usb: phy: samsung: Add PHY support for USB 3.0 controller
Adding PHY driver support for USB 3.0 controller for Samsung's SoCs. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Vivek Gautam
Felipe Balbi
Родитель
dc2377d0b0
Коммит
b527675817
|
|
@ -61,3 +61,57 @@ Example:
|
|||
reg = <0x10020704 0x8>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
** Samsung's usb 3.0 phy transceiver
|
||||
|
||||
Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver
|
||||
which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0
|
||||
controllers across Samsung SOCs.
|
||||
|
||||
Required properties:
|
||||
|
||||
Exynos5250:
|
||||
- compatible : should be "samsung,exynos5250-usb3phy"
|
||||
- reg : base physical address of the phy registers and length of memory mapped
|
||||
region.
|
||||
- clocks: Clock IDs array as required by the controller.
|
||||
- clock-names: names of clocks correseponding to IDs in the clock property
|
||||
as requested by the controller driver.
|
||||
|
||||
Optional properties:
|
||||
- #address-cells: should be '1' when usbphy node has a child node with 'reg'
|
||||
property.
|
||||
- #size-cells: should be '1' when usbphy node has a child node with 'reg'
|
||||
property.
|
||||
- ranges: allows valid translation between child's address space and parent's
|
||||
address space.
|
||||
|
||||
- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller
|
||||
interface for usb-phy. It should provide the following information required by
|
||||
usb-phy controller to control phy.
|
||||
- reg : base physical address of PHY_CONTROL registers.
|
||||
The size of this register is the total sum of size of all PHY_CONTROL
|
||||
registers that the SoC has. For example, the size will be
|
||||
'0x4' in case we have only one PHY_CONTROL register (e.g.
|
||||
OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210)
|
||||
and, '0x8' in case we have two PHY_CONTROL registers (e.g.
|
||||
USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x).
|
||||
and so on.
|
||||
|
||||
Example:
|
||||
usbphy@12100000 {
|
||||
compatible = "samsung,exynos5250-usb3phy";
|
||||
reg = <0x12100000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
clocks = <&clock 1>, <&clock 286>;
|
||||
clock-names = "ext_xtal", "usbdrd30";
|
||||
|
||||
usbphy-sys {
|
||||
/* USB device and host PHY_CONTROL registers */
|
||||
reg = <0x10040704 0x8>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -99,6 +99,13 @@ config SAMSUNG_USB2PHY
|
|||
Enable this to support Samsung USB 2.0 (High Speed) PHY controller
|
||||
driver for Samsung SoCs.
|
||||
|
||||
config SAMSUNG_USB3PHY
|
||||
tristate "Samsung USB 3.0 PHY controller Driver"
|
||||
select SAMSUNG_USBPHY
|
||||
help
|
||||
Enable this to support Samsung USB 3.0 (Super Speed) phy controller
|
||||
for samsung SoCs.
|
||||
|
||||
config TWL4030_USB
|
||||
tristate "TWL4030 USB Transceiver Driver"
|
||||
depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
|
|||
obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
|
||||
obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
|
||||
obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o
|
||||
obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o
|
||||
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
|
||||
obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o
|
||||
obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o
|
||||
|
|
|
|||
|
|
@ -145,6 +145,86 @@
|
|||
|
||||
#define EXYNOS5_PHY_OTG_TUNE (0x40)
|
||||
|
||||
/* EXYNOS5: USB 3.0 DRD */
|
||||
#define EXYNOS5_DRD_LINKSYSTEM (0x04)
|
||||
|
||||
#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
|
||||
#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
|
||||
#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27)
|
||||
|
||||
#define EXYNOS5_DRD_PHYUTMI (0x08)
|
||||
|
||||
#define PHYUTMI_OTGDISABLE (0x1 << 6)
|
||||
#define PHYUTMI_FORCESUSPEND (0x1 << 1)
|
||||
#define PHYUTMI_FORCESLEEP (0x1 << 0)
|
||||
|
||||
#define EXYNOS5_DRD_PHYPIPE (0x0c)
|
||||
|
||||
#define EXYNOS5_DRD_PHYCLKRST (0x10)
|
||||
|
||||
#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
|
||||
#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
|
||||
|
||||
#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
|
||||
#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
|
||||
|
||||
#define PHYCLKRST_SSC_EN (0x1 << 20)
|
||||
#define PHYCLKRST_REF_SSP_EN (0x1 << 19)
|
||||
#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18)
|
||||
|
||||
#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
|
||||
#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
|
||||
#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11)
|
||||
#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
|
||||
#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
|
||||
#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
|
||||
|
||||
#define PHYCLKRST_FSEL_MASK (0x3f << 5)
|
||||
#define PHYCLKRST_FSEL(_x) ((_x) << 5)
|
||||
#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
|
||||
#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
|
||||
#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
|
||||
#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
|
||||
|
||||
#define PHYCLKRST_RETENABLEN (0x1 << 4)
|
||||
|
||||
#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
|
||||
#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
|
||||
#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
|
||||
|
||||
#define PHYCLKRST_PORTRESET (0x1 << 1)
|
||||
#define PHYCLKRST_COMMONONN (0x1 << 0)
|
||||
|
||||
#define EXYNOS5_DRD_PHYREG0 (0x14)
|
||||
#define EXYNOS5_DRD_PHYREG1 (0x18)
|
||||
|
||||
#define EXYNOS5_DRD_PHYPARAM0 (0x1c)
|
||||
|
||||
#define PHYPARAM0_REF_USE_PAD (0x1 << 31)
|
||||
#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
|
||||
#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
|
||||
|
||||
#define EXYNOS5_DRD_PHYPARAM1 (0x20)
|
||||
|
||||
#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
|
||||
#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
|
||||
|
||||
#define EXYNOS5_DRD_PHYTERM (0x24)
|
||||
|
||||
#define EXYNOS5_DRD_PHYTEST (0x28)
|
||||
|
||||
#define PHYTEST_POWERDOWN_SSP (0x1 << 3)
|
||||
#define PHYTEST_POWERDOWN_HSP (0x1 << 2)
|
||||
|
||||
#define EXYNOS5_DRD_PHYADP (0x2c)
|
||||
|
||||
#define EXYNOS5_DRD_PHYBATCHG (0x30)
|
||||
|
||||
#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2)
|
||||
|
||||
#define EXYNOS5_DRD_PHYRESUME (0x34)
|
||||
#define EXYNOS5_DRD_LINKPORT (0x44)
|
||||
|
||||
#ifndef MHZ
|
||||
#define MHZ (1000*1000)
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,349 @@
|
|||
/* linux/drivers/usb/phy/phy-samsung-usb3.c
|
||||
*
|
||||
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* Author: Vivek Gautam <gautam.vivek@samsung.com>
|
||||
*
|
||||
* Samsung USB 3.0 PHY transceiver; talks to DWC3 controller.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/usb/samsung_usb_phy.h>
|
||||
#include <linux/platform_data/samsung-usbphy.h>
|
||||
|
||||
#include "phy-samsung-usb.h"
|
||||
|
||||
/*
|
||||
* Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core.
|
||||
*/
|
||||
static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy)
|
||||
{
|
||||
u32 reg;
|
||||
u32 refclk;
|
||||
|
||||
refclk = sphy->ref_clk_freq;
|
||||
|
||||
reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
|
||||
PHYCLKRST_FSEL(refclk);
|
||||
|
||||
switch (refclk) {
|
||||
case FSEL_CLKSEL_50M:
|
||||
reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
|
||||
PHYCLKRST_SSC_REFCLKSEL(0x00));
|
||||
break;
|
||||
case FSEL_CLKSEL_20M:
|
||||
reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
|
||||
PHYCLKRST_SSC_REFCLKSEL(0x00));
|
||||
break;
|
||||
case FSEL_CLKSEL_19200K:
|
||||
reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
|
||||
PHYCLKRST_SSC_REFCLKSEL(0x88));
|
||||
break;
|
||||
case FSEL_CLKSEL_24M:
|
||||
default:
|
||||
reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
|
||||
PHYCLKRST_SSC_REFCLKSEL(0x88));
|
||||
break;
|
||||
}
|
||||
|
||||
return reg;
|
||||
}
|
||||
|
||||
static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
|
||||
{
|
||||
void __iomem *regs = sphy->regs;
|
||||
u32 phyparam0;
|
||||
u32 phyparam1;
|
||||
u32 linksystem;
|
||||
u32 phybatchg;
|
||||
u32 phytest;
|
||||
u32 phyclkrst;
|
||||
|
||||
/* Reset USB 3.0 PHY */
|
||||
writel(0x0, regs + EXYNOS5_DRD_PHYREG0);
|
||||
|
||||
phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0);
|
||||
/* Select PHY CLK source */
|
||||
phyparam0 &= ~PHYPARAM0_REF_USE_PAD;
|
||||
/* Set Loss-of-Signal Detector sensitivity */
|
||||
phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
|
||||
phyparam0 |= PHYPARAM0_REF_LOSLEVEL;
|
||||
writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0);
|
||||
|
||||
writel(0x0, regs + EXYNOS5_DRD_PHYRESUME);
|
||||
|
||||
/*
|
||||
* Setting the Frame length Adj value[6:1] to default 0x20
|
||||
* See xHCI 1.0 spec, 5.2.4
|
||||
*/
|
||||
linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL |
|
||||
LINKSYSTEM_FLADJ(0x20);
|
||||
writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM);
|
||||
|
||||
phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1);
|
||||
/* Set Tx De-Emphasis level */
|
||||
phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
|
||||
phyparam1 |= PHYPARAM1_PCS_TXDEEMPH;
|
||||
writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1);
|
||||
|
||||
phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG);
|
||||
phybatchg |= PHYBATCHG_UTMI_CLKSEL;
|
||||
writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG);
|
||||
|
||||
/* PHYTEST POWERDOWN Control */
|
||||
phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
|
||||
phytest &= ~(PHYTEST_POWERDOWN_SSP |
|
||||
PHYTEST_POWERDOWN_HSP);
|
||||
writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
|
||||
|
||||
/* UTMI Power Control */
|
||||
writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI);
|
||||
|
||||
phyclkrst = samsung_usb3phy_set_refclk(sphy);
|
||||
|
||||
phyclkrst |= PHYCLKRST_PORTRESET |
|
||||
/* Digital power supply in normal operating mode */
|
||||
PHYCLKRST_RETENABLEN |
|
||||
/* Enable ref clock for SS function */
|
||||
PHYCLKRST_REF_SSP_EN |
|
||||
/* Enable spread spectrum */
|
||||
PHYCLKRST_SSC_EN |
|
||||
/* Power down HS Bias and PLL blocks in suspend mode */
|
||||
PHYCLKRST_COMMONONN;
|
||||
|
||||
writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
|
||||
|
||||
udelay(10);
|
||||
|
||||
phyclkrst &= ~(PHYCLKRST_PORTRESET);
|
||||
writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy)
|
||||
{
|
||||
u32 phyutmi;
|
||||
u32 phyclkrst;
|
||||
u32 phytest;
|
||||
void __iomem *regs = sphy->regs;
|
||||
|
||||
phyutmi = PHYUTMI_OTGDISABLE |
|
||||
PHYUTMI_FORCESUSPEND |
|
||||
PHYUTMI_FORCESLEEP;
|
||||
writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI);
|
||||
|
||||
/* Resetting the PHYCLKRST enable bits to reduce leakage current */
|
||||
phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST);
|
||||
phyclkrst &= ~(PHYCLKRST_REF_SSP_EN |
|
||||
PHYCLKRST_SSC_EN |
|
||||
PHYCLKRST_COMMONONN);
|
||||
writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
|
||||
|
||||
/* Control PHYTEST to remove leakage current */
|
||||
phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
|
||||
phytest |= (PHYTEST_POWERDOWN_SSP |
|
||||
PHYTEST_POWERDOWN_HSP);
|
||||
writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
|
||||
}
|
||||
|
||||
static int samsung_usb3phy_init(struct usb_phy *phy)
|
||||
{
|
||||
struct samsung_usbphy *sphy;
|
||||
unsigned long flags;
|
||||
int ret = 0;
|
||||
|
||||
sphy = phy_to_sphy(phy);
|
||||
|
||||
/* Enable the phy clock */
|
||||
ret = clk_prepare_enable(sphy->clk);
|
||||
if (ret) {
|
||||
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
|
||||
return ret;
|
||||
}
|
||||
|
||||
spin_lock_irqsave(&sphy->lock, flags);
|
||||
|
||||
/* setting default phy-type for USB 3.0 */
|
||||
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
|
||||
|
||||
/* Disable phy isolation */
|
||||
samsung_usbphy_set_isolation(sphy, false);
|
||||
|
||||
/* Initialize usb phy registers */
|
||||
samsung_exynos5_usb3phy_enable(sphy);
|
||||
|
||||
spin_unlock_irqrestore(&sphy->lock, flags);
|
||||
|
||||
/* Disable the phy clock */
|
||||
clk_disable_unprepare(sphy->clk);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* The function passed to the usb driver for phy shutdown
|
||||
*/
|
||||
static void samsung_usb3phy_shutdown(struct usb_phy *phy)
|
||||
{
|
||||
struct samsung_usbphy *sphy;
|
||||
unsigned long flags;
|
||||
|
||||
sphy = phy_to_sphy(phy);
|
||||
|
||||
if (clk_prepare_enable(sphy->clk)) {
|
||||
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
spin_lock_irqsave(&sphy->lock, flags);
|
||||
|
||||
/* setting default phy-type for USB 3.0 */
|
||||
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
|
||||
|
||||
/* De-initialize usb phy registers */
|
||||
samsung_exynos5_usb3phy_disable(sphy);
|
||||
|
||||
/* Enable phy isolation */
|
||||
samsung_usbphy_set_isolation(sphy, true);
|
||||
|
||||
spin_unlock_irqrestore(&sphy->lock, flags);
|
||||
|
||||
clk_disable_unprepare(sphy->clk);
|
||||
}
|
||||
|
||||
static int samsung_usb3phy_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct samsung_usbphy *sphy;
|
||||
struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct resource *phy_mem;
|
||||
void __iomem *phy_base;
|
||||
struct clk *clk;
|
||||
int ret;
|
||||
|
||||
phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!phy_mem) {
|
||||
dev_err(dev, "%s: missing mem resource\n", __func__);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
phy_base = devm_request_and_ioremap(dev, phy_mem);
|
||||
if (!phy_base) {
|
||||
dev_err(dev, "%s: register mapping failed\n", __func__);
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
|
||||
if (!sphy)
|
||||
return -ENOMEM;
|
||||
|
||||
clk = devm_clk_get(dev, "usbdrd30");
|
||||
if (IS_ERR(clk)) {
|
||||
dev_err(dev, "Failed to get device clock\n");
|
||||
return PTR_ERR(clk);
|
||||
}
|
||||
|
||||
sphy->dev = dev;
|
||||
|
||||
if (dev->of_node) {
|
||||
ret = samsung_usbphy_parse_dt(sphy);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
} else {
|
||||
if (!pdata) {
|
||||
dev_err(dev, "no platform data specified\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
sphy->plat = pdata;
|
||||
sphy->regs = phy_base;
|
||||
sphy->clk = clk;
|
||||
sphy->phy.dev = sphy->dev;
|
||||
sphy->phy.label = "samsung-usb3phy";
|
||||
sphy->phy.init = samsung_usb3phy_init;
|
||||
sphy->phy.shutdown = samsung_usb3phy_shutdown;
|
||||
sphy->drv_data = samsung_usbphy_get_driver_data(pdev);
|
||||
sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
|
||||
|
||||
spin_lock_init(&sphy->lock);
|
||||
|
||||
platform_set_drvdata(pdev, sphy);
|
||||
|
||||
return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB3);
|
||||
}
|
||||
|
||||
static int samsung_usb3phy_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
|
||||
|
||||
usb_remove_phy(&sphy->phy);
|
||||
|
||||
if (sphy->pmuregs)
|
||||
iounmap(sphy->pmuregs);
|
||||
if (sphy->sysreg)
|
||||
iounmap(sphy->sysreg);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
|
||||
.cpu_type = TYPE_EXYNOS5250,
|
||||
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id samsung_usbphy_dt_match[] = {
|
||||
{
|
||||
.compatible = "samsung,exynos5250-usb3phy",
|
||||
.data = &usb3phy_exynos5
|
||||
},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
|
||||
#endif
|
||||
|
||||
static struct platform_device_id samsung_usbphy_driver_ids[] = {
|
||||
{
|
||||
.name = "exynos5250-usb3phy",
|
||||
.driver_data = (unsigned long)&usb3phy_exynos5,
|
||||
},
|
||||
{},
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
|
||||
|
||||
static struct platform_driver samsung_usb3phy_driver = {
|
||||
.probe = samsung_usb3phy_probe,
|
||||
.remove = samsung_usb3phy_remove,
|
||||
.id_table = samsung_usbphy_driver_ids,
|
||||
.driver = {
|
||||
.name = "samsung-usb3phy",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(samsung_usb3phy_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Samsung USB 3.0 phy controller");
|
||||
MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:samsung-usb3phy");
|
||||
Загрузка…
Ссылка в новой задаче