[PATCH] ppc32: Add 440SPe support
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root port mode. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Roland Dreier
Linus Torvalds
Родитель
41aace4fe8
Коммит
b0f7b8bc57
|
|
@ -929,6 +929,16 @@ struct cpu_spec cpu_specs[] = {
|
|||
.icache_bsize = 32,
|
||||
.dcache_bsize = 32,
|
||||
},
|
||||
{ /* 440SPe Rev. A */
|
||||
.pvr_mask = 0xff000fff,
|
||||
.pvr_value = 0x53000890,
|
||||
.cpu_name = "440SPe Rev. A",
|
||||
.cpu_features = CPU_FTR_SPLIT_ID_CACHE |
|
||||
CPU_FTR_USE_TB,
|
||||
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
|
||||
.icache_bsize = 32,
|
||||
.dcache_bsize = 32,
|
||||
},
|
||||
#endif /* CONFIG_44x */
|
||||
#ifdef CONFIG_FSL_BOOKE
|
||||
{ /* e200z5 */
|
||||
|
|
|
|||
|
|
@ -124,9 +124,13 @@ config 440SP
|
|||
depends on LUAN
|
||||
default y
|
||||
|
||||
config 440SPE
|
||||
bool
|
||||
default n
|
||||
|
||||
config 440
|
||||
bool
|
||||
depends on 440GP || 440SP || 440EP
|
||||
depends on 440GP || 440SP || 440SPE || 440EP
|
||||
default y
|
||||
|
||||
config 440A
|
||||
|
|
@ -168,7 +172,7 @@ config XILINX_OCP
|
|||
|
||||
config IBM_EMAC4
|
||||
bool
|
||||
depends on 440GX || 440SP
|
||||
depends on 440GX || 440SP || 440SPE
|
||||
default y
|
||||
|
||||
config BIOS_FIXUP
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ obj-$(CONFIG_440EP) += ibm440ep.o
|
|||
obj-$(CONFIG_440GP) += ibm440gp.o
|
||||
obj-$(CONFIG_440GX) += ibm440gx.o
|
||||
obj-$(CONFIG_440SP) += ibm440sp.o
|
||||
obj-$(CONFIG_440SPE) += ppc440spe.o
|
||||
obj-$(CONFIG_405EP) += ibm405ep.o
|
||||
obj-$(CONFIG_405GPR) += ibm405gpr.o
|
||||
obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,148 @@
|
|||
/*
|
||||
* arch/ppc/platforms/4xx/ppc440spe.c
|
||||
*
|
||||
* PPC440SPe I/O descriptions
|
||||
*
|
||||
* Roland Dreier <rolandd@cisco.com>
|
||||
* Copyright (c) 2005 Cisco Systems. All rights reserved.
|
||||
*
|
||||
* Matt Porter <mporter@kernel.crashing.org>
|
||||
* Copyright 2002-2005 MontaVista Software Inc.
|
||||
*
|
||||
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
||||
* Copyright (c) 2003, 2004 Zultys Technologies
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <platforms/4xx/ppc440spe.h>
|
||||
#include <asm/ocp.h>
|
||||
#include <asm/ppc4xx_pic.h>
|
||||
|
||||
static struct ocp_func_emac_data ppc440spe_emac0_def = {
|
||||
.rgmii_idx = -1, /* No RGMII */
|
||||
.rgmii_mux = -1, /* No RGMII */
|
||||
.zmii_idx = -1, /* No ZMII */
|
||||
.zmii_mux = -1, /* No ZMII */
|
||||
.mal_idx = 0, /* MAL device index */
|
||||
.mal_rx_chan = 0, /* MAL rx channel number */
|
||||
.mal_tx_chan = 0, /* MAL tx channel number */
|
||||
.wol_irq = 61, /* WOL interrupt number */
|
||||
.mdio_idx = -1, /* No shared MDIO */
|
||||
.tah_idx = -1, /* No TAH */
|
||||
};
|
||||
OCP_SYSFS_EMAC_DATA()
|
||||
|
||||
static struct ocp_func_mal_data ppc440spe_mal0_def = {
|
||||
.num_tx_chans = 1, /* Number of TX channels */
|
||||
.num_rx_chans = 1, /* Number of RX channels */
|
||||
.txeob_irq = 38, /* TX End Of Buffer IRQ */
|
||||
.rxeob_irq = 39, /* RX End Of Buffer IRQ */
|
||||
.txde_irq = 34, /* TX Descriptor Error IRQ */
|
||||
.rxde_irq = 35, /* RX Descriptor Error IRQ */
|
||||
.serr_irq = 33, /* MAL System Error IRQ */
|
||||
.dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
|
||||
};
|
||||
OCP_SYSFS_MAL_DATA()
|
||||
|
||||
static struct ocp_func_iic_data ppc440spe_iic0_def = {
|
||||
.fast_mode = 0, /* Use standad mode (100Khz) */
|
||||
};
|
||||
|
||||
static struct ocp_func_iic_data ppc440spe_iic1_def = {
|
||||
.fast_mode = 0, /* Use standad mode (100Khz) */
|
||||
};
|
||||
OCP_SYSFS_IIC_DATA()
|
||||
|
||||
struct ocp_def core_ocp[] = {
|
||||
{ .vendor = OCP_VENDOR_IBM,
|
||||
.function = OCP_FUNC_16550,
|
||||
.index = 0,
|
||||
.paddr = PPC440SPE_UART0_ADDR,
|
||||
.irq = UART0_INT,
|
||||
.pm = IBM_CPM_UART0,
|
||||
},
|
||||
{ .vendor = OCP_VENDOR_IBM,
|
||||
.function = OCP_FUNC_16550,
|
||||
.index = 1,
|
||||
.paddr = PPC440SPE_UART1_ADDR,
|
||||
.irq = UART1_INT,
|
||||
.pm = IBM_CPM_UART1,
|
||||
},
|
||||
{ .vendor = OCP_VENDOR_IBM,
|
||||
.function = OCP_FUNC_16550,
|
||||
.index = 2,
|
||||
.paddr = PPC440SPE_UART2_ADDR,
|
||||
.irq = UART2_INT,
|
||||
.pm = IBM_CPM_UART2,
|
||||
},
|
||||
{ .vendor = OCP_VENDOR_IBM,
|
||||
.function = OCP_FUNC_IIC,
|
||||
.index = 0,
|
||||
.paddr = 0x00000004f0000400ULL,
|
||||
.irq = 2,
|
||||
.pm = IBM_CPM_IIC0,
|
||||
.additions = &ppc440spe_iic0_def,
|
||||
.show = &ocp_show_iic_data
|
||||
},
|
||||
{ .vendor = OCP_VENDOR_IBM,
|
||||
.function = OCP_FUNC_IIC,
|
||||
.index = 1,
|
||||
.paddr = 0x00000004f0000500ULL,
|
||||
.irq = 3,
|
||||
.pm = IBM_CPM_IIC1,
|
||||
.additions = &ppc440spe_iic1_def,
|
||||
.show = &ocp_show_iic_data
|
||||
},
|
||||
{ .vendor = OCP_VENDOR_IBM,
|
||||
.function = OCP_FUNC_GPIO,
|
||||
.index = 0,
|
||||
.paddr = 0x00000004f0000700ULL,
|
||||
.irq = OCP_IRQ_NA,
|
||||
.pm = IBM_CPM_GPIO0,
|
||||
},
|
||||
{ .vendor = OCP_VENDOR_IBM,
|
||||
.function = OCP_FUNC_MAL,
|
||||
.paddr = OCP_PADDR_NA,
|
||||
.irq = OCP_IRQ_NA,
|
||||
.pm = OCP_CPM_NA,
|
||||
.additions = &ppc440spe_mal0_def,
|
||||
.show = &ocp_show_mal_data,
|
||||
},
|
||||
{ .vendor = OCP_VENDOR_IBM,
|
||||
.function = OCP_FUNC_EMAC,
|
||||
.index = 0,
|
||||
.paddr = 0x00000004f0000800ULL,
|
||||
.irq = 60,
|
||||
.pm = OCP_CPM_NA,
|
||||
.additions = &ppc440spe_emac0_def,
|
||||
.show = &ocp_show_emac_data,
|
||||
},
|
||||
{ .vendor = OCP_VENDOR_INVALID
|
||||
}
|
||||
};
|
||||
|
||||
/* Polarity and triggering settings for internal interrupt sources */
|
||||
struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
|
||||
{ .polarity = 0xffffffff,
|
||||
.triggering = 0x010f0004,
|
||||
.ext_irq_mask = 0x00000000,
|
||||
},
|
||||
{ .polarity = 0xffffffff,
|
||||
.triggering = 0x001f8040,
|
||||
.ext_irq_mask = 0x00007c30, /* IRQ6 - IRQ7, IRQ8 - IRQ12 */
|
||||
},
|
||||
{ .polarity = 0xffffffff,
|
||||
.triggering = 0x00000000,
|
||||
.ext_irq_mask = 0x000000fc, /* IRQ0 - IRQ5 */
|
||||
},
|
||||
{ .polarity = 0xffffffff,
|
||||
.triggering = 0x00000000,
|
||||
.ext_irq_mask = 0x00000000,
|
||||
},
|
||||
};
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* arch/ppc/platforms/4xx/ibm440spe.h
|
||||
*
|
||||
* PPC440SPe definitions
|
||||
*
|
||||
* Roland Dreier <rolandd@cisco.com>
|
||||
* Copyright (c) 2005 Cisco Systems. All rights reserved.
|
||||
*
|
||||
* Matt Porter <mporter@kernel.crashing.org>
|
||||
* Copyright 2004-2005 MontaVista Software, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#ifdef __KERNEL__
|
||||
#ifndef __PPC_PLATFORMS_PPC440SPE_H
|
||||
#define __PPC_PLATFORMS_PPC440SPE_H
|
||||
|
||||
#include <linux/config.h>
|
||||
|
||||
#include <asm/ibm44x.h>
|
||||
|
||||
/* UART */
|
||||
#define PPC440SPE_UART0_ADDR 0x00000004f0000200ULL
|
||||
#define PPC440SPE_UART1_ADDR 0x00000004f0000300ULL
|
||||
#define PPC440SPE_UART2_ADDR 0x00000004f0000600ULL
|
||||
#define UART0_INT 0
|
||||
#define UART1_INT 1
|
||||
#define UART2_INT 37
|
||||
|
||||
/* Clock and Power Management */
|
||||
#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
|
||||
#define IBM_CPM_IIC1 0x40000000 /* IIC interface */
|
||||
#define IBM_CPM_PCI 0x20000000 /* PCI bridge */
|
||||
#define IBM_CPM_CPU 0x02000000 /* processor core */
|
||||
#define IBM_CPM_DMA 0x01000000 /* DMA controller */
|
||||
#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */
|
||||
#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */
|
||||
#define IBM_CPM_EBC 0x00200000 /* External Bux Controller */
|
||||
#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */
|
||||
#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */
|
||||
#define IBM_CPM_PLB 0x00040000 /* PLB bus arbiter */
|
||||
#define IBM_CPM_SRAM 0x00020000 /* SRAM memory controller */
|
||||
#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */
|
||||
#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */
|
||||
#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */
|
||||
#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */
|
||||
#define IBM_CPM_UART0 0x00000200 /* serial port 0 */
|
||||
#define IBM_CPM_UART1 0x00000100 /* serial port 1 */
|
||||
#define IBM_CPM_UART2 0x00000100 /* serial port 1 */
|
||||
#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */
|
||||
#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */
|
||||
#define IBM_CPM_EMAC0 0x00000020 /* EMAC 0 */
|
||||
|
||||
#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
|
||||
| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
|
||||
| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
|
||||
| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
|
||||
| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
|
||||
| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
|
||||
| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
|
||||
#endif /* __PPC_PLATFORMS_PPC440SP_H */
|
||||
#endif /* __KERNEL__ */
|
||||
|
|
@ -15,6 +15,7 @@ obj-$(CONFIG_440EP) += ibm440gx_common.o
|
|||
obj-$(CONFIG_440GP) += ibm440gp_common.o
|
||||
obj-$(CONFIG_440GX) += ibm440gx_common.o
|
||||
obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o
|
||||
obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
|
||||
ifeq ($(CONFIG_4xx),y)
|
||||
ifeq ($(CONFIG_VIRTEX_II_PRO),y)
|
||||
obj-$(CONFIG_40x) += xilinx_pic.o
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* arch/ppc/syslib/ibm440sp_common.c
|
||||
*
|
||||
* PPC440SP system library
|
||||
* PPC440SP/PPC440SPe system library
|
||||
*
|
||||
* Matt Porter <mporter@kernel.crashing.org>
|
||||
* Copyright 2002-2005 MontaVista Software Inc.
|
||||
|
|
@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_of_memory(void)
|
|||
u32 mem_size = 0;
|
||||
|
||||
/* Read two bank sizes and sum */
|
||||
for (i=0; i<2; i++)
|
||||
for (i=0; i< MQ0_NUM_BANKS; i++)
|
||||
switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
|
||||
case MQ0_CONFIG_SIZE_8M:
|
||||
mem_size += PPC44x_MEM_SIZE_8M;
|
||||
|
|
|
|||
|
|
@ -214,7 +214,7 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo
|
|||
/* Called from machine_check_exception */
|
||||
void platform_machine_check(struct pt_regs *regs)
|
||||
{
|
||||
#ifdef CONFIG_440SP
|
||||
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
||||
printk("PLB0: BEAR=0x%08x%08x ACR= 0x%08x BESR= 0x%08x%08x\n",
|
||||
mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
|
||||
mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
|
||||
|
|
|
|||
|
|
@ -0,0 +1,442 @@
|
|||
/*
|
||||
* Copyright (c) 2005 Cisco Systems. All rights reserved.
|
||||
* Roland Dreier <rolandd@cisco.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <asm/reg.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/ibm44x.h>
|
||||
|
||||
#include "ppc440spe_pcie.h"
|
||||
|
||||
static int
|
||||
pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
||||
int len, u32 *val)
|
||||
{
|
||||
struct pci_controller *hose = bus->sysdata;
|
||||
|
||||
if (PCI_SLOT(devfn) != 1)
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
|
||||
offset += devfn << 12;
|
||||
|
||||
/*
|
||||
* Note: the caller has already checked that offset is
|
||||
* suitably aligned and that len is 1, 2 or 4.
|
||||
*/
|
||||
switch (len) {
|
||||
case 1:
|
||||
*val = in_8(hose->cfg_data + offset);
|
||||
break;
|
||||
case 2:
|
||||
*val = in_le16(hose->cfg_data + offset);
|
||||
break;
|
||||
default:
|
||||
*val = in_le32(hose->cfg_data + offset);
|
||||
break;
|
||||
}
|
||||
|
||||
if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
|
||||
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
static int
|
||||
pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
||||
int len, u32 val)
|
||||
{
|
||||
struct pci_controller *hose = bus->sysdata;
|
||||
|
||||
if (PCI_SLOT(devfn) != 1)
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
|
||||
offset += devfn << 12;
|
||||
|
||||
switch (len) {
|
||||
case 1:
|
||||
out_8(hose->cfg_data + offset, val);
|
||||
break;
|
||||
case 2:
|
||||
out_le16(hose->cfg_data + offset, val);
|
||||
break;
|
||||
default:
|
||||
out_le32(hose->cfg_data + offset, val);
|
||||
break;
|
||||
}
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
static struct pci_ops pcie_pci_ops =
|
||||
{
|
||||
.read = pcie_read_config,
|
||||
.write = pcie_write_config
|
||||
};
|
||||
|
||||
enum {
|
||||
PTYPE_ENDPOINT = 0x0,
|
||||
PTYPE_LEGACY_ENDPOINT = 0x1,
|
||||
PTYPE_ROOT_PORT = 0x4,
|
||||
|
||||
LNKW_X1 = 0x1,
|
||||
LNKW_X4 = 0x4,
|
||||
LNKW_X8 = 0x8
|
||||
};
|
||||
|
||||
static void check_error(void)
|
||||
{
|
||||
u32 valPE0, valPE1, valPE2;
|
||||
|
||||
/* SDR0_PEGPLLLCT1 reset */
|
||||
if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
|
||||
printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
|
||||
}
|
||||
|
||||
valPE0 = SDR_READ(PESDR0_RCSSET);
|
||||
valPE1 = SDR_READ(PESDR1_RCSSET);
|
||||
valPE2 = SDR_READ(PESDR2_RCSSET);
|
||||
|
||||
/* SDR0_PExRCSSET rstgu */
|
||||
if ( !(valPE0 & 0x01000000) ||
|
||||
!(valPE1 & 0x01000000) ||
|
||||
!(valPE2 & 0x01000000)) {
|
||||
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
|
||||
}
|
||||
|
||||
/* SDR0_PExRCSSET rstdl */
|
||||
if ( !(valPE0 & 0x00010000) ||
|
||||
!(valPE1 & 0x00010000) ||
|
||||
!(valPE2 & 0x00010000)) {
|
||||
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
|
||||
}
|
||||
|
||||
/* SDR0_PExRCSSET rstpyn */
|
||||
if ( (valPE0 & 0x00001000) ||
|
||||
(valPE1 & 0x00001000) ||
|
||||
(valPE2 & 0x00001000)) {
|
||||
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
|
||||
}
|
||||
|
||||
/* SDR0_PExRCSSET hldplb */
|
||||
if ( (valPE0 & 0x10000000) ||
|
||||
(valPE1 & 0x10000000) ||
|
||||
(valPE2 & 0x10000000)) {
|
||||
printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
|
||||
}
|
||||
|
||||
/* SDR0_PExRCSSET rdy */
|
||||
if ( (valPE0 & 0x00100000) ||
|
||||
(valPE1 & 0x00100000) ||
|
||||
(valPE2 & 0x00100000)) {
|
||||
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
|
||||
}
|
||||
|
||||
/* SDR0_PExRCSSET shutdown */
|
||||
if ( (valPE0 & 0x00000100) ||
|
||||
(valPE1 & 0x00000100) ||
|
||||
(valPE2 & 0x00000100)) {
|
||||
printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* Initialize PCI Express core as described in User Manual section 27.12.1
|
||||
*/
|
||||
int ppc440spe_init_pcie(void)
|
||||
{
|
||||
/* Set PLL clock receiver to LVPECL */
|
||||
SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
|
||||
|
||||
check_error();
|
||||
|
||||
printk(KERN_INFO "PCIE initialization OK\n");
|
||||
|
||||
if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
|
||||
printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
|
||||
SDR_READ(PESDR0_PLLLCT2));
|
||||
|
||||
/* De-assert reset of PCIe PLL, wait for lock */
|
||||
SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
|
||||
udelay(3);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int ppc440spe_init_pcie_rootport(int port)
|
||||
{
|
||||
static int core_init;
|
||||
void __iomem *utl_base;
|
||||
u32 val = 0;
|
||||
int i;
|
||||
|
||||
if (!core_init) {
|
||||
++core_init;
|
||||
i = ppc440spe_init_pcie();
|
||||
if (i)
|
||||
return i;
|
||||
}
|
||||
|
||||
/*
|
||||
* Initialize various parts of the PCI Express core for our port:
|
||||
*
|
||||
* - Set as a root port and enable max width
|
||||
* (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
|
||||
* - Set up UTL configuration.
|
||||
* - Increase SERDES drive strength to levels suggested by AMCC.
|
||||
* - De-assert RSTPYN, RSTDL and RSTGU.
|
||||
*/
|
||||
switch (port) {
|
||||
case 0:
|
||||
SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
|
||||
|
||||
SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
|
||||
SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
|
||||
|
||||
SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
|
||||
|
||||
SDR_WRITE(PESDR0_RCSSET,
|
||||
(SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
|
||||
break;
|
||||
|
||||
case 1:
|
||||
SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
|
||||
|
||||
SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
|
||||
SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
|
||||
|
||||
SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
|
||||
|
||||
SDR_WRITE(PESDR1_RCSSET,
|
||||
(SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
|
||||
break;
|
||||
|
||||
case 2:
|
||||
SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
|
||||
|
||||
SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
|
||||
SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
|
||||
|
||||
SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
|
||||
SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
|
||||
|
||||
SDR_WRITE(PESDR2_RCSSET,
|
||||
(SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
|
||||
break;
|
||||
}
|
||||
|
||||
mdelay(1000);
|
||||
|
||||
switch (port) {
|
||||
case 0: val = SDR_READ(PESDR0_RCSSTS); break;
|
||||
case 1: val = SDR_READ(PESDR1_RCSSTS); break;
|
||||
case 2: val = SDR_READ(PESDR2_RCSSTS); break;
|
||||
}
|
||||
|
||||
if (!(val & (1 << 20)))
|
||||
printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
|
||||
else
|
||||
printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
|
||||
|
||||
switch (port) {
|
||||
case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
|
||||
case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
|
||||
case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
|
||||
}
|
||||
|
||||
/*
|
||||
* Map UTL registers at 0xc_1000_0n00
|
||||
*/
|
||||
switch (port) {
|
||||
case 0:
|
||||
mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
|
||||
mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
|
||||
mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
|
||||
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
|
||||
break;
|
||||
|
||||
case 1:
|
||||
mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
|
||||
mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
|
||||
mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
|
||||
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
|
||||
break;
|
||||
|
||||
case 2:
|
||||
mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
|
||||
mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
|
||||
mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
|
||||
mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
|
||||
}
|
||||
|
||||
utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
|
||||
|
||||
/*
|
||||
* Set buffer allocations and then assert VRB and TXE.
|
||||
*/
|
||||
out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
|
||||
out_be32(utl_base + PEUTL_INTR, 0x02000000);
|
||||
out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
|
||||
out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
|
||||
out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
|
||||
out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
|
||||
out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
|
||||
out_be32(utl_base + PEUTL_PCTL, 0x80800066);
|
||||
|
||||
iounmap(utl_base);
|
||||
|
||||
/*
|
||||
* We map PCI Express configuration access into the 512MB regions
|
||||
* PCIE0: 0xc_4000_0000
|
||||
* PCIE1: 0xc_8000_0000
|
||||
* PCIE2: 0xc_c000_0000
|
||||
*/
|
||||
switch (port) {
|
||||
case 0:
|
||||
mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
|
||||
mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
|
||||
mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
|
||||
break;
|
||||
|
||||
case 1:
|
||||
mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
|
||||
mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
|
||||
mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
|
||||
break;
|
||||
|
||||
case 2:
|
||||
mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
|
||||
mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
|
||||
mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
|
||||
break;
|
||||
}
|
||||
|
||||
/*
|
||||
* Check for VC0 active and assert RDY.
|
||||
*/
|
||||
switch (port) {
|
||||
case 0:
|
||||
if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
|
||||
printk(KERN_WARNING "PCIE0: VC0 not active\n");
|
||||
SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
|
||||
break;
|
||||
case 1:
|
||||
if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
|
||||
printk(KERN_WARNING "PCIE0: VC0 not active\n");
|
||||
SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
|
||||
break;
|
||||
case 2:
|
||||
if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
|
||||
printk(KERN_WARNING "PCIE0: VC0 not active\n");
|
||||
SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
|
||||
break;
|
||||
}
|
||||
|
||||
#if 0
|
||||
/* Dump all config regs */
|
||||
for (i = 0x300; i <= 0x320; ++i)
|
||||
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
||||
for (i = 0x340; i <= 0x353; ++i)
|
||||
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
||||
for (i = 0x370; i <= 0x383; ++i)
|
||||
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
||||
for (i = 0x3a0; i <= 0x3a2; ++i)
|
||||
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
||||
for (i = 0x3c0; i <= 0x3c3; ++i)
|
||||
printk("[%04x] 0x%08x\n", i, SDR_READ(i));
|
||||
#endif
|
||||
|
||||
mdelay(100);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
|
||||
{
|
||||
void __iomem *mbase;
|
||||
|
||||
/*
|
||||
* Map 16MB, which is enough for 4 bits of bus #
|
||||
*/
|
||||
hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
|
||||
1 << 24);
|
||||
hose->ops = &pcie_pci_ops;
|
||||
|
||||
/*
|
||||
* Set bus numbers on our root port
|
||||
*/
|
||||
mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
|
||||
out_8(mbase + PCI_PRIMARY_BUS, 0);
|
||||
out_8(mbase + PCI_SECONDARY_BUS, 0);
|
||||
|
||||
/*
|
||||
* Set up outbound translation to hose->mem_space from PLB
|
||||
* addresses at an offset of 0xd_0000_0000. We set the low
|
||||
* bits of the mask to 11 to turn off splitting into 8
|
||||
* subregions and to enable the outbound translation.
|
||||
*/
|
||||
out_le32(mbase + PECFG_POM0LAH, 0);
|
||||
out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
|
||||
|
||||
switch (port) {
|
||||
case 0:
|
||||
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d);
|
||||
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), hose->mem_space.start);
|
||||
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
|
||||
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
|
||||
~(hose->mem_space.end - hose->mem_space.start) | 3);
|
||||
break;
|
||||
case 1:
|
||||
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d);
|
||||
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), hose->mem_space.start);
|
||||
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
|
||||
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
|
||||
~(hose->mem_space.end - hose->mem_space.start) | 3);
|
||||
|
||||
break;
|
||||
case 2:
|
||||
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d);
|
||||
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), hose->mem_space.start);
|
||||
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
|
||||
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
|
||||
~(hose->mem_space.end - hose->mem_space.start) | 3);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Set up 16GB inbound memory window at 0 */
|
||||
out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
|
||||
out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
|
||||
out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
|
||||
out_le32(mbase + PECFG_BAR0LMPA, 0);
|
||||
out_le32(mbase + PECFG_PIM0LAL, 0);
|
||||
out_le32(mbase + PECFG_PIM0LAH, 0);
|
||||
out_le32(mbase + PECFG_PIMEN, 0x1);
|
||||
|
||||
/* Enable I/O, Mem, and Busmaster cycles */
|
||||
out_le16(mbase + PCI_COMMAND,
|
||||
in_le16(mbase + PCI_COMMAND) |
|
||||
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
||||
|
||||
iounmap(mbase);
|
||||
}
|
||||
|
|
@ -0,0 +1,149 @@
|
|||
/*
|
||||
* Copyright (c) 2005 Cisco Systems. All rights reserved.
|
||||
* Roland Dreier <rolandd@cisco.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H
|
||||
#define __PPC_SYSLIB_PPC440SPE_PCIE_H
|
||||
|
||||
#define DCRN_SDR0_CFGADDR 0x00e
|
||||
#define DCRN_SDR0_CFGDATA 0x00f
|
||||
|
||||
#define DCRN_PCIE0_BASE 0x100
|
||||
#define DCRN_PCIE1_BASE 0x120
|
||||
#define DCRN_PCIE2_BASE 0x140
|
||||
#define PCIE0 DCRN_PCIE0_BASE
|
||||
#define PCIE1 DCRN_PCIE1_BASE
|
||||
#define PCIE2 DCRN_PCIE2_BASE
|
||||
|
||||
#define DCRN_PEGPL_CFGBAH(base) (base + 0x00)
|
||||
#define DCRN_PEGPL_CFGBAL(base) (base + 0x01)
|
||||
#define DCRN_PEGPL_CFGMSK(base) (base + 0x02)
|
||||
#define DCRN_PEGPL_MSGBAH(base) (base + 0x03)
|
||||
#define DCRN_PEGPL_MSGBAL(base) (base + 0x04)
|
||||
#define DCRN_PEGPL_MSGMSK(base) (base + 0x05)
|
||||
#define DCRN_PEGPL_OMR1BAH(base) (base + 0x06)
|
||||
#define DCRN_PEGPL_OMR1BAL(base) (base + 0x07)
|
||||
#define DCRN_PEGPL_OMR1MSKH(base) (base + 0x08)
|
||||
#define DCRN_PEGPL_OMR1MSKL(base) (base + 0x09)
|
||||
#define DCRN_PEGPL_REGBAH(base) (base + 0x12)
|
||||
#define DCRN_PEGPL_REGBAL(base) (base + 0x13)
|
||||
#define DCRN_PEGPL_REGMSK(base) (base + 0x14)
|
||||
#define DCRN_PEGPL_SPECIAL(base) (base + 0x15)
|
||||
|
||||
/*
|
||||
* System DCRs (SDRs)
|
||||
*/
|
||||
#define PESDR0_PLLLCT1 0x03a0
|
||||
#define PESDR0_PLLLCT2 0x03a1
|
||||
#define PESDR0_PLLLCT3 0x03a2
|
||||
|
||||
#define PESDR0_UTLSET1 0x0300
|
||||
#define PESDR0_UTLSET2 0x0301
|
||||
#define PESDR0_DLPSET 0x0302
|
||||
#define PESDR0_LOOP 0x0303
|
||||
#define PESDR0_RCSSET 0x0304
|
||||
#define PESDR0_RCSSTS 0x0305
|
||||
#define PESDR0_HSSL0SET1 0x0306
|
||||
#define PESDR0_HSSL0SET2 0x0307
|
||||
#define PESDR0_HSSL0STS 0x0308
|
||||
#define PESDR0_HSSL1SET1 0x0309
|
||||
#define PESDR0_HSSL1SET2 0x030a
|
||||
#define PESDR0_HSSL1STS 0x030b
|
||||
#define PESDR0_HSSL2SET1 0x030c
|
||||
#define PESDR0_HSSL2SET2 0x030d
|
||||
#define PESDR0_HSSL2STS 0x030e
|
||||
#define PESDR0_HSSL3SET1 0x030f
|
||||
#define PESDR0_HSSL3SET2 0x0310
|
||||
#define PESDR0_HSSL3STS 0x0311
|
||||
#define PESDR0_HSSL4SET1 0x0312
|
||||
#define PESDR0_HSSL4SET2 0x0313
|
||||
#define PESDR0_HSSL4STS 0x0314
|
||||
#define PESDR0_HSSL5SET1 0x0315
|
||||
#define PESDR0_HSSL5SET2 0x0316
|
||||
#define PESDR0_HSSL5STS 0x0317
|
||||
#define PESDR0_HSSL6SET1 0x0318
|
||||
#define PESDR0_HSSL6SET2 0x0319
|
||||
#define PESDR0_HSSL6STS 0x031a
|
||||
#define PESDR0_HSSL7SET1 0x031b
|
||||
#define PESDR0_HSSL7SET2 0x031c
|
||||
#define PESDR0_HSSL7STS 0x031d
|
||||
#define PESDR0_HSSCTLSET 0x031e
|
||||
#define PESDR0_LANE_ABCD 0x031f
|
||||
#define PESDR0_LANE_EFGH 0x0320
|
||||
|
||||
#define PESDR1_UTLSET1 0x0340
|
||||
#define PESDR1_UTLSET2 0x0341
|
||||
#define PESDR1_DLPSET 0x0342
|
||||
#define PESDR1_LOOP 0x0343
|
||||
#define PESDR1_RCSSET 0x0344
|
||||
#define PESDR1_RCSSTS 0x0345
|
||||
#define PESDR1_HSSL0SET1 0x0346
|
||||
#define PESDR1_HSSL0SET2 0x0347
|
||||
#define PESDR1_HSSL0STS 0x0348
|
||||
#define PESDR1_HSSL1SET1 0x0349
|
||||
#define PESDR1_HSSL1SET2 0x034a
|
||||
#define PESDR1_HSSL1STS 0x034b
|
||||
#define PESDR1_HSSL2SET1 0x034c
|
||||
#define PESDR1_HSSL2SET2 0x034d
|
||||
#define PESDR1_HSSL2STS 0x034e
|
||||
#define PESDR1_HSSL3SET1 0x034f
|
||||
#define PESDR1_HSSL3SET2 0x0350
|
||||
#define PESDR1_HSSL3STS 0x0351
|
||||
#define PESDR1_HSSCTLSET 0x0352
|
||||
#define PESDR1_LANE_ABCD 0x0353
|
||||
|
||||
#define PESDR2_UTLSET1 0x0370
|
||||
#define PESDR2_UTLSET2 0x0371
|
||||
#define PESDR2_DLPSET 0x0372
|
||||
#define PESDR2_LOOP 0x0373
|
||||
#define PESDR2_RCSSET 0x0374
|
||||
#define PESDR2_RCSSTS 0x0375
|
||||
#define PESDR2_HSSL0SET1 0x0376
|
||||
#define PESDR2_HSSL0SET2 0x0377
|
||||
#define PESDR2_HSSL0STS 0x0378
|
||||
#define PESDR2_HSSL1SET1 0x0379
|
||||
#define PESDR2_HSSL1SET2 0x037a
|
||||
#define PESDR2_HSSL1STS 0x037b
|
||||
#define PESDR2_HSSL2SET1 0x037c
|
||||
#define PESDR2_HSSL2SET2 0x037d
|
||||
#define PESDR2_HSSL2STS 0x037e
|
||||
#define PESDR2_HSSL3SET1 0x037f
|
||||
#define PESDR2_HSSL3SET2 0x0380
|
||||
#define PESDR2_HSSL3STS 0x0381
|
||||
#define PESDR2_HSSCTLSET 0x0382
|
||||
#define PESDR2_LANE_ABCD 0x0383
|
||||
|
||||
/*
|
||||
* UTL register offsets
|
||||
*/
|
||||
#define PEUTL_PBBSZ 0x20
|
||||
#define PEUTL_OPDBSZ 0x68
|
||||
#define PEUTL_IPHBSZ 0x70
|
||||
#define PEUTL_IPDBSZ 0x78
|
||||
#define PEUTL_OUTTR 0x90
|
||||
#define PEUTL_INTR 0x98
|
||||
#define PEUTL_PCTL 0xa0
|
||||
#define PEUTL_RCIRQEN 0xb8
|
||||
|
||||
/*
|
||||
* Config space register offsets
|
||||
*/
|
||||
#define PECFG_BAR0LMPA 0x210
|
||||
#define PECFG_BAR0HMPA 0x214
|
||||
#define PECFG_PIMEN 0x33c
|
||||
#define PECFG_PIM0LAL 0x340
|
||||
#define PECFG_PIM0LAH 0x344
|
||||
#define PECFG_POM0LAL 0x380
|
||||
#define PECFG_POM0LAH 0x384
|
||||
|
||||
int ppc440spe_init_pcie(void);
|
||||
int ppc440spe_init_pcie_rootport(int port);
|
||||
void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
|
||||
|
||||
#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */
|
||||
|
|
@ -38,6 +38,7 @@ extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak));
|
|||
#define IRQ_MASK_UICx(irq) (1 << (31 - ((irq) & 0x1f)))
|
||||
#define IRQ_MASK_UIC1(irq) IRQ_MASK_UICx(irq)
|
||||
#define IRQ_MASK_UIC2(irq) IRQ_MASK_UICx(irq)
|
||||
#define IRQ_MASK_UIC3(irq) IRQ_MASK_UICx(irq)
|
||||
|
||||
#define UIC_HANDLERS(n) \
|
||||
static void ppc4xx_uic##n##_enable(unsigned int irq) \
|
||||
|
|
@ -88,7 +89,38 @@ static void ppc4xx_uic##n##_end(unsigned int irq) \
|
|||
.end = ppc4xx_uic##n##_end, \
|
||||
} \
|
||||
|
||||
#if NR_UICS == 3
|
||||
#if NR_UICS == 4
|
||||
#define ACK_UIC0_PARENT
|
||||
#define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
|
||||
#define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
|
||||
#define ACK_UIC3_PARENT mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
|
||||
UIC_HANDLERS(0);
|
||||
UIC_HANDLERS(1);
|
||||
UIC_HANDLERS(2);
|
||||
UIC_HANDLERS(3);
|
||||
|
||||
static int ppc4xx_pic_get_irq(struct pt_regs *regs)
|
||||
{
|
||||
u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
|
||||
if (uic0 & UIC0_UIC1NC)
|
||||
return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
|
||||
else if (uic0 & UIC0_UIC2NC)
|
||||
return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
|
||||
else if (uic0 & UIC0_UIC3NC)
|
||||
return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
|
||||
else
|
||||
return uic0 ? 32 - ffs(uic0) : -1;
|
||||
}
|
||||
|
||||
static void __init ppc4xx_pic_impl_init(void)
|
||||
{
|
||||
/* Enable cascade interrupts in UIC0 */
|
||||
ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
|
||||
mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
|
||||
mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
|
||||
}
|
||||
|
||||
#elif NR_UICS == 3
|
||||
#define ACK_UIC0_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
|
||||
#define ACK_UIC1_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
|
||||
#define ACK_UIC2_PARENT mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
|
||||
|
|
@ -170,6 +202,9 @@ static struct ppc4xx_uic_impl {
|
|||
{ .decl = DECLARE_UIC(1), .base = UIC1 },
|
||||
#if NR_UICS > 2
|
||||
{ .decl = DECLARE_UIC(2), .base = UIC2 },
|
||||
#if NR_UICS > 3
|
||||
{ .decl = DECLARE_UIC(3), .base = UIC3 },
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
|
|
|||
|
|
@ -41,6 +41,9 @@
|
|||
#if defined(CONFIG_440SP)
|
||||
#define UART0_PHYS_ERPN 1
|
||||
#define UART0_PHYS_IO_BASE 0xf0000200
|
||||
#elif defined(CONFIG_440SPE)
|
||||
#define UART0_PHYS_ERPN 4
|
||||
#define UART0_PHYS_IO_BASE 0xf0000200
|
||||
#elif defined(CONFIG_440EP)
|
||||
#define UART0_PHYS_IO_BASE 0xe0000000
|
||||
#else
|
||||
|
|
@ -61,6 +64,11 @@
|
|||
#define PPC44x_PCICFG_PAGE 0x0000000900000000ULL
|
||||
#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
|
||||
#define PPC44x_PCIMEM_PAGE 0x0000000a00000000ULL
|
||||
#elif defined(CONFIG_440SPE)
|
||||
#define PPC44x_IO_PAGE 0x0000000400000000ULL
|
||||
#define PPC44x_PCICFG_PAGE 0x0000000c00000000ULL
|
||||
#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
|
||||
#define PPC44x_PCIMEM_PAGE 0x0000000d00000000ULL
|
||||
#elif defined(CONFIG_440EP)
|
||||
#define PPC44x_IO_PAGE 0x0000000000000000ULL
|
||||
#define PPC44x_PCICFG_PAGE 0x0000000000000000ULL
|
||||
|
|
@ -76,7 +84,7 @@
|
|||
/*
|
||||
* 36-bit trap ranges
|
||||
*/
|
||||
#if defined(CONFIG_440SP)
|
||||
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
||||
#define PPC44x_IO_LO 0xf0000000UL
|
||||
#define PPC44x_IO_HI 0xf0000fffUL
|
||||
#define PPC44x_PCI0CFG_LO 0x0ec00000UL
|
||||
|
|
@ -114,7 +122,7 @@
|
|||
*/
|
||||
|
||||
|
||||
/* CPRs (440GX and 440SP) */
|
||||
/* CPRs (440GX and 440SP/440SPe) */
|
||||
#define DCRN_CPR_CONFIG_ADDR 0xc
|
||||
#define DCRN_CPR_CONFIG_DATA 0xd
|
||||
|
||||
|
|
@ -135,7 +143,7 @@
|
|||
mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
|
||||
mtdcr(DCRN_CPR_CONFIG_DATA, data);})
|
||||
|
||||
/* SDRs (440GX and 440SP) */
|
||||
/* SDRs (440GX and 440SP/440SPe) */
|
||||
#define DCRN_SDR_CONFIG_ADDR 0xe
|
||||
#define DCRN_SDR_CONFIG_DATA 0xf
|
||||
#define DCRN_SDR_PFC0 0x4100
|
||||
|
|
@ -185,7 +193,7 @@
|
|||
mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
|
||||
mtdcr(DCRN_SDR_CONFIG_DATA,data);})
|
||||
|
||||
/* DMA (excluding 440SP) */
|
||||
/* DMA (excluding 440SP/440SPe) */
|
||||
#define DCRN_DMA0_BASE 0x100
|
||||
#define DCRN_DMA1_BASE 0x108
|
||||
#define DCRN_DMA2_BASE 0x110
|
||||
|
|
@ -205,12 +213,20 @@
|
|||
/* UIC */
|
||||
#define DCRN_UIC0_BASE 0xc0
|
||||
#define DCRN_UIC1_BASE 0xd0
|
||||
#define DCRN_UIC2_BASE 0x210
|
||||
#define DCRN_UICB_BASE 0x200
|
||||
#define UIC0 DCRN_UIC0_BASE
|
||||
#define UIC1 DCRN_UIC1_BASE
|
||||
|
||||
#ifdef CONFIG_440SPE
|
||||
#define DCRN_UIC2_BASE 0xe0
|
||||
#define DCRN_UIC3_BASE 0xf0
|
||||
#define UIC2 DCRN_UIC2_BASE
|
||||
#define UIC3 DCRN_UIC3_BASE
|
||||
#else
|
||||
#define DCRN_UIC2_BASE 0x210
|
||||
#define DCRN_UICB_BASE 0x200
|
||||
#define UIC2 DCRN_UIC2_BASE
|
||||
#define UICB DCRN_UICB_BASE
|
||||
#endif
|
||||
|
||||
#define DCRN_UIC_SR(base) (base + 0x0)
|
||||
#define DCRN_UIC_ER(base) (base + 0x2)
|
||||
|
|
@ -223,6 +239,12 @@
|
|||
|
||||
#define UIC0_UIC1NC 0x00000002
|
||||
|
||||
#ifdef CONFIG_440SPE
|
||||
#define UIC0_UIC1NC 0x00000002
|
||||
#define UIC0_UIC2NC 0x00200000
|
||||
#define UIC0_UIC3NC 0x00008000
|
||||
#endif
|
||||
|
||||
#define UICB_UIC0NC 0x40000000
|
||||
#define UICB_UIC1NC 0x10000000
|
||||
#define UICB_UIC2NC 0x04000000
|
||||
|
|
@ -302,8 +324,8 @@
|
|||
#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
|
||||
#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
|
||||
|
||||
#if defined(CONFIG_440SP)
|
||||
/* 440SP PLB Arbiter DCRs */
|
||||
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
||||
/* 440SP/440SPe PLB Arbiter DCRs */
|
||||
#define DCRN_PLB_REVID 0x080 /* PLB Revision ID */
|
||||
#define DCRN_PLB_CCR 0x088 /* PLB Crossbar Control */
|
||||
|
||||
|
|
@ -430,9 +452,13 @@
|
|||
#define PPC44x_MEM_SIZE_1G 0x40000000
|
||||
#define PPC44x_MEM_SIZE_2G 0x80000000
|
||||
|
||||
/* 440SP memory controller DCRs */
|
||||
/* 440SP/440SPe memory controller DCRs */
|
||||
#define DCRN_MQ0_BS0BAS 0x40
|
||||
#define DCRN_MQ0_BS1BAS 0x41
|
||||
#if defined(CONFIG_440SP)
|
||||
#define MQ0_NUM_BANKS 2
|
||||
#elif defined(CONFIG_440SPE)
|
||||
#define MQ0_NUM_BANKS 4
|
||||
#endif
|
||||
|
||||
#define MQ0_CONFIG_SIZE_MASK 0x0000fff0
|
||||
#define MQ0_CONFIG_SIZE_8M 0x0000ffc0
|
||||
|
|
@ -444,8 +470,9 @@
|
|||
#define MQ0_CONFIG_SIZE_512M 0x0000f000
|
||||
#define MQ0_CONFIG_SIZE_1G 0x0000e000
|
||||
#define MQ0_CONFIG_SIZE_2G 0x0000c000
|
||||
#define MQ0_CONFIG_SIZE_4G 0x00008000
|
||||
|
||||
/* Internal SRAM Controller 440GX/440SP */
|
||||
/* Internal SRAM Controller 440GX/440SP/440SPe */
|
||||
#define DCRN_SRAM0_BASE 0x000
|
||||
|
||||
#define DCRN_SRAM0_SB0CR (DCRN_SRAM0_BASE + 0x020)
|
||||
|
|
@ -469,7 +496,7 @@
|
|||
#define DCRN_SRAM0_DPC (DCRN_SRAM0_BASE + 0x02a)
|
||||
#define SRAM_DPC_ENABLE 0x80000000
|
||||
|
||||
/* L2 Cache Controller 440GX/440SP */
|
||||
/* L2 Cache Controller 440GX/440SP/440SPe */
|
||||
#define DCRN_L2C0_CFG 0x030
|
||||
#define L2C_CFG_L2M 0x80000000
|
||||
#define L2C_CFG_ICU 0x40000000
|
||||
|
|
@ -633,8 +660,10 @@
|
|||
#define IIC_CLOCK 50
|
||||
|
||||
#undef NR_UICS
|
||||
#ifdef CONFIG_440GX
|
||||
#if defined(CONFIG_440GX)
|
||||
#define NR_UICS 3
|
||||
#elif defined(CONFIG_440SPE)
|
||||
#define NR_UICS 4
|
||||
#else
|
||||
#define NR_UICS 2
|
||||
#endif
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче