agp/intel: Use pci_bus_address() to get GTTADR bus address

Per the Intel 915G/915GV/... Chipset spec (document number 301467-005),
GTTADR is a standard PCI BAR.

The PCI core reads GTTADR at enumeration-time.  Use pci_bus_address()
instead of reading it again in the driver.  This works correctly for both
32-bit and 64-bit BARs.  The spec above only mentions 32-bit GTTADR, but we
should still use the standard interface.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Bjorn Helgaas 2014-01-03 18:29:00 -07:00
Родитель 5ef6d8f495
Коммит b5e350f919
2 изменённых файлов: 4 добавлений и 5 удалений

Просмотреть файл

@ -115,7 +115,7 @@
/* intel 915G registers */
#define I915_GMADR_BAR 2
#define I915_MMADR_BAR 0
#define I915_PTEADDR 0x1C
#define I915_PTE_BAR 3
#define I915_GMCH_GMS_STOLEN_48M (0x6 << 4)
#define I915_GMCH_GMS_STOLEN_64M (0x7 << 4)
#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4)

Просмотреть файл

@ -1102,7 +1102,7 @@ static void i965_write_entry(dma_addr_t addr,
static int i9xx_setup(void)
{
u32 reg_addr, gtt_addr;
u32 reg_addr;
int size = KB(512);
reg_addr = pci_bus_address(intel_private.pcidev, I915_MMADR_BAR);
@ -1113,9 +1113,8 @@ static int i9xx_setup(void)
switch (INTEL_GTT_GEN) {
case 3:
pci_read_config_dword(intel_private.pcidev,
I915_PTEADDR, &gtt_addr);
intel_private.gtt_phys_addr = gtt_addr;
intel_private.gtt_phys_addr =
pci_bus_address(intel_private.pcidev, I915_PTE_BAR);
break;
case 5:
intel_private.gtt_phys_addr = reg_addr + MB(2);