mtd: nand: fix Samsung SLC NAND identification regression

A combination of the following two commits caused a regression in 3.7-rc1
when identifying some Samsung NAND, so that some previously working NAND
were no longer detected properly:

    commit e3b88bd604
    mtd: nand: add generic READ ID length calculation functions

    commit e2d3a35ee4
    mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID

Particularly, a regression was seen on Samsung K9F2G08U0B, with the
following full 8-byte READ ID string:

    ec da 10 95 44 00 ec da

The basic problem is that Samsung manufactures both SLC and MLC NAND
that use a non-standard decoding table for deriving information from
their IDs. I have heuristically determined that all the chips that use
the new table have ID strings which wrap around after the 6th byte.
Unfortunately, I overlooked the fact that some older Samsung SLC (which
use a different decoding table) have "5 byte ID strings" which also wrap
around after the 6th byte.

This patch re-introduces a distinction between these old and new Samsung
NAND by checking that the 6th byte is non-zero, allowing both old and
new Samsung NAND to be detected properly.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Tested-by: Brian Norris <computersforpeace@gmail.com>
Reported-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

drivers/mtd/nand/nand_base.c

@@ -2983,13 +2983,14 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
 	/*
 	 * Field definitions are in the following datasheets:
 	 * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
-	 * New style   (6 byte ID): Samsung K9GAG08U0F (p.44)
+	 * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
 	 * Hynix MLC   (6 byte ID): Hynix H27UBG8T2B (p.22)
 	 *
-	 * Check for ID length, cell type, and Hynix/Samsung ID to decide what
-	 * to do.
+	 * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
+	 * ID to decide what to do.
 	 */
-	if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) {
+	if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
+			id_data[5] != 0x00) {
 		/* Calc pagesize */
 		mtd->writesize = 2048 << (extid & 0x03);
 		extid >>= 2;