media: vsp1: Add vsp1_dl_list argument to .configure_stream() operation

The WPF needs access to the current display list to configure writeback.
Add a display list pointer to the VSP1 entity .configure_stream()
operation.

Only display pipelines can make use of the display list there as
mem-to-mem pipelines don't have access to a display list at stream
configuration time. This is not an issue as writeback is only used for
display pipelines.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/platform/vsp1/vsp1_brx.c

@@ -283,6 +283,7 @@ static const struct v4l2_subdev_ops brx_ops = {
 
 static void brx_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_brx *brx = to_brx(&entity->subdev);

drivers/media/platform/vsp1/vsp1_clu.c

@@ -171,6 +171,7 @@ static const struct v4l2_subdev_ops clu_ops = {
 
 static void clu_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_clu *clu = to_clu(&entity->subdev);

drivers/media/platform/vsp1/vsp1_drm.c

@@ -558,7 +558,7 @@ static void vsp1_du_pipeline_configure(struct vsp1_pipeline *pipe)
 		}
 
 		vsp1_entity_route_setup(entity, pipe, dlb);
-		vsp1_entity_configure_stream(entity, pipe, dlb);
+		vsp1_entity_configure_stream(entity, pipe, dl, dlb);
 		vsp1_entity_configure_frame(entity, pipe, dl, dlb);
 		vsp1_entity_configure_partition(entity, pipe, dl, dlb);
 	}

drivers/media/platform/vsp1/vsp1_entity.c

@@ -71,10 +71,11 @@ void vsp1_entity_route_setup(struct vsp1_entity *entity,
 
 void vsp1_entity_configure_stream(struct vsp1_entity *entity,
 				  struct vsp1_pipeline *pipe,
+				  struct vsp1_dl_list *dl,
 				  struct vsp1_dl_body *dlb)
 {
 	if (entity->ops->configure_stream)
-		entity->ops->configure_stream(entity, pipe, dlb);
+		entity->ops->configure_stream(entity, pipe, dl, dlb);
 }
 
 void vsp1_entity_configure_frame(struct vsp1_entity *entity,

drivers/media/platform/vsp1/vsp1_entity.h

@@ -67,7 +67,9 @@ struct vsp1_route {
  * struct vsp1_entity_operations - Entity operations
  * @destroy:	Destroy the entity.
  * @configure_stream:	Setup the hardware parameters for the stream which do
- *			not vary between frames (pipeline, formats).
+ *			not vary between frames (pipeline, formats). Note that
+ *			the vsp1_dl_list argument is only valid for display
+ *			pipeline and will be NULL for mem-to-mem pipelines.
  * @configure_frame:	Configure the runtime parameters for each frame.
  * @configure_partition: Configure partition specific parameters.
  * @max_width:	Return the max supported width of data that the entity can
@@ -78,7 +80,7 @@ struct vsp1_route {
 struct vsp1_entity_operations {
 	void (*destroy)(struct vsp1_entity *);
 	void (*configure_stream)(struct vsp1_entity *, struct vsp1_pipeline *,
-				 struct vsp1_dl_body *);
+				 struct vsp1_dl_list *, struct vsp1_dl_body *);
 	void (*configure_frame)(struct vsp1_entity *, struct vsp1_pipeline *,
 				struct vsp1_dl_list *, struct vsp1_dl_body *);
 	void (*configure_partition)(struct vsp1_entity *,
@@ -155,6 +157,7 @@ void vsp1_entity_route_setup(struct vsp1_entity *entity,
 
 void vsp1_entity_configure_stream(struct vsp1_entity *entity,
 				  struct vsp1_pipeline *pipe,
+				  struct vsp1_dl_list *dl,
 				  struct vsp1_dl_body *dlb);
 
 void vsp1_entity_configure_frame(struct vsp1_entity *entity,

drivers/media/platform/vsp1/vsp1_hgo.c

@@ -131,6 +131,7 @@ static const struct v4l2_ctrl_config hgo_num_bins_control = {
 
 static void hgo_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_hgo *hgo = to_hgo(&entity->subdev);

drivers/media/platform/vsp1/vsp1_hgt.c

@@ -127,6 +127,7 @@ static const struct v4l2_ctrl_config hgt_hue_areas = {
 
 static void hgt_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_hgt *hgt = to_hgt(&entity->subdev);

drivers/media/platform/vsp1/vsp1_hsit.c

@@ -129,6 +129,7 @@ static const struct v4l2_subdev_ops hsit_ops = {
 
 static void hsit_configure_stream(struct vsp1_entity *entity,
 				  struct vsp1_pipeline *pipe,
+				  struct vsp1_dl_list *dl,
 				  struct vsp1_dl_body *dlb)
 {
 	struct vsp1_hsit *hsit = to_hsit(&entity->subdev);

drivers/media/platform/vsp1/vsp1_lif.c

@@ -84,6 +84,7 @@ static const struct v4l2_subdev_ops lif_ops = {
 
 static void lif_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	const struct v4l2_mbus_framefmt *format;

drivers/media/platform/vsp1/vsp1_lut.c

@@ -147,6 +147,7 @@ static const struct v4l2_subdev_ops lut_ops = {
 
 static void lut_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_lut *lut = to_lut(&entity->subdev);

drivers/media/platform/vsp1/vsp1_rpf.c

@@ -57,6 +57,7 @@ static const struct v4l2_subdev_ops rpf_ops = {
 
 static void rpf_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);

drivers/media/platform/vsp1/vsp1_sru.c

@@ -269,6 +269,7 @@ static const struct v4l2_subdev_ops sru_ops = {
 
 static void sru_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	const struct vsp1_sru_param *param;

drivers/media/platform/vsp1/vsp1_uds.c

@@ -257,6 +257,7 @@ static const struct v4l2_subdev_ops uds_ops = {
 
 static void uds_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_uds *uds = to_uds(&entity->subdev);

drivers/media/platform/vsp1/vsp1_uif.c

@@ -192,6 +192,7 @@ static const struct v4l2_subdev_ops uif_ops = {
 
 static void uif_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_uif *uif = to_uif(&entity->subdev);

drivers/media/platform/vsp1/vsp1_video.c

@@ -825,7 +825,8 @@ static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe)
 
 	list_for_each_entry(entity, &pipe->entities, list_pipe) {
 		vsp1_entity_route_setup(entity, pipe, pipe->stream_config);
-		vsp1_entity_configure_stream(entity, pipe, pipe->stream_config);
+		vsp1_entity_configure_stream(entity, pipe, NULL,
+					     pipe->stream_config);
 	}
 
 	return 0;

drivers/media/platform/vsp1/vsp1_wpf.c

@@ -234,6 +234,7 @@ static void vsp1_wpf_destroy(struct vsp1_entity *entity)
 
 static void wpf_configure_stream(struct vsp1_entity *entity,
 				 struct vsp1_pipeline *pipe,
+				 struct vsp1_dl_list *dl,
 				 struct vsp1_dl_body *dlb)
 {
 	struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);