From b359049f270dcaab8a5bbdbb966594c16caba16c Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 7 Feb 2007 22:19:12 -0600 Subject: [PATCH 1/6] [POWERPC] 83xx: Add base support for the MPC8313E RDB Add support for the MPC8313E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, and serial. Signed-off-by: Wilson Lo Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8313erdb.dts | 219 ++++++++++++++++++++++ arch/powerpc/platforms/83xx/Kconfig | 12 ++ arch/powerpc/platforms/83xx/Makefile | 1 + arch/powerpc/platforms/83xx/mpc8313_rdb.c | 99 ++++++++++ 4 files changed, 331 insertions(+) create mode 100644 arch/powerpc/boot/dts/mpc8313erdb.dts create mode 100644 arch/powerpc/platforms/83xx/mpc8313_rdb.c diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 000000000000..3d2f5a06df3f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,219 @@ +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8313ERDB"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 08000000>; // 128MB at 0 + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <13 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@4 { + linux,phandle = <2452004>; + interrupt-parent = <700>; + interrupts = <14 2>; + reg = <4>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 8 24 8 23 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + ethernet@25000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <22 8 21 8 20 8>; + interrupt-parent = <700>; + phy-handle = <2452004>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = ; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 700 12 8 + 7000 0 0 2 700 12 8 + 7000 0 0 3 700 12 8 + 7000 0 0 4 700 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 700 11 8 + 7800 0 0 2 700 12 8 + 7800 0 0 3 700 11 8 + 7800 0 0 4 700 12 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = ; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index edcd5b875b66..46883c5136ac 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -5,6 +5,12 @@ choice prompt "Machine Type" default MPC834x_SYS +config MPC8313_RDB + bool "Freescale MPC8313 RDB" + select DEFAULT_UIMAGE + help + This option enables support for the MPC8313 RDB board. + config MPC832x_MDS bool "Freescale MPC832x MDS" select DEFAULT_UIMAGE @@ -41,6 +47,12 @@ config MPC8360E_PB endchoice +config PPC_MPC831x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8313_RDB + config PPC_MPC832x bool select PPC_UDBG_16550 diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index f1aa7e24a938..0b732a79c0a8 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -3,6 +3,7 @@ # obj-y := misc.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c new file mode 100644 index 000000000000..c3b98c34eb6b --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -0,0 +1,99 @@ +/* + * arch/powerpc/platforms/83xx/mpc8313_rdb.c + * + * Description: MPC8313x RDB board specific routines. + * This file is based on mpc834x_sys.c + * Author: Lo Wlison + * + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include + +#include +#include +#include + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8313_rdb_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc8313_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif +} + +void __init mpc8313_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc8313_rdb_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8313ERDB")) + return 0; + + DBG("MPC8313 RDB found\n"); + + return 1; +} + +define_machine(mpc8313_rdb) { + .name = "MPC8313 RDB", + .probe = mpc8313_rdb_probe, + .setup_arch = mpc8313_rdb_setup_arch, + .init_IRQ = mpc8313_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; From fd9aeb85273e9eb4d1a0b83487576a2e22da67fc Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 7 Feb 2007 22:19:45 -0600 Subject: [PATCH 2/6] [POWERPC] 83xx: add the mpc8313erdb defconfig Add the mpc8313erdb defconfig Signed-off-by: Wilson Lo Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc8313_rdb_defconfig | 1409 ++++++++++++++++++++ 1 file changed, 1409 insertions(+) create mode 100644 arch/powerpc/configs/mpc8313_rdb_defconfig diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig new file mode 100644 index 000000000000..f87523716c44 --- /dev/null +++ b/arch/powerpc/configs/mpc8313_rdb_defconfig @@ -0,0 +1,1409 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Wed Feb 7 22:08:04 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC8313_RDB=y +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC8360E_PB is not set +CONFIG_PPC_MPC831x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# From ea5b7a61b606854bd17272cb0a751b6d0a8bfa6b Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:51:09 +0800 Subject: [PATCH 3/6] [POWERPC] 83xx: Added new dr_mode property for usb controller on 83xx Added a new dr_mode property to describe what mode the DR controller is being used in (host, device, OTG). Updated the MPC8349E MDS dts with this new property. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- Documentation/powerpc/booting-without-of.txt | 4 ++++ arch/powerpc/boot/dts/mpc8349emds.dts | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 33994271cb3b..3b514672b80e 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1334,6 +1334,9 @@ platforms are moved over to use the flattened-device-tree model. fsl-usb2-mph compatible controllers. Either this property or "port0" (or both) must be defined for "fsl-usb2-mph" compatible controllers. + - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible + controllers. Can be "host", "peripheral", or "otg". Default to + "host" if not defined for backward compatibility. Recommended properties : - interrupts : where a is the interrupt number and b is a @@ -1367,6 +1370,7 @@ platforms are moved over to use the flattened-device-tree model. #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 1>; + dr_mode = "otg"; phy = "ulpi"; }; diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts index efceb3432653..dc121b3cb4a9 100644 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ b/arch/powerpc/boot/dts/mpc8349emds.dts @@ -39,6 +39,11 @@ reg = <00000000 10000000>; // 256MB at 0 }; + bcsr@e2400000 { + device_type = "board-control"; + reg = ; + }; + soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -103,6 +108,7 @@ #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 2>; + dr_mode = "otg"; phy_type = "ulpi"; }; From c161698287f501e7ea229672383af7aefe8a2056 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:47:56 +0800 Subject: [PATCH 4/6] [POWERPC] 83xx: Add USB setup code for MPC8349E MDS-PB Add board specific initialization code for USB to work in both MPH and DR mode for MPC8349E MDS-PB board. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/mpc834x_sys.c | 73 +++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc83xx.h | 18 ++++++ 2 files changed, 91 insertions(+) diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index f30393f0b832..873ec543c361 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -43,6 +43,76 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if SYS board is plug into PIB board, + * force to use the PHY on SYS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + /* ************************************************************************ * * Setup the architecture @@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(np); } + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif + mpc834x_usb_cfg(); + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 01cae106912b..9cd03b59c8f4 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -4,6 +4,24 @@ #include #include +/* System Clock Control Register */ +#define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +/* system i/o configuration register low */ +#define MPC83XX_SICRL_OFFS 0x114 +#define MPC83XX_SICRL_USB0 0x40000000 +#define MPC83XX_SICRL_USB1 0x20000000 + +/* system i/o configuration register high */ +#define MPC83XX_SICRH_OFFS 0x118 +#define MPC83XX_SICRH_USB_UTMI 0x00020000 + /* * Declaration for the various functions exported by the * mpc83xx_* files. Mostly for use by mpc83xx_setup From 97c5a20ae68774b4c9246c4657be0d88317f103f Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 7 Feb 2007 13:49:24 +0800 Subject: [PATCH 5/6] [POWERPC] 83xx: Add platform_device for USB DR peripheral driver Add platform_device setup code for OTG/peripheral mode of 834x DR module. It is needed for USB client driver to work. Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_soc.c | 78 ++++++++++++++++++++++++++--------- 1 file changed, 59 insertions(+), 19 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 9f2a9a444bfb..34161bc5a02f 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void) { struct device_node *np; unsigned int i; - struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL; + struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL, + *usb_dev_dr_client = NULL; int ret; for (np = NULL, i = 0; @@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void) of_irq_to_resource(np, 0, &r[1]); - usb_dev_dr = - platform_device_register_simple("fsl-ehci", i, r, 2); - if (IS_ERR(usb_dev_dr)) { - ret = PTR_ERR(usb_dev_dr); + prop = get_property(np, "dr_mode", NULL); + + if (!prop || !strcmp(prop, "host")) { + usb_data.operating_mode = FSL_USB2_DR_HOST; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + } else if (prop && !strcmp(prop, "peripheral")) { + usb_data.operating_mode = FSL_USB2_DR_DEVICE; + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else if (prop && !strcmp(prop, "otg")) { + usb_data.operating_mode = FSL_USB2_DR_OTG; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else { + ret = -EINVAL; goto err; } - usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL; - usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask; - - usb_data.operating_mode = FSL_USB2_DR_HOST; - prop = get_property(np, "phy_type", NULL); usb_data.phy_mode = determine_usb_phy(prop); - ret = - platform_device_add_data(usb_dev_dr, &usb_data, - sizeof(struct - fsl_usb2_platform_data)); - if (ret) - goto unreg_dr; + if (usb_dev_dr_host) { + usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_host, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } + if (usb_dev_dr_client) { + usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_client, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } } return 0; unreg_dr: - if (usb_dev_dr) - platform_device_unregister(usb_dev_dr); + if (usb_dev_dr_host) + platform_device_unregister(usb_dev_dr_host); + if (usb_dev_dr_client) + platform_device_unregister(usb_dev_dr_client); unreg_mph: if (usb_dev_mph) platform_device_unregister(usb_dev_mph); @@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void) if (ret) goto unreg; } - + of_node_put(phy); of_node_put(mdio); From 49baa91d6863df480fa05eb57524a274f77fa886 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 8 Feb 2007 01:11:00 -0600 Subject: [PATCH 6/6] [POWERPC] 83xx: Updated and renamed MPC834x SYS to MPC834x MDS The MPC834x SYS board has always been called the MPC834x MDS since its public release. Removed all references to SYS and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc834x_mds*). Signed-off-by: Kumar Gala --- .../dts/{mpc8349emds.dts => mpc834x_mds.dts} | 0 arch/powerpc/configs/mpc834x_mds_defconfig | 9 ++++--- arch/powerpc/platforms/83xx/Kconfig | 12 ++++----- arch/powerpc/platforms/83xx/Makefile | 2 +- arch/powerpc/platforms/83xx/mpc834x_itx.c | 2 -- .../83xx/{mpc834x_sys.c => mpc834x_mds.c} | 26 +++++++++---------- arch/powerpc/platforms/83xx/mpc834x_sys.h | 23 ---------------- 7 files changed, 25 insertions(+), 49 deletions(-) rename arch/powerpc/boot/dts/{mpc8349emds.dts => mpc834x_mds.dts} (100%) rename arch/powerpc/platforms/83xx/{mpc834x_sys.c => mpc834x_mds.c} (89%) delete mode 100644 arch/powerpc/platforms/83xx/mpc834x_sys.h diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts similarity index 100% rename from arch/powerpc/boot/dts/mpc8349emds.dts rename to arch/powerpc/boot/dts/mpc834x_mds.dts diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig index 9eaed3a36983..2e3f8efb6ab1 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:27 2007 +# Linux kernel version: 2.6.20 +# Thu Feb 8 01:00:48 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y # # Platform support # +# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -CONFIG_MPC834x_SYS=y +CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 46883c5136ac..1aea1e69ff31 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -3,7 +3,7 @@ menu "Platform support" choice prompt "Machine Type" - default MPC834x_SYS + default MPC834x_MDS config MPC8313_RDB bool "Freescale MPC8313 RDB" @@ -18,13 +18,13 @@ config MPC832x_MDS help This option enables support for the MPC832x MDS evaluation board. -config MPC834x_SYS - bool "Freescale MPC834x SYS" +config MPC834x_MDS + bool "Freescale MPC834x MDS" select DEFAULT_UIMAGE help - This option enables support for the MPC 834x SYS evaluation board. + This option enables support for the MPC 834x MDS evaluation board. - Be aware that PCI buses can only function when SYS board is plugged + Be aware that PCI buses can only function when MDS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's responsibility. @@ -63,7 +63,7 @@ config MPC834x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC834x_SYS || MPC834x_ITX + default y if MPC834x_MDS || MPC834x_ITX config PPC_MPC836x bool diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 0b732a79c0a8..6c8199c4c382 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -4,7 +4,7 @@ obj-y := misc.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o +obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 2446dea9407e..443a3172f370 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -38,8 +38,6 @@ #include "mpc83xx.h" -#include - #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c similarity index 89% rename from arch/powerpc/platforms/83xx/mpc834x_sys.c rename to arch/powerpc/platforms/83xx/mpc834x_mds.c index 873ec543c361..d2736da76c46 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -1,7 +1,7 @@ /* - * arch/powerpc/platforms/83xx/mpc834x_sys.c + * arch/powerpc/platforms/83xx/mpc834x_mds.c * - * MPC834x SYS board specific routines + * MPC834x MDS board specific routines * * Maintainer: Kumar Gala * @@ -103,8 +103,8 @@ static int mpc834x_usb_cfg(void) return -1; /* - * if SYS board is plug into PIB board, - * force to use the PHY on SYS board + * if MDS board is plug into PIB board, + * force to use the PHY on MDS board */ bcsr5 = in_8(bcsr_regs + 5); if (!(bcsr5 & BCSR5_INT_USB)) @@ -118,12 +118,12 @@ static int mpc834x_usb_cfg(void) * Setup the architecture * */ -static void __init mpc834x_sys_setup_arch(void) +static void __init mpc834x_mds_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("mpc834x_sys_setup_arch()", 0); + ppc_md.progress("mpc834x_mds_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np != 0) { @@ -152,7 +152,7 @@ static void __init mpc834x_sys_setup_arch(void) #endif } -static void __init mpc834x_sys_init_IRQ(void) +static void __init mpc834x_mds_init_IRQ(void) { struct device_node *np; @@ -192,7 +192,7 @@ late_initcall(mpc834x_rtc_hookup); /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init mpc834x_sys_probe(void) +static int __init mpc834x_mds_probe(void) { /* We always match for now, eventually we should look at the flat dev tree to ensure this is the board we are suppose to run on @@ -200,11 +200,11 @@ static int __init mpc834x_sys_probe(void) return 1; } -define_machine(mpc834x_sys) { - .name = "MPC834x SYS", - .probe = mpc834x_sys_probe, - .setup_arch = mpc834x_sys_setup_arch, - .init_IRQ = mpc834x_sys_init_IRQ, +define_machine(mpc834x_mds) { + .name = "MPC834x MDS", + .probe = mpc834x_mds_probe, + .setup_arch = mpc834x_mds_setup_arch, + .init_IRQ = mpc834x_mds_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h deleted file mode 100644 index 7d5bbef084e7..000000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.h - * - * MPC834X SYS common board definitions - * - * Maintainer: Kumar Gala - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC83XX_SYS_H__ -#define __MACH_MPC83XX_SYS_H__ - -#define PIRQA MPC83xx_IRQ_EXT4 -#define PIRQB MPC83xx_IRQ_EXT5 -#define PIRQC MPC83xx_IRQ_EXT6 -#define PIRQD MPC83xx_IRQ_EXT7 - -#endif /* __MACH_MPC83XX_SYS_H__ */