microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'linus' into sched/core 

Merge reason: merge the latest fixes, update to -rc4.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2010-04-15 09:35:24 +02:00
Родитель 371fd7e7a5 2ba3abd818
Коммит b257c14ceb
4545 изменённых файлов: 23852 добавлений и 3896 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

13
Documentation/DocBook/tracepoint.tmpl
Просмотреть файл

@ -16,6 +16,15 @@
</address>
</affiliation>
</author>
<author>
<firstname>William</firstname>
<surname>Cohen</surname>
<affiliation>
<address>
<email>wcohen@redhat.com</email>
</address>
</affiliation>
</author>
</authorgroup>
<legalnotice>
@ -91,4 +100,8 @@
!Iinclude/trace/events/signal.h
</chapter>
<chapter id="block">
<title>Block IO</title>
!Iinclude/trace/events/block.h
</chapter>
</book>

4
Documentation/block/biodoc.txt
Просмотреть файл

@ -1162,8 +1162,8 @@ where a driver received a request ala this before:
As mentioned, there is no virtual mapping of a bio. For DMA, this is
not a problem as the driver probably never will need a virtual mapping.
Instead it needs a bus mapping (pci_map_page for a single segment or
use blk_rq_map_sg for scatter gather) to be able to ship it to the driver. For
Instead it needs a bus mapping (dma_map_page for a single segment or
use dma_map_sg for scatter gather) to be able to ship it to the driver. For
PIO drivers (or drivers that need to revert to PIO transfer once in a
while (IDE for example)), where the CPU is doing the actual data
transfer a virtual mapping is needed. If the driver supports highmem I/O,

1
Documentation/connector/cn_test.c
Просмотреть файл

@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/connector.h>

14
Documentation/fb/imacfb.txt → Documentation/fb/efifb.txt
Просмотреть файл

@ -1,9 +1,9 @@
What is imacfb?
What is efifb?
===============
This is a generic EFI platform driver for Intel based Apple computers.
Imacfb is only for EFI booted Intel Macs.
efifb is only for EFI booted Intel Macs.
Supported Hardware
==================
@ -16,16 +16,16 @@ MacMini
How to use it?
==============
Imacfb does not have any kind of autodetection of your machine.
efifb does not have any kind of autodetection of your machine.
You have to add the following kernel parameters in your elilo.conf:
Macbook :
video=imacfb:macbook
video=efifb:macbook
MacMini :
video=imacfb:mini
video=efifb:mini
Macbook Pro 15", iMac 17" :
video=imacfb:i17
video=efifb:i17
Macbook Pro 17", iMac 20" :
video=imacfb:i20
video=efifb:i20
--
Edgar Hucek <gimli@dark-green.com>

18
Documentation/filesystems/9p.txt
Просмотреть файл

@ -37,6 +37,15 @@ For Plan 9 From User Space applications (http://swtch.com/plan9)
mount -t 9p `namespace`/acme /mnt/9 -o trans=unix,uname=$USER
For server running on QEMU host with virtio transport:
mount -t 9p -o trans=virtio <mount_tag> /mnt/9
where mount_tag is the tag associated by the server to each of the exported
mount points. Each 9P export is seen by the client as a virtio device with an
associated "mount_tag" property. Available mount tags can be
seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio<n>/mount_tag files.
OPTIONS
=======
@ -47,7 +56,7 @@ OPTIONS
fd - used passed file descriptors for connection
(see rfdno and wfdno)
virtio - connect to the next virtio channel available
(from lguest or KVM with trans_virtio module)
(from QEMU with trans_virtio module)
rdma - connect to a specified RDMA channel
uname=name user name to attempt mount as on the remote server. The
@ -85,7 +94,12 @@ OPTIONS
port=n port to connect to on the remote server
noextend force legacy mode (no 9p2000.u semantics)
noextend force legacy mode (no 9p2000.u or 9p2000.L semantics)
version=name Select 9P protocol version. Valid options are:
9p2000 - Legacy mode (same as noextend)
9p2000.u - Use 9P2000.u protocol
9p2000.L - Use 9P2000.L protocol
dfltuid attempt to mount as a particular uid

143
Documentation/networking/stmmac.txt Normal file
Просмотреть файл

@ -0,0 +1,143 @@
STMicroelectronics 10/100/1000 Synopsys Ethernet driver
Copyright (C) 2007-2010 STMicroelectronics Ltd
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
(Synopsys IP blocks); it has been fully tested on STLinux platforms.
Currently this network device driver is for all STM embedded MAC/GMAC
(7xxx SoCs).
DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
Universal version 4.0 have been used for developing the first code
implementation.
Please, for more information also visit: www.stlinux.com
1) Kernel Configuration
The kernel configuration option is STMMAC_ETH:
Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
2) Driver parameters list:
debug: message level (0: no output, 16: all);
phyaddr: to manually provide the physical address to the PHY device;
dma_rxsize: DMA rx ring size;
dma_txsize: DMA tx ring size;
buf_sz: DMA buffer size;
tc: control the HW FIFO threshold;
tx_coe: Enable/Disable Tx Checksum Offload engine;
watchdog: transmit timeout (in milliseconds);
flow_ctrl: Flow control ability [on/off];
pause: Flow Control Pause Time;
tmrate: timer period (only if timer optimisation is configured).
3) Command line options
Driver parameters can be also passed in command line by using:
stmmaceth=dma_rxsize:128,dma_txsize:512
4) Driver information and notes
4.1) Transmit process
The xmit method is invoked when the kernel needs to transmit a packet; it sets
the descriptors in the ring and informs the DMA engine that there is a packet
ready to be transmitted.
Once the controller has finished transmitting the packet, an interrupt is
triggered; So the driver will be able to release the socket buffers.
By default, the driver sets the NETIF_F_SG bit in the features field of the
net_device structure enabling the scatter/gather feature.
4.2) Receive process
When one or more packets are received, an interrupt happens. The interrupts
are not queued so the driver has to scan all the descriptors in the ring during
the receive process.
This is based on NAPI so the interrupt handler signals only if there is work to be
done, and it exits.
Then the poll method will be scheduled at some future point.
The incoming packets are stored, by the DMA, in a list of pre-allocated socket
buffers in order to avoid the memcpy (Zero-copy).
4.3) Timer-Driver Interrupt
Instead of having the device that asynchronously notifies the frame receptions, the
driver configures a timer to generate an interrupt at regular intervals.
Based on the granularity of the timer, the frames that are received by the device
will experience different levels of latency. Some NICs have dedicated timer
device to perform this task. STMMAC can use either the RTC device or the TMU
channel 2 on STLinux platforms.
The timers frequency can be passed to the driver as parameter; when change it,
take care of both hardware capability and network stability/performance impact.
Several performance tests on STM platforms showed this optimisation allows to spare
the CPU while having the maximum throughput.
4.4) WOL
Wake up on Lan feature through Magic Frame is only supported for the GMAC
core.
4.5) DMA descriptors
Driver handles both normal and enhanced descriptors. The latter has been only
tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
4.6) Ethtool support
Ethtool is supported. Driver statistics and internal errors can be taken using:
ethtool -S ethX command. It is possible to dump registers etc.
4.7) Jumbo and Segmentation Offloading
Jumbo frames are supported and tested for the GMAC.
The GSO has been also added but it's performed in software.
LRO is not supported.
4.8) Physical
The driver is compatible with PAL to work with PHY and GPHY devices.
4.9) Platform information
Several information came from the platform; please refer to the
driver's Header file in include/linux directory.
struct plat_stmmacenet_data {
int bus_id;
int pbl;
int has_gmac;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(unsigned long ioaddr);
#ifdef CONFIG_STM_DRIVERS
struct stm_pad_config *pad_config;
#endif
void *bsp_priv;
};
Where:
- pbl (Programmable Burst Length) is maximum number of
beats to be transferred in one DMA transaction.
GMAC also enables the 4xPBL by default.
- fix_mac_speed and bus_setup are used to configure internal target
registers (on STM platforms);
- has_gmac: GMAC core is on board (get it at run-time in the next step);
- bus_id: bus identifier.
struct plat_stmmacphy_data {
int bus_id;
int phy_addr;
unsigned int phy_mask;
int interface;
int (*phy_reset)(void *priv);
void *priv;
};
Where:
- bus_id: bus identifier;
- phy_addr: physical address used for the attached phy device;
set it to -1 to get it at run-time;
- interface: physical MII interface mode;
- phy_reset: hook to reset HW function.
TODO:
- Continue to make the driver more generic and suitable for other Synopsys
Ethernet controllers used on other architectures (i.e. ARM).
- 10G controllers are not supported.
- MAC uses Normal descriptors and GMAC uses enhanced ones.
This is a limit that should be reviewed. MAC could want to
use the enhanced structure.
- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
- Review the timer optimisation code to use an embedded device that seems to be
available in new chip generations.

76
Documentation/networking/timestamping.txt
Просмотреть файл

@ -41,11 +41,12 @@ SOF_TIMESTAMPING_SOFTWARE: return system time stamp generated in
SOF_TIMESTAMPING_TX/RX determine how time stamps are generated.
SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the
following control message:
struct scm_timestamping {
struct timespec systime;
struct timespec hwtimetrans;
struct timespec hwtimeraw;
};
struct scm_timestamping {
struct timespec systime;
struct timespec hwtimetrans;
struct timespec hwtimeraw;
};
recvmsg() can be used to get this control message for regular incoming
packets. For send time stamps the outgoing packet is looped back to
@ -87,12 +88,13 @@ by the network device and will be empty without that support.
SIOCSHWTSTAMP:
Hardware time stamping must also be initialized for each device driver
that is expected to do hardware time stamping. The parameter is:
that is expected to do hardware time stamping. The parameter is defined in
/include/linux/net_tstamp.h as:
struct hwtstamp_config {
int flags; /* no flags defined right now, must be zero */
int tx_type; /* HWTSTAMP_TX_* */
int rx_filter; /* HWTSTAMP_FILTER_* */
int flags; /* no flags defined right now, must be zero */
int tx_type; /* HWTSTAMP_TX_* */
int rx_filter; /* HWTSTAMP_FILTER_* */
};
Desired behavior is passed into the kernel and to a specific device by
@ -139,42 +141,56 @@ enum {
/* time stamp any incoming packet */
HWTSTAMP_FILTER_ALL,
/* return value: time stamp all packets requested plus some others */
HWTSTAMP_FILTER_SOME,
/* return value: time stamp all packets requested plus some others */
HWTSTAMP_FILTER_SOME,
/* PTP v1, UDP, any kind of event packet */
HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
...
/* for the complete list of values, please check
* the include file /include/linux/net_tstamp.h
*/
};
DEVICE IMPLEMENTATION
A driver which supports hardware time stamping must support the
SIOCSHWTSTAMP ioctl. Time stamps for received packets must be stored
in the skb with skb_hwtstamp_set().
SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with
the actual values as described in the section on SIOCSHWTSTAMP.
Time stamps for received packets must be stored in the skb. To get a pointer
to the shared time stamp structure of the skb call skb_hwtstamps(). Then
set the time stamps in the structure:
struct skb_shared_hwtstamps {
/* hardware time stamp transformed into duration
* since arbitrary point in time
*/
ktime_t hwtstamp;
ktime_t syststamp; /* hwtstamp transformed to system time base */
};
Time stamps for outgoing packets are to be generated as follows:
- In hard_start_xmit(), check if skb_hwtstamp_check_tx_hardware()
returns non-zero. If yes, then the driver is expected
to do hardware time stamping.
- In hard_start_xmit(), check if skb_tx(skb)->hardware is set no-zero.
If yes, then the driver is expected to do hardware time stamping.
- If this is possible for the skb and requested, then declare
that the driver is doing the time stamping by calling
skb_hwtstamp_tx_in_progress(). A driver not supporting
hardware time stamping doesn't do that. A driver must never
touch sk_buff::tstamp! It is used to store how time stamping
for an outgoing packets is to be done.
that the driver is doing the time stamping by setting the field
skb_tx(skb)->in_progress non-zero. You might want to keep a pointer
to the associated skb for the next step and not free the skb. A driver
not supporting hardware time stamping doesn't do that. A driver must
never touch sk_buff::tstamp! It is used to store software generated
time stamps by the network subsystem.
- As soon as the driver has sent the packet and/or obtained a
hardware time stamp for it, it passes the time stamp back by
calling skb_hwtstamp_tx() with the original skb, the raw
hardware time stamp and a handle to the device (necessary
to convert the hardware time stamp to system time). If obtaining
the hardware time stamp somehow fails, then the driver should
not fall back to software time stamping. The rationale is that
this would occur at a later time in the processing pipeline
than other software time stamping and therefore could lead
to unexpected deltas between time stamps.
- If the driver did not call skb_hwtstamp_tx_in_progress(), then
hardware time stamp. skb_hwtstamp_tx() clones the original skb and
adds the timestamps, therefore the original skb has to be freed now.
If obtaining the hardware time stamp somehow fails, then the driver
should not fall back to software time stamping. The rationale is that
this would occur at a later time in the processing pipeline than other
software time stamping and therefore could lead to unexpected deltas
between time stamps.
- If the driver did not call set skb_tx(skb)->in_progress, then
dev_hard_start_xmit() checks whether software time stamping
is wanted as fallback and potentially generates the time stamp.

54
Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
Просмотреть файл

@ -21,6 +21,15 @@ Required properties:
- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
threads.
Optional properties:
- fsl,firmware-phandle:
Usage: required only if there is no fsl,qe-firmware child node
Value type: <phandle>
Definition: Points to a firmware node (see "QE Firmware Node" below)
that contains the firmware that should be uploaded for this QE.
The compatible property for the firmware node should say,
"fsl,qe-firmware".
Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
generators in Hz.
@ -59,3 +68,48 @@ Example:
reg = <0 c000>;
};
};
* QE Firmware Node
This node defines a firmware binary that is embedded in the device tree, for
the purpose of passing the firmware from bootloader to the kernel, or from
the hypervisor to the guest.
The firmware node itself contains the firmware binary contents, a compatible
property, and any firmware-specific properties. The node should be placed
inside a QE node that needs it. Doing so eliminates the need for a
fsl,firmware-phandle property. Other QE nodes that need the same firmware
should define an fsl,firmware-phandle property that points to the firmware node
in the first QE node.
The fsl,firmware property can be specified in the DTS (possibly using incbin)
or can be inserted by the boot loader at boot time.
Required properties:
- compatible
Usage: required
Value type: <string>
Definition: A standard property. Specify a string that indicates what
kind of firmware it is. For QE, this should be "fsl,qe-firmware".
- fsl,firmware
Usage: required
Value type: <prop-encoded-array>, encoded as an array of bytes
Definition: A standard property. This property contains the firmware
binary "blob".
Example:
qe1@e0080000 {
compatible = "fsl,qe";
qe_firmware:qe-firmware {
compatible = "fsl,qe-firmware";
fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
};
...
};
qe2@e0090000 {
compatible = "fsl,qe";
fsl,firmware-phandle = <&qe_firmware>;
...
};

16
Documentation/sound/alsa/HD-Audio.txt
Просмотреть файл

@ -119,10 +119,18 @@ the codec slots 0 and 1 no matter what the hardware reports.
Interrupt Handling
~~~~~~~~~~~~~~~~~~
In rare but some cases, the interrupt isn't properly handled as
default. You would notice this by the DMA transfer error reported by
ALSA PCM core, for example. Using MSI might help in such a case.
Pass `enable_msi=1` option for enabling MSI.
HD-audio driver uses MSI as default (if available) since 2.6.33
kernel as MSI works better on some machines, and in general, it's
better for performance. However, Nvidia controllers showed bad
regressions with MSI (especially in a combination with AMD chipset),
thus we disabled MSI for them.
There seem also still other devices that don't work with MSI. If you
see a regression wrt the sound quality (stuttering, etc) or a lock-up
in the recent kernel, try to pass `enable_msi=0` option to disable
MSI. If it works, you can add the known bad device to the blacklist
defined in hda_intel.c. In such a case, please report and give the
patch back to the upstream developer.
HD-AUDIO CODEC

3
Documentation/watchdog/src/watchdog-simple.c
Просмотреть файл

@ -17,9 +17,6 @@ int main(void)
ret = -1;
break;
}
ret = fsync(fd);
if (ret)
break;
sleep(10);
}
close(fd);

8
Documentation/watchdog/src/watchdog-test.c
Просмотреть файл

@ -31,6 +31,8 @@ static void keep_alive(void)
*/
int main(int argc, char *argv[])
{
int flags;
fd = open("/dev/watchdog", O_WRONLY);
if (fd == -1) {
@ -41,12 +43,14 @@ int main(int argc, char *argv[])
if (argc > 1) {
if (!strncasecmp(argv[1], "-d", 2)) {
ioctl(fd, WDIOC_SETOPTIONS, WDIOS_DISABLECARD);
flags = WDIOS_DISABLECARD;
ioctl(fd, WDIOC_SETOPTIONS, &flags);
fprintf(stderr, "Watchdog card disabled.\n");
fflush(stderr);
exit(0);
} else if (!strncasecmp(argv[1], "-e", 2)) {
ioctl(fd, WDIOC_SETOPTIONS, WDIOS_ENABLECARD);
flags = WDIOS_ENABLECARD;
ioctl(fd, WDIOC_SETOPTIONS, &flags);
fprintf(stderr, "Watchdog card enabled.\n");
fflush(stderr);
exit(0);

5
Documentation/watchdog/watchdog-api.txt
Просмотреть файл

@ -222,11 +222,10 @@ returned value is the temperature in degrees fahrenheit.
ioctl(fd, WDIOC_GETTEMP, &temperature);
Finally the SETOPTIONS ioctl can be used to control some aspects of
the cards operation; right now the pcwd driver is the only one
supporting this ioctl.
the cards operation.
int options = 0;
ioctl(fd, WDIOC_SETOPTIONS, options);
ioctl(fd, WDIOC_SETOPTIONS, &options);
The following options are available:

23
MAINTAINERS
Просмотреть файл

@ -971,6 +971,16 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.mcuos.com
S: Maintained
ARM/U300 MACHINE SUPPORT
M: Linus Walleij <linus.walleij@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: arch/arm/mach-u300/
F: drivers/i2c/busses/i2c-stu300.c
F: drivers/rtc/rtc-coh901331.c
F: drivers/watchdog/coh901327_wdt.c
F: drivers/dma/coh901318*
ARM/U8500 ARM ARCHITECTURE
M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -2474,12 +2484,6 @@ L: linuxppc-dev@ozlabs.org
S: Odd Fixes
F: drivers/char/hvc_*
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/char/virtio_console.c
iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
M: Peter Jones <pjones@redhat.com>
M: Konrad Rzeszutek Wilk <konrad@kernel.org>
@ -5971,6 +5975,13 @@ S: Maintained
F: Documentation/filesystems/vfat.txt
F: fs/fat/
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/char/virtio_console.c
F: include/linux/virtio_console.h
VIRTIO HOST (VHOST)
M: "Michael S. Tsirkin" <mst@redhat.com>
L: kvm@vger.kernel.org

2
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
EXTRAVERSION = -rc3
EXTRAVERSION = -rc4
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*

1
arch/alpha/boot/bootp.c
Просмотреть файл

@ -8,6 +8,7 @@
* based significantly on the arch/alpha/boot/main.c of Linus Torvalds
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>

1
arch/alpha/boot/bootpz.c
Просмотреть файл

@ -10,6 +10,7 @@
* and the decompression code from MILO.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>

1
arch/alpha/boot/main.c
Просмотреть файл

@ -6,6 +6,7 @@
* This file is the bootloader for the Linux/AXP kernel
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>

1
arch/alpha/boot/misc.c
Просмотреть файл

@ -19,6 +19,7 @@
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <asm/uaccess.h>

1
arch/alpha/kernel/irq.c
Просмотреть файл

@ -18,7 +18,6 @@
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/irq.h>

2
arch/alpha/kernel/osf_sys.c
Просмотреть файл

@ -20,7 +20,6 @@
#include <linux/syscalls.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/utsname.h>
#include <linux/time.h>
@ -37,6 +36,7 @@
#include <linux/uio.h>
#include <linux/vfs.h>
#include <linux/rcupdate.h>
#include <linux/slab.h>
#include <asm/fpu.h>
#include <asm/io.h>

1
arch/alpha/kernel/pci-noop.c
Просмотреть файл

@ -7,6 +7,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/gfp.h>
#include <linux/capability.h>
#include <linux/mm.h>
#include <linux/errno.h>

1
arch/alpha/kernel/pci-sysfs.c
Просмотреть файл

@ -10,6 +10,7 @@
*/
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/pci.h>
static int hose_mmap_page_range(struct pci_controller *hose,

2
arch/alpha/kernel/pci_iommu.c
Просмотреть файл

@ -5,7 +5,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/gfp.h>
#include <linux/bootmem.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>

2
arch/alpha/kernel/process.c
Просмотреть файл

@ -17,7 +17,6 @@
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/time.h>
#include <linux/major.h>
@ -28,6 +27,7 @@
#include <linux/reboot.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/slab.h>
#include <asm/reg.h>
#include <asm/uaccess.h>

1
arch/alpha/kernel/ptrace.c
Просмотреть файл

@ -11,7 +11,6 @@
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/slab.h>
#include <linux/security.h>
#include <linux/signal.h>

1
arch/alpha/kernel/smc37c669.c
Просмотреть файл

@ -3,7 +3,6 @@
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>

1
arch/alpha/kernel/smc37c93x.c
Просмотреть файл

@ -4,7 +4,6 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>

1
arch/alpha/kernel/srm_env.c
Просмотреть файл

@ -30,6 +30,7 @@
*/
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/proc_fs.h>

1
arch/alpha/mm/init.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/bootmem.h> /* max_low_pfn */
#include <linux/vmalloc.h>
#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/uaccess.h>

2
arch/arm/boot/compressed/head.S
Просмотреть файл

@ -172,7 +172,7 @@ not_angel:
adr r0, LC0
ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} )
THUMB( ldr sp, [r0, #28] )
THUMB( ldr sp, [r0, #32] )
subs r0, r0, r1 @ calculate the delta offset
@ if delta is zero, we are

1
arch/arm/common/clkdev.c
Просмотреть файл

@ -18,6 +18,7 @@
#include <linux/string.h>
#include <linux/mutex.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>

1
arch/arm/common/it8152.c
Просмотреть файл

@ -21,7 +21,6 @@
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>

38
arch/arm/include/asm/cacheflush.h
Просмотреть файл

@ -15,6 +15,7 @@
#include <asm/glue.h>
#include <asm/shmparam.h>
#include <asm/cachetype.h>
#include <asm/outercache.h>
#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
@ -219,12 +220,6 @@ struct cpu_cache_fns {
void (*dma_flush_range)(const void *, const void *);
};
struct outer_cache_fns {
void (*inv_range)(unsigned long, unsigned long);
void (*clean_range)(unsigned long, unsigned long);
void (*flush_range)(unsigned long, unsigned long);
};
/*
* Select the calling method
*/
@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *);
#endif
#ifdef CONFIG_OUTER_CACHE
extern struct outer_cache_fns outer_cache;
static inline void outer_inv_range(unsigned long start, unsigned long end)
{
if (outer_cache.inv_range)
outer_cache.inv_range(start, end);
}
static inline void outer_clean_range(unsigned long start, unsigned long end)
{
if (outer_cache.clean_range)
outer_cache.clean_range(start, end);
}
static inline void outer_flush_range(unsigned long start, unsigned long end)
{
if (outer_cache.flush_range)
outer_cache.flush_range(start, end);
}
#else
static inline void outer_inv_range(unsigned long start, unsigned long end)
{ }
static inline void outer_clean_range(unsigned long start, unsigned long end)
{ }
static inline void outer_flush_range(unsigned long start, unsigned long end)
{ }
#endif
/*
* Copy user data from/to a page which is mapped into a different
* processes address space. Really, we want to allow our "user

1
arch/arm/include/asm/clkdev.h
Просмотреть файл

@ -13,6 +13,7 @@
#define __ASM_CLKDEV_H
struct clk;
struct device;
struct clk_lookup {
struct list_head node;

1
arch/arm/include/asm/irq.h
Просмотреть файл

@ -17,6 +17,7 @@
#ifndef __ASSEMBLY__
struct irqaction;
struct pt_regs;
extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);

75
arch/arm/include/asm/outercache.h Normal file
Просмотреть файл

@ -0,0 +1,75 @@
/*
* arch/arm/include/asm/outercache.h
*
* Copyright (C) 2010 ARM Ltd.
* Written by Catalin Marinas <catalin.marinas@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_OUTERCACHE_H
#define __ASM_OUTERCACHE_H
struct outer_cache_fns {
void (*inv_range)(unsigned long, unsigned long);
void (*clean_range)(unsigned long, unsigned long);
void (*flush_range)(unsigned long, unsigned long);
#ifdef CONFIG_OUTER_CACHE_SYNC
void (*sync)(void);
#endif
};
#ifdef CONFIG_OUTER_CACHE
extern struct outer_cache_fns outer_cache;
static inline void outer_inv_range(unsigned long start, unsigned long end)
{
if (outer_cache.inv_range)
outer_cache.inv_range(start, end);
}
static inline void outer_clean_range(unsigned long start, unsigned long end)
{
if (outer_cache.clean_range)
outer_cache.clean_range(start, end);
}
static inline void outer_flush_range(unsigned long start, unsigned long end)
{
if (outer_cache.flush_range)
outer_cache.flush_range(start, end);
}
#else
static inline void outer_inv_range(unsigned long start, unsigned long end)
{ }
static inline void outer_clean_range(unsigned long start, unsigned long end)
{ }
static inline void outer_flush_range(unsigned long start, unsigned long end)
{ }
#endif
#ifdef CONFIG_OUTER_CACHE_SYNC
static inline void outer_sync(void)
{
if (outer_cache.sync)
outer_cache.sync();
}
#else
static inline void outer_sync(void)
{ }
#endif
#endif /* __ASM_OUTERCACHE_H */

16
arch/arm/include/asm/system.h
Просмотреть файл

@ -60,6 +60,8 @@
#include <linux/linkage.h>
#include <linux/irqflags.h>
#include <asm/outercache.h>
#define __exception __attribute__((section(".exception.text")))
struct thread_info;
@ -137,10 +139,12 @@ extern unsigned int user_debug;
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#endif
#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
#define mb() dmb()
#ifdef CONFIG_ARCH_HAS_BARRIERS
#include <mach/barriers.h>
#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
#define mb() do { dsb(); outer_sync(); } while (0)
#define rmb() dmb()
#define wmb() dmb()
#define wmb() mb()
#else
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
@ -152,9 +156,9 @@ extern unsigned int user_debug;
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#else
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_mb() dmb()
#define smp_rmb() dmb()
#define smp_wmb() dmb()
#endif
#define read_barrier_depends() do { } while(0)

1
arch/arm/kernel/irq.c
Просмотреть файл

@ -27,7 +27,6 @@
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/init.h>

11
arch/arm/kernel/kprobes.c
Просмотреть файл

@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/stop_machine.h>
#include <linux/stringify.h>
#include <asm/traps.h>
@ -393,6 +394,14 @@ void __kprobes jprobe_return(void)
/*
* Setup an empty pt_regs. Fill SP and PC fields as
* they're needed by longjmp_break_handler.
*
* We allocate some slack between the original SP and start of
* our fabricated regs. To be precise we want to have worst case
* covered which is STMFD with all 16 regs so we allocate 2 *
* sizeof(struct_pt_regs)).
*
* This is to prevent any simulated instruction from writing
* over the regs when they are accessing the stack.
*/
"sub sp, %0, %1 \n\t"
"ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
@ -410,7 +419,7 @@ void __kprobes jprobe_return(void)
"ldmia sp, {r0 - pc} \n\t"
:
: "r" (kcb->jprobe_saved_regs.ARM_sp),
"I" (sizeof(struct pt_regs)),
"I" (sizeof(struct pt_regs) * 2),
"J" (offsetof(struct pt_regs, ARM_sp)),
"J" (offsetof(struct pt_regs, ARM_pc)),
"J" (offsetof(struct pt_regs, ARM_cpsr))

2
arch/arm/kernel/module.c
Просмотреть файл

@ -16,9 +16,9 @@
#include <linux/mm.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/gfp.h>
#include <asm/pgtable.h>
#include <asm/sections.h>

1
arch/arm/kernel/process.c
Просмотреть файл

@ -16,7 +16,6 @@
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/delay.h>
#include <linux/reboot.h>

2
arch/arm/kernel/sys_arm.c
Просмотреть файл

@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/sem.h>
#include <linux/msg.h>
@ -27,6 +26,7 @@
#include <linux/file.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
/* Fork a new task - this creates a new program thread.
* This is called indirectly via a small wrapper

4
arch/arm/lib/memmove.S
Просмотреть файл

@ -74,7 +74,7 @@ ENTRY(memmove)
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
6: nop
6: W(nop)
W(ldr) r3, [r1, #-4]!
W(ldr) r4, [r1, #-4]!
W(ldr) r5, [r1, #-4]!
@ -85,7 +85,7 @@ ENTRY(memmove)
add pc, pc, ip
nop
nop
W(nop)
W(str) r3, [r0, #-4]!
W(str) r4, [r0, #-4]!
W(str) r5, [r0, #-4]!

1
arch/arm/lib/uaccess_with_memcpy.c
Просмотреть файл

@ -16,6 +16,7 @@
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/hardirq.h> /* for in_atomic() */
#include <linux/gfp.h>
#include <asm/current.h>
#include <asm/page.h>

1
arch/arm/mach-aaec2000/core.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/timex.h>
#include <linux/signal.h>
#include <linux/clk.h>
#include <linux/gfp.h>
#include <mach/hardware.h>
#include <asm/irq.h>

12
arch/arm/mach-at91/pm_slowclock.S
Просмотреть файл

@ -205,13 +205,25 @@ ENTRY(at91_slow_clock)
ldr r3, .saved_pllbr
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
tst r3, #(AT91_PMC_MUL & 0xff0000)
bne 1f
tst r3, #(AT91_PMC_MUL & ~0xff0000)
beq 2f
1:
wait_pllblock
2:
/* Restore PLLA setting */
ldr r3, .saved_pllar
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
tst r3, #(AT91_PMC_MUL & 0xff0000)
bne 3f
tst r3, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
4:
#ifdef SLOWDOWN_MASTER_CLOCK
/*

14
arch/arm/mach-bcmring/dma.c
Просмотреть файл

@ -28,6 +28,7 @@
#include <linux/interrupt.h>
#include <linux/irqreturn.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
#include <mach/timer.h>
@ -2220,11 +2221,15 @@ EXPORT_SYMBOL(dma_map_create_descriptor_ring);
int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
int dirtied /* non-zero if any of the pages were modified */
) {
int rc = 0;
int regionIdx;
int segmentIdx;
DMA_Region_t *region;
DMA_Segment_t *segment;
down(&memMap->lock);
for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
region = &memMap->region[regionIdx];
@ -2238,7 +2243,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
printk(KERN_ERR
"%s: vmalloc'd pages are not yet supported\n",
__func__);
return -EINVAL;
rc = -EINVAL;
goto out;
}
case DMA_MEM_TYPE_KMALLOC:
@ -2275,7 +2281,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
printk(KERN_ERR
"%s: Unsupported memory type: %d\n",
__func__, region->memType);
return -EINVAL;
rc = -EINVAL;
goto out;
}
}
@ -2313,9 +2320,10 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
memMap->numRegionsUsed = 0;
memMap->inUse = 0;
out:
up(&memMap->lock);
return 0;
return rc;
}
EXPORT_SYMBOL(dma_unmap);

1
arch/arm/mach-davinci/board-dm365-evm.c
Просмотреть файл

@ -22,6 +22,7 @@
#include <linux/leds.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/mtd/nand.h>
#include <linux/input.h>
#include <linux/spi/spi.h>

1
arch/arm/mach-davinci/dm365.c
Просмотреть файл

@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_MMCINT] = 7,
[IRQ_DM365_MMCINT1] = 7,
[IRQ_DM365_PWMINT3] = 7,
[IRQ_DDRINT] = 4,
[IRQ_AEMIFINT] = 2,
[IRQ_DM365_SDIOINT1] = 2,
[IRQ_TINT0_TINT12] = 7,

4
arch/arm/mach-davinci/dma.c
Просмотреть файл

@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <mach/edma.h>
@ -1266,7 +1267,8 @@ int edma_start(unsigned channel)
/* EDMA channel with event association */
pr_debug("EDMA: ER%d %08x\n", j,
edma_shadow0_read_array(ctlr, SH_ER, j));
/* Clear any pending error */
/* Clear any pending event or error */
edma_write_array(ctlr, EDMA_ECR, j, mask);
edma_write_array(ctlr, EDMA_EMCR, j, mask);
/* Clear any SER */
edma_shadow0_write_array(ctlr, SH_SECR, j, mask);

8
arch/arm/mach-davinci/include/mach/da8xx.h
Просмотреть файл

@ -3,7 +3,7 @@
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
* 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
* 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
@ -13,7 +13,9 @@
#include <video/da8xx-fb.h>
#include <linux/platform_device.h>
#include <linux/davinci_emac.h>
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
@ -144,6 +146,10 @@ extern const short da850_mmcsd0_pins[];
extern const short da850_nand_pins[];
extern const short da850_nor_pins[];
#ifdef CONFIG_DAVINCI_MUX
int da8xx_pinmux_setup(const short pins[]);
#else
static inline int da8xx_pinmux_setup(const short pins[]) { return 0; }
#endif
#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */

6
arch/arm/mach-davinci/time.c
Просмотреть файл

@ -253,8 +253,6 @@ static void __init timer_init(void)
irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
setup_irq(irq, &t->irqaction);
}
timer32_config(&timers[i]);
}
}
@ -331,6 +329,7 @@ static void __init davinci_timer_init(void)
unsigned int clocksource_id;
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
int i;
clockevent_id = soc_info->timer_info->clockevent_id;
clocksource_id = soc_info->timer_info->clocksource_id;
@ -389,6 +388,9 @@ static void __init davinci_timer_init(void)
clockevent_davinci.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_davinci);
for (i=0; i< ARRAY_SIZE(timers); i++)
timer32_config(&timers[i]);
}
struct sys_timer davinci_timer = {

6
arch/arm/mach-ep93xx/gpio.c
Просмотреть файл

@ -25,7 +25,7 @@
#include <mach/hardware.h>
/*************************************************************************
* GPIO handling for EP93xx
* Interrupt handling for EP93xx on-chip GPIOs
*************************************************************************/
static unsigned char gpio_int_unmasked[3];
static unsigned char gpio_int_enabled[3];
@ -40,7 +40,7 @@ static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
void ep93xx_gpio_update_int_params(unsigned port)
static void ep93xx_gpio_update_int_params(unsigned port)
{
BUG_ON(port > 2);
@ -56,7 +56,7 @@ void ep93xx_gpio_update_int_params(unsigned port)
EP93XX_GPIO_REG(int_en_register_offset[port]));
}
void ep93xx_gpio_int_mask(unsigned line)
static inline void ep93xx_gpio_int_mask(unsigned line)
{
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}

1
arch/arm/mach-h720x/common.c
Просмотреть файл

@ -14,7 +14,6 @@
*/
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mman.h>
#include <linux/init.h>
#include <linux/interrupt.h>

1
arch/arm/mach-integrator/cpu.c
Просмотреть файл

@ -13,7 +13,6 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/init.h>

1
arch/arm/mach-integrator/impd1.c
Просмотреть файл

@ -21,6 +21,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>

2
arch/arm/mach-integrator/integrator_cp.c
Просмотреть файл

@ -13,7 +13,6 @@
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
@ -21,6 +20,7 @@
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/gfp.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>

1
arch/arm/mach-integrator/pci_v3.c
Просмотреть файл

@ -22,7 +22,6 @@
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>

1
arch/arm/mach-iop13xx/pci.c
Просмотреть файл

@ -18,6 +18,7 @@
*/
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <asm/irq.h>

1
arch/arm/mach-iop32x/glantank.c
Просмотреть файл

@ -19,7 +19,6 @@
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop32x/iq31244.c
Просмотреть файл

@ -21,7 +21,6 @@
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop32x/iq80321.c
Просмотреть файл

@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop32x/n2100.c
Просмотреть файл

@ -23,7 +23,6 @@
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop33x/iq80331.c
Просмотреть файл

@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-iop33x/iq80332.c
Просмотреть файл

@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>

1
arch/arm/mach-ixp2000/enp2611.c
Просмотреть файл

@ -26,7 +26,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>

1
arch/arm/mach-ixp2000/ixdp2400.c
Просмотреть файл

@ -23,7 +23,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp2000/ixdp2800.c
Просмотреть файл

@ -23,7 +23,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp2000/ixdp2x00.c
Просмотреть файл

@ -23,7 +23,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp2000/ixdp2x01.c
Просмотреть файл

@ -23,7 +23,6 @@
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>

1
arch/arm/mach-ixp2000/pci.c
Просмотреть файл

@ -22,7 +22,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp23xx/pci.c
Просмотреть файл

@ -23,7 +23,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>

1
arch/arm/mach-ixp4xx/avila-setup.c
Просмотреть файл

@ -17,7 +17,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <linux/i2c-gpio.h>
#include <asm/types.h>
#include <asm/setup.h>

1
arch/arm/mach-ixp4xx/coyote-setup.c
Просмотреть файл

@ -14,7 +14,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>

1
arch/arm/mach-ixp4xx/gateway7001-setup.c
Просмотреть файл

@ -17,7 +17,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>

1
arch/arm/mach-ixp4xx/gtwx5715-setup.c
Просмотреть файл

@ -27,7 +27,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>

1
arch/arm/mach-ixp4xx/ixdp425-setup.c
Просмотреть файл

@ -14,7 +14,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <linux/i2c-gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>

1
arch/arm/mach-ixp4xx/ixp4xx_npe.c
Просмотреть файл

@ -20,7 +20,6 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <mach/npe.h>
#define DEBUG_MSG 0

1
arch/arm/mach-ixp4xx/wg302v2-setup.c
Просмотреть файл

@ -18,7 +18,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>

1
arch/arm/mach-kirkwood/pcie.c
Просмотреть файл

@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>

1
arch/arm/mach-lh7a40x/clcd.c
Просмотреть файл

@ -10,6 +10,7 @@
*/
#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/sysdev.h>

10
arch/arm/mach-mx3/Kconfig
Просмотреть файл

@ -62,6 +62,15 @@ config MACH_MX31_3DS
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31_3DS_MXC_NAND_USE_BBT
bool "Make the MXC NAND driver use the in flash Bad Block Table"
depends on MACH_MX31_3DS
depends on MTD_NAND_MXC
help
Enable this if you want that the MXC NAND driver uses the in flash
Bad Block Table to know what blocks are bad instead of scanning the
entire flash looking for bad block markers.
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
@ -95,6 +104,7 @@ config MACH_PCM043
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select ARCH_MX31
select MXC_ULPI if USB_ULPI
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.

5
arch/arm/mach-mx3/clock-imx31.c
Просмотреть файл

@ -468,6 +468,7 @@ static struct clk ahb_clk = {
}
DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
@ -490,7 +491,7 @@ DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk);
DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
@ -514,7 +515,6 @@ DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk)
DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@ -572,7 +572,6 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
};
int __init mx31_clocks_init(unsigned long fref)

19
arch/arm/mach-mx3/devices.c
Просмотреть файл

@ -575,11 +575,26 @@ struct platform_device imx_ssi_device1 = {
.resource = imx_ssi_resources1,
};
static int mx3_devices_init(void)
static struct resource imx_wdt_resources[] = {
{
.flags = IORESOURCE_MEM,
},
};
struct platform_device imx_wdt_device0 = {
.name = "imx-wdt",
.id = 0,
.num_resources = ARRAY_SIZE(imx_wdt_resources),
.resource = imx_wdt_resources,
};
static int __init mx3_devices_init(void)
{
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
@ -597,6 +612,8 @@ static int mx3_devices_init(void)
imx_ssi_resources0[1].end = MX35_INT_SSI1;
imx_ssi_resources1[1].start = MX35_INT_SSI2;
imx_ssi_resources1[1].end = MX35_INT_SSI2;
imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
return 0;

3
arch/arm/mach-mx3/devices.h
Просмотреть файл

@ -25,4 +25,5 @@ extern struct platform_device mxc_spi_device1;
extern struct platform_device mxc_spi_device2;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_wdt_device0;

166
arch/arm/mach-mx3/mach-armadillo5x0.c
Просмотреть файл

@ -36,6 +36,9 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -52,6 +55,8 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
#include "crm_regs.h"
@ -103,8 +108,158 @@ static int armadillo5x0_pins[] = {
/* I2C2 */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
/* OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
/* USB host 2 */
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
/* USB */
#if defined(CONFIG_USB_ULPI)
#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int usbotg_init(struct platform_device *pdev)
{
int err;
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
/* Chip already enabled by hardware */
/* OTG phy reset*/
err = gpio_request(OTG_RESET, "USB-OTG-RESET");
if (err) {
pr_err("Failed to request the usb otg reset gpio\n");
return err;
}
err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
if (err) {
pr_err("Failed to reset the usb otg phy\n");
goto otg_free_reset;
}
gpio_set_value(OTG_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(OTG_RESET, 1/*HIGH*/);
return 0;
otg_free_reset:
gpio_free(OTG_RESET);
return err;
}
static int usbh2_init(struct platform_device *pdev)
{
int err;
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
/* Enable the chip */
err = gpio_request(USBH2_CS, "USB-H2-CS");
if (err) {
pr_err("Failed to request the usb host 2 CS gpio\n");
return err;
}
err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
if (err) {
pr_err("Failed to drive the usb host 2 CS gpio\n");
goto h2_free_cs;
}
/* H2 phy reset*/
err = gpio_request(USBH2_RESET, "USB-H2-RESET");
if (err) {
pr_err("Failed to request the usb host 2 reset gpio\n");
goto h2_free_cs;
}
err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
if (err) {
pr_err("Failed to reset the usb host 2 phy\n");
goto h2_free_reset;
}
gpio_set_value(USBH2_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(USBH2_RESET, 1/*HIGH*/);
return 0;
h2_free_reset:
gpio_free(USBH2_RESET);
h2_free_cs:
gpio_free(USBH2_CS);
return err;
}
static struct mxc_usbh_platform_data usbotg_pdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct mxc_usbh_platform_data usbh2_pdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif /* CONFIG_USB_ULPI */
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
@ -393,6 +548,17 @@ static void __init armadillo5x0_init(void)
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
/* USB */
#if defined(CONFIG_USB_ULPI)
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_otg_host, &usbotg_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
}
static void __init armadillo5x0_timer_init(void)

116
arch/arm/mach-mx3/mach-mx31_3ds.c
Просмотреть файл

@ -23,6 +23,9 @@
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/platform_device.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -31,26 +34,96 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
#include <mach/board-mx31pdk.h>
#include <mach/board-mx31_3ds.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/mxc_nand.h>
#include <mach/spi.h>
#include "devices.h"
/*!
* @file mx31pdk.c
* @file mx31_3ds.c
*
* @brief This file contains the board-specific initialization routines.
*
* @ingroup System
*/
static int mx31pdk_pins[] = {
static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
/* SPI 1 */
MX31_PIN_CSPI2_SCLK__SCLK,
MX31_PIN_CSPI2_MOSI__MOSI,
MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS0__SS0,
MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
/* MC13783 IRQ */
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
};
/* Regulators */
static struct regulator_init_data pwgtx_init = {
.constraints = {
.boot_on = 1,
.always_on = 1,
},
};
static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
{
.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
.init_data = &pwgtx_init,
}, {
.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
.init_data = &pwgtx_init,
},
};
/* MC13783 */
static struct mc13783_platform_data mc13783_pdata __initdata = {
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
.flags = MC13783_USE_REGULATOR,
};
/* SPI */
static int spi1_internal_chipselect[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(2),
};
static struct spi_imx_master spi1_pdata = {
.chipselect = spi1_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
};
static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
{
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 1, /* SS2 */
.platform_data = &mc13783_pdata,
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
.mode = SPI_CS_HIGH,
},
};
/*
* NAND Flash
*/
static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
.width = 1,
.hw_ecc = 1,
#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
.flash_bbt = 1,
#endif
};
static struct imxuart_platform_data uart_pdata = {
@ -95,7 +168,7 @@ static struct platform_device smsc911x_device = {
* LEDs, switches, interrupts for Ethernet.
*/
static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
{
uint32_t imr_val;
uint32_t int_valid;
@ -163,7 +236,7 @@ static struct irq_chip expio_irq_chip = {
.unmask = expio_unmask_irq,
};
static int __init mx31pdk_init_expio(void)
static int __init mx31_3ds_init_expio(void)
{
int i;
int ret;
@ -176,7 +249,7 @@ static int __init mx31pdk_init_expio(void)
return -ENODEV;
}
pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
__raw_readw(CPLD_CODE_VER_REG));
/*
@ -201,7 +274,7 @@ static int __init mx31pdk_init_expio(void)
set_irq_flags(i, IRQF_VALID);
}
set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
return 0;
}
@ -209,7 +282,7 @@ static int __init mx31pdk_init_expio(void)
/*
* This structure defines the MX31 memory map.
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
static struct map_desc mx31_3ds_io_desc[] __initdata = {
{
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
@ -221,10 +294,10 @@ static struct map_desc mx31pdk_io_desc[] __initdata = {
/*
* Set up static virtual mappings.
*/
static void __init mx31pdk_map_io(void)
static void __init mx31_3ds_map_io(void)
{
mx31_map_io();
iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
}
/*!
@ -232,35 +305,40 @@ static void __init mx31pdk_map_io(void)
*/
static void __init mxc_board_init(void)
{
mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
"mx31pdk");
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
"mx31_3ds");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
if (!mx31pdk_init_expio())
mxc_register_device(&mxc_spi_device1, &spi1_pdata);
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
if (!mx31_3ds_init_expio())
platform_device_register(&smsc911x_device);
}
static void __init mx31pdk_timer_init(void)
static void __init mx31_3ds_timer_init(void)
{
mx31_clocks_init(26000000);
}
static struct sys_timer mx31pdk_timer = {
.init = mx31pdk_timer_init,
static struct sys_timer mx31_3ds_timer = {
.init = mx31_3ds_timer_init,
};
/*
* The following uses standard kernel macros defined in arch.h in order to
* initialize __mach_desc_MX31PDK data structure.
* initialize __mach_desc_MX31_3DS data structure.
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
.map_io = mx31_3ds_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
.timer = &mx31_3ds_timer,
MACHINE_END

1
arch/arm/mach-mx3/mach-mx31moboard.c
Просмотреть файл

@ -19,6 +19,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>

2
arch/arm/mach-mx3/mach-pcm037.c
Просмотреть файл

@ -35,7 +35,7 @@
#include <linux/can/platform/sja1000.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/fsl_devices.h>
#include <linux/gfp.h>
#include <media/soc_camera.h>

2
arch/arm/mach-mx3/mx31lite-db.c
Просмотреть файл

@ -28,7 +28,6 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
@ -206,5 +205,6 @@ void __init mx31lite_db_init(void)
mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
mxc_register_device(&mxc_spi_device0, &spi0_pdata);
platform_device_register(&litekit_led_device);
mxc_register_device(&imx_wdt_device0, NULL);
}

1
arch/arm/mach-mx3/mx31moboard-devboard.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/usb/otg.h>

1
arch/arm/mach-mx3/mx31moboard-marxbot.c
Просмотреть файл

@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/types.h>

2
arch/arm/mach-mx5/clock-mx51.c
Просмотреть файл

@ -757,7 +757,7 @@ DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
/* GPT */
DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
NULL, NULL, &ipg_perclk, NULL);
NULL, NULL, &ipg_clk, NULL);
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_clk, NULL);

53
arch/arm/mach-mx5/cpu.c
Просмотреть файл

@ -14,9 +14,62 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <asm/io.h>
static int cpu_silicon_rev = -1;
#define SI_REV 0x48
static void query_silicon_parameter(void)
{
void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE);
u32 rev;
if (!rom) {
cpu_silicon_rev = -EINVAL;
return;
}
rev = readl(rom + SI_REV);
switch (rev) {
case 0x1:
cpu_silicon_rev = MX51_CHIP_REV_1_0;
break;
case 0x2:
cpu_silicon_rev = MX51_CHIP_REV_1_1;
break;
case 0x10:
cpu_silicon_rev = MX51_CHIP_REV_2_0;
break;
case 0x20:
cpu_silicon_rev = MX51_CHIP_REV_3_0;
break;
default:
cpu_silicon_rev = 0;
}
iounmap(rom);
}
/*
* Returns:
* the silicon revision of the cpu
* -EINVAL - not a mx51
*/
int mx51_revision(void)
{
if (!cpu_is_mx51())
return -EINVAL;
if (cpu_silicon_rev == -1)
query_silicon_parameter();
return cpu_silicon_rev;
}
EXPORT_SYMBOL(mx51_revision);
static int __init post_cpu_init(void)
{
unsigned int reg;

32
arch/arm/mach-mx5/mm.c
Просмотреть файл

@ -34,11 +34,6 @@ static struct map_desc mxc_io_desc[] __initdata = {
.pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
.length = MX51_DEBUG_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_TZIC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
.length = MX51_TZIC_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
@ -54,11 +49,6 @@ static struct map_desc mxc_io_desc[] __initdata = {
.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
.length = MX51_AIPS2_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
.length = MX51_NFC_AXI_SIZE,
.type = MT_DEVICE
},
};
@ -69,14 +59,6 @@ static struct map_desc mxc_io_desc[] __initdata = {
*/
void __init mx51_map_io(void)
{
u32 tzic_addr;
if (mx51_revision() < MX51_CHIP_REV_2_0)
tzic_addr = 0x8FFFC000;
else
tzic_addr = 0xE0003000;
mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr);
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
@ -85,5 +67,17 @@ void __init mx51_map_io(void)
void __init mx51_init_irq(void)
{
tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
unsigned long tzic_addr;
void __iomem *tzic_virt;
if (mx51_revision() < MX51_CHIP_REV_2_0)
tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
else
tzic_addr = MX51_TZIC_BASE_ADDR;
tzic_virt = ioremap(tzic_addr, SZ_16K);
if (!tzic_virt)
panic("unable to map TZIC interrupt controller\n");
tzic_init_irq(tzic_virt);
}

1
arch/arm/mach-netx/fb.c
Просмотреть файл

@ -23,6 +23,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/err.h>
#include <linux/gfp.h>
#include <asm/irq.h>

1
arch/arm/mach-netx/xc.c
Просмотреть файл

@ -21,6 +21,7 @@
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <mach/hardware.h>

1
arch/arm/mach-nomadik/gpio.c
Просмотреть файл

@ -19,6 +19,7 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/gpio.h>

1
arch/arm/mach-ns9xxx/plat-serial8250.c
Просмотреть файл

@ -10,6 +10,7 @@
*/
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <mach/regs-board-a9m9750dev.h>
#include <mach/board.h>

1
arch/arm/mach-ns9xxx/processor-ns9360.c
Просмотреть файл

@ -10,7 +10,6 @@
*/
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <asm/page.h>
#include <asm/mach/map.h>

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше