ARM: at91: remove at91sam9rl legacy board support
Remove legacy support for at91sam9rl boards. This include board files removal plus all legacy code for non DT boards support. Use the Device Tree for running this board with newer kernels. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: Add sentence about DT] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Nicolas Ferre
Родитель
4bf7753b8a
Коммит
bcf8c7e770
|
|
@ -1,92 +0,0 @@
|
|||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91SAM9RL=y
|
||||
CONFIG_MACH_AT91SAM9RLEK=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=4
|
||||
CONFIG_BLK_DEV_RAM_SIZE=24576
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_POWER_RESET=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91SAM9X_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_ATMEL=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_ATMEL_USBA=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_ATMELMCI=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_PWM=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91SAM9=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_AT91_ADC=y
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_ATMEL=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_ISO8859_15=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
|
|
@ -33,12 +33,6 @@ config ARCH_AT91SAM9263
|
|||
select AT91_USE_OLD_CLK
|
||||
select OLD_IRQ_AT91
|
||||
|
||||
config ARCH_AT91SAM9RL
|
||||
bool "AT91SAM9RL"
|
||||
select SOC_AT91SAM9RL
|
||||
select AT91_USE_OLD_CLK
|
||||
select OLD_IRQ_AT91
|
||||
|
||||
endchoice
|
||||
|
||||
config ARCH_AT91SAM9G20
|
||||
|
|
@ -281,19 +275,6 @@ endif
|
|||
|
||||
# ----------------------------------------------------------
|
||||
|
||||
if ARCH_AT91SAM9RL
|
||||
|
||||
comment "AT91SAM9RL Board Type"
|
||||
|
||||
config MACH_AT91SAM9RLEK
|
||||
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
|
||||
help
|
||||
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
|
||||
|
||||
endif
|
||||
|
||||
# ----------------------------------------------------------
|
||||
|
||||
comment "AT91 Board Options"
|
||||
|
||||
config MTD_AT91_DATAFLASH_CARD
|
||||
|
|
|
|||
|
|
@ -24,7 +24,6 @@ obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
|
|||
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
|
||||
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
|
||||
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
|
||||
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o
|
||||
|
||||
# AT91RM9200 board-specific support
|
||||
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
|
||||
|
|
@ -56,9 +55,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
|
|||
# AT91SAM9263 board-specific support
|
||||
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
|
||||
|
||||
# AT91SAM9RL board-specific support
|
||||
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
|
||||
|
||||
# AT91SAM9G20 board-specific support
|
||||
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
|
||||
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
|
||||
|
|
|
|||
|
|
@ -9,284 +9,13 @@
|
|||
* more details.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/clk/at91_pmc.h>
|
||||
|
||||
#include <asm/proc-fns.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/system_misc.h>
|
||||
#include <mach/cpu.h>
|
||||
#include <mach/at91_dbgu.h>
|
||||
#include <mach/at91sam9rl.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#include "at91_aic.h"
|
||||
#include "soc.h"
|
||||
#include "generic.h"
|
||||
#include "sam9_smc.h"
|
||||
#include "pm.h"
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* Clocks
|
||||
* -------------------------------------------------------------------- */
|
||||
#if defined(CONFIG_OLD_CLK_AT91)
|
||||
#include "clock.h"
|
||||
|
||||
/*
|
||||
* The peripheral clocks.
|
||||
*/
|
||||
static struct clk pioA_clk = {
|
||||
.name = "pioA_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_PIOA,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk pioB_clk = {
|
||||
.name = "pioB_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_PIOB,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk pioC_clk = {
|
||||
.name = "pioC_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_PIOC,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk pioD_clk = {
|
||||
.name = "pioD_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_PIOD,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk usart0_clk = {
|
||||
.name = "usart0_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_US0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk usart1_clk = {
|
||||
.name = "usart1_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_US1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk usart2_clk = {
|
||||
.name = "usart2_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_US2,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk usart3_clk = {
|
||||
.name = "usart3_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_US3,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk mmc_clk = {
|
||||
.name = "mci_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_MCI,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk twi0_clk = {
|
||||
.name = "twi0_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_TWI0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk twi1_clk = {
|
||||
.name = "twi1_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_TWI1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk spi_clk = {
|
||||
.name = "spi_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_SPI,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk ssc0_clk = {
|
||||
.name = "ssc0_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_SSC0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk ssc1_clk = {
|
||||
.name = "ssc1_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_SSC1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk tc0_clk = {
|
||||
.name = "tc0_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_TC0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk tc1_clk = {
|
||||
.name = "tc1_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_TC1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk tc2_clk = {
|
||||
.name = "tc2_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_TC2,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk pwm_clk = {
|
||||
.name = "pwm_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk tsc_clk = {
|
||||
.name = "tsc_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_TSC,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk dma_clk = {
|
||||
.name = "dma_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_DMA,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk udphs_clk = {
|
||||
.name = "udphs_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_UDPHS,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk lcdc_clk = {
|
||||
.name = "lcdc_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_LCDC,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk ac97_clk = {
|
||||
.name = "ac97_clk",
|
||||
.pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk adc_op_clk = {
|
||||
.name = "adc_op_clk",
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.rate_hz = 1000000,
|
||||
};
|
||||
|
||||
static struct clk *periph_clocks[] __initdata = {
|
||||
&pioA_clk,
|
||||
&pioB_clk,
|
||||
&pioC_clk,
|
||||
&pioD_clk,
|
||||
&usart0_clk,
|
||||
&usart1_clk,
|
||||
&usart2_clk,
|
||||
&usart3_clk,
|
||||
&mmc_clk,
|
||||
&twi0_clk,
|
||||
&twi1_clk,
|
||||
&spi_clk,
|
||||
&ssc0_clk,
|
||||
&ssc1_clk,
|
||||
&tc0_clk,
|
||||
&tc1_clk,
|
||||
&tc2_clk,
|
||||
&pwm_clk,
|
||||
&tsc_clk,
|
||||
&dma_clk,
|
||||
&udphs_clk,
|
||||
&lcdc_clk,
|
||||
&ac97_clk,
|
||||
&adc_op_clk,
|
||||
// irq0
|
||||
};
|
||||
|
||||
static struct clk_lookup periph_clocks_lookups[] = {
|
||||
CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
|
||||
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
|
||||
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
|
||||
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
|
||||
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc0_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
|
||||
CLKDEV_CON_ID("pioA", &pioA_clk),
|
||||
CLKDEV_CON_ID("pioB", &pioB_clk),
|
||||
CLKDEV_CON_ID("pioC", &pioC_clk),
|
||||
CLKDEV_CON_ID("pioD", &pioD_clk),
|
||||
/* more lookup table for DT entries */
|
||||
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
|
||||
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
|
||||
CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
|
||||
CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
|
||||
CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
|
||||
CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
|
||||
CLKDEV_CON_ID("adc_clk", &tsc_clk),
|
||||
};
|
||||
|
||||
static struct clk_lookup usart_clocks_lookups[] = {
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
|
||||
};
|
||||
|
||||
/*
|
||||
* The two programmable clocks.
|
||||
* You must configure pin multiplexing to bring these signals out.
|
||||
*/
|
||||
static struct clk pck0 = {
|
||||
.name = "pck0",
|
||||
.pmc_mask = AT91_PMC_PCK0,
|
||||
.type = CLK_TYPE_PROGRAMMABLE,
|
||||
.id = 0,
|
||||
};
|
||||
static struct clk pck1 = {
|
||||
.name = "pck1",
|
||||
.pmc_mask = AT91_PMC_PCK1,
|
||||
.type = CLK_TYPE_PROGRAMMABLE,
|
||||
.id = 1,
|
||||
};
|
||||
|
||||
static void __init at91sam9rl_register_clocks(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
|
||||
clk_register(periph_clocks[i]);
|
||||
|
||||
clkdev_add_table(periph_clocks_lookups,
|
||||
ARRAY_SIZE(periph_clocks_lookups));
|
||||
clkdev_add_table(usart_clocks_lookups,
|
||||
ARRAY_SIZE(usart_clocks_lookups));
|
||||
|
||||
clk_register(&pck0);
|
||||
clk_register(&pck1);
|
||||
}
|
||||
#endif
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* GPIO
|
||||
* -------------------------------------------------------------------- */
|
||||
|
||||
static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
|
||||
{
|
||||
.id = AT91SAM9RL_ID_PIOA,
|
||||
.regbase = AT91SAM9RL_BASE_PIOA,
|
||||
}, {
|
||||
.id = AT91SAM9RL_ID_PIOB,
|
||||
.regbase = AT91SAM9RL_BASE_PIOB,
|
||||
}, {
|
||||
.id = AT91SAM9RL_ID_PIOC,
|
||||
.regbase = AT91SAM9RL_BASE_PIOC,
|
||||
}, {
|
||||
.id = AT91SAM9RL_ID_PIOD,
|
||||
.regbase = AT91SAM9RL_BASE_PIOD,
|
||||
}
|
||||
};
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* AT91SAM9RL processor initialization
|
||||
|
|
@ -309,107 +38,14 @@ static void __init at91sam9rl_map_io(void)
|
|||
at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
|
||||
}
|
||||
|
||||
static void __init at91sam9rl_ioremap_registers(void)
|
||||
{
|
||||
at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
|
||||
at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
|
||||
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
|
||||
at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
|
||||
at91_pm_set_standby(at91sam9_sdram_standby);
|
||||
}
|
||||
|
||||
static void __init at91sam9rl_initialize(void)
|
||||
{
|
||||
arm_pm_idle = at91sam9_idle;
|
||||
|
||||
at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
|
||||
at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
|
||||
|
||||
/* Register GPIO subsystem */
|
||||
at91_gpio_init(at91sam9rl_gpio, 4);
|
||||
}
|
||||
|
||||
static struct resource rstc_resources[] = {
|
||||
[0] = {
|
||||
.start = AT91SAM9RL_BASE_RSTC,
|
||||
.end = AT91SAM9RL_BASE_RSTC + SZ_16 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = AT91SAM9RL_BASE_SDRAMC,
|
||||
.end = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device rstc_device = {
|
||||
.name = "at91-sam9260-reset",
|
||||
.resource = rstc_resources,
|
||||
.num_resources = ARRAY_SIZE(rstc_resources),
|
||||
};
|
||||
|
||||
static struct resource shdwc_resources[] = {
|
||||
[0] = {
|
||||
.start = AT91SAM9RL_BASE_SHDWC,
|
||||
.end = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device shdwc_device = {
|
||||
.name = "at91-poweroff",
|
||||
.resource = shdwc_resources,
|
||||
.num_resources = ARRAY_SIZE(shdwc_resources),
|
||||
};
|
||||
|
||||
static void __init at91sam9rl_register_devices(void)
|
||||
{
|
||||
platform_device_register(&rstc_device);
|
||||
platform_device_register(&shdwc_device);
|
||||
}
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* Interrupt initialization
|
||||
* -------------------------------------------------------------------- */
|
||||
|
||||
/*
|
||||
* The default interrupt priority levels (0 = lowest, 7 = highest).
|
||||
*/
|
||||
static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
||||
7, /* Advanced Interrupt Controller */
|
||||
7, /* System Peripherals */
|
||||
1, /* Parallel IO Controller A */
|
||||
1, /* Parallel IO Controller B */
|
||||
1, /* Parallel IO Controller C */
|
||||
1, /* Parallel IO Controller D */
|
||||
5, /* USART 0 */
|
||||
5, /* USART 1 */
|
||||
5, /* USART 2 */
|
||||
5, /* USART 3 */
|
||||
0, /* Multimedia Card Interface */
|
||||
6, /* Two-Wire Interface 0 */
|
||||
6, /* Two-Wire Interface 1 */
|
||||
5, /* Serial Peripheral Interface */
|
||||
4, /* Serial Synchronous Controller 0 */
|
||||
4, /* Serial Synchronous Controller 1 */
|
||||
0, /* Timer Counter 0 */
|
||||
0, /* Timer Counter 1 */
|
||||
0, /* Timer Counter 2 */
|
||||
0,
|
||||
0, /* Touch Screen Controller */
|
||||
0, /* DMA Controller */
|
||||
2, /* USB Device High speed port */
|
||||
2, /* LCD Controller */
|
||||
6, /* AC97 Controller */
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0, /* Advanced Interrupt Controller */
|
||||
};
|
||||
|
||||
static void __init at91sam9rl_init_time(void)
|
||||
{
|
||||
at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
|
||||
|
|
@ -417,13 +53,6 @@ static void __init at91sam9rl_init_time(void)
|
|||
|
||||
AT91_SOC_START(at91sam9rl)
|
||||
.map_io = at91sam9rl_map_io,
|
||||
.default_irq_priority = at91sam9rl_default_irq_priority,
|
||||
.extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
|
||||
.ioremap_registers = at91sam9rl_ioremap_registers,
|
||||
#if defined(CONFIG_OLD_CLK_AT91)
|
||||
.register_clocks = at91sam9rl_register_clocks,
|
||||
#endif
|
||||
.register_devices = at91sam9rl_register_devices,
|
||||
.init = at91sam9rl_initialize,
|
||||
.init_time = at91sam9rl_init_time,
|
||||
AT91_SOC_END
|
||||
|
|
|
|||
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
|
|
@ -1,333 +0,0 @@
|
|||
/*
|
||||
* Copyright (C) 2005 SAN People
|
||||
* Copyright (C) 2007 Atmel Corporation
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file COPYING in the main directory of this archive for
|
||||
* more details.
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/platform_data/at91_adc.h>
|
||||
|
||||
#include <video/atmel_lcdc.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/at91sam9_smc.h>
|
||||
|
||||
|
||||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "sam9_smc.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init ek_init_early(void)
|
||||
{
|
||||
/* Initialize processor: 12.000 MHz crystal */
|
||||
at91_initialize(12000000);
|
||||
}
|
||||
|
||||
/*
|
||||
* USB HS Device port
|
||||
*/
|
||||
static struct usba_platform_data __initdata ek_usba_udc_data = {
|
||||
.vbus_pin = AT91_PIN_PA8,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* MCI (SD/MMC)
|
||||
*/
|
||||
static struct mci_platform_data __initdata mci0_data = {
|
||||
.slot[0] = {
|
||||
.bus_width = 4,
|
||||
.detect_pin = AT91_PIN_PA15,
|
||||
.wp_pin = -EINVAL,
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* NAND flash
|
||||
*/
|
||||
static struct mtd_partition __initdata ek_nand_partition[] = {
|
||||
{
|
||||
.name = "Partition 1",
|
||||
.offset = 0,
|
||||
.size = SZ_256K,
|
||||
},
|
||||
{
|
||||
.name = "Partition 2",
|
||||
.offset = MTDPART_OFS_NXTBLK,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
},
|
||||
};
|
||||
|
||||
static struct atmel_nand_data __initdata ek_nand_data = {
|
||||
.ale = 21,
|
||||
.cle = 22,
|
||||
.det_pin = -EINVAL,
|
||||
.rdy_pin = AT91_PIN_PD17,
|
||||
.enable_pin = AT91_PIN_PB6,
|
||||
.ecc_mode = NAND_ECC_SOFT,
|
||||
.on_flash_bbt = 1,
|
||||
.parts = ek_nand_partition,
|
||||
.num_parts = ARRAY_SIZE(ek_nand_partition),
|
||||
};
|
||||
|
||||
static struct sam9_smc_config __initdata ek_nand_smc_config = {
|
||||
.ncs_read_setup = 0,
|
||||
.nrd_setup = 1,
|
||||
.ncs_write_setup = 0,
|
||||
.nwe_setup = 1,
|
||||
|
||||
.ncs_read_pulse = 3,
|
||||
.nrd_pulse = 3,
|
||||
.ncs_write_pulse = 3,
|
||||
.nwe_pulse = 3,
|
||||
|
||||
.read_cycle = 5,
|
||||
.write_cycle = 5,
|
||||
|
||||
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
|
||||
.tdf_cycles = 2,
|
||||
};
|
||||
|
||||
static void __init ek_add_device_nand(void)
|
||||
{
|
||||
/* configure chip-select 3 (NAND) */
|
||||
sam9_smc_configure(0, 3, &ek_nand_smc_config);
|
||||
|
||||
at91_add_device_nand(&ek_nand_data);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* SPI devices
|
||||
*/
|
||||
static struct spi_board_info ek_spi_devices[] = {
|
||||
{ /* DataFlash chip */
|
||||
.modalias = "mtd_dataflash",
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 15 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
},
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* LCD Controller
|
||||
*/
|
||||
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
||||
static struct fb_videomode at91_tft_vga_modes[] = {
|
||||
{
|
||||
.name = "TX09D50VM1CCA @ 60",
|
||||
.refresh = 60,
|
||||
.xres = 240, .yres = 320,
|
||||
.pixclock = KHZ2PICOS(4965),
|
||||
|
||||
.left_margin = 1, .right_margin = 33,
|
||||
.upper_margin = 1, .lower_margin = 0,
|
||||
.hsync_len = 5, .vsync_len = 1,
|
||||
|
||||
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
},
|
||||
};
|
||||
|
||||
static struct fb_monspecs at91fb_default_monspecs = {
|
||||
.manufacturer = "HIT",
|
||||
.monitor = "TX09D50VM1CCA",
|
||||
|
||||
.modedb = at91_tft_vga_modes,
|
||||
.modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
|
||||
.hfmin = 15000,
|
||||
.hfmax = 64000,
|
||||
.vfmin = 50,
|
||||
.vfmax = 150,
|
||||
};
|
||||
|
||||
#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
|
||||
| ATMEL_LCDC_DISTYPE_TFT \
|
||||
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
|
||||
|
||||
static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
|
||||
{
|
||||
if (on)
|
||||
at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
|
||||
else
|
||||
at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
|
||||
}
|
||||
|
||||
/* Driver datas */
|
||||
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
|
||||
.lcdcon_is_backlight = true,
|
||||
.default_bpp = 16,
|
||||
.default_dmacon = ATMEL_LCDC_DMAEN,
|
||||
.default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
|
||||
.default_monspecs = &at91fb_default_monspecs,
|
||||
.atmel_lcdfb_power_control = at91_lcdc_power_control,
|
||||
.guard_time = 1,
|
||||
.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
|
||||
};
|
||||
|
||||
#else
|
||||
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* AC97
|
||||
* reset_pin is not connected: NRST
|
||||
*/
|
||||
static struct ac97c_platform_data ek_ac97_data = {
|
||||
.reset_pin = -EINVAL,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* LEDs
|
||||
*/
|
||||
static struct gpio_led ek_leds[] = {
|
||||
{ /* "bottom" led, green, userled1 to be defined */
|
||||
.name = "ds1",
|
||||
.gpio = AT91_PIN_PD15,
|
||||
.active_low = 1,
|
||||
.default_trigger = "none",
|
||||
},
|
||||
{ /* "bottom" led, green, userled2 to be defined */
|
||||
.name = "ds2",
|
||||
.gpio = AT91_PIN_PD16,
|
||||
.active_low = 1,
|
||||
.default_trigger = "none",
|
||||
},
|
||||
{ /* "power" led, yellow */
|
||||
.name = "ds3",
|
||||
.gpio = AT91_PIN_PD14,
|
||||
.default_trigger = "heartbeat",
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* ADC + Touchscreen
|
||||
*/
|
||||
static struct at91_adc_data ek_adc_data = {
|
||||
.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
|
||||
.use_external_triggers = true,
|
||||
.vref = 3300,
|
||||
.touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* GPIO Buttons
|
||||
*/
|
||||
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
||||
static struct gpio_keys_button ek_buttons[] = {
|
||||
{
|
||||
.gpio = AT91_PIN_PB0,
|
||||
.code = BTN_2,
|
||||
.desc = "Right Click",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
},
|
||||
{
|
||||
.gpio = AT91_PIN_PB1,
|
||||
.code = BTN_1,
|
||||
.desc = "Left Click",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data ek_button_data = {
|
||||
.buttons = ek_buttons,
|
||||
.nbuttons = ARRAY_SIZE(ek_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device ek_button_device = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.num_resources = 0,
|
||||
.dev = {
|
||||
.platform_data = &ek_button_data,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init ek_add_device_buttons(void)
|
||||
{
|
||||
at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */
|
||||
at91_set_deglitch(AT91_PIN_PB1, 1);
|
||||
at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */
|
||||
at91_set_deglitch(AT91_PIN_PB0, 1);
|
||||
|
||||
platform_device_register(&ek_button_device);
|
||||
}
|
||||
#else
|
||||
static void __init ek_add_device_buttons(void) {}
|
||||
#endif
|
||||
|
||||
|
||||
static void __init ek_board_init(void)
|
||||
{
|
||||
at91_register_devices();
|
||||
|
||||
/* Serial */
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
|
||||
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
|
||||
at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
||||
at91_add_device_serial();
|
||||
/* USB HS */
|
||||
at91_add_device_usba(&ek_usba_udc_data);
|
||||
/* I2C */
|
||||
at91_add_device_i2c(NULL, 0);
|
||||
/* NAND */
|
||||
ek_add_device_nand();
|
||||
/* SPI */
|
||||
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
|
||||
/* MMC */
|
||||
at91_add_device_mci(0, &mci0_data);
|
||||
/* LCD Controller */
|
||||
at91_add_device_lcdc(&ek_lcdc_data);
|
||||
/* AC97 */
|
||||
at91_add_device_ac97(&ek_ac97_data);
|
||||
/* Touch Screen Controller + ADC */
|
||||
at91_add_device_adc(&ek_adc_data);
|
||||
/* LEDs */
|
||||
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
|
||||
/* Push Buttons */
|
||||
ek_add_device_buttons();
|
||||
}
|
||||
|
||||
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
|
||||
/* Maintainer: Atmel */
|
||||
.init_time = at91_init_time,
|
||||
.map_io = at91_map_io,
|
||||
.handle_irq = at91_aic_handle_irq,
|
||||
.init_early = ek_init_early,
|
||||
.init_irq = at91_init_irq_default,
|
||||
.init_machine = ek_board_init,
|
||||
MACHINE_END
|
||||
Загрузка…
Ссылка в новой задаче