i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780
Adds the i2c bus controller driver for the Ingenic JZ4780 SoC. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Zubair Lutfullah Kakakhel
Wolfram Sang
Родитель
3b10db23c0
Коммит
ba92222ed6
|
|
@ -0,0 +1,35 @@
|
|||
* Ingenic JZ4780 I2C Bus controller
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "ingenic,jz4780-i2c"
|
||||
- reg: Should contain the address & size of the I2C controller registers.
|
||||
- interrupts: Should specify the interrupt provided by parent.
|
||||
- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
|
||||
- clock-frequency: desired I2C bus clock frequency in Hz.
|
||||
|
||||
Recommended properties:
|
||||
- pinctrl-names: should be "default";
|
||||
- pinctrl-0: phandle to pinctrl function
|
||||
|
||||
Optional properties:
|
||||
- interrupt-parent: Should be the phandle of the interrupt controller that
|
||||
delivers interrupts to the I2C block.
|
||||
|
||||
Example
|
||||
|
||||
/ {
|
||||
i2c4: i2c4@0x10054000 {
|
||||
compatible = "ingenic,jz4780-i2c";
|
||||
reg = <0x10054000 0x1000>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <56>;
|
||||
|
||||
clocks = <&cgu JZ4780_CLK_SMB4>;
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pins_i2c4_data>;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -583,6 +583,15 @@ config I2C_IOP3XX
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-iop3xx.
|
||||
|
||||
config I2C_JZ4780
|
||||
tristate "JZ4780 I2C controller interface support"
|
||||
depends on MACH_JZ4780 || COMPILE_TEST
|
||||
help
|
||||
If you say yes to this option, support will be included for the
|
||||
Ingenic JZ4780 I2C controller.
|
||||
|
||||
If you don't know what to do here, say N.
|
||||
|
||||
config I2C_KEMPLD
|
||||
tristate "Kontron COM I2C Controller"
|
||||
depends on MFD_KEMPLD
|
||||
|
|
|
|||
|
|
@ -56,6 +56,7 @@ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
|
|||
obj-$(CONFIG_I2C_IMG) += i2c-img-scb.o
|
||||
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
|
||||
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
|
||||
obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
|
||||
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
|
||||
obj-$(CONFIG_I2C_MESON) += i2c-meson.o
|
||||
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,832 @@
|
|||
/*
|
||||
* Ingenic JZ4780 I2C bus driver
|
||||
*
|
||||
* Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc.
|
||||
* Copyright (C) 2015 Imagination Technologies
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/completion.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/time.h>
|
||||
|
||||
#define JZ4780_I2C_CTRL 0x00
|
||||
#define JZ4780_I2C_TAR 0x04
|
||||
#define JZ4780_I2C_SAR 0x08
|
||||
#define JZ4780_I2C_DC 0x10
|
||||
#define JZ4780_I2C_SHCNT 0x14
|
||||
#define JZ4780_I2C_SLCNT 0x18
|
||||
#define JZ4780_I2C_FHCNT 0x1C
|
||||
#define JZ4780_I2C_FLCNT 0x20
|
||||
#define JZ4780_I2C_INTST 0x2C
|
||||
#define JZ4780_I2C_INTM 0x30
|
||||
#define JZ4780_I2C_RXTL 0x38
|
||||
#define JZ4780_I2C_TXTL 0x3C
|
||||
#define JZ4780_I2C_CINTR 0x40
|
||||
#define JZ4780_I2C_CRXUF 0x44
|
||||
#define JZ4780_I2C_CRXOF 0x48
|
||||
#define JZ4780_I2C_CTXOF 0x4C
|
||||
#define JZ4780_I2C_CRXREQ 0x50
|
||||
#define JZ4780_I2C_CTXABRT 0x54
|
||||
#define JZ4780_I2C_CRXDONE 0x58
|
||||
#define JZ4780_I2C_CACT 0x5C
|
||||
#define JZ4780_I2C_CSTP 0x60
|
||||
#define JZ4780_I2C_CSTT 0x64
|
||||
#define JZ4780_I2C_CGC 0x68
|
||||
#define JZ4780_I2C_ENB 0x6C
|
||||
#define JZ4780_I2C_STA 0x70
|
||||
#define JZ4780_I2C_TXABRT 0x80
|
||||
#define JZ4780_I2C_DMACR 0x88
|
||||
#define JZ4780_I2C_DMATDLR 0x8C
|
||||
#define JZ4780_I2C_DMARDLR 0x90
|
||||
#define JZ4780_I2C_SDASU 0x94
|
||||
#define JZ4780_I2C_ACKGC 0x98
|
||||
#define JZ4780_I2C_ENSTA 0x9C
|
||||
#define JZ4780_I2C_SDAHD 0xD0
|
||||
|
||||
#define JZ4780_I2C_CTRL_STPHLD BIT(7)
|
||||
#define JZ4780_I2C_CTRL_SLVDIS BIT(6)
|
||||
#define JZ4780_I2C_CTRL_REST BIT(5)
|
||||
#define JZ4780_I2C_CTRL_MATP BIT(4)
|
||||
#define JZ4780_I2C_CTRL_SATP BIT(3)
|
||||
#define JZ4780_I2C_CTRL_SPDF BIT(2)
|
||||
#define JZ4780_I2C_CTRL_SPDS BIT(1)
|
||||
#define JZ4780_I2C_CTRL_MD BIT(0)
|
||||
|
||||
#define JZ4780_I2C_STA_SLVACT BIT(6)
|
||||
#define JZ4780_I2C_STA_MSTACT BIT(5)
|
||||
#define JZ4780_I2C_STA_RFF BIT(4)
|
||||
#define JZ4780_I2C_STA_RFNE BIT(3)
|
||||
#define JZ4780_I2C_STA_TFE BIT(2)
|
||||
#define JZ4780_I2C_STA_TFNF BIT(1)
|
||||
#define JZ4780_I2C_STA_ACT BIT(0)
|
||||
|
||||
static const char * const jz4780_i2c_abrt_src[] = {
|
||||
"ABRT_7B_ADDR_NOACK",
|
||||
"ABRT_10ADDR1_NOACK",
|
||||
"ABRT_10ADDR2_NOACK",
|
||||
"ABRT_XDATA_NOACK",
|
||||
"ABRT_GCALL_NOACK",
|
||||
"ABRT_GCALL_READ",
|
||||
"ABRT_HS_ACKD",
|
||||
"SBYTE_ACKDET",
|
||||
"ABRT_HS_NORSTRT",
|
||||
"SBYTE_NORSTRT",
|
||||
"ABRT_10B_RD_NORSTRT",
|
||||
"ABRT_MASTER_DIS",
|
||||
"ARB_LOST",
|
||||
"SLVFLUSH_TXFIFO",
|
||||
"SLV_ARBLOST",
|
||||
"SLVRD_INTX",
|
||||
};
|
||||
|
||||
#define JZ4780_I2C_INTST_IGC BIT(11)
|
||||
#define JZ4780_I2C_INTST_ISTT BIT(10)
|
||||
#define JZ4780_I2C_INTST_ISTP BIT(9)
|
||||
#define JZ4780_I2C_INTST_IACT BIT(8)
|
||||
#define JZ4780_I2C_INTST_RXDN BIT(7)
|
||||
#define JZ4780_I2C_INTST_TXABT BIT(6)
|
||||
#define JZ4780_I2C_INTST_RDREQ BIT(5)
|
||||
#define JZ4780_I2C_INTST_TXEMP BIT(4)
|
||||
#define JZ4780_I2C_INTST_TXOF BIT(3)
|
||||
#define JZ4780_I2C_INTST_RXFL BIT(2)
|
||||
#define JZ4780_I2C_INTST_RXOF BIT(1)
|
||||
#define JZ4780_I2C_INTST_RXUF BIT(0)
|
||||
|
||||
#define JZ4780_I2C_INTM_MIGC BIT(11)
|
||||
#define JZ4780_I2C_INTM_MISTT BIT(10)
|
||||
#define JZ4780_I2C_INTM_MISTP BIT(9)
|
||||
#define JZ4780_I2C_INTM_MIACT BIT(8)
|
||||
#define JZ4780_I2C_INTM_MRXDN BIT(7)
|
||||
#define JZ4780_I2C_INTM_MTXABT BIT(6)
|
||||
#define JZ4780_I2C_INTM_MRDREQ BIT(5)
|
||||
#define JZ4780_I2C_INTM_MTXEMP BIT(4)
|
||||
#define JZ4780_I2C_INTM_MTXOF BIT(3)
|
||||
#define JZ4780_I2C_INTM_MRXFL BIT(2)
|
||||
#define JZ4780_I2C_INTM_MRXOF BIT(1)
|
||||
#define JZ4780_I2C_INTM_MRXUF BIT(0)
|
||||
|
||||
#define JZ4780_I2C_DC_READ BIT(8)
|
||||
|
||||
#define JZ4780_I2C_SDAHD_HDENB BIT(8)
|
||||
|
||||
#define JZ4780_I2C_ENB_I2C BIT(0)
|
||||
|
||||
#define JZ4780_I2CSHCNT_ADJUST(n) (((n) - 8) < 6 ? 6 : ((n) - 8))
|
||||
#define JZ4780_I2CSLCNT_ADJUST(n) (((n) - 1) < 8 ? 8 : ((n) - 1))
|
||||
#define JZ4780_I2CFHCNT_ADJUST(n) (((n) - 8) < 6 ? 6 : ((n) - 8))
|
||||
#define JZ4780_I2CFLCNT_ADJUST(n) (((n) - 1) < 8 ? 8 : ((n) - 1))
|
||||
|
||||
#define JZ4780_I2C_FIFO_LEN 16
|
||||
#define TX_LEVEL 3
|
||||
#define RX_LEVEL (JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1)
|
||||
|
||||
#define JZ4780_I2C_TIMEOUT 300
|
||||
|
||||
#define BUFSIZE 200
|
||||
|
||||
struct jz4780_i2c {
|
||||
void __iomem *iomem;
|
||||
int irq;
|
||||
struct clk *clk;
|
||||
struct i2c_adapter adap;
|
||||
|
||||
/* lock to protect rbuf and wbuf between xfer_rd/wr and irq handler */
|
||||
spinlock_t lock;
|
||||
|
||||
/* beginning of lock scope */
|
||||
unsigned char *rbuf;
|
||||
int rd_total_len;
|
||||
int rd_data_xfered;
|
||||
int rd_cmd_xfered;
|
||||
|
||||
unsigned char *wbuf;
|
||||
int wt_len;
|
||||
|
||||
int is_write;
|
||||
int stop_hold;
|
||||
int speed;
|
||||
|
||||
int data_buf[BUFSIZE];
|
||||
int cmd_buf[BUFSIZE];
|
||||
int cmd;
|
||||
|
||||
/* end of lock scope */
|
||||
struct completion trans_waitq;
|
||||
};
|
||||
|
||||
static inline unsigned short jz4780_i2c_readw(struct jz4780_i2c *i2c,
|
||||
unsigned long offset)
|
||||
{
|
||||
return readw(i2c->iomem + offset);
|
||||
}
|
||||
|
||||
static inline void jz4780_i2c_writew(struct jz4780_i2c *i2c,
|
||||
unsigned long offset, unsigned short val)
|
||||
{
|
||||
writew(val, i2c->iomem + offset);
|
||||
}
|
||||
|
||||
static int jz4780_i2c_disable(struct jz4780_i2c *i2c)
|
||||
{
|
||||
unsigned short regval;
|
||||
unsigned long loops = 5;
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 0);
|
||||
|
||||
do {
|
||||
regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA);
|
||||
if (!(regval & JZ4780_I2C_ENB_I2C))
|
||||
return 0;
|
||||
|
||||
usleep_range(5000, 15000);
|
||||
} while (--loops);
|
||||
|
||||
dev_err(&i2c->adap.dev, "disable failed: ENSTA=0x%04x\n", regval);
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int jz4780_i2c_enable(struct jz4780_i2c *i2c)
|
||||
{
|
||||
unsigned short regval;
|
||||
unsigned long loops = 5;
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 1);
|
||||
|
||||
do {
|
||||
regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA);
|
||||
if (regval & JZ4780_I2C_ENB_I2C)
|
||||
return 0;
|
||||
|
||||
usleep_range(5000, 15000);
|
||||
} while (--loops);
|
||||
|
||||
dev_err(&i2c->adap.dev, "enable failed: ENSTA=0x%04x\n", regval);
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int jz4780_i2c_set_target(struct jz4780_i2c *i2c, unsigned char address)
|
||||
{
|
||||
unsigned short regval;
|
||||
unsigned long loops = 5;
|
||||
|
||||
do {
|
||||
regval = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
|
||||
if ((regval & JZ4780_I2C_STA_TFE) &&
|
||||
!(regval & JZ4780_I2C_STA_MSTACT))
|
||||
break;
|
||||
|
||||
usleep_range(5000, 15000);
|
||||
} while (--loops);
|
||||
|
||||
if (loops) {
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_TAR, address);
|
||||
return 0;
|
||||
}
|
||||
|
||||
dev_err(&i2c->adap.dev,
|
||||
"set device to address 0x%02x failed, STA=0x%04x\n",
|
||||
address, regval);
|
||||
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
static int jz4780_i2c_set_speed(struct jz4780_i2c *i2c)
|
||||
{
|
||||
int dev_clk_khz = clk_get_rate(i2c->clk) / 1000;
|
||||
int cnt_high = 0; /* HIGH period count of the SCL clock */
|
||||
int cnt_low = 0; /* LOW period count of the SCL clock */
|
||||
int cnt_period = 0; /* period count of the SCL clock */
|
||||
int setup_time = 0;
|
||||
int hold_time = 0;
|
||||
unsigned short tmp = 0;
|
||||
int i2c_clk = i2c->speed;
|
||||
|
||||
if (jz4780_i2c_disable(i2c))
|
||||
dev_dbg(&i2c->adap.dev, "i2c not disabled\n");
|
||||
|
||||
/*
|
||||
* 1 JZ4780_I2C cycle equals to cnt_period PCLK(i2c_clk)
|
||||
* standard mode, min LOW and HIGH period are 4700 ns and 4000 ns
|
||||
* fast mode, min LOW and HIGH period are 1300 ns and 600 ns
|
||||
*/
|
||||
cnt_period = dev_clk_khz / i2c_clk;
|
||||
|
||||
if (i2c_clk <= 100)
|
||||
cnt_high = (cnt_period * 4000) / (4700 + 4000);
|
||||
else
|
||||
cnt_high = (cnt_period * 600) / (1300 + 600);
|
||||
|
||||
cnt_low = cnt_period - cnt_high;
|
||||
|
||||
/*
|
||||
* NOTE: JZ4780_I2C_CTRL_REST can't set when i2c enabled, because
|
||||
* normal read are 2 messages, we cannot disable i2c controller
|
||||
* between these two messages, this means that we must always set
|
||||
* JZ4780_I2C_CTRL_REST when init JZ4780_I2C_CTRL
|
||||
*
|
||||
*/
|
||||
if (i2c_clk <= 100) {
|
||||
tmp = JZ4780_I2C_CTRL_SPDS | JZ4780_I2C_CTRL_REST
|
||||
| JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_SHCNT,
|
||||
JZ4780_I2CSHCNT_ADJUST(cnt_high));
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_SLCNT,
|
||||
JZ4780_I2CSLCNT_ADJUST(cnt_low));
|
||||
} else {
|
||||
tmp = JZ4780_I2C_CTRL_SPDF | JZ4780_I2C_CTRL_REST
|
||||
| JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_FHCNT,
|
||||
JZ4780_I2CFHCNT_ADJUST(cnt_high));
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_FLCNT,
|
||||
JZ4780_I2CFLCNT_ADJUST(cnt_low));
|
||||
}
|
||||
|
||||
/*
|
||||
* a i2c device must internally provide a hold time at least 300ns
|
||||
* tHD:DAT
|
||||
* Standard Mode: min=300ns, max=3450ns
|
||||
* Fast Mode: min=0ns, max=900ns
|
||||
* tSU:DAT
|
||||
* Standard Mode: min=250ns, max=infinite
|
||||
* Fast Mode: min=100(250ns is recommended), max=infinite
|
||||
*
|
||||
* 1i2c_clk = 10^6 / dev_clk_khz
|
||||
* on FPGA, dev_clk_khz = 12000, so 1i2c_clk = 1000/12 = 83ns
|
||||
* on Pisces(1008M), dev_clk_khz=126000, so 1i2c_clk = 1000 / 126 = 8ns
|
||||
*
|
||||
* The actual hold time is (SDAHD + 1) * (i2c_clk period).
|
||||
*
|
||||
* Length of setup time calculated using (SDASU - 1) * (ic_clk_period)
|
||||
*
|
||||
*/
|
||||
if (i2c_clk <= 100) { /* standard mode */
|
||||
setup_time = 300;
|
||||
hold_time = 400;
|
||||
} else {
|
||||
setup_time = 450;
|
||||
hold_time = 450;
|
||||
}
|
||||
|
||||
hold_time = ((hold_time * dev_clk_khz) / 1000000) - 1;
|
||||
setup_time = ((setup_time * dev_clk_khz) / 1000000) + 1;
|
||||
|
||||
if (setup_time > 255)
|
||||
setup_time = 255;
|
||||
|
||||
if (setup_time <= 0)
|
||||
setup_time = 1;
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_SDASU, setup_time);
|
||||
|
||||
if (hold_time > 255)
|
||||
hold_time = 255;
|
||||
|
||||
if (hold_time >= 0) {
|
||||
/*i2c hold time enable */
|
||||
hold_time |= JZ4780_I2C_SDAHD_HDENB;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
|
||||
} else {
|
||||
/* disable hold time */
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int jz4780_i2c_cleanup(struct jz4780_i2c *i2c)
|
||||
{
|
||||
int ret;
|
||||
unsigned long flags;
|
||||
unsigned short tmp;
|
||||
|
||||
spin_lock_irqsave(&i2c->lock, flags);
|
||||
|
||||
/* can send stop now if need */
|
||||
tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
|
||||
tmp &= ~JZ4780_I2C_CTRL_STPHLD;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
|
||||
/* disable all interrupts first */
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
|
||||
|
||||
/* then clear all interrupts */
|
||||
jz4780_i2c_readw(i2c, JZ4780_I2C_CTXABRT);
|
||||
jz4780_i2c_readw(i2c, JZ4780_I2C_CINTR);
|
||||
|
||||
/* then disable the controller */
|
||||
tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
|
||||
tmp &= ~JZ4780_I2C_ENB_I2C;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
udelay(10);
|
||||
tmp |= JZ4780_I2C_ENB_I2C;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
|
||||
spin_unlock_irqrestore(&i2c->lock, flags);
|
||||
|
||||
ret = jz4780_i2c_disable(i2c);
|
||||
if (ret)
|
||||
dev_err(&i2c->adap.dev,
|
||||
"unable to disable device during cleanup!\n");
|
||||
|
||||
if (unlikely(jz4780_i2c_readw(i2c, JZ4780_I2C_INTM)
|
||||
& jz4780_i2c_readw(i2c, JZ4780_I2C_INTST)))
|
||||
dev_err(&i2c->adap.dev,
|
||||
"device has interrupts after a complete cleanup!\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int jz4780_i2c_prepare(struct jz4780_i2c *i2c)
|
||||
{
|
||||
jz4780_i2c_set_speed(i2c);
|
||||
return jz4780_i2c_enable(i2c);
|
||||
}
|
||||
|
||||
static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int cmd_count)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < cmd_count; i++)
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
|
||||
}
|
||||
|
||||
static void jz4780_i2c_trans_done(struct jz4780_i2c *i2c)
|
||||
{
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
|
||||
complete(&i2c->trans_waitq);
|
||||
}
|
||||
|
||||
static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id)
|
||||
{
|
||||
unsigned short tmp;
|
||||
unsigned short intst;
|
||||
unsigned short intmsk;
|
||||
struct jz4780_i2c *i2c = dev_id;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&i2c->lock, flags);
|
||||
intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
|
||||
intst = jz4780_i2c_readw(i2c, JZ4780_I2C_INTST);
|
||||
|
||||
intst &= intmsk;
|
||||
|
||||
if (intst & JZ4780_I2C_INTST_TXABT) {
|
||||
jz4780_i2c_trans_done(i2c);
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (intst & JZ4780_I2C_INTST_RXOF) {
|
||||
dev_dbg(&i2c->adap.dev, "received fifo overflow!\n");
|
||||
jz4780_i2c_trans_done(i2c);
|
||||
goto done;
|
||||
}
|
||||
|
||||
/*
|
||||
* When reading, always drain RX FIFO before we send more Read
|
||||
* Commands to avoid fifo overrun
|
||||
*/
|
||||
if (i2c->is_write == 0) {
|
||||
int rd_left;
|
||||
|
||||
while ((jz4780_i2c_readw(i2c, JZ4780_I2C_STA)
|
||||
& JZ4780_I2C_STA_RFNE)) {
|
||||
*(i2c->rbuf++) = jz4780_i2c_readw(i2c, JZ4780_I2C_DC)
|
||||
& 0xff;
|
||||
i2c->rd_data_xfered++;
|
||||
if (i2c->rd_data_xfered == i2c->rd_total_len) {
|
||||
jz4780_i2c_trans_done(i2c);
|
||||
goto done;
|
||||
}
|
||||
}
|
||||
|
||||
rd_left = i2c->rd_total_len - i2c->rd_data_xfered;
|
||||
|
||||
if (rd_left <= JZ4780_I2C_FIFO_LEN)
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1);
|
||||
}
|
||||
|
||||
if (intst & JZ4780_I2C_INTST_TXEMP) {
|
||||
if (i2c->is_write == 0) {
|
||||
int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
|
||||
int max_send = (JZ4780_I2C_FIFO_LEN - 1)
|
||||
- (i2c->rd_cmd_xfered
|
||||
- i2c->rd_data_xfered);
|
||||
int cmd_to_send = min(cmd_left, max_send);
|
||||
|
||||
if (i2c->rd_cmd_xfered != 0)
|
||||
cmd_to_send = min(cmd_to_send,
|
||||
JZ4780_I2C_FIFO_LEN
|
||||
- TX_LEVEL - 1);
|
||||
|
||||
if (cmd_to_send) {
|
||||
jz4780_i2c_send_rcmd(i2c, cmd_to_send);
|
||||
i2c->rd_cmd_xfered += cmd_to_send;
|
||||
}
|
||||
|
||||
cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
|
||||
if (cmd_left == 0) {
|
||||
intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
|
||||
intmsk &= ~JZ4780_I2C_INTM_MTXEMP;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk);
|
||||
|
||||
tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
|
||||
tmp &= ~JZ4780_I2C_CTRL_STPHLD;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
}
|
||||
} else {
|
||||
unsigned short data;
|
||||
unsigned short i2c_sta;
|
||||
|
||||
i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
|
||||
|
||||
while ((i2c_sta & JZ4780_I2C_STA_TFNF) &&
|
||||
(i2c->wt_len > 0)) {
|
||||
i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
|
||||
data = *i2c->wbuf;
|
||||
data &= ~JZ4780_I2C_DC_READ;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
|
||||
data);
|
||||
i2c->wbuf++;
|
||||
i2c->wt_len--;
|
||||
}
|
||||
|
||||
if (i2c->wt_len == 0) {
|
||||
if (!i2c->stop_hold) {
|
||||
tmp = jz4780_i2c_readw(i2c,
|
||||
JZ4780_I2C_CTRL);
|
||||
tmp &= ~JZ4780_I2C_CTRL_STPHLD;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL,
|
||||
tmp);
|
||||
}
|
||||
|
||||
jz4780_i2c_trans_done(i2c);
|
||||
goto done;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
done:
|
||||
spin_unlock_irqrestore(&i2c->lock, flags);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src)
|
||||
{
|
||||
int i;
|
||||
|
||||
dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src);
|
||||
dev_err(&i2c->adap.dev, "device addr=%x\n",
|
||||
jz4780_i2c_readw(i2c, JZ4780_I2C_TAR));
|
||||
dev_err(&i2c->adap.dev, "send cmd count:%d %d\n",
|
||||
i2c->cmd, i2c->cmd_buf[i2c->cmd]);
|
||||
dev_err(&i2c->adap.dev, "receive data count:%d %d\n",
|
||||
i2c->cmd, i2c->data_buf[i2c->cmd]);
|
||||
|
||||
for (i = 0; i < 16; i++) {
|
||||
if (src & BIT(i))
|
||||
dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n",
|
||||
i, jz4780_i2c_abrt_src[i]);
|
||||
}
|
||||
}
|
||||
|
||||
static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
|
||||
unsigned char *buf, int len, int cnt,
|
||||
int idx)
|
||||
{
|
||||
int ret = 0;
|
||||
long timeout;
|
||||
int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
|
||||
unsigned short tmp;
|
||||
unsigned long flags;
|
||||
|
||||
memset(buf, 0, len);
|
||||
|
||||
spin_lock_irqsave(&i2c->lock, flags);
|
||||
|
||||
i2c->stop_hold = 0;
|
||||
i2c->is_write = 0;
|
||||
i2c->rbuf = buf;
|
||||
i2c->rd_total_len = len;
|
||||
i2c->rd_data_xfered = 0;
|
||||
i2c->rd_cmd_xfered = 0;
|
||||
|
||||
if (len <= JZ4780_I2C_FIFO_LEN)
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1);
|
||||
else
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL);
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM,
|
||||
JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP
|
||||
| JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF);
|
||||
|
||||
tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
|
||||
tmp |= JZ4780_I2C_CTRL_STPHLD;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
|
||||
spin_unlock_irqrestore(&i2c->lock, flags);
|
||||
|
||||
timeout = wait_for_completion_timeout(&i2c->trans_waitq,
|
||||
msecs_to_jiffies(wait_time));
|
||||
|
||||
if (!timeout) {
|
||||
dev_err(&i2c->adap.dev, "irq read timeout\n");
|
||||
dev_dbg(&i2c->adap.dev, "send cmd count:%d %d\n",
|
||||
i2c->cmd, i2c->cmd_buf[i2c->cmd]);
|
||||
dev_dbg(&i2c->adap.dev, "receive data count:%d %d\n",
|
||||
i2c->cmd, i2c->data_buf[i2c->cmd]);
|
||||
ret = -EIO;
|
||||
}
|
||||
|
||||
tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT);
|
||||
if (tmp) {
|
||||
jz4780_i2c_txabrt(i2c, tmp);
|
||||
ret = -EIO;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c,
|
||||
unsigned char *buf, int len,
|
||||
int cnt, int idx)
|
||||
{
|
||||
int ret = 0;
|
||||
int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
|
||||
long timeout;
|
||||
unsigned short tmp;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&i2c->lock, flags);
|
||||
|
||||
if (idx < (cnt - 1))
|
||||
i2c->stop_hold = 1;
|
||||
else
|
||||
i2c->stop_hold = 0;
|
||||
|
||||
i2c->is_write = 1;
|
||||
i2c->wbuf = buf;
|
||||
i2c->wt_len = len;
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP
|
||||
| JZ4780_I2C_INTM_MTXABT);
|
||||
|
||||
tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
|
||||
tmp |= JZ4780_I2C_CTRL_STPHLD;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
|
||||
spin_unlock_irqrestore(&i2c->lock, flags);
|
||||
|
||||
timeout = wait_for_completion_timeout(&i2c->trans_waitq,
|
||||
msecs_to_jiffies(wait_time));
|
||||
if (timeout && !i2c->stop_hold) {
|
||||
unsigned short i2c_sta;
|
||||
int write_in_process;
|
||||
|
||||
timeout = JZ4780_I2C_TIMEOUT * 100;
|
||||
for (; timeout > 0; timeout--) {
|
||||
i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
|
||||
|
||||
write_in_process = (i2c_sta & JZ4780_I2C_STA_MSTACT) ||
|
||||
!(i2c_sta & JZ4780_I2C_STA_TFE);
|
||||
if (!write_in_process)
|
||||
break;
|
||||
udelay(10);
|
||||
}
|
||||
}
|
||||
|
||||
if (!timeout) {
|
||||
dev_err(&i2c->adap.dev, "write wait timeout\n");
|
||||
ret = -EIO;
|
||||
}
|
||||
|
||||
tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT);
|
||||
if (tmp) {
|
||||
jz4780_i2c_txabrt(i2c, tmp);
|
||||
ret = -EIO;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int jz4780_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
|
||||
int count)
|
||||
{
|
||||
int i = -EIO;
|
||||
int ret = 0;
|
||||
struct jz4780_i2c *i2c = adap->algo_data;
|
||||
|
||||
ret = jz4780_i2c_prepare(i2c);
|
||||
if (ret) {
|
||||
dev_err(&i2c->adap.dev, "I2C prepare failed\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (msg->addr != jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)) {
|
||||
ret = jz4780_i2c_set_target(i2c, msg->addr);
|
||||
if (ret)
|
||||
goto out;
|
||||
}
|
||||
for (i = 0; i < count; i++, msg++) {
|
||||
if (msg->flags & I2C_M_RD)
|
||||
ret = jz4780_i2c_xfer_read(i2c, msg->buf, msg->len,
|
||||
count, i);
|
||||
else
|
||||
ret = jz4780_i2c_xfer_write(i2c, msg->buf, msg->len,
|
||||
count, i);
|
||||
|
||||
if (ret)
|
||||
goto out;
|
||||
}
|
||||
|
||||
ret = i;
|
||||
|
||||
out:
|
||||
jz4780_i2c_cleanup(i2c);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static u32 jz4780_i2c_functionality(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm jz4780_i2c_algorithm = {
|
||||
.master_xfer = jz4780_i2c_xfer,
|
||||
.functionality = jz4780_i2c_functionality,
|
||||
};
|
||||
|
||||
static const struct of_device_id jz4780_i2c_of_matches[] = {
|
||||
{ .compatible = "ingenic,jz4780-i2c", },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
|
||||
static int jz4780_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret = 0;
|
||||
unsigned int clk_freq = 0;
|
||||
unsigned short tmp;
|
||||
struct resource *r;
|
||||
struct jz4780_i2c *i2c;
|
||||
|
||||
i2c = devm_kzalloc(&pdev->dev, sizeof(struct jz4780_i2c), GFP_KERNEL);
|
||||
if (!i2c)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c->adap.owner = THIS_MODULE;
|
||||
i2c->adap.algo = &jz4780_i2c_algorithm;
|
||||
i2c->adap.algo_data = i2c;
|
||||
i2c->adap.retries = 5;
|
||||
i2c->adap.dev.parent = &pdev->dev;
|
||||
i2c->adap.dev.of_node = pdev->dev.of_node;
|
||||
sprintf(i2c->adap.name, "%s", pdev->name);
|
||||
|
||||
init_completion(&i2c->trans_waitq);
|
||||
spin_lock_init(&i2c->lock);
|
||||
|
||||
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
i2c->iomem = devm_ioremap_resource(&pdev->dev, r);
|
||||
if (IS_ERR(i2c->iomem))
|
||||
return PTR_ERR(i2c->iomem);
|
||||
|
||||
platform_set_drvdata(pdev, i2c);
|
||||
|
||||
i2c->clk = devm_clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(i2c->clk))
|
||||
return PTR_ERR(i2c->clk);
|
||||
|
||||
clk_prepare_enable(i2c->clk);
|
||||
|
||||
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
||||
&clk_freq)) {
|
||||
dev_err(&pdev->dev, "clock-frequency not specified in DT");
|
||||
return clk_freq;
|
||||
}
|
||||
|
||||
i2c->speed = clk_freq / 1000;
|
||||
jz4780_i2c_set_speed(i2c);
|
||||
|
||||
dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed);
|
||||
|
||||
tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
|
||||
tmp &= ~JZ4780_I2C_CTRL_STPHLD;
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
|
||||
|
||||
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
|
||||
|
||||
i2c->cmd = 0;
|
||||
memset(i2c->cmd_buf, 0, BUFSIZE);
|
||||
memset(i2c->data_buf, 0, BUFSIZE);
|
||||
|
||||
i2c->irq = platform_get_irq(pdev, 0);
|
||||
ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
|
||||
dev_name(&pdev->dev), i2c);
|
||||
if (ret) {
|
||||
ret = -ENODEV;
|
||||
goto err;
|
||||
}
|
||||
|
||||
ret = i2c_add_adapter(&i2c->adap);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "Failed to add bus\n");
|
||||
goto err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
clk_disable_unprepare(i2c->clk);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int jz4780_i2c_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct jz4780_i2c *i2c = platform_get_drvdata(pdev);
|
||||
|
||||
clk_disable_unprepare(i2c->clk);
|
||||
i2c_del_adapter(&i2c->adap);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver jz4780_i2c_driver = {
|
||||
.probe = jz4780_i2c_probe,
|
||||
.remove = jz4780_i2c_remove,
|
||||
.driver = {
|
||||
.name = "jz4780-i2c",
|
||||
.of_match_table = of_match_ptr(jz4780_i2c_of_matches),
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(jz4780_i2c_driver);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("ztyan<ztyan@ingenic.cn>");
|
||||
MODULE_DESCRIPTION("i2c driver for JZ4780 SoCs");
|
||||
Загрузка…
Ссылка в новой задаче