From be215b92703bd730fe3968ae8ee1de2e22ba5b1d Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 28 Oct 2018 13:35:14 +0100 Subject: [PATCH] dt-bindings: timer: meson6_timer: document the clock inputs The Meson Timer IP has two clock inputs: - pclk which is used as "system clock" timebase of Timer E - xtal which is used for the 1us, 10us, 100us and 1ms timebases of Timer A, B, C, D and E The IP block has four internal dividers (XTAL is running at 24MHz): - "xtal div 24" for 1us resolution - "xtal div 240" for 10us resolution - "xtal div 2400" for 100us resolution - "xtal div 24000" for 1ms resolution Suggested-by: Jianxin Pan Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- .../devicetree/bindings/timer/amlogic,meson6-timer.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt index dbdda92cffb7..a9da22bda912 100644 --- a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt +++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt @@ -5,6 +5,8 @@ Required properties: - compatible : should be "amlogic,meson6-timer" - reg : Specifies base physical address and size of the registers. - interrupts : The four interrupts, one for each timer event +- clocks : phandles to the pclk (system clock) and XTAL clocks +- clock-names : must contain "pclk" and "xtal" Example: @@ -15,4 +17,6 @@ timer@c1109940 { , , ; + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "pclk"; };