From b519c9c7e68d5e2e9d5aaff3843fda09342c79d7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 18 Aug 2022 17:18:12 +0200 Subject: [PATCH] ARM: footbridge: remove addin mode This does not appear to have been used in many years, we can kill off some of the uglier code. Among other things, it avoids a randconfig issue when both modes are disabled: arch/arm/mach-footbridge/common.c:149:24: error: 'ebsa285_host_io_desc' defined but not used [-Werror=unused-variable] 149 | static struct map_desc ebsa285_host_io_desc[] __initdata = { | ^~~~~~~~~~~~~~~~~~~~ arch/arm/mach-footbridge/common.c:136:24: error: 'fb_common_io_desc' defined but not used [-Werror=unused-variable] 136 | static struct map_desc fb_common_io_desc[] __initdata = { | ^~~~~~~~~~~~~~~~~ The recently added phys_to_dma() functions are now trivial and could probably be removed again as a follow-up, if anyone knows how. Cc: Christoph Hellwig Tested-by: Marc Zyngier Signed-off-by: Arnd Bergmann --- arch/arm/include/asm/hardware/dec21285.h | 13 ---- arch/arm/mach-footbridge/Kconfig | 28 +------ arch/arm/mach-footbridge/Makefile | 2 +- arch/arm/mach-footbridge/common.c | 73 ++----------------- arch/arm/mach-footbridge/dc21285.c | 59 +++++---------- arch/arm/mach-footbridge/dma.c | 3 +- .../arm/mach-footbridge/include/mach/memory.h | 22 ------ arch/arm/mach-footbridge/isa.c | 3 - 8 files changed, 29 insertions(+), 174 deletions(-) diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h index 3f18a56a025d..eee390e8d4dc 100644 --- a/arch/arm/include/asm/hardware/dec21285.h +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -81,19 +81,6 @@ #define SA110_CNTL_XCSDIR(x) ((x)<<28) #define SA110_CNTL_PCICFN (1 << 31) -/* - * footbridge_cfn_mode() is used when we want - * to check whether we are the central function - */ -#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN) -#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN) -#define footbridge_cfn_mode() __footbridge_cfn_mode() -#elif defined(CONFIG_FOOTBRIDGE_HOST) -#define footbridge_cfn_mode() (1) -#else -#define footbridge_cfn_mode() (0) -#endif - #define CSR_PCIADDR_EXTN DC21285_IO(0x0140) #define CSR_PREFETCHMEMRANGE DC21285_IO(0x0144) #define CSR_XBUS_CYCLE DC21285_IO(0x0148) diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index acc10b1caa69..3497ea8e91e3 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -8,31 +8,17 @@ config ARCH_CATS depends on UNUSED_BOARD_FILES select CLKEVT_I8253 select CLKSRC_I8253 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select FORCE_PCI help Say Y here if you intend to run this kernel on the CATS. Saying N will reduce the size of the Footbridge kernel. -config ARCH_EBSA285_ADDIN - bool "EBSA285 (addin mode)" - select ARCH_EBSA285 - select FOOTBRIDGE_ADDIN - help - Say Y here if you intend to run this kernel on the EBSA285 card - in addin mode. - - Saying N will reduce the size of the Footbridge kernel. - config ARCH_EBSA285_HOST bool "EBSA285 (host mode)" select ARCH_EBSA285 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select ARCH_MAY_HAVE_PC_FDC select FORCE_PCI help @@ -45,9 +31,7 @@ config ARCH_NETWINDER bool "NetWinder" select CLKEVT_I8253 select CLKSRC_I8253 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select FORCE_PCI help Say Y here if you intend to run this kernel on the Rebel.COM @@ -61,19 +45,11 @@ endmenu # Footbridge support config FOOTBRIDGE + def_bool y select ARCH_HAS_PHYS_TO_DMA - bool - -# Footbridge in host mode -config FOOTBRIDGE_HOST - bool select ARCH_MIGHT_HAVE_PC_SERIO + select ISA_DMA -# Footbridge in addin mode -config FOOTBRIDGE_ADDIN - bool - -# EBSA285 board in either host or addin mode config ARCH_EBSA285 bool diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 6262993c0555..30bae6684dce 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -9,7 +9,7 @@ obj-y := common.o dma.o isa-irq.o pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o -pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o +pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 5020eb96b025..9483eccea5ae 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -198,9 +198,6 @@ void __init footbridge_init_irq(void) __fb_init_irq(); - if (!footbridge_cfn_mode()) - return; - if (machine_is_ebsa285()) /* The following is dependent on which slot * you plug the Southbridge card into. We @@ -221,21 +218,13 @@ void __init footbridge_init_irq(void) * commented out since there is a "No Fix" problem with it. Not mapping * it means that we have extra bullet protection on our feet. */ -static struct map_desc fb_common_io_desc[] __initdata = { +static struct map_desc ebsa285_host_io_desc[] __initdata = { { .virtual = ARMCSR_BASE, .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE), .length = ARMCSR_SIZE, .type = MT_DEVICE, - } -}; - -/* - * The mapping when the footbridge is in host mode. We don't map any of - * this when we are in add-in mode. - */ -static struct map_desc ebsa285_host_io_desc[] __initdata = { -#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST) + }, { .virtual = PCIMEM_BASE, .pfn = __phys_to_pfn(DC21285_PCI_MEM), @@ -257,26 +246,12 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .length = PCIIACK_SIZE, .type = MT_DEVICE, }, -#endif }; void __init footbridge_map_io(void) { - /* - * Set up the common mapping first; we need this to - * determine whether we're in host mode or not. - */ - iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc)); - - /* - * Now, work out what we've got to map in addition on this - * platform. - */ - if (footbridge_cfn_mode()) { - iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); - pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); - } - + iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); + pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); vga_base = PCIMEM_BASE; } @@ -307,48 +282,12 @@ void footbridge_restart(enum reboot_mode mode, const char *cmd) } } -#ifdef CONFIG_FOOTBRIDGE_ADDIN - -static inline unsigned long fb_bus_sdram_offset(void) -{ - return *CSR_PCISDRAMBASE & 0xfffffff0; -} - -/* - * These two functions convert virtual addresses to PCI addresses and PCI - * addresses to virtual addresses. Note that it is only legal to use these - * on memory obtained via get_zeroed_page or kmalloc. - */ -unsigned long __virt_to_bus(unsigned long res) -{ - WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); - - return res + (fb_bus_sdram_offset() - PAGE_OFFSET); -} -EXPORT_SYMBOL(__virt_to_bus); - -unsigned long __bus_to_virt(unsigned long res) -{ - res = res - (fb_bus_sdram_offset() - PAGE_OFFSET); - - WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); - - return res; -} -EXPORT_SYMBOL(__bus_to_virt); -#else -static inline unsigned long fb_bus_sdram_offset(void) -{ - return BUS_OFFSET; -} -#endif /* CONFIG_FOOTBRIDGE_ADDIN */ - dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) { - return paddr + (fb_bus_sdram_offset() - PHYS_OFFSET); + return paddr + (BUS_OFFSET - PHYS_OFFSET); } phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr) { - return dev_addr - (fb_bus_sdram_offset() - PHYS_OFFSET); + return dev_addr - (BUS_OFFSET - PHYS_OFFSET); } diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index f9713dc561cf..372600bc15c8 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -245,9 +245,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) { struct resource *res; - if (nr || !footbridge_cfn_mode()) - return 0; - res = kcalloc(2, sizeof(struct resource), GFP_KERNEL); if (!res) { printk("out of memory for root bus resources"); @@ -278,7 +275,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) void __init dc21285_preinit(void) { unsigned int mem_size, mem_mask; - int cfn_mode; pcibios_min_mem = 0x81000000; @@ -298,21 +294,15 @@ void __init dc21285_preinit(void) *CSR_CSRBASEOFFSET = 0; *CSR_PCIADDR_EXTN = 0; - cfn_mode = __footbridge_cfn_mode(); - printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in " - "%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ? - "central function" : "addin"); + "central function mode\n", *CSR_CLASSREV & 0xff); - if (footbridge_cfn_mode()) { - /* - * Clear any existing errors - we aren't - * interested in historical data... - */ - *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) | - SA110_CNTL_RXSERR; - *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS; - } + /* + * Clear any existing errors - we aren't + * interested in historical data... + */ + *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) | SA110_CNTL_RXSERR; + *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS; timer_setup(&serr_timer, dc21285_enable_error, 0); timer_setup(&perr_timer, dc21285_enable_error, 0); @@ -331,29 +321,18 @@ void __init dc21285_preinit(void) dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0, "PCI data parity", NULL); - if (cfn_mode) { - /* - * Map our SDRAM at a known address in PCI space, just in case - * the firmware had other ideas. Using a nonzero base is - * necessary, since some VGA cards forcefully use PCI addresses - * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). - */ - *CSR_PCICSRBASE = 0xf4000000; - *CSR_PCICSRIOBASE = 0; - *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); - *CSR_PCIROMBASE = 0; - *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS; - } else if (footbridge_cfn_mode() != 0) { - /* - * If we are not compiled to accept "add-in" mode, then - * we are using a constant virt_to_bus translation which - * can not hope to cater for the way the host BIOS has - * set up the machine. - */ - panic("PCI: this kernel is compiled for central " - "function mode only"); - } + /* + * Map our SDRAM at a known address in PCI space, just in case + * the firmware had other ideas. Using a nonzero base is + * necessary, since some VGA cards forcefully use PCI addresses + * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). + */ + *CSR_PCICSRBASE = 0xf4000000; + *CSR_PCICSRIOBASE = 0; + *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); + *CSR_PCIROMBASE = 0; + *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS; } void __init dc21285_postinit(void) diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c index 86618074a7a5..228757c8e06f 100644 --- a/arch/arm/mach-footbridge/dma.c +++ b/arch/arm/mach-footbridge/dma.c @@ -50,8 +50,7 @@ static int __init fb_dma_init(void) dma[_DC21285_DMA(1)].d_ops = &fb_dma_ops; #endif #ifdef CONFIG_ISA_DMA - if (footbridge_cfn_mode()) - isa_init_dma(); + isa_init_dma(); #endif return 0; } diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index 3a5d2638c18f..8f0ca8e8b37e 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -16,22 +16,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H - -#if defined(CONFIG_FOOTBRIDGE_ADDIN) -/* - * If we may be using add-in footbridge mode, then we must - * use the out-of-line translation that makes use of the - * PCI BAR - */ -#ifndef __ASSEMBLY__ -extern unsigned long __virt_to_bus(unsigned long); -extern unsigned long __bus_to_virt(unsigned long); -#endif -#define __virt_to_bus __virt_to_bus -#define __bus_to_virt __bus_to_virt - -#elif defined(CONFIG_FOOTBRIDGE_HOST) - /* * The footbridge is programmed to expose the system RAM at 0xe0000000. * The requirement is that the RAM isn't placed at bus address 0, which @@ -41,12 +25,6 @@ extern unsigned long __bus_to_virt(unsigned long); #define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) #define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) -#else - -#error "Undefined footbridge mode" - -#endif - /* * Cache flushing area. */ diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c index ec5af521cf95..3375ac23c046 100644 --- a/arch/arm/mach-footbridge/isa.c +++ b/arch/arm/mach-footbridge/isa.c @@ -79,9 +79,6 @@ static int __init footbridge_isa_init(void) { int err = 0; - if (!footbridge_cfn_mode()) - return 0; - /* Personal server doesn't have RTC */ if (!machine_is_personal_server()) { isa_rtc_init();