[ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB)

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/Kconfig

@@ -196,6 +196,11 @@ config MACH_LITTLETON
 	select PXA3xx
 	select PXA_SSP
 
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
+	select PXA930
+
 config MACH_ARMCORE
 	bool "CompuLab CM-X270 modules"
 	select PXA27x

arch/arm/mach-pxa/Makefile

@@ -50,6 +50,7 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o

arch/arm/mach-pxa/tavorevb.c

@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa3xx-regs.h>
+#include <asm/arch/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (TAVOREVB_ETH_PHYS + 0x300),
+		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &tavorevb_smc91x_info,
+	},
+};
+
+static void __init tavorevb_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = tavorevb_init,
+MACHINE_END