From b67328e1cf9735d2491ef9402fb7439db1d6e2ae Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Thu, 7 Feb 2019 09:24:46 +0000 Subject: [PATCH] pinctrl: at91: add option to use drive strength bits SAM9X60 uses high and low drive strengths. To implement this, in at91_pinctrl_mux_ops::set_drivestrength and at91_pinctrl_mux_ops::get_drivestrength we need bit numbers of drive strengths (1 for low, 2 for high), thus change the code to allow the usage of drive strength bit numbers. Signed-off-by: Claudiu Beznea Acked-by: Ludovic Desroches Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-at91.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 3d49bbbcdbc7..e907093b5b13 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -72,10 +72,15 @@ static int gpio_banks; * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive * strength when there is no dt config for it. */ -#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT) +enum drive_strength_bit { + DRIVE_STRENGTH_BIT_DEF, + DRIVE_STRENGTH_BIT_LOW, + DRIVE_STRENGTH_BIT_MED, + DRIVE_STRENGTH_BIT_HI, +}; + +#define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \ + DRIVE_STRENGTH_SHIFT) /** * struct at91_pmx_func - describes AT91 pinmux functions @@ -551,7 +556,7 @@ static unsigned at91_mux_sama5d3_get_drivestrength(void __iomem *pio, /* SAMA5 strength is 1:1 with our defines, * except 0 is equivalent to low per datasheet */ if (!tmp) - tmp = DRIVE_STRENGTH_LOW; + tmp = DRIVE_STRENGTH_BIT_MSK(LOW); return tmp; } @@ -564,7 +569,7 @@ static unsigned at91_mux_sam9x5_get_drivestrength(void __iomem *pio, /* strength is inverse in SAM9x5s hardware with the pinctrl defines * hardware: 0 = hi, 1 = med, 2 = low, 3 = rsvd */ - tmp = DRIVE_STRENGTH_HI - tmp; + tmp = DRIVE_STRENGTH_BIT_MSK(HI) - tmp; return tmp; } @@ -600,7 +605,7 @@ static void at91_mux_sam9x5_set_drivestrength(void __iomem *pio, unsigned pin, /* strength is inverse on SAM9x5s with our defines * 0 = hi, 1 = med, 2 = low, 3 = rsvd */ - setting = DRIVE_STRENGTH_HI - setting; + setting = DRIVE_STRENGTH_BIT_MSK(HI) - setting; set_drive_strength(pio + at91sam9x5_get_drive_register(pin), pin, setting); @@ -959,11 +964,11 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev, } \ } while (0) -#define DBG_SHOW_FLAG_MASKED(mask,flag) do { \ +#define DBG_SHOW_FLAG_MASKED(mask, flag, name) do { \ if ((config & mask) == flag) { \ if (num_conf) \ seq_puts(s, "|"); \ - seq_puts(s, #flag); \ + seq_puts(s, #name); \ num_conf++; \ } \ } while (0) @@ -981,9 +986,12 @@ static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev, DBG_SHOW_FLAG(PULL_DOWN); DBG_SHOW_FLAG(DIS_SCHMIT); DBG_SHOW_FLAG(DEGLITCH); - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_LOW); - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_MED); - DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_HI); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(LOW), + DRIVE_STRENGTH_LOW); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(MED), + DRIVE_STRENGTH_MED); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(HI), + DRIVE_STRENGTH_HI); DBG_SHOW_FLAG(DEBOUNCE); if (config & DEBOUNCE) { val = config >> DEBOUNCE_VAL_SHIFT;