microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

staging:iio:meter: Drop ADE7759 driver 

I announced the intent to drop some of these meter drivers
on the IIO list last cycle. This device is obsolete and not easily
obtained.  No one has come forward with suitable test hardware and
the driver would need a lot of work to move out of staging.

As such I am dropping it.  We can always bring it back again
if a user / tester emerges in the future.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Jonathan Cameron 2018-05-12 18:51:04 +01:00
Родитель 1f31ee3508
Коммит be3be7814a
3 изменённых файлов: 0 добавлений и 569 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

10
drivers/staging/iio/meter/Kconfig
Просмотреть файл

@ -3,16 +3,6 @@
#
menu "Active energy metering IC"
config ADE7759
tristate "Analog Devices ADE7759 Active Energy Metering IC Driver"
depends on SPI
help
Say yes here to build support for Analog Devices ADE7758 Active Energy
Metering IC with di/dt Sensor Interface.
To compile this driver as a module, choose M here: the
module will be called ade7759.
config ADE7854
tristate "Analog Devices ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver"
depends on SPI || I2C

1
drivers/staging/iio/meter/Makefile
Просмотреть файл

@ -3,7 +3,6 @@
# Makefile for metering ic drivers
#
obj-$(CONFIG_ADE7759) += ade7759.o
obj-$(CONFIG_ADE7854) += ade7854.o
obj-$(CONFIG_ADE7854_I2C) += ade7854-i2c.o
obj-$(CONFIG_ADE7854_SPI) += ade7854-spi.o

558
drivers/staging/iio/meter/ade7759.c
Просмотреть файл

@ -1,558 +0,0 @@
/*
* ADE7759 Active Energy Metering IC with di/dt Sensor Interface Driver
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include "meter.h"
#define ADE7759_WAVEFORM 0x01
#define ADE7759_AENERGY 0x02
#define ADE7759_RSTENERGY 0x03
#define ADE7759_STATUS 0x04
#define ADE7759_RSTSTATUS 0x05
#define ADE7759_MODE 0x06
#define ADE7759_CFDEN 0x07
#define ADE7759_CH1OS 0x08
#define ADE7759_CH2OS 0x09
#define ADE7759_GAIN 0x0A
#define ADE7759_APGAIN 0x0B
#define ADE7759_PHCAL 0x0C
#define ADE7759_APOS 0x0D
#define ADE7759_ZXTOUT 0x0E
#define ADE7759_SAGCYC 0x0F
#define ADE7759_IRQEN 0x10
#define ADE7759_SAGLVL 0x11
#define ADE7759_TEMP 0x12
#define ADE7759_LINECYC 0x13
#define ADE7759_LENERGY 0x14
#define ADE7759_CFNUM 0x15
#define ADE7759_CHKSUM 0x1E
#define ADE7759_DIEREV 0x1F
#define ADE7759_READ_REG(a) a
#define ADE7759_WRITE_REG(a) ((a) | 0x80)
#define ADE7759_MAX_TX 6
#define ADE7759_MAX_RX 6
#define ADE7759_STARTUP_DELAY 1000
#define ADE7759_SPI_SLOW (u32)(300 * 1000)
#define ADE7759_SPI_BURST (u32)(1000 * 1000)
#define ADE7759_SPI_FAST (u32)(2000 * 1000)
/**
* struct ade7759_state - device instance specific data
* @us: actual spi_device
* @buf_lock: mutex to protect tx and rx and write frequency
* @tx: transmit buffer
* @rx: receive buffer
**/
struct ade7759_state {
struct spi_device *us;
struct mutex buf_lock;
u8 tx[ADE7759_MAX_TX] ____cacheline_aligned;
u8 rx[ADE7759_MAX_RX];
};
static int ade7759_spi_write_reg_8(struct device *dev,
u8 reg_address,
u8 val)
{
int ret;
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ade7759_state *st = iio_priv(indio_dev);
mutex_lock(&st->buf_lock);
st->tx[0] = ADE7759_WRITE_REG(reg_address);
st->tx[1] = val;
ret = spi_write(st->us, st->tx, 2);
mutex_unlock(&st->buf_lock);
return ret;
}
/*Unlocked version of ade7759_spi_write_reg_16 function */
static int __ade7759_spi_write_reg_16(struct device *dev,
u8 reg_address,
u16 value)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ade7759_state *st = iio_priv(indio_dev);
st->tx[0] = ADE7759_WRITE_REG(reg_address);
st->tx[1] = (value >> 8) & 0xFF;
st->tx[2] = value & 0xFF;
return spi_write(st->us, st->tx, 3);
}
static int ade7759_spi_write_reg_16(struct device *dev,
u8 reg_address,
u16 value)
{
int ret;
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ade7759_state *st = iio_priv(indio_dev);
mutex_lock(&st->buf_lock);
ret = __ade7759_spi_write_reg_16(dev, reg_address, value);
mutex_unlock(&st->buf_lock);
return ret;
}
static int ade7759_spi_read_reg_8(struct device *dev,
u8 reg_address,
u8 *val)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ade7759_state *st = iio_priv(indio_dev);
int ret;
ret = spi_w8r8(st->us, ADE7759_READ_REG(reg_address));
if (ret < 0) {
dev_err(&st->us->dev,
"problem when reading 8 bit register 0x%02X",
reg_address);
return ret;
}
*val = ret;
return 0;
}
static int ade7759_spi_read_reg_16(struct device *dev,
u8 reg_address,
u16 *val)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ade7759_state *st = iio_priv(indio_dev);
int ret;
ret = spi_w8r16be(st->us, ADE7759_READ_REG(reg_address));
if (ret < 0) {
dev_err(&st->us->dev, "problem when reading 16 bit register 0x%02X",
reg_address);
return ret;
}
*val = ret;
return 0;
}
static int ade7759_spi_read_reg_40(struct device *dev,
u8 reg_address,
u64 *val)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ade7759_state *st = iio_priv(indio_dev);
int ret;
struct spi_transfer xfers[] = {
{
.tx_buf = st->tx,
.rx_buf = st->rx,
.bits_per_word = 8,
.len = 6,
},
};
mutex_lock(&st->buf_lock);
st->tx[0] = ADE7759_READ_REG(reg_address);
memset(&st->tx[1], 0, 5);
ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
if (ret) {
dev_err(&st->us->dev,
"problem when reading 40 bit register 0x%02X",
reg_address);
goto error_ret;
}
*val = ((u64)st->rx[1] << 32) | ((u64)st->rx[2] << 24) |
(st->rx[3] << 16) | (st->rx[4] << 8) | st->rx[5];
error_ret:
mutex_unlock(&st->buf_lock);
return ret;
}
static ssize_t ade7759_read_8bit(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int ret;
u8 val = 0;
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
ret = ade7759_spi_read_reg_8(dev, this_attr->address, &val);
if (ret)
return ret;
return sprintf(buf, "%u\n", val);
}
static ssize_t ade7759_read_16bit(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int ret;
u16 val = 0;
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
ret = ade7759_spi_read_reg_16(dev, this_attr->address, &val);
if (ret)
return ret;
return sprintf(buf, "%u\n", val);
}
static ssize_t ade7759_read_40bit(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int ret;
u64 val = 0;
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
ret = ade7759_spi_read_reg_40(dev, this_attr->address, &val);
if (ret)
return ret;
return sprintf(buf, "%llu\n", val);
}
static ssize_t ade7759_write_8bit(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t len)
{
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
int ret;
u8 val;
ret = kstrtou8(buf, 10, &val);
if (ret)
goto error_ret;
ret = ade7759_spi_write_reg_8(dev, this_attr->address, val);
error_ret:
return ret ? ret : len;
}
static ssize_t ade7759_write_16bit(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t len)
{
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
int ret;
u16 val;
ret = kstrtou16(buf, 10, &val);
if (ret)
goto error_ret;
ret = ade7759_spi_write_reg_16(dev, this_attr->address, val);
error_ret:
return ret ? ret : len;
}
static int ade7759_reset(struct device *dev)
{
int ret;
u16 val;
ret = ade7759_spi_read_reg_16(dev, ADE7759_MODE, &val);
if (ret < 0)
return ret;
val |= BIT(6); /* Software Chip Reset */
return ade7759_spi_write_reg_16(dev,
ADE7759_MODE,
val);
}
static IIO_DEV_ATTR_AENERGY(ade7759_read_40bit, ADE7759_AENERGY);
static IIO_DEV_ATTR_CFDEN(0644,
ade7759_read_16bit,
ade7759_write_16bit,
ADE7759_CFDEN);
static IIO_DEV_ATTR_CFNUM(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_CFNUM);
static IIO_DEV_ATTR_CHKSUM(ade7759_read_8bit, ADE7759_CHKSUM);
static IIO_DEV_ATTR_PHCAL(0644,
ade7759_read_16bit,
ade7759_write_16bit,
ADE7759_PHCAL);
static IIO_DEV_ATTR_APOS(0644,
ade7759_read_16bit,
ade7759_write_16bit,
ADE7759_APOS);
static IIO_DEV_ATTR_SAGCYC(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_SAGCYC);
static IIO_DEV_ATTR_SAGLVL(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_SAGLVL);
static IIO_DEV_ATTR_LINECYC(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_LINECYC);
static IIO_DEV_ATTR_LENERGY(ade7759_read_40bit, ADE7759_LENERGY);
static IIO_DEV_ATTR_PGA_GAIN(0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_GAIN);
static IIO_DEV_ATTR_ACTIVE_POWER_GAIN(0644,
ade7759_read_16bit,
ade7759_write_16bit,
ADE7759_APGAIN);
static IIO_DEVICE_ATTR(choff_1, 0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_CH1OS);
static IIO_DEVICE_ATTR(choff_2, 0644,
ade7759_read_8bit,
ade7759_write_8bit,
ADE7759_CH2OS);
static int ade7759_set_irq(struct device *dev, bool enable)
{
int ret;
u8 irqen;
ret = ade7759_spi_read_reg_8(dev, ADE7759_IRQEN, &irqen);
if (ret)
goto error_ret;
if (enable)
irqen |= BIT(3); /* Enables an interrupt when a data is
* present in the waveform register
*/
else
irqen &= ~BIT(3);
ret = ade7759_spi_write_reg_8(dev, ADE7759_IRQEN, irqen);
error_ret:
return ret;
}
/* Power down the device */
static int ade7759_stop_device(struct device *dev)
{
int ret;
u16 val;
ret = ade7759_spi_read_reg_16(dev, ADE7759_MODE, &val);
if (ret < 0) {
dev_err(dev, "unable to power down the device, error: %d\n",
ret);
return ret;
}
val |= BIT(4); /* AD converters can be turned off */
return ade7759_spi_write_reg_16(dev, ADE7759_MODE, val);
}
static int ade7759_initial_setup(struct iio_dev *indio_dev)
{
int ret;
struct ade7759_state *st = iio_priv(indio_dev);
struct device *dev = &indio_dev->dev;
/* use low spi speed for init */
st->us->mode = SPI_MODE_3;
spi_setup(st->us);
/* Disable IRQ */
ret = ade7759_set_irq(dev, false);
if (ret) {
dev_err(dev, "disable irq failed");
goto err_ret;
}
ade7759_reset(dev);
usleep_range(ADE7759_STARTUP_DELAY, ADE7759_STARTUP_DELAY + 100);
err_ret:
return ret;
}
static ssize_t ade7759_read_frequency(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int ret;
u16 t;
int sps;
ret = ade7759_spi_read_reg_16(dev, ADE7759_MODE, &t);
if (ret)
return ret;
t = (t >> 3) & 0x3;
sps = 27900 / (1 + t);
return sprintf(buf, "%d\n", sps);
}
static ssize_t ade7759_write_frequency(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t len)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ade7759_state *st = iio_priv(indio_dev);
u16 val;
int ret;
u16 reg, t;
ret = kstrtou16(buf, 10, &val);
if (ret)
return ret;
if (!val)
return -EINVAL;
mutex_lock(&st->buf_lock);
t = 27900 / val;
if (t > 0)
t--;
if (t > 1)
st->us->max_speed_hz = ADE7759_SPI_SLOW;
else
st->us->max_speed_hz = ADE7759_SPI_FAST;
ret = ade7759_spi_read_reg_16(dev, ADE7759_MODE, &reg);
if (ret)
goto out;
reg &= ~(3 << 13);
reg |= t << 13;
ret = __ade7759_spi_write_reg_16(dev, ADE7759_MODE, reg);
out:
mutex_unlock(&st->buf_lock);
return ret ? ret : len;
}
static IIO_DEV_ATTR_TEMP_RAW(ade7759_read_8bit);
static IIO_CONST_ATTR(in_temp_offset, "70 C");
static IIO_CONST_ATTR(in_temp_scale, "1 C");
static IIO_DEV_ATTR_SAMP_FREQ(0644,
ade7759_read_frequency,
ade7759_write_frequency);
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("27900 14000 7000 3500");
static struct attribute *ade7759_attributes[] = {
&iio_dev_attr_in_temp_raw.dev_attr.attr,
&iio_const_attr_in_temp_offset.dev_attr.attr,
&iio_const_attr_in_temp_scale.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_phcal.dev_attr.attr,
&iio_dev_attr_cfden.dev_attr.attr,
&iio_dev_attr_aenergy.dev_attr.attr,
&iio_dev_attr_cfnum.dev_attr.attr,
&iio_dev_attr_apos.dev_attr.attr,
&iio_dev_attr_sagcyc.dev_attr.attr,
&iio_dev_attr_saglvl.dev_attr.attr,
&iio_dev_attr_linecyc.dev_attr.attr,
&iio_dev_attr_lenergy.dev_attr.attr,
&iio_dev_attr_chksum.dev_attr.attr,
&iio_dev_attr_pga_gain.dev_attr.attr,
&iio_dev_attr_active_power_gain.dev_attr.attr,
&iio_dev_attr_choff_1.dev_attr.attr,
&iio_dev_attr_choff_2.dev_attr.attr,
NULL,
};
static const struct attribute_group ade7759_attribute_group = {
.attrs = ade7759_attributes,
};
static const struct iio_info ade7759_info = {
.attrs = &ade7759_attribute_group,
};
static int ade7759_probe(struct spi_device *spi)
{
int ret;
struct ade7759_state *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
st = iio_priv(indio_dev);
st->us = spi;
mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &ade7759_info;
indio_dev->modes = INDIO_DIRECT_MODE;
/* Get the device into a sane initial state */
ret = ade7759_initial_setup(indio_dev);
if (ret)
return ret;
return iio_device_register(indio_dev);
}
static int ade7759_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
iio_device_unregister(indio_dev);
ade7759_stop_device(&indio_dev->dev);
return 0;
}
static struct spi_driver ade7759_driver = {
.driver = {
.name = "ade7759",
},
.probe = ade7759_probe,
.remove = ade7759_remove,
};
module_spi_driver(ade7759_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADE7759 Active Energy Metering IC Driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:ad7759");