mfd: omap-usb: prepare/unprepare clock while enable/disable

This should fix the following warning at boot on OMAP5 uEVM
[    8.783155] WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x94/0xa4()

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Roger Quadros 2013-10-15 15:30:34 +03:00 коммит произвёл Lee Jones
Родитель 2a048d3b78
Коммит b0e5992612
2 изменённых файлов: 10 добавлений и 10 удалений

Просмотреть файл

@ -328,13 +328,13 @@ static int usbhs_runtime_resume(struct device *dev)
omap_tll_enable(pdata);
if (!IS_ERR(omap->ehci_logic_fck))
clk_enable(omap->ehci_logic_fck);
clk_prepare_enable(omap->ehci_logic_fck);
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
if (!IS_ERR(omap->hsic60m_clk[i])) {
r = clk_enable(omap->hsic60m_clk[i]);
r = clk_prepare_enable(omap->hsic60m_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d hsic60m clk:%d\n",
@ -343,7 +343,7 @@ static int usbhs_runtime_resume(struct device *dev)
}
if (!IS_ERR(omap->hsic480m_clk[i])) {
r = clk_enable(omap->hsic480m_clk[i]);
r = clk_prepare_enable(omap->hsic480m_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d hsic480m clk:%d\n",
@ -354,7 +354,7 @@ static int usbhs_runtime_resume(struct device *dev)
case OMAP_EHCI_PORT_MODE_TLL:
if (!IS_ERR(omap->utmi_clk[i])) {
r = clk_enable(omap->utmi_clk[i]);
r = clk_prepare_enable(omap->utmi_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d clk : %d\n",
@ -382,15 +382,15 @@ static int usbhs_runtime_suspend(struct device *dev)
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_disable(omap->hsic60m_clk[i]);
clk_disable_unprepare(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_disable(omap->hsic480m_clk[i]);
clk_disable_unprepare(omap->hsic480m_clk[i]);
/* Fall through as utmi_clks were used in HSIC mode */
case OMAP_EHCI_PORT_MODE_TLL:
if (!IS_ERR(omap->utmi_clk[i]))
clk_disable(omap->utmi_clk[i]);
clk_disable_unprepare(omap->utmi_clk[i]);
break;
default:
break;
@ -398,7 +398,7 @@ static int usbhs_runtime_suspend(struct device *dev)
}
if (!IS_ERR(omap->ehci_logic_fck))
clk_disable(omap->ehci_logic_fck);
clk_disable_unprepare(omap->ehci_logic_fck);
omap_tll_disable(pdata);

Просмотреть файл

@ -429,7 +429,7 @@ int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
if (IS_ERR(tll->ch_clk[i]))
continue;
r = clk_enable(tll->ch_clk[i]);
r = clk_prepare_enable(tll->ch_clk[i]);
if (r) {
dev_err(tll_dev,
"Error enabling ch %d clock: %d\n", i, r);
@ -460,7 +460,7 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
for (i = 0; i < tll->nch; i++) {
if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
if (!IS_ERR(tll->ch_clk[i]))
clk_disable(tll->ch_clk[i]);
clk_disable_unprepare(tll->ch_clk[i]);
}
}