ARM: OMAP3: Add support for configuring MMC pins as GPIO pins
Some devices are using the MMC1 pins 4..8 as GPIO pins, and in this case they need to be configured for 1.8V IO voltage if not done by the bootloader as otherwise some devices like smsc911x won't work properly. Let's also make sure this register is saved and restored for idle. Cc: Tim Nordell <tim.nordell@logicpd.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Родитель
b787f68c36
Коммит
b96b332fd5
|
@ -112,6 +112,7 @@ struct omap3_control_regs {
|
|||
u32 csirxfe;
|
||||
u32 iva2_bootaddr;
|
||||
u32 iva2_bootmod;
|
||||
u32 wkup_ctrl;
|
||||
u32 debobs_0;
|
||||
u32 debobs_1;
|
||||
u32 debobs_2;
|
||||
|
@ -455,6 +456,7 @@ void omap3_control_save_context(void)
|
|||
omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
|
||||
control_context.iva2_bootmod =
|
||||
omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
|
||||
control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
|
||||
control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
|
||||
control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
|
||||
control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
|
||||
|
@ -512,6 +514,7 @@ void omap3_control_restore_context(void)
|
|||
OMAP343X_CONTROL_IVA2_BOOTADDR);
|
||||
omap_ctrl_writel(control_context.iva2_bootmod,
|
||||
OMAP343X_CONTROL_IVA2_BOOTMOD);
|
||||
omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
|
||||
omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
|
||||
omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
|
||||
omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
|
||||
|
|
|
@ -231,6 +231,9 @@
|
|||
#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
|
||||
|
||||
/* 34xx GENERAL_WKUP register offsets */
|
||||
#define OMAP34XX_CONTROL_WKUP_CTRL (OMAP343X_CONTROL_GENERAL_WKUP - 0x4)
|
||||
#define OMAP36XX_GPIO_IO_PWRDNZ BIT(6)
|
||||
|
||||
#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
|
||||
0x008 + (i))
|
||||
#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
|
||||
|
|
|
@ -44,6 +44,27 @@ static void __init omap2420_n8x0_legacy_init(void)
|
|||
#endif
|
||||
|
||||
#ifdef CONFIG_ARCH_OMAP3
|
||||
/*
|
||||
* Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
|
||||
* mode for MMC1 in case bootloader did not configure things.
|
||||
* Note that if the pins are used for MMC1, pbias-regulator
|
||||
* manages the IO voltage.
|
||||
*/
|
||||
static void __init omap3_gpio126_127_129(void)
|
||||
{
|
||||
u32 reg;
|
||||
|
||||
reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
|
||||
reg &= ~OMAP343X_PBIASLITEVMODE1;
|
||||
reg |= OMAP343X_PBIASLITEPWRDNZ1;
|
||||
omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
|
||||
if (cpu_is_omap3630()) {
|
||||
reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
|
||||
reg |= OMAP36XX_GPIO_IO_PWRDNZ;
|
||||
omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
|
||||
}
|
||||
}
|
||||
|
||||
static void __init hsmmc2_internal_input_clk(void)
|
||||
{
|
||||
u32 reg;
|
||||
|
@ -356,6 +377,7 @@ static struct pdata_init pdata_quirks[] __initdata = {
|
|||
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
|
||||
{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
|
||||
{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
|
||||
{ "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
|
||||
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
|
||||
{ "ti,am3517-evm", am3517_evm_legacy_init, },
|
||||
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
|
||||
|
|
Загрузка…
Ссылка в новой задаче