ARM: OMAP3: Initialize regulators for Beagle and Overo
Initialize regulators for Beagle and Overo. Patch is based on earlier patches posted to linux-omap mailing list. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
David Brownell
Tony Lindgren
Родитель
b583f26d51
Коммит
bb3b9d8eb9
|
|
@ -28,6 +28,7 @@
|
|||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/i2c/twl4030.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
|
|
@ -120,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = {
|
|||
{} /* Terminator */
|
||||
};
|
||||
|
||||
static struct platform_device omap3_beagle_lcd_device = {
|
||||
.name = "omap3beagle_lcd",
|
||||
.id = -1,
|
||||
};
|
||||
|
||||
static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
|
||||
.ctrl_name = "internal",
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply beagle_vmmc1_supply = {
|
||||
.supply = "vmmc",
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply beagle_vsim_supply = {
|
||||
.supply = "vmmc_aux",
|
||||
};
|
||||
|
||||
static struct gpio_led gpio_leds[];
|
||||
|
||||
static int beagle_twl_gpio_setup(struct device *dev,
|
||||
|
|
@ -130,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
|
|||
mmc[0].gpio_cd = gpio + 0;
|
||||
twl4030_mmc_init(mmc);
|
||||
|
||||
/* link regulators to MMC adapters */
|
||||
beagle_vmmc1_supply.dev = mmc[0].dev;
|
||||
beagle_vsim_supply.dev = mmc[0].dev;
|
||||
|
||||
/* REVISIT: need ehci-omap hooks for external VBUS
|
||||
* power switch and overcurrent detect
|
||||
*/
|
||||
|
|
@ -158,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
|
|||
.setup = beagle_twl_gpio_setup,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply beagle_vdac_supply = {
|
||||
.supply = "vdac",
|
||||
.dev = &omap3_beagle_lcd_device.dev,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply beagle_vdvi_supply = {
|
||||
.supply = "vdvi",
|
||||
.dev = &omap3_beagle_lcd_device.dev,
|
||||
};
|
||||
|
||||
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
|
||||
static struct regulator_init_data beagle_vmmc1 = {
|
||||
.constraints = {
|
||||
.min_uV = 1850000,
|
||||
.max_uV = 3150000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
||||
| REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &beagle_vmmc1_supply,
|
||||
};
|
||||
|
||||
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
|
||||
static struct regulator_init_data beagle_vsim = {
|
||||
.constraints = {
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 3000000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
||||
| REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &beagle_vsim_supply,
|
||||
};
|
||||
|
||||
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
|
||||
static struct regulator_init_data beagle_vdac = {
|
||||
.constraints = {
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 1800000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &beagle_vdac_supply,
|
||||
};
|
||||
|
||||
/* VPLL2 for digital video outputs */
|
||||
static struct regulator_init_data beagle_vpll2 = {
|
||||
.constraints = {
|
||||
.name = "VDVI",
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 1800000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &beagle_vdvi_supply,
|
||||
};
|
||||
|
||||
static struct twl4030_platform_data beagle_twldata = {
|
||||
.irq_base = TWL4030_IRQ_BASE,
|
||||
.irq_end = TWL4030_IRQ_END,
|
||||
|
||||
/* platform_data for children goes here */
|
||||
.gpio = &beagle_gpio_data,
|
||||
.vmmc1 = &beagle_vmmc1,
|
||||
.vsim = &beagle_vsim,
|
||||
.vdac = &beagle_vdac,
|
||||
.vpll2 = &beagle_vpll2,
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
|
||||
|
|
@ -195,15 +290,6 @@ static void __init omap3_beagle_init_irq(void)
|
|||
omap_gpio_init();
|
||||
}
|
||||
|
||||
static struct platform_device omap3_beagle_lcd_device = {
|
||||
.name = "omap3beagle_lcd",
|
||||
.id = -1,
|
||||
};
|
||||
|
||||
static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
|
||||
.ctrl_name = "internal",
|
||||
};
|
||||
|
||||
static struct gpio_led gpio_leds[] = {
|
||||
{
|
||||
.name = "beagleboard::usr0",
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@
|
|||
#include <linux/kernel.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c/twl4030.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
|
|
@ -272,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = {
|
|||
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
|
||||
};
|
||||
|
||||
static struct twl4030_hsmmc_info mmc[] = {
|
||||
{
|
||||
.mmc = 1,
|
||||
.wires = 4,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = -EINVAL,
|
||||
},
|
||||
{
|
||||
.mmc = 2,
|
||||
.wires = 4,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = -EINVAL,
|
||||
.transceiver = true,
|
||||
.ocr_mask = 0x00100000, /* 3.3V */
|
||||
},
|
||||
{} /* Terminator */
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply overo_vmmc1_supply = {
|
||||
.supply = "vmmc",
|
||||
};
|
||||
|
||||
static int overo_twl_gpio_setup(struct device *dev,
|
||||
unsigned gpio, unsigned ngpio)
|
||||
{
|
||||
twl4030_mmc_init(mmc);
|
||||
|
||||
overo_vmmc1_supply.dev = mmc[0].dev;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct twl4030_gpio_platform_data overo_gpio_data = {
|
||||
.gpio_base = OMAP_MAX_GPIO_LINES,
|
||||
.irq_base = TWL4030_GPIO_IRQ_BASE,
|
||||
.irq_end = TWL4030_GPIO_IRQ_END,
|
||||
.setup = overo_twl_gpio_setup,
|
||||
};
|
||||
|
||||
static struct twl4030_usb_data overo_usb_data = {
|
||||
.usb_mode = T2_USB_MODE_ULPI,
|
||||
};
|
||||
|
||||
static struct regulator_init_data overo_vmmc1 = {
|
||||
.constraints = {
|
||||
.min_uV = 1850000,
|
||||
.max_uV = 3150000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
||||
| REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &overo_vmmc1_supply,
|
||||
};
|
||||
|
||||
/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
|
||||
|
||||
static struct twl4030_platform_data overo_twldata = {
|
||||
.irq_base = TWL4030_IRQ_BASE,
|
||||
.irq_end = TWL4030_IRQ_END,
|
||||
.gpio = &overo_gpio_data,
|
||||
.usb = &overo_usb_data,
|
||||
.vmmc1 = &overo_vmmc1,
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("twl4030", 0x48),
|
||||
I2C_BOARD_INFO("tps65950", 0x48),
|
||||
.flags = I2C_CLIENT_WAKE,
|
||||
.irq = INT_34XX_SYS_NIRQ,
|
||||
.platform_data = &overo_twldata,
|
||||
|
|
@ -327,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = {
|
|||
&overo_lcd_device,
|
||||
};
|
||||
|
||||
static struct twl4030_hsmmc_info mmc[] __initdata = {
|
||||
{
|
||||
.mmc = 1,
|
||||
.wires = 4,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = -EINVAL,
|
||||
},
|
||||
{
|
||||
.mmc = 2,
|
||||
.wires = 4,
|
||||
.gpio_cd = -EINVAL,
|
||||
.gpio_wp = -EINVAL,
|
||||
.transceiver = true,
|
||||
},
|
||||
{} /* Terminator */
|
||||
};
|
||||
|
||||
static void __init overo_init(void)
|
||||
{
|
||||
overo_i2c_init();
|
||||
|
|
@ -351,7 +390,6 @@ static void __init overo_init(void)
|
|||
omap_board_config = overo_config;
|
||||
omap_board_config_size = ARRAY_SIZE(overo_config);
|
||||
omap_serial_init();
|
||||
twl4030_mmc_init(mmc);
|
||||
overo_flash_init();
|
||||
usb_musb_init();
|
||||
overo_ads7846_init();
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче