arm64: dts: apq8016-sbc: Limit MPP4 high state to 1.8V

96Boards specs require all GPIO signals to be at 1.8V.
Limit MPP4, which is PIN28 on J8, to 1.8V(L5).

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This commit is contained in:
Ivan T. Ivanov 2017-01-04 13:35:00 +00:00 коммит произвёл Andy Gross
Родитель f953d999d2
Коммит b4dba94765
1 изменённых файлов: 13 добавлений и 0 удалений

Просмотреть файл

@ -1,4 +1,5 @@
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
&pm8916_gpios {
@ -30,6 +31,18 @@
&pm8916_mpps {
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f>;
ls_exp_gpio_f: pm8916_mpp4 {
pinconf {
pins = "mpp4";
function = "digital";
output-low;
power-source = <PM8916_MPP_L5>; // 1.8V
};
};
pm8916_mpps_leds: pm8916_mpps_leds {
pinconf {
pins = "mpp2", "mpp3";