i2c-pnx.c: Remove duplicated i2c.h

The platforms using i2c-pnx.c both defined a duplicated i2c.h (used nowhere
else). This patch removes those and integrates the contents into the driver
itself.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
This commit is contained in:
Roland Stigge 2012-04-22 11:59:47 +02:00
Родитель 1451ba3a5f
Коммит be460385af
3 изменённых файлов: 46 добавлений и 130 удалений

Просмотреть файл

@ -1,63 +0,0 @@
/*
* PNX4008-specific tweaks for I2C IP3204 block
*
* Author: Vitaly Wool <vwool@ru.mvista.com>
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_I2C_H
#define __ASM_ARCH_I2C_H
enum {
mstatus_tdi = 0x00000001,
mstatus_afi = 0x00000002,
mstatus_nai = 0x00000004,
mstatus_drmi = 0x00000008,
mstatus_active = 0x00000020,
mstatus_scl = 0x00000040,
mstatus_sda = 0x00000080,
mstatus_rff = 0x00000100,
mstatus_rfe = 0x00000200,
mstatus_tff = 0x00000400,
mstatus_tfe = 0x00000800,
};
enum {
mcntrl_tdie = 0x00000001,
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
mcntrl_daie = 0x00000020,
mcntrl_rffie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
};
enum {
rw_bit = 1 << 0,
start_bit = 1 << 8,
stop_bit = 1 << 9,
};
#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
#define I2C_CHIP_NAME "PNX4008-I2C"
#endif /* __ASM_ARCH_I2C_H */

Просмотреть файл

@ -1,64 +0,0 @@
/*
* PNX4008-specific tweaks for I2C IP3204 block
*
* Author: Vitaly Wool <vwool@ru.mvista.com>
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_I2C_H__
#define __ASM_ARCH_I2C_H__
enum {
mstatus_tdi = 0x00000001,
mstatus_afi = 0x00000002,
mstatus_nai = 0x00000004,
mstatus_drmi = 0x00000008,
mstatus_active = 0x00000020,
mstatus_scl = 0x00000040,
mstatus_sda = 0x00000080,
mstatus_rff = 0x00000100,
mstatus_rfe = 0x00000200,
mstatus_tff = 0x00000400,
mstatus_tfe = 0x00000800,
};
enum {
mcntrl_tdie = 0x00000001,
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
mcntrl_daie = 0x00000020,
mcntrl_rffie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
};
enum {
rw_bit = 1 << 0,
start_bit = 1 << 8,
stop_bit = 1 << 9,
};
#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
#define HCLK_MHZ 13
#define I2C_CHIP_NAME "PNX4008-I2C"
#endif /* __ASM_ARCH_I2C_H___ */

Просмотреть файл

@ -24,13 +24,56 @@
#include <linux/clk.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#define I2C_PNX_TIMEOUT 10 /* msec */
#define I2C_PNX_SPEED_KHZ 100
#define I2C_PNX_REGION_SIZE 0x100
enum {
mstatus_tdi = 0x00000001,
mstatus_afi = 0x00000002,
mstatus_nai = 0x00000004,
mstatus_drmi = 0x00000008,
mstatus_active = 0x00000020,
mstatus_scl = 0x00000040,
mstatus_sda = 0x00000080,
mstatus_rff = 0x00000100,
mstatus_rfe = 0x00000200,
mstatus_tff = 0x00000400,
mstatus_tfe = 0x00000800,
};
enum {
mcntrl_tdie = 0x00000001,
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
mcntrl_daie = 0x00000020,
mcntrl_rffie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
};
enum {
rw_bit = 1 << 0,
start_bit = 1 << 8,
stop_bit = 1 << 9,
};
#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
{
while (timeout > 0 &&