[ARM] 4363/1: AT91: Remove legacy PIO definitions

Remove the legacy PIO pin definitions for the AT91 processors.
The standard (and portable between the different AT91 processors) method
is to use the AT91_PIN_* defines and the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Andrew Victor 2007-05-08 07:51:23 +01:00 коммит произвёл Russell King
Родитель 8eef3896b3
Коммит b85fe92766
4 изменённых файлов: 0 добавлений и 389 удалений

Просмотреть файл

@ -107,185 +107,4 @@
#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
#if 0
/*
* PIO pin definitions (peripheral A/B multiplexing).
*/
#define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */
#define AT91_PA0_PCK3 (1 << 0) /* B: PMC Programmable Clock Output 3 */
#define AT91_PA1_MOSI (1 << 1) /* A: SPI Master-Out Slave-In */
#define AT91_PA1_PCK0 (1 << 1) /* B: PMC Programmable Clock Output 0 */
#define AT91_PA2_SPCK (1 << 2) /* A: SPI Serial Clock */
#define AT91_PA2_IRQ4 (1 << 2) /* B: External Interrupt 4 */
#define AT91_PA3_NPCS0 (1 << 3) /* A: SPI Peripheral Chip Select 0 */
#define AT91_PA3_IRQ5 (1 << 3) /* B: External Interrupt 5 */
#define AT91_PA4_NPCS1 (1 << 4) /* A: SPI Peripheral Chip Select 1 */
#define AT91_PA4_PCK1 (1 << 4) /* B: PMC Programmable Clock Output 1 */
#define AT91_PA5_NPCS2 (1 << 5) /* A: SPI Peripheral Chip Select 2 */
#define AT91_PA5_TXD3 (1 << 5) /* B: USART Transmit Data 3 */
#define AT91_PA6_NPCS3 (1 << 6) /* A: SPI Peripheral Chip Select 3 */
#define AT91_PA6_RXD3 (1 << 6) /* B: USART Receive Data 3 */
#define AT91_PA7_ETXCK_EREFCK (1 << 7) /* A: Ethernet Reference Clock / Transmit Clock */
#define AT91_PA7_PCK2 (1 << 7) /* B: PMC Programmable Clock Output 2 */
#define AT91_PA8_ETXEN (1 << 8) /* A: Ethernet Transmit Enable */
#define AT91_PA8_MCCDB (1 << 8) /* B: MMC Multimedia Card B Command */
#define AT91_PA9_ETX0 (1 << 9) /* A: Ethernet Transmit Data 0 */
#define AT91_PA9_MCDB0 (1 << 9) /* B: MMC Multimedia Card B Data 0 */
#define AT91_PA10_ETX1 (1 << 10) /* A: Ethernet Transmit Data 1 */
#define AT91_PA10_MCDB1 (1 << 10) /* B: MMC Multimedia Card B Data 1 */
#define AT91_PA11_ECRS_ECRSDV (1 << 11) /* A: Ethernet Carrier Sense / Data Valid */
#define AT91_PA11_MCDB2 (1 << 11) /* B: MMC Multimedia Card B Data 2 */
#define AT91_PA12_ERX0 (1 << 12) /* A: Ethernet Receive Data 0 */
#define AT91_PA12_MCDB3 (1 << 12) /* B: MMC Multimedia Card B Data 3 */
#define AT91_PA13_ERX1 (1 << 13) /* A: Ethernet Receive Data 1 */
#define AT91_PA13_TCLK0 (1 << 13) /* B: TC External Clock Input 0 */
#define AT91_PA14_ERXER (1 << 14) /* A: Ethernet Receive Error */
#define AT91_PA14_TCLK1 (1 << 14) /* B: TC External Clock Input 1 */
#define AT91_PA15_EMDC (1 << 15) /* A: Ethernet Management Data Clock */
#define AT91_PA15_TCLK2 (1 << 15) /* B: TC External Clock Input 2 */
#define AT91_PA16_EMDIO (1 << 16) /* A: Ethernet Management Data I/O */
#define AT91_PA16_IRQ6 (1 << 16) /* B: External Interrupt 6 */
#define AT91_PA17_TXD0 (1 << 17) /* A: USART Transmit Data 0 */
#define AT91_PA17_TIOA0 (1 << 17) /* B: TC I/O Line A 0 */
#define AT91_PA18_RXD0 (1 << 18) /* A: USART Receive Data 0 */
#define AT91_PA18_TIOB0 (1 << 18) /* B: TC I/O Line B 0 */
#define AT91_PA19_SCK0 (1 << 19) /* A: USART Serial Clock 0 */
#define AT91_PA19_TIOA1 (1 << 19) /* B: TC I/O Line A 1 */
#define AT91_PA20_CTS0 (1 << 20) /* A: USART Clear To Send 0 */
#define AT91_PA20_TIOB1 (1 << 20) /* B: TC I/O Line B 1 */
#define AT91_PA21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
#define AT91_PA21_TIOA2 (1 << 21) /* B: TC I/O Line A 2 */
#define AT91_PA22_RXD2 (1 << 22) /* A: USART Receive Data 2 */
#define AT91_PA22_TIOB2 (1 << 22) /* B: TC I/O Line B 2 */
#define AT91_PA23_TXD2 (1 << 23) /* A: USART Transmit Data 2 */
#define AT91_PA23_IRQ3 (1 << 23) /* B: External Interrupt 3 */
#define AT91_PA24_SCK2 (1 << 24) /* A: USART Serial Clock 2 */
#define AT91_PA24_PCK1 (1 << 24) /* B: PMC Programmable Clock Output 1 */
#define AT91_PA25_TWD (1 << 25) /* A: TWI Two-wire Serial Data */
#define AT91_PA25_IRQ2 (1 << 25) /* B: External Interrupt 2 */
#define AT91_PA26_TWCK (1 << 26) /* A: TWI Two-wire Serial Clock */
#define AT91_PA26_IRQ1 (1 << 26) /* B: External Interrupt 1 */
#define AT91_PA27_MCCK (1 << 27) /* A: MMC Multimedia Card Clock */
#define AT91_PA27_TCLK3 (1 << 27) /* B: TC External Clock Input 3 */
#define AT91_PA28_MCCDA (1 << 28) /* A: MMC Multimedia Card A Command */
#define AT91_PA28_TCLK4 (1 << 28) /* B: TC External Clock Input 4 */
#define AT91_PA29_MCDA0 (1 << 29) /* A: MMC Multimedia Card A Data 0 */
#define AT91_PA29_TCLK5 (1 << 29) /* B: TC External Clock Input 5 */
#define AT91_PA30_DRXD (1 << 30) /* A: DBGU Receive Data */
#define AT91_PA30_CTS2 (1 << 30) /* B: USART Clear To Send 2 */
#define AT91_PA31_DTXD (1 << 31) /* A: DBGU Transmit Data */
#define AT91_PA31_RTS2 (1 << 31) /* B: USART Ready To Send 2 */
#define AT91_PB0_TF0 (1 << 0) /* A: SSC Transmit Frame Sync 0 */
#define AT91_PB0_RTS3 (1 << 0) /* B: USART Ready To Send 3 */
#define AT91_PB1_TK0 (1 << 1) /* A: SSC Transmit Clock 0 */
#define AT91_PB1_CTS3 (1 << 1) /* B: USART Clear To Send 3 */
#define AT91_PB2_TD0 (1 << 2) /* A: SSC Transmit Data 0 */
#define AT91_PB2_SCK3 (1 << 2) /* B: USART Serial Clock 3 */
#define AT91_PB3_RD0 (1 << 3) /* A: SSC Receive Data 0 */
#define AT91_PB3_MCDA1 (1 << 3) /* B: MMC Multimedia Card A Data 1 */
#define AT91_PB4_RK0 (1 << 4) /* A: SSC Receive Clock 0 */
#define AT91_PB4_MCDA2 (1 << 4) /* B: MMC Multimedia Card A Data 2 */
#define AT91_PB5_RF0 (1 << 5) /* A: SSC Receive Frame Sync 0 */
#define AT91_PB5_MCDA3 (1 << 5) /* B: MMC Multimedia Card A Data 3 */
#define AT91_PB6_TF1 (1 << 6) /* A: SSC Transmit Frame Sync 1 */
#define AT91_PB6_TIOA3 (1 << 6) /* B: TC I/O Line A 3 */
#define AT91_PB7_TK1 (1 << 7) /* A: SSC Transmit Clock 1 */
#define AT91_PB7_TIOB3 (1 << 7) /* B: TC I/O Line B 3 */
#define AT91_PB8_TD1 (1 << 8) /* A: SSC Transmit Data 1 */
#define AT91_PB8_TIOA4 (1 << 8) /* B: TC I/O Line A 4 */
#define AT91_PB9_RD1 (1 << 9) /* A: SSC Receive Data 1 */
#define AT91_PB9_TIOB4 (1 << 9) /* B: TC I/O Line B 4 */
#define AT91_PB10_RK1 (1 << 10) /* A: SSC Receive Clock 1 */
#define AT91_PB10_TIOA5 (1 << 10) /* B: TC I/O Line A 5 */
#define AT91_PB11_RF1 (1 << 11) /* A: SSC Receive Frame Sync 1 */
#define AT91_PB11_TIOB5 (1 << 11) /* B: TC I/O Line B 5 */
#define AT91_PB12_TF2 (1 << 12) /* A: SSC Transmit Frame Sync 2 */
#define AT91_PB12_ETX2 (1 << 12) /* B: Ethernet Transmit Data 2 */
#define AT91_PB13_TK2 (1 << 13) /* A: SSC Transmit Clock 3 */
#define AT91_PB13_ETX3 (1 << 13) /* B: Ethernet Transmit Data 3 */
#define AT91_PB14_TD2 (1 << 14) /* A: SSC Transmit Data 2 */
#define AT91_PB14_ETXER (1 << 14) /* B: Ethernet Transmit Coding Error */
#define AT91_PB15_RD2 (1 << 15) /* A: SSC Receive Data 2 */
#define AT91_PB15_ERX2 (1 << 15) /* B: Ethernet Receive Data 2 */
#define AT91_PB16_RK2 (1 << 16) /* A: SSC Receive Clock 2 */
#define AT91_PB16_ERX3 (1 << 16) /* B: Ethernet Receive Data 3 */
#define AT91_PB17_RF2 (1 << 17) /* A: SSC Receive Frame Sync 2 */
#define AT91_PB17_ERXDV (1 << 17) /* B: Ethernet Receive Data Valid */
#define AT91_PB18_RI1 (1 << 18) /* A: USART Ring Indicator 1 */
#define AT91_PB18_ECOL (1 << 18) /* B: Ethernet Collision Detected */
#define AT91_PB19_DTR1 (1 << 19) /* A: USART Data Terminal Ready 1 */
#define AT91_PB19_ERXCK (1 << 19) /* B: Ethernet Receive Clock */
#define AT91_PB20_TXD1 (1 << 20) /* A: USART Transmit Data 1 */
#define AT91_PB21_RXD1 (1 << 21) /* A: USART Receive Data 1 */
#define AT91_PB22_SCK1 (1 << 22) /* A: USART Serial Clock 1 */
#define AT91_PB23_DCD1 (1 << 23) /* A: USART Data Carrier Detect 1 */
#define AT91_PB24_CTS1 (1 << 24) /* A: USART Clear To Send 1 */
#define AT91_PB25_DSR1 (1 << 25) /* A: USART Data Set Ready 1 */
#define AT91_PB25_EF100 (1 << 25) /* B: Ethernet Force 100 Mbit */
#define AT91_PB26_RTS1 (1 << 26) /* A: USART Ready To Send 1 */
#define AT91_PB27_PCK0 (1 << 27) /* B: PMC Programmable Clock Output 0 */
#define AT91_PB28_FIQ (1 << 28) /* A: Fast Interrupt */
#define AT91_PB29_IRQ0 (1 << 29) /* A: External Interrupt 0 */
#define AT91_PC0_BFCK (1 << 0) /* A: Burst Flash Clock */
#define AT91_PC1_BFRDY_SMOE (1 << 1) /* A: Burst Flash Ready / SmartMedia Output Enable */
#define AT91_PC2_BFAVD (1 << 2) /* A: Burst Flash Address Valid */
#define AT91_PC3_BFBAA_SMWE (1 << 3) /* A: Burst Flash Address Advance / SmartMedia Write Enable */
#define AT91_PC4_BFOE (1 << 4) /* A: Burst Flash Output Enable */
#define AT91_PC5_BFWE (1 << 5) /* A: Burst Flash Write Enable */
#define AT91_PC6_NWAIT (1 << 6) /* A: SMC Wait Signal */
#define AT91_PC7_A23 (1 << 7) /* A: Address Bus 23 */
#define AT91_PC8_A24 (1 << 8) /* A: Address Bus 24 */
#define AT91_PC9_A25_CFRNW (1 << 9) /* A: Address Bus 25 / Compact Flash Read Not Write */
#define AT91_PC10_NCS4_CFCS (1 << 10) /* A: SMC Chip Select 4 / Compact Flash Chip Select */
#define AT91_PC11_NCS5_CFCE1 (1 << 11) /* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
#define AT91_PC12_NCS6_CFCE2 (1 << 12) /* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
#define AT91_PC13_NCS7 (1 << 13) /* A: Chip Select 7 */
#define AT91_PD0_ETX0 (1 << 0) /* A: Ethernet Transmit Data 0 */
#define AT91_PD1_ETX1 (1 << 1) /* A: Ethernet Transmit Data 1 */
#define AT91_PD2_ETX2 (1 << 2) /* A: Ethernet Transmit Data 2 */
#define AT91_PD3_ETX3 (1 << 3) /* A: Ethernet Transmit Data 3 */
#define AT91_PD4_ETXEN (1 << 4) /* A: Ethernet Transmit Enable */
#define AT91_PD5_ETXER (1 << 5) /* A: Ethernet Transmit Coding Error */
#define AT91_PD6_DTXD (1 << 6) /* A: DBGU Transmit Data */
#define AT91_PD7_PCK0 (1 << 7) /* A: PMC Programmable Clock Output 0 */
#define AT91_PD7_TSYNC (1 << 7) /* B: ETM Trace Synchronization Signal */
#define AT91_PD8_PCK1 (1 << 8) /* A: PMC Programmable Clock Output 1 */
#define AT91_PD8_TCLK (1 << 8) /* B: ETM Trace Clock */
#define AT91_PD9_PCK2 (1 << 9) /* A: PMC Programmable Clock Output 2 */
#define AT91_PD9_TPS0 (1 << 9) /* B: ETM Trace ARM Pipeline Status 0 */
#define AT91_PD10_PCK3 (1 << 10) /* A: PMC Programmable Clock Output 3 */
#define AT91_PD10_TPS1 (1 << 10) /* B: ETM Trace ARM Pipeline Status 1 */
#define AT91_PD11_TPS2 (1 << 11) /* B: ETM Trace ARM Pipeline Status 2 */
#define AT91_PD12_TPK0 (1 << 12) /* B: ETM Trace Packet Port 0 */
#define AT91_PD13_TPK1 (1 << 13) /* B: ETM Trace Packet Port 1 */
#define AT91_PD14_TPK2 (1 << 14) /* B: ETM Trace Packet Port 2 */
#define AT91_PD15_TD0 (1 << 15) /* A: SSC Transmit Data 0 */
#define AT91_PD15_TPK3 (1 << 15) /* B: ETM Trace Packet Port 3 */
#define AT91_PD16_TD1 (1 << 16) /* A: SSC Transmit Data 1 */
#define AT91_PD16_TPK4 (1 << 16) /* B: ETM Trace Packet Port 4 */
#define AT91_PD17_TD2 (1 << 17) /* A: SSC Transmit Data 2 */
#define AT91_PD17_TPK5 (1 << 17) /* B: ETM Trace Packet Port 5 */
#define AT91_PD18_NPCS1 (1 << 18) /* A: SPI Peripheral Chip Select 1 */
#define AT91_PD18_TPK6 (1 << 18) /* B: ETM Trace Packet Port 6 */
#define AT91_PD19_NPCS2 (1 << 19) /* A: SPI Peripheral Chip Select 2 */
#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */
#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */
#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */
#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */
#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */
#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */
#define AT91_PD23_RTS2 (1 << 23) /* A: USART Ready To Send 2 */
#define AT91_PD23_TPK11 (1 << 23) /* B: ETM Trace Packet Port 11 */
#define AT91_PD24_RTS3 (1 << 24) /* A: USART Ready To Send 3 */
#define AT91_PD24_TPK12 (1 << 24) /* B: ETM Trace Packet Port 12 */
#define AT91_PD25_DTR1 (1 << 25) /* A: USART Data Terminal Ready 1 */
#define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */
#define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */
#define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */
#endif
#endif

Просмотреть файл

@ -117,13 +117,4 @@
#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
#if 0
/*
* PIO pin definitions (peripheral A/B multiplexing).
*/
// TODO: Add
#endif
#endif

Просмотреть файл

@ -98,195 +98,4 @@
#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
#if 0
/*
* PIO pin definitions (peripheral A/B multiplexing).
*/
#define AT91_PA0_SPI0_MISO (1 << 0) /* A: SPI0 Master In Slave */
#define AT91_PA0_MCDA0 (1 << 0) /* B: Multimedia Card A Data 0 */
#define AT91_PA1_SPI0_MOSI (1 << 1) /* A: SPI0 Master Out Slave */
#define AT91_PA1_MCCDA (1 << 1) /* B: Multimedia Card A Command */
#define AT91_PA2_SPI0_SPCK (1 << 2) /* A: SPI0 Serial Clock */
#define AT91_PA2_MCCK (1 << 2) /* B: Multimedia Card Clock */
#define AT91_PA3_SPI0_NPCS0 (1 << 3) /* A: SPI0 Peripheral Chip Select 0 */
#define AT91_PA4_SPI0_NPCS1 (1 << 4) /* A: SPI0 Peripheral Chip Select 1 */
#define AT91_PA4_MCDA1 (1 << 4) /* B: Multimedia Card A Data 1 */
#define AT91_PA5_SPI0_NPCS2 (1 << 5) /* A: SPI0 Peripheral Chip Select 2 */
#define AT91_PA5_MCDA2 (1 << 5) /* B: Multimedia Card A Data 2 */
#define AT91_PA6_SPI0_NPCS3 (1 << 6) /* A: SPI0 Peripheral Chip Select 3 */
#define AT91_PA6_MCDA3 (1 << 6) /* B: Multimedia Card A Data 3 */
#define AT91_PA7_TWD (1 << 7) /* A: TWI Two-wire Serial Data */
#define AT91_PA7_PCK0 (1 << 7) /* B: PMC Programmable clock Output 0 */
#define AT91_PA8_TWCK (1 << 8) /* A: TWI Two-wire Serial Clock */
#define AT91_PA8_PCK1 (1 << 8) /* B: PMC Programmable clock Output 1 */
#define AT91_PA9_DRXD (1 << 9) /* A: DBGU Debug Receive Data */
#define AT91_PA9_PCK2 (1 << 9) /* B: PMC Programmable clock Output 2 */
#define AT91_PA10_DTXD (1 << 10) /* A: DBGU Debug Transmit Data */
#define AT91_PA10_PCK3 (1 << 10) /* B: PMC Programmable clock Output 3 */
#define AT91_PA11_TSYNC (1 << 11) /* A: Trace Synchronization Signal */
#define AT91_PA11_SCK1 (1 << 11) /* B: USART1 Serial Clock */
#define AT91_PA12_TCLK (1 << 12) /* A: Trace Clock */
#define AT91_PA12_RTS1 (1 << 12) /* B: USART1 Ready To Send */
#define AT91_PA13_TPS0 (1 << 13) /* A: Trace ARM Pipeline Status 0 */
#define AT91_PA13_CTS1 (1 << 13) /* B: USART1 Clear To Send */
#define AT91_PA14_TPS1 (1 << 14) /* A: Trace ARM Pipeline Status 1 */
#define AT91_PA14_SCK2 (1 << 14) /* B: USART2 Serial Clock */
#define AT91_PA15_TPS2 (1 << 15) /* A: Trace ARM Pipeline Status 2 */
#define AT91_PA15_RTS2 (1 << 15) /* B: USART2 Ready To Send */
#define AT91_PA16_TPK0 (1 << 16) /* A: Trace Packet Port 0 */
#define AT91_PA16_CTS2 (1 << 16) /* B: USART2 Clear To Send */
#define AT91_PA17_TPK1 (1 << 17) /* A: Trace Packet Port 1 */
#define AT91_PA17_TF1 (1 << 17) /* B: SSC1 Transmit Frame Sync */
#define AT91_PA18_TPK2 (1 << 18) /* A: Trace Packet Port 2 */
#define AT91_PA18_TK1 (1 << 18) /* B: SSC1 Transmit Clock */
#define AT91_PA19_TPK3 (1 << 19) /* A: Trace Packet Port 3 */
#define AT91_PA19_TD1 (1 << 19) /* B: SSC1 Transmit Data */
#define AT91_PA20_TPK4 (1 << 20) /* A: Trace Packet Port 4 */
#define AT91_PA20_RD1 (1 << 20) /* B: SSC1 Receive Data */
#define AT91_PA21_TPK5 (1 << 21) /* A: Trace Packet Port 5 */
#define AT91_PA21_RK1 (1 << 21) /* B: SSC1 Receive Clock */
#define AT91_PA22_TPK6 (1 << 22) /* A: Trace Packet Port 6 */
#define AT91_PA22_RF1 (1 << 22) /* B: SSC1 Receive Frame Sync */
#define AT91_PA23_TPK7 (1 << 23) /* A: Trace Packet Port 7 */
#define AT91_PA23_RTS0 (1 << 23) /* B: USART0 Ready To Send */
#define AT91_PA24_TPK8 (1 << 24) /* A: Trace Packet Port 8 */
#define AT91_PA24_SPI1_NPCS1 (1 << 24) /* B: SPI1 Peripheral Chip Select 1 */
#define AT91_PA25_TPK9 (1 << 25) /* A: Trace Packet Port 9 */
#define AT91_PA25_SPI1_NPCS2 (1 << 25) /* B: SPI1 Peripheral Chip Select 2 */
#define AT91_PA26_TPK10 (1 << 26) /* A: Trace Packet Port 10 */
#define AT91_PA26_SPI1_NPCS3 (1 << 26) /* B: SPI1 Peripheral Chip Select 3 */
#define AT91_PA27_TPK11 (1 << 27) /* A: Trace Packet Port 11 */
#define AT91_PA27_SPI0_NPCS1 (1 << 27) /* B: SPI0 Peripheral Chip Select 1 */
#define AT91_PA28_TPK12 (1 << 28) /* A: Trace Packet Port 12 */
#define AT91_PA28_SPI0_NPCS2 (1 << 28) /* B: SPI0 Peripheral Chip Select 2 */
#define AT91_PA29_TPK13 (1 << 29) /* A: Trace Packet Port 13 */
#define AT91_PA29_SPI0_NPCS3 (1 << 29) /* B: SPI0 Peripheral Chip Select 3 */
#define AT91_PA30_TPK14 (1 << 30) /* A: Trace Packet Port 14 */
#define AT91_PA30_A23 (1 << 30) /* B: Address Bus bit 23 */
#define AT91_PA31_TPK15 (1 << 31) /* A: Trace Packet Port 15 */
#define AT91_PA31_A24 (1 << 31) /* B: Address Bus bit 24 */
#define AT91_PB0_LCDVSYNC (1 << 0) /* A: LCD Vertical Synchronization */
#define AT91_PB1_LCDHSYNC (1 << 1) /* A: LCD Horizontal Synchronization */
#define AT91_PB2_LCDDOTCK (1 << 2) /* A: LCD Dot Clock */
#define AT91_PB2_PCK0 (1 << 2) /* B: PMC Programmable clock Output 0 */
#define AT91_PB3_LCDDEN (1 << 3) /* A: LCD Data Enable */
#define AT91_PB4_LCDCC (1 << 4) /* A: LCD Contrast Control */
#define AT91_PB4_LCDD2 (1 << 4) /* B: LCD Data Bus Bit 2 */
#define AT91_PB5_LCDD0 (1 << 5) /* A: LCD Data Bus Bit 0 */
#define AT91_PB5_LCDD3 (1 << 5) /* B: LCD Data Bus Bit 3 */
#define AT91_PB6_LCDD1 (1 << 6) /* A: LCD Data Bus Bit 1 */
#define AT91_PB6_LCDD4 (1 << 6) /* B: LCD Data Bus Bit 4 */
#define AT91_PB7_LCDD2 (1 << 7) /* A: LCD Data Bus Bit 2 */
#define AT91_PB7_LCDD5 (1 << 7) /* B: LCD Data Bus Bit 5 */
#define AT91_PB8_LCDD3 (1 << 8) /* A: LCD Data Bus Bit 3 */
#define AT91_PB8_LCDD6 (1 << 8) /* B: LCD Data Bus Bit 6 */
#define AT91_PB9_LCDD4 (1 << 9) /* A: LCD Data Bus Bit 4 */
#define AT91_PB9_LCDD7 (1 << 9) /* B: LCD Data Bus Bit 7 */
#define AT91_PB10_LCDD5 (1 << 10) /* A: LCD Data Bus Bit 5 */
#define AT91_PB10_LCDD10 (1 << 10) /* B: LCD Data Bus Bit 10 */
#define AT91_PB11_LCDD6 (1 << 11) /* A: LCD Data Bus Bit 6 */
#define AT91_PB11_LCDD11 (1 << 11) /* B: LCD Data Bus Bit 11 */
#define AT91_PB12_LCDD7 (1 << 12) /* A: LCD Data Bus Bit 7 */
#define AT91_PB12_LCDD12 (1 << 12) /* B: LCD Data Bus Bit 12 */
#define AT91_PB13_LCDD8 (1 << 13) /* A: LCD Data Bus Bit 8 */
#define AT91_PB13_LCDD13 (1 << 13) /* B: LCD Data Bus Bit 13 */
#define AT91_PB14_LCDD9 (1 << 14) /* A: LCD Data Bus Bit 9 */
#define AT91_PB14_LCDD14 (1 << 14) /* B: LCD Data Bus Bit 14 */
#define AT91_PB15_LCDD10 (1 << 15) /* A: LCD Data Bus Bit 10 */
#define AT91_PB15_LCDD15 (1 << 15) /* B: LCD Data Bus Bit 15 */
#define AT91_PB16_LCDD11 (1 << 16) /* A: LCD Data Bus Bit 11 */
#define AT91_PB16_LCDD19 (1 << 16) /* B: LCD Data Bus Bit 19 */
#define AT91_PB17_LCDD12 (1 << 17) /* A: LCD Data Bus Bit 12 */
#define AT91_PB17_LCDD20 (1 << 17) /* B: LCD Data Bus Bit 20 */
#define AT91_PB18_LCDD13 (1 << 18) /* A: LCD Data Bus Bit 13 */
#define AT91_PB18_LCDD21 (1 << 18) /* B: LCD Data Bus Bit 21 */
#define AT91_PB19_LCDD14 (1 << 19) /* A: LCD Data Bus Bit 14 */
#define AT91_PB19_LCDD22 (1 << 19) /* B: LCD Data Bus Bit 22 */
#define AT91_PB20_LCDD15 (1 << 20) /* A: LCD Data Bus Bit 15 */
#define AT91_PB20_LCDD23 (1 << 20) /* B: LCD Data Bus Bit 23 */
#define AT91_PB21_TF0 (1 << 21) /* A: SSC0 Transmit Frame Sync */
#define AT91_PB21_LCDD16 (1 << 21) /* B: LCD Data Bus Bit 16 */
#define AT91_PB22_TK0 (1 << 22) /* A: SSC0 Transmit Clock */
#define AT91_PB22_LCDD17 (1 << 22) /* B: LCD Data Bus Bit 17 */
#define AT91_PB23_TD0 (1 << 23) /* A: SSC0 Transmit Data */
#define AT91_PB23_LCDD18 (1 << 23) /* B: LCD Data Bus Bit 18 */
#define AT91_PB24_RD0 (1 << 24) /* A: SSC0 Receive Data */
#define AT91_PB24_LCDD19 (1 << 24) /* B: LCD Data Bus Bit 19 */
#define AT91_PB25_RK0 (1 << 25) /* A: SSC0 Receive Clock */
#define AT91_PB25_LCDD20 (1 << 25) /* B: LCD Data Bus Bit 20 */
#define AT91_PB26_RF0 (1 << 26) /* A: SSC0 Receive Frame Sync */
#define AT91_PB26_LCDD21 (1 << 26) /* B: LCD Data Bus Bit 21 */
#define AT91_PB27_SPI1_NPCS1 (1 << 27) /* A: SPI1 Peripheral Chip Select 1 */
#define AT91_PB27_LCDD22 (1 << 27) /* B: LCD Data Bus Bit 22 */
#define AT91_PB28_SPI1_NPCS0 (1 << 28) /* A: SPI1 Peripheral Chip Select 0 */
#define AT91_PB28_LCDD23 (1 << 28) /* B: LCD Data Bus Bit 23 */
#define AT91_PB29_SPI1_SPCK (1 << 29) /* A: SPI1 Serial Clock */
#define AT91_PB29_IRQ2 (1 << 29) /* B: Interrupt input 2 */
#define AT91_PB30_SPI1_MISO (1 << 30) /* A: SPI1 Master In Slave */
#define AT91_PB30_IRQ1 (1 << 30) /* B: Interrupt input 1 */
#define AT91_PB31_SPI1_MOSI (1 << 31) /* A: SPI1 Master Out Slave */
#define AT91_PB31_PCK2 (1 << 31) /* B: PMC Programmable clock Output 2 */
#define AT91_PC0_SMOE (1 << 0) /* A: SmartMedia Output Enable */
#define AT91_PC0_NCS6 (1 << 0) /* B: Chip Select 6 */
#define AT91_PC1_SMWE (1 << 1) /* A: SmartMedia Write Enable */
#define AT91_PC1_NCS7 (1 << 1) /* B: Chip Select 7 */
#define AT91_PC2_NWAIT (1 << 2) /* A: NWAIT */
#define AT91_PC2_IRQ0 (1 << 2) /* B: Interrupt input 0 */
#define AT91_PC3_A25_CFRNW (1 << 3) /* A: Address Bus[25] / Compact Flash Read Not Write */
#define AT91_PC4_NCS4_CFCS0 (1 << 4) /* A: Chip Select 4 / CompactFlash Chip Select 0 */
#define AT91_PC5_NCS5_CFCS1 (1 << 5) /* A: Chip Select 5 / CompactFlash Chip Select 1 */
#define AT91_PC6_CFCE1 (1 << 6) /* A: CompactFlash Chip Enable 1 */
#define AT91_PC7_CFCE2 (1 << 7) /* A: CompactFlash Chip Enable 2 */
#define AT91_PC8_TXD0 (1 << 8) /* A: USART0 Transmit Data */
#define AT91_PC8_PCK2 (1 << 8) /* B: PMC Programmable clock Output 2 */
#define AT91_PC9_RXD0 (1 << 9) /* A: USART0 Receive Data */
#define AT91_PC9_PCK3 (1 << 9) /* B: PMC Programmable clock Output 3 */
#define AT91_PC10_RTS0 (1 << 10) /* A: USART0 Ready To Send */
#define AT91_PC10_SCK0 (1 << 10) /* B: USART0 Serial Clock */
#define AT91_PC11_CTS0 (1 << 11) /* A: USART0 Clear To Send */
#define AT91_PC11_FIQ (1 << 11) /* B: AIC Fast Interrupt Input */
#define AT91_PC12_TXD1 (1 << 12) /* A: USART1 Transmit Data */
#define AT91_PC12_NCS6 (1 << 12) /* B: Chip Select 6 */
#define AT91_PC13_RXD1 (1 << 13) /* A: USART1 Receive Data */
#define AT91_PC13_NCS7 (1 << 13) /* B: Chip Select 7 */
#define AT91_PC14_TXD2 (1 << 14) /* A: USART2 Transmit Data */
#define AT91_PC14_SPI1_NPCS2 (1 << 14) /* B: SPI1 Peripheral Chip Select 2 */
#define AT91_PC15_RXD2 (1 << 15) /* A: USART2 Receive Data */
#define AT91_PC15_SPI1_NPCS3 (1 << 15) /* B: SPI1 Peripheral Chip Select 3 */
#define AT91_PC16_D16 (1 << 16) /* A: Data Bus [16] */
#define AT91_PC16_TCLK0 (1 << 16) /* B: Timer Counter 0 external clock input */
#define AT91_PC17_D17 (1 << 17) /* A: Data Bus [17] */
#define AT91_PC17_TCLK1 (1 << 17) /* B: Timer Counter 1 external clock input */
#define AT91_PC18_D18 (1 << 18) /* A: Data Bus [18] */
#define AT91_PC18_TCLK2 (1 << 18) /* B: Timer Counter 2 external clock input */
#define AT91_PC19_D19 (1 << 19) /* A: Data Bus [19] */
#define AT91_PC19_TIOA0 (1 << 19) /* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
#define AT91_PC20_D20 (1 << 20) /* A: Data Bus [20] */
#define AT91_PC20_TIOB0 (1 << 20) /* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
#define AT91_PC21_D21 (1 << 21) /* A: Data Bus [21] */
#define AT91_PC21_TIOA1 (1 << 21) /* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
#define AT91_PC22_D22 (1 << 22) /* A: Data Bus [22] */
#define AT91_PC22_TIOB1 (1 << 22) /* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
#define AT91_PC23_D23 (1 << 23) /* A: Data Bus [23] */
#define AT91_PC23_TIOA2 (1 << 23) /* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
#define AT91_PC24_D24 (1 << 24) /* A: Data Bus [24] */
#define AT91_PC24_TIOB2 (1 << 24) /* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
#define AT91_PC25_D25 (1 << 25) /* A: Data Bus [25] */
#define AT91_PC25_TF2 (1 << 25) /* B: SSC2 Transmit Frame Sync */
#define AT91_PC26_D26 (1 << 26) /* A: Data Bus [26] */
#define AT91_PC26_TK2 (1 << 26) /* B: SSC2 Transmit Clock */
#define AT91_PC27_D27 (1 << 27) /* A: Data Bus [27] */
#define AT91_PC27_TD2 (1 << 27) /* B: SSC2 Transmit Data */
#define AT91_PC28_D28 (1 << 28) /* A: Data Bus [28] */
#define AT91_PC28_RD2 (1 << 28) /* B: SSC2 Receive Data */
#define AT91_PC29_D29 (1 << 29) /* A: Data Bus [29] */
#define AT91_PC29_RK2 (1 << 29) /* B: SSC2 Receive Clock */
#define AT91_PC30_D30 (1 << 30) /* A: Data Bus [30] */
#define AT91_PC30_RF2 (1 << 30) /* B: SSC2 Receive Frame Sync */
#define AT91_PC31_D31 (1 << 31) /* A: Data Bus [31] */
#define AT91_PC31_PCK1 (1 << 31) /* B: PMC Programmable clock Output 1 */
#endif
#endif

Просмотреть файл

@ -119,13 +119,5 @@
#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
#if 0
/*
* PIO pin definitions (peripheral A/B multiplexing).
*/
// TODO: Add
#endif
#endif