From 795e6bf33561ff03e253a6a756d5eb663b4a56bd Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Tue, 4 Mar 2008 15:23:45 -0800
Subject: [PATCH 01/27] sh: SuperH KEYSC platform driver

Add a platform driver for the SuperH KEYSC block.  The driver expects to get
mode, timing information and keypad layout from the board code as platform
data.  The board code is resonsible for pin configuration.

Both sh7343 and sh7722 should be supported, but only the sh7722 processor has
been tested so far.  SH_KEYSC_MODE_3 is yet to be tested.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/input/keyboard/Kconfig    |   9 +
 drivers/input/keyboard/Makefile   |   1 +
 drivers/input/keyboard/sh_keysc.c | 281 ++++++++++++++++++++++++++++++
 include/asm-sh/sh_keysc.h         |  13 ++
 4 files changed, 304 insertions(+)
 create mode 100644 drivers/input/keyboard/sh_keysc.c
 create mode 100644 include/asm-sh/sh_keysc.h

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 8ea709be3306..efd70a974591 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -314,4 +314,13 @@ config KEYBOARD_BFIN
 	  To compile this driver as a module, choose M here: the
 	  module will be called bf54x-keys.
 
+config KEYBOARD_SH_KEYSC
+	tristate "SuperH KEYSC keypad support"
+	depends on SUPERH
+	help
+	  Say Y here if you want to use a keypad attached to the KEYSC block
+	  on SuperH processors such as sh7722 and sh7343.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sh_keysc.
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index e741f4031012..0edc8f285d1c 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
+obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
new file mode 100644
index 000000000000..5d0864a9e94b
--- /dev/null
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -0,0 +1,281 @@
+/*
+ * SuperH KEYSC Keypad Driver
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on gpio_keys.c, Copyright 2005 Phil Blundell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <asm/sh_keysc.h>
+
+#define KYCR1_OFFS   0x00
+#define KYCR2_OFFS   0x04
+#define KYINDR_OFFS  0x08
+#define KYOUTDR_OFFS 0x0c
+
+#define KYCR2_IRQ_LEVEL    0x10
+#define KYCR2_IRQ_DISABLED 0x00
+
+static const struct {
+	unsigned char kymd, keyout, keyin;
+} sh_keysc_mode[] = {
+	[SH_KEYSC_MODE_1] = { 0, 6, 5 },
+	[SH_KEYSC_MODE_2] = { 1, 5, 6 },
+	[SH_KEYSC_MODE_3] = { 2, 4, 7 },
+};
+
+struct sh_keysc_priv {
+	void __iomem *iomem_base;
+	unsigned long last_keys;
+	struct input_dev *input;
+	struct sh_keysc_info pdata;
+};
+
+static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
+	struct sh_keysc_info *pdata = &priv->pdata;
+	unsigned long keys, keys1, keys0, mask;
+	unsigned char keyin_set, tmp;
+	int i, k;
+
+	dev_dbg(&pdev->dev, "isr!\n");
+
+	keys1 = ~0;
+	keys0 = 0;
+
+	do {
+		keys = 0;
+		keyin_set = 0;
+
+		iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
+
+		for (i = 0; i < sh_keysc_mode[pdata->mode].keyout; i++) {
+			iowrite16(0xfff ^ (3 << (i * 2)),
+				  priv->iomem_base + KYOUTDR_OFFS);
+			udelay(pdata->delay);
+			tmp = ioread16(priv->iomem_base + KYINDR_OFFS);
+			keys |= tmp << (sh_keysc_mode[pdata->mode].keyin * i);
+			tmp ^= (1 << sh_keysc_mode[pdata->mode].keyin) - 1;
+			keyin_set |= tmp;
+		}
+
+		iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
+		iowrite16(KYCR2_IRQ_LEVEL | (keyin_set << 8),
+			  priv->iomem_base + KYCR2_OFFS);
+
+		keys ^= ~0;
+		keys &= (1 << (sh_keysc_mode[pdata->mode].keyin *
+			       sh_keysc_mode[pdata->mode].keyout)) - 1;
+		keys1 &= keys;
+		keys0 |= keys;
+
+		dev_dbg(&pdev->dev, "keys 0x%08lx\n", keys);
+
+	} while (ioread16(priv->iomem_base + KYCR2_OFFS) & 0x01);
+
+	dev_dbg(&pdev->dev, "last_keys 0x%08lx keys0 0x%08lx keys1 0x%08lx\n",
+		priv->last_keys, keys0, keys1);
+
+	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
+		k = pdata->keycodes[i];
+		if (!k)
+			continue;
+
+		mask = 1 << i;
+
+		if (!((priv->last_keys ^ keys0) & mask))
+			continue;
+
+		if ((keys1 | keys0) & mask) {
+			input_event(priv->input, EV_KEY, k, 1);
+			priv->last_keys |= mask;
+		}
+
+		if (!(keys1 & mask)) {
+			input_event(priv->input, EV_KEY, k, 0);
+			priv->last_keys &= ~mask;
+		}
+
+	}
+	input_sync(priv->input);
+
+	return IRQ_HANDLED;
+}
+
+#define res_size(res) ((res)->end - (res)->start + 1)
+
+static int __devinit sh_keysc_probe(struct platform_device *pdev)
+{
+	struct sh_keysc_priv *priv;
+	struct sh_keysc_info *pdata;
+	struct resource *res;
+	struct input_dev *input;
+	int i, k;
+	int irq, error;
+
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		error = -EINVAL;
+		goto err0;
+	}
+
+	error = -ENXIO;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get I/O memory\n");
+		goto err0;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		goto err0;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (priv == NULL) {
+		dev_err(&pdev->dev, "failed to allocate driver data\n");
+		error = -ENOMEM;
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata));
+	pdata = &priv->pdata;
+
+	res = request_mem_region(res->start, res_size(res), pdev->name);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		error = -EBUSY;
+		goto err1;
+	}
+
+	priv->iomem_base = ioremap_nocache(res->start, res_size(res));
+	if (priv->iomem_base == NULL) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -ENXIO;
+		goto err2;
+	}
+
+	priv->input = input_allocate_device();
+	if (!priv->input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		error = -ENOMEM;
+		goto err3;
+	}
+
+	input = priv->input;
+	input->evbit[0] = BIT_MASK(EV_KEY);
+
+	input->name = pdev->name;
+	input->phys = "sh-keysc-keys/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		goto err4;
+	}
+
+	for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
+		k = pdata->keycodes[i];
+		if (k)
+			input_set_capability(input, EV_KEY, k);
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto err5;
+	}
+
+	iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
+		  pdata->scan_timing, priv->iomem_base + KYCR1_OFFS);
+	iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
+	iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
+	return 0;
+ err5:
+	free_irq(irq, pdev);
+ err4:
+	input_free_device(input);
+ err3:
+	iounmap(priv->iomem_base);
+ err2:
+	release_mem_region(res->start, res_size(res));
+ err1:
+	platform_set_drvdata(pdev, NULL);
+	kfree(priv);
+ err0:
+	return error;
+}
+
+static int __devexit sh_keysc_remove(struct platform_device *pdev)
+{
+	struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
+
+	input_unregister_device(priv->input);
+	free_irq(platform_get_irq(pdev, 0), pdev);
+	input_free_device(priv->input);
+	iounmap(priv->iomem_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res_size(res));
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(priv);
+	return 0;
+}
+
+
+#define sh_keysc_suspend NULL
+#define sh_keysc_resume NULL
+
+struct platform_driver sh_keysc_device_driver = {
+	.probe		= sh_keysc_probe,
+	.remove		= __devexit_p(sh_keysc_remove),
+	.suspend	= sh_keysc_suspend,
+	.resume		= sh_keysc_resume,
+	.driver		= {
+		.name	= "sh_keysc",
+	}
+};
+
+static int __init sh_keysc_init(void)
+{
+	return platform_driver_register(&sh_keysc_device_driver);
+}
+
+static void __exit sh_keysc_exit(void)
+{
+	platform_driver_unregister(&sh_keysc_device_driver);
+}
+
+module_init(sh_keysc_init);
+module_exit(sh_keysc_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-sh/sh_keysc.h b/include/asm-sh/sh_keysc.h
new file mode 100644
index 000000000000..b5a4dd5a9729
--- /dev/null
+++ b/include/asm-sh/sh_keysc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_KEYSC_H__
+#define __ASM_KEYSC_H__
+
+#define SH_KEYSC_MAXKEYS 30
+
+struct sh_keysc_info {
+	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
+	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
+	int delay;
+	int keycodes[SH_KEYSC_MAXKEYS];
+};
+
+#endif /* __ASM_KEYSC_H__ */

From 92cfeb610d1da059b395501142915fadaa1625bf Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Tue, 4 Mar 2008 15:23:45 -0800
Subject: [PATCH 02/27] sh: SuperH KEYSC keypad data for MigoR

Add KEYSC platform data for the sh7722 MigoR board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/migor/setup.c | 56 +++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 21ab8c8fb590..8a6ee842624f 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -10,8 +10,10 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/input.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
+#include <asm/sh_keysc.h>
 
 /* Address     IRQ  Size  Bus  Description
  * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
@@ -40,8 +42,43 @@ static struct platform_device smc91x_eth_device = {
 	.resource       = smc91x_eth_resources,
 };
 
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = {
+		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
+		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
+		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
 static struct platform_device *migor_devices[] __initdata = {
 	&smc91x_eth_device,
+	&sh_keysc_device,
 };
 
 static int __init migor_devices_setup(void)
@@ -50,9 +87,26 @@ static int __init migor_devices_setup(void)
 }
 __initcall(migor_devices_setup);
 
+#define PORT_PJCR       0xA4050110UL
+#define PORT_PSELA      0xA405014EUL
+#define PORT_PYCR       0xA405014AUL
+#define PORT_PZCR       0xA405014CUL
+#define PORT_HIZCRA     0xA4050158UL
+#define PORT_HIZCRC     0xA405015CUL
+#define MSTPCR2         0xA4150038UL
+
 static void __init migor_setup(char **cmdline_p)
 {
-	ctrl_outw(0x1000, 0xa4050110); /* Enable IRQ0 in PJCR */
+	/* SMC91C111 - Enable IRQ0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
+
+	/* KEYSC */
+	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+	ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {

From 90fce7f4fb98c4256976aaa89b4453a544d74fd4 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Tue, 4 Mar 2008 15:23:46 -0800
Subject: [PATCH 03/27] sh: SuperH KEYSC keypad data for Solution Engine 7722

Add KEYSC platform data for the Solution Engine 7722 board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/se/7722/setup.c | 41 ++++++++++++++++++++++++++++++++++
 include/asm-sh/se7722.h        |  2 ++
 2 files changed, 43 insertions(+)

diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index b1a3d9d0172f..33f6ee71f848 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -13,10 +13,12 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
+#include <linux/input.h>
 #include <asm/machvec.h>
 #include <asm/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
 
 /* Heartbeat */
 static struct heartbeat_data heartbeat_data = {
@@ -92,10 +94,47 @@ static struct platform_device cf_ide_device  = {
 	.resource       = cf_ide_resources,
 };
 
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = { /* SW1 -> SW30 */
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+		KEY_Z,
+		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
 static struct platform_device *se7722_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
 	&cf_ide_device,
+	&sh_keysc_device,
 };
 
 static int __init se7722_devices_setup(void)
@@ -136,6 +175,8 @@ static void __init se7722_setup(char **cmdline_p)
 	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
 	ctrl_outw(0x0000, PORT_PYCR);
 	ctrl_outw(0x0000, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
 }
 
 /*
diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h
index e0e89fcb8388..3690fe5857a4 100644
--- a/include/asm-sh/se7722.h
+++ b/include/asm-sh/se7722.h
@@ -77,6 +77,8 @@
 #define PORT_PSELA      0xA405014EUL
 #define PORT_PYCR       0xA405014AUL
 #define PORT_PZCR       0xA405014CUL
+#define PORT_HIZCRA     0xA4050158UL
+#define PORT_HIZCRC     0xA405015CUL
 
 /* IRQ */
 #define IRQ0_IRQ        32

From b420b1a7a17ea88531d0e12b2f2679a0c8365803 Mon Sep 17 00:00:00 2001
From: Angelo Castello <angelo.castello@st.com>
Date: Thu, 6 Mar 2008 12:50:53 +0900
Subject: [PATCH 04/27] rtc: rtc-sh: Add support for periodic IRQs.

This adds support for periodic IRQs to the rtc-sh driver.
RTC_IRQP_READ/RTC_IRQP_SET are added, with a number of other fixes and
reordering across the rest of the code.

Signed-off-by: Angelo Castello <angelo.castello@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/rtc/rtc-sh.c | 302 +++++++++++++++++++++++++++----------------
 1 file changed, 190 insertions(+), 112 deletions(-)

diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 9e9caa5d7f5f..c594b34c6767 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -1,8 +1,9 @@
 /*
  * SuperH On-Chip RTC Support
  *
- * Copyright (C) 2006, 2007  Paul Mundt
+ * Copyright (C) 2006, 2007, 2008  Paul Mundt
  * Copyright (C) 2006  Jamie Lenehan
+ * Copyright (C) 2008  Angelo Castello
  *
  * Based on the old arch/sh/kernel/cpu/rtc.c by:
  *
@@ -26,7 +27,7 @@
 #include <asm/rtc.h>
 
 #define DRV_NAME	"sh-rtc"
-#define DRV_VERSION	"0.1.6"
+#define DRV_VERSION	"0.2.0"
 
 #define RTC_REG(r)	((r) * rtc_reg_size)
 
@@ -63,6 +64,13 @@
 /* ALARM Bits - or with BCD encoded value */
 #define AR_ENB		0x80	/* Enable for alarm cmp   */
 
+/* Period Bits */
+#define PF_HP		0x100	/* Enable Half Period to support 8,32,128Hz */
+#define PF_COUNT	0x200	/* Half periodic counter */
+#define PF_OXS		0x400	/* Periodic One x Second */
+#define PF_KOU		0x800	/* Kernel or User periodic request 1=kernel */
+#define PF_MASK		0xf00
+
 /* RCR1 Bits */
 #define RCR1_CF		0x80	/* Carry Flag             */
 #define RCR1_CIE	0x10	/* Carry Interrupt Enable */
@@ -84,33 +92,24 @@ struct sh_rtc {
 	unsigned int alarm_irq, periodic_irq, carry_irq;
 	struct rtc_device *rtc_dev;
 	spinlock_t lock;
-	int rearm_aie;
 	unsigned long capabilities;	/* See asm-sh/rtc.h for cap bits */
+	unsigned short periodic_freq;
 };
 
 static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id)
 {
-	struct platform_device *pdev = to_platform_device(dev_id);
-	struct sh_rtc *rtc = platform_get_drvdata(pdev);
-	unsigned int tmp, events = 0;
+	struct sh_rtc *rtc = dev_id;
+	unsigned int tmp;
 
 	spin_lock(&rtc->lock);
 
 	tmp = readb(rtc->regbase + RCR1);
 	tmp &= ~RCR1_CF;
-
-	if (rtc->rearm_aie) {
-		if (tmp & RCR1_AF)
-			tmp &= ~RCR1_AF;	/* try to clear AF again */
-		else {
-			tmp |= RCR1_AIE;	/* AF has cleared, rearm IRQ */
-			rtc->rearm_aie = 0;
-		}
-	}
-
 	writeb(tmp, rtc->regbase + RCR1);
 
-	rtc_update_irq(rtc->rtc_dev, 1, events);
+	/* Users have requested One x Second IRQ */
+	if (rtc->periodic_freq & PF_OXS)
+		rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
 
 	spin_unlock(&rtc->lock);
 
@@ -119,47 +118,48 @@ static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id)
 
 static irqreturn_t sh_rtc_alarm(int irq, void *dev_id)
 {
-	struct platform_device *pdev = to_platform_device(dev_id);
-	struct sh_rtc *rtc = platform_get_drvdata(pdev);
-	unsigned int tmp, events = 0;
+	struct sh_rtc *rtc = dev_id;
+	unsigned int tmp;
 
 	spin_lock(&rtc->lock);
 
 	tmp = readb(rtc->regbase + RCR1);
-
-	/*
-	 * If AF is set then the alarm has triggered. If we clear AF while
-	 * the alarm time still matches the RTC time then AF will
-	 * immediately be set again, and if AIE is enabled then the alarm
-	 * interrupt will immediately be retrigger. So we clear AIE here
-	 * and use rtc->rearm_aie so that the carry interrupt will keep
-	 * trying to clear AF and once it stays cleared it'll re-enable
-	 * AIE.
-	 */
-	if (tmp & RCR1_AF) {
-		events |= RTC_AF | RTC_IRQF;
-
-		tmp &= ~(RCR1_AF|RCR1_AIE);
-
+	tmp &= ~(RCR1_AF | RCR1_AIE);
 		writeb(tmp, rtc->regbase + RCR1);
 
-		rtc->rearm_aie = 1;
-
-		rtc_update_irq(rtc->rtc_dev, 1, events);
-	}
+	rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
 
 	spin_unlock(&rtc->lock);
+
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t sh_rtc_periodic(int irq, void *dev_id)
 {
-	struct platform_device *pdev = to_platform_device(dev_id);
-	struct sh_rtc *rtc = platform_get_drvdata(pdev);
+	struct sh_rtc *rtc = dev_id;
+	struct rtc_device *rtc_dev = rtc->rtc_dev;
+	unsigned int tmp;
 
 	spin_lock(&rtc->lock);
 
-	rtc_update_irq(rtc->rtc_dev, 1, RTC_PF | RTC_IRQF);
+	tmp = readb(rtc->regbase + RCR2);
+	tmp &= ~RCR2_PEF;
+	writeb(tmp, rtc->regbase + RCR2);
+
+	/* Half period enabled than one skipped and the next notified */
+	if ((rtc->periodic_freq & PF_HP) && (rtc->periodic_freq & PF_COUNT))
+		rtc->periodic_freq &= ~PF_COUNT;
+	else {
+		if (rtc->periodic_freq & PF_HP)
+			rtc->periodic_freq |= PF_COUNT;
+		if (rtc->periodic_freq & PF_KOU) {
+			spin_lock(&rtc_dev->irq_task_lock);
+			if (rtc_dev->irq_task)
+				rtc_dev->irq_task->func(rtc_dev->irq_task->private_data);
+			spin_unlock(&rtc_dev->irq_task_lock);
+		} else
+			rtc_update_irq(rtc->rtc_dev, 1, RTC_PF | RTC_IRQF);
+	}
 
 	spin_unlock(&rtc->lock);
 
@@ -176,8 +176,8 @@ static inline void sh_rtc_setpie(struct device *dev, unsigned int enable)
 	tmp = readb(rtc->regbase + RCR2);
 
 	if (enable) {
-		tmp &= ~RCR2_PESMASK;
-		tmp |= RCR2_PEF | (2 << 4);
+		tmp &= ~RCR2_PEF;	/* Clear PES bit */
+		tmp |= (rtc->periodic_freq & ~PF_HP);	/* Set PES2-0 */
 	} else
 		tmp &= ~(RCR2_PESMASK | RCR2_PEF);
 
@@ -186,6 +186,58 @@ static inline void sh_rtc_setpie(struct device *dev, unsigned int enable)
 	spin_unlock_irq(&rtc->lock);
 }
 
+static inline int sh_rtc_setfreq(struct device *dev, unsigned int freq)
+{
+	struct sh_rtc *rtc = dev_get_drvdata(dev);
+	int tmp, ret = 0;
+
+	spin_lock_irq(&rtc->lock);
+	tmp = rtc->periodic_freq & PF_MASK;
+
+	switch (freq) {
+	case 0:
+		rtc->periodic_freq = 0x00;
+		break;
+	case 1:
+		rtc->periodic_freq = 0x60;
+		break;
+	case 2:
+		rtc->periodic_freq = 0x50;
+		break;
+	case 4:
+		rtc->periodic_freq = 0x40;
+		break;
+	case 8:
+		rtc->periodic_freq = 0x30 | PF_HP;
+		break;
+	case 16:
+		rtc->periodic_freq = 0x30;
+		break;
+	case 32:
+		rtc->periodic_freq = 0x20 | PF_HP;
+		break;
+	case 64:
+		rtc->periodic_freq = 0x20;
+		break;
+	case 128:
+		rtc->periodic_freq = 0x10 | PF_HP;
+		break;
+	case 256:
+		rtc->periodic_freq = 0x10;
+		break;
+	default:
+		ret = -ENOTSUPP;
+	}
+
+	if (ret == 0) {
+		rtc->periodic_freq |= tmp;
+		rtc->rtc_dev->irq_freq = freq;
+	}
+
+	spin_unlock_irq(&rtc->lock);
+	return ret;
+}
+
 static inline void sh_rtc_setaie(struct device *dev, unsigned int enable)
 {
 	struct sh_rtc *rtc = dev_get_drvdata(dev);
@@ -195,10 +247,9 @@ static inline void sh_rtc_setaie(struct device *dev, unsigned int enable)
 
 	tmp = readb(rtc->regbase + RCR1);
 
-	if (!enable) {
+	if (!enable)
 		tmp &= ~RCR1_AIE;
-		rtc->rearm_aie = 0;
-	} else if (rtc->rearm_aie == 0)
+	else
 		tmp |= RCR1_AIE;
 
 	writeb(tmp, rtc->regbase + RCR1);
@@ -206,62 +257,10 @@ static inline void sh_rtc_setaie(struct device *dev, unsigned int enable)
 	spin_unlock_irq(&rtc->lock);
 }
 
-static int sh_rtc_open(struct device *dev)
-{
-	struct sh_rtc *rtc = dev_get_drvdata(dev);
-	unsigned int tmp;
-	int ret;
-
-	tmp = readb(rtc->regbase + RCR1);
-	tmp &= ~RCR1_CF;
-	tmp |= RCR1_CIE;
-	writeb(tmp, rtc->regbase + RCR1);
-
-	ret = request_irq(rtc->periodic_irq, sh_rtc_periodic, IRQF_DISABLED,
-			  "sh-rtc period", dev);
-	if (unlikely(ret)) {
-		dev_err(dev, "request period IRQ failed with %d, IRQ %d\n",
-			ret, rtc->periodic_irq);
-		return ret;
-	}
-
-	ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, IRQF_DISABLED,
-			  "sh-rtc carry", dev);
-	if (unlikely(ret)) {
-		dev_err(dev, "request carry IRQ failed with %d, IRQ %d\n",
-			ret, rtc->carry_irq);
-		free_irq(rtc->periodic_irq, dev);
-		goto err_bad_carry;
-	}
-
-	ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED,
-			  "sh-rtc alarm", dev);
-	if (unlikely(ret)) {
-		dev_err(dev, "request alarm IRQ failed with %d, IRQ %d\n",
-			ret, rtc->alarm_irq);
-		goto err_bad_alarm;
-	}
-
-	return 0;
-
-err_bad_alarm:
-	free_irq(rtc->carry_irq, dev);
-err_bad_carry:
-	free_irq(rtc->periodic_irq, dev);
-
-	return ret;
-}
-
 static void sh_rtc_release(struct device *dev)
 {
-	struct sh_rtc *rtc = dev_get_drvdata(dev);
-
 	sh_rtc_setpie(dev, 0);
 	sh_rtc_setaie(dev, 0);
-
-	free_irq(rtc->periodic_irq, dev);
-	free_irq(rtc->carry_irq, dev);
-	free_irq(rtc->alarm_irq, dev);
 }
 
 static int sh_rtc_proc(struct device *dev, struct seq_file *seq)
@@ -270,31 +269,44 @@ static int sh_rtc_proc(struct device *dev, struct seq_file *seq)
 	unsigned int tmp;
 
 	tmp = readb(rtc->regbase + RCR1);
-	seq_printf(seq, "carry_IRQ\t: %s\n",
-		   (tmp & RCR1_CIE) ? "yes" : "no");
+	seq_printf(seq, "carry_IRQ\t: %s\n", (tmp & RCR1_CIE) ? "yes" : "no");
 
 	tmp = readb(rtc->regbase + RCR2);
 	seq_printf(seq, "periodic_IRQ\t: %s\n",
-		   (tmp & RCR2_PEF) ? "yes" : "no");
+		   (tmp & RCR2_PESMASK) ? "yes" : "no");
 
 	return 0;
 }
 
 static int sh_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
-	unsigned int ret = -ENOIOCTLCMD;
+	struct sh_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int ret = 0;
 
 	switch (cmd) {
 	case RTC_PIE_OFF:
 	case RTC_PIE_ON:
 		sh_rtc_setpie(dev, cmd == RTC_PIE_ON);
-		ret = 0;
 		break;
 	case RTC_AIE_OFF:
 	case RTC_AIE_ON:
 		sh_rtc_setaie(dev, cmd == RTC_AIE_ON);
-		ret = 0;
 		break;
+	case RTC_UIE_OFF:
+		rtc->periodic_freq &= ~PF_OXS;
+		break;
+	case RTC_UIE_ON:
+		rtc->periodic_freq |= PF_OXS;
+		break;
+	case RTC_IRQP_READ:
+		ret = put_user(rtc->rtc_dev->irq_freq,
+			       (unsigned long __user *)arg);
+		break;
+	case RTC_IRQP_SET:
+		ret = sh_rtc_setfreq(dev, arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
 	}
 
 	return ret;
@@ -421,7 +433,7 @@ static int sh_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_rtc *rtc = platform_get_drvdata(pdev);
-	struct rtc_time* tm = &wkalrm->time;
+	struct rtc_time *tm = &wkalrm->time;
 
 	spin_lock_irq(&rtc->lock);
 
@@ -452,7 +464,7 @@ static inline void sh_rtc_write_alarm_value(struct sh_rtc *rtc,
 		writeb(BIN2BCD(value) | AR_ENB,  rtc->regbase + reg_off);
 }
 
-static int sh_rtc_check_alarm(struct rtc_time* tm)
+static int sh_rtc_check_alarm(struct rtc_time *tm)
 {
 	/*
 	 * The original rtc says anything > 0xc0 is "don't care" or "match
@@ -503,11 +515,9 @@ static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 
 	/* disable alarm interrupt and clear the alarm flag */
 	rcr1 = readb(rtc->regbase + RCR1);
-	rcr1 &= ~(RCR1_AF|RCR1_AIE);
+	rcr1 &= ~(RCR1_AF | RCR1_AIE);
 	writeb(rcr1, rtc->regbase + RCR1);
 
-	rtc->rearm_aie = 0;
-
 	/* set alarm time */
 	sh_rtc_write_alarm_value(rtc, tm->tm_sec,  RSECAR);
 	sh_rtc_write_alarm_value(rtc, tm->tm_min,  RMINAR);
@@ -529,14 +539,34 @@ static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 	return 0;
 }
 
+static int sh_rtc_irq_set_state(struct device *dev, int enabled)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sh_rtc *rtc = platform_get_drvdata(pdev);
+
+	if (enabled) {
+		rtc->periodic_freq |= PF_KOU;
+		return sh_rtc_ioctl(dev, RTC_PIE_ON, 0);
+	} else {
+		rtc->periodic_freq &= ~PF_KOU;
+		return sh_rtc_ioctl(dev, RTC_PIE_OFF, 0);
+	}
+}
+
+static int sh_rtc_irq_set_freq(struct device *dev, int freq)
+{
+	return sh_rtc_ioctl(dev, RTC_IRQP_SET, freq);
+}
+
 static struct rtc_class_ops sh_rtc_ops = {
-	.open		= sh_rtc_open,
 	.release	= sh_rtc_release,
 	.ioctl		= sh_rtc_ioctl,
 	.read_time	= sh_rtc_read_time,
 	.set_time	= sh_rtc_set_time,
 	.read_alarm	= sh_rtc_read_alarm,
 	.set_alarm	= sh_rtc_set_alarm,
+	.irq_set_state	= sh_rtc_irq_set_state,
+	.irq_set_freq	= sh_rtc_irq_set_freq,
 	.proc		= sh_rtc_proc,
 };
 
@@ -544,6 +574,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 {
 	struct sh_rtc *rtc;
 	struct resource *res;
+	unsigned int tmp;
 	int ret = -ENOENT;
 
 	rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL);
@@ -552,6 +583,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&rtc->lock);
 
+	/* get periodic/carry/alarm irqs */
 	rtc->periodic_irq = platform_get_irq(pdev, 0);
 	if (unlikely(rtc->periodic_irq < 0)) {
 		dev_err(&pdev->dev, "No IRQ for period\n");
@@ -608,8 +640,48 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 		rtc->capabilities |= pinfo->capabilities;
 	}
 
+	rtc->rtc_dev->max_user_freq = 256;
+	rtc->rtc_dev->irq_freq = 1;
+	rtc->periodic_freq = 0x60;
+
 	platform_set_drvdata(pdev, rtc);
 
+	/* register periodic/carry/alarm irqs */
+	ret = request_irq(rtc->periodic_irq, sh_rtc_periodic, IRQF_DISABLED,
+			  "sh-rtc period", rtc);
+	if (unlikely(ret)) {
+		dev_err(&pdev->dev,
+			"request period IRQ failed with %d, IRQ %d\n", ret,
+			rtc->periodic_irq);
+		goto err_badmap;
+	}
+
+	ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, IRQF_DISABLED,
+			  "sh-rtc carry", rtc);
+	if (unlikely(ret)) {
+		dev_err(&pdev->dev,
+			"request carry IRQ failed with %d, IRQ %d\n", ret,
+			rtc->carry_irq);
+		free_irq(rtc->periodic_irq, rtc);
+		goto err_badmap;
+	}
+
+	ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED,
+			  "sh-rtc alarm", rtc);
+	if (unlikely(ret)) {
+		dev_err(&pdev->dev,
+			"request alarm IRQ failed with %d, IRQ %d\n", ret,
+			rtc->alarm_irq);
+		free_irq(rtc->carry_irq, rtc);
+		free_irq(rtc->periodic_irq, rtc);
+		goto err_badmap;
+	}
+
+	tmp = readb(rtc->regbase + RCR1);
+	tmp &= ~RCR1_CF;
+	tmp |= RCR1_CIE;
+	writeb(tmp, rtc->regbase + RCR1);
+
 	return 0;
 
 err_badmap:
@@ -630,6 +702,10 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev)
 	sh_rtc_setpie(&pdev->dev, 0);
 	sh_rtc_setaie(&pdev->dev, 0);
 
+	free_irq(rtc->carry_irq, rtc);
+	free_irq(rtc->periodic_irq, rtc);
+	free_irq(rtc->alarm_irq, rtc);
+
 	release_resource(rtc->res);
 
 	platform_set_drvdata(pdev, NULL);
@@ -662,6 +738,8 @@ module_exit(sh_rtc_exit);
 
 MODULE_DESCRIPTION("SuperH on-chip RTC driver");
 MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, Jamie Lenehan <lenehan@twibble.org>");
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, "
+	      "Jamie Lenehan <lenehan@twibble.org>, "
+	      "Angelo Castello <angelo.castello@st.com>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DRV_NAME);

From b9e393c2babb8b6956de52fc580b7c23f3629232 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 7 Mar 2008 17:19:58 +0900
Subject: [PATCH 05/27] sh: Create an sh debugfs root.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/setup.c     | 14 ++++++++++++++
 arch/sh/mm/cache-debugfs.c |  4 ++--
 arch/sh/mm/pmb.c           |  2 +-
 include/asm-sh/system.h    |  2 ++
 4 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index ff4f54a47c07..23bc707c2b03 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -23,6 +23,8 @@
 #include <linux/kexec.h>
 #include <linux/module.h>
 #include <linux/smp.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -443,3 +445,15 @@ const struct seq_operations cpuinfo_op = {
 	.show	= show_cpuinfo,
 };
 #endif /* CONFIG_PROC_FS */
+
+struct dentry *sh_debugfs_root;
+
+static int __init sh_debugfs_init(void)
+{
+	sh_debugfs_root = debugfs_create_dir("sh", NULL);
+	if (IS_ERR(sh_debugfs_root))
+		return PTR_ERR(sh_debugfs_root);
+
+	return 0;
+}
+arch_initcall(sh_debugfs_init);
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index db6d950b6f5e..c5b56d52b7d2 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -127,13 +127,13 @@ static int __init cache_debugfs_init(void)
 {
 	struct dentry *dcache_dentry, *icache_dentry;
 
-	dcache_dentry = debugfs_create_file("dcache", S_IRUSR, NULL,
+	dcache_dentry = debugfs_create_file("dcache", S_IRUSR, sh_debugfs_root,
 					    (unsigned int *)CACHE_TYPE_DCACHE,
 					    &cache_debugfs_fops);
 	if (IS_ERR(dcache_dentry))
 		return PTR_ERR(dcache_dentry);
 
-	icache_dentry = debugfs_create_file("icache", S_IRUSR, NULL,
+	icache_dentry = debugfs_create_file("icache", S_IRUSR, sh_debugfs_root,
 					    (unsigned int *)CACHE_TYPE_ICACHE,
 					    &cache_debugfs_fops);
 	if (IS_ERR(icache_dentry)) {
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index ab81c602295f..0b0ec6e04753 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -393,7 +393,7 @@ static int __init pmb_debugfs_init(void)
 	struct dentry *dentry;
 
 	dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO,
-				     NULL, NULL, &pmb_debugfs_fops);
+				     sh_debugfs_root, NULL, &pmb_debugfs_fops);
 	if (IS_ERR(dentry))
 		return PTR_ERR(dentry);
 
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
index 5145aa2a0ce9..e65b6b822cb3 100644
--- a/include/asm-sh/system.h
+++ b/include/asm-sh/system.h
@@ -146,6 +146,8 @@ extern unsigned int instruction_size(unsigned int insn);
 
 extern unsigned long cached_to_uncached;
 
+extern struct dentry *sh_debugfs_root;
+
 /* XXX
  * disable hlt during certain critical i/o operations
  */

From 2ad699080bbe3a88d17a1ff11e5575b76850174f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 13 Mar 2008 12:52:44 +0900
Subject: [PATCH 06/27] sh: Initial support for the MX-G CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                     |  11 +-
 arch/sh/Kconfig.debug               |  15 +--
 arch/sh/kernel/cpu/sh2a/Makefile    |   7 +-
 arch/sh/kernel/cpu/sh2a/probe.c     |   3 +
 arch/sh/kernel/cpu/sh2a/setup-mxg.c | 168 ++++++++++++++++++++++++++++
 arch/sh/kernel/setup.c              |   1 +
 include/asm-sh/bugs.h               |   2 +-
 include/asm-sh/processor.h          |   2 +-
 8 files changed, 195 insertions(+), 14 deletions(-)
 create mode 100644 arch/sh/kernel/cpu/sh2a/setup-mxg.c

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8d2cd1de5726..5b94cacc7d54 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -167,6 +167,12 @@ config CPU_SUBTYPE_SH7263
 	select CPU_SH2A
 	select CPU_HAS_FPU
 
+config CPU_SUBTYPE_MXG
+	bool "Support MX-G processor"
+	select CPU_SH2A
+	help
+	  Select MX-G if running on an R8A03022BG part.
+
 # SH-3 Processor Support
 
 config CPU_SUBTYPE_SH7705
@@ -560,7 +566,7 @@ config SH_TMU
 config SH_CMT
 	def_bool y
 	prompt "CMT timer support"
-	depends on CPU_SH2
+	depends on CPU_SH2 && !CPU_SUBTYPE_MXG
 	help
 	  This enables the use of the CMT as the system timer.
 
@@ -578,6 +584,7 @@ config SH_TIMER_IRQ
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
 	default "142" if CPU_SUBTYPE_SH7203
+	default "238" if CPU_SUBTYPE_MXG
 	default "16"
 
 config SH_PCLK_FREQ
@@ -588,7 +595,7 @@ config SH_PCLK_FREQ
 	default "33333333" if CPU_SUBTYPE_SH7770 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
-			      CPU_SUBTYPE_SH7263
+			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 5dcb74b947a9..d9d28f9dd0db 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -29,16 +29,17 @@ config EARLY_SCIF_CONSOLE
 config EARLY_SCIF_CONSOLE_PORT
 	hex
 	depends on EARLY_SCIF_CONSOLE
-	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
-	default "0xffe00000" if CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+	default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
+	default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
+	default "0xf8420000" if CPU_SUBTYPE_SH7619
+	default "0xff804000" if CPU_SUBTYPE_MXG
+	default "0xffc30000" if CPU_SUBTYPE_SHX3
+	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
+				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+	default "0xffe80000" if CPU_SH4
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
-	default "0xf8420000" if CPU_SUBTYPE_SH7619
-	default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
-	default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
-	default "0xffc30000" if CPU_SUBTYPE_SHX3
-	default "0xffe80000" if CPU_SH4
 	default "0x00000000"
 
 config EARLY_PRINTK
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index b279cdc3a233..7e2b90cfa7bf 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -8,6 +8,7 @@ common-y	+= $(addprefix ../sh2/, ex.o entry.o)
 
 obj-$(CONFIG_SH_FPU)	+= fpu.o
 
-obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7206)	+= setup-sh7206.o clock-sh7206.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7203)	+= setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7263)	+= setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_MXG)		+= setup-mxg.o clock-sh7206.o
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
index 6910e2664468..6e79132f6f30 100644
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ b/arch/sh/kernel/cpu/sh2a/probe.c
@@ -29,6 +29,9 @@ int __init detect_cpu_and_cache_system(void)
 	boot_cpu_data.type			= CPU_SH7206;
 	/* While SH7206 has a DSP.. */
 	boot_cpu_data.flags			|= CPU_HAS_DSP;
+#elif defined(CONFIG_CPU_SUBTYPE_MXG)
+	boot_cpu_data.type			= CPU_MXG;
+	boot_cpu_data.flags			|= CPU_HAS_DSP;
 #endif
 
 	boot_cpu_data.dcache.ways		= 4;
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
new file mode 100644
index 000000000000..e611d79fac4c
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -0,0 +1,168 @@
+/*
+ * Renesas MX-G (R8A03022BG) Setup
+ *
+ *  Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
+
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+
+	SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
+
+	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
+	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
+
+	MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
+	MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
+	MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
+	MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
+	MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
+	MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
+	MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
+
+	/* interrupt groups */
+	PINT, SCIF0, SCIF1,
+	MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+	INTC_IRQ(IRQ8, 72), INTC_IRQ(IRQ9, 73),
+	INTC_IRQ(IRQ10, 74), INTC_IRQ(IRQ11, 75),
+	INTC_IRQ(IRQ12, 76), INTC_IRQ(IRQ13, 77),
+	INTC_IRQ(IRQ14, 78), INTC_IRQ(IRQ15, 79),
+
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+
+	INTC_IRQ(SINT8, 94), INTC_IRQ(SINT7, 95),
+	INTC_IRQ(SINT6, 96), INTC_IRQ(SINT5, 97),
+	INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
+	INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
+
+	INTC_IRQ(SCIF0_RXI, 220), INTC_IRQ(SCIF0_TXI, 221),
+	INTC_IRQ(SCIF0_BRI, 222), INTC_IRQ(SCIF0_ERI, 223),
+	INTC_IRQ(SCIF1_RXI, 224), INTC_IRQ(SCIF1_TXI, 225),
+	INTC_IRQ(SCIF1_BRI, 226), INTC_IRQ(SCIF1_ERI, 227),
+
+	INTC_IRQ(MTU2_TGI0A, 228), INTC_IRQ(MTU2_TGI0B, 229),
+	INTC_IRQ(MTU2_TGI0C, 230), INTC_IRQ(MTU2_TGI0D, 231),
+	INTC_IRQ(MTU2_TCI0V, 232), INTC_IRQ(MTU2_TGI0E, 233),
+
+	INTC_IRQ(MTU2_TGI0F, 234), INTC_IRQ(MTU2_TGI1A, 235),
+	INTC_IRQ(MTU2_TGI1B, 236), INTC_IRQ(MTU2_TCI1V, 237),
+	INTC_IRQ(MTU2_TCI1U, 238), INTC_IRQ(MTU2_TGI2A, 239),
+
+	INTC_IRQ(MTU2_TGI2B, 240), INTC_IRQ(MTU2_TCI2V, 241),
+	INTC_IRQ(MTU2_TCI2U, 242), INTC_IRQ(MTU2_TGI3A, 243),
+
+	INTC_IRQ(MTU2_TGI3B, 244),
+	INTC_IRQ(MTU2_TGI3C, 245),
+
+	INTC_IRQ(MTU2_TGI3D, 246), INTC_IRQ(MTU2_TCI3V, 247),
+	INTC_IRQ(MTU2_TGI4A, 248), INTC_IRQ(MTU2_TGI4B, 249),
+	INTC_IRQ(MTU2_TGI4C, 250), INTC_IRQ(MTU2_TGI4D, 251),
+
+	INTC_IRQ(MTU2_TCI4V, 252), INTC_IRQ(MTU2_TGI5U, 253),
+	INTC_IRQ(MTU2_TGI5V, 254), INTC_IRQ(MTU2_TGI5W, 255),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+	INTC_GROUP(MTU2_GROUP1, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
+		   MTU2_TCI0V, MTU2_TGI0E),
+	INTC_GROUP(MTU2_GROUP2, MTU2_TGI0F, MTU2_TGI1A, MTU2_TGI1B,
+		   MTU2_TCI1V, MTU2_TCI1U, MTU2_TGI2A),
+	INTC_GROUP(MTU2_GROUP3, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
+		   MTU2_TGI3A),
+	INTC_GROUP(MTU2_GROUP4, MTU2_TGI3D, MTU2_TCI3V, MTU2_TGI4A,
+		   MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
+	INTC_GROUP(MTU2_GROUP5, MTU2_TCI4V, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
+	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
+	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffd9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffd941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffd941c, 0, 16, 4, /* IPR03 */ { IRQ8, IRQ9, IRQ10, IRQ11 } },
+	{ 0xfffd941e, 0, 16, 4, /* IPR04 */ { IRQ12, IRQ13, IRQ14, IRQ15 } },
+	{ 0xfffd9420, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
+	{ 0xfffd9800, 0, 16, 4, /* IPR06 */ { } },
+	{ 0xfffd9802, 0, 16, 4, /* IPR07 */ { } },
+	{ 0xfffd9804, 0, 16, 4, /* IPR08 */ { } },
+	{ 0xfffd9806, 0, 16, 4, /* IPR09 */ { } },
+	{ 0xfffd9808, 0, 16, 4, /* IPR10 */ { } },
+	{ 0xfffd980a, 0, 16, 4, /* IPR11 */ { } },
+	{ 0xfffd980c, 0, 16, 4, /* IPR12 */ { } },
+	{ 0xfffd980e, 0, 16, 4, /* IPR13 */ { } },
+	{ 0xfffd9810, 0, 16, 4, /* IPR14 */ { 0, 0, 0, SCIF0 } },
+	{ 0xfffd9812, 0, 16, 4, /* IPR15 */
+		{ SCIF1, MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3 } },
+	{ 0xfffd9814, 0, 16, 4, /* IPR16 */
+		{ MTU2_TGI3B, MTU2_TGI3C, MTU2_GROUP4, MTU2_GROUP5 } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffd9408, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xff804000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 223, 220, 221, 222 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *mxg_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init mxg_devices_setup(void)
+{
+	return platform_add_devices(mxg_devices,
+				    ARRAY_SIZE(mxg_devices));
+}
+__initcall(mxg_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 23bc707c2b03..0ee776888c65 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -335,6 +335,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
 	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
 	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
+	[CPU_MXG]	= "MX-G",
 	[CPU_SH7366]	= "SH7366",	[CPU_SH_NONE]	= "Unknown"
 };
 
diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h
index cfda7d5bf026..121b2ecddfc3 100644
--- a/include/asm-sh/bugs.h
+++ b/include/asm-sh/bugs.h
@@ -25,7 +25,7 @@ static void __init check_bugs(void)
 	case CPU_SH7619:
 		*p++ = '2';
 		break;
-	case CPU_SH7203 ... CPU_SH7263:
+	case CPU_SH7203 ... CPU_MXG:
 		*p++ = '2';
 		*p++ = 'a';
 		break;
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index ec707b98e5b9..f1b3a81191d4 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -16,7 +16,7 @@ enum cpu_type {
 	CPU_SH7619,
 
 	/* SH-2A types */
-	CPU_SH7203, CPU_SH7206, CPU_SH7263,
+	CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
 
 	/* SH-3 types */
 	CPU_SH7705, CPU_SH7706, CPU_SH7707,

From d391c6217d3214bd8278e1e3517ef57abbc4b317 Mon Sep 17 00:00:00 2001
From: Masayuki Hosokawa <hosokawa@ace-jp.com>
Date: Fri, 21 Mar 2008 13:38:00 +0900
Subject: [PATCH 07/27] sh: Hook up remaining IRQ sources for R7780MP FPGA.

Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/r7780rp/irq-r7780mp.c | 39 +++++++++++++-------
 include/asm-sh/r7780rp.h                     | 22 ++++++-----
 2 files changed, 38 insertions(+), 23 deletions(-)

diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
index 1f8f073f27be..68f0ad1b637d 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
@@ -18,31 +18,44 @@ enum {
 	UNUSED = 0,
 
 	/* board specific interrupt sources */
-	AX88796,          /* Ethernet controller */
-	CF,               /* Compact Flash */
-	PSW,              /* Push Switch */
-	EXT1,             /* EXT1n IRQ */
-	EXT4,             /* EXT4n IRQ */
+	CF,		/* Compact Flash */
+	TP,		/* Touch panel */
+	SCIF1,		/* FPGA SCIF1 */
+	SCIF0,		/* FPGA SCIF0 */
+	SMBUS,		/* SMBUS */
+	RTC,		/* RTC Alarm */
+	AX88796,	/* Ethernet controller */
+	PSW,		/* Push Switch */
+
+	/* external bus connector */
+	EXT1, EXT2, EXT4, EXT5, EXT6,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	INTC_IRQ(CF, IRQ_CF),
-	INTC_IRQ(PSW, IRQ_PSW),
+	INTC_IRQ(TP, IRQ_TP),
+	INTC_IRQ(SCIF1, IRQ_SCIF1),
+	INTC_IRQ(SCIF0, IRQ_SCIF0),
+	INTC_IRQ(SMBUS, IRQ_SMBUS),
+	INTC_IRQ(RTC, IRQ_RTC),
 	INTC_IRQ(AX88796, IRQ_AX88796),
-	INTC_IRQ(EXT1, IRQ_EXT1),
-	INTC_IRQ(EXT4, IRQ_EXT4),
+	INTC_IRQ(PSW, IRQ_PSW),
+
+	INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2),
+	INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
+	INTC_IRQ(EXT6, IRQ_EXT6),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
 	{ 0xa4000000, 0, 16, /* IRLMSK */
-	  { 0, 0, 0, 0, CF, 0, 0, 0,
-	    0, 0, 0, EXT4, 0, EXT1, PSW, AX88796 } },
+	  { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS,
+	    0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } },
 };
 
 static unsigned char irl2irq[HL_NR_IRL] __initdata = {
-	0, IRQ_CF, 0, 0,
-	0, 0, 0, 0,
-	0, IRQ_EXT4, 0, IRQ_EXT1,
+	0, IRQ_CF, IRQ_TP, IRQ_SCIF1,
+	IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6,
+	IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1,
 	0, IRQ_AX88796, IRQ_PSW,
 };
 
diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h
index 1770460a4616..a33838f23a6d 100644
--- a/include/asm-sh/r7780rp.h
+++ b/include/asm-sh/r7780rp.h
@@ -55,11 +55,11 @@
 #define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
 #define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
 #define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_ICCR         (PA_BCR+0x0600) /* Serial control */
-#define PA_SAR          (PA_BCR+0x0602) /* Serial Slave control */
-#define PA_MDR          (PA_BCR+0x0604) /* Serial Mode control */
-#define PA_ADR1         (PA_BCR+0x0606) /* Serial Address1 control */
-#define PA_DAR1         (PA_BCR+0x0646) /* Serial Data1 control */
+#define PA_SMCR         (PA_BCR+0x0600) /* 2-wire Serial control */
+#define PA_SMSMADR      (PA_BCR+0x0602) /* 2-wire Serial Slave control */
+#define PA_SMMR         (PA_BCR+0x0604) /* 2-wire Serial Mode control */
+#define PA_SMSADR1      (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
+#define PA_SMTRDR1      (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
 #define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
 #define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
 #define PA_PMR          (PA_BCR+0x0900) /*  */
@@ -107,11 +107,11 @@
 #define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
 #define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
 #define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
-#define PA_ICCR		(PA_BCR+0x0500)	/* Serial control */
-#define PA_SAR		(PA_BCR+0x0502)	/* Serial Slave control */
-#define PA_MDR		(PA_BCR+0x0504)	/* Serial Mode control */
-#define PA_ADR1		(PA_BCR+0x0506)	/* Serial Address1 control */
-#define PA_DAR1		(PA_BCR+0x0546)	/* Serial Data1 control */
+#define PA_SMCR		(PA_BCR+0x0500)	/* 2-wire Serial control */
+#define PA_SMSMADR	(PA_BCR+0x0502)	/* 2-wire Serial Slave control */
+#define PA_SMMR		(PA_BCR+0x0504)	/* 2-wire Serial Mode control */
+#define PA_SMSADR1	(PA_BCR+0x0506)	/* 2-wire Serial Address1 control */
+#define PA_SMTRDR1	(PA_BCR+0x0546)	/* 2-wire Serial Data1 control */
 #define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
 
 #define PA_AX88796L	0xa5800400	/* AX88796L Area */
@@ -190,6 +190,8 @@
 #define IRQ_TP			(HL_FPGA_IRQ_BASE + 12)
 #define IRQ_RTC			(HL_FPGA_IRQ_BASE + 13)
 #define IRQ_TH_ALERT		(HL_FPGA_IRQ_BASE + 14)
+#define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
+#define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
 
 unsigned char *highlander_init_irq_r7780mp(void);
 unsigned char *highlander_init_irq_r7780rp(void);

From 6e862995a07629858bfa16e0991a258de35007f3 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Fri, 21 Mar 2008 15:54:13 +0900
Subject: [PATCH 08/27] sh: Add support for Solution Engine SH7721 board

Add support for Solution Engine SH7721 board(MS7721RP01).

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                  |    8 +
 arch/sh/Makefile                 |    1 +
 arch/sh/boards/se/7721/Makefile  |    1 +
 arch/sh/boards/se/7721/irq.c     |   45 ++
 arch/sh/boards/se/7721/setup.c   |   99 +++
 arch/sh/configs/se7721_defconfig | 1085 ++++++++++++++++++++++++++++++
 arch/sh/kernel/cf-enabler.c      |   15 +-
 arch/sh/tools/mach-types         |    1 +
 include/asm-sh/se7721.h          |   70 ++
 9 files changed, 1319 insertions(+), 6 deletions(-)
 create mode 100644 arch/sh/boards/se/7721/Makefile
 create mode 100644 arch/sh/boards/se/7721/irq.c
 create mode 100644 arch/sh/boards/se/7721/setup.c
 create mode 100644 arch/sh/configs/se7721_defconfig
 create mode 100644 include/asm-sh/se7721.h

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 5b94cacc7d54..df2e2f99b902 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -372,6 +372,14 @@ config SH_7619_SOLUTION_ENGINE
 	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 	  evaluation board.
 	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
 config SH_7722_SOLUTION_ENGINE
 	bool "SolutionEngine7722"
 	select SOLUTION_ENGINE
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index cffc92b1bf2e..bb06f83e6239 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -107,6 +107,7 @@ machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
 machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
+machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
 machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
 machdir-$(CONFIG_SH_MPC1211)			+= mpc1211
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/se/7721/Makefile
new file mode 100644
index 000000000000..7f09030980b3
--- /dev/null
+++ b/arch/sh/boards/se/7721/Makefile
@@ -0,0 +1 @@
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/se/7721/irq.c
new file mode 100644
index 000000000000..c4fdd622bf8b
--- /dev/null
+++ b/arch/sh/boards/se/7721/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <asm/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/se/7721/setup.c
new file mode 100644
index 000000000000..1be3e92752f7
--- /dev/null
+++ b/arch/sh/boards/se/7721/setup.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/se7721.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	return platform_add_devices(se7721_devices,
+		ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
+	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
+	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
+	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_nr_irqs		= 109,
+	.mv_init_irq		= init_se7721_IRQ,
+};
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
new file mode 100644
index 000000000000..f3d4ca0caa46
--- /dev/null
+++ b/arch/sh/configs/se7721_defconfig
@@ -0,0 +1,1085 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc5
+# Fri Mar 21 12:05:31 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+CONFIG_CPU_SUBTYPE_SH7721=y
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_ADC is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7721_SOLUTION_ENGINE=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
+
+#
+# Bus options
+#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_SCH_DSMARK=y
+CONFIG_NET_SCH_NETEM=y
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=y
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 1c3b99642e1c..01ff4d05aab0 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -83,6 +83,8 @@ static int __init cf_init_default(void)
 #include <asm/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
 #include <asm/se7722.h>
+#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
+#include <asm/se7721.h>
 #endif
 
 /*
@@ -99,7 +101,9 @@ static int __init cf_init_default(void)
  * 0xB0600000 : I/O
  */
 
-#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE) 
+#if defined(CONFIG_SH_SOLUTION_ENGINE) || \
+    defined(CONFIG_SH_7722_SOLUTION_ENGINE) || \
+    defined(CONFIG_SH_7721_SOLUTION_ENGINE)
 static int __init cf_init_se(void)
 {
 	if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
@@ -112,7 +116,7 @@ static int __init cf_init_se(void)
 	}
 
 	/*
-	 *  PC-Card window open 
+	 *  PC-Card window open
 	 *  flag == COMMON/ATTRIBUTE/IO
 	 */
 	/* common window open */
@@ -122,7 +126,7 @@ static int __init cf_init_se(void)
 		ctrl_outw(0x0b00, MRSHPC_MW0CR2);
 	else
 		/* common mode & bus width 16bit SWAP = 0*/
-		ctrl_outw(0x0300, MRSHPC_MW0CR2); 
+		ctrl_outw(0x0300, MRSHPC_MW0CR2);
 
 	/* attribute window open */
 	ctrl_outw(0x8a85, MRSHPC_MW1CR1);
@@ -155,10 +159,9 @@ static int __init cf_init_se(void)
 
 int __init cf_init(void)
 {
-	if( mach_is_se() || mach_is_7722se() ){
+	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
 		return cf_init_se();
-	}
-	
+
 	return cf_init_default();
 }
 
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index d63b93da952d..b9f6d74dcbe8 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -21,6 +21,7 @@ HD64465			HD64465
 7206SE			SH_7206_SOLUTION_ENGINE
 7343SE			SH_7343_SOLUTION_ENGINE
 7619SE			SH_7619_SOLUTION_ENGINE
+7721SE			SH_7721_SOLUTION_ENGINE		
 7722SE			SH_7722_SOLUTION_ENGINE		
 7751SE			SH_7751_SOLUTION_ENGINE		
 7780SE			SH_7780_SOLUTION_ENGINE
diff --git a/include/asm-sh/se7721.h b/include/asm-sh/se7721.h
new file mode 100644
index 000000000000..b957f6041193
--- /dev/null
+++ b/include/asm-sh/se7721.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef __ASM_SH_SE7721_H
+#define __ASM_SH_SE7721_H
+#include <asm/addrspace.h>
+
+/* Box specific addresses. */
+#define SE_AREA0_WIDTH	2		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM	0xaC000000	/* SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+
+#define PA_PERIPHERAL	0xB8000000
+
+#define PA_PCIC		PA_PERIPHERAL
+#define PA_MRSHPC	(PA_PERIPHERAL + 0x003fffe0)
+#define PA_MRSHPC_MW1	(PA_PERIPHERAL + 0x00400000)
+#define PA_MRSHPC_MW2	(PA_PERIPHERAL + 0x00500000)
+#define PA_MRSHPC_IO	(PA_PERIPHERAL + 0x00600000)
+#define MRSHPC_OPTION	(PA_MRSHPC + 6)
+#define MRSHPC_CSR	(PA_MRSHPC + 8)
+#define MRSHPC_ISR	(PA_MRSHPC + 10)
+#define MRSHPC_ICR	(PA_MRSHPC + 12)
+#define MRSHPC_CPWCR	(PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1	(PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1	(PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1	(PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2	(PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2	(PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2	(PA_MRSHPC + 26)
+#define MRSHPC_CDCR	(PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO	(PA_MRSHPC + 30)
+
+#define PA_LED		0xB6800000	/* 8bit LED */
+#define PA_FPGA		0xB7000000 	/* FPGA base address */
+
+#define MRSHPC_IRQ0	10
+
+#define FPGA_ILSR1	(PA_FPGA + 0x02)
+#define FPGA_ILSR2	(PA_FPGA + 0x03)
+#define FPGA_ILSR3	(PA_FPGA + 0x04)
+#define FPGA_ILSR4	(PA_FPGA + 0x05)
+#define FPGA_ILSR5	(PA_FPGA + 0x06)
+#define FPGA_ILSR6	(PA_FPGA + 0x07)
+#define FPGA_ILSR7	(PA_FPGA + 0x08)
+#define FPGA_ILSR8	(PA_FPGA + 0x09)
+
+void init_se7721_IRQ(void);
+
+#define __IO_PREFIX		se7721
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7721_H */

From 2163b4cb01cd79cd1291696fc4636740026d61cb Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 21 Mar 2008 18:05:47 +0900
Subject: [PATCH 09/27] sh: Hook up the rest of the SH7770 serial ports.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 37 +++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index b9cec48b1808..b73578ee295d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -1,7 +1,7 @@
 /*
  * SH7770 Setup
  *
- *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -28,6 +28,41 @@ static struct plat_sci_port sci_platform_data[] = {
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
 		.irqs		= { 63, 63, 63, 63 },
+	}, {
+		.mapbase	= 0xff926000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 64, 64, 64, 64 },
+	}, {
+		.mapbase	= 0xff927000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 65, 65, 65, 65 },
+	}, {
+		.mapbase	= 0xff928000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 66, 66, 66, 66 },
+	}, {
+		.mapbase	= 0xff929000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 67, 67, 67, 67 },
+	}, {
+		.mapbase	= 0xff92a000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 68, 68, 68, 68 },
+	}, {
+		.mapbase	= 0xff92b000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 69, 69, 69, 69 },
+	}, {
+		.mapbase	= 0xff92c000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 70, 70, 70, 70 },
 	}, {
 		.flags = 0,
 	}

From 5c0cbd74bb56aeb7f3de883ab79c5f501622ccb1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 21 Mar 2008 18:07:04 +0900
Subject: [PATCH 10/27] sh: Allow optimized clear/copy page routines to be used
 on SH-2.

Presently these are restricted to SH-3 and SH-4, so we reorder the
ifdefs a bit to let other parts use these also.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/lib/clear_page.S | 6 +++---
 arch/sh/lib/copy_page.S  | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/sh/lib/clear_page.S b/arch/sh/lib/clear_page.S
index 3539123fe517..8342bfbde64c 100644
--- a/arch/sh/lib/clear_page.S
+++ b/arch/sh/lib/clear_page.S
@@ -27,11 +27,11 @@ ENTRY(clear_page)
 	mov	#0,r0
 	!
 1:
-#if defined(CONFIG_CPU_SH3)
-	mov.l	r0,@r4
-#elif defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
 	movca.l	r0,@r4
 	mov	r4,r1
+#else
+	mov.l	r0,@r4
 #endif
 	add	#32,r4
 	mov.l	r0,@-r4
diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S
index e002b91c8752..5d12e657be34 100644
--- a/arch/sh/lib/copy_page.S
+++ b/arch/sh/lib/copy_page.S
@@ -41,11 +41,11 @@ ENTRY(copy_page)
 	mov.l	@r11+,r5
 	mov.l	@r11+,r6
 	mov.l	@r11+,r7
-#if defined(CONFIG_CPU_SH3)
-	mov.l	r0,@r10
-#elif defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
 	movca.l	r0,@r10
 	mov	r10,r0
+#else
+	mov.l	r0,@r10
 #endif
 	add	#32,r10
 	mov.l	r7,@-r10

From 9460c0ce9b29825d279081d5078815a32c268ada Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 21 Mar 2008 18:08:58 +0900
Subject: [PATCH 11/27] sh: Fix up __access_ok() check for nommu.

Presently this only checks to see if an address is an RAM, but this
doesn't work with XIP, so just always return 1. Follows m68knommu.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 include/asm-sh/uaccess_32.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h
index c0318b608893..1e41fda74bd3 100644
--- a/include/asm-sh/uaccess_32.h
+++ b/include/asm-sh/uaccess_32.h
@@ -55,13 +55,10 @@ static inline void set_fs(mm_segment_t s)
  * If we don't have an MMU (or if its disabled) the only thing we really have
  * to look out for is if the address resides somewhere outside of what
  * available RAM we have.
- *
- * TODO: This check could probably also stand to be restricted somewhat more..
- * though it still does the Right Thing(tm) for the time being.
  */
 static inline int __access_ok(unsigned long addr, unsigned long size)
 {
-	return ((addr >= memory_start) && ((addr + size) < memory_end));
+	return 1;
 }
 #else /* CONFIG_MMU */
 #define __addr_ok(addr) \

From 6dea7814e1c6a27701a63b271fc580791e066537 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Fri, 21 Mar 2008 20:14:46 +0900
Subject: [PATCH 12/27] Fix sh_keysc double free

Avoid double free situation from happening by removing input_free_device()
after input_unregister_device(). Suggested by Dmitry Torokhov.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/input/keyboard/sh_keysc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 5d0864a9e94b..8486abc457ed 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -238,7 +238,6 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev)
 
 	input_unregister_device(priv->input);
 	free_irq(platform_get_irq(pdev, 0), pdev);
-	input_free_device(priv->input);
 	iounmap(priv->iomem_base);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

From 9db913c3a62a66517def9cb973bbaa45a2739018 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Fri, 21 Mar 2008 18:43:19 +0900
Subject: [PATCH 13/27] sh: Add MigoR header file

This patch adds a MigoR specific header file. We may want to use a cpu
specific header file instead, but this will do for now.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/migor/setup.c |  9 +----
 include/asm-sh/migor.h               | 58 ++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 8 deletions(-)
 create mode 100644 include/asm-sh/migor.h

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 8a6ee842624f..aa79fc87a721 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -14,6 +14,7 @@
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
+#include <asm/migor.h>
 
 /* Address     IRQ  Size  Bus  Description
  * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
@@ -87,14 +88,6 @@ static int __init migor_devices_setup(void)
 }
 __initcall(migor_devices_setup);
 
-#define PORT_PJCR       0xA4050110UL
-#define PORT_PSELA      0xA405014EUL
-#define PORT_PYCR       0xA405014AUL
-#define PORT_PZCR       0xA405014CUL
-#define PORT_HIZCRA     0xA4050158UL
-#define PORT_HIZCRC     0xA405015CUL
-#define MSTPCR2         0xA4150038UL
-
 static void __init migor_setup(char **cmdline_p)
 {
 	/* SMC91C111 - Enable IRQ0 */
diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h
new file mode 100644
index 000000000000..2329363afdc3
--- /dev/null
+++ b/include/asm-sh/migor.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+/*
+ * linux/include/asm-sh/migor.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ *
+ * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* GPIO */
+#define MSTPCR0 0xa4150030
+#define MSTPCR1 0xa4150034
+#define MSTPCR2 0xa4150038
+
+#define PORT_PACR 0xa4050100
+#define PORT_PDCR 0xa4050106
+#define PORT_PECR 0xa4050108
+#define PORT_PHCR 0xa405010e
+#define PORT_PJCR 0xa4050110
+#define PORT_PKCR 0xa4050112
+#define PORT_PLCR 0xa4050114
+#define PORT_PMCR 0xa4050116
+#define PORT_PRCR 0xa405011c
+#define PORT_PWCR 0xa4050146
+#define PORT_PXCR 0xa4050148
+#define PORT_PYCR 0xa405014a
+#define PORT_PZCR 0xa405014c
+#define PORT_PADR 0xa4050120
+#define PORT_PWDR 0xa4050166
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRC 0xa405015c
+
+#define PORT_MSELCRB 0xa4050182
+
+#define MSTPCR1 0xa4150034
+#define MSTPCR2 0xa4150038
+
+#define PORT_PSELA 0xa405014e
+#define PORT_PSELB 0xa4050150
+#define PORT_PSELC 0xa4050152
+#define PORT_PSELD 0xa4050154
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRB 0xa405015a
+#define PORT_HIZCRC 0xa405015c
+
+#define BSC_CS6ABCR 0xfec1001c
+
+#endif /* __ASM_SH_MIGOR_H */

From a0d29798e568116aa6c32aef7bab2d9e620c88ad Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Fri, 21 Mar 2008 18:43:28 +0900
Subject: [PATCH 14/27] sh: Use physical addresses for sh7722 USBF resources

Use physical addresses and change resource name to follow data sheet.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index b98b4bc93ec9..a6929fa59c35 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -16,13 +16,12 @@
 
 static struct resource usbf_resources[] = {
 	[0] = {
-		.name	= "m66592_udc",
-		.start	= 0xA4480000,
-		.end	= 0xA44800FF,
+		.name	= "USBF",
+		.start	= 0x04480000,
+		.end	= 0x044800FF,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.name	= "m66592_udc",
 		.start	= 65,
 		.end	= 65,
 		.flags	= IORESOURCE_IRQ,

From b026a23c07d1bf21188c57e90118782c58db6061 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Fri, 21 Mar 2008 18:43:46 +0900
Subject: [PATCH 15/27] sh: Use phyical addresses for MigoR smc91x resources

Use physical addresses and change resource name of MigoR ethernet chip.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/migor/setup.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index aa79fc87a721..21df385deb74 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -26,9 +26,9 @@
 
 static struct resource smc91x_eth_resources[] = {
 	[0] = {
-		.name   = "smc91x-regs" ,
-		.start  = P2SEGADDR(0x10000300),
-		.end    = P2SEGADDR(0x1000030f),
+		.name   = "SMC91C111" ,
+		.start  = 0x10000300,
+		.end    = 0x1000030f,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {

From c2933965de89a60688d51c810d535c1f2cce8448 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 25 Mar 2008 16:49:30 +0900
Subject: [PATCH 16/27] sh: r7780rp: Hook up the I2C and SMBus platform
 devices.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/r7780rp/setup.c | 42 ++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 3 deletions(-)

diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 2f68bea7890c..a5c5e9236501 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -4,7 +4,7 @@
  * Renesas Solutions Highlander Support.
  *
  * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005 - 2007 Paul Mundt
+ * Copyright (C) 2005 - 2008 Paul Mundt
  *
  * This contains support for the R7780RP-1, R7780MP, and R7785RP
  * Highlander modules.
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/types.h>
+#include <linux/i2c.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <asm/r7780rp.h>
@@ -176,11 +177,38 @@ static struct platform_device ax88796_device = {
 	.resource       = ax88796_resources,
 };
 
+static struct resource smbus_resources[] = {
+	[0] = {
+		.start	= PA_SMCR,
+		.end	= PA_SMCR + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SMBUS,
+		.end	= IRQ_SMBUS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smbus_device = {
+	.name		= "i2c-highlander",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smbus_resources),
+	.resource	= smbus_resources,
+};
+
+static struct i2c_board_info __initdata highlander_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+		.type	= "r2025sd",
+	},
+};
 
 static struct platform_device *r7780rp_devices[] __initdata = {
 	&r8a66597_usb_host_device,
 	&m66592_usb_peripheral_device,
 	&heartbeat_device,
+	&smbus_device,
 #ifndef CONFIG_SH_R7780RP
 	&ax88796_device,
 #endif
@@ -199,12 +227,20 @@ static struct trapped_io cf_trapped_io = {
 
 static int __init r7780rp_devices_setup(void)
 {
+	int ret = 0;
+
 #ifndef CONFIG_SH_R7780RP
 	if (register_trapped_io(&cf_trapped_io) == 0)
-		platform_device_register(&cf_ide_device);
+		ret |= platform_device_register(&cf_ide_device);
 #endif
-	return platform_add_devices(r7780rp_devices,
+
+	ret |= platform_add_devices(r7780rp_devices,
 				    ARRAY_SIZE(r7780rp_devices));
+
+	ret |= i2c_register_board_info(0, highlander_i2c_devices,
+				       ARRAY_SIZE(highlander_i2c_devices));
+
+	return ret;
 }
 device_initcall(r7780rp_devices_setup);
 

From 8ed6dfdd0900dfd6ddc7ba3c766a80f7b88911c9 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 25 Mar 2008 16:49:53 +0900
Subject: [PATCH 17/27] sh: Fix up mach-types formatting from merge damage.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/tools/mach-types | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index b9f6d74dcbe8..987c6682bf99 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -21,9 +21,9 @@ HD64465			HD64465
 7206SE			SH_7206_SOLUTION_ENGINE
 7343SE			SH_7343_SOLUTION_ENGINE
 7619SE			SH_7619_SOLUTION_ENGINE
-7721SE			SH_7721_SOLUTION_ENGINE		
-7722SE			SH_7722_SOLUTION_ENGINE		
-7751SE			SH_7751_SOLUTION_ENGINE		
+7721SE			SH_7721_SOLUTION_ENGINE
+7722SE			SH_7722_SOLUTION_ENGINE
+7751SE			SH_7751_SOLUTION_ENGINE
 7780SE			SH_7780_SOLUTION_ENGINE
 7751SYSTEMH		SH_7751_SYSTEMH
 HP6XX			SH_HP6XX

From b8808786e85a71afb1a169b5f059666c666f08d8 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Fri, 21 Mar 2008 18:43:55 +0900
Subject: [PATCH 18/27] sh: MigoR NOR flash support using physmap-flash

Add NOR flash support to the MigoR board by giving board specific data
to the physmap-flash platform driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/migor/setup.c | 46 ++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 21df385deb74..44d9b5675ec9 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/mtd/physmap.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
@@ -77,9 +78,54 @@ static struct platform_device sh_keysc_device = {
 	},
 };
 
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "rootfs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (15 * 1024 * 1024),
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+	.width		= 2,
+	.parts		= migor_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device migor_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= migor_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nor_flash_data,
+	},
+};
+
 static struct platform_device *migor_devices[] __initdata = {
 	&smc91x_eth_device,
 	&sh_keysc_device,
+	&migor_nor_flash_device,
 };
 
 static int __init migor_devices_setup(void)

From 3c803a9a676c30e87b49f9cfcfd29713bc438552 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Fri, 21 Mar 2008 18:44:04 +0900
Subject: [PATCH 19/27] sh: MigoR NAND flash support using gen_flash

Add NAND flash support to the MigoR board by giving board specific data
to the gen_nand platform driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/migor/setup.c | 73 ++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 44d9b5675ec9..bc7a4cec1277 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
@@ -122,10 +123,77 @@ static struct platform_device migor_nor_flash_device = {
 	},
 };
 
+static struct mtd_partition migor_nand_flash_partitions[] = {
+	{
+		.name		= "nanddata1",
+		.offset		= 0x0,
+		.size		= 512 * 1024 * 1024,
+	},
+	{
+		.name		= "nanddata2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024 * 1024,
+	},
+};
+
+static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
+				     unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
+	else
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct mtd_info *mtd)
+{
+	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
+}
+
+struct platform_nand_data migor_nand_flash_data = {
+	.chip = {
+		.nr_chips = 1,
+		.partitions = migor_nand_flash_partitions,
+		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+		.chip_delay = 20,
+		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
+	},
+	.ctrl = {
+		.dev_ready = migor_nand_flash_ready,
+		.cmd_ctrl = migor_nand_flash_cmd_ctl,
+	},
+};
+
+static struct resource migor_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x18000000,
+		.end		= 0x18ffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_nand_flash_device = {
+	.name		= "gen_nand",
+	.resource	= migor_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nand_flash_data,
+	}
+};
+
 static struct platform_device *migor_devices[] __initdata = {
 	&smc91x_eth_device,
 	&sh_keysc_device,
 	&migor_nor_flash_device,
+	&migor_nand_flash_device,
 };
 
 static int __init migor_devices_setup(void)
@@ -146,6 +214,11 @@ static void __init migor_setup(char **cmdline_p)
 	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
 	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
 	ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
+
+	/* NAND Flash */
+	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
+	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
+		  BSC_CS6ABCR);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {

From ef1b2327d27901596d896820722bb2cefa2d1f64 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Tue, 25 Mar 2008 17:14:03 +0900
Subject: [PATCH 20/27] sh: Add I2C platform data to sh7722

Add platform data for the SuperH Mobile I2C block to sh7722.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index a6929fa59c35..069314037049 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -39,6 +39,26 @@ static struct platform_device usbf_device = {
 	.resource	= usbf_resources,
 };
 
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -73,6 +93,7 @@ static struct platform_device sci_device = {
 
 static struct platform_device *sh7722_devices[] __initdata = {
 	&usbf_device,
+	&iic_device,
 	&sci_device,
 };
 

From 0c6111ecccb33b1a7d79b6daf64c0cc4391ff3fa Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Tue, 25 Mar 2008 17:20:24 +0900
Subject: [PATCH 21/27] sh: Add I2C support to MigoR

Enable the sh7722 I2C controller on the MigoR board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/migor/setup.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index bc7a4cec1277..ac8d4151dc8a 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -13,6 +13,7 @@
 #include <linux/input.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
+#include <linux/i2c.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
@@ -196,8 +197,14 @@ static struct platform_device *migor_devices[] __initdata = {
 	&migor_nand_flash_device,
 };
 
+static struct i2c_board_info __initdata migor_i2c_devices[] = {
+};
+
 static int __init migor_devices_setup(void)
 {
+	i2c_register_board_info(0, migor_i2c_devices,
+				ARRAY_SIZE(migor_i2c_devices));
+ 
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
@@ -219,6 +226,9 @@ static void __init migor_setup(char **cmdline_p)
 	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
 	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
 		  BSC_CS6ABCR);
+
+	/* I2C */
+	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {

From 577958671eadf5ab1deed66f99cdbe67b502ea66 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Tue, 25 Mar 2008 17:24:31 +0900
Subject: [PATCH 22/27] sh: Add rs5c732b RTC support to MigoR

Add support for the rs5c372b RTC chip to MigoR.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/migor/setup.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index ac8d4151dc8a..ebef8a8bbdb3 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -198,6 +198,10 @@ static struct platform_device *migor_devices[] __initdata = {
 };
 
 static struct i2c_board_info __initdata migor_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+		.type   = "rs5c372b",
+	},
 };
 
 static int __init migor_devices_setup(void)

From 67908abf02fb83dee1730adf70d9e31367119190 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Tue, 25 Mar 2008 17:30:45 +0900
Subject: [PATCH 23/27] sh: Add migor_ts support to MigoR

Add support for the migor_ts touch panel to the MigoR board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/renesas/migor/setup.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index ebef8a8bbdb3..00d52a20d8a5 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -202,6 +202,10 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = {
 		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
 		.type   = "rs5c372b",
 	},
+	{
+		I2C_BOARD_INFO("migor_ts", 0x51),
+		.irq = 38, /* IRQ6 */
+	},
 };
 
 static int __init migor_devices_setup(void)
@@ -233,6 +237,11 @@ static void __init migor_setup(char **cmdline_p)
 
 	/* I2C */
 	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
+
+	/* Touch Panel - Enable IRQ6 */
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
+	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
+	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {

From 47aa8f493f94c6f60ebc5aa70eec90cc83f499f3 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 9 Apr 2008 17:53:11 +0900
Subject: [PATCH 24/27] sh: Fix up SH7763 build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index 07c988dc9de6..ae2b22219f02 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -231,12 +231,6 @@ static struct intc_group groups[] __initdata = {
 	INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3),
 };
 
-static struct intc_prio priorities[] __initdata = {
-	INTC_PRIO(SCIF0, 3),
-	INTC_PRIO(SCIF1, 3),
-	INTC_PRIO(SCIF2, 3),
-};
-
 static struct intc_mask_reg mask_registers[] __initdata = {
 	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
 	  { 0, 0, 0, 0, 0, 0, GPIO, 0,
@@ -270,11 +264,10 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups, priorities,
+static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
 /* Support for external interrupt pins in IRQ mode */
-
 static struct intc_vect irq_vectors[] __initdata = {
 	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
 	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
@@ -302,7 +295,6 @@ static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
 			 irq_sense_registers);
 
 /* External interrupt pins in IRL mode */
-
 static struct intc_vect irl_vectors[] __initdata = {
 	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
 	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),

From 178dd0cd28168287a0be6444a7eef8918b6c544e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 9 Apr 2008 17:56:18 +0900
Subject: [PATCH 25/27] sh: Add support for SH7723 CPU subtype.

This adds basic support for the SH7723 MobileR2 CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                        |  11 +-
 arch/sh/kernel/cpu/sh4/probe.c         |  25 ++-
 arch/sh/kernel/cpu/sh4a/Makefile       |   2 +
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 300 +++++++++++++++++++++++++
 arch/sh/kernel/setup.c                 |   2 +-
 drivers/serial/sh-sci.c                |   7 +-
 drivers/serial/sh-sci.h                |  60 +++--
 include/asm-sh/cpu-sh4/freq.h          |   6 +-
 include/asm-sh/cpu-sh4/rtc.h           |   5 +
 include/asm-sh/processor.h             |   3 +-
 10 files changed, 389 insertions(+), 32 deletions(-)
 create mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7723.c

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index df2e2f99b902..6a679c3e15e8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -276,6 +276,15 @@ config CPU_SUBTYPE_SH4_202
 
 # SH-4A Processor Support
 
+config CPU_SUBTYPE_SH7723
+	bool "Support SH7723 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+	help
+	  Select SH7723 if you have an SH-MobileR2 CPU.
+
 config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
@@ -600,7 +609,7 @@ config SH_PCLK_FREQ
 	default "27000000" if CPU_SUBTYPE_SH7343
 	default "31250000" if CPU_SUBTYPE_SH7619
 	default "32000000" if CPU_SUBTYPE_SH7722
-	default "33333333" if CPU_SUBTYPE_SH7770 || \
+	default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
 			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 9e89984c4f1d..c478b16dbf4b 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -126,17 +126,22 @@ int __init detect_cpu_and_cache_system(void)
 					  CPU_HAS_LLSC;
 		break;
 	case 0x3008:
-		if (prr == 0xa0 || prr == 0xa1) {
-			boot_cpu_data.type = CPU_SH7722;
-			boot_cpu_data.icache.ways = 4;
-			boot_cpu_data.dcache.ways = 4;
-			boot_cpu_data.flags |= CPU_HAS_LLSC;
-		}
-		else if (prr == 0x70) {
+		boot_cpu_data.icache.ways = 4;
+		boot_cpu_data.dcache.ways = 4;
+		boot_cpu_data.flags |= CPU_HAS_LLSC;
+
+		switch (prr) {
+		case 0x50:
+			boot_cpu_data.type = CPU_SH7723;
+			boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
+			break;
+		case 0x70:
 			boot_cpu_data.type = CPU_SH7366;
-			boot_cpu_data.icache.ways = 4;
-			boot_cpu_data.dcache.ways = 4;
-			boot_cpu_data.flags |= CPU_HAS_LLSC;
+			break;
+		case 0xa0:
+		case 0xa1:
+			boot_cpu_data.type = CPU_SH7722;
+			break;
 		}
 		break;
 	case 0x4000:	/* 1st cut */
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 5d890ac8e793..a880e7968750 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7723)	+= setup-sh7723.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o
 obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
@@ -22,6 +23,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
new file mode 100644
index 000000000000..16925cf28db8
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -0,0 +1,300 @@
+/*
+ * SH7723 Setup
+ *
+ *  Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/serial_sci.h>
+#include <asm/mmzone.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xa4e30000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 56, 56, 56, 56 },
+	},{
+		.mapbase	= 0xa4e40000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 88, 88, 88, 88 },
+	},{
+		.mapbase	= 0xa4e50000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 109, 109, 109, 109 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa465fec0,
+		.end	= 0xa465fec0 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= 69,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= 70,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= 68,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct platform_device *sh7723_devices[] __initdata = {
+	&sci_device,
+	&rtc_device,
+};
+
+static int __init sh7723_devices_setup(void)
+{
+	return platform_add_devices(sh7723_devices,
+				    ARRAY_SIZE(sh7723_devices));
+}
+__initcall(sh7723_devices_setup);
+
+enum {
+	UNUSED=0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	HUDI,
+	DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3,
+	_2DG_TRI,_2DG_INI,_2DG_CEI,
+	DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3,
+	VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI,
+	SCIFA_SCIFA0,
+	VPU_VPUI,
+	TPU_TPUI,
+	ADC_ADI,
+	USB_USI0,
+	RTC_ATI,RTC_PRI,RTC_CUI,
+	DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR,
+	DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR,
+	KEYSC_KEYI,
+	SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2,
+	MSIOF_MSIOFI0,MSIOF_MSIOFI1,
+	SCIFA_SCIFA1,
+	FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
+	I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
+	SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2,
+	CMT_CMTI,
+	TSIF_TSIFI,
+	SIU_SIUI,
+	SCIFA_SCIFA2,
+	TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
+	IRDA_IRDAI,
+	ATAPI_ATAPII,
+	SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2,
+	VEU2H1_VEU2HI,
+	LCDC_LCDCI,
+	TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
+
+	/* interrupt groups */
+	DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG,
+	SDHI1, RTC, DMAC1B, SDHI0,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+
+	INTC_VECT(DMAC1A_DEI0,0x700),
+	INTC_VECT(DMAC1A_DEI1,0x720),
+	INTC_VECT(DMAC1A_DEI2,0x740),
+	INTC_VECT(DMAC1A_DEI3,0x760),
+
+	INTC_VECT(_2DG_TRI, 0x780),
+	INTC_VECT(_2DG_INI, 0x7A0),
+	INTC_VECT(_2DG_CEI, 0x7C0),
+
+	INTC_VECT(DMAC0A_DEI0,0x800),
+	INTC_VECT(DMAC0A_DEI1,0x820),
+	INTC_VECT(DMAC0A_DEI2,0x840),
+	INTC_VECT(DMAC0A_DEI3,0x860),
+
+	INTC_VECT(VIO_CEUI,0x880),
+	INTC_VECT(VIO_BEUI,0x8A0),
+	INTC_VECT(VIO_VEU2HI,0x8C0),
+	INTC_VECT(VIO_VOUI,0x8E0),
+
+	INTC_VECT(SCIFA_SCIFA0,0x900),
+	INTC_VECT(VPU_VPUI,0x920),
+	INTC_VECT(TPU_TPUI,0x9A0),
+	INTC_VECT(ADC_ADI,0x9E0),
+	INTC_VECT(USB_USI0,0xA20),
+
+	INTC_VECT(RTC_ATI,0xA80),
+	INTC_VECT(RTC_PRI,0xAA0),
+	INTC_VECT(RTC_CUI,0xAC0),
+
+	INTC_VECT(DMAC1B_DEI4,0xB00),
+	INTC_VECT(DMAC1B_DEI5,0xB20),
+	INTC_VECT(DMAC1B_DADERR,0xB40),
+
+	INTC_VECT(DMAC0B_DEI4,0xB80),
+	INTC_VECT(DMAC0B_DEI5,0xBA0),
+	INTC_VECT(DMAC0B_DADERR,0xBC0),
+
+	INTC_VECT(KEYSC_KEYI,0xBE0),
+	INTC_VECT(SCIF_SCIF0,0xC00),
+	INTC_VECT(SCIF_SCIF1,0xC20),
+	INTC_VECT(SCIF_SCIF2,0xC40),
+	INTC_VECT(MSIOF_MSIOFI0,0xC80),
+	INTC_VECT(MSIOF_MSIOFI1,0xCA0),
+	INTC_VECT(SCIFA_SCIFA1,0xD00),
+
+	INTC_VECT(FLCTL_FLSTEI,0xD80),
+	INTC_VECT(FLCTL_FLTENDI,0xDA0),
+	INTC_VECT(FLCTL_FLTREQ0I,0xDC0),
+	INTC_VECT(FLCTL_FLTREQ1I,0xDE0),
+
+	INTC_VECT(I2C_ALI,0xE00),
+	INTC_VECT(I2C_TACKI,0xE20),
+	INTC_VECT(I2C_WAITI,0xE40),
+	INTC_VECT(I2C_DTEI,0xE60),
+
+	INTC_VECT(SDHI0_SDHII0,0xE80),
+	INTC_VECT(SDHI0_SDHII1,0xEA0),
+	INTC_VECT(SDHI0_SDHII2,0xEC0),
+
+	INTC_VECT(CMT_CMTI,0xF00),
+	INTC_VECT(TSIF_TSIFI,0xF20),
+	INTC_VECT(SIU_SIUI,0xF80),
+	INTC_VECT(SCIFA_SCIFA2,0xFA0),
+
+	INTC_VECT(TMU0_TUNI0,0x400),
+	INTC_VECT(TMU0_TUNI1,0x420),
+	INTC_VECT(TMU0_TUNI2,0x440),
+
+	INTC_VECT(IRDA_IRDAI,0x480),
+	INTC_VECT(ATAPI_ATAPII,0x4A0),
+
+	INTC_VECT(SDHI1_SDHII0,0x4E0),
+	INTC_VECT(SDHI1_SDHII1,0x500),
+	INTC_VECT(SDHI1_SDHII2,0x520),
+
+	INTC_VECT(VEU2H1_VEU2HI,0x560),
+	INTC_VECT(LCDC_LCDCI,0x580),
+
+	INTC_VECT(TMU1_TUNI0,0x920),
+	INTC_VECT(TMU1_TUNI1,0x940),
+	INTC_VECT(TMU1_TUNI2,0x960),
+
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3),
+	INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3),
+	INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI),
+	INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR),
+	INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
+	INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
+	INTC_GROUP(SDHI1, SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2),
+	INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
+	INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
+	INTC_GROUP(SDHI0,SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+	  { 0,  TMU1_TUNI2,TMU1_TUNI1,TMU1_TUNI0,0,SDHI1_SDHII2,SDHI1_SDHII1,SDHI1_SDHII0} },
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { 0,SDHI0_SDHII2,SDHI0_SDHII1,SDHI0_SDHII0,0,0,SCIFA_SCIFA2,SIU_SIUI } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } },
+	{ 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
+	  { 0,0,0,0,0,0,0,ATAPI_ATAPII } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} },
+	{ 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} },
+	{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
+			 mask_registers, prio_registers, sense_registers);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_mem_setup(void)
+{
+	/* Register the URAM space as Node 1 */
+	setup_bootmem_node(1, 0x055f0000, 0x05610000);
+}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 0ee776888c65..284f66f1ebbe 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -335,7 +335,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
 	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
 	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
-	[CPU_MXG]	= "MX-G",
+	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
 	[CPU_SH7366]	= "SH7366",	[CPU_SH_NONE]	= "Unknown"
 };
 
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index eff593080d4f..c2ea5d4df44a 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -333,7 +333,6 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 	}
 	sci_out(port, SCFCR, fcr_val);
 }
-
 #elif defined(CONFIG_CPU_SH3)
 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
@@ -384,6 +383,12 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 
 	sci_out(port, SCFCR, fcr_val);
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+	/* Nothing to do here.. */
+	sci_out(port, SCFCR, 0);
+}
 #else
 /* For SH7750 */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 01a9dd715f5d..fa8700a968fc 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -1,20 +1,5 @@
-/* $Id: sh-sci.h,v 1.4 2004/02/19 16:43:56 lethal Exp $
- *
- *  linux/drivers/serial/sh-sci.h
- *
- *  SuperH on-chip serial module support.  (SCI with no FIFO / with FIFO)
- *  Copyright (C) 1999, 2000  Niibe Yutaka
- *  Copyright (C) 2000  Greg Banks
- *  Copyright (C) 2002, 2003  Paul Mundt
- *  Modified to support multiple serial ports. Stuart Menefy (May 2000).
- *  Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
- *  Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
- *  Removed SH7300 support (Jul 2007).
- *  Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007).
- */
 #include <linux/serial_core.h>
 #include <asm/io.h>
-
 #include <asm/gpio.h>
 
 #if defined(CONFIG_H83007) || defined(CONFIG_H83068)
@@ -102,6 +87,15 @@
 # define SCSPTR0		SCPDR0
 # define SCIF_ORER		0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+# define SCSPTR0                0xa4050160
+# define SCSPTR1                0xa405013e
+# define SCSPTR2                0xa4050160
+# define SCSPTR3                0xa405013e
+# define SCSPTR4                0xa4050128
+# define SCSPTR5                0xa4050128
+# define SCIF_ORER              0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
@@ -395,6 +389,11 @@
                  h8_sci_offset, h8_sci_size) \
   CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
 #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+        #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
+                CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
+        #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
+                CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
 #else
 #define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
 		 sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
@@ -419,6 +418,18 @@ SCIF_FNS(SCFDR,  0x1c, 16)
 SCIF_FNS(SCxTDR, 0x20,  8)
 SCIF_FNS(SCxRDR, 0x24,  8)
 SCIF_FNS(SCLSR,  0x24, 16)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+SCIx_FNS(SCSMR,  0x00, 16, 0x00, 16)
+SCIx_FNS(SCBRR,  0x04,  8, 0x04,  8)
+SCIx_FNS(SCSCR,  0x08, 16, 0x08, 16)
+SCIx_FNS(SCxTDR, 0x20,  8, 0x0c,  8)
+SCIx_FNS(SCxSR,  0x14, 16, 0x10, 16)
+SCIx_FNS(SCxRDR, 0x24,  8, 0x14,  8)
+SCIF_FNS(SCTDSR, 0x0c,  8)
+SCIF_FNS(SCFER,  0x10, 16)
+SCIF_FNS(SCFCR,  0x18, 16)
+SCIF_FNS(SCFDR,  0x1c, 16)
+SCIF_FNS(SCLSR,  0x24, 16)
 #else
 /*      reg      SCI/SH3   SCI/SH4  SCIF/SH3   SCIF/SH4  SCI/H8*/
 /*      name     off  sz   off  sz   off  sz   off  sz   off  sz*/
@@ -589,6 +600,23 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
 	return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+        if (port->mapbase == 0xffe00000)
+                return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
+        if (port->mapbase == 0xffe10000)
+                return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
+        if (port->mapbase == 0xffe20000)
+                return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
+        if (port->mapbase == 0xa4e30000)
+                return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
+        if (port->mapbase == 0xa4e40000)
+                return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
+        if (port->mapbase == 0xa4e50000)
+                return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
+        return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 static inline int sci_rxd_in(struct uart_port *port)
 {
@@ -727,6 +755,8 @@ static inline int sci_rxd_in(struct uart_port *port)
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(16*bps)-1)
 #elif defined(__H8300H__) || defined(__H8300S__)
 #define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
 #elif defined(CONFIG_SUPERH64)
diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
index ec028c649215..da46e67ae26d 100644
--- a/include/asm-sh/cpu-sh4/freq.h
+++ b/include/asm-sh/cpu-sh4/freq.h
@@ -10,14 +10,14 @@
 #ifndef __ASM_CPU_SH4_FREQ_H
 #define __ASM_CPU_SH4_FREQ_H
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7366)
 #define FRQCR		        0xa4150000
 #define VCLKCR			0xa4150004
 #define SCLKACR			0xa4150008
 #define SCLKBCR			0xa415000c
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
 #define IrDACLKCR		0xa4150010
-#endif
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define	FRQCR			0xffc80000
diff --git a/include/asm-sh/cpu-sh4/rtc.h b/include/asm-sh/cpu-sh4/rtc.h
index f3d0f53275e4..25b1e6adfe8c 100644
--- a/include/asm-sh/cpu-sh4/rtc.h
+++ b/include/asm-sh/cpu-sh4/rtc.h
@@ -1,7 +1,12 @@
 #ifndef __ASM_SH_CPU_SH4_RTC_H
 #define __ASM_SH_CPU_SH4_RTC_H
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7723
+#define rtc_reg_size		sizeof(u16)
+#else
 #define rtc_reg_size		sizeof(u32)
+#endif
+
 #define RTC_BIT_INVERTED	0x40	/* bug on SH7750, SH7750S */
 #define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
 
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index f1b3a81191d4..b7c7ce80f03e 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -29,7 +29,8 @@ enum cpu_type {
 	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
 
 	/* SH-4A types */
-	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
+	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+	CPU_SH7723, CPU_SHX3,
 
 	/* SH4AL-DSP types */
 	CPU_SH7343, CPU_SH7722, CPU_SH7366,

From e5a4c65bef19366112ba002bc06d87450f02ad74 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 9 Apr 2008 17:57:05 +0900
Subject: [PATCH 26/27] sh: Fix up SH-4A part probe.

The SH-4A series probe we were relying on doesn't work any more on the
newer parts, bump this up to use CVR.CHIP instead so we have consistent
behaviour across all of the parts, which is what this should have been
testing in the first place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4/probe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index c478b16dbf4b..6ea87af7247e 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -53,7 +53,7 @@ int __init detect_cpu_and_cache_system(void)
 	/*
 	 * Setup some generic flags we can probe on SH-4A parts
 	 */
-	if (((pvr >> 16) & 0xff) == 0x10) {
+	if (((pvr >> 24) & 0xff) == 0x10) {
 		if ((cvr & 0x10000000) == 0)
 			boot_cpu_data.flags |= CPU_HAS_DSP;
 

From 440fc172ae333c52c458401fe059afcc6e91eebf Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 9 Apr 2008 17:58:22 +0900
Subject: [PATCH 27/27] sh: Fix up L2 cache probe.

SH7723 is the first hard silicon to implement the L2, and unsurprisingly,
does the precise inverse of what the specification alleges. XOR the
URAM/L2 size bits to get back in line with the existing parsing logic.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4/probe.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 6ea87af7247e..ebceb0dadff5 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -220,6 +220,12 @@ int __init detect_cpu_and_cache_system(void)
 	 * SH-4A's have an optional PIPT L2.
 	 */
 	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
+		/* Bug if we can't decode the L2 info */
+		BUG_ON(!(cvr & 0xf));
+
+		/* Silicon and specifications have clearly never met.. */
+		cvr ^= 0xf;
+
 		/*
 		 * Size calculation is much more sensible
 		 * than it is for the L1.