net/sonic: Clean up and modernize log messages

Add missing printk severity levels by adopting pr_foo() calls for the
platform_driver and dev_foo() calls for the nubus_driver.
Avoid KERN_CONT usage as per advice from checkpatch.
Avoid #ifdef around printk calls.
Don't log driver probe messages after calling register_netdev().

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Chris Zankel <chris@zankel.net>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Finn Thain 2018-02-24 18:27:25 -05:00 коммит произвёл David S. Miller
Родитель 3d16bada58
Коммит bbc2f23a8f
3 изменённых файлов: 32 добавлений и 39 удалений

Просмотреть файл

@ -142,17 +142,14 @@ static int sonic_probe1(struct net_device *dev)
i++;
if (known_revisions[i] == 0xffff) {
printk("SONIC ethernet controller not found (0x%4x)\n",
silicon_revision);
pr_info("SONIC ethernet controller not found (0x%4x)\n",
silicon_revision);
goto out;
}
if (sonic_debug && version_printed++ == 0)
printk(version);
printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ",
dev_name(lp->device), dev->base_addr);
/*
* Put the sonic into software reset, then
* retrieve and print the ethernet address.
@ -245,12 +242,14 @@ static int jazz_sonic_probe(struct platform_device *pdev)
err = sonic_probe1(dev);
if (err)
goto out;
pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
dev->base_addr, dev->dev_addr, dev->irq);
err = register_netdev(dev);
if (err)
goto out1;
printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq);
return 0;
out1:

Просмотреть файл

@ -311,8 +311,6 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
int sr;
bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM;
printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
/* Bogus probing, on the models which may or may not have
Ethernet (BTW, the Ethernet *is* always at the same
address, and nothing else lives there, at least if Apple's
@ -322,13 +320,11 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
if (!card_present) {
printk("none.\n");
pr_info("Onboard/comm-slot SONIC not found\n");
return -ENODEV;
}
}
printk("yes\n");
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
dev->base_addr = ONBOARD_SONIC_REGISTERS;
@ -341,14 +337,11 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
printk(KERN_INFO "%s", version);
sonic_version_printed = 1;
}
printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
dev_name(lp->device), dev->base_addr);
/* The PowerBook's SONIC is 16 bit always. */
if (macintosh_config->ident == MAC_MODEL_PB520) {
lp->reg_offset = 0;
lp->dma_bitmode = SONIC_BITMODE16;
sr = SONIC_READ(SONIC_SR);
} else if (commslot) {
/* Some of the comm-slot cards are 16 bit. But some
of them are not. The 32-bit cards use offset 2 and
@ -365,22 +358,21 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
else {
lp->dma_bitmode = SONIC_BITMODE16;
lp->reg_offset = 0;
sr = SONIC_READ(SONIC_SR);
}
} else {
/* All onboard cards are at offset 2 with 32 bit DMA. */
lp->reg_offset = 2;
lp->dma_bitmode = SONIC_BITMODE32;
sr = SONIC_READ(SONIC_SR);
}
printk(KERN_INFO
"%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset);
#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
#endif
pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n",
SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16,
lp->reg_offset);
/* This is sometimes useful to find out how MacOS configured the card */
pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
SONIC_READ(SONIC_DCR) & 0xffff,
SONIC_READ(SONIC_DCR2) & 0xffff);
/* Software reset, then initialize control registers. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@ -401,6 +393,9 @@ static int mac_onboard_sonic_probe(struct net_device *dev)
/* Now look for the MAC address. */
mac_onboard_sonic_ethernet_addr(dev);
pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
dev->base_addr, dev->dev_addr, dev->irq);
/* Shared init code */
return macsonic_init(dev);
}
@ -508,15 +503,15 @@ static int mac_sonic_nubus_probe_board(struct nubus_board *board, int id,
printk(KERN_INFO "%s", version);
sonic_version_printed = 1;
}
printk(KERN_INFO "%s: %s in slot %X\n",
dev_name(lp->device), board->name, board->slot);
printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
#endif
dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n",
board->name, SONIC_READ(SONIC_SR),
lp->dma_bitmode ? 32 : 16, lp->reg_offset);
/* This is sometimes useful to find out how MacOS configured the card */
dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
SONIC_READ(SONIC_DCR) & 0xffff,
SONIC_READ(SONIC_DCR2) & 0xffff);
/* Software reset, then initialize control registers. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
@ -564,8 +559,6 @@ static int mac_sonic_platform_probe(struct platform_device *pdev)
if (err)
goto out;
printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq);
return 0;
out:

Просмотреть файл

@ -155,8 +155,8 @@ static int __init sonic_probe1(struct net_device *dev)
i++;
if (known_revisions[i] == 0xffff) {
printk("SONIC ethernet controller not found (0x%4x)\n",
silicon_revision);
pr_info("SONIC ethernet controller not found (0x%4x)\n",
silicon_revision);
return -ENODEV;
}
@ -273,12 +273,13 @@ int xtsonic_probe(struct platform_device *pdev)
if ((err = sonic_probe1(dev)))
goto out;
pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
dev->base_addr, dev->dev_addr, dev->irq);
if ((err = register_netdev(dev)))
goto out1;
printk("%s: SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", dev->name,
dev->base_addr, dev->dev_addr, dev->irq);
return 0;
out1: