iio: Added Capella cm3232 ambient light sensor driver.
CM3232 is an advanced ambient light sensor with I2C protocol interface. The I2C slave address is internally hardwired as 0x10 (7-bit). Writing to configure register is byte mode, but reading ALS register requests to use word mode for 16-bit resolution. Signed-off-by: Kevin Tsai <ktsai@capellamicro.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Родитель
a77945fd4f
Коммит
b84894c7f0
|
@ -34,6 +34,7 @@ atmel,24c512 i2c serial eeprom (24cxx)
|
|||
atmel,24c1024 i2c serial eeprom (24cxx)
|
||||
atmel,at97sc3204t i2c trusted platform module (TPM)
|
||||
capella,cm32181 CM32181: Ambient Light Sensor
|
||||
capella,cm3232 CM3232: Ambient Light Sensor
|
||||
catalyst,24c32 i2c serial eeprom
|
||||
cirrus,cs42l51 Cirrus Logic CS42L51 audio codec
|
||||
dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock
|
||||
|
|
|
@ -2379,6 +2379,12 @@ F: security/capability.c
|
|||
F: security/commoncap.c
|
||||
F: kernel/capability.c
|
||||
|
||||
CAPELLA MICROSYSTEMS LIGHT SENSOR DRIVER
|
||||
M: Kevin Tsai <ktsai@capellamicro.com>
|
||||
S: Maintained
|
||||
F: drivers/iio/light/cm*
|
||||
F: Documentation/devicetree/bindings/i2c/trivial-devices.txt
|
||||
|
||||
CC2520 IEEE-802.15.4 RADIO DRIVER
|
||||
M: Varka Bhadram <varkabhadram@gmail.com>
|
||||
L: linux-wpan@vger.kernel.org
|
||||
|
|
|
@ -48,6 +48,17 @@ config CM32181
|
|||
To compile this driver as a module, choose M here:
|
||||
the module will be called cm32181.
|
||||
|
||||
config CM3232
|
||||
depends on I2C
|
||||
tristate "CM3232 ambient light sensor"
|
||||
help
|
||||
Say Y here if you use cm3232.
|
||||
This option enables ambient light sensor using
|
||||
Capella Microsystems cm3232 device driver.
|
||||
|
||||
To compile this driver as a module, choose M here:
|
||||
the module will be called cm3232.
|
||||
|
||||
config CM36651
|
||||
depends on I2C
|
||||
tristate "CM36651 driver"
|
||||
|
|
|
@ -7,6 +7,7 @@ obj-$(CONFIG_ADJD_S311) += adjd_s311.o
|
|||
obj-$(CONFIG_AL3320A) += al3320a.o
|
||||
obj-$(CONFIG_APDS9300) += apds9300.o
|
||||
obj-$(CONFIG_CM32181) += cm32181.o
|
||||
obj-$(CONFIG_CM3232) += cm3232.o
|
||||
obj-$(CONFIG_CM36651) += cm36651.o
|
||||
obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
|
||||
obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
|
||||
|
|
|
@ -0,0 +1,403 @@
|
|||
/*
|
||||
* CM3232 Ambient Light Sensor
|
||||
*
|
||||
* Copyright (C) 2014-2015 Capella Microsystems Inc.
|
||||
* Author: Kevin Tsai <ktsai@capellamicro.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2, as published
|
||||
* by the Free Software Foundation.
|
||||
*
|
||||
* IIO driver for CM3232 (7-bit I2C slave address 0x10).
|
||||
*/
|
||||
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
/* Registers Address */
|
||||
#define CM3232_REG_ADDR_CMD 0x00
|
||||
#define CM3232_REG_ADDR_ALS 0x50
|
||||
#define CM3232_REG_ADDR_ID 0x53
|
||||
|
||||
#define CM3232_CMD_ALS_DISABLE BIT(0)
|
||||
|
||||
#define CM3232_CMD_ALS_IT_SHIFT 2
|
||||
#define CM3232_CMD_ALS_IT_MASK (BIT(2) | BIT(3) | BIT(4))
|
||||
#define CM3232_CMD_ALS_IT_DEFAULT (0x01 << CM3232_CMD_ALS_IT_SHIFT)
|
||||
|
||||
#define CM3232_CMD_ALS_RESET BIT(6)
|
||||
|
||||
#define CM3232_CMD_DEFAULT CM3232_CMD_ALS_IT_DEFAULT
|
||||
|
||||
#define CM3232_HW_ID 0x32
|
||||
#define CM3232_CALIBSCALE_DEFAULT 100000
|
||||
#define CM3232_CALIBSCALE_RESOLUTION 100000
|
||||
#define CM3232_MLUX_PER_LUX 1000
|
||||
|
||||
#define CM3232_MLUX_PER_BIT_DEFAULT 64
|
||||
#define CM3232_MLUX_PER_BIT_BASE_IT 100000
|
||||
|
||||
static const struct {
|
||||
int val;
|
||||
int val2;
|
||||
u8 it;
|
||||
} cm3232_als_it_scales[] = {
|
||||
{0, 100000, 0}, /* 0.100000 */
|
||||
{0, 200000, 1}, /* 0.200000 */
|
||||
{0, 400000, 2}, /* 0.400000 */
|
||||
{0, 800000, 3}, /* 0.800000 */
|
||||
{1, 600000, 4}, /* 1.600000 */
|
||||
{3, 200000, 5}, /* 3.200000 */
|
||||
};
|
||||
|
||||
struct cm3232_als_info {
|
||||
u8 regs_cmd_default;
|
||||
u8 hw_id;
|
||||
int calibscale;
|
||||
int mlux_per_bit;
|
||||
int mlux_per_bit_base_it;
|
||||
};
|
||||
|
||||
static struct cm3232_als_info cm3232_als_info_default = {
|
||||
.regs_cmd_default = CM3232_CMD_DEFAULT,
|
||||
.hw_id = CM3232_HW_ID,
|
||||
.calibscale = CM3232_CALIBSCALE_DEFAULT,
|
||||
.mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT,
|
||||
.mlux_per_bit_base_it = CM3232_MLUX_PER_BIT_BASE_IT,
|
||||
};
|
||||
|
||||
struct cm3232_chip {
|
||||
struct i2c_client *client;
|
||||
struct cm3232_als_info *als_info;
|
||||
u8 regs_cmd;
|
||||
u16 regs_als;
|
||||
};
|
||||
|
||||
/**
|
||||
* cm3232_reg_init() - Initialize CM3232
|
||||
* @chip: pointer of struct cm3232_chip.
|
||||
*
|
||||
* Check and initialize CM3232 ambient light sensor.
|
||||
*
|
||||
* Return: 0 for success; otherwise for error code.
|
||||
*/
|
||||
static int cm3232_reg_init(struct cm3232_chip *chip)
|
||||
{
|
||||
struct i2c_client *client = chip->client;
|
||||
s32 ret;
|
||||
|
||||
chip->als_info = &cm3232_als_info_default;
|
||||
|
||||
/* Identify device */
|
||||
ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID);
|
||||
if (ret < 0) {
|
||||
dev_err(&chip->client->dev, "Error reading addr_id\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if ((ret & 0xFF) != chip->als_info->hw_id)
|
||||
return -ENODEV;
|
||||
|
||||
/* Disable and reset device */
|
||||
chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET;
|
||||
ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
|
||||
chip->regs_cmd);
|
||||
if (ret < 0) {
|
||||
dev_err(&chip->client->dev, "Error writing reg_cmd\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Register default value */
|
||||
chip->regs_cmd = chip->als_info->regs_cmd_default;
|
||||
|
||||
/* Configure register */
|
||||
ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
|
||||
chip->regs_cmd);
|
||||
if (ret < 0)
|
||||
dev_err(&chip->client->dev, "Error writing reg_cmd\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* cm3232_read_als_it() - Get sensor integration time
|
||||
* @chip: pointer of struct cm3232_chip
|
||||
* @val: pointer of int to load the integration (sec).
|
||||
* @val2: pointer of int to load the integration time (microsecond).
|
||||
*
|
||||
* Report the current integration time.
|
||||
*
|
||||
* Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
|
||||
*/
|
||||
static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2)
|
||||
{
|
||||
u16 als_it;
|
||||
int i;
|
||||
|
||||
als_it = chip->regs_cmd;
|
||||
als_it &= CM3232_CMD_ALS_IT_MASK;
|
||||
als_it >>= CM3232_CMD_ALS_IT_SHIFT;
|
||||
for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
|
||||
if (als_it == cm3232_als_it_scales[i].it) {
|
||||
*val = cm3232_als_it_scales[i].val;
|
||||
*val2 = cm3232_als_it_scales[i].val2;
|
||||
return IIO_VAL_INT_PLUS_MICRO;
|
||||
}
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/**
|
||||
* cm3232_write_als_it() - Write sensor integration time
|
||||
* @chip: pointer of struct cm3232_chip.
|
||||
* @val: integration time in second.
|
||||
* @val2: integration time in microsecond.
|
||||
*
|
||||
* Convert integration time to sensor value.
|
||||
*
|
||||
* Return: i2c_smbus_write_byte_data command return value.
|
||||
*/
|
||||
static int cm3232_write_als_it(struct cm3232_chip *chip, int val, int val2)
|
||||
{
|
||||
struct i2c_client *client = chip->client;
|
||||
u16 als_it, cmd;
|
||||
int i;
|
||||
s32 ret;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
|
||||
if (val == cm3232_als_it_scales[i].val &&
|
||||
val2 == cm3232_als_it_scales[i].val2) {
|
||||
|
||||
als_it = cm3232_als_it_scales[i].it;
|
||||
als_it <<= CM3232_CMD_ALS_IT_SHIFT;
|
||||
|
||||
cmd = chip->regs_cmd & ~CM3232_CMD_ALS_IT_MASK;
|
||||
cmd |= als_it;
|
||||
ret = i2c_smbus_write_byte_data(client,
|
||||
CM3232_REG_ADDR_CMD,
|
||||
cmd);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
chip->regs_cmd = cmd;
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/**
|
||||
* cm3232_get_lux() - report current lux value
|
||||
* @chip: pointer of struct cm3232_chip.
|
||||
*
|
||||
* Convert sensor data to lux. It depends on integration
|
||||
* time and calibscale variable.
|
||||
*
|
||||
* Return: Zero or positive value is lux, otherwise error code.
|
||||
*/
|
||||
static int cm3232_get_lux(struct cm3232_chip *chip)
|
||||
{
|
||||
struct i2c_client *client = chip->client;
|
||||
struct cm3232_als_info *als_info = chip->als_info;
|
||||
int ret;
|
||||
int val, val2;
|
||||
int als_it;
|
||||
u64 lux;
|
||||
|
||||
/* Calculate mlux per bit based on als_it */
|
||||
ret = cm3232_read_als_it(chip, &val, &val2);
|
||||
if (ret < 0)
|
||||
return -EINVAL;
|
||||
als_it = val * 1000000 + val2;
|
||||
lux = (__force u64)als_info->mlux_per_bit;
|
||||
lux *= als_info->mlux_per_bit_base_it;
|
||||
lux = div_u64(lux, als_it);
|
||||
|
||||
ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ALS);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Error reading reg_addr_als\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
chip->regs_als = (u16)ret;
|
||||
lux *= chip->regs_als;
|
||||
lux *= als_info->calibscale;
|
||||
lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION);
|
||||
lux = div_u64(lux, CM3232_MLUX_PER_LUX);
|
||||
|
||||
if (lux > 0xFFFF)
|
||||
lux = 0xFFFF;
|
||||
|
||||
return (int)lux;
|
||||
}
|
||||
|
||||
static int cm3232_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
struct cm3232_chip *chip = iio_priv(indio_dev);
|
||||
struct cm3232_als_info *als_info = chip->als_info;
|
||||
int ret;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_PROCESSED:
|
||||
ret = cm3232_get_lux(chip);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = ret;
|
||||
return IIO_VAL_INT;
|
||||
case IIO_CHAN_INFO_CALIBSCALE:
|
||||
*val = als_info->calibscale;
|
||||
return IIO_VAL_INT;
|
||||
case IIO_CHAN_INFO_INT_TIME:
|
||||
return cm3232_read_als_it(chip, val, val2);
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int cm3232_write_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int val, int val2, long mask)
|
||||
{
|
||||
struct cm3232_chip *chip = iio_priv(indio_dev);
|
||||
struct cm3232_als_info *als_info = chip->als_info;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_CALIBSCALE:
|
||||
als_info->calibscale = val;
|
||||
return 0;
|
||||
case IIO_CHAN_INFO_INT_TIME:
|
||||
return cm3232_write_als_it(chip, val, val2);
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/**
|
||||
* cm3232_get_it_available() - Get available ALS IT value
|
||||
* @dev: pointer of struct device.
|
||||
* @attr: pointer of struct device_attribute.
|
||||
* @buf: pointer of return string buffer.
|
||||
*
|
||||
* Display the available integration time in second.
|
||||
*
|
||||
* Return: string length.
|
||||
*/
|
||||
static ssize_t cm3232_get_it_available(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
int i, len;
|
||||
|
||||
for (i = 0, len = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++)
|
||||
len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
|
||||
cm3232_als_it_scales[i].val,
|
||||
cm3232_als_it_scales[i].val2);
|
||||
return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec cm3232_channels[] = {
|
||||
{
|
||||
.type = IIO_LIGHT,
|
||||
.info_mask_separate =
|
||||
BIT(IIO_CHAN_INFO_PROCESSED) |
|
||||
BIT(IIO_CHAN_INFO_CALIBSCALE) |
|
||||
BIT(IIO_CHAN_INFO_INT_TIME),
|
||||
}
|
||||
};
|
||||
|
||||
static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
|
||||
S_IRUGO, cm3232_get_it_available, NULL, 0);
|
||||
|
||||
static struct attribute *cm3232_attributes[] = {
|
||||
&iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group cm3232_attribute_group = {
|
||||
.attrs = cm3232_attributes
|
||||
};
|
||||
|
||||
static const struct iio_info cm3232_info = {
|
||||
.driver_module = THIS_MODULE,
|
||||
.read_raw = &cm3232_read_raw,
|
||||
.write_raw = &cm3232_write_raw,
|
||||
.attrs = &cm3232_attribute_group,
|
||||
};
|
||||
|
||||
static int cm3232_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct cm3232_chip *chip;
|
||||
struct iio_dev *indio_dev;
|
||||
int ret;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
chip = iio_priv(indio_dev);
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
chip->client = client;
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->channels = cm3232_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(cm3232_channels);
|
||||
indio_dev->info = &cm3232_info;
|
||||
indio_dev->name = id->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
||||
ret = cm3232_reg_init(chip);
|
||||
if (ret) {
|
||||
dev_err(&client->dev,
|
||||
"%s: register init failed\n",
|
||||
__func__);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return iio_device_register(indio_dev);
|
||||
}
|
||||
|
||||
static int cm3232_remove(struct i2c_client *client)
|
||||
{
|
||||
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
||||
|
||||
i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
|
||||
CM3232_CMD_ALS_DISABLE);
|
||||
|
||||
iio_device_unregister(indio_dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id cm3232_id[] = {
|
||||
{"cm3232", 0},
|
||||
{}
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, cm3232_id);
|
||||
|
||||
static const struct of_device_id cm3232_of_match[] = {
|
||||
{.compatible = "capella,cm3232"},
|
||||
{}
|
||||
};
|
||||
|
||||
static struct i2c_driver cm3232_driver = {
|
||||
.driver = {
|
||||
.name = "cm3232",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(cm3232_of_match),
|
||||
},
|
||||
.id_table = cm3232_id,
|
||||
.probe = cm3232_probe,
|
||||
.remove = cm3232_remove,
|
||||
};
|
||||
|
||||
module_i2c_driver(cm3232_driver);
|
||||
|
||||
MODULE_AUTHOR("Kevin Tsai <ktsai@capellamicro.com>");
|
||||
MODULE_DESCRIPTION("CM3232 ambient light sensor driver");
|
||||
MODULE_LICENSE("GPL");
|
Загрузка…
Ссылка в новой задаче