regulator: max8973: Set VSEL regmap ops if DVS GPIO is not set

Use regmap helpers for get_voltage_sel and set_voltage_sel ops
if the DVS GPIO is not set.

The DVS GPIO allows on the fly selection of the VSEL register
from two choices. However, if it is not set, the VSEL register
will stay fixed and we can use the regmap ops. This allows use
of the *hardware_vsel* regulator APIs.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Mikko Perttunen 2015-07-28 11:34:11 +03:00 коммит произвёл Mark Brown
Родитель ffaab99184
Коммит b10c7f3cc9
1 изменённых файлов: 9 добавлений и 0 удалений

Просмотреть файл

@ -637,6 +637,15 @@ static int max8973_probe(struct i2c_client *client,
max->lru_index[i] = i;
max->lru_index[0] = max->curr_vout_reg;
max->lru_index[max->curr_vout_reg] = 0;
} else {
/*
* If there is no DVS GPIO, the VOUT register
* address is fixed.
*/
max->ops.set_voltage_sel = regulator_set_voltage_sel_regmap;
max->ops.get_voltage_sel = regulator_get_voltage_sel_regmap;
max->desc.vsel_reg = max->curr_vout_reg;
max->desc.vsel_mask = MAX8973_VOUT_MASK;
}
if (pdata_from_dt)