From b7c4114b07bbacfe0aee1d04ad1ade9e42309620 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 10 Jun 2013 23:12:57 -0300 Subject: [PATCH] can: flexcan: Use a regulator to control the CAN transceiver Instead of using a GPIO to turn on/off the CAN transceiver, it is better to use a regulator as some systems may use a PMIC to power the CAN transceiver. Acked-by: Shawn Guo Signed-off-by: Fabio Estevam Signed-off-by: Marc Kleine-Budde --- .../bindings/net/can/fsl-flexcan.txt | 2 + arch/arm/boot/dts/imx28-evk.dts | 12 +++++ arch/arm/mach-mxs/mach-mxs.c | 50 +------------------ drivers/net/can/flexcan.c | 25 +++++----- 4 files changed, 28 insertions(+), 61 deletions(-) diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 8ff324eaa889..56d6cc336e1c 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -16,6 +16,8 @@ Optional properties: - clock-frequency : The oscillator frequency driving the flexcan device +- xceiver-supply: Regulator that powers the CAN transceiver + Example: can@1c000 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 3637bf3b1d59..1f0d38d7b16f 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -155,12 +155,14 @@ can0: can@80032000 { pinctrl-names = "default"; pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can_3v3>; status = "okay"; }; can1: can@80034000 { pinctrl-names = "default"; pinctrl-0 = <&can1_pins_a>; + xceiver-supply = <®_can_3v3>; status = "okay"; }; }; @@ -319,6 +321,16 @@ gpio = <&gpio3 30 0>; enable-active-high; }; + + reg_can_3v3: can-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 13 0>; + enable-active-high; + }; + }; sound { diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 5b62b6489d4b..97b8a44101cd 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -60,41 +59,6 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg) __raw_writel(mask, reg + MXS_TOG_ADDR); } -/* - * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers - */ -#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) - -static int flexcan0_en, flexcan1_en; - -static void mx28evk_flexcan_switch(void) -{ - if (flexcan0_en || flexcan1_en) - gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1); - else - gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0); -} - -static void mx28evk_flexcan0_switch(int enable) -{ - flexcan0_en = enable; - mx28evk_flexcan_switch(); -} - -static void mx28evk_flexcan1_switch(int enable) -{ - flexcan1_en = enable; - mx28evk_flexcan_switch(); -} - -static struct flexcan_platform_data flexcan_pdata[2]; - -static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]), - OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]), - { /* sentinel */ } -}; - #define OCOTP_WORD_OFFSET 0x20 #define OCOTP_WORD_COUNT 0x20 @@ -254,15 +218,6 @@ static void __init imx28_evk_init(void) mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } -static void __init imx28_evk_post_init(void) -{ - if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, - "flexcan-switch")) { - flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch; - flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch; - } -} - static int apx4devkit_phy_fixup(struct phy_device *phy) { phy->dev_flags |= MICREL_PHY_50MHZ_CLK; @@ -374,13 +329,10 @@ static void __init mxs_machine_init(void) cfa10049_init(); of_platform_populate(NULL, of_default_bus_match_table, - mxs_auxdata_lookup, NULL); + NULL, NULL); if (of_machine_is_compatible("karo,tx28")) tx28_post_init(); - - if (of_machine_is_compatible("fsl,imx28-evk")) - imx28_evk_post_init(); } #define MX23_CLKCTRL_RESET_OFFSET 0x120 diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index f873b9f8d4d4..7b0be0910f4b 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -37,6 +36,7 @@ #include #include #include +#include #define DRV_NAME "flexcan" @@ -211,6 +211,7 @@ struct flexcan_priv { struct clk *clk_per; struct flexcan_platform_data *pdata; const struct flexcan_devtype_data *devtype_data; + struct regulator *reg_xceiver; }; static struct flexcan_devtype_data fsl_p1010_devtype_data = { @@ -258,15 +259,6 @@ static inline void flexcan_write(u32 val, void __iomem *addr) } #endif -/* - * Swtich transceiver on or off - */ -static void flexcan_transceiver_switch(const struct flexcan_priv *priv, int on) -{ - if (priv->pdata && priv->pdata->transceiver_switch) - priv->pdata->transceiver_switch(on); -} - static inline int flexcan_has_and_handle_berr(const struct flexcan_priv *priv, u32 reg_esr) { @@ -799,7 +791,11 @@ static int flexcan_chip_start(struct net_device *dev) if (priv->devtype_data->features & FLEXCAN_HAS_V10_FEATURES) flexcan_write(0x0, ®s->rxfgmask); - flexcan_transceiver_switch(priv, 1); + if (priv->reg_xceiver) { + err = regulator_enable(priv->reg_xceiver); + if (err) + goto out; + } /* synchronize with the can bus */ reg_mcr = flexcan_read(®s->mcr); @@ -842,7 +838,8 @@ static void flexcan_chip_stop(struct net_device *dev) reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT; flexcan_write(reg, ®s->mcr); - flexcan_transceiver_switch(priv, 0); + if (priv->reg_xceiver) + regulator_disable(priv->reg_xceiver); priv->can.state = CAN_STATE_STOPPED; return; @@ -1084,6 +1081,10 @@ static int flexcan_probe(struct platform_device *pdev) priv->pdata = pdev->dev.platform_data; priv->devtype_data = devtype_data; + priv->reg_xceiver = devm_regulator_get(&pdev->dev, "xceiver"); + if (IS_ERR(priv->reg_xceiver)) + priv->reg_xceiver = NULL; + netif_napi_add(dev, &priv->napi, flexcan_poll, FLEXCAN_NAPI_WEIGHT); dev_set_drvdata(&pdev->dev, dev);