Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-algo-bit: Add pre- and post-xfer hooks
  at24: Init dynamic bin_attribute structures
  i2c: Drop configure option I2C_DEBUG_CHIP
  tsl2550: Move from i2c/chips to misc
  i2c-i801: Don't use the block buffer for I2C block writes
  i2c-powermac: Be less verbose in the absence of real errors.
  i2c-smbus: Use device_lock/device_unlock

drivers/i2c/Kconfig

@@ -73,7 +73,6 @@ config I2C_SMBUS
 
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
-source drivers/i2c/chips/Kconfig
 
 config I2C_DEBUG_CORE
 	bool "I2C Core debugging messages"
@@ -98,12 +97,4 @@ config I2C_DEBUG_BUS
 	  a problem with I2C support and want to see more of what is going
 	  on.
 
-config I2C_DEBUG_CHIP
-	bool "I2C Chip debugging messages"
-	help
-	  Say Y here if you want the I2C chip drivers to produce a bunch of
-	  debug messages to the system log.  Select this if you are having
-	  a problem with I2C support and want to see more of what is going
-	  on.
-
 endif # I2C

drivers/i2c/Makefile

@@ -6,7 +6,7 @@ obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
 obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
-obj-y				+= busses/ chips/ algos/
+obj-y				+= algos/ busses/
 
 ifeq ($(CONFIG_I2C_DEBUG_CORE),y)
 EXTRA_CFLAGS += -DDEBUG

drivers/i2c/algos/i2c-algo-bit.c

@@ -522,6 +522,12 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
 	int i, ret;
 	unsigned short nak_ok;
 
+	if (adap->pre_xfer) {
+		ret = adap->pre_xfer(i2c_adap);
+		if (ret < 0)
+			return ret;
+	}
+
 	bit_dbg(3, &i2c_adap->dev, "emitting start condition\n");
 	i2c_start(adap);
 	for (i = 0; i < num; i++) {
@@ -570,6 +576,9 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
 bailout:
 	bit_dbg(3, &i2c_adap->dev, "emitting stop condition\n");
 	i2c_stop(adap);
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
 	return ret;
 }
 

drivers/i2c/busses/i2c-i801.c

@@ -416,9 +416,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		data->block[0] = 32;	/* max for SMBus block reads */
 	}
 
+	/* Experience has shown that the block buffer can only be used for
+	   SMBus (not I2C) block transactions, even though the datasheet
+	   doesn't mention this limitation. */
 	if ((i801_features & FEATURE_BLOCK_BUFFER)
-	 && !(command == I2C_SMBUS_I2C_BLOCK_DATA
-	      && read_write == I2C_SMBUS_READ)
+	 && command != I2C_SMBUS_I2C_BLOCK_DATA
 	 && i801_set_block_buffer_mode() == 0)
 		result = i801_block_transaction_by_block(data, read_write,
 							 hwpec);

drivers/i2c/busses/i2c-powermac.c

@@ -122,9 +122,14 @@ static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
 
 	rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
 	if (rc) {
-		dev_err(&adap->dev,
-			"I2C transfer at 0x%02x failed, size %d, err %d\n",
-			addrdir >> 1, size, rc);
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
+		else
+			dev_err(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
 		goto bail;
 	}
 
@@ -175,10 +180,16 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 		goto bail;
 	}
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
-	if (rc < 0)
-		dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
-			addrdir & 1 ? "read from" : "write to", addrdir >> 1,
-			rc);
+	if (rc < 0) {
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+		else
+			dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+	}
  bail:
 	pmac_i2c_close(bus);
 	return rc < 0 ? rc : 1;

drivers/i2c/chips/Kconfig

@@ -1,19 +0,0 @@
-#
-# Miscellaneous I2C chip drivers configuration
-#
-# *** DEPRECATED! Do not add new entries! See Makefile ***
-#
-
-menu "Miscellaneous I2C Chip support"
-
-config SENSORS_TSL2550
-	tristate "Taos TSL2550 ambient light sensor"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get support for the Taos TSL2550
-	  ambient light sensor.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called tsl2550.
-
-endmenu

drivers/i2c/chips/Makefile

@@ -1,18 +0,0 @@
-#
-# Makefile for miscellaneous I2C chip drivers.
-#
-# Do not add new drivers to this directory! It is DEPRECATED.
-#
-# Device drivers are better grouped according to the functionality they
-# implement rather than to the bus they are connected to. In particular:
-# * Hardware monitoring chip drivers go to drivers/hwmon
-# * RTC chip drivers go to drivers/rtc
-# * I/O expander drivers go to drivers/gpio
-#
-
-obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-
-ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
-

drivers/i2c/i2c-smbus.c

@@ -22,7 +22,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/device.h>
-#include <linux/semaphore.h>
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
@@ -55,7 +54,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 	 * Drivers should either disable alerts, or provide at least
 	 * a minimal handler.  Lock so client->driver won't change.
 	 */
-	down(&dev->sem);
+	device_lock(dev);
 	if (client->driver) {
 		if (client->driver->alert)
 			client->driver->alert(client, data->flag);
@@ -63,7 +62,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 			dev_warn(&client->dev, "no driver alert()!\n");
 	} else
 		dev_dbg(&client->dev, "alert with no driver\n");
-	up(&dev->sem);
+	device_unlock(dev);
 
 	/* Stop iterating after we find the device */
 	return -EBUSY;

drivers/misc/Kconfig

@@ -268,6 +268,16 @@ config ISL29003
 	  This driver can also be built as a module.  If so, the module
 	  will be called isl29003.
 
+config SENSORS_TSL2550
+	tristate "Taos TSL2550 ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Taos TSL2550
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2550.
+
 config EP93XX_PWM
 	tristate "EP93xx PWM support"
 	depends on ARCH_EP93XX

drivers/misc/Makefile

@@ -21,6 +21,7 @@ obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
+obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o

drivers/misc/eeprom/at24.c

@@ -505,6 +505,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * Export the EEPROM bytes through sysfs, since that's convenient.
 	 * By default, only root should see the data (maybe passwords etc)
 	 */
+	sysfs_bin_attr_init(&at24->bin);
 	at24->bin.attr.name = "eeprom";
 	at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
 	at24->bin.read = at24_bin_read;

drivers/misc/tsl2550.c

@@ -47,8 +47,8 @@ struct tsl2550_data {
 	struct i2c_client *client;
 	struct mutex update_lock;
 
-	unsigned int power_state : 1;
-	unsigned int operating_mode : 1;
+	unsigned int power_state:1;
+	unsigned int operating_mode:1;
 };
 
 /*

include/linux/i2c-algo-bit.h

@@ -36,6 +36,8 @@ struct i2c_algo_bit_data {
 	void (*setscl) (void *data, int state);
 	int  (*getsda) (void *data);
 	int  (*getscl) (void *data);
+	int  (*pre_xfer)  (struct i2c_adapter *);
+	void (*post_xfer) (struct i2c_adapter *);
 
 	/* local settings */
 	int udelay;		/* half clock cycle time in us,