powerpc/pseries: Prevent free CPU ids being reused on another node

When a CPU is hot added, the CPU ids are taken from the available mask
from the lower possible set. If that set of values was previously used
for a CPU attached to a different node, it appears to an application as
if these CPUs have migrated from one node to another node which is not
expected.

To prevent this, it is needed to record the CPU ids used for each node
and to not reuse them on another node. However, to prevent CPU hot plug
to fail, in the case the CPU ids is starved on a node, the capability to
reuse other nodes’ free CPU ids is kept. A warning is displayed in such
a case to warn the user.

A new CPU bit mask (node_recorded_ids_map) is introduced for each
possible node. It is populated with the CPU onlined at boot time, and
then when a CPU is hot plugged to a node. The bits in that mask remain
when the CPU is hot unplugged, to remind this CPU ids have been used for
this node.

If no id set was found, a retry is made without removing the ids used on
the other nodes to try reusing them. This is the way ids have been
allocated prior to this patch.

The effect of this patch can be seen by removing and adding CPUs using
the Qemu monitor. In the following case, the first CPU from the node 2
is removed, then the first one from the node 1 is removed too. Later,
the first CPU of the node 2 is added back. Without that patch, the
kernel will number these CPUs using the first CPU ids available which
are the ones freed when removing the second CPU of the node 0. This
leads to the CPU ids 16-23 to move from the node 1 to the node 2. With
the patch applied, the CPU ids 32-39 are used since they are the lowest
free ones which have not been used on another node.

At boot time:
  [root@vm40 ~]# numactl -H | grep cpus
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
  node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
  node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Vanilla kernel, after the CPU hot unplug/plug operations:
  [root@vm40 ~]# numactl -H | grep cpus
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
  node 1 cpus: 24 25 26 27 28 29 30 31
  node 2 cpus: 16 17 18 19 20 21 22 23 40 41 42 43 44 45 46 47

Patched kernel, after the CPU hot unplug/plug operations:
  [root@vm40 ~]# numactl -H | grep cpus
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
  node 1 cpus: 24 25 26 27 28 29 30 31
  node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210429174908.16613-1-ldufour@linux.ibm.com
This commit is contained in:
Laurent Dufour 2021-04-29 19:49:08 +02:00 коммит произвёл Michael Ellerman
Родитель d144f4d5a8
Коммит bd1dd4c5f5
1 изменённых файлов: 132 добавлений и 39 удалений

Просмотреть файл

@ -39,6 +39,12 @@
/* This version can't take the spinlock, because it never returns */
static int rtas_stop_self_token = RTAS_UNKNOWN_SERVICE;
/*
* Record the CPU ids used on each nodes.
* Protected by cpu_add_remove_lock.
*/
static cpumask_var_t node_recorded_ids_map[MAX_NUMNODES];
static void rtas_stop_self(void)
{
static struct rtas_args args;
@ -139,72 +145,148 @@ static void pseries_cpu_die(unsigned int cpu)
paca_ptrs[cpu]->cpu_start = 0;
}
/**
* find_cpu_id_range - found a linear ranger of @nthreads free CPU ids.
* @nthreads : the number of threads (cpu ids)
* @assigned_node : the node it belongs to or NUMA_NO_NODE if free ids from any
* node can be peek.
* @cpu_mask: the returned CPU mask.
*
* Returns 0 on success.
*/
static int find_cpu_id_range(unsigned int nthreads, int assigned_node,
cpumask_var_t *cpu_mask)
{
cpumask_var_t candidate_mask;
unsigned int cpu, node;
int rc = -ENOSPC;
if (!zalloc_cpumask_var(&candidate_mask, GFP_KERNEL))
return -ENOMEM;
cpumask_clear(*cpu_mask);
for (cpu = 0; cpu < nthreads; cpu++)
cpumask_set_cpu(cpu, *cpu_mask);
BUG_ON(!cpumask_subset(cpu_present_mask, cpu_possible_mask));
/* Get a bitmap of unoccupied slots. */
cpumask_xor(candidate_mask, cpu_possible_mask, cpu_present_mask);
if (assigned_node != NUMA_NO_NODE) {
/*
* Remove free ids previously assigned on the other nodes. We
* can walk only online nodes because once a node became online
* it is not turned offlined back.
*/
for_each_online_node(node) {
if (node == assigned_node)
continue;
cpumask_andnot(candidate_mask, candidate_mask,
node_recorded_ids_map[node]);
}
}
if (cpumask_empty(candidate_mask))
goto out;
while (!cpumask_empty(*cpu_mask)) {
if (cpumask_subset(*cpu_mask, candidate_mask))
/* Found a range where we can insert the new cpu(s) */
break;
cpumask_shift_left(*cpu_mask, *cpu_mask, nthreads);
}
if (!cpumask_empty(*cpu_mask))
rc = 0;
out:
free_cpumask_var(candidate_mask);
return rc;
}
/*
* Update cpu_present_mask and paca(s) for a new cpu node. The wrinkle
* here is that a cpu device node may represent up to two logical cpus
* here is that a cpu device node may represent multiple logical cpus
* in the SMT case. We must honor the assumption in other code that
* the logical ids for sibling SMT threads x and y are adjacent, such
* that x^1 == y and y^1 == x.
*/
static int pseries_add_processor(struct device_node *np)
{
unsigned int cpu;
cpumask_var_t candidate_mask, tmp;
int err = -ENOSPC, len, nthreads, i;
int len, nthreads, node, cpu, assigned_node;
int rc = 0;
cpumask_var_t cpu_mask;
const __be32 *intserv;
intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len);
if (!intserv)
return 0;
zalloc_cpumask_var(&candidate_mask, GFP_KERNEL);
zalloc_cpumask_var(&tmp, GFP_KERNEL);
nthreads = len / sizeof(u32);
for (i = 0; i < nthreads; i++)
cpumask_set_cpu(i, tmp);
if (!alloc_cpumask_var(&cpu_mask, GFP_KERNEL))
return -ENOMEM;
/*
* Fetch from the DT nodes read by dlpar_configure_connector() the NUMA
* node id the added CPU belongs to.
*/
node = of_node_to_nid(np);
if (node < 0 || !node_possible(node))
node = first_online_node;
BUG_ON(node == NUMA_NO_NODE);
assigned_node = node;
cpu_maps_update_begin();
BUG_ON(!cpumask_subset(cpu_present_mask, cpu_possible_mask));
/* Get a bitmap of unoccupied slots. */
cpumask_xor(candidate_mask, cpu_possible_mask, cpu_present_mask);
if (cpumask_empty(candidate_mask)) {
/* If we get here, it most likely means that NR_CPUS is
* less than the partition's max processors setting.
rc = find_cpu_id_range(nthreads, node, &cpu_mask);
if (rc && nr_node_ids > 1) {
/*
* Try again, considering the free CPU ids from the other node.
*/
printk(KERN_ERR "Cannot add cpu %pOF; this system configuration"
" supports %d logical cpus.\n", np,
num_possible_cpus());
goto out_unlock;
node = NUMA_NO_NODE;
rc = find_cpu_id_range(nthreads, NUMA_NO_NODE, &cpu_mask);
}
while (!cpumask_empty(tmp))
if (cpumask_subset(tmp, candidate_mask))
/* Found a range where we can insert the new cpu(s) */
break;
else
cpumask_shift_left(tmp, tmp, nthreads);
if (cpumask_empty(tmp)) {
printk(KERN_ERR "Unable to find space in cpu_present_mask for"
" processor %pOFn with %d thread(s)\n", np,
nthreads);
goto out_unlock;
if (rc) {
pr_err("Cannot add cpu %pOF; this system configuration"
" supports %d logical cpus.\n", np, num_possible_cpus());
goto out;
}
for_each_cpu(cpu, tmp) {
for_each_cpu(cpu, cpu_mask) {
BUG_ON(cpu_present(cpu));
set_cpu_present(cpu, true);
set_hard_smp_processor_id(cpu, be32_to_cpu(*intserv++));
}
err = 0;
out_unlock:
/* Record the newly used CPU ids for the associate node. */
cpumask_or(node_recorded_ids_map[assigned_node],
node_recorded_ids_map[assigned_node], cpu_mask);
/*
* If node is set to NUMA_NO_NODE, CPU ids have be reused from
* another node, remove them from its mask.
*/
if (node == NUMA_NO_NODE) {
cpu = cpumask_first(cpu_mask);
pr_warn("Reusing free CPU ids %d-%d from another node\n",
cpu, cpu + nthreads - 1);
for_each_online_node(node) {
if (node == assigned_node)
continue;
cpumask_andnot(node_recorded_ids_map[node],
node_recorded_ids_map[node],
cpu_mask);
}
}
out:
cpu_maps_update_done();
free_cpumask_var(candidate_mask);
free_cpumask_var(tmp);
return err;
free_cpumask_var(cpu_mask);
return rc;
}
/*
@ -908,6 +990,7 @@ static struct notifier_block pseries_smp_nb = {
static int __init pseries_cpu_hotplug_init(void)
{
int qcss_tok;
unsigned int node;
#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
ppc_md.cpu_probe = dlpar_cpu_probe;
@ -929,8 +1012,18 @@ static int __init pseries_cpu_hotplug_init(void)
smp_ops->cpu_die = pseries_cpu_die;
/* Processors can be added/removed only on LPAR */
if (firmware_has_feature(FW_FEATURE_LPAR))
if (firmware_has_feature(FW_FEATURE_LPAR)) {
for_each_node(node) {
alloc_bootmem_cpumask_var(&node_recorded_ids_map[node]);
/* Record ids of CPU added at boot time */
cpumask_or(node_recorded_ids_map[node],
node_recorded_ids_map[node],
node_to_cpumask_map[node]);
}
of_reconfig_notifier_register(&pseries_smp_nb);
}
return 0;
}