ARM: 5978/1: plat-nomadik: use one-shot clock events
This is a complete rewrite of the MTU driver, using one-shot for events and a free-running timer for stamping. It allows CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS to work on Nomadik and Ux500. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Alessandro Rubini
Russell King
Родитель
94bdc0e2d7
Коммит
b102c01fae
|
|
@ -2,7 +2,7 @@
|
|||
* linux/arch/arm/mach-nomadik/timer.c
|
||||
*
|
||||
* Copyright (C) 2008 STMicroelectronics
|
||||
* Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
|
||||
* Copyright (C) 2010 Alessandro Rubini
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2, as
|
||||
|
|
@ -18,123 +18,124 @@
|
|||
|
||||
#include <plat/mtu.h>
|
||||
|
||||
static u32 nmdk_count; /* accumulated count */
|
||||
static u32 nmdk_cycle; /* write-once */
|
||||
void __iomem *mtu_base; /* ssigned by machine code */
|
||||
|
||||
/* setup by the platform code */
|
||||
void __iomem *mtu_base;
|
||||
|
||||
/*
|
||||
* clocksource: the MTU device is a decrementing counters, so we negate
|
||||
* the value being read.
|
||||
*/
|
||||
/* clocksource: MTU decrements, so we negate the value being read. */
|
||||
static cycle_t nmdk_read_timer(struct clocksource *cs)
|
||||
{
|
||||
u32 count = readl(mtu_base + MTU_VAL(0));
|
||||
return nmdk_count + nmdk_cycle - count;
|
||||
|
||||
return -readl(mtu_base + MTU_VAL(0));
|
||||
}
|
||||
|
||||
static struct clocksource nmdk_clksrc = {
|
||||
.name = "mtu_0",
|
||||
.rating = 120,
|
||||
.rating = 200,
|
||||
.read = nmdk_read_timer,
|
||||
.mask = CLOCKSOURCE_MASK(32),
|
||||
.shift = 20,
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
/*
|
||||
* Clockevent device: currently only periodic mode is supported
|
||||
*/
|
||||
/* Clockevent device: use one-shot mode */
|
||||
static void nmdk_clkevt_mode(enum clock_event_mode mode,
|
||||
struct clock_event_device *dev)
|
||||
{
|
||||
u32 cr;
|
||||
|
||||
switch (mode) {
|
||||
case CLOCK_EVT_MODE_PERIODIC:
|
||||
/* count current value? */
|
||||
writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
|
||||
pr_err("%s: periodic mode not supported\n", __func__);
|
||||
break;
|
||||
case CLOCK_EVT_MODE_ONESHOT:
|
||||
BUG(); /* Not supported, yet */
|
||||
/* FALLTHROUGH */
|
||||
/* Load highest value, enable device, enable interrupts */
|
||||
cr = readl(mtu_base + MTU_CR(1));
|
||||
writel(0, mtu_base + MTU_LR(1));
|
||||
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
|
||||
writel(0x2, mtu_base + MTU_IMSC);
|
||||
break;
|
||||
case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
case CLOCK_EVT_MODE_UNUSED:
|
||||
writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
|
||||
/* disable irq */
|
||||
writel(0, mtu_base + MTU_IMSC);
|
||||
break;
|
||||
case CLOCK_EVT_MODE_RESUME:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
|
||||
{
|
||||
/* writing the value has immediate effect */
|
||||
writel(evt, mtu_base + MTU_LR(1));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct clock_event_device nmdk_clkevt = {
|
||||
.name = "mtu_0",
|
||||
.features = CLOCK_EVT_FEAT_PERIODIC,
|
||||
.name = "mtu_1",
|
||||
.features = CLOCK_EVT_FEAT_ONESHOT,
|
||||
.shift = 32,
|
||||
.rating = 100,
|
||||
.rating = 200,
|
||||
.set_mode = nmdk_clkevt_mode,
|
||||
.set_next_event = nmdk_clkevt_next,
|
||||
};
|
||||
|
||||
/*
|
||||
* IRQ Handler for the timer 0 of the MTU block. The irq is not shared
|
||||
* as we are the only users of mtu0 by now.
|
||||
* IRQ Handler for timer 1 of the MTU block.
|
||||
*/
|
||||
static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
/* ack: "interrupt clear register" */
|
||||
writel(1 << 0, mtu_base + MTU_ICR);
|
||||
|
||||
/* we can't count lost ticks, unfortunately */
|
||||
nmdk_count += nmdk_cycle;
|
||||
nmdk_clkevt.event_handler(&nmdk_clkevt);
|
||||
struct clock_event_device *evdev = dev_id;
|
||||
|
||||
writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
|
||||
evdev->event_handler(evdev);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set up timer interrupt, and return the current time in seconds.
|
||||
*/
|
||||
static struct irqaction nmdk_timer_irq = {
|
||||
.name = "Nomadik Timer Tick",
|
||||
.flags = IRQF_DISABLED | IRQF_TIMER,
|
||||
.handler = nmdk_timer_interrupt,
|
||||
.dev_id = &nmdk_clkevt,
|
||||
};
|
||||
|
||||
static void nmdk_timer_reset(void)
|
||||
{
|
||||
u32 cr;
|
||||
|
||||
writel(0, mtu_base + MTU_CR(0)); /* off */
|
||||
|
||||
/* configure load and background-load, and fire it up */
|
||||
writel(nmdk_cycle, mtu_base + MTU_LR(0));
|
||||
writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
|
||||
cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
|
||||
writel(cr, mtu_base + MTU_CR(0));
|
||||
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
|
||||
}
|
||||
|
||||
void __init nmdk_timer_init(void)
|
||||
{
|
||||
unsigned long rate;
|
||||
int bits;
|
||||
u32 cr = MTU_CRn_32BITS;;
|
||||
|
||||
rate = CLOCK_TICK_RATE; /* 2.4MHz */
|
||||
nmdk_cycle = (rate + HZ/2) / HZ;
|
||||
/*
|
||||
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
|
||||
* use a divide-by-16 counter if it's more than 16MHz
|
||||
*/
|
||||
rate = CLOCK_TICK_RATE;
|
||||
if (rate > 16 << 20) {
|
||||
rate /= 16;
|
||||
cr |= MTU_CRn_PRESCALE_16;
|
||||
} else {
|
||||
cr |= MTU_CRn_PRESCALE_1;
|
||||
}
|
||||
|
||||
/* Init the timer and register clocksource */
|
||||
nmdk_timer_reset();
|
||||
/* Timer 0 is the free running clocksource */
|
||||
writel(cr, mtu_base + MTU_CR(0));
|
||||
writel(0, mtu_base + MTU_LR(0));
|
||||
writel(0, mtu_base + MTU_BGLR(0));
|
||||
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
|
||||
|
||||
nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
|
||||
bits = 8*sizeof(nmdk_count);
|
||||
nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
|
||||
|
||||
if (clocksource_register(&nmdk_clksrc))
|
||||
printk(KERN_ERR "timer: failed to initialize clock "
|
||||
"source %s\n", nmdk_clksrc.name);
|
||||
pr_err("timer: failed to initialize clock source %s\n",
|
||||
nmdk_clksrc.name);
|
||||
|
||||
/* Timer 1 is used for events, fix according to rate */
|
||||
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
|
||||
nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
|
||||
nmdk_clkevt.max_delta_ns =
|
||||
clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
|
||||
nmdk_clkevt.min_delta_ns =
|
||||
clockevent_delta2ns(0x00000002, &nmdk_clkevt);
|
||||
nmdk_clkevt.cpumask = cpumask_of(0);
|
||||
|
||||
/* Register irq and clockevents */
|
||||
setup_irq(IRQ_MTU0, &nmdk_timer_irq);
|
||||
nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
|
||||
nmdk_clkevt.cpumask = cpumask_of(0);
|
||||
clockevents_register_device(&nmdk_clkevt);
|
||||
}
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче