ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity

On some devices (with a buggy _BIX implementation) full_charge_capacity
always reports as 0. This means that our energy_full sysfs attribute will
also always be 0, which is not useful to export.

Worse we calculate our reported capacity on full_charge_capacity and if it
is 0 we always report 0. This causes userspace to immediately shutdown or
hibernate the laptop since it assumes that the battery is critically low.

This commit makes us not report energy_full[_design] or capacity on such
broken devices, avoiding the immediate shutdown / hibernate from userspace.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=83941
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit is contained in:
Hans de Goede 2018-08-07 09:36:30 +02:00 коммит произвёл Rafael J. Wysocki
Родитель 2754435d4c
Коммит b41901a2cf
1 изменённых файлов: 19 добавлений и 0 удалений

Просмотреть файл

@ -364,6 +364,20 @@ static enum power_supply_property energy_battery_props[] = {
POWER_SUPPLY_PROP_SERIAL_NUMBER,
};
static enum power_supply_property energy_battery_full_cap_broken_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_CYCLE_COUNT,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_POWER_NOW,
POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_SERIAL_NUMBER,
};
/* --------------------------------------------------------------------------
Battery Management
-------------------------------------------------------------------------- */
@ -798,6 +812,11 @@ static int sysfs_add_battery(struct acpi_battery *battery)
battery->bat_desc.properties = charge_battery_props;
battery->bat_desc.num_properties =
ARRAY_SIZE(charge_battery_props);
} else if (battery->full_charge_capacity == 0) {
battery->bat_desc.properties =
energy_battery_full_cap_broken_props;
battery->bat_desc.num_properties =
ARRAY_SIZE(energy_battery_full_cap_broken_props);
} else {
battery->bat_desc.properties = energy_battery_props;
battery->bat_desc.num_properties =