ASoC: sgtl5000: Read SGTL5000_CHIP_ID in i2c_probe()

The usual place for reading chip ID is inside i2c_probe, so move it there and
also convert it to regmap.

sgtl5000_enable_regulators() needs to read the chip revision, so keep the
revision check there.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/codecs/sgtl5000.c

@@ -1275,7 +1275,7 @@ static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec)
 
 static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
 {
-	u16 reg;
+	int reg;
 	int ret;
 	int rev;
 	int i;
@@ -1303,23 +1303,17 @@ static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
 	/* wait for all power rails bring up */
 	udelay(10);
 
-	/* read chip information */
-	reg = snd_soc_read(codec, SGTL5000_CHIP_ID);
-	if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
-	    SGTL5000_PARTID_PART_ID) {
-		dev_err(codec->dev,
-			"Device with ID register %x is not a sgtl5000\n", reg);
-		ret = -ENODEV;
-		goto err_regulator_disable;
-	}
-
-	rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
-	dev_info(codec->dev, "sgtl5000 revision 0x%x\n", rev);
-
 	/*
 	 * workaround for revision 0x11 and later,
 	 * roll back to use internal LDO
 	 */
+
+	ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, &reg);
+	if (ret)
+		goto err_regulator_disable;
+
+	rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
+
 	if (external_vddd && rev >= 0x11) {
 		/* disable all regulator first */
 		regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
@@ -1478,7 +1472,7 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
 			      const struct i2c_device_id *id)
 {
 	struct sgtl5000_priv *sgtl5000;
-	int ret;
+	int ret, reg, rev;
 
 	sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv),
 								GFP_KERNEL);
@@ -1492,6 +1486,21 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	/* read chip information */
+	ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, &reg);
+	if (ret)
+		return ret;
+
+	if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
+	    SGTL5000_PARTID_PART_ID) {
+		dev_err(&client->dev,
+			"Device with ID register %x is not a sgtl5000\n", reg);
+		return -ENODEV;
+	}
+
+	rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
+	dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev);
+
 	i2c_set_clientdata(client, sgtl5000);
 
 	ret = snd_soc_register_codec(&client->dev,