER_02 is disabled after commit b9a321b48af4 ("r8152: Fix broken RX checksums."). Re-enable it. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index be418563cb18..f3b48ad90865 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1730,7 +1730,7 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc) u8 checksum = CHECKSUM_NONE; u32 opts2, opts3; - if (tp->version == RTL_VER_01 || tp->version == RTL_VER_02) + if (!(tp->netdev->features & NETIF_F_RXCSUM)) goto return_result; opts2 = le32_to_cpu(rx_desc->opts2); @@ -4356,6 +4356,11 @@ static int rtl8152_probe(struct usb_interface *intf, NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | NETIF_F_IPV6_CSUM | NETIF_F_TSO6; + if (tp->version == RTL_VER_01) { + netdev->features &= ~NETIF_F_RXCSUM; + netdev->hw_features &= ~NETIF_F_RXCSUM; + } + netdev->ethtool_ops = &ops; netif_set_gso_max_size(netdev, RTL_LIMITED_TSO_SIZE); From 4ecb1d83f6abe8d49163427f4d431ebe98f8bd5f Mon Sep 17 00:00:00 2001 From: Martynas Pumputis Date: Wed, 11 Jan 2017 15:18:53 +0000 Subject: [PATCH 340/645] vxlan: Set ports in flow key when doing route lookups Otherwise, a xfrm policy with sport/dport being set cannot be matched. Signed-off-by: Martynas Pumputis Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index bb70dd5723b5..ca7196c40060 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1798,7 +1798,7 @@ static int vxlan_build_skb(struct sk_buff *skb, struct dst_entry *dst, static struct rtable *vxlan_get_route(struct vxlan_dev *vxlan, struct net_device *dev, struct vxlan_sock *sock4, struct sk_buff *skb, int oif, u8 tos, - __be32 daddr, __be32 *saddr, + __be32 daddr, __be32 *saddr, __be16 dport, __be16 sport, struct dst_cache *dst_cache, const struct ip_tunnel_info *info) { @@ -1824,6 +1824,8 @@ static struct rtable *vxlan_get_route(struct vxlan_dev *vxlan, struct net_device fl4.flowi4_proto = IPPROTO_UDP; fl4.daddr = daddr; fl4.saddr = *saddr; + fl4.fl4_dport = dport; + fl4.fl4_sport = sport; rt = ip_route_output_key(vxlan->net, &fl4); if (likely(!IS_ERR(rt))) { @@ -1851,6 +1853,7 @@ static struct dst_entry *vxlan6_get_route(struct vxlan_dev *vxlan, __be32 label, const struct in6_addr *daddr, struct in6_addr *saddr, + __be16 dport, __be16 sport, struct dst_cache *dst_cache, const struct ip_tunnel_info *info) { @@ -1877,6 +1880,8 @@ static struct dst_entry *vxlan6_get_route(struct vxlan_dev *vxlan, fl6.flowlabel = ip6_make_flowinfo(RT_TOS(tos), label); fl6.flowi6_mark = skb->mark; fl6.flowi6_proto = IPPROTO_UDP; + fl6.fl6_dport = dport; + fl6.fl6_sport = sport; err = ipv6_stub->ipv6_dst_lookup(vxlan->net, sock6->sock->sk, @@ -2068,6 +2073,7 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, rdst ? rdst->remote_ifindex : 0, tos, dst->sin.sin_addr.s_addr, &src->sin.sin_addr.s_addr, + dst_port, src_port, dst_cache, info); if (IS_ERR(rt)) { err = PTR_ERR(rt); @@ -2104,6 +2110,7 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, rdst ? rdst->remote_ifindex : 0, tos, label, &dst->sin6.sin6_addr, &src->sin6.sin6_addr, + dst_port, src_port, dst_cache, info); if (IS_ERR(ndst)) { err = PTR_ERR(ndst); @@ -2430,7 +2437,7 @@ static int vxlan_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb) rt = vxlan_get_route(vxlan, dev, sock4, skb, 0, info->key.tos, info->key.u.ipv4.dst, - &info->key.u.ipv4.src, NULL, info); + &info->key.u.ipv4.src, dport, sport, NULL, info); if (IS_ERR(rt)) return PTR_ERR(rt); ip_rt_put(rt); @@ -2441,7 +2448,7 @@ static int vxlan_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb) ndst = vxlan6_get_route(vxlan, dev, sock6, skb, 0, info->key.tos, info->key.label, &info->key.u.ipv6.dst, - &info->key.u.ipv6.src, NULL, info); + &info->key.u.ipv6.src, dport, sport, NULL, info); if (IS_ERR(ndst)) return PTR_ERR(ndst); dst_release(ndst); From 0719e72ccb801829a3d735d187ca8417f0930459 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Wed, 11 Jan 2017 09:16:32 -0800 Subject: [PATCH 341/645] netvsc: add rcu_read locking to netvsc callback The receive callback (in tasklet context) is using RCU to get reference to associated VF network device but this is not safe. RCU read lock needs to be held. Found by running with full lockdep debugging enabled. Fixes: f207c10d9823 ("hv_netvsc: use RCU to protect vf_netdev") Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index c9414c054852..fcab8019dda0 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -659,6 +659,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, * policy filters on the host). Deliver these via the VF * interface in the guest. */ + rcu_read_lock(); vf_netdev = rcu_dereference(net_device_ctx->vf_netdev); if (vf_netdev && (vf_netdev->flags & IFF_UP)) net = vf_netdev; @@ -667,6 +668,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, skb = netvsc_alloc_recv_skb(net, packet, csum_info, *data, vlan_tci); if (unlikely(!skb)) { ++net->stats.rx_dropped; + rcu_read_unlock(); return NVSP_STAT_FAIL; } @@ -696,6 +698,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, * TODO - use NAPI? */ netif_rx(skb); + rcu_read_unlock(); return 0; } From 17e5fc58588b5e3df8220c90a9d8af55201d6b45 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 11 Jan 2017 17:55:45 +0100 Subject: [PATCH 342/645] scsi: qla2xxx: fix MSI-X vector affinity The first two or three vectors in qla2xxx adapter are global and not associated with a specific queue. They should not have IRQ affinity assigned. Signed-off-by: Christoph Hellwig Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_def.h | 2 +- drivers/scsi/qla2xxx/qla_isr.c | 15 +++++++++++---- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index f7df01b76714..69587a21cb06 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2732,7 +2732,7 @@ struct isp_operations { #define QLA_MSIX_FW_MODE(m) (((m) & (BIT_7|BIT_8|BIT_9)) >> 7) #define QLA_MSIX_FW_MODE_1(m) (QLA_MSIX_FW_MODE(m) == 1) -#define QLA_MSIX_DEFAULT 0x00 +#define QLA_BASE_VECTORS 2 /* default + RSP */ #define QLA_MSIX_RSP_Q 0x01 #define QLA_ATIO_VECTOR 0x02 #define QLA_MSIX_QPAIR_MULTIQ_RSP_Q 0x03 diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index af840bf587d5..e2ef303b2bcf 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -3017,13 +3017,20 @@ static struct qla_init_msix_entry qla82xx_msix_entries[] = { static int qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) { -#define MIN_MSIX_COUNT 2 int i, ret; struct qla_msix_entry *qentry; scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); + struct irq_affinity desc = { + .pre_vectors = QLA_BASE_VECTORS, + }; + + if (QLA_TGT_MODE_ENABLED() && IS_ATIO_MSIX_CAPABLE(ha)) + desc.pre_vectors++; + + ret = pci_alloc_irq_vectors_affinity(ha->pdev, QLA_BASE_VECTORS, + ha->msix_count, PCI_IRQ_MSIX | PCI_IRQ_AFFINITY, + &desc); - ret = pci_alloc_irq_vectors(ha->pdev, MIN_MSIX_COUNT, ha->msix_count, - PCI_IRQ_MSIX | PCI_IRQ_AFFINITY); if (ret < 0) { ql_log(ql_log_fatal, vha, 0x00c7, "MSI-X: Failed to enable support, " @@ -3074,7 +3081,7 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) } /* Enable MSI-X vectors for the base queue */ - for (i = 0; i < (QLA_MSIX_RSP_Q + 1); i++) { + for (i = 0; i < QLA_BASE_VECTORS; i++) { qentry = &ha->msix_entries[i]; qentry->handle = rsp; rsp->msix = qentry; From 98624c4fed0abd848b291fbd3da18c2251b79429 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 11 Jan 2017 17:55:46 +0100 Subject: [PATCH 343/645] scsi: qla2xxx: remove irq_affinity_notifier Now that qla2xxx uses the IRQ layer affinity assignment, affinity won't change over the life time of a device and the notifiers are useless. Signed-off-by: Christoph Hellwig Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_def.h | 1 - drivers/scsi/qla2xxx/qla_isr.c | 73 ---------------------------------- 2 files changed, 74 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 69587a21cb06..1549aace296a 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2754,7 +2754,6 @@ struct qla_msix_entry { uint16_t entry; char name[30]; void *handle; - struct irq_affinity_notify irq_notify; int cpuid; }; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index e2ef303b2bcf..5815403d1d65 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -18,10 +18,6 @@ static void qla2x00_status_entry(scsi_qla_host_t *, struct rsp_que *, void *); static void qla2x00_status_cont_entry(struct rsp_que *, sts_cont_entry_t *); static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *, sts_entry_t *); -static void qla_irq_affinity_notify(struct irq_affinity_notify *, - const cpumask_t *); -static void qla_irq_affinity_release(struct kref *); - /** * qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200. @@ -2571,14 +2567,6 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, if (!vha->flags.online) return; - if (rsp->msix && rsp->msix->cpuid != smp_processor_id()) { - /* if kernel does not notify qla of IRQ's CPU change, - * then set it here. - */ - rsp->msix->cpuid = smp_processor_id(); - ha->tgt.rspq_vector_cpuid = rsp->msix->cpuid; - } - while (rsp->ring_ptr->signature != RESPONSE_PROCESSED) { pkt = (struct sts_entry_24xx *)rsp->ring_ptr; @@ -3075,9 +3063,6 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) qentry->have_irq = 0; qentry->in_use = 0; qentry->handle = NULL; - qentry->irq_notify.notify = qla_irq_affinity_notify; - qentry->irq_notify.release = qla_irq_affinity_release; - qentry->cpuid = -1; } /* Enable MSI-X vectors for the base queue */ @@ -3099,18 +3084,6 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) goto msix_register_fail; qentry->have_irq = 1; qentry->in_use = 1; - - /* Register for CPU affinity notification. */ - irq_set_affinity_notifier(qentry->vector, &qentry->irq_notify); - - /* Schedule work (ie. trigger a notification) to read cpu - * mask for this specific irq. - * kref_get is required because - * irq_affinity_notify() will do - * kref_put(). - */ - kref_get(&qentry->irq_notify.kref); - schedule_work(&qentry->irq_notify.work); } /* @@ -3307,49 +3280,3 @@ int qla25xx_request_irq(struct qla_hw_data *ha, struct qla_qpair *qpair, msix->handle = qpair; return ret; } - - -/* irq_set_affinity/irqbalance will trigger notification of cpu mask update */ -static void qla_irq_affinity_notify(struct irq_affinity_notify *notify, - const cpumask_t *mask) -{ - struct qla_msix_entry *e = - container_of(notify, struct qla_msix_entry, irq_notify); - struct qla_hw_data *ha; - struct scsi_qla_host *base_vha; - struct rsp_que *rsp = e->handle; - - /* user is recommended to set mask to just 1 cpu */ - e->cpuid = cpumask_first(mask); - - ha = rsp->hw; - base_vha = pci_get_drvdata(ha->pdev); - - ql_dbg(ql_dbg_init, base_vha, 0xffff, - "%s: host %ld : vector %d cpu %d \n", __func__, - base_vha->host_no, e->vector, e->cpuid); - - if (e->have_irq) { - if ((IS_QLA83XX(ha) || IS_QLA27XX(ha)) && - (e->entry == QLA83XX_RSPQ_MSIX_ENTRY_NUMBER)) { - ha->tgt.rspq_vector_cpuid = e->cpuid; - ql_dbg(ql_dbg_init, base_vha, 0xffff, - "%s: host%ld: rspq vector %d cpu %d runtime change\n", - __func__, base_vha->host_no, e->vector, e->cpuid); - } - } -} - -static void qla_irq_affinity_release(struct kref *ref) -{ - struct irq_affinity_notify *notify = - container_of(ref, struct irq_affinity_notify, kref); - struct qla_msix_entry *e = - container_of(notify, struct qla_msix_entry, irq_notify); - struct rsp_que *rsp = e->handle; - struct scsi_qla_host *base_vha = pci_get_drvdata(rsp->hw->pdev); - - ql_dbg(ql_dbg_init, base_vha, 0xffff, - "%s: host%ld: vector %d cpu %d\n", __func__, - base_vha->host_no, e->vector, e->cpuid); -} From cd60be4916ae689387d04b86b6fc15931e4c95ae Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Wed, 11 Jan 2017 11:06:42 +0100 Subject: [PATCH 344/645] scsi: lpfc: avoid double free of resource identifiers Set variables initialized in lpfc_sli4_alloc_resource_identifiers() to NULL if an error occurred. Otherwise, lpfc_sli4_driver_resource_unset() attempts to free the memory again. Signed-off-by: Roberto Sassu Signed-off-by: Johannes Thumshirn Acked-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_sli.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 4faa7672fc1d..a78a3df68f67 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -5954,18 +5954,25 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) free_vfi_bmask: kfree(phba->sli4_hba.vfi_bmask); + phba->sli4_hba.vfi_bmask = NULL; free_xri_ids: kfree(phba->sli4_hba.xri_ids); + phba->sli4_hba.xri_ids = NULL; free_xri_bmask: kfree(phba->sli4_hba.xri_bmask); + phba->sli4_hba.xri_bmask = NULL; free_vpi_ids: kfree(phba->vpi_ids); + phba->vpi_ids = NULL; free_vpi_bmask: kfree(phba->vpi_bmask); + phba->vpi_bmask = NULL; free_rpi_ids: kfree(phba->sli4_hba.rpi_ids); + phba->sli4_hba.rpi_ids = NULL; free_rpi_bmask: kfree(phba->sli4_hba.rpi_bmask); + phba->sli4_hba.rpi_bmask = NULL; err_exit: return rc; } From 49c03096263871a68c9dea3e86b7d1e163d2fba8 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 11 Jan 2017 15:49:00 +0200 Subject: [PATCH 345/645] pinctrl: baytrail: Do not add all GPIOs to IRQ domain When DIRECT_IRQ_EN is set, the pin is routed directly to the IO-APIC bypassing the GPIO driver completely. However, the mask register is still used to determine if the pin is supposed to generate IRQ or not. So with commit 3ae02c14d964 the IRQ core masks all IRQs (because of handle_bad_irq()) the pin connected to the touchscreen gets masked as well and hence no interrupts. To make this all work as expected we do not add those GPIOs to the IRQ domain that can actually propagate interrupts. Fixes: 3ae02c14d964 ("pinctrl: intel: set default handler to be handle_bad_irq()") Reported-by: Robert R. Howell Suggested-by: Mika Westerberg Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-baytrail.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c index 67e92699b84e..c123488266ce 100644 --- a/drivers/pinctrl/intel/pinctrl-baytrail.c +++ b/drivers/pinctrl/intel/pinctrl-baytrail.c @@ -1623,6 +1623,8 @@ static void byt_gpio_irq_handler(struct irq_desc *desc) static void byt_gpio_irq_init_hw(struct byt_gpio *vg) { + struct gpio_chip *gc = &vg->chip; + struct device *dev = &vg->pdev->dev; void __iomem *reg; u32 base, value; int i; @@ -1644,10 +1646,12 @@ static void byt_gpio_irq_init_hw(struct byt_gpio *vg) } value = readl(reg); - if ((value & BYT_PIN_MUX) == byt_get_gpio_mux(vg, i) && - !(value & BYT_DIRECT_IRQ_EN)) { + if (value & BYT_DIRECT_IRQ_EN) { + clear_bit(i, gc->irq_valid_mask); + dev_dbg(dev, "excluding GPIO %d from IRQ domain\n", i); + } else if ((value & BYT_PIN_MUX) == byt_get_gpio_mux(vg, i)) { byt_gpio_clear_triggering(vg, i); - dev_dbg(&vg->pdev->dev, "disabling GPIO %d\n", i); + dev_dbg(dev, "disabling GPIO %d\n", i); } } @@ -1686,6 +1690,7 @@ static int byt_gpio_probe(struct byt_gpio *vg) gc->can_sleep = false; gc->parent = &vg->pdev->dev; gc->ngpio = vg->soc_data->npins; + gc->irq_need_valid_mask = true; #ifdef CONFIG_PM_SLEEP vg->saved_context = devm_kcalloc(&vg->pdev->dev, gc->ngpio, From 581d3c2025632f838fb08e5160dab752b3a1f527 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 11 Jan 2017 15:36:56 +0100 Subject: [PATCH 346/645] pinctrl: amd: avoid maybe-uninitalized warning Since gpio_dev->hwbank_num is now a variable, the compiler cannot figure out if pin_num is initialized at all: drivers/pinctrl/pinctrl-amd.c: In function 'amd_gpio_dbg_show': drivers/pinctrl/pinctrl-amd.c:210:3: warning: 'pin_num' may be used uninitialized in this function [-Wmaybe-uninitialized] for (; i < pin_num; i++) { ^~~ drivers/pinctrl/pinctrl-amd.c:172:21: warning: 'i' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds a 'default' statement to make that case well-defined. Fixes: 3bfd44306c65 ("pinctrl: amd: Add support for additional GPIO") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index c9a146948192..537b52055756 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -202,6 +202,8 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc) i = 128; pin_num = AMD_GPIO_PINS_BANK2 + i; break; + default: + return; } for (; i < pin_num; i++) { From 990758c53eafe5a220a780ed12e7b4d51b3df032 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 4 Jan 2017 06:30:16 +0100 Subject: [PATCH 347/645] usb: gadget: composite: Fix function used to free memory 'cdev->os_desc_req' has been allocated with 'usb_ep_alloc_request()' so 'usb_ep_free_request()' should be used to free it. Signed-off-by: Christophe JAILLET Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 002822d98fda..49d685ad0da9 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -2147,7 +2147,7 @@ int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, cdev->os_desc_req->buf = kmalloc(4096, GFP_KERNEL); if (!cdev->os_desc_req->buf) { ret = -ENOMEM; - kfree(cdev->os_desc_req); + usb_ep_free_request(ep0, cdev->os_desc_req); goto end; } cdev->os_desc_req->context = cdev; From 9383e084a88d04d442ea2dce128edff05f344e5c Mon Sep 17 00:00:00 2001 From: Vardan Mikayelyan Date: Thu, 5 Jan 2017 18:01:48 -0800 Subject: [PATCH 348/645] usb: dwc2: gadget: Fix DMA memory freeing Remove DMA memory free from EP disable flow by replacing dma_alloc_coherent with dmam_alloc_coherent. Tested-by: John Stultz Signed-off-by: Vardan Mikayelyan Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index c55db4aa54d6..2a9e51c176cc 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3749,8 +3749,8 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, __func__, epctrl, epctrl_reg); /* Allocate DMA descriptor chain for non-ctrl endpoints */ - if (using_desc_dma(hsotg)) { - hs_ep->desc_list = dma_alloc_coherent(hsotg->dev, + if (using_desc_dma(hsotg) && !hs_ep->desc_list) { + hs_ep->desc_list = dmam_alloc_coherent(hsotg->dev, MAX_DMA_DESC_NUM_GENERIC * sizeof(struct dwc2_dma_desc), &hs_ep->desc_list_dma, GFP_ATOMIC); @@ -3872,7 +3872,7 @@ error1: error2: if (ret && using_desc_dma(hsotg) && hs_ep->desc_list) { - dma_free_coherent(hsotg->dev, MAX_DMA_DESC_NUM_GENERIC * + dmam_free_coherent(hsotg->dev, MAX_DMA_DESC_NUM_GENERIC * sizeof(struct dwc2_dma_desc), hs_ep->desc_list, hs_ep->desc_list_dma); hs_ep->desc_list = NULL; @@ -3902,14 +3902,6 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) return -EINVAL; } - /* Remove DMA memory allocated for non-control Endpoints */ - if (using_desc_dma(hsotg)) { - dma_free_coherent(hsotg->dev, MAX_DMA_DESC_NUM_GENERIC * - sizeof(struct dwc2_dma_desc), - hs_ep->desc_list, hs_ep->desc_list_dma); - hs_ep->desc_list = NULL; - } - epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); spin_lock_irqsave(&hsotg->lock, flags); From 08f37148b6a915a6996c7dbef87769b9efee2dba Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Mon, 9 Jan 2017 13:46:00 +0000 Subject: [PATCH 349/645] usb: gadget: f_fs: Fix iterations on endpoints. When zero endpoints are declared for a function, there is no endpoint to disable, enable or free, so replace do...while loops with while loops. Change pre-decrement to post-decrement to iterate the same number of times when there are endpoints to process. Signed-off-by: Vincent Pelletier Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_fs.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 5e746adc8a2d..5490fc51638e 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1806,7 +1806,7 @@ static void ffs_func_eps_disable(struct ffs_function *func) unsigned long flags; spin_lock_irqsave(&func->ffs->eps_lock, flags); - do { + while (count--) { /* pending requests get nuked */ if (likely(ep->ep)) usb_ep_disable(ep->ep); @@ -1817,7 +1817,7 @@ static void ffs_func_eps_disable(struct ffs_function *func) __ffs_epfile_read_buffer_free(epfile); ++epfile; } - } while (--count); + } spin_unlock_irqrestore(&func->ffs->eps_lock, flags); } @@ -1831,7 +1831,7 @@ static int ffs_func_eps_enable(struct ffs_function *func) int ret = 0; spin_lock_irqsave(&func->ffs->eps_lock, flags); - do { + while(count--) { struct usb_endpoint_descriptor *ds; int desc_idx; @@ -1867,7 +1867,7 @@ static int ffs_func_eps_enable(struct ffs_function *func) ++ep; ++epfile; - } while (--count); + } spin_unlock_irqrestore(&func->ffs->eps_lock, flags); return ret; @@ -3448,12 +3448,12 @@ static void ffs_func_unbind(struct usb_configuration *c, /* cleanup after autoconfig */ spin_lock_irqsave(&func->ffs->eps_lock, flags); - do { + while (count--) { if (ep->ep && ep->req) usb_ep_free_request(ep->ep, ep->req); ep->req = NULL; ++ep; - } while (--count); + } spin_unlock_irqrestore(&func->ffs->eps_lock, flags); kfree(func->eps); func->eps = NULL; From b2f92f0ff0a26a6d758ce85167a77d7d1268ca36 Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Mon, 9 Jan 2017 13:09:55 -0800 Subject: [PATCH 350/645] usb: dwc2: use u32 for DT binding parameters Commit 05ee799f2021 ("usb: dwc2: Move gadget settings into core_params") changes to type u16 for DT binding "g-rx-fifo-size" and "g-np-tx-fifo-size" but use type u32 for "g-tx-fifo-size". Finally the the first two parameters cannot be passed successfully with wrong data format. This is found the data transferring broken on 96boards Hikey. This patch is to change all parameters to u32 type, and verified on Hikey board the DT parameters can pass successfully. [johnyoun: minor rebase] Signed-off-by: Leo Yan Signed-off-by: John Youn Tested-by: John Stultz Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.h | 4 ++-- drivers/usb/dwc2/params.c | 10 +++++----- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 9548d3e03453..302b8f5f7d27 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -513,8 +513,8 @@ struct dwc2_core_params { /* Gadget parameters */ bool g_dma; bool g_dma_desc; - u16 g_rx_fifo_size; - u16 g_np_tx_fifo_size; + u32 g_rx_fifo_size; + u32 g_np_tx_fifo_size; u32 g_tx_fifo_size[MAX_EPS_CHANNELS]; }; diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 11fe68a4627b..bcd1e19b4076 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -385,16 +385,16 @@ static void dwc2_set_param(struct dwc2_hsotg *hsotg, void *param, } /** - * dwc2_set_param_u16() - Set a u16 parameter + * dwc2_set_param_u32() - Set a u32 parameter * * See dwc2_set_param(). */ -static void dwc2_set_param_u16(struct dwc2_hsotg *hsotg, u16 *param, +static void dwc2_set_param_u32(struct dwc2_hsotg *hsotg, u32 *param, bool lookup, char *property, u16 legacy, u16 def, u16 min, u16 max) { dwc2_set_param(hsotg, param, lookup, property, - legacy, def, min, max, 2); + legacy, def, min, max, 4); } /** @@ -1178,12 +1178,12 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg, * auto-detect if the hardware does not support the * default. */ - dwc2_set_param_u16(hsotg, &p->g_rx_fifo_size, + dwc2_set_param_u32(hsotg, &p->g_rx_fifo_size, true, "g-rx-fifo-size", 2048, hw->rx_fifo_size, 16, hw->rx_fifo_size); - dwc2_set_param_u16(hsotg, &p->g_np_tx_fifo_size, + dwc2_set_param_u32(hsotg, &p->g_np_tx_fifo_size, true, "g-np-tx-fifo-size", 1024, hw->dev_nperio_tx_fifo_size, 16, hw->dev_nperio_tx_fifo_size); From 866932e2771f35d20ed2f1865bcf6af8dba765bb Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 9 Jan 2017 13:10:24 -0800 Subject: [PATCH 351/645] usb: dwc2: Avoid suspending if we're in gadget mode I've found when booting HiKey with the usb gadget cable attached if I then try to connect via adb, I get an infinite spew of: dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790ecb18 ep1out, 0) dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790eca18 ep1in, 0) It seems that the usb autosuspend is suspending the bus shortly after bootup when the gadget cable is attached. So when adbd then tries to use the device, it doesn't work and it then tries to restart it over and over via the ep_sethalt calls (via FUNCTIONFS_CLEAR_HALT ioctl). Chen Yu suggested this patch to avoid suspending if we're in device mode, and it avoids the problem. Cc: Wei Xu Cc: Guodong Xu Cc: Amit Pundir Cc: Rob Herring Cc: John Youn Cc: Douglas Anderson Cc: Chen Yu Cc: Kishon Vijay Abraham I Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Suggested-by: Chen Yu Signed-off-by: John Stultz Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 911c3b36ac06..8b264d4aaaeb 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4367,6 +4367,9 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd) if (!HCD_HW_ACCESSIBLE(hcd)) goto unlock; + if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) + goto unlock; + if (!hsotg->params.hibernation) goto skip_power_saving; From 8ae584d1951f241efd45499f8774fd7066f22823 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Tue, 10 Jan 2017 16:05:28 -0700 Subject: [PATCH 352/645] usb: dwc3: exynos fix axius clock error path to do cleanup Axius clock error path returns without disabling clock and suspend clock. Fix it to disable them before returning error. Reviewed-by: Javier Martinez Canillas Signed-off-by: Shuah Khan Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-exynos.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index e27899bb5706..e956306d9b0f 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -138,7 +138,8 @@ static int dwc3_exynos_probe(struct platform_device *pdev) exynos->axius_clk = devm_clk_get(dev, "usbdrd30_axius_clk"); if (IS_ERR(exynos->axius_clk)) { dev_err(dev, "no AXI UpScaler clk specified\n"); - return -ENODEV; + ret = -ENODEV; + goto axius_clk_err; } clk_prepare_enable(exynos->axius_clk); } else { @@ -196,6 +197,7 @@ err3: regulator_disable(exynos->vdd33); err2: clk_disable_unprepare(exynos->axius_clk); +axius_clk_err: clk_disable_unprepare(exynos->susp_clk); clk_disable_unprepare(exynos->clk); return ret; From 32856eea7bf75dfb99b955ada6e147f553a11366 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 11 Jan 2017 13:11:08 +0100 Subject: [PATCH 353/645] usb: gadget: udc: atmel: remove memory leak Commit bbe097f092b0 ("usb: gadget: udc: atmel: fix endpoint name") introduced a memory leak when unbinding the driver. The endpoint names would not be freed. Solve that by including the name as a string in struct usba_ep so it is freed when the endpoint is. Signed-off-by: Alexandre Belloni Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/atmel_usba_udc.c | 3 ++- drivers/usb/gadget/udc/atmel_usba_udc.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index f3212db9bc37..12c7687216e6 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1978,7 +1978,8 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, dev_err(&pdev->dev, "of_probe: name error(%d)\n", ret); goto err; } - ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", ep->index); + sprintf(ep->name, "ep%d", ep->index); + ep->ep.name = ep->name; ep->ep_regs = udc->regs + USBA_EPT_BASE(i); ep->dma_regs = udc->regs + USBA_DMA_BASE(i); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 3e1c9d589dfa..b03b2ebfc53a 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -280,6 +280,7 @@ struct usba_ep { void __iomem *ep_regs; void __iomem *dma_regs; void __iomem *fifo; + char name[8]; struct usb_ep ep; struct usba_udc *udc; From e88893fea17996018b2d68a22e677ea04f3baadf Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 5 Jan 2017 15:59:40 +0000 Subject: [PATCH 354/645] drm/i915: Clear ret before unbinding in i915_gem_evict_something() Missed when rebasing patches, I failed to set ret to zero before starting the unbind loop (which depends upon ret being zero). Reported-by: Matthew Auld Fixes: 9332f3b1b99a ("drm/i915: Combine loops within i915_gem_evict_something") Signed-off-by: Chris Wilson Cc: Matthew Auld Link: http://patchwork.freedesktop.org/patch/msgid/20170105155940.10033-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld Cc: # v4.9+ (cherry picked from commit 121dfbb2a2ef1c5f49e15c38ccc47ff0beb59446) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_evict.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c index bd08814b015c..d534a316a16e 100644 --- a/drivers/gpu/drm/i915/i915_gem_evict.c +++ b/drivers/gpu/drm/i915/i915_gem_evict.c @@ -199,6 +199,7 @@ found: } /* Unbinding will emit any required flushes */ + ret = 0; while (!list_empty(&eviction_list)) { vma = list_first_entry(&eviction_list, struct i915_vma, From e4621b73b6b472fe2b434b4f0f76b8f33ee26a73 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 6 Jan 2017 15:22:38 +0000 Subject: [PATCH 355/645] drm/i915: Fix phys pwrite for struct_mutex-less operation Since commit fe115628d567 ("drm/i915: Implement pwrite without struct-mutex") the lowlevel pwrite calls are now called without the protection of struct_mutex, but pwrite_phys was still asserting that it held the struct_mutex and later tried to drop and relock it. Fixes: fe115628d567 ("drm/i915: Implement pwrite without struct-mutex") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Link: http://patchwork.freedesktop.org/patch/msgid/20170106152240.5793-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin (cherry picked from commit 10466d2a59b23aa6d5ecd5310296c8cdb6458dac) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 34 ++++----------------------------- 1 file changed, 4 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3dd7fc662859..4b23a7814713 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -595,47 +595,21 @@ i915_gem_phys_pwrite(struct drm_i915_gem_object *obj, struct drm_i915_gem_pwrite *args, struct drm_file *file) { - struct drm_device *dev = obj->base.dev; void *vaddr = obj->phys_handle->vaddr + args->offset; char __user *user_data = u64_to_user_ptr(args->data_ptr); - int ret; /* We manually control the domain here and pretend that it * remains coherent i.e. in the GTT domain, like shmem_pwrite. */ - lockdep_assert_held(&obj->base.dev->struct_mutex); - ret = i915_gem_object_wait(obj, - I915_WAIT_INTERRUPTIBLE | - I915_WAIT_LOCKED | - I915_WAIT_ALL, - MAX_SCHEDULE_TIMEOUT, - to_rps_client(file)); - if (ret) - return ret; - intel_fb_obj_invalidate(obj, ORIGIN_CPU); - if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) { - unsigned long unwritten; - - /* The physical object once assigned is fixed for the lifetime - * of the obj, so we can safely drop the lock and continue - * to access vaddr. - */ - mutex_unlock(&dev->struct_mutex); - unwritten = copy_from_user(vaddr, user_data, args->size); - mutex_lock(&dev->struct_mutex); - if (unwritten) { - ret = -EFAULT; - goto out; - } - } + if (copy_from_user(vaddr, user_data, args->size)) + return -EFAULT; drm_clflush_virt_range(vaddr, args->size); - i915_gem_chipset_flush(to_i915(dev)); + i915_gem_chipset_flush(to_i915(obj->base.dev)); -out: intel_fb_obj_flush(obj, false, ORIGIN_CPU); - return ret; + return 0; } void *i915_gem_object_alloc(struct drm_device *dev) From 900742d89c1b4e04bd373aec8470b88e183f08ca Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 9 Jan 2017 12:00:22 -0600 Subject: [PATCH 356/645] x86/unwind: Silence warnings for non-current tasks There are a handful of callers to save_stack_trace_tsk() and show_stack() which try to unwind the stack of a task other than current. In such cases, it's remotely possible that the task is running on one CPU while the unwinder is reading its stack from another CPU, causing the unwinder to see stack corruption. These cases seem to be mostly harmless. The unwinder has checks which prevent it from following bad pointers beyond the bounds of the stack. So it's not really a bug as long as the caller understands that unwinding another task will not always succeed. Since stack "corruption" on another task's stack isn't necessarily a bug, silence the warnings when unwinding tasks other than current. Reported-by: Dave Jones Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: Dmitry Vyukov Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Miroslav Benes Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/00d8c50eea3446c1524a2a755397a3966629354c.1483978430.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/unwind_frame.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/x86/kernel/unwind_frame.c b/arch/x86/kernel/unwind_frame.c index 4443e499f279..195eebf6da20 100644 --- a/arch/x86/kernel/unwind_frame.c +++ b/arch/x86/kernel/unwind_frame.c @@ -207,6 +207,16 @@ bool unwind_next_frame(struct unwind_state *state) return true; bad_address: + /* + * When unwinding a non-current task, the task might actually be + * running on another CPU, in which case it could be modifying its + * stack while we're reading it. This is generally not a problem and + * can be ignored as long as the caller understands that unwinding + * another task will not always succeed. + */ + if (state->task != current) + goto the_end; + if (state->regs) { printk_deferred_once(KERN_WARNING "WARNING: kernel stack regs at %p in %s:%d has bad 'bp' value %p\n", From 84936118bdf37bda513d4a361c38181a216427e0 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 9 Jan 2017 12:00:23 -0600 Subject: [PATCH 357/645] x86/unwind: Disable KASAN checks for non-current tasks There are a handful of callers to save_stack_trace_tsk() and show_stack() which try to unwind the stack of a task other than current. In such cases, it's remotely possible that the task is running on one CPU while the unwinder is reading its stack from another CPU, causing the unwinder to see stack corruption. These cases seem to be mostly harmless. The unwinder has checks which prevent it from following bad pointers beyond the bounds of the stack. So it's not really a bug as long as the caller understands that unwinding another task will not always succeed. In such cases, it's possible that the unwinder may read a KASAN-poisoned region of the stack. Account for that by using READ_ONCE_NOCHECK() when reading the stack of another task. Use READ_ONCE() when reading the stack of the current task, since KASAN warnings can still be useful for finding bugs in that case. Reported-by: Dmitry Vyukov Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Jones Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Miroslav Benes Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/4c575eb288ba9f73d498dfe0acde2f58674598f1.1483978430.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/stacktrace.h | 5 ++++- arch/x86/kernel/unwind_frame.c | 20 ++++++++++++++++++-- 2 files changed, 22 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index a3269c897ec5..20ce3db20f24 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -52,13 +52,16 @@ static inline bool on_stack(struct stack_info *info, void *addr, size_t len) static inline unsigned long * get_frame_pointer(struct task_struct *task, struct pt_regs *regs) { + struct inactive_task_frame *frame; + if (regs) return (unsigned long *)regs->bp; if (task == current) return __builtin_frame_address(0); - return (unsigned long *)((struct inactive_task_frame *)task->thread.sp)->bp; + frame = (struct inactive_task_frame *)task->thread.sp; + return (unsigned long *)READ_ONCE_NOCHECK(frame->bp); } #else static inline unsigned long * diff --git a/arch/x86/kernel/unwind_frame.c b/arch/x86/kernel/unwind_frame.c index 195eebf6da20..23d15565d02a 100644 --- a/arch/x86/kernel/unwind_frame.c +++ b/arch/x86/kernel/unwind_frame.c @@ -6,6 +6,21 @@ #define FRAME_HEADER_SIZE (sizeof(long) * 2) +/* + * This disables KASAN checking when reading a value from another task's stack, + * since the other task could be running on another CPU and could have poisoned + * the stack in the meantime. + */ +#define READ_ONCE_TASK_STACK(task, x) \ +({ \ + unsigned long val; \ + if (task == current) \ + val = READ_ONCE(x); \ + else \ + val = READ_ONCE_NOCHECK(x); \ + val; \ +}) + static void unwind_dump(struct unwind_state *state, unsigned long *sp) { static bool dumped_before = false; @@ -48,7 +63,8 @@ unsigned long unwind_get_return_address(struct unwind_state *state) if (state->regs && user_mode(state->regs)) return 0; - addr = ftrace_graph_ret_addr(state->task, &state->graph_idx, *addr_p, + addr = READ_ONCE_TASK_STACK(state->task, *addr_p); + addr = ftrace_graph_ret_addr(state->task, &state->graph_idx, addr, addr_p); return __kernel_text_address(addr) ? addr : 0; @@ -162,7 +178,7 @@ bool unwind_next_frame(struct unwind_state *state) if (state->regs) next_bp = (unsigned long *)state->regs->bp; else - next_bp = (unsigned long *)*state->bp; + next_bp = (unsigned long *)READ_ONCE_TASK_STACK(state->task,*state->bp); /* is the next frame pointer an encoded pointer to pt_regs? */ regs = decode_frame_pointer(next_bp); From 2c96b2fe9c57b4267c3f0a680d82d7cc52e1c447 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 9 Jan 2017 12:00:24 -0600 Subject: [PATCH 358/645] x86/unwind: Include __schedule() in stack traces In the following commit: 0100301bfdf5 ("sched/x86: Rewrite the switch_to() code") ... the layout of the 'inactive_task_frame' struct was designed to have a frame pointer header embedded in it, so that the unwinder could use the 'bp' and 'ret_addr' fields to report __schedule() on the stack (or ret_from_fork() for newly forked tasks which haven't actually run yet). Finish the job by changing get_frame_pointer() to return a pointer to inactive_task_frame's 'bp' field rather than 'bp' itself. This allows the unwinder to start one frame higher on the stack, so that it properly reports __schedule(). Reported-by: Miroslav Benes Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Jones Cc: Denys Vlasenko Cc: Dmitry Vyukov Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/598e9f7505ed0aba86e8b9590aa528c6c7ae8dcd.1483978430.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/stacktrace.h | 5 +---- arch/x86/include/asm/switch_to.h | 10 +++++++++- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index 20ce3db20f24..2e41c50ddf47 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -52,16 +52,13 @@ static inline bool on_stack(struct stack_info *info, void *addr, size_t len) static inline unsigned long * get_frame_pointer(struct task_struct *task, struct pt_regs *regs) { - struct inactive_task_frame *frame; - if (regs) return (unsigned long *)regs->bp; if (task == current) return __builtin_frame_address(0); - frame = (struct inactive_task_frame *)task->thread.sp; - return (unsigned long *)READ_ONCE_NOCHECK(frame->bp); + return &((struct inactive_task_frame *)task->thread.sp)->bp; } #else static inline unsigned long * diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h index 5cb436acd463..fcc5cd387fd1 100644 --- a/arch/x86/include/asm/switch_to.h +++ b/arch/x86/include/asm/switch_to.h @@ -36,7 +36,10 @@ static inline void prepare_switch_to(struct task_struct *prev, asmlinkage void ret_from_fork(void); -/* data that is pointed to by thread.sp */ +/* + * This is the structure pointed to by thread.sp for an inactive task. The + * order of the fields must match the code in __switch_to_asm(). + */ struct inactive_task_frame { #ifdef CONFIG_X86_64 unsigned long r15; @@ -48,6 +51,11 @@ struct inactive_task_frame { unsigned long di; #endif unsigned long bx; + + /* + * These two fields must be together. They form a stack frame header, + * needed by get_frame_pointer(). + */ unsigned long bp; unsigned long ret_addr; }; From ff3f7e2475bbf9201e95824e72698fcdc5c3d47a Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 9 Jan 2017 12:00:25 -0600 Subject: [PATCH 359/645] x86/entry: Fix the end of the stack for newly forked tasks When unwinding a task, the end of the stack is always at the same offset right below the saved pt_regs, regardless of which syscall was used to enter the kernel. That convention allows the unwinder to verify that a stack is sane. However, newly forked tasks don't always follow that convention, as reported by the following unwinder warning seen by Dave Jones: WARNING: kernel stack frame pointer at ffffc90001443f30 in kworker/u8:8:30468 has bad value (null) The warning was due to the following call chain: (ftrace handler) call_usermodehelper_exec_async+0x5/0x140 ret_from_fork+0x22/0x30 The problem is that ret_from_fork() doesn't create a stack frame before calling other functions. Fix that by carefully using the frame pointer macros. In addition to conforming to the end of stack convention, this also makes related stack traces more sensible by making it clear to the user that ret_from_fork() was involved. Reported-by: Dave Jones Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: Dmitry Vyukov Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Miroslav Benes Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/8854cdaab980e9700a81e9ebf0d4238e4bbb68ef.1483978430.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/entry/entry_32.S | 30 +++++++++++------------------- arch/x86/entry/entry_64.S | 11 +++++++---- 2 files changed, 18 insertions(+), 23 deletions(-) diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 701d29f8e4d3..57f7ec35216e 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -254,23 +254,6 @@ ENTRY(__switch_to_asm) jmp __switch_to END(__switch_to_asm) -/* - * The unwinder expects the last frame on the stack to always be at the same - * offset from the end of the page, which allows it to validate the stack. - * Calling schedule_tail() directly would break that convention because its an - * asmlinkage function so its argument has to be pushed on the stack. This - * wrapper creates a proper "end of stack" frame header before the call. - */ -ENTRY(schedule_tail_wrapper) - FRAME_BEGIN - - pushl %eax - call schedule_tail - popl %eax - - FRAME_END - ret -ENDPROC(schedule_tail_wrapper) /* * A newly forked process directly context switches into this address. * @@ -279,15 +262,24 @@ ENDPROC(schedule_tail_wrapper) * edi: kernel thread arg */ ENTRY(ret_from_fork) - call schedule_tail_wrapper + FRAME_BEGIN /* help unwinder find end of stack */ + + /* + * schedule_tail() is asmlinkage so we have to put its 'prev' argument + * on the stack. + */ + pushl %eax + call schedule_tail + popl %eax testl %ebx, %ebx jnz 1f /* kernel threads are uncommon */ 2: /* When we fork, we trace the syscall return in the child, too. */ - movl %esp, %eax + leal FRAME_OFFSET(%esp), %eax call syscall_return_slowpath + FRAME_END jmp restore_all /* kernel thread */ diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 5b219707c2f2..044d18ebc43c 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -36,6 +36,7 @@ #include #include #include +#include #include .code64 @@ -408,17 +409,19 @@ END(__switch_to_asm) * r12: kernel thread arg */ ENTRY(ret_from_fork) + FRAME_BEGIN /* help unwinder find end of stack */ movq %rax, %rdi - call schedule_tail /* rdi: 'prev' task parameter */ + call schedule_tail /* rdi: 'prev' task parameter */ - testq %rbx, %rbx /* from kernel_thread? */ - jnz 1f /* kernel threads are uncommon */ + testq %rbx, %rbx /* from kernel_thread? */ + jnz 1f /* kernel threads are uncommon */ 2: - movq %rsp, %rdi + leaq FRAME_OFFSET(%rsp),%rdi /* pt_regs pointer */ call syscall_return_slowpath /* returns with IRQs disabled */ TRACE_IRQS_ON /* user mode is traced as IRQS on */ SWAPGS + FRAME_END jmp restore_regs_and_iret 1: From e1d070c3793a2766122865a7c2142853b48808c5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 21 Dec 2016 00:19:19 +0100 Subject: [PATCH 360/645] mmc: sdhci-acpi: Only powered up enabled acpi child devices Commit e5bbf30733f9 ("mmc: sdhci-acpi: Ensure connected devices are powered when probing") introduced code to powerup any acpi child nodes listed in the dstd. But some dstd-s list all possible devices used on some board variants, while reporting if the device is actually present and enabled in the status field of the device. So we end up calling the acpi _PS0 (power-on) method for devices which are not actually present. This does not always end well, e.g. on my cube iwork8 air tablet, this results in freezing the entire tablet as soon as the r8723bs module is loaded. This commit fixes this by checking the child device's status.present and status.enabled bits and only call acpi_device_fix_up_power() if both are set. Fixes: e5bbf30733f9 ("mmc: sdhci-acpi: Ensure connected devices are powered when probing") BugLink: https://github.com/hadess/rtl8723bs/issues/80 Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 160f695cc09c..278a5a435ab7 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -395,7 +395,8 @@ static int sdhci_acpi_probe(struct platform_device *pdev) /* Power on the SDHCI controller and its children */ acpi_device_fix_up_power(device); list_for_each_entry(child, &device->children, node) - acpi_device_fix_up_power(child); + if (child->status.present && child->status.enabled) + acpi_device_fix_up_power(child); if (acpi_bus_get_status(device) || !device->status.present) return -ENODEV; From 01167c7b9cbf099c69fe411a228e4e9c7104e123 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 5 Jan 2017 19:24:04 +0000 Subject: [PATCH 361/645] mmc: mxs-mmc: Fix additional cycles after transmission stop According to the code the intention is to append 8 SCK cycles instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this will never happened because it's an AC command not an ADTC command. So fix this by moving the statement into the right function. Signed-off-by: Stefan Wahren Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28) Cc: Signed-off-by: Ulf Hansson --- drivers/mmc/host/mxs-mmc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 44ecebd1ea8c..c8b8ac66ff7e 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -309,6 +309,9 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host) cmd0 = BF_SSP(cmd->opcode, CMD0_CMD); cmd1 = cmd->arg; + if (cmd->opcode == MMC_STOP_TRANSMISSION) + cmd0 |= BM_SSP_CMD0_APPEND_8CYC; + if (host->sdio_irq_en) { ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK; cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN; @@ -417,8 +420,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host) ssp->base + HW_SSP_BLOCK_SIZE); } - if ((cmd->opcode == MMC_STOP_TRANSMISSION) || - (cmd->opcode == SD_IO_RW_EXTENDED)) + if (cmd->opcode == SD_IO_RW_EXTENDED) cmd0 |= BM_SSP_CMD0_APPEND_8CYC; cmd1 = cmd->arg; From f0e8faa7a5e894b0fc99d24be1b18685a92ea466 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 16 Nov 2016 16:20:37 +0100 Subject: [PATCH 362/645] ARM: ux500: fix prcmu_is_cpu_in_wfi() calculation This function clearly never worked and always returns true, as pointed out by gcc-7: arch/arm/mach-ux500/pm.c: In function 'prcmu_is_cpu_in_wfi': arch/arm/mach-ux500/pm.c:137:212: error: ?: using integer constants in boolean context, the expression will always evaluate to 'true' [-Werror=int-in-bool-context] With the added braces, the condition actually makes sense. Fixes: 34fe6f107eab ("mfd : Check if the other db8500 core is in WFI") Signed-off-by: Arnd Bergmann Acked-by: Daniel Lezcano Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c index 8538910db202..a970e7fcba9e 100644 --- a/arch/arm/mach-ux500/pm.c +++ b/arch/arm/mach-ux500/pm.c @@ -134,8 +134,8 @@ bool prcmu_pending_irq(void) */ bool prcmu_is_cpu_in_wfi(int cpu) { - return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : - PRCM_ARM_WFI_STANDBY_WFI0; + return readl(PRCM_ARM_WFI_STANDBY) & + (cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : PRCM_ARM_WFI_STANDBY_WFI0); } /* From b6416e61012429e0277bd15a229222fd17afc1c1 Mon Sep 17 00:00:00 2001 From: David Matlack Date: Fri, 16 Dec 2016 14:30:35 -0800 Subject: [PATCH 363/645] jump_labels: API for flushing deferred jump label updates Modules that use static_key_deferred need a way to synchronize with any delayed work that is still pending when the module is unloaded. Introduce static_key_deferred_flush() which flushes any pending jump label updates. Signed-off-by: David Matlack Cc: stable@vger.kernel.org Acked-by: Peter Zijlstra (Intel) Signed-off-by: Paolo Bonzini --- include/linux/jump_label_ratelimit.h | 5 +++++ kernel/jump_label.c | 7 +++++++ 2 files changed, 12 insertions(+) diff --git a/include/linux/jump_label_ratelimit.h b/include/linux/jump_label_ratelimit.h index 089f70f83e97..23da3af459fe 100644 --- a/include/linux/jump_label_ratelimit.h +++ b/include/linux/jump_label_ratelimit.h @@ -14,6 +14,7 @@ struct static_key_deferred { #ifdef HAVE_JUMP_LABEL extern void static_key_slow_dec_deferred(struct static_key_deferred *key); +extern void static_key_deferred_flush(struct static_key_deferred *key); extern void jump_label_rate_limit(struct static_key_deferred *key, unsigned long rl); @@ -26,6 +27,10 @@ static inline void static_key_slow_dec_deferred(struct static_key_deferred *key) STATIC_KEY_CHECK_USE(); static_key_slow_dec(&key->key); } +static inline void static_key_deferred_flush(struct static_key_deferred *key) +{ + STATIC_KEY_CHECK_USE(); +} static inline void jump_label_rate_limit(struct static_key_deferred *key, unsigned long rl) diff --git a/kernel/jump_label.c b/kernel/jump_label.c index 93ad6c1fb9b6..a9b8cf500591 100644 --- a/kernel/jump_label.c +++ b/kernel/jump_label.c @@ -182,6 +182,13 @@ void static_key_slow_dec_deferred(struct static_key_deferred *key) } EXPORT_SYMBOL_GPL(static_key_slow_dec_deferred); +void static_key_deferred_flush(struct static_key_deferred *key) +{ + STATIC_KEY_CHECK_USE(); + flush_delayed_work(&key->work); +} +EXPORT_SYMBOL_GPL(static_key_deferred_flush); + void jump_label_rate_limit(struct static_key_deferred *key, unsigned long rl) { From cef84c302fe051744b983a92764d3fcca933415d Mon Sep 17 00:00:00 2001 From: David Matlack Date: Fri, 16 Dec 2016 14:30:36 -0800 Subject: [PATCH 364/645] KVM: x86: flush pending lapic jump label updates on module unload KVM's lapic emulation uses static_key_deferred (apic_{hw,sw}_disabled). These are implemented with delayed_work structs which can still be pending when the KVM module is unloaded. We've seen this cause kernel panics when the kvm_intel module is quickly reloaded. Use the new static_key_deferred_flush() API to flush pending updates on module unload. Signed-off-by: David Matlack Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/lapic.c | 6 ++++++ arch/x86/kvm/lapic.h | 1 + arch/x86/kvm/x86.c | 1 + 3 files changed, 8 insertions(+) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 5fe290c1b7d8..2f6ef5121a4c 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -2426,3 +2426,9 @@ void kvm_lapic_init(void) jump_label_rate_limit(&apic_hw_disabled, HZ); jump_label_rate_limit(&apic_sw_disabled, HZ); } + +void kvm_lapic_exit(void) +{ + static_key_deferred_flush(&apic_hw_disabled); + static_key_deferred_flush(&apic_sw_disabled); +} diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h index e0c80233b3e1..ff8039d61672 100644 --- a/arch/x86/kvm/lapic.h +++ b/arch/x86/kvm/lapic.h @@ -110,6 +110,7 @@ static inline bool kvm_hv_vapic_assist_page_enabled(struct kvm_vcpu *vcpu) int kvm_lapic_enable_pv_eoi(struct kvm_vcpu *vcpu, u64 data); void kvm_lapic_init(void); +void kvm_lapic_exit(void); #define VEC_POS(v) ((v) & (32 - 1)) #define REG_POS(v) (((v) >> 5) << 4) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 2f22810a7e0c..a0ac6e0060fb 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6045,6 +6045,7 @@ out: void kvm_arch_exit(void) { + kvm_lapic_exit(); perf_unregister_guest_info_callbacks(&kvm_guest_cbs); if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) From 129a72a0d3c8e139a04512325384fe5ac119e74d Mon Sep 17 00:00:00 2001 From: Steve Rutherford Date: Wed, 11 Jan 2017 18:28:29 -0800 Subject: [PATCH 365/645] KVM: x86: Introduce segmented_write_std Introduces segemented_write_std. Switches from emulated reads/writes to standard read/writes in fxsave, fxrstor, sgdt, and sidt. This fixes CVE-2017-2584, a longstanding kernel memory leak. Since commit 283c95d0e389 ("KVM: x86: emulate FXSAVE and FXRSTOR", 2016-11-09), which is luckily not yet in any final release, this would also be an exploitable kernel memory *write*! Reported-by: Dmitry Vyukov Cc: stable@vger.kernel.org Fixes: 96051572c819194c37a8367624b285be10297eca Fixes: 283c95d0e3891b64087706b344a4b545d04a6e62 Suggested-by: Paolo Bonzini Signed-off-by: Steve Rutherford Signed-off-by: Paolo Bonzini --- arch/x86/kvm/emulate.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 56628a44668b..f36d0fa6b885 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -818,6 +818,20 @@ static int segmented_read_std(struct x86_emulate_ctxt *ctxt, return ctxt->ops->read_std(ctxt, linear, data, size, &ctxt->exception); } +static int segmented_write_std(struct x86_emulate_ctxt *ctxt, + struct segmented_address addr, + void *data, + unsigned int size) +{ + int rc; + ulong linear; + + rc = linearize(ctxt, addr, size, true, &linear); + if (rc != X86EMUL_CONTINUE) + return rc; + return ctxt->ops->write_std(ctxt, linear, data, size, &ctxt->exception); +} + /* * Prefetch the remaining bytes of the instruction without crossing page * boundary if they are not in fetch_cache yet. @@ -3685,8 +3699,8 @@ static int emulate_store_desc_ptr(struct x86_emulate_ctxt *ctxt, } /* Disable writeback. */ ctxt->dst.type = OP_NONE; - return segmented_write(ctxt, ctxt->dst.addr.mem, - &desc_ptr, 2 + ctxt->op_bytes); + return segmented_write_std(ctxt, ctxt->dst.addr.mem, + &desc_ptr, 2 + ctxt->op_bytes); } static int em_sgdt(struct x86_emulate_ctxt *ctxt) @@ -3932,7 +3946,7 @@ static int em_fxsave(struct x86_emulate_ctxt *ctxt) else size = offsetof(struct fxregs_state, xmm_space[0]); - return segmented_write(ctxt, ctxt->memop.addr.mem, &fx_state, size); + return segmented_write_std(ctxt, ctxt->memop.addr.mem, &fx_state, size); } static int fxrstor_fixup(struct x86_emulate_ctxt *ctxt, @@ -3974,7 +3988,7 @@ static int em_fxrstor(struct x86_emulate_ctxt *ctxt) if (rc != X86EMUL_CONTINUE) return rc; - rc = segmented_read(ctxt, ctxt->memop.addr.mem, &fx_state, 512); + rc = segmented_read_std(ctxt, ctxt->memop.addr.mem, &fx_state, 512); if (rc != X86EMUL_CONTINUE) return rc; From 4f3dbdf47e150016aacd734e663347fcaa768303 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Thu, 5 Jan 2017 17:39:42 -0800 Subject: [PATCH 366/645] KVM: eventfd: fix NULL deref irqbypass consumer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported syzkaller: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] PGD 0 Oops: 0002 [#1] SMP CPU: 1 PID: 125 Comm: kworker/1:1 Not tainted 4.9.0+ #1 Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm] task: ffff9bbe0dfbb900 task.stack: ffffb61802014000 RIP: 0010:irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] Call Trace: irqfd_shutdown+0x66/0xa0 [kvm] process_one_work+0x16b/0x480 worker_thread+0x4b/0x500 kthread+0x101/0x140 ? process_one_work+0x480/0x480 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x25/0x30 RIP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] RSP: ffffb61802017e20 CR2: 0000000000000008 The syzkaller folks reported a NULL pointer dereference that due to unregister an consumer which fails registration before. The syzkaller creates two VMs w/ an equal eventfd occasionally. So the second VM fails to register an irqbypass consumer. It will make irqfd as inactive and queue an workqueue work to shutdown irqfd and unregister the irqbypass consumer when eventfd is closed. However, the second consumer has been initialized though it fails registration. So the token(same as the first VM's) is taken to unregister the consumer through the workqueue, the consumer of the first VM is found and unregistered, then NULL deref incurred in the path of deleting consumer from the consumers list. This patch fixes it by making irq_bypass_register/unregister_consumer() looks for the consumer entry based on consumer pointer itself instead of token matching. Reported-by: Dmitry Vyukov Suggested-by: Alex Williamson Cc: stable@vger.kernel.org Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Dmitry Vyukov Cc: Alex Williamson Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- virt/lib/irqbypass.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/virt/lib/irqbypass.c b/virt/lib/irqbypass.c index 52abac4bb6a2..6d2fcd6fcb25 100644 --- a/virt/lib/irqbypass.c +++ b/virt/lib/irqbypass.c @@ -195,7 +195,7 @@ int irq_bypass_register_consumer(struct irq_bypass_consumer *consumer) mutex_lock(&lock); list_for_each_entry(tmp, &consumers, node) { - if (tmp->token == consumer->token) { + if (tmp->token == consumer->token || tmp == consumer) { mutex_unlock(&lock); module_put(THIS_MODULE); return -EBUSY; @@ -245,7 +245,7 @@ void irq_bypass_unregister_consumer(struct irq_bypass_consumer *consumer) mutex_lock(&lock); list_for_each_entry(tmp, &consumers, node) { - if (tmp->token != consumer->token) + if (tmp != consumer) continue; list_for_each_entry(producer, &producers, node) { From 546d87e5c903a7f3ee7b9f998949a94729fbc65b Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Tue, 3 Jan 2017 18:56:19 -0800 Subject: [PATCH 367/645] KVM: x86: fix NULL deref in vcpu_scan_ioapic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 IP: _raw_spin_lock+0xc/0x30 PGD 3e28eb067 PUD 3f0ac6067 PMD 0 Oops: 0002 [#1] SMP CPU: 0 PID: 2431 Comm: test Tainted: G OE 4.10.0-rc1+ #3 Call Trace: ? kvm_ioapic_scan_entry+0x3e/0x110 [kvm] kvm_arch_vcpu_ioctl_run+0x10a8/0x15f0 [kvm] ? pick_next_task_fair+0xe1/0x4e0 ? kvm_arch_vcpu_load+0xea/0x260 [kvm] kvm_vcpu_ioctl+0x33a/0x600 [kvm] ? hrtimer_try_to_cancel+0x29/0x130 ? do_nanosleep+0x97/0xf0 do_vfs_ioctl+0xa1/0x5d0 ? __hrtimer_init+0x90/0x90 ? do_nanosleep+0x5b/0xf0 SyS_ioctl+0x79/0x90 do_syscall_64+0x6e/0x180 entry_SYSCALL64_slow_path+0x25/0x25 RIP: _raw_spin_lock+0xc/0x30 RSP: ffffa43688973cc0 The syzkaller folks reported a NULL pointer dereference due to ENABLE_CAP succeeding even without an irqchip. The Hyper-V synthetic interrupt controller is activated, resulting in a wrong request to rescan the ioapic and a NULL pointer dereference. #include #include #include #include #include #include #include #include #include #include #ifndef KVM_CAP_HYPERV_SYNIC #define KVM_CAP_HYPERV_SYNIC 123 #endif void* thr(void* arg) { struct kvm_enable_cap cap; cap.flags = 0; cap.cap = KVM_CAP_HYPERV_SYNIC; ioctl((long)arg, KVM_ENABLE_CAP, &cap); return 0; } int main() { void *host_mem = mmap(0, 0x1000, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); int kvmfd = open("/dev/kvm", 0); int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0); struct kvm_userspace_memory_region memreg; memreg.slot = 0; memreg.flags = 0; memreg.guest_phys_addr = 0; memreg.memory_size = 0x1000; memreg.userspace_addr = (unsigned long)host_mem; host_mem[0] = 0xf4; ioctl(vmfd, KVM_SET_USER_MEMORY_REGION, &memreg); int cpufd = ioctl(vmfd, KVM_CREATE_VCPU, 0); struct kvm_sregs sregs; ioctl(cpufd, KVM_GET_SREGS, &sregs); sregs.cr0 = 0; sregs.cr4 = 0; sregs.efer = 0; sregs.cs.selector = 0; sregs.cs.base = 0; ioctl(cpufd, KVM_SET_SREGS, &sregs); struct kvm_regs regs = { .rflags = 2 }; ioctl(cpufd, KVM_SET_REGS, ®s); ioctl(vmfd, KVM_CREATE_IRQCHIP, 0); pthread_t th; pthread_create(&th, 0, thr, (void*)(long)cpufd); usleep(rand() % 10000); ioctl(cpufd, KVM_RUN, 0); pthread_join(th, 0); return 0; } This patch fixes it by failing ENABLE_CAP if without an irqchip. Reported-by: Dmitry Vyukov Fixes: 5c919412fe61 (kvm/x86: Hyper-V synthetic interrupt controller) Cc: stable@vger.kernel.org # 4.5+ Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Dmitry Vyukov Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index a0ac6e0060fb..57d8a856cdc5 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3342,6 +3342,8 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, switch (cap->cap) { case KVM_CAP_HYPERV_SYNIC: + if (!irqchip_in_kernel(vcpu->kvm)) + return -EINVAL; return kvm_hv_activate_synic(vcpu); default: return -EINVAL; From 19c816e8e455f58da9997e4c6626f06203d8fbf0 Mon Sep 17 00:00:00 2001 From: Jike Song Date: Thu, 12 Jan 2017 16:52:02 +0800 Subject: [PATCH 368/645] capability: export has_capability has_capability() is sometimes needed by modules to test capability for specified task other than current, so export it. Cc: Kirti Wankhede Signed-off-by: Jike Song Acked-by: Serge Hallyn Acked-by: James Morris Signed-off-by: Alex Williamson --- kernel/capability.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/capability.c b/kernel/capability.c index a98e814f216f..f97fe77ceb88 100644 --- a/kernel/capability.c +++ b/kernel/capability.c @@ -318,6 +318,7 @@ bool has_capability(struct task_struct *t, int cap) { return has_ns_capability(t, &init_user_ns, cap); } +EXPORT_SYMBOL(has_capability); /** * has_ns_capability_noaudit - Does a task have a capability (unaudited) From 33ab91103b3415e12457e3104f0e4517ce12d0f3 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 12 Jan 2017 15:02:32 +0100 Subject: [PATCH 369/645] KVM: x86: fix emulation of "MOV SS, null selector" This is CVE-2017-2583. On Intel this causes a failed vmentry because SS's type is neither 3 nor 7 (even though the manual says this check is only done for usable SS, and the dmesg splat says that SS is unusable!). On AMD it's worse: svm.c is confused and sets CPL to 0 in the vmcb. The fix fabricates a data segment descriptor when SS is set to a null selector, so that CPL and SS.DPL are set correctly in the VMCS/vmcb. Furthermore, only allow setting SS to a NULL selector if SS.RPL < 3; this in turn ensures CPL < 3 because RPL must be equal to CPL. Thanks to Andy Lutomirski and Willy Tarreau for help in analyzing the bug and deciphering the manuals. Reported-by: Xiaohan Zhang Fixes: 79d5b4c3cd809c770d4bf9812635647016c56011 Cc: stable@nongnu.org Signed-off-by: Paolo Bonzini --- arch/x86/kvm/emulate.c | 48 +++++++++++++++++++++++++++++++++--------- 1 file changed, 38 insertions(+), 10 deletions(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index f36d0fa6b885..cedbba0f3402 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -1585,7 +1585,6 @@ static int write_segment_descriptor(struct x86_emulate_ctxt *ctxt, &ctxt->exception); } -/* Does not support long mode */ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt, u16 selector, int seg, u8 cpl, enum x86_transfer_type transfer, @@ -1622,20 +1621,34 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt, rpl = selector & 3; - /* NULL selector is not valid for TR, CS and SS (except for long mode) */ - if ((seg == VCPU_SREG_CS - || (seg == VCPU_SREG_SS - && (ctxt->mode != X86EMUL_MODE_PROT64 || rpl != cpl)) - || seg == VCPU_SREG_TR) - && null_selector) - goto exception; - /* TR should be in GDT only */ if (seg == VCPU_SREG_TR && (selector & (1 << 2))) goto exception; - if (null_selector) /* for NULL selector skip all following checks */ + /* NULL selector is not valid for TR, CS and (except for long mode) SS */ + if (null_selector) { + if (seg == VCPU_SREG_CS || seg == VCPU_SREG_TR) + goto exception; + + if (seg == VCPU_SREG_SS) { + if (ctxt->mode != X86EMUL_MODE_PROT64 || rpl != cpl) + goto exception; + + /* + * ctxt->ops->set_segment expects the CPL to be in + * SS.DPL, so fake an expand-up 32-bit data segment. + */ + seg_desc.type = 3; + seg_desc.p = 1; + seg_desc.s = 1; + seg_desc.dpl = cpl; + seg_desc.d = 1; + seg_desc.g = 1; + } + + /* Skip all following checks */ goto load; + } ret = read_segment_descriptor(ctxt, selector, &seg_desc, &desc_addr); if (ret != X86EMUL_CONTINUE) @@ -1751,6 +1764,21 @@ static int load_segment_descriptor(struct x86_emulate_ctxt *ctxt, u16 selector, int seg) { u8 cpl = ctxt->ops->cpl(ctxt); + + /* + * None of MOV, POP and LSS can load a NULL selector in CPL=3, but + * they can load it at CPL<3 (Intel's manual says only LSS can, + * but it's wrong). + * + * However, the Intel manual says that putting IST=1/DPL=3 in + * an interrupt gate will result in SS=3 (the AMD manual instead + * says it doesn't), so allow SS=3 in __load_segment_descriptor + * and only forbid it here. + */ + if (seg == VCPU_SREG_SS && selector == 3 && + ctxt->mode == X86EMUL_MODE_PROT64) + return emulate_exception(ctxt, GP_VECTOR, 0, true); + return __load_segment_descriptor(ctxt, selector, seg, cpl, X86_TRANSFER_NONE, NULL); } From 36bf38d158d3482119b3e159c0619b3c1539b508 Mon Sep 17 00:00:00 2001 From: Arkadi Sharshevsky Date: Thu, 12 Jan 2017 09:10:37 +0100 Subject: [PATCH 370/645] mlxsw: spectrum: Fix memory leak at skb reallocation During transmission the skb is checked for headroom in order to add vendor specific header. In case the skb needs to be re-allocated, skb_realloc_headroom() is called to make a private copy of the original, but doesn't release it. Current code assumes that the original skb is released during reallocation and only releases it at the error path which causes a memory leak. Fix this by adding the original skb release to the main path. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Arkadi Sharshevsky Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index d768c7b6c6d6..003093abb170 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -684,6 +684,7 @@ static netdev_tx_t mlxsw_sp_port_xmit(struct sk_buff *skb, dev_kfree_skb_any(skb_orig); return NETDEV_TX_OK; } + dev_consume_skb_any(skb_orig); } if (eth_skb_pad(skb)) { From 400fc0106dd8c27ed84781c929c1a184785b9c79 Mon Sep 17 00:00:00 2001 From: Arkadi Sharshevsky Date: Thu, 12 Jan 2017 09:10:38 +0100 Subject: [PATCH 371/645] mlxsw: switchx2: Fix memory leak at skb reallocation During transmission the skb is checked for headroom in order to add vendor specific header. In case the skb needs to be re-allocated, skb_realloc_headroom() is called to make a private copy of the original, but doesn't release it. Current code assumes that the original skb is released during reallocation and only releases it at the error path which causes a memory leak. Fix this by adding the original skb release to the main path. Fixes: d003462a50de ("mlxsw: Simplify mlxsw_sx_port_xmit function") Signed-off-by: Arkadi Sharshevsky Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/switchx2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c index 150ccf5192a9..2e88115e8735 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/switchx2.c +++ b/drivers/net/ethernet/mellanox/mlxsw/switchx2.c @@ -345,6 +345,7 @@ static netdev_tx_t mlxsw_sx_port_xmit(struct sk_buff *skb, dev_kfree_skb_any(skb_orig); return NETDEV_TX_OK; } + dev_consume_skb_any(skb_orig); } mlxsw_sx_txhdr_construct(skb, &tx_info); /* TX header is consumed by HW on the way so we shouldn't count its From 28e46a0f2e03ab4ed0e23cace1ea89a68c8c115b Mon Sep 17 00:00:00 2001 From: Elad Raz Date: Thu, 12 Jan 2017 09:10:39 +0100 Subject: [PATCH 372/645] mlxsw: pci: Fix EQE structure definition The event_data starts from address 0x00-0x0C and not from 0x08-0x014. This leads to duplication with other fields in the Event Queue Element such as sub-type, cqn and owner. Fixes: eda6500a987a0 ("mlxsw: Add PCI bus implementation") Signed-off-by: Elad Raz Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/pci_hw.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h index d147ddd97997..0af3338bfcb4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h +++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h @@ -209,21 +209,21 @@ MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1); /* pci_eqe_cmd_token * Command completion event - token */ -MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16); +MLXSW_ITEM32(pci, eqe, cmd_token, 0x00, 16, 16); /* pci_eqe_cmd_status * Command completion event - status */ -MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8); +MLXSW_ITEM32(pci, eqe, cmd_status, 0x00, 0, 8); /* pci_eqe_cmd_out_param_h * Command completion event - output parameter - higher part */ -MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32); +MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x04, 0, 32); /* pci_eqe_cmd_out_param_l * Command completion event - output parameter - lower part */ -MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32); +MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x08, 0, 32); #endif From f99e86485cc32cd16e5cc97f9bb0474f28608d84 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 12 Jan 2017 07:58:32 -0700 Subject: [PATCH 373/645] block: Rename blk_queue_zone_size and bdev_zone_size All block device data fields and functions returning a number of 512B sectors are by convention named xxx_sectors while names in the form xxx_size are generally used for a number of bytes. The blk_queue_zone_size and bdev_zone_size functions were not following this convention so rename them. No functional change is introduced by this patch. Signed-off-by: Damien Le Moal Collapsed the two patches, they were nonsensically split and broke bisection. Signed-off-by: Jens Axboe --- block/blk-zoned.c | 4 ++-- block/partition-generic.c | 14 +++++++------- fs/f2fs/segment.c | 4 ++-- fs/f2fs/super.c | 6 +++--- include/linux/blkdev.h | 6 +++--- 5 files changed, 17 insertions(+), 17 deletions(-) diff --git a/block/blk-zoned.c b/block/blk-zoned.c index 472211fa183a..3bd15d8095b1 100644 --- a/block/blk-zoned.c +++ b/block/blk-zoned.c @@ -16,7 +16,7 @@ static inline sector_t blk_zone_start(struct request_queue *q, sector_t sector) { - sector_t zone_mask = blk_queue_zone_size(q) - 1; + sector_t zone_mask = blk_queue_zone_sectors(q) - 1; return sector & ~zone_mask; } @@ -222,7 +222,7 @@ int blkdev_reset_zones(struct block_device *bdev, return -EINVAL; /* Check alignment (handle eventual smaller last zone) */ - zone_sectors = blk_queue_zone_size(q); + zone_sectors = blk_queue_zone_sectors(q); if (sector & (zone_sectors - 1)) return -EINVAL; diff --git a/block/partition-generic.c b/block/partition-generic.c index d7beb6bbbf66..7afb9907821f 100644 --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -434,7 +434,7 @@ static bool part_zone_aligned(struct gendisk *disk, struct block_device *bdev, sector_t from, sector_t size) { - unsigned int zone_size = bdev_zone_size(bdev); + unsigned int zone_sectors = bdev_zone_sectors(bdev); /* * If this function is called, then the disk is a zoned block device @@ -446,7 +446,7 @@ static bool part_zone_aligned(struct gendisk *disk, * regular block devices (no zone operation) and their zone size will * be reported as 0. Allow this case. */ - if (!zone_size) + if (!zone_sectors) return true; /* @@ -455,24 +455,24 @@ static bool part_zone_aligned(struct gendisk *disk, * use it. Check the zone size too: it should be a power of 2 number * of sectors. */ - if (WARN_ON_ONCE(!is_power_of_2(zone_size))) { + if (WARN_ON_ONCE(!is_power_of_2(zone_sectors))) { u32 rem; - div_u64_rem(from, zone_size, &rem); + div_u64_rem(from, zone_sectors, &rem); if (rem) return false; if ((from + size) < get_capacity(disk)) { - div_u64_rem(size, zone_size, &rem); + div_u64_rem(size, zone_sectors, &rem); if (rem) return false; } } else { - if (from & (zone_size - 1)) + if (from & (zone_sectors - 1)) return false; if ((from + size) < get_capacity(disk) && - (size & (zone_size - 1))) + (size & (zone_sectors - 1))) return false; } diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c index 0738f48293cc..0d8802453758 100644 --- a/fs/f2fs/segment.c +++ b/fs/f2fs/segment.c @@ -713,8 +713,8 @@ static int __f2fs_issue_discard_zone(struct f2fs_sb_info *sbi, } sector = SECTOR_FROM_BLOCK(blkstart); - if (sector & (bdev_zone_size(bdev) - 1) || - nr_sects != bdev_zone_size(bdev)) { + if (sector & (bdev_zone_sectors(bdev) - 1) || + nr_sects != bdev_zone_sectors(bdev)) { f2fs_msg(sbi->sb, KERN_INFO, "(%d) %s: Unaligned discard attempted (block %x + %x)", devi, sbi->s_ndevs ? FDEV(devi).path: "", diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 702638e21c76..46fd30d8af77 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -1553,16 +1553,16 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int devi) return 0; if (sbi->blocks_per_blkz && sbi->blocks_per_blkz != - SECTOR_TO_BLOCK(bdev_zone_size(bdev))) + SECTOR_TO_BLOCK(bdev_zone_sectors(bdev))) return -EINVAL; - sbi->blocks_per_blkz = SECTOR_TO_BLOCK(bdev_zone_size(bdev)); + sbi->blocks_per_blkz = SECTOR_TO_BLOCK(bdev_zone_sectors(bdev)); if (sbi->log_blocks_per_blkz && sbi->log_blocks_per_blkz != __ilog2_u32(sbi->blocks_per_blkz)) return -EINVAL; sbi->log_blocks_per_blkz = __ilog2_u32(sbi->blocks_per_blkz); FDEV(devi).nr_blkz = SECTOR_TO_BLOCK(nr_sectors) >> sbi->log_blocks_per_blkz; - if (nr_sectors & (bdev_zone_size(bdev) - 1)) + if (nr_sectors & (bdev_zone_sectors(bdev) - 1)) FDEV(devi).nr_blkz++; FDEV(devi).blkz_type = kmalloc(FDEV(devi).nr_blkz, GFP_KERNEL); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 83695641bd5e..ff3d774f2751 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -739,7 +739,7 @@ static inline bool blk_queue_is_zoned(struct request_queue *q) } } -static inline unsigned int blk_queue_zone_size(struct request_queue *q) +static inline unsigned int blk_queue_zone_sectors(struct request_queue *q) { return blk_queue_is_zoned(q) ? q->limits.chunk_sectors : 0; } @@ -1536,12 +1536,12 @@ static inline bool bdev_is_zoned(struct block_device *bdev) return false; } -static inline unsigned int bdev_zone_size(struct block_device *bdev) +static inline unsigned int bdev_zone_sectors(struct block_device *bdev) { struct request_queue *q = bdev_get_queue(bdev); if (q) - return blk_queue_zone_size(q); + return blk_queue_zone_sectors(q); return 0; } From 18a3ed59d09cf81a6447aadf6931bf0c9ffec5e0 Mon Sep 17 00:00:00 2001 From: Kazuya Mizuguchi Date: Thu, 12 Jan 2017 13:21:06 +0100 Subject: [PATCH 374/645] ravb: Remove Rx overflow log messages Remove Rx overflow log messages as in an environment where logging results in network traffic logging may cause further overflows. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Kazuya Mizuguchi [simon: reworked changelog] Signed-off-by: Simon Horman Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 92d7692c840d..5e5ad978eab9 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -926,14 +926,10 @@ static int ravb_poll(struct napi_struct *napi, int budget) /* Receive error message handling */ priv->rx_over_errors = priv->stats[RAVB_BE].rx_over_errors; priv->rx_over_errors += priv->stats[RAVB_NC].rx_over_errors; - if (priv->rx_over_errors != ndev->stats.rx_over_errors) { + if (priv->rx_over_errors != ndev->stats.rx_over_errors) ndev->stats.rx_over_errors = priv->rx_over_errors; - netif_err(priv, rx_err, ndev, "Receive Descriptor Empty\n"); - } - if (priv->rx_fifo_errors != ndev->stats.rx_fifo_errors) { + if (priv->rx_fifo_errors != ndev->stats.rx_fifo_errors) ndev->stats.rx_fifo_errors = priv->rx_fifo_errors; - netif_err(priv, rx_err, ndev, "Receive FIFO Overflow\n"); - } out: return budget - quota; } From c5a2a394835f473ae23931eda5066d3771d7b2f8 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 11 Jan 2017 18:18:40 -0800 Subject: [PATCH 375/645] spi: davinci: use dma_mapping_error() The correct error checking for dma_map_single() is to use dma_mapping_error(). Signed-off-by: Kevin Hilman Signed-off-by: Mark Brown --- drivers/spi/spi-davinci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index d36c11b73a35..02fb96797ac8 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -646,7 +646,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) buf = t->rx_buf; t->rx_dma = dma_map_single(&spi->dev, buf, t->len, DMA_FROM_DEVICE); - if (!t->rx_dma) { + if (dma_mapping_error(&spi->dev, !t->rx_dma)) { ret = -EFAULT; goto err_rx_map; } @@ -660,7 +660,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) buf = (void *)t->tx_buf; t->tx_dma = dma_map_single(&spi->dev, buf, t->len, DMA_TO_DEVICE); - if (!t->tx_dma) { + if (dma_mapping_error(&spi->dev, t->tx_dma)) { ret = -EFAULT; goto err_tx_map; } From 4b09ec4b14a168bf2c687e1f598140c3c11e9222 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Thu, 5 Jan 2017 10:20:16 -0500 Subject: [PATCH 376/645] nfs: Don't take a reference on fl->fl_file for LOCK operation I have reports of a crash that look like __fput() was called twice for a NFSv4.0 file. It seems possible that the state manager could try to reclaim a lock and take a reference on the fl->fl_file at the same time the file is being released if, during the close(), a signal interrupts the wait for outstanding IO while removing locks which then skips the removal of that lock. Since 83bfff23e9ed ("nfs4: have do_vfs_lock take an inode pointer") has removed the need to traverse fl->fl_file->f_inode in nfs4_lock_done(), taking that reference is no longer necessary. Signed-off-by: Benjamin Coddington Reviewed-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6dcbc5defb7a..700ed1fc1075 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include @@ -6127,7 +6126,6 @@ static struct nfs4_lockdata *nfs4_alloc_lockdata(struct file_lock *fl, p->server = server; atomic_inc(&lsp->ls_count); p->ctx = get_nfs_open_context(ctx); - get_file(fl->fl_file); memcpy(&p->fl, fl, sizeof(p->fl)); return p; out_free_seqid: @@ -6240,7 +6238,6 @@ static void nfs4_lock_release(void *calldata) nfs_free_seqid(data->arg.lock_seqid); nfs4_put_lock_state(data->lsp); put_nfs_open_context(data->ctx); - fput(data->fl.fl_file); kfree(data); dprintk("%s: done!\n", __func__); } From 41c066f2c4d436c535616fe182331766c57838f0 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Wed, 11 Jan 2017 14:54:53 +0000 Subject: [PATCH 377/645] arm64: assembler: make adr_l work in modules under KASLR When CONFIG_RANDOMIZE_MODULE_REGION_FULL=y, the offset between loaded modules and the core kernel may exceed 4 GB, putting symbols exported by the core kernel out of the reach of the ordinary adrp/add instruction pairs used to generate relative symbol references. So make the adr_l macro emit a movz/movk sequence instead when executing in module context. While at it, remove the pointless special case for the stack pointer. Acked-by: Mark Rutland Acked-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/assembler.h | 36 ++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 446f6c46d4b1..3a4301163e04 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -164,22 +164,25 @@ lr .req x30 // link register /* * Pseudo-ops for PC-relative adr/ldr/str , where - * is within the range +/- 4 GB of the PC. + * is within the range +/- 4 GB of the PC when running + * in core kernel context. In module context, a movz/movk sequence + * is used, since modules may be loaded far away from the kernel + * when KASLR is in effect. */ /* * @dst: destination register (64 bit wide) * @sym: name of the symbol - * @tmp: optional scratch register to be used if == sp, which - * is not allowed in an adrp instruction */ - .macro adr_l, dst, sym, tmp= - .ifb \tmp + .macro adr_l, dst, sym +#ifndef MODULE adrp \dst, \sym add \dst, \dst, :lo12:\sym - .else - adrp \tmp, \sym - add \dst, \tmp, :lo12:\sym - .endif +#else + movz \dst, #:abs_g3:\sym + movk \dst, #:abs_g2_nc:\sym + movk \dst, #:abs_g1_nc:\sym + movk \dst, #:abs_g0_nc:\sym +#endif .endm /* @@ -190,6 +193,7 @@ lr .req x30 // link register * the address */ .macro ldr_l, dst, sym, tmp= +#ifndef MODULE .ifb \tmp adrp \dst, \sym ldr \dst, [\dst, :lo12:\sym] @@ -197,6 +201,15 @@ lr .req x30 // link register adrp \tmp, \sym ldr \dst, [\tmp, :lo12:\sym] .endif +#else + .ifb \tmp + adr_l \dst, \sym + ldr \dst, [\dst] + .else + adr_l \tmp, \sym + ldr \dst, [\tmp] + .endif +#endif .endm /* @@ -206,8 +219,13 @@ lr .req x30 // link register * while needs to be preserved. */ .macro str_l, src, sym, tmp +#ifndef MODULE adrp \tmp, \sym str \src, [\tmp, :lo12:\sym] +#else + adr_l \tmp, \sym + str \src, [\tmp] +#endif .endm /* From cc8e8342930129aa2c9b629e1653e4681f0896ea Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 4 Jan 2017 16:21:58 +0800 Subject: [PATCH 378/645] ceph: fix mds cluster availability check We should apply the check after getting the initial mdsmap. Fixes: e9e427f0a14f ("ceph: check availability of mds cluster on mount") Link: http://tracker.ceph.com/issues/18161 Signed-off-by: Yan, Zheng --- fs/ceph/mds_client.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 4f49253387a0..ec6b35e9f966 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -2106,6 +2106,11 @@ static int __do_request(struct ceph_mds_client *mdsc, dout("do_request mdsmap err %d\n", err); goto finish; } + if (mdsc->mdsmap->m_epoch == 0) { + dout("do_request no mdsmap, waiting for map\n"); + list_add(&req->r_wait, &mdsc->waiting_for_map); + goto finish; + } if (!(mdsc->fsc->mount_options->flags & CEPH_MOUNT_OPT_MOUNTWAIT) && !ceph_mdsmap_is_cluster_available(mdsc->mdsmap)) { From 84fcc2d2bd6cbf621e49e1d0f7eaef2e3c666b40 Mon Sep 17 00:00:00 2001 From: "Geng, Jichao" Date: Thu, 5 Jan 2017 16:50:39 +0800 Subject: [PATCH 379/645] ceph: fix get_oldest_context() For no snapshot case, we should use ci->truncate_{seq,size}. Fixes: 5f743e456606 ("ceph: record truncate size/seq for snap data writeback") Signed-off-by: Geng, Jichao Signed-off-by: Yan, Zheng --- fs/ceph/addr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 9cd0c0ea7cdb..e4b066cd912a 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -502,9 +502,9 @@ static struct ceph_snap_context *get_oldest_context(struct inode *inode, dout(" head snapc %p has %d dirty pages\n", snapc, ci->i_wrbuffer_ref_head); if (truncate_size) - *truncate_size = capsnap->truncate_size; + *truncate_size = ci->i_truncate_size; if (truncate_seq) - *truncate_seq = capsnap->truncate_seq; + *truncate_seq = ci->i_truncate_seq; } spin_unlock(&ci->i_ceph_lock); return snapc; From 30f939feaeee23e21391cfc7b484f012eb189c3c Mon Sep 17 00:00:00 2001 From: Vlad Tsyrklevich Date: Mon, 9 Jan 2017 22:53:36 +0700 Subject: [PATCH 380/645] i2c: fix kernel memory disclosure in dev interface i2c_smbus_xfer() does not always fill an entire block, allowing kernel stack memory disclosure through the temp variable. Clear it before it's read to. Signed-off-by: Vlad Tsyrklevich Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/i2c-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 66f323fd3982..6f638bbc922d 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -331,7 +331,7 @@ static noinline int i2cdev_ioctl_smbus(struct i2c_client *client, unsigned long arg) { struct i2c_smbus_ioctl_data data_arg; - union i2c_smbus_data temp; + union i2c_smbus_data temp = {}; int datasize, res; if (copy_from_user(&data_arg, From 331c34255293cd02d395b7097008b509ba89e60e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 4 Jan 2017 20:57:22 -0800 Subject: [PATCH 381/645] i2c: do not enable fall back to Host Notify by default MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Falling back unconditionally to HostNotify as primary client's interrupt breaks some drivers which alter their functionality depending on whether interrupt is present or not, so let's introduce a board flag telling I2C core explicitly if we want wired interrupt or HostNotify-based one: I2C_CLIENT_HOST_NOTIFY. For DT-based systems we introduce "host-notify" property that we convert to I2C_CLIENT_HOST_NOTIFY board flag. Tested-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov Acked-by: Pali Rohár Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c.txt | 8 ++++++++ drivers/i2c/i2c-core.c | 17 ++++++++--------- include/linux/i2c.h | 1 + 3 files changed, 17 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index 5fa691e6f638..cee9d5055fa2 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below. "irq" and "wakeup" names are recognized by I2C core, other names are left to individual drivers. +- host-notify + device uses SMBus host notify protocol instead of interrupt line. + - multi-master states that there is another master active on this bus. The OS can use this information to adapt power management to keep the arbitration awake @@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts used by the device. I2C core will assign "irq" interrupt (or the very first interrupt if not using interrupt names) as primary interrupt for the slave. +Alternatively, devices supporting SMbus Host Notify, and connected to +adapters that support this feature, may use "host-notify" property. I2C +core will create a virtual interrupt for Host Notify and assign it as +primary interrupt for the slave. + Also, if device is marked as a wakeup source, I2C core will set up "wakeup" interrupt for the device. If "wakeup" interrupt name is not present in the binding, then primary interrupt will be used as wakeup interrupt. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index cf9e396d7702..7b117240f1ea 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -931,7 +931,10 @@ static int i2c_device_probe(struct device *dev) if (!client->irq) { int irq = -ENOENT; - if (dev->of_node) { + if (client->flags & I2C_CLIENT_HOST_NOTIFY) { + dev_dbg(dev, "Using Host Notify IRQ\n"); + irq = i2c_smbus_host_notify_to_irq(client); + } else if (dev->of_node) { irq = of_irq_get_byname(dev->of_node, "irq"); if (irq == -EINVAL || irq == -ENODATA) irq = of_irq_get(dev->of_node, 0); @@ -940,14 +943,7 @@ static int i2c_device_probe(struct device *dev) } if (irq == -EPROBE_DEFER) return irq; - /* - * ACPI and OF did not find any useful IRQ, try to see - * if Host Notify can be used. - */ - if (irq < 0) { - dev_dbg(dev, "Using Host Notify IRQ\n"); - irq = i2c_smbus_host_notify_to_irq(client); - } + if (irq < 0) irq = 0; @@ -1716,6 +1712,9 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, info.of_node = of_node_get(node); info.archdata = &dev_ad; + if (of_property_read_bool(node, "host-notify")) + info.flags |= I2C_CLIENT_HOST_NOTIFY; + if (of_get_property(node, "wakeup-source", NULL)) info.flags |= I2C_CLIENT_WAKE; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index b2109c522dec..4b45ec46161f 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -665,6 +665,7 @@ i2c_unlock_adapter(struct i2c_adapter *adapter) #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ /* Must equal I2C_M_TEN below */ #define I2C_CLIENT_SLAVE 0x20 /* we are the slave */ +#define I2C_CLIENT_HOST_NOTIFY 0x40 /* We want to use I2C host notify */ #define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */ #define I2C_CLIENT_SCCB 0x9000 /* Use Omnivision SCCB protocol */ /* Must match I2C_M_STOP|IGNORE_NAK */ From 6f724fb3039522486fce2e32e4c0fbe238a6ab02 Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 6 Jan 2017 19:02:57 +0800 Subject: [PATCH 382/645] i2c: print correct device invalid address In of_i2c_register_device(), when the check for device address validity fails we print the info.addr, which has not been assigned properly. Fix this by printing the actual invalid address. Signed-off-by: John Garry Reviewed-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang Fixes: b4e2f6ac1281 ("i2c: apply DT flags when probing") Cc: stable@kernel.org --- drivers/i2c/i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 7b117240f1ea..c26296c2eac5 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1704,7 +1704,7 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, if (i2c_check_addr_validity(addr, info.flags)) { dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", - info.addr, node->full_name); + addr, node->full_name); return ERR_PTR(-EINVAL); } From 2659161dd40dbb599a19f320164373093df44a89 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 29 Dec 2016 22:27:33 +0000 Subject: [PATCH 383/645] i2c: fix spelling mistake: "insufficent" -> "insufficient" Trivial fix to spelling mistake in WARN message, insufficient has an insufficient number of i's in the spelling. Signed-off-by: Colin Ian King Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index c26296c2eac5..583e95042a21 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -3632,7 +3632,7 @@ int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) int ret; if (!client || !slave_cb) { - WARN(1, "insufficent data\n"); + WARN(1, "insufficient data\n"); return -EINVAL; } From 3846fd9b86001bea171943cc3bb9222cb6da6b42 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 11 Jan 2017 10:01:17 +0100 Subject: [PATCH 384/645] drm/probe-helpers: Drop locking from poll_enable It was only needed to protect the connector_list walking, see commit 8c4ccc4ab6f64e859d4ff8d7c02c2ed2e956e07f Author: Daniel Vetter Date: Thu Jul 9 23:44:26 2015 +0200 drm/probe-helper: Grab mode_config.mutex in poll_init/enable Unfortunately the commit message of that patch fails to mention that the new locking check was for the connector_list. But that requirement disappeared in commit c36a3254f7857f1ad9badbe3578ccc92be541a8e Author: Daniel Vetter Date: Thu Dec 15 16:58:43 2016 +0100 drm: Convert all helpers to drm_connector_list_iter and so we can drop this again. This fixes a locking inversion on nouveau, where the rpm code needs to re-enable. But in other places the rpm_get() calls are nested within the big modeset locks. While at it, also improve the kerneldoc for these two functions a notch. v2: Update the kerneldoc even more to explain that these functions can't be called concurrently, or bad things happen (Chris). Cc: Dave Airlie Reviewed-by: Chris Wilson Cc: Chris Wilson Tested-by: Lyude Reviewed-by: Lyude Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170111090117.5134-1-daniel.vetter@ffwll.ch --- drivers/gpu/drm/drm_probe_helper.c | 51 +++++++++++----------------- drivers/gpu/drm/i915/intel_hotplug.c | 4 +-- include/drm/drm_crtc_helper.h | 1 - 3 files changed, 22 insertions(+), 34 deletions(-) diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index cf8f0128c161..b452a7ccd84b 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -115,24 +115,27 @@ static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector) #define DRM_OUTPUT_POLL_PERIOD (10*HZ) /** - * drm_kms_helper_poll_enable_locked - re-enable output polling. + * drm_kms_helper_poll_enable - re-enable output polling. * @dev: drm_device * - * This function re-enables the output polling work without - * locking the mode_config mutex. + * This function re-enables the output polling work, after it has been + * temporarily disabled using drm_kms_helper_poll_disable(), for example over + * suspend/resume. * - * This is like drm_kms_helper_poll_enable() however it is to be - * called from a context where the mode_config mutex is locked - * already. + * Drivers can call this helper from their device resume implementation. It is + * an error to call this when the output polling support has not yet been set + * up. + * + * Note that calls to enable and disable polling must be strictly ordered, which + * is automatically the case when they're only call from suspend/resume + * callbacks. */ -void drm_kms_helper_poll_enable_locked(struct drm_device *dev) +void drm_kms_helper_poll_enable(struct drm_device *dev) { bool poll = false; struct drm_connector *connector; unsigned long delay = DRM_OUTPUT_POLL_PERIOD; - WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); - if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll) return; @@ -160,7 +163,7 @@ void drm_kms_helper_poll_enable_locked(struct drm_device *dev) if (poll) schedule_delayed_work(&dev->mode_config.output_poll_work, delay); } -EXPORT_SYMBOL(drm_kms_helper_poll_enable_locked); +EXPORT_SYMBOL(drm_kms_helper_poll_enable); static enum drm_connector_status drm_connector_detect(struct drm_connector *connector, bool force) @@ -287,7 +290,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, /* Re-enable polling in case the global poll config changed. */ if (drm_kms_helper_poll != dev->mode_config.poll_running) - drm_kms_helper_poll_enable_locked(dev); + drm_kms_helper_poll_enable(dev); dev->mode_config.poll_running = drm_kms_helper_poll; @@ -479,8 +482,12 @@ out: * This function disables the output polling work. * * Drivers can call this helper from their device suspend implementation. It is - * not an error to call this even when output polling isn't enabled or arlready - * disabled. + * not an error to call this even when output polling isn't enabled or already + * disabled. Polling is re-enabled by calling drm_kms_helper_poll_enable(). + * + * Note that calls to enable and disable polling must be strictly ordered, which + * is automatically the case when they're only call from suspend/resume + * callbacks. */ void drm_kms_helper_poll_disable(struct drm_device *dev) { @@ -490,24 +497,6 @@ void drm_kms_helper_poll_disable(struct drm_device *dev) } EXPORT_SYMBOL(drm_kms_helper_poll_disable); -/** - * drm_kms_helper_poll_enable - re-enable output polling. - * @dev: drm_device - * - * This function re-enables the output polling work. - * - * Drivers can call this helper from their device resume implementation. It is - * an error to call this when the output polling support has not yet been set - * up. - */ -void drm_kms_helper_poll_enable(struct drm_device *dev) -{ - mutex_lock(&dev->mode_config.mutex); - drm_kms_helper_poll_enable_locked(dev); - mutex_unlock(&dev->mode_config.mutex); -} -EXPORT_SYMBOL(drm_kms_helper_poll_enable); - /** * drm_kms_helper_poll_init - initialize and enable output polling * @dev: drm_device diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c index 3d546c019de0..b62e3f8ad415 100644 --- a/drivers/gpu/drm/i915/intel_hotplug.c +++ b/drivers/gpu/drm/i915/intel_hotplug.c @@ -180,7 +180,7 @@ static void intel_hpd_irq_storm_disable(struct drm_i915_private *dev_priv) /* Enable polling and queue hotplug re-enabling. */ if (hpd_disabled) { - drm_kms_helper_poll_enable_locked(dev); + drm_kms_helper_poll_enable(dev); mod_delayed_work(system_wq, &dev_priv->hotplug.reenable_work, msecs_to_jiffies(HPD_STORM_REENABLE_DELAY)); } @@ -511,7 +511,7 @@ static void i915_hpd_poll_init_work(struct work_struct *work) } if (enabled) - drm_kms_helper_poll_enable_locked(dev); + drm_kms_helper_poll_enable(dev); mutex_unlock(&dev->mode_config.mutex); diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 982c299e435a..d026f5017c33 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -73,6 +73,5 @@ extern void drm_kms_helper_hotplug_event(struct drm_device *dev); extern void drm_kms_helper_poll_disable(struct drm_device *dev); extern void drm_kms_helper_poll_enable(struct drm_device *dev); -extern void drm_kms_helper_poll_enable_locked(struct drm_device *dev); #endif From 701dc207bf551d9fe6defa36e84a911e880398c3 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Wed, 11 Jan 2017 10:11:44 +0100 Subject: [PATCH 385/645] i2c: piix4: Avoid race conditions with IMC On AMD's SB800 and upwards, the SMBus is shared with the Integrated Micro Controller (IMC). The platform provides a hardware semaphore to avoid race conditions among them. (Check page 288 of the SB800-Series Southbridges Register Reference Guide http://support.amd.com/TechDocs/45482.pdf) Without this patch, many access to the SMBus end with an invalid transaction or even with the bus stalled. Reported-by: Alexandre Desnoyers Signed-off-by: Ricardo Ribalda Delgado Reviewed-by: Andy Shevchenko : Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-piix4.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index c2268cdf38e8..e34d82e79b98 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -585,10 +585,29 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, u8 command, int size, union i2c_smbus_data *data) { struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); + unsigned short piix4_smba = adapdata->smba; + int retries = MAX_TIMEOUT; + int smbslvcnt; u8 smba_en_lo; u8 port; int retval; + /* Request the SMBUS semaphore, avoid conflicts with the IMC */ + smbslvcnt = inb_p(SMBSLVCNT); + do { + outb_p(smbslvcnt | 0x10, SMBSLVCNT); + + /* Check the semaphore status */ + smbslvcnt = inb_p(SMBSLVCNT); + if (smbslvcnt & 0x10) + break; + + usleep_range(1000, 2000); + } while (--retries); + /* SMBus is still owned by the IMC, we give up */ + if (!retries) + return -EBUSY; + mutex_lock(&piix4_mutex_sb800); outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX); @@ -606,6 +625,9 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, mutex_unlock(&piix4_mutex_sb800); + /* Release the semaphore */ + outb_p(smbslvcnt | 0x20, SMBSLVCNT); + return retval; } From ea7a80858f57d8878b1499ea0f1b8a635cc48de7 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 11 Jan 2017 14:29:54 -0800 Subject: [PATCH 386/645] net: lwtunnel: Handle lwtunnel_fill_encap failure Handle failure in lwtunnel_fill_encap adding attributes to skb. Fixes: 571e722676fe ("ipv4: support for fib route lwtunnel encap attributes") Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/fib_semantics.c | 11 +++++++---- net/ipv6/route.c | 3 ++- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index eba1546b5031..9a375b908d01 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1279,8 +1279,9 @@ int fib_dump_info(struct sk_buff *skb, u32 portid, u32 seq, int event, nla_put_u32(skb, RTA_FLOW, fi->fib_nh[0].nh_tclassid)) goto nla_put_failure; #endif - if (fi->fib_nh->nh_lwtstate) - lwtunnel_fill_encap(skb, fi->fib_nh->nh_lwtstate); + if (fi->fib_nh->nh_lwtstate && + lwtunnel_fill_encap(skb, fi->fib_nh->nh_lwtstate) < 0) + goto nla_put_failure; } #ifdef CONFIG_IP_ROUTE_MULTIPATH if (fi->fib_nhs > 1) { @@ -1316,8 +1317,10 @@ int fib_dump_info(struct sk_buff *skb, u32 portid, u32 seq, int event, nla_put_u32(skb, RTA_FLOW, nh->nh_tclassid)) goto nla_put_failure; #endif - if (nh->nh_lwtstate) - lwtunnel_fill_encap(skb, nh->nh_lwtstate); + if (nh->nh_lwtstate && + lwtunnel_fill_encap(skb, nh->nh_lwtstate) < 0) + goto nla_put_failure; + /* length of rtnetlink header + attributes */ rtnh->rtnh_len = nlmsg_get_pos(skb) - (void *) rtnh; } endfor_nexthops(fi); diff --git a/net/ipv6/route.c b/net/ipv6/route.c index ce5aaf448c54..4f6b067c8753 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -3317,7 +3317,8 @@ static int rt6_fill_node(struct net *net, if (nla_put_u8(skb, RTA_PREF, IPV6_EXTRACT_PREF(rt->rt6i_flags))) goto nla_put_failure; - lwtunnel_fill_encap(skb, rt->dst.lwtstate); + if (lwtunnel_fill_encap(skb, rt->dst.lwtstate) < 0) + goto nla_put_failure; nlmsg_end(skb, nlh); return 0; From 994c5483e7f6dbf9fea622ba2031b9d868feb4b9 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 11 Jan 2017 16:45:51 -0600 Subject: [PATCH 387/645] net: qcom/emac: grab a reference to the phydev on ACPI systems Commit 6ffe1c4cd0a7 ("net: qcom/emac: fix of_node and phydev leaks") fixed the problem with reference leaks on phydev, but the fix is device-tree specific. When the driver unloads, the reference is dropped only on DT systems. Instead, it's cleaner if up grab an reference on ACPI systems. When the driver unloads, we can drop the reference without having to check whether we're on a DT system. Signed-off-by: Timur Tabi Reviewed-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-phy.c | 7 +++++++ drivers/net/ethernet/qualcomm/emac/emac.c | 6 ++---- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-phy.c b/drivers/net/ethernet/qualcomm/emac/emac-phy.c index 99a14df28b96..2851b4c56570 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-phy.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-phy.c @@ -201,6 +201,13 @@ int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt) else adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr); + /* of_phy_find_device() claims a reference to the phydev, + * so we do that here manually as well. When the driver + * later unloads, it can unilaterally drop the reference + * without worrying about ACPI vs DT. + */ + if (adpt->phydev) + get_device(&adpt->phydev->mdio.dev); } else { struct device_node *phy_np; diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c b/drivers/net/ethernet/qualcomm/emac/emac.c index 422289c232bc..f46d300bd585 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac.c @@ -719,8 +719,7 @@ static int emac_probe(struct platform_device *pdev) err_undo_napi: netif_napi_del(&adpt->rx_q.napi); err_undo_mdiobus: - if (!has_acpi_companion(&pdev->dev)) - put_device(&adpt->phydev->mdio.dev); + put_device(&adpt->phydev->mdio.dev); mdiobus_unregister(adpt->mii_bus); err_undo_clocks: emac_clks_teardown(adpt); @@ -740,8 +739,7 @@ static int emac_remove(struct platform_device *pdev) emac_clks_teardown(adpt); - if (!has_acpi_companion(&pdev->dev)) - put_device(&adpt->phydev->mdio.dev); + put_device(&adpt->phydev->mdio.dev); mdiobus_unregister(adpt->mii_bus); free_netdev(netdev); From 8a430ed50bb1b19ca14a46661f3b1b35f2fb5c39 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 11 Jan 2017 15:42:17 -0800 Subject: [PATCH 388/645] net: ipv4: fix table id in getroute response rtm_table is an 8-bit field while table ids are allowed up to u32. Commit 709772e6e065 ("net: Fix routing tables with id > 255 for legacy software") added the preference to set rtm_table in dumps to RT_TABLE_COMPAT if the table id is > 255. The table id returned on get route requests should do the same. Fixes: c36ba6603a11 ("net: Allow user to get table id from route lookup") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 0fcac8e7a2b2..709ffe67d1de 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2472,7 +2472,7 @@ static int rt_fill_info(struct net *net, __be32 dst, __be32 src, u32 table_id, r->rtm_dst_len = 32; r->rtm_src_len = 0; r->rtm_tos = fl4->flowi4_tos; - r->rtm_table = table_id; + r->rtm_table = table_id < 256 ? table_id : RT_TABLE_COMPAT; if (nla_put_u32(skb, RTA_TABLE, table_id)) goto nla_put_failure; r->rtm_type = rt->rt_type; From 2dfc61736482441993bfb7dfaa971113b53f107c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jan 2017 08:47:00 -0500 Subject: [PATCH 389/645] NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created We don't want to invalidate the directory attribute and data cache unless we know that a file was created, or the change attribute differs from the one in our cache. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 700ed1fc1075..4010c33151ad 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2390,11 +2390,12 @@ static int _nfs4_proc_open(struct nfs4_opendata *data) nfs_fattr_map_and_free_names(server, &data->f_attr); if (o_arg->open_flags & O_CREAT) { - update_changeattr(dir, &o_res->cinfo); if (o_arg->open_flags & O_EXCL) data->file_created = 1; else if (o_res->cinfo.before != o_res->cinfo.after) data->file_created = 1; + if (data->file_created || dir->i_version != o_res->cinfo.after) + update_changeattr(dir, &o_res->cinfo); } if ((o_res->rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) == 0) server->caps &= ~NFS_CAP_POSIX_LOCK; From c733c49c32624f927f443be6dbabb387006bbe42 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jan 2017 12:32:26 -0500 Subject: [PATCH 390/645] NFSv4: Don't apply change_info4 twice on rename within a directory If a file is renamed, but stays in the same directory, we will still receive 2 change_info4 structures describing the change to that directory, but we only want to apply it once. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 4010c33151ad..1e797bf74aaf 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4159,8 +4159,11 @@ static int nfs4_proc_rename_done(struct rpc_task *task, struct inode *old_dir, if (nfs4_async_handle_error(task, res->server, NULL, &data->timeout) == -EAGAIN) return 0; - update_changeattr(old_dir, &res->old_cinfo); - update_changeattr(new_dir, &res->new_cinfo); + if (task->tk_status == 0) { + update_changeattr(old_dir, &res->old_cinfo); + if (new_dir != old_dir) + update_changeattr(new_dir, &res->new_cinfo); + } return 1; } From c40d52fe1c2ba25dcb8cd207c8d26ef5f57f0476 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jan 2017 12:36:11 -0500 Subject: [PATCH 391/645] NFSv4: Don't call update_changeattr() unless the unlink is successful If the unlink wasn't successful, then the directory has presumably not changed. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 1e797bf74aaf..6a35204affa4 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4125,7 +4125,8 @@ static int nfs4_proc_unlink_done(struct rpc_task *task, struct inode *dir) if (nfs4_async_handle_error(task, res->server, NULL, &data->timeout) == -EAGAIN) return 0; - update_changeattr(dir, &res->cinfo); + if (task->tk_status == 0) + update_changeattr(dir, &res->cinfo); return 1; } From d3129ef672cac81c4d0185336af377c8dc1091d3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jan 2017 22:07:28 -0500 Subject: [PATCH 392/645] NFSv4: update_changeattr should update the attribute timestamp Otherwise, the attribute cache remains marked as being expired. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6a35204affa4..ecc151697fd4 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1082,7 +1082,8 @@ int nfs4_call_sync(struct rpc_clnt *clnt, return nfs4_call_sync_sequence(clnt, server, msg, args, res); } -static void update_changeattr(struct inode *dir, struct nfs4_change_info *cinfo) +static void update_changeattr(struct inode *dir, struct nfs4_change_info *cinfo, + unsigned long timestamp) { struct nfs_inode *nfsi = NFS_I(dir); @@ -1098,6 +1099,7 @@ static void update_changeattr(struct inode *dir, struct nfs4_change_info *cinfo) NFS_INO_INVALID_ACL; } dir->i_version = cinfo->after; + nfsi->read_cache_jiffies = timestamp; nfsi->attr_gencount = nfs_inc_attr_generation_counter(); nfs_fscache_invalidate(dir); spin_unlock(&dir->i_lock); @@ -2395,7 +2397,8 @@ static int _nfs4_proc_open(struct nfs4_opendata *data) else if (o_res->cinfo.before != o_res->cinfo.after) data->file_created = 1; if (data->file_created || dir->i_version != o_res->cinfo.after) - update_changeattr(dir, &o_res->cinfo); + update_changeattr(dir, &o_res->cinfo, + o_res->f_attr->time_start); } if ((o_res->rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) == 0) server->caps &= ~NFS_CAP_POSIX_LOCK; @@ -4073,11 +4076,12 @@ static int _nfs4_proc_remove(struct inode *dir, const struct qstr *name) .rpc_argp = &args, .rpc_resp = &res, }; + unsigned long timestamp = jiffies; int status; status = nfs4_call_sync(server->client, server, &msg, &args.seq_args, &res.seq_res, 1); if (status == 0) - update_changeattr(dir, &res.cinfo); + update_changeattr(dir, &res.cinfo, timestamp); return status; } @@ -4126,7 +4130,7 @@ static int nfs4_proc_unlink_done(struct rpc_task *task, struct inode *dir) &data->timeout) == -EAGAIN) return 0; if (task->tk_status == 0) - update_changeattr(dir, &res->cinfo); + update_changeattr(dir, &res->cinfo, res->dir_attr->time_start); return 1; } @@ -4161,9 +4165,9 @@ static int nfs4_proc_rename_done(struct rpc_task *task, struct inode *old_dir, return 0; if (task->tk_status == 0) { - update_changeattr(old_dir, &res->old_cinfo); + update_changeattr(old_dir, &res->old_cinfo, res->old_fattr->time_start); if (new_dir != old_dir) - update_changeattr(new_dir, &res->new_cinfo); + update_changeattr(new_dir, &res->new_cinfo, res->new_fattr->time_start); } return 1; } @@ -4201,7 +4205,7 @@ static int _nfs4_proc_link(struct inode *inode, struct inode *dir, const struct status = nfs4_call_sync(server->client, server, &msg, &arg.seq_args, &res.seq_res, 1); if (!status) { - update_changeattr(dir, &res.cinfo); + update_changeattr(dir, &res.cinfo, res.fattr->time_start); status = nfs_post_op_update_inode(inode, res.fattr); if (!status) nfs_setsecurity(inode, res.fattr, res.label); @@ -4276,7 +4280,8 @@ static int nfs4_do_create(struct inode *dir, struct dentry *dentry, struct nfs4_ int status = nfs4_call_sync(NFS_SERVER(dir)->client, NFS_SERVER(dir), &data->msg, &data->arg.seq_args, &data->res.seq_res, 1); if (status == 0) { - update_changeattr(dir, &data->res.dir_cinfo); + update_changeattr(dir, &data->res.dir_cinfo, + data->res.fattr->time_start); status = nfs_instantiate(dentry, data->res.fh, data->res.fattr, data->res.label); } return status; From dcd208697707b12adeaa45643bab239c5e90ef9b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Wed, 11 Jan 2017 20:34:50 -0500 Subject: [PATCH 393/645] nfsd: fix supported attributes for acl & labels Oops--in 916d2d844afd I moved some constants into an array for convenience, but here I'm accidentally writing to that array. The effect is that if you ever encounter a filesystem lacking support for ACLs or security labels, then all queries of supported attributes will report that attribute as unsupported from then on. Fixes: 916d2d844afd "nfsd: clean up supported attribute handling" Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4xdr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index 7ecf16be4a44..8fae53ce21d1 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -2440,7 +2440,9 @@ nfsd4_encode_fattr(struct xdr_stream *xdr, struct svc_fh *fhp, p++; /* to be backfilled later */ if (bmval0 & FATTR4_WORD0_SUPPORTED_ATTRS) { - u32 *supp = nfsd_suppattrs[minorversion]; + u32 supp[3]; + + memcpy(supp, nfsd_suppattrs[minorversion], sizeof(supp)); if (!IS_POSIXACL(dentry->d_inode)) supp[0] &= ~FATTR4_WORD0_ACL; From 78794d1890708cf94e3961261e52dcec2cc34722 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 9 Jan 2017 17:15:18 -0500 Subject: [PATCH 394/645] svcrpc: don't leak contexts on PROC_DESTROY Context expiry times are in units of seconds since boot, not unix time. The use of get_seconds() here therefore sets the expiry time decades in the future. This prevents timely freeing of contexts destroyed by client RPC_GSS_PROC_DESTROY requests. We'd still free them eventually (when the module is unloaded or the container shut down), but a lot of contexts could pile up before then. Cc: stable@vger.kernel.org Fixes: c5b29f885afe "sunrpc: use seconds since boot in expiry cache" Reported-by: Andy Adamson Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/svcauth_gss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 886e9d381771..153082598522 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1489,7 +1489,7 @@ svcauth_gss_accept(struct svc_rqst *rqstp, __be32 *authp) case RPC_GSS_PROC_DESTROY: if (gss_write_verf(rqstp, rsci->mechctx, gc->gc_seq)) goto auth_err; - rsci->h.expiry_time = get_seconds(); + rsci->h.expiry_time = seconds_since_boot(); set_bit(CACHE_NEGATIVE, &rsci->h.flags); if (resv->iov_len + 4 > PAGE_SIZE) goto drop; From 546125d1614264d26080817d0c8cddb9b25081fa Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Thu, 5 Jan 2017 16:34:51 -0500 Subject: [PATCH 395/645] sunrpc: don't call sleeping functions from the notifier block callbacks The inet6addr_chain is an atomic notifier chain, so we can't call anything that might sleep (like lock_sock)... instead of closing the socket from svc_age_temp_xprts_now (which is called by the notifier function), just have the rpc service threads do it instead. Cc: stable@vger.kernel.org Fixes: c3d4879e01be "sunrpc: Add a function to close..." Signed-off-by: Scott Mayhew Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_xprt.h | 1 + net/sunrpc/svc_xprt.c | 10 +++++++--- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index e5d193440374..7440290f64ac 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -66,6 +66,7 @@ struct svc_xprt { #define XPT_LISTENER 10 /* listening endpoint */ #define XPT_CACHE_AUTH 11 /* cache auth info */ #define XPT_LOCAL 12 /* connection from loopback interface */ +#define XPT_KILL_TEMP 13 /* call xpo_kill_temp_xprt before closing */ struct svc_serv *xpt_server; /* service for transport */ atomic_t xpt_reserved; /* space on outq that is rsvd */ diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 3bc1d61694cb..9c9db55a0c1e 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -799,6 +799,8 @@ static int svc_handle_xprt(struct svc_rqst *rqstp, struct svc_xprt *xprt) if (test_bit(XPT_CLOSE, &xprt->xpt_flags)) { dprintk("svc_recv: found XPT_CLOSE\n"); + if (test_and_clear_bit(XPT_KILL_TEMP, &xprt->xpt_flags)) + xprt->xpt_ops->xpo_kill_temp_xprt(xprt); svc_delete_xprt(xprt); /* Leave XPT_BUSY set on the dead xprt: */ goto out; @@ -1020,9 +1022,11 @@ void svc_age_temp_xprts_now(struct svc_serv *serv, struct sockaddr *server_addr) le = to_be_closed.next; list_del_init(le); xprt = list_entry(le, struct svc_xprt, xpt_list); - dprintk("svc_age_temp_xprts_now: closing %p\n", xprt); - xprt->xpt_ops->xpo_kill_temp_xprt(xprt); - svc_close_xprt(xprt); + set_bit(XPT_CLOSE, &xprt->xpt_flags); + set_bit(XPT_KILL_TEMP, &xprt->xpt_flags); + dprintk("svc_age_temp_xprts_now: queuing xprt %p for closing\n", + xprt); + svc_xprt_enqueue(xprt); } } EXPORT_SYMBOL_GPL(svc_age_temp_xprts_now); From 05a974efa4bdf6e2a150e3f27dc6fcf0a9ad5655 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 15 Dec 2016 18:40:14 +0100 Subject: [PATCH 396/645] ieee802154: atusb: do not use the stack for buffers to make them DMA able From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes the buffers already being present in time of 4.9 being released. This should go into stable as well. Reported-by: Dan Carpenter Cc: stable@vger.kernel.org Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/atusb.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 1253f864737a..fa3e8c34b26c 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -117,13 +117,26 @@ static int atusb_read_reg(struct atusb *atusb, uint8_t reg) { struct usb_device *usb_dev = atusb->usb_dev; int ret; + uint8_t *buffer; uint8_t value; + buffer = kmalloc(1, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + dev_dbg(&usb_dev->dev, "atusb: reg = 0x%x\n", reg); ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_REG_READ, ATUSB_REQ_FROM_DEV, - 0, reg, &value, 1, 1000); - return ret >= 0 ? value : ret; + 0, reg, buffer, 1, 1000); + + if (ret >= 0) { + value = buffer[0]; + kfree(buffer); + return value; + } else { + kfree(buffer); + return ret; + } } static int atusb_write_subreg(struct atusb *atusb, uint8_t reg, uint8_t mask, @@ -608,9 +621,13 @@ static const struct ieee802154_ops atusb_ops = { static int atusb_get_and_show_revision(struct atusb *atusb) { struct usb_device *usb_dev = atusb->usb_dev; - unsigned char buffer[3]; + unsigned char *buffer; int ret; + buffer = kmalloc(3, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + /* Get a couple of the ATMega Firmware values */ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0, @@ -631,15 +648,20 @@ static int atusb_get_and_show_revision(struct atusb *atusb) dev_info(&usb_dev->dev, "Please update to version 0.2 or newer"); } + kfree(buffer); return ret; } static int atusb_get_and_show_build(struct atusb *atusb) { struct usb_device *usb_dev = atusb->usb_dev; - char build[ATUSB_BUILD_SIZE + 1]; + char *build; int ret; + build = kmalloc(ATUSB_BUILD_SIZE + 1, GFP_KERNEL); + if (!build) + return -ENOMEM; + ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000); @@ -648,6 +670,7 @@ static int atusb_get_and_show_build(struct atusb *atusb) dev_info(&usb_dev->dev, "Firmware: build %s\n", build); } + kfree(build); return ret; } From 2fd2b550a5ed13b1d6640ff77630fc369636a544 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 15 Dec 2016 18:40:15 +0100 Subject: [PATCH 397/645] ieee802154: atusb: make sure we set a randaom extended address if fetching fails In the unlikely case were the firmware is new enough but the actual USB command still fails make sure we set a random address and return. Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/atusb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index fa3e8c34b26c..67790f88908d 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -737,8 +737,11 @@ static int atusb_set_extended_addr(struct atusb *atusb) ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0, buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000); - if (ret < 0) - dev_err(&usb_dev->dev, "failed to fetch extended address\n"); + if (ret < 0) { + dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n"); + ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); + return ret; + } memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN); /* Check if read address is not empty and the unicast bit is set correctly */ From 5eb35a6ccea61648a55713c076ab65423eea1ac0 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 15 Dec 2016 18:40:16 +0100 Subject: [PATCH 398/645] ieee802154: atusb: do not use the stack for address fetching to make it DMA able From 4.9 we should really avoid using the stack here as this will not be DMA able on various platforms. This changes a buffer that was introduced in the 4.10 merge window. Fixes: 6cc33eba232c ("ieee802154: atusb: try to read permanent extended address from device") Reported-by: Dan Carpenter Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/atusb.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 67790f88908d..63cb67917a07 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -721,7 +721,7 @@ fail: static int atusb_set_extended_addr(struct atusb *atusb) { struct usb_device *usb_dev = atusb->usb_dev; - unsigned char buffer[IEEE802154_EXTENDED_ADDR_LEN]; + unsigned char *buffer; __le64 extended_addr; u64 addr; int ret; @@ -733,6 +733,10 @@ static int atusb_set_extended_addr(struct atusb *atusb) return 0; } + buffer = kmalloc(IEEE802154_EXTENDED_ADDR_LEN, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + /* Firmware is new enough so we fetch the address from EEPROM */ ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0, @@ -740,6 +744,7 @@ static int atusb_set_extended_addr(struct atusb *atusb) if (ret < 0) { dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n"); ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); + kfree(buffer); return ret; } @@ -755,6 +760,7 @@ static int atusb_set_extended_addr(struct atusb *atusb) &addr); } + kfree(buffer); return ret; } From f301606934b240fb54d8edf3618a0483e36046fc Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Sun, 18 Dec 2016 15:25:33 -0800 Subject: [PATCH 399/645] at86rf230: Allow slow GPIO pins for "rstn" Driver code never touches "rstn" signal in atomic context, so there's no need to implicitly put such restriction on it by using gpio_set_value to manipulate it. Replace gpio_set_value to gpio_set_value_cansleep to fix that. As a an example of where such restriction might be inconvenient, consider a hardware design where "rstn" is connected to a pin of I2C/SPI GPIO expander chip. Cc: Chris Healy Signed-off-by: Andrey Smirnov Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 46d53a6c8cf8..76ba7ecfe142 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1715,9 +1715,9 @@ static int at86rf230_probe(struct spi_device *spi) /* Reset */ if (gpio_is_valid(rstn)) { udelay(1); - gpio_set_value(rstn, 0); + gpio_set_value_cansleep(rstn, 0); udelay(1); - gpio_set_value(rstn, 1); + gpio_set_value_cansleep(rstn, 1); usleep_range(120, 240); } From 8e38b7d4d71479b23b77f01cf0e5071610b8f357 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Mon, 2 Jan 2017 16:58:13 +0100 Subject: [PATCH 400/645] ieee802154: atusb: fix driver to work with older firmware versions After the addition of the frame_retries callback we could run into cases where a ATUSB device with an older firmware version would now longer be able to bring the interface up. We keep this functionality disabled now if the minimum firmware version for this feature is not available. Fixes: 5d82288b93db3bc ("ieee802154: atusb: implement .set_frame_retries ops callback") Reported-by: Alexander Aring Acked-by: Alexander Aring Signed-off-by: Stefan Schmidt Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/atusb.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 63cb67917a07..ef688518ad77 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -562,13 +562,6 @@ static int atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries) { struct atusb *atusb = hw->priv; - struct device *dev = &atusb->usb_dev->dev; - - if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) { - dev_info(dev, "Automatic frame retransmission is only available from " - "firmware version 0.3. Please update if you want this feature."); - return -EINVAL; - } return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries); } @@ -802,8 +795,7 @@ static int atusb_probe(struct usb_interface *interface, hw->parent = &usb_dev->dev; hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT | - IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS | - IEEE802154_HW_FRAME_RETRIES; + IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS; hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL | WPAN_PHY_FLAG_CCA_MODE; @@ -832,6 +824,9 @@ static int atusb_probe(struct usb_interface *interface, atusb_get_and_show_build(atusb); atusb_set_extended_addr(atusb); + if (atusb->fw_ver_maj >= 0 && atusb->fw_ver_min >= 3) + hw->flags |= IEEE802154_HW_FRAME_RETRIES; + ret = atusb_get_and_clear_error(atusb); if (ret) { dev_err(&atusb->usb_dev->dev, From ce1ca7d2d140a1f4aaffd297ac487f246963dd2f Mon Sep 17 00:00:00 2001 From: Sriharsha Basavapatna Date: Mon, 9 Jan 2017 16:00:44 +0530 Subject: [PATCH 401/645] svcrdma: avoid duplicate dma unmapping during error recovery In rdma_read_chunk_frmr() when ib_post_send() fails, the error code path invokes ib_dma_unmap_sg() to unmap the sg list. It then invokes svc_rdma_put_frmr() which in turn tries to unmap the same sg list through ib_dma_unmap_sg() again. This second unmap is invalid and could lead to problems when the iova being unmapped is subsequently reused. Remove the call to unmap in rdma_read_chunk_frmr() and let svc_rdma_put_frmr() handle it. Fixes: 412a15c0fe53 ("svcrdma: Port to new memory registration API") Cc: stable@vger.kernel.org Signed-off-by: Sriharsha Basavapatna Reviewed-by: Chuck Lever Reviewed-by: Yuval Shaia Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c index 57d35fbb1c28..172b537f8cfc 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c +++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c @@ -347,8 +347,6 @@ int rdma_read_chunk_frmr(struct svcxprt_rdma *xprt, atomic_inc(&rdma_stat_read); return ret; err: - ib_dma_unmap_sg(xprt->sc_cm_id->device, - frmr->sg, frmr->sg_nents, frmr->direction); svc_rdma_put_context(ctxt, 0); svc_rdma_put_frmr(xprt, frmr); return ret; From 36b29eb30ee0f6c99f06bea406c23a3fd4cbb80b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 12 Jan 2017 14:53:41 +0000 Subject: [PATCH 402/645] soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe() Fix to return a negative error code from the kthread_run() error handling case instead of 0, as done elsewhere in this function. Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver") Signed-off-by: Wei Yongjun Signed-off-by: Tony Lindgren --- drivers/soc/ti/wkup_m3_ipc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c index 8823cc81ae45..5bb376009d98 100644 --- a/drivers/soc/ti/wkup_m3_ipc.c +++ b/drivers/soc/ti/wkup_m3_ipc.c @@ -459,6 +459,7 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev) if (IS_ERR(task)) { dev_err(dev, "can't create rproc_boot thread\n"); + ret = PTR_ERR(task); goto err_put_rproc; } From 7aa4865506a26c607e00bd9794a85785b55ebca7 Mon Sep 17 00:00:00 2001 From: Vadim Lomovtsev Date: Thu, 12 Jan 2017 07:28:06 -0800 Subject: [PATCH 403/645] net: thunderx: acpi: fix LMAC initialization While probing BGX we requesting appropriate QLM for it's configuration and get LMAC count by that request. Then, while reading configured MAC values from SSDT table we need to save them in proper mapping: BGX[i]->lmac[j].mac = to later provide for initialization stuff. In order to fill such mapping properly we need to add lmac index to be used while acpi initialization since at this moment bgx->lmac_count already contains actual value. Signed-off-by: Vadim Lomovtsev Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 9211c750e064..2f85b64f01fa 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -47,8 +47,9 @@ struct lmac { struct bgx { u8 bgx_id; struct lmac lmac[MAX_LMAC_PER_BGX]; - int lmac_count; + u8 lmac_count; u8 max_lmac; + u8 acpi_lmac_idx; void __iomem *reg_base; struct pci_dev *pdev; bool is_dlm; @@ -1143,13 +1144,13 @@ static acpi_status bgx_acpi_register_phy(acpi_handle handle, if (acpi_bus_get_device(handle, &adev)) goto out; - acpi_get_mac_address(dev, adev, bgx->lmac[bgx->lmac_count].mac); + acpi_get_mac_address(dev, adev, bgx->lmac[bgx->acpi_lmac_idx].mac); - SET_NETDEV_DEV(&bgx->lmac[bgx->lmac_count].netdev, dev); + SET_NETDEV_DEV(&bgx->lmac[bgx->acpi_lmac_idx].netdev, dev); - bgx->lmac[bgx->lmac_count].lmacid = bgx->lmac_count; + bgx->lmac[bgx->acpi_lmac_idx].lmacid = bgx->acpi_lmac_idx; + bgx->acpi_lmac_idx++; /* move to next LMAC */ out: - bgx->lmac_count++; return AE_OK; } From 8e2329ead748a85f4ae103d71a0575ef364c30a0 Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Thu, 12 Jan 2017 16:24:43 +0530 Subject: [PATCH 404/645] ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node Fix a typo in impedance setting for ethernet-phy@3 Fixes: b76db38cd8ae ("ARM: dts: dra72-evm-revc: add phy impedance settings") Cc: Mugunthan V N Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm-revc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index c3d939c9666c..3f808a47df03 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -75,6 +75,6 @@ ti,rx-internal-delay = ; ti,tx-internal-delay = ; ti,fifo-depth = ; - ti,min-output-imepdance; + ti,min-output-impedance; }; }; From ef736d394e85b1bf1fd65ba5e5257b85f6c82325 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 20 Dec 2016 16:35:50 -0500 Subject: [PATCH 405/645] drm/radeon/si: load special ucode for certain MC configs Special MC ucode is required for these memory configurations. Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index e8a38d296855..32d55220a2d3 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -115,6 +115,8 @@ MODULE_FIRMWARE("radeon/hainan_rlc.bin"); MODULE_FIRMWARE("radeon/hainan_smc.bin"); MODULE_FIRMWARE("radeon/hainan_k_smc.bin"); +MODULE_FIRMWARE("radeon/si58_mc.bin"); + static u32 si_get_cu_active_bitmap(struct radeon_device *rdev, u32 se, u32 sh); static void si_pcie_gen3_enable(struct radeon_device *rdev); static void si_program_aspm(struct radeon_device *rdev); @@ -1650,6 +1652,7 @@ static int si_init_microcode(struct radeon_device *rdev) int err; int new_fw = 0; bool new_smc = false; + bool si58_fw = false; DRM_DEBUG("\n"); @@ -1742,6 +1745,10 @@ static int si_init_microcode(struct radeon_device *rdev) default: BUG(); } + /* this memory configuration requires special firmware */ + if (((RREG32(MC_SEQ_MISC0) & 0xff000000) >> 24) == 0x58) + si58_fw = true; + DRM_INFO("Loading %s Microcode\n", new_chip_name); snprintf(fw_name, sizeof(fw_name), "radeon/%s_pfp.bin", new_chip_name); @@ -1845,7 +1852,10 @@ static int si_init_microcode(struct radeon_device *rdev) } } - snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", new_chip_name); + if (si58_fw) + snprintf(fw_name, sizeof(fw_name), "radeon/si58_mc.bin"); + else + snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", new_chip_name); err = request_firmware(&rdev->mc_fw, fw_name, rdev->dev); if (err) { snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc2.bin", chip_name); From f1d877be65d36806c581c32b4687d4acefa55960 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 20 Dec 2016 16:40:48 -0500 Subject: [PATCH 406/645] drm/amdgpu/si: load special ucode for certain MC configs Special MC ucode is required for these memory configurations. Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c index 45a573e63d4a..920960089f27 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c @@ -44,6 +44,7 @@ MODULE_FIRMWARE("radeon/tahiti_mc.bin"); MODULE_FIRMWARE("radeon/pitcairn_mc.bin"); MODULE_FIRMWARE("radeon/verde_mc.bin"); MODULE_FIRMWARE("radeon/oland_mc.bin"); +MODULE_FIRMWARE("radeon/si58_mc.bin"); #define MC_SEQ_MISC0__MT__MASK 0xf0000000 #define MC_SEQ_MISC0__MT__GDDR1 0x10000000 @@ -113,6 +114,7 @@ static int gmc_v6_0_init_microcode(struct amdgpu_device *adev) const char *chip_name; char fw_name[30]; int err; + bool is_58_fw = false; DRM_DEBUG("\n"); @@ -135,7 +137,14 @@ static int gmc_v6_0_init_microcode(struct amdgpu_device *adev) default: BUG(); } - snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name); + /* this memory configuration requires special firmware */ + if (((RREG32(mmMC_SEQ_MISC0) & 0xff000000) >> 24) == 0x58) + is_58_fw = true; + + if (is_58_fw) + snprintf(fw_name, sizeof(fw_name), "radeon/si58_mc.bin"); + else + snprintf(fw_name, sizeof(fw_name), "radeon/%s_mc.bin", chip_name); err = request_firmware(&adev->mc.fw, fw_name, adev->dev); if (err) goto out; From 89d5595a6f53eba4d274c1d577d649db47620601 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Jan 2017 13:04:47 -0500 Subject: [PATCH 407/645] drm/amdgpu: drop oland quirks Fixed by the new 58 MC firmware. Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 10bedfac27b8..34cb7ea17caf 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -3487,17 +3487,6 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, (adev->pdev->device == 0x6817) || (adev->pdev->device == 0x6806)) max_mclk = 120000; - } else if (adev->asic_type == CHIP_OLAND) { - if ((adev->pdev->revision == 0xC7) || - (adev->pdev->revision == 0x80) || - (adev->pdev->revision == 0x81) || - (adev->pdev->revision == 0x83) || - (adev->pdev->revision == 0x87) || - (adev->pdev->device == 0x6604) || - (adev->pdev->device == 0x6605)) { - max_sclk = 75000; - max_mclk = 80000; - } } else if (adev->asic_type == CHIP_HAINAN) { if ((adev->pdev->revision == 0x81) || (adev->pdev->revision == 0x83) || From 5cc6f520ace3aa0086747e08417c2627374af1d7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Jan 2017 13:05:52 -0500 Subject: [PATCH 408/645] drm/amdgpu: drop the mclk quirk for hainan fixed by the new 58 mc firmware. Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 34cb7ea17caf..e9242d6fbf84 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -3495,7 +3495,6 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, (adev->pdev->device == 0x6665) || (adev->pdev->device == 0x6667)) { max_sclk = 75000; - max_mclk = 80000; } } /* Apply dpm quirks */ From 3a69adfe5617ceba04ad3cff0f9ccad470503fb2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Jan 2017 13:07:14 -0500 Subject: [PATCH 409/645] drm/radeon: drop oland quirks Fixed by the new 58 MC firmware. Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si_dpm.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 13ba73fd9b68..668060fa68c1 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -3008,17 +3008,6 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, (rdev->pdev->device == 0x6817) || (rdev->pdev->device == 0x6806)) max_mclk = 120000; - } else if (rdev->family == CHIP_OLAND) { - if ((rdev->pdev->revision == 0xC7) || - (rdev->pdev->revision == 0x80) || - (rdev->pdev->revision == 0x81) || - (rdev->pdev->revision == 0x83) || - (rdev->pdev->revision == 0x87) || - (rdev->pdev->device == 0x6604) || - (rdev->pdev->device == 0x6605)) { - max_sclk = 75000; - max_mclk = 80000; - } } else if (rdev->family == CHIP_HAINAN) { if ((rdev->pdev->revision == 0x81) || (rdev->pdev->revision == 0x83) || From a628392cf03e0eef21b345afbb192cbade041741 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Jan 2017 13:08:01 -0500 Subject: [PATCH 410/645] drm/radeon: drop the mclk quirk for hainan fixed by the new 58 mc firmware. Acked-by: Edward O'Callaghan Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si_dpm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 668060fa68c1..2944916f7102 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -3016,7 +3016,6 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, (rdev->pdev->device == 0x6665) || (rdev->pdev->device == 0x6667)) { max_sclk = 75000; - max_mclk = 80000; } } /* Apply dpm quirks */ From 3731d12dce83d47b357753ffc450ce03f1b49688 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 10 Jan 2017 19:26:49 +0800 Subject: [PATCH 411/645] drm/amd/powerplay: fix vce cg logic error on CZ/St. can fix Bug 191281: vce ib test failed. when vce idle, set vce clock gate, so the clock in vce domain will be disabled. when need to encode, disable vce clock gate, enable the clocks to vce engine. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/cz_clockpowergating.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/cz_clockpowergating.c b/drivers/gpu/drm/amd/powerplay/hwmgr/cz_clockpowergating.c index b0c63c5f54c9..6bb79c94cb9f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/cz_clockpowergating.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/cz_clockpowergating.c @@ -200,7 +200,7 @@ int cz_dpm_powergate_vce(struct pp_hwmgr *hwmgr, bool bgate) cgs_set_clockgating_state( hwmgr->device, AMD_IP_BLOCK_TYPE_VCE, - AMD_CG_STATE_UNGATE); + AMD_CG_STATE_GATE); cgs_set_powergating_state( hwmgr->device, AMD_IP_BLOCK_TYPE_VCE, @@ -218,7 +218,7 @@ int cz_dpm_powergate_vce(struct pp_hwmgr *hwmgr, bool bgate) cgs_set_clockgating_state( hwmgr->device, AMD_IP_BLOCK_TYPE_VCE, - AMD_PG_STATE_GATE); + AMD_PG_STATE_UNGATE); cz_dpm_update_vce_dpm(hwmgr); cz_enable_disable_vce_dpm(hwmgr, true); return 0; From a844764751275e0e5d381958e3c7e6e0fe739e25 Mon Sep 17 00:00:00 2001 From: Flora Cui Date: Tue, 10 Jan 2017 10:50:30 +0800 Subject: [PATCH 412/645] drm/amdgpu: fix vm_fault_stop on gfx6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Flora Cui Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c index 920960089f27..e2b0b1646f99 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c @@ -472,19 +472,11 @@ static int gmc_v6_0_gart_enable(struct amdgpu_device *adev) WREG32(mmVM_CONTEXT1_CNTL, VM_CONTEXT1_CNTL__ENABLE_CONTEXT_MASK | (1UL << VM_CONTEXT1_CNTL__PAGE_TABLE_DEPTH__SHIFT) | - ((amdgpu_vm_block_size - 9) << VM_CONTEXT1_CNTL__PAGE_TABLE_BLOCK_SIZE__SHIFT) | - VM_CONTEXT1_CNTL__RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT_MASK | - VM_CONTEXT1_CNTL__RANGE_PROTECTION_FAULT_ENABLE_DEFAULT_MASK | - VM_CONTEXT1_CNTL__DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT_MASK | - VM_CONTEXT1_CNTL__DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT_MASK | - VM_CONTEXT1_CNTL__PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT_MASK | - VM_CONTEXT1_CNTL__PDE0_PROTECTION_FAULT_ENABLE_DEFAULT_MASK | - VM_CONTEXT1_CNTL__VALID_PROTECTION_FAULT_ENABLE_INTERRUPT_MASK | - VM_CONTEXT1_CNTL__VALID_PROTECTION_FAULT_ENABLE_DEFAULT_MASK | - VM_CONTEXT1_CNTL__READ_PROTECTION_FAULT_ENABLE_INTERRUPT_MASK | - VM_CONTEXT1_CNTL__READ_PROTECTION_FAULT_ENABLE_DEFAULT_MASK | - VM_CONTEXT1_CNTL__WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT_MASK | - VM_CONTEXT1_CNTL__WRITE_PROTECTION_FAULT_ENABLE_DEFAULT_MASK); + ((amdgpu_vm_block_size - 9) << VM_CONTEXT1_CNTL__PAGE_TABLE_BLOCK_SIZE__SHIFT)); + if (amdgpu_vm_fault_stop == AMDGPU_VM_FAULT_STOP_ALWAYS) + gmc_v6_0_set_fault_enable_default(adev, false); + else + gmc_v6_0_set_fault_enable_default(adev, true); gmc_v6_0_gart_flush_gpu_tlb(adev, 0); dev_info(adev->dev, "PCIE GART of %uM enabled (table at 0x%016llX).\n", @@ -763,7 +755,10 @@ static int gmc_v6_0_late_init(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0); + if (amdgpu_vm_fault_stop != AMDGPU_VM_FAULT_STOP_ALWAYS) + return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0); + else + return 0; } static int gmc_v6_0_sw_init(void *handle) From ab8db87b8256e13a62f10af1d32f5fc233c398cc Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 10 Jan 2017 15:47:50 +0800 Subject: [PATCH 413/645] drm/amd/powerplay: refine vce dpm update code on Cz. Program HardMin based on the vce_arbiter.ecclk if ecclk is 0, disable ECLK DPM 0. Otherwise VCE could hang if switching SCLK from DPM 0 to 6/7 Signed-off-by: Rex Zhu Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c | 24 ++++++++++++------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c index 4b14f259a147..0fb4e8c8f5e1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/cz_hwmgr.c @@ -1402,14 +1402,22 @@ int cz_dpm_update_vce_dpm(struct pp_hwmgr *hwmgr) cz_hwmgr->vce_dpm.hard_min_clk, PPSMC_MSG_SetEclkHardMin)); } else { - /*EPR# 419220 -HW limitation to to */ - cz_hwmgr->vce_dpm.hard_min_clk = hwmgr->vce_arbiter.ecclk; - smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, - PPSMC_MSG_SetEclkHardMin, - cz_get_eclk_level(hwmgr, - cz_hwmgr->vce_dpm.hard_min_clk, - PPSMC_MSG_SetEclkHardMin)); - + /*Program HardMin based on the vce_arbiter.ecclk */ + if (hwmgr->vce_arbiter.ecclk == 0) { + smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetEclkHardMin, 0); + /* disable ECLK DPM 0. Otherwise VCE could hang if + * switching SCLK from DPM 0 to 6/7 */ + smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetEclkSoftMin, 1); + } else { + cz_hwmgr->vce_dpm.hard_min_clk = hwmgr->vce_arbiter.ecclk; + smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, + PPSMC_MSG_SetEclkHardMin, + cz_get_eclk_level(hwmgr, + cz_hwmgr->vce_dpm.hard_min_clk, + PPSMC_MSG_SetEclkHardMin)); + } } return 0; } From d1b333d12cde9cabe898160b6be9769d3382d81c Mon Sep 17 00:00:00 2001 From: Jike Song Date: Thu, 12 Jan 2017 16:52:03 +0800 Subject: [PATCH 414/645] vfio iommu type1: fix the testing of capability for remote task Before the mdev enhancement type1 iommu used capable() to test the capability of current task; in the course of mdev development a new requirement, testing for another task other than current, was raised. ns_capable() was used for this purpose, however it still tests current, the only difference is, in a specified namespace. Fix it by using has_capability() instead, which tests the cap for specified task in init_user_ns, the same namespace as capable(). Cc: Gerd Hoffmann Signed-off-by: Jike Song Reviewed-by: James Morris Reviewed-by: Kirti Wankhede Signed-off-by: Alex Williamson --- drivers/vfio/vfio_iommu_type1.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 9266271a787a..77373e51b283 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -495,8 +495,7 @@ static int vfio_pin_page_external(struct vfio_dma *dma, unsigned long vaddr, unsigned long *pfn_base, bool do_accounting) { unsigned long limit; - bool lock_cap = ns_capable(task_active_pid_ns(dma->task)->user_ns, - CAP_IPC_LOCK); + bool lock_cap = has_capability(dma->task, CAP_IPC_LOCK); struct mm_struct *mm; int ret; bool rsvd; From 321012faf5975a4679771d7478b22ed42095aa9d Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Fri, 2 Dec 2016 10:24:56 +0100 Subject: [PATCH 415/645] ARM: multi_v7_defconfig: fix config typo s/CONFIG_CONFIG_BCM47XX_NVRAM/CONFIG_BCM47XX_NVRAM/ Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg Signed-off-by: Florian Fainelli --- arch/arm/configs/multi_v7_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index b01a43851294..6014a6be8459 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -893,7 +893,7 @@ CONFIG_BCM2835_MBOX=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_EFI_VARS=m CONFIG_EFI_CAPSULE_LOADER=m -CONFIG_CONFIG_BCM47XX_NVRAM=y +CONFIG_BCM47XX_NVRAM=y CONFIG_BCM47XX_SPROM=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y From 91546c56624a79f4a8fd80bede6b5a38c0f0ad78 Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Fri, 2 Dec 2016 10:42:49 +0100 Subject: [PATCH 416/645] ARM: multi_v7_defconfig: set bcm47xx watchdog Correct the bcm47xx watchdog option. The convention of bcm watchdogs is the _WDT suffix. Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers") Signed-off-by: Valentin Rothberg Signed-off-by: Florian Fainelli --- arch/arm/configs/multi_v7_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 6014a6be8459..028d2b70e3b5 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -471,7 +471,7 @@ CONFIG_MESON_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_BCM2835_WDT=y -CONFIG_BCM47XX_WATCHDOG=y +CONFIG_BCM47XX_WDT=y CONFIG_BCM7038_WDT=m CONFIG_BCM_KONA_WDT=y CONFIG_MFD_ACT8945A=y From 6771e01f7965ea13988d0a5a7972f97be4e46452 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Thu, 12 Jan 2017 10:50:10 -0500 Subject: [PATCH 417/645] ARM: dts: NSP: Fix DT ranges error The range size for axi is 0x2 bytes too small, as the QSPI needs 0x11c408 + 0x004 (which is 0x0011c40c, not 0x0011c40a). No errors have been observed with this shortcoming, but fixing it for correctness. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Jon Mason Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index b6142bda661e..15f07f9af3b3 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -160,7 +160,7 @@ axi { compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x0011c40a>; + ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; #size-cells = <1>; From d47d1d27fd6206c18806440f6ebddf51a806be4f Mon Sep 17 00:00:00 2001 From: Stefan Hajnoczi Date: Thu, 5 Jan 2017 10:05:46 +0000 Subject: [PATCH 418/645] pmem: return EIO on read_pmem() failure The read_pmem() function uses memcpy_mcsafe() on x86 where an EFAULT error code indicates a failed read. Block I/O should use EIO to indicate failure. Other pmem code paths (like bad blocks) already use EIO so let's be consistent. This fixes compatibility with consumers like btrfs that try to parse the specific error code rather than treat all errors the same. Reviewed-by: Jeff Moyer Signed-off-by: Stefan Hajnoczi Signed-off-by: Dan Williams --- drivers/nvdimm/pmem.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c index 7282d7495bf1..5b536be5a12e 100644 --- a/drivers/nvdimm/pmem.c +++ b/drivers/nvdimm/pmem.c @@ -90,7 +90,9 @@ static int read_pmem(struct page *page, unsigned int off, rc = memcpy_from_pmem(mem + off, pmem_addr, len); kunmap_atomic(mem); - return rc; + if (rc) + return -EIO; + return 0; } static int pmem_do_bvec(struct pmem_device *pmem, struct page *page, From 3139dc8ded6f27552a248d23fe9f086e3027fa12 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Niklas=20S=C3=B6derlund?= Date: Wed, 11 Jan 2017 15:39:31 +0100 Subject: [PATCH 419/645] dmaengine: rcar-dmac: unmap slave resource when channel is freed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The slave mapping should be removed together with other channel resources when the channel is freed. If it's not unmapped it will hang around forever after the channel is freed. Fixes: 9f878603dbdb7db3 ("dmaengine: rcar-dmac: add iommu support for slave transfers") Reported-by: Laurent Pinchart Signed-off-by: Niklas Söderlund Reviewed-by: Laurent Pinchart Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-dmac.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c index 2e441d0ccd79..4c357d475465 100644 --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -986,6 +986,7 @@ static void rcar_dmac_free_chan_resources(struct dma_chan *chan) { struct rcar_dmac_chan *rchan = to_rcar_dmac_chan(chan); struct rcar_dmac *dmac = to_rcar_dmac(chan->device); + struct rcar_dmac_chan_map *map = &rchan->map; struct rcar_dmac_desc_page *page, *_page; struct rcar_dmac_desc *desc; LIST_HEAD(list); @@ -1019,6 +1020,13 @@ static void rcar_dmac_free_chan_resources(struct dma_chan *chan) free_page((unsigned long)page); } + /* Remove slave mapping if present. */ + if (map->slave.xfer_size) { + dma_unmap_resource(chan->device->dev, map->addr, + map->slave.xfer_size, map->dir, 0); + map->slave.xfer_size = 0; + } + pm_runtime_put(chan->device->dev); } From d22a48bf7302ef064295749fa79cd47093c5a000 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 13 Jan 2017 11:15:56 +0800 Subject: [PATCH 420/645] drm/i915/gvt: introudce intel_vgpu_reset_resource() to reset vgpu resource state This patch introudces a new function intel_vgpu_reset_resource() to reset allocated vgpu resources by intel_vgpu_alloc_resource(). So far we only need clear the fence registers. The function _clear_vgpu_fence() will reset both virtual and physical fence registers to 0. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/aperture_gm.c | 29 ++++++++++++++++++++++++-- drivers/gpu/drm/i915/gvt/gvt.h | 1 + 2 files changed, 28 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/aperture_gm.c b/drivers/gpu/drm/i915/gvt/aperture_gm.c index 65200313515c..f7bce8603958 100644 --- a/drivers/gpu/drm/i915/gvt/aperture_gm.c +++ b/drivers/gpu/drm/i915/gvt/aperture_gm.c @@ -158,6 +158,14 @@ void intel_vgpu_write_fence(struct intel_vgpu *vgpu, POSTING_READ(fence_reg_lo); } +static void _clear_vgpu_fence(struct intel_vgpu *vgpu) +{ + int i; + + for (i = 0; i < vgpu_fence_sz(vgpu); i++) + intel_vgpu_write_fence(vgpu, i, 0); +} + static void free_vgpu_fence(struct intel_vgpu *vgpu) { struct intel_gvt *gvt = vgpu->gvt; @@ -171,9 +179,9 @@ static void free_vgpu_fence(struct intel_vgpu *vgpu) intel_runtime_pm_get(dev_priv); mutex_lock(&dev_priv->drm.struct_mutex); + _clear_vgpu_fence(vgpu); for (i = 0; i < vgpu_fence_sz(vgpu); i++) { reg = vgpu->fence.regs[i]; - intel_vgpu_write_fence(vgpu, i, 0); list_add_tail(®->link, &dev_priv->mm.fence_list); } @@ -201,13 +209,14 @@ static int alloc_vgpu_fence(struct intel_vgpu *vgpu) continue; list_del(pos); vgpu->fence.regs[i] = reg; - intel_vgpu_write_fence(vgpu, i, 0); if (++i == vgpu_fence_sz(vgpu)) break; } if (i != vgpu_fence_sz(vgpu)) goto out_free_fence; + _clear_vgpu_fence(vgpu); + mutex_unlock(&dev_priv->drm.struct_mutex); intel_runtime_pm_put(dev_priv); return 0; @@ -306,6 +315,22 @@ void intel_vgpu_free_resource(struct intel_vgpu *vgpu) free_resource(vgpu); } +/** + * intel_vgpu_reset_resource - reset resource state owned by a vGPU + * @vgpu: a vGPU + * + * This function is used to reset resource state owned by a vGPU. + * + */ +void intel_vgpu_reset_resource(struct intel_vgpu *vgpu) +{ + struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; + + intel_runtime_pm_get(dev_priv); + _clear_vgpu_fence(vgpu); + intel_runtime_pm_put(dev_priv); +} + /** * intel_alloc_vgpu_resource - allocate HW resource for a vGPU * @vgpu: vGPU diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h index 0af17016f33f..455281d07d75 100644 --- a/drivers/gpu/drm/i915/gvt/gvt.h +++ b/drivers/gpu/drm/i915/gvt/gvt.h @@ -323,6 +323,7 @@ struct intel_vgpu_creation_params { int intel_vgpu_alloc_resource(struct intel_vgpu *vgpu, struct intel_vgpu_creation_params *param); +void intel_vgpu_reset_resource(struct intel_vgpu *vgpu); void intel_vgpu_free_resource(struct intel_vgpu *vgpu); void intel_vgpu_write_fence(struct intel_vgpu *vgpu, u32 fence, u64 value); From b611581b375ce28536ab50be9cd507bb6092fb1e Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 13 Jan 2017 11:15:57 +0800 Subject: [PATCH 421/645] drm/i915/gvt: introuduce intel_vgpu_reset_gtt() to reset gtt This patch introduces a new function intel_vgpu_reset_gtt() to reset the all GTT related status, including GGTT, PPGTT, scratch page. This function can free all shadowed PPGTT, clear all GGTT entry, and clear scratch page to all zero. After this, we can ensure no gtt related information can be leakaged from one VM to anothor one when assign vgpu instance across different VMs (not simultaneously). Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 27 +++++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/gtt.h | 1 + 2 files changed, 28 insertions(+) diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index 3cf0df0bb391..47dec4acf7ff 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -2277,3 +2277,30 @@ void intel_vgpu_reset_ggtt(struct intel_vgpu *vgpu) for (offset = 0; offset < num_entries; offset++) ops->set_entry(NULL, &e, index + offset, false, 0, vgpu); } + +/** + * intel_vgpu_reset_gtt - reset the all GTT related status + * @vgpu: a vGPU + * @dmlr: true for vGPU Device Model Level Reset, false for GT Reset + * + * This function is called from vfio core to reset reset all + * GTT related status, including GGTT, PPGTT, scratch page. + * + */ +void intel_vgpu_reset_gtt(struct intel_vgpu *vgpu, bool dmlr) +{ + int i; + + ppgtt_free_all_shadow_page(vgpu); + if (!dmlr) + return; + + intel_vgpu_reset_ggtt(vgpu); + + /* clear scratch page for security */ + for (i = GTT_TYPE_PPGTT_PTE_PT; i < GTT_TYPE_MAX; i++) { + if (vgpu->gtt.scratch_pt[i].page != NULL) + memset(page_address(vgpu->gtt.scratch_pt[i].page), + 0, PAGE_SIZE); + } +} diff --git a/drivers/gpu/drm/i915/gvt/gtt.h b/drivers/gpu/drm/i915/gvt/gtt.h index b315ab3593ec..f88eb5e89bea 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.h +++ b/drivers/gpu/drm/i915/gvt/gtt.h @@ -208,6 +208,7 @@ extern void intel_vgpu_clean_gtt(struct intel_vgpu *vgpu); void intel_vgpu_reset_ggtt(struct intel_vgpu *vgpu); extern int intel_gvt_init_gtt(struct intel_gvt *gvt); +extern void intel_vgpu_reset_gtt(struct intel_vgpu *vgpu, bool dmlr); extern void intel_gvt_clean_gtt(struct intel_gvt *gvt); extern struct intel_vgpu_mm *intel_gvt_find_ppgtt_mm(struct intel_vgpu *vgpu, From 536fc234074b09adae1763d8fb5b2d947847ad1d Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 13 Jan 2017 11:15:58 +0800 Subject: [PATCH 422/645] drm/i915/gvt: move cfg space inititation function to cfg_space.c Move the configuration space inititation function setup_vgpu_cfg_space() in vgpu.c to dedicated source file cfg_space.c, and rename the function as intel_vgpu_init_cfg_space(). Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/cfg_space.c | 49 ++++++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/gvt.h | 2 ++ drivers/gpu/drm/i915/gvt/vgpu.c | 44 +------------------------ 3 files changed, 52 insertions(+), 43 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/cfg_space.c b/drivers/gpu/drm/i915/gvt/cfg_space.c index 711c31c8d8b4..82f449d59884 100644 --- a/drivers/gpu/drm/i915/gvt/cfg_space.c +++ b/drivers/gpu/drm/i915/gvt/cfg_space.c @@ -282,3 +282,52 @@ int intel_vgpu_emulate_cfg_write(struct intel_vgpu *vgpu, unsigned int offset, } return 0; } + +/** + * intel_vgpu_init_cfg_space - init vGPU configuration space when create vGPU + * + * @vgpu: a vGPU + * @primary: is the vGPU presented as primary + * + */ +void intel_vgpu_init_cfg_space(struct intel_vgpu *vgpu, + bool primary) +{ + struct intel_gvt *gvt = vgpu->gvt; + const struct intel_gvt_device_info *info = &gvt->device_info; + u16 *gmch_ctl; + int i; + + memcpy(vgpu_cfg_space(vgpu), gvt->firmware.cfg_space, + info->cfg_space_size); + + if (!primary) { + vgpu_cfg_space(vgpu)[PCI_CLASS_DEVICE] = + INTEL_GVT_PCI_CLASS_VGA_OTHER; + vgpu_cfg_space(vgpu)[PCI_CLASS_PROG] = + INTEL_GVT_PCI_CLASS_VGA_OTHER; + } + + /* Show guest that there isn't any stolen memory.*/ + gmch_ctl = (u16 *)(vgpu_cfg_space(vgpu) + INTEL_GVT_PCI_GMCH_CONTROL); + *gmch_ctl &= ~(BDW_GMCH_GMS_MASK << BDW_GMCH_GMS_SHIFT); + + intel_vgpu_write_pci_bar(vgpu, PCI_BASE_ADDRESS_2, + gvt_aperture_pa_base(gvt), true); + + vgpu_cfg_space(vgpu)[PCI_COMMAND] &= ~(PCI_COMMAND_IO + | PCI_COMMAND_MEMORY + | PCI_COMMAND_MASTER); + /* + * Clear the bar upper 32bit and let guest to assign the new value + */ + memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_1, 0, 4); + memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_3, 0, 4); + memset(vgpu_cfg_space(vgpu) + INTEL_GVT_PCI_OPREGION, 0, 4); + + for (i = 0; i < INTEL_GVT_MAX_BAR_NUM; i++) { + vgpu->cfg_space.bar[i].size = pci_resource_len( + gvt->dev_priv->drm.pdev, i * 2); + vgpu->cfg_space.bar[i].tracked = false; + } +} diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h index 455281d07d75..ab505552d313 100644 --- a/drivers/gpu/drm/i915/gvt/gvt.h +++ b/drivers/gpu/drm/i915/gvt/gvt.h @@ -412,6 +412,8 @@ int intel_gvt_ggtt_index_g2h(struct intel_vgpu *vgpu, unsigned long g_index, int intel_gvt_ggtt_h2g_index(struct intel_vgpu *vgpu, unsigned long h_index, unsigned long *g_index); +void intel_vgpu_init_cfg_space(struct intel_vgpu *vgpu, + bool primary); int intel_vgpu_emulate_cfg_read(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes); diff --git a/drivers/gpu/drm/i915/gvt/vgpu.c b/drivers/gpu/drm/i915/gvt/vgpu.c index f0e86123e45b..35c274177da8 100644 --- a/drivers/gpu/drm/i915/gvt/vgpu.c +++ b/drivers/gpu/drm/i915/gvt/vgpu.c @@ -66,48 +66,6 @@ int setup_vgpu_mmio(struct intel_vgpu *vgpu) return 0; } -static void setup_vgpu_cfg_space(struct intel_vgpu *vgpu, - struct intel_vgpu_creation_params *param) -{ - struct intel_gvt *gvt = vgpu->gvt; - const struct intel_gvt_device_info *info = &gvt->device_info; - u16 *gmch_ctl; - int i; - - memcpy(vgpu_cfg_space(vgpu), gvt->firmware.cfg_space, - info->cfg_space_size); - - if (!param->primary) { - vgpu_cfg_space(vgpu)[PCI_CLASS_DEVICE] = - INTEL_GVT_PCI_CLASS_VGA_OTHER; - vgpu_cfg_space(vgpu)[PCI_CLASS_PROG] = - INTEL_GVT_PCI_CLASS_VGA_OTHER; - } - - /* Show guest that there isn't any stolen memory.*/ - gmch_ctl = (u16 *)(vgpu_cfg_space(vgpu) + INTEL_GVT_PCI_GMCH_CONTROL); - *gmch_ctl &= ~(BDW_GMCH_GMS_MASK << BDW_GMCH_GMS_SHIFT); - - intel_vgpu_write_pci_bar(vgpu, PCI_BASE_ADDRESS_2, - gvt_aperture_pa_base(gvt), true); - - vgpu_cfg_space(vgpu)[PCI_COMMAND] &= ~(PCI_COMMAND_IO - | PCI_COMMAND_MEMORY - | PCI_COMMAND_MASTER); - /* - * Clear the bar upper 32bit and let guest to assign the new value - */ - memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_1, 0, 4); - memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_3, 0, 4); - memset(vgpu_cfg_space(vgpu) + INTEL_GVT_PCI_OPREGION, 0, 4); - - for (i = 0; i < INTEL_GVT_MAX_BAR_NUM; i++) { - vgpu->cfg_space.bar[i].size = pci_resource_len( - gvt->dev_priv->drm.pdev, i * 2); - vgpu->cfg_space.bar[i].tracked = false; - } -} - void populate_pvinfo_page(struct intel_vgpu *vgpu) { /* setup the ballooning information */ @@ -300,7 +258,7 @@ static struct intel_vgpu *__intel_gvt_create_vgpu(struct intel_gvt *gvt, vgpu->gvt = gvt; bitmap_zero(vgpu->tlb_handle_pending, I915_NUM_ENGINES); - setup_vgpu_cfg_space(vgpu, param); + intel_vgpu_init_cfg_space(vgpu, param->primary); ret = setup_vgpu_mmio(vgpu); if (ret) From c64ff6c774413fdbffd7f0f3ef5b04127d461cf4 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 13 Jan 2017 11:15:59 +0800 Subject: [PATCH 423/645] drm/i915/gvt: introduce intel_vgpu_reset_cfg_space to reset configuration space This patch introduces a new function intel_vgpu_reset_cfg_space() to reset vGPU configuration space. This function will unmap gttmmio and aperture if they are mapped before. Then entire cfg space will be restored to default values. Currently we only do such reset when vGPU is not owned by any VM so we simply restore entire cfg space to default value, not following the PCIe FLR spec that some fields should remain unchanged. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/cfg_space.c | 25 +++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/gvt.h | 2 ++ 2 files changed, 27 insertions(+) diff --git a/drivers/gpu/drm/i915/gvt/cfg_space.c b/drivers/gpu/drm/i915/gvt/cfg_space.c index 82f449d59884..4a6a2ed65732 100644 --- a/drivers/gpu/drm/i915/gvt/cfg_space.c +++ b/drivers/gpu/drm/i915/gvt/cfg_space.c @@ -331,3 +331,28 @@ void intel_vgpu_init_cfg_space(struct intel_vgpu *vgpu, vgpu->cfg_space.bar[i].tracked = false; } } + +/** + * intel_vgpu_reset_cfg_space - reset vGPU configuration space + * + * @vgpu: a vGPU + * + */ +void intel_vgpu_reset_cfg_space(struct intel_vgpu *vgpu) +{ + u8 cmd = vgpu_cfg_space(vgpu)[PCI_COMMAND]; + bool primary = vgpu_cfg_space(vgpu)[PCI_CLASS_DEVICE] != + INTEL_GVT_PCI_CLASS_VGA_OTHER; + + if (cmd & PCI_COMMAND_MEMORY) { + trap_gttmmio(vgpu, false); + map_aperture(vgpu, false); + } + + /** + * Currently we only do such reset when vGPU is not + * owned by any VM, so we simply restore entire cfg + * space to default value. + */ + intel_vgpu_init_cfg_space(vgpu, primary); +} diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h index ab505552d313..9c97d7d36449 100644 --- a/drivers/gpu/drm/i915/gvt/gvt.h +++ b/drivers/gpu/drm/i915/gvt/gvt.h @@ -414,6 +414,8 @@ int intel_gvt_ggtt_h2g_index(struct intel_vgpu *vgpu, unsigned long h_index, void intel_vgpu_init_cfg_space(struct intel_vgpu *vgpu, bool primary); +void intel_vgpu_reset_cfg_space(struct intel_vgpu *vgpu); + int intel_vgpu_emulate_cfg_read(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes); From cdcc43479c9b929940a1955d2e7bae696d2b9496 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 13 Jan 2017 11:16:00 +0800 Subject: [PATCH 424/645] drm/i915/gvt: move mmio init/clean function to mmio.c Move the mmio space inititation function setup_vgpu_mmio() and cleanup function clean_vgpu_mmio() in vgpu.c to dedicated source file mmio.c, and rename them as intel_vgpu_init_mmio() and intel_vgpu_clean_mmio() respectively. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gvt.h | 1 - drivers/gpu/drm/i915/gvt/handlers.c | 2 +- drivers/gpu/drm/i915/gvt/mmio.c | 42 +++++++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/mmio.h | 3 +++ drivers/gpu/drm/i915/gvt/vgpu.c | 37 +++---------------------- 5 files changed, 49 insertions(+), 36 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h index 9c97d7d36449..9832e7f2a662 100644 --- a/drivers/gpu/drm/i915/gvt/gvt.h +++ b/drivers/gpu/drm/i915/gvt/gvt.h @@ -429,7 +429,6 @@ void intel_vgpu_clean_opregion(struct intel_vgpu *vgpu); int intel_vgpu_init_opregion(struct intel_vgpu *vgpu, u32 gpa); int intel_vgpu_emulate_opregion_request(struct intel_vgpu *vgpu, u32 swsci); -int setup_vgpu_mmio(struct intel_vgpu *vgpu); void populate_pvinfo_page(struct intel_vgpu *vgpu); struct intel_gvt_ops { diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 8cbaf1c83720..fd96898db71d 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -257,7 +257,7 @@ static int handle_device_reset(struct intel_vgpu *vgpu, unsigned int offset, mutex_unlock(&vgpu->gvt->lock); intel_vgpu_clean_gtt(vgpu); mutex_lock(&vgpu->gvt->lock); - setup_vgpu_mmio(vgpu); + intel_vgpu_init_mmio(vgpu); populate_pvinfo_page(vgpu); intel_vgpu_init_gtt(vgpu); } diff --git a/drivers/gpu/drm/i915/gvt/mmio.c b/drivers/gpu/drm/i915/gvt/mmio.c index e60701397ac2..f7da735b7919 100644 --- a/drivers/gpu/drm/i915/gvt/mmio.c +++ b/drivers/gpu/drm/i915/gvt/mmio.c @@ -303,3 +303,45 @@ err: mutex_unlock(&gvt->lock); return ret; } + +/** + * intel_vgpu_init_mmio - init MMIO space + * @vgpu: a vGPU + * + * Returns: + * Zero on success, negative error code if failed + */ +int intel_vgpu_init_mmio(struct intel_vgpu *vgpu) +{ + const struct intel_gvt_device_info *info = &vgpu->gvt->device_info; + + if (vgpu->mmio.vreg) + memset(vgpu->mmio.vreg, 0, info->mmio_size * 2); + else { + vgpu->mmio.vreg = vzalloc(info->mmio_size * 2); + if (!vgpu->mmio.vreg) + return -ENOMEM; + } + vgpu->mmio.sreg = vgpu->mmio.vreg + info->mmio_size; + + memcpy(vgpu->mmio.vreg, vgpu->gvt->firmware.mmio, info->mmio_size); + memcpy(vgpu->mmio.sreg, vgpu->gvt->firmware.mmio, info->mmio_size); + + vgpu_vreg(vgpu, GEN6_GT_THREAD_STATUS_REG) = 0; + + /* set the bit 0:2(Core C-State ) to C0 */ + vgpu_vreg(vgpu, GEN6_GT_CORE_STATUS) = 0; + + return 0; +} + +/** + * intel_vgpu_clean_mmio - clean MMIO space + * @vgpu: a vGPU + * + */ +void intel_vgpu_clean_mmio(struct intel_vgpu *vgpu) +{ + vfree(vgpu->mmio.vreg); + vgpu->mmio.vreg = vgpu->mmio.sreg = NULL; +} diff --git a/drivers/gpu/drm/i915/gvt/mmio.h b/drivers/gpu/drm/i915/gvt/mmio.h index 87d5b5e366a3..1b74ac9650d5 100644 --- a/drivers/gpu/drm/i915/gvt/mmio.h +++ b/drivers/gpu/drm/i915/gvt/mmio.h @@ -86,6 +86,9 @@ struct intel_gvt_mmio_info *intel_gvt_find_mmio_info(struct intel_gvt *gvt, *offset; \ }) +int intel_vgpu_init_mmio(struct intel_vgpu *vgpu); +void intel_vgpu_clean_mmio(struct intel_vgpu *vgpu); + int intel_vgpu_gpa_to_mmio_offset(struct intel_vgpu *vgpu, u64 gpa); int intel_vgpu_emulate_mmio_read(struct intel_vgpu *vgpu, u64 pa, diff --git a/drivers/gpu/drm/i915/gvt/vgpu.c b/drivers/gpu/drm/i915/gvt/vgpu.c index 35c274177da8..958c3ed1c6c6 100644 --- a/drivers/gpu/drm/i915/gvt/vgpu.c +++ b/drivers/gpu/drm/i915/gvt/vgpu.c @@ -35,37 +35,6 @@ #include "gvt.h" #include "i915_pvinfo.h" -static void clean_vgpu_mmio(struct intel_vgpu *vgpu) -{ - vfree(vgpu->mmio.vreg); - vgpu->mmio.vreg = vgpu->mmio.sreg = NULL; -} - -int setup_vgpu_mmio(struct intel_vgpu *vgpu) -{ - struct intel_gvt *gvt = vgpu->gvt; - const struct intel_gvt_device_info *info = &gvt->device_info; - - if (vgpu->mmio.vreg) - memset(vgpu->mmio.vreg, 0, info->mmio_size * 2); - else { - vgpu->mmio.vreg = vzalloc(info->mmio_size * 2); - if (!vgpu->mmio.vreg) - return -ENOMEM; - } - - vgpu->mmio.sreg = vgpu->mmio.vreg + info->mmio_size; - - memcpy(vgpu->mmio.vreg, gvt->firmware.mmio, info->mmio_size); - memcpy(vgpu->mmio.sreg, gvt->firmware.mmio, info->mmio_size); - - vgpu_vreg(vgpu, GEN6_GT_THREAD_STATUS_REG) = 0; - - /* set the bit 0:2(Core C-State ) to C0 */ - vgpu_vreg(vgpu, GEN6_GT_CORE_STATUS) = 0; - return 0; -} - void populate_pvinfo_page(struct intel_vgpu *vgpu) { /* setup the ballooning information */ @@ -226,7 +195,7 @@ void intel_gvt_destroy_vgpu(struct intel_vgpu *vgpu) intel_vgpu_clean_gtt(vgpu); intel_gvt_hypervisor_detach_vgpu(vgpu); intel_vgpu_free_resource(vgpu); - clean_vgpu_mmio(vgpu); + intel_vgpu_clean_mmio(vgpu); vfree(vgpu); intel_gvt_update_vgpu_types(gvt); @@ -260,7 +229,7 @@ static struct intel_vgpu *__intel_gvt_create_vgpu(struct intel_gvt *gvt, intel_vgpu_init_cfg_space(vgpu, param->primary); - ret = setup_vgpu_mmio(vgpu); + ret = intel_vgpu_init_mmio(vgpu); if (ret) goto out_clean_idr; @@ -312,7 +281,7 @@ out_detach_hypervisor_vgpu: out_clean_vgpu_resource: intel_vgpu_free_resource(vgpu); out_clean_vgpu_mmio: - clean_vgpu_mmio(vgpu); + intel_vgpu_clean_mmio(vgpu); out_clean_idr: idr_remove(&gvt->vgpu_idr, vgpu->id); out_free_vgpu: From 97d58f7dd0ff12e5fddeffb40aed845daa628149 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 13 Jan 2017 11:16:01 +0800 Subject: [PATCH 425/645] drm/i915/gvt: introduce intel_vgpu_reset_mmio() to reset mmio space This patch introduces a new function intel_vgpu_reset_mmio() to reset vGPU MMIO space (virtual registers of the vGPU). The default values are loaded as firmware during gvt inititiation. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/mmio.c | 39 +++++++++++++++++++++------------ drivers/gpu/drm/i915/gvt/mmio.h | 1 + 2 files changed, 26 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/mmio.c b/drivers/gpu/drm/i915/gvt/mmio.c index f7da735b7919..4df078bc5d04 100644 --- a/drivers/gpu/drm/i915/gvt/mmio.c +++ b/drivers/gpu/drm/i915/gvt/mmio.c @@ -304,6 +304,26 @@ err: return ret; } + +/** + * intel_vgpu_reset_mmio - reset virtual MMIO space + * @vgpu: a vGPU + * + */ +void intel_vgpu_reset_mmio(struct intel_vgpu *vgpu) +{ + struct intel_gvt *gvt = vgpu->gvt; + const struct intel_gvt_device_info *info = &gvt->device_info; + + memcpy(vgpu->mmio.vreg, gvt->firmware.mmio, info->mmio_size); + memcpy(vgpu->mmio.sreg, gvt->firmware.mmio, info->mmio_size); + + vgpu_vreg(vgpu, GEN6_GT_THREAD_STATUS_REG) = 0; + + /* set the bit 0:2(Core C-State ) to C0 */ + vgpu_vreg(vgpu, GEN6_GT_CORE_STATUS) = 0; +} + /** * intel_vgpu_init_mmio - init MMIO space * @vgpu: a vGPU @@ -315,22 +335,13 @@ int intel_vgpu_init_mmio(struct intel_vgpu *vgpu) { const struct intel_gvt_device_info *info = &vgpu->gvt->device_info; - if (vgpu->mmio.vreg) - memset(vgpu->mmio.vreg, 0, info->mmio_size * 2); - else { - vgpu->mmio.vreg = vzalloc(info->mmio_size * 2); - if (!vgpu->mmio.vreg) - return -ENOMEM; - } + vgpu->mmio.vreg = vzalloc(info->mmio_size * 2); + if (!vgpu->mmio.vreg) + return -ENOMEM; + vgpu->mmio.sreg = vgpu->mmio.vreg + info->mmio_size; - memcpy(vgpu->mmio.vreg, vgpu->gvt->firmware.mmio, info->mmio_size); - memcpy(vgpu->mmio.sreg, vgpu->gvt->firmware.mmio, info->mmio_size); - - vgpu_vreg(vgpu, GEN6_GT_THREAD_STATUS_REG) = 0; - - /* set the bit 0:2(Core C-State ) to C0 */ - vgpu_vreg(vgpu, GEN6_GT_CORE_STATUS) = 0; + intel_vgpu_reset_mmio(vgpu); return 0; } diff --git a/drivers/gpu/drm/i915/gvt/mmio.h b/drivers/gpu/drm/i915/gvt/mmio.h index 1b74ac9650d5..3bc620f56f35 100644 --- a/drivers/gpu/drm/i915/gvt/mmio.h +++ b/drivers/gpu/drm/i915/gvt/mmio.h @@ -87,6 +87,7 @@ struct intel_gvt_mmio_info *intel_gvt_find_mmio_info(struct intel_gvt *gvt, }) int intel_vgpu_init_mmio(struct intel_vgpu *vgpu); +void intel_vgpu_reset_mmio(struct intel_vgpu *vgpu); void intel_vgpu_clean_mmio(struct intel_vgpu *vgpu); int intel_vgpu_gpa_to_mmio_offset(struct intel_vgpu *vgpu, u64 gpa); From cfe65f4037cedb911a840ebcf6dafc5b69e535b4 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 13 Jan 2017 11:16:02 +0800 Subject: [PATCH 426/645] drm/i915/gvt: fix vGPU instance reuse issues by vGPU reset function Our function tests found several issues related to reusing vGPU instance. They are qemu reboot failure, guest tdr after reboot, host hang when reboot guest. All these issues are caused by dirty status inherited from last VM. This patch fix all these issues by resetting a virtual GPU before VM use it. The reset logical is put into a low level function _intel_gvt_reset_vgpu(), which supports Device Model Level Reset, Full GT Reset and Per-Engine Reset. vGPU Device Model Level Reset (DMLR) simulates the PCI reset to reset the whole vGPU to default state as when it is created, including GTT, execlist, scratch pages, cfg space, mmio space, pvinfo page, scheduler and fence registers. The ultimate goal of vGPU DMLR is that reuse a vGPU instance by different virtual machines. When we reassign a vGPU to a virtual machine we must issue such reset first. Full GT Reset and Per-Engine GT Reset are soft reset flow for GPU engines (Render, Blitter, Video, Video Enhancement). It is defined by GPU Spec. Unlike the FLR, GT reset only reset particular resource of a vGPU per the reset request. Guest driver can issue a GT reset by programming the virtual GDRST register to reset specific virtual GPU engine or all engines. Since vGPU DMLR and GT reset can share some code so we implement both these two into one single function intel_gvt_reset_vgpu_locked(). The parameter dmlr is to identify if we will do FLR or GT reset. The parameter engine_mask is to specific the engines that need to be resetted. If value ALL_ENGINES is given for engine_mask, it means the caller requests a full gt reset that we will reset all virtual GPU engines. Signed-off-by: Changbin Du Reviewed-by: Jike Song Reviewed-by: Kevin Tian Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gvt.h | 2 + drivers/gpu/drm/i915/gvt/vgpu.c | 73 ++++++++++++++++++++++++++++++++- 2 files changed, 74 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h index 9832e7f2a662..e227caf5859e 100644 --- a/drivers/gpu/drm/i915/gvt/gvt.h +++ b/drivers/gpu/drm/i915/gvt/gvt.h @@ -376,6 +376,8 @@ void intel_gvt_clean_vgpu_types(struct intel_gvt *gvt); struct intel_vgpu *intel_gvt_create_vgpu(struct intel_gvt *gvt, struct intel_vgpu_type *type); void intel_gvt_destroy_vgpu(struct intel_vgpu *vgpu); +void intel_gvt_reset_vgpu_locked(struct intel_vgpu *vgpu, bool dmlr, + unsigned int engine_mask); void intel_gvt_reset_vgpu(struct intel_vgpu *vgpu); diff --git a/drivers/gpu/drm/i915/gvt/vgpu.c b/drivers/gpu/drm/i915/gvt/vgpu.c index 958c3ed1c6c6..7295bc8e12fb 100644 --- a/drivers/gpu/drm/i915/gvt/vgpu.c +++ b/drivers/gpu/drm/i915/gvt/vgpu.c @@ -327,7 +327,75 @@ struct intel_vgpu *intel_gvt_create_vgpu(struct intel_gvt *gvt, } /** - * intel_gvt_reset_vgpu - reset a virtual GPU + * intel_gvt_reset_vgpu_locked - reset a virtual GPU by DMLR or GT reset + * @vgpu: virtual GPU + * @dmlr: vGPU Device Model Level Reset or GT Reset + * @engine_mask: engines to reset for GT reset + * + * This function is called when user wants to reset a virtual GPU through + * device model reset or GT reset. The caller should hold the gvt lock. + * + * vGPU Device Model Level Reset (DMLR) simulates the PCI level reset to reset + * the whole vGPU to default state as when it is created. This vGPU function + * is required both for functionary and security concerns.The ultimate goal + * of vGPU FLR is that reuse a vGPU instance by virtual machines. When we + * assign a vGPU to a virtual machine we must isse such reset first. + * + * Full GT Reset and Per-Engine GT Reset are soft reset flow for GPU engines + * (Render, Blitter, Video, Video Enhancement). It is defined by GPU Spec. + * Unlike the FLR, GT reset only reset particular resource of a vGPU per + * the reset request. Guest driver can issue a GT reset by programming the + * virtual GDRST register to reset specific virtual GPU engine or all + * engines. + * + * The parameter dev_level is to identify if we will do DMLR or GT reset. + * The parameter engine_mask is to specific the engines that need to be + * resetted. If value ALL_ENGINES is given for engine_mask, it means + * the caller requests a full GT reset that we will reset all virtual + * GPU engines. For FLR, engine_mask is ignored. + */ +void intel_gvt_reset_vgpu_locked(struct intel_vgpu *vgpu, bool dmlr, + unsigned int engine_mask) +{ + struct intel_gvt *gvt = vgpu->gvt; + struct intel_gvt_workload_scheduler *scheduler = &gvt->scheduler; + + gvt_dbg_core("------------------------------------------\n"); + gvt_dbg_core("resseting vgpu%d, dmlr %d, engine_mask %08x\n", + vgpu->id, dmlr, engine_mask); + vgpu->resetting = true; + + intel_vgpu_stop_schedule(vgpu); + /* + * The current_vgpu will set to NULL after stopping the + * scheduler when the reset is triggered by current vgpu. + */ + if (scheduler->current_vgpu == NULL) { + mutex_unlock(&gvt->lock); + intel_gvt_wait_vgpu_idle(vgpu); + mutex_lock(&gvt->lock); + } + + intel_vgpu_reset_execlist(vgpu, dmlr ? ALL_ENGINES : engine_mask); + + /* full GPU reset or device model level reset */ + if (engine_mask == ALL_ENGINES || dmlr) { + intel_vgpu_reset_gtt(vgpu, dmlr); + intel_vgpu_reset_resource(vgpu); + intel_vgpu_reset_mmio(vgpu); + populate_pvinfo_page(vgpu); + + if (dmlr) + intel_vgpu_reset_cfg_space(vgpu); + } + + vgpu->resetting = false; + gvt_dbg_core("reset vgpu%d done\n", vgpu->id); + gvt_dbg_core("------------------------------------------\n"); +} + +/** + * intel_gvt_reset_vgpu - reset a virtual GPU (Function Level) * @vgpu: virtual GPU * * This function is called when user wants to reset a virtual GPU. @@ -335,4 +403,7 @@ struct intel_vgpu *intel_gvt_create_vgpu(struct intel_gvt *gvt, */ void intel_gvt_reset_vgpu(struct intel_vgpu *vgpu) { + mutex_lock(&vgpu->gvt->lock); + intel_gvt_reset_vgpu_locked(vgpu, true, 0); + mutex_unlock(&vgpu->gvt->lock); } From c34eaa8d0f9d9ae26a4a6af7bc3aca57310cf483 Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Fri, 13 Jan 2017 11:16:03 +0800 Subject: [PATCH 427/645] drm/i915/gvt: rewrite gt reset handler using new function intel_gvt_reset_vgpu_locked GT reset and FLR share some operations and they are both implemented in our new function intel_gvt_reset_vgpu_locked(). This patch rewrite the gt reset handler using this new function. Besides, this new implementation fixed the old issue in GT reset. The old implementation reset GGTT entries which is illegal. We only clear GGTT entries at PCI level reset. Signed-off-by: Changbin Du Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 90 ++++++++++------------------- 1 file changed, 29 insertions(+), 61 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index fd96898db71d..ab2ea157da4c 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -231,77 +231,45 @@ static int mul_force_wake_write(struct intel_vgpu *vgpu, return 0; } -static int handle_device_reset(struct intel_vgpu *vgpu, unsigned int offset, - void *p_data, unsigned int bytes, unsigned long bitmap) -{ - struct intel_gvt_workload_scheduler *scheduler = - &vgpu->gvt->scheduler; - - vgpu->resetting = true; - - intel_vgpu_stop_schedule(vgpu); - /* - * The current_vgpu will set to NULL after stopping the - * scheduler when the reset is triggered by current vgpu. - */ - if (scheduler->current_vgpu == NULL) { - mutex_unlock(&vgpu->gvt->lock); - intel_gvt_wait_vgpu_idle(vgpu); - mutex_lock(&vgpu->gvt->lock); - } - - intel_vgpu_reset_execlist(vgpu, bitmap); - - /* full GPU reset */ - if (bitmap == 0xff) { - mutex_unlock(&vgpu->gvt->lock); - intel_vgpu_clean_gtt(vgpu); - mutex_lock(&vgpu->gvt->lock); - intel_vgpu_init_mmio(vgpu); - populate_pvinfo_page(vgpu); - intel_vgpu_init_gtt(vgpu); - } - - vgpu->resetting = false; - - return 0; -} - static int gdrst_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, - void *p_data, unsigned int bytes) + void *p_data, unsigned int bytes) { + unsigned int engine_mask = 0; u32 data; - u64 bitmap = 0; write_vreg(vgpu, offset, p_data, bytes); data = vgpu_vreg(vgpu, offset); if (data & GEN6_GRDOM_FULL) { gvt_dbg_mmio("vgpu%d: request full GPU reset\n", vgpu->id); - bitmap = 0xff; + engine_mask = ALL_ENGINES; + } else { + if (data & GEN6_GRDOM_RENDER) { + gvt_dbg_mmio("vgpu%d: request RCS reset\n", vgpu->id); + engine_mask |= (1 << RCS); + } + if (data & GEN6_GRDOM_MEDIA) { + gvt_dbg_mmio("vgpu%d: request VCS reset\n", vgpu->id); + engine_mask |= (1 << VCS); + } + if (data & GEN6_GRDOM_BLT) { + gvt_dbg_mmio("vgpu%d: request BCS Reset\n", vgpu->id); + engine_mask |= (1 << BCS); + } + if (data & GEN6_GRDOM_VECS) { + gvt_dbg_mmio("vgpu%d: request VECS Reset\n", vgpu->id); + engine_mask |= (1 << VECS); + } + if (data & GEN8_GRDOM_MEDIA2) { + gvt_dbg_mmio("vgpu%d: request VCS2 Reset\n", vgpu->id); + if (HAS_BSD2(vgpu->gvt->dev_priv)) + engine_mask |= (1 << VCS2); + } } - if (data & GEN6_GRDOM_RENDER) { - gvt_dbg_mmio("vgpu%d: request RCS reset\n", vgpu->id); - bitmap |= (1 << RCS); - } - if (data & GEN6_GRDOM_MEDIA) { - gvt_dbg_mmio("vgpu%d: request VCS reset\n", vgpu->id); - bitmap |= (1 << VCS); - } - if (data & GEN6_GRDOM_BLT) { - gvt_dbg_mmio("vgpu%d: request BCS Reset\n", vgpu->id); - bitmap |= (1 << BCS); - } - if (data & GEN6_GRDOM_VECS) { - gvt_dbg_mmio("vgpu%d: request VECS Reset\n", vgpu->id); - bitmap |= (1 << VECS); - } - if (data & GEN8_GRDOM_MEDIA2) { - gvt_dbg_mmio("vgpu%d: request VCS2 Reset\n", vgpu->id); - if (HAS_BSD2(vgpu->gvt->dev_priv)) - bitmap |= (1 << VCS2); - } - return handle_device_reset(vgpu, offset, p_data, bytes, bitmap); + + intel_gvt_reset_vgpu_locked(vgpu, false, engine_mask); + + return 0; } static int gmbus_mmio_read(struct intel_vgpu *vgpu, unsigned int offset, From f65a7c9cb3770ed4d3e7c57c66d7032689081b5e Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Mon, 9 Jan 2017 15:33:02 +0100 Subject: [PATCH 428/645] drm/exynos/decon5433: update shadow registers iff there are active windows Improper usage of DECON_UPDATE register leads to subtle errors. If it set in decon_commit when there are no active windows it results in slow registry updates - all subsequent shadow registry updates takes more than full vblank. On the other side if it is not set when there are active windows it results in garbage on the screen after suspend/resume of FB console. The patch hopefully fixes it. Signed-off-by: Andrzej Hajda Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 6ca1f3117fe8..ef7fcb5f044b 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -188,8 +188,6 @@ static void decon_commit(struct exynos_drm_crtc *crtc) /* enable output and display signal */ decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0); - - decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); } static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win, @@ -340,8 +338,9 @@ static void decon_atomic_flush(struct exynos_drm_crtc *crtc) for (i = ctx->first_win; i < WINDOWS_NR; i++) decon_shadow_protect_win(ctx, i, false); - /* standalone update */ - decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); + /* update iff there are active windows */ + if (crtc->base.state->plane_mask) + decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); if (ctx->out_type & IFTYPE_I80) set_bit(BIT_WIN_UPDATED, &ctx->flags); From 821b40b79db7dedbfe15ab330dfd181e661a533f Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Fri, 13 Jan 2017 10:20:58 +0100 Subject: [PATCH 429/645] drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabled STANDALONE_UPDATE_F should be set if something changed in plane configurations, including plane disable. The patch fixes page-faults bugs, caused by decon still using framebuffers of disabled planes. v2: fixed clear-bit code (Thx Marek) v3: use test_and_clear_bit (Thx Joonyoung) Signed-off-by: Andrzej Hajda Tested-by: Joonyoung Shim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index ef7fcb5f044b..09e8cc36948e 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -46,7 +46,8 @@ enum decon_flag_bits { BIT_CLKS_ENABLED, BIT_IRQS_ENABLED, BIT_WIN_UPDATED, - BIT_SUSPENDED + BIT_SUSPENDED, + BIT_REQUEST_UPDATE }; struct decon_context { @@ -313,6 +314,7 @@ static void decon_update_plane(struct exynos_drm_crtc *crtc, /* window enable */ decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, ~0); + set_bit(BIT_REQUEST_UPDATE, &ctx->flags); } static void decon_disable_plane(struct exynos_drm_crtc *crtc, @@ -325,6 +327,7 @@ static void decon_disable_plane(struct exynos_drm_crtc *crtc, return; decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, 0); + set_bit(BIT_REQUEST_UPDATE, &ctx->flags); } static void decon_atomic_flush(struct exynos_drm_crtc *crtc) @@ -338,8 +341,7 @@ static void decon_atomic_flush(struct exynos_drm_crtc *crtc) for (i = ctx->first_win; i < WINDOWS_NR; i++) decon_shadow_protect_win(ctx, i, false); - /* update iff there are active windows */ - if (crtc->base.state->plane_mask) + if (test_and_clear_bit(BIT_REQUEST_UPDATE, &ctx->flags)) decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); if (ctx->out_type & IFTYPE_I80) From 43071d8fb3b7f589d72663c496a6880fb097533c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 13 Jan 2017 11:28:25 +0100 Subject: [PATCH 430/645] mac80211: initialize SMPS field in HT capabilities ibss and mesh modes copy the ht capabilites from the band without overriding the SMPS state. Unfortunately the default value 0 for the SMPS field means static SMPS instead of disabled. This results in HT ibss and mesh setups using only single-stream rates, even though SMPS is not supposed to be active. Initialize SMPS to disabled for all bands on ieee80211_hw_register to ensure that the value is sane where it is not overriden with the real SMPS state. Reported-by: Elektra Wagenrad Signed-off-by: Felix Fietkau [move VHT TODO comment to a better place] Signed-off-by: Johannes Berg --- net/mac80211/main.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 1822c77f2b1c..56fb47953b72 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -913,12 +913,17 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) supp_ht = supp_ht || sband->ht_cap.ht_supported; supp_vht = supp_vht || sband->vht_cap.vht_supported; - if (sband->ht_cap.ht_supported) - local->rx_chains = - max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs), - local->rx_chains); + if (!sband->ht_cap.ht_supported) + continue; /* TODO: consider VHT for RX chains, hopefully it's the same */ + local->rx_chains = + max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs), + local->rx_chains); + + /* no need to mask, SM_PS_DISABLED has all bits set */ + sband->ht_cap.cap |= WLAN_HT_CAP_SM_PS_DISABLED << + IEEE80211_HT_CAP_SM_PS_SHIFT; } /* if low-level driver supports AP, we also support VLAN */ From 6d104af38b570d37aa32a5803b04c354f8ed513d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 12 Jan 2017 18:17:42 +0100 Subject: [PATCH 431/645] HID: corsair: fix DMA buffers on stack Not all platforms support DMA to the stack, and specifically since v4.9 this is no longer supported on x86 with VMAP_STACK either. Note that the macro-mode buffer was larger than necessary. Fixes: 6f78193ee9ea ("HID: corsair: Add Corsair Vengeance K90 driver") Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Jiri Kosina --- drivers/hid/hid-corsair.c | 54 ++++++++++++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 12 deletions(-) diff --git a/drivers/hid/hid-corsair.c b/drivers/hid/hid-corsair.c index 717704e9ae07..5971907a23b1 100644 --- a/drivers/hid/hid-corsair.c +++ b/drivers/hid/hid-corsair.c @@ -148,7 +148,11 @@ static enum led_brightness k90_backlight_get(struct led_classdev *led_cdev) struct usb_interface *usbif = to_usb_interface(dev->parent); struct usb_device *usbdev = interface_to_usbdev(usbif); int brightness; - char data[8]; + char *data; + + data = kmalloc(8, GFP_KERNEL); + if (!data) + return -ENOMEM; ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), K90_REQUEST_STATUS, @@ -158,16 +162,22 @@ static enum led_brightness k90_backlight_get(struct led_classdev *led_cdev) if (ret < 0) { dev_warn(dev, "Failed to get K90 initial state (error %d).\n", ret); - return -EIO; + ret = -EIO; + goto out; } brightness = data[4]; if (brightness < 0 || brightness > 3) { dev_warn(dev, "Read invalid backlight brightness: %02hhx.\n", data[4]); - return -EIO; + ret = -EIO; + goto out; } - return brightness; + ret = brightness; +out: + kfree(data); + + return ret; } static enum led_brightness k90_record_led_get(struct led_classdev *led_cdev) @@ -253,7 +263,11 @@ static ssize_t k90_show_macro_mode(struct device *dev, struct usb_interface *usbif = to_usb_interface(dev->parent); struct usb_device *usbdev = interface_to_usbdev(usbif); const char *macro_mode; - char data[8]; + char *data; + + data = kmalloc(2, GFP_KERNEL); + if (!data) + return -ENOMEM; ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), K90_REQUEST_GET_MODE, @@ -263,7 +277,8 @@ static ssize_t k90_show_macro_mode(struct device *dev, if (ret < 0) { dev_warn(dev, "Failed to get K90 initial mode (error %d).\n", ret); - return -EIO; + ret = -EIO; + goto out; } switch (data[0]) { @@ -277,10 +292,15 @@ static ssize_t k90_show_macro_mode(struct device *dev, default: dev_warn(dev, "K90 in unknown mode: %02hhx.\n", data[0]); - return -EIO; + ret = -EIO; + goto out; } - return snprintf(buf, PAGE_SIZE, "%s\n", macro_mode); + ret = snprintf(buf, PAGE_SIZE, "%s\n", macro_mode); +out: + kfree(data); + + return ret; } static ssize_t k90_store_macro_mode(struct device *dev, @@ -320,7 +340,11 @@ static ssize_t k90_show_current_profile(struct device *dev, struct usb_interface *usbif = to_usb_interface(dev->parent); struct usb_device *usbdev = interface_to_usbdev(usbif); int current_profile; - char data[8]; + char *data; + + data = kmalloc(8, GFP_KERNEL); + if (!data) + return -ENOMEM; ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), K90_REQUEST_STATUS, @@ -330,16 +354,22 @@ static ssize_t k90_show_current_profile(struct device *dev, if (ret < 0) { dev_warn(dev, "Failed to get K90 initial state (error %d).\n", ret); - return -EIO; + ret = -EIO; + goto out; } current_profile = data[7]; if (current_profile < 1 || current_profile > 3) { dev_warn(dev, "Read invalid current profile: %02hhx.\n", data[7]); - return -EIO; + ret = -EIO; + goto out; } - return snprintf(buf, PAGE_SIZE, "%d\n", current_profile); + ret = snprintf(buf, PAGE_SIZE, "%d\n", current_profile); +out: + kfree(data); + + return ret; } static ssize_t k90_store_current_profile(struct device *dev, From 7a546af50eb78ab99840903083231eb635c8a566 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 12 Jan 2017 18:17:43 +0100 Subject: [PATCH 432/645] HID: corsair: fix control-transfer error handling Make sure to check for short control transfers in order to avoid parsing uninitialised buffer data and leaking it to user space. Note that the backlight and macro-mode buffer constraints are kept as loose as possible in order to avoid any regressions should the current buffer sizes be larger than necessary. Fixes: 6f78193ee9ea ("HID: corsair: Add Corsair Vengeance K90 driver") Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Jiri Kosina --- drivers/hid/hid-corsair.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-corsair.c b/drivers/hid/hid-corsair.c index 5971907a23b1..c0303f61c26a 100644 --- a/drivers/hid/hid-corsair.c +++ b/drivers/hid/hid-corsair.c @@ -159,7 +159,7 @@ static enum led_brightness k90_backlight_get(struct led_classdev *led_cdev) USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, 0, data, 8, USB_CTRL_SET_TIMEOUT); - if (ret < 0) { + if (ret < 5) { dev_warn(dev, "Failed to get K90 initial state (error %d).\n", ret); ret = -EIO; @@ -274,7 +274,7 @@ static ssize_t k90_show_macro_mode(struct device *dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, 0, data, 2, USB_CTRL_SET_TIMEOUT); - if (ret < 0) { + if (ret < 1) { dev_warn(dev, "Failed to get K90 initial mode (error %d).\n", ret); ret = -EIO; @@ -351,7 +351,7 @@ static ssize_t k90_show_current_profile(struct device *dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, 0, data, 8, USB_CTRL_SET_TIMEOUT); - if (ret < 0) { + if (ret < 8) { dev_warn(dev, "Failed to get K90 initial state (error %d).\n", ret); ret = -EIO; From a8a86d78d673b1c99fe9b0064739fde9e9774184 Mon Sep 17 00:00:00 2001 From: Tahsin Erdogan Date: Thu, 12 Jan 2017 12:04:04 -0800 Subject: [PATCH 433/645] fuse: clear FR_PENDING flag when moving requests out of pending queue fuse_abort_conn() moves requests from pending list to a temporary list before canceling them. This operation races with request_wait_answer() which also tries to remove the request after it gets a fatal signal. It checks FR_PENDING flag to determine whether the request is still in the pending list. Make fuse_abort_conn() clear FR_PENDING flag so that request_wait_answer() does not remove the request from temporary list. This bug causes an Oops when trying to delete an already deleted list entry in end_requests(). Fixes: ee314a870e40 ("fuse: abort: no fc->lock needed for request ending") Signed-off-by: Tahsin Erdogan Signed-off-by: Miklos Szeredi Cc: # 4.2+ --- fs/fuse/dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 70ea57c7b6bb..4e06a27ed7f8 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -2025,7 +2025,6 @@ static void end_requests(struct fuse_conn *fc, struct list_head *head) struct fuse_req *req; req = list_entry(head->next, struct fuse_req, list); req->out.h.error = -ECONNABORTED; - clear_bit(FR_PENDING, &req->flags); clear_bit(FR_SENT, &req->flags); list_del_init(&req->list); request_end(fc, req); @@ -2103,6 +2102,8 @@ void fuse_abort_conn(struct fuse_conn *fc) spin_lock(&fiq->waitq.lock); fiq->connected = 0; list_splice_init(&fiq->pending, &to_end2); + list_for_each_entry(req, &to_end2, list) + clear_bit(FR_PENDING, &req->flags); while (forget_pending(fiq)) kfree(dequeue_forget(fiq, 1, NULL)); wake_up_all_locked(&fiq->waitq); From 63e41226afc3f7a044b70325566fa86ac3142538 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Mon, 9 Jan 2017 12:18:56 +0100 Subject: [PATCH 434/645] KVM: arm/arm64: Fix occasional warning from the timer work function When a VCPU blocks (WFI) and has programmed the vtimer, we program a soft timer to expire in the future to wake up the vcpu thread when appropriate. Because such as wake up involves a vcpu kick, and the timer expire function can get called from interrupt context, and the kick may sleep, we have to schedule the kick in the work function. The work function currently has a warning that gets raised if it turns out that the timer shouldn't fire when it's run, which was added because the idea was that in that case the work should never have been cancelled. However, it turns out that this whole thing is racy and we can get spurious warnings. The problem is that we clear the armed flag in the work function, which may run in parallel with the kvm_timer_unschedule->timer_disarm() call. This results in a possible situation where the timer_disarm() call does not call cancel_work_sync(), which effectively synchronizes the completion of the work function with running the VCPU. As a result, the VCPU thread proceeds before the work function completees, causing changes to the timer state such that kvm_timer_should_fire(vcpu) returns false in the work function. All we do in the work function is to kick the VCPU, and an occasional rare extra kick never harmed anyone. Since the race above is extremely rare, we don't bother checking if the race happens but simply remove the check and the clearing of the armed flag from the work function. Reported-by: Matthias Brugger Reviewed-by: Marc Zyngier Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier --- virt/kvm/arm/arch_timer.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c index a2dbbccbb6a3..a7fe6062b65a 100644 --- a/virt/kvm/arm/arch_timer.c +++ b/virt/kvm/arm/arch_timer.c @@ -89,9 +89,6 @@ static void kvm_timer_inject_irq_work(struct work_struct *work) struct kvm_vcpu *vcpu; vcpu = container_of(work, struct kvm_vcpu, arch.timer_cpu.expired); - vcpu->arch.timer_cpu.armed = false; - - WARN_ON(!kvm_timer_should_fire(vcpu)); /* * If the vcpu is blocked we want to wake it up so that it will see From 488f94d7212b00a2ec72fb886b155f1b04c5aa98 Mon Sep 17 00:00:00 2001 From: Jintack Lim Date: Thu, 1 Dec 2016 14:32:05 -0500 Subject: [PATCH 435/645] KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systems Current KVM world switch code is unintentionally setting wrong bits to CNTHCTL_EL2 when E2H == 1, which may allow guest OS to access physical timer. Bit positions of CNTHCTL_EL2 are changing depending on HCR_EL2.E2H bit. EL1PCEN and EL1PCTEN are 1st and 0th bits when E2H is not set, but they are 11th and 10th bits respectively when E2H is set. In fact, on VHE we only need to set those bits once, not for every world switch. This is because the host kernel runs in EL2 with HCR_EL2.TGE == 1, which makes those bits have no effect for the host kernel execution. So we just set those bits once for guests, and that's it. Signed-off-by: Jintack Lim Reviewed-by: Marc Zyngier Signed-off-by: Marc Zyngier --- arch/arm/include/asm/virt.h | 5 +++++ arch/arm/kvm/arm.c | 3 +++ arch/arm64/include/asm/virt.h | 9 +++++++++ include/kvm/arm_arch_timer.h | 1 + virt/kvm/arm/arch_timer.c | 23 +++++++++++++++++++++++ virt/kvm/arm/hyp/timer-sr.c | 33 +++++++++++++++++++++------------ 6 files changed, 62 insertions(+), 12 deletions(-) diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index a2e75b84e2ae..6dae1956c74d 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -80,6 +80,11 @@ static inline bool is_kernel_in_hyp_mode(void) return false; } +static inline bool has_vhe(void) +{ + return false; +} + /* The section containing the hypervisor idmap text */ extern char __hyp_idmap_text_start[]; extern char __hyp_idmap_text_end[]; diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 11676787ad49..9d7446456e0c 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -1099,6 +1099,9 @@ static void cpu_init_hyp_mode(void *dummy) __cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr); __cpu_init_stage2(); + if (is_kernel_in_hyp_mode()) + kvm_timer_init_vhe(); + kvm_arm_init_debug(); } diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h index fea10736b11f..439f6b5d31f6 100644 --- a/arch/arm64/include/asm/virt.h +++ b/arch/arm64/include/asm/virt.h @@ -47,6 +47,7 @@ #include #include #include +#include /* * __boot_cpu_mode records what mode CPUs were booted in. @@ -80,6 +81,14 @@ static inline bool is_kernel_in_hyp_mode(void) return read_sysreg(CurrentEL) == CurrentEL_EL2; } +static inline bool has_vhe(void) +{ + if (cpus_have_const_cap(ARM64_HAS_VIRT_HOST_EXTN)) + return true; + + return false; +} + #ifdef CONFIG_ARM64_VHE extern void verify_cpu_run_el(void); #else diff --git a/include/kvm/arm_arch_timer.h b/include/kvm/arm_arch_timer.h index b717ed9d2b75..5c970ce67949 100644 --- a/include/kvm/arm_arch_timer.h +++ b/include/kvm/arm_arch_timer.h @@ -76,4 +76,5 @@ void kvm_timer_unschedule(struct kvm_vcpu *vcpu); void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu); +void kvm_timer_init_vhe(void); #endif diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c index a7fe6062b65a..6a084cd57b88 100644 --- a/virt/kvm/arm/arch_timer.c +++ b/virt/kvm/arm/arch_timer.c @@ -24,6 +24,7 @@ #include #include +#include #include #include @@ -509,3 +510,25 @@ void kvm_timer_init(struct kvm *kvm) { kvm->arch.timer.cntvoff = kvm_phys_timer_read(); } + +/* + * On VHE system, we only need to configure trap on physical timer and counter + * accesses in EL0 and EL1 once, not for every world switch. + * The host kernel runs at EL2 with HCR_EL2.TGE == 1, + * and this makes those bits have no effect for the host kernel execution. + */ +void kvm_timer_init_vhe(void) +{ + /* When HCR_EL2.E2H ==1, EL1PCEN and EL1PCTEN are shifted by 10 */ + u32 cnthctl_shift = 10; + u64 val; + + /* + * Disallow physical timer access for the guest. + * Physical counter access is allowed. + */ + val = read_sysreg(cnthctl_el2); + val &= ~(CNTHCTL_EL1PCEN << cnthctl_shift); + val |= (CNTHCTL_EL1PCTEN << cnthctl_shift); + write_sysreg(val, cnthctl_el2); +} diff --git a/virt/kvm/arm/hyp/timer-sr.c b/virt/kvm/arm/hyp/timer-sr.c index 798866a8d875..63e28dd18bb0 100644 --- a/virt/kvm/arm/hyp/timer-sr.c +++ b/virt/kvm/arm/hyp/timer-sr.c @@ -35,10 +35,16 @@ void __hyp_text __timer_save_state(struct kvm_vcpu *vcpu) /* Disable the virtual timer */ write_sysreg_el0(0, cntv_ctl); - /* Allow physical timer/counter access for the host */ - val = read_sysreg(cnthctl_el2); - val |= CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN; - write_sysreg(val, cnthctl_el2); + /* + * We don't need to do this for VHE since the host kernel runs in EL2 + * with HCR_EL2.TGE ==1, which makes those bits have no impact. + */ + if (!has_vhe()) { + /* Allow physical timer/counter access for the host */ + val = read_sysreg(cnthctl_el2); + val |= CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN; + write_sysreg(val, cnthctl_el2); + } /* Clear cntvoff for the host */ write_sysreg(0, cntvoff_el2); @@ -50,14 +56,17 @@ void __hyp_text __timer_restore_state(struct kvm_vcpu *vcpu) struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; u64 val; - /* - * Disallow physical timer access for the guest - * Physical counter access is allowed - */ - val = read_sysreg(cnthctl_el2); - val &= ~CNTHCTL_EL1PCEN; - val |= CNTHCTL_EL1PCTEN; - write_sysreg(val, cnthctl_el2); + /* Those bits are already configured at boot on VHE-system */ + if (!has_vhe()) { + /* + * Disallow physical timer access for the guest + * Physical counter access is allowed + */ + val = read_sysreg(cnthctl_el2); + val &= ~CNTHCTL_EL1PCEN; + val |= CNTHCTL_EL1PCTEN; + write_sysreg(val, cnthctl_el2); + } if (timer->enabled) { write_sysreg(kvm->arch.timer.cntvoff, cntvoff_el2); From 1193e6aeecb36c74c48c7cd0f641acbbed9ddeef Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Thu, 12 Jan 2017 09:21:56 +0000 Subject: [PATCH 436/645] KVM: arm/arm64: vgic: Fix deadlock on error handling Dmitry Vyukov reported that the syzkaller fuzzer triggered a deadlock in the vgic setup code when an error was detected, as the cleanup code tries to take a lock that is already held by the setup code. The fix is to avoid retaking the lock when cleaning up, by telling the cleanup function that we already hold it. Cc: stable@vger.kernel.org Reported-by: Dmitry Vyukov Reviewed-by: Christoffer Dall Reviewed-by: Eric Auger Signed-off-by: Marc Zyngier --- virt/kvm/arm/vgic/vgic-init.c | 18 +++++++++++++----- virt/kvm/arm/vgic/vgic-v2.c | 2 -- virt/kvm/arm/vgic/vgic-v3.c | 2 -- 3 files changed, 13 insertions(+), 9 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c index 5114391b7e5a..c737ea0a310a 100644 --- a/virt/kvm/arm/vgic/vgic-init.c +++ b/virt/kvm/arm/vgic/vgic-init.c @@ -268,15 +268,11 @@ static void kvm_vgic_dist_destroy(struct kvm *kvm) { struct vgic_dist *dist = &kvm->arch.vgic; - mutex_lock(&kvm->lock); - dist->ready = false; dist->initialized = false; kfree(dist->spis); dist->nr_spis = 0; - - mutex_unlock(&kvm->lock); } void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu) @@ -286,7 +282,8 @@ void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu) INIT_LIST_HEAD(&vgic_cpu->ap_list_head); } -void kvm_vgic_destroy(struct kvm *kvm) +/* To be called with kvm->lock held */ +static void __kvm_vgic_destroy(struct kvm *kvm) { struct kvm_vcpu *vcpu; int i; @@ -297,6 +294,13 @@ void kvm_vgic_destroy(struct kvm *kvm) kvm_vgic_vcpu_destroy(vcpu); } +void kvm_vgic_destroy(struct kvm *kvm) +{ + mutex_lock(&kvm->lock); + __kvm_vgic_destroy(kvm); + mutex_unlock(&kvm->lock); +} + /** * vgic_lazy_init: Lazy init is only allowed if the GIC exposed to the guest * is a GICv2. A GICv3 must be explicitly initialized by the guest using the @@ -348,6 +352,10 @@ int kvm_vgic_map_resources(struct kvm *kvm) ret = vgic_v2_map_resources(kvm); else ret = vgic_v3_map_resources(kvm); + + if (ret) + __kvm_vgic_destroy(kvm); + out: mutex_unlock(&kvm->lock); return ret; diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c index 9bab86757fa4..834137e7b83f 100644 --- a/virt/kvm/arm/vgic/vgic-v2.c +++ b/virt/kvm/arm/vgic/vgic-v2.c @@ -293,8 +293,6 @@ int vgic_v2_map_resources(struct kvm *kvm) dist->ready = true; out: - if (ret) - kvm_vgic_destroy(kvm); return ret; } diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c index 5c9f9745e6ca..e6b03fd8c374 100644 --- a/virt/kvm/arm/vgic/vgic-v3.c +++ b/virt/kvm/arm/vgic/vgic-v3.c @@ -302,8 +302,6 @@ int vgic_v3_map_resources(struct kvm *kvm) dist->ready = true; out: - if (ret) - kvm_vgic_destroy(kvm); return ret; } From dbef53621116474bb883f76f0ba6b7640bc42332 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Jan 2017 13:32:51 +0100 Subject: [PATCH 437/645] mac80211: prevent skb/txq mismatch Station structure is considered as not uploaded (to driver) until drv_sta_state() finishes. This call is however done after the structure is attached to mac80211 internal lists and hashes. This means mac80211 can lookup (and use) station structure before it is uploaded to a driver. If this happens (structure exists, but sta->uploaded is false) fast_tx path can still be taken. Deep in the fastpath call the sta->uploaded is checked against to derive "pubsta" argument for ieee80211_get_txq(). If sta->uploaded is false (and sta is actually non-NULL) ieee80211_get_txq() effectively downgraded to vif->txq. At first glance this may look innocent but coerces mac80211 into a state that is almost guaranteed (codel may drop offending skb) to crash because a station-oriented skb gets queued up on vif-oriented txq. The ieee80211_tx_dequeue() ends up looking at info->control.flags and tries to use txq->sta which in the fail case is NULL. It's probably pointless to pretend one can downgrade skb from sta-txq to vif-txq. Since downgrading unicast traffic to vif->txq must not be done there's no txq to put a frame on if sta->uploaded is false. Therefore the code is made to fall back to regular tx() op path if the described condition is hit. Only drivers using wake_tx_queue were affected. Example crash dump before fix: Unable to handle kernel paging request at virtual address ffffe26c PC is at ieee80211_tx_dequeue+0x204/0x690 [mac80211] [] (ieee80211_tx_dequeue [mac80211]) from [] (ath10k_mac_tx_push_txq+0x54/0x1c0 [ath10k_core]) [] (ath10k_mac_tx_push_txq [ath10k_core]) from [] (ath10k_htt_txrx_compl_task+0xd78/0x11d0 [ath10k_core]) [] (ath10k_htt_txrx_compl_task [ath10k_core]) [] (ath10k_pci_napi_poll+0x54/0xe8 [ath10k_pci]) [] (ath10k_pci_napi_poll [ath10k_pci]) from [] (net_rx_action+0xac/0x160) Reported-by: Mohammed Shafi Shajakhan Signed-off-by: Michal Kazior Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 0d8b716e509e..797e847cbc49 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1243,7 +1243,7 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local, struct ieee80211_vif *vif, - struct ieee80211_sta *pubsta, + struct sta_info *sta, struct sk_buff *skb) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; @@ -1257,10 +1257,13 @@ static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local, if (!ieee80211_is_data(hdr->frame_control)) return NULL; - if (pubsta) { + if (sta) { u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; - txq = pubsta->txq[tid]; + if (!sta->uploaded) + return NULL; + + txq = sta->sta.txq[tid]; } else if (vif) { txq = vif->txq; } @@ -1503,23 +1506,17 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local, struct fq *fq = &local->fq; struct ieee80211_vif *vif; struct txq_info *txqi; - struct ieee80211_sta *pubsta; if (!local->ops->wake_tx_queue || sdata->vif.type == NL80211_IFTYPE_MONITOR) return false; - if (sta && sta->uploaded) - pubsta = &sta->sta; - else - pubsta = NULL; - if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap); vif = &sdata->vif; - txqi = ieee80211_get_txq(local, vif, pubsta, skb); + txqi = ieee80211_get_txq(local, vif, sta, skb); if (!txqi) return false; From c57a94ffd0105d58ab104fe383148c5eda5aa033 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 11 Jan 2017 10:16:12 -0500 Subject: [PATCH 438/645] drm/msm/mdp5: rip out plane->pending tracking It would race between userspace thread and commit worker. Ie. vblank irq would trigger event and userspace could begin the next atomic update, before the commit worker had a chance to clear the pending flag. If we do end up needing something to prevent userspace from trying another pageflip before getting vblank event, it should probably be implemented as a pending_planes bitmask, similar to pending_crtcs. See start_atomic() and end_atomic(). Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c | 6 ------ drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h | 4 ---- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 22 ---------------------- 3 files changed, 32 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c index 5f6cd8745dbc..c396d459a9d0 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c @@ -119,13 +119,7 @@ static void mdp5_prepare_commit(struct msm_kms *kms, struct drm_atomic_state *st static void mdp5_complete_commit(struct msm_kms *kms, struct drm_atomic_state *state) { - int i; struct mdp5_kms *mdp5_kms = to_mdp5_kms(to_mdp_kms(kms)); - struct drm_plane *plane; - struct drm_plane_state *plane_state; - - for_each_plane_in_state(state, plane, plane_state, i) - mdp5_plane_complete_commit(plane, plane_state); if (mdp5_kms->smp) mdp5_smp_complete_commit(mdp5_kms->smp, &mdp5_kms->state->smp); diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h index 17b0cc101171..cdfc63d90c7b 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h @@ -104,8 +104,6 @@ struct mdp5_plane_state { /* assigned by crtc blender */ enum mdp_mixer_stage_id stage; - - bool pending : 1; }; #define to_mdp5_plane_state(x) \ container_of(x, struct mdp5_plane_state, base) @@ -232,8 +230,6 @@ int mdp5_irq_domain_init(struct mdp5_kms *mdp5_kms); void mdp5_irq_domain_fini(struct mdp5_kms *mdp5_kms); uint32_t mdp5_plane_get_flush(struct drm_plane *plane); -void mdp5_plane_complete_commit(struct drm_plane *plane, - struct drm_plane_state *state); enum mdp5_pipe mdp5_plane_pipe(struct drm_plane *plane); struct drm_plane *mdp5_plane_init(struct drm_device *dev, bool primary); diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index c099da7bc212..25d9d0a97156 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -179,7 +179,6 @@ mdp5_plane_atomic_print_state(struct drm_printer *p, drm_printf(p, "\tzpos=%u\n", pstate->zpos); drm_printf(p, "\talpha=%u\n", pstate->alpha); drm_printf(p, "\tstage=%s\n", stage2name(pstate->stage)); - drm_printf(p, "\tpending=%u\n", pstate->pending); } static void mdp5_plane_reset(struct drm_plane *plane) @@ -220,8 +219,6 @@ mdp5_plane_duplicate_state(struct drm_plane *plane) if (mdp5_state && mdp5_state->base.fb) drm_framebuffer_reference(mdp5_state->base.fb); - mdp5_state->pending = false; - return &mdp5_state->base; } @@ -288,13 +285,6 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, DBG("%s: check (%d -> %d)", plane->name, plane_enabled(old_state), plane_enabled(state)); - /* We don't allow faster-than-vblank updates.. if we did add this - * some day, we would need to disallow in cases where hwpipe - * changes - */ - if (WARN_ON(to_mdp5_plane_state(old_state)->pending)) - return -EBUSY; - max_width = config->hw->lm.max_width << 16; max_height = config->hw->lm.max_height << 16; @@ -370,12 +360,9 @@ static void mdp5_plane_atomic_update(struct drm_plane *plane, struct drm_plane_state *old_state) { struct drm_plane_state *state = plane->state; - struct mdp5_plane_state *mdp5_state = to_mdp5_plane_state(state); DBG("%s: update", plane->name); - mdp5_state->pending = true; - if (plane_enabled(state)) { int ret; @@ -851,15 +838,6 @@ uint32_t mdp5_plane_get_flush(struct drm_plane *plane) return pstate->hwpipe->flush_mask; } -/* called after vsync in thread context */ -void mdp5_plane_complete_commit(struct drm_plane *plane, - struct drm_plane_state *state) -{ - struct mdp5_plane_state *pstate = to_mdp5_plane_state(plane->state); - - pstate->pending = false; -} - /* initialize plane */ struct drm_plane *mdp5_plane_init(struct drm_device *dev, bool primary) { From de85d2b35ac74f6be769573d4a8708c823219900 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 12 Jan 2017 17:41:44 -0500 Subject: [PATCH 439/645] drm/msm: fix potential null ptr issue in non-iommu case Fixes: 9cb07b099fb ("drm/msm: support multiple address spaces") Reported-by: Riku Voipio Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 5 ++--- drivers/gpu/drm/msm/msm_gem.c | 2 ++ 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 14ff87686a36..686a580c711a 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -345,7 +345,6 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev, { struct adreno_platform_config *config = pdev->dev.platform_data; struct msm_gpu *gpu = &adreno_gpu->base; - struct msm_mmu *mmu; int ret; adreno_gpu->funcs = funcs; @@ -385,8 +384,8 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev, return ret; } - mmu = gpu->aspace->mmu; - if (mmu) { + if (gpu->aspace && gpu->aspace->mmu) { + struct msm_mmu *mmu = gpu->aspace->mmu; ret = mmu->funcs->attach(mmu, iommu_ports, ARRAY_SIZE(iommu_ports)); if (ret) diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index d8bc59c7e261..8098677a3916 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -294,6 +294,8 @@ put_iova(struct drm_gem_object *obj) WARN_ON(!mutex_is_locked(&dev->struct_mutex)); for (id = 0; id < ARRAY_SIZE(msm_obj->domain); id++) { + if (!priv->aspace[id]) + continue; msm_gem_unmap_vma(priv->aspace[id], &msm_obj->domain[id], msm_obj->sgt); } From 94a6fa899d2cb5ee76933406df32996576a562e4 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Thu, 12 Jan 2017 08:24:16 -0700 Subject: [PATCH 440/645] vfio/type1: Remove pid_namespace.h include Using has_capability() rather than ns_capable(), we're no longer using this header. Cc: Jike Song Cc: Kirti Wankhede Signed-off-by: Alex Williamson --- drivers/vfio/vfio_iommu_type1.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 77373e51b283..b3cc33fa6d26 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -36,7 +36,6 @@ #include #include #include -#include #include #include From 210675270caa33253e4c33f3c5e657e7d6060812 Mon Sep 17 00:00:00 2001 From: David Sheets Date: Fri, 13 Jan 2017 15:58:30 +0000 Subject: [PATCH 441/645] fuse: fix time_to_jiffies nsec sanity check Commit bcb6f6d2b9c2 ("fuse: use timespec64") introduced clamped nsec values in time_to_jiffies but used the max of nsec and NSEC_PER_SEC - 1 instead of the min. Because of this, dentries would stay in the cache longer than requested and go stale in scenarios that relied on their timely eviction. Fixes: bcb6f6d2b9c2 ("fuse: use timespec64") Signed-off-by: David Sheets Signed-off-by: Miklos Szeredi Cc: # 4.9 --- fs/fuse/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 1f7c732f32b0..811fd8929a18 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -68,7 +68,7 @@ static u64 time_to_jiffies(u64 sec, u32 nsec) if (sec || nsec) { struct timespec64 ts = { sec, - max_t(u32, nsec, NSEC_PER_SEC - 1) + min_t(u32, nsec, NSEC_PER_SEC - 1) }; return get_jiffies_64() + timespec64_to_jiffies(&ts); From ed79c9d34f4f4c5842b66cab840315e7ac29f666 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 13 Jan 2017 11:46:39 +0100 Subject: [PATCH 442/645] ARM: put types.h in uapi Due to the way kbuild works, this header was unintentionally exported back in 2013 when it was created, despite it not being in a uapi/ directory. This is very non-intuitive behaviour by Kbuild. However, we've had this include exported to userland for almost four years, and searching google for "ARM types.h __UINTPTR_TYPE__" gives no hint that anyone has complained about it. So, let's make it officially exported in this state. Signed-off-by: Nicolas Dichtel Signed-off-by: Russell King --- arch/arm/include/{ => uapi}/asm/types.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) rename arch/arm/include/{ => uapi}/asm/types.h (94%) diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/uapi/asm/types.h similarity index 94% rename from arch/arm/include/asm/types.h rename to arch/arm/include/uapi/asm/types.h index a53cdb8f068c..9435a42f575e 100644 --- a/arch/arm/include/asm/types.h +++ b/arch/arm/include/uapi/asm/types.h @@ -1,5 +1,5 @@ -#ifndef _ASM_TYPES_H -#define _ASM_TYPES_H +#ifndef _UAPI_ASM_TYPES_H +#define _UAPI_ASM_TYPES_H #include @@ -37,4 +37,4 @@ #define __UINTPTR_TYPE__ unsigned long #endif -#endif /* _ASM_TYPES_H */ +#endif /* _UAPI_ASM_TYPES_H */ From 69bcc0b7140c30de552aa3ef08322295862e8e2f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Wed, 11 Jan 2017 18:27:25 +0900 Subject: [PATCH 443/645] Revert "drm/amdgpu: Only update the CUR_SIZE register when necessary" This reverts commits 7c83d7abc9997cf1efac2c0ce384b5e8453ee870 and a1f49cc179ce6b7b7758ae3ff5cdb138d0ee0f56. They caused the HW cursor to disappear under various circumstances in the wild. I wasn't able to reproduce any of them, and I'm not sure what's going on. But those changes aren't a big deal anyway, so let's just revert for now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191291 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99143 Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 22 +++++++--------------- drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 22 +++++++--------------- drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 24 +++++++++--------------- drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 22 +++++++--------------- 4 files changed, 30 insertions(+), 60 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c index 9999dc71b998..ccb5e02e7b20 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -2512,6 +2512,8 @@ static int dce_v10_0_cursor_move_locked(struct drm_crtc *crtc, WREG32(mmCUR_POSITION + amdgpu_crtc->crtc_offset, (x << 16) | y); WREG32(mmCUR_HOT_SPOT + amdgpu_crtc->crtc_offset, (xorigin << 16) | yorigin); + WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, + ((amdgpu_crtc->cursor_width - 1) << 16) | (amdgpu_crtc->cursor_height - 1)); return 0; } @@ -2537,7 +2539,6 @@ static int dce_v10_0_crtc_cursor_set2(struct drm_crtc *crtc, int32_t hot_y) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct amdgpu_device *adev = crtc->dev->dev_private; struct drm_gem_object *obj; struct amdgpu_bo *aobj; int ret; @@ -2578,7 +2579,9 @@ static int dce_v10_0_crtc_cursor_set2(struct drm_crtc *crtc, dce_v10_0_lock_cursor(crtc, true); - if (hot_x != amdgpu_crtc->cursor_hot_x || + if (width != amdgpu_crtc->cursor_width || + height != amdgpu_crtc->cursor_height || + hot_x != amdgpu_crtc->cursor_hot_x || hot_y != amdgpu_crtc->cursor_hot_y) { int x, y; @@ -2587,16 +2590,10 @@ static int dce_v10_0_crtc_cursor_set2(struct drm_crtc *crtc, dce_v10_0_cursor_move_locked(crtc, x, y); - amdgpu_crtc->cursor_hot_x = hot_x; - amdgpu_crtc->cursor_hot_y = hot_y; - } - - if (width != amdgpu_crtc->cursor_width || - height != amdgpu_crtc->cursor_height) { - WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, - (width - 1) << 16 | (height - 1)); amdgpu_crtc->cursor_width = width; amdgpu_crtc->cursor_height = height; + amdgpu_crtc->cursor_hot_x = hot_x; + amdgpu_crtc->cursor_hot_y = hot_y; } dce_v10_0_show_cursor(crtc); @@ -2620,7 +2617,6 @@ unpin: static void dce_v10_0_cursor_reset(struct drm_crtc *crtc) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct amdgpu_device *adev = crtc->dev->dev_private; if (amdgpu_crtc->cursor_bo) { dce_v10_0_lock_cursor(crtc, true); @@ -2628,10 +2624,6 @@ static void dce_v10_0_cursor_reset(struct drm_crtc *crtc) dce_v10_0_cursor_move_locked(crtc, amdgpu_crtc->cursor_x, amdgpu_crtc->cursor_y); - WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, - (amdgpu_crtc->cursor_width - 1) << 16 | - (amdgpu_crtc->cursor_height - 1)); - dce_v10_0_show_cursor(crtc); dce_v10_0_lock_cursor(crtc, false); diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c index 2006abbbfb62..a7af5b33a5e3 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -2532,6 +2532,8 @@ static int dce_v11_0_cursor_move_locked(struct drm_crtc *crtc, WREG32(mmCUR_POSITION + amdgpu_crtc->crtc_offset, (x << 16) | y); WREG32(mmCUR_HOT_SPOT + amdgpu_crtc->crtc_offset, (xorigin << 16) | yorigin); + WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, + ((amdgpu_crtc->cursor_width - 1) << 16) | (amdgpu_crtc->cursor_height - 1)); return 0; } @@ -2557,7 +2559,6 @@ static int dce_v11_0_crtc_cursor_set2(struct drm_crtc *crtc, int32_t hot_y) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct amdgpu_device *adev = crtc->dev->dev_private; struct drm_gem_object *obj; struct amdgpu_bo *aobj; int ret; @@ -2598,7 +2599,9 @@ static int dce_v11_0_crtc_cursor_set2(struct drm_crtc *crtc, dce_v11_0_lock_cursor(crtc, true); - if (hot_x != amdgpu_crtc->cursor_hot_x || + if (width != amdgpu_crtc->cursor_width || + height != amdgpu_crtc->cursor_height || + hot_x != amdgpu_crtc->cursor_hot_x || hot_y != amdgpu_crtc->cursor_hot_y) { int x, y; @@ -2607,16 +2610,10 @@ static int dce_v11_0_crtc_cursor_set2(struct drm_crtc *crtc, dce_v11_0_cursor_move_locked(crtc, x, y); - amdgpu_crtc->cursor_hot_x = hot_x; - amdgpu_crtc->cursor_hot_y = hot_y; - } - - if (width != amdgpu_crtc->cursor_width || - height != amdgpu_crtc->cursor_height) { - WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, - (width - 1) << 16 | (height - 1)); amdgpu_crtc->cursor_width = width; amdgpu_crtc->cursor_height = height; + amdgpu_crtc->cursor_hot_x = hot_x; + amdgpu_crtc->cursor_hot_y = hot_y; } dce_v11_0_show_cursor(crtc); @@ -2640,7 +2637,6 @@ unpin: static void dce_v11_0_cursor_reset(struct drm_crtc *crtc) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct amdgpu_device *adev = crtc->dev->dev_private; if (amdgpu_crtc->cursor_bo) { dce_v11_0_lock_cursor(crtc, true); @@ -2648,10 +2644,6 @@ static void dce_v11_0_cursor_reset(struct drm_crtc *crtc) dce_v11_0_cursor_move_locked(crtc, amdgpu_crtc->cursor_x, amdgpu_crtc->cursor_y); - WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, - (amdgpu_crtc->cursor_width - 1) << 16 | - (amdgpu_crtc->cursor_height - 1)); - dce_v11_0_show_cursor(crtc); dce_v11_0_lock_cursor(crtc, false); diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c index b4e4ec630e8c..39df6a50637f 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -1859,6 +1859,8 @@ static int dce_v6_0_cursor_move_locked(struct drm_crtc *crtc, struct amdgpu_device *adev = crtc->dev->dev_private; int xorigin = 0, yorigin = 0; + int w = amdgpu_crtc->cursor_width; + amdgpu_crtc->cursor_x = x; amdgpu_crtc->cursor_y = y; @@ -1878,6 +1880,8 @@ static int dce_v6_0_cursor_move_locked(struct drm_crtc *crtc, WREG32(mmCUR_POSITION + amdgpu_crtc->crtc_offset, (x << 16) | y); WREG32(mmCUR_HOT_SPOT + amdgpu_crtc->crtc_offset, (xorigin << 16) | yorigin); + WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, + ((w - 1) << 16) | (amdgpu_crtc->cursor_height - 1)); return 0; } @@ -1903,7 +1907,6 @@ static int dce_v6_0_crtc_cursor_set2(struct drm_crtc *crtc, int32_t hot_y) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct amdgpu_device *adev = crtc->dev->dev_private; struct drm_gem_object *obj; struct amdgpu_bo *aobj; int ret; @@ -1944,7 +1947,9 @@ static int dce_v6_0_crtc_cursor_set2(struct drm_crtc *crtc, dce_v6_0_lock_cursor(crtc, true); - if (hot_x != amdgpu_crtc->cursor_hot_x || + if (width != amdgpu_crtc->cursor_width || + height != amdgpu_crtc->cursor_height || + hot_x != amdgpu_crtc->cursor_hot_x || hot_y != amdgpu_crtc->cursor_hot_y) { int x, y; @@ -1953,16 +1958,10 @@ static int dce_v6_0_crtc_cursor_set2(struct drm_crtc *crtc, dce_v6_0_cursor_move_locked(crtc, x, y); - amdgpu_crtc->cursor_hot_x = hot_x; - amdgpu_crtc->cursor_hot_y = hot_y; - } - - if (width != amdgpu_crtc->cursor_width || - height != amdgpu_crtc->cursor_height) { - WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, - (width - 1) << 16 | (height - 1)); amdgpu_crtc->cursor_width = width; amdgpu_crtc->cursor_height = height; + amdgpu_crtc->cursor_hot_x = hot_x; + amdgpu_crtc->cursor_hot_y = hot_y; } dce_v6_0_show_cursor(crtc); @@ -1986,7 +1985,6 @@ unpin: static void dce_v6_0_cursor_reset(struct drm_crtc *crtc) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct amdgpu_device *adev = crtc->dev->dev_private; if (amdgpu_crtc->cursor_bo) { dce_v6_0_lock_cursor(crtc, true); @@ -1994,10 +1992,6 @@ static void dce_v6_0_cursor_reset(struct drm_crtc *crtc) dce_v6_0_cursor_move_locked(crtc, amdgpu_crtc->cursor_x, amdgpu_crtc->cursor_y); - WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, - (amdgpu_crtc->cursor_width - 1) << 16 | - (amdgpu_crtc->cursor_height - 1)); - dce_v6_0_show_cursor(crtc); dce_v6_0_lock_cursor(crtc, false); } diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c index 584abe834a3c..28102bb1704d 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c @@ -2363,6 +2363,8 @@ static int dce_v8_0_cursor_move_locked(struct drm_crtc *crtc, WREG32(mmCUR_POSITION + amdgpu_crtc->crtc_offset, (x << 16) | y); WREG32(mmCUR_HOT_SPOT + amdgpu_crtc->crtc_offset, (xorigin << 16) | yorigin); + WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, + ((amdgpu_crtc->cursor_width - 1) << 16) | (amdgpu_crtc->cursor_height - 1)); return 0; } @@ -2388,7 +2390,6 @@ static int dce_v8_0_crtc_cursor_set2(struct drm_crtc *crtc, int32_t hot_y) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct amdgpu_device *adev = crtc->dev->dev_private; struct drm_gem_object *obj; struct amdgpu_bo *aobj; int ret; @@ -2429,7 +2430,9 @@ static int dce_v8_0_crtc_cursor_set2(struct drm_crtc *crtc, dce_v8_0_lock_cursor(crtc, true); - if (hot_x != amdgpu_crtc->cursor_hot_x || + if (width != amdgpu_crtc->cursor_width || + height != amdgpu_crtc->cursor_height || + hot_x != amdgpu_crtc->cursor_hot_x || hot_y != amdgpu_crtc->cursor_hot_y) { int x, y; @@ -2438,16 +2441,10 @@ static int dce_v8_0_crtc_cursor_set2(struct drm_crtc *crtc, dce_v8_0_cursor_move_locked(crtc, x, y); - amdgpu_crtc->cursor_hot_x = hot_x; - amdgpu_crtc->cursor_hot_y = hot_y; - } - - if (width != amdgpu_crtc->cursor_width || - height != amdgpu_crtc->cursor_height) { - WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, - (width - 1) << 16 | (height - 1)); amdgpu_crtc->cursor_width = width; amdgpu_crtc->cursor_height = height; + amdgpu_crtc->cursor_hot_x = hot_x; + amdgpu_crtc->cursor_hot_y = hot_y; } dce_v8_0_show_cursor(crtc); @@ -2471,7 +2468,6 @@ unpin: static void dce_v8_0_cursor_reset(struct drm_crtc *crtc) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - struct amdgpu_device *adev = crtc->dev->dev_private; if (amdgpu_crtc->cursor_bo) { dce_v8_0_lock_cursor(crtc, true); @@ -2479,10 +2475,6 @@ static void dce_v8_0_cursor_reset(struct drm_crtc *crtc) dce_v8_0_cursor_move_locked(crtc, amdgpu_crtc->cursor_x, amdgpu_crtc->cursor_y); - WREG32(mmCUR_SIZE + amdgpu_crtc->crtc_offset, - (amdgpu_crtc->cursor_width - 1) << 16 | - (amdgpu_crtc->cursor_height - 1)); - dce_v8_0_show_cursor(crtc); dce_v8_0_lock_cursor(crtc, false); From 87cb12910a2ab6ed41ae951ea4d9c1cc1120199a Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Mon, 9 Jan 2017 13:22:15 +0100 Subject: [PATCH 444/645] ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available. AHCI provides the register PORTS_IMPL to let the software know which port is supported. The register must be initialized by the bootloader. However in some cases u-boot doesn't properly initialize this value (if it is not compiled with SATA support for example or if the SATA initialization fails). The DTS entry "ports-implemented" can be used to override the value in PORTS_IMPL. Without this patch the SATA will not work in the following two cases: * if there has been a failure to initialize SATA in u-boot. * if ahci_platform module has been removed and re-inserted. The reason is that the content of PORTS_IMPL is lost after the module is removed. I suspect that it's because the controller is reset by the hwmod. Cc: # v4.6+ Signed-off-by: Jean-Jacques Hiblot Acked-by: Roger Quadros [tony@atomide.com: updated comments with what goes wrong] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 1 + arch/arm/boot/dts/omap5.dtsi | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1faf24acd521..5ba161679e01 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1378,6 +1378,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; rtc: rtc@48838000 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7cd92babc41a..0844737b72b2 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -988,6 +988,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; dss: dss@58000000 { From 148d3d021cf9724fcf189ce4e525a094bbf5ce89 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 12 Jan 2017 12:09:09 -0800 Subject: [PATCH 445/645] net: systemport: Decouple flow control from __bcm_sysport_tx_reclaim The __bcm_sysport_tx_reclaim() function is used to reclaim transmit resources in different places within the driver. Most of them should not affect the state of the transit flow control. Introduce bcm_sysport_tx_clean() which cleans the ring, but does not re-enable flow control towards the networking stack, and make bcm_sysport_tx_reclaim() do the actual transmit queue flow control. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 25 ++++++++++++++++------ 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 7e8cf213fd81..744ed6ddaf37 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -710,11 +710,8 @@ static unsigned int __bcm_sysport_tx_reclaim(struct bcm_sysport_priv *priv, unsigned int c_index, last_c_index, last_tx_cn, num_tx_cbs; unsigned int pkts_compl = 0, bytes_compl = 0; struct bcm_sysport_cb *cb; - struct netdev_queue *txq; u32 hw_ind; - txq = netdev_get_tx_queue(ndev, ring->index); - /* Compute how many descriptors have been processed since last call */ hw_ind = tdma_readl(priv, TDMA_DESC_RING_PROD_CONS_INDEX(ring->index)); c_index = (hw_ind >> RING_CONS_INDEX_SHIFT) & RING_CONS_INDEX_MASK; @@ -745,9 +742,6 @@ static unsigned int __bcm_sysport_tx_reclaim(struct bcm_sysport_priv *priv, ring->c_index = c_index; - if (netif_tx_queue_stopped(txq) && pkts_compl) - netif_tx_wake_queue(txq); - netif_dbg(priv, tx_done, ndev, "ring=%d c_index=%d pkts_compl=%d, bytes_compl=%d\n", ring->index, ring->c_index, pkts_compl, bytes_compl); @@ -759,16 +753,33 @@ static unsigned int __bcm_sysport_tx_reclaim(struct bcm_sysport_priv *priv, static unsigned int bcm_sysport_tx_reclaim(struct bcm_sysport_priv *priv, struct bcm_sysport_tx_ring *ring) { + struct netdev_queue *txq; unsigned int released; unsigned long flags; + txq = netdev_get_tx_queue(priv->netdev, ring->index); + spin_lock_irqsave(&ring->lock, flags); released = __bcm_sysport_tx_reclaim(priv, ring); + if (released) + netif_tx_wake_queue(txq); + spin_unlock_irqrestore(&ring->lock, flags); return released; } +/* Locked version of the per-ring TX reclaim, but does not wake the queue */ +static void bcm_sysport_tx_clean(struct bcm_sysport_priv *priv, + struct bcm_sysport_tx_ring *ring) +{ + unsigned long flags; + + spin_lock_irqsave(&ring->lock, flags); + __bcm_sysport_tx_reclaim(priv, ring); + spin_unlock_irqrestore(&ring->lock, flags); +} + static int bcm_sysport_tx_poll(struct napi_struct *napi, int budget) { struct bcm_sysport_tx_ring *ring = @@ -1252,7 +1263,7 @@ static void bcm_sysport_fini_tx_ring(struct bcm_sysport_priv *priv, napi_disable(&ring->napi); netif_napi_del(&ring->napi); - bcm_sysport_tx_reclaim(priv, ring); + bcm_sysport_tx_clean(priv, ring); kfree(ring->cbs); ring->cbs = NULL; From fa79581ea66ca43d56ef065346ac5be767fcb418 Mon Sep 17 00:00:00 2001 From: David Lebrun Date: Thu, 12 Jan 2017 21:30:01 +0100 Subject: [PATCH 446/645] ipv6: sr: fix several BUGs when preemption is enabled When CONFIG_PREEMPT=y, CONFIG_IPV6=m and CONFIG_SEG6_HMAC=y, seg6_hmac_init() is called during the initialization of the ipv6 module. This causes a subsequent call to smp_processor_id() with preemption enabled, resulting in the following trace. [ 20.451460] BUG: using smp_processor_id() in preemptible [00000000] code: systemd/1 [ 20.452556] caller is debug_smp_processor_id+0x17/0x19 [ 20.453304] CPU: 0 PID: 1 Comm: systemd Not tainted 4.9.0-rc5-00973-g46738b1 #1 [ 20.454406] ffffc9000062fc18 ffffffff813607b2 0000000000000000 ffffffff81a7f782 [ 20.455528] ffffc9000062fc48 ffffffff813778dc 0000000000000000 00000000001dcf98 [ 20.456539] ffffffffa003bd08 ffffffff81af93e0 ffffc9000062fc58 ffffffff81377905 [ 20.456539] Call Trace: [ 20.456539] [] dump_stack+0x63/0x7f [ 20.456539] [] check_preemption_disabled+0xd1/0xe3 [ 20.456539] [] debug_smp_processor_id+0x17/0x19 [ 20.460260] [] seg6_hmac_init+0xfa/0x192 [ipv6] [ 20.460260] [] seg6_init+0x39/0x6f [ipv6] [ 20.460260] [] inet6_init+0x21a/0x321 [ipv6] [ 20.460260] [] ? 0xffffffffa0061000 [ 20.460260] [] do_one_initcall+0x8b/0x115 [ 20.460260] [] do_init_module+0x53/0x1c4 [ 20.460260] [] load_module+0x1153/0x14ec [ 20.460260] [] SYSC_finit_module+0x8c/0xb9 [ 20.460260] [] ? SYSC_finit_module+0x8c/0xb9 [ 20.460260] [] SyS_finit_module+0x9/0xb [ 20.460260] [] do_syscall_64+0x62/0x75 [ 20.460260] [] entry_SYSCALL64_slow_path+0x25/0x25 Moreover, dst_cache_* functions also call smp_processor_id(), generating a similar trace. This patch uses raw_cpu_ptr() in seg6_hmac_init() rather than this_cpu_ptr() and disable preemption when using dst_cache_* functions. Signed-off-by: David Lebrun Signed-off-by: David S. Miller --- net/ipv6/seg6_hmac.c | 2 +- net/ipv6/seg6_iptunnel.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv6/seg6_hmac.c b/net/ipv6/seg6_hmac.c index ef1c8a46e7ac..03a064803626 100644 --- a/net/ipv6/seg6_hmac.c +++ b/net/ipv6/seg6_hmac.c @@ -400,7 +400,7 @@ static int seg6_hmac_init_algo(void) *p_tfm = tfm; } - p_tfm = this_cpu_ptr(algo->tfms); + p_tfm = raw_cpu_ptr(algo->tfms); tfm = *p_tfm; shsize = sizeof(*shash) + crypto_shash_descsize(tfm); diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c index bbfca22c34ae..1d60cb132835 100644 --- a/net/ipv6/seg6_iptunnel.c +++ b/net/ipv6/seg6_iptunnel.c @@ -265,7 +265,9 @@ int seg6_output(struct net *net, struct sock *sk, struct sk_buff *skb) slwt = seg6_lwt_lwtunnel(orig_dst->lwtstate); #ifdef CONFIG_DST_CACHE + preempt_disable(); dst = dst_cache_get(&slwt->cache); + preempt_enable(); #endif if (unlikely(!dst)) { @@ -286,7 +288,9 @@ int seg6_output(struct net *net, struct sock *sk, struct sk_buff *skb) } #ifdef CONFIG_DST_CACHE + preempt_disable(); dst_cache_set_ip6(&slwt->cache, dst, &fl6.saddr); + preempt_enable(); #endif } From 003c941057eaa868ca6fedd29a274c863167230d Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Thu, 12 Jan 2017 14:24:58 -0800 Subject: [PATCH 447/645] tcp: fix tcp_fastopen unaligned access complaints on sparc Fix up a data alignment issue on sparc by swapping the order of the cookie byte array field with the length field in struct tcp_fastopen_cookie, and making it a proper union to clean up the typecasting. This addresses log complaints like these: log_unaligned: 113 callbacks suppressed Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360 Kernel unaligned access at TPC[9764ac] tcp_try_fastopen+0x2ec/0x360 Kernel unaligned access at TPC[9764c8] tcp_try_fastopen+0x308/0x360 Kernel unaligned access at TPC[9764e4] tcp_try_fastopen+0x324/0x360 Kernel unaligned access at TPC[976490] tcp_try_fastopen+0x2d0/0x360 Cc: Eric Dumazet Signed-off-by: Shannon Nelson Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/tcp.h | 7 ++++++- net/ipv4/tcp_fastopen.c | 2 +- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/linux/tcp.h b/include/linux/tcp.h index fc5848dad7a4..c93f4b3a59cb 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -62,8 +62,13 @@ static inline unsigned int tcp_optlen(const struct sk_buff *skb) /* TCP Fast Open Cookie as stored in memory */ struct tcp_fastopen_cookie { + union { + u8 val[TCP_FASTOPEN_COOKIE_MAX]; +#if IS_ENABLED(CONFIG_IPV6) + struct in6_addr addr; +#endif + }; s8 len; - u8 val[TCP_FASTOPEN_COOKIE_MAX]; bool exp; /* In RFC6994 experimental option format */ }; diff --git a/net/ipv4/tcp_fastopen.c b/net/ipv4/tcp_fastopen.c index 4e777a3243f9..f51919535ca7 100644 --- a/net/ipv4/tcp_fastopen.c +++ b/net/ipv4/tcp_fastopen.c @@ -113,7 +113,7 @@ static bool tcp_fastopen_cookie_gen(struct request_sock *req, struct tcp_fastopen_cookie tmp; if (__tcp_fastopen_cookie_gen(&ip6h->saddr, &tmp)) { - struct in6_addr *buf = (struct in6_addr *) tmp.val; + struct in6_addr *buf = &tmp.addr; int i; for (i = 0; i < 4; i++) From 1f19b983a8877f81763fab3e693c6befe212736d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 9 Jan 2017 17:30:49 -0800 Subject: [PATCH 448/645] libnvdimm, namespace: fix pmem namespace leak, delete when size set to zero Commit 98a29c39dc68 ("libnvdimm, namespace: allow creation of multiple pmem-namespaces per region") added support for establishing additional pmem namespace beyond the seed device, similar to blk namespaces. However, it neglected to delete the namespace when the size is set to zero. Fixes: 98a29c39dc68 ("libnvdimm, namespace: allow creation of multiple pmem-namespaces per region") Cc: Signed-off-by: Dan Williams --- drivers/nvdimm/namespace_devs.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/nvdimm/namespace_devs.c b/drivers/nvdimm/namespace_devs.c index 6307088b375f..a518cb1b59d4 100644 --- a/drivers/nvdimm/namespace_devs.c +++ b/drivers/nvdimm/namespace_devs.c @@ -957,6 +957,7 @@ static ssize_t __size_store(struct device *dev, unsigned long long val) { resource_size_t allocated = 0, available = 0; struct nd_region *nd_region = to_nd_region(dev->parent); + struct nd_namespace_common *ndns = to_ndns(dev); struct nd_mapping *nd_mapping; struct nvdimm_drvdata *ndd; struct nd_label_id label_id; @@ -964,7 +965,7 @@ static ssize_t __size_store(struct device *dev, unsigned long long val) u8 *uuid = NULL; int rc, i; - if (dev->driver || to_ndns(dev)->claim) + if (dev->driver || ndns->claim) return -EBUSY; if (is_namespace_pmem(dev)) { @@ -1034,20 +1035,16 @@ static ssize_t __size_store(struct device *dev, unsigned long long val) nd_namespace_pmem_set_resource(nd_region, nspm, val * nd_region->ndr_mappings); - } else if (is_namespace_blk(dev)) { - struct nd_namespace_blk *nsblk = to_nd_namespace_blk(dev); - - /* - * Try to delete the namespace if we deleted all of its - * allocation, this is not the seed device for the - * region, and it is not actively claimed by a btt - * instance. - */ - if (val == 0 && nd_region->ns_seed != dev - && !nsblk->common.claim) - nd_device_unregister(dev, ND_ASYNC); } + /* + * Try to delete the namespace if we deleted all of its + * allocation, this is not the seed device for the region, and + * it is not actively claimed by a btt instance. + */ + if (val == 0 && nd_region->ns_seed != dev && !ndns->claim) + nd_device_unregister(dev, ND_ASYNC); + return rc; } From da72ff5bfcb02c6ac8b169a7cf597a3c8e6c4de1 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 13 Jan 2017 10:07:23 -0800 Subject: [PATCH 449/645] partially revert "xen: Remove event channel notification through Xen PCI platform device" Commit 72a9b186292d ("xen: Remove event channel notification through Xen PCI platform device") broke Linux when booting as Dom0 on Xen in a nested Xen environment (Xen installed inside a Xen VM). In this scenario, Linux is a PV guest, but at the same time it uses the platform-pci driver to receive notifications from L0 Xen. vector callbacks are not available because L1 Xen doesn't allow them. Partially revert the offending commit, by restoring IRQ based notifications for PV guests only. I restored only the code which is strictly needed and replaced the xen_have_vector_callback checks within it with xen_pv_domain() checks. Signed-off-by: Stefano Stabellini Reviewed-by: Boris Ostrovsky --- drivers/xen/platform-pci.c | 71 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index 112ce422dc22..2a165cc8a43c 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -42,6 +42,7 @@ static unsigned long platform_mmio; static unsigned long platform_mmio_alloc; static unsigned long platform_mmiolen; +static uint64_t callback_via; static unsigned long alloc_xen_mmio(unsigned long len) { @@ -54,6 +55,51 @@ static unsigned long alloc_xen_mmio(unsigned long len) return addr; } +static uint64_t get_callback_via(struct pci_dev *pdev) +{ + u8 pin; + int irq; + + irq = pdev->irq; + if (irq < 16) + return irq; /* ISA IRQ */ + + pin = pdev->pin; + + /* We don't know the GSI. Specify the PCI INTx line instead. */ + return ((uint64_t)0x01 << HVM_CALLBACK_VIA_TYPE_SHIFT) | /* PCI INTx identifier */ + ((uint64_t)pci_domain_nr(pdev->bus) << 32) | + ((uint64_t)pdev->bus->number << 16) | + ((uint64_t)(pdev->devfn & 0xff) << 8) | + ((uint64_t)(pin - 1) & 3); +} + +static irqreturn_t do_hvm_evtchn_intr(int irq, void *dev_id) +{ + xen_hvm_evtchn_do_upcall(); + return IRQ_HANDLED; +} + +static int xen_allocate_irq(struct pci_dev *pdev) +{ + return request_irq(pdev->irq, do_hvm_evtchn_intr, + IRQF_NOBALANCING | IRQF_TRIGGER_RISING, + "xen-platform-pci", pdev); +} + +static int platform_pci_resume(struct pci_dev *pdev) +{ + int err; + if (!xen_pv_domain()) + return 0; + err = xen_set_callback_via(callback_via); + if (err) { + dev_err(&pdev->dev, "platform_pci_resume failure!\n"); + return err; + } + return 0; +} + static int platform_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -92,6 +138,28 @@ static int platform_pci_probe(struct pci_dev *pdev, platform_mmio = mmio_addr; platform_mmiolen = mmio_len; + /* + * Xen HVM guests always use the vector callback mechanism. + * L1 Dom0 in a nested Xen environment is a PV guest inside in an + * HVM environment. It needs the platform-pci driver to get + * notifications from L0 Xen, but it cannot use the vector callback + * as it is not exported by L1 Xen. + */ + if (xen_pv_domain()) { + ret = xen_allocate_irq(pdev); + if (ret) { + dev_warn(&pdev->dev, "request_irq failed err=%d\n", ret); + goto out; + } + callback_via = get_callback_via(pdev); + ret = xen_set_callback_via(callback_via); + if (ret) { + dev_warn(&pdev->dev, "Unable to set the evtchn callback " + "err=%d\n", ret); + goto out; + } + } + max_nr_gframes = gnttab_max_grant_frames(); grant_frames = alloc_xen_mmio(PAGE_SIZE * max_nr_gframes); ret = gnttab_setup_auto_xlat_frames(grant_frames); @@ -123,6 +191,9 @@ static struct pci_driver platform_driver = { .name = DRV_NAME, .probe = platform_pci_probe, .id_table = platform_pci_tbl, +#ifdef CONFIG_PM + .resume_early = platform_pci_resume, +#endif }; builtin_pci_driver(platform_driver); From c6180a6237174f481dc856ed6e890d8196b6f0fb Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 13 Jan 2017 13:31:32 -0500 Subject: [PATCH 450/645] NFSv4: Fix client recovery when server reboots multiple times If the server reboots multiple times, the client should rely on the server to tell it that it cannot reclaim state as per section 9.6.3.4 in RFC7530 and section 8.4.2.1 in RFC5661. Currently, the client is being to conservative, and is assuming that if the server reboots while state recovery is in progress, then it must ignore state that was not recovered before the reboot. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 1d152f4470cd..90e6193ce6be 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1729,7 +1729,6 @@ static int nfs4_recovery_handle_error(struct nfs_client *clp, int error) break; case -NFS4ERR_STALE_CLIENTID: set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state); - nfs4_state_clear_reclaim_reboot(clp); nfs4_state_start_reclaim_reboot(clp); break; case -NFS4ERR_EXPIRED: From 2e3258ecfaebace1ceffaa14e0ea94775d54f46f Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 13 Jan 2017 12:29:10 +0100 Subject: [PATCH 451/645] block: add blk_rq_payload_bytes Add a helper to calculate the actual data transfer size for special payload requests. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ff3d774f2751..1ca8e8fd1078 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1000,6 +1000,19 @@ static inline unsigned int blk_rq_cur_sectors(const struct request *rq) return blk_rq_cur_bytes(rq) >> 9; } +/* + * Some commands like WRITE SAME have a payload or data transfer size which + * is different from the size of the request. Any driver that supports such + * commands using the RQF_SPECIAL_PAYLOAD flag needs to use this helper to + * calculate the data transfer size. + */ +static inline unsigned int blk_rq_payload_bytes(struct request *rq) +{ + if (rq->rq_flags & RQF_SPECIAL_PAYLOAD) + return rq->special_vec.bv_len; + return blk_rq_bytes(rq); +} + static inline unsigned int blk_queue_get_max_sectors(struct request_queue *q, int op) { From fd102b125e174edbea34e6e7a2d371bc7901c53d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 13 Jan 2017 12:29:11 +0100 Subject: [PATCH 452/645] scsi: use blk_rq_payload_bytes Without that we'll pass a wrong payload size in cmd->sdb, which can lead to hangs with drivers that need the total transfer size. Signed-off-by: Christoph Hellwig Reported-by: Chris Valean Reported-by: Dexuan Cui Fixes: f9d03f96 ("block: improve handling of the magic discard payload") Reviewed-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index c35b6de4ca64..ad4ff8fcd4dd 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1018,7 +1018,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb) count = blk_rq_map_sg(req->q, req, sdb->table.sgl); BUG_ON(count > sdb->table.nents); sdb->table.nents = count; - sdb->length = blk_rq_bytes(req); + sdb->length = blk_rq_payload_bytes(req); return BLKPREP_OK; } From b131c61d62266eb21b0f125f63f3d07e5670d726 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 13 Jan 2017 12:29:12 +0100 Subject: [PATCH 453/645] nvme: use blk_rq_payload_bytes The new blk_rq_payload_bytes generalizes the payload length hacks that nvme_map_len did before. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Signed-off-by: Jens Axboe --- drivers/nvme/host/fc.c | 5 ++--- drivers/nvme/host/nvme.h | 8 -------- drivers/nvme/host/pci.c | 19 ++++++++----------- drivers/nvme/host/rdma.c | 13 +++++-------- 4 files changed, 15 insertions(+), 30 deletions(-) diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index aa0bc60810a7..fcc9dcfdf675 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -1654,13 +1654,12 @@ nvme_fc_map_data(struct nvme_fc_ctrl *ctrl, struct request *rq, struct nvme_fc_fcp_op *op) { struct nvmefc_fcp_req *freq = &op->fcp_req; - u32 map_len = nvme_map_len(rq); enum dma_data_direction dir; int ret; freq->sg_cnt = 0; - if (!map_len) + if (!blk_rq_payload_bytes(rq)) return 0; freq->sg_table.sgl = freq->first_sgl; @@ -1854,7 +1853,7 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx, if (ret) return ret; - data_len = nvme_map_len(rq); + data_len = blk_rq_payload_bytes(rq); if (data_len) io_dir = ((rq_data_dir(rq) == WRITE) ? NVMEFC_FCP_WRITE : NVMEFC_FCP_READ); diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 6377e14586dc..aead6d08ed2c 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -225,14 +225,6 @@ static inline u64 nvme_block_nr(struct nvme_ns *ns, sector_t sector) return (sector >> (ns->lba_shift - 9)); } -static inline unsigned nvme_map_len(struct request *rq) -{ - if (req_op(rq) == REQ_OP_DISCARD) - return sizeof(struct nvme_dsm_range); - else - return blk_rq_bytes(rq); -} - static inline void nvme_cleanup_cmd(struct request *req) { if (req->rq_flags & RQF_SPECIAL_PAYLOAD) { diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 19beeb7b2ac2..3faefabf339c 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -306,11 +306,11 @@ static __le64 **iod_list(struct request *req) return (__le64 **)(iod->sg + blk_rq_nr_phys_segments(req)); } -static int nvme_init_iod(struct request *rq, unsigned size, - struct nvme_dev *dev) +static int nvme_init_iod(struct request *rq, struct nvme_dev *dev) { struct nvme_iod *iod = blk_mq_rq_to_pdu(rq); int nseg = blk_rq_nr_phys_segments(rq); + unsigned int size = blk_rq_payload_bytes(rq); if (nseg > NVME_INT_PAGES || size > NVME_INT_BYTES(dev)) { iod->sg = kmalloc(nvme_iod_alloc_size(dev, size, nseg), GFP_ATOMIC); @@ -420,12 +420,11 @@ static void nvme_dif_complete(u32 p, u32 v, struct t10_pi_tuple *pi) } #endif -static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req, - int total_len) +static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req) { struct nvme_iod *iod = blk_mq_rq_to_pdu(req); struct dma_pool *pool; - int length = total_len; + int length = blk_rq_payload_bytes(req); struct scatterlist *sg = iod->sg; int dma_len = sg_dma_len(sg); u64 dma_addr = sg_dma_address(sg); @@ -501,7 +500,7 @@ static bool nvme_setup_prps(struct nvme_dev *dev, struct request *req, } static int nvme_map_data(struct nvme_dev *dev, struct request *req, - unsigned size, struct nvme_command *cmnd) + struct nvme_command *cmnd) { struct nvme_iod *iod = blk_mq_rq_to_pdu(req); struct request_queue *q = req->q; @@ -519,7 +518,7 @@ static int nvme_map_data(struct nvme_dev *dev, struct request *req, DMA_ATTR_NO_WARN)) goto out; - if (!nvme_setup_prps(dev, req, size)) + if (!nvme_setup_prps(dev, req)) goto out_unmap; ret = BLK_MQ_RQ_QUEUE_ERROR; @@ -580,7 +579,6 @@ static int nvme_queue_rq(struct blk_mq_hw_ctx *hctx, struct nvme_dev *dev = nvmeq->dev; struct request *req = bd->rq; struct nvme_command cmnd; - unsigned map_len; int ret = BLK_MQ_RQ_QUEUE_OK; /* @@ -600,13 +598,12 @@ static int nvme_queue_rq(struct blk_mq_hw_ctx *hctx, if (ret != BLK_MQ_RQ_QUEUE_OK) return ret; - map_len = nvme_map_len(req); - ret = nvme_init_iod(req, map_len, dev); + ret = nvme_init_iod(req, dev); if (ret != BLK_MQ_RQ_QUEUE_OK) goto out_free_cmd; if (blk_rq_nr_phys_segments(req)) - ret = nvme_map_data(dev, req, map_len, &cmnd); + ret = nvme_map_data(dev, req, &cmnd); if (ret != BLK_MQ_RQ_QUEUE_OK) goto out_cleanup_iod; diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 34e564857716..557f29b1f1bb 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -981,8 +981,7 @@ static int nvme_rdma_map_sg_fr(struct nvme_rdma_queue *queue, } static int nvme_rdma_map_data(struct nvme_rdma_queue *queue, - struct request *rq, unsigned int map_len, - struct nvme_command *c) + struct request *rq, struct nvme_command *c) { struct nvme_rdma_request *req = blk_mq_rq_to_pdu(rq); struct nvme_rdma_device *dev = queue->device; @@ -1014,9 +1013,9 @@ static int nvme_rdma_map_data(struct nvme_rdma_queue *queue, } if (count == 1) { - if (rq_data_dir(rq) == WRITE && - map_len <= nvme_rdma_inline_data_size(queue) && - nvme_rdma_queue_idx(queue)) + if (rq_data_dir(rq) == WRITE && nvme_rdma_queue_idx(queue) && + blk_rq_payload_bytes(rq) <= + nvme_rdma_inline_data_size(queue)) return nvme_rdma_map_sg_inline(queue, req, c); if (dev->pd->flags & IB_PD_UNSAFE_GLOBAL_RKEY) @@ -1444,7 +1443,6 @@ static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, struct nvme_command *c = sqe->data; bool flush = false; struct ib_device *dev; - unsigned int map_len; int ret; WARN_ON_ONCE(rq->tag < 0); @@ -1462,8 +1460,7 @@ static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, blk_mq_start_request(rq); - map_len = nvme_map_len(rq); - ret = nvme_rdma_map_data(queue, rq, map_len, c); + ret = nvme_rdma_map_data(queue, rq, c); if (ret < 0) { dev_err(queue->ctrl->ctrl.device, "Failed to map data (%d)\n", ret); From f80de881d8df967488b7343381619efa15019493 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 13 Jan 2017 12:29:13 +0100 Subject: [PATCH 454/645] sd: remove __data_len hack for WRITE SAME Now that we have the blk_rq_payload_bytes helper available to determine the actual I/O size we don't need to mess around with __data_len for WRITE SAME. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Signed-off-by: Jens Axboe --- drivers/scsi/sd.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index b1933041da39..1fbb1ecf49f2 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -836,7 +836,6 @@ static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd) struct bio *bio = rq->bio; sector_t sector = blk_rq_pos(rq); unsigned int nr_sectors = blk_rq_sectors(rq); - unsigned int nr_bytes = blk_rq_bytes(rq); int ret; if (sdkp->device->no_write_same) @@ -869,21 +868,7 @@ static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd) cmd->transfersize = sdp->sector_size; cmd->allowed = SD_MAX_RETRIES; - - /* - * For WRITE_SAME the data transferred in the DATA IN buffer is - * different from the amount of data actually written to the target. - * - * We set up __data_len to the amount of data transferred from the - * DATA IN buffer so that blk_rq_map_sg set up the proper S/G list - * to transfer a single sector of data first, but then reset it to - * the amount of data to be written right after so that the I/O path - * knows how much to actually write. - */ - rq->__data_len = sdp->sector_size; - ret = scsi_init_io(cmd); - rq->__data_len = nr_bytes; - return ret; + return scsi_init_io(cmd); } static int sd_setup_flush_cmnd(struct scsi_cmnd *cmd) From bef13315e990fd3d3fb4c39013aefd53f06c3657 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 13 Jan 2017 15:18:16 -0700 Subject: [PATCH 455/645] block: don't try to discard from __blkdev_issue_zeroout Discard can return -EIO asynchronously if the alignment for the request isn't suitable for the driver, which makes a proper fallback to other methods in __blkdev_issue_zeroout impossible. Thus only issue a sync discard from blkdev_issue_zeroout an don't try discard at all from __blkdev_issue_zeroout as a non-invasive workaround. One more reason why abusing discard for zeroing must die.. Signed-off-by: Christoph Hellwig Reported-by: Eryu Guan Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout") Signed-off-by: Jens Axboe --- block/blk-lib.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/block/blk-lib.c b/block/blk-lib.c index ed89c8f4b2a0..f8c82a9b4012 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -301,13 +301,6 @@ int __blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, if ((sector | nr_sects) & bs_mask) return -EINVAL; - if (discard) { - ret = __blkdev_issue_discard(bdev, sector, nr_sects, gfp_mask, - BLKDEV_DISCARD_ZERO, biop); - if (ret == 0 || (ret && ret != -EOPNOTSUPP)) - goto out; - } - ret = __blkdev_issue_write_zeroes(bdev, sector, nr_sects, gfp_mask, biop); if (ret == 0 || (ret && ret != -EOPNOTSUPP)) @@ -370,6 +363,12 @@ int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, struct bio *bio = NULL; struct blk_plug plug; + if (discard) { + if (!blkdev_issue_discard(bdev, sector, nr_sects, gfp_mask, + BLKDEV_DISCARD_ZERO)) + return 0; + } + blk_start_plug(&plug); ret = __blkdev_issue_zeroout(bdev, sector, nr_sects, gfp_mask, &bio, discard); From 695085b4bc7603551db0b3da897b8bf9893ca218 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 13 Jan 2017 01:11:18 -0500 Subject: [PATCH 456/645] x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc() The Intel Denverton microserver uses a 25 MHz TSC crystal, so we can derive its exact [*] TSC frequency using CPUID and some arithmetic, eg.: TSC: 1800 MHz (25000000 Hz * 216 / 3 / 1000000) [*] 'exact' is only as good as the crystal, which should be +/- 20ppm Signed-off-by: Len Brown Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/306899f94804aece6d8fa8b4223ede3b48dbb59c.1484287748.git.len.brown@intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index be3a49ee0356..e41af597aed8 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -694,6 +694,7 @@ unsigned long native_calibrate_tsc(void) crystal_khz = 24000; /* 24.0 MHz */ break; case INTEL_FAM6_SKYLAKE_X: + case INTEL_FAM6_ATOM_DENVERTON: crystal_khz = 25000; /* 25.0 MHz */ break; case INTEL_FAM6_ATOM_GOLDMONT: From 453828625731d0ba7218242ef6ec88f59408f368 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Thu, 12 Jan 2017 16:53:11 +0100 Subject: [PATCH 457/645] x86/mpx: Use compatible types in comparison to fix sparse error info->si_addr is of type void __user *, so it should be compared against something from the same address space. This fixes the following sparse error: arch/x86/mm/mpx.c:296:27: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Tobias Klauser Cc: Dave Hansen Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/mm/mpx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c index 324e5713d386..af59f808742f 100644 --- a/arch/x86/mm/mpx.c +++ b/arch/x86/mm/mpx.c @@ -293,7 +293,7 @@ siginfo_t *mpx_generate_siginfo(struct pt_regs *regs) * We were not able to extract an address from the instruction, * probably because there was something invalid in it. */ - if (info->si_addr == (void *)-1) { + if (info->si_addr == (void __user *)-1) { err = -EINVAL; goto err_out; } From 63cae12bce9861cec309798d34701cf3da20bc71 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 9 Dec 2016 14:59:00 +0100 Subject: [PATCH 458/645] perf/core: Fix sys_perf_event_open() vs. hotplug There is problem with installing an event in a task that is 'stuck' on an offline CPU. Blocked tasks are not dis-assosciated from offlined CPUs, after all, a blocked task doesn't run and doesn't require a CPU etc.. Only on wakeup do we ammend the situation and place the task on a available CPU. If we hit such a task with perf_install_in_context() we'll loop until either that task wakes up or the CPU comes back online, if the task waking depends on the event being installed, we're stuck. While looking into this issue, I also spotted another problem, if we hit a task with perf_install_in_context() that is in the middle of being migrated, that is we observe the old CPU before sending the IPI, but run the IPI (on the old CPU) while the task is already running on the new CPU, things also go sideways. Rework things to rely on task_curr() -- outside of rq->lock -- which is rather tricky. Imagine the following scenario where we're trying to install the first event into our task 't': CPU0 CPU1 CPU2 (current == t) t->perf_event_ctxp[] = ctx; smp_mb(); cpu = task_cpu(t); switch(t, n); migrate(t, 2); switch(p, t); ctx = t->perf_event_ctxp[]; // must not be NULL smp_function_call(cpu, ..); generic_exec_single() func(); spin_lock(ctx->lock); if (task_curr(t)) // false add_event_to_ctx(); spin_unlock(ctx->lock); perf_event_context_sched_in(); spin_lock(ctx->lock); // sees event So its CPU0's store of t->perf_event_ctxp[] that must not go 'missing'. Because if CPU2's load of that variable were to observe NULL, it would not try to schedule the ctx and we'd have a task running without its counter, which would be 'bad'. As long as we observe !NULL, we'll acquire ctx->lock. If we acquire it first and not see the event yet, then CPU0 must observe task_curr() and retry. If the install happens first, then we must see the event on sched-in and all is well. I think we can translate the first part (until the 'must not be NULL') of the scenario to a litmus test like: C C-peterz { } P0(int *x, int *y) { int r1; WRITE_ONCE(*x, 1); smp_mb(); r1 = READ_ONCE(*y); } P1(int *y, int *z) { WRITE_ONCE(*y, 1); smp_store_release(z, 1); } P2(int *x, int *z) { int r1; int r2; r1 = smp_load_acquire(z); smp_mb(); r2 = READ_ONCE(*x); } exists (0:r1=0 /\ 2:r1=1 /\ 2:r2=0) Where: x is perf_event_ctxp[], y is our tasks's CPU, and z is our task being placed on the rq of CPU2. The P0 smp_mb() is the one added by this patch, ordering the store to perf_event_ctxp[] from find_get_context() and the load of task_cpu() in task_function_call(). The smp_store_release/smp_load_acquire model the RCpc locking of the rq->lock and the smp_mb() of P2 is the context switch switching from whatever CPU2 was running to our task 't'. This litmus test evaluates into: Test C-peterz Allowed States 7 0:r1=0; 2:r1=0; 2:r2=0; 0:r1=0; 2:r1=0; 2:r2=1; 0:r1=0; 2:r1=1; 2:r2=1; 0:r1=1; 2:r1=0; 2:r2=0; 0:r1=1; 2:r1=0; 2:r2=1; 0:r1=1; 2:r1=1; 2:r2=0; 0:r1=1; 2:r1=1; 2:r2=1; No Witnesses Positive: 0 Negative: 7 Condition exists (0:r1=0 /\ 2:r1=1 /\ 2:r2=0) Observation C-peterz Never 0 7 Hash=e427f41d9146b2a5445101d3e2fcaa34 And the strong and weak model agree. Reported-by: Mark Rutland Tested-by: Mark Rutland Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: Will Deacon Cc: jeremy.linton@arm.com Link: http://lkml.kernel.org/r/20161209135900.GU3174@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- kernel/events/core.c | 70 ++++++++++++++++++++++++++++++-------------- 1 file changed, 48 insertions(+), 22 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index ab15509fab8c..72ce7d63e561 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2249,7 +2249,7 @@ static int __perf_install_in_context(void *info) struct perf_event_context *ctx = event->ctx; struct perf_cpu_context *cpuctx = __get_cpu_context(ctx); struct perf_event_context *task_ctx = cpuctx->task_ctx; - bool activate = true; + bool reprogram = true; int ret = 0; raw_spin_lock(&cpuctx->ctx.lock); @@ -2257,27 +2257,26 @@ static int __perf_install_in_context(void *info) raw_spin_lock(&ctx->lock); task_ctx = ctx; - /* If we're on the wrong CPU, try again */ - if (task_cpu(ctx->task) != smp_processor_id()) { + reprogram = (ctx->task == current); + + /* + * If the task is running, it must be running on this CPU, + * otherwise we cannot reprogram things. + * + * If its not running, we don't care, ctx->lock will + * serialize against it becoming runnable. + */ + if (task_curr(ctx->task) && !reprogram) { ret = -ESRCH; goto unlock; } - /* - * If we're on the right CPU, see if the task we target is - * current, if not we don't have to activate the ctx, a future - * context switch will do that for us. - */ - if (ctx->task != current) - activate = false; - else - WARN_ON_ONCE(cpuctx->task_ctx && cpuctx->task_ctx != ctx); - + WARN_ON_ONCE(reprogram && cpuctx->task_ctx && cpuctx->task_ctx != ctx); } else if (task_ctx) { raw_spin_lock(&task_ctx->lock); } - if (activate) { + if (reprogram) { ctx_sched_out(ctx, cpuctx, EVENT_TIME); add_event_to_ctx(event, ctx); ctx_resched(cpuctx, task_ctx); @@ -2328,13 +2327,36 @@ perf_install_in_context(struct perf_event_context *ctx, /* * Installing events is tricky because we cannot rely on ctx->is_active * to be set in case this is the nr_events 0 -> 1 transition. + * + * Instead we use task_curr(), which tells us if the task is running. + * However, since we use task_curr() outside of rq::lock, we can race + * against the actual state. This means the result can be wrong. + * + * If we get a false positive, we retry, this is harmless. + * + * If we get a false negative, things are complicated. If we are after + * perf_event_context_sched_in() ctx::lock will serialize us, and the + * value must be correct. If we're before, it doesn't matter since + * perf_event_context_sched_in() will program the counter. + * + * However, this hinges on the remote context switch having observed + * our task->perf_event_ctxp[] store, such that it will in fact take + * ctx::lock in perf_event_context_sched_in(). + * + * We do this by task_function_call(), if the IPI fails to hit the task + * we know any future context switch of task must see the + * perf_event_ctpx[] store. */ -again: + /* - * Cannot use task_function_call() because we need to run on the task's - * CPU regardless of whether its current or not. + * This smp_mb() orders the task->perf_event_ctxp[] store with the + * task_cpu() load, such that if the IPI then does not find the task + * running, a future context switch of that task must observe the + * store. */ - if (!cpu_function_call(task_cpu(task), __perf_install_in_context, event)) + smp_mb(); +again: + if (!task_function_call(task, __perf_install_in_context, event)) return; raw_spin_lock_irq(&ctx->lock); @@ -2348,12 +2370,16 @@ again: raw_spin_unlock_irq(&ctx->lock); return; } - raw_spin_unlock_irq(&ctx->lock); /* - * Since !ctx->is_active doesn't mean anything, we must IPI - * unconditionally. + * If the task is not running, ctx->lock will avoid it becoming so, + * thus we can safely install the event. */ - goto again; + if (task_curr(task)) { + raw_spin_unlock_irq(&ctx->lock); + goto again; + } + add_event_to_ctx(event, ctx); + raw_spin_unlock_irq(&ctx->lock); } /* From 321027c1fe77f892f4ea07846aeae08cefbbb290 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 11 Jan 2017 21:09:50 +0100 Subject: [PATCH 459/645] perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race Di Shen reported a race between two concurrent sys_perf_event_open() calls where both try and move the same pre-existing software group into a hardware context. The problem is exactly that described in commit: f63a8daa5812 ("perf: Fix event->ctx locking") ... where, while we wait for a ctx->mutex acquisition, the event->ctx relation can have changed under us. That very same commit failed to recognise sys_perf_event_context() as an external access vector to the events and thereby didn't apply the established locking rules correctly. So while one sys_perf_event_open() call is stuck waiting on mutex_lock_double(), the other (which owns said locks) moves the group about. So by the time the former sys_perf_event_open() acquires the locks, the context we've acquired is stale (and possibly dead). Apply the established locking rules as per perf_event_ctx_lock_nested() to the mutex_lock_double() for the 'move_group' case. This obviously means we need to validate state after we acquire the locks. Reported-by: Di Shen (Keen Lab) Tested-by: John Dias Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Kees Cook Cc: Linus Torvalds Cc: Min Chong Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Fixes: f63a8daa5812 ("perf: Fix event->ctx locking") Link: http://lkml.kernel.org/r/20170106131444.GZ3174@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar --- kernel/events/core.c | 58 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 4 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 72ce7d63e561..cbc5937265da 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -9529,6 +9529,37 @@ static int perf_event_set_clock(struct perf_event *event, clockid_t clk_id) return 0; } +/* + * Variation on perf_event_ctx_lock_nested(), except we take two context + * mutexes. + */ +static struct perf_event_context * +__perf_event_ctx_lock_double(struct perf_event *group_leader, + struct perf_event_context *ctx) +{ + struct perf_event_context *gctx; + +again: + rcu_read_lock(); + gctx = READ_ONCE(group_leader->ctx); + if (!atomic_inc_not_zero(&gctx->refcount)) { + rcu_read_unlock(); + goto again; + } + rcu_read_unlock(); + + mutex_lock_double(&gctx->mutex, &ctx->mutex); + + if (group_leader->ctx != gctx) { + mutex_unlock(&ctx->mutex); + mutex_unlock(&gctx->mutex); + put_ctx(gctx); + goto again; + } + + return gctx; +} + /** * sys_perf_event_open - open a performance event, associate it to a task/cpu * @@ -9772,12 +9803,31 @@ SYSCALL_DEFINE5(perf_event_open, } if (move_group) { - gctx = group_leader->ctx; - mutex_lock_double(&gctx->mutex, &ctx->mutex); + gctx = __perf_event_ctx_lock_double(group_leader, ctx); + if (gctx->task == TASK_TOMBSTONE) { err = -ESRCH; goto err_locked; } + + /* + * Check if we raced against another sys_perf_event_open() call + * moving the software group underneath us. + */ + if (!(group_leader->group_caps & PERF_EV_CAP_SOFTWARE)) { + /* + * If someone moved the group out from under us, check + * if this new event wound up on the same ctx, if so + * its the regular !move_group case, otherwise fail. + */ + if (gctx != ctx) { + err = -EINVAL; + goto err_locked; + } else { + perf_event_ctx_unlock(group_leader, gctx); + move_group = 0; + } + } } else { mutex_lock(&ctx->mutex); } @@ -9879,7 +9929,7 @@ SYSCALL_DEFINE5(perf_event_open, perf_unpin_context(ctx); if (move_group) - mutex_unlock(&gctx->mutex); + perf_event_ctx_unlock(group_leader, gctx); mutex_unlock(&ctx->mutex); if (task) { @@ -9905,7 +9955,7 @@ SYSCALL_DEFINE5(perf_event_open, err_locked: if (move_group) - mutex_unlock(&gctx->mutex); + perf_event_ctx_unlock(group_leader, gctx); mutex_unlock(&ctx->mutex); /* err_file: */ fput(event_file); From 475113d937adfd150eb82b5e2c5507125a68e7af Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 28 Dec 2016 14:31:03 +0100 Subject: [PATCH 460/645] perf/x86/intel: Account interrupts for PEBS errors It's possible to set up PEBS events to get only errors and not any data, like on SNB-X (model 45) and IVB-EP (model 62) via 2 perf commands running simultaneously: taskset -c 1 ./perf record -c 4 -e branches:pp -j any -C 10 This leads to a soft lock up, because the error path of the intel_pmu_drain_pebs_nhm() does not account event->hw.interrupt for error PEBS interrupts, so in case you're getting ONLY errors you don't have a way to stop the event when it's over the max_samples_per_tick limit: NMI watchdog: BUG: soft lockup - CPU#22 stuck for 22s! [perf_fuzzer:5816] ... RIP: 0010:[] [] smp_call_function_single+0xe2/0x140 ... Call Trace: ? trace_hardirqs_on_caller+0xf5/0x1b0 ? perf_cgroup_attach+0x70/0x70 perf_install_in_context+0x199/0x1b0 ? ctx_resched+0x90/0x90 SYSC_perf_event_open+0x641/0xf90 SyS_perf_event_open+0x9/0x10 do_syscall_64+0x6c/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 Add perf_event_account_interrupt() which does the interrupt and frequency checks and call it from intel_pmu_drain_pebs_nhm()'s error path. We keep the pending_kill and pending_wakeup logic only in the __perf_event_overflow() path, because they make sense only if there's any data to deliver. Signed-off-by: Jiri Olsa Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: Vince Weaver Link: http://lkml.kernel.org/r/1482931866-6018-2-git-send-email-jolsa@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/events/intel/ds.c | 6 ++++- include/linux/perf_event.h | 1 + kernel/events/core.c | 47 +++++++++++++++++++++++++------------- 3 files changed, 37 insertions(+), 17 deletions(-) diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index be202390bbd3..9dfeeeca0ea8 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -1389,9 +1389,13 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs) continue; /* log dropped samples number */ - if (error[bit]) + if (error[bit]) { perf_log_lost_samples(event, error[bit]); + if (perf_event_account_interrupt(event)) + x86_pmu_stop(event, 0); + } + if (counts[bit]) { __intel_pmu_pebs_event(event, iregs, base, top, bit, counts[bit]); diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 4741ecdb9817..78ed8105e64d 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1259,6 +1259,7 @@ extern void perf_event_disable(struct perf_event *event); extern void perf_event_disable_local(struct perf_event *event); extern void perf_event_disable_inatomic(struct perf_event *event); extern void perf_event_task_tick(void); +extern int perf_event_account_interrupt(struct perf_event *event); #else /* !CONFIG_PERF_EVENTS: */ static inline void * perf_aux_output_begin(struct perf_output_handle *handle, diff --git a/kernel/events/core.c b/kernel/events/core.c index cbc5937265da..110b38a58493 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -7060,25 +7060,12 @@ static void perf_log_itrace_start(struct perf_event *event) perf_output_end(&handle); } -/* - * Generic event overflow handling, sampling. - */ - -static int __perf_event_overflow(struct perf_event *event, - int throttle, struct perf_sample_data *data, - struct pt_regs *regs) +static int +__perf_event_account_interrupt(struct perf_event *event, int throttle) { - int events = atomic_read(&event->event_limit); struct hw_perf_event *hwc = &event->hw; - u64 seq; int ret = 0; - - /* - * Non-sampling counters might still use the PMI to fold short - * hardware counters, ignore those. - */ - if (unlikely(!is_sampling_event(event))) - return 0; + u64 seq; seq = __this_cpu_read(perf_throttled_seq); if (seq != hwc->interrupts_seq) { @@ -7106,6 +7093,34 @@ static int __perf_event_overflow(struct perf_event *event, perf_adjust_period(event, delta, hwc->last_period, true); } + return ret; +} + +int perf_event_account_interrupt(struct perf_event *event) +{ + return __perf_event_account_interrupt(event, 1); +} + +/* + * Generic event overflow handling, sampling. + */ + +static int __perf_event_overflow(struct perf_event *event, + int throttle, struct perf_sample_data *data, + struct pt_regs *regs) +{ + int events = atomic_read(&event->event_limit); + int ret = 0; + + /* + * Non-sampling counters might still use the PMI to fold short + * hardware counters, ignore those. + */ + if (unlikely(!is_sampling_event(event))) + return 0; + + ret = __perf_event_account_interrupt(event, throttle); + /* * XXX event_limit might not quite work as expected on inherited * events From 18e7a45af91acdde99d3aa1372cc40e1f8142f7b Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 3 Jan 2017 15:24:54 +0100 Subject: [PATCH 461/645] perf/x86: Reject non sampling events with precise_ip As Peter suggested [1] rejecting non sampling PEBS events, because they dont make any sense and could cause bugs in the NMI handler [2]. [1] http://lkml.kernel.org/r/20170103094059.GC3093@worktop [2] http://lkml.kernel.org/r/1482931866-6018-3-git-send-email-jolsa@kernel.org Signed-off-by: Jiri Olsa Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: Vince Weaver Link: http://lkml.kernel.org/r/20170103142454.GA26251@krava Signed-off-by: Ingo Molnar --- arch/x86/events/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 019c5887b698..1635c0c8df23 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -505,6 +505,10 @@ int x86_pmu_hw_config(struct perf_event *event) if (event->attr.precise_ip > precise) return -EOPNOTSUPP; + + /* There's no sense in having PEBS for non sampling events: */ + if (!is_sampling_event(event)) + return -EINVAL; } /* * check that PEBS LBR correction does not conflict with From c7334ce814f7e5d8fc1f9b3126cda0640c2f81b3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 14 Jan 2017 14:09:03 +0100 Subject: [PATCH 462/645] Revert "driver core: Add deferred_probe attribute to devices in sysfs" This reverts commit 6751667a29d6fd64afb9ce30567ad616b68ed789. Rob Herring objected to it, and a replacement for it will be added using debugfs in the future. Cc: Ben Hutchings Reported-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-devices-deferred_probe | 12 ------------ drivers/base/base.h | 2 -- drivers/base/core.c | 7 ------- drivers/base/dd.c | 13 ------------- 4 files changed, 34 deletions(-) delete mode 100644 Documentation/ABI/testing/sysfs-devices-deferred_probe diff --git a/Documentation/ABI/testing/sysfs-devices-deferred_probe b/Documentation/ABI/testing/sysfs-devices-deferred_probe deleted file mode 100644 index 58553d7a321f..000000000000 --- a/Documentation/ABI/testing/sysfs-devices-deferred_probe +++ /dev/null @@ -1,12 +0,0 @@ -What: /sys/devices/.../deferred_probe -Date: August 2016 -Contact: Ben Hutchings -Description: - The /sys/devices/.../deferred_probe attribute is - present for all devices. If a driver detects during - probing a device that a related device is not yet - ready, it may defer probing of the first device. The - kernel will retry probing the first device after any - other device is successfully probed. This attribute - reads as 1 if probing of this device is currently - deferred, or 0 otherwise. diff --git a/drivers/base/base.h b/drivers/base/base.h index ada9dce34e6d..e19b1008e5fb 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -141,8 +141,6 @@ extern void device_unblock_probing(void); extern struct kset *devices_kset; extern void devices_kset_move_last(struct device *dev); -extern struct device_attribute dev_attr_deferred_probe; - #if defined(CONFIG_MODULES) && defined(CONFIG_SYSFS) extern void module_add_driver(struct module *mod, struct device_driver *drv); extern void module_remove_driver(struct device_driver *drv); diff --git a/drivers/base/core.c b/drivers/base/core.c index 020ea7f05520..8c25e68e67d7 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1060,14 +1060,8 @@ static int device_add_attrs(struct device *dev) goto err_remove_dev_groups; } - error = device_create_file(dev, &dev_attr_deferred_probe); - if (error) - goto err_remove_online; - return 0; - err_remove_online: - device_remove_file(dev, &dev_attr_online); err_remove_dev_groups: device_remove_groups(dev, dev->groups); err_remove_type_groups: @@ -1085,7 +1079,6 @@ static void device_remove_attrs(struct device *dev) struct class *class = dev->class; const struct device_type *type = dev->type; - device_remove_file(dev, &dev_attr_deferred_probe); device_remove_file(dev, &dev_attr_online); device_remove_groups(dev, dev->groups); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index a8b258e5407b..a1fbf55c4d3a 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -53,19 +53,6 @@ static LIST_HEAD(deferred_probe_pending_list); static LIST_HEAD(deferred_probe_active_list); static atomic_t deferred_trigger_count = ATOMIC_INIT(0); -static ssize_t deferred_probe_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - bool value; - - mutex_lock(&deferred_probe_mutex); - value = !list_empty(&dev->p->deferred_probe); - mutex_unlock(&deferred_probe_mutex); - - return sprintf(buf, "%d\n", value); -} -DEVICE_ATTR_RO(deferred_probe); - /* * In some cases, like suspend to RAM or hibernation, It might be reasonable * to prohibit probing of devices as it could be unsafe. From 0100a3e67a9cef64d72cd3a1da86f3ddbee50363 Mon Sep 17 00:00:00 2001 From: Peter Jones Date: Mon, 12 Dec 2016 18:42:28 -0500 Subject: [PATCH 463/645] efi/x86: Prune invalid memory map entries and fix boot regression Some machines, such as the Lenovo ThinkPad W541 with firmware GNET80WW (2.28), include memory map entries with phys_addr=0x0 and num_pages=0. These machines fail to boot after the following commit, commit 8e80632fb23f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") Fix this by removing such bogus entries from the memory map. Furthermore, currently the log output for this case (with efi=debug) looks like: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0xffffffffffffffff] (0MB) This is clearly wrong, and also not as informative as it could be. This patch changes it so that if we find obviously invalid memory map entries, we print an error and skip those entries. It also detects the display of the address range calculation overflow, so the new output is: [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) It also detects memory map sizes that would overflow the physical address, for example phys_addr=0xfffffffffffff000 and num_pages=0x0200000000000001, and prints: [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[phys_addr=0xfffffffffffff000-0x20ffffffffffffffff] (invalid) It then removes these entries from the memory map. Signed-off-by: Peter Jones Signed-off-by: Ard Biesheuvel [ardb: refactor for clarity with no functional changes, avoid PAGE_SHIFT] Signed-off-by: Matt Fleming [Matt: Include bugzilla info in commit log] Cc: # v4.9+ Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://bugzilla.kernel.org/show_bug.cgi?id=191121 Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi.c | 66 +++++++++++++++++++++++++++++++++++++ include/linux/efi.h | 1 + 2 files changed, 67 insertions(+) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 936a488d6cf6..274dfc481849 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -210,6 +210,70 @@ int __init efi_memblock_x86_reserve_range(void) return 0; } +#define OVERFLOW_ADDR_SHIFT (64 - EFI_PAGE_SHIFT) +#define OVERFLOW_ADDR_MASK (U64_MAX << OVERFLOW_ADDR_SHIFT) +#define U64_HIGH_BIT (~(U64_MAX >> 1)) + +static bool __init efi_memmap_entry_valid(const efi_memory_desc_t *md, int i) +{ + u64 end = (md->num_pages << EFI_PAGE_SHIFT) + md->phys_addr - 1; + u64 end_hi = 0; + char buf[64]; + + if (md->num_pages == 0) { + end = 0; + } else if (md->num_pages > EFI_PAGES_MAX || + EFI_PAGES_MAX - md->num_pages < + (md->phys_addr >> EFI_PAGE_SHIFT)) { + end_hi = (md->num_pages & OVERFLOW_ADDR_MASK) + >> OVERFLOW_ADDR_SHIFT; + + if ((md->phys_addr & U64_HIGH_BIT) && !(end & U64_HIGH_BIT)) + end_hi += 1; + } else { + return true; + } + + pr_warn_once(FW_BUG "Invalid EFI memory map entries:\n"); + + if (end_hi) { + pr_warn("mem%02u: %s range=[0x%016llx-0x%llx%016llx] (invalid)\n", + i, efi_md_typeattr_format(buf, sizeof(buf), md), + md->phys_addr, end_hi, end); + } else { + pr_warn("mem%02u: %s range=[0x%016llx-0x%016llx] (invalid)\n", + i, efi_md_typeattr_format(buf, sizeof(buf), md), + md->phys_addr, end); + } + return false; +} + +static void __init efi_clean_memmap(void) +{ + efi_memory_desc_t *out = efi.memmap.map; + const efi_memory_desc_t *in = out; + const efi_memory_desc_t *end = efi.memmap.map_end; + int i, n_removal; + + for (i = n_removal = 0; in < end; i++) { + if (efi_memmap_entry_valid(in, i)) { + if (out != in) + memcpy(out, in, efi.memmap.desc_size); + out = (void *)out + efi.memmap.desc_size; + } else { + n_removal++; + } + in = (void *)in + efi.memmap.desc_size; + } + + if (n_removal > 0) { + u64 size = efi.memmap.nr_map - n_removal; + + pr_warn("Removing %d invalid memory map entries.\n", n_removal); + efi_memmap_install(efi.memmap.phys_map, size); + } +} + void __init efi_print_memmap(void) { efi_memory_desc_t *md; @@ -472,6 +536,8 @@ void __init efi_init(void) } } + efi_clean_memmap(); + if (efi_enabled(EFI_DBG)) efi_print_memmap(); } diff --git a/include/linux/efi.h b/include/linux/efi.h index 0c5420208c40..5b1af30ece55 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -103,6 +103,7 @@ typedef struct { #define EFI_PAGE_SHIFT 12 #define EFI_PAGE_SIZE (1UL << EFI_PAGE_SHIFT) +#define EFI_PAGES_MAX (U64_MAX >> EFI_PAGE_SHIFT) typedef struct { u32 type; From a12f1ae61c489076a9aeb90bddca7722bf330df3 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 13 Dec 2016 12:09:56 -0800 Subject: [PATCH 464/645] aio: fix lock dep warning lockdep reports a warnning. file_start_write/file_end_write only acquire/release the lock for regular files. So checking the files in aio side too. [ 453.532141] ------------[ cut here ]------------ [ 453.533011] WARNING: CPU: 1 PID: 1298 at ../kernel/locking/lockdep.c:3514 lock_release+0x434/0x670 [ 453.533011] DEBUG_LOCKS_WARN_ON(depth <= 0) [ 453.533011] Modules linked in: [ 453.533011] CPU: 1 PID: 1298 Comm: fio Not tainted 4.9.0+ #964 [ 453.533011] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014 [ 453.533011] ffff8803a24b7a70 ffffffff8196cffb ffff8803a24b7ae8 0000000000000000 [ 453.533011] ffff8803a24b7ab8 ffffffff81091ee1 ffff8803a5dba700 00000dba00000008 [ 453.533011] ffffed0074496f59 ffff8803a5dbaf54 ffff8803ae0f8488 fffffffffffffdef [ 453.533011] Call Trace: [ 453.533011] [] dump_stack+0x67/0x9c [ 453.533011] [] __warn+0x111/0x130 [ 453.533011] [] warn_slowpath_fmt+0x97/0xb0 [ 453.533011] [] ? __warn+0x130/0x130 [ 453.533011] [] ? blk_finish_plug+0x29/0x60 [ 453.533011] [] lock_release+0x434/0x670 [ 453.533011] [] ? import_single_range+0xd4/0x110 [ 453.533011] [] ? rw_verify_area+0x65/0x140 [ 453.533011] [] ? aio_write+0x1f6/0x280 [ 453.533011] [] aio_write+0x229/0x280 [ 453.533011] [] ? aio_complete+0x640/0x640 [ 453.533011] [] ? debug_check_no_locks_freed+0x1a0/0x1a0 [ 453.533011] [] ? debug_lockdep_rcu_enabled.part.2+0x1a/0x30 [ 453.533011] [] ? debug_lockdep_rcu_enabled+0x35/0x40 [ 453.533011] [] ? __might_fault+0x7e/0xf0 [ 453.533011] [] do_io_submit+0x94c/0xb10 [ 453.533011] [] ? do_io_submit+0x23e/0xb10 [ 453.533011] [] ? SyS_io_destroy+0x270/0x270 [ 453.533011] [] ? mark_held_locks+0x23/0xc0 [ 453.533011] [] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 453.533011] [] SyS_io_submit+0x10/0x20 [ 453.533011] [] entry_SYSCALL_64_fastpath+0x18/0xad [ 453.533011] [] ? trace_hardirqs_off_caller+0xc0/0x110 [ 453.533011] ---[ end trace b2fbe664d1cc0082 ]--- Cc: Dmitry Monakhov Cc: Jan Kara Cc: Christoph Hellwig Cc: Al Viro Reviewed-by: Christoph Hellwig Signed-off-by: Shaohua Li Signed-off-by: Al Viro --- fs/aio.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index 4ab67e8cb776..873b4ca82ccb 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1085,7 +1085,8 @@ static void aio_complete(struct kiocb *kiocb, long res, long res2) * Tell lockdep we inherited freeze protection from submission * thread. */ - __sb_writers_acquired(file_inode(file)->i_sb, SB_FREEZE_WRITE); + if (S_ISREG(file_inode(file)->i_mode)) + __sb_writers_acquired(file_inode(file)->i_sb, SB_FREEZE_WRITE); file_end_write(file); } @@ -1525,7 +1526,8 @@ static ssize_t aio_write(struct kiocb *req, struct iocb *iocb, bool vectored, * by telling it the lock got released so that it doesn't * complain about held lock when we return to userspace. */ - __sb_writers_release(file_inode(file)->i_sb, SB_FREEZE_WRITE); + if (S_ISREG(file_inode(file)->i_mode)) + __sb_writers_release(file_inode(file)->i_sb, SB_FREEZE_WRITE); } kfree(iovec); return ret; From 4d22c75d4c7b5c5f4bd31054f09103ee490878fd Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Wed, 11 Jan 2017 13:25:00 -0600 Subject: [PATCH 465/645] coredump: Ensure proper size of sparse core files If the last section of a core file ends with an unmapped or zero page, the size of the file does not correspond with the last dump_skip() call. gdb complains that the file is truncated and can be confusing to users. After all of the vma sections are written, make sure that the file size is no smaller than the current file position. This problem can be demonstrated with gdb's bigcore testcase on the sparc architecture. Signed-off-by: Dave Kleikamp Cc: Alexander Viro Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Al Viro --- fs/binfmt_elf.c | 1 + fs/coredump.c | 18 ++++++++++++++++++ include/linux/coredump.h | 1 + 3 files changed, 20 insertions(+) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 29a02daf08a9..422370293cfd 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -2298,6 +2298,7 @@ static int elf_core_dump(struct coredump_params *cprm) goto end_coredump; } } + dump_truncate(cprm); if (!elf_core_write_extra_data(cprm)) goto end_coredump; diff --git a/fs/coredump.c b/fs/coredump.c index e525b6017cdf..ae6b05629ca1 100644 --- a/fs/coredump.c +++ b/fs/coredump.c @@ -833,3 +833,21 @@ int dump_align(struct coredump_params *cprm, int align) return mod ? dump_skip(cprm, align - mod) : 1; } EXPORT_SYMBOL(dump_align); + +/* + * Ensures that file size is big enough to contain the current file + * postion. This prevents gdb from complaining about a truncated file + * if the last "write" to the file was dump_skip. + */ +void dump_truncate(struct coredump_params *cprm) +{ + struct file *file = cprm->file; + loff_t offset; + + if (file->f_op->llseek && file->f_op->llseek != no_llseek) { + offset = file->f_op->llseek(file, 0, SEEK_CUR); + if (i_size_read(file->f_mapping->host) < offset) + do_truncate(file->f_path.dentry, offset, 0, file); + } +} +EXPORT_SYMBOL(dump_truncate); diff --git a/include/linux/coredump.h b/include/linux/coredump.h index d016a121a8c4..28ffa94aed6b 100644 --- a/include/linux/coredump.h +++ b/include/linux/coredump.h @@ -14,6 +14,7 @@ struct coredump_params; extern int dump_skip(struct coredump_params *cprm, size_t nr); extern int dump_emit(struct coredump_params *cprm, const void *addr, int nr); extern int dump_align(struct coredump_params *cprm, int align); +extern void dump_truncate(struct coredump_params *cprm); #ifdef CONFIG_COREDUMP extern void do_coredump(const siginfo_t *siginfo); #else From b9dc6f65bc5e232d1c05fe34b5daadc7e8bbf1fb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 14 Jan 2017 19:33:08 -0500 Subject: [PATCH 466/645] fix a fencepost error in pipe_advance() The logics in pipe_advance() used to release all buffers past the new position failed in cases when the number of buffers to release was equal to pipe->buffers. If that happened, none of them had been released, leaving pipe full. Worse, it was trivial to trigger and we end up with pipe full of uninitialized pages. IOW, it's an infoleak. Cc: stable@vger.kernel.org # v4.9 Reported-by: "Alan J. Wylie" Tested-by: "Alan J. Wylie" Signed-off-by: Al Viro --- lib/iov_iter.c | 66 ++++++++++++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 29 deletions(-) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index 25f572303801..e68604ae3ced 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -730,43 +730,50 @@ size_t iov_iter_copy_from_user_atomic(struct page *page, } EXPORT_SYMBOL(iov_iter_copy_from_user_atomic); -static void pipe_advance(struct iov_iter *i, size_t size) +static inline void pipe_truncate(struct iov_iter *i) { struct pipe_inode_info *pipe = i->pipe; - struct pipe_buffer *buf; - int idx = i->idx; - size_t off = i->iov_offset, orig_sz; - - if (unlikely(i->count < size)) - size = i->count; - orig_sz = size; - - if (size) { - if (off) /* make it relative to the beginning of buffer */ - size += off - pipe->bufs[idx].offset; - while (1) { - buf = &pipe->bufs[idx]; - if (size <= buf->len) - break; - size -= buf->len; - idx = next_idx(idx, pipe); - } - buf->len = size; - i->idx = idx; - off = i->iov_offset = buf->offset + size; - } - if (off) - idx = next_idx(idx, pipe); if (pipe->nrbufs) { - int unused = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1); - /* [curbuf,unused) is in use. Free [idx,unused) */ - while (idx != unused) { + size_t off = i->iov_offset; + int idx = i->idx; + int nrbufs = (idx - pipe->curbuf) & (pipe->buffers - 1); + if (off) { + pipe->bufs[idx].len = off - pipe->bufs[idx].offset; + idx = next_idx(idx, pipe); + nrbufs++; + } + while (pipe->nrbufs > nrbufs) { pipe_buf_release(pipe, &pipe->bufs[idx]); idx = next_idx(idx, pipe); pipe->nrbufs--; } } - i->count -= orig_sz; +} + +static void pipe_advance(struct iov_iter *i, size_t size) +{ + struct pipe_inode_info *pipe = i->pipe; + if (unlikely(i->count < size)) + size = i->count; + if (size) { + struct pipe_buffer *buf; + size_t off = i->iov_offset, left = size; + int idx = i->idx; + if (off) /* make it relative to the beginning of buffer */ + left += off - pipe->bufs[idx].offset; + while (1) { + buf = &pipe->bufs[idx]; + if (left <= buf->len) + break; + left -= buf->len; + idx = next_idx(idx, pipe); + } + i->idx = idx; + i->iov_offset = buf->offset + left; + } + i->count -= size; + /* ... and discard everything past that point */ + pipe_truncate(i); } void iov_iter_advance(struct iov_iter *i, size_t size) @@ -826,6 +833,7 @@ void iov_iter_pipe(struct iov_iter *i, int direction, size_t count) { BUG_ON(direction != ITER_PIPE); + WARN_ON(pipe->nrbufs == pipe->buffers); i->type = direction; i->pipe = pipe; i->idx = (pipe->curbuf + pipe->nrbufs) & (pipe->buffers - 1); From f466ae66fa6a599f9a53b5f9bafea4b8cfffa7fb Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 9 Jan 2017 23:23:15 -0800 Subject: [PATCH 467/645] rcu: Remove cond_resched() from Tiny synchronize_sched() It is now legal to invoke synchronize_sched() at early boot, which causes Tiny RCU's synchronize_sched() to emit spurious splats. This commit therefore removes the cond_resched() from Tiny RCU's synchronize_sched(). Fixes: 8b355e3bc140 ("rcu: Drive expedited grace periods from workqueue") Signed-off-by: Paul E. McKenney Cc: # 4.9.0- --- kernel/rcu/tiny.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c index 1898559e6b60..b23a4d076f3d 100644 --- a/kernel/rcu/tiny.c +++ b/kernel/rcu/tiny.c @@ -185,9 +185,6 @@ static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused * benefits of doing might_sleep() to reduce latency.) * * Cool, huh? (Due to Josh Triplett.) - * - * But we want to make this a static inline later. The cond_resched() - * currently makes this problematic. */ void synchronize_sched(void) { @@ -195,7 +192,6 @@ void synchronize_sched(void) lock_is_held(&rcu_lock_map) || lock_is_held(&rcu_sched_lock_map), "Illegal synchronize_sched() in RCU read-side critical section"); - cond_resched(); } EXPORT_SYMBOL_GPL(synchronize_sched); From 52d7e48b86fc108e45a656d8e53e4237993c481d Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 10 Jan 2017 02:28:26 -0800 Subject: [PATCH 468/645] rcu: Narrow early boot window of illegal synchronous grace periods The current preemptible RCU implementation goes through three phases during bootup. In the first phase, there is only one CPU that is running with preemption disabled, so that a no-op is a synchronous grace period. In the second mid-boot phase, the scheduler is running, but RCU has not yet gotten its kthreads spawned (and, for expedited grace periods, workqueues are not yet running. During this time, any attempt to do a synchronous grace period will hang the system (or complain bitterly, depending). In the third and final phase, RCU is fully operational and everything works normally. This has been OK for some time, but there has recently been some synchronous grace periods showing up during the second mid-boot phase. This code worked "by accident" for awhile, but started failing as soon as expedited RCU grace periods switched over to workqueues in commit 8b355e3bc140 ("rcu: Drive expedited grace periods from workqueue"). Note that the code was buggy even before this commit, as it was subject to failure on real-time systems that forced all expedited grace periods to run as normal grace periods (for example, using the rcu_normal ksysfs parameter). The callchain from the failure case is as follows: early_amd_iommu_init() |-> acpi_put_table(ivrs_base); |-> acpi_tb_put_table(table_desc); |-> acpi_tb_invalidate_table(table_desc); |-> acpi_tb_release_table(...) |-> acpi_os_unmap_memory |-> acpi_os_unmap_iomem |-> acpi_os_map_cleanup |-> synchronize_rcu_expedited The kernel showing this callchain was built with CONFIG_PREEMPT_RCU=y, which caused the code to try using workqueues before they were initialized, which did not go well. This commit therefore reworks RCU to permit synchronous grace periods to proceed during this mid-boot phase. This commit is therefore a fix to a regression introduced in v4.9, and is therefore being put forward post-merge-window in v4.10. This commit sets a flag from the existing rcu_scheduler_starting() function which causes all synchronous grace periods to take the expedited path. The expedited path now checks this flag, using the requesting task to drive the expedited grace period forward during the mid-boot phase. Finally, this flag is updated by a core_initcall() function named rcu_exp_runtime_mode(), which causes the runtime codepaths to be used. Note that this arrangement assumes that tasks are not sent POSIX signals (or anything similar) from the time that the first task is spawned through core_initcall() time. Fixes: 8b355e3bc140 ("rcu: Drive expedited grace periods from workqueue") Reported-by: "Zheng, Lv" Reported-by: Borislav Petkov Signed-off-by: Paul E. McKenney Tested-by: Stan Kain Tested-by: Ivan Tested-by: Emanuel Castelo Tested-by: Bruno Pesavento Tested-by: Borislav Petkov Tested-by: Frederic Bezies Cc: # 4.9.0- --- include/linux/rcupdate.h | 4 ++++ kernel/rcu/rcu.h | 1 + kernel/rcu/tiny_plugin.h | 9 +++++-- kernel/rcu/tree.c | 33 +++++++++++++++---------- kernel/rcu/tree_exp.h | 52 +++++++++++++++++++++++++++++++--------- kernel/rcu/tree_plugin.h | 2 +- kernel/rcu/update.c | 38 ++++++++++++++++++++++------- 7 files changed, 104 insertions(+), 35 deletions(-) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 321f9ed552a9..01f71e1d2e94 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -444,6 +444,10 @@ bool __rcu_is_watching(void); #error "Unknown RCU implementation specified to kernel configuration" #endif +#define RCU_SCHEDULER_INACTIVE 0 +#define RCU_SCHEDULER_INIT 1 +#define RCU_SCHEDULER_RUNNING 2 + /* * init_rcu_head_on_stack()/destroy_rcu_head_on_stack() are needed for dynamic * initialization and destruction of rcu_head on the stack. rcu_head structures diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h index 80adef7d4c3d..0d6ff3e471be 100644 --- a/kernel/rcu/rcu.h +++ b/kernel/rcu/rcu.h @@ -136,6 +136,7 @@ int rcu_jiffies_till_stall_check(void); #define TPS(x) tracepoint_string(x) void rcu_early_boot_tests(void); +void rcu_test_sync_prims(void); /* * This function really isn't for public consumption, but RCU is special in diff --git a/kernel/rcu/tiny_plugin.h b/kernel/rcu/tiny_plugin.h index 196f0302e2f4..c64b827ecbca 100644 --- a/kernel/rcu/tiny_plugin.h +++ b/kernel/rcu/tiny_plugin.h @@ -60,12 +60,17 @@ EXPORT_SYMBOL_GPL(rcu_scheduler_active); /* * During boot, we forgive RCU lockdep issues. After this function is - * invoked, we start taking RCU lockdep issues seriously. + * invoked, we start taking RCU lockdep issues seriously. Note that unlike + * Tree RCU, Tiny RCU transitions directly from RCU_SCHEDULER_INACTIVE + * to RCU_SCHEDULER_RUNNING, skipping the RCU_SCHEDULER_INIT stage. + * The reason for this is that Tiny RCU does not need kthreads, so does + * not have to care about the fact that the scheduler is half-initialized + * at a certain phase of the boot process. */ void __init rcu_scheduler_starting(void) { WARN_ON(nr_context_switches() > 0); - rcu_scheduler_active = 1; + rcu_scheduler_active = RCU_SCHEDULER_RUNNING; } #endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index 96c52e43f7ca..cb4e2056ccf3 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -127,13 +127,16 @@ int rcu_num_nodes __read_mostly = NUM_RCU_NODES; /* Total # rcu_nodes in use. */ int sysctl_panic_on_rcu_stall __read_mostly; /* - * The rcu_scheduler_active variable transitions from zero to one just - * before the first task is spawned. So when this variable is zero, RCU - * can assume that there is but one task, allowing RCU to (for example) + * The rcu_scheduler_active variable is initialized to the value + * RCU_SCHEDULER_INACTIVE and transitions RCU_SCHEDULER_INIT just before the + * first task is spawned. So when this variable is RCU_SCHEDULER_INACTIVE, + * RCU can assume that there is but one task, allowing RCU to (for example) * optimize synchronize_rcu() to a simple barrier(). When this variable - * is one, RCU must actually do all the hard work required to detect real - * grace periods. This variable is also used to suppress boot-time false - * positives from lockdep-RCU error checking. + * is RCU_SCHEDULER_INIT, RCU must actually do all the hard work required + * to detect real grace periods. This variable is also used to suppress + * boot-time false positives from lockdep-RCU error checking. Finally, it + * transitions from RCU_SCHEDULER_INIT to RCU_SCHEDULER_RUNNING after RCU + * is fully initialized, including all of its kthreads having been spawned. */ int rcu_scheduler_active __read_mostly; EXPORT_SYMBOL_GPL(rcu_scheduler_active); @@ -3980,18 +3983,22 @@ static int __init rcu_spawn_gp_kthread(void) early_initcall(rcu_spawn_gp_kthread); /* - * This function is invoked towards the end of the scheduler's initialization - * process. Before this is called, the idle task might contain - * RCU read-side critical sections (during which time, this idle - * task is booting the system). After this function is called, the - * idle tasks are prohibited from containing RCU read-side critical - * sections. This function also enables RCU lockdep checking. + * This function is invoked towards the end of the scheduler's + * initialization process. Before this is called, the idle task might + * contain synchronous grace-period primitives (during which time, this idle + * task is booting the system, and such primitives are no-ops). After this + * function is called, any synchronous grace-period primitives are run as + * expedited, with the requesting task driving the grace period forward. + * A later core_initcall() rcu_exp_runtime_mode() will switch to full + * runtime RCU functionality. */ void rcu_scheduler_starting(void) { WARN_ON(num_online_cpus() != 1); WARN_ON(nr_context_switches() > 0); - rcu_scheduler_active = 1; + rcu_test_sync_prims(); + rcu_scheduler_active = RCU_SCHEDULER_INIT; + rcu_test_sync_prims(); } /* diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h index d3053e99fdb6..e59e1849b89a 100644 --- a/kernel/rcu/tree_exp.h +++ b/kernel/rcu/tree_exp.h @@ -531,6 +531,20 @@ struct rcu_exp_work { struct work_struct rew_work; }; +/* + * Common code to drive an expedited grace period forward, used by + * workqueues and mid-boot-time tasks. + */ +static void rcu_exp_sel_wait_wake(struct rcu_state *rsp, + smp_call_func_t func, unsigned long s) +{ + /* Initialize the rcu_node tree in preparation for the wait. */ + sync_rcu_exp_select_cpus(rsp, func); + + /* Wait and clean up, including waking everyone. */ + rcu_exp_wait_wake(rsp, s); +} + /* * Work-queue handler to drive an expedited grace period forward. */ @@ -538,12 +552,8 @@ static void wait_rcu_exp_gp(struct work_struct *wp) { struct rcu_exp_work *rewp; - /* Initialize the rcu_node tree in preparation for the wait. */ rewp = container_of(wp, struct rcu_exp_work, rew_work); - sync_rcu_exp_select_cpus(rewp->rew_rsp, rewp->rew_func); - - /* Wait and clean up, including waking everyone. */ - rcu_exp_wait_wake(rewp->rew_rsp, rewp->rew_s); + rcu_exp_sel_wait_wake(rewp->rew_rsp, rewp->rew_func, rewp->rew_s); } /* @@ -569,12 +579,18 @@ static void _synchronize_rcu_expedited(struct rcu_state *rsp, if (exp_funnel_lock(rsp, s)) return; /* Someone else did our work for us. */ - /* Marshall arguments and schedule the expedited grace period. */ - rew.rew_func = func; - rew.rew_rsp = rsp; - rew.rew_s = s; - INIT_WORK_ONSTACK(&rew.rew_work, wait_rcu_exp_gp); - schedule_work(&rew.rew_work); + /* Ensure that load happens before action based on it. */ + if (unlikely(rcu_scheduler_active == RCU_SCHEDULER_INIT)) { + /* Direct call during scheduler init and early_initcalls(). */ + rcu_exp_sel_wait_wake(rsp, func, s); + } else { + /* Marshall arguments & schedule the expedited grace period. */ + rew.rew_func = func; + rew.rew_rsp = rsp; + rew.rew_s = s; + INIT_WORK_ONSTACK(&rew.rew_work, wait_rcu_exp_gp); + schedule_work(&rew.rew_work); + } /* Wait for expedited grace period to complete. */ rdp = per_cpu_ptr(rsp->rda, raw_smp_processor_id()); @@ -676,6 +692,8 @@ void synchronize_rcu_expedited(void) { struct rcu_state *rsp = rcu_state_p; + if (rcu_scheduler_active == RCU_SCHEDULER_INACTIVE) + return; _synchronize_rcu_expedited(rsp, sync_rcu_exp_handler); } EXPORT_SYMBOL_GPL(synchronize_rcu_expedited); @@ -693,3 +711,15 @@ void synchronize_rcu_expedited(void) EXPORT_SYMBOL_GPL(synchronize_rcu_expedited); #endif /* #else #ifdef CONFIG_PREEMPT_RCU */ + +/* + * Switch to run-time mode once Tree RCU has fully initialized. + */ +static int __init rcu_exp_runtime_mode(void) +{ + rcu_test_sync_prims(); + rcu_scheduler_active = RCU_SCHEDULER_RUNNING; + rcu_test_sync_prims(); + return 0; +} +core_initcall(rcu_exp_runtime_mode); diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h index 85c5a883c6e3..56583e764ebf 100644 --- a/kernel/rcu/tree_plugin.h +++ b/kernel/rcu/tree_plugin.h @@ -670,7 +670,7 @@ void synchronize_rcu(void) lock_is_held(&rcu_lock_map) || lock_is_held(&rcu_sched_lock_map), "Illegal synchronize_rcu() in RCU read-side critical section"); - if (!rcu_scheduler_active) + if (rcu_scheduler_active == RCU_SCHEDULER_INACTIVE) return; if (rcu_gp_is_expedited()) synchronize_rcu_expedited(); diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c index f19271dce0a9..4f6db7e6a117 100644 --- a/kernel/rcu/update.c +++ b/kernel/rcu/update.c @@ -121,11 +121,14 @@ EXPORT_SYMBOL(rcu_read_lock_sched_held); * Should expedited grace-period primitives always fall back to their * non-expedited counterparts? Intended for use within RCU. Note * that if the user specifies both rcu_expedited and rcu_normal, then - * rcu_normal wins. + * rcu_normal wins. (Except during the time period during boot from + * when the first task is spawned until the rcu_exp_runtime_mode() + * core_initcall() is invoked, at which point everything is expedited.) */ bool rcu_gp_is_normal(void) { - return READ_ONCE(rcu_normal); + return READ_ONCE(rcu_normal) && + rcu_scheduler_active != RCU_SCHEDULER_INIT; } EXPORT_SYMBOL_GPL(rcu_gp_is_normal); @@ -135,13 +138,14 @@ static atomic_t rcu_expedited_nesting = /* * Should normal grace-period primitives be expedited? Intended for * use within RCU. Note that this function takes the rcu_expedited - * sysfs/boot variable into account as well as the rcu_expedite_gp() - * nesting. So looping on rcu_unexpedite_gp() until rcu_gp_is_expedited() - * returns false is a -really- bad idea. + * sysfs/boot variable and rcu_scheduler_active into account as well + * as the rcu_expedite_gp() nesting. So looping on rcu_unexpedite_gp() + * until rcu_gp_is_expedited() returns false is a -really- bad idea. */ bool rcu_gp_is_expedited(void) { - return rcu_expedited || atomic_read(&rcu_expedited_nesting); + return rcu_expedited || atomic_read(&rcu_expedited_nesting) || + rcu_scheduler_active == RCU_SCHEDULER_INIT; } EXPORT_SYMBOL_GPL(rcu_gp_is_expedited); @@ -257,7 +261,7 @@ EXPORT_SYMBOL_GPL(rcu_callback_map); int notrace debug_lockdep_rcu_enabled(void) { - return rcu_scheduler_active && debug_locks && + return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && debug_locks && current->lockdep_recursion == 0; } EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled); @@ -591,7 +595,7 @@ EXPORT_SYMBOL_GPL(call_rcu_tasks); void synchronize_rcu_tasks(void) { /* Complain if the scheduler has not started. */ - RCU_LOCKDEP_WARN(!rcu_scheduler_active, + RCU_LOCKDEP_WARN(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE, "synchronize_rcu_tasks called too soon"); /* Wait for the grace period. */ @@ -813,6 +817,23 @@ static void rcu_spawn_tasks_kthread(void) #endif /* #ifdef CONFIG_TASKS_RCU */ +/* + * Test each non-SRCU synchronous grace-period wait API. This is + * useful just after a change in mode for these primitives, and + * during early boot. + */ +void rcu_test_sync_prims(void) +{ + if (!IS_ENABLED(CONFIG_PROVE_RCU)) + return; + synchronize_rcu(); + synchronize_rcu_bh(); + synchronize_sched(); + synchronize_rcu_expedited(); + synchronize_rcu_bh_expedited(); + synchronize_sched_expedited(); +} + #ifdef CONFIG_PROVE_RCU /* @@ -865,6 +886,7 @@ void rcu_early_boot_tests(void) early_boot_test_call_rcu_bh(); if (rcu_self_test_sched) early_boot_test_call_rcu_sched(); + rcu_test_sync_prims(); } static int rcu_verify_early_boot_tests(void) From 602d9858f07c72eab64f5f00e2fae55f9902cfbe Mon Sep 17 00:00:00 2001 From: Nikita Yushchenko Date: Wed, 11 Jan 2017 21:56:31 +0300 Subject: [PATCH 469/645] swiotlb: ensure that page-sized mappings are page-aligned Some drivers do depend on page mappings to be page aligned. Swiotlb already enforces such alignment for mappings greater than page, extend that to page-sized mappings as well. Without this fix, nvme hits BUG() in nvme_setup_prps(), because that routine assumes page-aligned mappings. Signed-off-by: Nikita Yushchenko Reviewed-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Konrad Rzeszutek Wilk --- lib/swiotlb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 975b8fc4f1e1..a8d74a733a38 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -483,11 +483,11 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, : 1UL << (BITS_PER_LONG - IO_TLB_SHIFT); /* - * For mappings greater than a page, we limit the stride (and - * hence alignment) to a page size. + * For mappings greater than or equal to a page, we limit the stride + * (and hence alignment) to a page size. */ nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT; - if (size > PAGE_SIZE) + if (size >= PAGE_SIZE) stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT)); else stride = 1; From 49def1853334396f948dcb4cedb9347abb318df5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 15 Jan 2017 16:21:59 -0800 Subject: [PATCH 470/645] Linux 4.10-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 5f1a84735ff6..96e2352d10a8 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Roaring Lionus # *DOCUMENTATION* From 75f01a4c9cc291ff5cb28ca1216adb163b7a20ee Mon Sep 17 00:00:00 2001 From: Lance Richardson Date: Thu, 12 Jan 2017 19:33:18 -0500 Subject: [PATCH 471/645] openvswitch: maintain correct checksum state in conntrack actions When executing conntrack actions on skbuffs with checksum mode CHECKSUM_COMPLETE, the checksum must be updated to account for header pushes and pulls. Otherwise we get "hw csum failure" logs similar to this (ICMP packet received on geneve tunnel via ixgbe NIC): [ 405.740065] genev_sys_6081: hw csum failure [ 405.740106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G I 4.10.0-rc3+ #1 [ 405.740108] Call Trace: [ 405.740110] [ 405.740113] dump_stack+0x63/0x87 [ 405.740116] netdev_rx_csum_fault+0x3a/0x40 [ 405.740118] __skb_checksum_complete+0xcf/0xe0 [ 405.740120] nf_ip_checksum+0xc8/0xf0 [ 405.740124] icmp_error+0x1de/0x351 [nf_conntrack_ipv4] [ 405.740132] nf_conntrack_in+0xe1/0x550 [nf_conntrack] [ 405.740137] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [ 405.740143] __ovs_ct_lookup+0x95/0x980 [openvswitch] [ 405.740145] ? netif_rx_internal+0x44/0x110 [ 405.740149] ovs_ct_execute+0x147/0x4b0 [openvswitch] [ 405.740153] do_execute_actions+0x22e/0xa70 [openvswitch] [ 405.740157] ovs_execute_actions+0x40/0x120 [openvswitch] [ 405.740161] ovs_dp_process_packet+0x84/0x120 [openvswitch] [ 405.740166] ovs_vport_receive+0x73/0xd0 [openvswitch] [ 405.740168] ? udp_rcv+0x1a/0x20 [ 405.740170] ? ip_local_deliver_finish+0x93/0x1e0 [ 405.740172] ? ip_local_deliver+0x6f/0xe0 [ 405.740174] ? ip_rcv_finish+0x3a0/0x3a0 [ 405.740176] ? ip_rcv_finish+0xdb/0x3a0 [ 405.740177] ? ip_rcv+0x2a7/0x400 [ 405.740180] ? __netif_receive_skb_core+0x970/0xa00 [ 405.740185] netdev_frame_hook+0xd3/0x160 [openvswitch] [ 405.740187] __netif_receive_skb_core+0x1dc/0xa00 [ 405.740194] ? ixgbe_clean_rx_irq+0x46d/0xa20 [ixgbe] [ 405.740197] __netif_receive_skb+0x18/0x60 [ 405.740199] netif_receive_skb_internal+0x40/0xb0 [ 405.740201] napi_gro_receive+0xcd/0x120 [ 405.740204] gro_cell_poll+0x57/0x80 [geneve] [ 405.740206] net_rx_action+0x260/0x3c0 [ 405.740209] __do_softirq+0xc9/0x28c [ 405.740211] irq_exit+0xd9/0xf0 [ 405.740213] do_IRQ+0x51/0xd0 [ 405.740215] common_interrupt+0x93/0x93 Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Lance Richardson Acked-by: Pravin B Shelar Signed-off-by: David S. Miller --- net/openvswitch/conntrack.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c index 6b78bab27755..54253ea5976e 100644 --- a/net/openvswitch/conntrack.c +++ b/net/openvswitch/conntrack.c @@ -514,7 +514,7 @@ static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct, int hooknum, nh_off, err = NF_ACCEPT; nh_off = skb_network_offset(skb); - skb_pull(skb, nh_off); + skb_pull_rcsum(skb, nh_off); /* See HOOK2MANIP(). */ if (maniptype == NF_NAT_MANIP_SRC) @@ -579,6 +579,7 @@ static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct, err = nf_nat_packet(ct, ctinfo, hooknum, skb); push: skb_push(skb, nh_off); + skb_postpush_rcsum(skb, skb->data, nh_off); return err; } @@ -886,7 +887,7 @@ int ovs_ct_execute(struct net *net, struct sk_buff *skb, /* The conntrack module expects to be working at L3. */ nh_ofs = skb_network_offset(skb); - skb_pull(skb, nh_ofs); + skb_pull_rcsum(skb, nh_ofs); if (key->ip.frag != OVS_FRAG_TYPE_NONE) { err = handle_fragments(net, key, info->zone.id, skb); @@ -900,6 +901,7 @@ int ovs_ct_execute(struct net *net, struct sk_buff *skb, err = ovs_ct_lookup(net, key, info, skb); skb_push(skb, nh_ofs); + skb_postpush_rcsum(skb, skb->data, nh_ofs); if (err) kfree_skb(skb); return err; From e991c24d68b8c0ba297eeb7af80b1e398e98c33f Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 28 Dec 2016 11:33:48 +0100 Subject: [PATCH 472/645] s390/ctl_reg: make __ctl_load a full memory barrier We have quite a lot of code that depends on the order of the __ctl_load inline assemby and subsequent memory accesses, like e.g. disabling lowcore protection and the writing to lowcore. Since the __ctl_load macro does not have memory barrier semantics, nor any other dependencies the compiler is, theoretically, free to shuffle code around. Or in other words: storing to lowcore could happen before lowcore protection is disabled. In order to avoid this class of potential bugs simply add a full memory barrier to the __ctl_load macro. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/ctl_reg.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h index d7697ab802f6..8e136b88cdf4 100644 --- a/arch/s390/include/asm/ctl_reg.h +++ b/arch/s390/include/asm/ctl_reg.h @@ -15,7 +15,9 @@ BUILD_BUG_ON(sizeof(addrtype) != (high - low + 1) * sizeof(long));\ asm volatile( \ " lctlg %1,%2,%0\n" \ - : : "Q" (*(addrtype *)(&array)), "i" (low), "i" (high));\ + : \ + : "Q" (*(addrtype *)(&array)), "i" (low), "i" (high) \ + : "memory"); \ } #define __ctl_store(array, low, high) { \ From 1d9995771fcbdd70d975b8dac4a201e76c9a2537 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 9 Jan 2017 13:23:55 +0100 Subject: [PATCH 473/645] s390: update defconfigs Signed-off-by: Heiko Carstens --- arch/s390/configs/default_defconfig | 27 +++++++------ arch/s390/configs/gcov_defconfig | 50 +++++++++++++++---------- arch/s390/configs/performance_defconfig | 33 ++++++++++------ arch/s390/defconfig | 5 ++- 4 files changed, 67 insertions(+), 48 deletions(-) diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig index e659daffe368..e00975361fec 100644 --- a/arch/s390/configs/default_defconfig +++ b/arch/s390/configs/default_defconfig @@ -69,7 +69,7 @@ CONFIG_CMA=y CONFIG_CMA_DEBUG=y CONFIG_CMA_DEBUGFS=y CONFIG_MEM_SOFT_DIRTY=y -CONFIG_ZPOOL=m +CONFIG_ZSWAP=y CONFIG_ZBUD=m CONFIG_ZSMALLOC=m CONFIG_ZSMALLOC_STAT=y @@ -141,8 +141,6 @@ CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CONNTRACK_TIMEOUT=y CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m @@ -159,13 +157,12 @@ CONFIG_NF_TABLES=m CONFIG_NFT_EXTHDR=m CONFIG_NFT_META=m CONFIG_NFT_CT=m -CONFIG_NFT_RBTREE=m -CONFIG_NFT_HASH=m CONFIG_NFT_COUNTER=m CONFIG_NFT_LOG=m CONFIG_NFT_LIMIT=m CONFIG_NFT_NAT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m @@ -219,7 +216,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m @@ -258,7 +254,6 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IP_VS_PE_SIP=m CONFIG_NF_CONNTRACK_IPV4=m -# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set CONFIG_NF_TABLES_IPV4=m CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NF_TABLES_ARP=m @@ -436,7 +431,6 @@ CONFIG_EQUALIZER=m CONFIG_IFB=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m -CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_TUN=m CONFIG_VETH=m @@ -480,6 +474,7 @@ CONFIG_VIRTIO_BALLOON=m CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ENCRYPTION=y CONFIG_JBD2_DEBUG=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y @@ -592,14 +587,12 @@ CONFIG_LOCK_STAT=y CONFIG_DEBUG_LOCKDEP=y CONFIG_DEBUG_ATOMIC_SLEEP=y CONFIG_DEBUG_LOCKING_API_SELFTESTS=y -CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_NOTIFIERS=y CONFIG_DEBUG_CREDENTIALS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=300 CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_CPU_NOTIFIER_ERROR_INJECT=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m CONFIG_FAULT_INJECTION=y CONFIG_FAILSLAB=y @@ -618,6 +611,7 @@ CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_UPROBE_EVENT=y CONFIG_FUNCTION_PROFILER=y +CONFIG_HIST_TRIGGERS=y CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_TEST_LIST_SORT=y @@ -630,6 +624,7 @@ CONFIG_TEST_STRING_HELPERS=y CONFIG_TEST_KSTRTOX=y CONFIG_DMA_API_DEBUG=y CONFIG_TEST_BPF=m +CONFIG_BUG_ON_DATA_CORRUPTION=y CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y @@ -640,16 +635,18 @@ CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_IMA=y CONFIG_IMA_APPRAISE=y +CONFIG_CRYPTO_RSA=m +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_USER=m -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m @@ -673,11 +670,13 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_LZO=m +CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_ZCRYPT=m CONFIG_CRYPTO_SHA1_S390=m CONFIG_CRYPTO_SHA256_S390=m diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig index 95ceac50bc65..f05d2d6e1087 100644 --- a/arch/s390/configs/gcov_defconfig +++ b/arch/s390/configs/gcov_defconfig @@ -12,6 +12,7 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y +# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y CONFIG_BLK_CGROUP=y @@ -54,8 +55,9 @@ CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y +CONFIG_LIVEPATCH=y CONFIG_TUNE_ZEC12=y -CONFIG_NR_CPUS=256 +CONFIG_NR_CPUS=512 CONFIG_NUMA=y CONFIG_HZ_100=y CONFIG_MEMORY_HOTPLUG=y @@ -65,6 +67,7 @@ CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y CONFIG_CMA=y +CONFIG_MEM_SOFT_DIRTY=y CONFIG_ZSWAP=y CONFIG_ZBUD=m CONFIG_ZSMALLOC=m @@ -136,8 +139,6 @@ CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CONNTRACK_TIMEOUT=y CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m @@ -154,13 +155,12 @@ CONFIG_NF_TABLES=m CONFIG_NFT_EXTHDR=m CONFIG_NFT_META=m CONFIG_NFT_CT=m -CONFIG_NFT_RBTREE=m -CONFIG_NFT_HASH=m CONFIG_NFT_COUNTER=m CONFIG_NFT_LOG=m CONFIG_NFT_LIMIT=m CONFIG_NFT_NAT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m @@ -214,7 +214,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m @@ -253,7 +252,6 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IP_VS_PE_SIP=m CONFIG_NF_CONNTRACK_IPV4=m -# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set CONFIG_NF_TABLES_IPV4=m CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NF_TABLES_ARP=m @@ -430,7 +428,6 @@ CONFIG_EQUALIZER=m CONFIG_IFB=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m -CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_TUN=m CONFIG_VETH=m @@ -460,6 +457,7 @@ CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +# CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_SOFT_WATCHDOG=m @@ -473,6 +471,7 @@ CONFIG_VIRTIO_BALLOON=m CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ENCRYPTION=y CONFIG_JBD2_DEBUG=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y @@ -495,6 +494,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=y CONFIG_CUSE=m CONFIG_OVERLAY_FS=m +CONFIG_OVERLAY_FS_REDIRECT_DIR=y CONFIG_FSCACHE=m CONFIG_CACHEFILES=m CONFIG_ISO9660_FS=y @@ -551,25 +551,27 @@ CONFIG_FRAME_WARN=1024 CONFIG_UNUSED_SYMBOLS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m CONFIG_PANIC_ON_OOPS=y CONFIG_TIMER_STATS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=60 -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_CPU_NOTIFIER_ERROR_INJECT=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m CONFIG_LATENCYTOP=y +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y -# CONFIG_KPROBE_EVENT is not set +CONFIG_UPROBE_EVENT=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_HIST_TRIGGERS=y CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m -CONFIG_RBTREE_TEST=m -CONFIG_INTERVAL_TREE_TEST=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m +CONFIG_BUG_ON_DATA_CORRUPTION=y CONFIG_S390_PTDUMP=y +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_BIG_KEYS=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y @@ -577,18 +579,25 @@ CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_INTEGRITY_SIGNATURE=y +CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y CONFIG_IMA=y +CONFIG_IMA_WRITE_POLICY=y CONFIG_IMA_APPRAISE=y +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m @@ -598,6 +607,7 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m @@ -612,10 +622,13 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_ZCRYPT=m CONFIG_CRYPTO_SHA1_S390=m CONFIG_CRYPTO_SHA256_S390=m @@ -624,9 +637,6 @@ CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m -CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m CONFIG_CRC8=m CONFIG_CORDIC=m diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index bc7b176f5795..2cf87343b590 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -65,6 +65,7 @@ CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y CONFIG_CMA=y +CONFIG_MEM_SOFT_DIRTY=y CONFIG_ZSWAP=y CONFIG_ZBUD=m CONFIG_ZSMALLOC=m @@ -136,8 +137,6 @@ CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CONNTRACK_TIMEOUT=y CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m @@ -154,13 +153,12 @@ CONFIG_NF_TABLES=m CONFIG_NFT_EXTHDR=m CONFIG_NFT_META=m CONFIG_NFT_CT=m -CONFIG_NFT_RBTREE=m -CONFIG_NFT_HASH=m CONFIG_NFT_COUNTER=m CONFIG_NFT_LOG=m CONFIG_NFT_LIMIT=m CONFIG_NFT_NAT=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m CONFIG_NETFILTER_XT_SET=m CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m @@ -214,7 +212,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m @@ -253,7 +250,6 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IP_VS_PE_SIP=m CONFIG_NF_CONNTRACK_IPV4=m -# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set CONFIG_NF_TABLES_IPV4=m CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NF_TABLES_ARP=m @@ -430,7 +426,6 @@ CONFIG_EQUALIZER=m CONFIG_IFB=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m -CONFIG_IPVLAN=m CONFIG_VXLAN=m CONFIG_TUN=m CONFIG_VETH=m @@ -474,6 +469,7 @@ CONFIG_VIRTIO_BALLOON=m CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ENCRYPTION=y CONFIG_JBD2_DEBUG=y CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y @@ -496,6 +492,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=y CONFIG_CUSE=m CONFIG_OVERLAY_FS=m +CONFIG_OVERLAY_FS_REDIRECT_DIR=y CONFIG_FSCACHE=m CONFIG_CACHEFILES=m CONFIG_ISO9660_FS=y @@ -563,12 +560,16 @@ CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_UPROBE_EVENT=y CONFIG_FUNCTION_PROFILER=y +CONFIG_HIST_TRIGGERS=y CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_LKDTM=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m +CONFIG_BUG_ON_DATA_CORRUPTION=y CONFIG_S390_PTDUMP=y +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_BIG_KEYS=y CONFIG_ENCRYPTED_KEYS=m CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y @@ -576,18 +577,25 @@ CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_INTEGRITY_SIGNATURE=y +CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y CONFIG_IMA=y +CONFIG_IMA_WRITE_POLICY=y CONFIG_IMA_APPRAISE=y +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m @@ -597,6 +605,7 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_ANUBIS=m @@ -611,10 +620,13 @@ CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_ZCRYPT=m CONFIG_CRYPTO_SHA1_S390=m CONFIG_CRYPTO_SHA256_S390=m @@ -623,9 +635,6 @@ CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m -CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m CONFIG_CRC8=m CONFIG_CORDIC=m diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 2d40ef0a6295..d00e368fb5e6 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -38,7 +38,6 @@ CONFIG_JUMP_LABEL=y CONFIG_STATIC_KEYS_SELFTEST=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y @@ -130,8 +129,11 @@ CONFIG_DUMMY=m CONFIG_EQUALIZER=m CONFIG_TUN=m CONFIG_VIRTIO_NET=y +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set # CONFIG_INPUT is not set # CONFIG_SERIO is not set +CONFIG_DEVKMEM=y CONFIG_RAW_DRIVER=m CONFIG_VIRTIO_BALLOON=y CONFIG_EXT4_FS=y @@ -183,7 +185,6 @@ CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_KPROBES_SANITY_TEST=y CONFIG_S390_PTDUMP=y CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m From ca02954ada711b08e5b0d84590a631fd63ed39f9 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Thu, 12 Jan 2017 16:09:44 +0100 Subject: [PATCH 474/645] usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value USBTrdTim must be programmed to 0x5 when phy has a UTMI+ 16-bit wide interface or 0x9 when it has a 8-bit wide interface. GUSBCFG reset value (Value After Reset: 0x1400) sets USBTrdTim to 0x5. In case of 8-bit UTMI+, without clearing GUSBCFG.USBTRDTIM mask, USBTrdTim results in 0xD (0x5 | 0x9). That's why we need to clear GUSBCFG.USBTRDTIM mask before setting USBTrdTim value, to ensure USBTrdTim is correctly set in case of 8-bit UTMI+. Signed-off-by: Amelie Delaunay Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2a9e51c176cc..77c5fcf3a5bf 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3169,7 +3169,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, /* keep other bits untouched (so e.g. forced modes are not lost) */ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP | - GUSBCFG_HNPCAP); + GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK); if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS && (hsotg->params.speed == DWC2_SPEED_PARAM_FULL || @@ -4123,7 +4123,7 @@ static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg) /* keep other bits untouched (so e.g. forced modes are not lost) */ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP | - GUSBCFG_HNPCAP); + GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK); /* set the PLL on, remove the HNP/SRP and set the PHY */ trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5; From efe357f4633a12ca89bdf9bbdd8aaf5a7a0cc3c0 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Thu, 12 Jan 2017 17:33:26 +0100 Subject: [PATCH 475/645] usb: dwc2: host: fix Wmaybe-uninitialized warning Uninitialized char* causes a sparse build-warning, fix it up by initializing it to NULL. Acked-by: John Youn Signed-off-by: Nicholas Mc Guire Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 8b264d4aaaeb..46d0ad5105e4 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4492,8 +4492,8 @@ static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, { #ifdef VERBOSE_DEBUG struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); - char *pipetype; - char *speed; + char *pipetype = NULL; + char *speed = NULL; dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); dev_vdbg(hsotg->dev, " Device address: %d\n", From 4205e4786d0b9fc3b4fec7b1910cf645a0468307 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 10 Jan 2017 14:01:05 +0100 Subject: [PATCH 476/645] cpu/hotplug: Provide dynamic range for prepare stage Mathieu reported that the LTTNG modules are broken as of 4.10-rc1 due to the removal of the cpu hotplug notifiers. Usually I don't care much about out of tree modules, but LTTNG is widely used in distros. There are two ways to solve that: 1) Reserve a hotplug state for LTTNG 2) Add a dynamic range for the prepare states. While #1 is the simplest solution, #2 is the proper one as we can convert in tree users, which do not care about ordering, to the dynamic range as well. Add a dynamic range which allows LTTNG to request states in the prepare stage. Reported-and-tested-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Reviewed-by: Mathieu Desnoyers Cc: Peter Zijlstra Cc: Sebastian Sewior Cc: Steven Rostedt Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701101353010.3401@nanos Signed-off-by: Thomas Gleixner --- include/linux/cpuhotplug.h | 2 ++ kernel/cpu.c | 22 ++++++++++++++++++---- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 20bfefbe7594..d936a0021839 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -74,6 +74,8 @@ enum cpuhp_state { CPUHP_ZCOMP_PREPARE, CPUHP_TIMERS_DEAD, CPUHP_MIPS_SOC_PREPARE, + CPUHP_BP_PREPARE_DYN, + CPUHP_BP_PREPARE_DYN_END = CPUHP_BP_PREPARE_DYN + 20, CPUHP_BRINGUP_CPU, CPUHP_AP_IDLE_DEAD, CPUHP_AP_OFFLINE, diff --git a/kernel/cpu.c b/kernel/cpu.c index f75c4d031eeb..c47506357519 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -1302,10 +1302,24 @@ static int cpuhp_cb_check(enum cpuhp_state state) */ static int cpuhp_reserve_state(enum cpuhp_state state) { - enum cpuhp_state i; + enum cpuhp_state i, end; + struct cpuhp_step *step; - for (i = CPUHP_AP_ONLINE_DYN; i <= CPUHP_AP_ONLINE_DYN_END; i++) { - if (!cpuhp_ap_states[i].name) + switch (state) { + case CPUHP_AP_ONLINE_DYN: + step = cpuhp_ap_states + CPUHP_AP_ONLINE_DYN; + end = CPUHP_AP_ONLINE_DYN_END; + break; + case CPUHP_BP_PREPARE_DYN: + step = cpuhp_bp_states + CPUHP_BP_PREPARE_DYN; + end = CPUHP_BP_PREPARE_DYN_END; + break; + default: + return -EINVAL; + } + + for (i = state; i <= end; i++, step++) { + if (!step->name) return i; } WARN(1, "No more dynamic states available for CPU hotplug\n"); @@ -1323,7 +1337,7 @@ static int cpuhp_store_callbacks(enum cpuhp_state state, const char *name, mutex_lock(&cpuhp_state_mutex); - if (state == CPUHP_AP_ONLINE_DYN) { + if (state == CPUHP_AP_ONLINE_DYN || state == CPUHP_BP_PREPARE_DYN) { ret = cpuhp_reserve_state(state); if (ret < 0) goto out; From ee6ff743e3a4b697e8286054667d7e4e1b56510d Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 13 Jan 2017 12:05:03 +0100 Subject: [PATCH 477/645] mmc: core: Restore parts of the polling policy when switch to HS/HS DDR Regressions for not being able to detect an eMMC HS DDR mode card has been reported for the sdhci-esdhc-imx driver, but potentially other sdhci variants may suffer from the similar problem. The commit e173f8911f09 ("mmc: core: Update CMD13 polling policy when switch to HS DDR mode"), is causing the problem. It seems that change moved one step to far, regarding changing the host's timing before polling for a busy card. To fix this, let's move back to the behaviour when the host's timing is updated after the polling, but before the switch status is fetched and validated. In cases when polling with CMD13, we keep validating the switch status at each attempt. However, to align with the other card busy detections mechanism, let's fetch and validate the switch status also after the host's timing is updated. Reported-by: Clemens Gruber Reported-by: Gary Bisson Fixes: e173f8911f09 ("mmc: core: Update CMD13 polling policy when switch..") Cc: Shawn Lin Cc: Dong Aisheng Cc: Haibo Chen Signed-off-by: Ulf Hansson Tested-by: Clemens Gruber Tested-by: Jagan Teki Reviewed-by: Shawn Lin Tested-by: Haibo Chen Reviewed-by: Dong Aisheng --- drivers/mmc/core/mmc_ops.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index b11c3455b040..e6ea8503f40c 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -506,9 +506,6 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, } } while (busy); - if (host->ops->card_busy && send_status) - return mmc_switch_status(card); - return 0; } @@ -577,24 +574,26 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, if (!use_busy_signal) goto out; - /* Switch to new timing before poll and check switch status. */ - if (timing) - mmc_set_timing(host, timing); - /*If SPI or used HW busy detection above, then we don't need to poll. */ if (((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) || - mmc_host_is_spi(host)) { - if (send_status) - err = mmc_switch_status(card); + mmc_host_is_spi(host)) goto out_tim; - } /* Let's try to poll to find out when the command is completed. */ err = mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err); + if (err) + goto out; out_tim: - if (err && timing) - mmc_set_timing(host, old_timing); + /* Switch to new timing before check switch status. */ + if (timing) + mmc_set_timing(host, timing); + + if (send_status) { + err = mmc_switch_status(card); + if (err && timing) + mmc_set_timing(host, old_timing); + } out: mmc_retune_release(host); From 8cf699ec849f4ca1413cea01289bd7d37dbcc626 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 13 Jan 2017 08:39:24 -0800 Subject: [PATCH 478/645] mlx4: do not call napi_schedule() without care Disable BH around the call to napi_schedule() to avoid following warning [ 52.095499] NOHZ: local_softirq_pending 08 [ 52.421291] NOHZ: local_softirq_pending 08 [ 52.608313] NOHZ: local_softirq_pending 08 Fixes: 8d59de8f7bb3 ("net/mlx4_en: Process all completions in RX rings after port goes up") Signed-off-by: Eric Dumazet Cc: Erez Shitrit Cc: Eugenia Emantayev Cc: Tariq Toukan Acked-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 4910d9af1933..761f8b12399c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1748,8 +1748,11 @@ int mlx4_en_start_port(struct net_device *dev) /* Process all completions if exist to prevent * the queues freezing if they are full */ - for (i = 0; i < priv->rx_ring_num; i++) + for (i = 0; i < priv->rx_ring_num; i++) { + local_bh_disable(); napi_schedule(&priv->rx_cq[i]->napi); + local_bh_enable(); + } netif_tx_start_all_queues(dev); netif_device_attach(dev); From 0d7f4f0594fc38531e37b94a73ea3ebcc9d9bc11 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 1 Nov 2016 20:27:13 +0000 Subject: [PATCH 479/645] MAINTAINERS: update rmk's entries Update my entries in the MAINTAINERS file with the same email address for kernel work, and, now that the git tree is hosted on more suitable hardware, add git tree references where appropriate. Signed-off-by: Russell King --- MAINTAINERS | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index cfff2c9e3d94..cbba484b0913 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -977,6 +977,7 @@ M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.armlinux.org.uk/ S: Maintained +T: git git://git.armlinux.org.uk/~rmk/linux-arm.git F: arch/arm/ ARM SUB-ARCHITECTURES @@ -1154,6 +1155,7 @@ ARM/CLKDEV SUPPORT M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +T: git git://git.armlinux.org.uk/~rmk/linux-arm.git clkdev F: arch/arm/include/asm/clkdev.h F: drivers/clk/clkdev.c @@ -7701,8 +7703,10 @@ F: drivers/net/dsa/mv88e6xxx/ F: Documentation/devicetree/bindings/net/dsa/marvell.txt MARVELL ARMADA DRM SUPPORT -M: Russell King +M: Russell King S: Maintained +T: git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-devel +T: git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-fixes F: drivers/gpu/drm/armada/ F: include/uapi/drm/armada_drm.h F: Documentation/devicetree/bindings/display/armada/ @@ -8893,8 +8897,10 @@ S: Supported F: drivers/nfc/nxp-nci NXP TDA998X DRM DRIVER -M: Russell King +M: Russell King S: Supported +T: git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-devel +T: git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-fixes F: drivers/gpu/drm/i2c/tda998x_drv.c F: include/drm/i2c/tda998x.h From 8ec3e8a192ba6f13be4522ee81227c792c86fb1a Mon Sep 17 00:00:00 2001 From: Masaru Nagai Date: Mon, 16 Jan 2017 11:45:21 +0100 Subject: [PATCH 480/645] ravb: do not use zero-length alignment DMA descriptor Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [] lr : [] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [] map_single+0x4c/0x98 [ 21.027411] [] swiotlb_map_page+0xa4/0x138 [ 21.033072] [] __swiotlb_map_page+0x20/0x7c [ 21.038821] [] ravb_start_xmit+0x174/0x668 [ 21.044484] [] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [] dev_queue_xmit+0x10/0x18 [ 21.067214] [] packet_sendmsg+0xf40/0x1220 [ 21.072873] [] sock_sendmsg+0x18/0x2c [ 21.078097] [] SyS_sendto+0xb0/0xf0 [ 21.083150] [] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d1902acf ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 5e5ad978eab9..89ac1e3f6175 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1504,6 +1504,19 @@ static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev) buffer = PTR_ALIGN(priv->tx_align[q], DPTR_ALIGN) + entry / NUM_TX_DESC * DPTR_ALIGN; len = PTR_ALIGN(skb->data, DPTR_ALIGN) - skb->data; + /* Zero length DMA descriptors are problematic as they seem to + * terminate DMA transfers. Avoid them by simply using a length of + * DPTR_ALIGN (4) when skb data is aligned to DPTR_ALIGN. + * + * As skb is guaranteed to have at least ETH_ZLEN (60) bytes of + * data by the call to skb_put_padto() above this is safe with + * respect to both the length of the first DMA descriptor (len) + * overflowing the available data and the length of the second DMA + * descriptor (skb->len - len) being negative. + */ + if (len == 0) + len = DPTR_ALIGN; + memcpy(buffer, skb->data, len); dma_addr = dma_map_single(ndev->dev.parent, buffer, len, DMA_TO_DEVICE); if (dma_mapping_error(ndev->dev.parent, dma_addr)) From d43e6fb4ac4abfe4ef7c102833ed02330ad701e0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 16 Jan 2017 14:20:54 +0100 Subject: [PATCH 481/645] cpmac: remove hopeless #warning The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/cpmac.c b/drivers/net/ethernet/ti/cpmac.c index 77c88fcf2b86..9b8a30bf939b 100644 --- a/drivers/net/ethernet/ti/cpmac.c +++ b/drivers/net/ethernet/ti/cpmac.c @@ -1210,7 +1210,7 @@ int cpmac_init(void) goto fail_alloc; } -#warning FIXME: unhardcode gpio&reset bits + /* FIXME: unhardcode gpio&reset bits */ ar7_gpio_disable(26); ar7_gpio_disable(27); ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); From fe68d8bfe59c561664aa87d827aa4b320eb08895 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 13 Jan 2017 22:38:27 +0100 Subject: [PATCH 482/645] be2net: fix status check in be_cmd_pmac_add() Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2 be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla Cc: Ajit Khaparde Cc: Sriharsha Basavapatna Cc: Somnath Kotur Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 0e74529a4209..30e855004c57 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -1118,7 +1118,7 @@ int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr, err: mutex_unlock(&adapter->mcc_lock); - if (status == MCC_STATUS_UNAUTHORIZED_REQUEST) + if (base_status(status) == MCC_STATUS_UNAUTHORIZED_REQUEST) status = -EPERM; return status; From 6d928ae590c8d58cfd5cca997d54394de139cbb7 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 13 Jan 2017 22:38:28 +0100 Subject: [PATCH 483/645] be2net: don't delete MAC on close on unprivileged BE3 VFs BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC, VLAN table and UC/MC lists. So don't try to delete MAC on such VFs. Cc: Sathya Perla Cc: Ajit Khaparde Cc: Sriharsha Basavapatna Cc: Somnath Kotur Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index ec010ced6c99..d606e20fe69e 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3609,7 +3609,11 @@ static void be_rx_qs_destroy(struct be_adapter *adapter) static void be_disable_if_filters(struct be_adapter *adapter) { - be_dev_mac_del(adapter, adapter->pmac_id[0]); + /* Don't delete MAC on BE3 VFs without FILTMGMT privilege */ + if (!BEx_chip(adapter) || !be_virtfn(adapter) || + check_privilege(adapter, BE_PRIV_FILTMGMT)) + be_dev_mac_del(adapter, adapter->pmac_id[0]); + be_clear_uc_list(adapter); be_clear_mc_list(adapter); From 34393529163af7163ef8459808e3cf2af7db7f16 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Fri, 13 Jan 2017 22:38:29 +0100 Subject: [PATCH 484/645] be2net: fix MAC addr setting on privileged BE3 VFs During interface opening MAC address stored in netdev->dev_addr is programmed in the HW with exception of BE3 VFs where the initial MAC is programmed by parent PF. This is OK when MAC address is not changed when an interfaces is down. In this case the requested MAC is stored to netdev->dev_addr and later is stored into HW during opening. But this is not done for all BE3 VFs so the NIC HW does not know anything about this change and all traffic is filtered. This is the case of bonding if fail_over_mac == 0 where the MACs of the slaves are changed while they are down. The be2net behavior is too restrictive because if a BE3 VF has the FILTMGMT privilege then it is able to modify its MAC without any restriction. To solve the described problem the driver should take care about these privileged BE3 VFs so the MAC is programmed during opening. And by contrast unpriviled BE3 VFs should not be allowed to change its MAC in any case. Cc: Sathya Perla Cc: Ajit Khaparde Cc: Sriharsha Basavapatna Cc: Somnath Kotur Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index d606e20fe69e..1a7f8ad7b9c6 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -318,6 +318,13 @@ static int be_mac_addr_set(struct net_device *netdev, void *p) if (ether_addr_equal(addr->sa_data, adapter->dev_mac)) return 0; + /* BE3 VFs without FILTMGMT privilege are not allowed to set its MAC + * address + */ + if (BEx_chip(adapter) && be_virtfn(adapter) && + !check_privilege(adapter, BE_PRIV_FILTMGMT)) + return -EPERM; + /* if device is not running, copy MAC to netdev->dev_addr */ if (!netif_running(netdev)) goto done; @@ -3766,8 +3773,9 @@ static int be_enable_if_filters(struct be_adapter *adapter) if (status) return status; - /* For BE3 VFs, the PF programs the initial MAC address */ - if (!(BEx_chip(adapter) && be_virtfn(adapter))) { + /* Don't add MAC on BE3 VFs without FILTMGMT privilege */ + if (!BEx_chip(adapter) || !be_virtfn(adapter) || + check_privilege(adapter, BE_PRIV_FILTMGMT)) { status = be_dev_mac_add(adapter, adapter->netdev->dev_addr); if (status) return status; From 90f92c631b210c1e97080b53a9d863783281a932 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 13 Sep 2016 12:31:17 +0100 Subject: [PATCH 485/645] ARM: 8613/1: Fix the uaccess crash on PB11MPCore The following patch was sketched by Russell in response to my crashes on the PB11MPCore after the patch for software-based priviledged no access support for ARMv8.1. See this thread: http://marc.info/?l=linux-arm-kernel&m=144051749807214&w=2 I am unsure what is going on, I suspect everyone involved in the discussion is. I just want to repost this to get the discussion restarted, as I still have to apply this patch with every kernel iteration to get my PB11MPCore Realview running. Testing by Neil Armstrong on the Oxnas NAS has revealed that this bug exist also on that widely deployed hardware, so we are probably currently regressing all ARM11MPCore systems. Cc: Russell King Cc: Will Deacon Fixes: a5e090acbf54 ("ARM: software-based priviledged-no-access support") Tested-by: Neil Armstrong Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/kernel/smp_tlb.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index 22313cb53362..9af0701f7094 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -9,6 +9,7 @@ */ #include #include +#include #include #include @@ -40,8 +41,11 @@ static inline void ipi_flush_tlb_mm(void *arg) static inline void ipi_flush_tlb_page(void *arg) { struct tlb_args *ta = (struct tlb_args *)arg; + unsigned int __ua_flags = uaccess_save_and_enable(); local_flush_tlb_page(ta->ta_vma, ta->ta_start); + + uaccess_restore(__ua_flags); } static inline void ipi_flush_tlb_kernel_page(void *arg) @@ -54,8 +58,11 @@ static inline void ipi_flush_tlb_kernel_page(void *arg) static inline void ipi_flush_tlb_range(void *arg) { struct tlb_args *ta = (struct tlb_args *)arg; + unsigned int __ua_flags = uaccess_save_and_enable(); local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); + + uaccess_restore(__ua_flags); } static inline void ipi_flush_tlb_kernel_range(void *arg) From 1666d49e1d416fcc2cce708242a52fe3317ea8ba Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 12 Jan 2017 21:19:37 +0800 Subject: [PATCH 486/645] mld: do not remove mld souce list info when set link down This is an IPv6 version of commit 24803f38a5c0 ("igmp: do not remove igmp souce list..."). In mld_del_delrec(), we will restore back all source filter info instead of flush them. Move mld_clear_delrec() from ipv6_mc_down() to ipv6_mc_destroy_dev() since we should not remove source list info when set link down. Remove igmp6_group_dropped() in ipv6_mc_destroy_dev() since we have called it in ipv6_mc_down(). Also clear all source info after igmp6_group_dropped() instead of in it because ipv6_mc_down() will call igmp6_group_dropped(). Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- net/ipv6/mcast.c | 51 ++++++++++++++++++++++++++++-------------------- 1 file changed, 30 insertions(+), 21 deletions(-) diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 14a3903f1c82..7139fffd61b6 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -81,7 +81,7 @@ static void mld_gq_timer_expire(unsigned long data); static void mld_ifc_timer_expire(unsigned long data); static void mld_ifc_event(struct inet6_dev *idev); static void mld_add_delrec(struct inet6_dev *idev, struct ifmcaddr6 *pmc); -static void mld_del_delrec(struct inet6_dev *idev, const struct in6_addr *addr); +static void mld_del_delrec(struct inet6_dev *idev, struct ifmcaddr6 *pmc); static void mld_clear_delrec(struct inet6_dev *idev); static bool mld_in_v1_mode(const struct inet6_dev *idev); static int sf_setstate(struct ifmcaddr6 *pmc); @@ -692,9 +692,9 @@ static void igmp6_group_dropped(struct ifmcaddr6 *mc) dev_mc_del(dev, buf); } - if (mc->mca_flags & MAF_NOREPORT) - goto done; spin_unlock_bh(&mc->mca_lock); + if (mc->mca_flags & MAF_NOREPORT) + return; if (!mc->idev->dead) igmp6_leave_group(mc); @@ -702,8 +702,6 @@ static void igmp6_group_dropped(struct ifmcaddr6 *mc) spin_lock_bh(&mc->mca_lock); if (del_timer(&mc->mca_timer)) atomic_dec(&mc->mca_refcnt); -done: - ip6_mc_clear_src(mc); spin_unlock_bh(&mc->mca_lock); } @@ -748,10 +746,11 @@ static void mld_add_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im) spin_unlock_bh(&idev->mc_lock); } -static void mld_del_delrec(struct inet6_dev *idev, const struct in6_addr *pmca) +static void mld_del_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im) { struct ifmcaddr6 *pmc, *pmc_prev; - struct ip6_sf_list *psf, *psf_next; + struct ip6_sf_list *psf; + struct in6_addr *pmca = &im->mca_addr; spin_lock_bh(&idev->mc_lock); pmc_prev = NULL; @@ -768,14 +767,20 @@ static void mld_del_delrec(struct inet6_dev *idev, const struct in6_addr *pmca) } spin_unlock_bh(&idev->mc_lock); + spin_lock_bh(&im->mca_lock); if (pmc) { - for (psf = pmc->mca_tomb; psf; psf = psf_next) { - psf_next = psf->sf_next; - kfree(psf); + im->idev = pmc->idev; + im->mca_crcount = idev->mc_qrv; + im->mca_sfmode = pmc->mca_sfmode; + if (pmc->mca_sfmode == MCAST_INCLUDE) { + im->mca_tomb = pmc->mca_tomb; + im->mca_sources = pmc->mca_sources; + for (psf = im->mca_sources; psf; psf = psf->sf_next) + psf->sf_crcount = im->mca_crcount; } in6_dev_put(pmc->idev); - kfree(pmc); } + spin_unlock_bh(&im->mca_lock); } static void mld_clear_delrec(struct inet6_dev *idev) @@ -904,7 +909,7 @@ int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) mca_get(mc); write_unlock_bh(&idev->lock); - mld_del_delrec(idev, &mc->mca_addr); + mld_del_delrec(idev, mc); igmp6_group_added(mc); ma_put(mc); return 0; @@ -927,6 +932,7 @@ int __ipv6_dev_mc_dec(struct inet6_dev *idev, const struct in6_addr *addr) write_unlock_bh(&idev->lock); igmp6_group_dropped(ma); + ip6_mc_clear_src(ma); ma_put(ma); return 0; @@ -2501,15 +2507,17 @@ void ipv6_mc_down(struct inet6_dev *idev) /* Withdraw multicast list */ read_lock_bh(&idev->lock); - mld_ifc_stop_timer(idev); - mld_gq_stop_timer(idev); - mld_dad_stop_timer(idev); for (i = idev->mc_list; i; i = i->next) igmp6_group_dropped(i); - read_unlock_bh(&idev->lock); - mld_clear_delrec(idev); + /* Should stop timer after group drop. or we will + * start timer again in mld_ifc_event() + */ + mld_ifc_stop_timer(idev); + mld_gq_stop_timer(idev); + mld_dad_stop_timer(idev); + read_unlock_bh(&idev->lock); } static void ipv6_mc_reset(struct inet6_dev *idev) @@ -2531,8 +2539,10 @@ void ipv6_mc_up(struct inet6_dev *idev) read_lock_bh(&idev->lock); ipv6_mc_reset(idev); - for (i = idev->mc_list; i; i = i->next) + for (i = idev->mc_list; i; i = i->next) { + mld_del_delrec(idev, i); igmp6_group_added(i); + } read_unlock_bh(&idev->lock); } @@ -2565,6 +2575,7 @@ void ipv6_mc_destroy_dev(struct inet6_dev *idev) /* Deactivate timers */ ipv6_mc_down(idev); + mld_clear_delrec(idev); /* Delete all-nodes address. */ /* We cannot call ipv6_dev_mc_dec() directly, our caller in @@ -2579,11 +2590,9 @@ void ipv6_mc_destroy_dev(struct inet6_dev *idev) write_lock_bh(&idev->lock); while ((i = idev->mc_list) != NULL) { idev->mc_list = i->next; + write_unlock_bh(&idev->lock); - - igmp6_group_dropped(i); ma_put(i); - write_lock_bh(&idev->lock); } write_unlock_bh(&idev->lock); From d2d4edbebe07ddb77980656abe7b9bc7a9e0cdf7 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 11 Jan 2017 14:59:38 +0900 Subject: [PATCH 487/645] perf probe: Fix to show correct locations for events on modules Fix to show correct locations for events on modules by relocating given address instead of retrying after failure. This happens when the module text size is big enough, bigger than sh_addr, because the original code retries with given address + sh_addr if it failed to find CU DIE at the given address. Any address smaller than sh_addr always fails and it retries with the correct address, but addresses bigger than sh_addr will get a CU DIE which is on the given address (not adjusted by sh_addr). In my environment(x86-64), the sh_addr of ".text" section is 0x10030. Since i915 is a huge kernel module, we can see this issue as below. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1 ffffffffc0270000 t i915_switcheroo_can_switch [i915] ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check symbols cross this boundary. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\ | head -n 2 ffffffffc027ff80 t haswell_init_clock_gating [i915] ffffffffc0280110 t valleyview_init_clock_gating [i915] So setup probes on both function and see what happen. $ sudo ./perf probe -m i915 -a haswell_init_clock_gating \ -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915) As you can see, haswell_init_clock_gating is correctly shown, but valleyview_init_clock_gating is not. With this patch, both events are shown correctly. $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) Committer notes: In my case: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915) probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915) # # readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name' [Nr] Name Type Address Off Size ES Flg Lk Inf Al [ 1] .text PROGBITS ffffffff81000000 200000 822fd3 00 AX 0 0 4096 # So both are b0rked, now with the fix: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) # Both looks correct. Signed-off-by: Masami Hiramatsu Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-finder.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index df4debe564da..0278fe1a4cc6 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -1543,16 +1543,12 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, unsigned long addr, Dwarf_Addr _addr = 0, baseaddr = 0; const char *fname = NULL, *func = NULL, *basefunc = NULL, *tmp; int baseline = 0, lineno = 0, ret = 0; - bool reloc = false; -retry: + /* We always need to relocate the address for aranges */ + if (debuginfo__get_text_offset(dbg, &baseaddr) == 0) + addr += baseaddr; /* Find cu die */ if (!dwarf_addrdie(dbg->dbg, (Dwarf_Addr)addr, &cudie)) { - if (!reloc && debuginfo__get_text_offset(dbg, &baseaddr) == 0) { - addr += baseaddr; - reloc = true; - goto retry; - } pr_warning("Failed to find debug information for address %lx\n", addr); ret = -EINVAL; From 02ca0423fd65a0a9c4d70da0dbb8f4b8503f08c7 Mon Sep 17 00:00:00 2001 From: Jakub Sitnicki Date: Fri, 13 Jan 2017 10:12:20 +0100 Subject: [PATCH 488/645] ip6_tunnel: Account for tunnel header in tunnel MTU With ip6gre we have a tunnel header which also makes the tunnel MTU smaller. We need to reserve room for it. Previously we were using up space reserved for the Tunnel Encapsulation Limit option header (RFC 2473). Also, after commit b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") our contract with the caller has changed. Now we check if the packet length exceeds the tunnel MTU after the tunnel header has been pushed, unlike before. This is reflected in the check where we look at the packet length minus the size of the tunnel header, which is already accounted for in tunnel MTU. Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Signed-off-by: Jakub Sitnicki Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 36d292180942..753d6d0860fb 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1108,7 +1108,7 @@ route_lookup: t->parms.name); goto tx_err_dst_release; } - mtu = dst_mtu(dst) - psh_hlen; + mtu = dst_mtu(dst) - psh_hlen - t->tun_hlen; if (encap_limit >= 0) { max_headroom += 8; mtu -= 8; @@ -1117,7 +1117,7 @@ route_lookup: mtu = IPV6_MIN_MTU; if (skb_dst(skb) && !t->parms.collect_md) skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu); - if (skb->len > mtu && !skb_is_gso(skb)) { + if (skb->len - t->tun_hlen > mtu && !skb_is_gso(skb)) { *pmtu = mtu; err = -EMSGSIZE; goto tx_err_dst_release; From 34c55cf2fc75f8bf6ba87df321038c064cf2d426 Mon Sep 17 00:00:00 2001 From: "Karicheri, Muralidharan" Date: Fri, 13 Jan 2017 09:32:34 -0500 Subject: [PATCH 489/645] net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/ti,dp83867.txt | 6 ++++-- drivers/net/phy/dp83867.c | 8 ++++++-- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 85bf945b898f..afe9630a5e7d 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -3,9 +3,11 @@ Required properties: - reg - The ID number for the phy, usually a small integer - ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values + for applicable values. Required only if interface type is + PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values + for applicable values. Required only if interface type is + PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index e84ae084e259..ca1b462bf7b2 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -132,12 +132,16 @@ static int dp83867_of_init(struct phy_device *phydev) ret = of_property_read_u32(of_node, "ti,rx-internal-delay", &dp83867->rx_id_delay); - if (ret) + if (ret && + (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)) return ret; ret = of_property_read_u32(of_node, "ti,tx-internal-delay", &dp83867->tx_id_delay); - if (ret) + if (ret && + (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) return ret; return of_property_read_u32(of_node, "ti,fifo-depth", From 57d5f64d83ab5b5a5118b1597386dd76eaf4340d Mon Sep 17 00:00:00 2001 From: Parthasarathy Bhuvaragan Date: Fri, 13 Jan 2017 15:46:25 +0100 Subject: [PATCH 490/645] tipc: allocate user memory with GFP_KERNEL flag Until now, we allocate memory always with GFP_ATOMIC flag. When the system is under memory pressure and a user tries to send, the send fails due to low memory. However, the user application can wait for free memory if we allocate it using GFP_KERNEL flag. In this commit, we use allocate memory with GFP_KERNEL for all user allocation. Reported-by: Rune Torgersen Acked-by: Jon Maloy Signed-off-by: Parthasarathy Bhuvaragan Signed-off-by: David S. Miller --- net/tipc/discover.c | 4 ++-- net/tipc/link.c | 2 +- net/tipc/msg.c | 16 ++++++++-------- net/tipc/msg.h | 2 +- net/tipc/name_distr.c | 2 +- 5 files changed, 13 insertions(+), 13 deletions(-) diff --git a/net/tipc/discover.c b/net/tipc/discover.c index 6b109a808d4c..02462d67d191 100644 --- a/net/tipc/discover.c +++ b/net/tipc/discover.c @@ -169,7 +169,7 @@ void tipc_disc_rcv(struct net *net, struct sk_buff *skb, /* Send response, if necessary */ if (respond && (mtyp == DSC_REQ_MSG)) { - rskb = tipc_buf_acquire(MAX_H_SIZE); + rskb = tipc_buf_acquire(MAX_H_SIZE, GFP_ATOMIC); if (!rskb) return; tipc_disc_init_msg(net, rskb, DSC_RESP_MSG, bearer); @@ -278,7 +278,7 @@ int tipc_disc_create(struct net *net, struct tipc_bearer *b, req = kmalloc(sizeof(*req), GFP_ATOMIC); if (!req) return -ENOMEM; - req->buf = tipc_buf_acquire(MAX_H_SIZE); + req->buf = tipc_buf_acquire(MAX_H_SIZE, GFP_ATOMIC); if (!req->buf) { kfree(req); return -ENOMEM; diff --git a/net/tipc/link.c b/net/tipc/link.c index bda89bf9f4ff..4e8647aef01c 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -1395,7 +1395,7 @@ tnl: msg_set_seqno(hdr, seqno++); pktlen = msg_size(hdr); msg_set_size(&tnlhdr, pktlen + INT_H_SIZE); - tnlskb = tipc_buf_acquire(pktlen + INT_H_SIZE); + tnlskb = tipc_buf_acquire(pktlen + INT_H_SIZE, GFP_ATOMIC); if (!tnlskb) { pr_warn("%sunable to send packet\n", link_co_err); return; diff --git a/net/tipc/msg.c b/net/tipc/msg.c index a22be502f1bd..ab02d0742476 100644 --- a/net/tipc/msg.c +++ b/net/tipc/msg.c @@ -58,12 +58,12 @@ static unsigned int align(unsigned int i) * NOTE: Headroom is reserved to allow prepending of a data link header. * There may also be unrequested tailroom present at the buffer's end. */ -struct sk_buff *tipc_buf_acquire(u32 size) +struct sk_buff *tipc_buf_acquire(u32 size, gfp_t gfp) { struct sk_buff *skb; unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u; - skb = alloc_skb_fclone(buf_size, GFP_ATOMIC); + skb = alloc_skb_fclone(buf_size, gfp); if (skb) { skb_reserve(skb, BUF_HEADROOM); skb_put(skb, size); @@ -95,7 +95,7 @@ struct sk_buff *tipc_msg_create(uint user, uint type, struct tipc_msg *msg; struct sk_buff *buf; - buf = tipc_buf_acquire(hdr_sz + data_sz); + buf = tipc_buf_acquire(hdr_sz + data_sz, GFP_ATOMIC); if (unlikely(!buf)) return NULL; @@ -261,7 +261,7 @@ int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, /* No fragmentation needed? */ if (likely(msz <= pktmax)) { - skb = tipc_buf_acquire(msz); + skb = tipc_buf_acquire(msz, GFP_KERNEL); if (unlikely(!skb)) return -ENOMEM; skb_orphan(skb); @@ -282,7 +282,7 @@ int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, msg_set_importance(&pkthdr, msg_importance(mhdr)); /* Prepare first fragment */ - skb = tipc_buf_acquire(pktmax); + skb = tipc_buf_acquire(pktmax, GFP_KERNEL); if (!skb) return -ENOMEM; skb_orphan(skb); @@ -313,7 +313,7 @@ int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, pktsz = drem + INT_H_SIZE; else pktsz = pktmax; - skb = tipc_buf_acquire(pktsz); + skb = tipc_buf_acquire(pktsz, GFP_KERNEL); if (!skb) { rc = -ENOMEM; goto error; @@ -448,7 +448,7 @@ bool tipc_msg_make_bundle(struct sk_buff **skb, struct tipc_msg *msg, if (msz > (max / 2)) return false; - _skb = tipc_buf_acquire(max); + _skb = tipc_buf_acquire(max, GFP_ATOMIC); if (!_skb) return false; @@ -496,7 +496,7 @@ bool tipc_msg_reverse(u32 own_node, struct sk_buff **skb, int err) /* Never return SHORT header; expand by replacing buffer if necessary */ if (msg_short(hdr)) { - *skb = tipc_buf_acquire(BASIC_H_SIZE + dlen); + *skb = tipc_buf_acquire(BASIC_H_SIZE + dlen, GFP_ATOMIC); if (!*skb) goto exit; memcpy((*skb)->data + BASIC_H_SIZE, msg_data(hdr), dlen); diff --git a/net/tipc/msg.h b/net/tipc/msg.h index 8d408612ffa4..2c3dc38abf9c 100644 --- a/net/tipc/msg.h +++ b/net/tipc/msg.h @@ -820,7 +820,7 @@ static inline bool msg_is_reset(struct tipc_msg *hdr) return (msg_user(hdr) == LINK_PROTOCOL) && (msg_type(hdr) == RESET_MSG); } -struct sk_buff *tipc_buf_acquire(u32 size); +struct sk_buff *tipc_buf_acquire(u32 size, gfp_t gfp); bool tipc_msg_validate(struct sk_buff *skb); bool tipc_msg_reverse(u32 own_addr, struct sk_buff **skb, int err); void tipc_msg_init(u32 own_addr, struct tipc_msg *m, u32 user, u32 type, diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c index c1cfd92de17a..23f8899e0f8c 100644 --- a/net/tipc/name_distr.c +++ b/net/tipc/name_distr.c @@ -69,7 +69,7 @@ static struct sk_buff *named_prepare_buf(struct net *net, u32 type, u32 size, u32 dest) { struct tipc_net *tn = net_generic(net, tipc_net_id); - struct sk_buff *buf = tipc_buf_acquire(INT_H_SIZE + size); + struct sk_buff *buf = tipc_buf_acquire(INT_H_SIZE + size, GFP_ATOMIC); struct tipc_msg *msg; if (buf != NULL) { From 3e96dac7c956089d3f23aca98c4dfca57b6aaf8a Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 11 Jan 2017 15:00:47 +0900 Subject: [PATCH 491/645] perf probe: Add error checks to offline probe post-processing Add error check codes on post processing and improve it for offline probe events as: - post processing fails if no matched symbol found in map(-ENOENT) or strdup() failed(-ENOMEM). - Even if the symbol name is the same, it updates symbol address and offset. Signed-off-by: Masami Hiramatsu Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-event.c | 50 +++++++++++++++++++++++------------ 1 file changed, 33 insertions(+), 17 deletions(-) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index 4a57c8a60bd9..aa8a9227080a 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -610,6 +610,33 @@ error: return ret ? : -ENOENT; } +/* Adjust symbol name and address */ +static int post_process_probe_trace_point(struct probe_trace_point *tp, + struct map *map, unsigned long offs) +{ + struct symbol *sym; + u64 addr = tp->address + tp->offset - offs; + + sym = map__find_symbol(map, addr); + if (!sym) + return -ENOENT; + + if (strcmp(sym->name, tp->symbol)) { + /* If we have no realname, use symbol for it */ + if (!tp->realname) + tp->realname = tp->symbol; + else + free(tp->symbol); + tp->symbol = strdup(sym->name); + if (!tp->symbol) + return -ENOMEM; + } + tp->offset = addr - sym->start; + tp->address -= offs; + + return 0; +} + /* * Rename DWARF symbols to ELF symbols -- gcc sometimes optimizes functions * and generate new symbols with suffixes such as .constprop.N or .isra.N @@ -622,11 +649,9 @@ static int post_process_offline_probe_trace_events(struct probe_trace_event *tevs, int ntevs, const char *pathname) { - struct symbol *sym; struct map *map; unsigned long stext = 0; - u64 addr; - int i; + int i, ret = 0; /* Prepare a map for offline binary */ map = dso__new_map(pathname); @@ -636,23 +661,14 @@ post_process_offline_probe_trace_events(struct probe_trace_event *tevs, } for (i = 0; i < ntevs; i++) { - addr = tevs[i].point.address + tevs[i].point.offset - stext; - sym = map__find_symbol(map, addr); - if (!sym) - continue; - if (!strcmp(sym->name, tevs[i].point.symbol)) - continue; - /* If we have no realname, use symbol for it */ - if (!tevs[i].point.realname) - tevs[i].point.realname = tevs[i].point.symbol; - else - free(tevs[i].point.symbol); - tevs[i].point.symbol = strdup(sym->name); - tevs[i].point.offset = addr - sym->start; + ret = post_process_probe_trace_point(&tevs[i].point, + map, stext); + if (ret < 0) + break; } map__put(map); - return 0; + return ret; } static int add_exec_to_probe_trace_events(struct probe_trace_event *tevs, From 613f050d68a8ed3c0b18b9568698908ef7bbc1f7 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 11 Jan 2017 15:01:57 +0900 Subject: [PATCH 492/645] perf probe: Fix to probe on gcc generated functions in modules Fix to probe on gcc generated functions on modules. Since probing on a module is based on its symbol name, it should be adjusted on actual symbols. E.g. without this fix, perf probe shows probe definition on non-exist symbol as below. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range* in_range.isra.12 $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range+0 With this fix, perf probe correctly shows a probe on gcc-generated symbol. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range.isra.12+0 This also fixes same problem on online module as below. $ perf probe -m i915 -D assert_plane p:probe/assert_plane i915:assert_plane.constprop.134+0 Signed-off-by: Masami Hiramatsu Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/probe-event.c | 45 ++++++++++++++++++++++------------ tools/perf/util/probe-finder.c | 7 ++++-- tools/perf/util/probe-finder.h | 3 +++ 3 files changed, 37 insertions(+), 18 deletions(-) diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c index aa8a9227080a..6a6f44dd594b 100644 --- a/tools/perf/util/probe-event.c +++ b/tools/perf/util/probe-event.c @@ -698,18 +698,31 @@ static int add_exec_to_probe_trace_events(struct probe_trace_event *tevs, return ret; } -static int add_module_to_probe_trace_events(struct probe_trace_event *tevs, - int ntevs, const char *module) +static int +post_process_module_probe_trace_events(struct probe_trace_event *tevs, + int ntevs, const char *module, + struct debuginfo *dinfo) { + Dwarf_Addr text_offs = 0; int i, ret = 0; char *mod_name = NULL; + struct map *map; if (!module) return 0; - mod_name = find_module_name(module); + map = get_target_map(module, false); + if (!map || debuginfo__get_text_offset(dinfo, &text_offs, true) < 0) { + pr_warning("Failed to get ELF symbols for %s\n", module); + return -EINVAL; + } + mod_name = find_module_name(module); for (i = 0; i < ntevs; i++) { + ret = post_process_probe_trace_point(&tevs[i].point, + map, (unsigned long)text_offs); + if (ret < 0) + break; tevs[i].point.module = strdup(mod_name ? mod_name : module); if (!tevs[i].point.module) { @@ -719,6 +732,8 @@ static int add_module_to_probe_trace_events(struct probe_trace_event *tevs, } free(mod_name); + map__put(map); + return ret; } @@ -776,7 +791,7 @@ arch__post_process_probe_trace_events(struct perf_probe_event *pev __maybe_unuse static int post_process_probe_trace_events(struct perf_probe_event *pev, struct probe_trace_event *tevs, int ntevs, const char *module, - bool uprobe) + bool uprobe, struct debuginfo *dinfo) { int ret; @@ -784,7 +799,8 @@ static int post_process_probe_trace_events(struct perf_probe_event *pev, ret = add_exec_to_probe_trace_events(tevs, ntevs, module); else if (module) /* Currently ref_reloc_sym based probe is not for drivers */ - ret = add_module_to_probe_trace_events(tevs, ntevs, module); + ret = post_process_module_probe_trace_events(tevs, ntevs, + module, dinfo); else ret = post_process_kernel_probe_trace_events(tevs, ntevs); @@ -828,30 +844,27 @@ static int try_to_find_probe_trace_events(struct perf_probe_event *pev, } } - debuginfo__delete(dinfo); - if (ntevs > 0) { /* Succeeded to find trace events */ pr_debug("Found %d probe_trace_events.\n", ntevs); ret = post_process_probe_trace_events(pev, *tevs, ntevs, - pev->target, pev->uprobes); + pev->target, pev->uprobes, dinfo); if (ret < 0 || ret == ntevs) { + pr_debug("Post processing failed or all events are skipped. (%d)\n", ret); clear_probe_trace_events(*tevs, ntevs); zfree(tevs); + ntevs = 0; } - if (ret != ntevs) - return ret < 0 ? ret : ntevs; - ntevs = 0; - /* Fall through */ } + debuginfo__delete(dinfo); + if (ntevs == 0) { /* No error but failed to find probe point. */ pr_warning("Probe point '%s' not found.\n", synthesize_perf_probe_point(&pev->point)); return -ENOENT; - } - /* Error path : ntevs < 0 */ - pr_debug("An error occurred in debuginfo analysis (%d).\n", ntevs); - if (ntevs < 0) { + } else if (ntevs < 0) { + /* Error path : ntevs < 0 */ + pr_debug("An error occurred in debuginfo analysis (%d).\n", ntevs); if (ntevs == -EBADF) pr_warning("Warning: No dwarf info found in the vmlinux - " "please rebuild kernel with CONFIG_DEBUG_INFO=y.\n"); diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 0278fe1a4cc6..0d9d6e0803b8 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -1501,7 +1501,8 @@ int debuginfo__find_available_vars_at(struct debuginfo *dbg, } /* For the kernel module, we need a special code to get a DIE */ -static int debuginfo__get_text_offset(struct debuginfo *dbg, Dwarf_Addr *offs) +int debuginfo__get_text_offset(struct debuginfo *dbg, Dwarf_Addr *offs, + bool adjust_offset) { int n, i; Elf32_Word shndx; @@ -1530,6 +1531,8 @@ static int debuginfo__get_text_offset(struct debuginfo *dbg, Dwarf_Addr *offs) if (!shdr) return -ENOENT; *offs = shdr->sh_addr; + if (adjust_offset) + *offs -= shdr->sh_offset; } } return 0; @@ -1545,7 +1548,7 @@ int debuginfo__find_probe_point(struct debuginfo *dbg, unsigned long addr, int baseline = 0, lineno = 0, ret = 0; /* We always need to relocate the address for aranges */ - if (debuginfo__get_text_offset(dbg, &baseaddr) == 0) + if (debuginfo__get_text_offset(dbg, &baseaddr, false) == 0) addr += baseaddr; /* Find cu die */ if (!dwarf_addrdie(dbg->dbg, (Dwarf_Addr)addr, &cudie)) { diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h index f1d8558f498e..2956c5198652 100644 --- a/tools/perf/util/probe-finder.h +++ b/tools/perf/util/probe-finder.h @@ -46,6 +46,9 @@ int debuginfo__find_trace_events(struct debuginfo *dbg, int debuginfo__find_probe_point(struct debuginfo *dbg, unsigned long addr, struct perf_probe_point *ppt); +int debuginfo__get_text_offset(struct debuginfo *dbg, Dwarf_Addr *offs, + bool adjust_offset); + /* Find a line range */ int debuginfo__find_line_range(struct debuginfo *dbg, struct line_range *lr); From f1f7714ea51c56b7163fb1a5acf39c6a204dd758 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 13 Jan 2017 23:38:15 +0100 Subject: [PATCH 493/645] bpf: rework prog_digest into prog_tag Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Cc: Andy Lutomirski Signed-off-by: David S. Miller --- include/linux/bpf.h | 2 +- include/linux/filter.h | 6 ++++-- include/uapi/linux/pkt_cls.h | 2 +- include/uapi/linux/tc_act/tc_bpf.h | 2 +- kernel/bpf/core.c | 14 ++++++++------ kernel/bpf/syscall.c | 8 ++++---- kernel/bpf/verifier.c | 2 +- net/sched/act_bpf.c | 5 ++--- net/sched/cls_bpf.c | 4 ++-- 9 files changed, 24 insertions(+), 21 deletions(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index f74ae68086dc..05cf951df3fe 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -216,7 +216,7 @@ u64 bpf_tail_call(u64 ctx, u64 r2, u64 index, u64 r4, u64 r5); u64 bpf_get_stackid(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5); bool bpf_prog_array_compatible(struct bpf_array *array, const struct bpf_prog *fp); -int bpf_prog_calc_digest(struct bpf_prog *fp); +int bpf_prog_calc_tag(struct bpf_prog *fp); const struct bpf_func_proto *bpf_get_trace_printk_proto(void); diff --git a/include/linux/filter.h b/include/linux/filter.h index a0934e6c9bab..e4eb2546339a 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -57,6 +57,8 @@ struct bpf_prog_aux; /* BPF program can access up to 512 bytes of stack space. */ #define MAX_BPF_STACK 512 +#define BPF_TAG_SIZE 8 + /* Helper macros for filter block array initializers. */ /* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */ @@ -408,7 +410,7 @@ struct bpf_prog { kmemcheck_bitfield_end(meta); enum bpf_prog_type type; /* Type of BPF program */ u32 len; /* Number of filter blocks */ - u32 digest[SHA_DIGEST_WORDS]; /* Program digest */ + u8 tag[BPF_TAG_SIZE]; struct bpf_prog_aux *aux; /* Auxiliary fields */ struct sock_fprog_kern *orig_prog; /* Original BPF program */ unsigned int (*bpf_func)(const void *ctx, @@ -519,7 +521,7 @@ static inline u32 bpf_prog_insn_size(const struct bpf_prog *prog) return prog->len * sizeof(struct bpf_insn); } -static inline u32 bpf_prog_digest_scratch_size(const struct bpf_prog *prog) +static inline u32 bpf_prog_tag_scratch_size(const struct bpf_prog *prog) { return round_up(bpf_prog_insn_size(prog) + sizeof(__be64) + 1, SHA_MESSAGE_BYTES); diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index cb4bcdc58543..a4dcd88ec271 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -397,7 +397,7 @@ enum { TCA_BPF_NAME, TCA_BPF_FLAGS, TCA_BPF_FLAGS_GEN, - TCA_BPF_DIGEST, + TCA_BPF_TAG, __TCA_BPF_MAX, }; diff --git a/include/uapi/linux/tc_act/tc_bpf.h b/include/uapi/linux/tc_act/tc_bpf.h index a6b88a6f7f71..975b50dc8d1d 100644 --- a/include/uapi/linux/tc_act/tc_bpf.h +++ b/include/uapi/linux/tc_act/tc_bpf.h @@ -27,7 +27,7 @@ enum { TCA_ACT_BPF_FD, TCA_ACT_BPF_NAME, TCA_ACT_BPF_PAD, - TCA_ACT_BPF_DIGEST, + TCA_ACT_BPF_TAG, __TCA_ACT_BPF_MAX, }; #define TCA_ACT_BPF_MAX (__TCA_ACT_BPF_MAX - 1) diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 1eb4f1303756..503d4211988a 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -146,10 +146,11 @@ void __bpf_prog_free(struct bpf_prog *fp) vfree(fp); } -int bpf_prog_calc_digest(struct bpf_prog *fp) +int bpf_prog_calc_tag(struct bpf_prog *fp) { const u32 bits_offset = SHA_MESSAGE_BYTES - sizeof(__be64); - u32 raw_size = bpf_prog_digest_scratch_size(fp); + u32 raw_size = bpf_prog_tag_scratch_size(fp); + u32 digest[SHA_DIGEST_WORDS]; u32 ws[SHA_WORKSPACE_WORDS]; u32 i, bsize, psize, blocks; struct bpf_insn *dst; @@ -162,7 +163,7 @@ int bpf_prog_calc_digest(struct bpf_prog *fp) if (!raw) return -ENOMEM; - sha_init(fp->digest); + sha_init(digest); memset(ws, 0, sizeof(ws)); /* We need to take out the map fd for the digest calculation @@ -204,13 +205,14 @@ int bpf_prog_calc_digest(struct bpf_prog *fp) *bits = cpu_to_be64((psize - 1) << 3); while (blocks--) { - sha_transform(fp->digest, todo, ws); + sha_transform(digest, todo, ws); todo += SHA_MESSAGE_BYTES; } - result = (__force __be32 *)fp->digest; + result = (__force __be32 *)digest; for (i = 0; i < SHA_DIGEST_WORDS; i++) - result[i] = cpu_to_be32(fp->digest[i]); + result[i] = cpu_to_be32(digest[i]); + memcpy(fp->tag, result, sizeof(fp->tag)); vfree(raw); return 0; diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index e89acea22ecf..1d6b29e4e2c3 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -688,17 +688,17 @@ static int bpf_prog_release(struct inode *inode, struct file *filp) static void bpf_prog_show_fdinfo(struct seq_file *m, struct file *filp) { const struct bpf_prog *prog = filp->private_data; - char prog_digest[sizeof(prog->digest) * 2 + 1] = { }; + char prog_tag[sizeof(prog->tag) * 2 + 1] = { }; - bin2hex(prog_digest, prog->digest, sizeof(prog->digest)); + bin2hex(prog_tag, prog->tag, sizeof(prog->tag)); seq_printf(m, "prog_type:\t%u\n" "prog_jited:\t%u\n" - "prog_digest:\t%s\n" + "prog_tag:\t%s\n" "memlock:\t%llu\n", prog->type, prog->jited, - prog_digest, + prog_tag, prog->pages * 1ULL << PAGE_SHIFT); } #endif diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 83ed2f8f6f22..cdc43b899f28 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -2936,7 +2936,7 @@ static int replace_map_fd_with_map_ptr(struct bpf_verifier_env *env) int insn_cnt = env->prog->len; int i, j, err; - err = bpf_prog_calc_digest(env->prog); + err = bpf_prog_calc_tag(env->prog); if (err) return err; diff --git a/net/sched/act_bpf.c b/net/sched/act_bpf.c index 1c60317f0121..520baa41cba3 100644 --- a/net/sched/act_bpf.c +++ b/net/sched/act_bpf.c @@ -123,12 +123,11 @@ static int tcf_bpf_dump_ebpf_info(const struct tcf_bpf *prog, nla_put_string(skb, TCA_ACT_BPF_NAME, prog->bpf_name)) return -EMSGSIZE; - nla = nla_reserve(skb, TCA_ACT_BPF_DIGEST, - sizeof(prog->filter->digest)); + nla = nla_reserve(skb, TCA_ACT_BPF_TAG, sizeof(prog->filter->tag)); if (nla == NULL) return -EMSGSIZE; - memcpy(nla_data(nla), prog->filter->digest, nla_len(nla)); + memcpy(nla_data(nla), prog->filter->tag, nla_len(nla)); return 0; } diff --git a/net/sched/cls_bpf.c b/net/sched/cls_bpf.c index adc776048d1a..d9c97018317d 100644 --- a/net/sched/cls_bpf.c +++ b/net/sched/cls_bpf.c @@ -555,11 +555,11 @@ static int cls_bpf_dump_ebpf_info(const struct cls_bpf_prog *prog, nla_put_string(skb, TCA_BPF_NAME, prog->bpf_name)) return -EMSGSIZE; - nla = nla_reserve(skb, TCA_BPF_DIGEST, sizeof(prog->filter->digest)); + nla = nla_reserve(skb, TCA_BPF_TAG, sizeof(prog->filter->tag)); if (nla == NULL) return -EMSGSIZE; - memcpy(nla_data(nla), prog->filter->digest, nla_len(nla)); + memcpy(nla_data(nla), prog->filter->tag, nla_len(nla)); return 0; } From 8a367e74c0120ef68c8c70d5a025648c96626dff Mon Sep 17 00:00:00 2001 From: Basil Gunn Date: Sat, 14 Jan 2017 12:18:55 -0800 Subject: [PATCH 494/645] ax25: Fix segfault after sock connection timeout The ax.25 socket connection timed out & the sock struct has been previously taken down ie. sock struct is now a NULL pointer. Checking the sock_flag causes the segfault. Check if the socket struct pointer is NULL before checking sock_flag. This segfault is seen in timed out netrom connections. Please submit to -stable. Signed-off-by: Basil Gunn Signed-off-by: David S. Miller --- net/ax25/ax25_subr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c index 4855d18a8511..038b109b2be7 100644 --- a/net/ax25/ax25_subr.c +++ b/net/ax25/ax25_subr.c @@ -264,7 +264,7 @@ void ax25_disconnect(ax25_cb *ax25, int reason) { ax25_clear_queues(ax25); - if (!sock_flag(ax25->sk, SOCK_DESTROY)) + if (!ax25->sk || !sock_flag(ax25->sk, SOCK_DESTROY)) ax25_stop_heartbeat(ax25); ax25_stop_t1timer(ax25); ax25_stop_t2timer(ax25); From abeffce90c7f6ce74de9794ad0977a168edf8ef6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 15 Jan 2017 19:50:46 +0200 Subject: [PATCH 495/645] net/mlx5e: Fix a -Wmaybe-uninitialized warning As found by Olof's build bot, we gain a harmless warning about a potential uninitialized variable reference in mlx5: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair that gcc is unfortunately unable to completely figure out. The problem being gcc cannot tell that if(IS_ERR()) in mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later, so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'. The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect by gcc, so it can't get that wrong, so it no longer warns. Hadar Hen Zion already attempted to fix the warning earlier by adding fake initializations, but that ended up not fully addressing all warnings, so I'm reverting it now that it is no longer needed. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/ Fixes: a42485eb0ee4 ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes") Fixes: a757d108dc1a ("net/mlx5e: Fix kbuild warnings for uninitialized parameters") Signed-off-by: Arnd Bergmann Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 118cea5e5489..46bef6a26a8c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -668,9 +668,12 @@ static int mlx5e_route_lookup_ipv4(struct mlx5e_priv *priv, int ttl; #if IS_ENABLED(CONFIG_INET) + int ret; + rt = ip_route_output_key(dev_net(mirred_dev), fl4); - if (IS_ERR(rt)) - return PTR_ERR(rt); + ret = PTR_ERR_OR_ZERO(rt); + if (ret) + return ret; #else return -EOPNOTSUPP; #endif @@ -741,8 +744,8 @@ static int mlx5e_create_encap_header_ipv4(struct mlx5e_priv *priv, struct flowi4 fl4 = {}; char *encap_header; int encap_size; - __be32 saddr = 0; - int ttl = 0; + __be32 saddr; + int ttl; int err; encap_header = kzalloc(max_encap_size, GFP_KERNEL); From b618ab4561d40664492cf9f9507f19a1c8272970 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 15 Jan 2017 19:19:00 +0100 Subject: [PATCH 496/645] net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered Don't use netdev_info and friends before the net_device is registered. This avoids ugly messages like "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer" Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a276a32d57f2..e3f6389e1b01 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3326,9 +3326,9 @@ int stmmac_dvr_probe(struct device *device, (priv->plat->maxmtu >= ndev->min_mtu)) ndev->max_mtu = priv->plat->maxmtu; else if (priv->plat->maxmtu < ndev->min_mtu) - netdev_warn(priv->dev, - "%s: warning: maxmtu having invalid value (%d)\n", - __func__, priv->plat->maxmtu); + dev_warn(priv->device, + "%s: warning: maxmtu having invalid value (%d)\n", + __func__, priv->plat->maxmtu); if (flow_ctrl) priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ @@ -3340,7 +3340,8 @@ int stmmac_dvr_probe(struct device *device, */ if ((priv->synopsys_id >= DWMAC_CORE_3_50) && (!priv->plat->riwt_off)) { priv->use_riwt = 1; - netdev_info(priv->dev, "Enable RX Mitigation via HW Watchdog Timer\n"); + dev_info(priv->device, + "Enable RX Mitigation via HW Watchdog Timer\n"); } netif_napi_add(ndev, &priv->napi, stmmac_poll, 64); @@ -3366,17 +3367,17 @@ int stmmac_dvr_probe(struct device *device, /* MDIO bus Registration */ ret = stmmac_mdio_register(ndev); if (ret < 0) { - netdev_err(priv->dev, - "%s: MDIO bus (id: %d) registration failed", - __func__, priv->plat->bus_id); + dev_err(priv->device, + "%s: MDIO bus (id: %d) registration failed", + __func__, priv->plat->bus_id); goto error_mdio_register; } } ret = register_netdev(ndev); if (ret) { - netdev_err(priv->dev, "%s: ERROR %i registering the device\n", - __func__, ret); + dev_err(priv->device, "%s: ERROR %i registering the device\n", + __func__, ret); goto error_netdev_register; } From 291c566a28910614ce42d0ffe82196eddd6346f4 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 16 Jan 2017 18:31:37 +0200 Subject: [PATCH 497/645] net/mlx4_core: Fix racy CQ (Completion Queue) free In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5cf17b ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Jack Morgenstein Signed-off-by: Matan Barak Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cq.c | 38 +++++++++++++------------ 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c index a849da92f857..6b8635378f1f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/cq.c @@ -101,13 +101,19 @@ void mlx4_cq_completion(struct mlx4_dev *dev, u32 cqn) { struct mlx4_cq *cq; + rcu_read_lock(); cq = radix_tree_lookup(&mlx4_priv(dev)->cq_table.tree, cqn & (dev->caps.num_cqs - 1)); + rcu_read_unlock(); + if (!cq) { mlx4_dbg(dev, "Completion event for bogus CQ %08x\n", cqn); return; } + /* Acessing the CQ outside of rcu_read_lock is safe, because + * the CQ is freed only after interrupt handling is completed. + */ ++cq->arm_sn; cq->comp(cq); @@ -118,23 +124,19 @@ void mlx4_cq_event(struct mlx4_dev *dev, u32 cqn, int event_type) struct mlx4_cq_table *cq_table = &mlx4_priv(dev)->cq_table; struct mlx4_cq *cq; - spin_lock(&cq_table->lock); - + rcu_read_lock(); cq = radix_tree_lookup(&cq_table->tree, cqn & (dev->caps.num_cqs - 1)); - if (cq) - atomic_inc(&cq->refcount); - - spin_unlock(&cq_table->lock); + rcu_read_unlock(); if (!cq) { - mlx4_warn(dev, "Async event for bogus CQ %08x\n", cqn); + mlx4_dbg(dev, "Async event for bogus CQ %08x\n", cqn); return; } + /* Acessing the CQ outside of rcu_read_lock is safe, because + * the CQ is freed only after interrupt handling is completed. + */ cq->event(cq, event_type); - - if (atomic_dec_and_test(&cq->refcount)) - complete(&cq->free); } static int mlx4_SW2HW_CQ(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox, @@ -301,9 +303,9 @@ int mlx4_cq_alloc(struct mlx4_dev *dev, int nent, if (err) return err; - spin_lock_irq(&cq_table->lock); + spin_lock(&cq_table->lock); err = radix_tree_insert(&cq_table->tree, cq->cqn, cq); - spin_unlock_irq(&cq_table->lock); + spin_unlock(&cq_table->lock); if (err) goto err_icm; @@ -349,9 +351,9 @@ int mlx4_cq_alloc(struct mlx4_dev *dev, int nent, return 0; err_radix: - spin_lock_irq(&cq_table->lock); + spin_lock(&cq_table->lock); radix_tree_delete(&cq_table->tree, cq->cqn); - spin_unlock_irq(&cq_table->lock); + spin_unlock(&cq_table->lock); err_icm: mlx4_cq_free_icm(dev, cq->cqn); @@ -370,15 +372,15 @@ void mlx4_cq_free(struct mlx4_dev *dev, struct mlx4_cq *cq) if (err) mlx4_warn(dev, "HW2SW_CQ failed (%d) for CQN %06x\n", err, cq->cqn); + spin_lock(&cq_table->lock); + radix_tree_delete(&cq_table->tree, cq->cqn); + spin_unlock(&cq_table->lock); + synchronize_irq(priv->eq_table.eq[MLX4_CQ_TO_EQ_VECTOR(cq->vector)].irq); if (priv->eq_table.eq[MLX4_CQ_TO_EQ_VECTOR(cq->vector)].irq != priv->eq_table.eq[MLX4_EQ_ASYNC].irq) synchronize_irq(priv->eq_table.eq[MLX4_EQ_ASYNC].irq); - spin_lock_irq(&cq_table->lock); - radix_tree_delete(&cq_table->tree, cq->cqn); - spin_unlock_irq(&cq_table->lock); - if (atomic_dec_and_test(&cq->refcount)) complete(&cq->free); wait_for_completion(&cq->free); From 7c3945bc2073554bb2ecf983e073dee686679c53 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 16 Jan 2017 18:31:38 +0200 Subject: [PATCH 498/645] net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf42cd ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 56185a0b827d..1822382212ee 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2980,6 +2980,9 @@ int mlx4_RST2INIT_QP_wrapper(struct mlx4_dev *dev, int slave, put_res(dev, slave, srqn, RES_SRQ); qp->srq = srq; } + + /* Save param3 for dynamic changes from VST back to VGT */ + qp->param3 = qpc->param3; put_res(dev, slave, rcqn, RES_CQ); put_res(dev, slave, mtt_base, RES_MTT); res_end_move(dev, slave, RES_QP, qpn); @@ -3772,7 +3775,6 @@ int mlx4_INIT2RTR_QP_wrapper(struct mlx4_dev *dev, int slave, int qpn = vhcr->in_modifier & 0x7fffff; struct res_qp *qp; u8 orig_sched_queue; - __be32 orig_param3 = qpc->param3; u8 orig_vlan_control = qpc->pri_path.vlan_control; u8 orig_fvl_rx = qpc->pri_path.fvl_rx; u8 orig_pri_path_fl = qpc->pri_path.fl; @@ -3814,7 +3816,6 @@ out: */ if (!err) { qp->sched_queue = orig_sched_queue; - qp->param3 = orig_param3; qp->vlan_control = orig_vlan_control; qp->fvl_rx = orig_fvl_rx; qp->pri_path_fl = orig_pri_path_fl; From 9577b174cd0323d287c994ef0891db71666d0765 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 16 Jan 2017 18:31:39 +0200 Subject: [PATCH 499/645] net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420f9d2 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9cb50d ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/eq.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index cd3638e6fe25..0509996957d9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -554,8 +554,9 @@ static int mlx4_eq_int(struct mlx4_dev *dev, struct mlx4_eq *eq) break; case MLX4_EVENT_TYPE_SRQ_LIMIT: - mlx4_dbg(dev, "%s: MLX4_EVENT_TYPE_SRQ_LIMIT\n", - __func__); + mlx4_dbg(dev, "%s: MLX4_EVENT_TYPE_SRQ_LIMIT. srq_no=0x%x, eq 0x%x\n", + __func__, be32_to_cpu(eqe->event.srq.srqn), + eq->eqn); case MLX4_EVENT_TYPE_SRQ_CATAS_ERROR: if (mlx4_is_master(dev)) { /* forward only to slave owning the SRQ */ @@ -570,15 +571,19 @@ static int mlx4_eq_int(struct mlx4_dev *dev, struct mlx4_eq *eq) eq->eqn, eq->cons_index, ret); break; } - mlx4_warn(dev, "%s: slave:%d, srq_no:0x%x, event: %02x(%02x)\n", - __func__, slave, - be32_to_cpu(eqe->event.srq.srqn), - eqe->type, eqe->subtype); + if (eqe->type == + MLX4_EVENT_TYPE_SRQ_CATAS_ERROR) + mlx4_warn(dev, "%s: slave:%d, srq_no:0x%x, event: %02x(%02x)\n", + __func__, slave, + be32_to_cpu(eqe->event.srq.srqn), + eqe->type, eqe->subtype); if (!ret && slave != dev->caps.function) { - mlx4_warn(dev, "%s: sending event %02x(%02x) to slave:%d\n", - __func__, eqe->type, - eqe->subtype, slave); + if (eqe->type == + MLX4_EVENT_TYPE_SRQ_CATAS_ERROR) + mlx4_warn(dev, "%s: sending event %02x(%02x) to slave:%d\n", + __func__, eqe->type, + eqe->subtype, slave); mlx4_slave_event(dev, slave, eqe); break; } From 67d35e70af9cabb663c827e03bc5c1e89b43db72 Mon Sep 17 00:00:00 2001 From: Fam Zheng Date: Fri, 13 Jan 2017 11:40:01 +0800 Subject: [PATCH 500/645] scsi: libfc: Fix variable name in fc_set_wwpn The parameter name should be wwpn instead of wwnn. Signed-off-by: Fam Zheng Acked-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- include/scsi/libfc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 96dd0b3f70d7..da5033dd8cbc 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -809,11 +809,11 @@ static inline void fc_set_wwnn(struct fc_lport *lport, u64 wwnn) /** * fc_set_wwpn() - Set the World Wide Port Name of a local port * @lport: The local port whose WWPN is to be set - * @wwnn: The new WWPN + * @wwpn: The new WWPN */ -static inline void fc_set_wwpn(struct fc_lport *lport, u64 wwnn) +static inline void fc_set_wwpn(struct fc_lport *lport, u64 wwpn) { - lport->wwpn = wwnn; + lport->wwpn = wwpn; } /** From 32b53c012e0bfe20b2745962a89db0dc72ef3270 Mon Sep 17 00:00:00 2001 From: Reza Arbab Date: Tue, 3 Jan 2017 14:39:51 -0600 Subject: [PATCH 501/645] powerpc/mm: Fix memory hotplug BUG() on radix Memory hotplug is leading to hash page table calls, even on radix: arch_add_memory create_section_mapping htab_bolt_mapping BUG_ON(!ppc_md.hpte_insert); To fix, refactor {create,remove}_section_mapping() into hash__ and radix__ variants. Leave the radix versions stubbed for now. Reviewed-by: Aneesh Kumar K.V Acked-by: Balbir Singh Signed-off-by: Reza Arbab Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/book3s/64/hash.h | 4 ++++ arch/powerpc/mm/hash_utils_64.c | 4 ++-- arch/powerpc/mm/pgtable-book3s64.c | 18 ++++++++++++++++++ 3 files changed, 24 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h index f61cad3de4e6..4c935f7504f7 100644 --- a/arch/powerpc/include/asm/book3s/64/hash.h +++ b/arch/powerpc/include/asm/book3s/64/hash.h @@ -201,6 +201,10 @@ extern int __meminit hash__vmemmap_create_mapping(unsigned long start, unsigned long phys); extern void hash__vmemmap_remove_mapping(unsigned long start, unsigned long page_size); + +int hash__create_section_mapping(unsigned long start, unsigned long end); +int hash__remove_section_mapping(unsigned long start, unsigned long end); + #endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_BOOK3S_64_HASH_H */ diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 80334937e14f..67e19a0821be 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -747,7 +747,7 @@ static unsigned long __init htab_get_table_size(void) } #ifdef CONFIG_MEMORY_HOTPLUG -int create_section_mapping(unsigned long start, unsigned long end) +int hash__create_section_mapping(unsigned long start, unsigned long end) { int rc = htab_bolt_mapping(start, end, __pa(start), pgprot_val(PAGE_KERNEL), mmu_linear_psize, @@ -761,7 +761,7 @@ int create_section_mapping(unsigned long start, unsigned long end) return rc; } -int remove_section_mapping(unsigned long start, unsigned long end) +int hash__remove_section_mapping(unsigned long start, unsigned long end) { int rc = htab_remove_mapping(start, end, mmu_linear_psize, mmu_kernel_ssize); diff --git a/arch/powerpc/mm/pgtable-book3s64.c b/arch/powerpc/mm/pgtable-book3s64.c index ebf9782bacf9..653ff6c74ebe 100644 --- a/arch/powerpc/mm/pgtable-book3s64.c +++ b/arch/powerpc/mm/pgtable-book3s64.c @@ -126,3 +126,21 @@ void mmu_cleanup_all(void) else if (mmu_hash_ops.hpte_clear_all) mmu_hash_ops.hpte_clear_all(); } + +#ifdef CONFIG_MEMORY_HOTPLUG +int create_section_mapping(unsigned long start, unsigned long end) +{ + if (radix_enabled()) + return -ENODEV; + + return hash__create_section_mapping(start, end); +} + +int remove_section_mapping(unsigned long start, unsigned long end) +{ + if (radix_enabled()) + return -ENODEV; + + return hash__remove_section_mapping(start, end); +} +#endif /* CONFIG_MEMORY_HOTPLUG */ From 0faa9cb5b3836a979864a6357e01d2046884ad52 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Sun, 15 Jan 2017 10:14:06 -0500 Subject: [PATCH 502/645] net sched actions: fix refcnt when GETing of action after bind Demonstrating the issue: .. add a drop action $sudo $TC actions add action drop index 10 .. retrieve it $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 29 sec used 29 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... bug 1 above: reference is two. Reference is actually 1 but we forget to subtract 1. ... do a GET again and we see the same issue try a few times and nothing changes ~$ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 31 sec used 31 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... lets try to bind the action to a filter.. $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 ... and now a few GETs: $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 3 bind 1 installed 204 sec used 204 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 4 bind 1 installed 206 sec used 206 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 5 bind 1 installed 235 sec used 235 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 .... as can be observed the reference count keeps going up. After the fix $ sudo $TC actions add action drop index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 4 sec used 4 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 6 sec used 6 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 32 sec used 32 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 33 sec used 33 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Fixes: aecc5cefc389 ("net sched actions: fix GETing actions") Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- net/sched/act_api.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/sched/act_api.c b/net/sched/act_api.c index 2095c83ce773..e10456ef6f7a 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -900,8 +900,6 @@ tca_action_gd(struct net *net, struct nlattr *nla, struct nlmsghdr *n, goto err; } act->order = i; - if (event == RTM_GETACTION) - act->tcfa_refcnt++; list_add_tail(&act->list, &actions); } @@ -914,7 +912,8 @@ tca_action_gd(struct net *net, struct nlattr *nla, struct nlmsghdr *n, return ret; } err: - tcf_action_destroy(&actions, 0); + if (event != RTM_GETACTION) + tcf_action_destroy(&actions, 0); return ret; } From 9728a7c8ab2f7a1c8d5c95278d2e4f4ac1285385 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 16 Jan 2017 11:58:53 -0600 Subject: [PATCH 503/645] powerpc/icp-opal: Fix missing KVM case and harden replay The icp-opal call is missing the code from icp-native to recover interrupts snatched by KVM. Without that, when running KVM, we can get into a situation where an interrupt is lost and the CPU stuck with an elevated CPPR. Also harden replay by always checking the return from opal_int_eoi(). Fixes: d74361881f0d ("powerpc/xics: Add ICP OPAL backend") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman --- arch/powerpc/sysdev/xics/icp-opal.c | 31 ++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c index d38e86fd5720..60c57657c772 100644 --- a/arch/powerpc/sysdev/xics/icp-opal.c +++ b/arch/powerpc/sysdev/xics/icp-opal.c @@ -20,6 +20,7 @@ #include #include #include +#include static void icp_opal_teardown_cpu(void) { @@ -39,7 +40,26 @@ static void icp_opal_flush_ipi(void) * Should we be flagging idle loop instead? * Or creating some task to be scheduled? */ - opal_int_eoi((0x00 << 24) | XICS_IPI); + if (opal_int_eoi((0x00 << 24) | XICS_IPI) > 0) + force_external_irq_replay(); +} + +static unsigned int icp_opal_get_xirr(void) +{ + unsigned int kvm_xirr; + __be32 hw_xirr; + int64_t rc; + + /* Handle an interrupt latched by KVM first */ + kvm_xirr = kvmppc_get_xics_latch(); + if (kvm_xirr) + return kvm_xirr; + + /* Then ask OPAL */ + rc = opal_int_get_xirr(&hw_xirr, false); + if (rc < 0) + return 0; + return be32_to_cpu(hw_xirr); } static unsigned int icp_opal_get_irq(void) @@ -47,12 +67,8 @@ static unsigned int icp_opal_get_irq(void) unsigned int xirr; unsigned int vec; unsigned int irq; - int64_t rc; - rc = opal_int_get_xirr(&xirr, false); - if (rc < 0) - return 0; - xirr = be32_to_cpu(xirr); + xirr = icp_opal_get_xirr(); vec = xirr & 0x00ffffff; if (vec == XICS_IRQ_SPURIOUS) return 0; @@ -67,7 +83,8 @@ static unsigned int icp_opal_get_irq(void) xics_mask_unknown_vec(vec); /* We might learn about it later, so EOI it */ - opal_int_eoi(xirr); + if (opal_int_eoi(xirr) > 0) + force_external_irq_replay(); return 0; } From db8318865e2c04dbe3d95089c7215b94a5b879b7 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Thu, 5 Jan 2017 12:37:55 +0800 Subject: [PATCH 504/645] thermal: rockchip: fixes the conversion table As Ayaka reported the thermal was abormal on rk3288 at booting time. thermal thermal_zone1: critical temperature reached(125 C),shutting down thermal thermal_zone2: critical temperature reached(125 C),shutting down thermal thermal_zone1: critical temperature reached(125 C),shutting down thermal thermal_zone2: critical temperature reached(125 C),shutting down ... The root caused by reading the invald analogic value, the value is zero will convert the 125 degree to trigger the critical temperature. Fixes it with insteading of the incorrect reading now. Fixes commit cadf29dc2a8bcaae83 ("thermal: rockchip: optimize the conversion table") Reported-by: ayaka Signed-off-by: Caesar Wang Signed-off-by: Eduardo Valentin --- drivers/thermal/rockchip_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index cbbf0ce2302c..4c7796512453 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -464,7 +464,7 @@ static int rk_tsadcv2_code_to_temp(const struct chip_tsadc_table *table, switch (table->mode) { case ADC_DECREMENT: code &= table->data_mask; - if (code < table->id[high].code) + if (code <= table->id[high].code) return -EAGAIN; /* Incorrect reading */ while (low <= high) { From bc7c36eedb0c7004aa06c2afc3c5385adada8fa3 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Tue, 17 Jan 2017 13:54:36 +0900 Subject: [PATCH 505/645] clocksource/exynos_mct: Clear interrupt when cpu is shut down When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by: Seung-Woo Kim Signed-off-by: Joonyoung Shim Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: stable@vger.kernel.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.com Signed-off-by: Thomas Gleixner --- drivers/clocksource/exynos_mct.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 4da1dc2278bd..670ff0f25b67 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -495,6 +495,7 @@ static int exynos4_mct_dying_cpu(unsigned int cpu) if (mct_int_type == MCT_INT_SPI) { if (evt->irq != -1) disable_irq_nosync(evt->irq); + exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); } else { disable_percpu_irq(mct_irqs[MCT_L0_IRQ]); } From 4e71de7986386d5fd3765458f27d612931f27f5e Mon Sep 17 00:00:00 2001 From: Zhou Chengming Date: Mon, 16 Jan 2017 11:21:11 +0800 Subject: [PATCH 506/645] perf/x86/intel: Handle exclusive threadid correctly on CPU hotplug The CPU hotplug function intel_pmu_cpu_starting() sets cpu_hw_events.excl_thread_id unconditionally to 1 when the shared exclusive counters data structure is already availabe for the sibling thread. This works during the boot process because the first sibling gets threadid 0 assigned and the second sibling which shares the data structure gets 1. But when the first thread of the core is offlined and onlined again it shares the data structure with the second thread and gets exclusive thread id 1 assigned as well. Prevent this by checking the threadid of the already online thread. [ tglx: Rewrote changelog ] Signed-off-by: Zhou Chengming Cc: NuoHan Qiao Cc: ak@linux.intel.com Cc: peterz@infradead.org Cc: kan.liang@intel.com Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: qiaonuohan@huawei.com Cc: davidcc@google.com Cc: guohanjun@huawei.com Link: http://lkml.kernel.org/r/1484536871-3131-1-git-send-email-zhouchengming1@huawei.com Signed-off-by: Thomas Gleixner --- --- arch/x86/events/intel/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- arch/x86/events/intel/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index d611cab214a6..eb1484c86bb4 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -3176,13 +3176,16 @@ static void intel_pmu_cpu_starting(int cpu) if (x86_pmu.flags & PMU_FL_EXCL_CNTRS) { for_each_cpu(i, topology_sibling_cpumask(cpu)) { + struct cpu_hw_events *sibling; struct intel_excl_cntrs *c; - c = per_cpu(cpu_hw_events, i).excl_cntrs; + sibling = &per_cpu(cpu_hw_events, i); + c = sibling->excl_cntrs; if (c && c->core_id == core_id) { cpuc->kfree_on_online[1] = cpuc->excl_cntrs; cpuc->excl_cntrs = c; - cpuc->excl_thread_id = 1; + if (!sibling->excl_thread_id) + cpuc->excl_thread_id = 1; break; } } From 524dabe1c68e0bca25ce7b108099e5d89472a101 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Mon, 16 Jan 2017 12:46:33 +0100 Subject: [PATCH 507/645] arm64: Fix swiotlb fallback allocation Commit b67a8b29df introduced logic to skip swiotlb allocation when all memory is DMA accessible anyway. While this is a great idea, __dma_alloc still calls swiotlb code unconditionally to allocate memory when there is no CMA memory available. The swiotlb code is called to ensure that we at least try get_free_pages(). Without initialization, swiotlb allocation code tries to access io_tlb_list which is NULL. That results in a stack trace like this: Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] [] swiotlb_tbl_map_single+0xd0/0x2b0 [] swiotlb_alloc_coherent+0x10c/0x198 [] __dma_alloc+0x68/0x1a8 [] drm_gem_cma_create+0x98/0x108 [drm] [] drm_fbdev_cma_create_with_funcs+0xbc/0x368 [drm_kms_helper] [] drm_fbdev_cma_create+0x2c/0x40 [drm_kms_helper] [] drm_fb_helper_initial_config+0x238/0x410 [drm_kms_helper] [] drm_fbdev_cma_init_with_funcs+0x98/0x160 [drm_kms_helper] [] drm_fbdev_cma_init+0x40/0x58 [drm_kms_helper] [] vc4_kms_load+0x90/0xf0 [vc4] [] vc4_drm_bind+0xec/0x168 [vc4] [...] Thankfully swiotlb code just learned how to not do allocations with the FORCE_NO option. This patch configures the swiotlb code to use that if we decide not to initialize the swiotlb framework. Fixes: b67a8b29df ("arm64: mm: only initialize swiotlb when necessary") Signed-off-by: Alexander Graf CC: Jisheng Zhang CC: Geert Uytterhoeven CC: Konrad Rzeszutek Wilk Signed-off-by: Catalin Marinas --- arch/arm64/mm/init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 716d1226ba69..380ebe705093 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -404,6 +404,8 @@ void __init mem_init(void) if (swiotlb_force == SWIOTLB_FORCE || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT)) swiotlb_init(1); + else + swiotlb_force = SWIOTLB_NO_FORCE; set_max_mapnr(pfn_to_page(max_pfn) - mem_map); From e8f19746e4b1e8c3118d240dba51f06153a37b07 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 16 Dec 2016 13:32:39 +0000 Subject: [PATCH 508/645] ubifs: ensure zero err is returned on successful return err is no longer being set on a successful return path, causing a garbage value being returned. Fix this by setting err to zero for the successful return path. Found with static analysis by CoverityScan, CID 1389473 Fixes: 7799953b34d18 ("ubifs: Implement encrypt/decrypt for all IO") Signed-off-by: Colin Ian King Signed-off-by: Richard Weinberger --- fs/ubifs/journal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c index a459211a1c21..b75f1a61afe3 100644 --- a/fs/ubifs/journal.c +++ b/fs/ubifs/journal.c @@ -1319,6 +1319,7 @@ static int truncate_data_node(const struct ubifs_info *c, const struct inode *in dn->compr_type = cpu_to_le16(compr_type); dn->size = cpu_to_le32(*new_len); *new_len = UBIFS_DATA_NODE_SZ + out_len; + err = 0; out: kfree(buf); return err; From 507502adf0f415108ef0b87a0acbb84d1839007f Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Wed, 4 Jan 2017 09:38:29 +0100 Subject: [PATCH 509/645] ubifs: fix unencrypted journal write Without this, I get the following on reboot: UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad target node (type 1) length (8240) UBIFS error (ubi1:0 pid 703): ubifs_load_znode: have to be in range of 48-4144 UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad indexing node at LEB 13:11080, error 5 magic 0x6101831 crc 0xb1cb246f node_type 9 (indexing node) group_type 0 (no node group) sqnum 546 len 128 child_cnt 5 level 0 Branches: 0: LEB 14:72088 len 161 key (133, inode) 1: LEB 14:81120 len 160 key (134, inode) 2: LEB 20:26624 len 8240 key (134, data, 0) 3: LEB 14:81280 len 160 key (135, inode) 4: LEB 20:34864 len 8240 key (135, data, 0) UBIFS warning (ubi1:0 pid 703): ubifs_ro_mode.part.0: switched to read-only mode, error -22 CPU: 0 PID: 703 Comm: mount Not tainted 4.9.0-next-20161213+ #1197 Hardware name: Atmel SAMA5 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (ubifs_jnl_update+0x2e8/0x614) [] (ubifs_jnl_update) from [] (ubifs_mkdir+0x160/0x204) [] (ubifs_mkdir) from [] (vfs_mkdir+0xb0/0x104) [] (vfs_mkdir) from [] (ovl_create_real+0x118/0x248) [] (ovl_create_real) from [] (ovl_fill_super+0x994/0xaf4) [] (ovl_fill_super) from [] (mount_nodev+0x44/0x9c) [] (mount_nodev) from [] (mount_fs+0x14/0xa4) [] (mount_fs) from [] (vfs_kern_mount+0x4c/0xd4) [] (vfs_kern_mount) from [] (do_mount+0x154/0xac8) [] (do_mount) from [] (SyS_mount+0x74/0x9c) [] (SyS_mount) from [] (ret_fast_syscall+0x0/0x3c) UBIFS error (ubi1:0 pid 703): ubifs_mkdir: cannot create directory, error -22 overlayfs: failed to create directory /mnt/ovl/work/work (errno: 22); mounting read-only Fixes: 7799953b34d1 ("ubifs: Implement encrypt/decrypt for all IO") Signed-off-by: Peter Rosin Tested-by: Kevin Hilman Signed-off-by: Richard Weinberger --- fs/ubifs/journal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c index b75f1a61afe3..294519b98874 100644 --- a/fs/ubifs/journal.c +++ b/fs/ubifs/journal.c @@ -744,6 +744,7 @@ int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode, } else { data->compr_size = 0; + out_len = compr_len; } dlen = UBIFS_DATA_NODE_SZ + out_len; From 404e0b63312ea294b058b4d5c964d064d321ea32 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 16 Dec 2016 09:42:16 +0100 Subject: [PATCH 510/645] ubifs: add CONFIG_BLOCK dependency for encryption This came up during the v4.10 merge window: warning: (UBIFS_FS_ENCRYPTION) selects FS_ENCRYPTION which has unmet direct dependencies (BLOCK) fs/crypto/crypto.c: In function 'fscrypt_zeroout_range': fs/crypto/crypto.c:355:9: error: implicit declaration of function 'bio_alloc';did you mean 'd_alloc'? [-Werror=implicit-function-declaration] bio = bio_alloc(GFP_NOWAIT, 1); The easiest way out is to limit UBIFS_FS_ENCRYPTION to configurations that also enable BLOCK. Fixes: d475a507457b ("ubifs: Add skeleton for fscrypto") Signed-off-by: Arnd Bergmann Signed-off-by: Richard Weinberger --- fs/ubifs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig index 0a908ae7af13..b0d0623c83ed 100644 --- a/fs/ubifs/Kconfig +++ b/fs/ubifs/Kconfig @@ -53,7 +53,7 @@ config UBIFS_ATIME_SUPPORT config UBIFS_FS_ENCRYPTION bool "UBIFS Encryption" - depends on UBIFS_FS + depends on UBIFS_FS && BLOCK select FS_ENCRYPTION default n help From a75467d910135905de60b3af3f11b3693625781e Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Mon, 19 Dec 2016 11:12:48 -0800 Subject: [PATCH 511/645] ubifs: allow encryption ioctls in compat mode The ubifs encryption ioctls did not work when called by a 32-bit program on a 64-bit kernel. Since 'struct fscrypt_policy' is not affected by the word size, ubifs just needs to allow these ioctls through, like what ext4 and f2fs do. Signed-off-by: Eric Biggers Signed-off-by: Richard Weinberger --- fs/ubifs/ioctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ubifs/ioctl.c b/fs/ubifs/ioctl.c index 78d713644df3..da519ba205f6 100644 --- a/fs/ubifs/ioctl.c +++ b/fs/ubifs/ioctl.c @@ -217,6 +217,9 @@ long ubifs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case FS_IOC32_SETFLAGS: cmd = FS_IOC_SETFLAGS; break; + case FS_IOC_SET_ENCRYPTION_POLICY: + case FS_IOC_GET_ENCRYPTION_POLICY: + break; default: return -ENOIOCTLCMD; } From 3d4b2fcbc980879a1385d5d7d17a4ffd0ee9aa1f Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Mon, 19 Dec 2016 11:15:48 -0800 Subject: [PATCH 512/645] ubifs: remove redundant checks for encryption key In several places, ubifs checked for an encryption key before creating a file in an encrypted directory. This was redundant with fscrypt_setup_filename() or ubifs_new_inode(), and in the case of ubifs_link() it broke linking to special files. So remove the extra checks. Signed-off-by: Eric Biggers Signed-off-by: Richard Weinberger --- fs/ubifs/dir.c | 58 +++----------------------------------------------- 1 file changed, 3 insertions(+), 55 deletions(-) diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 1c5331ac9614..528369f3e472 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -390,16 +390,6 @@ static int do_tmpfile(struct inode *dir, struct dentry *dentry, dbg_gen("dent '%pd', mode %#hx in dir ino %lu", dentry, mode, dir->i_ino); - if (ubifs_crypt_is_encrypted(dir)) { - err = fscrypt_get_encryption_info(dir); - if (err) - return err; - - if (!fscrypt_has_encryption_key(dir)) { - return -EPERM; - } - } - err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm); if (err) return err; @@ -741,17 +731,9 @@ static int ubifs_link(struct dentry *old_dentry, struct inode *dir, ubifs_assert(inode_is_locked(dir)); ubifs_assert(inode_is_locked(inode)); - if (ubifs_crypt_is_encrypted(dir)) { - if (!fscrypt_has_permitted_context(dir, inode)) - return -EPERM; - - err = fscrypt_get_encryption_info(inode); - if (err) - return err; - - if (!fscrypt_has_encryption_key(inode)) - return -EPERM; - } + if (ubifs_crypt_is_encrypted(dir) && + !fscrypt_has_permitted_context(dir, inode)) + return -EPERM; err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm); if (err) @@ -1000,17 +982,6 @@ static int ubifs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode) if (err) return err; - if (ubifs_crypt_is_encrypted(dir)) { - err = fscrypt_get_encryption_info(dir); - if (err) - goto out_budg; - - if (!fscrypt_has_encryption_key(dir)) { - err = -EPERM; - goto out_budg; - } - } - err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm); if (err) goto out_budg; @@ -1096,17 +1067,6 @@ static int ubifs_mknod(struct inode *dir, struct dentry *dentry, return err; } - if (ubifs_crypt_is_encrypted(dir)) { - err = fscrypt_get_encryption_info(dir); - if (err) - goto out_budg; - - if (!fscrypt_has_encryption_key(dir)) { - err = -EPERM; - goto out_budg; - } - } - err = fscrypt_setup_filename(dir, &dentry->d_name, 0, &nm); if (err) goto out_budg; @@ -1231,18 +1191,6 @@ static int ubifs_symlink(struct inode *dir, struct dentry *dentry, goto out_inode; } - err = fscrypt_get_encryption_info(inode); - if (err) { - kfree(sd); - goto out_inode; - } - - if (!fscrypt_has_encryption_key(inode)) { - kfree(sd); - err = -EPERM; - goto out_inode; - } - ostr.name = sd->encrypted_path; ostr.len = disk_link.len; From 1cb51a15b576ee325d527726afff40947218fd5e Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Tue, 10 Jan 2017 11:49:40 +0100 Subject: [PATCH 513/645] ubifs: Fix journal replay wrt. xattr nodes When replaying the journal it can happen that a journal entry points to a garbage collected node. This is the case when a power-cut occurred between a garbage collect run and a commit. In such a case nodes have to be read using the failable read functions to detect whether the found node matches what we expect. One corner case was forgotten, when the journal contains an entry to remove an inode all xattrs have to be removed too. UBIFS models xattr like directory entries, so the TNC code iterates over all xattrs of the inode and removes them too. This code re-uses the functions for walking directories and calls ubifs_tnc_next_ent(). ubifs_tnc_next_ent() expects to be used only after the journal and aborts when a node does not match the expected result. This behavior can render an UBIFS volume unmountable after a power-cut when xattrs are used. Fix this issue by using failable read functions in ubifs_tnc_next_ent() too when replaying the journal. Cc: stable@vger.kernel.org Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Reported-by: Rock Lee Reviewed-by: David Gstir Signed-off-by: Richard Weinberger --- fs/ubifs/tnc.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index 74ae2de949df..709aa098dd46 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -34,6 +34,11 @@ #include #include "ubifs.h" +static int try_read_node(const struct ubifs_info *c, void *buf, int type, + int len, int lnum, int offs); +static int fallible_read_node(struct ubifs_info *c, const union ubifs_key *key, + struct ubifs_zbranch *zbr, void *node); + /* * Returned codes of 'matches_name()' and 'fallible_matches_name()' functions. * @NAME_LESS: name corresponding to the first argument is less than second @@ -402,7 +407,19 @@ static int tnc_read_hashed_node(struct ubifs_info *c, struct ubifs_zbranch *zbr, return 0; } - err = ubifs_tnc_read_node(c, zbr, node); + if (c->replaying) { + err = fallible_read_node(c, &zbr->key, zbr, node); + /* + * When the node was not found, return -ENOENT, 0 otherwise. + * Negative return codes stay as-is. + */ + if (err == 0) + err = -ENOENT; + else if (err == 1) + err = 0; + } else { + err = ubifs_tnc_read_node(c, zbr, node); + } if (err) return err; @@ -2857,7 +2874,11 @@ struct ubifs_dent_node *ubifs_tnc_next_ent(struct ubifs_info *c, if (fname_len(nm) > 0) { if (err) { /* Handle collisions */ - err = resolve_collision(c, key, &znode, &n, nm); + if (c->replaying) + err = fallible_resolve_collision(c, key, &znode, &n, + nm, 0); + else + err = resolve_collision(c, key, &znode, &n, nm); dbg_tnc("rc returned %d, znode %p, n %d", err, znode, n); if (unlikely(err < 0)) From ce2e852ecc9a42e4b8dabb46025cfef63209234a Mon Sep 17 00:00:00 2001 From: Dmitry Vyukov Date: Tue, 17 Jan 2017 14:51:04 +0100 Subject: [PATCH 514/645] KVM: x86: fix fixing of hypercalls MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit emulator_fix_hypercall() replaces hypercall with vmcall instruction, but it does not handle GP exception properly when writes the new instruction. It can return X86EMUL_PROPAGATE_FAULT without setting exception information. This leads to incorrect emulation and triggers WARN_ON(ctxt->exception.vector > 0x1f) in x86_emulate_insn() as discovered by syzkaller fuzzer: WARNING: CPU: 2 PID: 18646 at arch/x86/kvm/emulate.c:5558 Call Trace: warn_slowpath_null+0x2c/0x40 kernel/panic.c:582 x86_emulate_insn+0x16a5/0x4090 arch/x86/kvm/emulate.c:5572 x86_emulate_instruction+0x403/0x1cc0 arch/x86/kvm/x86.c:5618 emulate_instruction arch/x86/include/asm/kvm_host.h:1127 [inline] handle_exception+0x594/0xfd0 arch/x86/kvm/vmx.c:5762 vmx_handle_exit+0x2b7/0x38b0 arch/x86/kvm/vmx.c:8625 vcpu_enter_guest arch/x86/kvm/x86.c:6888 [inline] vcpu_run arch/x86/kvm/x86.c:6947 [inline] Set exception information when write in emulator_fix_hypercall() fails. Signed-off-by: Dmitry Vyukov Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Wanpeng Li Cc: kvm@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by: Radim Krčmář --- arch/x86/kvm/x86.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 57d8a856cdc5..d153be8929a6 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6171,7 +6171,8 @@ static int emulator_fix_hypercall(struct x86_emulate_ctxt *ctxt) kvm_x86_ops->patch_hypercall(vcpu, instruction); - return emulator_write_emulated(ctxt, rip, instruction, 3, NULL); + return emulator_write_emulated(ctxt, rip, instruction, 3, + &ctxt->exception); } static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu) From 4d191b1b63c209e37bf27938ef365244d3c41084 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 17 Jan 2017 14:21:56 +0000 Subject: [PATCH 515/645] PCI/MSI: pci-xgene-msi: Fix CPU hotplug registration handling The conversion to the new hotplug state machine introduced a regression where a successful hotplug registration would be treated as an error, effectively disabling the MSI driver forever. Fix it by doing the proper check on the return value. Fixes: 9c248f8896e6 ("PCI/xgene-msi: Convert to hotplug state machine") Signed-off-by: Marc Zyngier Signed-off-by: Bjorn Helgaas Acked-by: Sebastian Andrzej Siewior Tested-by: Duc Dang CC: Thomas Gleixner CC: stable@vger.kernel.org --- drivers/pci/host/pci-xgene-msi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/host/pci-xgene-msi.c b/drivers/pci/host/pci-xgene-msi.c index 1f38d0836751..f1b633bce525 100644 --- a/drivers/pci/host/pci-xgene-msi.c +++ b/drivers/pci/host/pci-xgene-msi.c @@ -517,7 +517,7 @@ static int xgene_msi_probe(struct platform_device *pdev) rc = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "pci/xgene:online", xgene_msi_hwirq_alloc, NULL); - if (rc) + if (rc < 0) goto err_cpuhp; pci_xgene_online = rc; rc = cpuhp_setup_state(CPUHP_PCI_XGENE_DEAD, "pci/xgene:dead", NULL, From 387b978cb0d12cf3720ecb17e652e0a9991a08e2 Mon Sep 17 00:00:00 2001 From: "Bryant G. Ly" Date: Wed, 11 Jan 2017 13:52:27 -0600 Subject: [PATCH 516/645] ibmvscsis: Fix max transfer length Current code incorrectly calculates the max transfer length, since it is assuming a 4k page table, but ppc64 all run on 64k page tables. Cc: stable@vger.kernel.org Reported-by: Steven Royer Tested-by: Steven Royer Signed-off-by: Bryant G. Ly Signed-off-by: Bart Van Assche --- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c index 8fb5c54c7dd3..9c91e757c2ef 100644 --- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c @@ -46,6 +46,7 @@ #define INITIAL_SRP_LIMIT 800 #define DEFAULT_MAX_SECTORS 256 +#define MAX_TXU 1024 * 1024 static uint max_vdma_size = MAX_H_COPY_RDMA; @@ -1443,7 +1444,7 @@ static long ibmvscsis_adapter_info(struct scsi_info *vscsi, info->mad_version = cpu_to_be32(MAD_VERSION_1); info->os_type = cpu_to_be32(LINUX); memset(&info->port_max_txu[0], 0, sizeof(info->port_max_txu)); - info->port_max_txu[0] = cpu_to_be32(128 * PAGE_SIZE); + info->port_max_txu[0] = cpu_to_be32(MAX_TXU); dma_wmb(); rc = h_copy_rdma(sizeof(*info), vscsi->dds.window[LOCAL].liobn, From a5b0e4062fb225155189e593699bbfcd0597f8b5 Mon Sep 17 00:00:00 2001 From: "Bryant G. Ly" Date: Wed, 11 Jan 2017 13:16:42 -0600 Subject: [PATCH 517/645] ibmvscsis: Fix sleeping in interrupt context Currently, dma_alloc_coherent is being called with a GFP_KERNEL flag which allows it to sleep in an interrupt context, need to change to GFP_ATOMIC. Cc: stable@vger.kernel.org Tested-by: Steven Royer Reviewed-by: Michael Cyr Signed-off-by: Bryant G. Ly Signed-off-by: Bart Van Assche --- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c index 9c91e757c2ef..99b747cedbeb 100644 --- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c @@ -1392,7 +1392,7 @@ static long ibmvscsis_adapter_info(struct scsi_info *vscsi, } info = dma_alloc_coherent(&vscsi->dma_dev->dev, sizeof(*info), &token, - GFP_KERNEL); + GFP_ATOMIC); if (!info) { dev_err(&vscsi->dev, "bad dma_alloc_coherent %p\n", iue->target); @@ -1510,7 +1510,7 @@ static int ibmvscsis_cap_mad(struct scsi_info *vscsi, struct iu_entry *iue) } cap = dma_alloc_coherent(&vscsi->dma_dev->dev, olen, &token, - GFP_KERNEL); + GFP_ATOMIC); if (!cap) { dev_err(&vscsi->dev, "bad dma_alloc_coherent %p\n", iue->target); From 5eb7c0d04f04a667c049fe090a95494a8de2955c Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 1 Jan 2017 20:25:25 -0600 Subject: [PATCH 518/645] taint/module: Fix problems when out-of-kernel driver defines true or false Commit 7fd8329ba502 ("taint/module: Clean up global and module taint flags handling") used the key words true and false as character members of a new struct. These names cause problems when out-of-kernel modules such as VirtualBox include their own definitions of true and false. Fixes: 7fd8329ba502 ("taint/module: Clean up global and module taint flags handling") Signed-off-by: Larry Finger Cc: Petr Mladek Cc: Jessica Yu Cc: Rusty Russell Reported-by: Valdis Kletnieks Reviewed-by: Petr Mladek Acked-by: Rusty Russell Signed-off-by: Jessica Yu --- include/linux/kernel.h | 4 ++-- kernel/module.c | 2 +- kernel/panic.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 56aec84237ad..cb09238f6d32 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -514,8 +514,8 @@ extern enum system_states { #define TAINT_FLAGS_COUNT 16 struct taint_flag { - char true; /* character printed when tainted */ - char false; /* character printed when not tainted */ + char c_true; /* character printed when tainted */ + char c_false; /* character printed when not tainted */ bool module; /* also show as a per-module taint flag */ }; diff --git a/kernel/module.c b/kernel/module.c index 5088784c0cf9..38d4270925d4 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1145,7 +1145,7 @@ static size_t module_flags_taint(struct module *mod, char *buf) for (i = 0; i < TAINT_FLAGS_COUNT; i++) { if (taint_flags[i].module && test_bit(i, &mod->taints)) - buf[l++] = taint_flags[i].true; + buf[l++] = taint_flags[i].c_true; } return l; diff --git a/kernel/panic.c b/kernel/panic.c index c51edaa04fce..901c4fb46002 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -355,7 +355,7 @@ const char *print_tainted(void) for (i = 0; i < TAINT_FLAGS_COUNT; i++) { const struct taint_flag *t = &taint_flags[i]; *s++ = test_bit(i, &tainted_mask) ? - t->true : t->false; + t->c_true : t->c_false; } *s = 0; } else From 9373eba6cfae48911b977d14323032cd5d161aae Mon Sep 17 00:00:00 2001 From: "Ewan D. Milne" Date: Mon, 9 Jan 2017 16:33:36 -0500 Subject: [PATCH 519/645] scsi: ses: Fix SAS device detection in enclosure The call to scsi_is_sas_rphy() needs to be made on the SAS end_device, not on the SCSI device. Fixes: 835831c57e9b ("ses: use scsi_is_sas_rphy instead of is_sas_attached") Signed-off-by: Ewan D. Milne Reviewed-by: Johannes Thumshirn Reviewed-by: James Bottomley Signed-off-by: Martin K. Petersen --- drivers/scsi/ses.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 8c9a35c91705..50adabbb5808 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -587,7 +587,7 @@ static void ses_match_to_enclosure(struct enclosure_device *edev, ses_enclosure_data_process(edev, to_scsi_device(edev->edev.parent), 0); - if (scsi_is_sas_rphy(&sdev->sdev_gendev)) + if (scsi_is_sas_rphy(sdev->sdev_target->dev.parent)) efd.addr = sas_get_address(sdev); if (efd.addr) { From 4633773799940b1b8b3ff98ea05e6c1ef072febd Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 10 Jan 2017 12:54:36 +0100 Subject: [PATCH 520/645] scsi: bfa: fix wrongly initialized variable in bfad_im_bsg_els_ct_request() Commit 01e0e15c8b3b ("scsi: don't use fc_bsg_job::request and fc_bsg_job::reply directly") introduced a typo, which causes that the bsg_request variable in bfad_im_bsg_els_ct_request() is initialized to itself instead of pointing to the bsg job's request. Reported-by: Nicolas Iooss Signed-off-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/bfa/bfad_bsg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index a9a00169ad91..b2e8c0dfc79c 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -3363,7 +3363,7 @@ bfad_im_bsg_els_ct_request(struct bsg_job *job) struct bfad_fcxp *drv_fcxp; struct bfa_fcs_lport_s *fcs_port; struct bfa_fcs_rport_s *fcs_rport; - struct fc_bsg_request *bsg_request = bsg_request; + struct fc_bsg_request *bsg_request = job->request; struct fc_bsg_reply *bsg_reply = job->reply; uint32_t command_type = bsg_request->msgcode; unsigned long flags; From 26f2819772af891dee2843e1f8662c58e5129d5f Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 12 Jan 2017 15:25:10 +0900 Subject: [PATCH 521/645] scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_type Zoned block devices force the use of READ/WRITE(16) commands by setting sdkp->use_16_for_rw and clearing sdkp->use_10_for_rw. This result in DPOFUA always being disabled for these drives as the assumed use of the deprecated READ/WRITE(6) commands only looks at sdkp->use_10_for_rw. Strenghten the test by also checking that sdkp->use_16_for_rw is false. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 1622e23138e0..28713d36050e 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2600,7 +2600,8 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) if (sdp->broken_fua) { sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n"); sdkp->DPOFUA = 0; - } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) { + } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw && + !sdkp->device->use_16_for_rw) { sd_first_printk(KERN_NOTICE, sdkp, "Uses READ/WRITE(6), disabling FUA\n"); sdkp->DPOFUA = 0; From 68af412c7713b55c01ffc4312320abd10ca70e77 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 12 Jan 2017 15:25:11 +0900 Subject: [PATCH 522/645] scsi: sd: Ignore zoned field for host-managed devices There is no good match of the zoned field of the block device characteristics page for host-managed devices. For these devices, the zoning model is derived directly from the device type. So ignore the zoned field for these drives. [mkp: typo] Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 28713d36050e..ebb1ccef7943 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2784,13 +2784,21 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp) queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q); } - sdkp->zoned = (buffer[8] >> 4) & 3; - if (sdkp->zoned == 1) - q->limits.zoned = BLK_ZONED_HA; - else if (sdkp->device->type == TYPE_ZBC) + if (sdkp->device->type == TYPE_ZBC) { + /* Host-managed */ q->limits.zoned = BLK_ZONED_HM; - else - q->limits.zoned = BLK_ZONED_NONE; + } else { + sdkp->zoned = (buffer[8] >> 4) & 3; + if (sdkp->zoned == 1) + /* Host-aware */ + q->limits.zoned = BLK_ZONED_HA; + else + /* + * Treat drive-managed devices as + * regular block devices. + */ + q->limits.zoned = BLK_ZONED_NONE; + } if (blk_queue_is_zoned(q) && sdkp->first_scan) sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n", q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware"); From 8667f515952feefebb3c0f8d9a9266c91b101a46 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 10 Jan 2017 12:05:54 +0100 Subject: [PATCH 523/645] scsi: lpfc: Set elsiocb contexts to NULL after freeing it Set the elsiocb contexts to NULL after freeing as others depend on it. Signed-off-by: Johannes Thumshirn Acked-by: Dick Kennedy Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_els.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 236e4e51d161..7b6bd8ed0d0b 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -3590,12 +3590,14 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) } else { buf_ptr1 = (struct lpfc_dmabuf *) elsiocb->context2; lpfc_els_free_data(phba, buf_ptr1); + elsiocb->context2 = NULL; } } if (elsiocb->context3) { buf_ptr = (struct lpfc_dmabuf *) elsiocb->context3; lpfc_els_free_bpl(phba, buf_ptr); + elsiocb->context3 = NULL; } lpfc_sli_release_iocbq(phba, elsiocb); return 0; From c2a5d94ffd042db6aaee17b767c43502da3bd8f5 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 11 Jan 2017 15:58:58 -0800 Subject: [PATCH 524/645] qla2xxx: Fix indentation This patch avoids that smatch complains about inconsistent indentation. Signed-off-by: Bart Van Assche Acked-by: Himanshu Madhani Cc: Quinn Tran Cc: Christoph Hellwig --- drivers/scsi/qla2xxx/qla_mbx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 2819ceb96041..3f0b592f02bf 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -101,12 +101,12 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) return QLA_FUNCTION_TIMEOUT; } - /* if PCI error, then avoid mbx processing.*/ - if (test_bit(PCI_ERR, &base_vha->dpc_flags)) { + /* if PCI error, then avoid mbx processing.*/ + if (test_bit(PCI_ERR, &base_vha->dpc_flags)) { ql_log(ql_log_warn, vha, 0x1191, "PCI error, exiting.\n"); return QLA_FUNCTION_TIMEOUT; - } + } reg = ha->iobase; io_lock_on = base_vha->flags.init_done; From ca825828a5c797d431f6ec6a83c912787ffbb8af Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 17 Jan 2017 09:34:14 -0800 Subject: [PATCH 525/645] qla2xxx: Declare an array with file scope static This patch avoids that building with W=1 triggers a compiler warning about a missing declaration. Signed-off-by: Bart Van Assche Acked-by: Himanshu Madhani Cc: Quinn Tran Cc: Christoph Hellwig --- drivers/scsi/qla2xxx/qla_mbx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 3f0b592f02bf..b3a9f6a40a44 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -10,7 +10,7 @@ #include #include -struct rom_cmd { +static struct rom_cmd { uint16_t cmd; } rom_cmds[] = { { MBC_LOAD_RAM }, From 61778a1c5a4556da1a1e005d506f89f009031e62 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 11 Jan 2017 11:57:17 -0800 Subject: [PATCH 526/645] qla2xxx: Move two arrays from header files to .c files MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch avoids that building with W=1 triggers compiler warnings similar to the following: drivers/scsi/qla2xxx/qla_nx2.h:538:23: warning: ‘qla8044_reg_tbl’ defined but not used [-Wunused-const-variable=] Signed-off-by: Bart Van Assche Acked-by: Himanshu Madhani Cc: Quinn Tran Cc: Christoph Hellwig --- drivers/scsi/qla2xxx/qla_nx.c | 5 +++++ drivers/scsi/qla2xxx/qla_nx.h | 3 +-- drivers/scsi/qla2xxx/qla_nx2.c | 17 +++++++++++++++++ drivers/scsi/qla2xxx/qla_nx2.h | 17 ----------------- 4 files changed, 23 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 54380b434b30..0a1723cc08cf 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -42,6 +42,11 @@ static int qla82xx_crb_table_initialized; (crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \ QLA82XX_HW_CRB_HUB_AGT_ADR_##name << 20) +const int MD_MIU_TEST_AGT_RDDATA[] = { + 0x410000A8, 0x410000AC, + 0x410000B8, 0x410000BC +}; + static void qla82xx_crb_addr_transform_setup(void) { qla82xx_crb_addr_transform(XDMA); diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h index 6201dce3553b..77624eac95a4 100644 --- a/drivers/scsi/qla2xxx/qla_nx.h +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -1176,8 +1176,7 @@ struct qla82xx_md_entry_queue { #define MD_MIU_TEST_AGT_ADDR_LO 0x41000094 #define MD_MIU_TEST_AGT_ADDR_HI 0x41000098 -static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC, - 0x410000B8, 0x410000BC }; +extern const int MD_MIU_TEST_AGT_RDDATA[4]; #define CRB_NIU_XG_PAUSE_CTL_P0 0x1 #define CRB_NIU_XG_PAUSE_CTL_P1 0x8 diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c index 007192d7bad8..dc1ec9b61027 100644 --- a/drivers/scsi/qla2xxx/qla_nx2.c +++ b/drivers/scsi/qla2xxx/qla_nx2.c @@ -15,6 +15,23 @@ #define TIMEOUT_100_MS 100 +static const uint32_t qla8044_reg_tbl[] = { + QLA8044_PEG_HALT_STATUS1, + QLA8044_PEG_HALT_STATUS2, + QLA8044_PEG_ALIVE_COUNTER, + QLA8044_CRB_DRV_ACTIVE, + QLA8044_CRB_DEV_STATE, + QLA8044_CRB_DRV_STATE, + QLA8044_CRB_DRV_SCRATCH, + QLA8044_CRB_DEV_PART_INFO1, + QLA8044_CRB_IDC_VER_MAJOR, + QLA8044_FW_VER_MAJOR, + QLA8044_FW_VER_MINOR, + QLA8044_FW_VER_SUB, + QLA8044_CMDPEG_STATE, + QLA8044_ASIC_TEMP, +}; + /* 8044 Flash Read/Write functions */ uint32_t qla8044_rd_reg(struct qla_hw_data *ha, ulong addr) diff --git a/drivers/scsi/qla2xxx/qla_nx2.h b/drivers/scsi/qla2xxx/qla_nx2.h index 02fe3c4cdf55..83c1b7e17c80 100644 --- a/drivers/scsi/qla2xxx/qla_nx2.h +++ b/drivers/scsi/qla2xxx/qla_nx2.h @@ -535,23 +535,6 @@ enum qla_regs { #define CRB_CMDPEG_CHECK_RETRY_COUNT 60 #define CRB_CMDPEG_CHECK_DELAY 500 -static const uint32_t qla8044_reg_tbl[] = { - QLA8044_PEG_HALT_STATUS1, - QLA8044_PEG_HALT_STATUS2, - QLA8044_PEG_ALIVE_COUNTER, - QLA8044_CRB_DRV_ACTIVE, - QLA8044_CRB_DEV_STATE, - QLA8044_CRB_DRV_STATE, - QLA8044_CRB_DRV_SCRATCH, - QLA8044_CRB_DEV_PART_INFO1, - QLA8044_CRB_IDC_VER_MAJOR, - QLA8044_FW_VER_MAJOR, - QLA8044_FW_VER_MINOR, - QLA8044_FW_VER_SUB, - QLA8044_CMDPEG_STATE, - QLA8044_ASIC_TEMP, -}; - /* MiniDump Structures */ /* Driver_code is for driver to write some info about the entry From 91f42b33e5b48a956a352ce10da52b77f4277d5f Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 30 Mar 2016 15:25:21 -0700 Subject: [PATCH 527/645] qla2xxx: Avoid that building with W=1 triggers complaints about set-but-not-used variables Remove two set-but-not-used variables and avoid that the compiler warns about a third variable (rc). Signed-off-by: Bart Van Assche Acked-by: Himanshu Madhani Cc: Quinn Tran Cc: Christoph Hellwig --- drivers/scsi/qla2xxx/qla_attr.c | 3 +-- drivers/scsi/qla2xxx/qla_mbx.c | 2 -- drivers/scsi/qla2xxx/qla_target.c | 3 +++ 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 47eb4d545d13..fefff506a08f 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -753,7 +753,6 @@ qla2x00_issue_logo(struct file *filp, struct kobject *kobj, struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj, struct device, kobj))); int type; - int rval = 0; port_id_t did; type = simple_strtol(buf, NULL, 10); @@ -767,7 +766,7 @@ qla2x00_issue_logo(struct file *filp, struct kobject *kobj, ql_log(ql_log_info, vha, 0x70e4, "%s: %d\n", __func__, type); - rval = qla24xx_els_dcmd_iocb(vha, ELS_DCMD_LOGO, did); + qla24xx_els_dcmd_iocb(vha, ELS_DCMD_LOGO, did); return count; } diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index b3a9f6a40a44..34de6d7e5262 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -684,7 +684,6 @@ qla_set_exlogin_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; struct qla_hw_data *ha = vha->hw; - int configured_count; ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x111a, "Entered %s.\n", __func__); @@ -707,7 +706,6 @@ qla_set_exlogin_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr) /*EMPTY*/ ql_dbg(ql_dbg_mbx, vha, 0x111b, "Failed=%x.\n", rval); } else { - configured_count = mcp->mb[11]; ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118c, "Done %s.\n", __func__); } diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index bff9689f5ca9..7e0345d7a8d6 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -3110,6 +3110,9 @@ static void qlt_send_term_imm_notif(struct scsi_qla_host *vha, #if 0 /* Todo */ if (rc == -ENOMEM) qlt_alloc_qfull_cmd(vha, imm, 0, 0); +#else + if (rc) { + } #endif goto done; } From bb1181c9a8b46b6f10e749d9ed94480336445d7f Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Fri, 23 Dec 2016 18:06:05 -0800 Subject: [PATCH 528/645] qla2xxx: Fix wrong IOCB type assumption qlt_reset is called with Immedidate Notify IOCB only. Current code wrongly cast it as ATIO IOCB. Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_target.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 7e0345d7a8d6..dd5b2e22bd5c 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -668,11 +668,9 @@ static int qlt_reset(struct scsi_qla_host *vha, void *iocb, int mcmd) { struct qla_hw_data *ha = vha->hw; struct qla_tgt_sess *sess = NULL; - uint32_t unpacked_lun, lun = 0; uint16_t loop_id; int res = 0; struct imm_ntfy_from_isp *n = (struct imm_ntfy_from_isp *)iocb; - struct atio_from_isp *a = (struct atio_from_isp *)iocb; unsigned long flags; loop_id = le16_to_cpu(n->u.isp24.nport_handle); @@ -725,11 +723,7 @@ static int qlt_reset(struct scsi_qla_host *vha, void *iocb, int mcmd) "loop_id %d)\n", vha->host_no, sess, sess->port_name, mcmd, loop_id); - lun = a->u.isp24.fcp_cmnd.lun; - unpacked_lun = scsilun_to_int((struct scsi_lun *)&lun); - - return qlt_issue_task_mgmt(sess, unpacked_lun, mcmd, - iocb, QLA24XX_MGMT_SEND_NACK); + return qlt_issue_task_mgmt(sess, 0, mcmd, iocb, QLA24XX_MGMT_SEND_NACK); } /* ha->tgt.sess_lock supposed to be held on entry */ From 1cbb91562df536eac6e06d7bd2df5965ffd67803 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Fri, 23 Dec 2016 18:06:06 -0800 Subject: [PATCH 529/645] qla2xxx: Include ATIO queue in firmware dump when in target mode Include ATIO queue for ISP27XX when firmware dump is collected for target mode. Signed-off-by: Himanshu Madhani Signed-off-by: Giridhar Malavali Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_tmpl.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c index 36935c9ed669..8a58ef3adab4 100644 --- a/drivers/scsi/qla2xxx/qla_tmpl.c +++ b/drivers/scsi/qla2xxx/qla_tmpl.c @@ -433,6 +433,18 @@ qla27xx_fwdt_entry_t263(struct scsi_qla_host *vha, count++; } } + } else if (QLA_TGT_MODE_ENABLED() && + ent->t263.queue_type == T263_QUEUE_TYPE_ATIO) { + struct qla_hw_data *ha = vha->hw; + struct atio *atr = ha->tgt.atio_ring; + + if (atr || !buf) { + length = ha->tgt.atio_q_length; + qla27xx_insert16(0, buf, len); + qla27xx_insert16(length, buf, len); + qla27xx_insertbuf(atr, length * sizeof(*atr), buf, len); + count++; + } } else { ql_dbg(ql_dbg_misc, vha, 0xd026, "%s: unknown queue %x\n", __func__, ent->t263.queue_type); @@ -676,6 +688,18 @@ qla27xx_fwdt_entry_t274(struct scsi_qla_host *vha, count++; } } + } else if (QLA_TGT_MODE_ENABLED() && + ent->t274.queue_type == T274_QUEUE_TYPE_ATIO_SHAD) { + struct qla_hw_data *ha = vha->hw; + struct atio *atr = ha->tgt.atio_ring_ptr; + + if (atr || !buf) { + qla27xx_insert16(0, buf, len); + qla27xx_insert16(1, buf, len); + qla27xx_insert32(ha->tgt.atio_q_in ? + readl(ha->tgt.atio_q_in) : 0, buf, len); + count++; + } } else { ql_dbg(ql_dbg_misc, vha, 0xd02f, "%s: unknown queue %x\n", __func__, ent->t274.queue_type); From 2a47c68529e99e5631af0ac337fb8519c4eadb3f Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Fri, 23 Dec 2016 18:06:07 -0800 Subject: [PATCH 530/645] qla2xxx: Set tcm_qla2xxx version to automatically track qla2xxx version Signed-off-by: Himanshu Madhani Signed-off-by: Giridhar Malavali Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 4 ++-- drivers/scsi/qla2xxx/tcm_qla2xxx.h | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 6643f6fc7795..d925910be761 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1800,7 +1800,7 @@ static ssize_t tcm_qla2xxx_wwn_version_show(struct config_item *item, { return sprintf(page, "TCM QLOGIC QLA2XXX NPIV capable fabric module %s on %s/%s on " - UTS_RELEASE"\n", TCM_QLA2XXX_VERSION, utsname()->sysname, + UTS_RELEASE"\n", QLA2XXX_VERSION, utsname()->sysname, utsname()->machine); } @@ -1906,7 +1906,7 @@ static int tcm_qla2xxx_register_configfs(void) int ret; pr_debug("TCM QLOGIC QLA2XXX fabric module %s on %s/%s on " - UTS_RELEASE"\n", TCM_QLA2XXX_VERSION, utsname()->sysname, + UTS_RELEASE"\n", QLA2XXX_VERSION, utsname()->sysname, utsname()->machine); ret = target_register_template(&tcm_qla2xxx_ops); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h index 37e026a4823d..cf8430be183b 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h @@ -1,7 +1,6 @@ #include #include -#define TCM_QLA2XXX_VERSION "v0.1" /* length of ASCII WWPNs including pad */ #define TCM_QLA2XXX_NAMELEN 32 /* From c0f6462754f050e9bc960662992c029c5ef88f34 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Fri, 23 Dec 2016 18:06:08 -0800 Subject: [PATCH 531/645] qla2xxx: Reset reserved field in firmware options to 0 During NVRAM initialization in target mode, reset reserved fields in firmware options to Zero (BIT 15) Signed-off-by: Himanshu Madhani Signed-off-by: Giridhar Malavali Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_target.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index dd5b2e22bd5c..6eb051783dc8 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -6542,6 +6542,13 @@ qlt_24xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_24xx *nv) /* Disable Full Login after LIP */ nv->host_p &= cpu_to_le32(~BIT_10); + + /* + * clear BIT 15 explicitly as we have seen at least + * a couple of instances where this was set and this + * was causing the firmware to not be initialized. + */ + nv->firmware_options_1 &= cpu_to_le32(~BIT_15); /* Enable target PRLI control */ nv->firmware_options_2 |= cpu_to_le32(BIT_14); } else { @@ -6626,11 +6633,17 @@ qlt_81xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_81xx *nv) /* Disable ini mode, if requested */ if (!qla_ini_mode_enabled(vha)) nv->firmware_options_1 |= cpu_to_le32(BIT_5); - /* Disable Full Login after LIP */ nv->firmware_options_1 &= cpu_to_le32(~BIT_13); /* Enable initial LIP */ nv->firmware_options_1 &= cpu_to_le32(~BIT_9); + /* + * clear BIT 15 explicitly as we have seen at + * least a couple of instances where this was set + * and this was causing the firmware to not be + * initialized. + */ + nv->firmware_options_1 &= cpu_to_le32(~BIT_15); if (ql2xtgt_tape_enable) /* Enable FC tape support */ nv->firmware_options_2 |= cpu_to_le32(BIT_12); From 8d3c9c230818aa3c27edb4fd126494479d35d3d5 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Fri, 23 Dec 2016 18:06:09 -0800 Subject: [PATCH 532/645] qla2xxx: Collect additional information to debug fw dump Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_mbx.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 34de6d7e5262..67f64db390b0 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -323,20 +323,33 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) } } else { - uint16_t mb0; - uint32_t ictrl; + uint16_t mb[8]; + uint32_t ictrl, host_status, hccr; uint16_t w; if (IS_FWI2_CAPABLE(ha)) { - mb0 = RD_REG_WORD(®->isp24.mailbox0); + mb[0] = RD_REG_WORD(®->isp24.mailbox0); + mb[1] = RD_REG_WORD(®->isp24.mailbox1); + mb[2] = RD_REG_WORD(®->isp24.mailbox2); + mb[3] = RD_REG_WORD(®->isp24.mailbox3); + mb[7] = RD_REG_WORD(®->isp24.mailbox7); ictrl = RD_REG_DWORD(®->isp24.ictrl); + host_status = RD_REG_DWORD(®->isp24.host_status); + hccr = RD_REG_DWORD(®->isp24.hccr); + + ql_log(ql_log_warn, vha, 0x1119, + "MBX Command timeout for cmd %x, iocontrol=%x jiffies=%lx " + "mb[0-3]=[0x%x 0x%x 0x%x 0x%x] mb7 0x%x host_status 0x%x hccr 0x%x\n", + command, ictrl, jiffies, mb[0], mb[1], mb[2], mb[3], + mb[7], host_status, hccr); + } else { - mb0 = RD_MAILBOX_REG(ha, ®->isp, 0); + mb[0] = RD_MAILBOX_REG(ha, ®->isp, 0); ictrl = RD_REG_WORD(®->isp.ictrl); + ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1119, + "MBX Command timeout for cmd %x, iocontrol=%x jiffies=%lx " + "mb[0]=0x%x\n", command, ictrl, jiffies, mb[0]); } - ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1119, - "MBX Command timeout for cmd %x, iocontrol=%x jiffies=%lx " - "mb[0]=0x%x\n", command, ictrl, jiffies, mb0); ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1019); /* Capture FW dump only, if PCI device active */ From fc1ffd6cb38a1c1af625b9833c41928039e733f5 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Fri, 23 Dec 2016 18:06:10 -0800 Subject: [PATCH 533/645] qla2xxx: Fix crash due to null pointer access During code inspection, while investigating following stack trace seen on one of the test setup, we found out there was possibility of memory leak becuase driver was not unwinding the stack properly. This issue has not been reproduced in a test environment or on a customer setup. Here's stack trace that was seen. [1469877.797315] Call Trace: [1469877.799940] [] qla2x00_mem_alloc+0xb09/0x10c0 [qla2xxx] [1469877.806980] [] qla2x00_probe_one+0x86a/0x1b50 [qla2xxx] [1469877.814013] [] ? __pm_runtime_resume+0x51/0xa0 [1469877.820265] [] ? _raw_spin_lock_irqsave+0x25/0x90 [1469877.826776] [] ? _raw_spin_unlock_irqrestore+0x6d/0x80 [1469877.833720] [] ? preempt_count_sub+0xb1/0x100 [1469877.839885] [] ? _raw_spin_unlock_irqrestore+0x4c/0x80 [1469877.846830] [] local_pci_probe+0x4c/0xb0 [1469877.852562] [] ? preempt_count_sub+0xb1/0x100 [1469877.858727] [] pci_call_probe+0x89/0xb0 Cc: Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Christoph Hellwig [ bvanassche: Fixed spelling in patch description ] Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_os.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 8521cfe302e9..074dcca6ca5a 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -3662,7 +3662,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, sizeof(struct ct6_dsd), 0, SLAB_HWCACHE_ALIGN, NULL); if (!ctx_cachep) - goto fail_free_gid_list; + goto fail_free_srb_mempool; } ha->ctx_mempool = mempool_create_slab_pool(SRB_MIN_REQ, ctx_cachep); @@ -3815,7 +3815,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, ha->loop_id_map = kzalloc(BITS_TO_LONGS(LOOPID_MAP_SIZE) * sizeof(long), GFP_KERNEL); if (!ha->loop_id_map) - goto fail_async_pd; + goto fail_loop_id_map; else { qla2x00_set_reserved_loop_ids(ha); ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0123, @@ -3824,6 +3824,8 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, return 0; +fail_loop_id_map: + dma_pool_free(ha->s_dma_pool, ha->async_pd, ha->async_pd_dma); fail_async_pd: dma_pool_free(ha->s_dma_pool, ha->ex_init_cb, ha->ex_init_cb_dma); fail_ex_init_cb: @@ -3851,6 +3853,10 @@ fail_free_ms_iocb: dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); ha->ms_iocb = NULL; ha->ms_iocb_dma = 0; + + if (ha->sns_cmd) + dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt), + ha->sns_cmd, ha->sns_cmd_dma); fail_dma_pool: if (IS_QLA82XX(ha) || ql2xenabledif) { dma_pool_destroy(ha->fcp_cmnd_dma_pool); @@ -3868,10 +3874,12 @@ fail_free_nvram: kfree(ha->nvram); ha->nvram = NULL; fail_free_ctx_mempool: - mempool_destroy(ha->ctx_mempool); + if (ha->ctx_mempool) + mempool_destroy(ha->ctx_mempool); ha->ctx_mempool = NULL; fail_free_srb_mempool: - mempool_destroy(ha->srb_mempool); + if (ha->srb_mempool) + mempool_destroy(ha->srb_mempool); ha->srb_mempool = NULL; fail_free_gid_list: dma_free_coherent(&ha->pdev->dev, qla2x00_gid_list_size(ha), From 5f35509db179ca7ed1feaa4b14f841adb06ed220 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Fri, 23 Dec 2016 18:06:11 -0800 Subject: [PATCH 534/645] qla2xxx: Terminate exchange if corrupted Corrupted ATIO is defined as length of fcp_header & fcp_cmd payload is less than 0x38. It's the minimum size for a frame to carry 8..16 bytes SCSI CDB. The exchange will be dropped or terminated if corrupted. Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Christoph Hellwig [ bvanassche: Fixed spelling in patch title ] Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_def.h | 3 ++- drivers/scsi/qla2xxx/qla_target.c | 23 ++++++++++++++++++++--- drivers/scsi/qla2xxx/qla_target.h | 22 +++++++++++++++++++++- 3 files changed, 43 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index f7df01b76714..1f7c6d2c736d 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -1556,7 +1556,8 @@ typedef struct { struct atio { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ - uint8_t data[58]; + __le16 attr_n_length; + uint8_t data[56]; uint32_t signature; #define ATIO_PROCESSED 0xDEADDEAD /* Signature */ }; diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 6eb051783dc8..85dcd7cdffca 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -6454,12 +6454,29 @@ qlt_24xx_process_atio_queue(struct scsi_qla_host *vha, uint8_t ha_locked) if (!vha->flags.online) return; - while (ha->tgt.atio_ring_ptr->signature != ATIO_PROCESSED) { + while ((ha->tgt.atio_ring_ptr->signature != ATIO_PROCESSED) || + fcpcmd_is_corrupted(ha->tgt.atio_ring_ptr)) { pkt = (struct atio_from_isp *)ha->tgt.atio_ring_ptr; cnt = pkt->u.raw.entry_count; - qlt_24xx_atio_pkt_all_vps(vha, (struct atio_from_isp *)pkt, - ha_locked); + if (unlikely(fcpcmd_is_corrupted(ha->tgt.atio_ring_ptr))) { + /* + * This packet is corrupted. The header + payload + * can not be trusted. There is no point in passing + * it further up. + */ + ql_log(ql_log_warn, vha, 0xffff, + "corrupted fcp frame SID[%3phN] OXID[%04x] EXCG[%x] %64phN\n", + pkt->u.isp24.fcp_hdr.s_id, + be16_to_cpu(pkt->u.isp24.fcp_hdr.ox_id), + le32_to_cpu(pkt->u.isp24.exchange_addr), pkt); + + adjust_corrupted_atio(pkt); + qlt_send_term_exchange(vha, NULL, pkt, ha_locked, 0); + } else { + qlt_24xx_atio_pkt_all_vps(vha, + (struct atio_from_isp *)pkt, ha_locked); + } for (i = 0; i < cnt; i++) { ha->tgt.atio_ring_index++; diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index f26c5f60eedd..0824a8164a24 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -427,13 +427,33 @@ struct atio_from_isp { struct { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ - uint8_t data[58]; + __le16 attr_n_length; +#define FCP_CMD_LENGTH_MASK 0x0fff +#define FCP_CMD_LENGTH_MIN 0x38 + uint8_t data[56]; uint32_t signature; #define ATIO_PROCESSED 0xDEADDEAD /* Signature */ } raw; } u; } __packed; +static inline int fcpcmd_is_corrupted(struct atio *atio) +{ + if (atio->entry_type == ATIO_TYPE7 && + (le16_to_cpu(atio->attr_n_length & FCP_CMD_LENGTH_MASK) < + FCP_CMD_LENGTH_MIN)) + return 1; + else + return 0; +} + +/* adjust corrupted atio so we won't trip over the same entry again. */ +static inline void adjust_corrupted_atio(struct atio_from_isp *atio) +{ + atio->u.raw.attr_n_length = cpu_to_le16(FCP_CMD_LENGTH_MIN); + atio->u.isp24.fcp_cmnd.add_cdb_len = 0; +} + #define CTIO_TYPE7 0x12 /* Continue target I/O entry (for 24xx) */ /* From 200ffb159b2f48857aa18c0502a4d29b102d013b Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Fri, 23 Dec 2016 18:06:12 -0800 Subject: [PATCH 535/645] qla2xxx: Reduce exess wait during chip reset Soft reset and Risc reset should take 100uS to complete. This change pad the timeout up to 400uS, which should be plenty. Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Christoph Hellwig Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 632d5f30386a..7b6317c8c2e9 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1191,7 +1191,7 @@ qla24xx_reset_risc(scsi_qla_host_t *vha) /* Wait for soft-reset to complete. */ RD_REG_DWORD(®->ctrl_status); - for (cnt = 0; cnt < 6000000; cnt++) { + for (cnt = 0; cnt < 60; cnt++) { barrier(); if ((RD_REG_DWORD(®->ctrl_status) & CSRX_ISP_SOFT_RESET) == 0) @@ -1234,7 +1234,7 @@ qla24xx_reset_risc(scsi_qla_host_t *vha) RD_REG_DWORD(®->hccr); RD_REG_WORD(®->mailbox0); - for (cnt = 6000000; RD_REG_WORD(®->mailbox0) != 0 && + for (cnt = 60; RD_REG_WORD(®->mailbox0) != 0 && rval == QLA_SUCCESS; cnt--) { barrier(); if (cnt) From 4f060736f29a960aba8e781a88837464756200a8 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Fri, 23 Dec 2016 18:06:13 -0800 Subject: [PATCH 536/645] qla2xxx: Fix erroneous invalid handle message Termination of Immediate Notify IOCB was using wrong IOCB handle. IOCB completion code was unable to find appropriate code path due to wrong handle. Following message is seen in the logs. "Error entry - invalid handle/queue (ffff)." Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Christoph Hellwig [ bvanassche: Fixed word order in patch title ] Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_isr.c | 4 ++++ drivers/scsi/qla2xxx/qla_target.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 5093ca9b02ec..0c6bd938f8f4 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2496,6 +2496,10 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt) if (pkt->entry_status & RF_BUSY) res = DID_BUS_BUSY << 16; + if (pkt->entry_type == NOTIFY_ACK_TYPE && + pkt->handle == QLA_TGT_SKIP_HANDLE) + return; + sp = qla2x00_get_sp_from_handle(vha, func, req, pkt); if (sp) { sp->done(ha, sp, res); diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 85dcd7cdffca..73ec6b764951 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -3061,7 +3061,7 @@ static int __qlt_send_term_imm_notif(struct scsi_qla_host *vha, pkt->entry_type = NOTIFY_ACK_TYPE; pkt->entry_count = 1; - pkt->handle = QLA_TGT_SKIP_HANDLE | CTIO_COMPLETION_HANDLE_MARK; + pkt->handle = QLA_TGT_SKIP_HANDLE; nack = (struct nack_to_isp *)pkt; nack->ox_id = ntfy->ox_id; From 300af14bdb28157090f0c6f89d244fda940082da Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Fri, 23 Dec 2016 18:06:14 -0800 Subject: [PATCH 537/645] qla2xxx: Disable out-of-order processing by default in firmware Out of order(OOO) processing requires initiator, switch and target to support OOO. In today's environment, none of the switches support OOO. OOO requires extra buffer space which affect performance. By turning ON this feature in QLogic's FW, it delays error recovery because dropped frame is treated as out of order frame. We're turning OFF this option of speed up error recovery. Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Christoph Hellwig [ bvanassche: Fixed spelling in patch description ] Signed-off-by: Bart Van Assche --- drivers/scsi/qla2xxx/qla_target.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 73ec6b764951..e4fda84b959e 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -6581,9 +6581,6 @@ qlt_24xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_24xx *nv) return; } - /* out-of-order frames reassembly */ - nv->firmware_options_3 |= BIT_6|BIT_9; - if (ha->tgt.enable_class_2) { if (vha->flags.init_done) fc_host_supported_classes(vha->host) = @@ -6685,9 +6682,6 @@ qlt_81xx_config_nvram_stage1(struct scsi_qla_host *vha, struct nvram_81xx *nv) return; } - /* out-of-order frames reassembly */ - nv->firmware_options_3 |= BIT_6|BIT_9; - if (ha->tgt.enable_class_2) { if (vha->flags.init_done) fc_host_supported_classes(vha->host) = From ffb58456589443ca572221fabbdef3db8483a779 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 1 Jan 2017 09:39:24 -0800 Subject: [PATCH 538/645] scsi: mpt3sas: fix hang on ata passthrough commands mpt3sas has a firmware failure where it can only handle one pass through ATA command at a time. If another comes in, contrary to the SAT standard, it will hang until the first one completes (causing long commands like secure erase to timeout). The original fix was to block the device when an ATA command came in, but this caused a regression with commit 669f044170d8933c3d66d231b69ea97cb8447338 Author: Bart Van Assche Date: Tue Nov 22 16:17:13 2016 -0800 scsi: srp_transport: Move queuecommand() wait code to SCSI core So fix the original fix of the secure erase timeout by properly returning SAM_STAT_BUSY like the SAT recommends. The original patch also had a concurrency problem since scsih_qcmd is lockless at that point (this is fixed by using atomic bitops to set and test the flag). [mkp: addressed feedback wrt. test_bit and fixed whitespace] Fixes: 18f6084a989ba1b (mpt3sas: Fix secure erase premature termination) Signed-off-by: James Bottomley Acked-by: Sreekanth Reddy Reviewed-by: Christoph Hellwig Reported-by: Ingo Molnar Tested-by: Ingo Molnar Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.h | 12 +++++++++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 40 ++++++++++++++++++---------- 2 files changed, 38 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 394fe1338d09..dcb33f4fa687 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -393,6 +393,7 @@ struct MPT3SAS_TARGET { * @eedp_enable: eedp support enable bit * @eedp_type: 0(type_1), 1(type_2), 2(type_3) * @eedp_block_length: block size + * @ata_command_pending: SATL passthrough outstanding for device */ struct MPT3SAS_DEVICE { struct MPT3SAS_TARGET *sas_target; @@ -404,6 +405,17 @@ struct MPT3SAS_DEVICE { u8 ignore_delay_remove; /* Iopriority Command Handling */ u8 ncq_prio_enable; + /* + * Bug workaround for SATL handling: the mpt2/3sas firmware + * doesn't return BUSY or TASK_SET_FULL for subsequent + * commands while a SATL pass through is in operation as the + * spec requires, it simply does nothing with them until the + * pass through completes, causing them possibly to timeout if + * the passthrough is a long executing command (like format or + * secure erase). This variable allows us to do the right + * thing while a SATL command is pending. + */ + unsigned long ata_command_pending; }; diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index b5c966e319d3..75f3fce1c867 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3899,9 +3899,18 @@ _scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc, } } -static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +static int _scsih_set_satl_pending(struct scsi_cmnd *scmd, bool pending) { - return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); + struct MPT3SAS_DEVICE *priv = scmd->device->hostdata; + + if (scmd->cmnd[0] != ATA_12 && scmd->cmnd[0] != ATA_16) + return 0; + + if (pending) + return test_and_set_bit(0, &priv->ata_command_pending); + + clear_bit(0, &priv->ata_command_pending); + return 0; } /** @@ -3925,9 +3934,7 @@ _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc) if (!scmd) continue; count++; - if (ata_12_16_cmd(scmd)) - scsi_internal_device_unblock(scmd->device, - SDEV_RUNNING); + _scsih_set_satl_pending(scmd, false); mpt3sas_base_free_smid(ioc, smid); scsi_dma_unmap(scmd); if (ioc->pci_error_recovery) @@ -4063,13 +4070,6 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) if (ioc->logging_level & MPT_DEBUG_SCSI) scsi_print_command(scmd); - /* - * Lock the device for any subsequent command until command is - * done. - */ - if (ata_12_16_cmd(scmd)) - scsi_internal_device_block(scmd->device); - sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4083,6 +4083,19 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) return 0; } + /* + * Bug work around for firmware SATL handling. The loop + * is based on atomic operations and ensures consistency + * since we're lockless at this point + */ + do { + if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { + scmd->result = SAM_STAT_BUSY; + scmd->scsi_done(scmd); + return 0; + } + } while (_scsih_set_satl_pending(scmd, true)); + sas_target_priv_data = sas_device_priv_data->sas_target; /* invalid device handle */ @@ -4650,8 +4663,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) if (scmd == NULL) return 1; - if (ata_12_16_cmd(scmd)) - scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + _scsih_set_satl_pending(scmd, false); mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); From bf46ecc3d8cca05f2907cf482755c42c2b11a79d Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Tue, 17 Jan 2017 11:41:41 -0800 Subject: [PATCH 539/645] xfs: make the ASSERT() condition likely The ASSERT() condition is the normal case, not the exception, so testing the condition should be likely(), not unlikely(). Reviewed-by: Christoph Hellwig Signed-off-by: Amir Goldstein Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_linux.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_linux.h b/fs/xfs/xfs_linux.h index e467218c0098..7a989de224f4 100644 --- a/fs/xfs/xfs_linux.h +++ b/fs/xfs/xfs_linux.h @@ -331,11 +331,11 @@ static inline __uint64_t howmany_64(__uint64_t x, __uint32_t y) } #define ASSERT_ALWAYS(expr) \ - (unlikely(expr) ? (void)0 : assfail(#expr, __FILE__, __LINE__)) + (likely(expr) ? (void)0 : assfail(#expr, __FILE__, __LINE__)) #ifdef DEBUG #define ASSERT(expr) \ - (unlikely(expr) ? (void)0 : assfail(#expr, __FILE__, __LINE__)) + (likely(expr) ? (void)0 : assfail(#expr, __FILE__, __LINE__)) #ifndef STATIC # define STATIC noinline @@ -346,7 +346,7 @@ static inline __uint64_t howmany_64(__uint64_t x, __uint32_t y) #ifdef XFS_WARN #define ASSERT(expr) \ - (unlikely(expr) ? (void)0 : asswarn(#expr, __FILE__, __LINE__)) + (likely(expr) ? (void)0 : asswarn(#expr, __FILE__, __LINE__)) #ifndef STATIC # define STATIC static noinline From 3c6f46eacd876bd723a9bad3c6882714c052fd8e Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Tue, 17 Jan 2017 11:41:41 -0800 Subject: [PATCH 540/645] xfs: sanity check directory inode di_size This changes fixes an assertion hit when fuzzing on-disk i_mode values. The easy case to fix is when changing an empty file i_mode to S_IFDIR. In this case, xfs_dinode_verify() detects an illegal zero size for directory and fails to load the inode structure from disk. For the case of non empty file whose i_mode is changed to S_IFDIR, the ASSERT() statement in xfs_dir2_isblock() is replaced with return -EFSCORRUPTED, to avoid interacting with corrupted jusk also when XFS_DEBUG is disabled. Suggested-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Amir Goldstein Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_dir2.c | 3 ++- fs/xfs/libxfs/xfs_inode_buf.c | 7 +++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/xfs/libxfs/xfs_dir2.c b/fs/xfs/libxfs/xfs_dir2.c index c58d72c220f5..4f7913f84b28 100644 --- a/fs/xfs/libxfs/xfs_dir2.c +++ b/fs/xfs/libxfs/xfs_dir2.c @@ -631,7 +631,8 @@ xfs_dir2_isblock( if ((rval = xfs_bmap_last_offset(args->dp, &last, XFS_DATA_FORK))) return rval; rval = XFS_FSB_TO_B(args->dp->i_mount, last) == args->geo->blksize; - ASSERT(rval == 0 || args->dp->i_d.di_size == args->geo->blksize); + if (rval != 0 && args->dp->i_d.di_size != args->geo->blksize) + return -EFSCORRUPTED; *vp = rval; return 0; } diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c index dd483e2767f7..0091ac3f5241 100644 --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -386,6 +386,7 @@ xfs_dinode_verify( xfs_ino_t ino, struct xfs_dinode *dip) { + uint16_t mode; uint16_t flags; uint64_t flags2; @@ -396,8 +397,10 @@ xfs_dinode_verify( if (be64_to_cpu(dip->di_size) & (1ULL << 63)) return false; - /* No zero-length symlinks. */ - if (S_ISLNK(be16_to_cpu(dip->di_mode)) && dip->di_size == 0) + mode = be16_to_cpu(dip->di_mode); + + /* No zero-length symlinks/dirs. */ + if ((S_ISLNK(mode) || S_ISDIR(mode)) && dip->di_size == 0) return false; /* only version 3 or greater inodes are extensively verified here */ From b597dd5373a1ccc08218665dc8417433b1c09550 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Tue, 17 Jan 2017 11:41:42 -0800 Subject: [PATCH 541/645] xfs: add missing include dependencies to xfs_dir2.h xfs_dir2.h dereferences some data types in inline functions and fails to include those type definitions, e.g.: xfs_dir2_data_aoff_t, struct xfs_da_geometry. Signed-off-by: Amir Goldstein Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_dir2.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h index 0197590fa7d7..72df0dc1bd2a 100644 --- a/fs/xfs/libxfs/xfs_dir2.h +++ b/fs/xfs/libxfs/xfs_dir2.h @@ -18,6 +18,9 @@ #ifndef __XFS_DIR2_H__ #define __XFS_DIR2_H__ +#include "xfs_da_format.h" +#include "xfs_da_btree.h" + struct xfs_defer_ops; struct xfs_da_args; struct xfs_inode; From 1fc4d33fed124fb182e8e6c214e973a29389ae83 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Tue, 17 Jan 2017 11:41:43 -0800 Subject: [PATCH 542/645] xfs: replace xfs_mode_to_ftype table with switch statement The size of the xfs_mode_to_ftype[] conversion table was too small to handle an invalid value of mode=S_IFMT. Instead of fixing the table size, replace the conversion table with a conversion helper that uses a switch statement. Suggested-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Amir Goldstein Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_dir2.c | 36 ++++++++++++++++++++++-------------- fs/xfs/libxfs/xfs_dir2.h | 5 ++--- fs/xfs/xfs_iops.c | 2 +- 3 files changed, 25 insertions(+), 18 deletions(-) diff --git a/fs/xfs/libxfs/xfs_dir2.c b/fs/xfs/libxfs/xfs_dir2.c index 4f7913f84b28..eb64f3884d3d 100644 --- a/fs/xfs/libxfs/xfs_dir2.c +++ b/fs/xfs/libxfs/xfs_dir2.c @@ -36,21 +36,29 @@ struct xfs_name xfs_name_dotdot = { (unsigned char *)"..", 2, XFS_DIR3_FT_DIR }; /* - * @mode, if set, indicates that the type field needs to be set up. - * This uses the transformation from file mode to DT_* as defined in linux/fs.h - * for file type specification. This will be propagated into the directory - * structure if appropriate for the given operation and filesystem config. + * Convert inode mode to directory entry filetype */ -const unsigned char xfs_mode_to_ftype[S_IFMT >> S_SHIFT] = { - [0] = XFS_DIR3_FT_UNKNOWN, - [S_IFREG >> S_SHIFT] = XFS_DIR3_FT_REG_FILE, - [S_IFDIR >> S_SHIFT] = XFS_DIR3_FT_DIR, - [S_IFCHR >> S_SHIFT] = XFS_DIR3_FT_CHRDEV, - [S_IFBLK >> S_SHIFT] = XFS_DIR3_FT_BLKDEV, - [S_IFIFO >> S_SHIFT] = XFS_DIR3_FT_FIFO, - [S_IFSOCK >> S_SHIFT] = XFS_DIR3_FT_SOCK, - [S_IFLNK >> S_SHIFT] = XFS_DIR3_FT_SYMLINK, -}; +const unsigned char xfs_mode_to_ftype(int mode) +{ + switch (mode & S_IFMT) { + case S_IFREG: + return XFS_DIR3_FT_REG_FILE; + case S_IFDIR: + return XFS_DIR3_FT_DIR; + case S_IFCHR: + return XFS_DIR3_FT_CHRDEV; + case S_IFBLK: + return XFS_DIR3_FT_BLKDEV; + case S_IFIFO: + return XFS_DIR3_FT_FIFO; + case S_IFSOCK: + return XFS_DIR3_FT_SOCK; + case S_IFLNK: + return XFS_DIR3_FT_SYMLINK; + default: + return XFS_DIR3_FT_UNKNOWN; + } +} /* * ASCII case-insensitive (ie. A-Z) support for directories that was diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h index 72df0dc1bd2a..d4b77ab37a98 100644 --- a/fs/xfs/libxfs/xfs_dir2.h +++ b/fs/xfs/libxfs/xfs_dir2.h @@ -35,10 +35,9 @@ struct xfs_dir2_data_unused; extern struct xfs_name xfs_name_dotdot; /* - * directory filetype conversion tables. + * Convert inode mode to directory entry filetype */ -#define S_SHIFT 12 -extern const unsigned char xfs_mode_to_ftype[]; +extern const unsigned char xfs_mode_to_ftype(int mode); /* * directory operations vector for encode/decode routines diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index 308bebb6dfd2..821f08d4e256 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -103,7 +103,7 @@ xfs_dentry_to_name( { namep->name = dentry->d_name.name; namep->len = dentry->d_name.len; - namep->type = xfs_mode_to_ftype[(mode & S_IFMT) >> S_SHIFT]; + namep->type = xfs_mode_to_ftype(mode); } STATIC void From fab8eef86c814c3dd46bc5d760b6e4a53d5fc5a6 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Tue, 17 Jan 2017 11:41:44 -0800 Subject: [PATCH 543/645] xfs: sanity check inode mode when creating new dentry The helper xfs_dentry_to_name() is used by 2 different classes of callers: Callers that pass zero mode and don't care about the returned name.type field and Callers that pass non zero mode and do care about the name.type field. Change xfs_dentry_to_name() to not take the mode argument and change the call sites of the first class to not pass the mode argument. Create a new helper xfs_dentry_mode_to_name() which does pass the mode argument and returns -EFSCORRUPTED if mode is invalid. Callers that translate non zero mode to on-disk file type now check the return value and will export the error to user instead of staging an invalid file type to be written to directory entry. Signed-off-by: Amir Goldstein Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_iops.c | 48 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 39 insertions(+), 9 deletions(-) diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index 821f08d4e256..22c16155f1b4 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -97,6 +97,16 @@ xfs_init_security( static void xfs_dentry_to_name( + struct xfs_name *namep, + struct dentry *dentry) +{ + namep->name = dentry->d_name.name; + namep->len = dentry->d_name.len; + namep->type = XFS_DIR3_FT_UNKNOWN; +} + +static int +xfs_dentry_mode_to_name( struct xfs_name *namep, struct dentry *dentry, int mode) @@ -104,6 +114,11 @@ xfs_dentry_to_name( namep->name = dentry->d_name.name; namep->len = dentry->d_name.len; namep->type = xfs_mode_to_ftype(mode); + + if (unlikely(namep->type == XFS_DIR3_FT_UNKNOWN)) + return -EFSCORRUPTED; + + return 0; } STATIC void @@ -119,7 +134,7 @@ xfs_cleanup_inode( * xfs_init_security we must back out. * ENOSPC can hit here, among other things. */ - xfs_dentry_to_name(&teardown, dentry, 0); + xfs_dentry_to_name(&teardown, dentry); xfs_remove(XFS_I(dir), &teardown, XFS_I(inode)); } @@ -154,8 +169,12 @@ xfs_generic_create( if (error) return error; + /* Verify mode is valid also for tmpfile case */ + error = xfs_dentry_mode_to_name(&name, dentry, mode); + if (unlikely(error)) + goto out_free_acl; + if (!tmpfile) { - xfs_dentry_to_name(&name, dentry, mode); error = xfs_create(XFS_I(dir), &name, mode, rdev, &ip); } else { error = xfs_create_tmpfile(XFS_I(dir), dentry, mode, &ip); @@ -248,7 +267,7 @@ xfs_vn_lookup( if (dentry->d_name.len >= MAXNAMELEN) return ERR_PTR(-ENAMETOOLONG); - xfs_dentry_to_name(&name, dentry, 0); + xfs_dentry_to_name(&name, dentry); error = xfs_lookup(XFS_I(dir), &name, &cip, NULL); if (unlikely(error)) { if (unlikely(error != -ENOENT)) @@ -275,7 +294,7 @@ xfs_vn_ci_lookup( if (dentry->d_name.len >= MAXNAMELEN) return ERR_PTR(-ENAMETOOLONG); - xfs_dentry_to_name(&xname, dentry, 0); + xfs_dentry_to_name(&xname, dentry); error = xfs_lookup(XFS_I(dir), &xname, &ip, &ci_name); if (unlikely(error)) { if (unlikely(error != -ENOENT)) @@ -310,7 +329,9 @@ xfs_vn_link( struct xfs_name name; int error; - xfs_dentry_to_name(&name, dentry, inode->i_mode); + error = xfs_dentry_mode_to_name(&name, dentry, inode->i_mode); + if (unlikely(error)) + return error; error = xfs_link(XFS_I(dir), XFS_I(inode), &name); if (unlikely(error)) @@ -329,7 +350,7 @@ xfs_vn_unlink( struct xfs_name name; int error; - xfs_dentry_to_name(&name, dentry, 0); + xfs_dentry_to_name(&name, dentry); error = xfs_remove(XFS_I(dir), &name, XFS_I(d_inode(dentry))); if (error) @@ -359,7 +380,9 @@ xfs_vn_symlink( mode = S_IFLNK | (irix_symlink_mode ? 0777 & ~current_umask() : S_IRWXUGO); - xfs_dentry_to_name(&name, dentry, mode); + error = xfs_dentry_mode_to_name(&name, dentry, mode); + if (unlikely(error)) + goto out; error = xfs_symlink(XFS_I(dir), &name, symname, mode, &cip); if (unlikely(error)) @@ -395,6 +418,7 @@ xfs_vn_rename( { struct inode *new_inode = d_inode(ndentry); int omode = 0; + int error; struct xfs_name oname; struct xfs_name nname; @@ -405,8 +429,14 @@ xfs_vn_rename( if (flags & RENAME_EXCHANGE) omode = d_inode(ndentry)->i_mode; - xfs_dentry_to_name(&oname, odentry, omode); - xfs_dentry_to_name(&nname, ndentry, d_inode(odentry)->i_mode); + error = xfs_dentry_mode_to_name(&oname, odentry, omode); + if (omode && unlikely(error)) + return error; + + error = xfs_dentry_mode_to_name(&nname, ndentry, + d_inode(odentry)->i_mode); + if (unlikely(error)) + return error; return xfs_rename(XFS_I(odir), &oname, XFS_I(d_inode(odentry)), XFS_I(ndir), &nname, From a324cbf10a3c67aaa10c9f47f7b5801562925bc2 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Tue, 17 Jan 2017 11:41:44 -0800 Subject: [PATCH 544/645] xfs: sanity check inode di_mode Check for invalid file type in xfs_dinode_verify() and fail to load the inode structure from disk. Reviewed-by: Darrick J. Wong Signed-off-by: Amir Goldstein Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_inode_buf.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c index 0091ac3f5241..d93f9d918cfc 100644 --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -29,6 +29,7 @@ #include "xfs_icache.h" #include "xfs_trans.h" #include "xfs_ialloc.h" +#include "xfs_dir2.h" /* * Check that none of the inode's in the buffer have a next @@ -398,6 +399,8 @@ xfs_dinode_verify( return false; mode = be16_to_cpu(dip->di_mode); + if (mode && xfs_mode_to_ftype(mode) == XFS_DIR3_FT_UNKNOWN) + return false; /* No zero-length symlinks/dirs. */ if ((S_ISLNK(mode) || S_ISDIR(mode)) && dip->di_size == 0) From 657bdfb7f5e68ca5e2ed009ab473c429b0d6af85 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 17 Jan 2017 11:43:38 -0800 Subject: [PATCH 545/645] xfs: don't wrap ID in xfs_dq_get_next_id The GETNEXTQOTA ioctl takes whatever ID is sent in, and looks for the next active quota for an user equal or higher to that ID. But if we are at the maximum ID and then ask for the "next" one, we may wrap back to zero. In this case, userspace may loop forever, because it will start querying again at zero. We'll fix this in userspace as well, but for the kernel, return -ENOENT if we ask for the next quota ID past UINT_MAX so the caller knows to stop. Signed-off-by: Eric Sandeen Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/xfs_dquot.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index 7a30b8f11db7..9d06cc30e875 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -710,6 +710,10 @@ xfs_dq_get_next_id( /* Simple advance */ next_id = *id + 1; + /* If we'd wrap past the max ID, stop */ + if (next_id < *id) + return -ENOENT; + /* If new ID is within the current chunk, advancing it sufficed */ if (next_id % mp->m_quotainfo->qi_dqperchunk) { *id = next_id; From f7bcd4b6f6983d668b057dc166799716690423a4 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 6 Jan 2017 09:04:32 +0100 Subject: [PATCH 546/645] ARM64: dts: meson-gxbb-odroidc2: Disable SCPI DVFS The current hardware is not able to run with all cores enabled at a cluster frequency superior at 1536MHz. But the currently shipped u-boot for the platform still reports an OPP table with possible DVFS frequency up to 2GHz, and will not change since the off-tree linux tree supports limiting the OPPs with a kernel parameter. A recent u-boot change reports the boot-time DVFS around 100MHz and the default performance cpufreq governor sets the maximum frequency. Previous version of u-boot reported to be already at the max OPP and left the OPP as is. Nevertheless, other governors like ondemand could setup the max frequency and make the system crash. This patch disables the DVFS clock and disables cpufreq. Fixes: 70db166a2baa ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes") Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman Signed-off-by: Olof Johansson --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 238fbeacd330..5d28e1cdc998 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -137,6 +137,10 @@ }; }; +&scpi_clocks { + status = "disabled"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 596240c38a9c..b35307321b63 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -55,7 +55,7 @@ mboxes = <&mailbox 1 &mailbox 2>; shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - clocks { + scpi_clocks: clocks { compatible = "arm,scpi-clocks"; scpi_dvfs: scpi_clocks@0 { From e05208ded1905e500cd5b369d624b071951c68b9 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 10 Jan 2017 20:00:40 +0800 Subject: [PATCH 547/645] drm/amdgpu: fix bug set incorrect value to vce register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Set the proper bits for clockgating setup. Signed-off-by: Rex Zhu Acked-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index 5fb0b7f5c065..b621bde8c240 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -175,7 +175,7 @@ static void vce_v3_0_set_vce_sw_clock_gating(struct amdgpu_device *adev, WREG32(mmVCE_UENC_CLOCK_GATING_2, data); data = RREG32(mmVCE_UENC_REG_CLOCK_GATING); - data &= ~0xffc00000; + data &= ~0x3ff; WREG32(mmVCE_UENC_REG_CLOCK_GATING, data); data = RREG32(mmVCE_UENC_DMA_DCLK_CTRL); From 50a1ebc70a2803deb7811fc73fb55d70e353bc34 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Tue, 10 Jan 2017 20:03:59 +0800 Subject: [PATCH 548/645] drm/amdgpu: fix program vce instance logic error. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit need to clear bit31-29 in GRBM_GFX_INDEX, then the program can be valid. Signed-off-by: Rex Zhu Acked-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index b621bde8c240..37ca685e5a9a 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -43,9 +43,13 @@ #define GRBM_GFX_INDEX__VCE_INSTANCE__SHIFT 0x04 #define GRBM_GFX_INDEX__VCE_INSTANCE_MASK 0x10 +#define GRBM_GFX_INDEX__VCE_ALL_PIPE 0x07 + #define mmVCE_LMI_VCPU_CACHE_40BIT_BAR0 0x8616 #define mmVCE_LMI_VCPU_CACHE_40BIT_BAR1 0x8617 #define mmVCE_LMI_VCPU_CACHE_40BIT_BAR2 0x8618 +#define mmGRBM_GFX_INDEX_DEFAULT 0xE0000000 + #define VCE_STATUS_VCPU_REPORT_FW_LOADED_MASK 0x02 #define VCE_V3_0_FW_SIZE (384 * 1024) @@ -54,6 +58,9 @@ #define FW_52_8_3 ((52 << 24) | (8 << 16) | (3 << 8)) +#define GET_VCE_INSTANCE(i) ((i) << GRBM_GFX_INDEX__VCE_INSTANCE__SHIFT \ + | GRBM_GFX_INDEX__VCE_ALL_PIPE) + static void vce_v3_0_mc_resume(struct amdgpu_device *adev, int idx); static void vce_v3_0_set_ring_funcs(struct amdgpu_device *adev); static void vce_v3_0_set_irq_funcs(struct amdgpu_device *adev); @@ -249,7 +256,7 @@ static int vce_v3_0_start(struct amdgpu_device *adev) if (adev->vce.harvest_config & (1 << idx)) continue; - WREG32_FIELD(GRBM_GFX_INDEX, VCE_INSTANCE, idx); + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(idx)); vce_v3_0_mc_resume(adev, idx); WREG32_FIELD(VCE_STATUS, JOB_BUSY, 1); @@ -273,7 +280,7 @@ static int vce_v3_0_start(struct amdgpu_device *adev) } } - WREG32_FIELD(GRBM_GFX_INDEX, VCE_INSTANCE, 0); + WREG32(mmGRBM_GFX_INDEX, mmGRBM_GFX_INDEX_DEFAULT); mutex_unlock(&adev->grbm_idx_mutex); return 0; @@ -288,7 +295,7 @@ static int vce_v3_0_stop(struct amdgpu_device *adev) if (adev->vce.harvest_config & (1 << idx)) continue; - WREG32_FIELD(GRBM_GFX_INDEX, VCE_INSTANCE, idx); + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(idx)); if (adev->asic_type >= CHIP_STONEY) WREG32_P(mmVCE_VCPU_CNTL, 0, ~0x200001); @@ -306,7 +313,7 @@ static int vce_v3_0_stop(struct amdgpu_device *adev) vce_v3_0_set_vce_sw_clock_gating(adev, false); } - WREG32_FIELD(GRBM_GFX_INDEX, VCE_INSTANCE, 0); + WREG32(mmGRBM_GFX_INDEX, mmGRBM_GFX_INDEX_DEFAULT); mutex_unlock(&adev->grbm_idx_mutex); return 0; @@ -586,17 +593,17 @@ static bool vce_v3_0_check_soft_reset(void *handle) * VCE team suggest use bit 3--bit 6 for busy status check */ mutex_lock(&adev->grbm_idx_mutex); - WREG32_FIELD(GRBM_GFX_INDEX, INSTANCE_INDEX, 0); + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(0)); if (RREG32(mmVCE_STATUS) & AMDGPU_VCE_STATUS_BUSY_MASK) { srbm_soft_reset = REG_SET_FIELD(srbm_soft_reset, SRBM_SOFT_RESET, SOFT_RESET_VCE0, 1); srbm_soft_reset = REG_SET_FIELD(srbm_soft_reset, SRBM_SOFT_RESET, SOFT_RESET_VCE1, 1); } - WREG32_FIELD(GRBM_GFX_INDEX, INSTANCE_INDEX, 0x10); + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(1)); if (RREG32(mmVCE_STATUS) & AMDGPU_VCE_STATUS_BUSY_MASK) { srbm_soft_reset = REG_SET_FIELD(srbm_soft_reset, SRBM_SOFT_RESET, SOFT_RESET_VCE0, 1); srbm_soft_reset = REG_SET_FIELD(srbm_soft_reset, SRBM_SOFT_RESET, SOFT_RESET_VCE1, 1); } - WREG32_FIELD(GRBM_GFX_INDEX, INSTANCE_INDEX, 0); + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(0)); mutex_unlock(&adev->grbm_idx_mutex); if (srbm_soft_reset) { @@ -734,7 +741,7 @@ static int vce_v3_0_set_clockgating_state(void *handle, if (adev->vce.harvest_config & (1 << i)) continue; - WREG32_FIELD(GRBM_GFX_INDEX, VCE_INSTANCE, i); + WREG32(mmGRBM_GFX_INDEX, GET_VCE_INSTANCE(i)); if (enable) { /* initialize VCE_CLOCK_GATING_A: Clock ON/OFF delay */ @@ -753,7 +760,7 @@ static int vce_v3_0_set_clockgating_state(void *handle, vce_v3_0_set_vce_sw_clock_gating(adev, enable); } - WREG32_FIELD(GRBM_GFX_INDEX, VCE_INSTANCE, 0); + WREG32(mmGRBM_GFX_INDEX, mmGRBM_GFX_INDEX_DEFAULT); mutex_unlock(&adev->grbm_idx_mutex); return 0; From ca581e45335c6aa45e5b27999bc13bdefb7e84d9 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 12 Jan 2017 21:48:26 +0800 Subject: [PATCH 549/645] drm/amdgpu: change clock gating mode for uvd_v4. use sw cg when decode. and hw cg when idle. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99313 https://bugzilla.kernel.org/show_bug.cgi?id=192161 Signed-off-by: Rex Zhu Ack-by: Tom St Denis Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c | 42 +++++++-------------------- 1 file changed, 10 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c b/drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c index 96444e4d862a..7fb9137dd89b 100644 --- a/drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c +++ b/drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c @@ -40,13 +40,14 @@ #include "smu/smu_7_0_1_sh_mask.h" static void uvd_v4_2_mc_resume(struct amdgpu_device *adev); -static void uvd_v4_2_init_cg(struct amdgpu_device *adev); static void uvd_v4_2_set_ring_funcs(struct amdgpu_device *adev); static void uvd_v4_2_set_irq_funcs(struct amdgpu_device *adev); static int uvd_v4_2_start(struct amdgpu_device *adev); static void uvd_v4_2_stop(struct amdgpu_device *adev); static int uvd_v4_2_set_clockgating_state(void *handle, enum amd_clockgating_state state); +static void uvd_v4_2_set_dcm(struct amdgpu_device *adev, + bool sw_mode); /** * uvd_v4_2_ring_get_rptr - get read pointer * @@ -140,7 +141,8 @@ static int uvd_v4_2_sw_fini(void *handle) return r; } - +static void uvd_v4_2_enable_mgcg(struct amdgpu_device *adev, + bool enable); /** * uvd_v4_2_hw_init - start and test UVD block * @@ -155,8 +157,7 @@ static int uvd_v4_2_hw_init(void *handle) uint32_t tmp; int r; - uvd_v4_2_init_cg(adev); - uvd_v4_2_set_clockgating_state(adev, AMD_CG_STATE_GATE); + uvd_v4_2_enable_mgcg(adev, true); amdgpu_asic_set_uvd_clocks(adev, 10000, 10000); r = uvd_v4_2_start(adev); if (r) @@ -266,11 +267,13 @@ static int uvd_v4_2_start(struct amdgpu_device *adev) struct amdgpu_ring *ring = &adev->uvd.ring; uint32_t rb_bufsz; int i, j, r; - /* disable byte swapping */ u32 lmi_swap_cntl = 0; u32 mp_swap_cntl = 0; + WREG32(mmUVD_CGC_GATE, 0); + uvd_v4_2_set_dcm(adev, true); + uvd_v4_2_mc_resume(adev); /* disable interupt */ @@ -406,6 +409,8 @@ static void uvd_v4_2_stop(struct amdgpu_device *adev) /* Unstall UMC and register bus */ WREG32_P(mmUVD_LMI_CTRL2, 0, ~(1 << 8)); + + uvd_v4_2_set_dcm(adev, false); } /** @@ -619,19 +624,6 @@ static void uvd_v4_2_set_dcm(struct amdgpu_device *adev, WREG32_UVD_CTX(ixUVD_CGC_CTRL2, tmp2); } -static void uvd_v4_2_init_cg(struct amdgpu_device *adev) -{ - bool hw_mode = true; - - if (hw_mode) { - uvd_v4_2_set_dcm(adev, false); - } else { - u32 tmp = RREG32(mmUVD_CGC_CTRL); - tmp &= ~UVD_CGC_CTRL__DYN_CLOCK_MODE_MASK; - WREG32(mmUVD_CGC_CTRL, tmp); - } -} - static bool uvd_v4_2_is_idle(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; @@ -685,17 +677,6 @@ static int uvd_v4_2_process_interrupt(struct amdgpu_device *adev, static int uvd_v4_2_set_clockgating_state(void *handle, enum amd_clockgating_state state) { - bool gate = false; - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - if (!(adev->cg_flags & AMD_CG_SUPPORT_UVD_MGCG)) - return 0; - - if (state == AMD_CG_STATE_GATE) - gate = true; - - uvd_v4_2_enable_mgcg(adev, gate); - return 0; } @@ -711,9 +692,6 @@ static int uvd_v4_2_set_powergating_state(void *handle, */ struct amdgpu_device *adev = (struct amdgpu_device *)handle; - if (!(adev->pg_flags & AMD_PG_SUPPORT_UVD)) - return 0; - if (state == AMD_PG_STATE_GATE) { uvd_v4_2_stop(adev); return 0; From 4e6e98b1e48c9474aed7ce03025ec319b941e26e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 17 Jan 2017 15:02:13 -0500 Subject: [PATCH 550/645] drm/radeon: add support for new hainan variants New hainan parts require updated smc firmware. Cc: Sonny Jiang Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 32d55220a2d3..414776811e71 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -114,6 +114,7 @@ MODULE_FIRMWARE("radeon/hainan_mc.bin"); MODULE_FIRMWARE("radeon/hainan_rlc.bin"); MODULE_FIRMWARE("radeon/hainan_smc.bin"); MODULE_FIRMWARE("radeon/hainan_k_smc.bin"); +MODULE_FIRMWARE("radeon/banks_k_2_smc.bin"); MODULE_FIRMWARE("radeon/si58_mc.bin"); @@ -1653,6 +1654,7 @@ static int si_init_microcode(struct radeon_device *rdev) int new_fw = 0; bool new_smc = false; bool si58_fw = false; + bool banks2_fw = false; DRM_DEBUG("\n"); @@ -1730,10 +1732,11 @@ static int si_init_microcode(struct radeon_device *rdev) ((rdev->pdev->device == 0x6660) || (rdev->pdev->device == 0x6663) || (rdev->pdev->device == 0x6665) || - (rdev->pdev->device == 0x6667))) || - ((rdev->pdev->revision == 0xc3) && - (rdev->pdev->device == 0x6665))) + (rdev->pdev->device == 0x6667)))) new_smc = true; + else if ((rdev->pdev->revision == 0xc3) && + (rdev->pdev->device == 0x6665)) + banks2_fw = true; new_chip_name = "hainan"; pfp_req_size = SI_PFP_UCODE_SIZE * 4; me_req_size = SI_PM4_UCODE_SIZE * 4; @@ -1886,7 +1889,9 @@ static int si_init_microcode(struct radeon_device *rdev) } } - if (new_smc) + if (banks2_fw) + snprintf(fw_name, sizeof(fw_name), "radeon/banks_k_2_smc.bin"); + else if (new_smc) snprintf(fw_name, sizeof(fw_name), "radeon/%s_k_smc.bin", new_chip_name); else snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", new_chip_name); From 17324b6add82d6c0bf119f1d1944baef392a4e39 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 17 Jan 2017 15:06:58 -0500 Subject: [PATCH 551/645] drm/amdgpu: add support for new hainan variants New hainan parts require updated smc firmware. Cc: Sonny Jiang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index e9242d6fbf84..6e150db8f380 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -64,6 +64,7 @@ MODULE_FIRMWARE("radeon/oland_smc.bin"); MODULE_FIRMWARE("radeon/oland_k_smc.bin"); MODULE_FIRMWARE("radeon/hainan_smc.bin"); MODULE_FIRMWARE("radeon/hainan_k_smc.bin"); +MODULE_FIRMWARE("radeon/banks_k_2_smc.bin"); union power_info { struct _ATOM_POWERPLAY_INFO info; @@ -7701,10 +7702,11 @@ static int si_dpm_init_microcode(struct amdgpu_device *adev) ((adev->pdev->device == 0x6660) || (adev->pdev->device == 0x6663) || (adev->pdev->device == 0x6665) || - (adev->pdev->device == 0x6667))) || - ((adev->pdev->revision == 0xc3) && - (adev->pdev->device == 0x6665))) + (adev->pdev->device == 0x6667)))) chip_name = "hainan_k"; + else if ((adev->pdev->revision == 0xc3) && + (adev->pdev->device == 0x6665)) + chip_name = "banks_k_2"; else chip_name = "hainan"; break; From 1ea6af3216b092ec97129ac81bd95cf254c4b140 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 17 Jan 2017 13:34:06 -0600 Subject: [PATCH 552/645] ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV This fixes commit ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") where the Card Detect and Write Protect pins were improperly configured. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index da8598402ab8..38faa90007d7 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -158,7 +158,7 @@ &mmc1 { interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins &mmc1_cd>; + pinctrl-0 = <&mmc1_pins>; wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>; /* gpio_110 */ vmmc-supply = <&vmmc1>; @@ -193,7 +193,8 @@ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 sdmmc1_wp*/ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_strobe.gpio_126 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ >; }; @@ -242,12 +243,6 @@ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* sys_boot6.gpio_8 */ >; }; - - mmc1_cd: pinmux_mmc1_cd { - pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d11.gpio_110 */ - >; - }; }; From bf5ca68dd2eef59a936969e802d811bdac4709c2 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Wed, 4 Jan 2017 01:55:17 +1000 Subject: [PATCH 553/645] powerpc: Fix pgtable pmd cache init Commit 9b081e10805cd ("powerpc: port 64 bits pgtable_cache to 32 bits") mixed up PMD_INDEX_SIZE and PMD_CACHE_INDEX a couple of times. This resulted in 64s/hash/4k configs to panic at boot with a false positive error check. Fix that and simplify error handling by moving the check to the caller. Fixes: 9b081e10805cd ("powerpc: port 64 bits pgtable_cache to 32 bits") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman --- arch/powerpc/mm/hugetlbpage.c | 6 +----- arch/powerpc/mm/init-common.c | 13 +++++-------- 2 files changed, 6 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 289df38fb7e0..f21f6b907d99 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -810,12 +810,8 @@ static int __init hugetlbpage_init(void) * if we have pdshift and shift value same, we don't * use pgt cache for hugepd. */ - if (pdshift > shift) { + if (pdshift > shift) pgtable_cache_add(pdshift - shift, NULL); - if (!PGT_CACHE(pdshift - shift)) - panic("hugetlbpage_init(): could not create " - "pgtable cache for %d bit pagesize\n", shift); - } #if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_8xx) else if (!hugepte_cache) { /* diff --git a/arch/powerpc/mm/init-common.c b/arch/powerpc/mm/init-common.c index a175cd82ae8c..f2108c40e697 100644 --- a/arch/powerpc/mm/init-common.c +++ b/arch/powerpc/mm/init-common.c @@ -78,8 +78,12 @@ void pgtable_cache_add(unsigned shift, void (*ctor)(void *)) align = max_t(unsigned long, align, minalign); name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift); new = kmem_cache_create(name, table_size, align, 0, ctor); + if (!new) + panic("Could not allocate pgtable cache for order %d", shift); + kfree(name); pgtable_cache[shift - 1] = new; + pr_debug("Allocated pgtable cache for order %d\n", shift); } @@ -88,7 +92,7 @@ void pgtable_cache_init(void) { pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor); - if (PMD_INDEX_SIZE && !PGT_CACHE(PMD_INDEX_SIZE)) + if (PMD_CACHE_INDEX && !PGT_CACHE(PMD_CACHE_INDEX)) pgtable_cache_add(PMD_CACHE_INDEX, pmd_ctor); /* * In all current configs, when the PUD index exists it's the @@ -97,11 +101,4 @@ void pgtable_cache_init(void) */ if (PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE)) pgtable_cache_add(PUD_INDEX_SIZE, pud_ctor); - - if (!PGT_CACHE(PGD_INDEX_SIZE)) - panic("Couldn't allocate pgd cache"); - if (PMD_INDEX_SIZE && !PGT_CACHE(PMD_INDEX_SIZE)) - panic("Couldn't allocate pmd pgtable caches"); - if (PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE)) - panic("Couldn't allocate pud pgtable caches"); } From ff8b85796dad5de869dc29903c95664fb444bbcc Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 13 Dec 2016 19:34:11 +0530 Subject: [PATCH 554/645] powerpc/mm/hugetlb: Don't panic when we don't find the default huge page size The generic hugetlbfs code can handle not finding the default huge page size correctly. With HPAGE_SHIFT = 0 we see in dmesg: hugetlbfs: disabling because there are no supported hugepage sizes bash-4.2# echo 30 > /proc/sys/vm/nr_hugepages bash: echo: write error: Operation not supported Fixes: 03bb2d65900c ("powerpc: get hugetlbpage handling more generic") Reported-by: Chris Smart Signed-off-by: Aneesh Kumar K.V Acked-by: Michael Neuling Signed-off-by: Michael Ellerman --- arch/powerpc/mm/hugetlbpage.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index f21f6b907d99..8797df11c51f 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -848,9 +848,6 @@ static int __init hugetlbpage_init(void) else if (mmu_psize_defs[MMU_PAGE_2M].shift) HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_2M].shift; #endif - else - panic("%s: Unable to set default huge page size\n", __func__); - return 0; } From 20717e1ff52672e31f9399c45d88936bbbc7e175 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 14 Dec 2016 10:07:53 +0530 Subject: [PATCH 555/645] powerpc/mm: Fix little-endian 4K hugetlb When we switched to big endian page table, we never updated the hugepd format such that it can work for both big endian and little endian config. This patch series update hugepd format such that it is looked at as __be64 value in big endian page table config. This patch also switch hugepd_t.pd from signed long to unsigned long. I did update the FSL hugepd_ok check to check for the top bit instead of checking > 0. Fixes: 5dc1ef858c12 ("powerpc/mm: Use big endian Linux page tables for book3s 64") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/book3s/64/hash-4k.h | 5 +++-- arch/powerpc/include/asm/hugetlb.h | 14 +++++++------ arch/powerpc/include/asm/nohash/pgtable.h | 5 +++-- arch/powerpc/include/asm/page.h | 3 --- arch/powerpc/include/asm/pgtable-be-types.h | 8 +++++++ arch/powerpc/include/asm/pgtable-types.h | 7 +++++++ arch/powerpc/mm/hugetlbpage-hash64.c | 5 ++++- arch/powerpc/mm/hugetlbpage.c | 22 ++++++++++---------- 8 files changed, 44 insertions(+), 25 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h index 1c64bc6330bc..0c4e470571ca 100644 --- a/arch/powerpc/include/asm/book3s/64/hash-4k.h +++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h @@ -36,12 +36,13 @@ #ifdef CONFIG_HUGETLB_PAGE static inline int hash__hugepd_ok(hugepd_t hpd) { + unsigned long hpdval = hpd_val(hpd); /* * if it is not a pte and have hugepd shift mask * set, then it is a hugepd directory pointer */ - if (!(hpd.pd & _PAGE_PTE) && - ((hpd.pd & HUGEPD_SHIFT_MASK) != 0)) + if (!(hpdval & _PAGE_PTE) && + ((hpdval & HUGEPD_SHIFT_MASK) != 0)) return true; return false; } diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h index ede215167d1a..7f4025a6c69e 100644 --- a/arch/powerpc/include/asm/hugetlb.h +++ b/arch/powerpc/include/asm/hugetlb.h @@ -21,12 +21,12 @@ static inline pte_t *hugepd_page(hugepd_t hpd) * We have only four bits to encode, MMU page size */ BUILD_BUG_ON((MMU_PAGE_COUNT - 1) > 0xf); - return __va(hpd.pd & HUGEPD_ADDR_MASK); + return __va(hpd_val(hpd) & HUGEPD_ADDR_MASK); } static inline unsigned int hugepd_mmu_psize(hugepd_t hpd) { - return (hpd.pd & HUGEPD_SHIFT_MASK) >> 2; + return (hpd_val(hpd) & HUGEPD_SHIFT_MASK) >> 2; } static inline unsigned int hugepd_shift(hugepd_t hpd) @@ -52,18 +52,20 @@ static inline pte_t *hugepd_page(hugepd_t hpd) { BUG_ON(!hugepd_ok(hpd)); #ifdef CONFIG_PPC_8xx - return (pte_t *)__va(hpd.pd & ~(_PMD_PAGE_MASK | _PMD_PRESENT_MASK)); + return (pte_t *)__va(hpd_val(hpd) & + ~(_PMD_PAGE_MASK | _PMD_PRESENT_MASK)); #else - return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | PD_HUGE); + return (pte_t *)((hpd_val(hpd) & + ~HUGEPD_SHIFT_MASK) | PD_HUGE); #endif } static inline unsigned int hugepd_shift(hugepd_t hpd) { #ifdef CONFIG_PPC_8xx - return ((hpd.pd & _PMD_PAGE_MASK) >> 1) + 17; + return ((hpd_val(hpd) & _PMD_PAGE_MASK) >> 1) + 17; #else - return hpd.pd & HUGEPD_SHIFT_MASK; + return hpd_val(hpd) & HUGEPD_SHIFT_MASK; #endif } diff --git a/arch/powerpc/include/asm/nohash/pgtable.h b/arch/powerpc/include/asm/nohash/pgtable.h index 172849727054..0cd8a3852763 100644 --- a/arch/powerpc/include/asm/nohash/pgtable.h +++ b/arch/powerpc/include/asm/nohash/pgtable.h @@ -227,9 +227,10 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, static inline int hugepd_ok(hugepd_t hpd) { #ifdef CONFIG_PPC_8xx - return ((hpd.pd & 0x4) != 0); + return ((hpd_val(hpd) & 0x4) != 0); #else - return (hpd.pd > 0); + /* We clear the top bit to indicate hugepd */ + return ((hpd_val(hpd) & PD_HUGE) == 0); #endif } diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 56398e7e6100..47120bf2670c 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -294,15 +294,12 @@ extern long long virt_phys_offset; #include #endif -typedef struct { signed long pd; } hugepd_t; #ifndef CONFIG_HUGETLB_PAGE #define is_hugepd(pdep) (0) #define pgd_huge(pgd) (0) #endif /* CONFIG_HUGETLB_PAGE */ -#define __hugepd(x) ((hugepd_t) { (x) }) - struct page; extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); extern void copy_user_page(void *to, void *from, unsigned long vaddr, diff --git a/arch/powerpc/include/asm/pgtable-be-types.h b/arch/powerpc/include/asm/pgtable-be-types.h index 49c0a5a80efa..9c0f5db5cf46 100644 --- a/arch/powerpc/include/asm/pgtable-be-types.h +++ b/arch/powerpc/include/asm/pgtable-be-types.h @@ -104,4 +104,12 @@ static inline bool pmd_xchg(pmd_t *pmdp, pmd_t old, pmd_t new) return pmd_raw(old) == prev; } +typedef struct { __be64 pdbe; } hugepd_t; +#define __hugepd(x) ((hugepd_t) { cpu_to_be64(x) }) + +static inline unsigned long hpd_val(hugepd_t x) +{ + return be64_to_cpu(x.pdbe); +} + #endif /* _ASM_POWERPC_PGTABLE_BE_TYPES_H */ diff --git a/arch/powerpc/include/asm/pgtable-types.h b/arch/powerpc/include/asm/pgtable-types.h index e7f4f3e0fcde..8bd3b13fe2fb 100644 --- a/arch/powerpc/include/asm/pgtable-types.h +++ b/arch/powerpc/include/asm/pgtable-types.h @@ -66,4 +66,11 @@ static inline bool pte_xchg(pte_t *ptep, pte_t old, pte_t new) } #endif +typedef struct { unsigned long pd; } hugepd_t; +#define __hugepd(x) ((hugepd_t) { (x) }) +static inline unsigned long hpd_val(hugepd_t x) +{ + return x.pd; +} + #endif /* _ASM_POWERPC_PGTABLE_TYPES_H */ diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c index d5026f3800b6..37b5f91e381b 100644 --- a/arch/powerpc/mm/hugetlbpage-hash64.c +++ b/arch/powerpc/mm/hugetlbpage-hash64.c @@ -125,11 +125,14 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid, int hugepd_ok(hugepd_t hpd) { bool is_hugepd; + unsigned long hpdval; + + hpdval = hpd_val(hpd); /* * We should not find this format in page directory, warn otherwise. */ - is_hugepd = (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0)); + is_hugepd = (((hpdval & 0x3) == 0x0) && ((hpdval & HUGEPD_SHIFT_MASK) != 0)); WARN(is_hugepd, "Found wrong page directory format\n"); return 0; } diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 8797df11c51f..8c3389cbcd12 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -53,7 +53,7 @@ static u64 gpage_freearray[MAX_NUMBER_GPAGES]; static unsigned nr_gpages; #endif -#define hugepd_none(hpd) ((hpd).pd == 0) +#define hugepd_none(hpd) (hpd_val(hpd) == 0) pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { @@ -103,24 +103,24 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, for (i = 0; i < num_hugepd; i++, hpdp++) { if (unlikely(!hugepd_none(*hpdp))) break; - else + else { #ifdef CONFIG_PPC_BOOK3S_64 - hpdp->pd = __pa(new) | - (shift_to_mmu_psize(pshift) << 2); + *hpdp = __hugepd(__pa(new) | + (shift_to_mmu_psize(pshift) << 2)); #elif defined(CONFIG_PPC_8xx) - hpdp->pd = __pa(new) | - (pshift == PAGE_SHIFT_8M ? _PMD_PAGE_8M : - _PMD_PAGE_512K) | - _PMD_PRESENT; + *hpdp = __hugepd(__pa(new) | + (pshift == PAGE_SHIFT_8M ? _PMD_PAGE_8M : + _PMD_PAGE_512K) | _PMD_PRESENT); #else /* We use the old format for PPC_FSL_BOOK3E */ - hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift; + *hpdp = __hugepd(((unsigned long)new & ~PD_HUGE) | pshift); #endif + } } /* If we bailed from the for loop early, an error occurred, clean up */ if (i < num_hugepd) { for (i = i - 1 ; i >= 0; i--, hpdp--) - hpdp->pd = 0; + *hpdp = __hugepd(0); kmem_cache_free(cachep, new); } spin_unlock(&mm->page_table_lock); @@ -454,7 +454,7 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif return; for (i = 0; i < num_hugepd; i++, hpdp++) - hpdp->pd = 0; + *hpdp = __hugepd(0); if (shift >= pdshift) hugepd_free(tlb, hugepte); From d89f473ff6f84872e761419f7233d6e00f99c340 Mon Sep 17 00:00:00 2001 From: Madhavan Srinivasan Date: Mon, 9 Jan 2017 19:00:15 +0530 Subject: [PATCH 556/645] powerpc/perf: Fix PM_BRU_CMPL event code for power9 Use 0x10012 event code for PM_BRU_CMPL event in power9 event list instead of current 0x40060. Fixes: 34922527a2bcb ('powerpc/perf: Add power9 event list macros for generic and cache events') Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman --- arch/powerpc/perf/power9-events-list.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/perf/power9-events-list.h b/arch/powerpc/perf/power9-events-list.h index 6447dc1c3d89..929b56d47ad9 100644 --- a/arch/powerpc/perf/power9-events-list.h +++ b/arch/powerpc/perf/power9-events-list.h @@ -16,7 +16,7 @@ EVENT(PM_CYC, 0x0001e) EVENT(PM_ICT_NOSLOT_CYC, 0x100f8) EVENT(PM_CMPLU_STALL, 0x1e054) EVENT(PM_INST_CMPL, 0x00002) -EVENT(PM_BRU_CMPL, 0x40060) +EVENT(PM_BRU_CMPL, 0x10012) EVENT(PM_BR_MPRED_CMPL, 0x400f6) /* All L1 D cache load references counted at finish, gated by reject */ From 387bbc974f6adf91aa635090f73434ed10edd915 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Fri, 6 Jan 2017 10:39:49 +1100 Subject: [PATCH 557/645] powerpc/eeh: Enable IO path on permanent error We give up recovery on permanent error, simply shutdown the affected devices and remove them. If the devices can't be put into quiet state, they spew more traffic that is likely to cause another unexpected EEH error. This was observed on "p8dtu2u" machine: 0002:00:00.0 PCI bridge: IBM Device 03dc 0002:01:00.0 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.1 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.2 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.3 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) On P8 PowerNV platform, the IO path is frozen when shutdowning the devices, meaning the memory registers are inaccessible. It is why the devices can't be put into quiet state before removing them. This fixes the issue by enabling IO path prior to putting the devices into quiet state. Reported-by: Pridhiviraj Paidipeddi Signed-off-by: Gavin Shan Acked-by: Russell Currey Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/eeh.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 8180bfd7ab93..9de7f79e702b 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -298,9 +298,17 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity) * * For pHyp, we have to enable IO for log retrieval. Otherwise, * 0xFF's is always returned from PCI config space. + * + * When the @severity is EEH_LOG_PERM, the PE is going to be + * removed. Prior to that, the drivers for devices included in + * the PE will be closed. The drivers rely on working IO path + * to bring the devices to quiet state. Otherwise, PCI traffic + * from those devices after they are removed is like to cause + * another unexpected EEH error. */ if (!(pe->type & EEH_PE_PHB)) { - if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG)) + if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG) || + severity == EEH_LOG_PERM) eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); /* From df21d2fa733035e4d414379960f94b2516b41296 Mon Sep 17 00:00:00 2001 From: Madhavan Srinivasan Date: Mon, 19 Dec 2016 17:46:53 +0530 Subject: [PATCH 558/645] selftest/powerpc: Wrong PMC initialized in pmc56_overflow test Test uses PMC2 to count the event. But PMC1 is being initialized. Patch to fix it. Fixes: 3752e453f6ba ('selftests/powerpc: Add tests of PMU EBBs') Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman --- tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c index c22860ab9733..30e1ac62e8cb 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c @@ -66,7 +66,7 @@ int pmc56_overflow(void) FAIL_IF(ebb_event_enable(&event)); - mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + mtspr(SPRN_PMC2, pmc_sample_period(sample_period)); mtspr(SPRN_PMC5, 0); mtspr(SPRN_PMC6, 0); From 27593d72c4ad451ed13af35354b941bcd0abcec6 Mon Sep 17 00:00:00 2001 From: Madhavan Srinivasan Date: Wed, 18 Jan 2017 09:12:56 +0530 Subject: [PATCH 559/645] powerpc/perf: Use MSR to report privilege level on P9 DD1 SIER and SIAR are not updated correctly for some samples, so force the use of MSR and regs->nip instead for misc_flag updates. This is done by adding a new ppmu flag and updating the use_siar logic in perf_read_regs() to use it, and dropping the PPMU_HAS_SIER flag. Signed-off-by: Madhavan Srinivasan [mpe: Rename flag to PPMU_NO_SIAR, and also drop PPMU_HAS_SIER] Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/perf_event_server.h | 1 + arch/powerpc/perf/core-book3s.c | 2 ++ arch/powerpc/perf/power9-pmu.c | 2 +- 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h index e157489ee7a1..ae0a23091a9b 100644 --- a/arch/powerpc/include/asm/perf_event_server.h +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -65,6 +65,7 @@ struct power_pmu { #define PPMU_HAS_SSLOT 0x00000020 /* Has sampled slot in MMCRA */ #define PPMU_HAS_SIER 0x00000040 /* Has SIER */ #define PPMU_ARCH_207S 0x00000080 /* PMC is architecture v2.07S */ +#define PPMU_NO_SIAR 0x00000100 /* Do not use SIAR */ /* * Values for flags to get_alternatives() diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index fd3e4034c04d..270eb9b74e2e 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -295,6 +295,8 @@ static inline void perf_read_regs(struct pt_regs *regs) */ if (TRAP(regs) != 0xf00) use_siar = 0; + else if ((ppmu->flags & PPMU_NO_SIAR)) + use_siar = 0; else if (marked) use_siar = 1; else if ((ppmu->flags & PPMU_NO_CONT_SAMPLING)) diff --git a/arch/powerpc/perf/power9-pmu.c b/arch/powerpc/perf/power9-pmu.c index 346010e8d463..7332634e18c9 100644 --- a/arch/powerpc/perf/power9-pmu.c +++ b/arch/powerpc/perf/power9-pmu.c @@ -384,7 +384,7 @@ static struct power_pmu power9_isa207_pmu = { .bhrb_filter_map = power9_bhrb_filter_map, .get_constraint = isa207_get_constraint, .disable_pmc = isa207_disable_pmc, - .flags = PPMU_HAS_SIER | PPMU_ARCH_207S, + .flags = PPMU_NO_SIAR | PPMU_ARCH_207S, .n_generic = ARRAY_SIZE(power9_generic_events), .generic_events = power9_generic_events, .cache_events = &power9_cache_events, From 0fec9557fd0c5349e3bd1a2141612a60bc20bb71 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 17 Jan 2017 15:35:01 +0100 Subject: [PATCH 560/645] cpu/hotplug: Remove unused but set variable in _cpu_down() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After the recent removal of the hotplug notifiers the variable 'hasdied' in _cpu_down() is set but no longer read, leading to the following GCC warning when building with 'make W=1': kernel/cpu.c:767:7: warning: variable ‘hasdied’ set but not used [-Wunused-but-set-variable] Fix it by removing the variable. Fixes: 530e9b76ae8f ("cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions") Signed-off-by: Tobias Klauser Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20170117143501.20893-1-tklauser@distanz.ch Signed-off-by: Thomas Gleixner --- kernel/cpu.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/cpu.c b/kernel/cpu.c index c47506357519..0a5f630f5c54 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -764,7 +764,6 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen, { struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); int prev_state, ret = 0; - bool hasdied = false; if (num_online_cpus() == 1) return -EBUSY; @@ -809,7 +808,6 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen, cpuhp_kick_ap_work(cpu); } - hasdied = prev_state != st->state && st->state == CPUHP_OFFLINE; out: cpu_hotplug_done(); return ret; From 1c8a946bf3754a59cba1fc373949a8114bfe5aaa Mon Sep 17 00:00:00 2001 From: Oleksandr Andrushchenko Date: Wed, 18 Jan 2017 09:09:25 +0200 Subject: [PATCH 561/645] arm64: mm: avoid name clash in __page_to_voff() The arm64 __page_to_voff() macro takes a parameter called 'page', and also refers to 'struct page'. Thus, if the value passed in is not called 'page', we'll refer to the wrong struct name (which might not exist). Fixes: 3fa72fe9c614 ("arm64: mm: fix __page_to_voff definition") Acked-by: Mark Rutland Suggested-by: Volodymyr Babchuk Signed-off-by: Oleksandr Andrushchenko Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/memory.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index bfe632808d77..90c39a662379 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -222,7 +222,7 @@ static inline void *phys_to_virt(phys_addr_t x) #define _virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #else #define __virt_to_pgoff(kaddr) (((u64)(kaddr) & ~PAGE_OFFSET) / PAGE_SIZE * sizeof(struct page)) -#define __page_to_voff(page) (((u64)(page) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page)) +#define __page_to_voff(kaddr) (((u64)(kaddr) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page)) #define page_to_virt(page) ((void *)((__page_to_voff(page)) | PAGE_OFFSET)) #define virt_to_page(vaddr) ((struct page *)((__virt_to_pgoff(vaddr)) | VMEMMAP_START)) From 4c7d0c9cb713a28b133b265d595de2a93ee09712 Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Wed, 18 Jan 2017 15:19:54 +0100 Subject: [PATCH 562/645] ovl: fix possible use after free on redirect dir lookup ovl_lookup_layer() iterates on path elements of d->name.name but also frees and allocates a new pointer for d->name.name. For the case of lookup in upper layer, the initial d->name.name pointer is stable (dentry->d_name), but for lower layers, the initial d->name.name can be d->redirect, which can be freed during iteration. [SzM] Keep the count of remaining characters in the redirect path and calculate the current position from that. This works becuase only the prefix is modified, the ending always stays the same. Fixes: 02b69b284cd7 ("ovl: lookup redirects") Signed-off-by: Amir Goldstein Signed-off-by: Miklos Szeredi --- fs/overlayfs/namei.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c index 9ad48d9202a9..023bb0b03352 100644 --- a/fs/overlayfs/namei.c +++ b/fs/overlayfs/namei.c @@ -154,29 +154,38 @@ out_err: static int ovl_lookup_layer(struct dentry *base, struct ovl_lookup_data *d, struct dentry **ret) { - const char *s = d->name.name; + /* Counting down from the end, since the prefix can change */ + size_t rem = d->name.len - 1; struct dentry *dentry = NULL; int err; - if (*s != '/') + if (d->name.name[0] != '/') return ovl_lookup_single(base, d, d->name.name, d->name.len, 0, "", ret); - while (*s++ == '/' && !IS_ERR_OR_NULL(base) && d_can_lookup(base)) { + while (!IS_ERR_OR_NULL(base) && d_can_lookup(base)) { + const char *s = d->name.name + d->name.len - rem; const char *next = strchrnul(s, '/'); - size_t slen = strlen(s); + size_t thislen = next - s; + bool end = !next[0]; - if (WARN_ON(slen > d->name.len) || - WARN_ON(strcmp(d->name.name + d->name.len - slen, s))) + /* Verify we did not go off the rails */ + if (WARN_ON(s[-1] != '/')) return -EIO; - err = ovl_lookup_single(base, d, s, next - s, - d->name.len - slen, next, &base); + err = ovl_lookup_single(base, d, s, thislen, + d->name.len - rem, next, &base); dput(dentry); if (err) return err; dentry = base; - s = next; + if (end) + break; + + rem -= thislen + 1; + + if (WARN_ON(rem >= d->name.len)) + return -EIO; } *ret = dentry; return 0; From 4fc020d864647ea3ae8cb8f17d63e48e87ebd0bf Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Thu, 12 Jan 2017 12:44:54 +0200 Subject: [PATCH 563/645] drm/i915: Remove WaDisableLSQCROPERFforOCL KBL workaround. The WaDisableLSQCROPERFforOCL workaround has the side effect of disabling an L3SQ optimization that has huge performance implications and is unlikely to be necessary for the correct functioning of usual graphic workloads. Userspace is free to re-enable the workaround on demand, and is generally in a better position to determine whether the workaround is necessary than the DRM is (e.g. only during the execution of compute kernels that rely on both L3 fences and HDC R/W requests). The same workaround seems to apply to BDW (at least to production stepping G1) and SKL as well (the internal workaround database claims that it does for all steppings, while the BSpec workaround table only mentions pre-production steppings), but the DRM doesn't do anything beyond whitelisting the L3SQCREG4 register so userspace can enable it when it sees fit. Do the same on KBL platforms. Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%, and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master -- This is followed by a regression of 35% and 10% respectively for the same benchmarks and platform caused by my recent patch series switching userspace to use the dataport constant cache instead of the sampler to implement uniform pull constant loads, which caused us to hit more heavily the L3 cache (and on platforms other than KBL had the opposite effect of improving performance of the same two benchmarks). The overall effect on KBL of this change combined with the recent userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf was affected by the constant cache changes (though it improved as it did on other platforms rather than regressing), but is not significantly affected by this patch (with statistical significance of 5% and sample size 20). v2: Drop some more code to avoid unused variable warning. Fixes: 738fa1b3123f ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256 Signed-off-by: Francisco Jerez Cc: Matthew Auld Cc: Eero Tamminen Cc: Jani Nikula Cc: Mika Kuoppala Cc: beignet@lists.freedesktop.org Cc: # v4.7+ Reviewed-by: Mika Kuoppala [Removed double Fixes tag] Signed-off-by: Mika Kuoppala Link: http://patchwork.freedesktop.org/patch/msgid/1484217894-20505-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 8726f2faa371514fba2f594d799db95203dfeee0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_lrc.c | 10 ---------- drivers/gpu/drm/i915/intel_ringbuffer.c | 8 -------- 2 files changed, 18 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index d4961fa20c73..beabc17e7c8a 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -979,18 +979,8 @@ static inline int gen8_emit_flush_coherentl3_wa(struct intel_engine_cs *engine, uint32_t *batch, uint32_t index) { - struct drm_i915_private *dev_priv = engine->i915; uint32_t l3sqc4_flush = (0x40400000 | GEN8_LQSC_FLUSH_COHERENT_LINES); - /* - * WaDisableLSQCROPERFforOCL:kbl - * This WA is implemented in skl_init_clock_gating() but since - * this batch updates GEN8_L3SQCREG4 with default value we need to - * set this bit here to retain the WA during flush. - */ - if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_E0)) - l3sqc4_flush |= GEN8_LQSC_RO_PERF_DIS; - wa_ctx_emit(batch, index, (MI_STORE_REGISTER_MEM_GEN8 | MI_SRM_LRM_GLOBAL_GTT)); wa_ctx_emit_reg(batch, index, GEN8_L3SQCREG4); diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index aeb637dc1fdf..91cb4c422ad5 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1095,14 +1095,6 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) WA_SET_BIT_MASKED(HDC_CHICKEN0, HDC_FENCE_DEST_SLM_DISABLE); - /* GEN8_L3SQCREG4 has a dependency with WA batch so any new changes - * involving this register should also be added to WA batch as required. - */ - if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_E0)) - /* WaDisableLSQCROPERFforOCL:kbl */ - I915_WRITE(GEN8_L3SQCREG4, I915_READ(GEN8_L3SQCREG4) | - GEN8_LQSC_RO_PERF_DIS); - /* WaToEnableHwFixForPushConstHWBug:kbl */ if (IS_KBL_REVID(dev_priv, KBL_REVID_C0, REVID_FOREVER)) WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, From 3bfdfdcbce2796ce75bf2d85fd8471858d702e5d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 7 Nov 2016 22:20:54 +0200 Subject: [PATCH 564/645] drm/i915: Ignore bogus plane coordinates on SKL when the plane is not visible MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the plane is invisible we may have all sorts of bogus stuff in the coordinates, which we must ignore or else we might fail the plane update. This started to happen on SKL when I moved the plane offset computation to happen in the check phase. Previously we happily ignored it all since we never called the update_plane hook with an invisible plane. Cc: Sivakumar Thulasimani Cc: drm-intel-fixes@lists.freedesktop.org Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98258 Testcase: igt/pm_rpm/legacy-planes Testcase: igt/pm_rpm/universal-planes Reviewed-by: Matt Roper Signed-off-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-3-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit a5e4c7d0aa6784d8abe95c3ceef0da9656d17468) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3dc8724df400..8d702cf1a616 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2967,6 +2967,9 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state) unsigned int rotation = plane_state->base.rotation; int ret; + if (!plane_state->base.visible) + return 0; + /* Rotate src coordinates to match rotated GTT view */ if (drm_rotation_90_or_270(rotation)) drm_rect_rotate(&plane_state->base.src, From 020eb3daaba2857b32c4cf4c82f503d6a00a67de Mon Sep 17 00:00:00 2001 From: Ruslan Ruslichenko Date: Tue, 17 Jan 2017 16:13:52 +0200 Subject: [PATCH 565/645] x86/ioapic: Restore IO-APIC irq_chip retrigger callback commit d32932d02e18 removed the irq_retrigger callback from the IO-APIC chip and did not add it to the new IO-APIC-IR irq chip. Unfortunately the software resend fallback is not enabled on X86, so edge interrupts which are received during the lazy disabled state of the interrupt line are not retriggered and therefor lost. Restore the callbacks. [ tglx: Massaged changelog ] Fixes: d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") Signed-off-by: Ruslan Ruslichenko Cc: xe-linux-external@cisco.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1484662432-13580-1-git-send-email-rruslich@cisco.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic/io_apic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 945e512a112a..1e35dd06b090 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1875,6 +1875,7 @@ static struct irq_chip ioapic_chip __read_mostly = { .irq_ack = irq_chip_ack_parent, .irq_eoi = ioapic_ack_level, .irq_set_affinity = ioapic_set_affinity, + .irq_retrigger = irq_chip_retrigger_hierarchy, .flags = IRQCHIP_SKIP_SET_WAKE, }; @@ -1886,6 +1887,7 @@ static struct irq_chip ioapic_ir_chip __read_mostly = { .irq_ack = irq_chip_ack_parent, .irq_eoi = ioapic_ir_ack_level, .irq_set_affinity = ioapic_set_affinity, + .irq_retrigger = irq_chip_retrigger_hierarchy, .flags = IRQCHIP_SKIP_SET_WAKE, }; From 6e09d0fb64402cec579f029ca4c7f39f5c48fc60 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Thu, 22 Dec 2016 16:05:43 +0800 Subject: [PATCH 566/645] ceph: fix ceph_get_caps() interruption Commit 5c341ee32881 ("ceph: fix scheduler warning due to nested blocking") causes infinite loop when process is interrupted. Fix it. Signed-off-by: Yan, Zheng Signed-off-by: Ilya Dryomov --- fs/ceph/caps.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index baea866a6751..94fd76d04683 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -2591,8 +2591,13 @@ int ceph_get_caps(struct ceph_inode_info *ci, int need, int want, add_wait_queue(&ci->i_cap_wq, &wait); while (!try_get_cap_refs(ci, need, want, endoff, - true, &_got, &err)) + true, &_got, &err)) { + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT); + } remove_wait_queue(&ci->i_cap_wq, &wait); From 124f930b8cbc4ac11236e6eb1c5f008318864588 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 16 Jan 2017 19:16:46 +0100 Subject: [PATCH 567/645] libceph: make sure ceph_aes_crypt() IV is aligned ... otherwise the crypto stack will align it for us with a GFP_ATOMIC allocation and a memcpy() -- see skcipher_walk_first(). Signed-off-by: Ilya Dryomov --- net/ceph/crypto.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ceph/crypto.c b/net/ceph/crypto.c index 3949ce70be07..292e33bd916e 100644 --- a/net/ceph/crypto.c +++ b/net/ceph/crypto.c @@ -214,7 +214,7 @@ static int ceph_aes_crypt(const struct ceph_crypto_key *key, bool encrypt, SKCIPHER_REQUEST_ON_STACK(req, key->tfm); struct sg_table sgt; struct scatterlist prealloc_sg; - char iv[AES_BLOCK_SIZE]; + char iv[AES_BLOCK_SIZE] __aligned(8); int pad_byte = AES_BLOCK_SIZE - (in_len & (AES_BLOCK_SIZE - 1)); int crypt_len = encrypt ? in_len + pad_byte : in_len; int ret; From 1097680d759918ce4a8705381c0ab2ed7bd60cf1 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 12 Jan 2017 14:42:38 -0500 Subject: [PATCH 568/645] ceph: fix endianness of getattr mask in ceph_d_revalidate sparse says: fs/ceph/dir.c:1248:50: warning: incorrect type in assignment (different base types) fs/ceph/dir.c:1248:50: expected restricted __le32 [usertype] mask fs/ceph/dir.c:1248:50: got int [signed] [assigned] mask Fixes: 200fd27c8fa2 ("ceph: use lookup request to revalidate dentry") Signed-off-by: Jeff Layton Reviewed-by: Sage Weil Signed-off-by: Ilya Dryomov --- fs/ceph/dir.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index d7a93696663b..8ab1fdf0bd49 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -1230,7 +1230,8 @@ static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags) struct ceph_mds_client *mdsc = ceph_sb_to_client(dir->i_sb)->mdsc; struct ceph_mds_request *req; - int op, mask, err; + int op, err; + u32 mask; if (flags & LOOKUP_RCU) return -ECHILD; @@ -1245,7 +1246,7 @@ static int ceph_d_revalidate(struct dentry *dentry, unsigned int flags) mask = CEPH_STAT_CAP_INODE | CEPH_CAP_AUTH_SHARED; if (ceph_security_xattr_wanted(dir)) mask |= CEPH_CAP_XATTR_SHARED; - req->r_args.getattr.mask = mask; + req->r_args.getattr.mask = cpu_to_le32(mask); err = ceph_mdsc_do_request(mdsc, NULL, req); switch (err) { From fe2ed42517533068ac03eed5630fffafff27eacf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 12 Jan 2017 14:42:39 -0500 Subject: [PATCH 569/645] ceph: fix endianness bug in frag_tree_split_cmp sparse says: fs/ceph/inode.c:308:36: warning: incorrect type in argument 1 (different base types) fs/ceph/inode.c:308:36: expected unsigned int [unsigned] [usertype] a fs/ceph/inode.c:308:36: got restricted __le32 [usertype] frag fs/ceph/inode.c:308:46: warning: incorrect type in argument 2 (different base types) fs/ceph/inode.c:308:46: expected unsigned int [unsigned] [usertype] b fs/ceph/inode.c:308:46: got restricted __le32 [usertype] frag We need to convert these values to host-endian before calling the comparator. Fixes: a407846ef7c6 ("ceph: don't assume frag tree splits in mds reply are sorted") Signed-off-by: Jeff Layton Reviewed-by: Sage Weil Signed-off-by: Ilya Dryomov --- fs/ceph/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 398e5328b309..5e659d054b40 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -305,7 +305,8 @@ static int frag_tree_split_cmp(const void *l, const void *r) { struct ceph_frag_tree_split *ls = (struct ceph_frag_tree_split*)l; struct ceph_frag_tree_split *rs = (struct ceph_frag_tree_split*)r; - return ceph_frag_compare(ls->frag, rs->frag); + return ceph_frag_compare(le32_to_cpu(ls->frag), + le32_to_cpu(rs->frag)); } static bool is_frag_child(u32 f, struct ceph_inode_frag *frag) From 6df8c9d80a27cb587f61b4f06b57e248d8bc3f86 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 12 Jan 2017 14:42:41 -0500 Subject: [PATCH 570/645] ceph: fix bad endianness handling in parse_reply_info_extra sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Cc: stable@vger.kernel.org # needs backporting for < 3.14 Signed-off-by: Jeff Layton Reviewed-by: Sage Weil Signed-off-by: Ilya Dryomov --- fs/ceph/mds_client.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index ec6b35e9f966..c9d2e553a6c4 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -288,12 +288,13 @@ static int parse_reply_info_extra(void **p, void *end, struct ceph_mds_reply_info_parsed *info, u64 features) { - if (info->head->op == CEPH_MDS_OP_GETFILELOCK) + u32 op = le32_to_cpu(info->head->op); + + if (op == CEPH_MDS_OP_GETFILELOCK) return parse_reply_info_filelock(p, end, info, features); - else if (info->head->op == CEPH_MDS_OP_READDIR || - info->head->op == CEPH_MDS_OP_LSSNAP) + else if (op == CEPH_MDS_OP_READDIR || op == CEPH_MDS_OP_LSSNAP) return parse_reply_info_dir(p, end, info, features); - else if (info->head->op == CEPH_MDS_OP_CREATE) + else if (op == CEPH_MDS_OP_CREATE) return parse_reply_info_create(p, end, info, features); else return -EIO; From 9a17b876b573441bfb3387ad55d98bf7184daf9d Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 18 Jan 2017 16:25:20 +0000 Subject: [PATCH 571/645] arm64/ptrace: Preserve previous registers for short regset write Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: # 3.7.x- Fixes: 478fcb2cdb23 ("arm64: Debugging support") Signed-off-by: Dave Martin Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/ptrace.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index fc35e06ccaac..8c0bc3434f55 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -596,7 +596,7 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset, const void *kbuf, const void __user *ubuf) { int ret; - struct user_pt_regs newregs; + struct user_pt_regs newregs = task_pt_regs(target)->user_regs; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newregs, 0, -1); if (ret) @@ -626,7 +626,8 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset, const void *kbuf, const void __user *ubuf) { int ret; - struct user_fpsimd_state newstate; + struct user_fpsimd_state newstate = + target->thread.fpsimd_state.user_fpsimd; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newstate, 0, -1); if (ret) @@ -650,7 +651,7 @@ static int tls_set(struct task_struct *target, const struct user_regset *regset, const void *kbuf, const void __user *ubuf) { int ret; - unsigned long tls; + unsigned long tls = target->thread.tp_value; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1); if (ret) From 9dd73f72f218320c6c90da5f834996e7360dc227 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 18 Jan 2017 16:25:21 +0000 Subject: [PATCH 572/645] arm64/ptrace: Preserve previous registers for short regset write Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: # 3.19.x- Fixes: 766a85d7bc5d ("arm64: ptrace: add NT_ARM_SYSTEM_CALL regset") Signed-off-by: Dave Martin Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/ptrace.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 8c0bc3434f55..ead36d5fad6d 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -677,7 +677,8 @@ static int system_call_set(struct task_struct *target, unsigned int pos, unsigned int count, const void *kbuf, const void __user *ubuf) { - int syscallno, ret; + int syscallno = task_pt_regs(target)->syscallno; + int ret; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &syscallno, 0, -1); if (ret) From a672401c00f82e4e19704aff361d9bad18003714 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 18 Jan 2017 16:25:22 +0000 Subject: [PATCH 573/645] arm64/ptrace: Preserve previous registers for short regset write Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: # 4.3.x- Fixes: 5d220ff9420f ("arm64: Better native ptrace support for compat tasks") Signed-off-by: Dave Martin Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index ead36d5fad6d..91c4719dfc00 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -950,7 +950,7 @@ static int compat_tls_set(struct task_struct *target, const void __user *ubuf) { int ret; - compat_ulong_t tls; + compat_ulong_t tls = target->thread.tp_value; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1); if (ret) From aeb1f39d814b2e21e5e5706a48834bfd553d0059 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 18 Jan 2017 16:25:23 +0000 Subject: [PATCH 574/645] arm64/ptrace: Avoid uninitialised struct padding in fpr_set() This patch adds an explicit __reserved[] field to user_fpsimd_state to replace what was previously unnamed padding. This ensures that data in this region are propagated across assignment rather than being left possibly uninitialised at the destination. Cc: # 3.7.x- Fixes: 60ffc30d5652 ("arm64: Exception handling") Signed-off-by: Dave Martin Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/uapi/asm/ptrace.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h index b5c3933ed441..d1ff83dfe5de 100644 --- a/arch/arm64/include/uapi/asm/ptrace.h +++ b/arch/arm64/include/uapi/asm/ptrace.h @@ -77,6 +77,7 @@ struct user_fpsimd_state { __uint128_t vregs[32]; __u32 fpsr; __u32 fpcr; + __u32 __reserved[2]; }; struct user_hwdebug_state { From ad9e202aa1ce571b1d7fed969d06f66067f8a086 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 18 Jan 2017 16:25:24 +0000 Subject: [PATCH 575/645] arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fields We cannot preserve partial fields for hardware breakpoints, because the values written by userspace to the hardware breakpoint registers can't subsequently be recovered intact from the hardware. So, just reject attempts to write incomplete fields with -EINVAL. Cc: # 3.7.x- Fixes: 478fcb2cdb23 ("arm64: Debugging support") Signed-off-by: Dave Martin Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/ptrace.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 91c4719dfc00..a22161ccf447 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -551,6 +551,8 @@ static int hw_break_set(struct task_struct *target, /* (address, ctrl) registers */ limit = regset->n * regset->size; while (count && offset < limit) { + if (count < PTRACE_HBP_ADDR_SZ) + return -EINVAL; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &addr, offset, offset + PTRACE_HBP_ADDR_SZ); if (ret) @@ -560,6 +562,8 @@ static int hw_break_set(struct task_struct *target, return ret; offset += PTRACE_HBP_ADDR_SZ; + if (!count) + break; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl, offset, offset + PTRACE_HBP_CTRL_SZ); if (ret) From eb1357d942e5d96de6b4c20a8ffa55acf96233a2 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 16 Jan 2017 10:48:09 -0800 Subject: [PATCH 576/645] ARC: module: Fix !CONFIG_ARC_DW2_UNWIND builds commit d65283f7b695b5 added mod->arch.secstr under CONFIG_ARC_DW2_UNWIND, but used it unconditionally which broke builds when the option was disabled. Fix that by adjusting the #ifdef guard. And while at it add a missing guard (for unwinder) in module.c as well Reported-by: Waldemar Brodkorb Cc: stable@vger.kernel.org #4.9 Fixes: d65283f7b695b5 ("ARC: module: elide loop to save reference to .eh_frame") Tested-by: Anton Kolesov Reviewed-by: Alexey Brodkin [abrodkin: provided fixlet to Kconfig per failure in allnoconfig build] Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 2 +- arch/arc/include/asm/module.h | 4 ++-- arch/arc/kernel/module.c | 4 +++- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index c75d29077e4a..283099c9560a 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -29,7 +29,7 @@ config ARC select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_MEMBLOCK - select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND + select HAVE_MOD_ARCH_SPECIFIC select HAVE_OPROFILE select HAVE_PERF_EVENTS select HANDLE_DOMAIN_IRQ diff --git a/arch/arc/include/asm/module.h b/arch/arc/include/asm/module.h index 6e91d8b339c3..567590ea8f6c 100644 --- a/arch/arc/include/asm/module.h +++ b/arch/arc/include/asm/module.h @@ -14,13 +14,13 @@ #include -#ifdef CONFIG_ARC_DW2_UNWIND struct mod_arch_specific { +#ifdef CONFIG_ARC_DW2_UNWIND void *unw_info; int unw_sec_idx; +#endif const char *secstr; }; -#endif #define MODULE_PROC_FAMILY "ARC700" diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c index 42e964db2967..3d99a6091332 100644 --- a/arch/arc/kernel/module.c +++ b/arch/arc/kernel/module.c @@ -32,8 +32,8 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, #ifdef CONFIG_ARC_DW2_UNWIND mod->arch.unw_sec_idx = 0; mod->arch.unw_info = NULL; - mod->arch.secstr = secstr; #endif + mod->arch.secstr = secstr; return 0; } @@ -113,8 +113,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, } +#ifdef CONFIG_ARC_DW2_UNWIND if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0) module->arch.unw_sec_idx = tgtsec; +#endif return 0; From fd29f7af75b7adf250beccffa63746c6a88e2b74 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 Jan 2017 12:39:21 -0800 Subject: [PATCH 577/645] xfs: fix xfs_mode_to_ftype() prototype A harmless warning just got introduced: fs/xfs/libxfs/xfs_dir2.h:40:8: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] Removing the 'const' modifier avoids the warning and has no other effect. Fixes: 1fc4d33fed12 ("xfs: replace xfs_mode_to_ftype table with switch statement") Signed-off-by: Arnd Bergmann Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_dir2.c | 2 +- fs/xfs/libxfs/xfs_dir2.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/libxfs/xfs_dir2.c b/fs/xfs/libxfs/xfs_dir2.c index eb64f3884d3d..2f389d366e93 100644 --- a/fs/xfs/libxfs/xfs_dir2.c +++ b/fs/xfs/libxfs/xfs_dir2.c @@ -38,7 +38,7 @@ struct xfs_name xfs_name_dotdot = { (unsigned char *)"..", 2, XFS_DIR3_FT_DIR }; /* * Convert inode mode to directory entry filetype */ -const unsigned char xfs_mode_to_ftype(int mode) +unsigned char xfs_mode_to_ftype(int mode) { switch (mode & S_IFMT) { case S_IFREG: diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h index d4b77ab37a98..d6e6d9d16f6c 100644 --- a/fs/xfs/libxfs/xfs_dir2.h +++ b/fs/xfs/libxfs/xfs_dir2.h @@ -37,7 +37,7 @@ extern struct xfs_name xfs_name_dotdot; /* * Convert inode mode to directory entry filetype */ -extern const unsigned char xfs_mode_to_ftype(int mode); +extern unsigned char xfs_mode_to_ftype(int mode); /* * directory operations vector for encode/decode routines From 88a7503376f4f3bf303c809d1a389739e1205614 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 18 Jan 2017 17:21:15 -0500 Subject: [PATCH 578/645] blk-mq: Remove unused variable Signed-off-by: Keith Busch Reviewed-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Jens Axboe --- block/blk-mq.c | 1 - 1 file changed, 1 deletion(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index a8e67a155d04..c3400b5444a7 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -912,7 +912,6 @@ bool blk_mq_dispatch_rq_list(struct blk_mq_hw_ctx *hctx, struct list_head *list) static void blk_mq_process_rq_list(struct blk_mq_hw_ctx *hctx) { LIST_HEAD(rq_list); - LIST_HEAD(driver_list); if (unlikely(blk_mq_hctx_stopped(hctx))) return; From d4911cdd3270da45d3a1c55bf28e88a932bbba7b Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 22 Jun 2016 15:43:22 +0530 Subject: [PATCH 579/645] ARCv2: IOC: refactor the IOC and SLC operations into own functions - Move IOC setup into arc_ioc_setup() - Move SLC disabling into arc_slc_disable() Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cache.h | 2 +- arch/arc/mm/cache.c | 68 +++++++++++++++++++++++++----------- 2 files changed, 48 insertions(+), 22 deletions(-) diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index b3410ff6a62d..5f924a1024fa 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -92,8 +92,8 @@ extern unsigned long perip_base, perip_end; #define ARC_REG_SLC_RGN_END 0x916 /* Bit val in SLC_CONTROL */ +#define SLC_CTRL_DIS 0x001 #define SLC_CTRL_IM 0x040 -#define SLC_CTRL_DISABLE 0x001 #define SLC_CTRL_BUSY 0x100 #define SLC_CTRL_RGN_OP_INV 0x200 diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 6d98e1d57a18..2c36370a1689 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -601,6 +601,40 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) #endif } +noinline static void slc_entire_op(const int op) +{ + unsigned int ctrl, r = ARC_REG_SLC_CTRL; + + ctrl = read_aux_reg(r); + + if (!(op & OP_FLUSH)) /* i.e. OP_INV */ + ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ + else + ctrl |= SLC_CTRL_IM; + + write_aux_reg(r, ctrl); + + write_aux_reg(ARC_REG_SLC_INVALIDATE, 1); + + /* Important to wait for flush to complete */ + while (read_aux_reg(r) & SLC_CTRL_BUSY); +} + +static inline void arc_slc_disable(void) +{ + const int r = ARC_REG_SLC_CTRL; + + slc_entire_op(OP_FLUSH_N_INV); + write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS); +} + +static inline void arc_slc_enable(void) +{ + const int r = ARC_REG_SLC_CTRL; + + write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS); +} + /*********************************************************** * Exported APIs */ @@ -927,6 +961,14 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) return 0; } +noinline void arc_ioc_setup(void) +{ + write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); + write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); + write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); + write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); +} + void arc_cache_init(void) { unsigned int __maybe_unused cpu = smp_processor_id(); @@ -989,30 +1031,14 @@ void arc_cache_init(void) } } - if (is_isa_arcv2() && l2_line_sz && !slc_enable) { + /* Note that SLC disable not formally supported till HS 3.0 */ + if (is_isa_arcv2() && l2_line_sz && !slc_enable) + arc_slc_disable(); - /* IM set : flush before invalidate */ - write_aux_reg(ARC_REG_SLC_CTRL, - read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM); - - write_aux_reg(ARC_REG_SLC_INVALIDATE, 1); - - /* Important to wait for flush to complete */ - while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY); - write_aux_reg(ARC_REG_SLC_CTRL, - read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE); - } + if (is_isa_arcv2() && ioc_enable) + arc_ioc_setup(); if (is_isa_arcv2() && ioc_enable) { - /* IO coherency base - 0x8z */ - write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); - /* IO coherency aperture size - 512Mb: 0x8z-0xAz */ - write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); - /* Enable partial writes */ - write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); - /* Enable IO coherency */ - write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); - __dma_cache_wback_inv = __dma_cache_wback_inv_ioc; __dma_cache_inv = __dma_cache_inv_ioc; __dma_cache_wback = __dma_cache_wback_ioc; From 8c47f83ba45928ce9495fcf1b29e828c28e3c839 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 22 Jun 2016 16:01:19 +0530 Subject: [PATCH 580/645] ARCv2: IOC: Adhere to progamming model guidelines to avoid DMA corruption On AXS103 release bitfiles, DMA data corruptions were seen because IOC setup was not following the recommended way in documentation. Flipping IOC on when caches are enabled or coherency transactions are in flight, might cause some of the memory operations to not observe coherency as expected. So strictly follow the programming model recommendations as documented in comment header above arc_ioc_setup() Signed-off-by: Vineet Gupta --- arch/arc/include/asm/cache.h | 7 +++--- arch/arc/mm/cache.c | 46 ++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 3 deletions(-) diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 5f924a1024fa..5008021fba98 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -67,7 +67,7 @@ extern unsigned long perip_base, perip_end; #define ARC_REG_IC_PTAG_HI 0x1F /* Bit val in IC_CTRL */ -#define IC_CTRL_CACHE_DISABLE 0x1 +#define IC_CTRL_DIS 0x1 /* Data cache related Auxiliary registers */ #define ARC_REG_DC_BCR 0x72 /* Build Config reg */ @@ -80,8 +80,9 @@ extern unsigned long perip_base, perip_end; #define ARC_REG_DC_PTAG_HI 0x5F /* Bit val in DC_CTRL */ -#define DC_CTRL_INV_MODE_FLUSH 0x40 -#define DC_CTRL_FLUSH_STATUS 0x100 +#define DC_CTRL_DIS 0x001 +#define DC_CTRL_INV_MODE_FLUSH 0x040 +#define DC_CTRL_FLUSH_STATUS 0x100 /*System-level cache (L2 cache) related Auxiliary registers */ #define ARC_REG_SLC_CFG 0x901 diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 2c36370a1689..1b4cda10844a 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -462,6 +462,21 @@ static inline void __dc_entire_op(const int op) __after_dc_op(op); } +static inline void __dc_disable(void) +{ + const int r = ARC_REG_DC_CTRL; + + __dc_entire_op(OP_FLUSH_N_INV); + write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS); +} + +static void __dc_enable(void) +{ + const int r = ARC_REG_DC_CTRL; + + write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS); +} + /* For kernel mappings cache operation: index is same as paddr */ #define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) @@ -487,6 +502,8 @@ static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr, #else #define __dc_entire_op(op) +#define __dc_disable() +#define __dc_enable() #define __dc_line_op(paddr, vaddr, sz, op) #define __dc_line_op_k(paddr, sz, op) @@ -961,12 +978,41 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) return 0; } +/* + * IO-Coherency (IOC) setup rules: + * + * 1. Needs to be at system level, so only once by Master core + * Non-Masters need not be accessing caches at that time + * - They are either HALT_ON_RESET and kick started much later or + * - if run on reset, need to ensure that arc_platform_smp_wait_to_boot() + * doesn't perturb caches or coherency unit + * + * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC, + * otherwise any straggler data might behave strangely post IOC enabling + * + * 3. All Caches need to be disabled when setting up IOC to elide any in-flight + * Coherency transactions + */ noinline void arc_ioc_setup(void) { + /* Flush + invalidate + disable L1 dcache */ + __dc_disable(); + + /* Flush + invalidate SLC */ + if (read_aux_reg(ARC_REG_SLC_BCR)) + slc_entire_op(OP_FLUSH_N_INV); + + /* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */ write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); + + /* IOC Aperture size: TBD: handle different mem sizes, PAE... */ write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); + write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); + + /* Re-enable L1 dcache */ + __dc_enable(); } void arc_cache_init(void) From e497c8e52a83ebb5309ab41c8851c9cb53f28b73 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 18 Jan 2017 12:59:21 -0800 Subject: [PATCH 581/645] ARCv2: IOC: Use actual memory size to setup aperture size vs. fixed 512M before. But this still assumes that all of memory is under IOC which may not be true for the SoC. Improve that later when this becomes a real issue, by specifying this from DT. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/setup.h | 1 + arch/arc/mm/cache.c | 12 ++++++++++-- arch/arc/mm/init.c | 5 +++++ 3 files changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h index cb954cdab070..c568a9df82b1 100644 --- a/arch/arc/include/asm/setup.h +++ b/arch/arc/include/asm/setup.h @@ -31,6 +31,7 @@ extern int root_mountflags, end_mem; void setup_processor(void); void __init setup_arch_memory(void); +long __init arc_get_mem_sz(void); /* Helpers used in arc_*_mumbojumbo routines */ #define IS_AVAIL1(v, s) ((v) ? s : "") diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 1b4cda10844a..3c275a81528c 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -995,6 +995,8 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) */ noinline void arc_ioc_setup(void) { + unsigned int ap_sz; + /* Flush + invalidate + disable L1 dcache */ __dc_disable(); @@ -1005,8 +1007,14 @@ noinline void arc_ioc_setup(void) /* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */ write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000); - /* IOC Aperture size: TBD: handle different mem sizes, PAE... */ - write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11); + /* + * IOC Aperture size: + * decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies 512M + * TBD: fix for PGU + 1GB of low mem + * TBD: fix for PAE + */ + ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2; + write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz); write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 399e2f223d25..8c9415ed6280 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -40,6 +40,11 @@ struct pglist_data node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); #endif +long __init arc_get_mem_sz(void) +{ + return low_mem_sz; +} + /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ static int __init setup_mem_sz(char *str) { From 76894a72a0d7e0759de272bf3f4d2279ebd86d0b Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 18 Jan 2017 15:10:52 -0800 Subject: [PATCH 582/645] ARC: mm: split arc_cache_init to allow __init reaping of bulk arc_cache_init() is called for each core so can't be tagged __init. However bulk of it is only executed by master core and thus is candidate for __init reaping. So split it up to allow that. Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 3c275a81528c..ee01979e3d01 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -993,7 +993,7 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) * 3. All Caches need to be disabled when setting up IOC to elide any in-flight * Coherency transactions */ -noinline void arc_ioc_setup(void) +noinline void __init arc_ioc_setup(void) { unsigned int ap_sz; @@ -1023,21 +1023,9 @@ noinline void arc_ioc_setup(void) __dc_enable(); } -void arc_cache_init(void) +void __init arc_cache_init_master(void) { unsigned int __maybe_unused cpu = smp_processor_id(); - char str[256]; - - printk(arc_cache_mumbojumbo(0, str, sizeof(str))); - - /* - * Only master CPU needs to execute rest of function: - * - Assume SMP so all cores will have same cache config so - * any geomtry checks will be same for all - * - IOC setup / dma callbacks only need to be setup once - */ - if (cpu) - return; if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) { struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; @@ -1106,3 +1094,20 @@ void arc_cache_init(void) __dma_cache_wback = __dma_cache_wback_l1; } } + +void __ref arc_cache_init(void) +{ + unsigned int __maybe_unused cpu = smp_processor_id(); + char str[256]; + + printk(arc_cache_mumbojumbo(0, str, sizeof(str))); + + /* + * Only master CPU needs to execute rest of function: + * - Assume SMP so all cores will have same cache config so + * any geomtry checks will be same for all + * - IOC setup / dma callbacks only need to be setup once + */ + if (!cpu) + arc_cache_init_master(); +} From d0e73e2ac6a6b157159e1e62f981c06d29f42336 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 17 Jan 2017 11:09:18 -0800 Subject: [PATCH 583/645] ARC: Revert "ARC: mm: IOC: Don't enable IOC by default" The programming model has been fixed with prev patches so re-enable it by default This reverts commit 23cb1f644019bac49d87b4dd7c1eac0569cc4f53. Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index ee01979e3d01..d408fa21a07c 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -23,7 +23,7 @@ static int l2_line_sz; static int ioc_exists; -int slc_enable = 1, ioc_enable = 0; +int slc_enable = 1, ioc_enable = 1; unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */ unsigned long perip_end = 0xFFFFFFFF; /* legacy value */ From 739e6f5945d88dcee01590913f6886132a10c215 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 11 Jan 2017 13:37:07 +0100 Subject: [PATCH 584/645] gpio: provide lockdep keys for nested/unnested irqchips The helper function for adding a GPIO chip compiles in a lockdep key for debugging, the same key is needed for nested chips as well. The macro construction is unreadable, replace this with two static inlines instead. The _gpiochip_irqchip_add prefixed function is not helpful, rename it with gpiochip_irqchip_add_key() that tell us what the function is actually doing. Fixes: d245b3f9bd36 ("gpio: simplify adding threaded interrupts") Cc: Roger Quadros Reported-by: Clemens Gruber Reported-by: Roger Quadros Reported-by: Grygorii Strashko Tested-by: Clemens Gruber Tested-by: Grygorii Strashko Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 18 ++++----- include/linux/gpio/driver.h | 74 ++++++++++++++++++++++++++----------- 2 files changed, 61 insertions(+), 31 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 86bf3b84ada5..a07ae9e37930 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1723,7 +1723,7 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) } /** - * _gpiochip_irqchip_add() - adds an irqchip to a gpiochip + * gpiochip_irqchip_add_key() - adds an irqchip to a gpiochip * @gpiochip: the gpiochip to add the irqchip to * @irqchip: the irqchip to add to the gpiochip * @first_irq: if not dynamically assigned, the base (first) IRQ to @@ -1749,13 +1749,13 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip) * the pins on the gpiochip can generate a unique IRQ. Everything else * need to be open coded. */ -int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, - struct irq_chip *irqchip, - unsigned int first_irq, - irq_flow_handler_t handler, - unsigned int type, - bool nested, - struct lock_class_key *lock_key) +int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int first_irq, + irq_flow_handler_t handler, + unsigned int type, + bool nested, + struct lock_class_key *lock_key) { struct device_node *of_node; bool irq_base_set = false; @@ -1840,7 +1840,7 @@ int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, return 0; } -EXPORT_SYMBOL_GPL(_gpiochip_irqchip_add); +EXPORT_SYMBOL_GPL(gpiochip_irqchip_add_key); #else /* CONFIG_GPIOLIB_IRQCHIP */ diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index c2748accea71..e973faba69dc 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -274,37 +274,67 @@ void gpiochip_set_nested_irqchip(struct gpio_chip *gpiochip, struct irq_chip *irqchip, int parent_irq); -int _gpiochip_irqchip_add(struct gpio_chip *gpiochip, - struct irq_chip *irqchip, - unsigned int first_irq, - irq_flow_handler_t handler, - unsigned int type, - bool nested, - struct lock_class_key *lock_key); +int gpiochip_irqchip_add_key(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int first_irq, + irq_flow_handler_t handler, + unsigned int type, + bool nested, + struct lock_class_key *lock_key); + +#ifdef CONFIG_LOCKDEP + +/* + * Lockdep requires that each irqchip instance be created with a + * unique key so as to avoid unnecessary warnings. This upfront + * boilerplate static inlines provides such a key for each + * unique instance. + */ +static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int first_irq, + irq_flow_handler_t handler, + unsigned int type) +{ + static struct lock_class_key key; + + return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, + handler, type, false, &key); +} -/* FIXME: I assume threaded IRQchips do not have the lockdep problem */ static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, struct irq_chip *irqchip, unsigned int first_irq, irq_flow_handler_t handler, unsigned int type) { - return _gpiochip_irqchip_add(gpiochip, irqchip, first_irq, - handler, type, true, NULL); + + static struct lock_class_key key; + + return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, + handler, type, true, &key); +} +#else +static inline int gpiochip_irqchip_add(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int first_irq, + irq_flow_handler_t handler, + unsigned int type) +{ + return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, + handler, type, false, NULL); } -#ifdef CONFIG_LOCKDEP -#define gpiochip_irqchip_add(...) \ -( \ - ({ \ - static struct lock_class_key _key; \ - _gpiochip_irqchip_add(__VA_ARGS__, false, &_key); \ - }) \ -) -#else -#define gpiochip_irqchip_add(...) \ - _gpiochip_irqchip_add(__VA_ARGS__, false, NULL) -#endif +static inline int gpiochip_irqchip_add_nested(struct gpio_chip *gpiochip, + struct irq_chip *irqchip, + unsigned int first_irq, + irq_flow_handler_t handler, + unsigned int type) +{ + return gpiochip_irqchip_add_key(gpiochip, irqchip, first_irq, + handler, type, true, NULL); +} +#endif /* CONFIG_LOCKDEP */ #endif /* CONFIG_GPIOLIB_IRQCHIP */ From b27e36482c02a94194fec71fb29696f4c8e9241c Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 15 Jan 2017 23:20:28 +0100 Subject: [PATCH 585/645] pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM The GXBB and GXL/GXM pinctrl drivers had a configuration which conflicts with uart_ao_a. According to the GXBB ("S905") datasheet the AO UART functions are: - GPIOAO_0: Func1 = UART_TX_AO_A (bit 12), Func2 = UART_TX_AO_B (bit 26) - GPIOAO_1: Func1 = UART_RX_AO_A (bit 11), Func2 = UART_RX_AO_B (bit 25) - GPIOAO_4: Func2 = UART_TX_AO_B (bit 24) - GPIOAO_5: Func2 = UART_RX_AO_B (bit 25) The existing definition for uart_AO_A already uses GPIOAO_0 and GPIOAO_1. The old definition of uart_AO_B however was broken, as it used GPIOAO_0 for TX (which would be fine) and two pins (GPIOAO_1 and GPIOAO_5) for RX (which does not make any sense). This fixes the uart_AO_B configuration by moving it to GPIOAO_4 and GPIOAO_5 (it would be possible to use GPIOAO_0 and GPIOAO_1 in theory, but all existing hardware uses uart_AO_A there). The fix for GXBB and GXL/GXM is identical since it seems that these specific pins are identical on both SoC variants. Signed-off-by: Martin Blumenstingl Reviewed-by: Kevin Hilman Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 7 +++---- drivers/pinctrl/meson/pinctrl-meson-gxl.c | 7 +++---- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c index c3928aa3fefa..e0bca4df2a2f 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c @@ -253,9 +253,8 @@ static const unsigned int uart_tx_ao_a_pins[] = { PIN(GPIOAO_0, 0) }; static const unsigned int uart_rx_ao_a_pins[] = { PIN(GPIOAO_1, 0) }; static const unsigned int uart_cts_ao_a_pins[] = { PIN(GPIOAO_2, 0) }; static const unsigned int uart_rts_ao_a_pins[] = { PIN(GPIOAO_3, 0) }; -static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_0, 0) }; -static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_1, 0), - PIN(GPIOAO_5, 0) }; +static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_4, 0) }; +static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_5, 0) }; static const unsigned int uart_cts_ao_b_pins[] = { PIN(GPIOAO_2, 0) }; static const unsigned int uart_rts_ao_b_pins[] = { PIN(GPIOAO_3, 0) }; @@ -498,7 +497,7 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = { GPIO_GROUP(GPIOAO_13, 0), /* bank AO */ - GROUP(uart_tx_ao_b, 0, 26), + GROUP(uart_tx_ao_b, 0, 24), GROUP(uart_rx_ao_b, 0, 25), GROUP(uart_tx_ao_a, 0, 12), GROUP(uart_rx_ao_a, 0, 11), diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c index 25694f7094c7..b69743b07a1d 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c +++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c @@ -214,9 +214,8 @@ static const unsigned int uart_tx_ao_a_pins[] = { PIN(GPIOAO_0, 0) }; static const unsigned int uart_rx_ao_a_pins[] = { PIN(GPIOAO_1, 0) }; static const unsigned int uart_cts_ao_a_pins[] = { PIN(GPIOAO_2, 0) }; static const unsigned int uart_rts_ao_a_pins[] = { PIN(GPIOAO_3, 0) }; -static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_0, 0) }; -static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_1, 0), - PIN(GPIOAO_5, 0) }; +static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_4, 0) }; +static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_5, 0) }; static const unsigned int uart_cts_ao_b_pins[] = { PIN(GPIOAO_2, 0) }; static const unsigned int uart_rts_ao_b_pins[] = { PIN(GPIOAO_3, 0) }; @@ -409,7 +408,7 @@ static struct meson_pmx_group meson_gxl_aobus_groups[] = { GPIO_GROUP(GPIOAO_9, 0), /* bank AO */ - GROUP(uart_tx_ao_b, 0, 26), + GROUP(uart_tx_ao_b, 0, 24), GROUP(uart_rx_ao_b, 0, 25), GROUP(uart_tx_ao_a, 0, 12), GROUP(uart_rx_ao_a, 0, 11), From df1539c25cce98e2ac69881958850c6535240707 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 17 Jan 2017 19:52:54 +0900 Subject: [PATCH 586/645] pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20 Fix the pin-mux values for the MDC, MDIO, MDIO_INTL, PHYRSTL pins. Fixes: 1e359ab1285e ("pinctrl: uniphier: add Ethernet pin-mux settings") Signed-off-by: Masahiro Yamada Signed-off-by: Linus Walleij --- drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c index aa8bd9794683..96686336e3a3 100644 --- a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c @@ -561,7 +561,7 @@ static const int ether_rgmii_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; static const unsigned ether_rmii_pins[] = {30, 31, 32, 33, 34, 35, 36, 37, 39, 41, 42, 45}; -static const int ether_rmii_muxvals[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}; +static const int ether_rmii_muxvals[] = {0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1}; static const unsigned i2c0_pins[] = {63, 64}; static const int i2c0_muxvals[] = {0, 0}; static const unsigned i2c1_pins[] = {65, 66}; From a9ce7856cad1bf43de5c43888e4076e77371d51b Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Tue, 17 Jan 2017 15:38:58 -0800 Subject: [PATCH 587/645] HID: wacom: Fix sibling detection regression Commit 345857b ("HID: wacom: generic: Add support for sensor offsets") included a change to the operation and location of the call to 'wacom_add_shared_data' in 'wacom_parse_and_register'. The modifications included moving it higher up so that it would occur before the call to 'wacom_retrieve_hid_descriptor'. This was done to prevent a crash that would have occured when the report containing tablet offsets was fed into the driver with 'wacom_hid_report_raw_event' (specifically: the various 'wacom_wac_*_report' functions were written with the assumption that they would only be called once tablet setup had completed; 'wacom_wac_pen_report' in particular dereferences 'shared' which wasn't yet allocated). Moving the call to 'wacom_add_shared_data' effectively prevented the crash but also broke the sibiling detection code which assumes that the HID descriptor has been read and the various device_type flags set. To fix this situation, we restore the original 'wacom_add_shared_data' operation and location and instead implement an alternative change that can also prevent the crash. Specifically, we notice that the report functions mentioned above expect to be called only for input reports. By adding a check, we can prevent feature reports (such as the offset report) from causing trouble. Fixes: 345857bb49 ("HID: wacom: generic: Add support for sensor offsets") Signed-off-by: Jason Gerecke Tested-by: Ping Cheng Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- drivers/hid/wacom_sys.c | 16 ++++++++-------- drivers/hid/wacom_wac.c | 10 ++++++++++ 2 files changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index b9779bcbd140..8aeca038cc73 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -740,6 +740,11 @@ static int wacom_add_shared_data(struct hid_device *hdev) return retval; } + if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) + wacom_wac->shared->touch = hdev; + else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN) + wacom_wac->shared->pen = hdev; + out: mutex_unlock(&wacom_udev_list_lock); return retval; @@ -2036,10 +2041,6 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless) if (error) goto fail; - error = wacom_add_shared_data(hdev); - if (error) - goto fail; - /* * Bamboo Pad has a generic hid handling for the Pen, and we switch it * into debug mode for the touch part. @@ -2080,10 +2081,9 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless) wacom_update_name(wacom, wireless ? " (WL)" : ""); - if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) - wacom_wac->shared->touch = hdev; - else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN) - wacom_wac->shared->pen = hdev; + error = wacom_add_shared_data(hdev); + if (error) + goto fail; if (!(features->device_type & WACOM_DEVICETYPE_WL_MONITOR) && (features->quirks & WACOM_QUIRK_BATTERY)) { diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index b1a9a3ca6d56..0884dc9554fd 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -2187,6 +2187,16 @@ void wacom_wac_report(struct hid_device *hdev, struct hid_report *report) wacom_report_events(hdev, report); + /* + * Non-input reports may be sent prior to the device being + * completely initialized. Since only their events need + * to be processed, exit after 'wacom_report_events' has + * been called to prevent potential crashes in the report- + * processing functions. + */ + if (report->type != HID_INPUT_REPORT) + return; + if (WACOM_PAD_FIELD(field)) { wacom_wac_pad_battery_report(hdev, report); if (wacom->wacom_wac.pad_input) From 7d9e8f71b989230bc613d121ca38507d34ada849 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 18 Jan 2017 17:23:41 +0000 Subject: [PATCH 588/645] arm64: avoid returning from bad_mode Generally, taking an unexpected exception should be a fatal event, and bad_mode is intended to cater for this. However, it should be possible to contain unexpected synchronous exceptions from EL0 without bringing the kernel down, by sending a SIGILL to the task. We tried to apply this approach in commit 9955ac47f4ba1c95 ("arm64: don't kill the kernel on a bad esr from el0"), by sending a signal for any bad_mode call resulting from an EL0 exception. However, this also applies to other unexpected exceptions, such as SError and FIQ. The entry paths for these exceptions branch to bad_mode without configuring the link register, and have no kernel_exit. Thus, if we take one of these exceptions from EL0, bad_mode will eventually return to the original user link register value. This patch fixes this by introducing a new bad_el0_sync handler to cater for the recoverable case, and restoring bad_mode to its original state, whereby it calls panic() and never returns. The recoverable case branches to bad_el0_sync with a bl, and returns to userspace via the usual ret_to_user mechanism. Signed-off-by: Mark Rutland Fixes: 9955ac47f4ba1c95 ("arm64: don't kill the kernel on a bad esr from el0") Reported-by: Mark Salter Cc: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas --- arch/arm64/kernel/entry.S | 2 +- arch/arm64/kernel/traps.c | 28 ++++++++++++++++++++++++---- 2 files changed, 25 insertions(+), 5 deletions(-) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 923841ffe4a9..43512d4d7df2 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -683,7 +683,7 @@ el0_inv: mov x0, sp mov x1, #BAD_SYNC mov x2, x25 - bl bad_mode + bl bad_el0_sync b ret_to_user ENDPROC(el0_sync) diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 5b830be79c01..659b2e6b6cf7 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -604,17 +604,34 @@ const char *esr_get_class_string(u32 esr) } /* - * bad_mode handles the impossible case in the exception vector. + * bad_mode handles the impossible case in the exception vector. This is always + * fatal. */ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) { - siginfo_t info; - void __user *pc = (void __user *)instruction_pointer(regs); console_verbose(); pr_crit("Bad mode in %s handler detected on CPU%d, code 0x%08x -- %s\n", handler[reason], smp_processor_id(), esr, esr_get_class_string(esr)); + + die("Oops - bad mode", regs, 0); + local_irq_disable(); + panic("bad mode"); +} + +/* + * bad_el0_sync handles unexpected, but potentially recoverable synchronous + * exceptions taken from EL0. Unlike bad_mode, this returns. + */ +asmlinkage void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr) +{ + siginfo_t info; + void __user *pc = (void __user *)instruction_pointer(regs); + console_verbose(); + + pr_crit("Bad EL0 synchronous exception detected on CPU%d, code 0x%08x -- %s\n", + smp_processor_id(), esr, esr_get_class_string(esr)); __show_regs(regs); info.si_signo = SIGILL; @@ -622,7 +639,10 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) info.si_code = ILL_ILLOPC; info.si_addr = pc; - arm64_notify_die("Oops - bad mode", regs, &info, 0); + current->thread.fault_address = 0; + current->thread.fault_code = 0; + + force_sig_info(info.si_signo, &info, current); } void __pte_error(const char *file, int line, unsigned long val) From d61b7f972dab2a7d187c38254845546dfc8eed85 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 19 Jan 2017 16:08:49 -0500 Subject: [PATCH 589/645] nbd: only set MSG_MORE when we have more to send A user noticed that write performance was horrible over loopback and we traced it to an inversion of when we need to set MSG_MORE. It should be set when we have more bvec's to send, not when we are on the last bvec. This patch made the test go from 20 iops to 78k iops. Signed-off-by: Josef Bacik Fixes: 429a787be679 ("nbd: fix use-after-free of rq/bio in the xmit path") Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 50a2020b5b72..9fd06eeb1a17 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -271,7 +271,7 @@ static inline int sock_send_bvec(struct nbd_device *nbd, int index, static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) { struct request *req = blk_mq_rq_from_pdu(cmd); - int result, flags; + int result; struct nbd_request request; unsigned long size = blk_rq_bytes(req); struct bio *bio; @@ -310,7 +310,6 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) if (type != NBD_CMD_WRITE) return 0; - flags = 0; bio = req->bio; while (bio) { struct bio *next = bio->bi_next; @@ -319,9 +318,8 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) bio_for_each_segment(bvec, bio, iter) { bool is_last = !next && bio_iter_last(bvec, iter); + int flags = is_last ? 0 : MSG_MORE; - if (is_last) - flags = MSG_MORE; dev_dbg(nbd_to_dev(nbd), "request %p: sending %d bytes data\n", cmd, bvec.bv_len); result = sock_send_bvec(nbd, index, &bvec, flags); From 1d822a40b81568becba8777b525a1ed255a8078c Mon Sep 17 00:00:00 2001 From: Bhumika Goyal Date: Mon, 9 Jan 2017 20:51:02 +0530 Subject: [PATCH 590/645] vhost: scsi: constify target_core_fabric_ops structures Declare target_core_fabric_ops strucrues as const as they are only passed as an argument to the functions target_register_template and target_unregister_template. The arguments are of type const struct target_core_fabric_ops *, so target_core_fabric_ops structures having this property can be declared const. Done using Coccinelle: @r disable optional_qualifier@ identifier i; position p; @@ static struct target_core_fabric_ops i@p={...}; @ok@ position p; identifier r.i; @@ ( target_register_template(&i@p) | target_unregister_template(&i@p) ) @bad@ position p!={r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ +const struct target_core_fabric_ops i; File size before: drivers/vhost/scsi.o text data bss dec hex filename 18063 2985 40 21088 5260 drivers/vhost/scsi.o File size after: drivers/vhost/scsi.o text data bss dec hex filename 18479 2601 40 21120 5280 drivers/vhost/scsi.o Signed-off-by: Bhumika Goyal Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang --- drivers/vhost/scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index 253310cdaaca..620366dff754 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -2087,7 +2087,7 @@ static struct configfs_attribute *vhost_scsi_wwn_attrs[] = { NULL, }; -static struct target_core_fabric_ops vhost_scsi_ops = { +static const struct target_core_fabric_ops vhost_scsi_ops = { .module = THIS_MODULE, .name = "vhost", .get_fabric_name = vhost_scsi_get_fabric_name, From 532e15af105a0b86211f515bd5fec1f4cdd9f27b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 12 Jan 2017 21:45:04 +0300 Subject: [PATCH 591/645] vhost/scsi: silence uninitialized variable warning This is to silence an uninitialized variable warning in debug output. The problem is this line: pr_debug("vhost_get_vq_desc: head: %d, out: %u in: %u\n", head, out, in); If "head == vq->num" is true on the first iteration then "out" and "in" aren't initialized. We handle that a few lines after the printk. I was tempted to just delete the pr_debug() but I decided to just initialize them to zero instead. Also checkpatch.pl complains if variables are declared as just "unsigned" without the "int". Signed-off-by: Dan Carpenter Signed-off-by: Michael S. Tsirkin --- drivers/vhost/scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index 620366dff754..fd6c8b66f06f 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -843,7 +843,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq) struct iov_iter out_iter, in_iter, prot_iter, data_iter; u64 tag; u32 exp_data_len, data_direction; - unsigned out, in; + unsigned int out = 0, in = 0; int head, ret, prot_bytes; size_t req_size, rsp_size = sizeof(struct virtio_scsi_cmd_resp); size_t out_size, in_size; From 8379cadf71c3ee8173a1c6fc1ea7762a9638c047 Mon Sep 17 00:00:00 2001 From: "G. Campana" Date: Thu, 19 Jan 2017 23:37:46 +0200 Subject: [PATCH 592/645] virtio_console: fix a crash in config_work_handler Using control_work instead of config_work as the 3rd argument to container_of results in an invalid portdev pointer. Indeed, the work structure is initialized as below: INIT_WORK(&portdev->config_work, &config_work_handler); It leads to a crash when portdev->vdev is dereferenced later. This bug is triggered when the guest uses a virtio-console without multiport feature and receives a config_changed virtio interrupt. Signed-off-by: G. Campana Reviewed-by: Amit Shah Signed-off-by: Michael S. Tsirkin --- drivers/char/virtio_console.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 8b00e79c2683..17857beb4892 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1862,7 +1862,7 @@ static void config_work_handler(struct work_struct *work) { struct ports_device *portdev; - portdev = container_of(work, struct ports_device, control_work); + portdev = container_of(work, struct ports_device, config_work); if (!use_multiport(portdev)) { struct virtio_device *vdev; struct port *port; From 21f5eda9b8671744539c8295b9df62991fffb2ce Mon Sep 17 00:00:00 2001 From: Halil Pasic Date: Mon, 29 Aug 2016 18:25:22 +0200 Subject: [PATCH 593/645] tools/virtio/ringtest: fix run-on-all.sh for offline cpus Since ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu") run-on-all.sh uses seq 0 $HOST_AFFINITY as the list of ids of the CPUs to run the command on (assuming ids of online CPUs are consecutive and start from 0), where $HOST_AFFINITY is the highest CPU id in the system previously determined using lscpu. This can fail on systems with offline CPUs. Instead let's use lscpu to determine the list of online CPUs. Signed-off-by: Halil Pasic Fixes: ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu") Reviewed-by: Sascha Silbe Signed-off-by: Cornelia Huck --- tools/virtio/ringtest/run-on-all.sh | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/virtio/ringtest/run-on-all.sh b/tools/virtio/ringtest/run-on-all.sh index 2e69ca812b4c..29b0d3920bfc 100755 --- a/tools/virtio/ringtest/run-on-all.sh +++ b/tools/virtio/ringtest/run-on-all.sh @@ -1,12 +1,13 @@ #!/bin/sh +CPUS_ONLINE=$(lscpu --online -p=cpu|grep -v -e '#') #use last CPU for host. Why not the first? #many devices tend to use cpu0 by default so #it tends to be busier -HOST_AFFINITY=$(lscpu -p=cpu | tail -1) +HOST_AFFINITY=$(echo "${CPUS_ONLINE}"|tail -n 1) #run command on all cpus -for cpu in $(seq 0 $HOST_AFFINITY) +for cpu in $CPUS_ONLINE do #Don't run guest and host on same CPU #It actually works ok if using signalling From 47a4c49af6cc1982ce613c8ee79aab459d04c44c Mon Sep 17 00:00:00 2001 From: Halil Pasic Date: Fri, 2 Sep 2016 17:59:36 +0200 Subject: [PATCH 594/645] tools/virtio/ringtest: tweaks for s390 Make ringtest work on s390 too. Signed-off-by: Halil Pasic Acked-by: Sascha Silbe Signed-off-by: Cornelia Huck --- tools/virtio/ringtest/main.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/tools/virtio/ringtest/main.h b/tools/virtio/ringtest/main.h index 34e63cc4c572..14142faf040b 100644 --- a/tools/virtio/ringtest/main.h +++ b/tools/virtio/ringtest/main.h @@ -26,6 +26,16 @@ static inline void wait_cycles(unsigned long long cycles) #define VMEXIT_CYCLES 500 #define VMENTRY_CYCLES 500 +#elif defined(__s390x__) +static inline void wait_cycles(unsigned long long cycles) +{ + asm volatile("0: brctg %0,0b" : : "d" (cycles)); +} + +/* tweak me */ +#define VMEXIT_CYCLES 200 +#define VMENTRY_CYCLES 200 + #else static inline void wait_cycles(unsigned long long cycles) { @@ -81,6 +91,8 @@ extern unsigned ring_size; /* Is there a portable way to do this? */ #if defined(__x86_64__) || defined(__i386__) #define cpu_relax() asm ("rep; nop" ::: "memory") +#elif defined(__s390x__) +#define cpu_relax() barrier() #else #define cpu_relax() assert(0) #endif From 7d3ce5ab9430504b6d91027919529f68fd14af9b Mon Sep 17 00:00:00 2001 From: Pierre Morel Date: Fri, 28 Aug 2015 11:09:32 +0200 Subject: [PATCH 595/645] virtio/s390: support READ_STATUS command for virtio-ccw As virtio-1 introduced the possibility of the device manipulating the status byte, revision 2 of the virtio-ccw transport introduced a means of getting the status byte from the device via READ_STATUS. Let's wire it up for revisions >= 2 and fall back to returning the stored status byte if not supported. Signed-off-by: Pierre Morel Signed-off-by: Cornelia Huck --- drivers/s390/virtio/virtio_ccw.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c index 639ed4e6afd1..01e3dcfd7c64 100644 --- a/drivers/s390/virtio/virtio_ccw.c +++ b/drivers/s390/virtio/virtio_ccw.c @@ -145,6 +145,7 @@ static struct airq_info *airq_areas[MAX_AIRQ_AREAS]; #define CCW_CMD_WRITE_CONF 0x21 #define CCW_CMD_WRITE_STATUS 0x31 #define CCW_CMD_READ_VQ_CONF 0x32 +#define CCW_CMD_READ_STATUS 0x72 #define CCW_CMD_SET_IND_ADAPTER 0x73 #define CCW_CMD_SET_VIRTIO_REV 0x83 @@ -160,6 +161,7 @@ static struct airq_info *airq_areas[MAX_AIRQ_AREAS]; #define VIRTIO_CCW_DOING_SET_CONF_IND 0x04000000 #define VIRTIO_CCW_DOING_SET_IND_ADAPTER 0x08000000 #define VIRTIO_CCW_DOING_SET_VIRTIO_REV 0x10000000 +#define VIRTIO_CCW_DOING_READ_STATUS 0x20000000 #define VIRTIO_CCW_INTPARM_MASK 0xffff0000 static struct virtio_ccw_device *to_vc_device(struct virtio_device *vdev) @@ -892,6 +894,28 @@ out_free: static u8 virtio_ccw_get_status(struct virtio_device *vdev) { struct virtio_ccw_device *vcdev = to_vc_device(vdev); + u8 old_status = *vcdev->status; + struct ccw1 *ccw; + + if (vcdev->revision < 1) + return *vcdev->status; + + ccw = kzalloc(sizeof(*ccw), GFP_DMA | GFP_KERNEL); + if (!ccw) + return old_status; + + ccw->cmd_code = CCW_CMD_READ_STATUS; + ccw->flags = 0; + ccw->count = sizeof(*vcdev->status); + ccw->cda = (__u32)(unsigned long)vcdev->status; + ccw_io_helper(vcdev, ccw, VIRTIO_CCW_DOING_READ_STATUS); +/* + * If the channel program failed (should only happen if the device + * was hotunplugged, and then we clean up via the machine check + * handler anyway), vcdev->status was not overwritten and we just + * return the old status, which is fine. +*/ + kfree(ccw); return *vcdev->status; } @@ -987,6 +1011,7 @@ static void virtio_ccw_check_activity(struct virtio_ccw_device *vcdev, case VIRTIO_CCW_DOING_READ_CONFIG: case VIRTIO_CCW_DOING_WRITE_CONFIG: case VIRTIO_CCW_DOING_WRITE_STATUS: + case VIRTIO_CCW_DOING_READ_STATUS: case VIRTIO_CCW_DOING_SET_VQ: case VIRTIO_CCW_DOING_SET_IND: case VIRTIO_CCW_DOING_SET_CONF_IND: From 99240622bdde46f159a89e72199779d3c5a08b98 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 27 Sep 2016 13:08:44 -0700 Subject: [PATCH 596/645] virtio/s390: add missing \n to end of dev_err message Trival fix, dev_err message is missing a \n, so add it. Signed-off-by: Colin Ian King Message-Id: <20160927200844.16008-1-colin.king@canonical.com> Signed-off-by: Christian Borntraeger Signed-off-by: Cornelia Huck --- drivers/s390/virtio/virtio_ccw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c index 01e3dcfd7c64..0672c6234ae8 100644 --- a/drivers/s390/virtio/virtio_ccw.c +++ b/drivers/s390/virtio/virtio_ccw.c @@ -454,7 +454,7 @@ static void virtio_ccw_del_vq(struct virtqueue *vq, struct ccw1 *ccw) * This may happen on device detach. */ if (ret && (ret != -ENODEV)) - dev_warn(&vq->vdev->dev, "Error %d while deleting queue %d", + dev_warn(&vq->vdev->dev, "Error %d while deleting queue %d\n", ret, index); vring_del_virtqueue(vq); From 0db1dba5dfaf70fb3baf07973996db2078528cde Mon Sep 17 00:00:00 2001 From: Bhumika Goyal Date: Sat, 14 Jan 2017 00:18:56 +0530 Subject: [PATCH 597/645] virtio/s390: virtio: constify virtio_config_ops structures Declare virtio_config_ops structure as const as it is only stored in the config field of a virtio_device structure. This field is of type const, so virtio_config_ops structures having this property can be declared const. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct virtio_config_ops i@p={...}; @ok1@ identifier r1.i; position p; struct virtio_ccw_device x; @@ x.vdev.config=&i@p @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct virtio_config_ops i; File size before and after applying the patch remains the same. text data bss dec hex filename 9235 296 32928 42459 a5db drivers/s390/virtio/virtio_ccw.o Signed-off-by: Bhumika Goyal Message-Id: <1484333336-13443-1-git-send-email-bhumirks@gmail.com> Signed-off-by: Christian Borntraeger Signed-off-by: Cornelia Huck --- drivers/s390/virtio/virtio_ccw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c index 0672c6234ae8..070c4da95f48 100644 --- a/drivers/s390/virtio/virtio_ccw.c +++ b/drivers/s390/virtio/virtio_ccw.c @@ -944,7 +944,7 @@ static void virtio_ccw_set_status(struct virtio_device *vdev, u8 status) kfree(ccw); } -static struct virtio_config_ops virtio_ccw_config_ops = { +static const struct virtio_config_ops virtio_ccw_config_ops = { .get_features = virtio_ccw_get_features, .finalize_features = virtio_ccw_finalize_features, .get = virtio_ccw_get_config, From 43849785e1079f6606a31cb7fda92d1200849728 Mon Sep 17 00:00:00 2001 From: Fabien Parent Date: Tue, 17 Jan 2017 13:57:42 +0100 Subject: [PATCH 598/645] ARM: dts: da850-evm: fix read access to SPI flash Read access to the SPI flash are broken on da850-evm, i.e. the data read is not what is actually programmed on the flash. According to the datasheet for the M25P64 part present on the da850-evm, if the SPI frequency is higher than 20MHz then the READ command is not usable anymore and only the FAST_READ command can be used to read data. This commit specifies in the DTS that we should use FAST_READ command instead of the READ command. Cc: stable@vger.kernel.org Tested-by: Kevin Hilman Signed-off-by: Fabien Parent [nsekhar@ti.com: subject line adjustment] Signed-off-by: Sekhar Nori Signed-off-by: Olof Johansson --- arch/arm/boot/dts/da850-evm.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 41de15fe15a2..78492a0bbbab 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -99,6 +99,7 @@ #size-cells = <1>; compatible = "m25p64"; spi-max-frequency = <30000000>; + m25p,fast-read; reg = <0>; partition@0 { label = "U-Boot-SPL"; From 99dfe80a2a246c600440a815741fd2e74a8b4977 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Thu, 5 Jan 2017 16:50:57 +0000 Subject: [PATCH 599/645] powerpc/ptrace: Preserve previous fprs/vsrs on short regset write Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: c6e6771b87d4 ("powerpc: Introduce VSX thread_struct and CONFIG_VSX") Cc: stable@vger.kernel.org # v2.6.27+ Signed-off-by: Dave Martin Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/ptrace.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index e4744ff38a17..10543eb1f8f3 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -463,6 +463,10 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset, flush_fp_to_thread(target); + for (i = 0; i < 32 ; i++) + buf[i] = target->thread.TS_FPR(i); + buf[32] = target->thread.fp_state.fpscr; + /* copy to local buffer then write that out */ i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1); if (i) @@ -672,6 +676,9 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset, flush_altivec_to_thread(target); flush_vsx_to_thread(target); + for (i = 0; i < 32 ; i++) + buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET]; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); if (!ret) From b34ca60148c53971d373643195cc5c4d5d20be78 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Thu, 5 Jan 2017 16:50:57 +0000 Subject: [PATCH 600/645] powerpc/ptrace: Preserve previous TM fprs/vsrs on short regset write Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the check pointed registers, the thread's old check pointed registers are preserved. Fixes: 9d3918f7c0e5 ("powerpc/ptrace: Enable support for NT_PPC_CVSX") Fixes: 19cbcbf75a0c ("powerpc/ptrace: Enable support for NT_PPC_CFPR") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Dave Martin Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/ptrace.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 10543eb1f8f3..925a4ef90559 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -1026,6 +1026,10 @@ static int tm_cfpr_set(struct task_struct *target, flush_fp_to_thread(target); flush_altivec_to_thread(target); + for (i = 0; i < 32; i++) + buf[i] = target->thread.TS_CKFPR(i); + buf[32] = target->thread.ckfp_state.fpscr; + /* copy to local buffer then write that out */ i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1); if (i) @@ -1290,6 +1294,9 @@ static int tm_cvsx_set(struct task_struct *target, flush_altivec_to_thread(target); flush_vsx_to_thread(target); + for (i = 0; i < 32 ; i++) + buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET]; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); if (!ret) From 178f358208ceb8b38e5cff3f815e0db4a6a70a07 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 19 Jan 2017 14:19:10 +1100 Subject: [PATCH 601/645] powerpc: Ignore reserved field in DCSR and PVR reads and writes IBM bit 31 (for the rest of us - bit 0) is a reserved field in the instruction definition of mtspr and mfspr. Hardware is encouraged to (and does) ignore it. As a result, if userspace executes an mtspr DSCR with the reserved bit set, we get a DSCR facility unavailable exception. The kernel fails to match against the expected value/mask, and we silently return to userspace to try and re-execute the same mtspr DSCR instruction. We loop forever until the process is killed. We should do something here, and it seems mirroring what hardware does is the better option vs killing the process. While here, relax the matching of mfspr PVR too. Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/ppc-opcode.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index c56ea8c84abb..c4ced1d01d57 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -157,7 +157,7 @@ #define PPC_INST_MCRXR 0x7c000400 #define PPC_INST_MCRXR_MASK 0xfc0007fe #define PPC_INST_MFSPR_PVR 0x7c1f42a6 -#define PPC_INST_MFSPR_PVR_MASK 0xfc1fffff +#define PPC_INST_MFSPR_PVR_MASK 0xfc1ffffe #define PPC_INST_MFTMR 0x7c0002dc #define PPC_INST_MSGSND 0x7c00019c #define PPC_INST_MSGCLR 0x7c0001dc @@ -174,13 +174,13 @@ #define PPC_INST_RFDI 0x4c00004e #define PPC_INST_RFMCI 0x4c00004c #define PPC_INST_MFSPR_DSCR 0x7c1102a6 -#define PPC_INST_MFSPR_DSCR_MASK 0xfc1fffff +#define PPC_INST_MFSPR_DSCR_MASK 0xfc1ffffe #define PPC_INST_MTSPR_DSCR 0x7c1103a6 -#define PPC_INST_MTSPR_DSCR_MASK 0xfc1fffff +#define PPC_INST_MTSPR_DSCR_MASK 0xfc1ffffe #define PPC_INST_MFSPR_DSCR_USER 0x7c0302a6 -#define PPC_INST_MFSPR_DSCR_USER_MASK 0xfc1fffff +#define PPC_INST_MFSPR_DSCR_USER_MASK 0xfc1ffffe #define PPC_INST_MTSPR_DSCR_USER 0x7c0303a6 -#define PPC_INST_MTSPR_DSCR_USER_MASK 0xfc1fffff +#define PPC_INST_MTSPR_DSCR_USER_MASK 0xfc1ffffe #define PPC_INST_MFVSRD 0x7c000066 #define PPC_INST_MTVSRD 0x7c000166 #define PPC_INST_SLBFEE 0x7c0007a7 From 4151e9a61c26bc86a356edfea713c0f913582760 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 17 Jan 2017 15:15:18 +0100 Subject: [PATCH 602/645] drm/exynos/decon5433: do not disable video after reset decon_commit is called just after reset so video is disabled anyway. Signed-off-by: Andrzej Hajda Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 09e8cc36948e..d4920091e35c 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -142,8 +142,6 @@ static void decon_commit(struct exynos_drm_crtc *crtc) m->crtc_vsync_end = m->crtc_vsync_start + 1; } - decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID, 0); - /* enable clock gate */ val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; writel(val, ctx->addr + DECON_CMU); From 1202a096328ed3de59e2a722038c4d80ec59a958 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 17 Jan 2017 15:15:19 +0100 Subject: [PATCH 603/645] drm/exynos/decon5433: fix CMU programming DECON_CMU register has reserved bits which should not be zeroed, otherwise IP can behave strangely and cause IOMMU faults. Signed-off-by: Andrzej Hajda Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index d4920091e35c..3a9aca1c62f9 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -142,10 +142,6 @@ static void decon_commit(struct exynos_drm_crtc *crtc) m->crtc_vsync_end = m->crtc_vsync_start + 1; } - /* enable clock gate */ - val = CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F; - writel(val, ctx->addr + DECON_CMU); - if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)) decon_setup_trigger(ctx); From 11d8bcef7a0399e1d2519f207fd575fc404306b4 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 17 Jan 2017 15:15:20 +0100 Subject: [PATCH 604/645] drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement DECON_TV requires STANDALONE_UPDATE after output enabling, otherwise it does not start. This change is neutral for DECON. Signed-off-by: Andrzej Hajda Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 3a9aca1c62f9..75eeb831ed6a 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -183,6 +183,8 @@ static void decon_commit(struct exynos_drm_crtc *crtc) /* enable output and display signal */ decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0); + + decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); } static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win, From 488dc164914ff5ce5e913abd32048d28fc0d06b8 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 20 Jan 2017 15:38:24 +0200 Subject: [PATCH 605/645] xhci: remove WARN_ON if dma mask is not set for platform devices The warn on is a bit too much, we will anyway set the dma mask if not set previously. The main reason for this fix is that 4.10-rc1 has a dwc3 change that pass a parent sysdev dev pointer instead of setting the dma mask of its xhci platform device. xhci platform driver can then get more attributes from the sysdev than just the dma mask. The usb core and xhci changes are not yet in 4.10, and a fix like this was preferred instead of taking those big changes this late in the rc-cycle. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index ddfab301e366..e5834dd9bcde 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -165,7 +165,7 @@ static int xhci_plat_probe(struct platform_device *pdev) return -ENODEV; /* Try to set 64-bit DMA first */ - if (WARN_ON(!pdev->dev.dma_mask)) + if (!pdev->dev.dma_mask) /* Platform did not initialize dma_mask */ ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); From 04478197416e3a302e9ebc917ba1aa884ef9bfab Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 12 Jan 2017 16:25:15 +0100 Subject: [PATCH 606/645] KVM: s390: do not expose random data via facility bitmap kvm_s390_get_machine() populates the facility bitmap by copying bytes from the host results that are stored in a 256 byte array in the prefix page. The KVM code does use the size of the target buffer (2k), thus copying and exposing unrelated kernel memory (mostly machine check related logout data). Let's use the size of the source buffer instead. This is ok, as the target buffer will always be greater or equal than the source buffer as the KVM internal buffers (and thus S390_ARCH_FAC_LIST_SIZE_BYTE) cover the maximum possible size that is allowed by STFLE, which is 256 doublewords. All structures are zero allocated so we can leave bytes 256-2047 unchanged. Add a similar fix for kvm_arch_init_vm(). Reported-by: Heiko Carstens [found with smatch] Signed-off-by: Christian Borntraeger CC: stable@vger.kernel.org Acked-by: Cornelia Huck --- arch/s390/kvm/kvm-s390.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index bec71e902be3..6484a250021e 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -916,7 +916,7 @@ static int kvm_s390_get_machine(struct kvm *kvm, struct kvm_device_attr *attr) memcpy(&mach->fac_mask, kvm->arch.model.fac_mask, S390_ARCH_FAC_LIST_SIZE_BYTE); memcpy((unsigned long *)&mach->fac_list, S390_lowcore.stfle_fac_list, - S390_ARCH_FAC_LIST_SIZE_BYTE); + sizeof(S390_lowcore.stfle_fac_list)); if (copy_to_user((void __user *)attr->addr, mach, sizeof(*mach))) ret = -EFAULT; kfree(mach); @@ -1437,7 +1437,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) /* Populate the facility mask initially. */ memcpy(kvm->arch.model.fac_mask, S390_lowcore.stfle_fac_list, - S390_ARCH_FAC_LIST_SIZE_BYTE); + sizeof(S390_lowcore.stfle_fac_list)); for (i = 0; i < S390_ARCH_FAC_LIST_SIZE_U64; i++) { if (i < kvm_s390_fac_list_mask_size()) kvm->arch.model.fac_mask[i] &= kvm_s390_fac_list_mask[i]; From 63d762b88cb5510f2bfdb5112ced18cde867ae61 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 7 Jan 2017 09:33:34 +0300 Subject: [PATCH 607/645] platform/x86: mlx-platform: free first dev on error There is an off-by-one error so we don't unregister priv->pdev_mux[0]. Also it's slightly simpler as a while loop instead of a for loop. Fixes: 58cbbee2391c ("x86/platform/mellanox: Introduce support for Mellanox systems platform") Signed-off-by: Dan Carpenter Acked-by: Vadim Pasternak Signed-off-by: Andy Shevchenko --- drivers/platform/x86/mlx-platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c index 97b4c3a219c0..25f15df5c2d7 100644 --- a/drivers/platform/x86/mlx-platform.c +++ b/drivers/platform/x86/mlx-platform.c @@ -326,7 +326,7 @@ static int __init mlxplat_init(void) return 0; fail_platform_mux_register: - for (i--; i > 0 ; i--) + while (--i >= 0) platform_device_unregister(priv->pdev_mux[i]); platform_device_unregister(priv->pdev_i2c); fail_alloc: From 44e6861646748a21b55725adc0780342f4440066 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 10 Jan 2017 16:28:47 +0100 Subject: [PATCH 608/645] platform/x86: surface3-wmi: Shut up unused-function warning The newly added driver guards its "resume" callback with an warning in some configurations: drivers/platform/x86/surface3-wmi.c:248:12: error: 's3_wmi_resume' defined but not used [-Werror=unused-function] Using a __maybe_unused annotation without an #ifdef avoids the mistake more reliably. Fixes: 3dda3b3798f9 ("platform/x86: Add custom surface3 platform device for controlling LID") Signed-off-by: Arnd Bergmann Reviewed-by: Benjamin Tissoires Signed-off-by: Darren Hart --- drivers/platform/x86/surface3-wmi.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/platform/x86/surface3-wmi.c b/drivers/platform/x86/surface3-wmi.c index cbf4d83a7271..6ac1d1349d7e 100644 --- a/drivers/platform/x86/surface3-wmi.c +++ b/drivers/platform/x86/surface3-wmi.c @@ -244,13 +244,11 @@ static int s3_wmi_remove(struct platform_device *device) return 0; } -#ifdef CONFIG_PM -static int s3_wmi_resume(struct device *dev) +static int __maybe_unused s3_wmi_resume(struct device *dev) { s3_wmi_send_lid_state(); return 0; } -#endif static SIMPLE_DEV_PM_OPS(s3_wmi_pm, NULL, s3_wmi_resume); static struct platform_driver s3_wmi_driver = { From e95ac4574b23a5fd8f5c5f2c19ef69ac15b7252c Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Wed, 18 Jan 2017 09:13:46 +0100 Subject: [PATCH 609/645] platform/x86: surface3-wmi: fix uninitialized symbol The patch 3dda3b3798f9: "platform/x86: Add custom surface3 platform device for controlling LID" from Nov 25, 2016, leads to the following static checker warning: drivers/platform/x86/surface3-wmi.c:168 s3_wmi_check_platform_device() error: uninitialized symbol 'ts_adev'. Reported-by: Dan Carpenter Signed-off-by: Benjamin Tissoires Signed-off-by: Andy Shevchenko --- drivers/platform/x86/surface3-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/surface3-wmi.c b/drivers/platform/x86/surface3-wmi.c index 6ac1d1349d7e..25b176996cb7 100644 --- a/drivers/platform/x86/surface3-wmi.c +++ b/drivers/platform/x86/surface3-wmi.c @@ -139,7 +139,7 @@ static acpi_status s3_wmi_attach_spi_device(acpi_handle handle, static int s3_wmi_check_platform_device(struct device *dev, void *data) { - struct acpi_device *adev, *ts_adev; + struct acpi_device *adev, *ts_adev = NULL; acpi_handle handle; acpi_status status; From 5a00b6c2438460b870a451f14593fc40d3c7edf6 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 19 Jan 2017 18:39:40 +0200 Subject: [PATCH 610/645] platform/x86: intel_mid_powerbtn: Set IRQ_ONESHOT The commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") starts refusing misconfigured interrupt handlers. This makes intel_mid_powerbtn not working anymore. Add a mandatory flag to a threaded IRQ request in the driver. Fixes: 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") Signed-off-by: Andy Shevchenko --- drivers/platform/x86/intel_mid_powerbtn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c index 1fc0de870ff8..361770568ad0 100644 --- a/drivers/platform/x86/intel_mid_powerbtn.c +++ b/drivers/platform/x86/intel_mid_powerbtn.c @@ -77,7 +77,7 @@ static int mfld_pb_probe(struct platform_device *pdev) input_set_capability(input, EV_KEY, KEY_POWER); - error = request_threaded_irq(irq, NULL, mfld_pb_isr, 0, + error = request_threaded_irq(irq, NULL, mfld_pb_isr, IRQF_ONESHOT, DRIVER_NAME, input); if (error) { dev_err(&pdev->dev, "Unable to request irq %d for mfld power" From cfee5d63767b2e7997c1f36420d008abbe61565c Mon Sep 17 00:00:00 2001 From: Zach Ploskey Date: Sun, 22 Jan 2017 00:47:19 -0800 Subject: [PATCH 611/645] platform/x86: ideapad-laptop: handle ACPI event 1 On Ideapad laptops, ACPI event 1 is currently not handled. Many models log "ideapad_laptop: Unknown event: 1" every 20 seconds or so while running on battery power. Some convertible laptops receive this event when switching in and out of tablet mode. This adds and additional case for event 1 in ideapad_acpi_notify to call ideapad_input_report(priv, vpc_bit), so that the event is reported to userspace and we avoid unnecessary logging. Fixes bug #107481 (https://bugzilla.kernel.org/show_bug.cgi?id=107481) Fixes bug #65751 (https://bugzilla.kernel.org/show_bug.cgi?id=65751) Signed-off-by: Zach Ploskey Signed-off-by: Andy Shevchenko --- drivers/platform/x86/ideapad-laptop.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 410741acb3c9..f46ece2ce3c4 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -813,6 +813,7 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) case 8: case 7: case 6: + case 1: ideapad_input_report(priv, vpc_bit); break; case 5: From 7a308bb3016f57e5be11a677d15b821536419d36 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 22 Jan 2017 12:54:15 -0800 Subject: [PATCH 612/645] Linux 4.10-rc5 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 96e2352d10a8..098840012b9b 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 4 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc4 -NAME = Roaring Lionus +EXTRAVERSION = -rc5 +NAME = Anniversary Edition # *DOCUMENTATION* # To see a list of typical targets execute "make help" From 880a38547ff08715ce4f1daf9a4bb30c87676e68 Mon Sep 17 00:00:00 2001 From: Nikolay Borisov Date: Fri, 20 Jan 2017 15:21:35 +0200 Subject: [PATCH 613/645] userns: Make ucounts lock irq-safe The ucounts_lock is being used to protect various ucounts lifecycle management functionalities. However, those services can also be invoked when a pidns is being freed in an RCU callback (e.g. softirq context). This can lead to deadlocks. There were already efforts trying to prevent similar deadlocks in add7c65ca426 ("pid: fix lockdep deadlock warning due to ucount_lock"), however they just moved the context from hardirq to softrq. Fix this issue once and for all by explictly making the lock disable irqs altogether. Dmitry Vyukov reported: > I've got the following deadlock report while running syzkaller fuzzer > on eec0d3d065bfcdf9cd5f56dd2a36b94d12d32297 of linux-next (on odroid > device if it matters): > > ================================= > [ INFO: inconsistent lock state ] > 4.10.0-rc3-next-20170112-xc2-dirty #6 Not tainted > --------------------------------- > inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. > swapper/2/0 [HC0[0]:SC1[1]:HE1:SE0] takes: > (ucounts_lock){+.?...}, at: [< inline >] spin_lock > ./include/linux/spinlock.h:302 > (ucounts_lock){+.?...}, at: [] > put_ucounts+0x60/0x138 kernel/ucount.c:162 > {SOFTIRQ-ON-W} state was registered at: > [] mark_lock+0x220/0xb60 kernel/locking/lockdep.c:3054 > [< inline >] mark_irqflags kernel/locking/lockdep.c:2941 > [] __lock_acquire+0x388/0x3260 kernel/locking/lockdep.c:3295 > [] lock_acquire+0xa4/0x138 kernel/locking/lockdep.c:3753 > [< inline >] __raw_spin_lock ./include/linux/spinlock_api_smp.h:144 > [] _raw_spin_lock+0x90/0xd0 kernel/locking/spinlock.c:151 > [< inline >] spin_lock ./include/linux/spinlock.h:302 > [< inline >] get_ucounts kernel/ucount.c:131 > [] inc_ucount+0x80/0x6c8 kernel/ucount.c:189 > [< inline >] inc_mnt_namespaces fs/namespace.c:2818 > [] alloc_mnt_ns+0x78/0x3a8 fs/namespace.c:2849 > [] create_mnt_ns+0x28/0x200 fs/namespace.c:2959 > [< inline >] init_mount_tree fs/namespace.c:3199 > [] mnt_init+0x258/0x384 fs/namespace.c:3251 > [] vfs_caches_init+0x6c/0x80 fs/dcache.c:3626 > [] start_kernel+0x414/0x460 init/main.c:648 > [] __primary_switched+0x6c/0x70 arch/arm64/kernel/head.S:456 > irq event stamp: 2316924 > hardirqs last enabled at (2316924): [< inline >] rcu_do_batch > kernel/rcu/tree.c:2911 > hardirqs last enabled at (2316924): [< inline >] > invoke_rcu_callbacks kernel/rcu/tree.c:3182 > hardirqs last enabled at (2316924): [< inline >] > __rcu_process_callbacks kernel/rcu/tree.c:3149 > hardirqs last enabled at (2316924): [] > rcu_process_callbacks+0x7a4/0xc28 kernel/rcu/tree.c:3166 > hardirqs last disabled at (2316923): [< inline >] rcu_do_batch > kernel/rcu/tree.c:2900 > hardirqs last disabled at (2316923): [< inline >] > invoke_rcu_callbacks kernel/rcu/tree.c:3182 > hardirqs last disabled at (2316923): [< inline >] > __rcu_process_callbacks kernel/rcu/tree.c:3149 > hardirqs last disabled at (2316923): [] > rcu_process_callbacks+0x210/0xc28 kernel/rcu/tree.c:3166 > softirqs last enabled at (2316912): [] > _local_bh_enable+0x4c/0x80 kernel/softirq.c:155 > softirqs last disabled at (2316913): [< inline >] > do_softirq_own_stack ./include/linux/interrupt.h:488 > softirqs last disabled at (2316913): [< inline >] > invoke_softirq kernel/softirq.c:371 > softirqs last disabled at (2316913): [] > irq_exit+0x264/0x308 kernel/softirq.c:405 > > other info that might help us debug this: > Possible unsafe locking scenario: > > CPU0 > ---- > lock(ucounts_lock); > > lock(ucounts_lock); > > *** DEADLOCK *** > > 1 lock held by swapper/2/0: > #0: (rcu_callback){......}, at: [< inline >] __rcu_reclaim > kernel/rcu/rcu.h:108 > #0: (rcu_callback){......}, at: [< inline >] rcu_do_batch > kernel/rcu/tree.c:2919 > #0: (rcu_callback){......}, at: [< inline >] > invoke_rcu_callbacks kernel/rcu/tree.c:3182 > #0: (rcu_callback){......}, at: [< inline >] > __rcu_process_callbacks kernel/rcu/tree.c:3149 > #0: (rcu_callback){......}, at: [] > rcu_process_callbacks+0x720/0xc28 kernel/rcu/tree.c:3166 > > stack backtrace: > CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.10.0-rc3-next-20170112-xc2-dirty #6 > Hardware name: Hardkernel ODROID-C2 (DT) > Call trace: > [] dump_backtrace+0x0/0x440 arch/arm64/kernel/traps.c:500 > [] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:225 > [] dump_stack+0x110/0x168 > [] print_usage_bug.part.27+0x49c/0x4bc > kernel/locking/lockdep.c:2387 > [< inline >] print_usage_bug kernel/locking/lockdep.c:2357 > [< inline >] valid_state kernel/locking/lockdep.c:2400 > [< inline >] mark_lock_irq kernel/locking/lockdep.c:2617 > [] mark_lock+0x934/0xb60 kernel/locking/lockdep.c:3065 > [< inline >] mark_irqflags kernel/locking/lockdep.c:2923 > [] __lock_acquire+0x640/0x3260 kernel/locking/lockdep.c:3295 > [] lock_acquire+0xa4/0x138 kernel/locking/lockdep.c:3753 > [< inline >] __raw_spin_lock ./include/linux/spinlock_api_smp.h:144 > [] _raw_spin_lock+0x90/0xd0 kernel/locking/spinlock.c:151 > [< inline >] spin_lock ./include/linux/spinlock.h:302 > [] put_ucounts+0x60/0x138 kernel/ucount.c:162 > [] dec_ucount+0xf4/0x158 kernel/ucount.c:214 > [< inline >] dec_pid_namespaces kernel/pid_namespace.c:89 > [] delayed_free_pidns+0x40/0xe0 kernel/pid_namespace.c:156 > [< inline >] __rcu_reclaim kernel/rcu/rcu.h:118 > [< inline >] rcu_do_batch kernel/rcu/tree.c:2919 > [< inline >] invoke_rcu_callbacks kernel/rcu/tree.c:3182 > [< inline >] __rcu_process_callbacks kernel/rcu/tree.c:3149 > [] rcu_process_callbacks+0x768/0xc28 kernel/rcu/tree.c:3166 > [] __do_softirq+0x324/0x6e0 kernel/softirq.c:284 > [< inline >] do_softirq_own_stack ./include/linux/interrupt.h:488 > [< inline >] invoke_softirq kernel/softirq.c:371 > [] irq_exit+0x264/0x308 kernel/softirq.c:405 > [] __handle_domain_irq+0xc0/0x150 kernel/irq/irqdesc.c:636 > [] gic_handle_irq+0x68/0xd8 > Exception stack(0xffff8000648e7dd0 to 0xffff8000648e7f00) > 7dc0: ffff8000648d4b3c 0000000000000007 > 7de0: 0000000000000000 1ffff0000c91a967 1ffff0000c91a967 1ffff0000c91a967 > 7e00: ffff20000a4b6b68 0000000000000001 0000000000000007 0000000000000001 > 7e20: 1fffe4000149ae90 ffff200009d35000 0000000000000000 0000000000000002 > 7e40: 0000000000000000 0000000000000000 0000000002624a1a 0000000000000000 > 7e60: 0000000000000000 ffff200009cbcd88 000060006d2ed000 0000000000000140 > 7e80: ffff200009cff000 ffff200009cb6000 ffff200009cc2020 ffff200009d2159d > 7ea0: 0000000000000000 ffff8000648d4380 0000000000000000 ffff8000648e7f00 > 7ec0: ffff20000820a478 ffff8000648e7f00 ffff20000820a47c 0000000010000145 > 7ee0: 0000000000000140 dfff200000000000 ffffffffffffffff ffff20000820a478 > [] el1_irq+0xb8/0x130 arch/arm64/kernel/entry.S:486 > [< inline >] arch_local_irq_restore > ./arch/arm64/include/asm/irqflags.h:81 > [] rcu_idle_exit+0x64/0xa8 kernel/rcu/tree.c:1030 > [< inline >] cpuidle_idle_call kernel/sched/idle.c:200 > [] do_idle+0x1dc/0x2d0 kernel/sched/idle.c:243 > [] cpu_startup_entry+0x24/0x28 kernel/sched/idle.c:345 > [] secondary_start_kernel+0x2cc/0x358 > arch/arm64/kernel/smp.c:276 > [<000000000279f1a4>] 0x279f1a4 Reported-by: Dmitry Vyukov Tested-by: Dmitry Vyukov Fixes: add7c65ca426 ("pid: fix lockdep deadlock warning due to ucount_lock") Fixes: f333c700c610 ("pidns: Add a limit on the number of pid namespaces") Cc: stable@vger.kernel.org Link: https://www.spinics.net/lists/kernel/msg2426637.html Signed-off-by: Nikolay Borisov Signed-off-by: Eric W. Biederman --- kernel/ucount.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/kernel/ucount.c b/kernel/ucount.c index 9d20d5dd298a..4bbd38ec3788 100644 --- a/kernel/ucount.c +++ b/kernel/ucount.c @@ -128,10 +128,10 @@ static struct ucounts *get_ucounts(struct user_namespace *ns, kuid_t uid) struct hlist_head *hashent = ucounts_hashentry(ns, uid); struct ucounts *ucounts, *new; - spin_lock(&ucounts_lock); + spin_lock_irq(&ucounts_lock); ucounts = find_ucounts(ns, uid, hashent); if (!ucounts) { - spin_unlock(&ucounts_lock); + spin_unlock_irq(&ucounts_lock); new = kzalloc(sizeof(*new), GFP_KERNEL); if (!new) @@ -141,7 +141,7 @@ static struct ucounts *get_ucounts(struct user_namespace *ns, kuid_t uid) new->uid = uid; atomic_set(&new->count, 0); - spin_lock(&ucounts_lock); + spin_lock_irq(&ucounts_lock); ucounts = find_ucounts(ns, uid, hashent); if (ucounts) { kfree(new); @@ -152,16 +152,18 @@ static struct ucounts *get_ucounts(struct user_namespace *ns, kuid_t uid) } if (!atomic_add_unless(&ucounts->count, 1, INT_MAX)) ucounts = NULL; - spin_unlock(&ucounts_lock); + spin_unlock_irq(&ucounts_lock); return ucounts; } static void put_ucounts(struct ucounts *ucounts) { + unsigned long flags; + if (atomic_dec_and_test(&ucounts->count)) { - spin_lock(&ucounts_lock); + spin_lock_irqsave(&ucounts_lock, flags); hlist_del_init(&ucounts->node); - spin_unlock(&ucounts_lock); + spin_unlock_irqrestore(&ucounts_lock, flags); kfree(ucounts); } From 7b9e1d89e1b6a3b99a8fdd949aa0f98dd5bf2f6b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 24 Jan 2017 17:22:01 +0200 Subject: [PATCH 614/645] MAINTAINERS: Add myself to X86 PLATFORM DRIVERS as a co-maintainer For last few months Darren and I are co-maintaining PDx86 subsystem. Make this fact official by updating MAINTAINERS database. Acked-by: Darren Hart Signed-off-by: Andy Shevchenko --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index c36976d3bd1a..235d66237938 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13436,6 +13436,7 @@ F: arch/x86/ X86 PLATFORM DRIVERS M: Darren Hart +M: Andy Shevchenko L: platform-driver-x86@vger.kernel.org T: git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git S: Maintained From 0516ffd88fa0d006ee80389ce14a9ca5ae45e845 Mon Sep 17 00:00:00 2001 From: Stefan Hajnoczi Date: Thu, 19 Jan 2017 10:43:53 +0000 Subject: [PATCH 615/645] vhost/vsock: handle vhost_vq_init_access() error Propagate the error when vhost_vq_init_access() fails and set vq->private_data to NULL. Signed-off-by: Stefan Hajnoczi Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vsock.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c index bbbf588540ed..ce5e63d2c66a 100644 --- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -373,6 +373,7 @@ static void vhost_vsock_handle_rx_kick(struct vhost_work *work) static int vhost_vsock_start(struct vhost_vsock *vsock) { + struct vhost_virtqueue *vq; size_t i; int ret; @@ -383,19 +384,20 @@ static int vhost_vsock_start(struct vhost_vsock *vsock) goto err; for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) { - struct vhost_virtqueue *vq = &vsock->vqs[i]; + vq = &vsock->vqs[i]; mutex_lock(&vq->mutex); if (!vhost_vq_access_ok(vq)) { ret = -EFAULT; - mutex_unlock(&vq->mutex); goto err_vq; } if (!vq->private_data) { vq->private_data = vsock; - vhost_vq_init_access(vq); + ret = vhost_vq_init_access(vq); + if (ret) + goto err_vq; } mutex_unlock(&vq->mutex); @@ -405,8 +407,11 @@ static int vhost_vsock_start(struct vhost_vsock *vsock) return 0; err_vq: + vq->private_data = NULL; + mutex_unlock(&vq->mutex); + for (i = 0; i < ARRAY_SIZE(vsock->vqs); i++) { - struct vhost_virtqueue *vq = &vsock->vqs[i]; + vq = &vsock->vqs[i]; mutex_lock(&vq->mutex); vq->private_data = NULL; From f7f6634d23830ff74335734fbdb28ea109c1f349 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Tue, 10 Jan 2017 17:51:17 +0000 Subject: [PATCH 616/645] virtio_mmio: Set DMA masks appropriately Once DMA API usage is enabled, it becomes apparent that virtio-mmio is inadvertently relying on the default 32-bit DMA mask, which leads to problems like rapidly exhausting SWIOTLB bounce buffers. Ensure that we set the appropriate 64-bit DMA mask whenever possible, with the coherent mask suitably limited for the legacy vring as per a0be1db4304f ("virtio_pci: Limit DMA mask to 44 bits for legacy virtio devices"). Cc: Andy Lutomirski Cc: Michael S. Tsirkin Reported-by: Jean-Philippe Brucker Fixes: b42111382f0e ("virtio_mmio: Use the DMA API if enabled") Signed-off-by: Robin Murphy Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_mmio.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c index d47a2fcef818..c71fde5fe835 100644 --- a/drivers/virtio/virtio_mmio.c +++ b/drivers/virtio/virtio_mmio.c @@ -59,6 +59,7 @@ #define pr_fmt(fmt) "virtio-mmio: " fmt #include +#include #include #include #include @@ -498,6 +499,7 @@ static int virtio_mmio_probe(struct platform_device *pdev) struct virtio_mmio_device *vm_dev; struct resource *mem; unsigned long magic; + int rc; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) @@ -547,9 +549,25 @@ static int virtio_mmio_probe(struct platform_device *pdev) } vm_dev->vdev.id.vendor = readl(vm_dev->base + VIRTIO_MMIO_VENDOR_ID); - if (vm_dev->version == 1) + if (vm_dev->version == 1) { writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE); + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); + /* + * In the legacy case, ensure our coherently-allocated virtio + * ring will be at an address expressable as a 32-bit PFN. + */ + if (!rc) + dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32 + PAGE_SHIFT)); + } else { + rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + } + if (rc) + rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) + dev_warn(&pdev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n"); + platform_set_drvdata(pdev, vm_dev); return register_virtio_device(&vm_dev->vdev); From c7070619f3408d9a0dffbed9149e6f00479cf43b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Jan 2017 10:33:32 +0000 Subject: [PATCH 617/645] vring: Force use of DMA API for ARM-based systems with legacy devices Booting Linux on an ARM fastmodel containing an SMMU emulation results in an unexpected I/O page fault from the legacy virtio-blk PCI device: [ 1.211721] arm-smmu-v3 2b400000.smmu: event 0x10 received: [ 1.211800] arm-smmu-v3 2b400000.smmu: 0x00000000fffff010 [ 1.211880] arm-smmu-v3 2b400000.smmu: 0x0000020800000000 [ 1.211959] arm-smmu-v3 2b400000.smmu: 0x00000008fa081002 [ 1.212075] arm-smmu-v3 2b400000.smmu: 0x0000000000000000 [ 1.212155] arm-smmu-v3 2b400000.smmu: event 0x10 received: [ 1.212234] arm-smmu-v3 2b400000.smmu: 0x00000000fffff010 [ 1.212314] arm-smmu-v3 2b400000.smmu: 0x0000020800000000 [ 1.212394] arm-smmu-v3 2b400000.smmu: 0x00000008fa081000 [ 1.212471] arm-smmu-v3 2b400000.smmu: 0x0000000000000000 This is because the legacy virtio-blk device is behind an SMMU, so we have consequently swizzled its DMA ops and configured the SMMU to translate accesses. This then requires the vring code to use the DMA API to establish translations, otherwise all transactions will result in fatal faults and termination. Given that ARM-based systems only see an SMMU if one is really present (the topology is all described by firmware tables such as device-tree or IORT), then we can safely use the DMA API for all legacy virtio devices. Modern devices can advertise the prescense of an IOMMU using the VIRTIO_F_IOMMU_PLATFORM feature flag. Cc: Andy Lutomirski Cc: Michael S. Tsirkin Cc: Fixes: 876945dbf649 ("arm64: Hook up IOMMU dma_ops") Signed-off-by: Will Deacon Signed-off-by: Michael S. Tsirkin Acked-by: Marc Zyngier --- drivers/virtio/virtio_ring.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 409aeaa49246..7e38ed79c3fc 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -159,6 +159,13 @@ static bool vring_use_dma_api(struct virtio_device *vdev) if (xen_domain()) return true; + /* + * On ARM-based machines, the DMA ops will do the right thing, + * so always use them with legacy devices. + */ + if (IS_ENABLED(CONFIG_ARM) || IS_ENABLED(CONFIG_ARM64)) + return !virtio_has_feature(vdev, VIRTIO_F_VERSION_1); + return false; } From 8a1f780e7f28c7c1d640118242cf68d528c456cd Mon Sep 17 00:00:00 2001 From: Yasuaki Ishimatsu Date: Tue, 24 Jan 2017 15:17:45 -0800 Subject: [PATCH 618/645] memory_hotplug: make zone_can_shift() return a boolean value online_{kernel|movable} is used to change the memory zone to ZONE_{NORMAL|MOVABLE} and online the memory. To check that memory zone can be changed, zone_can_shift() is used. Currently the function returns minus integer value, plus integer value and 0. When the function returns minus or plus integer value, it means that the memory zone can be changed to ZONE_{NORNAL|MOVABLE}. But when the function returns 0, there are two meanings. One of the meanings is that the memory zone does not need to be changed. For example, when memory is in ZONE_NORMAL and onlined by online_kernel the memory zone does not need to be changed. Another meaning is that the memory zone cannot be changed. When memory is in ZONE_NORMAL and onlined by online_movable, the memory zone may not be changed to ZONE_MOVALBE due to memory online limitation(see Documentation/memory-hotplug.txt). In this case, memory must not be onlined. The patch changes the return type of zone_can_shift() so that memory online operation fails when memory zone cannot be changed as follows: Before applying patch: # grep -A 35 "Node 2" /proc/zoneinfo Node 2, zone Normal node_scanned 0 spanned 8388608 present 7864320 managed 7864320 # echo online_movable > memory4097/state # grep -A 35 "Node 2" /proc/zoneinfo Node 2, zone Normal node_scanned 0 spanned 8388608 present 8388608 managed 8388608 online_movable operation succeeded. But memory is onlined as ZONE_NORMAL, not ZONE_MOVABLE. After applying patch: # grep -A 35 "Node 2" /proc/zoneinfo Node 2, zone Normal node_scanned 0 spanned 8388608 present 7864320 managed 7864320 # echo online_movable > memory4097/state bash: echo: write error: Invalid argument # grep -A 35 "Node 2" /proc/zoneinfo Node 2, zone Normal node_scanned 0 spanned 8388608 present 7864320 managed 7864320 online_movable operation failed because of failure of changing the memory zone from ZONE_NORMAL to ZONE_MOVABLE Fixes: df429ac03936 ("memory-hotplug: more general validation of zone during online") Link: http://lkml.kernel.org/r/2f9c3837-33d7-b6e5-59c0-6ca4372b2d84@gmail.com Signed-off-by: Yasuaki Ishimatsu Reviewed-by: Reza Arbab Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/memory.c | 4 ++-- include/linux/memory_hotplug.h | 4 ++-- mm/memory_hotplug.c | 28 +++++++++++++++++----------- 3 files changed, 21 insertions(+), 15 deletions(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index 8ab8ea1253e6..dacb6a8418aa 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -408,14 +408,14 @@ static ssize_t show_valid_zones(struct device *dev, sprintf(buf, "%s", zone->name); /* MMOP_ONLINE_KERNEL */ - zone_shift = zone_can_shift(start_pfn, nr_pages, ZONE_NORMAL); + zone_can_shift(start_pfn, nr_pages, ZONE_NORMAL, &zone_shift); if (zone_shift) { strcat(buf, " "); strcat(buf, (zone + zone_shift)->name); } /* MMOP_ONLINE_MOVABLE */ - zone_shift = zone_can_shift(start_pfn, nr_pages, ZONE_MOVABLE); + zone_can_shift(start_pfn, nr_pages, ZONE_MOVABLE, &zone_shift); if (zone_shift) { strcat(buf, " "); strcat(buf, (zone + zone_shift)->name); diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 01033fadea47..c1784c0b4f35 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -284,7 +284,7 @@ extern void sparse_remove_one_section(struct zone *zone, struct mem_section *ms, unsigned long map_offset); extern struct page *sparse_decode_mem_map(unsigned long coded_mem_map, unsigned long pnum); -extern int zone_can_shift(unsigned long pfn, unsigned long nr_pages, - enum zone_type target); +extern bool zone_can_shift(unsigned long pfn, unsigned long nr_pages, + enum zone_type target, int *zone_shift); #endif /* __LINUX_MEMORY_HOTPLUG_H */ diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index e43142c15631..ca2723d47338 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1033,36 +1033,39 @@ static void node_states_set_node(int node, struct memory_notify *arg) node_set_state(node, N_MEMORY); } -int zone_can_shift(unsigned long pfn, unsigned long nr_pages, - enum zone_type target) +bool zone_can_shift(unsigned long pfn, unsigned long nr_pages, + enum zone_type target, int *zone_shift) { struct zone *zone = page_zone(pfn_to_page(pfn)); enum zone_type idx = zone_idx(zone); int i; + *zone_shift = 0; + if (idx < target) { /* pages must be at end of current zone */ if (pfn + nr_pages != zone_end_pfn(zone)) - return 0; + return false; /* no zones in use between current zone and target */ for (i = idx + 1; i < target; i++) if (zone_is_initialized(zone - idx + i)) - return 0; + return false; } if (target < idx) { /* pages must be at beginning of current zone */ if (pfn != zone->zone_start_pfn) - return 0; + return false; /* no zones in use between current zone and target */ for (i = target + 1; i < idx; i++) if (zone_is_initialized(zone - idx + i)) - return 0; + return false; } - return target - idx; + *zone_shift = target - idx; + return true; } /* Must be protected by mem_hotplug_begin() */ @@ -1089,10 +1092,13 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, int online_typ !can_online_high_movable(zone)) return -EINVAL; - if (online_type == MMOP_ONLINE_KERNEL) - zone_shift = zone_can_shift(pfn, nr_pages, ZONE_NORMAL); - else if (online_type == MMOP_ONLINE_MOVABLE) - zone_shift = zone_can_shift(pfn, nr_pages, ZONE_MOVABLE); + if (online_type == MMOP_ONLINE_KERNEL) { + if (!zone_can_shift(pfn, nr_pages, ZONE_NORMAL, &zone_shift)) + return -EINVAL; + } else if (online_type == MMOP_ONLINE_MOVABLE) { + if (!zone_can_shift(pfn, nr_pages, ZONE_MOVABLE, &zone_shift)) + return -EINVAL; + } zone = move_pfn_range(zone_shift, pfn, pfn + nr_pages); if (!zone) From 8310d48b125d19fcd9521d83b8293e63eb1646aa Mon Sep 17 00:00:00 2001 From: Keno Fischer Date: Tue, 24 Jan 2017 15:17:48 -0800 Subject: [PATCH 619/645] mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp In commit 19be0eaffa3a ("mm: remove gup_flags FOLL_WRITE games from __get_user_pages()"), the mm code was changed from unsetting FOLL_WRITE after a COW was resolved to setting the (newly introduced) FOLL_COW instead. Simultaneously, the check in gup.c was updated to still allow writes with FOLL_FORCE set if FOLL_COW had also been set. However, a similar check in huge_memory.c was forgotten. As a result, remote memory writes to ro regions of memory backed by transparent huge pages cause an infinite loop in the kernel (handle_mm_fault sets FOLL_COW and returns 0 causing a retry, but follow_trans_huge_pmd bails out immidiately because `(flags & FOLL_WRITE) && !pmd_write(*pmd)` is true. While in this state the process is stil SIGKILLable, but little else works (e.g. no ptrace attach, no other signals). This is easily reproduced with the following code (assuming thp are set to always): #include #include #include #include #include #include #include #include #include #include #define TEST_SIZE 5 * 1024 * 1024 int main(void) { int status; pid_t child; int fd = open("/proc/self/mem", O_RDWR); void *addr = mmap(NULL, TEST_SIZE, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); assert(addr != MAP_FAILED); pid_t parent_pid = getpid(); if ((child = fork()) == 0) { void *addr2 = mmap(NULL, TEST_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); assert(addr2 != MAP_FAILED); memset(addr2, 'a', TEST_SIZE); pwrite(fd, addr2, TEST_SIZE, (uintptr_t)addr); return 0; } assert(child == waitpid(child, &status, 0)); assert(WIFEXITED(status) && WEXITSTATUS(status) == 0); return 0; } Fix this by updating follow_trans_huge_pmd in huge_memory.c analogously to the update in gup.c in the original commit. The same pattern exists in follow_devmap_pmd. However, we should not be able to reach that check with FOLL_COW set, so add WARN_ONCE to make sure we notice if we ever do. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170106015025.GA38411@juliacomputing.com Signed-off-by: Keno Fischer Acked-by: Kirill A. Shutemov Cc: Greg Thelen Cc: Nicholas Piggin Cc: Willy Tarreau Cc: Oleg Nesterov Cc: Kees Cook Cc: Andy Lutomirski Cc: Michal Hocko Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 9a6bd6c8d55a..5f3ad65c85de 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -783,6 +783,12 @@ struct page *follow_devmap_pmd(struct vm_area_struct *vma, unsigned long addr, assert_spin_locked(pmd_lockptr(mm, pmd)); + /* + * When we COW a devmap PMD entry, we split it into PTEs, so we should + * not be in this function with `flags & FOLL_COW` set. + */ + WARN_ONCE(flags & FOLL_COW, "mm: In follow_devmap_pmd with FOLL_COW set"); + if (flags & FOLL_WRITE && !pmd_write(*pmd)) return NULL; @@ -1128,6 +1134,16 @@ out_unlock: return ret; } +/* + * FOLL_FORCE can write to even unwritable pmd's, but only + * after we've gone through a COW cycle and they are dirty. + */ +static inline bool can_follow_write_pmd(pmd_t pmd, unsigned int flags) +{ + return pmd_write(pmd) || + ((flags & FOLL_FORCE) && (flags & FOLL_COW) && pmd_dirty(pmd)); +} + struct page *follow_trans_huge_pmd(struct vm_area_struct *vma, unsigned long addr, pmd_t *pmd, @@ -1138,7 +1154,7 @@ struct page *follow_trans_huge_pmd(struct vm_area_struct *vma, assert_spin_locked(pmd_lockptr(mm, pmd)); - if (flags & FOLL_WRITE && !pmd_write(*pmd)) + if (flags & FOLL_WRITE && !can_follow_write_pmd(*pmd, flags)) goto out; /* Avoid dumping huge zero page */ From 6affb9d7b137fc93d86c926a5587e77b8bc64255 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 24 Jan 2017 15:17:51 -0800 Subject: [PATCH 620/645] dax: fix build warnings with FS_DAX and !FS_IOMAP As reported by Arnd: https://lkml.org/lkml/2017/1/10/756 Compiling with the following configuration: # CONFIG_EXT2_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_XFS_FS is not set # CONFIG_FS_IOMAP depends on the above filesystems, as is not set CONFIG_FS_DAX=y generates build warnings about unused functions in fs/dax.c: fs/dax.c:878:12: warning: `dax_insert_mapping' defined but not used [-Wunused-function] static int dax_insert_mapping(struct address_space *mapping, ^~~~~~~~~~~~~~~~~~ fs/dax.c:572:12: warning: `copy_user_dax' defined but not used [-Wunused-function] static int copy_user_dax(struct block_device *bdev, sector_t sector, size_t size, ^~~~~~~~~~~~~ fs/dax.c:542:12: warning: `dax_load_hole' defined but not used [-Wunused-function] static int dax_load_hole(struct address_space *mapping, void **entry, ^~~~~~~~~~~~~ fs/dax.c:312:14: warning: `grab_mapping_entry' defined but not used [-Wunused-function] static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index, ^~~~~~~~~~~~~~~~~~ Now that the struct buffer_head based DAX fault paths and I/O path have been removed we really depend on iomap support being present for DAX. Make this explicit by selecting FS_IOMAP if we compile in DAX support. This allows us to remove conditional selections of FS_IOMAP when FS_DAX was present for ext2 and ext4, and to remove an #ifdef in fs/dax.c. Link: http://lkml.kernel.org/r/1484087383-29478-1-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler Reported-by: Arnd Bergmann Reviewed-by: Christoph Hellwig Reviewed-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/Kconfig | 1 + fs/dax.c | 2 -- fs/ext2/Kconfig | 1 - fs/ext4/Kconfig | 1 - 4 files changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/Kconfig b/fs/Kconfig index c2a377cdda2b..83eab52fb3f6 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -38,6 +38,7 @@ config FS_DAX bool "Direct Access (DAX) support" depends on MMU depends on !(ARM || MIPS || SPARC) + select FS_IOMAP help Direct Access (DAX) can be used on memory-backed block devices. If the block device supports DAX and the filesystem supports DAX, diff --git a/fs/dax.c b/fs/dax.c index ddcddfeaa03b..3af2da5e64ce 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -990,7 +990,6 @@ int __dax_zero_page_range(struct block_device *bdev, sector_t sector, } EXPORT_SYMBOL_GPL(__dax_zero_page_range); -#ifdef CONFIG_FS_IOMAP static sector_t dax_iomap_sector(struct iomap *iomap, loff_t pos) { return iomap->blkno + (((pos & PAGE_MASK) - iomap->offset) >> 9); @@ -1428,4 +1427,3 @@ int dax_iomap_pmd_fault(struct vm_area_struct *vma, unsigned long address, } EXPORT_SYMBOL_GPL(dax_iomap_pmd_fault); #endif /* CONFIG_FS_DAX_PMD */ -#endif /* CONFIG_FS_IOMAP */ diff --git a/fs/ext2/Kconfig b/fs/ext2/Kconfig index 36bea5adcaba..c634874e12d9 100644 --- a/fs/ext2/Kconfig +++ b/fs/ext2/Kconfig @@ -1,6 +1,5 @@ config EXT2_FS tristate "Second extended fs support" - select FS_IOMAP if FS_DAX help Ext2 is a standard Linux file system for hard disks. diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig index 7b90691e98c4..e38039fd96ff 100644 --- a/fs/ext4/Kconfig +++ b/fs/ext4/Kconfig @@ -37,7 +37,6 @@ config EXT4_FS select CRC16 select CRYPTO select CRYPTO_CRC32C - select FS_IOMAP if FS_DAX help This is the next generation of the ext3 filesystem. From b94f51183b0617e7b9b4fb4137d4cf1cab7547c2 Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Tue, 24 Jan 2017 15:17:53 -0800 Subject: [PATCH 621/645] kernel/watchdog: prevent false hardlockup on overloaded system On an overloaded system, it is possible that a change in the watchdog threshold can be delayed long enough to trigger a false positive. This can easily be achieved by having a cpu spinning indefinitely on a task, while another cpu updates watchdog threshold. What happens is while trying to park the watchdog threads, the hrtimers on the other cpus trigger and reprogram themselves with the new slower watchdog threshold. Meanwhile, the nmi watchdog is still programmed with the old faster threshold. Because the one cpu is blocked, it prevents the thread parking on the other cpus from completing, which is needed to shutdown the nmi watchdog and reprogram it correctly. As a result, a false positive from the nmi watchdog is reported. Fix this by setting a park_in_progress flag to block all lockups until the parking is complete. Fix provided by Ulrich Obergfell. [akpm@linux-foundation.org: s/park_in_progress/watchdog_park_in_progress/] Link: http://lkml.kernel.org/r/1481041033-192236-1-git-send-email-dzickus@redhat.com Signed-off-by: Don Zickus Reviewed-by: Aaron Tomlin Cc: Ulrich Obergfell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nmi.h | 1 + kernel/watchdog.c | 9 +++++++++ kernel/watchdog_hld.c | 3 +++ 3 files changed, 13 insertions(+) diff --git a/include/linux/nmi.h b/include/linux/nmi.h index aacca824a6ae..0a3fadc32693 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -110,6 +110,7 @@ extern int watchdog_user_enabled; extern int watchdog_thresh; extern unsigned long watchdog_enabled; extern unsigned long *watchdog_cpumask_bits; +extern atomic_t watchdog_park_in_progress; #ifdef CONFIG_SMP extern int sysctl_softlockup_all_cpu_backtrace; extern int sysctl_hardlockup_all_cpu_backtrace; diff --git a/kernel/watchdog.c b/kernel/watchdog.c index d4b0fa01cae3..63177be0159e 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -49,6 +49,8 @@ unsigned long *watchdog_cpumask_bits = cpumask_bits(&watchdog_cpumask); #define for_each_watchdog_cpu(cpu) \ for_each_cpu_and((cpu), cpu_online_mask, &watchdog_cpumask) +atomic_t watchdog_park_in_progress = ATOMIC_INIT(0); + /* * The 'watchdog_running' variable is set to 1 when the watchdog threads * are registered/started and is set to 0 when the watchdog threads are @@ -260,6 +262,9 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer) int duration; int softlockup_all_cpu_backtrace = sysctl_softlockup_all_cpu_backtrace; + if (atomic_read(&watchdog_park_in_progress) != 0) + return HRTIMER_NORESTART; + /* kick the hardlockup detector */ watchdog_interrupt_count(); @@ -467,12 +472,16 @@ static int watchdog_park_threads(void) { int cpu, ret = 0; + atomic_set(&watchdog_park_in_progress, 1); + for_each_watchdog_cpu(cpu) { ret = kthread_park(per_cpu(softlockup_watchdog, cpu)); if (ret) break; } + atomic_set(&watchdog_park_in_progress, 0); + return ret; } diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c index 84016c8aee6b..12b8dd640786 100644 --- a/kernel/watchdog_hld.c +++ b/kernel/watchdog_hld.c @@ -84,6 +84,9 @@ static void watchdog_overflow_callback(struct perf_event *event, /* Ensure the watchdog never gets throttled */ event->hw.interrupts = 0; + if (atomic_read(&watchdog_park_in_progress) != 0) + return; + if (__this_cpu_read(watchdog_nmi_touch) == true) { __this_cpu_write(watchdog_nmi_touch, false); return; From de182cc8e882f74af2a112e09f148ce646937232 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 24 Jan 2017 15:17:56 -0800 Subject: [PATCH 622/645] drivers/memstick/core/memstick.c: avoid -Wnonnull warning gcc-7 produces a harmless false-postive warning about a possible NULL pointer access: drivers/memstick/core/memstick.c: In function 'h_memstick_read_dev_id': drivers/memstick/core/memstick.c:309:3: error: argument 2 null where non-null expected [-Werror=nonnull] memcpy(mrq->data, buf, mrq->data_len); This can't happen because the caller sets the command to 'MS_TPC_READ_REG', which causes the data direction to be 'READ' and the NULL pointer not accessed. As a simple workaround for the warning, we can pass a pointer to the data that we actually want to read into. This is not needed here, but also harmless, and lets the compiler know that the access is ok. Link: http://lkml.kernel.org/r/20170111144143.548867-1-arnd@arndb.de Signed-off-by: Arnd Bergmann Cc: Alex Dubov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/memstick/core/memstick.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c index a0547dbf9806..76382c858c35 100644 --- a/drivers/memstick/core/memstick.c +++ b/drivers/memstick/core/memstick.c @@ -330,7 +330,7 @@ static int h_memstick_read_dev_id(struct memstick_dev *card, struct ms_id_register id_reg; if (!(*mrq)) { - memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, NULL, + memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg, sizeof(struct ms_id_register)); *mrq = &card->current_mrq; return 0; From 15a77c6fe494f4b1757d30cd137fe66ab06a38c3 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Tue, 24 Jan 2017 15:17:59 -0800 Subject: [PATCH 623/645] userfaultfd: fix SIGBUS resulting from false rwsem wakeups With >=32 CPUs the userfaultfd selftest triggered a graceful but unexpected SIGBUS because VM_FAULT_RETRY was returned by handle_userfault() despite the UFFDIO_COPY wasn't completed. This seems caused by rwsem waking the thread blocked in handle_userfault() and we can't run up_read() before the wait_event sequence is complete. Keeping the wait_even sequence identical to the first one, would require running userfaultfd_must_wait() again to know if the loop should be repeated, and it would also require retaking the rwsem and revalidating the whole vma status. It seems simpler to wait the targeted wakeup so that if false wakeups materialize we still wait for our specific wakeup event, unless of course there are signals or the uffd was released. Debug code collecting the stack trace of the wakeup showed this: $ ./userfaultfd 100 99999 nr_pages: 25600, nr_pages_per_cpu: 800 bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2 bounces: 99997, mode: rnd ver poll, Bus error (core dumped) save_stack_trace+0x2b/0x50 try_to_wake_up+0x2a6/0x580 wake_up_q+0x32/0x70 rwsem_wake+0xe0/0x120 call_rwsem_wake+0x1b/0x30 up_write+0x3b/0x40 vm_mmap_pgoff+0x9c/0xc0 SyS_mmap_pgoff+0x1a9/0x240 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xbd 0xffffffffffffffff FAULT_FLAG_ALLOW_RETRY missing 70 CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xb8/0x112 handle_userfault+0x572/0x650 handle_mm_fault+0x12cb/0x1520 __do_page_fault+0x175/0x500 trace_do_page_fault+0x61/0x270 do_async_page_fault+0x19/0x90 async_page_fault+0x25/0x30 This always happens when the main userfault selftest thread is running clone() while glibc runs either mprotect or mmap (both taking mmap_sem down_write()) to allocate the thread stack of the background threads, while locking/userfault threads already run at full throttle and are susceptible to false wakeups that may cause handle_userfault() to return before than expected (which results in graceful SIGBUS at the next attempt). This was reproduced only with >=32 CPUs because the loop to start the thread where clone() is too quick with fewer CPUs, while with 32 CPUs there's already significant activity on ~32 locking and userfault threads when the last background threads are started with clone(). This >=32 CPUs SMP race condition is likely reproducible only with the selftest because of the much heavier userfault load it generates if compared to real apps. We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a patch floating around that provides it also hidden this problem but in reality only is successfully at hiding the problem. False wakeups could still happen again the second time handle_userfault() is invoked, even if it's a so rare race condition that getting false wakeups twice in a row is impossible to reproduce. This full fix is needed for correctness, the only alternative would be to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP support can stick to a strict "one more" VM_FAULT_RETRY logic (no need of returning it infinite times to avoid the SIGBUS). Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli Reported-by: Shubham Kumar Sharma Tested-by: Mike Kravetz Acked-by: Hillf Danton Cc: Michael Rapoport Cc: "Dr. David Alan Gilbert" Cc: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/userfaultfd.c | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-) diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index d96e2f30084b..43953e03c356 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -63,6 +63,7 @@ struct userfaultfd_wait_queue { struct uffd_msg msg; wait_queue_t wq; struct userfaultfd_ctx *ctx; + bool waken; }; struct userfaultfd_wake_range { @@ -86,6 +87,12 @@ static int userfaultfd_wake_function(wait_queue_t *wq, unsigned mode, if (len && (start > uwq->msg.arg.pagefault.address || start + len <= uwq->msg.arg.pagefault.address)) goto out; + WRITE_ONCE(uwq->waken, true); + /* + * The implicit smp_mb__before_spinlock in try_to_wake_up() + * renders uwq->waken visible to other CPUs before the task is + * waken. + */ ret = wake_up_state(wq->private, mode); if (ret) /* @@ -264,6 +271,7 @@ int handle_userfault(struct vm_fault *vmf, unsigned long reason) struct userfaultfd_wait_queue uwq; int ret; bool must_wait, return_to_userland; + long blocking_state; BUG_ON(!rwsem_is_locked(&mm->mmap_sem)); @@ -334,10 +342,13 @@ int handle_userfault(struct vm_fault *vmf, unsigned long reason) uwq.wq.private = current; uwq.msg = userfault_msg(vmf->address, vmf->flags, reason); uwq.ctx = ctx; + uwq.waken = false; return_to_userland = (vmf->flags & (FAULT_FLAG_USER|FAULT_FLAG_KILLABLE)) == (FAULT_FLAG_USER|FAULT_FLAG_KILLABLE); + blocking_state = return_to_userland ? TASK_INTERRUPTIBLE : + TASK_KILLABLE; spin_lock(&ctx->fault_pending_wqh.lock); /* @@ -350,8 +361,7 @@ int handle_userfault(struct vm_fault *vmf, unsigned long reason) * following the spin_unlock to happen before the list_add in * __add_wait_queue. */ - set_current_state(return_to_userland ? TASK_INTERRUPTIBLE : - TASK_KILLABLE); + set_current_state(blocking_state); spin_unlock(&ctx->fault_pending_wqh.lock); must_wait = userfaultfd_must_wait(ctx, vmf->address, vmf->flags, @@ -364,6 +374,29 @@ int handle_userfault(struct vm_fault *vmf, unsigned long reason) wake_up_poll(&ctx->fd_wqh, POLLIN); schedule(); ret |= VM_FAULT_MAJOR; + + /* + * False wakeups can orginate even from rwsem before + * up_read() however userfaults will wait either for a + * targeted wakeup on the specific uwq waitqueue from + * wake_userfault() or for signals or for uffd + * release. + */ + while (!READ_ONCE(uwq.waken)) { + /* + * This needs the full smp_store_mb() + * guarantee as the state write must be + * visible to other CPUs before reading + * uwq.waken from other CPUs. + */ + set_current_state(blocking_state); + if (READ_ONCE(uwq.waken) || + READ_ONCE(ctx->released) || + (return_to_userland ? signal_pending(current) : + fatal_signal_pending(current))) + break; + schedule(); + } } __set_current_state(TASK_RUNNING); From aa2efd5ea4041754da4046c3d2e7edaac9526258 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Tue, 24 Jan 2017 15:18:02 -0800 Subject: [PATCH 624/645] mm/slub.c: trace free objects at KERN_INFO Currently when trace is enabled (e.g. slub_debug=T,kmalloc-128 ) the trace messages are mostly output at KERN_INFO. However the trace code also calls print_section() to hexdump the head of a free object. This is hard coded to use KERN_ERR, meaning the console is deluged with trace messages even if we've asked for quiet. Fix this the obvious way but adding a level parameter to print_section(), allowing calls from the trace code to use the same trace level as other trace messages. Link: http://lkml.kernel.org/r/20170113154850.518-1-daniel.thompson@linaro.org Signed-off-by: Daniel Thompson Acked-by: Christoph Lameter Acked-by: David Rientjes Cc: Pekka Enberg Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 067598a00849..7aa6f433f4de 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -496,10 +496,11 @@ static inline int check_valid_pointer(struct kmem_cache *s, return 1; } -static void print_section(char *text, u8 *addr, unsigned int length) +static void print_section(char *level, char *text, u8 *addr, + unsigned int length) { metadata_access_enable(); - print_hex_dump(KERN_ERR, text, DUMP_PREFIX_ADDRESS, 16, 1, addr, + print_hex_dump(level, text, DUMP_PREFIX_ADDRESS, 16, 1, addr, length, 1); metadata_access_disable(); } @@ -636,14 +637,15 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p) p, p - addr, get_freepointer(s, p)); if (s->flags & SLAB_RED_ZONE) - print_section("Redzone ", p - s->red_left_pad, s->red_left_pad); + print_section(KERN_ERR, "Redzone ", p - s->red_left_pad, + s->red_left_pad); else if (p > addr + 16) - print_section("Bytes b4 ", p - 16, 16); + print_section(KERN_ERR, "Bytes b4 ", p - 16, 16); - print_section("Object ", p, min_t(unsigned long, s->object_size, - PAGE_SIZE)); + print_section(KERN_ERR, "Object ", p, + min_t(unsigned long, s->object_size, PAGE_SIZE)); if (s->flags & SLAB_RED_ZONE) - print_section("Redzone ", p + s->object_size, + print_section(KERN_ERR, "Redzone ", p + s->object_size, s->inuse - s->object_size); if (s->offset) @@ -658,7 +660,8 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p) if (off != size_from_object(s)) /* Beginning of the filler is the free pointer */ - print_section("Padding ", p + off, size_from_object(s) - off); + print_section(KERN_ERR, "Padding ", p + off, + size_from_object(s) - off); dump_stack(); } @@ -820,7 +823,7 @@ static int slab_pad_check(struct kmem_cache *s, struct page *page) end--; slab_err(s, page, "Padding overwritten. 0x%p-0x%p", fault, end - 1); - print_section("Padding ", end - remainder, remainder); + print_section(KERN_ERR, "Padding ", end - remainder, remainder); restore_bytes(s, "slab padding", POISON_INUSE, end - remainder, end); return 0; @@ -973,7 +976,7 @@ static void trace(struct kmem_cache *s, struct page *page, void *object, page->freelist); if (!alloc) - print_section("Object ", (void *)object, + print_section(KERN_INFO, "Object ", (void *)object, s->object_size); dump_stack(); From 424f6c4818bbf1b8ccf58aa012ecc19c0bb9b446 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 24 Jan 2017 15:18:05 -0800 Subject: [PATCH 625/645] mm: alloc_contig: re-allow CMA to compact FS pages Commit 73e64c51afc5 ("mm, compaction: allow compaction for GFP_NOFS requests") changed compation to skip FS pages if not explicitly allowed to touch them, but missed to update the CMA compact_control. This leads to a very high isolation failure rate, crippling performance of CMA even on a lightly loaded system. Re-allow CMA to compact FS pages by setting the correct GFP flags, restoring CMA behavior and performance to the kernel 4.9 level. Fixes: 73e64c51afc5 (mm, compaction: allow compaction for GFP_NOFS requests) Link: http://lkml.kernel.org/r/20170113115155.24335-1-l.stach@pengutronix.de Signed-off-by: Lucas Stach Acked-by: Michal Hocko Acked-by: Vlastimil Babka Cc: Joonsoo Kim Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d604d2596b7b..41d5e2e2d8ce 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -7248,6 +7248,7 @@ int alloc_contig_range(unsigned long start, unsigned long end, .zone = page_zone(pfn_to_page(start)), .mode = MIGRATE_SYNC, .ignore_skip_hint = true, + .gfp_mask = GFP_KERNEL, }; INIT_LIST_HEAD(&cc.migratepages); From 3ba4bceef23206349d4130ddf140819b365de7c8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 24 Jan 2017 15:18:07 -0800 Subject: [PATCH 626/645] proc: add a schedule point in proc_pid_readdir() We have seen proc_pid_readdir() invocations holding cpu for more than 50 ms. Add a cond_resched() to be gentle with other tasks. [akpm@linux-foundation.org: coding style fix] Link: http://lkml.kernel.org/r/1484238380.15816.42.camel@edumazet-glaptop3.roam.corp.google.com Signed-off-by: Eric Dumazet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/base.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/proc/base.c b/fs/proc/base.c index 8e7e61b28f31..87c9a9aacda3 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -3179,6 +3179,8 @@ int proc_pid_readdir(struct file *file, struct dir_context *ctx) iter.tgid += 1, iter = next_tgid(ns, iter)) { char name[PROC_NUMBUF]; int len; + + cond_resched(); if (!has_pid_permissions(ns, iter.task, 2)) continue; From 3674534b775354516e5c148ea48f51d4d1909a78 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 24 Jan 2017 15:18:10 -0800 Subject: [PATCH 627/645] mm, memcg: do not retry precharge charges When memory.move_charge_at_immigrate is enabled and precharges are depleted during move, mem_cgroup_move_charge_pte_range() will attempt to increase the size of the precharge. Prevent precharges from ever looping by setting __GFP_NORETRY. This was probably the intention of the GFP_KERNEL & ~__GFP_NORETRY, which is pointless as written. Fixes: 0029e19ebf84 ("mm: memcontrol: remove explicit OOM parameter in charge path") Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701130208510.69402@chino.kir.corp.google.com Signed-off-by: David Rientjes Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index a63a8f832664..b822e158b319 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4353,9 +4353,9 @@ static int mem_cgroup_do_precharge(unsigned long count) return ret; } - /* Try charges one by one with reclaim */ + /* Try charges one by one with reclaim, but do not retry */ while (count--) { - ret = try_charge(mc.to, GFP_KERNEL & ~__GFP_NORETRY, 1); + ret = try_charge(mc.to, GFP_KERNEL | __GFP_NORETRY, 1); if (ret) return ret; mc.precharge++; From bbd88e1d53a84df9f57a2e37acc15518c3d304db Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Tue, 24 Jan 2017 15:18:13 -0800 Subject: [PATCH 628/645] Documentation/filesystems/proc.txt: add VmPin Commit bc3e53f682d9 ("mm: distinguish between mlocked and pinned pages") added VmPin in /proc//status. Report that in Documentation/filesystems/proc.txt Also move Umask after Name to keep correct order. Link: http://lkml.kernel.org/r/20170114201219.30387-1-fabf@skynet.be Signed-off-by: Fabian Frederick Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 72624a16b792..c94b4675d021 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -212,10 +212,11 @@ asynchronous manner and the value may not be very precise. To see a precise snapshot of a moment, you can see /proc//smaps file and scan page table. It's slow but very precise. -Table 1-2: Contents of the status files (as of 4.1) +Table 1-2: Contents of the status files (as of 4.8) .............................................................................. Field Content Name filename of the executable + Umask file mode creation mask State state (R is running, S is sleeping, D is sleeping in an uninterruptible wait, Z is zombie, T is traced or stopped) @@ -226,7 +227,6 @@ Table 1-2: Contents of the status files (as of 4.1) TracerPid PID of process tracing this process (0 if not) Uid Real, effective, saved set, and file system UIDs Gid Real, effective, saved set, and file system GIDs - Umask file mode creation mask FDSize number of file descriptor slots currently allocated Groups supplementary group list NStgid descendant namespace thread group ID hierarchy @@ -236,6 +236,7 @@ Table 1-2: Contents of the status files (as of 4.1) VmPeak peak virtual memory size VmSize total program size VmLck locked memory size + VmPin pinned memory size VmHWM peak resident set size ("high water mark") VmRSS size of memory portions. It contains the three following parts (VmRSS = RssAnon + RssFile + RssShmem) From dd040b6f6d5630202e185399a2ff7ab356ed469c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 24 Jan 2017 15:18:16 -0800 Subject: [PATCH 629/645] radix-tree: fix private list warnings The newly introduced warning in radix_tree_free_nodes() was testing the wrong variable; it should have been 'old' instead of 'node'. Fixes: ea07b862ac8e ("mm: workingset: fix use-after-free in shadow node shrinker") Link: http://lkml.kernel.org/r/20170118163746.GA32495@cmpxchg.org Signed-off-by: Matthew Wilcox Signed-off-by: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/radix-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 0b92d605fb69..84812a9fb16f 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -769,7 +769,7 @@ static void radix_tree_free_nodes(struct radix_tree_node *node) struct radix_tree_node *old = child; offset = child->offset + 1; child = child->parent; - WARN_ON_ONCE(!list_empty(&node->private_list)); + WARN_ON_ONCE(!list_empty(&old->private_list)); radix_tree_node_free(old); if (old == entry_to_node(node)) return; From d51e9894d27492783fc6d1b489070b4ba66ce969 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Tue, 24 Jan 2017 15:18:18 -0800 Subject: [PATCH 630/645] mm/mempolicy.c: do not put mempolicy before using its nodemask Since commit be97a41b291e ("mm/mempolicy.c: merge alloc_hugepage_vma to alloc_pages_vma") alloc_pages_vma() can potentially free a mempolicy by mpol_cond_put() before accessing the embedded nodemask by __alloc_pages_nodemask(). The commit log says it's so "we can use a single exit path within the function" but that's clearly wrong. We can still do that when doing mpol_cond_put() after the allocation attempt. Make sure the mempolicy is not freed prematurely, otherwise __alloc_pages_nodemask() can end up using a bogus nodemask, which could lead e.g. to premature OOM. Fixes: be97a41b291e ("mm/mempolicy.c: merge alloc_hugepage_vma to alloc_pages_vma") Link: http://lkml.kernel.org/r/20170118141124.8345-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka Acked-by: Kirill A. Shutemov Acked-by: Michal Hocko Acked-by: David Rientjes Cc: Aneesh Kumar K.V Cc: Andrea Arcangeli Cc: [4.0+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 2e346645eb80..1e7873e40c9a 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2017,8 +2017,8 @@ retry_cpuset: nmask = policy_nodemask(gfp, pol); zl = policy_zonelist(gfp, pol, node); - mpol_cond_put(pol); page = __alloc_pages_nodemask(gfp, order, zl, nmask); + mpol_cond_put(pol); out: if (unlikely(!page && read_mems_allowed_retry(cpuset_mems_cookie))) goto retry_cpuset; From 545d58f677b21401f6de1ac12c25cc109f903ace Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 24 Jan 2017 15:18:21 -0800 Subject: [PATCH 631/645] frv: add atomic64_add_unless() The build of frv allmodconfig was failing with the error: lib/atomic64_test.c:209:9: error: implicit declaration of function 'atomic64_add_unless' All the atomic64 operations were defined in frv, but atomic64_add_unless() was not done. Implement atomic64_add_unless() as done in other arches. Link: http://lkml.kernel.org/r/1484781236-6698-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/include/asm/atomic.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h index 1c2a5e264fc7..994ed3d5ca08 100644 --- a/arch/frv/include/asm/atomic.h +++ b/arch/frv/include/asm/atomic.h @@ -161,6 +161,22 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) return c; } +static inline int atomic64_add_unless(atomic64_t *v, long long i, long long u) +{ + long long c, old; + + c = atomic64_read(v); + for (;;) { + if (unlikely(c == u)) + break; + old = atomic64_cmpxchg(v, c, c + i); + if (likely(old == c)) + break; + c = old; + } + return c != u; +} + #define ATOMIC_OP(op) \ static inline int atomic_fetch_##op(int i, atomic_t *v) \ { \ From 2dc705a9930b4806250fbf5a76e55266e59389f2 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 24 Jan 2017 15:18:24 -0800 Subject: [PATCH 632/645] fbdev: color map copying bounds checking Copying color maps to userspace doesn't check the value of to->start, which will cause kernel heap buffer OOB read due to signedness wraps. CVE-2016-8405 Link: http://lkml.kernel.org/r/20170105224249.GA50925@beast Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kees Cook Reported-by: Peter Pi (@heisecode) of Trend Micro Cc: Min Chong Cc: Dan Carpenter Cc: Tomi Valkeinen Cc: Bartlomiej Zolnierkiewicz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fbdev/core/fbcmap.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/video/fbdev/core/fbcmap.c b/drivers/video/fbdev/core/fbcmap.c index f89245b8ba8e..68a113594808 100644 --- a/drivers/video/fbdev/core/fbcmap.c +++ b/drivers/video/fbdev/core/fbcmap.c @@ -163,17 +163,18 @@ void fb_dealloc_cmap(struct fb_cmap *cmap) int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to) { - int tooff = 0, fromoff = 0; - int size; + unsigned int tooff = 0, fromoff = 0; + size_t size; if (to->start > from->start) fromoff = to->start - from->start; else tooff = from->start - to->start; - size = to->len - tooff; - if (size > (int) (from->len - fromoff)) - size = from->len - fromoff; - if (size <= 0) + if (fromoff >= from->len || tooff >= to->len) + return -EINVAL; + + size = min_t(size_t, to->len - tooff, from->len - fromoff); + if (size == 0) return -EINVAL; size *= sizeof(u16); @@ -187,17 +188,18 @@ int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to) int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to) { - int tooff = 0, fromoff = 0; - int size; + unsigned int tooff = 0, fromoff = 0; + size_t size; if (to->start > from->start) fromoff = to->start - from->start; else tooff = from->start - to->start; - size = to->len - tooff; - if (size > (int) (from->len - fromoff)) - size = from->len - fromoff; - if (size <= 0) + if (fromoff >= from->len || tooff >= to->len) + return -EINVAL; + + size = min_t(size_t, to->len - tooff, from->len - fromoff); + if (size == 0) return -EINVAL; size *= sizeof(u16); From ff7a28a074ccbea999dadbb58c46212cf90984c6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 24 Jan 2017 15:18:29 -0800 Subject: [PATCH 633/645] kernel/panic.c: add missing \n When a system panics, the "Rebooting in X seconds.." message is never printed because it lacks a new line. Fix it. Link: http://lkml.kernel.org/r/20170119114751.2724-1-jslaby@suse.cz Signed-off-by: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/panic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/panic.c b/kernel/panic.c index 901c4fb46002..08aa88dde7de 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -249,7 +249,7 @@ void panic(const char *fmt, ...) * Delay timeout seconds before rebooting the machine. * We can't use the "normal" timers since we just panicked. */ - pr_emerg("Rebooting in %d seconds..", panic_timeout); + pr_emerg("Rebooting in %d seconds..\n", panic_timeout); for (i = 0; i < panic_timeout * 1000; i += PANIC_TIMER_STEP) { touch_nmi_watchdog(); From ea57485af8f4221312a5a95d63c382b45e7840dc Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Tue, 24 Jan 2017 15:18:32 -0800 Subject: [PATCH 634/645] mm, page_alloc: fix check for NULL preferred_zone Patch series "fix premature OOM regression in 4.7+ due to cpuset races". This is v2 of my attempt to fix the recent report based on LTP cpuset stress test [1]. The intention is to go to stable 4.9 LTSS with this, as triggering repeated OOMs is not nice. That's why the patches try to be not too intrusive. Unfortunately why investigating I found that modifying the testcase to use per-VMA policies instead of per-task policies will bring the OOM's back, but that seems to be much older and harder to fix problem. I have posted a RFC [2] but I believe that fixing the recent regressions has a higher priority. Longer-term we might try to think how to fix the cpuset mess in a better and less error prone way. I was for example very surprised to learn, that cpuset updates change not only task->mems_allowed, but also nodemask of mempolicies. Until now I expected the parameter to alloc_pages_nodemask() to be stable. I wonder why do we then treat cpusets specially in get_page_from_freelist() and distinguish HARDWALL etc, when there's unconditional intersection between mempolicy and cpuset. I would expect the nodemask adjustment for saving overhead in g_p_f(), but that clearly doesn't happen in the current form. So we have both crazy complexity and overhead, AFAICS. [1] https://lkml.kernel.org/r/CAFpQJXUq-JuEP=QPidy4p_=FN0rkH5Z-kfB4qBvsf6jMS87Edg@mail.gmail.com [2] https://lkml.kernel.org/r/7c459f26-13a6-a817-e508-b65b903a8378@suse.cz This patch (of 4): Since commit c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone in a zonelist twice") we have a wrong check for NULL preferred_zone, which can theoretically happen due to concurrent cpuset modification. We check the zoneref pointer which is never NULL and we should check the zone pointer. Also document this in first_zones_zonelist() comment per Michal Hocko. Fixes: c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone in a zonelist twice") Link: http://lkml.kernel.org/r/20170120103843.24587-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka Acked-by: Mel Gorman Acked-by: Hillf Danton Cc: Ganapatrao Kulkarni Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 6 +++++- mm/page_alloc.c | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 36d9896fbc1e..f4aac87adcc3 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -972,12 +972,16 @@ static __always_inline struct zoneref *next_zones_zonelist(struct zoneref *z, * @zonelist - The zonelist to search for a suitable zone * @highest_zoneidx - The zone index of the highest zone to return * @nodes - An optional nodemask to filter the zonelist with - * @zone - The first suitable zone found is returned via this parameter + * @return - Zoneref pointer for the first suitable zone found (see below) * * This function returns the first zone at or below a given zone index that is * within the allowed nodemask. The zoneref returned is a cursor that can be * used to iterate the zonelist with next_zones_zonelist by advancing it by * one before calling. + * + * When no eligible zone is found, zoneref->zone is NULL (zoneref itself is + * never NULL). This may happen either genuinely, or due to concurrent nodemask + * update due to cpuset modification. */ static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist, enum zone_type highest_zoneidx, diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 41d5e2e2d8ce..85cf0f715eb0 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3784,7 +3784,7 @@ retry_cpuset: */ ac.preferred_zoneref = first_zones_zonelist(ac.zonelist, ac.high_zoneidx, ac.nodemask); - if (!ac.preferred_zoneref) { + if (!ac.preferred_zoneref->zone) { page = NULL; goto no_zone; } From 16096c25bf0ca5d87e4fa6ec6108ba53feead212 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Tue, 24 Jan 2017 15:18:35 -0800 Subject: [PATCH 635/645] mm, page_alloc: fix fast-path race with cpuset update or removal Ganapatrao Kulkarni reported that the LTP test cpuset01 in stress mode triggers OOM killer in few seconds, despite lots of free memory. The test attempts to repeatedly fault in memory in one process in a cpuset, while changing allowed nodes of the cpuset between 0 and 1 in another process. One possible cause is that in the fast path we find the preferred zoneref according to current mems_allowed, so that it points to the middle of the zonelist, skipping e.g. zones of node 1 completely. If the mems_allowed is updated to contain only node 1, we never reach it in the zonelist, and trigger OOM before checking the cpuset_mems_cookie. This patch fixes the particular case by redoing the preferred zoneref search if we switch back to the original nodemask. The condition is also slightly changed so that when the last non-root cpuset is removed, we don't miss it. Note that this is not a full fix, and more patches will follow. Link: http://lkml.kernel.org/r/20170120103843.24587-3-vbabka@suse.cz Fixes: 682a3385e773 ("mm, page_alloc: inline the fast path of the zonelist iterator") Signed-off-by: Vlastimil Babka Reported-by: Ganapatrao Kulkarni Acked-by: Michal Hocko Acked-by: Mel Gorman Acked-by: Hillf Danton Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 85cf0f715eb0..6f28b7e926d1 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3804,9 +3804,17 @@ retry_cpuset: /* * Restore the original nodemask if it was potentially replaced with * &cpuset_current_mems_allowed to optimize the fast-path attempt. + * Also recalculate the starting point for the zonelist iterator or + * we could end up iterating over non-eligible zones endlessly. */ - if (cpusets_enabled()) + if (unlikely(ac.nodemask != nodemask)) { ac.nodemask = nodemask; + ac.preferred_zoneref = first_zones_zonelist(ac.zonelist, + ac.high_zoneidx, ac.nodemask); + if (!ac.preferred_zoneref->zone) + goto no_zone; + } + page = __alloc_pages_slowpath(alloc_mask, order, &ac); no_zone: From 5ce9bfef1d27944c119a397a9d827bef795487ce Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Tue, 24 Jan 2017 15:18:38 -0800 Subject: [PATCH 636/645] mm, page_alloc: move cpuset seqcount checking to slowpath This is a preparation for the following patch to make review simpler. While the primary motivation is a bug fix, this also simplifies the fast path, although the moved code is only enabled when cpusets are in use. Link: http://lkml.kernel.org/r/20170120103843.24587-4-vbabka@suse.cz Signed-off-by: Vlastimil Babka Acked-by: Mel Gorman Acked-by: Hillf Danton Cc: Ganapatrao Kulkarni Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 47 ++++++++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 21 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 6f28b7e926d1..0df3c089d3af 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3523,12 +3523,13 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, struct page *page = NULL; unsigned int alloc_flags; unsigned long did_some_progress; - enum compact_priority compact_priority = DEF_COMPACT_PRIORITY; + enum compact_priority compact_priority; enum compact_result compact_result; - int compaction_retries = 0; - int no_progress_loops = 0; + int compaction_retries; + int no_progress_loops; unsigned long alloc_start = jiffies; unsigned int stall_timeout = 10 * HZ; + unsigned int cpuset_mems_cookie; /* * In the slowpath, we sanity check order to avoid ever trying to @@ -3549,6 +3550,12 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, (__GFP_ATOMIC|__GFP_DIRECT_RECLAIM))) gfp_mask &= ~__GFP_ATOMIC; +retry_cpuset: + compaction_retries = 0; + no_progress_loops = 0; + compact_priority = DEF_COMPACT_PRIORITY; + cpuset_mems_cookie = read_mems_allowed_begin(); + /* * The fast path uses conservative alloc_flags to succeed only until * kswapd needs to be woken up, and to avoid the cost of setting up @@ -3720,6 +3727,15 @@ retry: } nopage: + /* + * When updating a task's mems_allowed, it is possible to race with + * parallel threads in such a way that an allocation can fail while + * the mask is being updated. If a page allocation is about to fail, + * check if the cpuset changed during allocation and if so, retry. + */ + if (read_mems_allowed_retry(cpuset_mems_cookie)) + goto retry_cpuset; + warn_alloc(gfp_mask, "page allocation failure: order:%u", order); got_pg: @@ -3734,7 +3750,6 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist, nodemask_t *nodemask) { struct page *page; - unsigned int cpuset_mems_cookie; unsigned int alloc_flags = ALLOC_WMARK_LOW; gfp_t alloc_mask = gfp_mask; /* The gfp_t that was actually used for allocation */ struct alloc_context ac = { @@ -3771,9 +3786,6 @@ __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, if (IS_ENABLED(CONFIG_CMA) && ac.migratetype == MIGRATE_MOVABLE) alloc_flags |= ALLOC_CMA; -retry_cpuset: - cpuset_mems_cookie = read_mems_allowed_begin(); - /* Dirty zone balancing only done in the fast path */ ac.spread_dirty_pages = (gfp_mask & __GFP_WRITE); @@ -3786,6 +3798,11 @@ retry_cpuset: ac.high_zoneidx, ac.nodemask); if (!ac.preferred_zoneref->zone) { page = NULL; + /* + * This might be due to race with cpuset_current_mems_allowed + * update, so make sure we retry with original nodemask in the + * slow path. + */ goto no_zone; } @@ -3794,6 +3811,7 @@ retry_cpuset: if (likely(page)) goto out; +no_zone: /* * Runtime PM, block IO and its error handling path can deadlock * because I/O on the device might not complete. @@ -3811,24 +3829,11 @@ retry_cpuset: ac.nodemask = nodemask; ac.preferred_zoneref = first_zones_zonelist(ac.zonelist, ac.high_zoneidx, ac.nodemask); - if (!ac.preferred_zoneref->zone) - goto no_zone; + /* If we have NULL preferred zone, slowpath wll handle that */ } page = __alloc_pages_slowpath(alloc_mask, order, &ac); -no_zone: - /* - * When updating a task's mems_allowed, it is possible to race with - * parallel threads in such a way that an allocation can fail while - * the mask is being updated. If a page allocation is about to fail, - * check if the cpuset changed during allocation and if so, retry. - */ - if (unlikely(!page && read_mems_allowed_retry(cpuset_mems_cookie))) { - alloc_mask = gfp_mask; - goto retry_cpuset; - } - out: if (memcg_kmem_enabled() && (gfp_mask & __GFP_ACCOUNT) && page && unlikely(memcg_kmem_charge(page, gfp_mask, order) != 0)) { From e47483bca2cc59a4593b37a270b16ee42b1d9f08 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Tue, 24 Jan 2017 15:18:41 -0800 Subject: [PATCH 637/645] mm, page_alloc: fix premature OOM when racing with cpuset mems update Ganapatrao Kulkarni reported that the LTP test cpuset01 in stress mode triggers OOM killer in few seconds, despite lots of free memory. The test attempts to repeatedly fault in memory in one process in a cpuset, while changing allowed nodes of the cpuset between 0 and 1 in another process. The problem comes from insufficient protection against cpuset changes, which can cause get_page_from_freelist() to consider all zones as non-eligible due to nodemask and/or current->mems_allowed. This was masked in the past by sufficient retries, but since commit 682a3385e773 ("mm, page_alloc: inline the fast path of the zonelist iterator") we fix the preferred_zoneref once, and don't iterate over the whole zonelist in further attempts, thus the only eligible zones might be placed in the zonelist before our starting point and we always miss them. A previous patch fixed this problem for current->mems_allowed. However, cpuset changes also update the task's mempolicy nodemask. The fix has two parts. We have to repeat the preferred_zoneref search when we detect cpuset update by way of seqcount, and we have to check the seqcount before considering OOM. [akpm@linux-foundation.org: fix typo in comment] Link: http://lkml.kernel.org/r/20170120103843.24587-5-vbabka@suse.cz Fixes: c33d6c06f60f ("mm, page_alloc: avoid looking up the first zone in a zonelist twice") Signed-off-by: Vlastimil Babka Reported-by: Ganapatrao Kulkarni Acked-by: Mel Gorman Acked-by: Hillf Danton Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 35 ++++++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 11 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 0df3c089d3af..f3e0c69a97b7 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3555,6 +3555,17 @@ retry_cpuset: no_progress_loops = 0; compact_priority = DEF_COMPACT_PRIORITY; cpuset_mems_cookie = read_mems_allowed_begin(); + /* + * We need to recalculate the starting point for the zonelist iterator + * because we might have used different nodemask in the fast path, or + * there was a cpuset modification and we are retrying - otherwise we + * could end up iterating over non-eligible zones endlessly. + */ + ac->preferred_zoneref = first_zones_zonelist(ac->zonelist, + ac->high_zoneidx, ac->nodemask); + if (!ac->preferred_zoneref->zone) + goto nopage; + /* * The fast path uses conservative alloc_flags to succeed only until @@ -3715,6 +3726,13 @@ retry: &compaction_retries)) goto retry; + /* + * It's possible we raced with cpuset update so the OOM would be + * premature (see below the nopage: label for full explanation). + */ + if (read_mems_allowed_retry(cpuset_mems_cookie)) + goto retry_cpuset; + /* Reclaim has failed us, start killing things */ page = __alloc_pages_may_oom(gfp_mask, order, ac, &did_some_progress); if (page) @@ -3728,10 +3746,11 @@ retry: nopage: /* - * When updating a task's mems_allowed, it is possible to race with - * parallel threads in such a way that an allocation can fail while - * the mask is being updated. If a page allocation is about to fail, - * check if the cpuset changed during allocation and if so, retry. + * When updating a task's mems_allowed or mempolicy nodemask, it is + * possible to race with parallel threads in such a way that our + * allocation can fail while the mask is being updated. If we are about + * to fail, check if the cpuset changed during allocation and if so, + * retry. */ if (read_mems_allowed_retry(cpuset_mems_cookie)) goto retry_cpuset; @@ -3822,15 +3841,9 @@ no_zone: /* * Restore the original nodemask if it was potentially replaced with * &cpuset_current_mems_allowed to optimize the fast-path attempt. - * Also recalculate the starting point for the zonelist iterator or - * we could end up iterating over non-eligible zones endlessly. */ - if (unlikely(ac.nodemask != nodemask)) { + if (unlikely(ac.nodemask != nodemask)) ac.nodemask = nodemask; - ac.preferred_zoneref = first_zones_zonelist(ac.zonelist, - ac.high_zoneidx, ac.nodemask); - /* If we have NULL preferred zone, slowpath wll handle that */ - } page = __alloc_pages_slowpath(alloc_mask, order, &ac); From 4180c4c170a5a33b9987b314d248a9d572d89ab0 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Tue, 24 Jan 2017 15:18:43 -0800 Subject: [PATCH 638/645] frv: add missing atomic64 operations Some more atomic64 operations were missing and as a result frv allmodconfig was failing. Add the missing operations. Link: http://lkml.kernel.org/r/1485193844-12850-1-git-send-email-sudip.mukherjee@codethink.co.uk Signed-off-by: Sudip Mukherjee Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/include/asm/atomic.h | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h index 994ed3d5ca08..e93c9494503a 100644 --- a/arch/frv/include/asm/atomic.h +++ b/arch/frv/include/asm/atomic.h @@ -139,7 +139,7 @@ static inline void atomic64_dec(atomic64_t *v) #define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) #define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) #define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0) - +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) #define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new)) #define atomic_xchg(v, new) (xchg(&(v)->counter, new)) @@ -177,6 +177,23 @@ static inline int atomic64_add_unless(atomic64_t *v, long long i, long long u) return c != u; } +static inline long long atomic64_dec_if_positive(atomic64_t *v) +{ + long long c, old, dec; + + c = atomic64_read(v); + for (;;) { + dec = c - 1; + if (unlikely(dec < 0)) + break; + old = atomic64_cmpxchg((v), c, dec); + if (likely(old == c)) + break; + c = old; + } + return dec; +} + #define ATOMIC_OP(op) \ static inline int atomic_fetch_##op(int i, atomic_t *v) \ { \ From f598f82e204ec0b17797caaf1b0311c52d43fb9a Mon Sep 17 00:00:00 2001 From: Coly Li Date: Tue, 24 Jan 2017 15:18:46 -0800 Subject: [PATCH 639/645] romfs: use different way to generate fsid for BLOCK or MTD Commit 8a59f5d25265 ("fs/romfs: return f_fsid for statfs(2)") generates a 64bit id from sb->s_bdev->bd_dev. This is only correct when romfs is defined with CONFIG_ROMFS_ON_BLOCK. If romfs is only defined with CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev will triger an oops. Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y, both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined. Therefore when calling huge_encode_dev() to generate a 64bit id, I use the follow order to choose parameter, - CONFIG_ROMFS_ON_BLOCK defined use sb->s_bdev->bd_dev - CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined use sb->s_dev when, - both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined leave id as 0 When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index, otherwise sb->s_dev is 0. This is a try-best effort to generate a uniq file system ID, if all the above conditions are not meet, f_fsid of this romfs instance will be 0. Generally only one romfs can be built on single MTD block device, this method is enough to identify multiple romfs instances in a computer. Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.de Signed-off-by: Coly Li Reported-by: Nong Li Tested-by: Nong Li Cc: Richard Weinberger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/romfs/super.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/fs/romfs/super.c b/fs/romfs/super.c index d0f8a38dfafa..0186fe6d39f3 100644 --- a/fs/romfs/super.c +++ b/fs/romfs/super.c @@ -74,6 +74,7 @@ #include #include #include +#include #include "internal.h" static struct kmem_cache *romfs_inode_cachep; @@ -416,7 +417,22 @@ static void romfs_destroy_inode(struct inode *inode) static int romfs_statfs(struct dentry *dentry, struct kstatfs *buf) { struct super_block *sb = dentry->d_sb; - u64 id = huge_encode_dev(sb->s_bdev->bd_dev); + u64 id = 0; + + /* When calling huge_encode_dev(), + * use sb->s_bdev->bd_dev when, + * - CONFIG_ROMFS_ON_BLOCK defined + * use sb->s_dev when, + * - CONFIG_ROMFS_ON_BLOCK undefined and + * - CONFIG_ROMFS_ON_MTD defined + * leave id as 0 when, + * - CONFIG_ROMFS_ON_BLOCK undefined and + * - CONFIG_ROMFS_ON_MTD undefined + */ + if (sb->s_bdev) + id = huge_encode_dev(sb->s_bdev->bd_dev); + else if (sb->s_dev) + id = huge_encode_dev(sb->s_dev); buf->f_type = ROMFS_MAGIC; buf->f_namelen = ROMFS_MAXFN; @@ -489,6 +505,11 @@ static int romfs_fill_super(struct super_block *sb, void *data, int silent) sb->s_flags |= MS_RDONLY | MS_NOATIME; sb->s_op = &romfs_super_ops; +#ifdef CONFIG_ROMFS_ON_MTD + /* Use same dev ID from the underlying mtdblock device */ + if (sb->s_mtd) + sb->s_dev = MKDEV(MTD_BLOCK_MAJOR, sb->s_mtd->index); +#endif /* read the image superblock and check it */ rsb = kmalloc(512, GFP_KERNEL); if (!rsb) From 3705ccfdd1e8b539225ce20e3925a945cc788d67 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 24 Jan 2017 15:18:49 -0800 Subject: [PATCH 640/645] mn10300: fix build error of missing fpu_save() When CONFIG_FPU is not enabled on arch/mn10300, causes a build error with a call to fpu_save(): kernel/built-in.o: In function `.L410': core.c:(.sched.text+0x28a): undefined reference to `fpu_save' Fix this by including in so that an empty static inline fpu_save() is defined. Link: http://lkml.kernel.org/r/dc421c4f-4842-4429-1b99-92865c2f24b6@infradead.org Signed-off-by: Randy Dunlap Reported-by: kbuild test robot Reviewed-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/include/asm/switch_to.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mn10300/include/asm/switch_to.h b/arch/mn10300/include/asm/switch_to.h index 393d311735c8..67e333aa7629 100644 --- a/arch/mn10300/include/asm/switch_to.h +++ b/arch/mn10300/include/asm/switch_to.h @@ -16,7 +16,7 @@ struct task_struct; struct thread_struct; -#if !defined(CONFIG_LAZY_SAVE_FPU) +#if defined(CONFIG_FPU) && !defined(CONFIG_LAZY_SAVE_FPU) struct fpu_state_struct; extern asmlinkage void fpu_save(struct fpu_state_struct *); #define switch_fpu(prev, next) \ From 3277953de2f31dd03c6375e9a9f680ac37fc9d27 Mon Sep 17 00:00:00 2001 From: zhong jiang Date: Tue, 24 Jan 2017 15:18:52 -0800 Subject: [PATCH 641/645] mm: do not export ioremap_page_range symbol for external module Recently, I've found cases in which ioremap_page_range was used incorrectly, in external modules, leading to crashes. This can be partly attributed to the fact that ioremap_page_range is lower-level, with fewer protections, as compared to the other functions that an external module would typically call. Those include: ioremap_cache ioremap_nocache ioremap_prot ioremap_uc ioremap_wc ioremap_wt ...each of which wraps __ioremap_caller, which in turn provides a safer way to achieve the mapping. Therefore, stop EXPORT-ing ioremap_page_range. Link: http://lkml.kernel.org/r/1485173220-29010-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang Reviewed-by: John Hubbard Suggested-by: John Hubbard Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/ioremap.c | 1 - 1 file changed, 1 deletion(-) diff --git a/lib/ioremap.c b/lib/ioremap.c index 86c8911b0e3a..a3e14ce92a56 100644 --- a/lib/ioremap.c +++ b/lib/ioremap.c @@ -144,4 +144,3 @@ int ioremap_page_range(unsigned long addr, return err; } -EXPORT_SYMBOL_GPL(ioremap_page_range); From 534c9dc982aca01b630297ad5637f6e95e94c1e2 Mon Sep 17 00:00:00 2001 From: Dan Streetman Date: Tue, 24 Jan 2017 15:18:55 -0800 Subject: [PATCH 642/645] MAINTAINERS: add Dan Streetman to zswap maintainers Add myself as zswap maintainer. Link: http://lkml.kernel.org/r/20170124212200.19052-1-ddstreet@ieee.org Signed-off-by: Dan Streetman Acked-by: Seth Jennings Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2fd11b439ab3..c79b519fb422 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13679,6 +13679,7 @@ F: Documentation/vm/zsmalloc.txt ZSWAP COMPRESSED SWAP CACHING M: Seth Jennings +M: Dan Streetman L: linux-mm@kvack.org S: Maintained F: mm/zswap.c From aab45453ff5c77200c6da4ac909f7a4392aed17e Mon Sep 17 00:00:00 2001 From: Dan Streetman Date: Tue, 24 Jan 2017 15:18:57 -0800 Subject: [PATCH 643/645] MAINTAINERS: add Dan Streetman to zbud maintainers Add myself as zbud maintainer. Link: http://lkml.kernel.org/r/20170124221705.26523-1-ddstreet@ieee.org Signed-off-by: Dan Streetman Cc: Seth Jennings Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index c79b519fb422..bbf74a9d6b47 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13624,6 +13624,7 @@ F: drivers/net/hamradio/z8530.h ZBUD COMPRESSED PAGE ALLOCATOR M: Seth Jennings +M: Dan Streetman L: linux-mm@kvack.org S: Maintained F: mm/zbud.c From 54a07c7bb0da0343734c78212bbe9f3735394962 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 26 Jan 2017 06:44:03 +1000 Subject: [PATCH 644/645] Revert "drm/probe-helpers: Drop locking from poll_enable" This reverts commit 3846fd9b86001bea171943cc3bb9222cb6da6b42. There were some precursor commits missing for this around connector locking, we should probably merge Lyude's nouveau avoid the problem patch. --- drivers/gpu/drm/drm_probe_helper.c | 51 +++++++++++++++++----------- drivers/gpu/drm/i915/intel_hotplug.c | 4 +-- include/drm/drm_crtc_helper.h | 1 + 3 files changed, 34 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index b452a7ccd84b..cf8f0128c161 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -115,27 +115,24 @@ static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector) #define DRM_OUTPUT_POLL_PERIOD (10*HZ) /** - * drm_kms_helper_poll_enable - re-enable output polling. + * drm_kms_helper_poll_enable_locked - re-enable output polling. * @dev: drm_device * - * This function re-enables the output polling work, after it has been - * temporarily disabled using drm_kms_helper_poll_disable(), for example over - * suspend/resume. + * This function re-enables the output polling work without + * locking the mode_config mutex. * - * Drivers can call this helper from their device resume implementation. It is - * an error to call this when the output polling support has not yet been set - * up. - * - * Note that calls to enable and disable polling must be strictly ordered, which - * is automatically the case when they're only call from suspend/resume - * callbacks. + * This is like drm_kms_helper_poll_enable() however it is to be + * called from a context where the mode_config mutex is locked + * already. */ -void drm_kms_helper_poll_enable(struct drm_device *dev) +void drm_kms_helper_poll_enable_locked(struct drm_device *dev) { bool poll = false; struct drm_connector *connector; unsigned long delay = DRM_OUTPUT_POLL_PERIOD; + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll) return; @@ -163,7 +160,7 @@ void drm_kms_helper_poll_enable(struct drm_device *dev) if (poll) schedule_delayed_work(&dev->mode_config.output_poll_work, delay); } -EXPORT_SYMBOL(drm_kms_helper_poll_enable); +EXPORT_SYMBOL(drm_kms_helper_poll_enable_locked); static enum drm_connector_status drm_connector_detect(struct drm_connector *connector, bool force) @@ -290,7 +287,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, /* Re-enable polling in case the global poll config changed. */ if (drm_kms_helper_poll != dev->mode_config.poll_running) - drm_kms_helper_poll_enable(dev); + drm_kms_helper_poll_enable_locked(dev); dev->mode_config.poll_running = drm_kms_helper_poll; @@ -482,12 +479,8 @@ out: * This function disables the output polling work. * * Drivers can call this helper from their device suspend implementation. It is - * not an error to call this even when output polling isn't enabled or already - * disabled. Polling is re-enabled by calling drm_kms_helper_poll_enable(). - * - * Note that calls to enable and disable polling must be strictly ordered, which - * is automatically the case when they're only call from suspend/resume - * callbacks. + * not an error to call this even when output polling isn't enabled or arlready + * disabled. */ void drm_kms_helper_poll_disable(struct drm_device *dev) { @@ -497,6 +490,24 @@ void drm_kms_helper_poll_disable(struct drm_device *dev) } EXPORT_SYMBOL(drm_kms_helper_poll_disable); +/** + * drm_kms_helper_poll_enable - re-enable output polling. + * @dev: drm_device + * + * This function re-enables the output polling work. + * + * Drivers can call this helper from their device resume implementation. It is + * an error to call this when the output polling support has not yet been set + * up. + */ +void drm_kms_helper_poll_enable(struct drm_device *dev) +{ + mutex_lock(&dev->mode_config.mutex); + drm_kms_helper_poll_enable_locked(dev); + mutex_unlock(&dev->mode_config.mutex); +} +EXPORT_SYMBOL(drm_kms_helper_poll_enable); + /** * drm_kms_helper_poll_init - initialize and enable output polling * @dev: drm_device diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c index b62e3f8ad415..3d546c019de0 100644 --- a/drivers/gpu/drm/i915/intel_hotplug.c +++ b/drivers/gpu/drm/i915/intel_hotplug.c @@ -180,7 +180,7 @@ static void intel_hpd_irq_storm_disable(struct drm_i915_private *dev_priv) /* Enable polling and queue hotplug re-enabling. */ if (hpd_disabled) { - drm_kms_helper_poll_enable(dev); + drm_kms_helper_poll_enable_locked(dev); mod_delayed_work(system_wq, &dev_priv->hotplug.reenable_work, msecs_to_jiffies(HPD_STORM_REENABLE_DELAY)); } @@ -511,7 +511,7 @@ static void i915_hpd_poll_init_work(struct work_struct *work) } if (enabled) - drm_kms_helper_poll_enable(dev); + drm_kms_helper_poll_enable_locked(dev); mutex_unlock(&dev->mode_config.mutex); diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index d026f5017c33..982c299e435a 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -73,5 +73,6 @@ extern void drm_kms_helper_hotplug_event(struct drm_device *dev); extern void drm_kms_helper_poll_disable(struct drm_device *dev); extern void drm_kms_helper_poll_enable(struct drm_device *dev); +extern void drm_kms_helper_poll_enable_locked(struct drm_device *dev); #endif From ff9f8a7cf935468a94d9927c68b00daae701667e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 25 Jan 2017 18:20:55 -0800 Subject: [PATCH 645/645] sysctl: fix proc_doulongvec_ms_jiffies_minmax() We perform the conversion between kernel jiffies and ms only when exporting kernel value to user space. We need to do the opposite operation when value is written by user. Only matters when HZ != 1000 Signed-off-by: Eric Dumazet Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- kernel/sysctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 8dbaec0e4f7f..1aea594a54db 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -2475,6 +2475,7 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int break; if (neg) continue; + val = convmul * val / convdiv; if ((min && val < *min) || (max && val > *max)) continue; *i = val;