Merge branch 'devel-omap-misc' into omap-for-linus

This commit is contained in:
Tony Lindgren 2010-09-27 10:15:47 -07:00
Родитель 5a37e7840f 3a63833ec3
Коммит b245f26f5e
32 изменённых файлов: 193 добавлений и 133 удалений

Просмотреть файл

@ -19,6 +19,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mmc/host.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
#include <linux/err.h>
@ -190,7 +191,7 @@ static int __init omap2430_i2c_init(void)
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ext_clock = 1,

Просмотреть файл

@ -24,6 +24,7 @@
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -353,12 +354,12 @@ static struct omap2_hsmmc_info mmc[] = {
/* 8 bits (default) requires S6.3 == ON,
* so the SIM card isn't used; else 4 bits.
*/
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 4,
},
{
.mmc = 2,
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 7,
},
{} /* Terminator */

Просмотреть файл

@ -193,12 +193,12 @@ static struct omap_musb_board_data musb_board_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,

Просмотреть файл

@ -31,6 +31,7 @@
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
@ -579,14 +580,14 @@ static struct twl4030_keypad_data cm_t35_kp_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.transceiver = 1,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,

Просмотреть файл

@ -28,6 +28,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@ -105,7 +106,7 @@ static struct omap_nand_platform_data devkit8000_nand_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */

Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -248,13 +249,13 @@ static struct regulator_init_data igep2_vmmc2 = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},

Просмотреть файл

@ -27,6 +27,7 @@
#include <linux/i2c/twl.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -362,7 +363,7 @@ static int __init omap_i2c_init(void)
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},

Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
#include <sound/tlv320aic3x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@ -487,7 +488,7 @@ static struct omap_mmc_platform_data mmc1_data = {
.max_freq = 24000000,
.dma_mask = 0xffffffff,
.slots[0] = {
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.set_power = n8x0_mmc_set_power,
.set_bus_mode = n8x0_mmc_set_bus_mode,
.get_cover_state = n8x0_mmc_get_cover_state,
@ -614,29 +615,35 @@ static int n8x0_menelaus_late_init(struct device *dev)
return 0;
}
static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = {
{
I2C_BOARD_INFO("menelaus", 0x72),
.irq = INT_24XX_SYS_NIRQ,
},
};
#else
static int n8x0_menelaus_late_init(struct device *dev)
{
return 0;
}
#endif
static struct menelaus_platform_data n8x0_menelaus_platform_data = {
static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
.late_init = n8x0_menelaus_late_init,
};
static void __init n8x0_menelaus_init(void)
{
n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data;
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
ARRAY_SIZE(n8x0_i2c_board_info_1));
}
static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
{
I2C_BOARD_INFO("menelaus", 0x72),
.irq = INT_24XX_SYS_NIRQ,
.platform_data = &n8x0_menelaus_platform_data,
},
};
#else
static inline void __init n8x0_menelaus_init(void)
{
}
#endif
static struct aic3x_pdata n810_aic33_data __initdata = {
.gpio_reset = 118,
};
static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &n810_aic33_data,
},
};
static void __init n8x0_map_io(void)
{
@ -653,6 +660,11 @@ static void __init n8x0_init_irq(void)
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
@ -665,9 +677,14 @@ static void __init n8x0_init_machine(void)
/* FIXME: add n810 spi devices */
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
ARRAY_SIZE(n8x0_i2c_board_info_1));
omap_register_i2c_bus(2, 400, NULL, 0);
if (machine_is_nokia_n810())
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
omap_serial_init();
n8x0_menelaus_init();
n8x0_onenand_init();
n8x0_mmc_init();
n8x0_usb_init();

Просмотреть файл

@ -27,6 +27,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@ -166,7 +167,7 @@ static void __init beagle_display_init(void)
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */

Просмотреть файл

@ -31,6 +31,7 @@
#include <linux/smsc911x.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -370,7 +371,7 @@ static struct regulator_init_data omap3evm_vsim = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 63,
},

Просмотреть файл

@ -32,6 +32,7 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <asm/mach-types.h>
@ -276,14 +277,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card)
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 126,
.ext_clock = 0,
},
{
.mmc = 2,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 127,
.ext_clock = 1,
@ -291,7 +292,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
},
{
.mmc = 3,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.init_card = pandora_wl1251_init_card,

Просмотреть файл

@ -26,6 +26,7 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -275,7 +276,7 @@ static struct regulator_init_data omap3stalker_vsim = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 23,
},

Просмотреть файл

@ -27,6 +27,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
#include <plat/mcspi.h>
#include <linux/spi/spi.h>
@ -108,7 +109,7 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
},
{} /* Terminator */

Просмотреть файл

@ -56,7 +56,7 @@ static struct omap_musb_board_data musb_board_data = {
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
@ -274,8 +274,6 @@ static int __init omap4_panda_i2c_init(void)
}
static void __init omap4_panda_init(void)
{
int status;
omap4_panda_i2c_init();
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);

Просмотреть файл

@ -32,6 +32,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -303,13 +304,13 @@ static void __init overo_flash_init(void)
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.transceiver = true,

Просмотреть файл

@ -302,7 +302,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.cover_only = true,
.gpio_cd = 160,
.gpio_wp = -EINVAL,
@ -311,7 +311,8 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "internal",
.mmc = 2,
.wires = 8, /* See also rx51_mmc2_remux */
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
/* See also rx51_mmc2_remux */
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,

Просмотреть файл

@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -155,14 +156,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
.mmc = 1,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_wp = -EINVAL,
.power_saving = true,
},
{
.name = "internal",
.mmc = 2,
.wires = 8,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,

Просмотреть файл

@ -1838,7 +1838,7 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "des_ick", &des_ick, CK_242X),
CLK("omap-sham", "ick", &sha_ick, CK_242X),
CLK("omap_rng", "ick", &rng_ick, CK_242X),
CLK(NULL, "aes_ick", &aes_ick, CK_242X),
CLK("omap-aes", "ick", &aes_ick, CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb_hdrc", "fck", &osc_ck, CK_242X),

Просмотреть файл

@ -1926,7 +1926,7 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "des_ick", &des_ick, CK_243X),
CLK("omap-sham", "ick", &sha_ick, CK_243X),
CLK("omap_rng", "ick", &rng_ick, CK_243X),
CLK(NULL, "aes_ick", &aes_ick, CK_243X),
CLK("omap-aes", "ick", &aes_ick, CK_243X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X),
CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),

Просмотреть файл

@ -3288,7 +3288,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2 | CK_AM35XX),
CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2 | CK_AM35XX),
CLK(NULL, "icr_ick", &icr_ick, CK_343X),
CLK(NULL, "aes2_ick", &aes2_ick, CK_343X),
CLK("omap-aes", "ick", &aes2_ick, CK_343X),
CLK("omap-sham", "ick", &sha12_ick, CK_343X),
CLK(NULL, "des2_ick", &des2_ick, CK_343X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_3XXX),

Просмотреть файл

@ -498,6 +498,76 @@ static void omap_init_sham(void)
static inline void omap_init_sham(void) { }
#endif
#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE)
#ifdef CONFIG_ARCH_OMAP2
static struct resource omap2_aes_resources[] = {
{
.start = OMAP24XX_SEC_AES_BASE,
.end = OMAP24XX_SEC_AES_BASE + 0x4C,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP24XX_DMA_AES_TX,
.flags = IORESOURCE_DMA,
},
{
.start = OMAP24XX_DMA_AES_RX,
.flags = IORESOURCE_DMA,
}
};
static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources);
#else
#define omap2_aes_resources NULL
#define omap2_aes_resources_sz 0
#endif
#ifdef CONFIG_ARCH_OMAP3
static struct resource omap3_aes_resources[] = {
{
.start = OMAP34XX_SEC_AES_BASE,
.end = OMAP34XX_SEC_AES_BASE + 0x4C,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP34XX_DMA_AES2_TX,
.flags = IORESOURCE_DMA,
},
{
.start = OMAP34XX_DMA_AES2_RX,
.flags = IORESOURCE_DMA,
}
};
static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources);
#else
#define omap3_aes_resources NULL
#define omap3_aes_resources_sz 0
#endif
static struct platform_device aes_device = {
.name = "omap-aes",
.id = -1,
};
static void omap_init_aes(void)
{
if (cpu_is_omap24xx()) {
aes_device.resource = omap2_aes_resources;
aes_device.num_resources = omap2_aes_resources_sz;
} else if (cpu_is_omap34xx()) {
aes_device.resource = omap3_aes_resources;
aes_device.num_resources = omap3_aes_resources_sz;
} else {
pr_err("%s: platform not supported\n", __func__);
return;
}
platform_device_register(&aes_device);
}
#else
static inline void omap_init_aes(void) { }
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
@ -624,7 +694,7 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_mux_init_signal("sdmmc_dat0", 0);
omap_mux_init_signal("sdmmc_dat_dir0", 0);
omap_mux_init_signal("sdmmc_cmd_dir", 0);
if (mmc_controller->slots[0].wires == 4) {
if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
omap_mux_init_signal("sdmmc_dat1", 0);
omap_mux_init_signal("sdmmc_dat2", 0);
omap_mux_init_signal("sdmmc_dat3", 0);
@ -652,8 +722,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
if (mmc_controller->slots[0].caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat2",
@ -661,7 +731,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].wires == 8) {
if (mmc_controller->slots[0].caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat5",
@ -685,8 +756,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
* in the board-*.c files
*/
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
if (mmc_controller->slots[0].caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat2",
@ -694,7 +765,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].wires == 8) {
if (mmc_controller->slots[0].caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
@ -854,6 +926,7 @@ static int __init omap2_init_devices(void)
omap_hdq_init();
omap_init_sti();
omap_init_sham();
omap_init_aes();
omap_init_vout();
return 0;

Просмотреть файл

@ -258,7 +258,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
"mmc%islot%i", c->mmc, 1);
mmc->slots[0].name = hc->name;
mmc->nr_slots = 1;
mmc->slots[0].wires = c->wires;
mmc->slots[0].caps = c->caps;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
@ -316,16 +316,20 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
}
/* Omap3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() && c->wires > 4) {
c->wires = 4;
mmc->slots[0].wires = c->wires;
if (cpu_is_omap3630() &&
(c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
mmc->slots[0].caps = c->caps;
}
break;
case 2:
if (c->ext_clock)
c->transceiver = 1;
if (c->transceiver && c->wires > 4)
c->wires = 4;
if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
/* FALLTHROUGH */
case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {

Просмотреть файл

@ -10,7 +10,8 @@ struct mmc_card;
struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u8 wires; /* 1/4/8 wires */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */

Просмотреть файл

@ -23,29 +23,6 @@
#include <plat/cpu.h>
#include <plat/mcbsp.h>
#include "mux.h"
static void omap2_mcbsp2_mux_setup(void)
{
omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA);
omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA);
omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA);
omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA);
omap_mux_init_gpio(117, OMAP_PULL_ENA);
/*
* TODO: Need to add MUX settings for OMAP 2430 SDP
*/
}
static void omap2_mcbsp_request(unsigned int id)
{
if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
omap2_mcbsp2_mux_setup();
}
static struct omap_mcbsp_ops omap2_mcbsp_ops = {
.request = omap2_mcbsp_request,
};
#ifdef CONFIG_ARCH_OMAP2420
static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
@ -55,7 +32,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@ -63,7 +39,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
@ -82,7 +57,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@ -90,7 +64,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
@ -98,7 +71,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
@ -106,7 +78,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
@ -114,7 +85,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
@ -133,7 +103,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@ -143,7 +112,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */
},
{
@ -153,7 +121,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@ -162,7 +129,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP4_TX,
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
{
@ -171,7 +137,6 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
.dma_tx_sync = OMAP24XX_DMA_MCBSP5_TX,
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
.buffer_size = 0x80, /* The FIFO has 128 locations */
},
};
@ -189,28 +154,24 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
.dma_rx_sync = OMAP44XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP1_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP1,
.ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP2_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP2_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP2,
.ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP3_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP3_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP3,
.ops = &omap2_mcbsp_ops,
},
{
.phys_base = OMAP44XX_MCBSP4_BASE,
.dma_rx_sync = OMAP44XX_DMA_MCBSP4_RX,
.dma_tx_sync = OMAP44XX_DMA_MCBSP4_TX,
.tx_irq = OMAP44XX_IRQ_MCBSP4,
.ops = &omap2_mcbsp_ops,
},
};
#define OMAP44XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap44xx_mcbsp_pdata)

Просмотреть файл

@ -87,7 +87,7 @@ static char *omap_mux_options;
int __init omap_mux_init_gpio(int gpio, int val)
{
struct omap_mux_entry *e;
struct omap_mux *gpio_mux;
struct omap_mux *gpio_mux = NULL;
u16 old_mode;
u16 mux_mode;
int found = 0;

Просмотреть файл

@ -2084,7 +2084,7 @@ void omap2_gpio_prepare_for_idle(int power_state)
for (i = min; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l1, l2;
u32 l1 = 0, l2 = 0;
int j;
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
@ -2152,7 +2152,7 @@ void omap2_gpio_resume_after_idle(void)
min = 1;
for (i = min; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l, gen, gen0, gen1;
u32 l = 0, gen, gen0, gen1;
int j;
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)

Просмотреть файл

@ -18,6 +18,8 @@
* 02110-1301 USA
*
*/
#ifndef __ASM__ARCH_OMAP_I2C_H
#define __ASM__ARCH_OMAP_I2C_H
#include <linux/i2c.h>
@ -36,3 +38,5 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
void __init omap1_i2c_mux_pins(int bus_id);
void __init omap2_i2c_mux_pins(int bus_id);
#endif /* __ASM__ARCH_OMAP_I2C_H */

Просмотреть файл

@ -73,10 +73,9 @@ struct omap_mmc_platform_data {
struct omap_mmc_slot_data {
/* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
* 8 wire signaling is also optional, and is used with HSMMC
*/
u8 wires;
/* 4/8 wires and any additional host capabilities
* need to OR'd all capabilities (ref. linux/mmc/host.h) */
u32 caps;
/*
* nomux means "standard" muxing is wrong on this board, and

Просмотреть файл

@ -105,7 +105,7 @@ static inline void omap1_usb_init(struct omap_usb_config *pdata)
#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
void omap2_usbfs_init(struct omap_usb_config *pdata);
#else
static inline omap2_usbfs_init(struct omap_usb_config *pdata)
static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
{
}
#endif

Просмотреть файл

@ -878,7 +878,7 @@ EXPORT_SYMBOL(omap_mcbsp_free);
void omap_mcbsp_start(unsigned int id, int tx, int rx)
{
struct omap_mcbsp *mcbsp;
int idle;
int enable_srg = 0;
u16 w;
if (!omap_mcbsp_check_valid_id(id)) {
@ -893,10 +893,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
/* Only enable SRG, if McBSP is master */
w = MCBSP_READ_CACHE(mcbsp, PCR0);
if (w & (FSXM | FSRM | CLKXM | CLKRM))
enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
if (idle) {
if (enable_srg) {
/* Start the sample generator */
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
@ -919,7 +922,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
*/
udelay(500);
if (idle) {
if (enable_srg) {
/* Start frame sync */
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));

Просмотреть файл

@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
host->slots[id] = slot;
mmc->caps = 0;
if (host->pdata->slots[id].wires >= 4)
if (host->pdata->slots[id].caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;

Просмотреть файл

@ -2116,23 +2116,9 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
switch (mmc_slot(host).wires) {
case 8:
mmc->caps |= MMC_CAP_8_BIT_DATA;
/* Fall through */
case 4:
mmc->caps |= mmc_slot(host).caps;
if (mmc->caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
break;
case 1:
/* Nothing to crib here */
case 0:
/* Assuming nothing was given by board, Core use's 1-Bit */
break;
default:
/* Completely unexpected.. Core goes with 1-Bit Width */
dev_crit(mmc_dev(host->mmc), "Invalid width %d\n used!"
"using 1 instead\n", mmc_slot(host).wires);
}
if (mmc_slot(host).nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;