V4L/DVB (4863): Adding support for Pinnacle PCTV 400e DVB-S
Adding support for Pinnacle PCTV 400e DVB-S. The module name is called ttusb2, because it this device (and other Pinnacle devices) is using the USB-protocol originally used by Technotrend device. I'm suspecting Technotrend as the device-designer. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Patrick Boettcher
Mauro Carvalho Chehab
Родитель
8949f1a242
Коммит
bc2e3913c7
|
|
@ -160,6 +160,17 @@ config DVB_USB_NOVA_T_USB2
|
|||
help
|
||||
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
|
||||
|
||||
config DVB_USB_TTUSB2
|
||||
tristate "Pinnacle 400e DVB-S USB2.0 support"
|
||||
depends on DVB_USB
|
||||
select DVB_TDA10086 if !DVB_FE_CUSTOMISE
|
||||
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
|
||||
select DVB_TDA826X if !DVB_FE_CUSTOMISE
|
||||
help
|
||||
Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
|
||||
firmware protocol used by this module is similar to the one used by the
|
||||
old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
|
||||
|
||||
config DVB_USB_DTT200U
|
||||
tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
|
||||
depends on DVB_USB
|
||||
|
|
|
|||
|
|
@ -36,6 +36,9 @@ obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o
|
|||
dvb-usb-cxusb-objs = cxusb.o
|
||||
obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o
|
||||
|
||||
dvb-usb-ttusb2-objs = ttusb2.o
|
||||
obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o
|
||||
|
||||
dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o
|
||||
obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,270 @@
|
|||
/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
|
||||
* (e.g. Pinnacle 400e DVB-S USB2.0).
|
||||
*
|
||||
* The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes.
|
||||
*
|
||||
* TDA8263 + TDA10086
|
||||
*
|
||||
* I2C addresses:
|
||||
* 0x08 - LNBP21PD - LNB power supply
|
||||
* 0x0e - TDA10086 - Demodulator
|
||||
* 0x50 - FX2 eeprom
|
||||
* 0x60 - TDA8263 - Tuner
|
||||
* 0x78 ???
|
||||
*
|
||||
* Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
|
||||
* Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
|
||||
* Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation, version 2.
|
||||
*
|
||||
* see Documentation/dvb/README.dvb-usb for more information
|
||||
*/
|
||||
#define DVB_USB_LOG_PREFIX "ttusb2"
|
||||
#include "dvb-usb.h"
|
||||
|
||||
#include "ttusb2.h"
|
||||
|
||||
#include "tda826x.h"
|
||||
#include "tda10086.h"
|
||||
#include "lnbp21.h"
|
||||
|
||||
/* debug */
|
||||
static int dvb_usb_ttusb2_debug;
|
||||
#define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args)
|
||||
module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
|
||||
MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
|
||||
|
||||
struct ttusb2_state {
|
||||
u8 id;
|
||||
};
|
||||
|
||||
static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
|
||||
u8 *wbuf, int wlen, u8 *rbuf, int rlen)
|
||||
{
|
||||
struct ttusb2_state *st = d->priv;
|
||||
u8 s[wlen+4],r[64] = { 0 };
|
||||
int ret = 0;
|
||||
|
||||
memset(s,0,wlen+4);
|
||||
|
||||
s[0] = 0xaa;
|
||||
s[1] = ++st->id;
|
||||
s[2] = cmd;
|
||||
s[3] = wlen;
|
||||
memcpy(&s[4],wbuf,wlen);
|
||||
|
||||
ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0);
|
||||
|
||||
if (ret != 0 ||
|
||||
r[0] != 0x55 ||
|
||||
r[1] != s[1] ||
|
||||
r[2] != cmd ||
|
||||
(rlen > 0 && r[3] != rlen)) {
|
||||
warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
if (rlen > 0)
|
||||
memcpy(rbuf, &r[4], rlen);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
|
||||
{
|
||||
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
||||
static u8 obuf[60], ibuf[60];
|
||||
int i,read;
|
||||
|
||||
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
||||
return -EAGAIN;
|
||||
|
||||
if (num > 2)
|
||||
warn("more than 2 i2c messages at a time is not handled yet. TODO.");
|
||||
|
||||
for (i = 0; i < num; i++) {
|
||||
read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
|
||||
|
||||
obuf[0] = (msg[i].addr << 1) | read;
|
||||
obuf[1] = msg[i].len;
|
||||
|
||||
/* read request */
|
||||
if (read)
|
||||
obuf[2] = msg[i+1].len;
|
||||
else
|
||||
obuf[2] = 0;
|
||||
|
||||
memcpy(&obuf[3],msg[i].buf,msg[i].len);
|
||||
|
||||
if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
|
||||
err("i2c transfer failed.");
|
||||
break;
|
||||
}
|
||||
|
||||
if (read) {
|
||||
memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
|
||||
i++;
|
||||
}
|
||||
}
|
||||
|
||||
mutex_unlock(&d->i2c_mutex);
|
||||
return i;
|
||||
}
|
||||
|
||||
static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
|
||||
{
|
||||
return I2C_FUNC_I2C;
|
||||
}
|
||||
|
||||
static struct i2c_algorithm ttusb2_i2c_algo = {
|
||||
.master_xfer = ttusb2_i2c_xfer,
|
||||
.functionality = ttusb2_i2c_func,
|
||||
};
|
||||
|
||||
/* Callbacks for DVB USB */
|
||||
static int ttusb2_identify_state (struct usb_device *udev, struct
|
||||
dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
|
||||
int *cold)
|
||||
{
|
||||
*cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
|
||||
{
|
||||
u8 b = onoff;
|
||||
ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0);
|
||||
return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0);
|
||||
}
|
||||
|
||||
|
||||
static struct tda10086_config tda10086_config = {
|
||||
.demod_address = 0x0e,
|
||||
.invert = 0,
|
||||
};
|
||||
|
||||
static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
if (usb_set_interface(adap->dev->udev,0,3) < 0)
|
||||
err("set interface to alts=3 failed");
|
||||
|
||||
if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
|
||||
deb_info("TDA10086 attach failed\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
|
||||
deb_info("TDA8263 attach failed\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
|
||||
deb_info("LNBP21 attach failed\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* DVB USB Driver stuff */
|
||||
static struct dvb_usb_device_properties ttusb2_properties;
|
||||
|
||||
static int ttusb2_probe(struct usb_interface *intf,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
return dvb_usb_device_init(intf,&ttusb2_properties,THIS_MODULE,NULL);
|
||||
}
|
||||
|
||||
static struct usb_device_id ttusb2_table [] = {
|
||||
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
|
||||
{} /* Terminating entry */
|
||||
};
|
||||
MODULE_DEVICE_TABLE (usb, ttusb2_table);
|
||||
|
||||
static struct dvb_usb_device_properties ttusb2_properties = {
|
||||
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
||||
|
||||
.usb_ctrl = CYPRESS_FX2,
|
||||
.firmware = "dvb-usb-pctv-400e-01.fw",
|
||||
|
||||
.size_of_priv = sizeof(struct ttusb2_state),
|
||||
|
||||
.num_adapters = 1,
|
||||
.adapter = {
|
||||
{
|
||||
.streaming_ctrl = NULL, // ttusb2_streaming_ctrl,
|
||||
|
||||
.frontend_attach = ttusb2_frontend_attach,
|
||||
.tuner_attach = ttusb2_tuner_attach,
|
||||
|
||||
/* parameter for the MPEG2-data transfer */
|
||||
.stream = {
|
||||
.type = USB_ISOC,
|
||||
.count = 5,
|
||||
.endpoint = 0x02,
|
||||
.u = {
|
||||
.isoc = {
|
||||
.framesperurb = 4,
|
||||
.framesize = 940,
|
||||
.interval = 1,
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
|
||||
.power_ctrl = ttusb2_power_ctrl,
|
||||
.identify_state = ttusb2_identify_state,
|
||||
|
||||
.i2c_algo = &ttusb2_i2c_algo,
|
||||
|
||||
.generic_bulk_ctrl_endpoint = 0x01,
|
||||
|
||||
.num_device_descs = 1,
|
||||
.devices = {
|
||||
{ "Pinnacle 400e DVB-S USB2.0",
|
||||
{ &ttusb2_table[0], NULL },
|
||||
{ NULL },
|
||||
},
|
||||
}
|
||||
};
|
||||
|
||||
static struct usb_driver ttusb2_driver = {
|
||||
.name = "dvb_usb_ttusb2",
|
||||
.probe = ttusb2_probe,
|
||||
.disconnect = dvb_usb_device_exit,
|
||||
.id_table = ttusb2_table,
|
||||
};
|
||||
|
||||
/* module stuff */
|
||||
static int __init ttusb2_module_init(void)
|
||||
{
|
||||
int result;
|
||||
if ((result = usb_register(&ttusb2_driver))) {
|
||||
err("usb_register failed. Error number %d",result);
|
||||
return result;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __exit ttusb2_module_exit(void)
|
||||
{
|
||||
/* deregister this driver from the USB subsystem */
|
||||
usb_deregister(&ttusb2_driver);
|
||||
}
|
||||
|
||||
module_init (ttusb2_module_init);
|
||||
module_exit (ttusb2_module_exit);
|
||||
|
||||
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
|
||||
MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
|
||||
MODULE_VERSION("1.0");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,70 @@
|
|||
/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
|
||||
* (e.g. Pinnacle 400e DVB-S USB2.0).
|
||||
*
|
||||
* Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
|
||||
* Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
|
||||
* Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation, version 2.
|
||||
*
|
||||
* see Documentation/dvb/README.dvb-usb for more information
|
||||
*/
|
||||
#ifndef _DVB_USB_TTUSB2_H_
|
||||
#define _DVB_USB_TTUSB2_H_
|
||||
|
||||
/* TTUSB protocol
|
||||
*
|
||||
* always to messages (out/in)
|
||||
* out message:
|
||||
* 0xaa <id> <cmdbyte> <datalen> <data...>
|
||||
*
|
||||
* in message (complete block is always 0x40 bytes long)
|
||||
* 0x55 <id> <cmdbyte> <datalen> <data...>
|
||||
*
|
||||
* id is incremented for each transaction
|
||||
*/
|
||||
|
||||
#define CMD_DSP_DOWNLOAD 0x13
|
||||
/* out data: <byte>[28]
|
||||
* last block must be empty */
|
||||
|
||||
#define CMD_DSP_BOOT 0x14
|
||||
/* out data: nothing */
|
||||
|
||||
#define CMD_POWER 0x15
|
||||
/* out data: <on=1/off=0> */
|
||||
|
||||
#define CMD_LNB 0x16
|
||||
/* out data: <power=1> <18V=0,13V=1> <tone> <??=1> <??=1> */
|
||||
|
||||
#define CMD_GET_VERSION 0x17
|
||||
/* in data: <version_byte>[5] */
|
||||
|
||||
#define CMD_DISEQC 0x18
|
||||
/* out data: <master=0xff/burst=??> <cmdlen> <cmdbytes>[cmdlen] */
|
||||
|
||||
#define CMD_PID_ENABLE 0x22
|
||||
/* out data: <index> <type: ts=1/sec=2> <pid msb> <pid lsb> */
|
||||
|
||||
#define CMD_PID_DISABLE 0x23
|
||||
/* out data: <index> */
|
||||
|
||||
#define CMD_FILTER_ENABLE 0x24
|
||||
/* out data: <index> <pid_idx> <filter>[12] <mask>[12] */
|
||||
|
||||
#define CMD_FILTER_DISABLE 0x25
|
||||
/* out data: <index> */
|
||||
|
||||
#define CMD_GET_DSP_VERSION 0x26
|
||||
/* in data: <version_byte>[28] */
|
||||
|
||||
#define CMD_I2C_XFER 0x31
|
||||
/* out data: <addr << 1> <sndlen> <rcvlen> <data>[sndlen]
|
||||
* in data: <addr << 1> <sndlen> <rcvlen> <data>[rcvlen] */
|
||||
|
||||
#define CMD_I2C_BITRATE 0x32
|
||||
/* out data: <default=0> */
|
||||
|
||||
#endif
|
||||
Загрузка…
Ссылка в новой задаче