md/raid1: don't clear bitmap bit when bad-block-list write fails.
When a write fails and a bad-block-list is present, we can update the bad-block-list instead of writing the data. If this succeeds then it is OK clear the relevant bitmap-bit as no further 'sync' of the block is needed. However if writing the bad-block-list fails then we need to treat the write as failed and particularly must not clear the bitmap bit. Otherwise the device can be re-added (after any hardware connection issues are resolved) and because the relevant bit in the bitmap is clear, that block will not be resynced. This leads to data corruption. We already delay the final bio_endio() on the write until the bad-block-list is written so that when the write returns: either that data is safe, the bad-block record is safe, or the fact that the device is faulty is safe. However we *don't* delay the clearing of the bitmap, so the bitmap bit can be recorded as cleared before we know if the bad-block-list was written safely. So: delay that until the write really is safe. i.e. move the call to close_write() until just before calling bio_endio(), and recheck the 'is array degraded' status before making that call. This bug goes back to v3.1 when bad-block-lists were introduced, though it only affects arrays created with mdadm-3.3 or later as only those have bad-block lists. Backports will require at least Commit:55ce74d4bf
("md/raid1: ensure device failure recorded before write request returns.") as well. I'll send that to 'stable' separately. Note that of the two tests of R1BIO_WriteError that this patch adds, the first is certain to fail and the second is certain to succeed. However doing it this way makes the patch more obviously correct. I will tidy the code up in a future merge window. Reported-and-tested-by: Nate Dailey <nate.dailey@stratus.com> Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Fixes:cd5ff9a16f
("md/raid1: Handle write errors by updating badblock log.") Signed-off-by: NeilBrown <neilb@suse.com>
This commit is contained in:
Родитель
681ab46960
Коммит
bd8688a199
|
@ -2258,15 +2258,16 @@ static void handle_write_finished(struct r1conf *conf, struct r1bio *r1_bio)
|
|||
rdev_dec_pending(conf->mirrors[m].rdev,
|
||||
conf->mddev);
|
||||
}
|
||||
if (test_bit(R1BIO_WriteError, &r1_bio->state))
|
||||
close_write(r1_bio);
|
||||
if (fail) {
|
||||
spin_lock_irq(&conf->device_lock);
|
||||
list_add(&r1_bio->retry_list, &conf->bio_end_io_list);
|
||||
spin_unlock_irq(&conf->device_lock);
|
||||
md_wakeup_thread(conf->mddev->thread);
|
||||
} else
|
||||
} else {
|
||||
if (test_bit(R1BIO_WriteError, &r1_bio->state))
|
||||
close_write(r1_bio);
|
||||
raid_end_bio_io(r1_bio);
|
||||
}
|
||||
}
|
||||
|
||||
static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio)
|
||||
|
@ -2385,6 +2386,10 @@ static void raid1d(struct md_thread *thread)
|
|||
r1_bio = list_first_entry(&tmp, struct r1bio,
|
||||
retry_list);
|
||||
list_del(&r1_bio->retry_list);
|
||||
if (mddev->degraded)
|
||||
set_bit(R1BIO_Degraded, &r1_bio->state);
|
||||
if (test_bit(R1BIO_WriteError, &r1_bio->state))
|
||||
close_write(r1_bio);
|
||||
raid_end_bio_io(r1_bio);
|
||||
}
|
||||
}
|
||||
|
|
Загрузка…
Ссылка в новой задаче