i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
On some Cherry Trail systems the GPU ACPI fwnode has power-resources which point to the PMIC, which is connected over a LPSS I2C controller. The GPU is a PCI device and PCI devices are powered-on at the resume_noirq resume phase. Since the GPU power-resources need the I2C controller, recent acpi_lpss.c changes now also power-up the LPSS I2C controllers on BYT and CHT devices in the resume_noirq resume phase. But during this phase the IRQ of the controller is disabled leading to these errors: i2c_designware 808622C1:06: controller timed out ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.P18W._ON, AE_ERROR video LNXVIDEO:00: Failed to change power state to D0 This commit makes the i2c-designware controller set the IRQF_NO_SUSPEND flag when requesting the interrupt on BYT and CHT devices, so that the IRQ is left enabled during the noirq phase, fixing this. Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Родитель
cc52612ec0
Коммит
b30f2f6556
|
@ -278,6 +278,7 @@ struct dw_i2c_dev {
|
|||
#define ACCESS_SWAP 0x00000001
|
||||
#define ACCESS_16BIT 0x00000002
|
||||
#define ACCESS_INTR_MASK 0x00000004
|
||||
#define ACCESS_NO_IRQ_SUSPEND 0x00000008
|
||||
|
||||
#define MODEL_CHERRYTRAIL 0x00000100
|
||||
#define MODEL_MSCC_OCELOT 0x00000200
|
||||
|
|
|
@ -707,7 +707,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
|
|||
adap->dev.parent = dev->dev;
|
||||
i2c_set_adapdata(adap, dev);
|
||||
|
||||
if (dev->shared_with_punit) {
|
||||
if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
|
||||
irq_flags = IRQF_NO_SUSPEND;
|
||||
} else {
|
||||
irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
|
||||
|
|
|
@ -123,8 +123,8 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
|
|||
{ "INT33C3", 0 },
|
||||
{ "INT3432", 0 },
|
||||
{ "INT3433", 0 },
|
||||
{ "80860F41", 0 },
|
||||
{ "808622C1", MODEL_CHERRYTRAIL },
|
||||
{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
|
||||
{ "808622C1", ACCESS_NO_IRQ_SUSPEND | MODEL_CHERRYTRAIL },
|
||||
{ "AMD0010", ACCESS_INTR_MASK },
|
||||
{ "AMDI0010", ACCESS_INTR_MASK },
|
||||
{ "AMDI0510", 0 },
|
||||
|
|
Загрузка…
Ссылка в новой задаче