ARM: dts: dra7: Move cpus node to parent dts for dra74x and dra72x

Nearly all of the information in the cpus node, especially for cpu0, is
the same between dra74x and dra72x so move the common information to
the parent dra7.dtsi to avoid duplication of data.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/dra7.dtsi

@@ -73,6 +73,33 @@
 		interrupt-parent = <&gic>;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
 	/*
 	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.

arch/arm/boot/dts/dra72x.dtsi

@@ -12,22 +12,6 @@
 / {
 	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
 		interrupt-parent = <&wakeupgen>;

arch/arm/boot/dts/dra74x.dtsi

@@ -13,30 +13,6 @@
 	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000	1060000
-				1176000	1160000
-				>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";