microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300 

* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...
This commit is contained in:
Linus Torvalds 2010-10-27 18:53:26 -07:00
Родитель 7c5814c719 7c7fcf762e
Коммит bdab225015
145 изменённых файлов: 9431 добавлений и 1970 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
Kbuild
Просмотреть файл

@ -53,7 +53,7 @@ targets += arch/$(SRCARCH)/kernel/asm-offsets.s
# Default sed regexp - multiline due to syntax constraints
define sed-y
"/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}"
endef

2
MAINTAINERS
Просмотреть файл

@ -4448,7 +4448,7 @@ L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/panasonic-laptop.c
PANASONIC MN10300/AM33 PORT
PANASONIC MN10300/AM33/AM34 PORT
M: David Howells <dhowells@redhat.com>
M: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
L: linux-am33-list@redhat.com (moderated for non-subscribers)

279
arch/mn10300/Kconfig
Просмотреть файл

@ -9,8 +9,19 @@ config MN10300
def_bool y
select HAVE_OPROFILE
config AM33
def_bool y
config AM33_2
def_bool n
config AM33_3
def_bool n
config AM34_2
def_bool n
select MN10300_HAS_ATOMIC_OPS_UNIT
select MN10300_HAS_CACHE_SNOOP
config ERRATUM_NEED_TO_RELOAD_MMUCTR
def_bool y if AM33_3 || AM34_2
config MMU
def_bool y
@ -37,7 +48,7 @@ config GENERIC_CALIBRATE_DELAY
def_bool y
config GENERIC_CMOS_UPDATE
def_bool y
def_bool n
config GENERIC_FIND_NEXT_BIT
def_bool y
@ -45,6 +56,27 @@ config GENERIC_FIND_NEXT_BIT
config GENERIC_HWEIGHT
def_bool y
config GENERIC_TIME
def_bool y
config GENERIC_CLOCKEVENTS
def_bool y
config GENERIC_CLOCKEVENTS_BUILD
def_bool y
depends on GENERIC_CLOCKEVENTS
config GENERIC_CLOCKEVENTS_BROADCAST
bool
config CEVT_MN10300
def_bool y
depends on GENERIC_CLOCKEVENTS
config CSRC_MN10300
def_bool y
depends on GENERIC_TIME
config GENERIC_BUG
def_bool y
@ -61,18 +93,14 @@ config GENERIC_HARDIRQS
config HOTPLUG_CPU
def_bool n
config HZ
int
default 1000
mainmenu "Matsushita MN10300/AM33 Kernel Configuration"
mainmenu "Panasonic MN10300/AM33 Kernel Configuration"
source "init/Kconfig"
source "kernel/Kconfig.freezer"
menu "Matsushita MN10300 system setup"
menu "Panasonic MN10300 system setup"
choice
prompt "Unit type"
@ -87,6 +115,10 @@ config MN10300_UNIT_ASB2303
config MN10300_UNIT_ASB2305
bool "ASB2305"
config MN10300_UNIT_ASB2364
bool "ASB2364"
select SMSC911X_ARCH_HOOKS if SMSC911X
endchoice
choice
@ -99,57 +131,51 @@ choice
config MN10300_PROC_MN103E010
bool "MN103E010"
depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
select AM33_2
select MN10300_PROC_HAS_TTYSM0
select MN10300_PROC_HAS_TTYSM1
select MN10300_PROC_HAS_TTYSM2
config MN10300_PROC_MN2WS0050
bool "MN2WS0050"
depends on MN10300_UNIT_ASB2364
select AM34_2
select MN10300_PROC_HAS_TTYSM0
select MN10300_PROC_HAS_TTYSM1
select MN10300_PROC_HAS_TTYSM2
endchoice
choice
prompt "Processor core support"
default MN10300_CPU_AM33V2
config MN10300_HAS_ATOMIC_OPS_UNIT
def_bool n
help
This option specifies the processor core for which the kernel will be
compiled. It affects the instruction set used.
config MN10300_CPU_AM33V2
bool "AM33v2"
endchoice
This should be enabled if the processor has an atomic ops unit
capable of doing LL/SC equivalent operations.
config FPU
bool "FPU present"
default y
depends on MN10300_PROC_MN103E010
depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
choice
prompt "CPU Caching mode"
default MN10300_CACHE_WBACK
config LAZY_SAVE_FPU
bool "Save FPU state lazily"
default y
depends on FPU && !SMP
help
This option determines the caching mode for the kernel.
Enable this to be lazy in the saving of the FPU state to the owning
task's thread struct. This is useful if most tasks on the system
don't use the FPU as only those tasks that use it will pass it
between them, and the state needn't be saved for a task that isn't
using it.
Write-Back caching mode involves the all reads and writes causing
the affected cacheline to be read into the cache first before being
operated upon. Memory is not then updated by a write until the cache
is filled and a cacheline needs to be displaced from the cache to
make room. Only at that point is it written back.
This can't be so easily used on SMP as the process that owns the FPU
state on a CPU may be currently running on another CPU, so for the
moment, it is disabled.
Write-Through caching only fetches cachelines from memory on a
read. Writes always get written directly to memory. If the affected
cacheline is also in cache, it will be updated too.
source "arch/mn10300/mm/Kconfig.cache"
The final option is to turn of caching entirely.
config MN10300_CACHE_WBACK
bool "Write-Back"
config MN10300_CACHE_WTHRU
bool "Write-Through"
config MN10300_CACHE_DISABLED
bool "Disabled"
endchoice
config MN10300_TLB_USE_PIDR
def_bool y
menu "Memory layout options"
@ -170,24 +196,55 @@ config KERNEL_TEXT_ADDRESS
config KERNEL_ZIMAGE_BASE_ADDRESS
hex "Base address of compressed vmlinux image"
default "0x90700000"
default "0x50700000"
config BOOT_STACK_OFFSET
hex
default "0xF00" if SMP
default "0xFF0" if !SMP
config BOOT_STACK_SIZE
hex
depends on SMP
default "0x100"
endmenu
config PREEMPT
bool "Preemptible Kernel"
help
This option reduces the latency of the kernel when reacting to
real-time or interactive events by allowing a low priority process to
be preempted even if it is in kernel mode executing a system call.
This allows applications to run more reliably even when the system is
under load.
config SMP
bool "Symmetric multi-processing support"
default y
depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
you have a system with more than one CPU, say Y.
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
See also <file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
config NR_CPUS
int
depends on SMP
default "2"
config USE_GENERIC_SMP_HELPERS
bool
depends on SMP
default y
source "kernel/Kconfig.preempt"
config MN10300_CURRENT_IN_E2
bool "Hold current task address in E2 register"
depends on !SMP
default y
help
This option removes the E2/R2 register from the set available to gcc
@ -209,12 +266,15 @@ config MN10300_USING_JTAG
suppresses the use of certain hardware debugging features, such as
single-stepping, which are taken over completely by the JTAG unit.
source "kernel/Kconfig.hz"
source "kernel/time/Kconfig"
config MN10300_RTC
bool "Using MN10300 RTC"
depends on MN10300_PROC_MN103E010
depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
select GENERIC_CMOS_UPDATE
default n
help
This option enables support for the RTC, thus enabling time to be
tracked, even when system is powered down. This is available on-chip
on the MN103E010.
@ -306,14 +366,23 @@ config MN10300_TTYSM1
choice
prompt "Select the timer to supply the clock for SIF1"
default MN10300_TTYSM0_TIMER9
default MN10300_TTYSM1_TIMER12 \
if !(AM33_2 || AM33_3)
default MN10300_TTYSM1_TIMER9 \
if AM33_2 || AM33_3
depends on MN10300_TTYSM1
config MN10300_TTYSM1_TIMER12
bool "Use timer 12 (16-bit)"
depends on !(AM33_2 || AM33_3)
config MN10300_TTYSM1_TIMER9
bool "Use timer 9 (16-bit)"
depends on AM33_2 || AM33_3
config MN10300_TTYSM1_TIMER3
bool "Use timer 3 (8-bit)"
depends on AM33_2 || AM33_3
endchoice
@ -328,17 +397,107 @@ config MN10300_TTYSM2
choice
prompt "Select the timer to supply the clock for SIF2"
default MN10300_TTYSM0_TIMER10
default MN10300_TTYSM2_TIMER3 \
if !(AM33_2 || AM33_3)
default MN10300_TTYSM2_TIMER10 \
if AM33_2 || AM33_3
depends on MN10300_TTYSM2
config MN10300_TTYSM2_TIMER9
bool "Use timer 9 (16-bit)"
depends on !(AM33_2 || AM33_3)
config MN10300_TTYSM2_TIMER1
bool "Use timer 1 (8-bit)"
depends on !(AM33_2 || AM33_3)
config MN10300_TTYSM2_TIMER3
bool "Use timer 3 (8-bit)"
depends on !(AM33_2 || AM33_3)
config MN10300_TTYSM2_TIMER10
bool "Use timer 10 (16-bit)"
depends on AM33_2 || AM33_3
endchoice
config MN10300_TTYSM2_CTS
bool "Enable the use of the CTS line /dev/ttySM2"
depends on MN10300_TTYSM2
depends on MN10300_TTYSM2 && AM33_2
endmenu
menu "Interrupt request priority options"
comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)"
comment "____Non-maskable interrupt levels____"
comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial"
config GDBSTUB_IRQ_LEVEL
int "GDBSTUB interrupt priority"
depends on GDBSTUB
range 0 1 if LINUX_CLI_LEVEL = 2
range 0 2 if LINUX_CLI_LEVEL = 3
range 0 3 if LINUX_CLI_LEVEL = 4
range 0 4 if LINUX_CLI_LEVEL = 5
range 0 5 if LINUX_CLI_LEVEL = 6
default 0
comment "The following must be set to a higher priority than local_irq_disable()"
config MN10300_SERIAL_IRQ_LEVEL
int "MN10300 on-chip serial interrupt priority"
depends on MN10300_TTYSM
range 1 1 if LINUX_CLI_LEVEL = 2
range 1 2 if LINUX_CLI_LEVEL = 3
range 1 3 if LINUX_CLI_LEVEL = 4
range 1 4 if LINUX_CLI_LEVEL = 5
range 1 5 if LINUX_CLI_LEVEL = 6
default 1
comment "-"
comment "____Maskable interrupt levels____"
config LINUX_CLI_LEVEL
int "The highest interrupt priority excluded by local_irq_disable() (2-6)"
range 2 6
default 2
help
local_irq_disable() doesn't actually disable maskable interrupts -
what it does is restrict the levels of interrupt which are permitted
(a lower level indicates a higher priority) by lowering the value in
EPSW.IM from 7. Any interrupt is permitted for which the level is
lower than EPSW.IM.
Certain interrupts, such as GDBSTUB and virtual MN10300 on-chip
serial DMA interrupts are allowed to interrupt normal disabled
sections.
comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL"
config TIMER_IRQ_LEVEL
int "Kernel timer interrupt priority"
range LINUX_CLI_LEVEL 6
default 4
config PCI_IRQ_LEVEL
int "PCI interrupt priority"
depends on PCI
range LINUX_CLI_LEVEL 6
default 5
config ETHERNET_IRQ_LEVEL
int "Ethernet interrupt priority"
depends on SMC91X || SMC911X || SMSC911X
range LINUX_CLI_LEVEL 6
default 6
config EXT_SERIAL_IRQ_LEVEL
int "External serial port interrupt priority"
depends on SERIAL_8250
range LINUX_CLI_LEVEL 6
default 6
endmenu

6
arch/mn10300/Makefile
Просмотреть файл

@ -36,6 +36,9 @@ endif
ifeq ($(CONFIG_MN10300_PROC_MN103E010),y)
PROCESSOR := mn103e010
endif
ifeq ($(CONFIG_MN10300_PROC_MN2WS0050),y)
PROCESSOR := mn2ws0050
endif
ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y)
UNIT := asb2303
@ -43,6 +46,9 @@ endif
ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y)
UNIT := asb2305
endif
ifeq ($(CONFIG_MN10300_UNIT_ASB2364),y)
UNIT := asb2364
endif
head-y := arch/mn10300/kernel/head.o arch/mn10300/kernel/init_task.o

69
arch/mn10300/boot/compressed/head.S
Просмотреть файл

@ -14,10 +14,29 @@
#include <linux/linkage.h>
#include <asm/cpu-regs.h>
#include <asm/cache.h>
#ifdef CONFIG_SMP
#include <proc/smp-regs.h>
#endif
.globl startup_32
startup_32:
# first save off parameters from bootloader
#ifdef CONFIG_SMP
#
# Secondary CPUs jump directly to the kernel entry point
#
# Must save primary CPU's D0-D2 registers as they hold boot parameters
#
mov (CPUID), d3
and CPUID_MASK,d3
beq startup_primary
mov CONFIG_KERNEL_TEXT_ADDRESS,a0
jmp (a0)
startup_primary:
#endif /* CONFIG_SMP */
# first save parameters from bootloader
mov param_save_area,a0
mov d0,(a0)
mov d1,(4,a0)
@ -37,8 +56,15 @@ startup_32:
mov (a0),d0
btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
lne
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD,d0 # writethru dcache
#ifdef CONFIG_MN10300_CACHE_ENABLED
#ifdef CONFIG_MN10300_CACHE_WBACK
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
#else
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
#endif /* WBACK */
movhu d0,(a0) # enable
#endif /* !ENABLED */
# clear the BSS area
mov __bss_start,a0
@ -54,6 +80,9 @@ bssclear_end:
# decompress the kernel
call decompress_kernel[],0
#ifdef CONFIG_MN10300_CACHE_WBACK
call mn10300_dcache_flush_inv[],0
#endif
# disable caches again
mov CHCTR,a0
@ -69,10 +98,46 @@ bssclear_end:
mov (4,a0),d1
mov (8,a0),d2
# jump to the kernel proper entry point
mov a3,sp
mov CONFIG_KERNEL_TEXT_ADDRESS,a0
jmp (a0)
###############################################################################
#
# Cache flush routines
#
###############################################################################
#ifdef CONFIG_MN10300_CACHE_WBACK
mn10300_dcache_flush_inv:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_dcache_flush_inv_end
mov L1_CACHE_NENTRIES,d1
clr a1
mn10300_dcache_flush_inv_loop:
mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge
add L1_CACHE_BYTES,a1
add -1,d1
bne mn10300_dcache_flush_inv_loop
mn10300_dcache_flush_inv_end:
ret [],0
#endif /* CONFIG_MN10300_CACHE_WBACK */
###############################################################################
#
# Data areas
#
###############################################################################
.data
.align 4
param_save_area:

2
arch/mn10300/configs/asb2303_defconfig
Просмотреть файл

@ -12,6 +12,8 @@ CONFIG_SLAB=y
CONFIG_PROFILING=y
# CONFIG_BLOCK is not set
CONFIG_PREEMPT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_MN10300_RTC=y
CONFIG_MN10300_TTYSM_CONSOLE=y
CONFIG_MN10300_TTYSM0=y

98
arch/mn10300/configs/asb2364_defconfig Normal file
Просмотреть файл

@ -0,0 +1,98 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CGROUPS=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_RELAY=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLOCK is not set
CONFIG_MN10300_UNIT_ASB2364=y
CONFIG_PREEMPT=y
# CONFIG_MN10300_USING_JTAG is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_MN10300_TTYSM_CONSOLE=y
CONFIG_MN10300_TTYSM0=y
CONFIG_MN10300_TTYSM0_TIMER2=y
CONFIG_MN10300_TTYSM1=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_PROC_KCORE=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set

350
arch/mn10300/include/asm/atomic.h
Просмотреть файл

@ -1 +1,351 @@
/* MN10300 Atomic counter operations
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#ifndef _ASM_ATOMIC_H
#define _ASM_ATOMIC_H
#include <asm/irqflags.h>
#ifndef __ASSEMBLY__
#ifdef CONFIG_SMP
#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
static inline
unsigned long __xchg(volatile unsigned long *m, unsigned long val)
{
unsigned long status;
unsigned long oldval;
asm volatile(
"1: mov %4,(_AAR,%3) \n"
" mov (_ADR,%3),%1 \n"
" mov %5,(_ADR,%3) \n"
" mov (_ADR,%3),%0 \n" /* flush */
" mov (_ASR,%3),%0 \n"
" or %0,%0 \n"
" bne 1b \n"
: "=&r"(status), "=&r"(oldval), "=m"(*m)
: "a"(ATOMIC_OPS_BASE_ADDR), "r"(m), "r"(val)
: "memory", "cc");
return oldval;
}
static inline unsigned long __cmpxchg(volatile unsigned long *m,
unsigned long old, unsigned long new)
{
unsigned long status;
unsigned long oldval;
asm volatile(
"1: mov %4,(_AAR,%3) \n"
" mov (_ADR,%3),%1 \n"
" cmp %5,%1 \n"
" bne 2f \n"
" mov %6,(_ADR,%3) \n"
"2: mov (_ADR,%3),%0 \n" /* flush */
" mov (_ASR,%3),%0 \n"
" or %0,%0 \n"
" bne 1b \n"
: "=&r"(status), "=&r"(oldval), "=m"(*m)
: "a"(ATOMIC_OPS_BASE_ADDR), "r"(m),
"r"(old), "r"(new)
: "memory", "cc");
return oldval;
}
#else /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */
#error "No SMP atomic operation support!"
#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */
#else /* CONFIG_SMP */
/*
* Emulate xchg for non-SMP MN10300
*/
struct __xchg_dummy { unsigned long a[100]; };
#define __xg(x) ((struct __xchg_dummy *)(x))
static inline
unsigned long __xchg(volatile unsigned long *m, unsigned long val)
{
unsigned long oldval;
unsigned long flags;
flags = arch_local_cli_save();
oldval = *m;
*m = val;
arch_local_irq_restore(flags);
return oldval;
}
/*
* Emulate cmpxchg for non-SMP MN10300
*/
static inline unsigned long __cmpxchg(volatile unsigned long *m,
unsigned long old, unsigned long new)
{
unsigned long oldval;
unsigned long flags;
flags = arch_local_cli_save();
oldval = *m;
if (oldval == old)
*m = new;
arch_local_irq_restore(flags);
return oldval;
}
#endif /* CONFIG_SMP */
#define xchg(ptr, v) \
((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \
(unsigned long)(v)))
#define cmpxchg(ptr, o, n) \
((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
(unsigned long)(o), \
(unsigned long)(n)))
#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v)))
#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
#endif /* !__ASSEMBLY__ */
#ifndef CONFIG_SMP
#include <asm-generic/atomic.h>
#else
/*
* Atomic operations that C can't guarantee us. Useful for
* resource counting etc..
*/
#define ATOMIC_INIT(i) { (i) }
#ifdef __KERNEL__
/**
* atomic_read - read atomic variable
* @v: pointer of type atomic_t
*
* Atomically reads the value of @v. Note that the guaranteed
* useful range of an atomic_t is only 24 bits.
*/
#define atomic_read(v) ((v)->counter)
/**
* atomic_set - set atomic variable
* @v: pointer of type atomic_t
* @i: required value
*
* Atomically sets the value of @v to @i. Note that the guaranteed
* useful range of an atomic_t is only 24 bits.
*/
#define atomic_set(v, i) (((v)->counter) = (i))
/**
* atomic_add_return - add integer to atomic variable
* @i: integer value to add
* @v: pointer of type atomic_t
*
* Atomically adds @i to @v and returns the result
* Note that the guaranteed useful range of an atomic_t is only 24 bits.
*/
static inline int atomic_add_return(int i, atomic_t *v)
{
int retval;
#ifdef CONFIG_SMP
int status;
asm volatile(
"1: mov %4,(_AAR,%3) \n"
" mov (_ADR,%3),%1 \n"
" add %5,%1 \n"
" mov %1,(_ADR,%3) \n"
" mov (_ADR,%3),%0 \n" /* flush */
" mov (_ASR,%3),%0 \n"
" or %0,%0 \n"
" bne 1b \n"
: "=&r"(status), "=&r"(retval), "=m"(v->counter)
: "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i)
: "memory", "cc");
#else
unsigned long flags;
flags = arch_local_cli_save();
retval = v->counter;
retval += i;
v->counter = retval;
arch_local_irq_restore(flags);
#endif
return retval;
}
/**
* atomic_sub_return - subtract integer from atomic variable
* @i: integer value to subtract
* @v: pointer of type atomic_t
*
* Atomically subtracts @i from @v and returns the result
* Note that the guaranteed useful range of an atomic_t is only 24 bits.
*/
static inline int atomic_sub_return(int i, atomic_t *v)
{
int retval;
#ifdef CONFIG_SMP
int status;
asm volatile(
"1: mov %4,(_AAR,%3) \n"
" mov (_ADR,%3),%1 \n"
" sub %5,%1 \n"
" mov %1,(_ADR,%3) \n"
" mov (_ADR,%3),%0 \n" /* flush */
" mov (_ASR,%3),%0 \n"
" or %0,%0 \n"
" bne 1b \n"
: "=&r"(status), "=&r"(retval), "=m"(v->counter)
: "a"(ATOMIC_OPS_BASE_ADDR), "r"(&v->counter), "r"(i)
: "memory", "cc");
#else
unsigned long flags;
flags = arch_local_cli_save();
retval = v->counter;
retval -= i;
v->counter = retval;
arch_local_irq_restore(flags);
#endif
return retval;
}
static inline int atomic_add_negative(int i, atomic_t *v)
{
return atomic_add_return(i, v) < 0;
}
static inline void atomic_add(int i, atomic_t *v)
{
atomic_add_return(i, v);
}
static inline void atomic_sub(int i, atomic_t *v)
{
atomic_sub_return(i, v);
}
static inline void atomic_inc(atomic_t *v)
{
atomic_add_return(1, v);
}
static inline void atomic_dec(atomic_t *v)
{
atomic_sub_return(1, v);
}
#define atomic_dec_return(v) atomic_sub_return(1, (v))
#define atomic_inc_return(v) atomic_add_return(1, (v))
#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
#define atomic_add_unless(v, a, u) \
({ \
int c, old; \
c = atomic_read(v); \
while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
c = old; \
c != (u); \
})
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
/**
* atomic_clear_mask - Atomically clear bits in memory
* @mask: Mask of the bits to be cleared
* @v: pointer to word in memory
*
* Atomically clears the bits set in mask from the memory word specified.
*/
static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
{
#ifdef CONFIG_SMP
int status;
asm volatile(
"1: mov %3,(_AAR,%2) \n"
" mov (_ADR,%2),%0 \n"
" and %4,%0 \n"
" mov %0,(_ADR,%2) \n"
" mov (_ADR,%2),%0 \n" /* flush */
" mov (_ASR,%2),%0 \n"
" or %0,%0 \n"
" bne 1b \n"
: "=&r"(status), "=m"(*addr)
: "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(~mask)
: "memory", "cc");
#else
unsigned long flags;
mask = ~mask;
flags = arch_local_cli_save();
*addr &= mask;
arch_local_irq_restore(flags);
#endif
}
/**
* atomic_set_mask - Atomically set bits in memory
* @mask: Mask of the bits to be set
* @v: pointer to word in memory
*
* Atomically sets the bits set in mask from the memory word specified.
*/
static inline void atomic_set_mask(unsigned long mask, unsigned long *addr)
{
#ifdef CONFIG_SMP
int status;
asm volatile(
"1: mov %3,(_AAR,%2) \n"
" mov (_ADR,%2),%0 \n"
" or %4,%0 \n"
" mov %0,(_ADR,%2) \n"
" mov (_ADR,%2),%0 \n" /* flush */
" mov (_ASR,%2),%0 \n"
" or %0,%0 \n"
" bne 1b \n"
: "=&r"(status), "=m"(*addr)
: "a"(ATOMIC_OPS_BASE_ADDR), "r"(addr), "r"(mask)
: "memory", "cc");
#else
unsigned long flags;
flags = arch_local_cli_save();
*addr |= mask;
arch_local_irq_restore(flags);
#endif
}
/* Atomic operations are already serializing on MN10300??? */
#define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier()
#define smp_mb__before_atomic_inc() barrier()
#define smp_mb__after_atomic_inc() barrier()
#include <asm-generic/atomic-long.h>
#endif /* __KERNEL__ */
#endif /* CONFIG_SMP */
#endif /* _ASM_ATOMIC_H */

14
arch/mn10300/include/asm/bitops.h
Просмотреть файл

@ -57,7 +57,7 @@
#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
static inline void __clear_bit(int nr, volatile void *addr)
static inline void __clear_bit(unsigned long nr, volatile void *addr)
{
unsigned int *a = (unsigned int *) addr;
int mask;
@ -70,15 +70,15 @@ static inline void __clear_bit(int nr, volatile void *addr)
/*
* test bit
*/
static inline int test_bit(int nr, const volatile void *addr)
static inline int test_bit(unsigned long nr, const volatile void *addr)
{
return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
return 1UL & (((const volatile unsigned int *) addr)[nr >> 5] >> (nr & 31));
}
/*
* change bit
*/
static inline void __change_bit(int nr, volatile void *addr)
static inline void __change_bit(unsigned long nr, volatile void *addr)
{
int mask;
unsigned int *a = (unsigned int *) addr;
@ -88,7 +88,7 @@ static inline void __change_bit(int nr, volatile void *addr)
*a ^= mask;
}
extern void change_bit(int nr, volatile void *addr);
extern void change_bit(unsigned long nr, volatile void *addr);
/*
* test and set bit
@ -135,7 +135,7 @@ extern void change_bit(int nr, volatile void *addr);
/*
* test and change bit
*/
static inline int __test_and_change_bit(int nr, volatile void *addr)
static inline int __test_and_change_bit(unsigned long nr, volatile void *addr)
{
int mask, retval;
unsigned int *a = (unsigned int *)addr;
@ -148,7 +148,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr)
return retval;
}
extern int test_and_change_bit(int nr, volatile void *addr);
extern int test_and_change_bit(unsigned long nr, volatile void *addr);
#include <asm-generic/bitops/lock.h>

14
arch/mn10300/include/asm/cache.h
Просмотреть файл

@ -43,14 +43,18 @@
/* instruction cache access registers */
#define ICACHE_DATA(WAY, ENTRY, OFF) \
__SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
__SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + \
(ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32)
#define ICACHE_TAG(WAY, ENTRY) \
__SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
__SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + \
(ENTRY) * L1_CACHE_BYTES, u32)
/* instruction cache access registers */
/* data cache access registers */
#define DCACHE_DATA(WAY, ENTRY, OFF) \
__SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
__SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + \
(ENTRY) * L1_CACHE_BYTES + (OFF) * 4, u32)
#define DCACHE_TAG(WAY, ENTRY) \
__SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
__SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + \
(ENTRY) * L1_CACHE_BYTES, u32)
#endif /* _ASM_CACHE_H */

166
arch/mn10300/include/asm/cacheflush.h
Просмотреть файл

@ -17,7 +17,104 @@
#include <linux/mm.h>
/*
* virtually-indexed cache management (our cache is physically indexed)
* Primitive routines
*/
#ifdef CONFIG_MN10300_CACHE_ENABLED
extern void mn10300_local_icache_inv(void);
extern void mn10300_local_icache_inv_page(unsigned long start);
extern void mn10300_local_icache_inv_range(unsigned long start, unsigned long end);
extern void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size);
extern void mn10300_local_dcache_inv(void);
extern void mn10300_local_dcache_inv_page(unsigned long start);
extern void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end);
extern void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size);
extern void mn10300_icache_inv(void);
extern void mn10300_icache_inv_page(unsigned long start);
extern void mn10300_icache_inv_range(unsigned long start, unsigned long end);
extern void mn10300_icache_inv_range2(unsigned long start, unsigned long size);
extern void mn10300_dcache_inv(void);
extern void mn10300_dcache_inv_page(unsigned long start);
extern void mn10300_dcache_inv_range(unsigned long start, unsigned long end);
extern void mn10300_dcache_inv_range2(unsigned long start, unsigned long size);
#ifdef CONFIG_MN10300_CACHE_WBACK
extern void mn10300_local_dcache_flush(void);
extern void mn10300_local_dcache_flush_page(unsigned long start);
extern void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end);
extern void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size);
extern void mn10300_local_dcache_flush_inv(void);
extern void mn10300_local_dcache_flush_inv_page(unsigned long start);
extern void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end);
extern void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size);
extern void mn10300_dcache_flush(void);
extern void mn10300_dcache_flush_page(unsigned long start);
extern void mn10300_dcache_flush_range(unsigned long start, unsigned long end);
extern void mn10300_dcache_flush_range2(unsigned long start, unsigned long size);
extern void mn10300_dcache_flush_inv(void);
extern void mn10300_dcache_flush_inv_page(unsigned long start);
extern void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end);
extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size);
#else
#define mn10300_local_dcache_flush() do {} while (0)
#define mn10300_local_dcache_flush_page(start) do {} while (0)
#define mn10300_local_dcache_flush_range(start, end) do {} while (0)
#define mn10300_local_dcache_flush_range2(start, size) do {} while (0)
#define mn10300_local_dcache_flush_inv() \
mn10300_local_dcache_inv()
#define mn10300_local_dcache_flush_inv_page(start) \
mn10300_local_dcache_inv_page(start)
#define mn10300_local_dcache_flush_inv_range(start, end) \
mn10300_local_dcache_inv_range(start, end)
#define mn10300_local_dcache_flush_inv_range2(start, size) \
mn10300_local_dcache_inv_range2(start, size)
#define mn10300_dcache_flush() do {} while (0)
#define mn10300_dcache_flush_page(start) do {} while (0)
#define mn10300_dcache_flush_range(start, end) do {} while (0)
#define mn10300_dcache_flush_range2(start, size) do {} while (0)
#define mn10300_dcache_flush_inv() mn10300_dcache_inv()
#define mn10300_dcache_flush_inv_page(start) \
mn10300_dcache_inv_page((start))
#define mn10300_dcache_flush_inv_range(start, end) \
mn10300_dcache_inv_range((start), (end))
#define mn10300_dcache_flush_inv_range2(start, size) \
mn10300_dcache_inv_range2((start), (size))
#endif /* CONFIG_MN10300_CACHE_WBACK */
#else
#define mn10300_local_icache_inv() do {} while (0)
#define mn10300_local_icache_inv_page(start) do {} while (0)
#define mn10300_local_icache_inv_range(start, end) do {} while (0)
#define mn10300_local_icache_inv_range2(start, size) do {} while (0)
#define mn10300_local_dcache_inv() do {} while (0)
#define mn10300_local_dcache_inv_page(start) do {} while (0)
#define mn10300_local_dcache_inv_range(start, end) do {} while (0)
#define mn10300_local_dcache_inv_range2(start, size) do {} while (0)
#define mn10300_local_dcache_flush() do {} while (0)
#define mn10300_local_dcache_flush_inv_page(start) do {} while (0)
#define mn10300_local_dcache_flush_inv() do {} while (0)
#define mn10300_local_dcache_flush_inv_range(start, end)do {} while (0)
#define mn10300_local_dcache_flush_inv_range2(start, size) do {} while (0)
#define mn10300_local_dcache_flush_page(start) do {} while (0)
#define mn10300_local_dcache_flush_range(start, end) do {} while (0)
#define mn10300_local_dcache_flush_range2(start, size) do {} while (0)
#define mn10300_icache_inv() do {} while (0)
#define mn10300_icache_inv_page(start) do {} while (0)
#define mn10300_icache_inv_range(start, end) do {} while (0)
#define mn10300_icache_inv_range2(start, size) do {} while (0)
#define mn10300_dcache_inv() do {} while (0)
#define mn10300_dcache_inv_page(start) do {} while (0)
#define mn10300_dcache_inv_range(start, end) do {} while (0)
#define mn10300_dcache_inv_range2(start, size) do {} while (0)
#define mn10300_dcache_flush() do {} while (0)
#define mn10300_dcache_flush_inv_page(start) do {} while (0)
#define mn10300_dcache_flush_inv() do {} while (0)
#define mn10300_dcache_flush_inv_range(start, end) do {} while (0)
#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0)
#define mn10300_dcache_flush_page(start) do {} while (0)
#define mn10300_dcache_flush_range(start, end) do {} while (0)
#define mn10300_dcache_flush_range2(start, size) do {} while (0)
#endif /* CONFIG_MN10300_CACHE_ENABLED */
/*
* Virtually-indexed cache management (our cache is physically indexed)
*/
#define flush_cache_all() do {} while (0)
#define flush_cache_mm(mm) do {} while (0)
@ -32,20 +129,24 @@
#define flush_dcache_mmap_unlock(mapping) do {} while (0)
/*
* physically-indexed cache management
* Physically-indexed cache management
*/
#ifndef CONFIG_MN10300_CACHE_DISABLED
#if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE)
extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
extern void flush_icache_range(unsigned long start, unsigned long end);
#elif defined(CONFIG_MN10300_CACHE_INV_ICACHE)
static inline void flush_icache_page(struct vm_area_struct *vma,
struct page *page)
{
mn10300_icache_inv_page(page_to_phys(page));
}
extern void flush_icache_range(unsigned long start, unsigned long end);
extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
#else
#define flush_icache_range(start, end) do {} while (0)
#define flush_icache_page(vma, pg) do {} while (0)
#endif
#define flush_icache_user_range(vma, pg, adr, len) \
flush_icache_range(adr, adr + len)
@ -59,54 +160,7 @@ extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
memcpy(dst, src, len)
/*
* primitive routines
*/
#ifndef CONFIG_MN10300_CACHE_DISABLED
extern void mn10300_icache_inv(void);
extern void mn10300_dcache_inv(void);
extern void mn10300_dcache_inv_page(unsigned start);
extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
#ifdef CONFIG_MN10300_CACHE_WBACK
extern void mn10300_dcache_flush(void);
extern void mn10300_dcache_flush_page(unsigned start);
extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
extern void mn10300_dcache_flush_inv(void);
extern void mn10300_dcache_flush_inv_page(unsigned start);
extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
#else
#define mn10300_dcache_flush() do {} while (0)
#define mn10300_dcache_flush_page(start) do {} while (0)
#define mn10300_dcache_flush_range(start, end) do {} while (0)
#define mn10300_dcache_flush_range2(start, size) do {} while (0)
#define mn10300_dcache_flush_inv() mn10300_dcache_inv()
#define mn10300_dcache_flush_inv_page(start) \
mn10300_dcache_inv_page((start))
#define mn10300_dcache_flush_inv_range(start, end) \
mn10300_dcache_inv_range((start), (end))
#define mn10300_dcache_flush_inv_range2(start, size) \
mn10300_dcache_inv_range2((start), (size))
#endif /* CONFIG_MN10300_CACHE_WBACK */
#else
#define mn10300_icache_inv() do {} while (0)
#define mn10300_dcache_inv() do {} while (0)
#define mn10300_dcache_inv_page(start) do {} while (0)
#define mn10300_dcache_inv_range(start, end) do {} while (0)
#define mn10300_dcache_inv_range2(start, size) do {} while (0)
#define mn10300_dcache_flush() do {} while (0)
#define mn10300_dcache_flush_inv_page(start) do {} while (0)
#define mn10300_dcache_flush_inv() do {} while (0)
#define mn10300_dcache_flush_inv_range(start, end) do {} while (0)
#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0)
#define mn10300_dcache_flush_page(start) do {} while (0)
#define mn10300_dcache_flush_range(start, end) do {} while (0)
#define mn10300_dcache_flush_range2(start, size) do {} while (0)
#endif /* CONFIG_MN10300_CACHE_DISABLED */
/*
* internal debugging function
* Internal debugging function
*/
#ifdef CONFIG_DEBUG_PAGEALLOC
extern void kernel_map_pages(struct page *page, int numpages, int enable);

91
arch/mn10300/include/asm/cpu-regs.h
Просмотреть файл

@ -15,7 +15,6 @@
#include <linux/types.h>
#endif
#ifdef CONFIG_MN10300_CPU_AM33V2
/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
* the FP regs, but tell the assembler that we're actually allowed AM33v2
* instructions */
@ -24,7 +23,6 @@ asm(" .am33_2\n");
#else
.am33_2
#endif
#endif
#ifdef __KERNEL__
@ -58,6 +56,9 @@ asm(" .am33_2\n");
#define EPSW_nAR 0x00040000 /* register bank control */
#define EPSW_ML 0x00080000 /* monitor level */
#define EPSW_FE 0x00100000 /* FPU enable */
#define EPSW_IM_SHIFT 8 /* EPSW_IM_SHIFT determines the interrupt mode */
#define NUM2EPSW_IM(num) ((num) << EPSW_IM_SHIFT)
/* FPU registers */
#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */
@ -99,9 +100,11 @@ asm(" .am33_2\n");
#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */
#define CPUREV_TYPE 0x0000000f /* CPU type */
#define CPUREV_TYPE_S 0
#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */
#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */
#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */
#define CPUREV_TYPE_AM33_1 0x00000000 /* - AM33-1 core, AM33/1.00 arch */
#define CPUREV_TYPE_AM33_2 0x00000001 /* - AM33-2 core, AM33/2.00 arch */
#define CPUREV_TYPE_AM34_1 0x00000002 /* - AM34-1 core, AM33/2.00 arch */
#define CPUREV_TYPE_AM33_3 0x00000003 /* - AM33-3 core, AM33/2.00 arch */
#define CPUREV_TYPE_AM34_2 0x00000004 /* - AM34-2 core, AM33/3.00 arch */
#define CPUREV_REVISION 0x000000f0 /* CPU revision */
#define CPUREV_REVISION_S 4
#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */
@ -180,6 +183,21 @@ asm(" .am33_2\n");
#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */
#define CHCTR_DCWMD 0xf000 /* data cache way mode */
#ifdef CONFIG_AM34_2
#define ICIVCR __SYSREG(0xc0000c00, u32) /* icache area invalidate control */
#define ICIVCR_ICIVBSY 0x00000008 /* icache area invalidate busy */
#define ICIVCR_ICI 0x00000001 /* icache area invalidate */
#define ICIVMR __SYSREG(0xc0000c04, u32) /* icache area invalidate mask */
#define DCPGCR __SYSREG(0xc0000c10, u32) /* data cache area purge control */
#define DCPGCR_DCPGBSY 0x00000008 /* data cache area purge busy */
#define DCPGCR_DCP 0x00000002 /* data cache area purge */
#define DCPGCR_DCI 0x00000001 /* data cache area invalidate */
#define DCPGMR __SYSREG(0xc0000c14, u32) /* data cache area purge mask */
#endif /* CONFIG_AM34_2 */
/* MMU control registers */
#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */
#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */
@ -203,6 +221,9 @@ asm(" .am33_2\n");
#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */
#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */
#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */
#ifdef CONFIG_AM34_2
#define MMUCTR_WTE 0x80000000 /* write-through cache TLB entry bit enable */
#endif
#define PIDR __SYSREG(0xc0000094, u16) /* PID register */
#define PIDR_PID 0x00ff /* process identifier */
@ -231,14 +252,6 @@ asm(" .am33_2\n");
#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */
#define xPTEL_PPN 0xfffff006 /* physical page number */
#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */
#define xPTEL_UNUSED1_BIT 1
#define xPTEL_UNUSED2_BIT 2
#define xPTEL_C_BIT 3
#define xPTEL_PV_BIT 4
#define xPTEL_D_BIT 5
#define xPTEL_G_BIT 9
#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */
#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */
#define xPTEU_VPN 0xfffffc00 /* virtual page number */
@ -262,7 +275,16 @@ asm(" .am33_2\n");
#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */
#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */
#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */
#define xPTEL2_PPN 0xfffffc00 /* physical page number */
#define xPTEL2_CWT 0x00000400 /* cacheable write-through */
#define xPTEL2_UNUSED1 0x00000800 /* unused bit (broadcast mask) */
#define xPTEL2_PPN 0xfffff000 /* physical page number */
#define xPTEL2_V_BIT 0 /* bit numbers corresponding to above masks */
#define xPTEL2_C_BIT 1
#define xPTEL2_PV_BIT 2
#define xPTEL2_D_BIT 3
#define xPTEL2_G_BIT 7
#define xPTEL2_UNUSED1_BIT 11
#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */
#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */
@ -285,6 +307,47 @@ asm(" .am33_2\n");
#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */
#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */
#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
/* atomic operation registers */
#define AAR __SYSREG(0xc0000a00, u32) /* cacheable address */
#define AAR2 __SYSREG(0xc0000a04, u32) /* uncacheable address */
#define ADR __SYSREG(0xc0000a08, u32) /* data */
#define ASR __SYSREG(0xc0000a0c, u32) /* status */
#define AARU __SYSREG(0xd400aa00, u32) /* user address */
#define ADRU __SYSREG(0xd400aa08, u32) /* user data */
#define ASRU __SYSREG(0xd400aa0c, u32) /* user status */
#define ASR_RW 0x00000008 /* read */
#define ASR_BW 0x00000004 /* bus error */
#define ASR_IW 0x00000002 /* interrupt */
#define ASR_LW 0x00000001 /* bus lock */
#define ASRU_RW ASR_RW /* read */
#define ASRU_BW ASR_BW /* bus error */
#define ASRU_IW ASR_IW /* interrupt */
#define ASRU_LW ASR_LW /* bus lock */
/* in inline ASM, we stick the base pointer in to a reg and use offsets from
* it */
#define ATOMIC_OPS_BASE_ADDR 0xc0000a00
#ifndef __ASSEMBLY__
asm(
"_AAR = 0\n"
"_AAR2 = 4\n"
"_ADR = 8\n"
"_ASR = 12\n");
#else
#define _AAR 0
#define _AAR2 4
#define _ADR 8
#define _ASR 12
#endif
/* physical page address for userspace atomic operations registers */
#define USER_ATOMIC_OPS_PAGE_ADDR 0xd400a000
#endif /* CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT */
#endif /* __KERNEL__ */
#endif /* _ASM_CPU_REGS_H */

87
arch/mn10300/include/asm/dmactl-regs.h
Просмотреть файл

@ -11,91 +11,6 @@
#ifndef _ASM_DMACTL_REGS_H
#define _ASM_DMACTL_REGS_H
#include <asm/cpu-regs.h>
#ifdef __KERNEL__
/* DMA registers */
#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */
#define DMxCTR_BG 0x0000001f /* transfer request source */
#define DMxCTR_BG_SOFT 0x00000000 /* - software source */
#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */
#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */
#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */
#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */
#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */
#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */
#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */
#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */
#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */
#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */
#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */
#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */
#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */
#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */
#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */
#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */
#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */
#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */
#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */
#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */
#define DMxCTR_SAM_INCR 0x00000000 /* - increment */
#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */
#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */
#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */
#define DMxCTR_DAM_INCR 0x00000000 /* - increment */
#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */
#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */
#define DMxCTR_TM 0x00001800 /* DMA transfer mode */
#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */
#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */
#define DMxCTR_UT 0x00006000 /* DMA transfer unit */
#define DMxCTR_UT_1 0x00000000 /* - 1 byte */
#define DMxCTR_UT_2 0x00002000 /* - 2 byte */
#define DMxCTR_UT_4 0x00004000 /* - 4 byte */
#define DMxCTR_UT_16 0x00006000 /* - 16 byte */
#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */
#define DMxCTR_RQM 0x00060000 /* external request input source mode */
#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */
#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */
#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */
#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */
#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */
#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */
#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */
#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */
#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */
#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */
#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent
* size reg */
#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */
#define DM0IRQ 16 /* DMA channel 0 complete IRQ */
#define DM1IRQ 17 /* DMA channel 1 complete IRQ */
#define DM2IRQ 18 /* DMA channel 2 complete IRQ */
#define DM3IRQ 19 /* DMA channel 3 complete IRQ */
#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */
#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */
#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */
#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */
#ifndef __ASSEMBLY__
struct mn10300_dmactl_regs {
u32 ctr;
const void *src;
void *dst;
u32 siz;
u32 cyc;
} __attribute__((aligned(0x100)));
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#include <proc/dmactl-regs.h>
#endif /* _ASM_DMACTL_REGS_H */

12
arch/mn10300/include/asm/elf.h
Просмотреть файл

@ -31,6 +31,12 @@
#define R_MN10300_SYM_DIFF 33 /* Adjustment when relaxing. */
#define R_MN10300_ALIGN 34 /* Alignment requirement. */
/*
* AM33/AM34 HW Capabilities
*/
#define HWCAP_MN10300_ATOMIC_OP_UNIT 1 /* Has AM34 Atomic Operations */
/*
* ELF register definitions..
*/
@ -47,8 +53,6 @@ typedef struct {
u_int32_t fpcr;
} elf_fpregset_t;
extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
/*
* This is used to ensure we don't load something for the wrong architecture
*/
@ -130,7 +134,11 @@ do { \
* instruction set this CPU supports. This could be done in user space,
* but it's not easy, and we've already done it here.
*/
#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
#define ELF_HWCAP (HWCAP_MN10300_ATOMIC_OP_UNIT)
#else
#define ELF_HWCAP (0)
#endif
/*
* This yields a string that ld.so will use to load implementation

8
arch/mn10300/include/asm/exceptions.h
Просмотреть файл

@ -15,8 +15,8 @@
/*
* define the breakpoint instruction opcode to use
* - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
* (can use 0xF7)
* - note that the JTAG unit steals 0xFF, so you can't use JTAG and GDBSTUB at
* the same time.
*/
#define GDBSTUB_BKPT 0xFF
@ -90,7 +90,6 @@ enum exception_code {
extern void __set_intr_stub(enum exception_code code, void *handler);
extern void set_intr_stub(enum exception_code code, void *handler);
extern void set_jtag_stub(enum exception_code code, void *handler);
struct pt_regs;
@ -102,7 +101,6 @@ extern asmlinkage void dtlb_aerror(void);
extern asmlinkage void raw_bus_error(void);
extern asmlinkage void double_fault(void);
extern asmlinkage int system_call(struct pt_regs *);
extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
extern asmlinkage void uninitialised_exception(struct pt_regs *,
enum exception_code);
@ -116,6 +114,8 @@ extern void die(const char *, struct pt_regs *, enum exception_code)
extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
#define NUM2EXCEP_IRQ_LEVEL(num) (EXCEP_IRQ_LEVEL0 + (num) * 8)
#endif /* __ASSEMBLY__ */
#endif /* _ASM_EXCEPTIONS_H */

157
arch/mn10300/include/asm/fpu.h
Просмотреть файл

@ -12,74 +12,125 @@
#ifndef _ASM_FPU_H
#define _ASM_FPU_H
#include <asm/processor.h>
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <asm/exceptions.h>
#include <asm/sigcontext.h>
#include <asm/user.h>
#ifdef __KERNEL__
/* the task that owns the FPU state */
extern asmlinkage void fpu_disabled(void);
#ifdef CONFIG_FPU
#ifdef CONFIG_LAZY_SAVE_FPU
/* the task that currently owns the FPU state */
extern struct task_struct *fpu_state_owner;
#endif
#define set_using_fpu(tsk) \
do { \
(tsk)->thread.fpu_flags |= THREAD_USING_FPU; \
} while (0)
#if (THREAD_USING_FPU & ~0xff)
#error THREAD_USING_FPU must be smaller than 0x100.
#endif
#define clear_using_fpu(tsk) \
do { \
(tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \
} while (0)
static inline void set_using_fpu(struct task_struct *tsk)
{
asm volatile(
"bset %0,(0,%1)"
:
: "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags)
: "memory", "cc");
}
static inline void clear_using_fpu(struct task_struct *tsk)
{
asm volatile(
"bclr %0,(0,%1)"
:
: "i"(THREAD_USING_FPU), "a"(&tsk->thread.fpu_flags)
: "memory", "cc");
}
#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
#define unlazy_fpu(tsk) \
do { \
preempt_disable(); \
if (fpu_state_owner == (tsk)) \
fpu_save(&tsk->thread.fpu_state); \
preempt_enable(); \
} while (0)
#define exit_fpu() \
do { \
struct task_struct *__tsk = current; \
preempt_disable(); \
if (fpu_state_owner == __tsk) \
fpu_state_owner = NULL; \
preempt_enable(); \
} while (0)
#define flush_fpu() \
do { \
struct task_struct *__tsk = current; \
preempt_disable(); \
if (fpu_state_owner == __tsk) { \
fpu_state_owner = NULL; \
__tsk->thread.uregs->epsw &= ~EPSW_FE; \
} \
preempt_enable(); \
clear_using_fpu(__tsk); \
} while (0)
extern asmlinkage void fpu_init_state(void);
extern asmlinkage void fpu_kill_state(struct task_struct *);
extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
#ifdef CONFIG_FPU
extern asmlinkage void fpu_invalid_op(struct pt_regs *, enum exception_code);
extern asmlinkage void fpu_init_state(void);
extern asmlinkage void fpu_save(struct fpu_state_struct *);
extern asmlinkage void fpu_restore(struct fpu_state_struct *);
#else
#define fpu_save(a)
#define fpu_restore(a)
#endif /* CONFIG_FPU */
/*
* signal frame handlers
*/
extern int fpu_setup_sigcontext(struct fpucontext *buf);
extern int fpu_restore_sigcontext(struct fpucontext *buf);
static inline void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
#ifndef CONFIG_LAZY_SAVE_FPU
if (tsk->thread.fpu_flags & THREAD_HAS_FPU) {
fpu_save(&tsk->thread.fpu_state);
tsk->thread.fpu_flags &= ~THREAD_HAS_FPU;
tsk->thread.uregs->epsw &= ~EPSW_FE;
}
#else
if (fpu_state_owner == tsk)
fpu_save(&tsk->thread.fpu_state);
#endif
preempt_enable();
}
static inline void exit_fpu(void)
{
#ifdef CONFIG_LAZY_SAVE_FPU
struct task_struct *tsk = current;
preempt_disable();
if (fpu_state_owner == tsk)
fpu_state_owner = NULL;
preempt_enable();
#endif
}
static inline void flush_fpu(void)
{
struct task_struct *tsk = current;
preempt_disable();
#ifndef CONFIG_LAZY_SAVE_FPU
if (tsk->thread.fpu_flags & THREAD_HAS_FPU) {
tsk->thread.fpu_flags &= ~THREAD_HAS_FPU;
tsk->thread.uregs->epsw &= ~EPSW_FE;
}
#else
if (fpu_state_owner == tsk) {
fpu_state_owner = NULL;
tsk->thread.uregs->epsw &= ~EPSW_FE;
}
#endif
preempt_enable();
clear_using_fpu(tsk);
}
#else /* CONFIG_FPU */
extern asmlinkage
void unexpected_fpu_exception(struct pt_regs *, enum exception_code);
#define fpu_invalid_op unexpected_fpu_exception
#define fpu_exception unexpected_fpu_exception
struct task_struct;
struct fpu_state_struct;
static inline bool is_using_fpu(struct task_struct *tsk) { return false; }
static inline void set_using_fpu(struct task_struct *tsk) {}
static inline void clear_using_fpu(struct task_struct *tsk) {}
static inline void fpu_init_state(void) {}
static inline void fpu_save(struct fpu_state_struct *s) {}
static inline void fpu_kill_state(struct task_struct *tsk) {}
static inline void unlazy_fpu(struct task_struct *tsk) {}
static inline void exit_fpu(void) {}
static inline void flush_fpu(void) {}
static inline int fpu_setup_sigcontext(struct fpucontext *buf) { return 0; }
static inline int fpu_restore_sigcontext(struct fpucontext *buf) { return 0; }
#endif /* CONFIG_FPU */
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_FPU_H */

20
arch/mn10300/include/asm/frame.inc
Просмотреть файл

@ -18,6 +18,7 @@
#ifndef __ASM_OFFSETS_H__
#include <asm/asm-offsets.h>
#endif
#include <asm/thread_info.h>
#define pi break
@ -37,11 +38,15 @@
movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
mov sp,fp # FRAME pointer in A3
add -12,sp # allow for calls to be made
mov (__frame),a1
mov a1,(REG_NEXT,fp)
mov fp,(__frame)
and ~EPSW_FE,epsw # disable the FPU inside the kernel
# push the exception frame onto the front of the list
GET_THREAD_INFO a1
mov (TI_frame,a1),a0
mov a0,(REG_NEXT,fp)
mov fp,(TI_frame,a1)
# disable the FPU inside the kernel
and ~EPSW_FE,epsw
# we may be holding current in E2
#ifdef CONFIG_MN10300_CURRENT_IN_E2
@ -57,10 +62,11 @@
.macro RESTORE_ALL
# peel back the stack to the calling frame
# - this permits execve() to discard extra frames due to kernel syscalls
mov (__frame),fp
GET_THREAD_INFO a0
mov (TI_frame,a0),fp
mov fp,sp
mov (REG_NEXT,fp),d0 # userspace has regs->next == 0
mov d0,(__frame)
mov (REG_NEXT,fp),d0
mov d0,(TI_frame,a0) # userspace has regs->next == 0
#ifndef CONFIG_MN10300_USING_JTAG
mov (REG_EPSW,fp),d0

2
arch/mn10300/include/asm/gdb-stub.h
Просмотреть файл

@ -110,7 +110,7 @@ extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
extern asmlinkage void __gdbstub_bug_trap(void);
extern asmlinkage void __gdbstub_pause(void);
#ifndef CONFIG_MN10300_CACHE_DISABLED
#ifdef CONFIG_MN10300_CACHE_ENABLED
extern asmlinkage void gdbstub_purge_cache(void);
#else
#define gdbstub_purge_cache() do {} while (0)

3
arch/mn10300/include/asm/hardirq.h
Просмотреть файл

@ -19,9 +19,10 @@
/* assembly code in softirq.h is sensitive to the offsets of these fields */
typedef struct {
unsigned int __softirq_pending;
unsigned long idle_timestamp;
#ifdef CONFIG_MN10300_WD_TIMER
unsigned int __nmi_count; /* arch dependent */
unsigned int __irq_count; /* arch dependent */
#endif
} ____cacheline_aligned irq_cpustat_t;
#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */

4
arch/mn10300/include/asm/highmem.h
Просмотреть файл

@ -87,7 +87,7 @@ static inline unsigned long __kmap_atomic(struct page *page)
BUG();
#endif
set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
__flush_tlb_one(vaddr);
local_flush_tlb_one(vaddr);
return vaddr;
}
@ -116,7 +116,7 @@ static inline void __kunmap_atomic(unsigned long vaddr)
* this pte without first remap it
*/
pte_clear(kmap_pte - idx);
__flush_tlb_one(vaddr);
local_flush_tlb_one(vaddr);
}
#endif

37
arch/mn10300/include/asm/intctl-regs.h
Просмотреть файл

@ -15,24 +15,19 @@
#ifdef __KERNEL__
/* interrupt controller registers */
#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */
/*
* Interrupt controller registers
* - Registers 64-191 are at addresses offset from the main array
*/
#define GxICR(X) \
__SYSREG(0xd4000000 + (X) * 4 + \
(((X) >= 64) && ((X) < 192)) * 0xf00, u16)
#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */
#define IAGR_GN 0x00fc /* group number register
* (documentation _has_ to be wrong)
*/
#define GxICR_u8(X) \
__SYSREG(0xd4000000 + (X) * 4 + \
(((X) >= 64) && ((X) < 192)) * 0xf00, u8)
#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */
#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
#define SET_XIRQ_TRIGGER(X,Y) \
do { \
u16 x = EXTMD; \
x &= ~(3 << ((X) * 2)); \
x |= ((Y) & 3) << ((X) * 2); \
EXTMD = x; \
} while (0)
#include <proc/intctl-regs.h>
#define XIRQ_TRIGGER_LOWLEVEL 0
#define XIRQ_TRIGGER_HILEVEL 1
@ -59,10 +54,18 @@ do { \
#define GxICR_LEVEL_5 0x5000 /* - level 5 */
#define GxICR_LEVEL_6 0x6000 /* - level 6 */
#define GxICR_LEVEL_SHIFT 12
#define GxICR_NMI 0x8000 /* nmi request flag */
#define NUM2GxICR_LEVEL(num) ((num) << GxICR_LEVEL_SHIFT)
#ifndef __ASSEMBLY__
extern void set_intr_level(int irq, u16 level);
extern void set_intr_postackable(int irq);
extern void mn10300_intc_set_level(unsigned int irq, unsigned int level);
extern void mn10300_intc_clear(unsigned int irq);
extern void mn10300_intc_set(unsigned int irq);
extern void mn10300_intc_enable(unsigned int irq);
extern void mn10300_intc_disable(unsigned int irq);
extern void mn10300_set_lateack_irq_type(int irq);
#endif
/* external interrupts */

13
arch/mn10300/include/asm/io.h
Просмотреть файл

@ -206,6 +206,19 @@ static inline void outsl(unsigned long addr, const void *buffer, int count)
#define iowrite32_rep(p, src, count) \
outsl((unsigned long) (p), (src), (count))
#define readsb(p, dst, count) \
insb((unsigned long) (p), (dst), (count))
#define readsw(p, dst, count) \
insw((unsigned long) (p), (dst), (count))
#define readsl(p, dst, count) \
insl((unsigned long) (p), (dst), (count))
#define writesb(p, src, count) \
outsb((unsigned long) (p), (src), (count))
#define writesw(p, src, count) \
outsw((unsigned long) (p), (src), (count))
#define writesl(p, src, count) \
outsl((unsigned long) (p), (src), (count))
#define IO_SPACE_LIMIT 0xffffffff

12
arch/mn10300/include/asm/irq.h
Просмотреть файл

@ -21,8 +21,16 @@
/* this number is used when no interrupt has been assigned */
#define NO_IRQ INT_MAX
/* hardware irq numbers */
#define NR_IRQS GxICR_NUM_IRQS
/*
* hardware irq numbers
* - the ASB2364 has an FPGA with an IRQ multiplexer on it
*/
#ifdef CONFIG_MN10300_UNIT_ASB2364
#include <unit/irq.h>
#else
#define NR_CPU_IRQS GxICR_NUM_IRQS
#define NR_IRQS NR_CPU_IRQS
#endif
/* external hardware irq numbers */
#define NR_XIRQS GxICR_NUM_XIRQS

6
arch/mn10300/include/asm/irq_regs.h
Просмотреть файл

@ -18,7 +18,11 @@
#define ARCH_HAS_OWN_IRQ_REGS
#ifndef __ASSEMBLY__
#define get_irq_regs() (__frame)
static inline __attribute__((const))
struct pt_regs *get_irq_regs(void)
{
return current_frame();
}
#endif
#endif /* _ASM_IRQ_REGS_H */

111
arch/mn10300/include/asm/irqflags.h
Просмотреть файл

@ -13,6 +13,9 @@
#define _ASM_IRQFLAGS_H
#include <asm/cpu-regs.h>
#ifndef __ASSEMBLY__
#include <linux/smp.h>
#endif
/*
* interrupt control
@ -23,11 +26,7 @@
* - level 6 - timer interrupt
* - "enabled": run in IM7
*/
#ifdef CONFIG_MN10300_TTYSM
#define MN10300_CLI_LEVEL EPSW_IM_2
#else
#define MN10300_CLI_LEVEL EPSW_IM_1
#endif
#define MN10300_CLI_LEVEL (CONFIG_LINUX_CLI_LEVEL << EPSW_IM_SHIFT)
#ifndef __ASSEMBLY__
@ -64,11 +63,12 @@ static inline unsigned long arch_local_irq_save(void)
/*
* we make sure arch_irq_enable() doesn't cause priority inversion
*/
extern unsigned long __mn10300_irq_enabled_epsw;
extern unsigned long __mn10300_irq_enabled_epsw[];
static inline void arch_local_irq_enable(void)
{
unsigned long tmp;
int cpu = raw_smp_processor_id();
asm volatile(
" mov epsw,%0 \n"
@ -76,8 +76,8 @@ static inline void arch_local_irq_enable(void)
" or %2,%0 \n"
" mov %0,epsw \n"
: "=&d"(tmp)
: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw)
: "memory");
: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw[cpu])
: "memory", "cc");
}
static inline void arch_local_irq_restore(unsigned long flags)
@ -94,7 +94,7 @@ static inline void arch_local_irq_restore(unsigned long flags)
static inline bool arch_irqs_disabled_flags(unsigned long flags)
{
return (flags & EPSW_IM) <= MN10300_CLI_LEVEL;
return (flags & (EPSW_IE | EPSW_IM)) != (EPSW_IE | EPSW_IM_7);
}
static inline bool arch_irqs_disabled(void)
@ -109,6 +109,9 @@ static inline bool arch_irqs_disabled(void)
*/
static inline void arch_safe_halt(void)
{
#ifdef CONFIG_SMP
arch_local_irq_enable();
#else
asm volatile(
" or %0,epsw \n"
" nop \n"
@ -117,7 +120,97 @@ static inline void arch_safe_halt(void)
:
: "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)
: "cc");
#endif
}
#define __sleep_cpu() \
do { \
asm volatile( \
" bset %1,(%0)\n" \
"1: btst %1,(%0)\n" \
" bne 1b\n" \
: \
: "i"(&CPUM), "i"(CPUM_SLEEP) \
: "cc" \
); \
} while (0)
static inline void arch_local_cli(void)
{
asm volatile(
" and %0,epsw \n"
" nop \n"
" nop \n"
" nop \n"
:
: "i"(~EPSW_IE)
: "memory"
);
}
static inline unsigned long arch_local_cli_save(void)
{
unsigned long flags = arch_local_save_flags();
arch_local_cli();
return flags;
}
static inline void arch_local_sti(void)
{
asm volatile(
" or %0,epsw \n"
:
: "i"(EPSW_IE)
: "memory");
}
static inline void arch_local_change_intr_mask_level(unsigned long level)
{
asm volatile(
" and %0,epsw \n"
" or %1,epsw \n"
:
: "i"(~EPSW_IM), "i"(EPSW_IE | level)
: "cc", "memory");
}
#else /* !__ASSEMBLY__ */
#define LOCAL_SAVE_FLAGS(reg) \
mov epsw,reg
#define LOCAL_IRQ_DISABLE \
and ~EPSW_IM,epsw; \
or EPSW_IE|MN10300_CLI_LEVEL,epsw; \
nop; \
nop; \
nop
#define LOCAL_IRQ_ENABLE \
or EPSW_IE|EPSW_IM_7,epsw
#define LOCAL_IRQ_RESTORE(reg) \
mov reg,epsw
#define LOCAL_CLI_SAVE(reg) \
mov epsw,reg; \
and ~EPSW_IE,epsw; \
nop; \
nop; \
nop
#define LOCAL_CLI \
and ~EPSW_IE,epsw; \
nop; \
nop; \
nop
#define LOCAL_STI \
or EPSW_IE,epsw
#define LOCAL_CHANGE_INTR_MASK_LEVEL(level) \
and ~EPSW_IM,epsw; \
or EPSW_IE|(level),epsw
#endif /* __ASSEMBLY__ */
#endif /* _ASM_IRQFLAGS_H */

75
arch/mn10300/include/asm/mmu_context.h
Просмотреть файл

@ -27,28 +27,38 @@
#include <asm/tlbflush.h>
#include <asm-generic/mm_hooks.h>
#define MMU_CONTEXT_TLBPID_NR 256
#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL
#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL
#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL
#define MMU_NO_CONTEXT 0x00000000UL
extern unsigned long mmu_context_cache[NR_CPUS];
#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()])
#define MMU_CONTEXT_TLBPID_LOCK_NR 0
#define enter_lazy_tlb(mm, tsk) do {} while (0)
static inline void cpu_ran_vm(int cpu, struct mm_struct *mm)
{
#ifdef CONFIG_SMP
#define cpu_ran_vm(cpu, mm) \
cpumask_set_cpu((cpu), mm_cpumask(mm))
#define cpu_maybe_ran_vm(cpu, mm) \
cpumask_test_and_set_cpu((cpu), mm_cpumask(mm))
#else
#define cpu_ran_vm(cpu, mm) do {} while (0)
#define cpu_maybe_ran_vm(cpu, mm) true
#endif /* CONFIG_SMP */
cpumask_set_cpu(cpu, mm_cpumask(mm));
#endif
}
/*
* allocate an MMU context
static inline bool cpu_maybe_ran_vm(int cpu, struct mm_struct *mm)
{
#ifdef CONFIG_SMP
return cpumask_test_and_set_cpu(cpu, mm_cpumask(mm));
#else
return true;
#endif
}
#ifdef CONFIG_MN10300_TLB_USE_PIDR
extern unsigned long mmu_context_cache[NR_CPUS];
#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()])
/**
* allocate_mmu_context - Allocate storage for the arch-specific MMU data
* @mm: The userspace VM context being set up
*/
static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
{
@ -58,7 +68,7 @@ static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
/* we exhausted the TLB PIDs of this version on this CPU, so we
* flush this CPU's TLB in its entirety and start new cycle */
flush_tlb_all();
local_flush_tlb_all();
/* fix the TLB version if needed (we avoid version #0 so as to
* distingush MMU_NO_CONTEXT) */
@ -100,23 +110,35 @@ static inline int init_new_context(struct task_struct *tsk,
return 0;
}
/*
* destroy context related info for an mm_struct that is about to be put to
* rest
*/
#define destroy_context(mm) do { } while (0)
/*
* after we have set current->mm to a new value, this activates the context for
* the new mm so we see the new mappings.
*/
static inline void activate_context(struct mm_struct *mm, int cpu)
static inline void activate_context(struct mm_struct *mm)
{
PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
}
#else /* CONFIG_MN10300_TLB_USE_PIDR */
/*
* change between virtual memory sets
#define init_new_context(tsk, mm) (0)
#define activate_context(mm) local_flush_tlb()
#endif /* CONFIG_MN10300_TLB_USE_PIDR */
/**
* destroy_context - Destroy mm context information
* @mm: The MM being destroyed.
*
* Destroy context related info for an mm_struct that is about to be put to
* rest
*/
#define destroy_context(mm) do {} while (0)
/**
* switch_mm - Change between userspace virtual memory contexts
* @prev: The outgoing MM context.
* @next: The incoming MM context.
* @tsk: The incoming task.
*/
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
@ -124,11 +146,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
int cpu = smp_processor_id();
if (prev != next) {
#ifdef CONFIG_SMP
per_cpu(cpu_tlbstate, cpu).active_mm = next;
#endif
cpu_ran_vm(cpu, next);
activate_context(next, cpu);
PTBR = (unsigned long) next->pgd;
} else if (!cpu_maybe_ran_vm(cpu, next)) {
activate_context(next, cpu);
activate_context(next);
}
}

1
arch/mn10300/include/asm/pgalloc.h
Просмотреть файл

@ -11,7 +11,6 @@
#ifndef _ASM_PGALLOC_H
#define _ASM_PGALLOC_H
#include <asm/processor.h>
#include <asm/page.h>
#include <linux/threads.h>
#include <linux/mm.h> /* for struct page */

82
arch/mn10300/include/asm/pgtable.h
Просмотреть файл

@ -90,46 +90,58 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
* The vmalloc() routines also leaves a hole of 4kB between each vmalloced
* area to catch addressing errors.
*/
#ifndef __ASSEMBLY__
#define VMALLOC_OFFSET (8UL * 1024 * 1024)
#define VMALLOC_START (0x70000000UL)
#define VMALLOC_END (0x7C000000UL)
#else
#define VMALLOC_OFFSET (8 * 1024 * 1024)
#define VMALLOC_START (0x70000000)
#define VMALLOC_END (0x7C000000)
#endif
#ifndef __ASSEMBLY__
extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
#endif
/* IPTEL/DPTEL bit assignments */
#define _PAGE_BIT_VALID xPTEL_V_BIT
#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */
#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */
#define _PAGE_BIT_CACHE xPTEL_C_BIT
#define _PAGE_BIT_PRESENT xPTEL_PV_BIT
#define _PAGE_BIT_DIRTY xPTEL_D_BIT
#define _PAGE_BIT_GLOBAL xPTEL_G_BIT
/* IPTEL2/DPTEL2 bit assignments */
#define _PAGE_BIT_VALID xPTEL2_V_BIT
#define _PAGE_BIT_CACHE xPTEL2_C_BIT
#define _PAGE_BIT_PRESENT xPTEL2_PV_BIT
#define _PAGE_BIT_DIRTY xPTEL2_D_BIT
#define _PAGE_BIT_GLOBAL xPTEL2_G_BIT
#define _PAGE_BIT_ACCESSED xPTEL2_UNUSED1_BIT /* mustn't be loaded into IPTEL2/DPTEL2 */
#define _PAGE_VALID xPTEL_V
#define _PAGE_ACCESSED xPTEL_UNUSED1
#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */
#define _PAGE_CACHE xPTEL_C
#define _PAGE_PRESENT xPTEL_PV
#define _PAGE_DIRTY xPTEL_D
#define _PAGE_PROT xPTEL_PR
#define _PAGE_PROT_RKNU xPTEL_PR_ROK
#define _PAGE_PROT_WKNU xPTEL_PR_RWK
#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU
#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU
#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU
#define _PAGE_GLOBAL xPTEL_G
#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */
#define _PAGE_VALID xPTEL2_V
#define _PAGE_CACHE xPTEL2_C
#define _PAGE_PRESENT xPTEL2_PV
#define _PAGE_DIRTY xPTEL2_D
#define _PAGE_PROT xPTEL2_PR
#define _PAGE_PROT_RKNU xPTEL2_PR_ROK
#define _PAGE_PROT_WKNU xPTEL2_PR_RWK
#define _PAGE_PROT_RKRU xPTEL2_PR_ROK_ROU
#define _PAGE_PROT_WKRU xPTEL2_PR_RWK_ROU
#define _PAGE_PROT_WKWU xPTEL2_PR_RWK_RWU
#define _PAGE_GLOBAL xPTEL2_G
#define _PAGE_PS_MASK xPTEL2_PS
#define _PAGE_PS_4Kb xPTEL2_PS_4Kb
#define _PAGE_PS_128Kb xPTEL2_PS_128Kb
#define _PAGE_PS_1Kb xPTEL2_PS_1Kb
#define _PAGE_PS_4Mb xPTEL2_PS_4Mb
#define _PAGE_PSE xPTEL2_PS_4Mb /* 4MB page */
#define _PAGE_CACHE_WT xPTEL2_CWT
#define _PAGE_ACCESSED xPTEL2_UNUSED1
#define _PAGE_NX 0 /* no-execute bit */
#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */
/* If _PAGE_VALID is clear, we use these: */
#define _PAGE_FILE xPTEL2_C /* set:pagecache unset:swap */
#define _PAGE_PROTNONE 0x000 /* If not present */
#define __PAGE_PROT_UWAUX 0x040
#define __PAGE_PROT_USER 0x080
#define __PAGE_PROT_WRITE 0x100
#define __PAGE_PROT_UWAUX 0x010
#define __PAGE_PROT_USER 0x020
#define __PAGE_PROT_WRITE 0x040
#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID)
#define _PAGE_PROTNONE 0x000 /* If not present */
#ifndef __ASSEMBLY__
@ -170,6 +182,9 @@ extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE)
#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
#define __PAGE_USERIO (__PAGE_KERNEL_BASE | _PAGE_PROT_WKWU | _PAGE_NX)
#define PAGE_USERIO __pgprot(__PAGE_USERIO)
/*
* Whilst the MN10300 can do page protection for execute (given separate data
* and insn TLBs), we are not supporting it at the moment. Write permission,
@ -323,11 +338,7 @@ static inline int pte_exec_kernel(pte_t pte)
return 1;
}
/*
* Bits 0 and 1 are taken, split up the 29 bits of offset
* into this range:
*/
#define PTE_FILE_MAX_BITS 29
#define PTE_FILE_MAX_BITS 30
#define pte_to_pgoff(pte) (pte_val(pte) >> 2)
#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE)
@ -373,8 +384,13 @@ static inline void ptep_mkdirty(pte_t *ptep)
* Macro to mark a page protection value as "uncacheable". On processors which
* do not support it, this is a no-op.
*/
#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE)
#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHE)
/*
* Macro to mark a page protection value as "Write-Through".
* On processors which do not support it, this is a no-op.
*/
#define pgprot_through(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE_WT)
/*
* Conversion functions: convert a page and protection to a page entry,

66
arch/mn10300/include/asm/processor.h
Просмотреть файл

@ -13,10 +13,13 @@
#ifndef _ASM_PROCESSOR_H
#define _ASM_PROCESSOR_H
#include <linux/threads.h>
#include <linux/thread_info.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/cpu-regs.h>
#include <linux/threads.h>
#include <asm/uaccess.h>
#include <asm/current.h>
/* Forward declaration, a strange C thing */
struct task_struct;
@ -33,6 +36,8 @@ struct mm_struct;
__pc; \
})
extern void get_mem_info(unsigned long *mem_base, unsigned long *mem_size);
extern void show_registers(struct pt_regs *regs);
/*
@ -43,17 +48,22 @@ extern void show_registers(struct pt_regs *regs);
struct mn10300_cpuinfo {
int type;
unsigned long loops_per_sec;
unsigned long loops_per_jiffy;
char hard_math;
unsigned long *pgd_quick;
unsigned long *pte_quick;
unsigned long pgtable_cache_sz;
};
extern struct mn10300_cpuinfo boot_cpu_data;
#ifdef CONFIG_SMP
#if CONFIG_NR_CPUS < 2 || CONFIG_NR_CPUS > 8
# error Sorry, NR_CPUS should be 2 to 8
#endif
extern struct mn10300_cpuinfo cpu_data[];
#define current_cpu_data cpu_data[smp_processor_id()]
#else /* CONFIG_SMP */
#define cpu_data &boot_cpu_data
#define current_cpu_data boot_cpu_data
#endif /* CONFIG_SMP */
extern void identify_cpu(struct mn10300_cpuinfo *);
extern void print_cpu_info(struct mn10300_cpuinfo *);
@ -76,10 +86,6 @@ extern void dodgy_tsc(void);
*/
#define TASK_UNMAPPED_BASE 0x30000000
typedef struct {
unsigned long seg;
} mm_segment_t;
struct fpu_state_struct {
unsigned long fs[32]; /* fpu registers */
unsigned long fpcr; /* fpu control register */
@ -92,20 +98,19 @@ struct thread_struct {
unsigned long a3; /* kernel FP */
unsigned long wchan;
unsigned long usp;
struct pt_regs *__frame;
unsigned long fpu_flags;
#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */
#define THREAD_HAS_FPU 0x00000002 /* T if this task owns the FPU right now */
struct fpu_state_struct fpu_state;
};
#define INIT_THREAD \
{ \
.uregs = init_uregs, \
.pc = 0, \
.sp = 0, \
.a3 = 0, \
.wchan = 0, \
.__frame = NULL, \
#define INIT_THREAD \
{ \
.uregs = init_uregs, \
.pc = 0, \
.sp = 0, \
.a3 = 0, \
.wchan = 0, \
}
#define INIT_MMAP \
@ -117,13 +122,20 @@ struct thread_struct {
* - need to discard the frame stacked by the kernel thread invoking the execve
* syscall (see RESTORE_ALL macro)
*/
#define start_thread(regs, new_pc, new_sp) do { \
set_fs(USER_DS); \
__frame = current->thread.uregs; \
__frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \
__frame->pc = new_pc; \
__frame->sp = new_sp; \
} while (0)
static inline void start_thread(struct pt_regs *regs,
unsigned long new_pc, unsigned long new_sp)
{
struct thread_info *ti = current_thread_info();
struct pt_regs *frame0;
set_fs(USER_DS);
frame0 = thread_info_to_uregs(ti);
frame0->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;
frame0->pc = new_pc;
frame0->sp = new_sp;
ti->frame = frame0;
}
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
@ -157,7 +169,7 @@ unsigned long get_wchan(struct task_struct *p);
static inline void prefetch(const void *x)
{
#ifndef CONFIG_MN10300_CACHE_DISABLED
#ifdef CONFIG_MN10300_CACHE_ENABLED
#ifdef CONFIG_MN10300_PROC_MN103E010
asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
#else
@ -168,7 +180,7 @@ static inline void prefetch(const void *x)
static inline void prefetchw(const void *x)
{
#ifndef CONFIG_MN10300_CACHE_DISABLED
#ifdef CONFIG_MN10300_CACHE_ENABLED
#ifdef CONFIG_MN10300_PROC_MN103E010
asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
#else

13
arch/mn10300/include/asm/ptrace.h
Просмотреть файл

@ -40,7 +40,6 @@
#define PT_PC 26
#define NR_PTREGS 27
#ifndef __ASSEMBLY__
/*
* This defines the way registers are stored in the event of an exception
* - the strange order is due to the MOVM instruction
@ -75,7 +74,6 @@ struct pt_regs {
unsigned long epsw;
unsigned long pc;
};
#endif
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
#define PTRACE_GETREGS 12
@ -86,12 +84,7 @@ struct pt_regs {
/* options set using PTRACE_SETOPTIONS */
#define PTRACE_O_TRACESYSGOOD 0x00000001
#if defined(__KERNEL__)
extern struct pt_regs *__frame; /* current frame pointer */
#if !defined(__ASSEMBLY__)
struct task_struct;
#ifdef __KERNEL__
#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
#define instruction_pointer(regs) ((regs)->pc)
@ -100,9 +93,7 @@ extern void show_regs(struct pt_regs *);
#define arch_has_single_step() (1)
#endif /* !__ASSEMBLY */
#define profile_pc(regs) ((regs)->pc)
#endif /* __KERNEL__ */
#endif /* __KERNEL__ */
#endif /* _ASM_PTRACE_H */

2
arch/mn10300/include/asm/reset-regs.h
Просмотреть файл

@ -50,7 +50,7 @@ static inline void mn10300_proc_hard_reset(void)
RSTCTR |= RSTCTR_CHIPRST;
}
extern unsigned int watchdog_alert_counter;
extern unsigned int watchdog_alert_counter[];
extern void watchdog_go(void);
extern asmlinkage void watchdog_handler(void);

11
arch/mn10300/include/asm/rtc.h
Просмотреть файл

@ -15,25 +15,14 @@
#include <linux/init.h>
extern void check_rtc_time(void);
extern void __init calibrate_clock(void);
extern unsigned long __init get_initial_rtc_time(void);
#else /* !CONFIG_MN10300_RTC */
static inline void check_rtc_time(void)
{
}
static inline void calibrate_clock(void)
{
}
static inline unsigned long get_initial_rtc_time(void)
{
return 0;
}
#endif /* !CONFIG_MN10300_RTC */
#include <asm-generic/rtc.h>

125
arch/mn10300/include/asm/rwlock.h Normal file
Просмотреть файл

@ -0,0 +1,125 @@
/*
* Helpers used by both rw spinlocks and rw semaphores.
*
* Based in part on code from semaphore.h and
* spinlock.h Copyright 1996 Linus Torvalds.
*
* Copyright 1999 Red Hat, Inc.
*
* Written by Benjamin LaHaise.
*
* Modified by Matsushita Electric Industrial Co., Ltd.
* Modifications:
* 13-Nov-2006 MEI Temporarily delete lock functions for SMP support.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#ifndef _ASM_RWLOCK_H
#define _ASM_RWLOCK_H
#define RW_LOCK_BIAS 0x01000000
#ifndef CONFIG_SMP
typedef struct { unsigned long a[100]; } __dummy_lock_t;
#define __dummy_lock(lock) (*(__dummy_lock_t *)(lock))
#define RW_LOCK_BIAS_STR "0x01000000"
#define __build_read_lock_ptr(rw, helper) \
do { \
asm volatile( \
" mov (%0),d3 \n" \
" sub 1,d3 \n" \
" mov d3,(%0) \n" \
" blt 1f \n" \
" bra 2f \n" \
"1: jmp 3f \n" \
"2: \n" \
" .section .text.lock,\"ax\" \n" \
"3: call "helper"[],0 \n" \
" jmp 2b \n" \
" .previous" \
: \
: "d" (rw) \
: "memory", "d3", "cc"); \
} while (0)
#define __build_read_lock_const(rw, helper) \
do { \
asm volatile( \
" mov (%0),d3 \n" \
" sub 1,d3 \n" \
" mov d3,(%0) \n" \
" blt 1f \n" \
" bra 2f \n" \
"1: jmp 3f \n" \
"2: \n" \
" .section .text.lock,\"ax\" \n" \
"3: call "helper"[],0 \n" \
" jmp 2b \n" \
" .previous" \
: \
: "d" (rw) \
: "memory", "d3", "cc"); \
} while (0)
#define __build_read_lock(rw, helper) \
do { \
if (__builtin_constant_p(rw)) \
__build_read_lock_const(rw, helper); \
else \
__build_read_lock_ptr(rw, helper); \
} while (0)
#define __build_write_lock_ptr(rw, helper) \
do { \
asm volatile( \
" mov (%0),d3 \n" \
" sub 1,d3 \n" \
" mov d3,(%0) \n" \
" blt 1f \n" \
" bra 2f \n" \
"1: jmp 3f \n" \
"2: \n" \
" .section .text.lock,\"ax\" \n" \
"3: call "helper"[],0 \n" \
" jmp 2b \n" \
" .previous" \
: \
: "d" (rw) \
: "memory", "d3", "cc"); \
} while (0)
#define __build_write_lock_const(rw, helper) \
do { \
asm volatile( \
" mov (%0),d3 \n" \
" sub 1,d3 \n" \
" mov d3,(%0) \n" \
" blt 1f \n" \
" bra 2f \n" \
"1: jmp 3f \n" \
"2: \n" \
" .section .text.lock,\"ax\" \n" \
"3: call "helper"[],0 \n" \
" jmp 2b \n" \
" .previous" \
: \
: "d" (rw) \
: "memory", "d3", "cc"); \
} while (0)
#define __build_write_lock(rw, helper) \
do { \
if (__builtin_constant_p(rw)) \
__build_write_lock_const(rw, helper); \
else \
__build_write_lock_ptr(rw, helper); \
} while (0)
#endif /* CONFIG_SMP */
#endif /* _ASM_RWLOCK_H */

53
arch/mn10300/include/asm/serial-regs.h
Просмотреть файл

@ -20,18 +20,25 @@
/* serial port 0 */
#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */
#define SC01CTR_CK 0x0007 /* clock source select */
#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */
#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */
#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */
#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */
#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 1 only) */
#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 0 underflow (serial port 0 only) */
#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
#define SC1CTR_CK_TM12UFLOW_8 0x0000 /* - 1/8 timer 12 underflow (serial port 1 only) */
#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
#define SC01CTR_STB 0x0008 /* stop bit select */
#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */
#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */
@ -100,11 +107,23 @@
/* serial port 2 */
#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */
#ifdef CONFIG_AM33_2
#define SC2CTR_CK 0x0003 /* clock source select */
#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */
#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */
#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */
#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */
#else /* CONFIG_AM33_2 */
#define SC2CTR_CK 0x0007 /* clock source select */
#define SC2CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow */
#define SC2CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
#define SC2CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
#define SC2CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow */
#define SC2CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 1 underflow */
#define SC2CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow */
#define SC2CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
#define SC2CTR_CK_EXTERN 0x0007 /* - external closk */
#endif /* CONFIG_AM33_2 */
#define SC2CTR_STB 0x0008 /* stop bit select */
#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */
#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */
@ -134,9 +153,14 @@
#define SC2ICR_RES 0x04 /* receive error select */
#define SC2ICR_RI 0x01 /* receive interrupt cause */
#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */
#define SC2TXB __SYSREG(0xd4002028, u8) /* transmit buffer reg */
#define SC2RXB __SYSREG(0xd4002029, u8) /* receive buffer reg */
#ifdef CONFIG_AM33_2
#define SC2STR __SYSREG(0xd400202c, u8) /* status reg */
#else /* CONFIG_AM33_2 */
#define SC2STR __SYSREG(0xd400202c, u16) /* status reg */
#endif /* CONFIG_AM33_2 */
#define SC2STR_OEF 0x0001 /* overrun error found */
#define SC2STR_PEF 0x0002 /* parity error found */
#define SC2STR_FEF 0x0004 /* framing error found */
@ -146,10 +170,17 @@
#define SC2STR_RXF 0x0040 /* receive status */
#define SC2STR_TXF 0x0080 /* transmit status */
#ifdef CONFIG_AM33_2
#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */
#endif
#ifdef CONFIG_AM33_2
#define SC2RXIRQ 24 /* serial 2 Receive IRQ */
#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */
#else /* CONFIG_AM33_2 */
#define SC2RXIRQ 68 /* serial 2 Receive IRQ */
#define SC2TXIRQ 69 /* serial 2 Transmit IRQ */
#endif /* CONFIG_AM33_2 */
#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */

8
arch/mn10300/include/asm/serial.h
Просмотреть файл

@ -9,10 +9,8 @@
* 2 of the Licence, or (at your option) any later version.
*/
/*
* The ASB2305 has an 18.432 MHz clock the UART
*/
#define BASE_BAUD (18432000 / 16)
#ifndef _ASM_SERIAL_H
#define _ASM_SERIAL_H
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_DETECT_IRQ
@ -34,3 +32,5 @@
#endif
#include <unit/serial.h>
#endif /* _ASM_SERIAL_H */

91
arch/mn10300/include/asm/smp.h
Просмотреть файл

@ -3,6 +3,16 @@
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* Modified by Matsushita Electric Industrial Co., Ltd.
* Modifications:
* 13-Nov-2006 MEI Define IPI-IRQ number and add inline/macro function
* for SMP support.
* 22-Jan-2007 MEI Add the define related to SMP_BOOT_IRQ.
* 23-Feb-2007 MEI Add the define related to SMP icahce invalidate.
* 23-Jun-2008 MEI Delete INTC_IPI.
* 22-Jul-2008 MEI Add smp_nmi_call_function and related defines.
* 04-Aug-2008 MEI Delete USE_DOIRQ_CACHE_IPI.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
@ -11,8 +21,85 @@
#ifndef _ASM_SMP_H
#define _ASM_SMP_H
#ifdef CONFIG_SMP
#error SMP not yet supported for MN10300
#ifndef __ASSEMBLY__
#include <linux/threads.h>
#include <linux/cpumask.h>
#endif
#ifdef CONFIG_SMP
#include <proc/smp-regs.h>
#define RESCHEDULE_IPI 63
#define CALL_FUNC_SINGLE_IPI 192
#define LOCAL_TIMER_IPI 193
#define FLUSH_CACHE_IPI 194
#define CALL_FUNCTION_NMI_IPI 195
#define GDB_NMI_IPI 196
#define SMP_BOOT_IRQ 195
#define RESCHEDULE_GxICR_LV GxICR_LEVEL_6
#define CALL_FUNCTION_GxICR_LV GxICR_LEVEL_4
#define LOCAL_TIMER_GxICR_LV GxICR_LEVEL_4
#define FLUSH_CACHE_GxICR_LV GxICR_LEVEL_0
#define SMP_BOOT_GxICR_LV GxICR_LEVEL_0
#define TIME_OUT_COUNT_BOOT_IPI 100
#define DELAY_TIME_BOOT_IPI 75000
#ifndef __ASSEMBLY__
/**
* raw_smp_processor_id - Determine the raw CPU ID of the CPU running it
*
* What we really want to do is to use the CPUID hardware CPU register to get
* this information, but accesses to that aren't cached, and run at system bus
* speed, not CPU speed. A copy of this value is, however, stored in the
* thread_info struct, and that can be cached.
*
* An alternate way of dealing with this could be to use the EPSW.S bits to
* cache this information for systems with up to four CPUs.
*/
#if 0
#define raw_smp_processor_id() (CPUID)
#else
#define raw_smp_processor_id() (current_thread_info()->cpu)
#endif
static inline int cpu_logical_map(int cpu)
{
return cpu;
}
static inline int cpu_number_map(int cpu)
{
return cpu;
}
extern cpumask_t cpu_boot_map;
extern void smp_init_cpus(void);
extern void smp_cache_interrupt(void);
extern void send_IPI_allbutself(int irq);
extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait);
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#ifdef CONFIG_HOTPLUG_CPU
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
#endif /* CONFIG_HOTPLUG_CPU */
#endif /* __ASSEMBLY__ */
#else /* CONFIG_SMP */
#ifndef __ASSEMBLY__
static inline void smp_init_cpus(void) {}
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_SMP */
#endif /* _ASM_SMP_H */

1
arch/mn10300/include/asm/smsc911x.h Normal file
Просмотреть файл

@ -0,0 +1 @@
#include <unit/smsc911x.h>

179
arch/mn10300/include/asm/spinlock.h
Просмотреть файл

@ -11,6 +11,183 @@
#ifndef _ASM_SPINLOCK_H
#define _ASM_SPINLOCK_H
#error SMP spinlocks not implemented for MN10300
#include <asm/atomic.h>
#include <asm/rwlock.h>
#include <asm/page.h>
/*
* Simple spin lock operations. There are two variants, one clears IRQ's
* on the local processor, one does not.
*
* We make no fairness assumptions. They have a cost.
*/
#define arch_spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) != 0)
#define arch_spin_unlock_wait(x) do { barrier(); } while (arch_spin_is_locked(x))
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
asm volatile(
" bclr 1,(0,%0) \n"
:
: "a"(&lock->slock)
: "memory", "cc");
}
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
int ret;
asm volatile(
" mov 1,%0 \n"
" bset %0,(%1) \n"
" bne 1f \n"
" clr %0 \n"
"1: xor 1,%0 \n"
: "=d"(ret)
: "a"(&lock->slock)
: "memory", "cc");
return ret;
}
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
asm volatile(
"1: bset 1,(0,%0) \n"
" bne 1b \n"
:
: "a"(&lock->slock)
: "memory", "cc");
}
static inline void arch_spin_lock_flags(arch_spinlock_t *lock,
unsigned long flags)
{
int temp;
asm volatile(
"1: bset 1,(0,%2) \n"
" beq 3f \n"
" mov %1,epsw \n"
"2: mov (0,%2),%0 \n"
" or %0,%0 \n"
" bne 2b \n"
" mov %3,%0 \n"
" mov %0,epsw \n"
" nop \n"
" nop \n"
" bra 1b\n"
"3: \n"
: "=&d" (temp)
: "d" (flags), "a"(&lock->slock), "i"(EPSW_IE | MN10300_CLI_LEVEL)
: "memory", "cc");
}
#ifdef __KERNEL__
/*
* Read-write spinlocks, allowing multiple readers
* but only one writer.
*
* NOTE! it is quite common to have readers in interrupts
* but no interrupt writers. For those circumstances we
* can "mix" irq-safe locks - any writer needs to get a
* irq-safe write-lock, but readers can get non-irqsafe
* read-locks.
*/
/**
* read_can_lock - would read_trylock() succeed?
* @lock: the rwlock in question.
*/
#define arch_read_can_lock(x) ((int)(x)->lock > 0)
/**
* write_can_lock - would write_trylock() succeed?
* @lock: the rwlock in question.
*/
#define arch_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
/*
* On mn10300, we implement read-write locks as a 32-bit counter
* with the high bit (sign) being the "contended" bit.
*/
static inline void arch_read_lock(arch_rwlock_t *rw)
{
#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
__build_read_lock(rw, "__read_lock_failed");
#else
{
atomic_t *count = (atomic_t *)rw;
while (atomic_dec_return(count) < 0)
atomic_inc(count);
}
#endif
}
static inline void arch_write_lock(arch_rwlock_t *rw)
{
#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
__build_write_lock(rw, "__write_lock_failed");
#else
{
atomic_t *count = (atomic_t *)rw;
while (!atomic_sub_and_test(RW_LOCK_BIAS, count))
atomic_add(RW_LOCK_BIAS, count);
}
#endif
}
static inline void arch_read_unlock(arch_rwlock_t *rw)
{
#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
__build_read_unlock(rw);
#else
{
atomic_t *count = (atomic_t *)rw;
atomic_inc(count);
}
#endif
}
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
#if 0 //def CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
__build_write_unlock(rw);
#else
{
atomic_t *count = (atomic_t *)rw;
atomic_add(RW_LOCK_BIAS, count);
}
#endif
}
static inline int arch_read_trylock(arch_rwlock_t *lock)
{
atomic_t *count = (atomic_t *)lock;
atomic_dec(count);
if (atomic_read(count) >= 0)
return 1;
atomic_inc(count);
return 0;
}
static inline int arch_write_trylock(arch_rwlock_t *lock)
{
atomic_t *count = (atomic_t *)lock;
if (atomic_sub_and_test(RW_LOCK_BIAS, count))
return 1;
atomic_add(RW_LOCK_BIAS, count);
return 0;
}
#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
#define _raw_spin_relax(lock) cpu_relax()
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
#endif /* __KERNEL__ */
#endif /* _ASM_SPINLOCK_H */

20
arch/mn10300/include/asm/spinlock_types.h Normal file
Просмотреть файл

@ -0,0 +1,20 @@
#ifndef _ASM_SPINLOCK_TYPES_H
#define _ASM_SPINLOCK_TYPES_H
#ifndef __LINUX_SPINLOCK_TYPES_H
# error "please don't include this file directly"
#endif
typedef struct arch_spinlock {
unsigned int slock;
} arch_spinlock_t;
#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
typedef struct {
unsigned int lock;
} arch_rwlock_t;
#define __ARCH_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
#endif /* _ASM_SPINLOCK_TYPES_H */

73
arch/mn10300/include/asm/system.h
Просмотреть файл

@ -12,12 +12,29 @@
#define _ASM_SYSTEM_H
#include <asm/cpu-regs.h>
#include <asm/intctl-regs.h>
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <linux/irqflags.h>
#include <asm/atomic.h>
#if !defined(CONFIG_LAZY_SAVE_FPU)
struct fpu_state_struct;
extern asmlinkage void fpu_save(struct fpu_state_struct *);
#define switch_fpu(prev, next) \
do { \
if ((prev)->thread.fpu_flags & THREAD_HAS_FPU) { \
(prev)->thread.fpu_flags &= ~THREAD_HAS_FPU; \
(prev)->thread.uregs->epsw &= ~EPSW_FE; \
fpu_save(&(prev)->thread.fpu_state); \
} \
} while (0)
#else
#define switch_fpu(prev, next) do {} while (0)
#endif
struct task_struct;
struct thread_struct;
@ -30,6 +47,7 @@ struct task_struct *__switch_to(struct thread_struct *prev,
/* context switching is now performed out-of-line in switch_to.S */
#define switch_to(prev, next, last) \
do { \
switch_fpu(prev, next); \
current->thread.wchan = (u_long) __builtin_return_address(0); \
(last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
mb(); \
@ -40,8 +58,6 @@ do { \
#define nop() asm volatile ("nop")
#endif /* !__ASSEMBLY__ */
/*
* Force strict CPU ordering.
* And yes, this is required on UP too when we're talking
@ -68,64 +84,19 @@ do { \
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#else
#define set_mb(var, value) do { xchg(&var, value); } while (0)
#else /* CONFIG_SMP */
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#endif
#define set_mb(var, value) do { var = value; mb(); } while (0)
#endif /* CONFIG_SMP */
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
#define read_barrier_depends() do {} while (0)
#define smp_read_barrier_depends() do {} while (0)
/*****************************************************************************/
/*
* MN10300 doesn't actually have an exchange instruction
*/
#ifndef __ASSEMBLY__
struct __xchg_dummy { unsigned long a[100]; };
#define __xg(x) ((struct __xchg_dummy *)(x))
static inline
unsigned long __xchg(volatile unsigned long *m, unsigned long val)
{
unsigned long retval;
unsigned long flags;
local_irq_save(flags);
retval = *m;
*m = val;
local_irq_restore(flags);
return retval;
}
#define xchg(ptr, v) \
((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \
(unsigned long)(v)))
static inline unsigned long __cmpxchg(volatile unsigned long *m,
unsigned long old, unsigned long new)
{
unsigned long retval;
unsigned long flags;
local_irq_save(flags);
retval = *m;
if (retval == old)
*m = new;
local_irq_restore(flags);
return retval;
}
#define cmpxchg(ptr, o, n) \
((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
(unsigned long)(o), \
(unsigned long)(n)))
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_SYSTEM_H */

18
arch/mn10300/include/asm/thread_info.h
Просмотреть файл

@ -16,10 +16,6 @@
#include <asm/page.h>
#ifndef __ASSEMBLY__
#include <asm/processor.h>
#endif
#define PREEMPT_ACTIVE 0x10000000
#ifdef CONFIG_4KSTACKS
@ -38,10 +34,14 @@
* must also be changed
*/
#ifndef __ASSEMBLY__
typedef struct {
unsigned long seg;
} mm_segment_t;
struct thread_info {
struct task_struct *task; /* main task structure */
struct exec_domain *exec_domain; /* execution domain */
struct pt_regs *frame; /* current exception frame */
unsigned long flags; /* low level flags */
__u32 cpu; /* current CPU */
__s32 preempt_count; /* 0 => preemptable, <0 => BUG */
@ -55,6 +55,10 @@ struct thread_info {
__u8 supervisor_stack[0];
};
#define thread_info_to_uregs(ti) \
((struct pt_regs *) \
((unsigned long)ti + THREAD_SIZE - sizeof(struct pt_regs)))
#else /* !__ASSEMBLY__ */
#ifndef __ASM_OFFSETS_H__
@ -102,6 +106,12 @@ struct thread_info *current_thread_info(void)
return ti;
}
static inline __attribute__((const))
struct pt_regs *current_frame(void)
{
return current_thread_info()->frame;
}
/* how to get the current stack pointer from C */
static inline unsigned long current_stack_pointer(void)
{

189
arch/mn10300/include/asm/timer-regs.h
Просмотреть файл

@ -17,21 +17,27 @@
#ifdef __KERNEL__
/* timer prescalar control */
/*
* Timer prescalar control
*/
#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */
#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */
#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */
/* 8 bit timers */
/*
* 8-bit timers
*/
#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */
#define TM0MD_SRC 0x07 /* timer source */
#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */
#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */
#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */
#endif /* CONFIG_AM33_2 */
#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -43,7 +49,9 @@
#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */
#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */
#endif /* CONFIG_AM33_2 */
#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -55,7 +63,9 @@
#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */
#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#if defined(CONFIG_AM33_2)
#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */
#endif /* CONFIG_AM33_2 */
#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -64,11 +74,13 @@
#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */
#define TM3MD_SRC_TM2CASCADE 0x03 /* - cascade with timer 2 */
#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */
#endif /* CONFIG_AM33_2 */
#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -96,7 +108,9 @@
#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */
#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */
/* 16-bit timers 4,5 & 7-11 */
/*
* 16-bit timers 4,5 & 7-15
*/
#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */
#define TM4MD_SRC 0x07 /* timer source */
#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */
@ -105,7 +119,9 @@
#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */
#endif /* CONFIG_AM33_2 */
#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -118,7 +134,11 @@
#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */
#else /* !CONFIG_AM33_2 */
#define TM5MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#endif /* CONFIG_AM33_2 */
#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -130,7 +150,9 @@
#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */
#endif /* CONFIG_AM33_2 */
#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -143,7 +165,11 @@
#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */
#else /* !CONFIG_AM33_2 */
#define TM8MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#endif /* CONFIG_AM33_2 */
#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -156,7 +182,11 @@
#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */
#else /* !CONFIG_AM33_2 */
#define TM9MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#endif /* CONFIG_AM33_2 */
#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -169,7 +199,11 @@
#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */
#else /* !CONFIG_AM33_2 */
#define TM10MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#endif /* CONFIG_AM33_2 */
#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */
@ -178,32 +212,101 @@
#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */
#else /* !CONFIG_AM33_2 */
#define TM11MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#endif /* CONFIG_AM33_2 */
#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */
#if defined(CONFIG_AM34_2)
#define TM12MD __SYSREG(0xd4003180, u8) /* timer 11 mode register */
#define TM12MD_SRC 0x07 /* timer source */
#define TM12MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM12MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM12MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
#define TM12MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM12MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM12MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#define TM12MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#define TM12MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM12MD_COUNT_ENABLE 0x80 /* timer count enable */
#define TM13MD __SYSREG(0xd4003182, u8) /* timer 11 mode register */
#define TM13MD_SRC 0x07 /* timer source */
#define TM13MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM13MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM13MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
#define TM13MD_SRC_TM12CASCADE 0x03 /* - cascade with timer 12 */
#define TM13MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM13MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM13MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#define TM13MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#define TM13MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM13MD_COUNT_ENABLE 0x80 /* timer count enable */
#define TM14MD __SYSREG(0xd4003184, u8) /* timer 11 mode register */
#define TM14MD_SRC 0x07 /* timer source */
#define TM14MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM14MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM14MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
#define TM14MD_SRC_TM13CASCADE 0x03 /* - cascade with timer 13 */
#define TM14MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM14MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM14MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#define TM14MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#define TM14MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM14MD_COUNT_ENABLE 0x80 /* timer count enable */
#define TM15MD __SYSREG(0xd4003186, u8) /* timer 11 mode register */
#define TM15MD_SRC 0x07 /* timer source */
#define TM15MD_SRC_IOCLK 0x00 /* - IOCLK */
#define TM15MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
#define TM15MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
#define TM15MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
#define TM15MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
#define TM15MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
#define TM15MD_SRC_TM7UFLOW 0x07 /* - timer 7 underflow */
#define TM15MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
#define TM15MD_COUNT_ENABLE 0x80 /* timer count enable */
#endif /* CONFIG_AM34_2 */
#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */
#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */
#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */
#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */
#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */
#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */
#define TM89BR __SYSREG(0xd4003098, u32) /* timer 8:9 base register */
#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */
#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */
#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */
#if defined(CONFIG_AM34_2)
#define TM12BR __SYSREG(0xd4003190, u16) /* timer 12 base register */
#define TM13BR __SYSREG(0xd4003192, u16) /* timer 13 base register */
#define TM14BR __SYSREG(0xd4003194, u16) /* timer 14 base register */
#define TM15BR __SYSREG(0xd4003196, u16) /* timer 15 base register */
#endif /* CONFIG_AM34_2 */
#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */
#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */
#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */
#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */
#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */
#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */
#define TM89BC __SYSREG(0xd40030a8, u32) /* timer 8:9 binary counter */
#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */
#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */
#if defined(CONFIG_AM34_2)
#define TM12BC __SYSREG(0xd40031a0, u16) /* timer 12 binary counter */
#define TM13BC __SYSREG(0xd40031a2, u16) /* timer 13 binary counter */
#define TM14BC __SYSREG(0xd40031a4, u16) /* timer 14 binary counter */
#define TM15BC __SYSREG(0xd40031a6, u16) /* timer 15 binary counter */
#endif /* CONFIG_AM34_2 */
#define TM4IRQ 6 /* timer 4 IRQ */
#define TM5IRQ 7 /* timer 5 IRQ */
@ -212,6 +315,12 @@
#define TM9IRQ 13 /* timer 9 IRQ */
#define TM10IRQ 14 /* timer 10 IRQ */
#define TM11IRQ 15 /* timer 11 IRQ */
#if defined(CONFIG_AM34_2)
#define TM12IRQ 64 /* timer 12 IRQ */
#define TM13IRQ 65 /* timer 13 IRQ */
#define TM14IRQ 66 /* timer 14 IRQ */
#define TM15IRQ 67 /* timer 15 IRQ */
#endif /* CONFIG_AM34_2 */
#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */
#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */
@ -220,8 +329,16 @@
#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */
#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */
#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */
#if defined(CONFIG_AM34_2)
#define TM12ICR GxICR(TM12IRQ) /* timer 12 uflow intr ctrl reg */
#define TM13ICR GxICR(TM13IRQ) /* timer 13 uflow intr ctrl reg */
#define TM14ICR GxICR(TM14IRQ) /* timer 14 uflow intr ctrl reg */
#define TM15ICR GxICR(TM15IRQ) /* timer 15 uflow intr ctrl reg */
#endif /* CONFIG_AM34_2 */
/* 16-bit timer 6 */
/*
* 16-bit timer 6
*/
#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */
#define TM6MD_SRC 0x0007 /* timer source */
#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */
@ -229,10 +346,14 @@
#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */
#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */
#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */
#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */
#define TM6MD_SRC_TM2UFLOW 0x0006 /* - timer 2 underflow */
#if defined(CONFIG_AM33_2)
/* #define TM6MD_SRC_TM6IOB_BOTH 0x0006 */ /* - TM6IOB pin input (both edges) */
#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */
#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */
#endif /* CONFIG_AM33_2 */
#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */
#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */
#if defined(CONFIG_AM33_2)
#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */
#define TM6MD_PWM 0x3800 /* PWM output mode */
#define TM6MD_PWM_DIS 0x0000 /* - disabled */
@ -240,10 +361,15 @@
#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */
#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */
#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */
#endif /* CONFIG_AM33_2 */
#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */
#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */
#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */
#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
#if defined(CONFIG_AM33_2)
#define TM6MDA_OUT 0x07 /* output select */
#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */
#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */
@ -251,30 +377,35 @@
#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */
#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */
#define TM6MDA_MODE 0xc0 /* compare A register mode */
#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
#define TM6MDA_EDGE 0x20 /* compare A edge select */
#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */
#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */
#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */
#else /* !CONFIG_AM33_2 */
#define TM6MDA_MODE 0x40 /* compare A register mode */
#endif /* CONFIG_AM33_2 */
#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */
#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
#if defined(CONFIG_AM33_2)
#define TM6MDB_OUT 0x07 /* output select */
#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */
#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */
#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */
#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */
#define TM6MDB_MODE 0xc0 /* compare B register mode */
#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
#define TM6MDB_EDGE 0x20 /* compare B edge select */
#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */
#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */
#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */
#else /* !CONFIG_AM33_2 */
#define TM6MDB_MODE 0x40 /* compare B register mode */
#endif /* CONFIG_AM33_2 */
#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */
#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */
@ -288,6 +419,34 @@
#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */
#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */
#if defined(CONFIG_AM34_2)
/*
* MTM: OS Tick-Timer
*/
#define TMTMD __SYSREG(0xd4004100, u8) /* Tick Timer mode register */
#define TMTMD_TMTLDE 0x40 /* initialize TMTBC = TMTBR */
#define TMTMD_TMTCNE 0x80 /* timer count enable */
#define TMTBR __SYSREG(0xd4004110, u32) /* Tick Timer mode reg */
#define TMTBC __SYSREG(0xd4004120, u32) /* Tick Timer mode reg */
/*
* MTM: OS Timestamp-Timer
*/
#define TMSMD __SYSREG(0xd4004140, u8) /* Tick Timer mode register */
#define TMSMD_TMSLDE 0x40 /* initialize TMSBC = TMSBR */
#define TMSMD_TMSCNE 0x80 /* timer count enable */
#define TMSBR __SYSREG(0xd4004150, u32) /* Tick Timer mode register */
#define TMSBC __SYSREG(0xd4004160, u32) /* Tick Timer mode register */
#define TMTIRQ 119 /* OS Tick timer IRQ */
#define TMSIRQ 120 /* Timestamp timer IRQ */
#define TMTICR GxICR(TMTIRQ) /* OS Tick timer uflow intr ctrl reg */
#define TMSICR GxICR(TMSIRQ) /* Timestamp timer uflow intr ctrl reg */
#endif /* CONFIG_AM34_2 */
#endif /* __KERNEL__ */
#endif /* _ASM_TIMER_REGS_H */

20
arch/mn10300/include/asm/timex.h
Просмотреть файл

@ -16,18 +16,30 @@
#define TICK_SIZE (tick_nsec / 1000)
#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
* to something appropriate, but what? */
extern cycles_t cacheflush_time;
#define CLOCK_TICK_RATE MN10300_JCCLK /* Underlying HZ */
#ifdef __KERNEL__
extern cycles_t cacheflush_time;
static inline cycles_t get_cycles(void)
{
return read_timestamp_counter();
}
extern int init_clockevents(void);
extern int init_clocksource(void);
static inline void setup_jiffies_interrupt(int irq,
struct irqaction *action)
{
u16 tmp;
setup_irq(irq, action);
set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
tmp = GxICR(irq);
}
#endif /* __KERNEL__ */
#endif /* _ASM_TIMEX_H */

162
arch/mn10300/include/asm/tlbflush.h
Просмотреть файл

@ -11,24 +11,78 @@
#ifndef _ASM_TLBFLUSH_H
#define _ASM_TLBFLUSH_H
#include <linux/mm.h>
#include <asm/processor.h>
#define __flush_tlb() \
do { \
int w; \
__asm__ __volatile__ \
(" mov %1,%0 \n" \
" or %2,%0 \n" \
" mov %0,%1 \n" \
: "=d"(w) \
: "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \
: "cc", "memory" \
); \
} while (0)
struct tlb_state {
struct mm_struct *active_mm;
int state;
};
DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
#define __flush_tlb_all() __flush_tlb()
#define __flush_tlb_one(addr) __flush_tlb()
/**
* local_flush_tlb - Flush the current MM's entries from the local CPU's TLBs
*/
static inline void local_flush_tlb(void)
{
int w;
asm volatile(
" mov %1,%0 \n"
" or %2,%0 \n"
" mov %0,%1 \n"
: "=d"(w)
: "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV)
: "cc", "memory");
}
/**
* local_flush_tlb_all - Flush all entries from the local CPU's TLBs
*/
static inline void local_flush_tlb_all(void)
{
local_flush_tlb();
}
/**
* local_flush_tlb_one - Flush one entry from the local CPU's TLBs
*/
static inline void local_flush_tlb_one(unsigned long addr)
{
local_flush_tlb();
}
/**
* local_flush_tlb_page - Flush a page's entry from the local CPU's TLBs
* @mm: The MM to flush for
* @addr: The address of the target page in RAM (not its page struct)
*/
static inline
void local_flush_tlb_page(struct mm_struct *mm, unsigned long addr)
{
unsigned long pteu, flags, cnx;
addr &= PAGE_MASK;
local_irq_save(flags);
cnx = 1;
#ifdef CONFIG_MN10300_TLB_USE_PIDR
cnx = mm->context.tlbpid[smp_processor_id()];
#endif
if (cnx) {
pteu = addr;
#ifdef CONFIG_MN10300_TLB_USE_PIDR
pteu |= cnx & xPTEU_PID;
#endif
IPTEU = pteu;
DPTEU = pteu;
if (IPTEL & xPTEL_V)
IPTEL = 0;
if (DPTEL & xPTEL_V)
DPTEL = 0;
}
local_irq_restore(flags);
}
/*
* TLB flushing:
@ -40,41 +94,61 @@ do { \
* - flush_tlb_range(mm, start, end) flushes a range of pages
* - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
*/
#define flush_tlb_all() \
do { \
preempt_disable(); \
__flush_tlb_all(); \
preempt_enable(); \
} while (0)
#ifdef CONFIG_SMP
#define flush_tlb_mm(mm) \
do { \
preempt_disable(); \
__flush_tlb_all(); \
preempt_enable(); \
} while (0)
#include <asm/smp.h>
#define flush_tlb_range(vma, start, end) \
do { \
unsigned long __s __attribute__((unused)) = (start); \
unsigned long __e __attribute__((unused)) = (end); \
preempt_disable(); \
__flush_tlb_all(); \
preempt_enable(); \
} while (0)
extern void flush_tlb_all(void);
extern void flush_tlb_current_task(void);
extern void flush_tlb_mm(struct mm_struct *);
extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
#define flush_tlb() flush_tlb_current_task()
#define __flush_tlb_global() flush_tlb_all()
#define flush_tlb() flush_tlb_all()
#define flush_tlb_kernel_range(start, end) \
do { \
unsigned long __s __attribute__((unused)) = (start); \
unsigned long __e __attribute__((unused)) = (end); \
flush_tlb_all(); \
} while (0)
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
flush_tlb_mm(vma->vm_mm);
}
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
#else /* CONFIG_SMP */
#define flush_tlb_pgtables(mm, start, end) do {} while (0)
static inline void flush_tlb_all(void)
{
preempt_disable();
local_flush_tlb_all();
preempt_enable();
}
static inline void flush_tlb_mm(struct mm_struct *mm)
{
preempt_disable();
local_flush_tlb_all();
preempt_enable();
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
preempt_disable();
local_flush_tlb_all();
preempt_enable();
}
#define flush_tlb_page(vma, addr) local_flush_tlb_page((vma)->vm_mm, addr)
#define flush_tlb() flush_tlb_all()
#endif /* CONFIG_SMP */
static inline void flush_tlb_kernel_range(unsigned long start,
unsigned long end)
{
flush_tlb_all();
}
static inline void flush_tlb_pgtables(struct mm_struct *mm,
unsigned long start, unsigned long end)
{
}
#endif /* _ASM_TLBFLUSH_H */

6
arch/mn10300/include/asm/uaccess.h
Просмотреть файл

@ -14,9 +14,8 @@
/*
* User space memory access functions
*/
#include <linux/sched.h>
#include <linux/thread_info.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/errno.h>
#define VERIFY_READ 0
@ -29,7 +28,6 @@
*
* For historical reasons, these macros are grossly misnamed.
*/
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF)
@ -377,7 +375,7 @@ unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
#if 0
#error don't use - these macros don't increment to & from pointers
#error "don't use - these macros don't increment to & from pointers"
/* Optimize just a little bit when we know the size of the move. */
#define __constant_copy_user(to, from, size) \
do { \

15
arch/mn10300/kernel/Makefile
Просмотреть файл

@ -3,21 +3,24 @@
#
extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o signal.o entry.o fpu.o traps.o irq.o \
fpu-obj-y := fpu-nofpu.o fpu-nofpu-low.o
fpu-obj-$(CONFIG_FPU) := fpu.o fpu-low.o
obj-y := process.o signal.o entry.o traps.o irq.o \
ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
switch_to.o mn10300_ksyms.o kernel_execve.o
switch_to.o mn10300_ksyms.o kernel_execve.o $(fpu-obj-y)
obj-$(CONFIG_SMP) += smp.o smp-low.o
obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o
obj-$(CONFIG_FPU) += fpu-low.o
obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \
mn10300-debug.o
obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y)
obj-$(CONFIG_GDBSTUB) += gdb-cache.o
endif
@ -25,3 +28,5 @@ obj-$(CONFIG_MN10300_RTC) += rtc.o
obj-$(CONFIG_PROFILE) += profile.o profile-low.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_CSRC_MN10300) += csrc-mn10300.o
obj-$(CONFIG_CEVT_MN10300) += cevt-mn10300.o

11
arch/mn10300/kernel/asm-offsets.c
Просмотреть файл

@ -23,6 +23,7 @@ void foo(void)
OFFSET(TI_task, thread_info, task);
OFFSET(TI_exec_domain, thread_info, exec_domain);
OFFSET(TI_frame, thread_info, frame);
OFFSET(TI_flags, thread_info, flags);
OFFSET(TI_cpu, thread_info, cpu);
OFFSET(TI_preempt_count, thread_info, preempt_count);
@ -66,7 +67,15 @@ void foo(void)
OFFSET(THREAD_SP, thread_struct, sp);
OFFSET(THREAD_A3, thread_struct, a3);
OFFSET(THREAD_USP, thread_struct, usp);
OFFSET(THREAD_FRAME, thread_struct, __frame);
#ifdef CONFIG_FPU
OFFSET(THREAD_FPU_FLAGS, thread_struct, fpu_flags);
OFFSET(THREAD_FPU_STATE, thread_struct, fpu_state);
DEFINE(__THREAD_USING_FPU, THREAD_USING_FPU);
DEFINE(__THREAD_HAS_FPU, THREAD_HAS_FPU);
#endif /* CONFIG_FPU */
BLANK();
OFFSET(TASK_THREAD, task_struct, thread);
BLANK();
DEFINE(CLONE_VM_asm, CLONE_VM);

131
arch/mn10300/kernel/cevt-mn10300.c Normal file
Просмотреть файл

@ -0,0 +1,131 @@
/* MN10300 clockevents
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by Mark Salter (msalter@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/smp.h>
#include <asm/timex.h>
#include "internal.h"
#ifdef CONFIG_SMP
#if (CONFIG_NR_CPUS > 2) && !defined(CONFIG_GEENERIC_CLOCKEVENTS_BROADCAST)
#error "This doesn't scale well! Need per-core local timers."
#endif
#else /* CONFIG_SMP */
#define stop_jiffies_counter1()
#define reload_jiffies_counter1(x)
#define TMJC1IRQ TMJCIRQ
#endif
static int next_event(unsigned long delta,
struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
if (cpu == 0) {
stop_jiffies_counter();
reload_jiffies_counter(delta - 1);
} else {
stop_jiffies_counter1();
reload_jiffies_counter1(delta - 1);
}
return 0;
}
static void set_clock_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
/* Nothing to do ... */
}
static DEFINE_PER_CPU(struct clock_event_device, mn10300_clockevent_device);
static DEFINE_PER_CPU(struct irqaction, timer_irq);
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *cd;
unsigned int cpu = smp_processor_id();
if (cpu == 0)
stop_jiffies_counter();
else
stop_jiffies_counter1();
cd = &per_cpu(mn10300_clockevent_device, cpu);
cd->event_handler(cd);
return IRQ_HANDLED;
}
static void event_handler(struct clock_event_device *dev)
{
}
int __init init_clockevents(void)
{
struct clock_event_device *cd;
struct irqaction *iact;
unsigned int cpu = smp_processor_id();
cd = &per_cpu(mn10300_clockevent_device, cpu);
if (cpu == 0) {
stop_jiffies_counter();
cd->irq = TMJCIRQ;
} else {
stop_jiffies_counter1();
cd->irq = TMJC1IRQ;
}
cd->name = "Timestamp";
cd->features = CLOCK_EVT_FEAT_ONESHOT;
/* Calculate the min / max delta */
clockevent_set_clock(cd, MN10300_JCCLK);
cd->max_delta_ns = clockevent_delta2ns(TMJCBR_MAX, cd);
cd->min_delta_ns = clockevent_delta2ns(100, cd);
cd->rating = 200;
cd->cpumask = cpumask_of(smp_processor_id());
cd->set_mode = set_clock_mode;
cd->event_handler = event_handler;
cd->set_next_event = next_event;
iact = &per_cpu(timer_irq, cpu);
iact->flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER;
iact->handler = timer_interrupt;
clockevents_register_device(cd);
#if defined(CONFIG_SMP) && !defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
/* setup timer irq affinity so it only runs on this cpu */
{
struct irq_desc *desc;
desc = irq_to_desc(cd->irq);
cpumask_copy(desc->affinity, cpumask_of(cpu));
iact->flags |= IRQF_NOBALANCING;
}
#endif
if (cpu == 0) {
reload_jiffies_counter(MN10300_JC_PER_HZ - 1);
iact->name = "CPU0 Timer";
} else {
reload_jiffies_counter1(MN10300_JC_PER_HZ - 1);
iact->name = "CPU1 Timer";
}
setup_jiffies_interrupt(cd->irq, iact);
return 0;
}

35
arch/mn10300/kernel/csrc-mn10300.c Normal file
Просмотреть файл

@ -0,0 +1,35 @@
/* MN10300 clocksource
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by Mark Salter (msalter@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/clocksource.h>
#include <linux/init.h>
#include <asm/timex.h>
#include "internal.h"
static cycle_t mn10300_read(struct clocksource *cs)
{
return read_timestamp_counter();
}
static struct clocksource clocksource_mn10300 = {
.name = "TSC",
.rating = 200,
.read = mn10300_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
int __init init_clocksource(void)
{
startup_timestamp_counter();
clocksource_set_clock(&clocksource_mn10300, MN10300_TSCCLK);
clocksource_register(&clocksource_mn10300);
return 0;
}

146
arch/mn10300/kernel/entry.S
Просмотреть файл

@ -28,25 +28,17 @@
#include <asm/asm-offsets.h>
#include <asm/frame.inc>
#if defined(CONFIG_SMP) && defined(CONFIG_GDBSTUB)
#include <asm/gdb-stub.h>
#endif /* CONFIG_SMP && CONFIG_GDBSTUB */
#ifdef CONFIG_PREEMPT
#define preempt_stop __cli
#define preempt_stop LOCAL_IRQ_DISABLE
#else
#define preempt_stop
#define resume_kernel restore_all
#endif
.macro __cli
and ~EPSW_IM,epsw
or EPSW_IE|MN10300_CLI_LEVEL,epsw
nop
nop
nop
.endm
.macro __sti
or EPSW_IE|EPSW_IM_7,epsw
.endm
.am33_2
###############################################################################
@ -88,7 +80,7 @@ syscall_call:
syscall_exit:
# make sure we don't miss an interrupt setting need_resched or
# sigpending between sampling and the rti
__cli
LOCAL_IRQ_DISABLE
mov (TI_flags,a2),d2
btst _TIF_ALLWORK_MASK,d2
bne syscall_exit_work
@ -105,7 +97,7 @@ restore_all:
syscall_exit_work:
btst _TIF_SYSCALL_TRACE,d2
beq work_pending
__sti # could let syscall_trace_exit() call
LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call
# schedule() instead
mov fp,d0
call syscall_trace_exit[],0 # do_syscall_trace(regs)
@ -121,7 +113,7 @@ work_resched:
# make sure we don't miss an interrupt setting need_resched or
# sigpending between sampling and the rti
__cli
LOCAL_IRQ_DISABLE
# is there any work to be done other than syscall tracing?
mov (TI_flags,a2),d2
@ -168,7 +160,7 @@ ret_from_intr:
ENTRY(resume_userspace)
# make sure we don't miss an interrupt setting need_resched or
# sigpending between sampling and the rti
__cli
LOCAL_IRQ_DISABLE
# is there any work to be done on int/exception return?
mov (TI_flags,a2),d2
@ -178,7 +170,7 @@ ENTRY(resume_userspace)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
__cli
LOCAL_IRQ_DISABLE
mov (TI_preempt_count,a2),d0 # non-zero preempt_count ?
cmp 0,d0
bne restore_all
@ -214,31 +206,6 @@ ENTRY(irq_handler)
jmp ret_from_intr
###############################################################################
#
# Monitor Signal handler entry point
#
###############################################################################
ENTRY(monitor_signal)
movbu (0xae000001),d1
cmp 1,d1
beq monsignal
ret [],0
monsignal:
or EPSW_NMID,epsw
mov d0,a0
mov a0,sp
mov (REG_EPSW,fp),d1
and ~EPSW_nSL,d1
mov d1,(REG_EPSW,fp)
movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
mov (sp),a1
mov a1,usp
movm (sp),[other]
add 4,sp
here: jmp 0x8e000008-here+0x8e000008
###############################################################################
#
# Double Fault handler entry point
@ -276,6 +243,10 @@ double_fault_loop:
ENTRY(raw_bus_error)
add -4,sp
mov d0,(sp)
#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
mov (MMUCTR),d0
mov d0,(MMUCTR)
#endif
mov (BCBERR),d0 # what
btst BCBERR_BEMR_DMA,d0 # see if it was an external bus error
beq __common_exception_aux # it wasn't
@ -302,11 +273,88 @@ ENTRY(nmi_handler)
add -4,sp
mov d0,(sp)
mov (TBR),d0
#ifdef CONFIG_SMP
add -4,sp
mov d0,(sp) # save d0(TBR)
movhu (NMIAGR),d0
and NMIAGR_GN,d0
lsr 0x2,d0
cmp CALL_FUNCTION_NMI_IPI,d0
bne 5f # if not call function, jump
# function call nmi ipi
add 4,sp # no need to store TBR
mov GxICR_DETECT,d0 # clear NMI request
movbu d0,(GxICR(CALL_FUNCTION_NMI_IPI))
movhu (GxICR(CALL_FUNCTION_NMI_IPI)),d0
and ~EPSW_NMID,epsw # enable NMI
mov (sp),d0 # restore d0
SAVE_ALL
call smp_nmi_call_function_interrupt[],0
RESTORE_ALL
5:
#ifdef CONFIG_GDBSTUB
cmp GDB_NMI_IPI,d0
bne 3f # if not gdb nmi ipi, jump
# gdb nmi ipi
add 4,sp # no need to store TBR
mov GxICR_DETECT,d0 # clear NMI
movbu d0,(GxICR(GDB_NMI_IPI))
movhu (GxICR(GDB_NMI_IPI)),d0
and ~EPSW_NMID,epsw # enable NMI
#ifdef CONFIG_MN10300_CACHE_ENABLED
mov (gdbstub_nmi_opr_type),d0
cmp GDBSTUB_NMI_CACHE_PURGE,d0
bne 4f # if not gdb cache purge, jump
# gdb cache purge nmi ipi
add -20,sp
mov d1,(4,sp)
mov a0,(8,sp)
mov a1,(12,sp)
mov mdr,d0
mov d0,(16,sp)
call gdbstub_local_purge_cache[],0
mov 0x1,d0
mov (CPUID),d1
asl d1,d0
mov gdbstub_nmi_cpumask,a0
bclr d0,(a0)
mov (4,sp),d1
mov (8,sp),a0
mov (12,sp),a1
mov (16,sp),d0
mov d0,mdr
add 20,sp
mov (sp),d0
add 4,sp
rti
4:
#endif /* CONFIG_MN10300_CACHE_ENABLED */
# gdb wait nmi ipi
mov (sp),d0
SAVE_ALL
call gdbstub_nmi_wait[],0
RESTORE_ALL
3:
#endif /* CONFIG_GDBSTUB */
mov (sp),d0 # restore TBR to d0
add 4,sp
#endif /* CONFIG_SMP */
bra __common_exception_nonmi
ENTRY(__common_exception)
add -4,sp
mov d0,(sp)
#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
mov (MMUCTR),d0
mov d0,(MMUCTR)
#endif
__common_exception_aux:
mov (TBR),d0
@ -331,15 +379,21 @@ __common_exception_nonmi:
mov d0,(REG_ORIG_D0,fp)
#ifdef CONFIG_GDBSTUB
#ifdef CONFIG_SMP
call gdbstub_busy_check[],0
and d0,d0 # check return value
beq 2f
#else /* CONFIG_SMP */
btst 0x01,(gdbstub_busy)
beq 2f
#endif /* CONFIG_SMP */
and ~EPSW_IE,epsw
mov fp,d0
mov a2,d1
call gdbstub_exception[],0 # gdbstub itself caused an exception
bra restore_all
2:
#endif
#endif /* CONFIG_GDBSTUB */
mov fp,d0 # arg 0: stacked register file
mov a2,d1 # arg 1: exception number
@ -374,11 +428,7 @@ ENTRY(set_excp_vector)
add exception_table,d0
mov d1,(d0)
mov 4,d1
#if defined(CONFIG_MN10300_CACHE_WBACK)
jmp mn10300_dcache_flush_inv_range2
#else
ret [],0
#endif
###############################################################################
#

273
arch/mn10300/kernel/fpu-low.S
Просмотреть файл

@ -8,25 +8,14 @@
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/linkage.h>
#include <asm/cpu-regs.h>
#include <asm/smp.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/frame.inc>
###############################################################################
#
# void fpu_init_state(void)
# - initialise the FPU
#
###############################################################################
.globl fpu_init_state
.type fpu_init_state,@function
fpu_init_state:
mov epsw,d0
or EPSW_FE,epsw
#ifdef CONFIG_MN10300_PROC_MN103E010
nop
nop
nop
#endif
.macro FPU_INIT_STATE_ALL
fmov 0,fs0
fmov fs0,fs1
fmov fs0,fs2
@ -60,7 +49,100 @@ fpu_init_state:
fmov fs0,fs30
fmov fs0,fs31
fmov FPCR_INIT,fpcr
.endm
.macro FPU_SAVE_ALL areg,dreg
fmov fs0,(\areg+)
fmov fs1,(\areg+)
fmov fs2,(\areg+)
fmov fs3,(\areg+)
fmov fs4,(\areg+)
fmov fs5,(\areg+)
fmov fs6,(\areg+)
fmov fs7,(\areg+)
fmov fs8,(\areg+)
fmov fs9,(\areg+)
fmov fs10,(\areg+)
fmov fs11,(\areg+)
fmov fs12,(\areg+)
fmov fs13,(\areg+)
fmov fs14,(\areg+)
fmov fs15,(\areg+)
fmov fs16,(\areg+)
fmov fs17,(\areg+)
fmov fs18,(\areg+)
fmov fs19,(\areg+)
fmov fs20,(\areg+)
fmov fs21,(\areg+)
fmov fs22,(\areg+)
fmov fs23,(\areg+)
fmov fs24,(\areg+)
fmov fs25,(\areg+)
fmov fs26,(\areg+)
fmov fs27,(\areg+)
fmov fs28,(\areg+)
fmov fs29,(\areg+)
fmov fs30,(\areg+)
fmov fs31,(\areg+)
fmov fpcr,\dreg
mov \dreg,(\areg)
.endm
.macro FPU_RESTORE_ALL areg,dreg
fmov (\areg+),fs0
fmov (\areg+),fs1
fmov (\areg+),fs2
fmov (\areg+),fs3
fmov (\areg+),fs4
fmov (\areg+),fs5
fmov (\areg+),fs6
fmov (\areg+),fs7
fmov (\areg+),fs8
fmov (\areg+),fs9
fmov (\areg+),fs10
fmov (\areg+),fs11
fmov (\areg+),fs12
fmov (\areg+),fs13
fmov (\areg+),fs14
fmov (\areg+),fs15
fmov (\areg+),fs16
fmov (\areg+),fs17
fmov (\areg+),fs18
fmov (\areg+),fs19
fmov (\areg+),fs20
fmov (\areg+),fs21
fmov (\areg+),fs22
fmov (\areg+),fs23
fmov (\areg+),fs24
fmov (\areg+),fs25
fmov (\areg+),fs26
fmov (\areg+),fs27
fmov (\areg+),fs28
fmov (\areg+),fs29
fmov (\areg+),fs30
fmov (\areg+),fs31
mov (\areg),\dreg
fmov \dreg,fpcr
.endm
###############################################################################
#
# void fpu_init_state(void)
# - initialise the FPU
#
###############################################################################
.globl fpu_init_state
.type fpu_init_state,@function
fpu_init_state:
mov epsw,d0
or EPSW_FE,epsw
#ifdef CONFIG_MN10300_PROC_MN103E010
nop
nop
nop
#endif
FPU_INIT_STATE_ALL
#ifdef CONFIG_MN10300_PROC_MN103E010
nop
nop
@ -89,40 +171,7 @@ fpu_save:
nop
#endif
mov d0,a0
fmov fs0,(a0+)
fmov fs1,(a0+)
fmov fs2,(a0+)
fmov fs3,(a0+)
fmov fs4,(a0+)
fmov fs5,(a0+)
fmov fs6,(a0+)
fmov fs7,(a0+)
fmov fs8,(a0+)
fmov fs9,(a0+)
fmov fs10,(a0+)
fmov fs11,(a0+)
fmov fs12,(a0+)
fmov fs13,(a0+)
fmov fs14,(a0+)
fmov fs15,(a0+)
fmov fs16,(a0+)
fmov fs17,(a0+)
fmov fs18,(a0+)
fmov fs19,(a0+)
fmov fs20,(a0+)
fmov fs21,(a0+)
fmov fs22,(a0+)
fmov fs23,(a0+)
fmov fs24,(a0+)
fmov fs25,(a0+)
fmov fs26,(a0+)
fmov fs27,(a0+)
fmov fs28,(a0+)
fmov fs29,(a0+)
fmov fs30,(a0+)
fmov fs31,(a0+)
fmov fpcr,d0
mov d0,(a0)
FPU_SAVE_ALL a0,d0
#ifdef CONFIG_MN10300_PROC_MN103E010
nop
nop
@ -135,63 +184,75 @@ fpu_save:
###############################################################################
#
# void fpu_restore(struct fpu_state_struct *)
# - restore the fpu state
# - note that an FPU Operational exception might occur during this process
# void fpu_disabled(void)
# - handle an exception due to the FPU being disabled
# when CONFIG_FPU is enabled
#
###############################################################################
.globl fpu_restore
.type fpu_restore,@function
fpu_restore:
mov epsw,d1
or EPSW_FE,epsw /* enable the FPU so we can access it */
.type fpu_disabled,@function
.globl fpu_disabled
fpu_disabled:
or EPSW_nAR|EPSW_FE,epsw
nop
nop
nop
#ifdef CONFIG_MN10300_PROC_MN103E010
nop
nop
#endif
mov d0,a0
fmov (a0+),fs0
fmov (a0+),fs1
fmov (a0+),fs2
fmov (a0+),fs3
fmov (a0+),fs4
fmov (a0+),fs5
fmov (a0+),fs6
fmov (a0+),fs7
fmov (a0+),fs8
fmov (a0+),fs9
fmov (a0+),fs10
fmov (a0+),fs11
fmov (a0+),fs12
fmov (a0+),fs13
fmov (a0+),fs14
fmov (a0+),fs15
fmov (a0+),fs16
fmov (a0+),fs17
fmov (a0+),fs18
fmov (a0+),fs19
fmov (a0+),fs20
fmov (a0+),fs21
fmov (a0+),fs22
fmov (a0+),fs23
fmov (a0+),fs24
fmov (a0+),fs25
fmov (a0+),fs26
fmov (a0+),fs27
fmov (a0+),fs28
fmov (a0+),fs29
fmov (a0+),fs30
fmov (a0+),fs31
mov (a0),d0
fmov d0,fpcr
#ifdef CONFIG_MN10300_PROC_MN103E010
nop
nop
nop
#endif
mov sp,a1
mov (a1),d1 /* get epsw of user context */
and ~(THREAD_SIZE-1),a1 /* a1: (thread_info *ti) */
mov (TI_task,a1),a2 /* a2: (task_struct *tsk) */
btst EPSW_nSL,d1
beq fpu_used_in_kernel
mov d1,epsw
ret [],0
or EPSW_FE,d1
mov d1,(sp)
mov (TASK_THREAD+THREAD_FPU_FLAGS,a2),d1
#ifndef CONFIG_LAZY_SAVE_FPU
or __THREAD_HAS_FPU,d1
mov d1,(TASK_THREAD+THREAD_FPU_FLAGS,a2)
#else /* !CONFIG_LAZY_SAVE_FPU */
mov (fpu_state_owner),a0
cmp 0,a0
beq fpu_regs_save_end
.size fpu_restore,.-fpu_restore
mov (TASK_THREAD+THREAD_UREGS,a0),a1
add TASK_THREAD+THREAD_FPU_STATE,a0
FPU_SAVE_ALL a0,d0
mov (REG_EPSW,a1),d0
and ~EPSW_FE,d0
mov d0,(REG_EPSW,a1)
fpu_regs_save_end:
mov a2,(fpu_state_owner)
#endif /* !CONFIG_LAZY_SAVE_FPU */
btst __THREAD_USING_FPU,d1
beq fpu_regs_init
add TASK_THREAD+THREAD_FPU_STATE,a2
FPU_RESTORE_ALL a2,d0
rti
fpu_regs_init:
FPU_INIT_STATE_ALL
add TASK_THREAD+THREAD_FPU_FLAGS,a2
bset __THREAD_USING_FPU,(0,a2)
rti
fpu_used_in_kernel:
and ~(EPSW_nAR|EPSW_FE),epsw
nop
nop
add -4,sp
SAVE_ALL
mov -1,d0
mov d0,(REG_ORIG_D0,fp)
and ~EPSW_NMID,epsw
mov fp,d0
call fpu_disabled_in_kernel[],0
jmp ret_from_exception
.size fpu_disabled,.-fpu_disabled

39
arch/mn10300/kernel/fpu-nofpu-low.S Normal file
Просмотреть файл

@ -0,0 +1,39 @@
/* MN10300 Low level FPU management operations
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/linkage.h>
#include <asm/cpu-regs.h>
#include <asm/smp.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/frame.inc>
###############################################################################
#
# void fpu_disabled(void)
# - handle an exception due to the FPU being disabled
# when CONFIG_FPU is disabled
#
###############################################################################
.type fpu_disabled,@function
.globl fpu_disabled
fpu_disabled:
add -4,sp
SAVE_ALL
mov -1,d0
mov d0,(REG_ORIG_D0,fp)
and ~EPSW_NMID,epsw
mov fp,d0
call unexpected_fpu_exception[],0
jmp ret_from_exception
.size fpu_disabled,.-fpu_disabled

30
arch/mn10300/kernel/fpu-nofpu.c Normal file
Просмотреть файл

@ -0,0 +1,30 @@
/* MN10300 FPU management
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <asm/fpu.h>
/*
* handle an FPU operational exception
* - there's a possibility that if the FPU is asynchronous, the signal might
* be meant for a process other than the current one
*/
asmlinkage
void unexpected_fpu_exception(struct pt_regs *regs, enum exception_code code)
{
panic("An FPU exception was received, but there's no FPU enabled.");
}
/*
* fill in the FPU structure for a core dump
*/
int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg)
{
return 0; /* not valid */
}

139
arch/mn10300/kernel/fpu.c
Просмотреть файл

@ -12,56 +12,19 @@
#include <asm/fpu.h>
#include <asm/elf.h>
#include <asm/exceptions.h>
#include <asm/system.h>
#ifdef CONFIG_LAZY_SAVE_FPU
struct task_struct *fpu_state_owner;
#endif
/*
* handle an exception due to the FPU being disabled
* error functions in FPU disabled exception
*/
asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code)
asmlinkage void fpu_disabled_in_kernel(struct pt_regs *regs)
{
struct task_struct *tsk = current;
if (!user_mode(regs))
die_if_no_fixup("An FPU Disabled exception happened in"
" kernel space\n",
regs, code);
#ifdef CONFIG_FPU
preempt_disable();
/* transfer the last process's FPU state to memory */
if (fpu_state_owner) {
fpu_save(&fpu_state_owner->thread.fpu_state);
fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
}
/* the current process now owns the FPU state */
fpu_state_owner = tsk;
regs->epsw |= EPSW_FE;
/* load the FPU with the current process's FPU state or invent a new
* clean one if the process doesn't have one */
if (is_using_fpu(tsk)) {
fpu_restore(&tsk->thread.fpu_state);
} else {
fpu_init_state();
set_using_fpu(tsk);
}
preempt_enable();
#else
{
siginfo_t info;
info.si_signo = SIGFPE;
info.si_errno = 0;
info.si_addr = (void *) tsk->thread.uregs->pc;
info.si_code = FPE_FLTINV;
force_sig_info(SIGFPE, &info, tsk);
}
#endif /* CONFIG_FPU */
die_if_no_fixup("An FPU Disabled exception happened in kernel space\n",
regs, EXCEP_FPU_DISABLED);
}
/*
@ -71,15 +34,16 @@ asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code)
*/
asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
{
struct task_struct *tsk = fpu_state_owner;
struct task_struct *tsk = current;
siginfo_t info;
u32 fpcr;
if (!user_mode(regs))
die_if_no_fixup("An FPU Operation exception happened in"
" kernel space\n",
regs, code);
if (!tsk)
if (!is_using_fpu(tsk))
die_if_no_fixup("An FPU Operation exception happened,"
" but the FPU is not in use",
regs, code);
@ -89,48 +53,45 @@ asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
info.si_addr = (void *) tsk->thread.uregs->pc;
info.si_code = FPE_FLTINV;
#ifdef CONFIG_FPU
{
u32 fpcr;
unlazy_fpu(tsk);
/* get FPCR (we need to enable the FPU whilst we do this) */
asm volatile(" or %1,epsw \n"
#ifdef CONFIG_MN10300_PROC_MN103E010
" nop \n"
" nop \n"
" nop \n"
#endif
" fmov fpcr,%0 \n"
#ifdef CONFIG_MN10300_PROC_MN103E010
" nop \n"
" nop \n"
" nop \n"
#endif
" and %2,epsw \n"
: "=&d"(fpcr)
: "i"(EPSW_FE), "i"(~EPSW_FE)
);
fpcr = tsk->thread.fpu_state.fpcr;
if (fpcr & FPCR_EC_Z)
info.si_code = FPE_FLTDIV;
else if (fpcr & FPCR_EC_O)
info.si_code = FPE_FLTOVF;
else if (fpcr & FPCR_EC_U)
info.si_code = FPE_FLTUND;
else if (fpcr & FPCR_EC_I)
info.si_code = FPE_FLTRES;
}
#endif
if (fpcr & FPCR_EC_Z)
info.si_code = FPE_FLTDIV;
else if (fpcr & FPCR_EC_O)
info.si_code = FPE_FLTOVF;
else if (fpcr & FPCR_EC_U)
info.si_code = FPE_FLTUND;
else if (fpcr & FPCR_EC_I)
info.si_code = FPE_FLTRES;
force_sig_info(SIGFPE, &info, tsk);
}
/*
* handle an FPU invalid_op exception
* - Derived from DO_EINFO() macro in arch/mn10300/kernel/traps.c
*/
asmlinkage void fpu_invalid_op(struct pt_regs *regs, enum exception_code code)
{
siginfo_t info;
if (!user_mode(regs))
die_if_no_fixup("FPU invalid opcode", regs, code);
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_COPROC;
info.si_addr = (void *) regs->pc;
force_sig_info(info.si_signo, &info, current);
}
/*
* save the FPU state to a signal context
*/
int fpu_setup_sigcontext(struct fpucontext *fpucontext)
{
#ifdef CONFIG_FPU
struct task_struct *tsk = current;
if (!is_using_fpu(tsk))
@ -142,11 +103,19 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext)
*/
preempt_disable();
#ifndef CONFIG_LAZY_SAVE_FPU
if (tsk->thread.fpu_flags & THREAD_HAS_FPU) {
fpu_save(&tsk->thread.fpu_state);
tsk->thread.uregs->epsw &= ~EPSW_FE;
tsk->thread.fpu_flags &= ~THREAD_HAS_FPU;
}
#else /* !CONFIG_LAZY_SAVE_FPU */
if (fpu_state_owner == tsk) {
fpu_save(&tsk->thread.fpu_state);
fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
fpu_state_owner = NULL;
}
#endif /* !CONFIG_LAZY_SAVE_FPU */
preempt_enable();
@ -161,9 +130,6 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext)
return -1;
return 1;
#else
return 0;
#endif
}
/*
@ -171,17 +137,23 @@ int fpu_setup_sigcontext(struct fpucontext *fpucontext)
*/
void fpu_kill_state(struct task_struct *tsk)
{
#ifdef CONFIG_FPU
/* disown anything left in the FPU */
preempt_disable();
#ifndef CONFIG_LAZY_SAVE_FPU
if (tsk->thread.fpu_flags & THREAD_HAS_FPU) {
tsk->thread.uregs->epsw &= ~EPSW_FE;
tsk->thread.fpu_flags &= ~THREAD_HAS_FPU;
}
#else /* !CONFIG_LAZY_SAVE_FPU */
if (fpu_state_owner == tsk) {
fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
fpu_state_owner = NULL;
}
#endif /* !CONFIG_LAZY_SAVE_FPU */
preempt_enable();
#endif
/* we no longer have a valid current FPU state */
clear_using_fpu(tsk);
}
@ -195,8 +167,7 @@ int fpu_restore_sigcontext(struct fpucontext *fpucontext)
int ret;
/* load up the old FPU state */
ret = copy_from_user(&tsk->thread.fpu_state,
fpucontext,
ret = copy_from_user(&tsk->thread.fpu_state, fpucontext,
min(sizeof(struct fpu_state_struct),
sizeof(struct fpucontext)));
if (!ret)

5
arch/mn10300/kernel/gdb-io-serial-low.S
Просмотреть файл

@ -18,6 +18,7 @@
#include <asm/thread_info.h>
#include <asm/frame.inc>
#include <asm/intctl-regs.h>
#include <asm/irqflags.h>
#include <unit/serial.h>
.text
@ -69,7 +70,7 @@ gdbstub_io_rx_overflow:
bra gdbstub_io_rx_done
gdbstub_io_rx_enter:
or EPSW_IE|EPSW_IM_1,epsw
LOCAL_CHANGE_INTR_MASK_LEVEL(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL+1))
add -4,sp
SAVE_ALL
@ -80,7 +81,7 @@ gdbstub_io_rx_enter:
mov fp,d0
call gdbstub_rx_irq[],0 # gdbstub_rx_irq(regs,excep)
and ~EPSW_IE,epsw
LOCAL_CLI
bclr 0x01,(gdbstub_busy)
.globl gdbstub_return

37
arch/mn10300/kernel/gdb-io-serial.c
Просмотреть файл

@ -23,6 +23,7 @@
#include <asm/exceptions.h>
#include <asm/serial-regs.h>
#include <unit/serial.h>
#include <asm/smp.h>
/*
* initialise the GDB stub
@ -45,22 +46,34 @@ void gdbstub_io_init(void)
XIRQxICR(GDBPORT_SERIAL_IRQ) = 0;
tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
#if CONFIG_GDBSTUB_IRQ_LEVEL == 0
IVAR0 = EXCEP_IRQ_LEVEL0;
set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
#elif CONFIG_GDBSTUB_IRQ_LEVEL == 1
IVAR1 = EXCEP_IRQ_LEVEL1;
#elif CONFIG_GDBSTUB_IRQ_LEVEL == 2
IVAR2 = EXCEP_IRQ_LEVEL2;
#elif CONFIG_GDBSTUB_IRQ_LEVEL == 3
IVAR3 = EXCEP_IRQ_LEVEL3;
#elif CONFIG_GDBSTUB_IRQ_LEVEL == 4
IVAR4 = EXCEP_IRQ_LEVEL4;
#elif CONFIG_GDBSTUB_IRQ_LEVEL == 5
IVAR5 = EXCEP_IRQ_LEVEL5;
#else
#error "Unknown irq level for gdbstub."
#endif
set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL),
gdbstub_io_rx_handler);
XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST;
XIRQxICR(GDBPORT_SERIAL_IRQ) = GxICR_ENABLE | GxICR_LEVEL_0;
XIRQxICR(GDBPORT_SERIAL_IRQ) =
GxICR_ENABLE | NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL);
tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
/* permit level 0 IRQs to take place */
asm volatile(
" and %0,epsw \n"
" or %1,epsw \n"
:
: "i"(~EPSW_IM), "i"(EPSW_IE | EPSW_IM_1)
);
local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
@ -87,6 +100,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
{
unsigned ix;
u8 ch, st;
#if defined(CONFIG_MN10300_WD_TIMER)
int cpu;
#endif
*_ch = 0xff;
@ -104,8 +120,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
if (nonblock)
return -EAGAIN;
#ifdef CONFIG_MN10300_WD_TIMER
watchdog_alert_counter = 0;
#endif /* CONFIG_MN10300_WD_TIMER */
for (cpu = 0; cpu < NR_CPUS; cpu++)
watchdog_alert_counter[cpu] = 0;
#endif
goto try_again;
}

24
arch/mn10300/kernel/gdb-io-ttysm.c
Просмотреть файл

@ -58,9 +58,12 @@ void __init gdbstub_io_init(void)
gdbstub_io_set_baud(115200);
/* we want to get serial receive interrupts */
set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0);
set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0);
set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
set_intr_level(gdbstub_port->rx_irq,
NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL));
set_intr_level(gdbstub_port->tx_irq,
NUM2GxICR_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL));
set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_GDBSTUB_IRQ_LEVEL),
gdbstub_io_rx_handler);
*gdbstub_port->rx_icr |= GxICR_ENABLE;
tmp = *gdbstub_port->rx_icr;
@ -84,12 +87,7 @@ void __init gdbstub_io_init(void)
tmp = *gdbstub_port->_control;
/* permit level 0 IRQs only */
asm volatile(
" and %0,epsw \n"
" or %1,epsw \n"
:
: "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1)
);
local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
@ -184,6 +182,9 @@ int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
{
unsigned ix;
u8 ch, st;
#if defined(CONFIG_MN10300_WD_TIMER)
int cpu;
#endif
*_ch = 0xff;
@ -201,8 +202,9 @@ try_again:
if (nonblock)
return -EAGAIN;
#ifdef CONFIG_MN10300_WD_TIMER
watchdog_alert_counter = 0;
#endif /* CONFIG_MN10300_WD_TIMER */
for (cpu = 0; cpu < NR_CPUS; cpu++)
watchdog_alert_counter[cpu] = 0;
#endif
goto try_again;
}

17
arch/mn10300/kernel/gdb-stub.c
Просмотреть файл

@ -440,15 +440,11 @@ static const unsigned char gdbstub_insn_sizes[256] =
static int __gdbstub_mark_bp(u8 *addr, int ix)
{
if (addr < (u8 *) 0x70000000UL)
return 0;
/* 70000000-7fffffff: vmalloc area */
if (addr < (u8 *) 0x80000000UL)
/* vmalloc area */
if (((u8 *) VMALLOC_START <= addr) && (addr < (u8 *) VMALLOC_END))
goto okay;
if (addr < (u8 *) 0x8c000000UL)
return 0;
/* 8c000000-93ffffff: SRAM, SDRAM */
if (addr < (u8 *) 0x94000000UL)
/* SRAM, SDRAM */
if (((u8 *) 0x80000000UL <= addr) && (addr < (u8 *) 0xa0000000UL))
goto okay;
return 0;
@ -1197,9 +1193,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
mn10300_set_gdbleds(1);
asm volatile("mov mdr,%0" : "=d"(mdr));
asm volatile("mov epsw,%0" : "=d"(epsw));
asm volatile("mov %0,epsw"
:: "d"((epsw & ~EPSW_IM) | EPSW_IE | EPSW_IM_1));
local_save_flags(epsw);
local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
gdbstub_store_fpu();

202
arch/mn10300/kernel/head.S
Просмотреть файл

@ -19,6 +19,12 @@
#include <asm/frame.inc>
#include <asm/param.h>
#include <unit/serial.h>
#ifdef CONFIG_SMP
#include <asm/smp.h>
#include <asm/intctl-regs.h>
#include <asm/cpu-regs.h>
#include <proc/smp-regs.h>
#endif /* CONFIG_SMP */
__HEAD
@ -30,17 +36,51 @@
.globl _start
.type _start,@function
_start:
#ifdef CONFIG_SMP
#
# If this is a secondary CPU (AP), then deal with that elsewhere
#
mov (CPUID),d3
and CPUID_MASK,d3
bne startup_secondary
#
# We're dealing with the primary CPU (BP) here, then.
# Keep BP's D0,D1,D2 register for boot check.
#
# Set up the Boot IPI for each secondary CPU
mov 0x1,a0
loop_set_secondary_icr:
mov a0,a1
asl CROSS_ICR_CPU_SHIFT,a1
add CROSS_GxICR(SMP_BOOT_IRQ,0),a1
movhu (a1),d3
or GxICR_ENABLE|GxICR_LEVEL_0,d3
movhu d3,(a1)
movhu (a1),d3 # flush
inc a0
cmp NR_CPUS,a0
bne loop_set_secondary_icr
#endif /* CONFIG_SMP */
# save commandline pointer
mov d0,a3
# preload the PGD pointer register
mov swapper_pg_dir,d0
mov d0,(PTBR)
clr d0
movbu d0,(PIDR)
# turn on the TLBs
mov MMUCTR_IIV|MMUCTR_DIV,d0
mov d0,(MMUCTR)
#ifdef CONFIG_AM34_2
mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0
#else
mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0
#endif
mov d0,(MMUCTR)
# turn on AM33v2 exception handling mode and set the trap table base
@ -51,6 +91,11 @@ _start:
mov d0,(TBR)
# invalidate and enable both of the caches
#ifdef CONFIG_SMP
mov ECHCTR,a0
clr d0
mov d0,(a0)
#endif
mov CHCTR,a0
clr d0
movhu d0,(a0) # turn off first
@ -61,18 +106,18 @@ _start:
btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
lne
#ifndef CONFIG_MN10300_CACHE_DISABLED
#ifdef CONFIG_MN10300_CACHE_ENABLED
#ifdef CONFIG_MN10300_CACHE_WBACK
#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
#else
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0
#endif /* CACHE_DISABLED */
#endif /* NOWRALLOC */
#else
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
#endif /* WBACK */
movhu d0,(a0) # enable
#endif /* NOWRALLOC */
#endif /* ENABLED */
# turn on RTS on the debug serial port if applicable
#ifdef CONFIG_MN10300_UNIT_ASB2305
@ -206,6 +251,44 @@ __no_parameters:
call processor_init[],0
call unit_init[],0
#ifdef CONFIG_SMP
# mark the primary CPU in cpu_boot_map
mov cpu_boot_map,a0
mov 0x1,d0
mov d0,(a0)
# signal each secondary CPU to begin booting
mov 0x1,d2 # CPU ID
loop_request_boot_secondary:
mov d2,a0
# send SMP_BOOT_IPI to secondary CPU
asl CROSS_ICR_CPU_SHIFT,a0
add CROSS_GxICR(SMP_BOOT_IRQ,0),a0
movhu (a0),d0
or GxICR_REQUEST|GxICR_DETECT,d0
movhu d0,(a0)
movhu (a0),d0 # flush
# wait up to 100ms for AP's IPI to be received
clr d3
wait_on_secondary_boot:
mov DELAY_TIME_BOOT_IPI,d0
call __delay[],0
inc d3
mov cpu_boot_map,a0
mov (a0),d0
lsr d2,d0
btst 0x1,d0
bne 1f
cmp TIME_OUT_COUNT_BOOT_IPI,d3
bne wait_on_secondary_boot
1:
inc d2
cmp NR_CPUS,d2
bne loop_request_boot_secondary
#endif /* CONFIG_SMP */
#ifdef CONFIG_GDBSTUB
call gdbstub_init[],0
@ -217,7 +300,118 @@ __gdbstub_pause:
#endif
jmp start_kernel
.size _start, _start-.
.size _start,.-_start
###############################################################################
#
# Secondary CPU boot point
#
###############################################################################
#ifdef CONFIG_SMP
startup_secondary:
# preload the PGD pointer register
mov swapper_pg_dir,d0
mov d0,(PTBR)
clr d0
movbu d0,(PIDR)
# turn on the TLBs
mov MMUCTR_IIV|MMUCTR_DIV,d0
mov d0,(MMUCTR)
#ifdef CONFIG_AM34_2
mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0
#else
mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0
#endif
mov d0,(MMUCTR)
# turn on AM33v2 exception handling mode and set the trap table base
movhu (CPUP),d0
or CPUP_EXM_AM33V2,d0
movhu d0,(CPUP)
# set the interrupt vector table
mov CONFIG_INTERRUPT_VECTOR_BASE,d0
mov d0,(TBR)
# invalidate and enable both of the caches
mov ECHCTR,a0
clr d0
mov d0,(a0)
mov CHCTR,a0
clr d0
movhu d0,(a0) # turn off first
mov CHCTR_ICINV|CHCTR_DCINV,d0
movhu d0,(a0)
setlb
mov (a0),d0
btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer)
lne
#ifdef CONFIG_MN10300_CACHE_ENABLED
#ifdef CONFIG_MN10300_CACHE_WBACK
#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
#else
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0
#endif /* !NOWRALLOC */
#else
mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
#endif /* WBACK */
movhu d0,(a0) # enable
#endif /* ENABLED */
# Clear the boot IPI interrupt for this CPU
movhu (GxICR(SMP_BOOT_IRQ)),d0
and ~GxICR_REQUEST,d0
movhu d0,(GxICR(SMP_BOOT_IRQ))
movhu (GxICR(SMP_BOOT_IRQ)),d0 # flush
/* get stack */
mov CONFIG_INTERRUPT_VECTOR_BASE + CONFIG_BOOT_STACK_OFFSET,a0
mov (CPUID),d0
and CPUID_MASK,d0
mulu CONFIG_BOOT_STACK_SIZE,d0
sub d0,a0
mov a0,sp
# init interrupt for AP
call smp_prepare_cpu_init[],0
# mark this secondary CPU in cpu_boot_map
mov (CPUID),d0
mov 0x1,d1
asl d0,d1
mov cpu_boot_map,a0
bset d1,(a0)
or EPSW_IE|EPSW_IM_1,epsw # permit level 0 interrupts
nop
nop
#ifdef CONFIG_MN10300_CACHE_WBACK
# flush the local cache if it's in writeback mode
call mn10300_local_dcache_flush_inv[],0
setlb
mov (CHCTR),d0
btst CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer)
lne
#endif
# now sleep waiting for further instructions
secondary_sleep:
mov CPUM_SLEEP,d0
movhu d0,(CPUM)
nop
nop
bra secondary_sleep
.size startup_secondary,.-startup_secondary
#endif /* CONFIG_SMP */
###############################################################################
#
#
#
###############################################################################
ENTRY(__head_end)
/*

25
arch/mn10300/kernel/internal.h
Просмотреть файл

@ -9,6 +9,9 @@
* 2 of the Licence, or (at your option) any later version.
*/
struct clocksource;
struct clock_event_device;
/*
* kthread.S
*/
@ -18,3 +21,25 @@ extern int kernel_thread_helper(int);
* entry.S
*/
extern void ret_from_fork(struct task_struct *) __attribute__((noreturn));
/*
* smp-low.S
*/
#ifdef CONFIG_SMP
extern void mn10300_low_ipi_handler(void);
#endif
/*
* time.c
*/
extern irqreturn_t local_timer_interrupt(void);
/*
* time.c
*/
#ifdef CONFIG_CEVT_MN10300
extern void clockevent_set_clock(struct clock_event_device *, unsigned int);
#endif
#ifdef CONFIG_CSRC_MN10300
extern void clocksource_set_clock(struct clocksource *, unsigned int);
#endif

276
arch/mn10300/kernel/irq.c
Просмотреть файл

@ -12,11 +12,26 @@
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
#include <linux/cpumask.h>
#include <asm/setup.h>
#include <asm/serial-regs.h>
unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7;
unsigned long __mn10300_irq_enabled_epsw[NR_CPUS] __cacheline_aligned_in_smp = {
[0 ... NR_CPUS - 1] = EPSW_IE | EPSW_IM_7
};
EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
#ifdef CONFIG_SMP
static char irq_affinity_online[NR_IRQS] = {
[0 ... NR_IRQS - 1] = 0
};
#define NR_IRQ_WORDS ((NR_IRQS + 31) / 32)
static unsigned long irq_affinity_request[NR_IRQ_WORDS] = {
[0 ... NR_IRQ_WORDS - 1] = 0
};
#endif /* CONFIG_SMP */
atomic_t irq_err_count;
/*
@ -24,30 +39,67 @@ atomic_t irq_err_count;
*/
static void mn10300_cpupic_ack(unsigned int irq)
{
unsigned long flags;
u16 tmp;
*(volatile u8 *) &GxICR(irq) = GxICR_DETECT;
flags = arch_local_cli_save();
GxICR_u8(irq) = GxICR_DETECT;
tmp = GxICR(irq);
arch_local_irq_restore(flags);
}
static void __mask_and_set_icr(unsigned int irq,
unsigned int mask, unsigned int set)
{
unsigned long flags;
u16 tmp;
flags = arch_local_cli_save();
tmp = GxICR(irq);
GxICR(irq) = (tmp & mask) | set;
tmp = GxICR(irq);
arch_local_irq_restore(flags);
}
static void mn10300_cpupic_mask(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL);
tmp = GxICR(irq);
__mask_and_set_icr(irq, GxICR_LEVEL, 0);
}
static void mn10300_cpupic_mask_ack(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
tmp = GxICR(irq);
#ifdef CONFIG_SMP
unsigned long flags;
u16 tmp;
flags = arch_local_cli_save();
if (!test_and_clear_bit(irq, irq_affinity_request)) {
tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
tmp = GxICR(irq);
} else {
u16 tmp2;
tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL);
tmp2 = GxICR(irq);
irq_affinity_online[irq] =
any_online_cpu(*irq_desc[irq].affinity);
CROSS_GxICR(irq, irq_affinity_online[irq]) =
(tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT;
tmp = CROSS_GxICR(irq, irq_affinity_online[irq]);
}
arch_local_irq_restore(flags);
#else /* CONFIG_SMP */
__mask_and_set_icr(irq, GxICR_LEVEL, GxICR_DETECT);
#endif /* CONFIG_SMP */
}
static void mn10300_cpupic_unmask(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
tmp = GxICR(irq);
__mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE);
}
static void mn10300_cpupic_unmask_clear(unsigned int irq)
@ -56,11 +108,89 @@ static void mn10300_cpupic_unmask_clear(unsigned int irq)
* device has ceased to assert its interrupt line and the interrupt
* channel has been disabled in the PIC, so for level-triggered
* interrupts we need to clear the request bit when we re-enable */
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
tmp = GxICR(irq);
#ifdef CONFIG_SMP
unsigned long flags;
u16 tmp;
flags = arch_local_cli_save();
if (!test_and_clear_bit(irq, irq_affinity_request)) {
tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
tmp = GxICR(irq);
} else {
tmp = GxICR(irq);
irq_affinity_online[irq] = any_online_cpu(*irq_desc[irq].affinity);
CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
tmp = CROSS_GxICR(irq, irq_affinity_online[irq]);
}
arch_local_irq_restore(flags);
#else /* CONFIG_SMP */
__mask_and_set_icr(irq, GxICR_LEVEL, GxICR_ENABLE | GxICR_DETECT);
#endif /* CONFIG_SMP */
}
#ifdef CONFIG_SMP
static int
mn10300_cpupic_setaffinity(unsigned int irq, const struct cpumask *mask)
{
unsigned long flags;
int err;
flags = arch_local_cli_save();
/* check irq no */
switch (irq) {
case TMJCIRQ:
case RESCHEDULE_IPI:
case CALL_FUNC_SINGLE_IPI:
case LOCAL_TIMER_IPI:
case FLUSH_CACHE_IPI:
case CALL_FUNCTION_NMI_IPI:
case GDB_NMI_IPI:
#ifdef CONFIG_MN10300_TTYSM0
case SC0RXIRQ:
case SC0TXIRQ:
#ifdef CONFIG_MN10300_TTYSM0_TIMER8
case TM8IRQ:
#elif CONFIG_MN10300_TTYSM0_TIMER2
case TM2IRQ:
#endif /* CONFIG_MN10300_TTYSM0_TIMER8 */
#endif /* CONFIG_MN10300_TTYSM0 */
#ifdef CONFIG_MN10300_TTYSM1
case SC1RXIRQ:
case SC1TXIRQ:
#ifdef CONFIG_MN10300_TTYSM1_TIMER12
case TM12IRQ:
#elif CONFIG_MN10300_TTYSM1_TIMER9
case TM9IRQ:
#elif CONFIG_MN10300_TTYSM1_TIMER3
case TM3IRQ:
#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */
#endif /* CONFIG_MN10300_TTYSM1 */
#ifdef CONFIG_MN10300_TTYSM2
case SC2RXIRQ:
case SC2TXIRQ:
case TM10IRQ:
#endif /* CONFIG_MN10300_TTYSM2 */
err = -1;
break;
default:
set_bit(irq, irq_affinity_request);
err = 0;
break;
}
arch_local_irq_restore(flags);
return err;
}
#endif /* CONFIG_SMP */
/*
* MN10300 PIC level-triggered IRQ handling.
*
@ -79,6 +209,9 @@ static struct irq_chip mn10300_cpu_pic_level = {
.mask = mn10300_cpupic_mask,
.mask_ack = mn10300_cpupic_mask,
.unmask = mn10300_cpupic_unmask_clear,
#ifdef CONFIG_SMP
.set_affinity = mn10300_cpupic_setaffinity,
#endif
};
/*
@ -94,6 +227,9 @@ static struct irq_chip mn10300_cpu_pic_edge = {
.mask = mn10300_cpupic_mask,
.mask_ack = mn10300_cpupic_mask_ack,
.unmask = mn10300_cpupic_unmask,
#ifdef CONFIG_SMP
.set_affinity = mn10300_cpupic_setaffinity,
#endif
};
/*
@ -111,14 +247,34 @@ void ack_bad_irq(int irq)
*/
void set_intr_level(int irq, u16 level)
{
u16 tmp;
BUG_ON(in_interrupt());
if (in_interrupt())
BUG();
__mask_and_set_icr(irq, GxICR_ENABLE, level);
}
tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_ENABLE) | level;
tmp = GxICR(irq);
void mn10300_intc_set_level(unsigned int irq, unsigned int level)
{
set_intr_level(irq, NUM2GxICR_LEVEL(level) & GxICR_LEVEL);
}
void mn10300_intc_clear(unsigned int irq)
{
__mask_and_set_icr(irq, GxICR_LEVEL | GxICR_ENABLE, GxICR_DETECT);
}
void mn10300_intc_set(unsigned int irq)
{
__mask_and_set_icr(irq, 0, GxICR_REQUEST | GxICR_DETECT);
}
void mn10300_intc_enable(unsigned int irq)
{
mn10300_cpupic_unmask(irq);
}
void mn10300_intc_disable(unsigned int irq)
{
mn10300_cpupic_mask(irq);
}
/*
@ -126,7 +282,7 @@ void set_intr_level(int irq, u16 level)
* than before
* - see Documentation/mn10300/features.txt
*/
void set_intr_postackable(int irq)
void mn10300_set_lateack_irq_type(int irq)
{
set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level,
handle_level_irq);
@ -147,6 +303,7 @@ void __init init_IRQ(void)
* interrupts */
set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge,
handle_level_irq);
unit_init_IRQ();
}
@ -156,20 +313,22 @@ void __init init_IRQ(void)
asmlinkage void do_IRQ(void)
{
unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw;
unsigned int cpu_id = smp_processor_id();
int irq;
sp = current_stack_pointer();
if (sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN)
BUG();
BUG_ON(sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN);
/* make sure local_irq_enable() doesn't muck up the interrupt priority
* setting in EPSW */
old_irq_enabled_epsw = __mn10300_irq_enabled_epsw;
old_irq_enabled_epsw = __mn10300_irq_enabled_epsw[cpu_id];
local_save_flags(epsw);
__mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw);
__mn10300_irq_enabled_epsw[cpu_id] = EPSW_IE | (EPSW_IM & epsw);
irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL;
__IRQ_STAT(smp_processor_id(), __irq_count)++;
#ifdef CONFIG_MN10300_WD_TIMER
__IRQ_STAT(cpu_id, __irq_count)++;
#endif
irq_enter();
@ -189,7 +348,7 @@ asmlinkage void do_IRQ(void)
local_irq_restore(epsw);
}
__mn10300_irq_enabled_epsw = old_irq_enabled_epsw;
__mn10300_irq_enabled_epsw[cpu_id] = old_irq_enabled_epsw;
irq_exit();
}
@ -222,9 +381,16 @@ int show_interrupts(struct seq_file *p, void *v)
seq_printf(p, "%3d: ", i);
for_each_present_cpu(cpu)
seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
seq_printf(p, " %14s.%u", irq_desc[i].chip->name,
(GxICR(i) & GxICR_LEVEL) >>
GxICR_LEVEL_SHIFT);
if (i < NR_CPU_IRQS)
seq_printf(p, " %14s.%u",
irq_desc[i].chip->name,
(GxICR(i) & GxICR_LEVEL) >>
GxICR_LEVEL_SHIFT);
else
seq_printf(p, " %14s",
irq_desc[i].chip->name);
seq_printf(p, " %s", action->name);
for (action = action->next;
@ -240,11 +406,13 @@ int show_interrupts(struct seq_file *p, void *v)
/* polish off with NMI and error counters */
case NR_IRQS:
#ifdef CONFIG_MN10300_WD_TIMER
seq_printf(p, "NMI: ");
for (j = 0; j < NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "%10u ", nmi_count(j));
seq_putc(p, '\n');
#endif
seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
break;
@ -252,3 +420,51 @@ int show_interrupts(struct seq_file *p, void *v)
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
void migrate_irqs(void)
{
irq_desc_t *desc;
int irq;
unsigned int self, new;
unsigned long flags;
self = smp_processor_id();
for (irq = 0; irq < NR_IRQS; irq++) {
desc = irq_desc + irq;
if (desc->status == IRQ_PER_CPU)
continue;
if (cpu_isset(self, irq_desc[irq].affinity) &&
!cpus_intersects(irq_affinity[irq], cpu_online_map)) {
int cpu_id;
cpu_id = first_cpu(cpu_online_map);
cpu_set(cpu_id, irq_desc[irq].affinity);
}
/* We need to operate irq_affinity_online atomically. */
arch_local_cli_save(flags);
if (irq_affinity_online[irq] == self) {
u16 x, tmp;
x = GxICR(irq);
GxICR(irq) = x & GxICR_LEVEL;
tmp = GxICR(irq);
new = any_online_cpu(irq_desc[irq].affinity);
irq_affinity_online[irq] = new;
CROSS_GxICR(irq, new) =
(x & GxICR_LEVEL) | GxICR_DETECT;
tmp = CROSS_GxICR(irq, new);
x &= GxICR_LEVEL | GxICR_ENABLE;
if (GxICR(irq) & GxICR_REQUEST) {
x |= GxICR_REQUEST | GxICR_DETECT;
CROSS_GxICR(irq, new) = x;
tmp = CROSS_GxICR(irq, new);
}
arch_local_irq_restore(flags);
}
}
#endif /* CONFIG_HOTPLUG_CPU */

4
arch/mn10300/kernel/kprobes.c
Просмотреть файл

@ -377,8 +377,10 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
#ifndef CONFIG_MN10300_CACHE_SNOOP
mn10300_dcache_flush();
mn10300_icache_inv();
#endif
}
void arch_remove_kprobe(struct kprobe *p)
@ -390,8 +392,10 @@ void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
{
*p->addr = p->opcode;
regs->pc = (unsigned long) p->addr;
#ifndef CONFIG_MN10300_CACHE_SNOOP
mn10300_dcache_flush();
mn10300_icache_inv();
#endif
}
static inline

6
arch/mn10300/kernel/mn10300-serial-low.S
Просмотреть файл

@ -39,7 +39,7 @@
###############################################################################
.balign L1_CACHE_BYTES
ENTRY(mn10300_serial_vdma_interrupt)
or EPSW_IE,psw # permit overriding by
# or EPSW_IE,psw # permit overriding by
# debugging interrupts
movm [d2,d3,a2,a3,exreg0],(sp)
@ -164,7 +164,7 @@ mnsc_vdma_tx_noint:
rti
mnsc_vdma_tx_empty:
mov +(GxICR_LEVEL_1|GxICR_DETECT),d2
mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2
movhu d2,(e3) # disable the interrupt
movhu (e3),d2 # flush
@ -175,7 +175,7 @@ mnsc_vdma_tx_break:
movhu (SCxCTR,e2),d2 # turn on break mode
or SC01CTR_BKE,d2
movhu d2,(SCxCTR,e2)
mov +(GxICR_LEVEL_1|GxICR_DETECT),d2
mov +(NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL)|GxICR_DETECT),d2
movhu d2,(e3) # disable transmit interrupts on this
# channel
movhu (e3),d2 # flush

210
arch/mn10300/kernel/mn10300-serial.c
Просмотреть файл

@ -44,6 +44,11 @@ static const char serial_revdate[] = "2007-11-06";
#include <unit/timex.h>
#include "mn10300-serial.h"
#ifdef CONFIG_SMP
#undef GxICR
#define GxICR(X) CROSS_GxICR(X, 0)
#endif /* CONFIG_SMP */
#define kenter(FMT, ...) \
printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
#define _enter(FMT, ...) \
@ -57,6 +62,11 @@ static const char serial_revdate[] = "2007-11-06";
#define _proto(FMT, ...) \
no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
#ifndef CODMSB
/* c_cflag bit meaning */
#define CODMSB 004000000000 /* change Transfer bit-order */
#endif
#define NR_UARTS 3
#ifdef CONFIG_MN10300_TTYSM_CONSOLE
@ -152,26 +162,35 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = {
.name = "ttySM0",
._iobase = &SC0CTR,
._control = &SC0CTR,
._status = (volatile u8 *) &SC0STR,
._status = (volatile u8 *)&SC0STR,
._intr = &SC0ICR,
._rxb = &SC0RXB,
._txb = &SC0TXB,
.rx_name = "ttySM0:Rx",
.tx_name = "ttySM0:Tx",
#ifdef CONFIG_MN10300_TTYSM0_TIMER8
#if defined(CONFIG_MN10300_TTYSM0_TIMER8)
.tm_name = "ttySM0:Timer8",
._tmxmd = &TM8MD,
._tmxbr = &TM8BR,
._tmicr = &TM8ICR,
.tm_irq = TM8IRQ,
.div_timer = MNSCx_DIV_TIMER_16BIT,
#else /* CONFIG_MN10300_TTYSM0_TIMER2 */
#elif defined(CONFIG_MN10300_TTYSM0_TIMER0)
.tm_name = "ttySM0:Timer0",
._tmxmd = &TM0MD,
._tmxbr = (volatile u16 *)&TM0BR,
._tmicr = &TM0ICR,
.tm_irq = TM0IRQ,
.div_timer = MNSCx_DIV_TIMER_8BIT,
#elif defined(CONFIG_MN10300_TTYSM0_TIMER2)
.tm_name = "ttySM0:Timer2",
._tmxmd = &TM2MD,
._tmxbr = (volatile u16 *) &TM2BR,
._tmxbr = (volatile u16 *)&TM2BR,
._tmicr = &TM2ICR,
.tm_irq = TM2IRQ,
.div_timer = MNSCx_DIV_TIMER_8BIT,
#else
#error "Unknown config for ttySM0"
#endif
.rx_irq = SC0RXIRQ,
.tx_irq = SC0TXIRQ,
@ -205,26 +224,35 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = {
.name = "ttySM1",
._iobase = &SC1CTR,
._control = &SC1CTR,
._status = (volatile u8 *) &SC1STR,
._status = (volatile u8 *)&SC1STR,
._intr = &SC1ICR,
._rxb = &SC1RXB,
._txb = &SC1TXB,
.rx_name = "ttySM1:Rx",
.tx_name = "ttySM1:Tx",
#ifdef CONFIG_MN10300_TTYSM1_TIMER9
#if defined(CONFIG_MN10300_TTYSM1_TIMER9)
.tm_name = "ttySM1:Timer9",
._tmxmd = &TM9MD,
._tmxbr = &TM9BR,
._tmicr = &TM9ICR,
.tm_irq = TM9IRQ,
.div_timer = MNSCx_DIV_TIMER_16BIT,
#else /* CONFIG_MN10300_TTYSM1_TIMER3 */
#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
.tm_name = "ttySM1:Timer3",
._tmxmd = &TM3MD,
._tmxbr = (volatile u16 *) &TM3BR,
._tmxbr = (volatile u16 *)&TM3BR,
._tmicr = &TM3ICR,
.tm_irq = TM3IRQ,
.div_timer = MNSCx_DIV_TIMER_8BIT,
#elif defined(CONFIG_MN10300_TTYSM1_TIMER12)
.tm_name = "ttySM1/Timer12",
._tmxmd = &TM12MD,
._tmxbr = &TM12BR,
._tmicr = &TM12ICR,
.tm_irq = TM12IRQ,
.div_timer = MNSCx_DIV_TIMER_16BIT,
#else
#error "Unknown config for ttySM1"
#endif
.rx_irq = SC1RXIRQ,
.tx_irq = SC1TXIRQ,
@ -260,20 +288,45 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = {
.uart.lock =
__SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
.name = "ttySM2",
.rx_name = "ttySM2:Rx",
.tx_name = "ttySM2:Tx",
.tm_name = "ttySM2:Timer10",
._iobase = &SC2CTR,
._control = &SC2CTR,
._status = &SC2STR,
._status = (volatile u8 *)&SC2STR,
._intr = &SC2ICR,
._rxb = &SC2RXB,
._txb = &SC2TXB,
.rx_name = "ttySM2:Rx",
.tx_name = "ttySM2:Tx",
#if defined(CONFIG_MN10300_TTYSM2_TIMER10)
.tm_name = "ttySM2/Timer10",
._tmxmd = &TM10MD,
._tmxbr = &TM10BR,
._tmicr = &TM10ICR,
.tm_irq = TM10IRQ,
.div_timer = MNSCx_DIV_TIMER_16BIT,
#elif defined(CONFIG_MN10300_TTYSM2_TIMER9)
.tm_name = "ttySM2/Timer9",
._tmxmd = &TM9MD,
._tmxbr = &TM9BR,
._tmicr = &TM9ICR,
.tm_irq = TM9IRQ,
.div_timer = MNSCx_DIV_TIMER_16BIT,
#elif defined(CONFIG_MN10300_TTYSM2_TIMER1)
.tm_name = "ttySM2/Timer1",
._tmxmd = &TM1MD,
._tmxbr = (volatile u16 *)&TM1BR,
._tmicr = &TM1ICR,
.tm_irq = TM1IRQ,
.div_timer = MNSCx_DIV_TIMER_8BIT,
#elif defined(CONFIG_MN10300_TTYSM2_TIMER3)
.tm_name = "ttySM2/Timer3",
._tmxmd = &TM3MD,
._tmxbr = (volatile u16 *)&TM3BR,
._tmicr = &TM3ICR,
.tm_irq = TM3IRQ,
.div_timer = MNSCx_DIV_TIMER_8BIT,
#else
#error "Unknown config for ttySM2"
#endif
.rx_irq = SC2RXIRQ,
.tx_irq = SC2TXIRQ,
.rx_icr = &GxICR(SC2RXIRQ),
@ -322,9 +375,13 @@ struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = {
*/
static void mn10300_serial_mask_ack(unsigned int irq)
{
unsigned long flags;
u16 tmp;
flags = arch_local_cli_save();
GxICR(irq) = GxICR_LEVEL_6;
tmp = GxICR(irq); /* flush write buffer */
arch_local_irq_restore(flags);
}
static void mn10300_serial_nop(unsigned int irq)
@ -348,23 +405,36 @@ struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS];
static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port)
{
unsigned long flags;
u16 x;
*port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
flags = arch_local_cli_save();
*port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
x = *port->tx_icr;
arch_local_irq_restore(flags);
}
static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port)
{
unsigned long flags;
u16 x;
*port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE;
flags = arch_local_cli_save();
*port->tx_icr =
NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | GxICR_ENABLE;
x = *port->tx_icr;
arch_local_irq_restore(flags);
}
static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port)
{
unsigned long flags;
u16 x;
*port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
flags = arch_local_cli_save();
*port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
x = *port->rx_icr;
arch_local_irq_restore(flags);
}
/*
@ -650,7 +720,7 @@ static unsigned int mn10300_serial_tx_empty(struct uart_port *_port)
static void mn10300_serial_set_mctrl(struct uart_port *_port,
unsigned int mctrl)
{
struct mn10300_serial_port *port =
struct mn10300_serial_port *port __attribute__ ((unused)) =
container_of(_port, struct mn10300_serial_port, uart);
_enter("%s,%x", port->name, mctrl);
@ -706,6 +776,7 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
UART_XMIT_SIZE));
/* kick the virtual DMA controller */
arch_local_cli();
x = *port->tx_icr;
x |= GxICR_ENABLE;
@ -716,10 +787,14 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
_debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx",
*port->_control, *port->_intr, *port->_status,
*port->_tmxmd, *port->_tmxbr, *port->tx_icr);
*port->_tmxmd,
(port->div_timer == MNSCx_DIV_TIMER_8BIT) ?
*(volatile u8 *)port->_tmxbr : *port->_tmxbr,
*port->tx_icr);
*port->tx_icr = x;
x = *port->tx_icr;
arch_local_sti();
}
/*
@ -842,8 +917,10 @@ static int mn10300_serial_startup(struct uart_port *_port)
pint->port = port;
pint->vdma = mn10300_serial_vdma_tx_handler;
set_intr_level(port->rx_irq, GxICR_LEVEL_1);
set_intr_level(port->tx_irq, GxICR_LEVEL_1);
set_intr_level(port->rx_irq,
NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL));
set_intr_level(port->tx_irq,
NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL));
set_irq_chip(port->tm_irq, &mn10300_serial_pic);
if (request_irq(port->rx_irq, mn10300_serial_interrupt,
@ -876,6 +953,7 @@ error:
*/
static void mn10300_serial_shutdown(struct uart_port *_port)
{
u16 x;
struct mn10300_serial_port *port =
container_of(_port, struct mn10300_serial_port, uart);
@ -897,8 +975,12 @@ static void mn10300_serial_shutdown(struct uart_port *_port)
free_irq(port->rx_irq, port);
free_irq(port->tx_irq, port);
*port->rx_icr = GxICR_LEVEL_1;
*port->tx_icr = GxICR_LEVEL_1;
arch_local_cli();
*port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
x = *port->rx_icr;
*port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
x = *port->tx_icr;
arch_local_sti();
}
/*
@ -947,11 +1029,66 @@ static void mn10300_serial_change_speed(struct mn10300_serial_port *port,
/* Determine divisor based on baud rate */
battempt = 0;
if (div_timer == MNSCx_DIV_TIMER_16BIT)
scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8
* == SC2CTR_CK_TM10UFLOW) */
else if (div_timer == MNSCx_DIV_TIMER_8BIT)
switch (port->uart.line) {
#ifdef CONFIG_MN10300_TTYSM0
case 0: /* ttySM0 */
#if defined(CONFIG_MN10300_TTYSM0_TIMER8)
scxctr |= SC0CTR_CK_TM8UFLOW_8;
#elif defined(CONFIG_MN10300_TTYSM0_TIMER0)
scxctr |= SC0CTR_CK_TM0UFLOW_8;
#elif defined(CONFIG_MN10300_TTYSM0_TIMER2)
scxctr |= SC0CTR_CK_TM2UFLOW_8;
#else
#error "Unknown config for ttySM0"
#endif
break;
#endif /* CONFIG_MN10300_TTYSM0 */
#ifdef CONFIG_MN10300_TTYSM1
case 1: /* ttySM1 */
#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
#if defined(CONFIG_MN10300_TTYSM1_TIMER9)
scxctr |= SC1CTR_CK_TM9UFLOW_8;
#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
scxctr |= SC1CTR_CK_TM3UFLOW_8;
#else
#error "Unknown config for ttySM1"
#endif
#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
#if defined(CONFIG_MN10300_TTYSM1_TIMER12)
scxctr |= SC1CTR_CK_TM12UFLOW_8;
#else
#error "Unknown config for ttySM1"
#endif
#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
break;
#endif /* CONFIG_MN10300_TTYSM1 */
#ifdef CONFIG_MN10300_TTYSM2
case 2: /* ttySM2 */
#if defined(CONFIG_AM33_2)
#if defined(CONFIG_MN10300_TTYSM2_TIMER10)
scxctr |= SC2CTR_CK_TM10UFLOW;
#else
#error "Unknown config for ttySM2"
#endif
#else /* CONFIG_AM33_2 */
#if defined(CONFIG_MN10300_TTYSM2_TIMER9)
scxctr |= SC2CTR_CK_TM9UFLOW_8;
#elif defined(CONFIG_MN10300_TTYSM2_TIMER1)
scxctr |= SC2CTR_CK_TM1UFLOW_8;
#elif defined(CONFIG_MN10300_TTYSM2_TIMER3)
scxctr |= SC2CTR_CK_TM3UFLOW_8;
#else
#error "Unknown config for ttySM2"
#endif
#endif /* CONFIG_AM33_2 */
break;
#endif /* CONFIG_MN10300_TTYSM2 */
default:
break;
}
try_alternative:
baud = uart_get_baud_rate(&port->uart, new, old, 0,
@ -1195,6 +1332,12 @@ static void mn10300_serial_set_termios(struct uart_port *_port,
ctr &= ~SC2CTR_TWE;
*port->_control = ctr;
}
/* change Transfer bit-order (LSB/MSB) */
if (new->c_cflag & CODMSB)
*port->_control |= SC01CTR_OD_MSBFIRST; /* MSB MODE */
else
*port->_control &= ~SC01CTR_OD_MSBFIRST; /* LSB MODE */
}
/*
@ -1302,11 +1445,16 @@ static int __init mn10300_serial_init(void)
printk(KERN_INFO "%s version %s (%s)\n",
serial_name, serial_version, serial_revdate);
#ifdef CONFIG_MN10300_TTYSM2
SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */
#if defined(CONFIG_MN10300_TTYSM2) && defined(CONFIG_AM33_2)
{
int tmp;
SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */
tmp = SC2TIM;
}
#endif
set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt);
set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL),
mn10300_serial_vdma_interrupt);
ret = uart_register_driver(&mn10300_serial_driver);
if (!ret) {
@ -1366,9 +1514,11 @@ static void mn10300_serial_console_write(struct console *co,
port = mn10300_serial_ports[co->index];
/* firstly hijack the serial port from the "virtual DMA" controller */
arch_local_cli();
txicr = *port->tx_icr;
*port->tx_icr = GxICR_LEVEL_1;
*port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
tmp = *port->tx_icr;
arch_local_sti();
/* the transmitter may be disabled */
scxctr = *port->_control;
@ -1422,8 +1572,10 @@ static void mn10300_serial_console_write(struct console *co,
if (!(scxctr & SC01CTR_TXE))
*port->_control = scxctr;
arch_local_cli();
*port->tx_icr = txicr;
tmp = *port->tx_icr;
arch_local_sti();
}
/*

9
arch/mn10300/kernel/mn10300-watchdog-low.S
Просмотреть файл

@ -16,6 +16,7 @@
#include <asm/intctl-regs.h>
#include <asm/timer-regs.h>
#include <asm/frame.inc>
#include <linux/threads.h>
.text
@ -53,7 +54,13 @@ watchdog_handler:
.type touch_nmi_watchdog,@function
touch_nmi_watchdog:
clr d0
mov d0,(watchdog_alert_counter)
clr d1
mov watchdog_alert_counter, a0
setlb
mov d0, (a0+)
inc d1
cmp NR_CPUS, d1
lne
ret [],0
.size touch_nmi_watchdog,.-touch_nmi_watchdog

104
arch/mn10300/kernel/mn10300-watchdog.c
Просмотреть файл

@ -30,7 +30,7 @@
static DEFINE_SPINLOCK(watchdog_print_lock);
static unsigned int watchdog;
static unsigned int watchdog_hz = 1;
unsigned int watchdog_alert_counter;
unsigned int watchdog_alert_counter[NR_CPUS];
EXPORT_SYMBOL(touch_nmi_watchdog);
@ -39,9 +39,6 @@ EXPORT_SYMBOL(touch_nmi_watchdog);
* is to check its timer makes IRQ counts. If they are not
* changing then that CPU has some problem.
*
* as these watchdog NMI IRQs are generated on every CPU, we only
* have to check the current processor.
*
* since NMIs dont listen to _any_ locks, we have to be extremely
* careful not to rely on unsafe variables. The printk might lock
* up though, so we have to break up any console locks first ...
@ -69,8 +66,8 @@ int __init check_watchdog(void)
printk(KERN_INFO "OK.\n");
/* now that we know it works we can reduce NMI frequency to
* something more reasonable; makes a difference in some configs
/* now that we know it works we can reduce NMI frequency to something
* more reasonable; makes a difference in some configs
*/
watchdog_hz = 1;
@ -121,15 +118,22 @@ void __init watchdog_go(void)
}
}
#ifdef CONFIG_SMP
static void watchdog_dump_register(void *dummy)
{
printk(KERN_ERR "--- Register Dump (CPU%d) ---\n", CPUID);
show_registers(current_frame());
}
#endif
asmlinkage
void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
{
/*
* Since current-> is always on the stack, and we always switch
* the stack NMI-atomically, it's safe to use smp_processor_id().
*/
int sum, cpu = smp_processor_id();
int sum, cpu;
int irq = NMIIRQ;
u8 wdt, tmp;
@ -138,43 +142,61 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
tmp = WDCTR;
NMICR = NMICR_WDIF;
nmi_count(cpu)++;
nmi_count(smp_processor_id())++;
kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
sum = irq_stat[cpu].__irq_count;
if (last_irq_sums[cpu] == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
watchdog_alert_counter++;
if (watchdog_alert_counter == 5 * watchdog_hz) {
spin_lock(&watchdog_print_lock);
/*
* We are in trouble anyway, lets at least try
* to get a message out.
*/
bust_spinlocks(1);
printk(KERN_ERR
"NMI Watchdog detected LOCKUP on CPU%d,"
" pc %08lx, registers:\n",
cpu, regs->pc);
show_registers(regs);
printk("console shuts up ...\n");
console_silent();
spin_unlock(&watchdog_print_lock);
bust_spinlocks(0);
#ifdef CONFIG_GDBSTUB
if (gdbstub_busy)
gdbstub_exception(regs, excep);
else
gdbstub_intercept(regs, excep);
for_each_online_cpu(cpu) {
sum = irq_stat[cpu].__irq_count;
if ((last_irq_sums[cpu] == sum)
#if defined(CONFIG_GDBSTUB) && defined(CONFIG_SMP)
&& !(CHK_GDBSTUB_BUSY()
|| atomic_read(&cpu_doing_single_step))
#endif
do_exit(SIGSEGV);
) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
watchdog_alert_counter[cpu]++;
if (watchdog_alert_counter[cpu] == 5 * watchdog_hz) {
spin_lock(&watchdog_print_lock);
/*
* We are in trouble anyway, lets at least try
* to get a message out.
*/
bust_spinlocks(1);
printk(KERN_ERR
"NMI Watchdog detected LOCKUP on CPU%d,"
" pc %08lx, registers:\n",
cpu, regs->pc);
#ifdef CONFIG_SMP
printk(KERN_ERR
"--- Register Dump (CPU%d) ---\n",
CPUID);
#endif
show_registers(regs);
#ifdef CONFIG_SMP
smp_nmi_call_function(watchdog_dump_register,
NULL, 1);
#endif
printk(KERN_NOTICE "console shuts up ...\n");
console_silent();
spin_unlock(&watchdog_print_lock);
bust_spinlocks(0);
#ifdef CONFIG_GDBSTUB
if (CHK_GDBSTUB_BUSY_AND_ACTIVE())
gdbstub_exception(regs, excep);
else
gdbstub_intercept(regs, excep);
#endif
do_exit(SIGSEGV);
}
} else {
last_irq_sums[cpu] = sum;
watchdog_alert_counter[cpu] = 0;
}
} else {
last_irq_sums[cpu] = sum;
watchdog_alert_counter = 0;
}
WDCTR = wdt | WDCTR_WDRST;

61
arch/mn10300/kernel/process.c
Просмотреть файл

@ -57,6 +57,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
#if !defined(CONFIG_SMP) || defined(CONFIG_HOTPLUG_CPU)
/*
* we use this if we don't have any better idle routine
*/
@ -69,6 +70,35 @@ static void default_idle(void)
local_irq_enable();
}
#else /* !CONFIG_SMP || CONFIG_HOTPLUG_CPU */
/*
* On SMP it's slightly faster (but much more power-consuming!)
* to poll the ->work.need_resched flag instead of waiting for the
* cross-CPU IPI to arrive. Use this option with caution.
*/
static inline void poll_idle(void)
{
int oldval;
local_irq_enable();
/*
* Deal with another CPU just having chosen a thread to
* run here:
*/
oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED);
if (!oldval) {
set_thread_flag(TIF_POLLING_NRFLAG);
while (!need_resched())
cpu_relax();
clear_thread_flag(TIF_POLLING_NRFLAG);
} else {
set_need_resched();
}
}
#endif /* !CONFIG_SMP || CONFIG_HOTPLUG_CPU */
/*
* the idle thread
* - there's no useful work to be done, so just try to conserve power and have
@ -77,8 +107,6 @@ static void default_idle(void)
*/
void cpu_idle(void)
{
int cpu = smp_processor_id();
/* endless idle loop with no priority at all */
for (;;) {
while (!need_resched()) {
@ -86,10 +114,13 @@ void cpu_idle(void)
smp_rmb();
idle = pm_idle;
if (!idle)
if (!idle) {
#if defined(CONFIG_SMP) && !defined(CONFIG_HOTPLUG_CPU)
idle = poll_idle;
#else /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */
idle = default_idle;
irq_stat[cpu].idle_timestamp = jiffies;
#endif /* CONFIG_SMP && !CONFIG_HOTPLUG_CPU */
}
idle();
}
@ -197,6 +228,7 @@ int copy_thread(unsigned long clone_flags,
unsigned long c_usp, unsigned long ustk_size,
struct task_struct *p, struct pt_regs *kregs)
{
struct thread_info *ti = task_thread_info(p);
struct pt_regs *c_uregs, *c_kregs, *uregs;
unsigned long c_ksp;
@ -217,7 +249,7 @@ int copy_thread(unsigned long clone_flags,
/* the new TLS pointer is passed in as arg #5 to sys_clone() */
if (clone_flags & CLONE_SETTLS)
c_uregs->e2 = __frame->d3;
c_uregs->e2 = current_frame()->d3;
/* set up the return kernel frame if called from kernel_thread() */
c_kregs = c_uregs;
@ -235,7 +267,7 @@ int copy_thread(unsigned long clone_flags,
}
/* set up things up so the scheduler can start the new task */
p->thread.__frame = c_kregs;
ti->frame = c_kregs;
p->thread.a3 = (unsigned long) c_kregs;
p->thread.sp = c_ksp;
p->thread.pc = (unsigned long) ret_from_fork;
@ -247,25 +279,26 @@ int copy_thread(unsigned long clone_flags,
/*
* clone a process
* - tlsptr is retrieved by copy_thread() from __frame->d3
* - tlsptr is retrieved by copy_thread() from current_frame()->d3
*/
asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
int __user *parent_tidptr, int __user *child_tidptr,
int __user *tlsptr)
{
return do_fork(clone_flags, newsp ?: __frame->sp, __frame, 0,
parent_tidptr, child_tidptr);
return do_fork(clone_flags, newsp ?: current_frame()->sp,
current_frame(), 0, parent_tidptr, child_tidptr);
}
asmlinkage long sys_fork(void)
{
return do_fork(SIGCHLD, __frame->sp, __frame, 0, NULL, NULL);
return do_fork(SIGCHLD, current_frame()->sp,
current_frame(), 0, NULL, NULL);
}
asmlinkage long sys_vfork(void)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, __frame->sp, __frame,
0, NULL, NULL);
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, current_frame()->sp,
current_frame(), 0, NULL, NULL);
}
asmlinkage long sys_execve(const char __user *name,
@ -279,7 +312,7 @@ asmlinkage long sys_execve(const char __user *name,
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
error = do_execve(filename, argv, envp, __frame);
error = do_execve(filename, argv, envp, current_frame());
putname(filename);
return error;
}

2
arch/mn10300/kernel/profile.c
Просмотреть файл

@ -41,7 +41,7 @@ static __init int profile_init(void)
tmp = TM11ICR;
printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n",
mn10300_ioclk / 8 / (TM11BR + 1));
MN10300_IOCLK / 8 / (TM11BR + 1));
printk(KERN_INFO "Profile histogram stored %p-%p\n",
prof_buffer, (u8 *)(prof_buffer + prof_len) - 1);

41
arch/mn10300/kernel/rtc.c
Просмотреть файл

@ -20,18 +20,22 @@
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
/* time for RTC to update itself in ioclks */
static unsigned long mn10300_rtc_update_period;
/*
* Read the current RTC time
*/
void read_persistent_clock(struct timespec *ts)
{
struct rtc_time tm;
get_rtc_time(&tm);
ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
ts->tv_nsec = 0;
ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
/* if rtc is way off in the past, set something reasonable */
if (ts->tv_sec < 0)
ts->tv_sec = mktime(2009, 1, 1, 12, 0, 0);
}
/*
@ -115,39 +119,14 @@ int update_persistent_clock(struct timespec now)
*/
void __init calibrate_clock(void)
{
unsigned long count0, counth, count1;
unsigned char status;
/* make sure the RTC is running and is set to operate in 24hr mode */
status = RTSRC;
RTCRB |= RTCRB_SET;
RTCRB |= RTCRB_TM_24HR;
RTCRB &= ~RTCRB_DM_BINARY;
RTCRA |= RTCRA_DVR;
RTCRA &= ~RTCRA_DVR;
RTCRB &= ~RTCRB_SET;
/* work out the clock speed by counting clock cycles between ends of
* the RTC update cycle - track the RTC through one complete update
* cycle (1 second)
*/
startup_timestamp_counter();
while (!(RTCRA & RTCRA_UIP)) {}
while ((RTCRA & RTCRA_UIP)) {}
count0 = TMTSCBC;
while (!(RTCRA & RTCRA_UIP)) {}
counth = TMTSCBC;
while ((RTCRA & RTCRA_UIP)) {}
count1 = TMTSCBC;
shutdown_timestamp_counter();
MN10300_TSCCLK = count0 - count1; /* the timers count down */
mn10300_rtc_update_period = counth - count1;
MN10300_TSC_PER_HZ = MN10300_TSCCLK / HZ;
}

83
arch/mn10300/kernel/setup.c
Просмотреть файл

@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
#include <asm/processor.h>
#include <linux/console.h>
#include <asm/uaccess.h>
@ -30,7 +31,6 @@
#include <asm/io.h>
#include <asm/smp.h>
#include <proc/proc.h>
#include <asm/busctl-regs.h>
#include <asm/fpu.h>
#include <asm/sections.h>
@ -64,11 +64,13 @@ unsigned long memory_size;
struct thread_info *__current_ti = &init_thread_union.thread_info;
struct task_struct *__current = &init_task;
#define mn10300_known_cpus 3
#define mn10300_known_cpus 5
static const char *const mn10300_cputypes[] = {
"am33v1",
"am33v2",
"am34v1",
"am33-1",
"am33-2",
"am34-1",
"am33-3",
"am34-2",
"unknown"
};
@ -123,6 +125,7 @@ void __init setup_arch(char **cmdline_p)
cpu_init();
unit_setup();
smp_init_cpus();
parse_mem_cmdline(cmdline_p);
init_mm.start_code = (unsigned long)&_text;
@ -179,57 +182,55 @@ void __init setup_arch(char **cmdline_p)
void __init cpu_init(void)
{
unsigned long cpurev = CPUREV, type;
unsigned long base, size;
type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
if (type > mn10300_known_cpus)
type = mn10300_known_cpus;
printk(KERN_INFO "Matsushita %s, rev %ld\n",
printk(KERN_INFO "Panasonic %s, rev %ld\n",
mn10300_cputypes[type],
(cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S);
/* determine the memory size and base from the memory controller regs */
memory_size = 0;
base = SDBASE(0);
if (base & SDBASE_CE) {
size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
size = ~size + 1;
base &= SDBASE_CBA;
printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base);
memory_size += size;
phys_memory_base = base;
}
base = SDBASE(1);
if (base & SDBASE_CE) {
size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
size = ~size + 1;
base &= SDBASE_CBA;
printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base);
memory_size += size;
if (phys_memory_base == 0)
phys_memory_base = base;
}
get_mem_info(&phys_memory_base, &memory_size);
phys_memory_end = phys_memory_base + memory_size;
#ifdef CONFIG_FPU
fpu_init_state();
#endif
}
static struct cpu cpu_devices[NR_CPUS];
static int __init topology_init(void)
{
int i;
for_each_present_cpu(i)
register_cpu(&cpu_devices[i], i);
return 0;
}
subsys_initcall(topology_init);
/*
* Get CPU information for use by the procfs.
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
#ifdef CONFIG_SMP
struct mn10300_cpuinfo *c = v;
unsigned long cpu_id = c - cpu_data;
unsigned long cpurev = c->type, type, icachesz, dcachesz;
#else /* CONFIG_SMP */
unsigned long cpu_id = 0;
unsigned long cpurev = CPUREV, type, icachesz, dcachesz;
#endif /* CONFIG_SMP */
type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
#ifdef CONFIG_SMP
if (!cpu_online(cpu_id))
return 0;
#endif
type = (cpurev & CPUREV_TYPE) >> CPUREV_TYPE_S;
if (type > mn10300_known_cpus)
type = mn10300_known_cpus;
@ -244,13 +245,14 @@ static int show_cpuinfo(struct seq_file *m, void *v)
1024;
seq_printf(m,
"processor : 0\n"
"vendor_id : Matsushita\n"
"processor : %ld\n"
"vendor_id : " PROCESSOR_VENDOR_NAME "\n"
"cpu core : %s\n"
"cpu rev : %lu\n"
"model name : " PROCESSOR_MODEL_NAME "\n"
"icache size: %lu\n"
"dcache size: %lu\n",
cpu_id,
mn10300_cputypes[type],
(cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S,
icachesz,
@ -262,8 +264,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
"bogomips : %lu.%02lu\n\n",
MN10300_IOCLK / 1000000,
(MN10300_IOCLK / 10000) % 100,
#ifdef CONFIG_SMP
c->loops_per_jiffy / (500000 / HZ),
(c->loops_per_jiffy / (5000 / HZ)) % 100
#else /* CONFIG_SMP */
loops_per_jiffy / (500000 / HZ),
(loops_per_jiffy / (5000 / HZ)) % 100
#endif /* CONFIG_SMP */
);
return 0;

20
arch/mn10300/kernel/signal.c
Просмотреть файл

@ -91,7 +91,7 @@ asmlinkage long sys_sigaction(int sig,
*/
asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t *uoss)
{
return do_sigaltstack(uss, uoss, __frame->sp);
return do_sigaltstack(uss, uoss, current_frame()->sp);
}
/*
@ -156,10 +156,11 @@ badframe:
*/
asmlinkage long sys_sigreturn(void)
{
struct sigframe __user *frame = (struct sigframe __user *) __frame->sp;
struct sigframe __user *frame;
sigset_t set;
long d0;
frame = (struct sigframe __user *) current_frame()->sp;
if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__get_user(set.sig[0], &frame->sc.oldmask))
@ -176,7 +177,7 @@ asmlinkage long sys_sigreturn(void)
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(__frame, &frame->sc, &d0))
if (restore_sigcontext(current_frame(), &frame->sc, &d0))
goto badframe;
return d0;
@ -191,11 +192,11 @@ badframe:
*/
asmlinkage long sys_rt_sigreturn(void)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *) __frame->sp;
struct rt_sigframe __user *frame;
sigset_t set;
unsigned long d0;
long d0;
frame = (struct rt_sigframe __user *) current_frame()->sp;
if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
@ -207,10 +208,11 @@ asmlinkage long sys_rt_sigreturn(void)
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(__frame, &frame->uc.uc_mcontext, &d0))
if (restore_sigcontext(current_frame(), &frame->uc.uc_mcontext, &d0))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, __frame->sp) == -EFAULT)
if (do_sigaltstack(&frame->uc.uc_stack, NULL, current_frame()->sp) ==
-EFAULT)
goto badframe;
return d0;
@ -572,7 +574,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(__frame);
tracehook_notify_resume(current_frame());
if (current->replacement_session_keyring)
key_replace_session_keyring();
}

97
arch/mn10300/kernel/smp-low.S Normal file
Просмотреть файл

@ -0,0 +1,97 @@
/* SMP IPI low-level handler
*
* Copyright (C) 2006-2007 Matsushita Electric Industrial Co., Ltd.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/thread_info.h>
#include <asm/cpu-regs.h>
#include <proc/smp-regs.h>
#include <asm/asm-offsets.h>
#include <asm/frame.inc>
.am33_2
###############################################################################
#
# IPI interrupt handler
#
###############################################################################
.globl mn10300_low_ipi_handler
mn10300_low_ipi_handler:
add -4,sp
mov d0,(sp)
movhu (IAGR),d0
and IAGR_GN,d0
lsr 0x2,d0
#ifdef CONFIG_MN10300_CACHE_ENABLED
cmp FLUSH_CACHE_IPI,d0
beq mn10300_flush_cache_ipi
#endif
cmp SMP_BOOT_IRQ,d0
beq mn10300_smp_boot_ipi
/* OTHERS */
mov (sp),d0
add 4,sp
#ifdef CONFIG_GDBSTUB
jmp gdbstub_io_rx_handler
#else
jmp end
#endif
###############################################################################
#
# Cache flush IPI interrupt handler
#
###############################################################################
#ifdef CONFIG_MN10300_CACHE_ENABLED
mn10300_flush_cache_ipi:
mov (sp),d0
add 4,sp
/* FLUSH_CACHE_IPI */
add -4,sp
SAVE_ALL
mov GxICR_DETECT,d2
movbu d2,(GxICR(FLUSH_CACHE_IPI)) # ACK the interrupt
movhu (GxICR(FLUSH_CACHE_IPI)),d2
call smp_cache_interrupt[],0
RESTORE_ALL
jmp end
#endif
###############################################################################
#
# SMP boot CPU IPI interrupt handler
#
###############################################################################
mn10300_smp_boot_ipi:
/* clear interrupt */
movhu (GxICR(SMP_BOOT_IRQ)),d0
and ~GxICR_REQUEST,d0
movhu d0,(GxICR(SMP_BOOT_IRQ))
mov (sp),d0
add 4,sp
# get stack
mov (CPUID),a0
add -1,a0
add a0,a0
add a0,a0
mov (start_stack,a0),a0
mov a0,sp
jmp initialize_secondary
# Jump here after RTI to suppress the icache lookahead
end:

1152
arch/mn10300/kernel/smp.c Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

7
arch/mn10300/kernel/switch_to.S
Просмотреть файл

@ -15,6 +15,9 @@
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/cpu-regs.h>
#ifdef CONFIG_SMP
#include <proc/smp-regs.h>
#endif /* CONFIG_SMP */
.text
@ -35,8 +38,6 @@ ENTRY(__switch_to)
mov d1,a1
# save prev context
mov (__frame),d0
mov d0,(THREAD_FRAME,a0)
mov __switch_back,d0
mov d0,(THREAD_PC,a0)
mov sp,a2
@ -58,8 +59,6 @@ ENTRY(__switch_to)
mov a2,e2
#endif
mov (THREAD_FRAME,a1),a2
mov a2,(__frame)
mov (THREAD_PC,a1),a2
mov d2,d0 # for ret_from_fork
mov d0,a0 # for __switch_to

114
arch/mn10300/kernel/time.c
Просмотреть файл

@ -17,29 +17,18 @@
#include <linux/smp.h>
#include <linux/profile.h>
#include <linux/cnt32_to_63.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#include <asm/rtc.h>
#ifdef CONFIG_MN10300_RTC
unsigned long mn10300_ioclk; /* system I/O clock frequency */
unsigned long mn10300_iobclk; /* system I/O clock frequency */
unsigned long mn10300_tsc_per_HZ; /* number of ioclks per jiffy */
#endif /* CONFIG_MN10300_RTC */
#include "internal.h"
static unsigned long mn10300_last_tsc; /* time-stamp counter at last time
* interrupt occurred */
static irqreturn_t timer_interrupt(int irq, void *dev_id);
static struct irqaction timer_irq = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
.name = "timer",
};
static unsigned long sched_clock_multiplier;
/*
@ -54,9 +43,12 @@ unsigned long long sched_clock(void)
unsigned long tsc, tmp;
unsigned product[3]; /* 96-bit intermediate value */
/* cnt32_to_63() is not safe with preemption */
preempt_disable();
/* read the TSC value
*/
tsc = 0 - get_cycles(); /* get_cycles() counts down */
tsc = get_cycles();
/* expand to 64-bits.
* - sched_clock() must be called once a minute or better or the
@ -64,6 +56,8 @@ unsigned long long sched_clock(void)
*/
tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
preempt_enable();
/* scale the 64-bit TSC value to a nanosecond value via a 96-bit
* intermediate
*/
@ -90,6 +84,20 @@ static void __init mn10300_sched_clock_init(void)
__muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK);
}
/**
* local_timer_interrupt - Local timer interrupt handler
*
* Handle local timer interrupts for this CPU. They may have been propagated
* to this CPU from the CPU that actually gets them by way of an IPI.
*/
irqreturn_t local_timer_interrupt(void)
{
profile_tick(CPU_PROFILING);
update_process_times(user_mode(get_irq_regs()));
return IRQ_HANDLED;
}
#ifndef CONFIG_GENERIC_TIME
/*
* advance the kernel's time keeping clocks (xtime and jiffies)
* - we use Timer 0 & 1 cascaded as a clock to nudge us the next time
@ -98,28 +106,74 @@ static void __init mn10300_sched_clock_init(void)
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
unsigned tsc, elapse;
irqreturn_t ret;
write_seqlock(&xtime_lock);
while (tsc = get_cycles(),
elapse = mn10300_last_tsc - tsc, /* time elapsed since last
elapse = tsc - mn10300_last_tsc, /* time elapsed since last
* tick */
elapse > MN10300_TSC_PER_HZ
) {
mn10300_last_tsc -= MN10300_TSC_PER_HZ;
mn10300_last_tsc += MN10300_TSC_PER_HZ;
/* advance the kernel's time tracking system */
profile_tick(CPU_PROFILING);
do_timer(1);
}
write_sequnlock(&xtime_lock);
update_process_times(user_mode(get_irq_regs()));
return IRQ_HANDLED;
ret = local_timer_interrupt();
#ifdef CONFIG_SMP
send_IPI_allbutself(LOCAL_TIMER_IPI);
#endif
return ret;
}
static struct irqaction timer_irq = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
.name = "timer",
};
#endif /* CONFIG_GENERIC_TIME */
#ifdef CONFIG_CSRC_MN10300
void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
{
u64 temp;
u32 shift;
/* Find a shift value */
for (shift = 32; shift > 0; shift--) {
temp = (u64) NSEC_PER_SEC << shift;
do_div(temp, clock);
if ((temp >> 32) == 0)
break;
}
cs->shift = shift;
cs->mult = (u32) temp;
}
#endif
#if CONFIG_CEVT_MN10300
void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
unsigned int clock)
{
u64 temp;
u32 shift;
/* Find a shift value */
for (shift = 32; shift > 0; shift--) {
temp = (u64) clock << shift;
do_div(temp, NSEC_PER_SEC);
if ((temp >> 32) == 0)
break;
}
cd->shift = shift;
cd->mult = (u32) temp;
}
#endif
/*
* initialise the various timers used by the main part of the kernel
*/
@ -131,21 +185,25 @@ void __init time_init(void)
*/
TMPSCNT |= TMPSCNT_ENABLE;
#ifdef CONFIG_GENERIC_TIME
init_clocksource();
#else
startup_timestamp_counter();
#endif
printk(KERN_INFO
"timestamp counter I/O clock running at %lu.%02lu"
" (calibrated against RTC)\n",
MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100);
mn10300_last_tsc = TMTSCBC;
mn10300_last_tsc = read_timestamp_counter();
/* use timer 0 & 1 cascaded to tick at as close to HZ as possible */
setup_irq(TMJCIRQ, &timer_irq);
set_intr_level(TMJCIRQ, TMJCICR_LEVEL);
startup_jiffies_counter();
#ifdef CONFIG_GENERIC_CLOCKEVENTS
init_clockevents();
#else
reload_jiffies_counter(MN10300_JC_PER_HZ - 1);
setup_jiffies_interrupt(TMJCIRQ, &timer_irq, CONFIG_TIMER_IRQ_LEVEL);
#endif
#ifdef CONFIG_MN10300_WD_TIMER
/* start the watchdog timer */

42
arch/mn10300/kernel/traps.c
Просмотреть файл

@ -45,9 +45,6 @@
#error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!"
#endif
struct pt_regs *__frame; /* current frame pointer */
EXPORT_SYMBOL(__frame);
int kstack_depth_to_print = 24;
spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock);
@ -101,7 +98,6 @@ DO_EINFO(SIGILL, {}, "invalid opcode", invalid_op, ILL_ILLOPC);
DO_EINFO(SIGILL, {}, "invalid ex opcode", invalid_exop, ILL_ILLOPC);
DO_EINFO(SIGBUS, {}, "invalid address", mem_error, BUS_ADRERR);
DO_EINFO(SIGBUS, {}, "bus error", bus_error, BUS_ADRERR);
DO_EINFO(SIGILL, {}, "FPU invalid opcode", fpu_invalid_op, ILL_COPROC);
DO_ERROR(SIGTRAP,
#ifndef CONFIG_MN10300_USING_JTAG
@ -222,11 +218,14 @@ void show_registers_only(struct pt_regs *regs)
printk(KERN_EMERG "threadinfo=%p task=%p)\n",
current_thread_info(), current);
if ((unsigned long) current >= 0x90000000UL &&
(unsigned long) current < 0x94000000UL)
if ((unsigned long) current >= PAGE_OFFSET &&
(unsigned long) current < (unsigned long)high_memory)
printk(KERN_EMERG "Process %s (pid: %d)\n",
current->comm, current->pid);
#ifdef CONFIG_SMP
printk(KERN_EMERG "CPUID: %08x\n", CPUID);
#endif
printk(KERN_EMERG "CPUP: %04hx\n", CPUP);
printk(KERN_EMERG "TBR: %08x\n", TBR);
printk(KERN_EMERG "DEAR: %08x\n", DEAR);
@ -522,8 +521,12 @@ void __init set_intr_stub(enum exception_code code, void *handler)
{
unsigned long addr;
u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
unsigned long flags;
addr = (unsigned long) handler - (unsigned long) vector;
flags = arch_local_cli_save();
vector[0] = 0xdc; /* JMP handler */
vector[1] = addr;
vector[2] = addr >> 8;
@ -533,30 +536,12 @@ void __init set_intr_stub(enum exception_code code, void *handler)
vector[6] = 0xcb;
vector[7] = 0xcb;
arch_local_irq_restore(flags);
#ifndef CONFIG_MN10300_CACHE_SNOOP
mn10300_dcache_flush_inv();
mn10300_icache_inv();
}
/*
* set an interrupt stub to invoke the JTAG unit and then jump to a handler
*/
void __init set_jtag_stub(enum exception_code code, void *handler)
{
unsigned long addr;
u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
addr = (unsigned long) handler - ((unsigned long) vector + 1);
vector[0] = 0xff; /* PI to jump into JTAG debugger */
vector[1] = 0xdc; /* jmp handler */
vector[2] = addr;
vector[3] = addr >> 8;
vector[4] = addr >> 16;
vector[5] = addr >> 24;
vector[6] = 0xcb;
vector[7] = 0xcb;
mn10300_dcache_flush_inv();
flush_icache_range((unsigned long) vector, (unsigned long) vector + 8);
#endif
}
/*
@ -581,7 +566,6 @@ void __init trap_init(void)
set_excp_vector(EXCEP_PRIVINSACC, insn_acc_error);
set_excp_vector(EXCEP_PRIVDATACC, data_acc_error);
set_excp_vector(EXCEP_DATINSACC, insn_acc_error);
set_excp_vector(EXCEP_FPU_DISABLED, fpu_disabled);
set_excp_vector(EXCEP_FPU_UNIMPINS, fpu_invalid_op);
set_excp_vector(EXCEP_FPU_OPERATION, fpu_exception);

4
arch/mn10300/lib/bitops.c
Просмотреть файл

@ -15,7 +15,7 @@
/*
* try flipping a bit using BSET and BCLR
*/
void change_bit(int nr, volatile void *addr)
void change_bit(unsigned long nr, volatile void *addr)
{
if (test_bit(nr, addr))
goto try_clear_bit;
@ -34,7 +34,7 @@ try_clear_bit:
/*
* try flipping a bit using BSET and BCLR and returning the old value
*/
int test_and_change_bit(int nr, volatile void *addr)
int test_and_change_bit(unsigned long nr, volatile void *addr)
{
if (test_bit(nr, addr))
goto try_clear_bit;

8
arch/mn10300/lib/delay.c
Просмотреть файл

@ -38,14 +38,14 @@ EXPORT_SYMBOL(__delay);
*/
void __udelay(unsigned long usecs)
{
signed long ioclk, stop;
unsigned long start, stop, cnt;
/* usecs * CLK / 1E6 */
stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000);
stop = TMTSCBC - stop;
start = TMTSCBC;
do {
ioclk = TMTSCBC;
} while (stop < ioclk);
cnt = start - TMTSCBC;
} while (cnt < stop);
}
EXPORT_SYMBOL(__udelay);

49
arch/mn10300/lib/do_csum.S
Просмотреть файл

@ -10,26 +10,25 @@
*/
#include <asm/cache.h>
.section .text
.balign L1_CACHE_BYTES
.section .text
.balign L1_CACHE_BYTES
###############################################################################
#
# unsigned int do_csum(const unsigned char *buff, size_t len)
# unsigned int do_csum(const unsigned char *buff, int len)
#
###############################################################################
.globl do_csum
.type do_csum,@function
.type do_csum,@function
do_csum:
movm [d2,d3],(sp)
mov d0,(12,sp)
mov d1,(16,sp)
mov d1,d2 # count
mov d0,a0 # buff
mov a0,a1
clr d1 # accumulator
cmp +0,d2
beq do_csum_done # return if zero-length buffer
ble do_csum_done # check for zero length or negative
# 4-byte align the buffer pointer
btst +3,a0
@ -41,17 +40,15 @@ do_csum:
inc a0
asl +8,d0
add d0,d1
addc +0,d1
add -1,d2
do_csum_addr_not_odd:
do_csum_addr_not_odd:
cmp +2,d2
bcs do_csum_fewer_than_4
btst +2,a0
beq do_csum_now_4b_aligned
movhu (a0+),d0
add d0,d1
addc +0,d1
add -2,d2
cmp +4,d2
bcs do_csum_fewer_than_4
@ -66,20 +63,20 @@ do_csum_now_4b_aligned:
do_csum_loop:
mov (a0+),d0
add d0,d1
mov (a0+),e0
addc e0,d1
mov (a0+),e1
addc e1,d1
mov (a0+),e3
add d0,d1
addc e0,d1
addc e1,d1
addc e3,d1
mov (a0+),d0
addc d0,d1
mov (a0+),e0
addc e0,d1
mov (a0+),e1
addc e1,d1
mov (a0+),e3
addc d0,d1
addc e0,d1
addc e1,d1
addc e3,d1
addc +0,d1
@ -94,12 +91,12 @@ do_csum_remainder:
cmp +16,d2
bcs do_csum_fewer_than_16
mov (a0+),d0
add d0,d1
mov (a0+),e0
addc e0,d1
mov (a0+),e1
addc e1,d1
mov (a0+),e3
add d0,d1
addc e0,d1
addc e1,d1
addc e3,d1
addc +0,d1
add -16,d2
@ -131,9 +128,9 @@ do_csum_fewer_than_4:
xor_cmp d0,d0,+2,d2
bcs do_csum_fewer_than_2
movhu (a0+),d0
do_csum_fewer_than_2:
and +1,d2
beq do_csum_add_last_bit
do_csum_fewer_than_2:
movbu (a0),d3
add d3,d0
do_csum_add_last_bit:
@ -142,21 +139,19 @@ do_csum_add_last_bit:
do_csum_done:
# compress the checksum down to 16 bits
mov +0xffff0000,d2
and d1,d2
mov +0xffff0000,d0
and d1,d0
asl +16,d1
add d2,d1,d0
add d1,d0
addc +0xffff,d0
lsr +16,d0
# flip the halves of the word result if the buffer was oddly aligned
mov (12,sp),d1
and +1,d1
and +1,a1
beq do_csum_not_oddly_aligned
swaph d0,d0 # exchange bits 15:8 with 7:0
do_csum_not_oddly_aligned:
ret [d2,d3],8
do_csum_end:
.size do_csum, do_csum_end-do_csum
.size do_csum, .-do_csum

101
arch/mn10300/mm/Kconfig.cache Normal file
Просмотреть файл

@ -0,0 +1,101 @@
#
# MN10300 CPU cache options
#
choice
prompt "CPU Caching mode"
default MN10300_CACHE_WBACK
help
This option determines the caching mode for the kernel.
Write-Back caching mode involves the all reads and writes causing
the affected cacheline to be read into the cache first before being
operated upon. Memory is not then updated by a write until the cache
is filled and a cacheline needs to be displaced from the cache to
make room. Only at that point is it written back.
Write-Through caching only fetches cachelines from memory on a
read. Writes always get written directly to memory. If the affected
cacheline is also in cache, it will be updated too.
The final option is to turn of caching entirely.
config MN10300_CACHE_WBACK
bool "Write-Back"
help
The dcache operates in delayed write-back mode. It must be manually
flushed if writes are made that subsequently need to be executed or
to be DMA'd by a device.
config MN10300_CACHE_WTHRU
bool "Write-Through"
help
The dcache operates in immediate write-through mode. Writes are
committed to RAM immediately in addition to being stored in the
cache. This means that the written data is immediately available for
execution or DMA.
This is not available for use with an SMP kernel if cache flushing
and invalidation by automatic purge register is not selected.
config MN10300_CACHE_DISABLED
bool "Disabled"
help
The icache and dcache are disabled.
endchoice
config MN10300_CACHE_ENABLED
def_bool y if !MN10300_CACHE_DISABLED
choice
prompt "CPU cache flush/invalidate method"
default MN10300_CACHE_MANAGE_BY_TAG if !AM34_2
default MN10300_CACHE_MANAGE_BY_REG if AM34_2
depends on MN10300_CACHE_ENABLED
help
This determines the method by which CPU cache flushing and
invalidation is performed.
config MN10300_CACHE_MANAGE_BY_TAG
bool "Use the cache tag registers directly"
depends on !(SMP && MN10300_CACHE_WTHRU)
config MN10300_CACHE_MANAGE_BY_REG
bool "Flush areas by way of automatic purge registers (AM34 only)"
depends on AM34_2
endchoice
config MN10300_CACHE_INV_BY_TAG
def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_ENABLED
config MN10300_CACHE_INV_BY_REG
def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_ENABLED
config MN10300_CACHE_FLUSH_BY_TAG
def_bool y if MN10300_CACHE_MANAGE_BY_TAG && MN10300_CACHE_WBACK
config MN10300_CACHE_FLUSH_BY_REG
def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_WBACK
config MN10300_HAS_CACHE_SNOOP
def_bool n
config MN10300_CACHE_SNOOP
bool "Use CPU Cache Snooping"
depends on MN10300_CACHE_ENABLED && MN10300_HAS_CACHE_SNOOP
default y
config MN10300_CACHE_FLUSH_ICACHE
def_bool y if MN10300_CACHE_WBACK && !MN10300_CACHE_SNOOP
help
Set if we need the dcache flushing before the icache is invalidated.
config MN10300_CACHE_INV_ICACHE
def_bool y if MN10300_CACHE_WTHRU && !MN10300_CACHE_SNOOP
help
Set if we need the icache to be invalidated, even if the dcache is in
write-through mode and doesn't need flushing.

14
arch/mn10300/mm/Makefile
Просмотреть файл

@ -2,11 +2,21 @@
# Makefile for the MN10300-specific memory management code
#
cacheflush-y := cache.o cache-mn10300.o
cacheflush-$(CONFIG_MN10300_CACHE_WBACK) += cache-flush-mn10300.o
cache-smp-wback-$(CONFIG_MN10300_CACHE_WBACK) := cache-smp-flush.o
cacheflush-y := cache.o
cacheflush-$(CONFIG_SMP) += cache-smp.o cache-smp-inv.o $(cache-smp-wback-y)
cacheflush-$(CONFIG_MN10300_CACHE_INV_ICACHE) += cache-inv-icache.o
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_ICACHE) += cache-flush-icache.o
cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o
cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_REG) += cache-flush-by-reg.o
cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
obj-y := \
init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
misalignment.o dma-alloc.o $(cacheflush-y)
obj-$(CONFIG_SMP) += tlb-smp.o

308
arch/mn10300/mm/cache-flush-by-reg.S Normal file
Просмотреть файл

@ -0,0 +1,308 @@
/* MN10300 CPU core caching routines, using indirect regs on cache controller
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/irqflags.h>
.am33_2
#ifndef CONFIG_SMP
.globl mn10300_dcache_flush
.globl mn10300_dcache_flush_page
.globl mn10300_dcache_flush_range
.globl mn10300_dcache_flush_range2
.globl mn10300_dcache_flush_inv
.globl mn10300_dcache_flush_inv_page
.globl mn10300_dcache_flush_inv_range
.globl mn10300_dcache_flush_inv_range2
mn10300_dcache_flush = mn10300_local_dcache_flush
mn10300_dcache_flush_page = mn10300_local_dcache_flush_page
mn10300_dcache_flush_range = mn10300_local_dcache_flush_range
mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2
mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv
mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page
mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range
mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2
#endif /* !CONFIG_SMP */
###############################################################################
#
# void mn10300_local_dcache_flush(void)
# Flush the entire data cache back to RAM
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush
.type mn10300_local_dcache_flush,@function
mn10300_local_dcache_flush:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_flush_end
mov DCPGCR,a0
LOCAL_CLI_SAVE(d1)
# wait for busy bit of area purge
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
# set mask
clr d0
mov d0,(DCPGMR)
# area purge
#
# DCPGCR = DCPGCR_DCP
#
mov DCPGCR_DCP,d0
mov d0,(a0)
# wait for busy bit of area purge
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
LOCAL_IRQ_RESTORE(d1)
mn10300_local_dcache_flush_end:
ret [],0
.size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush
###############################################################################
#
# void mn10300_local_dcache_flush_page(unsigned long start)
# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end)
# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size)
# Flush a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_page
.globl mn10300_local_dcache_flush_range
.globl mn10300_local_dcache_flush_range2
.type mn10300_local_dcache_flush_page,@function
.type mn10300_local_dcache_flush_range,@function
.type mn10300_local_dcache_flush_range2,@function
mn10300_local_dcache_flush_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_dcache_flush_range2:
add d0,d1
mn10300_local_dcache_flush_range:
movm [d2,d3,a2],(sp)
movhu (CHCTR),d2
btst CHCTR_DCEN,d2
beq mn10300_local_dcache_flush_range_end
# calculate alignsize
#
# alignsize = L1_CACHE_BYTES;
# for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1)
# alignsize <<= 1;
# d2 = alignsize;
#
mov L1_CACHE_BYTES,d2
sub d0,d1,d3
add -1,d3
lsr L1_CACHE_SHIFT,d3
beq 2f
1:
add d2,d2
lsr 1,d3
bne 1b
2:
mov d1,a1 # a1 = end
LOCAL_CLI_SAVE(d3)
mov DCPGCR,a0
# wait for busy bit of area purge
setlb
mov (a0),d1
btst DCPGCR_DCPGBSY,d1
lne
# determine the mask
mov d2,d1
add -1,d1
not d1 # d1 = mask = ~(alignsize-1)
mov d1,(DCPGMR)
and d1,d0,a2 # a2 = mask & start
dcpgloop:
# area purge
mov a2,d0
or DCPGCR_DCP,d0
mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCP
# wait for busy bit of area purge
setlb
mov (a0),d1
btst DCPGCR_DCPGBSY,d1
lne
# check purge of end address
add d2,a2 # a2 += alignsize
cmp a1,a2 # if (a2 < end) goto dcpgloop
bns dcpgloop
LOCAL_IRQ_RESTORE(d3)
mn10300_local_dcache_flush_range_end:
ret [d2,d3,a2],12
.size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page
.size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range
.size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2
###############################################################################
#
# void mn10300_local_dcache_flush_inv(void)
# Flush the entire data cache and invalidate all entries
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_inv
.type mn10300_local_dcache_flush_inv,@function
mn10300_local_dcache_flush_inv:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_flush_inv_end
mov DCPGCR,a0
LOCAL_CLI_SAVE(d1)
# wait for busy bit of area purge & invalidate
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
# set the mask to cover everything
clr d0
mov d0,(DCPGMR)
# area purge & invalidate
mov DCPGCR_DCP|DCPGCR_DCI,d0
mov d0,(a0)
# wait for busy bit of area purge & invalidate
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
LOCAL_IRQ_RESTORE(d1)
mn10300_local_dcache_flush_inv_end:
ret [],0
.size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv
###############################################################################
#
# void mn10300_local_dcache_flush_inv_page(unsigned long start)
# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end)
# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size)
# Flush and invalidate a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_inv_page
.globl mn10300_local_dcache_flush_inv_range
.globl mn10300_local_dcache_flush_inv_range2
.type mn10300_local_dcache_flush_inv_page,@function
.type mn10300_local_dcache_flush_inv_range,@function
.type mn10300_local_dcache_flush_inv_range2,@function
mn10300_local_dcache_flush_inv_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_dcache_flush_inv_range2:
add d0,d1
mn10300_local_dcache_flush_inv_range:
movm [d2,d3,a2],(sp)
movhu (CHCTR),d2
btst CHCTR_DCEN,d2
beq mn10300_local_dcache_flush_inv_range_end
# calculate alignsize
#
# alignsize = L1_CACHE_BYTES;
# for (i = (end - start - 1) / L1_CACHE_BYTES; i > 0; i >>= 1)
# alignsize <<= 1;
# d2 = alignsize
#
mov L1_CACHE_BYTES,d2
sub d0,d1,d3
add -1,d3
lsr L1_CACHE_SHIFT,d3
beq 2f
1:
add d2,d2
lsr 1,d3
bne 1b
2:
mov d1,a1 # a1 = end
LOCAL_CLI_SAVE(d3)
mov DCPGCR,a0
# wait for busy bit of area purge & invalidate
setlb
mov (a0),d1
btst DCPGCR_DCPGBSY,d1
lne
# set the mask
mov d2,d1
add -1,d1
not d1 # d1 = mask = ~(alignsize-1)
mov d1,(DCPGMR)
and d1,d0,a2 # a2 = mask & start
dcpgivloop:
# area purge & invalidate
mov a2,d0
or DCPGCR_DCP|DCPGCR_DCI,d0
mov d0,(a0) # DCPGCR = (mask & start)|DCPGCR_DCP|DCPGCR_DCI
# wait for busy bit of area purge & invalidate
setlb
mov (a0),d1
btst DCPGCR_DCPGBSY,d1
lne
# check purge & invalidate of end address
add d2,a2 # a2 += alignsize
cmp a1,a2 # if (a2 < end) goto dcpgivloop
bns dcpgivloop
LOCAL_IRQ_RESTORE(d3)
mn10300_local_dcache_flush_inv_range_end:
ret [d2,d3,a2],12
.size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page
.size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range
.size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2

251
arch/mn10300/mm/cache-flush-by-tag.S Normal file
Просмотреть файл

@ -0,0 +1,251 @@
/* MN10300 CPU core caching routines, using direct tag flushing
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/irqflags.h>
.am33_2
#ifndef CONFIG_SMP
.globl mn10300_dcache_flush
.globl mn10300_dcache_flush_page
.globl mn10300_dcache_flush_range
.globl mn10300_dcache_flush_range2
.globl mn10300_dcache_flush_inv
.globl mn10300_dcache_flush_inv_page
.globl mn10300_dcache_flush_inv_range
.globl mn10300_dcache_flush_inv_range2
mn10300_dcache_flush = mn10300_local_dcache_flush
mn10300_dcache_flush_page = mn10300_local_dcache_flush_page
mn10300_dcache_flush_range = mn10300_local_dcache_flush_range
mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2
mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv
mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page
mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range
mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2
#endif /* !CONFIG_SMP */
###############################################################################
#
# void mn10300_local_dcache_flush(void)
# Flush the entire data cache back to RAM
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush
.type mn10300_local_dcache_flush,@function
mn10300_local_dcache_flush:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_flush_end
# read the addresses tagged in the cache's tag RAM and attempt to flush
# those addresses specifically
# - we rely on the hardware to filter out invalid tag entry addresses
mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
mov DCACHE_PURGE(0,0),a1 # dcache purge request address
mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
mn10300_local_dcache_flush_loop:
mov (a0),d0
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
# cache
mov d0,(a1) # conditional purge
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
add -1,d1
bne mn10300_local_dcache_flush_loop
mn10300_local_dcache_flush_end:
ret [],0
.size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush
###############################################################################
#
# void mn10300_local_dcache_flush_page(unsigned long start)
# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end)
# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size)
# Flush a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_page
.globl mn10300_local_dcache_flush_range
.globl mn10300_local_dcache_flush_range2
.type mn10300_local_dcache_flush_page,@function
.type mn10300_local_dcache_flush_range,@function
.type mn10300_local_dcache_flush_range2,@function
mn10300_local_dcache_flush_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_dcache_flush_range2:
add d0,d1
mn10300_local_dcache_flush_range:
movm [d2],(sp)
movhu (CHCTR),d2
btst CHCTR_DCEN,d2
beq mn10300_local_dcache_flush_range_end
sub d0,d1,a0
cmp MN10300_DCACHE_FLUSH_BORDER,a0
ble 1f
movm (sp),[d2]
bra mn10300_local_dcache_flush
1:
# round start addr down
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
mov d0,a1
add L1_CACHE_BYTES,d1 # round end addr up
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
# write a request to flush all instances of an address from the cache
mov DCACHE_PURGE(0,0),a0
mov a1,d0
and L1_CACHE_TAG_ENTRY,d0
add d0,a0 # starting dcache purge control
# reg address
sub a1,d1
lsr L1_CACHE_SHIFT,d1 # total number of entries to
# examine
or L1_CACHE_TAG_VALID,a1 # retain valid entries in the
# cache
mn10300_local_dcache_flush_range_loop:
mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
# all ways
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
add -1,d1
bne mn10300_local_dcache_flush_range_loop
mn10300_local_dcache_flush_range_end:
ret [d2],4
.size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page
.size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range
.size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2
###############################################################################
#
# void mn10300_local_dcache_flush_inv(void)
# Flush the entire data cache and invalidate all entries
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_inv
.type mn10300_local_dcache_flush_inv,@function
mn10300_local_dcache_flush_inv:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_flush_inv_end
mov L1_CACHE_NENTRIES,d1
clr a1
mn10300_local_dcache_flush_inv_loop:
mov (DCACHE_PURGE_WAY0(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY1(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY2(0),a1),d0 # unconditional purge
mov (DCACHE_PURGE_WAY3(0),a1),d0 # unconditional purge
add L1_CACHE_BYTES,a1
add -1,d1
bne mn10300_local_dcache_flush_inv_loop
mn10300_local_dcache_flush_inv_end:
ret [],0
.size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv
###############################################################################
#
# void mn10300_local_dcache_flush_inv_page(unsigned long start)
# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end)
# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size)
# Flush and invalidate a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_inv_page
.globl mn10300_local_dcache_flush_inv_range
.globl mn10300_local_dcache_flush_inv_range2
.type mn10300_local_dcache_flush_inv_page,@function
.type mn10300_local_dcache_flush_inv_range,@function
.type mn10300_local_dcache_flush_inv_range2,@function
mn10300_local_dcache_flush_inv_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_dcache_flush_inv_range2:
add d0,d1
mn10300_local_dcache_flush_inv_range:
movm [d2],(sp)
movhu (CHCTR),d2
btst CHCTR_DCEN,d2
beq mn10300_local_dcache_flush_inv_range_end
sub d0,d1,a0
cmp MN10300_DCACHE_FLUSH_INV_BORDER,a0
ble 1f
movm (sp),[d2]
bra mn10300_local_dcache_flush_inv
1:
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
# addr down
mov d0,a1
add L1_CACHE_BYTES,d1 # round end addr up
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
# write a request to flush and invalidate all instances of an address
# from the cache
mov DCACHE_PURGE(0,0),a0
mov a1,d0
and L1_CACHE_TAG_ENTRY,d0
add d0,a0 # starting dcache purge control
# reg address
sub a1,d1
lsr L1_CACHE_SHIFT,d1 # total number of entries to
# examine
mn10300_local_dcache_flush_inv_range_loop:
mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
# in all ways
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
add -1,d1
bne mn10300_local_dcache_flush_inv_range_loop
mn10300_local_dcache_flush_inv_range_end:
ret [d2],4
.size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page
.size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range
.size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2

155
arch/mn10300/mm/cache-flush-icache.c Normal file
Просмотреть файл

@ -0,0 +1,155 @@
/* Flush dcache and invalidate icache when the dcache is in writeback mode
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/cacheflush.h>
#include <asm/smp.h>
#include "cache-smp.h"
/**
* flush_icache_page - Flush a page from the dcache and invalidate the icache
* @vma: The VMA the page is part of.
* @page: The page to be flushed.
*
* Write a page back from the dcache and invalidate the icache so that we can
* run code from it that we've just written into it
*/
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
{
unsigned long start = page_to_phys(page);
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_flush_page(start);
mn10300_local_icache_inv_page(start);
smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start, start + PAGE_SIZE);
smp_unlock_cache(flags);
}
EXPORT_SYMBOL(flush_icache_page);
/**
* flush_icache_page_range - Flush dcache and invalidate icache for part of a
* single page
* @start: The starting virtual address of the page part.
* @end: The ending virtual address of the page part.
*
* Flush the dcache and invalidate the icache for part of a single page, as
* determined by the virtual addresses given. The page must be in the paged
* area.
*/
static void flush_icache_page_range(unsigned long start, unsigned long end)
{
unsigned long addr, size, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
/* work out how much of the page to flush */
off = start & ~PAGE_MASK;
size = end - start;
/* get the physical address the page is mapped to from the page
* tables */
pgd = pgd_offset(current->mm, start);
if (!pgd || !pgd_val(*pgd))
return;
pud = pud_offset(pgd, start);
if (!pud || !pud_val(*pud))
return;
pmd = pmd_offset(pud, start);
if (!pmd || !pmd_val(*pmd))
return;
ppte = pte_offset_map(pmd, start);
if (!ppte)
return;
pte = *ppte;
pte_unmap(ppte);
if (pte_none(pte))
return;
page = pte_page(pte);
if (!page)
return;
addr = page_to_phys(page);
/* flush the dcache and invalidate the icache coverage on that
* region */
mn10300_local_dcache_flush_range2(addr + off, size);
mn10300_local_icache_inv_range2(addr + off, size);
smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start, end);
}
/**
* flush_icache_range - Globally flush dcache and invalidate icache for region
* @start: The starting virtual address of the region.
* @end: The ending virtual address of the region.
*
* This is used by the kernel to globally flush some code it has just written
* from the dcache back to RAM and then to globally invalidate the icache over
* that region so that that code can be run on all CPUs in the system.
*/
void flush_icache_range(unsigned long start, unsigned long end)
{
unsigned long start_page, end_page;
unsigned long flags;
flags = smp_lock_cache();
if (end > 0x80000000UL) {
/* addresses above 0xa0000000 do not go through the cache */
if (end > 0xa0000000UL) {
end = 0xa0000000UL;
if (start >= end)
goto done;
}
/* kernel addresses between 0x80000000 and 0x9fffffff do not
* require page tables, so we just map such addresses
* directly */
start_page = (start >= 0x80000000UL) ? start : 0x80000000UL;
mn10300_local_dcache_flush_range(start_page, end);
mn10300_local_icache_inv_range(start_page, end);
smp_cache_call(SMP_IDCACHE_INV_FLUSH_RANGE, start_page, end);
if (start_page == start)
goto done;
end = start_page;
}
start_page = start & PAGE_MASK;
end_page = (end - 1) & PAGE_MASK;
if (start_page == end_page) {
/* the first and last bytes are on the same page */
flush_icache_page_range(start, end);
} else if (start_page + 1 == end_page) {
/* split over two virtually contiguous pages */
flush_icache_page_range(start, end_page);
flush_icache_page_range(end_page, end);
} else {
/* more than 2 pages; just flush the entire cache */
mn10300_dcache_flush();
mn10300_icache_inv();
smp_cache_call(SMP_IDCACHE_INV_FLUSH, 0, 0);
}
done:
smp_unlock_cache(flags);
}
EXPORT_SYMBOL(flush_icache_range);

192
arch/mn10300/mm/cache-flush-mn10300.S
Просмотреть файл

@ -1,192 +0,0 @@
/* MN10300 CPU core caching routines
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/cache.h>
.am33_2
.globl mn10300_dcache_flush
.globl mn10300_dcache_flush_page
.globl mn10300_dcache_flush_range
.globl mn10300_dcache_flush_range2
.globl mn10300_dcache_flush_inv
.globl mn10300_dcache_flush_inv_page
.globl mn10300_dcache_flush_inv_range
.globl mn10300_dcache_flush_inv_range2
###############################################################################
#
# void mn10300_dcache_flush(void)
# Flush the entire data cache back to RAM
#
###############################################################################
ALIGN
mn10300_dcache_flush:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_dcache_flush_end
# read the addresses tagged in the cache's tag RAM and attempt to flush
# those addresses specifically
# - we rely on the hardware to filter out invalid tag entry addresses
mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
mov DCACHE_PURGE(0,0),a1 # dcache purge request address
mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
mn10300_dcache_flush_loop:
mov (a0),d0
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
# cache
mov d0,(a1) # conditional purge
mn10300_dcache_flush_skip:
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
add -1,d1
bne mn10300_dcache_flush_loop
mn10300_dcache_flush_end:
ret [],0
###############################################################################
#
# void mn10300_dcache_flush_page(unsigned start)
# void mn10300_dcache_flush_range(unsigned start, unsigned end)
# void mn10300_dcache_flush_range2(unsigned start, unsigned size)
# Flush a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
mn10300_dcache_flush_page:
mov PAGE_SIZE,d1
mn10300_dcache_flush_range2:
add d0,d1
mn10300_dcache_flush_range:
movm [d2,d3],(sp)
movhu (CHCTR),d2
btst CHCTR_DCEN,d2
beq mn10300_dcache_flush_range_end
# round start addr down
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
mov d0,a1
add L1_CACHE_BYTES,d1 # round end addr up
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
# write a request to flush all instances of an address from the cache
mov DCACHE_PURGE(0,0),a0
mov a1,d0
and L1_CACHE_TAG_ENTRY,d0
add d0,a0 # starting dcache purge control
# reg address
sub a1,d1
lsr L1_CACHE_SHIFT,d1 # total number of entries to
# examine
or L1_CACHE_TAG_VALID,a1 # retain valid entries in the
# cache
mn10300_dcache_flush_range_loop:
mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
# all ways
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
add -1,d1
bne mn10300_dcache_flush_range_loop
mn10300_dcache_flush_range_end:
ret [d2,d3],8
###############################################################################
#
# void mn10300_dcache_flush_inv(void)
# Flush the entire data cache and invalidate all entries
#
###############################################################################
ALIGN
mn10300_dcache_flush_inv:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_dcache_flush_inv_end
# hit each line in the dcache with an unconditional purge
mov DCACHE_PURGE(0,0),a1 # dcache purge request address
mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
mn10300_dcache_flush_inv_loop:
mov (a1),d0 # unconditional purge
add L1_CACHE_BYTES,a1
add -1,d1
bne mn10300_dcache_flush_inv_loop
mn10300_dcache_flush_inv_end:
ret [],0
###############################################################################
#
# void mn10300_dcache_flush_inv_page(unsigned start)
# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end)
# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size)
# Flush and invalidate a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
mn10300_dcache_flush_inv_page:
mov PAGE_SIZE,d1
mn10300_dcache_flush_inv_range2:
add d0,d1
mn10300_dcache_flush_inv_range:
movm [d2,d3],(sp)
movhu (CHCTR),d2
btst CHCTR_DCEN,d2
beq mn10300_dcache_flush_inv_range_end
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
# addr down
mov d0,a1
add L1_CACHE_BYTES,d1 # round end addr up
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
# write a request to flush and invalidate all instances of an address
# from the cache
mov DCACHE_PURGE(0,0),a0
mov a1,d0
and L1_CACHE_TAG_ENTRY,d0
add d0,a0 # starting dcache purge control
# reg address
sub a1,d1
lsr L1_CACHE_SHIFT,d1 # total number of entries to
# examine
mn10300_dcache_flush_inv_range_loop:
mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
# in all ways
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
add -1,d1
bne mn10300_dcache_flush_inv_range_loop
mn10300_dcache_flush_inv_range_end:
ret [d2,d3],8

356
arch/mn10300/mm/cache-inv-by-reg.S Normal file
Просмотреть файл

@ -0,0 +1,356 @@
/* MN10300 CPU cache invalidation routines, using automatic purge registers
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/irqflags.h>
#include <asm/cacheflush.h>
#define mn10300_local_dcache_inv_range_intr_interval \
+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
#if mn10300_local_dcache_inv_range_intr_interval > 0xff
#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
#endif
.am33_2
#ifndef CONFIG_SMP
.globl mn10300_icache_inv
.globl mn10300_icache_inv_page
.globl mn10300_icache_inv_range
.globl mn10300_icache_inv_range2
.globl mn10300_dcache_inv
.globl mn10300_dcache_inv_page
.globl mn10300_dcache_inv_range
.globl mn10300_dcache_inv_range2
mn10300_icache_inv = mn10300_local_icache_inv
mn10300_icache_inv_page = mn10300_local_icache_inv_page
mn10300_icache_inv_range = mn10300_local_icache_inv_range
mn10300_icache_inv_range2 = mn10300_local_icache_inv_range2
mn10300_dcache_inv = mn10300_local_dcache_inv
mn10300_dcache_inv_page = mn10300_local_dcache_inv_page
mn10300_dcache_inv_range = mn10300_local_dcache_inv_range
mn10300_dcache_inv_range2 = mn10300_local_dcache_inv_range2
#endif /* !CONFIG_SMP */
###############################################################################
#
# void mn10300_local_icache_inv(void)
# Invalidate the entire icache
#
###############################################################################
ALIGN
.globl mn10300_local_icache_inv
.type mn10300_local_icache_inv,@function
mn10300_local_icache_inv:
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_ICEN,d0
beq mn10300_local_icache_inv_end
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
movhu (a0),d0
mn10300_local_icache_inv_end:
ret [],0
.size mn10300_local_icache_inv,.-mn10300_local_icache_inv
###############################################################################
#
# void mn10300_local_dcache_inv(void)
# Invalidate the entire dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_inv
.type mn10300_local_dcache_inv,@function
mn10300_local_dcache_inv:
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_inv_end
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
movhu (a0),d0
mn10300_local_dcache_inv_end:
ret [],0
.size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv
###############################################################################
#
# void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end)
# void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size)
# void mn10300_local_dcache_inv_page(unsigned long start)
# Invalidate a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_inv_page
.globl mn10300_local_dcache_inv_range
.globl mn10300_local_dcache_inv_range2
.type mn10300_local_dcache_inv_page,@function
.type mn10300_local_dcache_inv_range,@function
.type mn10300_local_dcache_inv_range2,@function
mn10300_local_dcache_inv_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_dcache_inv_range2:
add d0,d1
mn10300_local_dcache_inv_range:
# If we are in writeback mode we check the start and end alignments,
# and if they're not cacheline-aligned, we must flush any bits outside
# the range that share cachelines with stuff inside the range
#ifdef CONFIG_MN10300_CACHE_WBACK
btst ~(L1_CACHE_BYTES-1),d0
bne 1f
btst ~(L1_CACHE_BYTES-1),d1
beq 2f
1:
bra mn10300_local_dcache_flush_inv_range
2:
#endif /* CONFIG_MN10300_CACHE_WBACK */
movm [d2,d3,a2],(sp)
mov CHCTR,a0
movhu (a0),d2
btst CHCTR_DCEN,d2
beq mn10300_local_dcache_inv_range_end
# round the addresses out to be full cachelines, unless we're in
# writeback mode, in which case we would be in flush and invalidate by
# now
#ifndef CONFIG_MN10300_CACHE_WBACK
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
# addr down
mov L1_CACHE_BYTES-1,d2
add d2,d1
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1 # round end addr up
#endif /* !CONFIG_MN10300_CACHE_WBACK */
sub d0,d1,d2 # calculate the total size
mov d0,a2 # A2 = start address
mov d1,a1 # A1 = end address
LOCAL_CLI_SAVE(d3)
mov DCPGCR,a0 # make sure the purger isn't busy
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
# skip initial address alignment calculation if address is zero
mov d2,d1
cmp 0,a2
beq 1f
dcivloop:
/* calculate alignsize
*
* alignsize = L1_CACHE_BYTES;
* while (! start & alignsize) {
* alignsize <<=1;
* }
* d1 = alignsize;
*/
mov L1_CACHE_BYTES,d1
lsr 1,d1
setlb
add d1,d1
mov d1,d0
and a2,d0
leq
1:
/* calculate invsize
*
* if (totalsize > alignsize) {
* invsize = alignsize;
* } else {
* invsize = totalsize;
* tmp = 0x80000000;
* while (! invsize & tmp) {
* tmp >>= 1;
* }
* invsize = tmp;
* }
* d1 = invsize
*/
cmp d2,d1
bns 2f
mov d2,d1
mov 0x80000000,d0 # start from 31bit=1
setlb
lsr 1,d0
mov d0,e0
and d1,e0
leq
mov d0,d1
2:
/* set mask
*
* mask = ~(invsize-1);
* DCPGMR = mask;
*/
mov d1,d0
add -1,d0
not d0
mov d0,(DCPGMR)
# invalidate area
mov a2,d0
or DCPGCR_DCI,d0
mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCI
setlb # wait for the purge to complete
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
sub d1,d2 # decrease size remaining
add d1,a2 # increase next start address
/* check invalidating of end address
*
* a2 = a2 + invsize
* if (a2 < end) {
* goto dcivloop;
* } */
cmp a1,a2
bns dcivloop
LOCAL_IRQ_RESTORE(d3)
mn10300_local_dcache_inv_range_end:
ret [d2,d3,a2],12
.size mn10300_local_dcache_inv_page,.-mn10300_local_dcache_inv_page
.size mn10300_local_dcache_inv_range,.-mn10300_local_dcache_inv_range
.size mn10300_local_dcache_inv_range2,.-mn10300_local_dcache_inv_range2
###############################################################################
#
# void mn10300_local_icache_inv_page(unsigned long start)
# void mn10300_local_icache_inv_range2(unsigned long start, unsigned long size)
# void mn10300_local_icache_inv_range(unsigned long start, unsigned long end)
# Invalidate a range of addresses on a page in the icache
#
###############################################################################
ALIGN
.globl mn10300_local_icache_inv_page
.globl mn10300_local_icache_inv_range
.globl mn10300_local_icache_inv_range2
.type mn10300_local_icache_inv_page,@function
.type mn10300_local_icache_inv_range,@function
.type mn10300_local_icache_inv_range2,@function
mn10300_local_icache_inv_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_icache_inv_range2:
add d0,d1
mn10300_local_icache_inv_range:
movm [d2,d3,a2],(sp)
mov CHCTR,a0
movhu (a0),d2
btst CHCTR_ICEN,d2
beq mn10300_local_icache_inv_range_reg_end
/* calculate alignsize
*
* alignsize = L1_CACHE_BYTES;
* for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1) {
* alignsize <<= 1;
* }
* d2 = alignsize;
*/
mov L1_CACHE_BYTES,d2
sub d0,d1,d3
add -1,d3
lsr L1_CACHE_SHIFT,d3
beq 2f
1:
add d2,d2
lsr 1,d3
bne 1b
2:
/* a1 = end */
mov d1,a1
LOCAL_CLI_SAVE(d3)
mov ICIVCR,a0
/* wait for busy bit of area invalidation */
setlb
mov (a0),d1
btst ICIVCR_ICIVBSY,d1
lne
/* set mask
*
* mask = ~(alignsize-1);
* ICIVMR = mask;
*/
mov d2,d1
add -1,d1
not d1
mov d1,(ICIVMR)
/* a2 = mask & start */
and d1,d0,a2
icivloop:
/* area invalidate
*
* ICIVCR = (mask & start) | ICIVCR_ICI
*/
mov a2,d0
or ICIVCR_ICI,d0
mov d0,(a0)
/* wait for busy bit of area invalidation */
setlb
mov (a0),d1
btst ICIVCR_ICIVBSY,d1
lne
/* check invalidating of end address
*
* a2 = a2 + alignsize
* if (a2 < end) {
* goto icivloop;
* } */
add d2,a2
cmp a1,a2
bns icivloop
LOCAL_IRQ_RESTORE(d3)
mn10300_local_icache_inv_range_reg_end:
ret [d2,d3,a2],12
.size mn10300_local_icache_inv_page,.-mn10300_local_icache_inv_page
.size mn10300_local_icache_inv_range,.-mn10300_local_icache_inv_range
.size mn10300_local_icache_inv_range2,.-mn10300_local_icache_inv_range2

348
arch/mn10300/mm/cache-inv-by-tag.S Normal file
Просмотреть файл

@ -0,0 +1,348 @@
/* MN10300 CPU core caching routines
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/irqflags.h>
#include <asm/cacheflush.h>
#define mn10300_local_dcache_inv_range_intr_interval \
+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
#if mn10300_local_dcache_inv_range_intr_interval > 0xff
#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
#endif
.am33_2
.globl mn10300_local_icache_inv_page
.globl mn10300_local_icache_inv_range
.globl mn10300_local_icache_inv_range2
mn10300_local_icache_inv_page = mn10300_local_icache_inv
mn10300_local_icache_inv_range = mn10300_local_icache_inv
mn10300_local_icache_inv_range2 = mn10300_local_icache_inv
#ifndef CONFIG_SMP
.globl mn10300_icache_inv
.globl mn10300_icache_inv_page
.globl mn10300_icache_inv_range
.globl mn10300_icache_inv_range2
.globl mn10300_dcache_inv
.globl mn10300_dcache_inv_page
.globl mn10300_dcache_inv_range
.globl mn10300_dcache_inv_range2
mn10300_icache_inv = mn10300_local_icache_inv
mn10300_icache_inv_page = mn10300_local_icache_inv_page
mn10300_icache_inv_range = mn10300_local_icache_inv_range
mn10300_icache_inv_range2 = mn10300_local_icache_inv_range2
mn10300_dcache_inv = mn10300_local_dcache_inv
mn10300_dcache_inv_page = mn10300_local_dcache_inv_page
mn10300_dcache_inv_range = mn10300_local_dcache_inv_range
mn10300_dcache_inv_range2 = mn10300_local_dcache_inv_range2
#endif /* !CONFIG_SMP */
###############################################################################
#
# void mn10300_local_icache_inv(void)
# Invalidate the entire icache
#
###############################################################################
ALIGN
.globl mn10300_local_icache_inv
.type mn10300_local_icache_inv,@function
mn10300_local_icache_inv:
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_ICEN,d0
beq mn10300_local_icache_inv_end
#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
LOCAL_CLI_SAVE(d1)
# disable the icache
and ~CHCTR_ICEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
# wait for the cache to finish
mov CHCTR,a0
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# and reenable it
and ~CHCTR_ICINV,d0
or CHCTR_ICEN,d0
movhu d0,(a0)
movhu (a0),d0
LOCAL_IRQ_RESTORE(d1)
#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
movhu (a0),d0
#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
mn10300_local_icache_inv_end:
ret [],0
.size mn10300_local_icache_inv,.-mn10300_local_icache_inv
###############################################################################
#
# void mn10300_local_dcache_inv(void)
# Invalidate the entire dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_inv
.type mn10300_local_dcache_inv,@function
mn10300_local_dcache_inv:
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_inv_end
#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
LOCAL_CLI_SAVE(d1)
# disable the dcache
and ~CHCTR_DCEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
# wait for the cache to finish
mov CHCTR,a0
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# and reenable it
and ~CHCTR_DCINV,d0
or CHCTR_DCEN,d0
movhu d0,(a0)
movhu (a0),d0
LOCAL_IRQ_RESTORE(d1)
#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
movhu (a0),d0
#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
mn10300_local_dcache_inv_end:
ret [],0
.size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv
###############################################################################
#
# void mn10300_local_dcache_inv_range(unsigned long start, unsigned long end)
# void mn10300_local_dcache_inv_range2(unsigned long start, unsigned long size)
# void mn10300_local_dcache_inv_page(unsigned long start)
# Invalidate a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_inv_page
.globl mn10300_local_dcache_inv_range
.globl mn10300_local_dcache_inv_range2
.type mn10300_local_dcache_inv_page,@function
.type mn10300_local_dcache_inv_range,@function
.type mn10300_local_dcache_inv_range2,@function
mn10300_local_dcache_inv_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_dcache_inv_range2:
add d0,d1
mn10300_local_dcache_inv_range:
# If we are in writeback mode we check the start and end alignments,
# and if they're not cacheline-aligned, we must flush any bits outside
# the range that share cachelines with stuff inside the range
#ifdef CONFIG_MN10300_CACHE_WBACK
btst ~(L1_CACHE_BYTES-1),d0
bne 1f
btst ~(L1_CACHE_BYTES-1),d1
beq 2f
1:
bra mn10300_local_dcache_flush_inv_range
2:
#endif /* CONFIG_MN10300_CACHE_WBACK */
movm [d2,d3,a2],(sp)
mov CHCTR,a2
movhu (a2),d2
btst CHCTR_DCEN,d2
beq mn10300_local_dcache_inv_range_end
#ifndef CONFIG_MN10300_CACHE_WBACK
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
# addr down
add L1_CACHE_BYTES,d1 # round end addr up
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
#endif /* !CONFIG_MN10300_CACHE_WBACK */
mov d0,a1
clr d2 # we're going to clear tag RAM
# entries
# read the tags from the tag RAM, and if they indicate a valid dirty
# cache line then invalidate that line
mov DCACHE_TAG(0,0),a0
mov a1,d0
and L1_CACHE_TAG_ENTRY,d0
add d0,a0 # starting dcache tag RAM
# access address
sub a1,d1
lsr L1_CACHE_SHIFT,d1 # total number of entries to
# examine
and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
mn10300_local_dcache_inv_range_outer_loop:
LOCAL_CLI_SAVE(d3)
# disable the dcache
movhu (a2),d0
and ~CHCTR_DCEN,d0
movhu d0,(a2)
# and wait for it to calm down
setlb
movhu (a2),d0
btst CHCTR_DCBUSY,d0
lne
mn10300_local_dcache_inv_range_loop:
# process the way 0 slot
mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_local_dcache_inv_range_skip_0 # jump if this cacheline
# is not valid
xor a1,d0
lsr 12,d0
bne mn10300_local_dcache_inv_range_skip_0 # jump if not this cacheline
mov d2,(L1_CACHE_WAYDISP*0,a0) # kill the tag
mn10300_local_dcache_inv_range_skip_0:
# process the way 1 slot
mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_local_dcache_inv_range_skip_1 # jump if this cacheline
# is not valid
xor a1,d0
lsr 12,d0
bne mn10300_local_dcache_inv_range_skip_1 # jump if not this cacheline
mov d2,(L1_CACHE_WAYDISP*1,a0) # kill the tag
mn10300_local_dcache_inv_range_skip_1:
# process the way 2 slot
mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_local_dcache_inv_range_skip_2 # jump if this cacheline
# is not valid
xor a1,d0
lsr 12,d0
bne mn10300_local_dcache_inv_range_skip_2 # jump if not this cacheline
mov d2,(L1_CACHE_WAYDISP*2,a0) # kill the tag
mn10300_local_dcache_inv_range_skip_2:
# process the way 3 slot
mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_local_dcache_inv_range_skip_3 # jump if this cacheline
# is not valid
xor a1,d0
lsr 12,d0
bne mn10300_local_dcache_inv_range_skip_3 # jump if not this cacheline
mov d2,(L1_CACHE_WAYDISP*3,a0) # kill the tag
mn10300_local_dcache_inv_range_skip_3:
# approx every N steps we re-enable the cache and see if there are any
# interrupts to be processed
# we also break out if we've reached the end of the loop
# (the bottom nibble of the count is zero in both cases)
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
and ~L1_CACHE_WAYDISP,a0
add -1,d1
btst mn10300_local_dcache_inv_range_intr_interval,d1
bne mn10300_local_dcache_inv_range_loop
# wait for the cache to finish what it's doing
setlb
movhu (a2),d0
btst CHCTR_DCBUSY,d0
lne
# and reenable it
or CHCTR_DCEN,d0
movhu d0,(a2)
movhu (a2),d0
# re-enable interrupts
# - we don't bother with delay NOPs as we'll have enough instructions
# before we disable interrupts again to give the interrupts a chance
# to happen
LOCAL_IRQ_RESTORE(d3)
# go around again if the counter hasn't yet reached zero
add 0,d1
bne mn10300_local_dcache_inv_range_outer_loop
mn10300_local_dcache_inv_range_end:
ret [d2,d3,a2],12
.size mn10300_local_dcache_inv_page,.-mn10300_local_dcache_inv_page
.size mn10300_local_dcache_inv_range,.-mn10300_local_dcache_inv_range
.size mn10300_local_dcache_inv_range2,.-mn10300_local_dcache_inv_range2

129
arch/mn10300/mm/cache-inv-icache.c Normal file
Просмотреть файл

@ -0,0 +1,129 @@
/* Invalidate icache when dcache doesn't need invalidation as it's in
* write-through mode
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/cacheflush.h>
#include <asm/smp.h>
#include "cache-smp.h"
/**
* flush_icache_page_range - Flush dcache and invalidate icache for part of a
* single page
* @start: The starting virtual address of the page part.
* @end: The ending virtual address of the page part.
*
* Invalidate the icache for part of a single page, as determined by the
* virtual addresses given. The page must be in the paged area. The dcache is
* not flushed as the cache must be in write-through mode to get here.
*/
static void flush_icache_page_range(unsigned long start, unsigned long end)
{
unsigned long addr, size, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
/* work out how much of the page to flush */
off = start & ~PAGE_MASK;
size = end - start;
/* get the physical address the page is mapped to from the page
* tables */
pgd = pgd_offset(current->mm, start);
if (!pgd || !pgd_val(*pgd))
return;
pud = pud_offset(pgd, start);
if (!pud || !pud_val(*pud))
return;
pmd = pmd_offset(pud, start);
if (!pmd || !pmd_val(*pmd))
return;
ppte = pte_offset_map(pmd, start);
if (!ppte)
return;
pte = *ppte;
pte_unmap(ppte);
if (pte_none(pte))
return;
page = pte_page(pte);
if (!page)
return;
addr = page_to_phys(page);
/* invalidate the icache coverage on that region */
mn10300_local_icache_inv_range2(addr + off, size);
smp_cache_call(SMP_ICACHE_INV_FLUSH_RANGE, start, end);
}
/**
* flush_icache_range - Globally flush dcache and invalidate icache for region
* @start: The starting virtual address of the region.
* @end: The ending virtual address of the region.
*
* This is used by the kernel to globally flush some code it has just written
* from the dcache back to RAM and then to globally invalidate the icache over
* that region so that that code can be run on all CPUs in the system.
*/
void flush_icache_range(unsigned long start, unsigned long end)
{
unsigned long start_page, end_page;
unsigned long flags;
flags = smp_lock_cache();
if (end > 0x80000000UL) {
/* addresses above 0xa0000000 do not go through the cache */
if (end > 0xa0000000UL) {
end = 0xa0000000UL;
if (start >= end)
goto done;
}
/* kernel addresses between 0x80000000 and 0x9fffffff do not
* require page tables, so we just map such addresses
* directly */
start_page = (start >= 0x80000000UL) ? start : 0x80000000UL;
mn10300_icache_inv_range(start_page, end);
smp_cache_call(SMP_ICACHE_INV_FLUSH_RANGE, start, end);
if (start_page == start)
goto done;
end = start_page;
}
start_page = start & PAGE_MASK;
end_page = (end - 1) & PAGE_MASK;
if (start_page == end_page) {
/* the first and last bytes are on the same page */
flush_icache_page_range(start, end);
} else if (start_page + 1 == end_page) {
/* split over two virtually contiguous pages */
flush_icache_page_range(start, end_page);
flush_icache_page_range(end_page, end);
} else {
/* more than 2 pages; just flush the entire cache */
mn10300_local_icache_inv();
smp_cache_call(SMP_ICACHE_INV, 0, 0);
}
done:
smp_unlock_cache(flags);
}
EXPORT_SYMBOL(flush_icache_range);

289
arch/mn10300/mm/cache-mn10300.S
Просмотреть файл

@ -1,289 +0,0 @@
/* MN10300 CPU core caching routines
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/cache.h>
#define mn10300_dcache_inv_range_intr_interval \
+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
#if mn10300_dcache_inv_range_intr_interval > 0xff
#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
#endif
.am33_2
.globl mn10300_icache_inv
.globl mn10300_dcache_inv
.globl mn10300_dcache_inv_range
.globl mn10300_dcache_inv_range2
.globl mn10300_dcache_inv_page
###############################################################################
#
# void mn10300_icache_inv(void)
# Invalidate the entire icache
#
###############################################################################
ALIGN
mn10300_icache_inv:
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_ICEN,d0
beq mn10300_icache_inv_end
mov epsw,d1
and ~EPSW_IE,epsw
nop
nop
# disable the icache
and ~CHCTR_ICEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
# wait for the cache to finish
mov CHCTR,a0
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# and reenable it
and ~CHCTR_ICINV,d0
or CHCTR_ICEN,d0
movhu d0,(a0)
movhu (a0),d0
mov d1,epsw
mn10300_icache_inv_end:
ret [],0
###############################################################################
#
# void mn10300_dcache_inv(void)
# Invalidate the entire dcache
#
###############################################################################
ALIGN
mn10300_dcache_inv:
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_DCEN,d0
beq mn10300_dcache_inv_end
mov epsw,d1
and ~EPSW_IE,epsw
nop
nop
# disable the dcache
and ~CHCTR_DCEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
# wait for the cache to finish
mov CHCTR,a0
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# and reenable it
and ~CHCTR_DCINV,d0
or CHCTR_DCEN,d0
movhu d0,(a0)
movhu (a0),d0
mov d1,epsw
mn10300_dcache_inv_end:
ret [],0
###############################################################################
#
# void mn10300_dcache_inv_range(unsigned start, unsigned end)
# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
# void mn10300_dcache_inv_page(unsigned start)
# Invalidate a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
mn10300_dcache_inv_page:
mov PAGE_SIZE,d1
mn10300_dcache_inv_range2:
add d0,d1
mn10300_dcache_inv_range:
movm [d2,d3,a2],(sp)
mov CHCTR,a2
movhu (a2),d2
btst CHCTR_DCEN,d2
beq mn10300_dcache_inv_range_end
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
# addr down
mov d0,a1
add L1_CACHE_BYTES,d1 # round end addr up
and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
clr d2 # we're going to clear tag ram
# entries
# read the tags from the tag RAM, and if they indicate a valid dirty
# cache line then invalidate that line
mov DCACHE_TAG(0,0),a0
mov a1,d0
and L1_CACHE_TAG_ENTRY,d0
add d0,a0 # starting dcache tag RAM
# access address
sub a1,d1
lsr L1_CACHE_SHIFT,d1 # total number of entries to
# examine
and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
mn10300_dcache_inv_range_outer_loop:
# disable interrupts
mov epsw,d3
and ~EPSW_IE,epsw
nop # note that reading CHCTR and
# AND'ing D0 occupy two delay
# slots after disabling
# interrupts
# disable the dcache
movhu (a2),d0
and ~CHCTR_DCEN,d0
movhu d0,(a2)
# and wait for it to calm down
setlb
movhu (a2),d0
btst CHCTR_DCBUSY,d0
lne
mn10300_dcache_inv_range_loop:
# process the way 0 slot
mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
# valid
xor a1,d0
lsr 12,d0
bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
mov d2,(a0) # kill the tag
mn10300_dcache_inv_range_skip_0:
# process the way 1 slot
mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
# valid
xor a1,d0
lsr 12,d0
bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
mov d2,(a0) # kill the tag
mn10300_dcache_inv_range_skip_1:
# process the way 2 slot
mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
# valid
xor a1,d0
lsr 12,d0
bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
mov d2,(a0) # kill the tag
mn10300_dcache_inv_range_skip_2:
# process the way 3 slot
mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot
btst L1_CACHE_TAG_VALID,d0
beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
# valid
xor a1,d0
lsr 12,d0
bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
mov d2,(a0) # kill the tag
mn10300_dcache_inv_range_skip_3:
# approx every N steps we re-enable the cache and see if there are any
# interrupts to be processed
# we also break out if we've reached the end of the loop
# (the bottom nibble of the count is zero in both cases)
add L1_CACHE_BYTES,a0
add L1_CACHE_BYTES,a1
add -1,d1
btst mn10300_dcache_inv_range_intr_interval,d1
bne mn10300_dcache_inv_range_loop
# wait for the cache to finish what it's doing
setlb
movhu (a2),d0
btst CHCTR_DCBUSY,d0
lne
# and reenable it
or CHCTR_DCEN,d0
movhu d0,(a2)
movhu (a2),d0
# re-enable interrupts
# - we don't bother with delay NOPs as we'll have enough instructions
# before we disable interrupts again to give the interrupts a chance
# to happen
mov d3,epsw
# go around again if the counter hasn't yet reached zero
add 0,d1
bne mn10300_dcache_inv_range_outer_loop
mn10300_dcache_inv_range_end:
ret [d2,d3,a2],12

156
arch/mn10300/mm/cache-smp-flush.c Normal file
Просмотреть файл

@ -0,0 +1,156 @@
/* Functions for global dcache flush when writeback caching in SMP
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/mm.h>
#include <asm/cacheflush.h>
#include "cache-smp.h"
/**
* mn10300_dcache_flush - Globally flush data cache
*
* Flush the data cache on all CPUs.
*/
void mn10300_dcache_flush(void)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_flush();
smp_cache_call(SMP_DCACHE_FLUSH, 0, 0);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_flush_page - Globally flush a page of data cache
* @start: The address of the page of memory to be flushed.
*
* Flush a range of addresses in the data cache on all CPUs covering
* the page that includes the given address.
*/
void mn10300_dcache_flush_page(unsigned long start)
{
unsigned long flags;
start &= ~(PAGE_SIZE-1);
flags = smp_lock_cache();
mn10300_local_dcache_flush_page(start);
smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, start + PAGE_SIZE);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_flush_range - Globally flush range of data cache
* @start: The start address of the region to be flushed.
* @end: The end address of the region to be flushed.
*
* Flush a range of addresses in the data cache on all CPUs, between start and
* end-1 inclusive.
*/
void mn10300_dcache_flush_range(unsigned long start, unsigned long end)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_flush_range(start, end);
smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, end);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_flush_range2 - Globally flush range of data cache
* @start: The start address of the region to be flushed.
* @size: The size of the region to be flushed.
*
* Flush a range of addresses in the data cache on all CPUs, between start and
* start+size-1 inclusive.
*/
void mn10300_dcache_flush_range2(unsigned long start, unsigned long size)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_flush_range2(start, size);
smp_cache_call(SMP_DCACHE_FLUSH_RANGE, start, start + size);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_flush_inv - Globally flush and invalidate data cache
*
* Flush and invalidate the data cache on all CPUs.
*/
void mn10300_dcache_flush_inv(void)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_flush_inv();
smp_cache_call(SMP_DCACHE_FLUSH_INV, 0, 0);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_flush_inv_page - Globally flush and invalidate a page of data
* cache
* @start: The address of the page of memory to be flushed and invalidated.
*
* Flush and invalidate a range of addresses in the data cache on all CPUs
* covering the page that includes the given address.
*/
void mn10300_dcache_flush_inv_page(unsigned long start)
{
unsigned long flags;
start &= ~(PAGE_SIZE-1);
flags = smp_lock_cache();
mn10300_local_dcache_flush_inv_page(start);
smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, start + PAGE_SIZE);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_flush_inv_range - Globally flush and invalidate range of data
* cache
* @start: The start address of the region to be flushed and invalidated.
* @end: The end address of the region to be flushed and invalidated.
*
* Flush and invalidate a range of addresses in the data cache on all CPUs,
* between start and end-1 inclusive.
*/
void mn10300_dcache_flush_inv_range(unsigned long start, unsigned long end)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_flush_inv_range(start, end);
smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, end);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_flush_inv_range2 - Globally flush and invalidate range of data
* cache
* @start: The start address of the region to be flushed and invalidated.
* @size: The size of the region to be flushed and invalidated.
*
* Flush and invalidate a range of addresses in the data cache on all CPUs,
* between start and start+size-1 inclusive.
*/
void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long size)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_flush_inv_range2(start, size);
smp_cache_call(SMP_DCACHE_FLUSH_INV_RANGE, start, start + size);
smp_unlock_cache(flags);
}

153
arch/mn10300/mm/cache-smp-inv.c Normal file
Просмотреть файл

@ -0,0 +1,153 @@
/* Functions for global i/dcache invalidation when caching in SMP
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/mm.h>
#include <asm/cacheflush.h>
#include "cache-smp.h"
/**
* mn10300_icache_inv - Globally invalidate instruction cache
*
* Invalidate the instruction cache on all CPUs.
*/
void mn10300_icache_inv(void)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_icache_inv();
smp_cache_call(SMP_ICACHE_INV, 0, 0);
smp_unlock_cache(flags);
}
/**
* mn10300_icache_inv_page - Globally invalidate a page of instruction cache
* @start: The address of the page of memory to be invalidated.
*
* Invalidate a range of addresses in the instruction cache on all CPUs
* covering the page that includes the given address.
*/
void mn10300_icache_inv_page(unsigned long start)
{
unsigned long flags;
start &= ~(PAGE_SIZE-1);
flags = smp_lock_cache();
mn10300_local_icache_inv_page(start);
smp_cache_call(SMP_ICACHE_INV_RANGE, start, start + PAGE_SIZE);
smp_unlock_cache(flags);
}
/**
* mn10300_icache_inv_range - Globally invalidate range of instruction cache
* @start: The start address of the region to be invalidated.
* @end: The end address of the region to be invalidated.
*
* Invalidate a range of addresses in the instruction cache on all CPUs,
* between start and end-1 inclusive.
*/
void mn10300_icache_inv_range(unsigned long start, unsigned long end)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_icache_inv_range(start, end);
smp_cache_call(SMP_ICACHE_INV_RANGE, start, end);
smp_unlock_cache(flags);
}
/**
* mn10300_icache_inv_range2 - Globally invalidate range of instruction cache
* @start: The start address of the region to be invalidated.
* @size: The size of the region to be invalidated.
*
* Invalidate a range of addresses in the instruction cache on all CPUs,
* between start and start+size-1 inclusive.
*/
void mn10300_icache_inv_range2(unsigned long start, unsigned long size)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_icache_inv_range2(start, size);
smp_cache_call(SMP_ICACHE_INV_RANGE, start, start + size);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_inv - Globally invalidate data cache
*
* Invalidate the data cache on all CPUs.
*/
void mn10300_dcache_inv(void)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_inv();
smp_cache_call(SMP_DCACHE_INV, 0, 0);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_inv_page - Globally invalidate a page of data cache
* @start: The address of the page of memory to be invalidated.
*
* Invalidate a range of addresses in the data cache on all CPUs covering the
* page that includes the given address.
*/
void mn10300_dcache_inv_page(unsigned long start)
{
unsigned long flags;
start &= ~(PAGE_SIZE-1);
flags = smp_lock_cache();
mn10300_local_dcache_inv_page(start);
smp_cache_call(SMP_DCACHE_INV_RANGE, start, start + PAGE_SIZE);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_inv_range - Globally invalidate range of data cache
* @start: The start address of the region to be invalidated.
* @end: The end address of the region to be invalidated.
*
* Invalidate a range of addresses in the data cache on all CPUs, between start
* and end-1 inclusive.
*/
void mn10300_dcache_inv_range(unsigned long start, unsigned long end)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_inv_range(start, end);
smp_cache_call(SMP_DCACHE_INV_RANGE, start, end);
smp_unlock_cache(flags);
}
/**
* mn10300_dcache_inv_range2 - Globally invalidate range of data cache
* @start: The start address of the region to be invalidated.
* @size: The size of the region to be invalidated.
*
* Invalidate a range of addresses in the data cache on all CPUs, between start
* and start+size-1 inclusive.
*/
void mn10300_dcache_inv_range2(unsigned long start, unsigned long size)
{
unsigned long flags;
flags = smp_lock_cache();
mn10300_local_dcache_inv_range2(start, size);
smp_cache_call(SMP_DCACHE_INV_RANGE, start, start + size);
smp_unlock_cache(flags);
}

105
arch/mn10300/mm/cache-smp.c Normal file
Просмотреть файл

@ -0,0 +1,105 @@
/* SMP global caching code
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/threads.h>
#include <linux/interrupt.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/smp.h>
#include "cache-smp.h"
DEFINE_SPINLOCK(smp_cache_lock);
static unsigned long smp_cache_mask;
static unsigned long smp_cache_start;
static unsigned long smp_cache_end;
static cpumask_t smp_cache_ipi_map; /* Bitmask of cache IPI done CPUs */
/**
* smp_cache_interrupt - Handle IPI request to flush caches.
*
* Handle a request delivered by IPI to flush the current CPU's
* caches. The parameters are stored in smp_cache_*.
*/
void smp_cache_interrupt(void)
{
unsigned long opr_mask = smp_cache_mask;
switch ((enum smp_dcache_ops)(opr_mask & SMP_DCACHE_OP_MASK)) {
case SMP_DCACHE_NOP:
break;
case SMP_DCACHE_INV:
mn10300_local_dcache_inv();
break;
case SMP_DCACHE_INV_RANGE:
mn10300_local_dcache_inv_range(smp_cache_start, smp_cache_end);
break;
case SMP_DCACHE_FLUSH:
mn10300_local_dcache_flush();
break;
case SMP_DCACHE_FLUSH_RANGE:
mn10300_local_dcache_flush_range(smp_cache_start,
smp_cache_end);
break;
case SMP_DCACHE_FLUSH_INV:
mn10300_local_dcache_flush_inv();
break;
case SMP_DCACHE_FLUSH_INV_RANGE:
mn10300_local_dcache_flush_inv_range(smp_cache_start,
smp_cache_end);
break;
}
switch ((enum smp_icache_ops)(opr_mask & SMP_ICACHE_OP_MASK)) {
case SMP_ICACHE_NOP:
break;
case SMP_ICACHE_INV:
mn10300_local_icache_inv();
break;
case SMP_ICACHE_INV_RANGE:
mn10300_local_icache_inv_range(smp_cache_start, smp_cache_end);
break;
}
cpu_clear(smp_processor_id(), smp_cache_ipi_map);
}
/**
* smp_cache_call - Issue an IPI to request the other CPUs flush caches
* @opr_mask: Cache operation flags
* @start: Start address of request
* @end: End address of request
*
* Send cache flush IPI to other CPUs. This invokes smp_cache_interrupt()
* above on those other CPUs and then waits for them to finish.
*
* The caller must hold smp_cache_lock.
*/
void smp_cache_call(unsigned long opr_mask,
unsigned long start, unsigned long end)
{
smp_cache_mask = opr_mask;
smp_cache_start = start;
smp_cache_end = end;
smp_cache_ipi_map = cpu_online_map;
cpu_clear(smp_processor_id(), smp_cache_ipi_map);
send_IPI_allbutself(FLUSH_CACHE_IPI);
while (!cpus_empty(smp_cache_ipi_map))
/* nothing. lockup detection does not belong here */
mb();
}

69
arch/mn10300/mm/cache-smp.h Normal file
Просмотреть файл

@ -0,0 +1,69 @@
/* SMP caching definitions
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
/*
* Operation requests for smp_cache_call().
*
* One of smp_icache_ops and one of smp_dcache_ops can be OR'd together.
*/
enum smp_icache_ops {
SMP_ICACHE_NOP = 0x0000,
SMP_ICACHE_INV = 0x0001,
SMP_ICACHE_INV_RANGE = 0x0002,
};
#define SMP_ICACHE_OP_MASK 0x0003
enum smp_dcache_ops {
SMP_DCACHE_NOP = 0x0000,
SMP_DCACHE_INV = 0x0004,
SMP_DCACHE_INV_RANGE = 0x0008,
SMP_DCACHE_FLUSH = 0x000c,
SMP_DCACHE_FLUSH_RANGE = 0x0010,
SMP_DCACHE_FLUSH_INV = 0x0014,
SMP_DCACHE_FLUSH_INV_RANGE = 0x0018,
};
#define SMP_DCACHE_OP_MASK 0x001c
#define SMP_IDCACHE_INV_FLUSH (SMP_ICACHE_INV | SMP_DCACHE_FLUSH)
#define SMP_IDCACHE_INV_FLUSH_RANGE (SMP_ICACHE_INV_RANGE | SMP_DCACHE_FLUSH_RANGE)
/*
* cache-smp.c
*/
#ifdef CONFIG_SMP
extern spinlock_t smp_cache_lock;
extern void smp_cache_call(unsigned long opr_mask,
unsigned long addr, unsigned long end);
static inline unsigned long smp_lock_cache(void)
__acquires(&smp_cache_lock)
{
unsigned long flags;
spin_lock_irqsave(&smp_cache_lock, flags);
return flags;
}
static inline void smp_unlock_cache(unsigned long flags)
__releases(&smp_cache_lock)
{
spin_unlock_irqrestore(&smp_cache_lock, flags);
}
#else
static inline unsigned long smp_lock_cache(void) { return 0; }
static inline void smp_unlock_cache(unsigned long flags) {}
static inline void smp_cache_call(unsigned long opr_mask,
unsigned long addr, unsigned long end)
{
}
#endif /* CONFIG_SMP */

95
arch/mn10300/mm/cache.c
Просмотреть файл

@ -18,8 +18,13 @@
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/smp.h>
#include "cache-smp.h"
EXPORT_SYMBOL(mn10300_icache_inv);
EXPORT_SYMBOL(mn10300_icache_inv_range);
EXPORT_SYMBOL(mn10300_icache_inv_range2);
EXPORT_SYMBOL(mn10300_icache_inv_page);
EXPORT_SYMBOL(mn10300_dcache_inv);
EXPORT_SYMBOL(mn10300_dcache_inv_range);
EXPORT_SYMBOL(mn10300_dcache_inv_range2);
@ -36,96 +41,6 @@ EXPORT_SYMBOL(mn10300_dcache_flush_range2);
EXPORT_SYMBOL(mn10300_dcache_flush_page);
#endif
/*
* write a page back from the dcache and invalidate the icache so that we can
* run code from it that we've just written into it
*/
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
{
mn10300_dcache_flush_page(page_to_phys(page));
mn10300_icache_inv();
}
EXPORT_SYMBOL(flush_icache_page);
/*
* write some code we've just written back from the dcache and invalidate the
* icache so that we can run that code
*/
void flush_icache_range(unsigned long start, unsigned long end)
{
#ifdef CONFIG_MN10300_CACHE_WBACK
unsigned long addr, size, base, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
if (end > 0x80000000UL) {
/* addresses above 0xa0000000 do not go through the cache */
if (end > 0xa0000000UL) {
end = 0xa0000000UL;
if (start >= end)
return;
}
/* kernel addresses between 0x80000000 and 0x9fffffff do not
* require page tables, so we just map such addresses directly */
base = (start >= 0x80000000UL) ? start : 0x80000000UL;
mn10300_dcache_flush_range(base, end);
if (base == start)
goto invalidate;
end = base;
}
for (; start < end; start += size) {
/* work out how much of the page to flush */
off = start & (PAGE_SIZE - 1);
size = end - start;
if (size > PAGE_SIZE - off)
size = PAGE_SIZE - off;
/* get the physical address the page is mapped to from the page
* tables */
pgd = pgd_offset(current->mm, start);
if (!pgd || !pgd_val(*pgd))
continue;
pud = pud_offset(pgd, start);
if (!pud || !pud_val(*pud))
continue;
pmd = pmd_offset(pud, start);
if (!pmd || !pmd_val(*pmd))
continue;
ppte = pte_offset_map(pmd, start);
if (!ppte)
continue;
pte = *ppte;
pte_unmap(ppte);
if (pte_none(pte))
continue;
page = pte_page(pte);
if (!page)
continue;
addr = page_to_phys(page);
/* flush the dcache and invalidate the icache coverage on that
* region */
mn10300_dcache_flush_range2(addr + off, size);
}
#endif
invalidate:
mn10300_icache_inv();
}
EXPORT_SYMBOL(flush_icache_range);
/*
* allow userspace to flush the instruction cache
*/

17
arch/mn10300/mm/fault.c
Просмотреть файл

@ -39,10 +39,6 @@ void bust_spinlocks(int yes)
{
if (yes) {
oops_in_progress = 1;
#ifdef CONFIG_SMP
/* Many serial drivers do __global_cli() */
global_irq_lock = 0;
#endif
} else {
int loglevel_save = console_loglevel;
#ifdef CONFIG_VT
@ -100,8 +96,6 @@ static void print_pagetable_entries(pgd_t *pgdir, unsigned long address)
}
#endif
asmlinkage void monitor_signal(struct pt_regs *);
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
@ -279,7 +273,6 @@ good_area:
*/
bad_area:
up_read(&mm->mmap_sem);
monitor_signal(regs);
/* User mode accesses just cause a SIGSEGV */
if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
@ -292,7 +285,6 @@ bad_area:
}
no_context:
monitor_signal(regs);
/* Are we prepared to handle this kernel fault? */
if (fixup_exception(regs))
return;
@ -338,14 +330,13 @@ no_context:
*/
out_of_memory:
up_read(&mm->mmap_sem);
if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR)
goto no_context;
pagefault_out_of_memory();
return;
printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
do_exit(SIGKILL);
goto no_context;
do_sigbus:
up_read(&mm->mmap_sem);
monitor_signal(regs);
/*
* Send a sigbus, regardless of whether we were in kernel

26
arch/mn10300/mm/init.c
Просмотреть файл

@ -41,6 +41,10 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
unsigned long highstart_pfn, highend_pfn;
#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
static struct vm_struct user_iomap_vm;
#endif
/*
* set up paging
*/
@ -73,7 +77,24 @@ void __init paging_init(void)
/* pass the memory from the bootmem allocator to the main allocator */
free_area_init(zones_size);
__flush_tlb_all();
#ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT
/* The Atomic Operation Unit registers need to be mapped to userspace
* for all processes. The following uses vm_area_register_early() to
* reserve the first page of the vmalloc area and sets the pte for that
* page.
*
* glibc hardcodes this virtual mapping, so we're pretty much stuck with
* it from now on.
*/
user_iomap_vm.flags = VM_USERMAP;
user_iomap_vm.size = 1 << PAGE_SHIFT;
vm_area_register_early(&user_iomap_vm, PAGE_SIZE);
ppte = kernel_vmalloc_ptes;
set_pte(ppte, pfn_pte(USER_ATOMIC_OPS_PAGE_ADDR >> PAGE_SHIFT,
PAGE_USERIO));
#endif
local_flush_tlb_all();
}
/*
@ -84,8 +105,7 @@ void __init mem_init(void)
int codesize, reservedpages, datasize, initsize;
int tmp;
if (!mem_map)
BUG();
BUG_ON(!mem_map);
#define START_PFN (contig_page_data.bdata->node_min_pfn)
#define MAX_LOW_PFN (contig_page_data.bdata->node_low_pfn)

3
arch/mn10300/mm/misalignment.c
Просмотреть файл

@ -449,8 +449,7 @@ found_opcode:
regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]);
tmp = format_tbl[pop->format].opsz;
if (tmp > noc)
BUG(); /* match was less complete than it ought to have been */
BUG_ON(tmp > noc); /* match was less complete than it ought to have been */
if (tmp < noc) {
tmp = noc - tmp;

41
arch/mn10300/mm/mmu-context.c
Просмотреть файл

@ -13,40 +13,15 @@
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_MN10300_TLB_USE_PIDR
/*
* list of the MMU contexts last allocated on each CPU
*/
unsigned long mmu_context_cache[NR_CPUS] = {
[0 ... NR_CPUS - 1] = MMU_CONTEXT_FIRST_VERSION * 2 - 1,
[0 ... NR_CPUS - 1] =
MMU_CONTEXT_FIRST_VERSION * 2 - (1 - MMU_CONTEXT_TLBPID_LOCK_NR),
};
/*
* flush the specified TLB entry
*/
void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
{
unsigned long pteu, cnx, flags;
addr &= PAGE_MASK;
/* make sure the context doesn't migrate and defend against
* interference from vmalloc'd regions */
local_irq_save(flags);
cnx = mm_context(vma->vm_mm);
if (cnx != MMU_NO_CONTEXT) {
pteu = addr | (cnx & 0x000000ffUL);
IPTEU = pteu;
DPTEU = pteu;
if (IPTEL & xPTEL_V)
IPTEL = 0;
if (DPTEL & xPTEL_V)
DPTEL = 0;
}
local_irq_restore(flags);
}
#endif /* CONFIG_MN10300_TLB_USE_PIDR */
/*
* preemptively set a TLB entry
@ -63,10 +38,16 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *pte
* interference from vmalloc'd regions */
local_irq_save(flags);
cnx = ~MMU_NO_CONTEXT;
#ifdef CONFIG_MN10300_TLB_USE_PIDR
cnx = mm_context(vma->vm_mm);
#endif
if (cnx != MMU_NO_CONTEXT) {
pteu = addr | (cnx & 0x000000ffUL);
pteu = addr;
#ifdef CONFIG_MN10300_TLB_USE_PIDR
pteu |= cnx & MMU_CONTEXT_TLBPID_MASK;
#endif
if (!(pte_val(pte) & _PAGE_NX)) {
IPTEU = pteu;
if (IPTEL & xPTEL_V)

2
arch/mn10300/mm/pgtable.c
Просмотреть файл

@ -59,7 +59,7 @@ void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
* It's enough to flush this one mapping.
* (PGE mappings get flushed as well)
*/
__flush_tlb_one(vaddr);
local_flush_tlb_one(vaddr);
}
pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)

59
arch/mn10300/mm/tlb-mn10300.S
Просмотреть файл

@ -27,7 +27,6 @@
###############################################################################
.type itlb_miss,@function
ENTRY(itlb_miss)
and ~EPSW_NMID,epsw
#ifdef CONFIG_GDBSTUB
movm [d2,d3,a2],(sp)
#else
@ -38,6 +37,12 @@ ENTRY(itlb_miss)
nop
#endif
#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
mov (MMUCTR),d2
mov d2,(MMUCTR)
#endif
and ~EPSW_NMID,epsw
mov (IPTEU),d3
mov (PTBR),a2
mov d3,d2
@ -56,10 +61,16 @@ ENTRY(itlb_miss)
btst _PAGE_VALID,d2
beq itlb_miss_fault # jump if doesn't point to a page
# (might be a swap id)
#if ((_PAGE_ACCESSED & 0xffffff00) == 0)
bset _PAGE_ACCESSED,(0,a2)
and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
#elif ((_PAGE_ACCESSED & 0xffff00ff) == 0)
bset +(_PAGE_ACCESSED >> 8),(1,a2)
#else
#error "_PAGE_ACCESSED value is out of range"
#endif
and ~xPTEL2_UNUSED1,d2
itlb_miss_set:
mov d2,(IPTEL) # change the TLB
mov d2,(IPTEL2) # change the TLB
#ifdef CONFIG_GDBSTUB
movm (sp),[d2,d3,a2]
#endif
@ -79,7 +90,6 @@ itlb_miss_fault:
###############################################################################
.type dtlb_miss,@function
ENTRY(dtlb_miss)
and ~EPSW_NMID,epsw
#ifdef CONFIG_GDBSTUB
movm [d2,d3,a2],(sp)
#else
@ -90,6 +100,12 @@ ENTRY(dtlb_miss)
nop
#endif
#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
mov (MMUCTR),d2
mov d2,(MMUCTR)
#endif
and ~EPSW_NMID,epsw
mov (DPTEU),d3
mov (PTBR),a2
mov d3,d2
@ -108,10 +124,16 @@ ENTRY(dtlb_miss)
btst _PAGE_VALID,d2
beq dtlb_miss_fault # jump if doesn't point to a page
# (might be a swap id)
#if ((_PAGE_ACCESSED & 0xffffff00) == 0)
bset _PAGE_ACCESSED,(0,a2)
and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
#elif ((_PAGE_ACCESSED & 0xffff00ff) == 0)
bset +(_PAGE_ACCESSED >> 8),(1,a2)
#else
#error "_PAGE_ACCESSED value is out of range"
#endif
and ~xPTEL2_UNUSED1,d2
dtlb_miss_set:
mov d2,(DPTEL) # change the TLB
mov d2,(DPTEL2) # change the TLB
#ifdef CONFIG_GDBSTUB
movm (sp),[d2,d3,a2]
#endif
@ -130,9 +152,15 @@ dtlb_miss_fault:
###############################################################################
.type itlb_aerror,@function
ENTRY(itlb_aerror)
and ~EPSW_NMID,epsw
add -4,sp
SAVE_ALL
#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
mov (MMUCTR),d1
mov d1,(MMUCTR)
#endif
and ~EPSW_NMID,epsw
add -4,sp # need to pass three params
# calculate the fault code
@ -140,15 +168,13 @@ ENTRY(itlb_aerror)
or 0x00010000,d1 # it's an instruction fetch
# determine the page address
mov (IPTEU),a2
mov a2,d0
mov (IPTEU),d0
and PAGE_MASK,d0
mov d0,(12,sp)
clr d0
mov d0,(IPTEL)
mov d0,(IPTEL2)
and ~EPSW_NMID,epsw
or EPSW_IE,epsw
mov fp,d0
call do_page_fault[],0 # do_page_fault(regs,code,addr
@ -163,10 +189,16 @@ ENTRY(itlb_aerror)
###############################################################################
.type dtlb_aerror,@function
ENTRY(dtlb_aerror)
and ~EPSW_NMID,epsw
add -4,sp
SAVE_ALL
#if defined(CONFIG_ERRATUM_NEED_TO_RELOAD_MMUCTR)
mov (MMUCTR),d1
mov d1,(MMUCTR)
#endif
add -4,sp # need to pass three params
and ~EPSW_NMID,epsw
# calculate the fault code
movhu (MMUFCR_DFC),d1
@ -178,9 +210,8 @@ ENTRY(dtlb_aerror)
mov d0,(12,sp)
clr d0
mov d0,(DPTEL)
mov d0,(DPTEL2)
and ~EPSW_NMID,epsw
or EPSW_IE,epsw
mov fp,d0
call do_page_fault[],0 # do_page_fault(regs,code,addr

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше