microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge remote-tracking branch 'pinctrl/samsung' into next/pinctrl-samsung

This commit is contained in:
Kukjin Kim 2012-11-19 10:00:41 +09:00
Родитель 3d70f8c617 b33ef91f4b
Коммит bab797f8e3
7 изменённых файлов: 739 добавлений и 663 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

118
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
Просмотреть файл

@ -13,8 +13,14 @@ Required Properties:
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
- Pin banks as child nodes: Pin banks of the controller are represented by child
nodes of the controller node. Bank name is taken from name of the node. Each
bank node must contain following properties:
- gpio-controller: identifies the node as a gpio controller and pin bank.
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See generic
GPIO binding documentation for description of particular cells.
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
@ -72,16 +78,24 @@ used as system wakeup events.
A. External GPIO Interrupts: For supporting external gpio interrupts, the
following properties should be specified in the pin-controller device node.
- interrupt-controller: identifies the controller node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2.
- First Cell: represents the external gpio interrupt number local to the
external gpio interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
- interrupt-parent: phandle of the interrupt parent to which the external
GPIO interrupts are forwarded to.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
In addition, following properties must be present in node of every bank
of pins supporting GPIO interrupts:
- interrupt-controller: identifies the controller node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2.
- First Cell: represents the external gpio interrupt number local to the
external gpio interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
child node representing the external wakeup interrupt controller should be
@ -94,6 +108,11 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
found on Samsung Exynos4210 SoC.
- interrupt-parent: phandle of the interrupt parent to which the external
wakeup interrupts are forwarded to.
- interrupts: interrupt used by multiplexed wakeup interrupts.
In addition, following properties must be present in node of every bank
of pins supporting wake-up interrupts:
- interrupt-controller: identifies the node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2
- First Cell: represents the external wakeup interrupt number local to
@ -105,11 +124,63 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
- 4 = high level triggered
- 8 = low level triggered
Node of every bank of pins supporting direct wake-up interrupts (without
multiplexing) must contain following properties:
- interrupt-parent: phandle of the interrupt parent to which the external
wakeup interrupts are forwarded to.
- interrupts: interrupts of the interrupt parent which are used for external
wakeup interrupts from pins of the bank, must contain interrupts for all
pins of the bank.
Aliases:
All the pin controller nodes should be represented in the aliases node using
the following format 'pinctrl{n}' where n is a unique number for the alias.
Example: A pin-controller node with pin banks:
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
/* ... */
/* Pin bank without external interrupts */
gpy0: gpy0 {
gpio-controller;
#gpio-cells = <2>;
};
/* ... */
/* Pin bank with external GPIO or muxed wake-up interrupts */
gpj0: gpj0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
/* ... */
/* Pin bank with external direct wake-up interrupts */
gpx0: gpx0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
#interrupt-cells = <2>;
};
/* ... */
};
Example 1: A pin-controller node with pin groups.
pinctrl_0: pinctrl@11400000 {
@ -117,6 +188,8 @@ Example 1: A pin-controller node with pin groups.
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
/* ... */
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <2>;
@ -158,20 +231,14 @@ Example 2: A pin-controller node with external wakeup interrupt controller node.
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 46 0>
wakup_eint: wakeup-interrupt-controller {
/* ... */
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
interrupts = <0 32 0>;
};
};
@ -190,7 +257,8 @@ Example 4: Set up the default pin state for uart controller.
static int s3c24xx_serial_probe(struct platform_device *pdev) {
struct pinctrl *pinctrl;
...
...
/* ... */
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}

278
arch/arm/boot/dts/exynos4210-pinctrl.dtsi
Просмотреть файл

@ -16,6 +16,134 @@
/ {
pinctrl@11400000 {
gpa0: gpa0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb: gpb {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe0: gpe0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe1: gpe1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe2: gpe2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe3: gpe3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpe4: gpe4 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf0: gpf0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf1: gpf1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf2: gpf2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf3: gpf3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <0x2>;
@ -205,6 +333,151 @@
};
pinctrl@11000000 {
gpj0: gpj0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpj1: gpj1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk0: gpk0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk1: gpk1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk2: gpk2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpk3: gpk3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpl0: gpl0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpl1: gpl1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpl2: gpl2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpy0: gpy0 {
gpio-controller;
#gpio-cells = <2>;
};
gpy1: gpy1 {
gpio-controller;
#gpio-cells = <2>;
};
gpy2: gpy2 {
gpio-controller;
#gpio-cells = <2>;
};
gpy3: gpy3 {
gpio-controller;
#gpio-cells = <2>;
};
gpy4: gpy4 {
gpio-controller;
#gpio-cells = <2>;
};
gpy5: gpy5 {
gpio-controller;
#gpio-cells = <2>;
};
gpy6: gpy6 {
gpio-controller;
#gpio-cells = <2>;
};
gpx0: gpx0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
#interrupt-cells = <2>;
};
gpx1: gpx1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
#interrupt-cells = <2>;
};
gpx2: gpx2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
@ -438,6 +711,11 @@
};
pinctrl@03860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";

241
arch/arm/boot/dts/exynos4210.dtsi
Просмотреть файл

@ -46,27 +46,17 @@
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
interrupts = <0 32 0>;
};
};
@ -74,233 +64,4 @@
compatible = "samsung,pinctrl-exynos4210";
reg = <0x03860000 0x1000>;
};
gpio-controllers {
#address-cells = <1>;
#size-cells = <1>;
gpio-controller;
ranges;
gpa0: gpio-controller@11400000 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400000 0x20>;
#gpio-cells = <4>;
};
gpa1: gpio-controller@11400020 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400020 0x20>;
#gpio-cells = <4>;
};
gpb: gpio-controller@11400040 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400040 0x20>;
#gpio-cells = <4>;
};
gpc0: gpio-controller@11400060 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400060 0x20>;
#gpio-cells = <4>;
};
gpc1: gpio-controller@11400080 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400080 0x20>;
#gpio-cells = <4>;
};
gpd0: gpio-controller@114000A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000A0 0x20>;
#gpio-cells = <4>;
};
gpd1: gpio-controller@114000C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000C0 0x20>;
#gpio-cells = <4>;
};
gpe0: gpio-controller@114000E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000E0 0x20>;
#gpio-cells = <4>;
};
gpe1: gpio-controller@11400100 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400100 0x20>;
#gpio-cells = <4>;
};
gpe2: gpio-controller@11400120 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400120 0x20>;
#gpio-cells = <4>;
};
gpe3: gpio-controller@11400140 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400140 0x20>;
#gpio-cells = <4>;
};
gpe4: gpio-controller@11400160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400160 0x20>;
#gpio-cells = <4>;
};
gpf0: gpio-controller@11400180 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400180 0x20>;
#gpio-cells = <4>;
};
gpf1: gpio-controller@114001A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001A0 0x20>;
#gpio-cells = <4>;
};
gpf2: gpio-controller@114001C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001C0 0x20>;
#gpio-cells = <4>;
};
gpf3: gpio-controller@114001E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001E0 0x20>;
#gpio-cells = <4>;
};
gpj0: gpio-controller@11000000 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000000 0x20>;
#gpio-cells = <4>;
};
gpj1: gpio-controller@11000020 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000020 0x20>;
#gpio-cells = <4>;
};
gpk0: gpio-controller@11000040 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000040 0x20>;
#gpio-cells = <4>;
};
gpk1: gpio-controller@11000060 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000060 0x20>;
#gpio-cells = <4>;
};
gpk2: gpio-controller@11000080 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000080 0x20>;
#gpio-cells = <4>;
};
gpk3: gpio-controller@110000A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000A0 0x20>;
#gpio-cells = <4>;
};
gpl0: gpio-controller@110000C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000C0 0x20>;
#gpio-cells = <4>;
};
gpl1: gpio-controller@110000E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000E0 0x20>;
#gpio-cells = <4>;
};
gpl2: gpio-controller@11000100 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000100 0x20>;
#gpio-cells = <4>;
};
gpy0: gpio-controller@11000120 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000120 0x20>;
#gpio-cells = <4>;
};
gpy1: gpio-controller@11000140 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000140 0x20>;
#gpio-cells = <4>;
};
gpy2: gpio-controller@11000160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000160 0x20>;
#gpio-cells = <4>;
};
gpy3: gpio-controller@11000180 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000180 0x20>;
#gpio-cells = <4>;
};
gpy4: gpio-controller@110001A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001A0 0x20>;
#gpio-cells = <4>;
};
gpy5: gpio-controller@110001C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001C0 0x20>;
#gpio-cells = <4>;
};
gpy6: gpio-controller@110001E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001E0 0x20>;
#gpio-cells = <4>;
};
gpx0: gpio-controller@11000C00 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C00 0x20>;
#gpio-cells = <4>;
};
gpx1: gpio-controller@11000C20 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C20 0x20>;
#gpio-cells = <4>;
};
gpx2: gpio-controller@11000C40 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C40 0x20>;
#gpio-cells = <4>;
};
gpx3: gpio-controller@11000C60 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C60 0x20>;
#gpio-cells = <4>;
};
gpz: gpio-controller@03860000 {
compatible = "samsung,exynos4-gpio";
reg = <0x03860000 0x20>;
#gpio-cells = <4>;
};
};
};

367
drivers/pinctrl/pinctrl-exynos.c
Просмотреть файл

@ -40,46 +40,46 @@ static const struct of_device_id exynos_wkup_irq_ids[] = {
static void exynos_gpio_irq_unmask(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask &= ~(1 << edata->pin);
mask &= ~(1 << irqd->hwirq);
writel(mask, d->virt_base + reg_mask);
}
static void exynos_gpio_irq_mask(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask |= 1 << edata->pin;
mask |= 1 << irqd->hwirq;
writel(mask, d->virt_base + reg_mask);
}
static void exynos_gpio_irq_ack(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset;
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset;
writel(1 << edata->pin, d->virt_base + reg_pend);
writel(1 << irqd->hwirq, d->virt_base + reg_pend);
}
static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
struct samsung_pin_ctrl *ctrl = d->ctrl;
struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
struct samsung_pin_bank *bank = edata->bank;
unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin;
unsigned int pin = irqd->hwirq;
unsigned int shift = EXYNOS_EINT_CON_LEN * pin;
unsigned int con, trig_type;
unsigned long reg_con = ctrl->geint_con + edata->eint_offset;
unsigned long reg_con = ctrl->geint_con + bank->eint_offset;
unsigned int mask;
switch (type) {
@ -114,7 +114,7 @@ static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
writel(con, d->virt_base + reg_con);
reg_con = bank->pctl_offset;
shift = edata->pin * bank->func_width;
shift = pin * bank->func_width;
mask = (1 << bank->func_width) - 1;
con = readl(d->virt_base + reg_con);
@ -136,82 +136,23 @@ static struct irq_chip exynos_gpio_irq_chip = {
.irq_set_type = exynos_gpio_irq_set_type,
};
/*
* given a controller-local external gpio interrupt number, prepare the handler
* data for it.
*/
static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
struct samsung_pinctrl_drv_data *d)
{
struct samsung_pin_bank *bank = d->ctrl->pin_banks;
struct exynos_geint_data *eint_data;
unsigned int nr_banks = d->ctrl->nr_banks, idx;
unsigned int irq_base = 0, eint_offset = 0;
if (hw >= d->ctrl->nr_gint) {
dev_err(d->dev, "unsupported ext-gpio interrupt\n");
return NULL;
}
for (idx = 0; idx < nr_banks; idx++, bank++) {
if (bank->eint_type != EINT_TYPE_GPIO)
continue;
if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins)))
break;
irq_base += bank->nr_pins;
eint_offset += 4;
}
if (idx == nr_banks) {
dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n");
return NULL;
}
eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL);
if (!eint_data) {
dev_err(d->dev, "no memory for eint-gpio data\n");
return NULL;
}
eint_data->bank = bank;
eint_data->pin = hw - irq_base;
eint_data->eint_offset = eint_offset;
return eint_data;
}
static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct samsung_pinctrl_drv_data *d = h->host_data;
struct exynos_geint_data *eint_data;
struct samsung_pin_bank *b = h->host_data;
eint_data = exynos_get_eint_data(hw, d);
if (!eint_data)
return -EINVAL;
irq_set_handler_data(virq, eint_data);
irq_set_chip_data(virq, h->host_data);
irq_set_chip_data(virq, b);
irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip,
handle_level_irq);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq)
{
struct samsung_pinctrl_drv_data *d = h->host_data;
struct exynos_geint_data *eint_data;
eint_data = irq_get_handler_data(virq);
devm_kfree(d->dev, eint_data);
}
/*
* irq domain callbacks for external gpio interrupt controller.
*/
static const struct irq_domain_ops exynos_gpio_irqd_ops = {
.map = exynos_gpio_irq_map,
.unmap = exynos_gpio_irq_unmap,
.xlate = irq_domain_xlate_twocell,
};
@ -230,7 +171,7 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
return IRQ_HANDLED;
bank += (group - 1);
virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin);
virq = irq_linear_revmap(bank->irq_domain, pin);
if (!virq)
return IRQ_NONE;
generic_handle_irq(virq);
@ -243,8 +184,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
*/
static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
{
struct samsung_pin_bank *bank;
struct device *dev = d->dev;
unsigned int ret;
unsigned int i;
if (!d->irq) {
dev_err(dev, "irq number not available\n");
@ -258,11 +201,16 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
return -ENXIO;
}
d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint,
&exynos_gpio_irqd_ops, d);
if (!d->gpio_irqd) {
dev_err(dev, "gpio irq domain allocation failed\n");
return -ENXIO;
bank = d->ctrl->pin_banks;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_GPIO)
continue;
bank->irq_domain = irq_domain_add_linear(bank->of_node,
bank->nr_pins, &exynos_gpio_irqd_ops, bank);
if (!bank->irq_domain) {
dev_err(dev, "gpio irq domain add failed\n");
return -ENXIO;
}
}
return 0;
@ -270,48 +218,46 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
static void exynos_wkup_irq_unmask(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask &= ~(1 << pin);
mask &= ~(1 << irqd->hwirq);
writel(mask, d->virt_base + reg_mask);
}
static void exynos_wkup_irq_mask(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset;
unsigned long mask;
mask = readl(d->virt_base + reg_mask);
mask |= 1 << pin;
mask |= 1 << irqd->hwirq;
writel(mask, d->virt_base + reg_mask);
}
static void exynos_wkup_irq_ack(struct irq_data *irqd)
{
struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
unsigned long pend = d->ctrl->weint_pend + (bank << 2);
struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = b->drvdata;
unsigned long pend = d->ctrl->weint_pend + b->eint_offset;
writel(1 << pin, d->virt_base + pend);
writel(1 << irqd->hwirq, d->virt_base + pend);
}
static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
{
struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
unsigned long reg_con = d->ctrl->weint_con + (bank << 2);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
struct samsung_pinctrl_drv_data *d = bank->drvdata;
unsigned int pin = irqd->hwirq;
unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset;
unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
unsigned long con, trig_type;
unsigned int mask;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
@ -343,6 +289,16 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
reg_con = bank->pctl_offset;
shift = pin * bank->func_width;
mask = (1 << bank->func_width) - 1;
con = readl(d->virt_base + reg_con);
con &= ~(mask << shift);
con |= EXYNOS_EINT_FUNC << shift;
writel(con, d->virt_base + reg_con);
return 0;
}
@ -361,6 +317,7 @@ static struct irq_chip exynos_wkup_irq_chip = {
static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
{
struct exynos_weint_data *eintd = irq_get_handler_data(irq);
struct samsung_pin_bank *bank = eintd->bank;
struct irq_chip *chip = irq_get_chip(irq);
int eint_irq;
@ -370,20 +327,20 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
eint_irq = irq_linear_revmap(eintd->domain, eintd->irq);
eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq);
generic_handle_irq(eint_irq);
chip->irq_unmask(&desc->irq_data);
chained_irq_exit(chip, desc);
}
static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend,
struct irq_domain *domain)
static inline void exynos_irq_demux_eint(unsigned long pend,
struct irq_domain *domain)
{
unsigned int irq;
while (pend) {
irq = fls(pend) - 1;
generic_handle_irq(irq_find_mapping(domain, irq_base + irq));
generic_handle_irq(irq_find_mapping(domain, irq));
pend &= ~(1 << irq);
}
}
@ -392,18 +349,22 @@ static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend,
static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
struct exynos_weint_data *eintd = irq_get_handler_data(irq);
struct samsung_pinctrl_drv_data *d = eintd->domain->host_data;
struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq);
struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata;
struct samsung_pin_ctrl *ctrl = d->ctrl;
unsigned long pend;
unsigned long mask;
int i;
chained_irq_enter(chip, desc);
pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8);
mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8);
exynos_irq_demux_eint(16, pend & ~mask, eintd->domain);
pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC);
mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC);
exynos_irq_demux_eint(24, pend & ~mask, eintd->domain);
for (i = 0; i < eintd->nr_banks; ++i) {
struct samsung_pin_bank *b = eintd->banks[i];
pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset);
mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset);
exynos_irq_demux_eint(pend & ~mask, b->irq_domain);
}
chained_irq_exit(chip, desc);
}
@ -433,7 +394,11 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
struct device *dev = d->dev;
struct device_node *wkup_np = NULL;
struct device_node *np;
struct samsung_pin_bank *bank;
struct exynos_weint_data *weint_data;
struct exynos_muxed_weint_data *muxed_data;
unsigned int muxed_banks = 0;
unsigned int i;
int idx, irq;
for_each_child_of_node(dev->of_node, np) {
@ -445,90 +410,124 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
if (!wkup_np)
return -ENODEV;
d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint,
&exynos_wkup_irqd_ops, d);
if (!d->wkup_irqd) {
dev_err(dev, "wakeup irq domain allocation failed\n");
return -ENXIO;
bank = d->ctrl->pin_banks;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_WKUP)
continue;
bank->irq_domain = irq_domain_add_linear(bank->of_node,
bank->nr_pins, &exynos_wkup_irqd_ops, bank);
if (!bank->irq_domain) {
dev_err(dev, "wkup irq domain add failed\n");
return -ENXIO;
}
if (!of_find_property(bank->of_node, "interrupts", NULL)) {
bank->eint_type = EINT_TYPE_WKUP_MUX;
++muxed_banks;
continue;
}
weint_data = devm_kzalloc(dev, bank->nr_pins
* sizeof(*weint_data), GFP_KERNEL);
if (!weint_data) {
dev_err(dev, "could not allocate memory for weint_data\n");
return -ENOMEM;
}
for (idx = 0; idx < bank->nr_pins; ++idx) {
irq = irq_of_parse_and_map(bank->of_node, idx);
if (!irq) {
dev_err(dev, "irq number for eint-%s-%d not found\n",
bank->name, idx);
continue;
}
weint_data[idx].irq = idx;
weint_data[idx].bank = bank;
irq_set_handler_data(irq, &weint_data[idx]);
irq_set_chained_handler(irq, exynos_irq_eint0_15);
}
}
weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL);
if (!weint_data) {
dev_err(dev, "could not allocate memory for weint_data\n");
if (!muxed_banks)
return 0;
irq = irq_of_parse_and_map(wkup_np, 0);
if (!irq) {
dev_err(dev, "irq number for muxed EINTs not found\n");
return 0;
}
muxed_data = devm_kzalloc(dev, sizeof(*muxed_data)
+ muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL);
if (!muxed_data) {
dev_err(dev, "could not allocate memory for muxed_data\n");
return -ENOMEM;
}
irq = irq_of_parse_and_map(wkup_np, 16);
if (irq) {
weint_data[16].domain = d->wkup_irqd;
irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
irq_set_handler_data(irq, &weint_data[16]);
} else {
dev_err(dev, "irq number for EINT16-32 not found\n");
}
irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
irq_set_handler_data(irq, muxed_data);
for (idx = 0; idx < 16; idx++) {
weint_data[idx].domain = d->wkup_irqd;
weint_data[idx].irq = idx;
bank = d->ctrl->pin_banks;
idx = 0;
for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) {
if (bank->eint_type != EINT_TYPE_WKUP_MUX)
continue;
irq = irq_of_parse_and_map(wkup_np, idx);
if (irq) {
irq_set_handler_data(irq, &weint_data[idx]);
irq_set_chained_handler(irq, exynos_irq_eint0_15);
} else {
dev_err(dev, "irq number for eint-%x not found\n", idx);
}
muxed_data->banks[idx++] = bank;
}
muxed_data->nr_banks = muxed_banks;
return 0;
}
/* pin banks of exynos4210 pin-controller 0 */
static struct samsung_pin_bank exynos4210_pin_banks0[] = {
EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"),
EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"),
EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"),
EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"),
EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"),
EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"),
EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"),
EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"),
EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"),
EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"),
EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"),
EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"),
EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"),
EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"),
EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"),
EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"),
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20),
EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24),
EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28),
EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
};
/* pin banks of exynos4210 pin-controller 1 */
static struct samsung_pin_bank exynos4210_pin_banks1[] = {
EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"),
EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"),
EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"),
EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"),
EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"),
EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"),
EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"),
EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"),
EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"),
EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"),
EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"),
EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"),
EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"),
EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"),
EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"),
EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"),
EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"),
EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"),
EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"),
EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"),
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00),
EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04),
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18),
EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos4210 pin-controller 2 */
static struct samsung_pin_bank exynos4210_pin_banks2[] = {
EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"),
EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"),
};
/*
@ -540,9 +539,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
/* pin-controller instance 0 data */
.pin_banks = exynos4210_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
.base = EXYNOS4210_GPIO_A0_START,
.nr_pins = EXYNOS4210_GPIOA_NR_PINS,
.nr_gint = EXYNOS4210_GPIOA_NR_GINT,
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
@ -553,10 +549,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
/* pin-controller instance 1 data */
.pin_banks = exynos4210_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
.base = EXYNOS4210_GPIOA_NR_PINS,
.nr_pins = EXYNOS4210_GPIOB_NR_PINS,
.nr_gint = EXYNOS4210_GPIOB_NR_GINT,
.nr_wint = 32,
.geint_con = EXYNOS_GPIO_ECON_OFFSET,
.geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
.geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
@ -571,9 +563,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
/* pin-controller instance 2 data */
.pin_banks = exynos4210_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
.base = EXYNOS4210_GPIOA_NR_PINS +
EXYNOS4210_GPIOB_NR_PINS,
.nr_pins = EXYNOS4210_GPIOC_NR_PINS,
.label = "exynos4210-gpio-ctrl2",
},
};

170
drivers/pinctrl/pinctrl-exynos.h
Просмотреть файл

@ -17,125 +17,6 @@
* (at your option) any later version.
*/
#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR))
#define EXYNOS4210_GPIO_A0_NR (8)
#define EXYNOS4210_GPIO_A1_NR (6)
#define EXYNOS4210_GPIO_B_NR (8)
#define EXYNOS4210_GPIO_C0_NR (5)
#define EXYNOS4210_GPIO_C1_NR (5)
#define EXYNOS4210_GPIO_D0_NR (4)
#define EXYNOS4210_GPIO_D1_NR (4)
#define EXYNOS4210_GPIO_E0_NR (5)
#define EXYNOS4210_GPIO_E1_NR (8)
#define EXYNOS4210_GPIO_E2_NR (6)
#define EXYNOS4210_GPIO_E3_NR (8)
#define EXYNOS4210_GPIO_E4_NR (8)
#define EXYNOS4210_GPIO_F0_NR (8)
#define EXYNOS4210_GPIO_F1_NR (8)
#define EXYNOS4210_GPIO_F2_NR (8)
#define EXYNOS4210_GPIO_F3_NR (6)
#define EXYNOS4210_GPIO_J0_NR (8)
#define EXYNOS4210_GPIO_J1_NR (5)
#define EXYNOS4210_GPIO_K0_NR (7)
#define EXYNOS4210_GPIO_K1_NR (7)
#define EXYNOS4210_GPIO_K2_NR (7)
#define EXYNOS4210_GPIO_K3_NR (7)
#define EXYNOS4210_GPIO_L0_NR (8)
#define EXYNOS4210_GPIO_L1_NR (3)
#define EXYNOS4210_GPIO_L2_NR (8)
#define EXYNOS4210_GPIO_Y0_NR (6)
#define EXYNOS4210_GPIO_Y1_NR (4)
#define EXYNOS4210_GPIO_Y2_NR (6)
#define EXYNOS4210_GPIO_Y3_NR (8)
#define EXYNOS4210_GPIO_Y4_NR (8)
#define EXYNOS4210_GPIO_Y5_NR (8)
#define EXYNOS4210_GPIO_Y6_NR (8)
#define EXYNOS4210_GPIO_X0_NR (8)
#define EXYNOS4210_GPIO_X1_NR (8)
#define EXYNOS4210_GPIO_X2_NR (8)
#define EXYNOS4210_GPIO_X3_NR (8)
#define EXYNOS4210_GPIO_Z_NR (7)
enum exynos4210_gpio_xa_start {
EXYNOS4210_GPIO_A0_START = 0,
EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0),
EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1),
EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B),
EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0),
EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1),
EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0),
EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1),
EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0),
EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1),
EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2),
EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3),
EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4),
EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0),
EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1),
EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2),
};
enum exynos4210_gpio_xb_start {
EXYNOS4210_GPIO_J0_START = 0,
EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0),
EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1),
EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0),
EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1),
EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2),
EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3),
EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0),
EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1),
EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2),
EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0),
EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1),
EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2),
EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3),
EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4),
EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5),
EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6),
EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0),
EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1),
EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2),
};
enum exynos4210_gpio_xc_start {
EXYNOS4210_GPIO_Z_START = 0,
};
#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START
#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START
#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START
#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START
#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START
#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START
#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START
#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START
#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START
#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START
#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START
#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START
#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START
#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START
#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START
#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START
#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START
#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START
#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START
#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START
#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START
#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START
#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START
#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START
#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START
#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START
#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3)
#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2)
#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z)
/* External GPIO and wakeup interrupt related definitions */
#define EXYNOS_GPIO_ECON_OFFSET 0x700
#define EXYNOS_GPIO_EMASK_OFFSET 0x900
@ -165,11 +46,10 @@ enum exynos4210_gpio_xc_start {
#define EXYNOS_EINT_MAX_PER_BANK 8
#define EXYNOS_EINT_NR_WKUP_EINT
#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \
#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \
{ \
.pctl_offset = reg, \
.pin_base = (__gpio##_START), \
.nr_pins = (__gpio##_NR), \
.nr_pins = pins, \
.func_width = 4, \
.pud_width = 2, \
.drv_width = 2, \
@ -179,40 +59,50 @@ enum exynos4210_gpio_xc_start {
.name = id \
}
#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \
#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \
{ \
.pctl_offset = reg, \
.pin_base = (__gpio##_START), \
.nr_pins = (__gpio##_NR), \
.nr_pins = pins, \
.func_width = 4, \
.pud_width = 2, \
.drv_width = 2, \
.conpdn_width = 2, \
.pudpdn_width = 2, \
.eint_type = EINT_TYPE_GPIO, \
.irq_base = (__gpio##_IRQ), \
.eint_offset = offs, \
.name = id \
}
#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \
{ \
.pctl_offset = reg, \
.nr_pins = pins, \
.func_width = 4, \
.pud_width = 2, \
.drv_width = 2, \
.eint_type = EINT_TYPE_WKUP, \
.eint_offset = offs, \
.name = id \
}
/**
* struct exynos_geint_data: gpio eint specific data for irq_chip callbacks.
* @bank: pin bank from which this gpio interrupt originates.
* @pin: pin number within the bank.
* @eint_offset: offset to be added to the con/pend/mask register bank base.
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
* @irq: interrupt number within the domain.
* @bank: bank responsible for this interrupt
*/
struct exynos_geint_data {
struct samsung_pin_bank *bank;
u32 pin;
u32 eint_offset;
struct exynos_weint_data {
unsigned int irq;
struct samsung_pin_bank *bank;
};
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts
* generated by the external wakeup interrupt controller.
* @domain: irq domain representing the external wakeup interrupts
* @irq: interrupt number within the domain.
* @nr_banks: count of banks being part of the mux
* @banks: array of banks being part of the mux
*/
struct exynos_weint_data {
struct irq_domain *domain;
u32 irq;
struct exynos_muxed_weint_data {
unsigned int nr_banks;
struct samsung_pin_bank *banks[];
};

199
drivers/pinctrl/pinctrl-samsung.c
Просмотреть файл

@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/irqdomain.h>
#include "core.h"
#include "pinctrl-samsung.h"
@ -46,6 +47,13 @@ struct pin_config {
{ "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
};
static unsigned int pin_base = 0;
static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc)
{
return container_of(gc, struct samsung_pin_bank, gpio_chip);
}
/* check if the selector is a valid pin group selector */
static int samsung_get_group_count(struct pinctrl_dev *pctldev)
{
@ -250,14 +258,12 @@ static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev,
* given a pin number that is local to a pin controller, find out the pin bank
* and the register base of the pin bank.
*/
static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin,
void __iomem **reg, u32 *offset,
static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata,
unsigned pin, void __iomem **reg, u32 *offset,
struct samsung_pin_bank **bank)
{
struct samsung_pinctrl_drv_data *drvdata;
struct samsung_pin_bank *b;
drvdata = dev_get_drvdata(gc->dev);
b = drvdata->ctrl->pin_banks;
while ((pin >= b->pin_base) &&
@ -292,7 +298,7 @@ static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
* pin function number in the config register.
*/
for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) {
pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base,
pin_to_reg_bank(drvdata, pins[cnt] - drvdata->ctrl->base,
&reg, &pin_offset, &bank);
mask = (1 << bank->func_width) - 1;
shift = pin_offset * bank->func_width;
@ -329,10 +335,16 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned offset, bool input)
{
struct samsung_pin_bank *bank;
struct samsung_pinctrl_drv_data *drvdata;
void __iomem *reg;
u32 data, pin_offset, mask, shift;
pin_to_reg_bank(range->gc, offset, &reg, &pin_offset, &bank);
bank = gc_to_pin_bank(range->gc);
drvdata = pinctrl_dev_get_drvdata(pctldev);
pin_offset = offset - bank->pin_base;
reg = drvdata->virt_base + bank->pctl_offset;
mask = (1 << bank->func_width) - 1;
shift = pin_offset * bank->func_width;
@ -366,7 +378,7 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
u32 cfg_value, cfg_reg;
drvdata = pinctrl_dev_get_drvdata(pctldev);
pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, &reg_base,
pin_to_reg_bank(drvdata, pin - drvdata->ctrl->base, &reg_base,
&pin_offset, &bank);
switch (cfg_type) {
@ -391,6 +403,9 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
return -EINVAL;
}
if (!width)
return -EINVAL;
mask = (1 << width) - 1;
shift = pin_offset * width;
data = readl(reg_base + cfg_reg);
@ -463,14 +478,16 @@ static struct pinconf_ops samsung_pinconf_ops = {
/* gpiolib gpio_set callback function */
static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
{
struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
void __iomem *reg;
u32 pin_offset, data;
u32 data;
reg = bank->drvdata->virt_base + bank->pctl_offset;
pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
data = readl(reg + DAT_REG);
data &= ~(1 << pin_offset);
data &= ~(1 << offset);
if (value)
data |= 1 << pin_offset;
data |= 1 << offset;
writel(data, reg + DAT_REG);
}
@ -478,11 +495,13 @@ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
{
void __iomem *reg;
u32 pin_offset, data;
u32 data;
struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
reg = bank->drvdata->virt_base + bank->pctl_offset;
pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
data = readl(reg + DAT_REG);
data >>= pin_offset;
data >>= offset;
data &= 1;
return data;
}
@ -509,6 +528,23 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
return pinctrl_gpio_direction_output(gc->base + offset);
}
/*
* gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin
* and a virtual IRQ, if not already present.
*/
static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct samsung_pin_bank *bank = gc_to_pin_bank(gc);
unsigned int virq;
if (!bank->irq_domain)
return -ENXIO;
virq = irq_create_mapping(bank->irq_domain, offset);
return (virq) ? : -ENXIO;
}
/*
* Parse the pin names listed in the 'samsung,pins' property and convert it
* into a list of gpio numbers are create a pin group from it.
@ -597,7 +633,7 @@ static int __devinit samsung_pinctrl_parse_dt(struct platform_device *pdev,
*/
for_each_child_of_node(dev_np, cfg_np) {
u32 function;
if (of_find_property(cfg_np, "interrupt-controller", NULL))
if (!of_find_property(cfg_np, "samsung,pins", NULL))
continue;
ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np,
@ -712,12 +748,16 @@ static int __devinit samsung_pinctrl_register(struct platform_device *pdev,
return -EINVAL;
}
drvdata->grange.name = "samsung-pctrl-gpio-range";
drvdata->grange.id = 0;
drvdata->grange.base = drvdata->ctrl->base;
drvdata->grange.npins = drvdata->ctrl->nr_pins;
drvdata->grange.gc = drvdata->gc;
pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange);
for (bank = 0; bank < drvdata->ctrl->nr_banks; ++bank) {
pin_bank = &drvdata->ctrl->pin_banks[bank];
pin_bank->grange.name = pin_bank->name;
pin_bank->grange.id = bank;
pin_bank->grange.pin_base = pin_bank->pin_base;
pin_bank->grange.base = pin_bank->gpio_chip.base;
pin_bank->grange.npins = pin_bank->gpio_chip.ngpio;
pin_bank->grange.gc = &pin_bank->gpio_chip;
pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange);
}
ret = samsung_pinctrl_parse_dt(pdev, drvdata);
if (ret) {
@ -728,68 +768,117 @@ static int __devinit samsung_pinctrl_register(struct platform_device *pdev,
return 0;
}
static const struct gpio_chip samsung_gpiolib_chip = {
.set = samsung_gpio_set,
.get = samsung_gpio_get,
.direction_input = samsung_gpio_direction_input,
.direction_output = samsung_gpio_direction_output,
.to_irq = samsung_gpio_to_irq,
.owner = THIS_MODULE,
};
/* register the gpiolib interface with the gpiolib subsystem */
static int __devinit samsung_gpiolib_register(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
struct samsung_pin_bank *bank = ctrl->pin_banks;
struct gpio_chip *gc;
int ret;
int i;
gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
if (!gc) {
dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n");
return -ENOMEM;
}
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
bank->gpio_chip = samsung_gpiolib_chip;
drvdata->gc = gc;
gc->base = drvdata->ctrl->base;
gc->ngpio = drvdata->ctrl->nr_pins;
gc->dev = &pdev->dev;
gc->set = samsung_gpio_set;
gc->get = samsung_gpio_get;
gc->direction_input = samsung_gpio_direction_input;
gc->direction_output = samsung_gpio_direction_output;
gc->label = drvdata->ctrl->label;
gc->owner = THIS_MODULE;
ret = gpiochip_add(gc);
if (ret) {
dev_err(&pdev->dev, "failed to register gpio_chip %s, error "
"code: %d\n", gc->label, ret);
return ret;
gc = &bank->gpio_chip;
gc->base = ctrl->base + bank->pin_base;
gc->ngpio = bank->nr_pins;
gc->dev = &pdev->dev;
gc->of_node = bank->of_node;
gc->label = bank->name;
ret = gpiochip_add(gc);
if (ret) {
dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n",
gc->label, ret);
goto fail;
}
}
return 0;
fail:
for (--i, --bank; i >= 0; --i, --bank)
if (gpiochip_remove(&bank->gpio_chip))
dev_err(&pdev->dev, "gpio chip %s remove failed\n",
bank->gpio_chip.label);
return ret;
}
/* unregister the gpiolib interface with the gpiolib subsystem */
static int __devinit samsung_gpiolib_unregister(struct platform_device *pdev,
struct samsung_pinctrl_drv_data *drvdata)
{
int ret = gpiochip_remove(drvdata->gc);
if (ret) {
struct samsung_pin_ctrl *ctrl = drvdata->ctrl;
struct samsung_pin_bank *bank = ctrl->pin_banks;
int ret = 0;
int i;
for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank)
ret = gpiochip_remove(&bank->gpio_chip);
if (ret)
dev_err(&pdev->dev, "gpio chip remove failed\n");
return ret;
}
return 0;
return ret;
}
static const struct of_device_id samsung_pinctrl_dt_match[];
/* retrieve the soc specific data */
static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
struct samsung_pinctrl_drv_data *d,
struct platform_device *pdev)
{
int id;
const struct of_device_id *match;
const struct device_node *node = pdev->dev.of_node;
struct device_node *node = pdev->dev.of_node;
struct device_node *np;
struct samsung_pin_ctrl *ctrl;
struct samsung_pin_bank *bank;
int i;
id = of_alias_get_id(pdev->dev.of_node, "pinctrl");
id = of_alias_get_id(node, "pinctrl");
if (id < 0) {
dev_err(&pdev->dev, "failed to get alias id\n");
return NULL;
}
match = of_match_node(samsung_pinctrl_dt_match, node);
return (struct samsung_pin_ctrl *)match->data + id;
ctrl = (struct samsung_pin_ctrl *)match->data + id;
bank = ctrl->pin_banks;
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
bank->drvdata = d;
bank->pin_base = ctrl->nr_pins;
ctrl->nr_pins += bank->nr_pins;
}
for_each_child_of_node(node, np) {
if (!of_find_property(np, "gpio-controller", NULL))
continue;
bank = ctrl->pin_banks;
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
if (!strcmp(bank->name, np->name)) {
bank->of_node = np;
break;
}
}
}
ctrl->base = pin_base;
pin_base += ctrl->nr_pins;
return ctrl;
}
static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
@ -805,18 +894,18 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
return -ENODEV;
}
ctrl = samsung_pinctrl_get_soc_data(pdev);
if (!ctrl) {
dev_err(&pdev->dev, "driver data not available\n");
return -EINVAL;
}
drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata) {
dev_err(dev, "failed to allocate memory for driver's "
"private data\n");
return -ENOMEM;
}
ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev);
if (!ctrl) {
dev_err(&pdev->dev, "driver data not available\n");
return -EINVAL;
}
drvdata->ctrl = ctrl;
drvdata->dev = dev;

29
drivers/pinctrl/pinctrl-samsung.h
Просмотреть файл

@ -23,6 +23,8 @@
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/gpio.h>
/* register offsets within a pin bank */
#define DAT_REG 0x4
#define PUD_REG 0x8
@ -64,6 +66,7 @@ enum pincfg_type {
* @EINT_TYPE_NONE: bank does not support external interrupts
* @EINT_TYPE_GPIO: bank supportes external gpio interrupts
* @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
* @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts
*
* Samsung GPIO controller groups all the available pins into banks. The pins
* in a pin bank can support external gpio interrupts or external wakeup
@ -76,6 +79,7 @@ enum eint_type {
EINT_TYPE_NONE,
EINT_TYPE_GPIO,
EINT_TYPE_WKUP,
EINT_TYPE_WKUP_MUX,
};
/* maximum length of a pin in pin descriptor (example: "gpa0-0") */
@ -109,8 +113,12 @@ struct samsung_pinctrl_drv_data;
* @conpdn_width: width of the sleep mode function selector bin field.
* @pudpdn_width: width of the sleep mode pull up/down selector bit field.
* @eint_type: type of the external interrupt supported by the bank.
* @irq_base: starting controller local irq number of the bank.
* @name: name to be prefixed for each pin in this pin bank.
* @of_node: OF node of the bank.
* @drvdata: link to controller driver data
* @irq_domain: IRQ domain of the bank.
* @gpio_chip: GPIO chip of the bank.
* @grange: linux gpio pin range supported by this bank.
*/
struct samsung_pin_bank {
u32 pctl_offset;
@ -122,8 +130,13 @@ struct samsung_pin_bank {
u8 conpdn_width;
u8 pudpdn_width;
enum eint_type eint_type;
u32 irq_base;
u32 eint_offset;
char *name;
struct device_node *of_node;
struct samsung_pinctrl_drv_data *drvdata;
struct irq_domain *irq_domain;
struct gpio_chip gpio_chip;
struct pinctrl_gpio_range grange;
};
/**
@ -132,8 +145,6 @@ struct samsung_pin_bank {
* @nr_banks: number of pin banks.
* @base: starting system wide pin number.
* @nr_pins: number of pins supported by the controller.
* @nr_gint: number of external gpio interrupts supported.
* @nr_wint: number of external wakeup interrupts supported.
* @geint_con: offset of the ext-gpio controller registers.
* @geint_mask: offset of the ext-gpio interrupt mask registers.
* @geint_pend: offset of the ext-gpio interrupt pending registers.
@ -153,8 +164,6 @@ struct samsung_pin_ctrl {
u32 base;
u32 nr_pins;
u32 nr_gint;
u32 nr_wint;
u32 geint_con;
u32 geint_mask;
@ -183,8 +192,6 @@ struct samsung_pin_ctrl {
* @nr_groups: number of such pin groups.
* @pmx_functions: list of pin functions available to the driver.
* @nr_function: number of such pin functions.
* @gc: gpio_chip instance registered with gpiolib.
* @grange: linux gpio pin range supported by this controller.
*/
struct samsung_pinctrl_drv_data {
void __iomem *virt_base;
@ -199,12 +206,6 @@ struct samsung_pinctrl_drv_data {
unsigned int nr_groups;
const struct samsung_pmx_func *pmx_functions;
unsigned int nr_functions;
struct irq_domain *gpio_irqd;
struct irq_domain *wkup_irqd;
struct gpio_chip *gc;
struct pinctrl_gpio_range grange;
};
/**