net: dsa: qca8k: add explicit SGMII PLL enable
Support enabling PLL on the SGMII CPU port. Some device require this special configuration or no traffic is transmitted and the switch doesn't work at all. A dedicated binding is added to the CPU node port to apply the correct reg on mac config. Fail to correctly configure sgmii with qca8327 switch and warn if pll is used on qca8337 with a revision greater than 1. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Родитель
13ad5ccc09
Коммит
bbc4799e8b
|
@ -1002,6 +1002,18 @@ qca8k_parse_port_config(struct qca8k_priv *priv)
|
|||
if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
|
||||
priv->sgmii_rx_clk_falling_edge = true;
|
||||
|
||||
if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
|
||||
priv->sgmii_enable_pll = true;
|
||||
|
||||
if (priv->switch_id == QCA8K_ID_QCA8327) {
|
||||
dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
|
||||
priv->sgmii_enable_pll = false;
|
||||
}
|
||||
|
||||
if (priv->switch_revision < 2)
|
||||
dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
|
||||
}
|
||||
|
||||
break;
|
||||
default:
|
||||
continue;
|
||||
|
@ -1312,8 +1324,11 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
|
|||
if (ret)
|
||||
return;
|
||||
|
||||
val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
|
||||
QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD;
|
||||
val |= QCA8K_SGMII_EN_SD;
|
||||
|
||||
if (priv->sgmii_enable_pll)
|
||||
val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
|
||||
QCA8K_SGMII_EN_TX;
|
||||
|
||||
if (dsa_is_cpu_port(ds, port)) {
|
||||
/* CPU port, we're talking to the CPU MAC, be a PHY */
|
||||
|
|
|
@ -266,6 +266,7 @@ struct qca8k_priv {
|
|||
u8 switch_revision;
|
||||
bool sgmii_rx_clk_falling_edge;
|
||||
bool sgmii_tx_clk_falling_edge;
|
||||
bool sgmii_enable_pll;
|
||||
u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
|
||||
u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
|
||||
bool legacy_phy_port_mapping;
|
||||
|
|
Загрузка…
Ссылка в новой задаче