diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 48155be5db7f..2c7bdb81d30c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2399,6 +2399,10 @@ struct cfg80211_qos_map {
  * @set_power_mgmt: Configure WLAN power management. A timeout value of -1
  *	allows the driver to adjust the dynamic ps timeout value.
  * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold.
+ *	After configuration, the driver should (soon) send an event indicating
+ *	the current level is above/below the configured threshold; this may
+ *	need some care when the configuration is changed (without first being
+ *	disabled.)
  * @set_cqm_txe_config: Configure connection quality monitor TX error
  *	thresholds.
  * @sched_scan_start: Tell the driver to start a scheduled scan.
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4b9dd070aeb9..82045fca388b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -482,7 +482,9 @@ struct ieee80211_event {
  *	Note that with TDLS this can be the case (channel is HT, protection must
  *	be used from this field) even when the BSS association isn't using HT.
  * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
- *	implies disabled
+ *	implies disabled. As with the cfg80211 callback, a change here should
+ *	cause an event to be sent indicating where the current value is in
+ *	relation to the newly configured threshold.
  * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
  * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
  *	may filter ARP queries targeted for other addresses than listed here.
@@ -3170,18 +3172,24 @@ enum ieee80211_reconfig_type {
  *	The callback is optional and can sleep.
  *
  * @add_chanctx: Notifies device driver about new channel context creation.
+ *	This callback may sleep.
  * @remove_chanctx: Notifies device driver about channel context destruction.
+ *	This callback may sleep.
  * @change_chanctx: Notifies device driver about channel context changes that
  *	may happen when combining different virtual interfaces on the same
  *	channel context with different settings
+ *	This callback may sleep.
  * @assign_vif_chanctx: Notifies device driver about channel context being bound
  *	to vif. Possible use is for hw queue remapping.
+ *	This callback may sleep.
  * @unassign_vif_chanctx: Notifies device driver about channel context being
  *	unbound from vif.
+ *	This callback may sleep.
  * @switch_vif_chanctx: switch a number of vifs from one chanctx to
  *	another, as specified in the list of
  *	@ieee80211_vif_chanctx_switch passed to the driver, according
  *	to the mode defined in &ieee80211_chanctx_switch_mode.
+ *	This callback may sleep.
  *
  * @start_ap: Start operation on the AP interface, this is called after all the
  *	information in bss_conf is set and beacon can be retrieved. A channel
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 713cdbf6fb3c..c2bd1b6a6922 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2010,12 +2010,12 @@ ieee80211_sched_scan_start(struct wiphy *wiphy,
 static int
 ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = wiphy_priv(wiphy);
 
-	if (!sdata->local->ops->sched_scan_stop)
+	if (!local->ops->sched_scan_stop)
 		return -EOPNOTSUPP;
 
-	return ieee80211_request_sched_scan_stop(sdata);
+	return ieee80211_request_sched_scan_stop(local);
 }
 
 static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
diff --git a/net/mac80211/driver-ops.c b/net/mac80211/driver-ops.c
index a1d54318f16c..ca1fe5576103 100644
--- a/net/mac80211/driver-ops.c
+++ b/net/mac80211/driver-ops.c
@@ -1,4 +1,6 @@
 /*
+ * Copyright 2015 Intel Deutschland GmbH
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -8,6 +10,48 @@
 #include "trace.h"
 #include "driver-ops.h"
 
+int drv_start(struct ieee80211_local *local)
+{
+	int ret;
+
+	might_sleep();
+
+	if (WARN_ON(local->started))
+		return -EALREADY;
+
+	trace_drv_start(local);
+	local->started = true;
+	/* allow rx frames */
+	smp_mb();
+	ret = local->ops->start(&local->hw);
+	trace_drv_return_int(local, ret);
+
+	if (ret)
+		local->started = false;
+
+	return ret;
+}
+
+void drv_stop(struct ieee80211_local *local)
+{
+	might_sleep();
+
+	if (WARN_ON(!local->started))
+		return;
+
+	trace_drv_stop(local);
+	local->ops->stop(&local->hw);
+	trace_drv_return_void(local);
+
+	/* sync away all work on the tasklet before clearing started */
+	tasklet_disable(&local->tasklet);
+	tasklet_enable(&local->tasklet);
+
+	barrier();
+
+	local->started = false;
+}
+
 int drv_add_interface(struct ieee80211_local *local,
 		      struct ieee80211_sub_if_data *sdata)
 {
@@ -192,6 +236,8 @@ int drv_switch_vif_chanctx(struct ieee80211_local *local,
 	int ret = 0;
 	int i;
 
+	might_sleep();
+
 	if (!local->ops->switch_vif_chanctx)
 		return -EOPNOTSUPP;
 
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 30987099eb8f..154ce4b13406 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -66,36 +66,8 @@ static inline int drv_get_et_sset_count(struct ieee80211_sub_if_data *sdata,
 	return rv;
 }
 
-static inline int drv_start(struct ieee80211_local *local)
-{
-	int ret;
-
-	might_sleep();
-
-	trace_drv_start(local);
-	local->started = true;
-	smp_mb();
-	ret = local->ops->start(&local->hw);
-	trace_drv_return_int(local, ret);
-	return ret;
-}
-
-static inline void drv_stop(struct ieee80211_local *local)
-{
-	might_sleep();
-
-	trace_drv_stop(local);
-	local->ops->stop(&local->hw);
-	trace_drv_return_void(local);
-
-	/* sync away all work on the tasklet before clearing started */
-	tasklet_disable(&local->tasklet);
-	tasklet_enable(&local->tasklet);
-
-	barrier();
-
-	local->started = false;
-}
+int drv_start(struct ieee80211_local *local);
+void drv_stop(struct ieee80211_local *local);
 
 #ifdef CONFIG_PM
 static inline int drv_suspend(struct ieee80211_local *local,
@@ -871,6 +843,8 @@ static inline int drv_add_chanctx(struct ieee80211_local *local,
 {
 	int ret = -EOPNOTSUPP;
 
+	might_sleep();
+
 	trace_drv_add_chanctx(local, ctx);
 	if (local->ops->add_chanctx)
 		ret = local->ops->add_chanctx(&local->hw, &ctx->conf);
@@ -884,6 +858,8 @@ static inline int drv_add_chanctx(struct ieee80211_local *local,
 static inline void drv_remove_chanctx(struct ieee80211_local *local,
 				      struct ieee80211_chanctx *ctx)
 {
+	might_sleep();
+
 	if (WARN_ON(!ctx->driver_present))
 		return;
 
@@ -898,6 +874,8 @@ static inline void drv_change_chanctx(struct ieee80211_local *local,
 				      struct ieee80211_chanctx *ctx,
 				      u32 changed)
 {
+	might_sleep();
+
 	trace_drv_change_chanctx(local, ctx, changed);
 	if (local->ops->change_chanctx) {
 		WARN_ON_ONCE(!ctx->driver_present);
@@ -931,6 +909,8 @@ static inline void drv_unassign_vif_chanctx(struct ieee80211_local *local,
 					    struct ieee80211_sub_if_data *sdata,
 					    struct ieee80211_chanctx *ctx)
 {
+	might_sleep();
+
 	if (!check_sdata_in_driver(sdata))
 		return;
 
@@ -953,6 +933,8 @@ static inline int drv_start_ap(struct ieee80211_local *local,
 {
 	int ret = 0;
 
+	might_sleep();
+
 	if (!check_sdata_in_driver(sdata))
 		return -EIO;
 
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 2001555d49cb..337bb5d78003 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -188,7 +188,7 @@ ieee80211_ibss_build_presp(struct ieee80211_sub_if_data *sdata,
 		 * keep them at 0
 		 */
 		pos = ieee80211_ie_build_ht_oper(pos, &sband->ht_cap,
-						 chandef, 0);
+						 chandef, 0, false);
 
 		/* add VHT capability and information IEs */
 		if (chandef->width != NL80211_CHAN_WIDTH_20 &&
@@ -356,7 +356,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
 	else
 		sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
 
-	ieee80211_set_wmm_default(sdata, true);
+	ieee80211_set_wmm_default(sdata, true, false);
 
 	sdata->vif.bss_conf.ibss_joined = true;
 	sdata->vif.bss_conf.ibss_creator = creator;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 62f2a97cd2a6..d832bd59236b 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1573,7 +1573,7 @@ __ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
 				     struct cfg80211_sched_scan_request *req);
 int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
 				       struct cfg80211_sched_scan_request *req);
-int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata);
+int ieee80211_request_sched_scan_stop(struct ieee80211_local *local);
 void ieee80211_sched_scan_end(struct ieee80211_local *local);
 void ieee80211_sched_scan_stopped_work(struct work_struct *work);
 
@@ -1769,7 +1769,7 @@ int ieee80211_frame_duration(enum ieee80211_band band, size_t len,
 			     int rate, int erp, int short_preamble,
 			     int shift);
 void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
-			       bool bss_notify);
+			       bool bss_notify, bool enable_qos);
 void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
 		    struct sta_info *sta, struct sk_buff *skb);
 
@@ -1962,7 +1962,7 @@ u8 *ieee80211_ie_build_ht_cap(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			      u16 cap);
 u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			       const struct cfg80211_chan_def *chandef,
-			       u16 prot_mode);
+			       u16 prot_mode, bool rifs_mode);
 u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
 			       u32 cap);
 u8 *ieee80211_ie_build_vht_oper(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index f848c75518a2..d0dc1bfaeec2 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -661,11 +661,13 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
 		}
 
 		/*
-		 * set default queue parameters so drivers don't
+		 * Set default queue parameters so drivers don't
 		 * need to initialise the hardware if the hardware
-		 * doesn't start up with sane defaults
+		 * doesn't start up with sane defaults.
+		 * Enable QoS for anything but station interfaces.
 		 */
-		ieee80211_set_wmm_default(sdata, true);
+		ieee80211_set_wmm_default(sdata, true,
+			sdata->vif.type != NL80211_IFTYPE_STATION);
 	}
 
 	set_bit(SDATA_STATE_RUNNING, &sdata->state);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 273c96de4910..858f6b1cb149 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -281,7 +281,7 @@ void ieee80211_restart_hw(struct ieee80211_hw *hw)
 	local->in_reconfig = true;
 	barrier();
 
-	schedule_work(&local->restart_work);
+	queue_work(system_freezable_wq, &local->restart_work);
 }
 EXPORT_SYMBOL(ieee80211_restart_hw);
 
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 626e8de70842..fa28500f28fd 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -466,7 +466,8 @@ int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata,
 
 	pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
 	ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef,
-				   sdata->vif.bss_conf.ht_operation_mode);
+				   sdata->vif.bss_conf.ht_operation_mode,
+				   false);
 
 	return 0;
 }
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index c1f889270484..bd3d55eb21d4 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -686,6 +686,9 @@ static bool llid_in_use(struct ieee80211_sub_if_data *sdata,
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(sta, &local->sta_list, list) {
+		if (sdata != sta->sdata)
+			continue;
+
 		if (!memcmp(&sta->mesh->llid, &llid, sizeof(llid))) {
 			in_use = true;
 			break;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ded4b976bb48..b140cc6651f4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1744,10 +1744,10 @@ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
 				     struct ieee80211_sub_if_data *sdata,
 				     const u8 *wmm_param, size_t wmm_param_len)
 {
-	struct ieee80211_tx_queue_params params;
+	struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	size_t left;
-	int count;
+	int count, ac;
 	const u8 *pos;
 	u8 uapsd_queues = 0;
 
@@ -1781,25 +1781,24 @@ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
 		int aci = (pos[0] >> 5) & 0x03;
 		int acm = (pos[0] >> 4) & 0x01;
 		bool uapsd = false;
-		int queue;
 
 		switch (aci) {
 		case 1: /* AC_BK */
-			queue = 3;
+			ac = IEEE80211_AC_BK;
 			if (acm)
 				sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
 				uapsd = true;
 			break;
 		case 2: /* AC_VI */
-			queue = 1;
+			ac = IEEE80211_AC_VI;
 			if (acm)
 				sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
 				uapsd = true;
 			break;
 		case 3: /* AC_VO */
-			queue = 0;
+			ac = IEEE80211_AC_VO;
 			if (acm)
 				sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
@@ -1807,7 +1806,7 @@ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
 			break;
 		case 0: /* AC_BE */
 		default:
-			queue = 2;
+			ac = IEEE80211_AC_BE;
 			if (acm)
 				sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
 			if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
@@ -1815,25 +1814,41 @@ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
 			break;
 		}
 
-		params.aifs = pos[0] & 0x0f;
-		params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
-		params.cw_min = ecw2cw(pos[1] & 0x0f);
-		params.txop = get_unaligned_le16(pos + 2);
-		params.acm = acm;
-		params.uapsd = uapsd;
+		params[ac].aifs = pos[0] & 0x0f;
 
+		if (params[ac].aifs < 2) {
+			sdata_info(sdata,
+				   "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
+				   params[ac].aifs, aci);
+			params[ac].aifs = 2;
+		}
+		params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
+		params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
+		params[ac].txop = get_unaligned_le16(pos + 2);
+		params[ac].acm = acm;
+		params[ac].uapsd = uapsd;
+
+		if (params[ac].cw_min > params[ac].cw_max) {
+			sdata_info(sdata,
+				   "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
+				   params[ac].cw_min, params[ac].cw_max, aci);
+			return false;
+		}
+	}
+
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		mlme_dbg(sdata,
-			 "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
-			 queue, aci, acm,
-			 params.aifs, params.cw_min, params.cw_max,
-			 params.txop, params.uapsd,
-			 ifmgd->tx_tspec[queue].downgraded);
-		sdata->tx_conf[queue] = params;
-		if (!ifmgd->tx_tspec[queue].downgraded &&
-		    drv_conf_tx(local, sdata, queue, &params))
+			 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
+			 ac, params[ac].acm,
+			 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
+			 params[ac].txop, params[ac].uapsd,
+			 ifmgd->tx_tspec[ac].downgraded);
+		sdata->tx_conf[ac] = params[ac];
+		if (!ifmgd->tx_tspec[ac].downgraded &&
+		    drv_conf_tx(local, sdata, ac, &params[ac]))
 			sdata_err(sdata,
-				  "failed to set TX queue parameters for queue %d\n",
-				  queue);
+				  "failed to set TX queue parameters for AC %d\n",
+				  ac);
 	}
 
 	/* enable WMM or activate new settings */
@@ -2077,7 +2092,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	/* disassociated - set to defaults now */
-	ieee80211_set_wmm_default(sdata, false);
+	ieee80211_set_wmm_default(sdata, false, false);
 
 	del_timer_sync(&sdata->u.mgd.conn_mon_timer);
 	del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
@@ -3044,11 +3059,21 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	 */
 	ifmgd->wmm_last_param_set = -1;
 
-	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && elems.wmm_param)
-		ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
-					 elems.wmm_param_len);
-	else
-		ieee80211_set_wmm_default(sdata, false);
+	if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
+		ieee80211_set_wmm_default(sdata, false, false);
+	} else if (!ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
+					     elems.wmm_param_len)) {
+		/* still enable QoS since we might have HT/VHT */
+		ieee80211_set_wmm_default(sdata, false, true);
+		/* set the disable-WMM flag in this case to disable
+		 * tracking WMM parameter changes in the beacon if
+		 * the parameters weren't actually valid. Doing so
+		 * avoids changing parameters very strangely when
+		 * the AP is going back and forth between valid and
+		 * invalid parameters.
+		 */
+		ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
+	}
 	changed |= BSS_CHANGED_QOS;
 
 	/* set AID and assoc capability,
@@ -4543,44 +4568,6 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
 	return err;
 }
 
-static bool ieee80211_usable_wmm_params(struct ieee80211_sub_if_data *sdata,
-					const u8 *wmm_param, int len)
-{
-	const u8 *pos;
-	size_t left;
-
-	if (len < 8)
-		return false;
-
-	if (wmm_param[5] != 1 /* version */)
-		return false;
-
-	pos = wmm_param + 8;
-	left = len - 8;
-
-	for (; left >= 4; left -= 4, pos += 4) {
-		u8 aifsn = pos[0] & 0x0f;
-		u8 ecwmin = pos[1] & 0x0f;
-		u8 ecwmax = (pos[1] & 0xf0) >> 4;
-		int aci = (pos[0] >> 5) & 0x03;
-
-		if (aifsn < 2) {
-			sdata_info(sdata,
-				   "AP has invalid WMM params (AIFSN=%d for ACI %d), disabling WMM\n",
-				   aifsn, aci);
-			return false;
-		}
-		if (ecwmin > ecwmax) {
-			sdata_info(sdata,
-				   "AP has invalid WMM params (ECWmin/max=%d/%d for ACI %d), disabling WMM\n",
-				   ecwmin, ecwmax, aci);
-			return false;
-		}
-	}
-
-	return true;
-}
-
 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 			struct cfg80211_assoc_request *req)
 {
@@ -4645,39 +4632,6 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 
 	assoc_data->wmm = bss->wmm_used &&
 			  (local->hw.queues >= IEEE80211_NUM_ACS);
-	if (assoc_data->wmm) {
-		/* try to check validity of WMM params IE */
-		const struct cfg80211_bss_ies *ies;
-		const u8 *wp, *start, *end;
-
-		rcu_read_lock();
-		ies = rcu_dereference(req->bss->ies);
-		start = ies->data;
-		end = start + ies->len;
-
-		while (true) {
-			wp = cfg80211_find_vendor_ie(
-				WLAN_OUI_MICROSOFT,
-				WLAN_OUI_TYPE_MICROSOFT_WMM,
-				start, end - start);
-			if (!wp)
-				break;
-			start = wp + wp[1] + 2;
-			/* if this IE is too short, try the next */
-			if (wp[1] <= 4)
-				continue;
-			/* if this IE is WMM params, we found what we wanted */
-			if (wp[6] == 1)
-				break;
-		}
-
-		if (!wp || !ieee80211_usable_wmm_params(sdata, wp + 2,
-							wp[1] - 2)) {
-			assoc_data->wmm = false;
-			ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
-		}
-		rcu_read_unlock();
-	}
 
 	/*
 	 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
@@ -4936,6 +4890,25 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
 		return 0;
 	}
 
+	if (ifmgd->assoc_data &&
+	    ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) {
+		sdata_info(sdata,
+			   "aborting association with %pM by local choice (Reason: %u=%s)\n",
+			   req->bssid, req->reason_code,
+			   ieee80211_get_reason_code_string(req->reason_code));
+
+		drv_mgd_prepare_tx(sdata->local, sdata);
+		ieee80211_send_deauth_disassoc(sdata, req->bssid,
+					       IEEE80211_STYPE_DEAUTH,
+					       req->reason_code, tx,
+					       frame_buf);
+		ieee80211_destroy_assoc_data(sdata, false);
+		ieee80211_report_disconnect(sdata, frame_buf,
+					    sizeof(frame_buf), true,
+					    req->reason_code);
+		return 0;
+	}
+
 	if (ifmgd->associated &&
 	    ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
 		sdata_info(sdata,
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index ad88ad4e8eb1..00a43a70e1fc 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -6,6 +6,13 @@
 #include "driver-ops.h"
 #include "led.h"
 
+static void ieee80211_sched_scan_cancel(struct ieee80211_local *local)
+{
+	if (ieee80211_request_sched_scan_stop(local))
+		return;
+	cfg80211_sched_scan_stopped_rtnl(local->hw.wiphy);
+}
+
 int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
@@ -34,6 +41,10 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
 		mutex_unlock(&local->sta_mtx);
 	}
 
+	/* keep sched_scan only in case of 'any' trigger */
+	if (!(wowlan && wowlan->any))
+		ieee80211_sched_scan_cancel(local);
+
 	ieee80211_stop_queues_by_reason(hw,
 					IEEE80211_MAX_QUEUE_MAP,
 					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index b07e2f748f93..a4e2f4e67f94 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -307,7 +307,7 @@ static void __rate_control_send_low(struct ieee80211_hw *hw,
 	}
 	WARN_ONCE(i == sband->n_bitrates,
 		  "no supported rates (0x%x) in rate_mask 0x%x with flags 0x%x\n",
-		  sta ? sta->supp_rates[sband->band] : 0,
+		  sta ? sta->supp_rates[sband->band] : -1,
 		  rate_mask, rate_flags);
 
 	info->control.rates[0].count =
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index b64fd2b2d95a..4aeca4b0c3cb 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -1140,10 +1140,10 @@ int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
 	return ret;
 }
 
-int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
+int ieee80211_request_sched_scan_stop(struct ieee80211_local *local)
 {
-	struct ieee80211_local *local = sdata->local;
-	int ret = 0;
+	struct ieee80211_sub_if_data *sched_scan_sdata;
+	int ret = -ENOENT;
 
 	mutex_lock(&local->mtx);
 
@@ -1155,8 +1155,10 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
 	/* We don't want to restart sched scan anymore. */
 	RCU_INIT_POINTER(local->sched_scan_req, NULL);
 
-	if (rcu_access_pointer(local->sched_scan_sdata)) {
-		ret = drv_sched_scan_stop(local, sdata);
+	sched_scan_sdata = rcu_dereference_protected(local->sched_scan_sdata,
+						lockdep_is_held(&local->mtx));
+	if (sched_scan_sdata) {
+		ret = drv_sched_scan_stop(local, sched_scan_sdata);
 		if (!ret)
 			RCU_INIT_POINTER(local->sched_scan_sdata, NULL);
 	}
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index ecc5e2a8f80b..c9eeb3f12808 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -591,12 +591,19 @@ ieee80211_tdls_add_setup_cfm_ies(struct ieee80211_sub_if_data *sdata,
 		offset = noffset;
 	}
 
-	/* if HT support is only added in TDLS, we need an HT-operation IE */
+	/*
+	 * if HT support is only added in TDLS, we need an HT-operation IE.
+	 * add the IE as required by IEEE802.11-2012 9.23.3.2.
+	 */
 	if (!ap_sta->sta.ht_cap.ht_supported && sta->sta.ht_cap.ht_supported) {
+		u16 prot = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED |
+			   IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT |
+			   IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT;
+
 		pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
-		/* send an empty HT operation IE */
 		ieee80211_ie_build_ht_oper(pos, &sta->sta.ht_cap,
-					   &sdata->vif.bss_conf.chandef, 0);
+					   &sdata->vif.bss_conf.chandef, prot,
+					   true);
 	}
 
 	ieee80211_tdls_add_link_ie(sdata, skb, peer, initiator);
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 5cf8f4ea077f..56c6d6cfa5a1 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -33,11 +33,11 @@
 			__field(u32, chan_width)					\
 			__field(u32, center_freq1)					\
 			__field(u32, center_freq2)
-#define CHANDEF_ASSIGN(c)								\
-			__entry->control_freq = (c)->chan ? (c)->chan->center_freq : 0;	\
-			__entry->chan_width = (c)->width;				\
-			__entry->center_freq1 = (c)->center_freq1;			\
-			__entry->center_freq2 = (c)->center_freq2;
+#define CHANDEF_ASSIGN(c)							\
+			__entry->control_freq = (c) ? ((c)->chan ? (c)->chan->center_freq : 0) : 0;	\
+			__entry->chan_width = (c) ? (c)->width : 0;			\
+			__entry->center_freq1 = (c) ? (c)->center_freq1 : 0;		\
+			__entry->center_freq2 = (c) ? (c)->center_freq2 : 0;
 #define CHANDEF_PR_FMT	" control:%d MHz width:%d center: %d/%d MHz"
 #define CHANDEF_PR_ARG	__entry->control_freq, __entry->chan_width,			\
 			__entry->center_freq1, __entry->center_freq2
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 8274c86296f9..74058020b7d6 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -4,6 +4,7 @@
  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
  * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
+ * Copyright (C) 2015	Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -1104,13 +1105,13 @@ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 }
 
 void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
-			       bool bss_notify)
+			       bool bss_notify, bool enable_qos)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_tx_queue_params qparam;
 	struct ieee80211_chanctx_conf *chanctx_conf;
 	int ac;
-	bool use_11b, enable_qos;
+	bool use_11b;
 	bool is_ocb; /* Use another EDCA parameters if dot11OCBActivated=true */
 	int aCWmin, aCWmax;
 
@@ -1129,13 +1130,6 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata,
 		 !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE);
 	rcu_read_unlock();
 
-	/*
-	 * By default disable QoS in STA mode for old access points, which do
-	 * not support 802.11e. New APs will provide proper queue parameters,
-	 * that we will configure later.
-	 */
-	enable_qos = (sdata->vif.type != NL80211_IFTYPE_STATION);
-
 	is_ocb = (sdata->vif.type == NL80211_IFTYPE_OCB);
 
 	/* Set defaults according to 802.11-2007 Table 7-37 */
@@ -1664,7 +1658,6 @@ static void ieee80211_handle_reconfig_failure(struct ieee80211_local *local)
 
 	local->resuming = false;
 	local->suspended = false;
-	local->started = false;
 	local->in_reconfig = false;
 
 	/* scheduled scan clearly can't be running any more, but tell
@@ -1753,6 +1746,18 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	}
 #endif
 
+	/*
+	 * In case of hw_restart during suspend (without wowlan),
+	 * cancel restart work, as we are reconfiguring the device
+	 * anyway.
+	 * Note that restart_work is scheduled on a frozen workqueue,
+	 * so we can't deadlock in this case.
+	 */
+	if (suspended && local->in_reconfig && !reconfig_due_to_wowlan)
+		cancel_work_sync(&local->restart_work);
+
+	local->started = false;
+
 	/*
 	 * Upon resume hardware can sometimes be goofy due to
 	 * various platform / driver / bus issues, so restarting
@@ -1996,6 +2001,29 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		if (ieee80211_sdata_running(sdata))
 			ieee80211_enable_keys(sdata);
 
+	/* Reconfigure sched scan if it was interrupted by FW restart */
+	mutex_lock(&local->mtx);
+	sched_scan_sdata = rcu_dereference_protected(local->sched_scan_sdata,
+						lockdep_is_held(&local->mtx));
+	sched_scan_req = rcu_dereference_protected(local->sched_scan_req,
+						lockdep_is_held(&local->mtx));
+	if (sched_scan_sdata && sched_scan_req)
+		/*
+		 * Sched scan stopped, but we don't want to report it. Instead,
+		 * we're trying to reschedule. However, if more than one scan
+		 * plan was set, we cannot reschedule since we don't know which
+		 * scan plan was currently running (and some scan plans may have
+		 * already finished).
+		 */
+		if (sched_scan_req->n_scan_plans > 1 ||
+		    __ieee80211_request_sched_scan_start(sched_scan_sdata,
+							 sched_scan_req))
+			sched_scan_stopped = true;
+	mutex_unlock(&local->mtx);
+
+	if (sched_scan_stopped)
+		cfg80211_sched_scan_stopped_rtnl(local->hw.wiphy);
+
  wake_up:
 	local->in_reconfig = false;
 	barrier();
@@ -2030,32 +2058,6 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
 					false);
 
-	/*
-	 * Reconfigure sched scan if it was interrupted by FW restart or
-	 * suspend.
-	 */
-	mutex_lock(&local->mtx);
-	sched_scan_sdata = rcu_dereference_protected(local->sched_scan_sdata,
-						lockdep_is_held(&local->mtx));
-	sched_scan_req = rcu_dereference_protected(local->sched_scan_req,
-						lockdep_is_held(&local->mtx));
-	if (sched_scan_sdata && sched_scan_req)
-		/*
-		 * Sched scan stopped, but we don't want to report it. Instead,
-		 * we're trying to reschedule. However, if more than one scan
-		 * plan was set, we cannot reschedule since we don't know which
-		 * scan plan was currently running (and some scan plans may have
-		 * already finished).
-		 */
-		if (sched_scan_req->n_scan_plans > 1 ||
-		    __ieee80211_request_sched_scan_start(sched_scan_sdata,
-							 sched_scan_req))
-			sched_scan_stopped = true;
-	mutex_unlock(&local->mtx);
-
-	if (sched_scan_stopped)
-		cfg80211_sched_scan_stopped_rtnl(local->hw.wiphy);
-
 	/*
 	 * If this is for hw restart things are still running.
 	 * We may want to change that later, however.
@@ -2140,7 +2142,13 @@ void ieee80211_recalc_smps(struct ieee80211_sub_if_data *sdata)
 	chanctx_conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
 					lockdep_is_held(&local->chanctx_mtx));
 
-	if (WARN_ON_ONCE(!chanctx_conf))
+	/*
+	 * This function can be called from a work, thus it may be possible
+	 * that the chanctx_conf is removed (due to a disconnection, for
+	 * example).
+	 * So nothing should be done in such case.
+	 */
+	if (!chanctx_conf)
 		goto unlock;
 
 	chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf);
@@ -2277,7 +2285,7 @@ u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
 
 u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 			       const struct cfg80211_chan_def *chandef,
-			       u16 prot_mode)
+			       u16 prot_mode, bool rifs_mode)
 {
 	struct ieee80211_ht_operation *ht_oper;
 	/* Build HT Information */
@@ -2305,6 +2313,9 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
 	    chandef->width != NL80211_CHAN_WIDTH_20)
 		ht_oper->ht_param |= IEEE80211_HT_PARAM_CHAN_WIDTH_ANY;
 
+	if (rifs_mode)
+		ht_oper->ht_param |= IEEE80211_HT_PARAM_RIFS_MODE;
+
 	ht_oper->operation_mode = cpu_to_le16(prot_mode);
 	ht_oper->stbc_param = 0x0000;
 
@@ -2958,6 +2969,13 @@ ieee80211_extend_noa_desc(struct ieee80211_noa_data *data, u32 tsf, int i)
 	if (end > 0)
 		return false;
 
+	/* One shot NOA  */
+	if (data->count[i] == 1)
+		return false;
+
+	if (data->desc[i].interval == 0)
+		return false;
+
 	/* End time is in the past, check for repetitions */
 	skip = DIV_ROUND_UP(-end, data->desc[i].interval);
 	if (data->count[i] < 255) {
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d693c9d031fc..c71e274c810a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3432,12 +3432,6 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 					   wdev->iftype))
 		return -EINVAL;
 
-	if (info->attrs[NL80211_ATTR_ACL_POLICY]) {
-		params.acl = parse_acl_data(&rdev->wiphy, info);
-		if (IS_ERR(params.acl))
-			return PTR_ERR(params.acl);
-	}
-
 	if (info->attrs[NL80211_ATTR_SMPS_MODE]) {
 		params.smps_mode =
 			nla_get_u8(info->attrs[NL80211_ATTR_SMPS_MODE]);
@@ -3461,6 +3455,12 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 		params.smps_mode = NL80211_SMPS_OFF;
 	}
 
+	if (info->attrs[NL80211_ATTR_ACL_POLICY]) {
+		params.acl = parse_acl_data(&rdev->wiphy, info);
+		if (IS_ERR(params.acl))
+			return PTR_ERR(params.acl);
+	}
+
 	wdev_lock(wdev);
 	err = rdev_start_ap(rdev, dev, &params);
 	if (!err) {
@@ -3968,10 +3968,13 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
 				  struct station_parameters *params,
 				  enum cfg80211_station_type statype)
 {
-	if (params->listen_interval != -1)
+	if (params->listen_interval != -1 &&
+	    statype != CFG80211_STA_AP_CLIENT_UNASSOC)
 		return -EINVAL;
+
 	if (params->aid &&
-	    !(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)))
+	    !(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) &&
+	    statype != CFG80211_STA_AP_CLIENT_UNASSOC)
 		return -EINVAL;
 
 	/* When you run into this, adjust the code below for the new flag */
@@ -4245,13 +4248,22 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 
 	memset(&params, 0, sizeof(params));
 
-	params.listen_interval = -1;
-
 	if (!rdev->ops->change_station)
 		return -EOPNOTSUPP;
 
-	if (info->attrs[NL80211_ATTR_STA_AID])
-		return -EINVAL;
+	/*
+	 * AID and listen_interval properties can be set only for unassociated
+	 * station. Include these parameters here and will check them in
+	 * cfg80211_check_station_change().
+	 */
+	if (info->attrs[NL80211_ATTR_PEER_AID])
+		params.aid = nla_get_u16(info->attrs[NL80211_ATTR_PEER_AID]);
+
+	if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
+		params.listen_interval =
+		     nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
+	else
+		params.listen_interval = -1;
 
 	if (!info->attrs[NL80211_ATTR_MAC])
 		return -EINVAL;
@@ -4278,9 +4290,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
 			nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]);
 	}
 
-	if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
-		return -EINVAL;
-
 	if (parse_station_flags(info, dev->ieee80211_ptr->iftype, &params))
 		return -EINVAL;