Merge branch 'for-rmk' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git

Merge branch 'imx-devel' into devel
This commit is contained in:
Russell King 2008-10-09 21:33:03 +01:00 коммит произвёл Russell King
Родитель 3f30a09a61 58a85f465f
Коммит b1add0480a
27 изменённых файлов: 1270 добавлений и 115 удалений

Просмотреть файл

@ -111,6 +111,11 @@
/* decode irq number to use with IMR(x), ISR(x) and friends */
#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
/* all normal IRQs can be FIQs */
#define FIQ_START 0
/* switch betwean IRQ and FIQ */
extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
#define NR_IRQS (IRQ_GPIOD(32) + 1)
#define IRQ_GPIO(x)
#endif

Просмотреть файл

@ -36,10 +36,7 @@
/*
*
* We simply use the ENABLE DISABLE registers inside of the IMX
* to turn on/off specific interrupts. FIXME- We should
* also add support for the accelerated interrupt controller
* by putting offets to irq jump code in the appropriate
* places.
* to turn on/off specific interrupts.
*
*/
@ -102,6 +99,28 @@ imx_unmask_irq(unsigned int irq)
__raw_writel(irq, IMX_AITC_INTENNUM);
}
#ifdef CONFIG_FIQ
int imx_set_irq_fiq(unsigned int irq, unsigned int type)
{
unsigned int irqt;
if (irq >= IMX_IRQS)
return -EINVAL;
if (irq < IMX_IRQS / 2) {
irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
} else {
irq -= IMX_IRQS / 2;
irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
}
return 0;
}
EXPORT_SYMBOL(imx_set_irq_fiq);
#endif /* CONFIG_FIQ */
static int
imx_gpio_irq_type(unsigned int _irq, unsigned int type)
{
@ -284,4 +303,9 @@ imx_init_irq(void)
/* Release masking of interrupts according to priority */
__raw_writel(-1, IMX_AITC_NIMASK);
#ifdef CONFIG_FIQ
/* Initialize FIQ */
init_FIQ();
#endif
}

Просмотреть файл

@ -0,0 +1,15 @@
extern struct platform_device mxc_gpt1;
extern struct platform_device mxc_gpt2;
extern struct platform_device mxc_gpt3;
extern struct platform_device mxc_gpt4;
extern struct platform_device mxc_gpt5;
extern struct platform_device mxc_wdt;
extern struct platform_device mxc_irda_device;
extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_uart_device3;
extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_uart_device5;

Просмотреть файл

@ -34,6 +34,8 @@
#include <mach/iomux-mx1-mx2.h>
#include <mach/board-mx27ads.h>
#include "devices.h"
/* ADS's NOR flash */
static struct physmap_flash_data mx27ads_flash_data = {
.width = 2,
@ -251,12 +253,14 @@ static struct imxuart_platform_data uart_pdata[] = {
static void __init mx27ads_board_init(void)
{
int i;
gpio_fec_active();
for (i = 0; i < 6; i++)
imx_init_uart(i, &uart_pdata[i]);
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}

Просмотреть файл

@ -28,6 +28,8 @@
#include <mach/imx-uart.h>
#include <mach/board-pcm038.h>
#include "devices.h"
/*
* Phytec's phyCORE-i.MX27 comes with 32MiB flash,
* 16 bit width
@ -170,11 +172,11 @@ static struct platform_device *platform_devices[] __initdata = {
static void __init pcm038_init(void)
{
int i;
gpio_fec_active();
for (i = 0; i < 3; i++)
imx_init_uart(i, &uart_pdata[i]);
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));

Просмотреть файл

@ -35,7 +35,7 @@ static struct resource uart0[] = {
},
};
static struct platform_device mxc_uart_device0 = {
struct platform_device mxc_uart_device0 = {
.name = "imx-uart",
.id = 0,
.resource = uart0,
@ -54,7 +54,7 @@ static struct resource uart1[] = {
},
};
static struct platform_device mxc_uart_device1 = {
struct platform_device mxc_uart_device1 = {
.name = "imx-uart",
.id = 1,
.resource = uart1,
@ -73,7 +73,7 @@ static struct resource uart2[] = {
},
};
static struct platform_device mxc_uart_device2 = {
struct platform_device mxc_uart_device2 = {
.name = "imx-uart",
.id = 2,
.resource = uart2,
@ -92,7 +92,7 @@ static struct resource uart3[] = {
},
};
static struct platform_device mxc_uart_device3 = {
struct platform_device mxc_uart_device3 = {
.name = "imx-uart",
.id = 3,
.resource = uart3,
@ -111,7 +111,7 @@ static struct resource uart4[] = {
},
};
static struct platform_device mxc_uart_device4 = {
struct platform_device mxc_uart_device4 = {
.name = "imx-uart",
.id = 4,
.resource = uart4,
@ -130,48 +130,9 @@ static struct resource uart5[] = {
},
};
static struct platform_device mxc_uart_device5 = {
struct platform_device mxc_uart_device5 = {
.name = "imx-uart",
.id = 5,
.resource = uart5,
.num_resources = ARRAY_SIZE(uart5),
};
/*
* Register only those UARTs that physically exists
*/
int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
{
switch (uart_no) {
case 0:
mxc_uart_device0.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device0);
break;
case 1:
mxc_uart_device1.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device1);
break;
#ifndef CONFIG_MXC_IRDA
case 2:
mxc_uart_device2.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device2);
break;
#endif
case 3:
mxc_uart_device3.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device3);
break;
case 4:
mxc_uart_device4.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device4);
break;
case 5:
mxc_uart_device5.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device5);
break;
default:
return -ENODEV;
}
return 0;
}

Просмотреть файл

@ -36,7 +36,7 @@ static struct resource uart0[] = {
},
};
static struct platform_device mxc_uart_device0 = {
struct platform_device mxc_uart_device0 = {
.name = "imx-uart",
.id = 0,
.resource = uart0,
@ -55,7 +55,7 @@ static struct resource uart1[] = {
},
};
static struct platform_device mxc_uart_device1 = {
struct platform_device mxc_uart_device1 = {
.name = "imx-uart",
.id = 1,
.resource = uart1,
@ -74,7 +74,7 @@ static struct resource uart2[] = {
},
};
static struct platform_device mxc_uart_device2 = {
struct platform_device mxc_uart_device2 = {
.name = "imx-uart",
.id = 2,
.resource = uart2,
@ -93,7 +93,7 @@ static struct resource uart3[] = {
},
};
static struct platform_device mxc_uart_device3 = {
struct platform_device mxc_uart_device3 = {
.name = "imx-uart",
.id = 3,
.resource = uart3,
@ -112,46 +112,13 @@ static struct resource uart4[] = {
},
};
static struct platform_device mxc_uart_device4 = {
struct platform_device mxc_uart_device4 = {
.name = "imx-uart",
.id = 4,
.resource = uart4,
.num_resources = ARRAY_SIZE(uart4),
};
/*
* Register only those UARTs that physically exist
*/
int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata)
{
switch (uart_no) {
case 0:
mxc_uart_device0.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device0);
break;
case 1:
mxc_uart_device1.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device1);
break;
case 2:
mxc_uart_device2.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device2);
break;
case 3:
mxc_uart_device3.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device3);
break;
case 4:
mxc_uart_device4.dev.platform_data = pdata;
platform_device_register(&mxc_uart_device4);
break;
default:
return -ENODEV;
}
return 0;
}
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
[0] = {

Просмотреть файл

@ -0,0 +1,6 @@
extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_uart_device3;
extern struct platform_device mxc_uart_device4;

Просмотреть файл

@ -43,7 +43,8 @@ static DEFINE_SPINLOCK(gpio_mux_lock);
*/
int mxc_iomux_mode(unsigned int pin_mode)
{
u32 reg, field, l, mode, ret = 0;
u32 field, l, mode, ret = 0;
void __iomem *reg;
reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
field = pin_mode & 0x3;
@ -70,7 +71,8 @@ EXPORT_SYMBOL(mxc_iomux_mode);
*/
void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
{
u32 reg, field, l;
u32 field, l;
void __iomem *reg;
reg = IOMUXSW_PAD_CTL + (pin + 2) / 3;
field = (pin + 2) % 3;

Просмотреть файл

@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -31,6 +32,8 @@
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/board-mx31ads.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
/*!
* @file mx31ads.c
@ -84,6 +87,108 @@ static inline int mxc_init_extuart(void)
}
#endif
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mxc_init_imx_uart(void)
{
mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
mxc_register_device(&mxc_uart_device0, &uart_pdata);
}
#else /* !SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
{
}
#endif /* !SERIAL_IMX */
static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
{
u32 imr_val;
u32 int_valid;
u32 expio_irq;
imr_val = __raw_readw(PBC_INTMASK_SET_REG);
int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
expio_irq = MXC_EXP_IO_BASE;
for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
if ((int_valid & 1) == 0)
continue;
generic_handle_irq(expio_irq);
}
}
/*
* Disable an expio pin's interrupt by setting the bit in the imr.
* @param irq an expio virtual irq number
*/
static void expio_mask_irq(u32 irq)
{
u32 expio = MXC_IRQ_TO_EXPIO(irq);
/* mask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
__raw_readw(PBC_INTMASK_CLEAR_REG);
}
/*
* Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
* @param irq an expanded io virtual irq number
*/
static void expio_ack_irq(u32 irq)
{
u32 expio = MXC_IRQ_TO_EXPIO(irq);
/* clear the interrupt status */
__raw_writew(1 << expio, PBC_INTSTATUS_REG);
}
/*
* Enable a expio pin's interrupt by clearing the bit in the imr.
* @param irq a expio virtual irq number
*/
static void expio_unmask_irq(u32 irq)
{
u32 expio = MXC_IRQ_TO_EXPIO(irq);
/* unmask the interrupt */
__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
}
static struct irq_chip expio_irq_chip = {
.ack = expio_ack_irq,
.mask = expio_mask_irq,
.unmask = expio_unmask_irq,
};
static void __init mx31ads_init_expio(void)
{
int i;
printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
/*
* Configure INT line as GPIO input
*/
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO));
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
i++) {
set_irq_chip(i, &expio_irq_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
}
/*!
* This structure defines static mappings for the i.MX31ADS board.
*/
@ -120,12 +225,19 @@ void __init mx31ads_map_io(void)
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
void __init mx31ads_init_irq(void)
{
mxc_init_irq();
mx31ads_init_expio();
}
/*!
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
mxc_init_extuart();
mxc_init_imx_uart();
}
static void __init mx31ads_timer_init(void)
@ -148,7 +260,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io,
.init_irq = mxc_init_irq,
.init_irq = mx31ads_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31ads_timer,
MACHINE_END

Просмотреть файл

@ -33,6 +33,8 @@
#include <mach/iomux-mx3.h>
#include <mach/board-pcm037.h>
#include "devices.h"
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
@ -73,12 +75,12 @@ static void __init mxc_board_init(void)
mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
imx_init_uart(0, &uart_pdata);
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
imx_init_uart(2, &uart_pdata);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
}
/*

Просмотреть файл

@ -23,4 +23,15 @@ source "arch/arm/mach-mx3/Kconfig"
endmenu
config MXC_IRQ_PRIOR
bool "Use IRQ priority"
depends on ARCH_MXC
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
by lower priority IRQ even IRQF_DISABLED flag is not set.
This may be useful in embedded applications, where are strong
requirements for timing.
Say N here, unless you have a specialized requirement.
endif

Просмотреть файл

@ -3,6 +3,6 @@
#
# Common support
obj-y := irq.o clock.o gpio.o time.o
obj-y := irq.o clock.o gpio.o time.o devices.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o

Просмотреть файл

@ -0,0 +1,36 @@
/*
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
int __init mxc_register_device(struct platform_device *pdev, void *data)
{
int ret;
pdev->dev.platform_data = data;
ret = platform_device_register(pdev);
if (ret)
pr_debug("Unable to register platform device '%s': %d\n",
pdev->name, ret);
return ret;
}

Просмотреть файл

@ -0,0 +1,840 @@
/*
* linux/arch/arm/plat-mxc/dma-mx1-mx2.c
*
* i.MX DMA registration and IRQ dispatching
*
* Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
* Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
* Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/dma.h>
#include <mach/dma-mx1-mx2.h>
#define DMA_DCR 0x00 /* Control Register */
#define DMA_DISR 0x04 /* Interrupt status Register */
#define DMA_DIMR 0x08 /* Interrupt mask Register */
#define DMA_DBTOSR 0x0c /* Burst timeout status Register */
#define DMA_DRTOSR 0x10 /* Request timeout Register */
#define DMA_DSESR 0x14 /* Transfer Error Status Register */
#define DMA_DBOSR 0x18 /* Buffer overflow status Register */
#define DMA_DBTOCR 0x1c /* Burst timeout control Register */
#define DMA_WSRA 0x40 /* W-Size Register A */
#define DMA_XSRA 0x44 /* X-Size Register A */
#define DMA_YSRA 0x48 /* Y-Size Register A */
#define DMA_WSRB 0x4c /* W-Size Register B */
#define DMA_XSRB 0x50 /* X-Size Register B */
#define DMA_YSRB 0x54 /* Y-Size Register B */
#define DMA_SAR(x) (0x80 + ((x) << 6)) /* Source Address Registers */
#define DMA_DAR(x) (0x84 + ((x) << 6)) /* Destination Address Registers */
#define DMA_CNTR(x) (0x88 + ((x) << 6)) /* Count Registers */
#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */
#define DMA_RSSR(x) (0x90 + ((x) << 6)) /* Request source select Registers */
#define DMA_BLR(x) (0x94 + ((x) << 6)) /* Burst length Registers */
#define DMA_RTOR(x) (0x98 + ((x) << 6)) /* Request timeout Registers */
#define DMA_BUCR(x) (0x98 + ((x) << 6)) /* Bus Utilization Registers */
#define DMA_CCNR(x) (0x9C + ((x) << 6)) /* Channel counter Registers */
#define DCR_DRST (1<<1)
#define DCR_DEN (1<<0)
#define DBTOCR_EN (1<<15)
#define DBTOCR_CNT(x) ((x) & 0x7fff)
#define CNTR_CNT(x) ((x) & 0xffffff)
#define CCR_ACRPT (1<<14)
#define CCR_DMOD_LINEAR (0x0 << 12)
#define CCR_DMOD_2D (0x1 << 12)
#define CCR_DMOD_FIFO (0x2 << 12)
#define CCR_DMOD_EOBFIFO (0x3 << 12)
#define CCR_SMOD_LINEAR (0x0 << 10)
#define CCR_SMOD_2D (0x1 << 10)
#define CCR_SMOD_FIFO (0x2 << 10)
#define CCR_SMOD_EOBFIFO (0x3 << 10)
#define CCR_MDIR_DEC (1<<9)
#define CCR_MSEL_B (1<<8)
#define CCR_DSIZ_32 (0x0 << 6)
#define CCR_DSIZ_8 (0x1 << 6)
#define CCR_DSIZ_16 (0x2 << 6)
#define CCR_SSIZ_32 (0x0 << 4)
#define CCR_SSIZ_8 (0x1 << 4)
#define CCR_SSIZ_16 (0x2 << 4)
#define CCR_REN (1<<3)
#define CCR_RPT (1<<2)
#define CCR_FRC (1<<1)
#define CCR_CEN (1<<0)
#define RTOR_EN (1<<15)
#define RTOR_CLK (1<<14)
#define RTOR_PSC (1<<13)
/*
* struct imx_dma_channel - i.MX specific DMA extension
* @name: name specified by DMA client
* @irq_handler: client callback for end of transfer
* @err_handler: client callback for error condition
* @data: clients context data for callbacks
* @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
* @sg: pointer to the actual read/written chunk for scatter-gather emulation
* @resbytes: total residual number of bytes to transfer
* (it can be lower or same as sum of SG mapped chunk sizes)
* @sgcount: number of chunks to be read/written
*
* Structure is used for IMX DMA processing. It would be probably good
* @struct dma_struct in the future for external interfacing and use
* @struct imx_dma_channel only as extension to it.
*/
struct imx_dma_channel {
const char *name;
void (*irq_handler) (int, void *);
void (*err_handler) (int, void *, int errcode);
void (*prog_handler) (int, void *, struct scatterlist *);
void *data;
dmamode_t dma_mode;
struct scatterlist *sg;
unsigned int resbytes;
int dma_num;
int in_use;
u32 ccr_from_device;
u32 ccr_to_device;
struct timer_list watchdog;
int hw_chaining;
};
static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
static struct clk *dma_clk;
static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
{
if (cpu_is_mx27())
return imxdma->hw_chaining;
else
return 0;
}
/*
* imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
*/
static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
unsigned long now;
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
__func__, channel);
return 0;
}
now = min(imxdma->resbytes, sg->length);
imxdma->resbytes -= now;
if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
else
__raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel));
__raw_writel(now, DMA_BASE + DMA_CNTR(channel));
pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
"size 0x%08x\n", channel,
__raw_readl(DMA_BASE + DMA_DAR(channel)),
__raw_readl(DMA_BASE + DMA_SAR(channel)),
__raw_readl(DMA_BASE + DMA_CNTR(channel)));
return now;
}
/**
* imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from
* device transfer
*
* @channel: i.MX DMA channel number
* @dma_address: the DMA/physical memory address of the linear data block
* to transfer
* @dma_length: length of the data block in bytes
* @dev_addr: physical device port address
* @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
* or %DMA_MODE_WRITE from memory to the device
*
* Return value: if incorrect parameters are provided -%EINVAL.
* Zero indicates success.
*/
int
imx_dma_setup_single(int channel, dma_addr_t dma_address,
unsigned int dma_length, unsigned int dev_addr,
dmamode_t dmamode)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
imxdma->sg = NULL;
imxdma->dma_mode = dmamode;
if (!dma_address) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
channel);
return -EINVAL;
}
if (!dma_length) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
channel);
return -EINVAL;
}
if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
"dev_addr=0x%08x for read\n",
channel, __func__, (unsigned int)dma_address,
dma_length, dev_addr);
__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
__raw_writel(dma_address, DMA_BASE + DMA_DAR(channel));
__raw_writel(imxdma->ccr_from_device,
DMA_BASE + DMA_CCR(channel));
} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
"dev_addr=0x%08x for write\n",
channel, __func__, (unsigned int)dma_address,
dma_length, dev_addr);
__raw_writel(dma_address, DMA_BASE + DMA_SAR(channel));
__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
__raw_writel(imxdma->ccr_to_device,
DMA_BASE + DMA_CCR(channel));
} else {
printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
channel);
return -EINVAL;
}
__raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel));
return 0;
}
EXPORT_SYMBOL(imx_dma_setup_single);
/**
* imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
* @channel: i.MX DMA channel number
* @sg: pointer to the scatter-gather list/vector
* @sgcount: scatter-gather list hungs count
* @dma_length: total length of the transfer request in bytes
* @dev_addr: physical device port address
* @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
* or %DMA_MODE_WRITE from memory to the device
*
* The function sets up DMA channel state and registers to be ready for
* transfer specified by provided parameters. The scatter-gather emulation
* is set up according to the parameters.
*
* The full preparation of the transfer requires setup of more register
* by the caller before imx_dma_enable() can be called.
*
* %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes
*
* %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx
*
* %CCR(channel) has to specify transfer parameters, the next settings is
* typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is
* specified
*
* %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
*
* The typical setup for %DMA_MODE_WRITE is specified by next options
* combination
*
* %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
*
* Be careful here and do not mistakenly mix source and target device
* port sizes constants, they are really different:
* %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
* %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
*
* Return value: if incorrect parameters are provided -%EINVAL.
* Zero indicates success.
*/
int
imx_dma_setup_sg(int channel,
struct scatterlist *sg, unsigned int sgcount,
unsigned int dma_length, unsigned int dev_addr,
dmamode_t dmamode)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
if (imxdma->in_use)
return -EBUSY;
imxdma->sg = sg;
imxdma->dma_mode = dmamode;
imxdma->resbytes = dma_length;
if (!sg || !sgcount) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
channel);
return -EINVAL;
}
if (!sg->length) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
channel);
return -EINVAL;
}
if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
"dev_addr=0x%08x for read\n",
channel, __func__, sg, sgcount, dma_length, dev_addr);
__raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
__raw_writel(imxdma->ccr_from_device,
DMA_BASE + DMA_CCR(channel));
} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
"dev_addr=0x%08x for write\n",
channel, __func__, sg, sgcount, dma_length, dev_addr);
__raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
__raw_writel(imxdma->ccr_to_device,
DMA_BASE + DMA_CCR(channel));
} else {
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
channel);
return -EINVAL;
}
imx_dma_sg_next(channel, sg);
return 0;
}
EXPORT_SYMBOL(imx_dma_setup_sg);
int
imx_dma_config_channel(int channel, unsigned int config_port,
unsigned int config_mem, unsigned int dmareq, int hw_chaining)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
u32 dreq = 0;
imxdma->hw_chaining = 0;
if (hw_chaining) {
imxdma->hw_chaining = 1;
if (!imx_dma_hw_chain(imxdma))
return -EINVAL;
}
if (dmareq)
dreq = CCR_REN;
imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
__raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel));
return 0;
}
EXPORT_SYMBOL(imx_dma_config_channel);
void imx_dma_config_burstlen(int channel, unsigned int burstlen)
{
__raw_writel(burstlen, DMA_BASE + DMA_BLR(channel));
}
EXPORT_SYMBOL(imx_dma_config_burstlen);
/**
* imx_dma_setup_handlers - setup i.MX DMA channel end and error notification
* handlers
* @channel: i.MX DMA channel number
* @irq_handler: the pointer to the function called if the transfer
* ends successfully
* @err_handler: the pointer to the function called if the premature
* end caused by error occurs
* @data: user specified value to be passed to the handlers
*/
int
imx_dma_setup_handlers(int channel,
void (*irq_handler) (int, void *),
void (*err_handler) (int, void *, int),
void *data)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
unsigned long flags;
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
__func__, channel);
return -ENODEV;
}
local_irq_save(flags);
__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
imxdma->irq_handler = irq_handler;
imxdma->err_handler = err_handler;
imxdma->data = data;
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(imx_dma_setup_handlers);
/**
* imx_dma_setup_progression_handler - setup i.MX DMA channel progression
* handlers
* @channel: i.MX DMA channel number
* @prog_handler: the pointer to the function called if the transfer progresses
*/
int
imx_dma_setup_progression_handler(int channel,
void (*prog_handler) (int, void*, struct scatterlist*))
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
unsigned long flags;
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
__func__, channel);
return -ENODEV;
}
local_irq_save(flags);
imxdma->prog_handler = prog_handler;
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(imx_dma_setup_progression_handler);
/**
* imx_dma_enable - function to start i.MX DMA channel operation
* @channel: i.MX DMA channel number
*
* The channel has to be allocated by driver through imx_dma_request()
* or imx_dma_request_by_prio() function.
* The transfer parameters has to be set to the channel registers through
* call of the imx_dma_setup_single() or imx_dma_setup_sg() function
* and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to
* be set prior this function call by the channel user.
*/
void imx_dma_enable(int channel)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
unsigned long flags;
pr_debug("imxdma%d: imx_dma_enable\n", channel);
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
__func__, channel);
return;
}
if (imxdma->in_use)
return;
local_irq_save(flags);
__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel),
DMA_BASE + DMA_DIMR);
__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN |
CCR_ACRPT,
DMA_BASE + DMA_CCR(channel));
#ifdef CONFIG_ARCH_MX2
if (imxdma->sg && imx_dma_hw_chain(imxdma)) {
imxdma->sg = sg_next(imxdma->sg);
if (imxdma->sg) {
u32 tmp;
imx_dma_sg_next(channel, imxdma->sg);
tmp = __raw_readl(DMA_BASE + DMA_CCR(channel));
__raw_writel(tmp | CCR_RPT | CCR_ACRPT,
DMA_BASE + DMA_CCR(channel));
}
}
#endif
imxdma->in_use = 1;
local_irq_restore(flags);
}
EXPORT_SYMBOL(imx_dma_enable);
/**
* imx_dma_disable - stop, finish i.MX DMA channel operatin
* @channel: i.MX DMA channel number
*/
void imx_dma_disable(int channel)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
unsigned long flags;
pr_debug("imxdma%d: imx_dma_disable\n", channel);
if (imx_dma_hw_chain(imxdma))
del_timer(&imxdma->watchdog);
local_irq_save(flags);
__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
DMA_BASE + DMA_DIMR);
__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
DMA_BASE + DMA_CCR(channel));
__raw_writel(1 << channel, DMA_BASE + DMA_DISR);
imxdma->in_use = 0;
local_irq_restore(flags);
}
EXPORT_SYMBOL(imx_dma_disable);
static void imx_dma_watchdog(unsigned long chno)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
__raw_writel(0, DMA_BASE + DMA_CCR(chno));
imxdma->in_use = 0;
imxdma->sg = NULL;
if (imxdma->err_handler)
imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
}
static irqreturn_t dma_err_handler(int irq, void *dev_id)
{
int i, disr;
struct imx_dma_channel *imxdma;
unsigned int err_mask;
int errcode;
disr = __raw_readl(DMA_BASE + DMA_DISR);
err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) |
__raw_readl(DMA_BASE + DMA_DRTOSR) |
__raw_readl(DMA_BASE + DMA_DSESR) |
__raw_readl(DMA_BASE + DMA_DBOSR);
if (!err_mask)
return IRQ_HANDLED;
__raw_writel(disr & err_mask, DMA_BASE + DMA_DISR);
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
if (!(err_mask & (1 << i)))
continue;
imxdma = &imx_dma_channels[i];
errcode = 0;
if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) {
__raw_writel(1 << i, DMA_BASE + DMA_DBTOSR);
errcode |= IMX_DMA_ERR_BURST;
}
if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) {
__raw_writel(1 << i, DMA_BASE + DMA_DRTOSR);
errcode |= IMX_DMA_ERR_REQUEST;
}
if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) {
__raw_writel(1 << i, DMA_BASE + DMA_DSESR);
errcode |= IMX_DMA_ERR_TRANSFER;
}
if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) {
__raw_writel(1 << i, DMA_BASE + DMA_DBOSR);
errcode |= IMX_DMA_ERR_BUFFER;
}
if (imxdma->name && imxdma->err_handler) {
imxdma->err_handler(i, imxdma->data, errcode);
continue;
}
imx_dma_channels[i].sg = NULL;
printk(KERN_WARNING
"DMA timeout on channel %d (%s) -%s%s%s%s\n",
i, imxdma->name,
errcode & IMX_DMA_ERR_BURST ? " burst" : "",
errcode & IMX_DMA_ERR_REQUEST ? " request" : "",
errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
errcode & IMX_DMA_ERR_BUFFER ? " buffer" : "");
}
return IRQ_HANDLED;
}
static void dma_irq_handle_channel(int chno)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
if (!imxdma->name) {
/*
* IRQ for an unregistered DMA channel:
* let's clear the interrupts and disable it.
*/
printk(KERN_WARNING
"spurious IRQ for DMA channel %d\n", chno);
return;
}
if (imxdma->sg) {
u32 tmp;
struct scatterlist *current_sg = imxdma->sg;
imxdma->sg = sg_next(imxdma->sg);
if (imxdma->sg) {
imx_dma_sg_next(chno, imxdma->sg);
tmp = __raw_readl(DMA_BASE + DMA_CCR(chno));
if (imx_dma_hw_chain(imxdma)) {
/* FIXME: The timeout should probably be
* configurable
*/
mod_timer(&imxdma->watchdog,
jiffies + msecs_to_jiffies(500));
tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
__raw_writel(tmp, DMA_BASE +
DMA_CCR(chno));
} else {
__raw_writel(tmp & ~CCR_CEN, DMA_BASE +
DMA_CCR(chno));
tmp |= CCR_CEN;
}
__raw_writel(tmp, DMA_BASE + DMA_CCR(chno));
if (imxdma->prog_handler)
imxdma->prog_handler(chno, imxdma->data,
current_sg);
return;
}
if (imx_dma_hw_chain(imxdma)) {
del_timer(&imxdma->watchdog);
return;
}
}
__raw_writel(0, DMA_BASE + DMA_CCR(chno));
imxdma->in_use = 0;
if (imxdma->irq_handler)
imxdma->irq_handler(chno, imxdma->data);
}
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
int i, disr;
#ifdef CONFIG_ARCH_MX2
dma_err_handler(irq, dev_id);
#endif
disr = __raw_readl(DMA_BASE + DMA_DISR);
pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
disr);
__raw_writel(disr, DMA_BASE + DMA_DISR);
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
if (disr & (1 << i))
dma_irq_handle_channel(i);
}
return IRQ_HANDLED;
}
/**
* imx_dma_request - request/allocate specified channel number
* @channel: i.MX DMA channel number
* @name: the driver/caller own non-%NULL identification
*/
int imx_dma_request(int channel, const char *name)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
unsigned long flags;
int ret;
/* basic sanity checks */
if (!name)
return -EINVAL;
if (channel >= IMX_DMA_CHANNELS) {
printk(KERN_CRIT "%s: called for non-existed channel %d\n",
__func__, channel);
return -EINVAL;
}
local_irq_save(flags);
if (imxdma->name) {
local_irq_restore(flags);
return -EBUSY;
}
#ifdef CONFIG_ARCH_MX2
ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
NULL);
if (ret) {
printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
MXC_INT_DMACH0 + channel, channel);
return ret;
}
init_timer(&imxdma->watchdog);
imxdma->watchdog.function = &imx_dma_watchdog;
imxdma->watchdog.data = channel;
#endif
imxdma->name = name;
imxdma->irq_handler = NULL;
imxdma->err_handler = NULL;
imxdma->data = NULL;
imxdma->sg = NULL;
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL(imx_dma_request);
/**
* imx_dma_free - release previously acquired channel
* @channel: i.MX DMA channel number
*/
void imx_dma_free(int channel)
{
unsigned long flags;
struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
if (!imxdma->name) {
printk(KERN_CRIT
"%s: trying to free free channel %d\n",
__func__, channel);
return;
}
local_irq_save(flags);
/* Disable interrupts */
__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
DMA_BASE + DMA_DIMR);
__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
DMA_BASE + DMA_CCR(channel));
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
free_irq(MXC_INT_DMACH0 + channel, NULL);
#endif
local_irq_restore(flags);
}
EXPORT_SYMBOL(imx_dma_free);
/**
* imx_dma_request_by_prio - find and request some of free channels best
* suiting requested priority
* @channel: i.MX DMA channel number
* @name: the driver/caller own non-%NULL identification
*
* This function tries to find a free channel in the specified priority group
* This function tries to find a free channel in the specified priority group
* if the priority cannot be achieved it tries to look for free channel
* in the higher and then even lower priority groups.
*
* Return value: If there is no free channel to allocate, -%ENODEV is returned.
* On successful allocation channel is returned.
*/
int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio)
{
int i;
int best;
switch (prio) {
case (DMA_PRIO_HIGH):
best = 8;
break;
case (DMA_PRIO_MEDIUM):
best = 4;
break;
case (DMA_PRIO_LOW):
default:
best = 0;
break;
}
for (i = best; i < IMX_DMA_CHANNELS; i++)
if (!imx_dma_request(i, name))
return i;
for (i = best - 1; i >= 0; i--)
if (!imx_dma_request(i, name))
return i;
printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
return -ENODEV;
}
EXPORT_SYMBOL(imx_dma_request_by_prio);
static int __init imx_dma_init(void)
{
int ret = 0;
int i;
dma_clk = clk_get(NULL, "dma_clk");
clk_enable(dma_clk);
/* reset DMA module */
__raw_writel(DCR_DRST, DMA_BASE + DMA_DCR);
#ifdef CONFIG_ARCH_MX1
ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
if (ret) {
printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
return ret;
}
ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
if (ret) {
printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n");
free_irq(DMA_INT, NULL);
return ret;
}
#endif
/* enable DMA module */
__raw_writel(DCR_DEN, DMA_BASE + DMA_DCR);
/* clear all interrupts */
__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR);
/* disable interrupts */
__raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR);
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
imx_dma_channels[i].sg = NULL;
imx_dma_channels[i].dma_num = i;
}
return ret;
}
arch_initcall(imx_dma_init);

Просмотреть файл

@ -90,6 +90,9 @@
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
#define MXC_EXP_IO_BASE (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES)
#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0)
#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1)
#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2)

Просмотреть файл

@ -39,7 +39,7 @@ struct clk {
/* Register bit position for clock's enable/disable control. */
u8 enable_shift;
/* Register address for clock's enable/disable control. */
u32 enable_reg;
void __iomem *enable_reg;
u32 flags;
/* get the current clock rate (always a fresh value) */
unsigned long (*get_rate) (struct clk *);

Просмотреть файл

@ -11,10 +11,13 @@
#ifndef __ASM_ARCH_MXC_COMMON_H__
#define __ASM_ARCH_MXC_COMMON_H__
struct platform_device;
extern void mxc_map_io(void);
extern void mxc_init_irq(void);
extern void mxc_timer_init(const char *clk_timer);
extern int mxc_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
#endif

Просмотреть файл

@ -0,0 +1,89 @@
/*
* linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
*
* i.MX DMA registration and IRQ dispatching
*
* Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
* Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
* Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <asm/dma.h>
#ifndef __ASM_ARCH_MXC_DMA_H
#define __ASM_ARCH_MXC_DMA_H
#define IMX_DMA_CHANNELS 16
#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
#define IMX_DMA_MEMSIZE_32 (0 << 4)
#define IMX_DMA_MEMSIZE_8 (1 << 4)
#define IMX_DMA_MEMSIZE_16 (2 << 4)
#define IMX_DMA_TYPE_LINEAR (0 << 10)
#define IMX_DMA_TYPE_2D (1 << 10)
#define IMX_DMA_TYPE_FIFO (2 << 10)
#define IMX_DMA_ERR_BURST (1 << 0)
#define IMX_DMA_ERR_REQUEST (1 << 1)
#define IMX_DMA_ERR_TRANSFER (1 << 2)
#define IMX_DMA_ERR_BUFFER (1 << 3)
#define IMX_DMA_ERR_TIMEOUT (1 << 4)
int
imx_dma_config_channel(int channel, unsigned int config_port,
unsigned int config_mem, unsigned int dmareq, int hw_chaining);
void
imx_dma_config_burstlen(int channel, unsigned int burstlen);
int
imx_dma_setup_single(int channel, dma_addr_t dma_address,
unsigned int dma_length, unsigned int dev_addr,
dmamode_t dmamode);
int
imx_dma_setup_sg(int channel, struct scatterlist *sg,
unsigned int sgcount, unsigned int dma_length,
unsigned int dev_addr, dmamode_t dmamode);
int
imx_dma_setup_handlers(int channel,
void (*irq_handler) (int, void *),
void (*err_handler) (int, void *, int), void *data);
int
imx_dma_setup_progression_handler(int channel,
void (*prog_handler) (int, void*, struct scatterlist*));
void imx_dma_enable(int channel);
void imx_dma_disable(int channel);
int imx_dma_request(int channel, const char *name);
void imx_dma_free(int channel);
enum imx_dma_prio {
DMA_PRIO_HIGH = 0,
DMA_PRIO_MEDIUM = 1,
DMA_PRIO_LOW = 2
};
int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
#endif /* _ASM_ARCH_MXC_DMA_H */

Просмотреть файл

@ -9,11 +9,17 @@
* published by the Free Software Foundation.
*/
#define AVIC_NIMASK 0x04
@ this macro disables fast irq (not implemented)
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
#ifdef CONFIG_MXC_IRQ_PRIOR
ldr r4, [\base, #AVIC_NIMASK]
#endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
@ -23,7 +29,6 @@
@ and returns its number in irqnr
@ and returns if an interrupt occured in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
@ Load offset & priority of the highest priority
@ interrupt pending from AVIC_NIVECSR
ldr \irqstat, [\base, #0x40]
@ -32,6 +37,11 @@
mov \irqnr, \irqstat, asr #16
@ set zero flag if IRQ + 1 == 0
adds \tmp, \irqnr, #1
#ifdef CONFIG_MXC_IRQ_PRIOR
bicne \tmp, \irqstat, #0xFFFFFFE0
strne \tmp, [\base, #AVIC_NIMASK]
streq r4, [\base, #AVIC_NIMASK]
#endif
.endm
@ irq priority table (not used)

Просмотреть файл

@ -247,6 +247,11 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#endif
#ifdef CONFIG_ARCH_MX2
#define PA0_PF_USBH2_CLK (GPIO_PORTA | GPIO_PF | 0)
#define PA1_PF_USBH2_DIR (GPIO_PORTA | GPIO_PF | 1)
#define PA2_PF_USBH2_DATA7 (GPIO_PORTA | GPIO_PF | 2)
#define PA3_PF_USBH2_NXT (GPIO_PORTA | GPIO_PF | 3)
#define PA4_PF_USBH2_STP (GPIO_PORTA | GPIO_PF | 4)
#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
@ -294,6 +299,16 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21)
#define PB22_PF_USBH1_SUSP (GPIO_PORTB | GPIO_PF | 22)
#define PB23_PF_USB_PWR (GPIO_PORTB | GPIO_PF | 23)
#define PB24_PF_USB_OC_B (GPIO_PORTB | GPIO_PF | 24)
#define PB25_PF_USBH1_RCV (GPIO_PORTB | GPIO_PF | 25)
#define PB26_PF_USBH1_FS (GPIO_PORTB | GPIO_PF | 26)
#define PB27_PF_USBH1_OE_B (GPIO_PORTB | GPIO_PF | 27)
#define PB28_PF_USBH1_TXDM (GPIO_PORTB | GPIO_PF | 28)
#define PB29_PF_USBH1_TXDP (GPIO_PORTB | GPIO_PF | 29)
#define PB30_PF_USBH1_RXDM (GPIO_PORTB | GPIO_PF | 30)
#define PB31_PF_USBH1_RXDP (GPIO_PORTB | GPIO_PF | 31)
#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26)
#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
@ -335,8 +350,15 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
#define PD19_AF_USBH2_DATA4 (GPIO_PORTD | GPIO_AF | 19)
#define PD20_AF_USBH2_DATA3 (GPIO_PORTD | GPIO_AF | 20)
#define PD21_AF_USBH2_DATA6 (GPIO_PORTD | GPIO_AF | 21)
#define PD22_AF_USBH2_DATA0 (GPIO_PORTD | GPIO_AF | 22)
#define PD23_AF_USBH2_DATA2 (GPIO_PORTD | GPIO_AF | 23)
#define PD24_AF_USBH2_DATA1 (GPIO_PORTD | GPIO_AF | 24)
#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
#define PD26_AF_USBH2_DATA5 (GPIO_PORTD | GPIO_AF | 26)
#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
@ -355,6 +377,8 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13)
#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15)
#define PE16_AF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
#define PE16_PF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18)
#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)

Просмотреть файл

@ -491,6 +491,26 @@ enum iomux_pins {
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SS0__SS0 IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SS1__SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI2_SS2__SS2 IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
/*
* This function configures the pad value for a IOMUX pin.

Просмотреть файл

@ -12,5 +12,6 @@
#define __ASM_ARCH_MXC_IRQS_H__
#include <mach/hardware.h>
extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
#endif /* __ASM_ARCH_MXC_IRQS_H__ */

Просмотреть файл

@ -128,6 +128,7 @@
* it returns 0xDEADBEEF
*/
#define IO_ADDRESS(x) \
(void __iomem *) \
(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
AIPI_IO_ADDRESS(x) : \
((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \

Просмотреть файл

@ -198,6 +198,7 @@
* it returns 0xDEADBEEF
*/
#define IO_ADDRESS(x) \
(void __iomem *) \
(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\

Просмотреть файл

@ -33,4 +33,10 @@
# define cpu_is_mx27() (0)
#endif
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
#endif
#endif /* __ASM_ARCH_MXC_H__ */

Просмотреть файл

@ -30,14 +30,7 @@
#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */
#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */
#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */
#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */
#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */
#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */
#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */
#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */
#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
@ -54,6 +47,24 @@
#define IIM_PROD_REV_SH 3
#define IIM_PROD_REV_LEN 5
#ifdef CONFIG_MXC_IRQ_PRIOR
void imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
if (irq > 63)
return;
temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
}
EXPORT_SYMBOL(imx_irq_set_priority);
#endif
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
@ -101,10 +112,9 @@ void __init mxc_init_irq(void)
set_irq_flags(i, IRQF_VALID);
}
/* Set WDOG2's interrupt the highest priority level (bit 28-31) */
reg = __raw_readl(AVIC_NIPRIORITY6);
reg |= (0xF << 28);
__raw_writel(reg, AVIC_NIPRIORITY6);
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
__raw_writel(0, AVIC_NIPRIORITY(i));
/* init architectures chained interrupt handler */
mxc_register_gpios();