mips: drop _PAGE_FILE and pte_file()-related helpers

We've replaced remap_file_pages(2) implementation with emulation.  Nobody
creates non-linear mapping anymore.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Kirill A. Shutemov 2015-02-10 14:10:50 -08:00 коммит произвёл Linus Torvalds
Родитель 937fa39fb2
Коммит b32da82e28
4 изменённых файлов: 0 добавлений и 56 удалений

Просмотреть файл

@ -161,22 +161,6 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
/*
* Encode and decode a nonlinear file mapping entry
*/
#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \
(((_pte).pte >> 2 ) & 0x38) | \
(((_pte).pte >> 10) << 6 ))
#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \
(((off) & 0x38) << 2 ) | \
(((off) >> 6 ) << 10) | \
_PAGE_FILE })
/*
* Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
*/
#define PTE_FILE_MAX_BITS 28
#else
#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
@ -188,13 +172,6 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val })
/*
* Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
*/
#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2)
#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 })
#define PTE_FILE_MAX_BITS 30
#else
/*
* Constraints:
@ -209,19 +186,6 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
/*
* Encode and decode a nonlinear file mapping entry
*/
#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \
(((_pte).pte >> 2) & 0x8) | \
(((_pte).pte >> 8) << 4))
#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \
(((off) & 0x8) << 2) | \
(((off) >> 4) << 8) | \
_PAGE_FILE })
#define PTE_FILE_MAX_BITS 28
#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32) */
#endif /* defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) */

Просмотреть файл

@ -291,13 +291,4 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
/*
* Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to
* make things easier, and only use the upper 56 bits for the page offset...
*/
#define PTE_FILE_MAX_BITS 56
#define pte_to_pgoff(_pte) ((_pte).pte >> 8)
#define pgoff_to_pte(off) ((pte_t) { ((off) << 8) | _PAGE_FILE })
#endif /* _ASM_PGTABLE_64_H */

Просмотреть файл

@ -48,8 +48,6 @@
/*
* The following bits are implemented in software
*
* _PAGE_FILE semantics: set:pagecache unset:swap
*/
#define _PAGE_PRESENT_SHIFT (_CACHE_SHIFT + 3)
#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
@ -64,7 +62,6 @@
#define _PAGE_SILENT_READ _PAGE_VALID
#define _PAGE_SILENT_WRITE _PAGE_DIRTY
#define _PAGE_FILE _PAGE_MODIFIED
#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3)
@ -72,8 +69,6 @@
/*
* The following are implemented by software
*
* _PAGE_FILE semantics: set:pagecache unset:swap
*/
#define _PAGE_PRESENT_SHIFT 0
#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
@ -85,8 +80,6 @@
#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT)
#define _PAGE_MODIFIED_SHIFT 4
#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT)
#define _PAGE_FILE_SHIFT 4
#define _PAGE_FILE (1 << _PAGE_FILE_SHIFT)
/*
* And these are the hardware TLB bits
@ -116,7 +109,6 @@
* The following bits are implemented in software
*
* _PAGE_READ / _PAGE_READ_SHIFT should be unused if cpu_has_rixi.
* _PAGE_FILE semantics: set:pagecache unset:swap
*/
#define _PAGE_PRESENT_SHIFT (0)
#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
@ -128,7 +120,6 @@
#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT)
#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1)
#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT)
#define _PAGE_FILE (_PAGE_MODIFIED)
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
/* huge tlb page */

Просмотреть файл

@ -231,7 +231,6 @@ extern pgd_t swapper_pg_dir[];
static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; }
static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; }
static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; }
static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; }
static inline pte_t pte_wrprotect(pte_t pte)
{
@ -287,7 +286,6 @@ static inline pte_t pte_mkyoung(pte_t pte)
static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; }
static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_MODIFIED; }
static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
static inline pte_t pte_wrprotect(pte_t pte)
{