From b7b7da2abe1fe02e989577293b9ece0fa15ccc31 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Mon, 5 Jun 2017 16:40:57 +0800 Subject: [PATCH] ACPICA: Split resource descriptor decode strings to a new file ACPICA commit 00906ae0aff4c6b76abc232ef99700e7d7c0e325 There are enough of these strings to justify a separate file. Also, these strings are only used for the disassembler and the debugger. Thus, this change improves ACPICA modularity. Link: https://github.com/acpica/acpica/commit/00906ae0 Signed-off-by: Bob Moore Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/Makefile | 1 + drivers/acpi/acpica/utresdecode.c | 315 ++++++++++++++++++++++++++++++ drivers/acpi/acpica/utresrc.c | 264 ------------------------- 3 files changed, 316 insertions(+), 264 deletions(-) create mode 100644 drivers/acpi/acpica/utresdecode.c diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index dea65306b687..b125bdd3d58b 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -172,6 +172,7 @@ acpi-y += \ utosi.o \ utownerid.o \ utpredef.o \ + utresdecode.o \ utresrc.o \ utstate.o \ utstring.o \ diff --git a/drivers/acpi/acpica/utresdecode.c b/drivers/acpi/acpica/utresdecode.c new file mode 100644 index 000000000000..e15a2538558b --- /dev/null +++ b/drivers/acpi/acpica/utresdecode.c @@ -0,0 +1,315 @@ +/******************************************************************************* + * + * Module Name: utresdecode - Resource descriptor keyword strings + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2017, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acresrc.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utresdecode") + +#if defined (ACPI_DEBUG_OUTPUT) || \ + defined (ACPI_DISASSEMBLER) || \ + defined (ACPI_DEBUGGER) +/* + * Strings used to decode resource descriptors. + * Used by both the disassembler and the debugger resource dump routines + */ +const char *acpi_gbl_bm_decode[] = { + "NotBusMaster", + "BusMaster" +}; + +const char *acpi_gbl_config_decode[] = { + "0 - Good Configuration", + "1 - Acceptable Configuration", + "2 - Suboptimal Configuration", + "3 - ***Invalid Configuration***", +}; + +const char *acpi_gbl_consume_decode[] = { + "ResourceProducer", + "ResourceConsumer" +}; + +const char *acpi_gbl_dec_decode[] = { + "PosDecode", + "SubDecode" +}; + +const char *acpi_gbl_he_decode[] = { + "Level", + "Edge" +}; + +const char *acpi_gbl_io_decode[] = { + "Decode10", + "Decode16" +}; + +const char *acpi_gbl_ll_decode[] = { + "ActiveHigh", + "ActiveLow", + "ActiveBoth", + "Reserved" +}; + +const char *acpi_gbl_max_decode[] = { + "MaxNotFixed", + "MaxFixed" +}; + +const char *acpi_gbl_mem_decode[] = { + "NonCacheable", + "Cacheable", + "WriteCombining", + "Prefetchable" +}; + +const char *acpi_gbl_min_decode[] = { + "MinNotFixed", + "MinFixed" +}; + +const char *acpi_gbl_mtp_decode[] = { + "AddressRangeMemory", + "AddressRangeReserved", + "AddressRangeACPI", + "AddressRangeNVS" +}; + +const char *acpi_gbl_rng_decode[] = { + "InvalidRanges", + "NonISAOnlyRanges", + "ISAOnlyRanges", + "EntireRange" +}; + +const char *acpi_gbl_rw_decode[] = { + "ReadOnly", + "ReadWrite" +}; + +const char *acpi_gbl_shr_decode[] = { + "Exclusive", + "Shared", + "ExclusiveAndWake", /* ACPI 5.0 */ + "SharedAndWake" /* ACPI 5.0 */ +}; + +const char *acpi_gbl_siz_decode[] = { + "Transfer8", + "Transfer8_16", + "Transfer16", + "InvalidSize" +}; + +const char *acpi_gbl_trs_decode[] = { + "DenseTranslation", + "SparseTranslation" +}; + +const char *acpi_gbl_ttp_decode[] = { + "TypeStatic", + "TypeTranslation" +}; + +const char *acpi_gbl_typ_decode[] = { + "Compatibility", + "TypeA", + "TypeB", + "TypeF" +}; + +const char *acpi_gbl_ppc_decode[] = { + "PullDefault", + "PullUp", + "PullDown", + "PullNone" +}; + +const char *acpi_gbl_ior_decode[] = { + "IoRestrictionNone", + "IoRestrictionInputOnly", + "IoRestrictionOutputOnly", + "IoRestrictionNoneAndPreserve" +}; + +const char *acpi_gbl_dts_decode[] = { + "Width8bit", + "Width16bit", + "Width32bit", + "Width64bit", + "Width128bit", + "Width256bit", +}; + +/* GPIO connection type */ + +const char *acpi_gbl_ct_decode[] = { + "Interrupt", + "I/O" +}; + +/* Serial bus type */ + +const char *acpi_gbl_sbt_decode[] = { + "/* UNKNOWN serial bus type */", + "I2C", + "SPI", + "UART" +}; + +/* I2C serial bus access mode */ + +const char *acpi_gbl_am_decode[] = { + "AddressingMode7Bit", + "AddressingMode10Bit" +}; + +/* I2C serial bus slave mode */ + +const char *acpi_gbl_sm_decode[] = { + "ControllerInitiated", + "DeviceInitiated" +}; + +/* SPI serial bus wire mode */ + +const char *acpi_gbl_wm_decode[] = { + "FourWireMode", + "ThreeWireMode" +}; + +/* SPI serial clock phase */ + +const char *acpi_gbl_cph_decode[] = { + "ClockPhaseFirst", + "ClockPhaseSecond" +}; + +/* SPI serial bus clock polarity */ + +const char *acpi_gbl_cpo_decode[] = { + "ClockPolarityLow", + "ClockPolarityHigh" +}; + +/* SPI serial bus device polarity */ + +const char *acpi_gbl_dp_decode[] = { + "PolarityLow", + "PolarityHigh" +}; + +/* UART serial bus endian */ + +const char *acpi_gbl_ed_decode[] = { + "LittleEndian", + "BigEndian" +}; + +/* UART serial bus bits per byte */ + +const char *acpi_gbl_bpb_decode[] = { + "DataBitsFive", + "DataBitsSix", + "DataBitsSeven", + "DataBitsEight", + "DataBitsNine", + "/* UNKNOWN Bits per byte */", + "/* UNKNOWN Bits per byte */", + "/* UNKNOWN Bits per byte */" +}; + +/* UART serial bus stop bits */ + +const char *acpi_gbl_sb_decode[] = { + "StopBitsZero", + "StopBitsOne", + "StopBitsOnePlusHalf", + "StopBitsTwo" +}; + +/* UART serial bus flow control */ + +const char *acpi_gbl_fc_decode[] = { + "FlowControlNone", + "FlowControlHardware", + "FlowControlXON", + "/* UNKNOWN flow control keyword */" +}; + +/* UART serial bus parity type */ + +const char *acpi_gbl_pt_decode[] = { + "ParityTypeNone", + "ParityTypeEven", + "ParityTypeOdd", + "ParityTypeMark", + "ParityTypeSpace", + "/* UNKNOWN parity keyword */", + "/* UNKNOWN parity keyword */", + "/* UNKNOWN parity keyword */" +}; + +/* pin_config type */ + +const char *acpi_gbl_ptyp_decode[] = { + "Default", + "Bias Pull-up", + "Bias Pull-down", + "Bias Default", + "Bias Disable", + "Bias High Impedance", + "Bias Bus Hold", + "Drive Open Drain", + "Drive Open Source", + "Drive Push Pull", + "Drive Strength", + "Slew Rate", + "Input Debounce", + "Input Schmitt Trigger", +}; + +#endif diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index b4282ea32262..5fa992027b74 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -48,270 +48,6 @@ #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utresrc") -#if defined(ACPI_DEBUG_OUTPUT) || defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER) -/* - * Strings used to decode resource descriptors. - * Used by both the disassembler and the debugger resource dump routines - */ -const char *acpi_gbl_bm_decode[] = { - "NotBusMaster", - "BusMaster" -}; - -const char *acpi_gbl_config_decode[] = { - "0 - Good Configuration", - "1 - Acceptable Configuration", - "2 - Suboptimal Configuration", - "3 - ***Invalid Configuration***", -}; - -const char *acpi_gbl_consume_decode[] = { - "ResourceProducer", - "ResourceConsumer" -}; - -const char *acpi_gbl_dec_decode[] = { - "PosDecode", - "SubDecode" -}; - -const char *acpi_gbl_he_decode[] = { - "Level", - "Edge" -}; - -const char *acpi_gbl_io_decode[] = { - "Decode10", - "Decode16" -}; - -const char *acpi_gbl_ll_decode[] = { - "ActiveHigh", - "ActiveLow", - "ActiveBoth", - "Reserved" -}; - -const char *acpi_gbl_max_decode[] = { - "MaxNotFixed", - "MaxFixed" -}; - -const char *acpi_gbl_mem_decode[] = { - "NonCacheable", - "Cacheable", - "WriteCombining", - "Prefetchable" -}; - -const char *acpi_gbl_min_decode[] = { - "MinNotFixed", - "MinFixed" -}; - -const char *acpi_gbl_mtp_decode[] = { - "AddressRangeMemory", - "AddressRangeReserved", - "AddressRangeACPI", - "AddressRangeNVS" -}; - -const char *acpi_gbl_rng_decode[] = { - "InvalidRanges", - "NonISAOnlyRanges", - "ISAOnlyRanges", - "EntireRange" -}; - -const char *acpi_gbl_rw_decode[] = { - "ReadOnly", - "ReadWrite" -}; - -const char *acpi_gbl_shr_decode[] = { - "Exclusive", - "Shared", - "ExclusiveAndWake", /* ACPI 5.0 */ - "SharedAndWake" /* ACPI 5.0 */ -}; - -const char *acpi_gbl_siz_decode[] = { - "Transfer8", - "Transfer8_16", - "Transfer16", - "InvalidSize" -}; - -const char *acpi_gbl_trs_decode[] = { - "DenseTranslation", - "SparseTranslation" -}; - -const char *acpi_gbl_ttp_decode[] = { - "TypeStatic", - "TypeTranslation" -}; - -const char *acpi_gbl_typ_decode[] = { - "Compatibility", - "TypeA", - "TypeB", - "TypeF" -}; - -const char *acpi_gbl_ppc_decode[] = { - "PullDefault", - "PullUp", - "PullDown", - "PullNone" -}; - -const char *acpi_gbl_ior_decode[] = { - "IoRestrictionNone", - "IoRestrictionInputOnly", - "IoRestrictionOutputOnly", - "IoRestrictionNoneAndPreserve" -}; - -const char *acpi_gbl_dts_decode[] = { - "Width8bit", - "Width16bit", - "Width32bit", - "Width64bit", - "Width128bit", - "Width256bit", -}; - -/* GPIO connection type */ - -const char *acpi_gbl_ct_decode[] = { - "Interrupt", - "I/O" -}; - -/* Serial bus type */ - -const char *acpi_gbl_sbt_decode[] = { - "/* UNKNOWN serial bus type */", - "I2C", - "SPI", - "UART" -}; - -/* I2C serial bus access mode */ - -const char *acpi_gbl_am_decode[] = { - "AddressingMode7Bit", - "AddressingMode10Bit" -}; - -/* I2C serial bus slave mode */ - -const char *acpi_gbl_sm_decode[] = { - "ControllerInitiated", - "DeviceInitiated" -}; - -/* SPI serial bus wire mode */ - -const char *acpi_gbl_wm_decode[] = { - "FourWireMode", - "ThreeWireMode" -}; - -/* SPI serial clock phase */ - -const char *acpi_gbl_cph_decode[] = { - "ClockPhaseFirst", - "ClockPhaseSecond" -}; - -/* SPI serial bus clock polarity */ - -const char *acpi_gbl_cpo_decode[] = { - "ClockPolarityLow", - "ClockPolarityHigh" -}; - -/* SPI serial bus device polarity */ - -const char *acpi_gbl_dp_decode[] = { - "PolarityLow", - "PolarityHigh" -}; - -/* UART serial bus endian */ - -const char *acpi_gbl_ed_decode[] = { - "LittleEndian", - "BigEndian" -}; - -/* UART serial bus bits per byte */ - -const char *acpi_gbl_bpb_decode[] = { - "DataBitsFive", - "DataBitsSix", - "DataBitsSeven", - "DataBitsEight", - "DataBitsNine", - "/* UNKNOWN Bits per byte */", - "/* UNKNOWN Bits per byte */", - "/* UNKNOWN Bits per byte */" -}; - -/* UART serial bus stop bits */ - -const char *acpi_gbl_sb_decode[] = { - "StopBitsZero", - "StopBitsOne", - "StopBitsOnePlusHalf", - "StopBitsTwo" -}; - -/* UART serial bus flow control */ - -const char *acpi_gbl_fc_decode[] = { - "FlowControlNone", - "FlowControlHardware", - "FlowControlXON", - "/* UNKNOWN flow control keyword */" -}; - -/* UART serial bus parity type */ - -const char *acpi_gbl_pt_decode[] = { - "ParityTypeNone", - "ParityTypeEven", - "ParityTypeOdd", - "ParityTypeMark", - "ParityTypeSpace", - "/* UNKNOWN parity keyword */", - "/* UNKNOWN parity keyword */", - "/* UNKNOWN parity keyword */" -}; - -/* pin_config type */ - -const char *acpi_gbl_ptyp_decode[] = { - "Default", - "Bias Pull-up", - "Bias Pull-down", - "Bias Default", - "Bias Disable", - "Bias High Impedance", - "Bias Bus Hold", - "Drive Open Drain", - "Drive Open Source", - "Drive Push Pull", - "Drive Strength", - "Slew Rate", - "Input Debounce", - "Input Schmitt Trigger", -}; - -#endif - /* * Base sizes of the raw AML resource descriptors, indexed by resource type. * Zero indicates a reserved (and therefore invalid) resource type.